From mboxrd@z Thu Jan 1 00:00:00 1970 From: f.fainelli@gmail.com (Florian Fainelli) Date: Fri, 20 Oct 2017 17:16:33 -0700 Subject: [GIT PULL 2/5] Broadcom devicetree changes for 4.15 In-Reply-To: <20171021001636.17662-1-f.fainelli@gmail.com> References: <20171021001636.17662-1-f.fainelli@gmail.com> Message-ID: <20171021001636.17662-2-f.fainelli@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The following changes since commit 2bd6bf03f4c1c59381d62c61d03f6cc3fe71f66e: Linux 4.14-rc1 (2017-09-16 15:47:51 -0700) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.15/devicetree for you to fetch changes up to bc79cce741fab70968141c67974f8e99e31aec47: ARM: dts: Hurricane 2: Add basic support for Ubiquiti UniFi Switch 8 (2017-10-12 11:31:24 -0700) ---------------------------------------------------------------- This pull request contains Broadcom ARM-based Device Tree changes for 4.15, please pull the following: - Eric adds support for the CLCD and PWM controller on Cygnus chis - Loic fixes the console path on the Raspberry Pi 3 (already submitted as fixes) and then proceeds with enabling the BCM43438 bluetooth chip on the Raspberry Pi 3 - Rafal specifies the USB ports on the Luxul XWR-1200 - Dan adds support for the Luxul ABR-4500 based on BCM47094, the Luxul XAP-810 and XAP-1440 both based on BCM53573 - Florian adds support for the Broadcom Hurricane 2 SoC by adding general machine binding, clock binding, SoC DTS include file and a DTS for the Ubiquiti Networks UniFi Switch 8 ---------------------------------------------------------------- Dan Haab (4): ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 ARM: dts: BCM53573: Add DT for Luxul XAP-810 ARM: dts: BCM53573: Add DT for Luxul XAP-1440 Eric Anholt (2): ARM: dts: cygnus: Add the CLCD controller ARM: dts: cygnus: Add the PWM node Florian Fainelli (7): Merge tag 'bcm2835-dt-fixes-2017-10-06' into devicetree/next Merge tag 'bcm2835-dt-next-2017-10-06' into devicetree/next dt-bindings: Add documentation for Broadcom Hurricane 2 SoCs dt-bindings: Document Broadcom Hurricane 2 clocks ARM: dts: Add Broadcom Hurricane 2 DTS include file dt-bindings: Add Ubiquiti Networks vendor prefix ARM: dts: Hurricane 2: Add basic support for Ubiquiti UniFi Switch 8 Loic Poulain (2): ARM: dts: bcm283x: Fix console path on RPi3 ARM: dts: bcm2837-rpi-3-b: Add bcm43438 serial slave Rafa? Mi?ecki (1): ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul XWR-1200 .../devicetree/bindings/arm/bcm/brcm,hr2.txt | 14 + .../bindings/clock/brcm,iproc-clocks.txt | 14 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 6 + arch/arm/boot/dts/bcm-cygnus.dtsi | 18 + arch/arm/boot/dts/bcm-hr2.dtsi | 368 +++++++++++++++++++++ arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 9 +- arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 10 + arch/arm/boot/dts/bcm283x.dtsi | 7 +- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 +- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 ++++ arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 63 ++++ arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 50 +++ arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 87 +++++ arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts | 85 +++++ 15 files changed, 790 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt create mode 100644 arch/arm/boot/dts/bcm-hr2.dtsi create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-810.dts create mode 100644 arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts