All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 20/35] qemu-img: Change compare_sectors() to be byte-based
Date: Thu, 26 Oct 2017 15:17:26 +0200	[thread overview]
Message-ID: <20171026131741.5059-21-kwolf@redhat.com> (raw)
In-Reply-To: <20171026131741.5059-1-kwolf@redhat.com>

From: Eric Blake <eblake@redhat.com>

In the continuing quest to make more things byte-based, change
compare_sectors(), renaming it to compare_buffers() in the
process.  Note that one caller (qemu-img compare) only cares
about the first difference, while the other (qemu-img rebase)
cares about how many consecutive sectors have the same
equal/different status; however, this patch does not bother to
micro-optimize the compare case to avoid the comparisons of
sectors beyond the first mismatch.  Both callers are always
passing valid buffers in, so the initial check for buffer size
can be turned into an assertion.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 qemu-img.c | 55 +++++++++++++++++++++++++++----------------------------
 1 file changed, 27 insertions(+), 28 deletions(-)

diff --git a/qemu-img.c b/qemu-img.c
index 66d595be3d..c6b6263853 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -1156,31 +1156,28 @@ static int is_allocated_sectors_min(const uint8_t *buf, int n, int *pnum,
 }
 
 /*
- * Compares two buffers sector by sector. Returns 0 if the first sector of both
- * buffers matches, non-zero otherwise.
+ * Compares two buffers sector by sector. Returns 0 if the first
+ * sector of each buffer matches, non-zero otherwise.
  *
- * pnum is set to the number of sectors (including and immediately following
- * the first one) that are known to have the same comparison result
+ * pnum is set to the sector-aligned size of the buffer prefix that
+ * has the same matching status as the first sector.
  */
-static int compare_sectors(const uint8_t *buf1, const uint8_t *buf2, int n,
-    int *pnum)
+static int compare_buffers(const uint8_t *buf1, const uint8_t *buf2,
+                           int64_t bytes, int64_t *pnum)
 {
     bool res;
-    int i;
+    int64_t i = MIN(bytes, BDRV_SECTOR_SIZE);
 
-    if (n <= 0) {
-        *pnum = 0;
-        return 0;
-    }
+    assert(bytes > 0);
 
-    res = !!memcmp(buf1, buf2, 512);
-    for(i = 1; i < n; i++) {
-        buf1 += 512;
-        buf2 += 512;
+    res = !!memcmp(buf1, buf2, i);
+    while (i < bytes) {
+        int64_t len = MIN(bytes - i, BDRV_SECTOR_SIZE);
 
-        if (!!memcmp(buf1, buf2, 512) != res) {
+        if (!!memcmp(buf1 + i, buf2 + i, len) != res) {
             break;
         }
+        i += len;
     }
 
     *pnum = i;
@@ -1255,7 +1252,7 @@ static int img_compare(int argc, char **argv)
     int64_t total_sectors;
     int64_t sector_num = 0;
     int64_t nb_sectors;
-    int c, pnum;
+    int c;
     uint64_t progress_base;
     bool image_opts = false;
     bool force_share = false;
@@ -1439,6 +1436,8 @@ static int img_compare(int argc, char **argv)
             /* nothing to do */
         } else if (allocated1 == allocated2) {
             if (allocated1) {
+                int64_t pnum;
+
                 nb_sectors = MIN(nb_sectors, IO_BUF_SIZE >> BDRV_SECTOR_BITS);
                 ret = blk_pread(blk1, sector_num << BDRV_SECTOR_BITS, buf1,
                                 nb_sectors << BDRV_SECTOR_BITS);
@@ -1458,11 +1457,11 @@ static int img_compare(int argc, char **argv)
                     ret = 4;
                     goto out;
                 }
-                ret = compare_sectors(buf1, buf2, nb_sectors, &pnum);
-                if (ret || pnum != nb_sectors) {
+                ret = compare_buffers(buf1, buf2,
+                                      nb_sectors * BDRV_SECTOR_SIZE, &pnum);
+                if (ret || pnum != nb_sectors * BDRV_SECTOR_SIZE) {
                     qprintf(quiet, "Content mismatch at offset %" PRId64 "!\n",
-                            sectors_to_bytes(
-                                ret ? sector_num : sector_num + pnum));
+                            sectors_to_bytes(sector_num) + (ret ? 0 : pnum));
                     ret = 1;
                     goto out;
                 }
@@ -3354,16 +3353,16 @@ static int img_rebase(int argc, char **argv)
             /* If they differ, we need to write to the COW file */
             uint64_t written = 0;
 
