[PATCH v2 00/18] Entry stack switching

[PATCH v2 00/18] Entry stack switching

[Andy Lutomirski]

This sets up stack switching, including for SYSCALL.  I think it's
in decent shape.

Known issues:
 - I think we're going to want a way to turn the stack switching on and
   off either at boot time or at runtime.  It should be fairly straightforward
   to make it work.

 - I think the ORC unwinder isn't so good at dealing with stack overflows.
   It bails too early (I think), resulting in lots of ? entries.  This
   isn't a regression with this series -- it's just something that could
   be improved.

Ingo, patch 1 may be tip/urgent material.  It fixes what I think is
a bug in Xen.  I'm having a hard time testing because it's being
masked by a bigger unrelated bug that's keeping Xen from booting
when configured to hit the bug I'm fixing.  (The latter bug goes at
least back to v4.13, I think I know roughtly what's wrong, and I've
reported it to the maintainers.)

Changes from v1:
 - Fixed KASAN for real (as far as I can tell).
 - Compiler errors due to my old hackish KASAN fix are gone.
 - Context tracking lockdep errors are fixed (and maybe 

Changes from farther back:
 - This is quite massively changed from last time.
 - 32-bit seems to build and mostly work
 - KASAN is less broken now

Andy Lutomirski (18):
  x86/entry/64: Fix entry_SYSCALL_64_after_hwframe IRQ tracing
  x86/asm/64: Allocate and enable the SYSENTER stack
  x86/dumpstack: Add get_stack_info() support for the SYSENTER stack
  x86/gdt: Put per-cpu GDT remaps in ascending order
  x86/fixmap: Generalize the GDT fixmap mechanism
  x86/kasan/64: Teach KASAN about the cpu_entry_area
  x86/asm: Fix assumptions that the HW TSS is at the beginning of
    cpu_tss
  x86/dumpstack: Handle stack overflow on all stacks
  x86/asm: Move SYSENTER_stack to the beginning of struct tss_struct
  x86/asm: Remap the TSS into the cpu entry area
  x86/asm/64: Separate cpu_current_top_of_stack from TSS.sp0
  x86/espfix/64: Stop assuming that pt_regs is on the entry stack
  x86/asm/64: Use a percpu trampoline stack for IDT entries
  x86/asm/64: Return to userspace from the trampoline stack
  x86/entry/64: Create a percpu SYSCALL entry trampoline
  x86/irq: Remove an old outdated comment about context tracking races
  x86/irq/64: In the stack overflow warning, print the offending IP
  x86/entry/64: Move the IST stacks into cpu_entry_area

 arch/x86/entry/entry_32.S          |   6 +-
 arch/x86/entry/entry_64.S          | 168 +++++++++++++++++++++++++++++++++----
 arch/x86/entry/entry_64_compat.S   |   6 +-
 arch/x86/include/asm/desc.h        |  11 +--
 arch/x86/include/asm/fixmap.h      |  55 +++++++++++-
 arch/x86/include/asm/processor.h   |  46 +++++-----
 arch/x86/include/asm/stacktrace.h  |   3 +
 arch/x86/include/asm/switch_to.h   |   2 +-
 arch/x86/include/asm/thread_info.h |   2 +-
 arch/x86/include/asm/traps.h       |   1 -
 arch/x86/kernel/asm-offsets.c      |   9 ++
 arch/x86/kernel/asm-offsets_32.c   |   5 --
 arch/x86/kernel/asm-offsets_64.c   |   1 +
 arch/x86/kernel/cpu/common.c       | 136 +++++++++++++++++++++++-------
 arch/x86/kernel/doublefault.c      |  36 ++++----
 arch/x86/kernel/dumpstack.c        |  46 +++++++---
 arch/x86/kernel/dumpstack_32.c     |   6 ++
 arch/x86/kernel/dumpstack_64.c     |   6 ++
 arch/x86/kernel/irq.c              |  12 ---
 arch/x86/kernel/irq_64.c           |   4 +-
 arch/x86/kernel/process.c          |  12 ++-
 arch/x86/kernel/process_64.c       |   1 +
 arch/x86/kernel/traps.c            |  23 ++---
 arch/x86/kernel/vmlinux.lds.S      |  10 +++
 arch/x86/mm/kasan_init_64.c        |   9 +-
 arch/x86/power/cpu.c               |  16 ++--
 arch/x86/xen/mmu_pv.c              |   2 +-
 27 files changed, 480 insertions(+), 154 deletions(-)

-- 
2.13.6

[PATCH v2 01/18] x86/entry/64: Fix entry_SYSCALL_64_after_hwframe IRQ tracing

[Andy Lutomirski]

When I added entry_SYSCALL_64_after_hwframe, I left TRACE_IRQS_OFF
before it.  This means that users of entry_SYSCALL_64_after_hwframe
were responsible for invoking TRACE_IRQS_OFF, and the one and only
user (added in the same commit) got it wrong.

I think this would manifest as a warning if a Xen PV guest with
CONFIG_DEBUG_LOCKDEP=y were used with context tracking.  (The
context tracking bit is to cause lockdep to get invoked before we
turn IRQs back on.)  I haven't tested that for real yet because I
can't get a kernel configured like that to boot at all on Xen PV.
I've reported it upstream.  The problem seems to be that Xen PV is
missing early #UD handling, is hitting some WARN, and we rely on

Move TRACE_IRQS_OFF below the label.

Cc: stable@vger.kernel.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Fixes: 8a9949bc71a7 ("x86/xen/64: Rearrange the SYSCALL entries")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/entry/entry_64.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index a2b30ec69497..5063ed1214dd 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -148,8 +148,6 @@ ENTRY(entry_SYSCALL_64)
 	movq	%rsp, PER_CPU_VAR(rsp_scratch)
 	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
 
-	TRACE_IRQS_OFF
-
 	/* Construct struct pt_regs on stack */
 	pushq	$__USER_DS			/* pt_regs->ss */
 	pushq	PER_CPU_VAR(rsp_scratch)	/* pt_regs->sp */
@@ -170,6 +168,8 @@ GLOBAL(entry_SYSCALL_64_after_hwframe)
 	sub	$(6*8), %rsp			/* pt_regs->bp, bx, r12-15 not saved */
 	UNWIND_HINT_REGS extra=0
 
+	TRACE_IRQS_OFF
+
 	/*
 	 * If we need to do entry work or if we guess we'll need to do
 	 * exit work, go straight to the slow path.
-- 
2.13.6

[PATCH v2 02/18] x86/asm/64: Allocate and enable the SYSENTER stack

[Andy Lutomirski]

This will simplify future changes that want scratch variables early in
the SYSENTER handler -- they'll be able to spill registers to the
stack.  It also lets us get rid of a SWAPGS_UNSAFE_STACK user.

This does not depend on CONFIG_IA32_EMULATION because we'll want the
stack space even without IA32 emulation.

As far as I can tell, the reason that this wasn't done from day 1 is
that we use IST for #DB and #BP, which is IMO rather nasty and causes
a lot more problems than it solves.  But, since #DB uses IST, we don't
actually need a real stack for SYSENTER (because SYSENTER with TF set
will invoke #DB on the IST stack rather than the SYSENTER stack).
I want to remove IST usage from these vectors some day, and this patch
is a prerequisite for that as well.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/entry/entry_64_compat.S | 2 +-
 arch/x86/include/asm/processor.h | 3 ---
 arch/x86/kernel/asm-offsets.c    | 5 +++++
 arch/x86/kernel/asm-offsets_32.c | 5 -----
 arch/x86/kernel/cpu/common.c     | 4 +++-
 arch/x86/kernel/process.c        | 2 --
 arch/x86/kernel/traps.c          | 3 +--
 7 files changed, 10 insertions(+), 14 deletions(-)

diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index 568e130d932c..dcc6987f9bae 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -48,7 +48,7 @@
  */
 ENTRY(entry_SYSENTER_compat)
 	/* Interrupts are off on entry. */
-	SWAPGS_UNSAFE_STACK
+	SWAPGS
 	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
 
 	/*
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 2db7cf720b04..789dad5da20f 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -339,14 +339,11 @@ struct tss_struct {
 	 */
 	unsigned long		io_bitmap[IO_BITMAP_LONGS + 1];
 
-#ifdef CONFIG_X86_32
 	/*
 	 * Space for the temporary SYSENTER stack.
 	 */
 	unsigned long		SYSENTER_stack_canary;
 	unsigned long		SYSENTER_stack[64];
-#endif
-
 } ____cacheline_aligned;
 
 DECLARE_PER_CPU_SHARED_ALIGNED(struct tss_struct, cpu_tss);
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index 8ea78275480d..b275863128eb 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -93,4 +93,9 @@ void common(void) {
 
 	BLANK();
 	DEFINE(PTREGS_SIZE, sizeof(struct pt_regs));
+
+	/* Offset from cpu_tss to SYSENTER_stack */
+	OFFSET(CPU_TSS_SYSENTER_stack, tss_struct, SYSENTER_stack);
+	/* Size of SYSENTER_stack */
+	DEFINE(SIZEOF_SYSENTER_stack, sizeof(((struct tss_struct *)0)->SYSENTER_stack));
 }
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index dedf428b20b6..52ce4ea16e53 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -50,11 +50,6 @@ void foo(void)
 	DEFINE(TSS_sysenter_sp0, offsetof(struct tss_struct, x86_tss.sp0) -
 	       offsetofend(struct tss_struct, SYSENTER_stack));
 
-	/* Offset from cpu_tss to SYSENTER_stack */
-	OFFSET(CPU_TSS_SYSENTER_stack, tss_struct, SYSENTER_stack);
-	/* Size of SYSENTER_stack */
-	DEFINE(SIZEOF_SYSENTER_stack, sizeof(((struct tss_struct *)0)->SYSENTER_stack));
-
 #ifdef CONFIG_CC_STACKPROTECTOR
 	BLANK();
 	OFFSET(stack_canary_offset, stack_canary, canary);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 13ae9e5eec2f..1243f732810b 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1384,7 +1384,9 @@ void syscall_init(void)
 	 * AMD doesn't allow SYSENTER in long mode (either 32- or 64-bit).
 	 */
 	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
-	wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
+	wrmsrl_safe(MSR_IA32_SYSENTER_ESP,
+		    (unsigned long)this_cpu_ptr(&cpu_tss) +
+		    offsetofend(struct tss_struct, SYSENTER_stack));
 	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
 #else
 	wrmsrl(MSR_CSTAR, (unsigned long)ignore_sysret);
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 97fb3e5737f5..35d674157fda 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -71,9 +71,7 @@ __visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, cpu_tss) = {
 	  */
 	.io_bitmap		= { [0 ... IO_BITMAP_LONGS] = ~0 },
 #endif
-#ifdef CONFIG_X86_32
 	.SYSENTER_stack_canary	= STACK_END_MAGIC,
-#endif
 };
 EXPORT_PER_CPU_SYMBOL(cpu_tss);
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 989514c94a55..81841f27beff 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -795,14 +795,13 @@ dotraplinkage void do_debug(struct pt_regs *regs, long error_code)
 	debug_stack_usage_dec();
 
 exit:
-#if defined(CONFIG_X86_32)
 	/*
 	 * This is the most likely code path that involves non-trivial use
 	 * of the SYSENTER stack.  Check that we haven't overrun it.
 	 */
 	WARN(this_cpu_read(cpu_tss.SYSENTER_stack_canary) != STACK_END_MAGIC,
 	     "Overran or corrupted SYSENTER stack\n");
-#endif
+
 	ist_exit(regs);
 }
 NOKPROBE_SYMBOL(do_debug);
-- 
2.13.6

[PATCH v2 03/18] x86/dumpstack: Add get_stack_info() support for the SYSENTER stack

[Andy Lutomirski]

get_stack_info() doesn't currently know about the SYSENTER stack, so
unwinding will fail if we entered the kernel on the SYSENTER stack
and haven't fully switched off.  Teach get_stack_info() about the
SYSENTER stack.

With future patches applied that run part of the entry code on the
SYSENTER stack and introduce an intentional BUG(), I would get:

[    3.962218] PANIC: double fault, error_code: 0x0
...
[    3.963998] task: ffff88001aa18000 task.stack: ffff88001aa20000
[    3.964526] RIP: 0010:do_error_trap+0x33/0x1c0
[    3.964947] RSP: 0000:ffffffffff1b8f78 EFLAGS: 00010096
[    3.965439] RAX: dffffc0000000000 RBX: ffffffffff1b8f90 RCX: 0000000000000006
[    3.966067] RDX: ffffffff82048b20 RSI: 0000000000000000 RDI: ffffffffff1b9110
[    3.966696] RBP: ffffffffff1b9088 R08: 0000000000000004 R09: 0000000000000000
[    3.967316] R10: 0000000000000000 R11: fffffbffffe3723f R12: 0000000000000006
[    3.967939] R13: 0000000000000000 R14: 0000000000000004 R15: 0000000000000000
[    3.968565] FS:  0000000000000000(0000) GS:ffff88001ae00000(0000) knlGS:0000000000000000
[    3.969272] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.969776] CR2: ffffffffff1b8f68 CR3: 0000000019308002 CR4: 00000000003606f0
[    3.970406] Call Trace:
[    3.970632] Code: ...

