All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marcin Niestroj <m.niestroj@grinn-global.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Bastien Nocera <hadess@hadess.net>, Antonio Ospite <ao2@ao2.it>,
	linux-input@vger.kernel.org,
	Marcin Niestroj <m.niestroj@grinn-global.com>
Subject: [PATCH] Input: goodix - use generic touchscreen_properties
Date: Wed, 25 Oct 2017 13:32:17 +0200	[thread overview]
Message-ID: <20171025113217.7814-1-m.niestroj@grinn-global.com> (raw)

Use touchscreen_properties structure instead of implementing all
properties by our own. It allows to reuse generic code for parsing
device-tree properties (which was implemented manually in the driver
for now). Additionally, it allows us to report events using generic
touchscreen_report_pos(), which automatically handles inverted and
swapped axes.

There was also bug in driver in touch position calculation, when axes
were configured as inverted and swapped in the same time. This is
however fixed now, by using touchscreen_report_pos() function, which
handles inversion+swapping correctly.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
---
Patch was developed and tested on top of v4.14-rc6 with
[1] ("Input: goodix - support gt1151 touchpanel") applied.

[1] https://www.spinics.net/lists/devicetree/msg199945.html

 drivers/input/touchscreen/goodix.c | 87 +++++++++++++++-----------------------
 1 file changed, 33 insertions(+), 54 deletions(-)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 69d0b8cbc71f..f82101cd9c04 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -22,6 +22,7 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
@@ -43,11 +44,7 @@ struct goodix_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input_dev;
 	const struct goodix_chip_data *chip;
-	int abs_x_max;
-	int abs_y_max;
-	bool swapped_x_y;
-	bool inverted_x;
-	bool inverted_y;
+	struct touchscreen_properties prop;
 	unsigned int max_touch_num;
 	unsigned int int_trigger_type;
 	struct gpio_desc *gpiod_int;
@@ -295,18 +292,10 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
 	int input_y = get_unaligned_le16(&coor_data[3]);
 	int input_w = get_unaligned_le16(&coor_data[5]);
 
-	/* Inversions have to happen before axis swapping */
-	if (ts->inverted_x)
-		input_x = ts->abs_x_max - input_x;
-	if (ts->inverted_y)
-		input_y = ts->abs_y_max - input_y;
-	if (ts->swapped_x_y)
-		swap(input_x, input_y);
-
 	input_mt_slot(ts->input_dev, id);
 	input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
-	input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_x);
-	input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, input_y);
+	touchscreen_report_pos(ts->input_dev, &ts->prop, input_x, input_y,
+			true);
 	input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w);
 	input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
 }
@@ -579,6 +568,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
 static void goodix_read_config(struct goodix_ts_data *ts)
 {
 	u8 config[GOODIX_CONFIG_MAX_LENGTH];
+	int x_max, y_max;
 	int error;
 
 	error = goodix_i2c_read(ts->client, ts->chip->config_addr,
@@ -587,37 +577,34 @@ static void goodix_read_config(struct goodix_ts_data *ts)
 		dev_warn(&ts->client->dev,
 			 "Error reading config (%d), using defaults\n",
 			 error);
-		ts->abs_x_max = GOODIX_MAX_WIDTH;
-		ts->abs_y_max = GOODIX_MAX_HEIGHT;
-		if (ts->swapped_x_y)
-			swap(ts->abs_x_max, ts->abs_y_max);
+		x_max = GOODIX_MAX_WIDTH;
+		y_max = GOODIX_MAX_HEIGHT;
 		ts->int_trigger_type = GOODIX_INT_TRIGGER;
 		ts->max_touch_num = GOODIX_MAX_CONTACTS;
-		return;
+		goto input_set_params;
 	}
 
-	ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
-	ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
-	if (ts->swapped_x_y)
-		swap(ts->abs_x_max, ts->abs_y_max);
+	x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
+	y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
 	ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
 	ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
-	if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) {
+	if (!x_max || !y_max || !ts->max_touch_num) {
 		dev_err(&ts->client->dev,
 			"Invalid config, using defaults\n");
-		ts->abs_x_max = GOODIX_MAX_WIDTH;
-		ts->abs_y_max = GOODIX_MAX_HEIGHT;
-		if (ts->swapped_x_y)
-			swap(ts->abs_x_max, ts->abs_y_max);
+		x_max = GOODIX_MAX_WIDTH;
+		y_max = GOODIX_MAX_HEIGHT;
 		ts->max_touch_num = GOODIX_MAX_CONTACTS;
 	}
 
-	if (dmi_check_system(rotated_screen)) {
-		ts->inverted_x = true;
-		ts->inverted_y = true;
-		dev_dbg(&ts->client->dev,
-			 "Applying '180 degrees rotated screen' quirk\n");
-	}
+input_set_params:
+	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X,
+			0, x_max - 1, 0, 0);
+	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y,
+			0, y_max - 1, 0, 0);
+	input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
+	input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+	input_mt_init_slots(ts->input_dev, ts->max_touch_num,
+			INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
 }
 
 /**
@@ -692,16 +679,6 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts)
 		return -ENOMEM;
 	}
 
-	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X,
-			     0, ts->abs_x_max, 0, 0);
-	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y,
-			     0, ts->abs_y_max, 0, 0);
-	input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
-	input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
-
-	input_mt_init_slots(ts->input_dev, ts->max_touch_num,
-			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
-
 	ts->input_dev->name = "Goodix Capacitive TouchScreen";
 	ts->input_dev->phys = "input/ts";
 	ts->input_dev->id.bustype = BUS_I2C;
@@ -736,19 +713,21 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
 {
 	int error;
 
-	ts->swapped_x_y = device_property_read_bool(&ts->client->dev,
-						    "touchscreen-swapped-x-y");
-	ts->inverted_x = device_property_read_bool(&ts->client->dev,
-						   "touchscreen-inverted-x");
-	ts->inverted_y = device_property_read_bool(&ts->client->dev,
-						   "touchscreen-inverted-y");
-
-	goodix_read_config(ts);
-
 	error = goodix_request_input_dev(ts);
 	if (error)
 		return error;
 
+	goodix_read_config(ts);
+
+	touchscreen_parse_properties(ts->input_dev, true, &ts->prop);
+
+	if (dmi_check_system(rotated_screen)) {
+		ts->prop.invert_x = true;
+		ts->prop.invert_y = true;
+		dev_dbg(&ts->client->dev,
+			"Applying '180 degrees rotated screen' quirk\n");
+	}
+
 	ts->irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT;
 	error = goodix_request_irq(ts);
 	if (error) {
-- 
2.14.2


             reply	other threads:[~2017-10-25 11:32 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-25 11:32 Marcin Niestroj [this message]
2017-10-25 19:42 ` [PATCH] Input: goodix - use generic touchscreen_properties Bastien Nocera
2017-10-26  8:14   ` Marcin Niestroj
2017-10-26 13:02     ` Bastien Nocera
2017-10-26 13:50       ` Marcin Niestroj
2017-10-26 14:39         ` Bastien Nocera

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171025113217.7814-1-m.niestroj@grinn-global.com \
    --to=m.niestroj@grinn-global.com \
    --cc=ao2@ao2.it \
    --cc=dmitry.torokhov@gmail.com \
    --cc=hadess@hadess.net \
    --cc=linux-input@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.