From mboxrd@z Thu Jan 1 00:00:00 1970 From: Antony Antony Date: Tue, 21 Nov 2017 09:59:42 +0100 Subject: [U-Boot] [PATCH v5 1/2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support In-Reply-To: References: <20170921152217.4011-1-antony@phenome.org> <20171117093954.24122-1-antony@phenome.org> Message-ID: <20171121085942.5uwdw4bihxpfs5rf@AntonyAntony.local> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Nov 21, 2017 at 11:59:42AM +0530, Jagan Teki wrote: > On Fri, Nov 17, 2017 at 3:09 PM, Antony Antony wrote: > > Add initial DT for NanoPi NEO Plus2 by FriendlyARM > > - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU > > - 1 GB DDR3 RAM > > - 8GB eMMC flash (Samsung KLM8G1WEPD-B031) > > - micro SD card slot > > - Gigabit Ethernet (external RTL8211E-VB-CG chip) > > - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module) > > - 2x USB 2.0 host ports > > > > Signed-off-by: Antony Antony > > --- > > Changes v1->v2 > > removed memory {}, compatible ="allwinner,sun5i-a13-mmc" > > remove CONFIG_SPL_SPI_FLASH_SUPPORT=y and CONFIG_SPL_SPI_SUNXI=y (no SPI) > > remove CONFIG_SD_BOOT=y > > Changes v2->v3 > > removed compatible ="allwinner,sun50i-a64-mmc" > > Changes v3->v4 > > removed compatible from mmc0 > > add h5 & a64 compaitable to sun50i-h5.dtsi > > Changes v4->v5 > > update sun50i-h5.dtsi to krenel tree 4.14 > > --- > > arch/arm/dts/Makefile | 1 + > > arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts | 106 ++++++++++++++++++++++++++++ > > configs/nanopi_neo_plus2_defconfig | 18 +++++ > > Update board MAINTAINERS file as well. yes. I will send new version soon. > > +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 > Did you test eMMC boot? yes. I use Armbian and boot from eMMC. thanks, -antony