With this patch, I get:

[    4.211553] PANIC: double fault, error_code: 0x0
...
[    4.213536] task: ffff88001aa18000 task.stack: ffff88001aa20000
[    4.214059] RIP: 0010:do_error_trap+0x33/0x1c0
[    4.214449] RSP: 0000:ffffffffff1b8f78 EFLAGS: 00010096
[    4.214934] RAX: dffffc0000000000 RBX: ffffffffff1b8f90 RCX: 0000000000000006
[    4.215554] RDX: ffffffff82048b20 RSI: 0000000000000000 RDI: ffffffffff1b9110
[    4.216176] RBP: ffffffffff1b9088 R08: 0000000000000004 R09: 0000000000000000
[    4.216793] R10: 0000000000000000 R11: fffffbffffe3723f R12: 0000000000000006
[    4.217419] R13: 0000000000000000 R14: 0000000000000004 R15: 0000000000000000
[    4.218046] FS:  0000000000000000(0000) GS:ffff88001ae00000(0000) knlGS:0000000000000000
[    4.218775] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    4.219280] CR2: ffffffffff1b8f68 CR3: 00000000193da002 CR4: 00000000003606f0
[    4.219931] Call Trace:
[    4.220156]  <SYSENTER>
[    4.220383]  ? async_page_fault+0x36/0x60
[    4.220768]  ? invalid_op+0x22/0x40
[    4.221087]  ? async_page_fault+0x36/0x60
[    4.221442]  ? sync_regs+0x3c/0x40
[    4.221745]  ? sync_regs+0x2e/0x40
[    4.222051]  ? error_entry+0x6c/0xd0
[    4.222395]  ? async_page_fault+0x36/0x60
[    4.222748]  </SYSENTER>
[    4.223014] Code: ...

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/include/asm/stacktrace.h |  3 +++
 arch/x86/kernel/dumpstack.c       | 19 +++++++++++++++++++
 arch/x86/kernel/dumpstack_32.c    |  6 ++++++
 arch/x86/kernel/dumpstack_64.c    |  6 ++++++
 4 files changed, 34 insertions(+)

diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index 8da111b3c342..f8062bfd43a0 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -16,6 +16,7 @@ enum stack_type {
 	STACK_TYPE_TASK,
 	STACK_TYPE_IRQ,
 	STACK_TYPE_SOFTIRQ,
+	STACK_TYPE_SYSENTER,
 	STACK_TYPE_EXCEPTION,
 	STACK_TYPE_EXCEPTION_LAST = STACK_TYPE_EXCEPTION + N_EXCEPTION_STACKS-1,
 };
@@ -28,6 +29,8 @@ struct stack_info {
 bool in_task_stack(unsigned long *stack, struct task_struct *task,
 		   struct stack_info *info);
 
+bool in_sysenter_stack(unsigned long *stack, struct stack_info *info);
+
 int get_stack_info(unsigned long *stack, struct task_struct *task,
 		   struct stack_info *info, unsigned long *visit_mask);
 
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index f13b4c00a5de..5e7d10e8ca25 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -43,6 +43,25 @@ bool in_task_stack(unsigned long *stack, struct task_struct *task,
 	return true;
 }
 
+bool in_sysenter_stack(unsigned long *stack, struct stack_info *info)
+{
+	struct tss_struct *tss = this_cpu_ptr(&cpu_tss);
+
+	/* Treat the canary as part of the stack for unwinding purposes. */
+	void *begin = &tss->SYSENTER_stack_canary;
+	void *end = (void *)&tss->SYSENTER_stack + sizeof(tss->SYSENTER_stack);
+
+	if ((void *)stack < begin || (void *)stack >= end)
+		return false;
+
+	info->type	= STACK_TYPE_SYSENTER;
+	info->begin	= begin;
+	info->end	= end;
+	info->next_sp	= NULL;
+
+	return true;
+}
+
 static void printk_stack_address(unsigned long address, int reliable,
 				 char *log_lvl)
 {
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index daefae83a3aa..5ff13a6b3680 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -26,6 +26,9 @@ const char *stack_type_name(enum stack_type type)
 	if (type == STACK_TYPE_SOFTIRQ)
 		return "SOFTIRQ";
 
+	if (type == STACK_TYPE_SYSENTER)
+		return "SYSENTER";
+
 	return NULL;
 }
 
@@ -93,6 +96,9 @@ int get_stack_info(unsigned long *stack, struct task_struct *task,
 	if (task != current)
 		goto unknown;
 
+	if (in_sysenter_stack(stack, info))
+		goto recursion_check;
+
 	if (in_hardirq_stack(stack, info))
 		goto recursion_check;
 
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 88ce2ffdb110..abc828f8c297 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -37,6 +37,9 @@ const char *stack_type_name(enum stack_type type)
 	if (type == STACK_TYPE_IRQ)
 		return "IRQ";
 
+	if (type == STACK_TYPE_SYSENTER)
+		return "SYSENTER";
+
 	if (type >= STACK_TYPE_EXCEPTION && type <= STACK_TYPE_EXCEPTION_LAST)
 		return exception_stack_names[type - STACK_TYPE_EXCEPTION];
 
@@ -115,6 +118,9 @@ int get_stack_info(unsigned long *stack, struct task_struct *task,
 	if (in_irq_stack(stack, info))
 		goto recursion_check;
 
+	if (in_sysenter_stack(stack, info))
+		goto recursion_check;
+
 	goto unknown;
 
 recursion_check:
-- 
2.13.6

[PATCH v2 04/18] x86/gdt: Put per-cpu GDT remaps in ascending order

[Andy Lutomirski]

We currently have CPU 0's GDT at the top of the GDT range and
higher-numbered CPUs at lower addreses.  This happens because the
fixmap is upside down (index 0 is the top of the fixmap).

Flip it so that GDTs are in ascending order by virtual address.
This will simplify a future patch that will generalize the GDT
remap to contain multiple pages.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/include/asm/desc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index 4011cb03ef08..95cd95eb7285 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -63,7 +63,7 @@ static inline struct desc_struct *get_current_gdt_rw(void)
 /* Get the fixmap index for a specific processor */
 static inline unsigned int get_cpu_gdt_ro_index(int cpu)
 {
-	return FIX_GDT_REMAP_BEGIN + cpu;
+	return FIX_GDT_REMAP_END - cpu;
 }
 
 /* Provide the fixmap address of the remapped GDT */
-- 
2.13.6

[PATCH v2 05/18] x86/fixmap: Generalize the GDT fixmap mechanism

[Andy Lutomirski]

Currently, the GDT is an ad-hoc array of pages, one per CPU, in the
fixmap.  Generalize it to be an array of a new struct cpu_entry_area
so that we can cleanly add new things to it.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/include/asm/desc.h   |  9 +--------
 arch/x86/include/asm/fixmap.h | 36 ++++++++++++++++++++++++++++++++++--
 arch/x86/kernel/cpu/common.c  | 14 +++++++-------
 arch/x86/xen/mmu_pv.c         |  2 +-
 4 files changed, 43 insertions(+), 18 deletions(-)

diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index 95cd95eb7285..194ffab00ebe 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -60,17 +60,10 @@ static inline struct desc_struct *get_current_gdt_rw(void)
 	return this_cpu_ptr(&gdt_page)->gdt;
 }
 
-/* Get the fixmap index for a specific processor */
-static inline unsigned int get_cpu_gdt_ro_index(int cpu)
-{
-	return FIX_GDT_REMAP_END - cpu;
-}
-
 /* Provide the fixmap address of the remapped GDT */
 static inline struct desc_struct *get_cpu_gdt_ro(int cpu)
 {
-	unsigned int idx = get_cpu_gdt_ro_index(cpu);
-	return (struct desc_struct *)__fix_to_virt(idx);
+	return (struct desc_struct *)&get_cpu_entry_area(cpu)->gdt;
 }
 
 /* Provide the current read-only GDT */
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index b0c505fe9a95..038b8474c7f8 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -44,6 +44,17 @@ extern unsigned long __FIXADDR_TOP;
 			 PAGE_SIZE)
 #endif
 
+/*
+ * cpu_entry_area is a percpu region in the fixmap that contains things
+ * needed by the CPU and early entry/exit code.  Real types aren't used
+ * for all fields here to about circular header dependencies.
+ */
+struct cpu_entry_area
+{
+	char gdt[PAGE_SIZE];
+};
+
+#define CPU_ENTRY_AREA_PAGES (sizeof(struct cpu_entry_area) / PAGE_SIZE)
 
 /*
  * Here we define all the compile-time 'special' virtual
@@ -101,8 +112,8 @@ enum fixed_addresses {
 	FIX_LNW_VRTC,
 #endif
 	/* Fixmap entries to remap the GDTs, one per processor. */
-	FIX_GDT_REMAP_BEGIN,
-	FIX_GDT_REMAP_END = FIX_GDT_REMAP_BEGIN + NR_CPUS - 1,
+	FIX_CPU_ENTRY_AREA_TOP,
+	FIX_CPU_ENTRY_AREA_BOTTOM = FIX_CPU_ENTRY_AREA_TOP + (CPU_ENTRY_AREA_PAGES * NR_CPUS) - 1,
 
 #ifdef CONFIG_ACPI_APEI_GHES
 	/* Used for GHES mapping from assorted contexts */
@@ -191,5 +202,26 @@ void __init *early_memremap_decrypted_wp(resource_size_t phys_addr,
 void __early_set_fixmap(enum fixed_addresses idx,
 			phys_addr_t phys, pgprot_t flags);
 
+static inline unsigned int __get_cpu_entry_area_page_index(int cpu, int page)
+{
+	BUILD_BUG_ON(sizeof(struct cpu_entry_area) % PAGE_SIZE != 0);
+
+	return FIX_CPU_ENTRY_AREA_BOTTOM - cpu*CPU_ENTRY_AREA_PAGES - page;
+}
+
+#define __get_cpu_entry_area_offset_index(cpu, offset) ({		\
+	BUILD_BUG_ON(offset % PAGE_SIZE != 0);				\
+	__get_cpu_entry_area_page_index(cpu, offset / PAGE_SIZE);	\
+	})
+
+#define get_cpu_entry_area_index(cpu, field)				\
+	__get_cpu_entry_area_offset_index((cpu), offsetof(struct cpu_entry_area, field))
+
+static inline struct cpu_entry_area *get_cpu_entry_area(int cpu)
+{
+	return (struct cpu_entry_area *)
+		__fix_to_virt(__get_cpu_entry_area_page_index(cpu, 0));
+}
+
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASM_X86_FIXMAP_H */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 1243f732810b..1e0843d15e64 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -488,12 +488,12 @@ void load_percpu_segment(int cpu)
 	load_stack_canary_segment();
 }
 
-/* Setup the fixmap mapping only once per-processor */
-static inline void setup_fixmap_gdt(int cpu)
+/* Setup the fixmap mappings only once per-processor */
+static inline void setup_cpu_entry_area(int cpu)
 {
 #ifdef CONFIG_X86_64
 	/* On 64-bit systems, we use a read-only fixmap GDT. */
-	pgprot_t prot = PAGE_KERNEL_RO;
+	pgprot_t gdt_prot = PAGE_KERNEL_RO;
 #else
 	/*
 	 * On native 32-bit systems, the GDT cannot be read-only because
@@ -504,11 +504,11 @@ static inline void setup_fixmap_gdt(int cpu)
 	 * On Xen PV, the GDT must be read-only because the hypervisor requires
 	 * it.
 	 */
-	pgprot_t prot = boot_cpu_has(X86_FEATURE_XENPV) ?
+	pgprot_t gdt_prot = boot_cpu_has(X86_FEATURE_XENPV) ?
 		PAGE_KERNEL_RO : PAGE_KERNEL;
 #endif
 
-	__set_fixmap(get_cpu_gdt_ro_index(cpu), get_cpu_gdt_paddr(cpu), prot);
+	__set_fixmap(get_cpu_entry_area_index(cpu, gdt), get_cpu_gdt_paddr(cpu), gdt_prot);
 }
 
 /* Load the original GDT from the per-cpu structure */
@@ -1612,7 +1612,7 @@ void cpu_init(void)
 	if (is_uv_system())
 		uv_cpu_init();
 
-	setup_fixmap_gdt(cpu);
+	setup_cpu_entry_area(cpu);
 	load_fixmap_gdt(cpu);
 }
 
@@ -1674,7 +1674,7 @@ void cpu_init(void)
 
 	fpu__init_cpu();
 
-	setup_fixmap_gdt(cpu);
+	setup_cpu_entry_area(cpu);
 	load_fixmap_gdt(cpu);
 }
 #endif
diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c
index fc048ec686e7..6cf801ca1142 100644
--- a/arch/x86/xen/mmu_pv.c
+++ b/arch/x86/xen/mmu_pv.c
@@ -2272,7 +2272,7 @@ static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot)
 #endif
 	case FIX_TEXT_POKE0:
 	case FIX_TEXT_POKE1:
-	case FIX_GDT_REMAP_BEGIN ... FIX_GDT_REMAP_END:
+	case FIX_CPU_ENTRY_AREA_TOP ... FIX_CPU_ENTRY_AREA_BOTTOM:
 		/* All local page mappings */
 		pte = pfn_pte(phys, prot);
 		break;
-- 
2.13.6

[PATCH v2 06/18] x86/kasan/64: Teach KASAN about the cpu_entry_area

[Andy Lutomirski]

The cpu_entry_area will contain stacks.  Make sure that KASAN has
appropriate shadow mappings for them.

Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/mm/kasan_init_64.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
index 99dfed6dfef8..43d376687315 100644
--- a/arch/x86/mm/kasan_init_64.c
+++ b/arch/x86/mm/kasan_init_64.c
@@ -330,7 +330,14 @@ void __init kasan_init(void)
 			      early_pfn_to_nid(__pa(_stext)));
 
 	kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)MODULES_END),
-			(void *)KASAN_SHADOW_END);
+				   kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM))));
+
+	kasan_populate_shadow((unsigned long)kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM))),
+			      (unsigned long)kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_TOP) + PAGE_SIZE)),
+		0);
+
+	kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_TOP) + PAGE_SIZE)),
+				   (void *)KASAN_SHADOW_END);
 
 	load_cr3(init_top_pgt);
 	__flush_tlb_all();
-- 
2.13.6

[PATCH v2 07/18] x86/asm: Fix assumptions that the HW TSS is at the beginning of cpu_tss

[Andy Lutomirski]

I'm going to move SYSENTER_stack to the beginning of cpu_tss to help
detect overflow.  Before this can happen, I need to fix several code
paths that hardcode assumptions about the old layout.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/include/asm/desc.h      |  2 +-
 arch/x86/include/asm/processor.h |  4 ++--
 arch/x86/kernel/cpu/common.c     |  8 ++++----
 arch/x86/kernel/doublefault.c    | 36 +++++++++++++++++-------------------
 arch/x86/power/cpu.c             | 13 +++++++------
 5 files changed, 31 insertions(+), 32 deletions(-)

diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index 194ffab00ebe..aab4fe9f49f8 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -178,7 +178,7 @@ static inline void set_tssldt_descriptor(void *d, unsigned long addr,
 #endif
 }
 
-static inline void __set_tss_desc(unsigned cpu, unsigned int entry, void *addr)
+static inline void __set_tss_desc(unsigned cpu, unsigned int entry, struct x86_hw_tss *addr)
 {
 	struct desc_struct *d = get_cpu_gdt_rw(cpu);
 	tss_desc tss;
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 789dad5da20f..d32a3c88a968 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -162,7 +162,7 @@ enum cpuid_regs_idx {
 extern struct cpuinfo_x86	boot_cpu_data;
 extern struct cpuinfo_x86	new_cpu_data;
 
-extern struct tss_struct	doublefault_tss;
+extern struct x86_hw_tss	doublefault_tss;
 extern __u32			cpu_caps_cleared[NCAPINTS];
 extern __u32			cpu_caps_set[NCAPINTS];
 
@@ -322,7 +322,7 @@ struct x86_hw_tss {
 #define IO_BITMAP_BITS			65536
 #define IO_BITMAP_BYTES			(IO_BITMAP_BITS/8)
 #define IO_BITMAP_LONGS			(IO_BITMAP_BYTES/sizeof(long))
-#define IO_BITMAP_OFFSET		offsetof(struct tss_struct, io_bitmap)
+#define IO_BITMAP_OFFSET		(offsetof(struct tss_struct, io_bitmap) - offsetof(struct tss_struct, x86_tss))
 #define INVALID_IO_BITMAP_OFFSET	0x8000
 
 struct tss_struct {
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 1e0843d15e64..099fca92f6be 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1580,7 +1580,7 @@ void cpu_init(void)
 		}
 	}
 
-	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+	t->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
 
 	/*
 	 * <= is required because the CPU will access up to
@@ -1599,7 +1599,7 @@ void cpu_init(void)
 	 * Initialize the TSS.  Don't bother initializing sp0, as the initial
 	 * task never enters user mode.
 	 */
-	set_tss_desc(cpu, t);
+	set_tss_desc(cpu, &t->x86_tss);
 	load_TR_desc();
 
 	load_mm_ldt(&init_mm);
@@ -1657,12 +1657,12 @@ void cpu_init(void)
 	 * Initialize the TSS.  Don't bother initializing sp0, as the initial
 	 * task never enters user mode.
 	 */
-	set_tss_desc(cpu, t);
+	set_tss_desc(cpu, &t->x86_tss);
 	load_TR_desc();
 
 	load_mm_ldt(&init_mm);
 
-	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+	t->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
 
 #ifdef CONFIG_DOUBLEFAULT
 	/* Set up doublefault TSS pointer in the GDT */
diff --git a/arch/x86/kernel/doublefault.c b/arch/x86/kernel/doublefault.c
index 0e662c55ae90..0b8cedb20d6d 100644
--- a/arch/x86/kernel/doublefault.c
+++ b/arch/x86/kernel/doublefault.c
@@ -50,25 +50,23 @@ static void doublefault_fn(void)
 		cpu_relax();
 }
 
-struct tss_struct doublefault_tss __cacheline_aligned = {
-	.x86_tss = {
-		.sp0		= STACK_START,
-		.ss0		= __KERNEL_DS,
-		.ldt		= 0,
-		.io_bitmap_base	= INVALID_IO_BITMAP_OFFSET,
-
-		.ip		= (unsigned long) doublefault_fn,
-		/* 0x2 bit is always set */
-		.flags		= X86_EFLAGS_SF | 0x2,
-		.sp		= STACK_START,
-		.es		= __USER_DS,
-		.cs		= __KERNEL_CS,
-		.ss		= __KERNEL_DS,
-		.ds		= __USER_DS,
-		.fs		= __KERNEL_PERCPU,
-
-		.__cr3		= __pa_nodebug(swapper_pg_dir),
-	}
+struct x86_hw_tss doublefault_tss __cacheline_aligned = {
+	.sp0		= STACK_START,
+	.ss0		= __KERNEL_DS,
+	.ldt		= 0,
+	.io_bitmap_base	= INVALID_IO_BITMAP_OFFSET,
+
+	.ip		= (unsigned long) doublefault_fn,
+	/* 0x2 bit is always set */
+	.flags		= X86_EFLAGS_SF | 0x2,
+	.sp		= STACK_START,
+	.es		= __USER_DS,
+	.cs		= __KERNEL_CS,
+	.ss		= __KERNEL_DS,
+	.ds		= __USER_DS,
+	.fs		= __KERNEL_PERCPU,
+
+	.__cr3		= __pa_nodebug(swapper_pg_dir),
 };
 
 /* dummy for do_double_fault() call */
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 84fcfde53f8f..50593e138281 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -165,12 +165,13 @@ static void fix_processor_context(void)
 	struct desc_struct *desc = get_cpu_gdt_rw(cpu);
 	tss_desc tss;
 #endif
-	set_tss_desc(cpu, t);	/*
-				 * This just modifies memory; should not be
-				 * necessary. But... This is necessary, because
-				 * 386 hardware has concept of busy TSS or some
-				 * similar stupidity.
-				 */
+
+	/*
+	 * This just modifies memory; should not be necessary. But... This is
+	 * necessary, because 386 hardware has concept of busy TSS or some
+	 * similar stupidity.
+	 */
+	set_tss_desc(cpu, &t->x86_tss);
 
 #ifdef CONFIG_X86_64
 	memcpy(&tss, &desc[GDT_ENTRY_TSS], sizeof(tss_desc));
-- 
2.13.6

[PATCH v2 08/18] x86/dumpstack: Handle stack overflow on all stacks

[Andy Lutomirski]

We currently special-case stack overflow on the task stack.  We're
going to start putting special stacks in the fixmap with a custom
layout, so they'll have guard pages, too.  Teach the unwinder to be
able to unwind an overflow of any of the stacks.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/kernel/dumpstack.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 5e7d10e8ca25..635dcbfe2398 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -90,24 +90,30 @@ void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
 	 * - task stack
 	 * - interrupt stack
 	 * - HW exception stacks (double fault, nmi, debug, mce)
+	 * - SYSENTER stack
 	 *
-	 * x86-32 can have up to three stacks:
+	 * x86-32 can have up to four stacks:
 	 * - task stack
 	 * - softirq stack
 	 * - hardirq stack
+	 * - SYSENTER stack
 	 */
 	for (regs = NULL; stack; stack = PTR_ALIGN(stack_info.next_sp, sizeof(long))) {
 		const char *stack_name;
 
-		/*
-		 * If we overflowed the task stack into a guard page, jump back
-		 * to the bottom of the usable stack.
-		 */
-		if (task_stack_page(task) - (void *)stack < PAGE_SIZE)
-			stack = task_stack_page(task);
-
-		if (get_stack_info(stack, task, &stack_info, &visit_mask))
-			break;
+		if (get_stack_info(stack, task, &stack_info, &visit_mask)) {
+			/*
+			 * We weren't on a valid stack.  It's possible that
+			 * we overflowed a valid stack into a guard page.
+			 * See if the next page up is valid to that we can
+			 * generate some kind of backtrace if this happens.
+			 */
+			stack = (unsigned long *)
+				PAGE_ALIGN((unsigned long)stack);
+			if (get_stack_info(stack, task, &stack_info,
+					   &visit_mask))
+				break;
+		}
 
 		stack_name = stack_type_name(stack_info.type);
 		if (stack_name)
-- 
2.13.6

[PATCH v2 09/18] x86/asm: Move SYSENTER_stack to the beginning of struct tss_struct

[Andy Lutomirski]

I want SYSENTER_stack to have reliable overflow detection, which
means that it needs to be at the bottom of a page, not the top.
Move it to the beginning of struct tss_struct and page-align it.

Also add an assertion to make sure that the fixed hardware TSS
doesn't cross a page boundary.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/include/asm/processor.h | 21 ++++++++++++---------
 arch/x86/kernel/cpu/common.c     | 22 ++++++++++++++++++++++
 2 files changed, 34 insertions(+), 9 deletions(-)

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index d32a3c88a968..8f5dac9dfbdc 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -327,7 +327,16 @@ struct x86_hw_tss {
 
 struct tss_struct {
 	/*
-	 * The hardware state:
+	 * Space for the temporary SYSENTER stack, used for SYSENTER
+	 * and the entry trampoline as well.
+	 */
+	unsigned long		SYSENTER_stack_canary;
+	unsigned long		SYSENTER_stack[64];
+
+	/*
+	 * The fixed hardware portion.  This must not cross a page boundary
+	 * at risk of violating the SDM's advice and potentially triggering
+	 * errata.
 	 */
 	struct x86_hw_tss	x86_tss;
 
@@ -338,15 +347,9 @@ struct tss_struct {
 	 * be within the limit.
 	 */
 	unsigned long		io_bitmap[IO_BITMAP_LONGS + 1];
+} __attribute__((__aligned__(PAGE_SIZE)));
 
-	/*
-	 * Space for the temporary SYSENTER stack.
-	 */
-	unsigned long		SYSENTER_stack_canary;
-	unsigned long		SYSENTER_stack[64];
-} ____cacheline_aligned;
-
-DECLARE_PER_CPU_SHARED_ALIGNED(struct tss_struct, cpu_tss);
+DECLARE_PER_CPU_PAGE_ALIGNED(struct tss_struct, cpu_tss);
 
 /*
  * sizeof(unsigned long) coming from an extra "long" at the end
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 099fca92f6be..1868fe693fe1 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -509,6 +509,28 @@ static inline void setup_cpu_entry_area(int cpu)
 #endif
 
 	__set_fixmap(get_cpu_entry_area_index(cpu, gdt), get_cpu_gdt_paddr(cpu), gdt_prot);
+
+	/*
+	 *
+	 * The Intel SDM says (Volume 3, 7.2.1):
+	 *
+	 *  Avoid placing a page boundary in the part of the TSS that the
+	 *  processor reads during a task switch (the first 104 bytes). The
+	 *  processor may not correctly perform address translations if a
+	 *  boundary occurs in this area. During a task switch, the processor
+	 *  reads and writes into the first 104 bytes of each TSS (using
+	 *  contiguous physical addresses beginning with the physical address
+	 *  of the first byte of the TSS). So, after TSS access begins, if
+	 *  part of the 104 bytes is not physically contiguous, the processor
+	 *  will access incorrect information without generating a page-fault
+	 *  exception.
+	 *
+	 * There are also a lot of errata involving the TSS spanning a page
+	 * boundary.  Assert that we're not doing that.
+	 */
+	BUILD_BUG_ON((offsetof(struct tss_struct, x86_tss) ^
+		      offsetofend(struct tss_struct, x86_tss)) & PAGE_MASK);
+
 }
 
 /* Load the original GDT from the per-cpu structure */
-- 
2.13.6

[PATCH v2 10/18] x86/asm: Remap the TSS into the cpu entry area

[Andy Lutomirski]

This has a secondary purpose: it puts the entry stack into a region
with a well-controlled layout.  A subsequent patch will take
advantage of this to streamline the SYSCALL entry code to be able to
find it more easily.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/entry/entry_32.S     |  6 ++++--
 arch/x86/include/asm/fixmap.h |  7 +++++++
 arch/x86/kernel/asm-offsets.c |  3 +++
 arch/x86/kernel/cpu/common.c  | 40 ++++++++++++++++++++++++++++++++++------
 arch/x86/kernel/dumpstack.c   |  3 ++-
 arch/x86/power/cpu.c          | 11 ++++++-----
 6 files changed, 56 insertions(+), 14 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 4838037f97f6..0ab316c46806 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -941,7 +941,8 @@ ENTRY(debug)
 	movl	%esp, %eax			# pt_regs pointer
 
 	/* Are we currently on the SYSENTER stack? */
-	PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
+	movl	PER_CPU_VAR(cpu_entry_area), %ecx
+	addl	$CPU_ENTRY_AREA_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx
 	subl	%eax, %ecx	/* ecx = (end of SYSENTER_stack) - esp */
 	cmpl	$SIZEOF_SYSENTER_stack, %ecx
 	jb	.Ldebug_from_sysenter_stack
@@ -984,7 +985,8 @@ ENTRY(nmi)
 	movl	%esp, %eax			# pt_regs pointer
 
 	/* Are we currently on the SYSENTER stack? */
-	PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
+	movl	PER_CPU_VAR(cpu_entry_area), %ecx
+	addl	$CPU_ENTRY_AREA_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx
 	subl	%eax, %ecx	/* ecx = (end of SYSENTER_stack) - esp */
 	cmpl	$SIZEOF_SYSENTER_stack, %ecx
 	jb	.Lnmi_from_sysenter_stack
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 038b8474c7f8..ccf34181d925 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -52,6 +52,13 @@ extern unsigned long __FIXADDR_TOP;
 struct cpu_entry_area
 {
 	char gdt[PAGE_SIZE];
+
+	/*
+	 * The gdt is just below cpu_tss and thus serves (on x86_64) as a
+	 * a read-only guard page for the SYSENTER stack at the bottom
+	 * of the TSS region.
+	 */
+	struct tss_struct tss;
 };
 