-            while (written < n) {
-                int pnum;
+            while (written < n * BDRV_SECTOR_SIZE) {
+                int64_t pnum;
 
-                if (compare_sectors(buf_old + written * 512,
-                    buf_new + written * 512, n - written, &pnum))
+                if (compare_buffers(buf_old + written,
+                                    buf_new + written,
+                                    n * BDRV_SECTOR_SIZE - written, &pnum))
                 {
                     ret = blk_pwrite(blk,
-                                     (sector + written) << BDRV_SECTOR_BITS,
-                                     buf_old + written * 512,
-                                     pnum << BDRV_SECTOR_BITS, 0);
+                                     (sector << BDRV_SECTOR_BITS) + written,
+                                     buf_old + written, pnum, 0);
                     if (ret < 0) {
                         error_report("Error while writing to COW image: %s",
                             strerror(-ret));
-- 
2.13.6

  parent reply	other threads:[~2017-10-26 13:18 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-26 13:17 [Qemu-devel] [PULL 00/35] Block layer patches Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 01/35] block: don't add 'driver' to options when referring to backing via node name Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 02/35] qemu-iotests: Test backing_fmt with backing node reference Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 03/35] block: Allow NULL file for bdrv_get_block_status() Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 04/35] block: Add flag to avoid wasted work in bdrv_is_allocated() Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 05/35] block: Make bdrv_round_to_clusters() signature more useful Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 06/35] qcow2: Switch is_zero_sectors() to byte-based Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 07/35] block: Switch bdrv_make_zero() " Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 08/35] qemu-img: Switch get_block_status() " Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 09/35] block: Convert bdrv_get_block_status() to bytes Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 10/35] block: Switch bdrv_co_get_block_status() to byte-based Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 11/35] block: Switch BdrvCoGetBlockStatusData " Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 12/35] block: Switch bdrv_common_block_status_above() " Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 13/35] block: Switch bdrv_co_get_block_status_above() " Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 14/35] block: Convert bdrv_get_block_status_above() to bytes Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 15/35] qemu-img: Simplify logic in img_compare() Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 16/35] qemu-img: Speed up compare on pre-allocated larger file Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 17/35] qemu-img: Add find_nonzero() Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 18/35] qemu-img: Drop redundant error message in compare Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 19/35] qemu-img: Change check_empty_sectors() to byte-based Kevin Wolf
2017-10-26 13:17 ` Kevin Wolf [this message]
2017-10-26 13:17 ` [Qemu-devel] [PULL 21/35] qemu-img: Change img_rebase() to be byte-based Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 22/35] qemu-img: Change img_compare() " Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 23/35] block: Align block status requests Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 24/35] block: Reduce bdrv_aligned_preadv() rounding Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 25/35] qcow2: Reduce is_zero() rounding Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 26/35] qemu-io: Relax 'alloc' now that block-status doesn't assert Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 27/35] qemu-img.1: Image invalidation on qemu-img commit Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 28/35] qcow2: Use BDRV_SECTOR_BITS instead of its literal value Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 29/35] iotests: Add test for dataplane mirroring Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 30/35] iotests: Pull _filter_actual_image_size from 67/87 Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 31/35] iotests: Filter actual image size in 184 and 191 Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 32/35] qcow2: Emit errp when truncating the image tail Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 33/35] qcow2: Fix unaligned preallocated truncation Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 34/35] qcow2: Always execute preallocate() in a coroutine Kevin Wolf
2017-10-26 13:17 ` [Qemu-devel] [PULL 35/35] iotests: Add cluster_size=64k to 125 Kevin Wolf
2017-10-27 10:13 ` [Qemu-devel] [PULL 00/35] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171026131741.5059-21-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.