 #define CPU_ENTRY_AREA_PAGES (sizeof(struct cpu_entry_area) / PAGE_SIZE)
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index b275863128eb..55858b277cf6 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -98,4 +98,7 @@ void common(void) {
 	OFFSET(CPU_TSS_SYSENTER_stack, tss_struct, SYSENTER_stack);
 	/* Size of SYSENTER_stack */
 	DEFINE(SIZEOF_SYSENTER_stack, sizeof(((struct tss_struct *)0)->SYSENTER_stack));
+
+	/* Layout info for cpu_entry_area */
+	OFFSET(CPU_ENTRY_AREA_tss, cpu_entry_area, tss);
 }
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 1868fe693fe1..d551bb4339ec 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -488,6 +488,21 @@ void load_percpu_segment(int cpu)
 	load_stack_canary_segment();
 }
 
+static void set_percpu_fixmap_pages(int fixmap_index, void *ptr, int pages,
+				    pgprot_t prot)
+{
+	int i;
+
+	for (i = 0; i < pages; i++)
+		__set_fixmap(fixmap_index - i,
+			     per_cpu_ptr_to_phys(ptr + i*PAGE_SIZE), prot);
+}
+
+#ifdef CONFIG_X86_32
+/* The 32-bit entry code needs to find cpu_entry_area. */
+DEFINE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
+#endif
+
 /* Setup the fixmap mappings only once per-processor */
 static inline void setup_cpu_entry_area(int cpu)
 {
@@ -530,7 +545,15 @@ static inline void setup_cpu_entry_area(int cpu)
 	 */
 	BUILD_BUG_ON((offsetof(struct tss_struct, x86_tss) ^
 		      offsetofend(struct tss_struct, x86_tss)) & PAGE_MASK);
+	BUILD_BUG_ON(sizeof(struct tss_struct) % PAGE_SIZE != 0);
+	set_percpu_fixmap_pages(get_cpu_entry_area_index(cpu, tss),
+				&per_cpu(cpu_tss, cpu),
+				sizeof(struct tss_struct) / PAGE_SIZE,
+				PAGE_KERNEL);
 
+#ifdef CONFIG_X86_32
+	this_cpu_write(cpu_entry_area, get_cpu_entry_area(cpu));
+#endif
 }
 
 /* Load the original GDT from the per-cpu structure */
@@ -1281,7 +1304,8 @@ void enable_sep_cpu(void)
 	wrmsr(MSR_IA32_SYSENTER_CS, tss->x86_tss.ss1, 0);
 
 	wrmsr(MSR_IA32_SYSENTER_ESP,
-	      (unsigned long)tss + offsetofend(struct tss_struct, SYSENTER_stack),
+	      (unsigned long)&get_cpu_entry_area(cpu)->tss +
+	      offsetofend(struct tss_struct, SYSENTER_stack),
 	      0);
 
 	wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)entry_SYSENTER_32, 0);
@@ -1394,6 +1418,8 @@ static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
 /* May not be marked __init: used by software suspend */
 void syscall_init(void)
 {
+	int cpu = smp_processor_id();
+
 	wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
 	wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
 
@@ -1407,7 +1433,7 @@ void syscall_init(void)
 	 */
 	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
 	wrmsrl_safe(MSR_IA32_SYSENTER_ESP,
-		    (unsigned long)this_cpu_ptr(&cpu_tss) +
+		    (unsigned long)&get_cpu_entry_area(cpu)->tss +
 		    offsetofend(struct tss_struct, SYSENTER_stack));
 	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
 #else
@@ -1617,11 +1643,13 @@ void cpu_init(void)
 	initialize_tlbstate_and_flush();
 	enter_lazy_tlb(&init_mm, me);
 
+	setup_cpu_entry_area(cpu);
+
 	/*
 	 * Initialize the TSS.  Don't bother initializing sp0, as the initial
 	 * task never enters user mode.
 	 */
-	set_tss_desc(cpu, &t->x86_tss);
+	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
 	load_TR_desc();
 
 	load_mm_ldt(&init_mm);
@@ -1634,7 +1662,6 @@ void cpu_init(void)
 	if (is_uv_system())
 		uv_cpu_init();
 
-	setup_cpu_entry_area(cpu);
 	load_fixmap_gdt(cpu);
 }
 
@@ -1675,11 +1702,13 @@ void cpu_init(void)
 	initialize_tlbstate_and_flush();
 	enter_lazy_tlb(&init_mm, curr);
 
+	setup_cpu_entry_area(cpu);
+
 	/*
 	 * Initialize the TSS.  Don't bother initializing sp0, as the initial
 	 * task never enters user mode.
 	 */
-	set_tss_desc(cpu, &t->x86_tss);
+	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
 	load_TR_desc();
 
 	load_mm_ldt(&init_mm);
@@ -1696,7 +1725,6 @@ void cpu_init(void)
 
 	fpu__init_cpu();
 
-	setup_cpu_entry_area(cpu);
 	load_fixmap_gdt(cpu);
 }
 #endif
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 635dcbfe2398..def64a91bd68 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -45,7 +45,8 @@ bool in_task_stack(unsigned long *stack, struct task_struct *task,
 
 bool in_sysenter_stack(unsigned long *stack, struct stack_info *info)
 {
-	struct tss_struct *tss = this_cpu_ptr(&cpu_tss);
+	int cpu = smp_processor_id();
+	struct tss_struct *tss = &get_cpu_entry_area(cpu)->tss;
 
 	/* Treat the canary as part of the stack for unwinding purposes. */
 	void *begin = &tss->SYSENTER_stack_canary;
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 50593e138281..04d5157fe7f8 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -160,18 +160,19 @@ static void do_fpu_end(void)
 static void fix_processor_context(void)
 {
 	int cpu = smp_processor_id();
-	struct tss_struct *t = &per_cpu(cpu_tss, cpu);
 #ifdef CONFIG_X86_64
 	struct desc_struct *desc = get_cpu_gdt_rw(cpu);
 	tss_desc tss;
 #endif
 
 	/*
-	 * This just modifies memory; should not be necessary. But... This is
-	 * necessary, because 386 hardware has concept of busy TSS or some
-	 * similar stupidity.
+	 * We need to reload TR, which requires that we change the
+	 * GDT entry to indicate "available" first.
+	 *
+	 * XXX: This could probably all be replaced by a call to
+	 * force_reload_TR().
 	 */
-	set_tss_desc(cpu, &t->x86_tss);
+	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
 
 #ifdef CONFIG_X86_64
 	memcpy(&tss, &desc[GDT_ENTRY_TSS], sizeof(tss_desc));
-- 
2.13.6

[PATCH v2 11/18] x86/asm/64: Separate cpu_current_top_of_stack from TSS.sp0

[Andy Lutomirski]

On 64-bit kernels, we used to assume that TSS.sp0 was the current
top of stack.  With the addition of an entry trampoline, this will
no longer be the case.  Store the current top of stack in TSS.sp1,
which is otherwise unused but shares the same cacheline.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/include/asm/processor.h   | 18 +++++++++++++-----
 arch/x86/include/asm/thread_info.h |  2 +-
 arch/x86/kernel/asm-offsets_64.c   |  1 +
 arch/x86/kernel/process.c          | 10 ++++++++++
 arch/x86/kernel/process_64.c       |  1 +
 5 files changed, 26 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 8f5dac9dfbdc..45c2bde8a1df 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -304,7 +304,13 @@ struct x86_hw_tss {
 struct x86_hw_tss {
 	u32			reserved1;
 	u64			sp0;
+
+	/*
+	 * We store cpu_current_top_of_stack in sp1 so it's always accessible.
+	 * Linux does not use ring 1, so sp1 is not otherwise needed.
+	 */
 	u64			sp1;
+
 	u64			sp2;
 	u64			reserved2;
 	u64			ist[7];
@@ -363,6 +369,8 @@ DECLARE_PER_CPU_PAGE_ALIGNED(struct tss_struct, cpu_tss);
 
 #ifdef CONFIG_X86_32
 DECLARE_PER_CPU(unsigned long, cpu_current_top_of_stack);
+#else
+#define cpu_current_top_of_stack cpu_tss.x86_tss.sp1
 #endif
 
 /*
@@ -534,12 +542,12 @@ static inline void native_swapgs(void)
 
 static inline unsigned long current_top_of_stack(void)
 {
-#ifdef CONFIG_X86_64
-	return this_cpu_read_stable(cpu_tss.x86_tss.sp0);
-#else
-	/* sp0 on x86_32 is special in and around vm86 mode. */
+	/*
+	 *  We can't read directly from tss.sp0: sp0 on x86_32 is special in
+	 *  and around vm86 mode and sp0 on x86_64 is special because of the
+	 *  entry trampoline.
+	 */
 	return this_cpu_read_stable(cpu_current_top_of_stack);
-#endif
 }
 
 static inline bool on_thread_stack(void)
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 70f425947dc5..44a04999791e 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -207,7 +207,7 @@ static inline int arch_within_stack_frames(const void * const stack,
 #else /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_X86_64
-# define cpu_current_top_of_stack (cpu_tss + TSS_sp0)
+# define cpu_current_top_of_stack (cpu_tss + TSS_sp1)
 #endif
 
 #endif
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index 630212fa9b9d..ad649a8a74a0 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -63,6 +63,7 @@ int main(void)
 
 	OFFSET(TSS_ist, tss_struct, x86_tss.ist);
 	OFFSET(TSS_sp0, tss_struct, x86_tss.sp0);
+	OFFSET(TSS_sp1, tss_struct, x86_tss.sp1);
 	BLANK();
 
 #ifdef CONFIG_CC_STACKPROTECTOR
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 35d674157fda..86e83762e3b3 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -56,6 +56,16 @@ __visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, cpu_tss) = {
 		 * Poison it.
 		 */
 		.sp0 = (1UL << (BITS_PER_LONG-1)) + 1,
+
+#ifdef CONFIG_X86_64
+		/*
+		 * .sp1 is cpu_current_top_of_stack.  The init task never
+		 * runs user code, but cpu_current_top_of_stack should still
+		 * be well defined before the first context switch.
+		 */
+		.sp1 = TOP_OF_INIT_STACK,
+#endif
+
 #ifdef CONFIG_X86_32
 		.ss0 = __KERNEL_DS,
 		.ss1 = __KERNEL_CS,
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index eeeb34f85c25..bafe65b08697 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -462,6 +462,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 * Switch the PDA and FPU contexts.
 	 */
 	this_cpu_write(current_task, next_p);
+	this_cpu_write(cpu_current_top_of_stack, task_top_of_stack(next_p));
 
 	/* Reload sp0. */
 	update_sp0(next_p);
-- 
2.13.6

[PATCH v2 12/18] x86/espfix/64: Stop assuming that pt_regs is on the entry stack

[Andy Lutomirski]

When we start using an entry trampoline, a #GP from userspace will
be delivered on the entry stack, not on the task stack.  Fix the
espfix64 #DF fixup to set up #GP according to TSS.SP0, rather than
assuming that pt_regs + 1 == SP0.  This won't change anything
without an entry stack, but it will make the code continue to work
when an entry stack is added.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/kernel/traps.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 81841f27beff..1ea03027a4a9 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -358,7 +358,8 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
 		regs->cs == __KERNEL_CS &&
 		regs->ip == (unsigned long)native_irq_return_iret)
 	{
-		struct pt_regs *normal_regs = task_pt_regs(current);
+		struct pt_regs *normal_regs =
+			(struct pt_regs *)this_cpu_read(cpu_tss.x86_tss.sp0) - 1;
 
 		/* Fake a #GP(0) from userspace. */
 		memmove(&normal_regs->ip, (void *)regs->sp, 5*8);
@@ -389,7 +390,7 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
 	 *
 	 *   Processors update CR2 whenever a page fault is detected. If a
 	 *   second page fault occurs while an earlier page fault is being
-	 *   deliv- ered, the faulting linear address of the second fault will
+	 *   delivered, the faulting linear address of the second fault will
 	 *   overwrite the contents of CR2 (replacing the previous
 	 *   address). These updates to CR2 occur even if the page fault
 	 *   results in a double fault or occurs during the delivery of a
-- 
2.13.6

[PATCH v2 13/18] x86/asm/64: Use a percpu trampoline stack for IDT entries

[Andy Lutomirski]

Historically, IDT entries from usermode have always gone directly
to the running task's kernel stack.  Rearrange it so that we enter on
a percpu trampoline stack and then manually switch to the task's stack.
This touches a couple of extra cachelines, but it gives us a chance
to run some code before we touch the kernel stack.

The asm isn't exactly beautiful, but I think that fully refactoring
it can wait.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/entry/entry_64.S        | 61 ++++++++++++++++++++++++++++++++--------
 arch/x86/entry/entry_64_compat.S |  4 +++
 arch/x86/include/asm/switch_to.h |  2 +-
 arch/x86/include/asm/traps.h     |  1 -
 arch/x86/kernel/cpu/common.c     |  6 ++--
 arch/x86/kernel/traps.c          | 15 +++++-----
 6 files changed, 67 insertions(+), 22 deletions(-)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 5063ed1214dd..d55785e9dc8e 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -560,6 +560,14 @@ END(irq_entries_start)
 	.macro interrupt func
 	cld
 	ALLOC_PT_GPREGS_ON_STACK
+
+	testb	$3, CS(%rsp)
+	jz	1f
+	SWAPGS
+	call	switch_to_thread_stack
+	SWAPGS
+1:
+
 	SAVE_C_REGS
 	SAVE_EXTRA_REGS
 	ENCODE_FRAME_POINTER
@@ -827,6 +835,33 @@ apicinterrupt IRQ_WORK_VECTOR			irq_work_interrupt		smp_irq_work_interrupt
  */
 #define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss) + (TSS_ist + ((x) - 1) * 8)
 
+/*
+ * Switch to the thread stack.  This is called with the IRET frame and
+ * orig_ax in pt_regs and the rest of pt_regs allocated, but with all GPRs
+ * in the CPU registers.
+ */
+ENTRY(switch_to_thread_stack)
+	UNWIND_HINT_IRET_REGS offset=17*8
+
+	movq	%rdi, RDI+8(%rsp)
+	movq	%rsp, %rdi
+	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
+	UNWIND_HINT_IRET_REGS offset=17*8 base=%rdi
+
+	pushq	SS+8(%rdi)		/* regs->ss */
+	pushq	RSP+8(%rdi)		/* regs->rsp */
+	pushq	EFLAGS+8(%rdi)		/* regs->eflags */
+	pushq	CS+8(%rdi)		/* regs->cs */
+	pushq	RIP+8(%rdi)		/* regs->ip */
+	pushq	ORIG_RAX+8(%rdi)	/* regs->orig_ax */
+	ALLOC_PT_GPREGS_ON_STACK	/* allocate the rest of regs */
+	pushq	(%rdi)			/* return address */
+
+	movq	RDI+8(%rdi), %rdi
+	UNWIND_HINT_IRET_REGS offset=17*8
+	ret
+END(switch_to_thread_stack)
+
 .macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
 ENTRY(\sym)
 	UNWIND_HINT_IRET_REGS offset=\has_error_code*8
@@ -844,11 +879,12 @@ ENTRY(\sym)
 
 	ALLOC_PT_GPREGS_ON_STACK
 
-	.if \paranoid
-	.if \paranoid == 1
+	.if \paranoid < 2
 	testb	$3, CS(%rsp)			/* If coming from userspace, switch stacks */
-	jnz	1f
+	jnz	.Lfrom_usermode_switch_stack_\@
 	.endif
+
+	.if \paranoid
 	call	paranoid_entry
 	.else
 	call	error_entry
@@ -890,20 +926,15 @@ ENTRY(\sym)
 	jmp	error_exit
 	.endif
 
-	.if \paranoid == 1
+	.if \paranoid < 2
 	/*
-	 * Paranoid entry from userspace.  Switch stacks and treat it
+	 * Entry from userspace.  Switch stacks and treat it
 	 * as a normal entry.  This means that paranoid handlers
 	 * run in real process context if user_mode(regs).
 	 */
-1:
+.Lfrom_usermode_switch_stack_\@:
 	call	error_entry
 
-
-	movq	%rsp, %rdi			/* pt_regs pointer */
-	call	sync_regs
-	movq	%rax, %rsp			/* switch stack */
-
 	movq	%rsp, %rdi			/* pt_regs pointer */
 
 	.if \has_error_code
@@ -1164,6 +1195,14 @@ ENTRY(error_entry)
 	SWAPGS
 
 .Lerror_entry_from_usermode_after_swapgs:
+	/* Put us onto the real thread stack. */
+	leaq	8(%rsp), %rdi			/* pt_regs pointer */
+	movq	(%rsp), %r12
+	call	sync_regs
+	movq	%rax, %rsp			/* switch stack */
+	ENCODE_FRAME_POINTER
+	pushq	%r12
+
 	/*
 	 * We need to tell lockdep that IRQs are off.  We can't do this until
 	 * we fix gsbase, and we should do it before enter_from_user_mode
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index dcc6987f9bae..20398e3c5e2e 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -297,6 +297,10 @@ ENTRY(entry_INT80_compat)
 	ASM_CLAC			/* Do this early to minimize exposure */
 	SWAPGS
 
+	subq	$16*8, %rsp
+	call	switch_to_thread_stack
+	addq	$16*8, %rsp
+
 	/*
 	 * User tracing code (ptrace or signal handlers) might assume that
 	 * the saved RAX contains a 32-bit number when we're invoking a 32-bit
diff --git a/arch/x86/include/asm/switch_to.h b/arch/x86/include/asm/switch_to.h
index 8c6bd6863db9..a6796ac8d311 100644
--- a/arch/x86/include/asm/switch_to.h
+++ b/arch/x86/include/asm/switch_to.h
@@ -93,7 +93,7 @@ static inline void update_sp0(struct task_struct *task)
 #ifdef CONFIG_X86_32
 	load_sp0(task->thread.sp0);
 #else
-	load_sp0(task_top_of_stack(task));
+	/* On x86_64, sp0 always points to the entry trampoline stack. */
 #endif
 }
 
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index 1fadd310ff68..31051f35cbb7 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -75,7 +75,6 @@ dotraplinkage void do_segment_not_present(struct pt_regs *, long);
 dotraplinkage void do_stack_segment(struct pt_regs *, long);
 #ifdef CONFIG_X86_64
 dotraplinkage void do_double_fault(struct pt_regs *, long);
-asmlinkage struct pt_regs *sync_regs(struct pt_regs *);
 #endif
 dotraplinkage void do_general_protection(struct pt_regs *, long);
 dotraplinkage void do_page_fault(struct pt_regs *, unsigned long);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d551bb4339ec..ddf99d50c26c 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1646,11 +1646,13 @@ void cpu_init(void)
 	setup_cpu_entry_area(cpu);
 
 	/*
-	 * Initialize the TSS.  Don't bother initializing sp0, as the initial
-	 * task never enters user mode.
+	 * Initialize the TSS.  sp0 points to the entry trampoline stack
+	 * regardless of what task is running.
 	 */
 	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
 	load_TR_desc();
+	load_sp0((unsigned long)&get_cpu_entry_area(cpu)->tss +
+		 offsetofend(struct tss_struct, SYSENTER_stack));
 
 	load_mm_ldt(&init_mm);
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 1ea03027a4a9..1995d5d32521 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -610,9 +610,10 @@ NOKPROBE_SYMBOL(do_int3);
  * interrupted code was in user mode. The actual stack switch is done in
  * entry_64.S
  */
-asmlinkage __visible notrace struct pt_regs *sync_regs(struct pt_regs *eregs)
+asmlinkage __visible notrace
+struct pt_regs *sync_regs(struct pt_regs *eregs)
 {
-	struct pt_regs *regs = task_pt_regs(current);
+	struct pt_regs *regs = (struct pt_regs *)this_cpu_read(cpu_current_top_of_stack) - 1;
 	*regs = *eregs;
 	return regs;
 }
@@ -629,13 +630,13 @@ struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s)
 	/*
 	 * This is called from entry_64.S early in handling a fault
 	 * caused by a bad iret to user mode.  To handle the fault
-	 * correctly, we want move our stack frame to task_pt_regs
-	 * and we want to pretend that the exception came from the
-	 * iret target.
+	 * correctly, we want move our stack frame to where it would
+	 * be had we entered directly on the entry stack (rather than
+	 * just below the IRET frame) and we want to pretend that the
+	 * exception came from the iret target.
 	 */
 	struct bad_iret_stack *new_stack =
-		container_of(task_pt_regs(current),
-			     struct bad_iret_stack, regs);
+		(struct bad_iret_stack *)this_cpu_read(cpu_tss.x86_tss.sp0) - 1;
 
 	/* Copy the IRET target to the new stack. */
 	memmove(&new_stack->regs.ip, (void *)s->regs.sp, 5*8);
-- 
2.13.6

[PATCH v2 14/18] x86/asm/64: Return to userspace from the trampoline stack

[Andy Lutomirski]

By itself, this is useless.  It gives us the ability to run some final
code before exit that cannnot run on the kernel stack.  This could
include a CR3 switch a la KAISER or some kernel stack erasing, for
example.  (Or even weird things like *changing* which kernel stack
gets used as an ASLR-strengthening mechanism.)

The SYSRET32 path is not covered yet.  It could be in the future or
we could just ignore it and force the slow path if needed.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/entry/entry_64.S | 55 +++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 51 insertions(+), 4 deletions(-)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index d55785e9dc8e..1700712103b2 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -326,8 +326,24 @@ syscall_return_via_sysret:
 	popq	%rsi	/* skip rcx */
 	popq	%rdx
 	popq	%rsi
+
+	/*
+	 * Now all regs are restored except RSP and RDI.
+	 * Save old stack pointer and switch to trampoline stack.
+	 */
+	movq	%rsp, %rdi
+	movq	PER_CPU_VAR(cpu_tss + TSS_sp0), %rsp
+
+	pushq	RSP-RDI(%rdi)	/* RSP */
+	pushq	(%rdi)		/* RDI */
+
+	/*
+	 * We are on the trampoline stack.  All regs except RDI are live.
+	 * We can do future final exit work right here.
+	 */
+
 	popq	%rdi
-	movq	RSP-ORIG_RAX(%rsp), %rsp
+	popq	%rsp
 	USERGS_SYSRET64
 END(entry_SYSCALL_64)
 
@@ -634,10 +650,41 @@ GLOBAL(swapgs_restore_regs_and_return_to_usermode)
 	ud2
 1:
 #endif
-	SWAPGS
 	POP_EXTRA_REGS
-	POP_C_REGS
-	addq	$8, %rsp	/* skip regs->orig_ax */
+	popq	%r11
+	popq	%r10
+	popq	%r9
+	popq	%r8
+	popq	%rax
+	popq	%rcx
+	popq	%rdx
+	popq	%rsi
+
+	/*
+	 * The stack is now user RDI, orig_ax, RIP, CS, EFLAGS, RSP, SS.
+	 * Save old stack pointer and switch to trampoline stack.
+	 */
+	movq	%rsp, %rdi
+	movq	PER_CPU_VAR(cpu_tss + TSS_sp0), %rsp
+
+	/* Copy the IRET frame to the trampoline stack. */
+	pushq	6*8(%rdi)	/* SS */
+	pushq	5*8(%rdi)	/* RSP */
+	pushq	4*8(%rdi)	/* EFLAGS */
+	pushq	3*8(%rdi)	/* CS */
+	pushq	2*8(%rdi)	/* RIP */
+
+	/* Push user RDI on the trampoline stack. */
+	pushq	(%rdi)
+
+	/*
+	 * We are on the trampoline stack.  All regs except RDI are live.
+	 * We can do future final exit work right here.
+	 */
+
+	/* Restore RDI. */
+	popq	%rdi
+	SWAPGS
 	INTERRUPT_RETURN
 
 
-- 
2.13.6

[PATCH v2 15/18] x86/entry/64: Create a percpu SYSCALL entry trampoline

[Andy Lutomirski]

Handling SYSCALL is tricky: the SYSCALL handler is entered with every
single register (except FLAGS), including RSP, live.  It somehow needs
to set RSP to point to a valid stack, which means it needs to save the
user RSP somewhere and find its own stack pointer.  The canonical way
to do this is with SWAPGS, which lets us access percpu data using the
%gs prefix.

With KAISER-like pagetable switching, this is problematic.  Without a
scratch register, switching CR3 is impossible, so %gs-based percpu
memory would need to be mapped in the user pagetables.  Doing that
without information leaks is difficult or impossible.

Instead, use a different sneaky trick.  Map a copy of the first part
of the SYSCALL asm at a different address for each CPU.  Now RIP
varies depending on the CPU, so we can use RIP-relative memory access
to access percpu memory.  By putting the relevant information (one
scratch slot and the stack address) at a constant offset relative to
RIP, we can make SYSCALL work without relying on %gs.

A nice thing about this approach is that we can easily switch it on
and off if we want pagetable switching to be configurable.

The compat variant of SYSCALL doesn't have this problem in the first
place -- there are plenty of scratch registers, since we don't care
about preserving r8-r15.  This patch therefore doesn't touch SYSCALL32
at all.

XXX: Whenever we settle how KAISER gets turned on and off, we should do
the same to this.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/entry/entry_64.S     | 48 +++++++++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/fixmap.h |  2 ++
 arch/x86/kernel/asm-offsets.c |  1 +
 arch/x86/kernel/cpu/common.c  | 12 ++++++++++-
 arch/x86/kernel/vmlinux.lds.S | 10 +++++++++
 5 files changed, 72 insertions(+), 1 deletion(-)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 1700712103b2..2fdd2127e8e9 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -136,6 +136,54 @@ END(native_usergs_sysret64)
  * with them due to bugs in both AMD and Intel CPUs.
  */
 
+	.pushsection .entry_trampoline, "ax"
+
+/*
+ * The code in here gets remapped into cpu_entry_area's trampoline.  This means
+ * that the assembler and linker have the wrong idea as to where this code
+ * lives (and, in fact, it's mapped more than once, so it's not even at a
+ * fixed address).  So we can't reference any symbols outside the entry
+ * trampoline and expect it to work.
+ *
+ * Instead, we carefully abuse %rip-relative addressing.
+ * .Lentry_trampoline(%rip) refers to the start of the remapped) entry
+ * trampoline.  We can thus find cpu_entry_area with this macro:
+ */
+
+#define CPU_ENTRY_AREA \
+	_entry_trampoline - CPU_ENTRY_AREA_entry_trampoline(%rip)
+
+/* The top word of the SYSENTER stack is hot and is usable as scratch space. */
+#define RSP_SCRATCH CPU_ENTRY_AREA_tss + CPU_TSS_SYSENTER_stack + \
+	SIZEOF_SYSENTER_stack - 8 + CPU_ENTRY_AREA
+
+ENTRY(entry_SYSCALL_64_trampoline)
+	UNWIND_HINT_EMPTY
+	swapgs
+
+	/* Stash the user RSP. */
+	movq	%rsp, RSP_SCRATCH
+
+	/* Load the top of the task stack into RSP */
+	movq	CPU_ENTRY_AREA_tss + TSS_sp1 + CPU_ENTRY_AREA, %rsp
+
+	/* Start building the simulated IRET frame. */
+	pushq	$__USER_DS			/* pt_regs->ss */
+	pushq	RSP_SCRATCH			/* pt_regs->sp */
+	pushq	%r11				/* pt_regs->flags */
+	pushq	$__USER_CS			/* pt_regs->cs */
+	pushq	%rcx				/* pt_regs->ip */
+
+	/*
+	 * x86 lacks a near absolute jump, and we can't jump to the real
+	 * entry text with a relative jump, so we fake it using retq.
+	 */
+	pushq	$entry_SYSCALL_64_after_hwframe
+	retq
+END(entry_SYSCALL_64_trampoline)
+
+	.popsection
+
 ENTRY(entry_SYSCALL_64)
 	UNWIND_HINT_EMPTY
 	/*
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index ccf34181d925..f13ee74d2d58 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -59,6 +59,8 @@ struct cpu_entry_area
 	 * of the TSS region.
 	 */
 	struct tss_struct tss;
+
+	char entry_trampoline[PAGE_SIZE];
 };
 
 #define CPU_ENTRY_AREA_PAGES (sizeof(struct cpu_entry_area) / PAGE_SIZE)
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index 55858b277cf6..61b1af88ac07 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -101,4 +101,5 @@ void common(void) {
 
 	/* Layout info for cpu_entry_area */
 	OFFSET(CPU_ENTRY_AREA_tss, cpu_entry_area, tss);
+	OFFSET(CPU_ENTRY_AREA_entry_trampoline, cpu_entry_area, entry_trampoline);
 }
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index ddf99d50c26c..272cc62cdcbd 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -507,6 +507,8 @@ DEFINE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
 static inline void setup_cpu_entry_area(int cpu)
 {
 #ifdef CONFIG_X86_64
+	extern char _entry_trampoline[];
+
 	/* On 64-bit systems, we use a read-only fixmap GDT. */
 	pgprot_t gdt_prot = PAGE_KERNEL_RO;
 #else
@@ -554,6 +556,11 @@ static inline void setup_cpu_entry_area(int cpu)
 #ifdef CONFIG_X86_32
 	this_cpu_write(cpu_entry_area, get_cpu_entry_area(cpu));
 #endif
+
+#ifdef CONFIG_X86_64
+	__set_fixmap(get_cpu_entry_area_index(cpu, entry_trampoline),
+		     __pa_symbol(_entry_trampoline), PAGE_KERNEL_RX);
+#endif
 }
 
 /* Load the original GDT from the per-cpu structure */
@@ -1418,10 +1425,13 @@ static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
 /* May not be marked __init: used by software suspend */
 void syscall_init(void)
 {
+	extern char _entry_trampoline[];
+	extern char entry_SYSCALL_64_trampoline[];
+
 	int cpu = smp_processor_id();
 
 	wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
-	wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
+	wrmsrl(MSR_LSTAR, (unsigned long)get_cpu_entry_area(cpu)->entry_trampoline + (entry_SYSCALL_64_trampoline - _entry_trampoline));
 
 #ifdef CONFIG_IA32_EMULATION
 	wrmsrl(MSR_CSTAR, (unsigned long)entry_SYSCALL_compat);
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index a4009fb9be87..2738cfb6c8c8 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -107,6 +107,16 @@ SECTIONS
 		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
+
+#ifdef CONFIG_X86_64
+		/* Entry trampoline */
+		. = ALIGN(PAGE_SIZE);
+		_entry_trampoline = .;
+		*(.entry_trampoline)
+		. = ALIGN(PAGE_SIZE);
+		ASSERT(. - _entry_trampoline == PAGE_SIZE, "entry trampoline is too big");
+#endif
+
 		/* End of text section */
 		_etext = .;
 	} :text = 0x9090
-- 
2.13.6

[PATCH v2 16/18] x86/irq: Remove an old outdated comment about context tracking races

[Andy Lutomirski]

That race has been fixed and code cleaned up for a while now.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/kernel/irq.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 49cfd9fe7589..68e1867cca80 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -219,18 +219,6 @@ __visible unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
 	/* high bit used in ret_from_ code  */
 	unsigned vector = ~regs->orig_ax;
 
-	/*
-	 * NB: Unlike exception entries, IRQ entries do not reliably
-	 * handle context tracking in the low-level entry code.  This is
-	 * because syscall entries execute briefly with IRQs on before
-	 * updating context tracking state, so we can take an IRQ from
-	 * kernel mode with CONTEXT_USER.  The low-level entry code only
-	 * updates the context if we came from user mode, so we won't
-	 * switch to CONTEXT_KERNEL.  We'll fix that once the syscall
-	 * code is cleaned up enough that we can cleanly defer enabling
-	 * IRQs.
-	 */
-
 	entering_irq();
 
 	/* entering_irq() tells RCU that we're not quiescent.  Check it. */
-- 
2.13.6

[PATCH v2 17/18] x86/irq/64: In the stack overflow warning, print the offending IP

[Andy Lutomirski]

In case something goes wrong with unwind (not unlikely in case of
overflow), print the offending IP where we detected the overflow.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/kernel/irq_64.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 020efbf5786b..d86e344f5b3d 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -57,10 +57,10 @@ static inline void stack_overflow_check(struct pt_regs *regs)
 	if (regs->sp >= estack_top && regs->sp <= estack_bottom)
 		return;
 
-	WARN_ONCE(1, "do_IRQ(): %s has overflown the kernel stack (cur:%Lx,sp:%lx,irq stk top-bottom:%Lx-%Lx,exception stk top-bottom:%Lx-%Lx)\n",
+	WARN_ONCE(1, "do_IRQ(): %s has overflown the kernel stack (cur:%Lx,sp:%lx,irq stk top-bottom:%Lx-%Lx,exception stk top-bottom:%Lx-%Lx,ip:%pF)\n",
 		current->comm, curbase, regs->sp,
 		irq_stack_top, irq_stack_bottom,
-		estack_top, estack_bottom);
+		estack_top, estack_bottom, (void *)regs->ip);
 
 	if (sysctl_panic_on_stackoverflow)
 		panic("low stack detected by irq handler - check messages\n");
-- 
2.13.6

[PATCH v2 18/18] x86/entry/64: Move the IST stacks into cpu_entry_area

[Andy Lutomirski]

The IST stacks are needed when an IST exception occurs and are
accessed before any kernel code at all runs.  Move them into
cpu_entry_area.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/include/asm/fixmap.h | 10 ++++++++++
 arch/x86/kernel/cpu/common.c  | 40 +++++++++++++++++++++++++---------------
 2 files changed, 35 insertions(+), 15 deletions(-)

diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index f13ee74d2d58..c9269d1921c5 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -61,6 +61,16 @@ struct cpu_entry_area
 	struct tss_struct tss;
 
 	char entry_trampoline[PAGE_SIZE];
+
+#ifdef CONFIG_X86_64
+	/*
+	 * Exception stacks used for IST entries.
+	 *
+	 * In the future, this should have a separate slot for each stack
+	 * with guard pages between them.
+	 */
+	char exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ];
+#endif
 };
 
 #define CPU_ENTRY_AREA_PAGES (sizeof(struct cpu_entry_area) / PAGE_SIZE)
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 272cc62cdcbd..1f7e7121c8d2 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -503,6 +503,22 @@ static void set_percpu_fixmap_pages(int fixmap_index, void *ptr, int pages,
 DEFINE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
 #endif
 
+#ifdef CONFIG_X86_64
+/*
+ * Special IST stacks which the CPU switches to when it calls
+ * an IST-marked descriptor entry. Up to 7 stacks (hardware
+ * limit), all of them are 4K, except the debug stack which
+ * is 8K.
+ */
+static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
+	  [0 ... N_EXCEPTION_STACKS - 1]	= EXCEPTION_STKSZ,
+	  [DEBUG_STACK - 1]			= DEBUG_STKSZ
+};
+
+static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
+	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
+#endif
+
 /* Setup the fixmap mappings only once per-processor */
 static inline void setup_cpu_entry_area(int cpu)
 {
@@ -558,6 +574,14 @@ static inline void setup_cpu_entry_area(int cpu)
 #endif
 
 #ifdef CONFIG_X86_64
+	BUILD_BUG_ON(sizeof(exception_stacks) % PAGE_SIZE != 0);
+	BUILD_BUG_ON(sizeof(exception_stacks) !=
+		     sizeof(((struct cpu_entry_area *)0)->exception_stacks));
+	set_percpu_fixmap_pages(get_cpu_entry_area_index(cpu, exception_stacks),
+				&per_cpu(exception_stacks, cpu),
+				sizeof(exception_stacks) / PAGE_SIZE,
+				PAGE_KERNEL);
+
 	__set_fixmap(get_cpu_entry_area_index(cpu, entry_trampoline),
 		     __pa_symbol(_entry_trampoline), PAGE_KERNEL_RX);
 #endif
@@ -1408,20 +1432,6 @@ DEFINE_PER_CPU(unsigned int, irq_count) __visible = -1;
 DEFINE_PER_CPU(int, __preempt_count) = INIT_PREEMPT_COUNT;
 EXPORT_PER_CPU_SYMBOL(__preempt_count);
 
-/*
- * Special IST stacks which the CPU switches to when it calls
- * an IST-marked descriptor entry. Up to 7 stacks (hardware
- * limit), all of them are 4K, except the debug stack which
- * is 8K.
- */
-static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
-	  [0 ... N_EXCEPTION_STACKS - 1]	= EXCEPTION_STKSZ,
-	  [DEBUG_STACK - 1]			= DEBUG_STKSZ
-};
-
-static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
-	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
-
 /* May not be marked __init: used by software suspend */
 void syscall_init(void)
 {
@@ -1627,7 +1637,7 @@ void cpu_init(void)
 	 * set up and load the per-CPU TSS
 	 */
 	if (!oist->ist[0]) {
-		char *estacks = per_cpu(exception_stacks, cpu);
+		char *estacks = get_cpu_entry_area(cpu)->exception_stacks;
 
 		for (v = 0; v < N_EXCEPTION_STACKS; v++) {
 			estacks += exception_stack_sizes[v];
-- 
2.13.6

Re: [PATCH v2 01/18] x86/entry/64: Fix entry_SYSCALL_64_after_hwframe IRQ tracing

[Ingo Molnar]

* Andy Lutomirski <luto@kernel.org> wrote:

> When I added entry_SYSCALL_64_after_hwframe, I left TRACE_IRQS_OFF
> before it.  This means that users of entry_SYSCALL_64_after_hwframe
> were responsible for invoking TRACE_IRQS_OFF, and the one and only
> user (added in the same commit) got it wrong.
> 
> I think this would manifest as a warning if a Xen PV guest with
> CONFIG_DEBUG_LOCKDEP=y were used with context tracking.  (The
> context tracking bit is to cause lockdep to get invoked before we
> turn IRQs back on.)  I haven't tested that for real yet because I
> can't get a kernel configured like that to boot at all on Xen PV.
> I've reported it upstream.  The problem seems to be that Xen PV is
> missing early #UD handling, is hitting some WARN, and we rely on

JFYI, seems the changelog got truncated at this point - I simply removed that 
partial sentence as I suppose those details will be explained in the Xen fix 
anyway.

> Move TRACE_IRQS_OFF below the label.

Thanks,

	Ingo

Re: [PATCH v2 06/18] x86/kasan/64: Teach KASAN about the cpu_entry_area

[Ingo Molnar]

* Andy Lutomirski <luto@kernel.org> wrote:

> The cpu_entry_area will contain stacks.  Make sure that KASAN has
> appropriate shadow mappings for them.
> 
> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
> Cc: Alexander Potapenko <glider@google.com>
> Cc: Dmitry Vyukov <dvyukov@google.com>
> Cc: kasan-dev@googlegroups.com
> Signed-off-by: Andy Lutomirski <luto@kernel.org>
> ---
>  arch/x86/mm/kasan_init_64.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
> index 99dfed6dfef8..43d376687315 100644
> --- a/arch/x86/mm/kasan_init_64.c
> +++ b/arch/x86/mm/kasan_init_64.c
> @@ -330,7 +330,14 @@ void __init kasan_init(void)
>  			      early_pfn_to_nid(__pa(_stext)));
>  
>  	kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)MODULES_END),
> -			(void *)KASAN_SHADOW_END);
> +				   kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM))));
> +
> +	kasan_populate_shadow((unsigned long)kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM))),
> +			      (unsigned long)kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_TOP) + PAGE_SIZE)),
> +		0);
> +
> +	kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_TOP) + PAGE_SIZE)),
> +				   (void *)KASAN_SHADOW_END);

Note, this commit has a dependency on:

  d17a1d97dc20: x86/mm/kasan: don't use vmemmap_populate() to initialize shadow

which got merged upstream outside the x86 tree, so it has a whole bunch of merge 
window dependencies.

To make testing+backporting to v4.14 easier I've cherry-picked d17a1d97dc20 into 
x86/urgent.

( I've Cc:-ed Linus, just in case this kind of preemptive cherry-picking is 
  frowned upon. )

Thanks,

	Ingo

Re: [PATCH v2 00/18] Entry stack switching

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 1750 bytes --]


* Andy Lutomirski <luto@kernel.org> wrote:

> This sets up stack switching, including for SYSCALL.  I think it's
> in decent shape.
> 
> Known issues:
>  - I think we're going to want a way to turn the stack switching on and
>    off either at boot time or at runtime.  It should be fairly straightforward
>    to make it work.
> 
>  - I think the ORC unwinder isn't so good at dealing with stack overflows.
>    It bails too early (I think), resulting in lots of ? entries.  This
>    isn't a regression with this series -- it's just something that could
>    be improved.
> 
> Ingo, patch 1 may be tip/urgent material.  It fixes what I think is
> a bug in Xen.  I'm having a hard time testing because it's being
> masked by a bigger unrelated bug that's keeping Xen from booting
> when configured to hit the bug I'm fixing.  (The latter bug goes at
> least back to v4.13, I think I know roughtly what's wrong, and I've
> reported it to the maintainers.)

Hm, with this series the previous IRQ vector bug appears again:

[   51.156370] do_IRQ: 16.34 No irq handler for vector
[   57.511030] do_IRQ: 16.34 No irq handler for vector
[   57.528335] do_IRQ: 16.34 No irq handler for vector
[   57.533256] do_IRQ: 16.34 No irq handler for vector
[   63.991913] do_IRQ: 16.34 No irq handler for vector
[   63.996810] do_IRQ: 16.34 No irq handler for vector

I've attached the reproducer config. Note that the system appears to be working to 
a certain extent (I could ssh to it and extract its config), but produces these 
warnings sporadically.

Also note that this is the same AMD system tha had irq-tracing/lockdep troubles 
yesterday. So maybe this warning is related and we either have broken lockdep, or 
these IRQ vector warnings.

Thanks,

	Ingo

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 112298 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.14.0 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_FORCE=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=m
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_THIN_ARCHIVES=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_INTEL_RDT is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
# CONFIG_X86_UV is not set
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=m
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=128
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_5LEVEL is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=9
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
# CONFIG_ZSWAP is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_ZONE_DEVICE=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_X86_PMEM_LEGACY is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_INTEL_UMIP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=y

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT is not set

#
# PCI host controller drivers
#
# CONFIG_VMD is not set

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_NET_INGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=y
# CONFIG_IPV6_ILA is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NF_LOG_NETDEV is not set
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
CONFIG_NF_REJECT_IPV4=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_SAMPLE is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
CONFIG_BT=y
CONFIG_BT_BREDR=y
# CONFIG_BT_RFCOMM is not set
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_LEDS is not set
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
# CONFIG_DST_CACHE is not set
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
# CONFIG_DMA_SHARED_BUFFER is not set

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
# CONFIG_CXL_LIB is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=y
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BCACHE=y
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_AMD_XGBE is not set
# CONFIG_AMD_XGBE_HAVE_ECC is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
# CONFIG_E1000 is not set
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
# CONFIG_NET_VENDOR_I825XX is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_PCMCIA_PCNET is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_PCMCIA_RAYCS is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
# CONFIG_SERIAL_8250_MID is not set
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_SCR24X is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS68470 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
# CONFIG_LIRC is not set
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_XMP_DECODER=y
# CONFIG_RC_DEVICES is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
# CONFIG_DRM is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_LIB_RANDOM is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_VGASTATE is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=y
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_DJ is not set
# CONFIG_HID_LOGITECH_HIDPP is not set
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=y
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set

#
# USB Power Delivery and Type-C drivers
#
# CONFIG_TYPEC_UCSI is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD64=y
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_IE31200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I7CORE is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
# CONFIG_EDAC_SBRIDGE is not set
# CONFIG_EDAC_SKX is not set
# CONFIG_EDAC_PND2 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_INTEL_IDMA64 is not set
CONFIG_INTEL_IOATDMA=y
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
# CONFIG_IMG_ASCII_LCD is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV_TSCPAGE is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_LAPTOP is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_CHT_INT33FE is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_MLX_CPLD_PLATFORM is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#

#
# Broadcom SoC drivers
#

#
# i.MX SoC drivers
#

#
# Qualcomm SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_ARM_GIC_V3_ITS is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=y
# CONFIG_DEV_DAX is not set
CONFIG_NVMEM=y
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_FPGA is not set

#
# FSI support
#
# CONFIG_FSI is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_APPLE_PROPERTIES is not set
# CONFIG_RESET_ATTACK_MITIGATION is not set
CONFIG_UEFI_CPER=y
# CONFIG_EFI_DEV_PATH_PARSER is not set

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_EFIVAR_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_ZLIB_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_DEBUG=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VM_PGFLAGS is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_LOCKDEP_CROSSRELEASE=y
CONFIG_LOCKDEP_COMPLETIONS=y
# CONFIG_BOOTPARAM_LOCKDEP_CROSSRELEASE_FULLSTACK is not set
CONFIG_DEBUG_LOCKDEP=y
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_UPROBE_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_EARLY_PRINTK_USB=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
CONFIG_CRYPTO_ENGINE=m

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=y
CONFIG_KVM_MMU_AUDIT=y
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_UCS2_STRING=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set

Re: [PATCH v2 00/18] Entry stack switching

[Ingo Molnar]

* Ingo Molnar <mingo@kernel.org> wrote:

> 
> * Andy Lutomirski <luto@kernel.org> wrote:
> 
> > This sets up stack switching, including for SYSCALL.  I think it's
> > in decent shape.
> > 
> > Known issues:
> >  - I think we're going to want a way to turn the stack switching on and
> >    off either at boot time or at runtime.  It should be fairly straightforward
> >    to make it work.
> > 
> >  - I think the ORC unwinder isn't so good at dealing with stack overflows.
> >    It bails too early (I think), resulting in lots of ? entries.  This
> >    isn't a regression with this series -- it's just something that could
> >    be improved.
> > 
> > Ingo, patch 1 may be tip/urgent material.  It fixes what I think is
> > a bug in Xen.  I'm having a hard time testing because it's being
> > masked by a bigger unrelated bug that's keeping Xen from booting
> > when configured to hit the bug I'm fixing.  (The latter bug goes at
> > least back to v4.13, I think I know roughtly what's wrong, and I've
> > reported it to the maintainers.)
> 
> Hm, with this series the previous IRQ vector bug appears again:
> 
> [   51.156370] do_IRQ: 16.34 No irq handler for vector
> [   57.511030] do_IRQ: 16.34 No irq handler for vector
> [   57.528335] do_IRQ: 16.34 No irq handler for vector
> [   57.533256] do_IRQ: 16.34 No irq handler for vector
> [   63.991913] do_IRQ: 16.34 No irq handler for vector
> [   63.996810] do_IRQ: 16.34 No irq handler for vector
> 
> I've attached the reproducer config. Note that the system appears to be working to 
> a certain extent (I could ssh to it and extract its config), but produces these 
> warnings sporadically.
> 
> Also note that this is the same AMD system tha had irq-tracing/lockdep troubles 
> yesterday. So maybe this warning is related and we either have broken lockdep, or 
> these IRQ vector warnings.

Yeah, so I just double checked, if from the latest series I revert:

  x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing

then I (no surprise) get the bootup lockdep warning - but don't get the IRQ vector 
warnings.

Thanks,

	Ingo

WARNING: can't dereference registers at ffffc90004dfff60 for ip error_entry+0x7d/0xd0 (Re: [PATCH v2 00/18] Entry stack switching)

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 963 bytes --]


* Andy Lutomirski <luto@kernel.org> wrote:

> This sets up stack switching, including for SYSCALL.  I think it's
> in decent shape.
> 
> Known issues:
>  - I think we're going to want a way to turn the stack switching on and
>    off either at boot time or at runtime.  It should be fairly straightforward
>    to make it work.
> 
>  - I think the ORC unwinder isn't so good at dealing with stack overflows.
>    It bails too early (I think), resulting in lots of ? entries.  This
>    isn't a regression with this series -- it's just something that could
>    be improved.

Note that with the attached config on an Intel testbox I get the following new ORC 
unwinder warning during bootup:

[   12.200554] calling  ghash_pclmulqdqni_mod_init+0x0/0x54 @ 1
[   12.209536] WARNING: can't dereference registers at ffffc90004dfff60 for ip error_entry+0x7d/0xd0
[   12.231388] initcall ghash_pclmulqdqni_mod_init+0x0/0x54 returned 0 after 23480 usecs

Thanks,

	Ingo

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 115158 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.14.0 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_FORCE=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=m
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_THIN_ARCHIVES=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_INTEL_RDT is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
# CONFIG_X86_UV is not set
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=128
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_5LEVEL is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=9
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
# CONFIG_ZSWAP is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_ZONE_DEVICE=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_X86_PMEM_LEGACY is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_INTEL_UMIP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="lapic=notscdeadline"
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=y

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT is not set

#
# PCI host controller drivers
#
# CONFIG_VMD is not set

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_NET_INGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=y
# CONFIG_IPV6_ILA is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NF_LOG_NETDEV is not set
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
CONFIG_NF_REJECT_IPV4=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_SAMPLE is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
CONFIG_BT=y
CONFIG_BT_BREDR=y
# CONFIG_BT_RFCOMM is not set
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_LEDS is not set
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
# CONFIG_DST_CACHE is not set
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
# CONFIG_DMA_SHARED_BUFFER is not set

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
# CONFIG_CXL_LIB is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=y
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_AMD_XGBE is not set
# CONFIG_AMD_XGBE_HAVE_ECC is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
# CONFIG_E1000 is not set
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
# CONFIG_IGBVF is not set
CONFIG_IXGB=y
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
# CONFIG_IXGBE_DCB is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
# CONFIG_NET_VENDOR_I825XX is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_PCMCIA_PCNET is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_PCMCIA_RAYCS is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_ISDN_CAPI is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_HYSDN is not set
# CONFIG_MISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_SCR24X is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=y
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
CONFIG_SP5100_TCO=y
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS68470 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
# CONFIG_LIRC is not set
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_XMP_DECODER=y
# CONFIG_RC_DEVICES is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
# CONFIG_DRM is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_LIB_RANDOM is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_VGASTATE is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=y
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_DJ is not set
# CONFIG_HID_LOGITECH_HIDPP is not set
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=y
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set

#
# USB Power Delivery and Type-C drivers
#
# CONFIG_TYPEC_UCSI is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_GHES=y
# CONFIG_EDAC_AMD64 is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_IE31200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I7CORE is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
# CONFIG_EDAC_SBRIDGE is not set
# CONFIG_EDAC_SKX is not set
# CONFIG_EDAC_PND2 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_INTEL_IDMA64 is not set
CONFIG_INTEL_IOATDMA=y
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_HSU_DMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
# CONFIG_IMG_ASCII_LCD is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV_TSCPAGE is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_LAPTOP is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_CHT_INT33FE is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_MLX_CPLD_PLATFORM is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#

#
# Broadcom SoC drivers
#

#
# i.MX SoC drivers
#

#
# Qualcomm SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_ARM_GIC_V3_ITS is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=y
# CONFIG_DEV_DAX is not set
CONFIG_NVMEM=y
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_FPGA is not set

#
# FSI support
#
# CONFIG_FSI is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_APPLE_PROPERTIES is not set
# CONFIG_RESET_ATTACK_MITIGATION is not set
CONFIG_UEFI_CPER=y
# CONFIG_EFI_DEV_PATH_PARSER is not set

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_EFIVAR_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_ZLIB_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_SWAP is not set
# CONFIG_ROOT_NFS is not set
CONFIG_NFS_DEBUG=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
# CONFIG_9P_FS_POSIX_ACL is not set
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VM_PGFLAGS is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_LOCKDEP_CROSSRELEASE=y
CONFIG_LOCKDEP_COMPLETIONS=y
CONFIG_BOOTPARAM_LOCKDEP_CROSSRELEASE_FULLSTACK=y
CONFIG_DEBUG_LOCKDEP=y
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_UPROBE_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_EARLY_PRINTK_USB=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
CONFIG_DEBUG_ENTRY=y
CONFIG_DEBUG_NMI_SELFTEST=y
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
CONFIG_CRYPTO_ENGINE=m

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
CONFIG_KVM_MMU_AUDIT=y
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_UCS2_STRING=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set

Re: WARNING: can't dereference registers at ffffc90004dfff60 for ip error_entry+0x7d/0xd0 (Re: [PATCH v2 00/18] Entry stack switching)

[Ingo Molnar]

* Ingo Molnar <mingo@kernel.org> wrote:

> 
> * Andy Lutomirski <luto@kernel.org> wrote:
> 
> > This sets up stack switching, including for SYSCALL.  I think it's
> > in decent shape.
> > 
> > Known issues:
> >  - I think we're going to want a way to turn the stack switching on and
> >    off either at boot time or at runtime.  It should be fairly straightforward
> >    to make it work.
> > 
> >  - I think the ORC unwinder isn't so good at dealing with stack overflows.
> >    It bails too early (I think), resulting in lots of ? entries.  This
> >    isn't a regression with this series -- it's just something that could
> >    be improved.
> 
> Note that with the attached config on an Intel testbox I get the following new ORC 
> unwinder warning during bootup:
> 
> [   12.200554] calling  ghash_pclmulqdqni_mod_init+0x0/0x54 @ 1
> [   12.209536] WARNING: can't dereference registers at ffffc90004dfff60 for ip error_entry+0x7d/0xd0
> [   12.231388] initcall ghash_pclmulqdqni_mod_init+0x0/0x54 returned 0 after 23480 usecs
> 
> Thanks,

Also note that the ORC warning goes away if CONFIG_PROVE_LOCKING is disabled.

Thanks,

	Ingo

[tip:x86/urgent] x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing

[tip-bot for Andy Lutomirski]

Commit-ID:  548c3050ea8d16997ae27f9e080a8338a606fc93
Gitweb:     https://git.kernel.org/tip/548c3050ea8d16997ae27f9e080a8338a606fc93
Author:     Andy Lutomirski <luto@kernel.org>
AuthorDate: Tue, 21 Nov 2017 20:43:56 -0800
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Wed, 22 Nov 2017 06:35:48 +0100

x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing

When I added entry_SYSCALL_64_after_hwframe(), I left TRACE_IRQS_OFF
before it.  This means that users of entry_SYSCALL_64_after_hwframe()
were responsible for invoking TRACE_IRQS_OFF, and the one and only
user (Xen, added in the same commit) got it wrong.

I think this would manifest as a warning if a Xen PV guest with
CONFIG_DEBUG_LOCKDEP=y were used with context tracking.  (The
context tracking bit is to cause lockdep to get invoked before we
turn IRQs back on.)  I haven't tested that for real yet because I
can't get a kernel configured like that to boot at all on Xen PV.

Move TRACE_IRQS_OFF below the label.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 8a9949bc71a7 ("x86/xen/64: Rearrange the SYSCALL entries")
Link: http://lkml.kernel.org/r/9150aac013b7b95d62c2336751d5b6e91d2722aa.1511325444.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/entry/entry_64.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index a2b30ec..5063ed1 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -148,8 +148,6 @@ ENTRY(entry_SYSCALL_64)
 	movq	%rsp, PER_CPU_VAR(rsp_scratch)
 	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
 
-	TRACE_IRQS_OFF
-
 	/* Construct struct pt_regs on stack */
 	pushq	$__USER_DS			/* pt_regs->ss */
 	pushq	PER_CPU_VAR(rsp_scratch)	/* pt_regs->sp */
@@ -170,6 +168,8 @@ GLOBAL(entry_SYSCALL_64_after_hwframe)
 	sub	$(6*8), %rsp			/* pt_regs->bp, bx, r12-15 not saved */
 	UNWIND_HINT_REGS extra=0
 
+	TRACE_IRQS_OFF
+
 	/*
 	 * If we need to do entry work or if we guess we'll need to do
 	 * exit work, go straight to the slow path.

Re: [PATCH v2 06/18] x86/kasan/64: Teach KASAN about the cpu_entry_area

[Andrey Ryabinin]

On 11/22/2017 07:44 AM, Andy Lutomirski wrote:
> The cpu_entry_area will contain stacks.  Make sure that KASAN has
> appropriate shadow mappings for them.
> 
> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
> Cc: Alexander Potapenko <glider@google.com>
> Cc: Dmitry Vyukov <dvyukov@google.com>
> Cc: kasan-dev@googlegroups.com
> Signed-off-by: Andy Lutomirski <luto@kernel.org>
> ---
>  arch/x86/mm/kasan_init_64.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
> index 99dfed6dfef8..43d376687315 100644
> --- a/arch/x86/mm/kasan_init_64.c
> +++ b/arch/x86/mm/kasan_init_64.c
> @@ -330,7 +330,14 @@ void __init kasan_init(void)
>  			      early_pfn_to_nid(__pa(_stext)));
>  
>  	kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)MODULES_END),
> -			(void *)KASAN_SHADOW_END);
> +				   kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM))));
> +
> +	kasan_populate_shadow((unsigned long)kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM))),
> +			      (unsigned long)kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_TOP) + PAGE_SIZE)),

What's '+ PAGE_SIZE' for?

> +		0);
> +
> +	kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_TOP) + PAGE_SIZE)),
> +				   (void *)KASAN_SHADOW_END);
>  
>  	load_cr3(init_top_pgt);
>  	__flush_tlb_all();
> 

Re: [PATCH v2 04/18] x86/gdt: Put per-cpu GDT remaps in ascending order

[Borislav Petkov]

On Tue, Nov 21, 2017 at 08:43:59PM -0800, Andy Lutomirski wrote:
> We currently have CPU 0's GDT at the top of the GDT range and
> higher-numbered CPUs at lower addreses.  This happens because the
> fixmap is upside down (index 0 is the top of the fixmap).
> 
> Flip it so that GDTs are in ascending order by virtual address.
> This will simplify a future patch that will generalize the GDT
> remap to contain multiple pages.
> 
> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
> Signed-off-by: Andy Lutomirski <luto@kernel.org>
> ---
>  arch/x86/include/asm/desc.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Same reply as before:

https://lkml.kernel.org/r/20171121171643.jtwbfuvxwi6wecj3@pd.tnic

-- 
Regards/Gruss,
    Boris.

SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
-- 

Re: [PATCH v2 03/18] x86/dumpstack: Add get_stack_info() support for the SYSENTER stack

[Borislav Petkov]

On Tue, Nov 21, 2017 at 08:43:58PM -0800, Andy Lutomirski wrote:
> get_stack_info() doesn't currently know about the SYSENTER stack, so
> unwinding will fail if we entered the kernel on the SYSENTER stack
> and haven't fully switched off.  Teach get_stack_info() about the
> SYSENTER stack.
> 
> With future patches applied that run part of the entry code on the
> SYSENTER stack and introduce an intentional BUG(), I would get:
> 
> [    3.962218] PANIC: double fault, error_code: 0x0
> ...
> [    3.963998] task: ffff88001aa18000 task.stack: ffff88001aa20000
> [    3.964526] RIP: 0010:do_error_trap+0x33/0x1c0
> [    3.964947] RSP: 0000:ffffffffff1b8f78 EFLAGS: 00010096
> [    3.965439] RAX: dffffc0000000000 RBX: ffffffffff1b8f90 RCX: 0000000000000006
> [    3.966067] RDX: ffffffff82048b20 RSI: 0000000000000000 RDI: ffffffffff1b9110
> [    3.966696] RBP: ffffffffff1b9088 R08: 0000000000000004 R09: 0000000000000000
> [    3.967316] R10: 0000000000000000 R11: fffffbffffe3723f R12: 0000000000000006
> [    3.967939] R13: 0000000000000000 R14: 0000000000000004 R15: 0000000000000000
> [    3.968565] FS:  0000000000000000(0000) GS:ffff88001ae00000(0000) knlGS:0000000000000000
> [    3.969272] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [    3.969776] CR2: ffffffffff1b8f68 CR3: 0000000019308002 CR4: 00000000003606f0
> [    3.970406] Call Trace:
> [    3.970632] Code: ...
> 
> With this patch, I get:
> 
> [    4.211553] PANIC: double fault, error_code: 0x0
> ...
> [    4.213536] task: ffff88001aa18000 task.stack: ffff88001aa20000
> [    4.214059] RIP: 0010:do_error_trap+0x33/0x1c0
> [    4.214449] RSP: 0000:ffffffffff1b8f78 EFLAGS: 00010096
> [    4.214934] RAX: dffffc0000000000 RBX: ffffffffff1b8f90 RCX: 0000000000000006
> [    4.215554] RDX: ffffffff82048b20 RSI: 0000000000000000 RDI: ffffffffff1b9110
> [    4.216176] RBP: ffffffffff1b9088 R08: 0000000000000004 R09: 0000000000000000
> [    4.216793] R10: 0000000000000000 R11: fffffbffffe3723f R12: 0000000000000006
> [    4.217419] R13: 0000000000000000 R14: 0000000000000004 R15: 0000000000000000
> [    4.218046] FS:  0000000000000000(0000) GS:ffff88001ae00000(0000) knlGS:0000000000000000
> [    4.218775] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [    4.219280] CR2: ffffffffff1b8f68 CR3: 00000000193da002 CR4: 00000000003606f0
> [    4.219931] Call Trace:
> [    4.220156]  <SYSENTER>
> [    4.220383]  ? async_page_fault+0x36/0x60
> [    4.220768]  ? invalid_op+0x22/0x40
> [    4.221087]  ? async_page_fault+0x36/0x60
> [    4.221442]  ? sync_regs+0x3c/0x40
> [    4.221745]  ? sync_regs+0x2e/0x40
> [    4.222051]  ? error_entry+0x6c/0xd0
> [    4.222395]  ? async_page_fault+0x36/0x60
> [    4.222748]  </SYSENTER>
> [    4.223014] Code: ...

Please clean up those oopses: remove the timestamps, registers and the
offsets from the symbol names - they only clutter the text and have no
meaning.

> 
> Signed-off-by: Andy Lutomirski <luto@kernel.org>
> ---
>  arch/x86/include/asm/stacktrace.h |  3 +++
>  arch/x86/kernel/dumpstack.c       | 19 +++++++++++++++++++
>  arch/x86/kernel/dumpstack_32.c    |  6 ++++++
>  arch/x86/kernel/dumpstack_64.c    |  6 ++++++
>  4 files changed, 34 insertions(+)

With that:

Reviewed-by: Borislav Petkov <bp@suse.de>

-- 
Regards/Gruss,
    Boris.

SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
-- 

Re: WARNING: can't dereference registers at ffffc90004dfff60 for ip error_entry+0x7d/0xd0 (Re: [PATCH v2 00/18] Entry stack switching)

[Josh Poimboeuf]

On Wed, Nov 22, 2017 at 08:39:07AM +0100, Ingo Molnar wrote:
> 
> * Andy Lutomirski <luto@kernel.org> wrote:
> 
> > This sets up stack switching, including for SYSCALL.  I think it's
> > in decent shape.
> > 
> > Known issues:
> >  - I think we're going to want a way to turn the stack switching on and
> >    off either at boot time or at runtime.  It should be fairly straightforward
> >    to make it work.
> > 
> >  - I think the ORC unwinder isn't so good at dealing with stack overflows.
> >    It bails too early (I think), resulting in lots of ? entries.  This
> >    isn't a regression with this series -- it's just something that could
> >    be improved.
> 
> Note that with the attached config on an Intel testbox I get the following new ORC 
> unwinder warning during bootup:
> 
> [   12.200554] calling  ghash_pclmulqdqni_mod_init+0x0/0x54 @ 1
> [   12.209536] WARNING: can't dereference registers at ffffc90004dfff60 for ip error_entry+0x7d/0xd0
> [   12.231388] initcall ghash_pclmulqdqni_mod_init+0x0/0x54 returned 0 after 23480 usecs

After the stack switch in error_entry(), the pt_regs are at a different
offset than before, so they aren't where ORC expects them to be.

I think the below patch should fix it, by popping the return address off
the stack instead of just copying it.  This way we can avoid adding
another ORC annotation because pt_regs will be at the same offset both
before and after the sync_regs() call.


diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 2fdd2127e8e9..8dad83724469 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1291,8 +1291,8 @@ ENTRY(error_entry)
 
 .Lerror_entry_from_usermode_after_swapgs:
 	/* Put us onto the real thread stack. */
-	leaq	8(%rsp), %rdi			/* pt_regs pointer */
-	movq	(%rsp), %r12
+	popq	%r12				/* function return address */
+	leaq	(%rsp), %rdi			/* pt_regs pointer */
 	call	sync_regs
 	movq	%rax, %rsp			/* switch stack */
 	ENCODE_FRAME_POINTER

Re: WARNING: can't dereference registers at ffffc90004dfff60 for ip error_entry+0x7d/0xd0 (Re: [PATCH v2 00/18] Entry stack switching)

[Andy Lutomirski]

[-- Attachment #1: Type: text/plain, Size: 2469 bytes --]

On Wed, Nov 22, 2017 at 5:55 AM, Josh Poimboeuf <jpoimboe@redhat.com> wrote:
> On Wed, Nov 22, 2017 at 08:39:07AM +0100, Ingo Molnar wrote:
>>
>> * Andy Lutomirski <luto@kernel.org> wrote:
>>
>> > This sets up stack switching, including for SYSCALL.  I think it's
>> > in decent shape.
>> >
>> > Known issues:
>> >  - I think we're going to want a way to turn the stack switching on and
>> >    off either at boot time or at runtime.  It should be fairly straightforward
>> >    to make it work.
>> >
>> >  - I think the ORC unwinder isn't so good at dealing with stack overflows.
>> >    It bails too early (I think), resulting in lots of ? entries.  This
>> >    isn't a regression with this series -- it's just something that could
>> >    be improved.
>>
>> Note that with the attached config on an Intel testbox I get the following new ORC
>> unwinder warning during bootup:
>>
>> [   12.200554] calling  ghash_pclmulqdqni_mod_init+0x0/0x54 @ 1
>> [   12.209536] WARNING: can't dereference registers at ffffc90004dfff60 for ip error_entry+0x7d/0xd0
>> [   12.231388] initcall ghash_pclmulqdqni_mod_init+0x0/0x54 returned 0 after 23480 usecs
>
> After the stack switch in error_entry(), the pt_regs are at a different
> offset than before, so they aren't where ORC expects them to be.
>
> I think the below patch should fix it, by popping the return address off
> the stack instead of just copying it.  This way we can avoid adding
> another ORC annotation because pt_regs will be at the same offset both
> before and after the sync_regs() call.
>
>
> diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
> index 2fdd2127e8e9..8dad83724469 100644
> --- a/arch/x86/entry/entry_64.S
> +++ b/arch/x86/entry/entry_64.S
> @@ -1291,8 +1291,8 @@ ENTRY(error_entry)
>
>  .Lerror_entry_from_usermode_after_swapgs:
>         /* Put us onto the real thread stack. */
> -       leaq    8(%rsp), %rdi                   /* pt_regs pointer */
> -       movq    (%rsp), %r12
> +       popq    %r12                            /* function return address */
> +       leaq    (%rsp), %rdi                    /* pt_regs pointer */
>         call    sync_regs
>         movq    %rax, %rsp                      /* switch stack */
>         ENCODE_FRAME_POINTER

Ah, I see -- SAVE_C_REGS contains an UNWIND_HINT_REGS hint.  I had
thought I needed to fix it differently.

Ingo, if you want to apply this, I attached it.  I'll fold it in next
time I resend the whole  series.

[-- Attachment #2: 0001-Fixup-for-x86-asm-64-Use-a-percpu-trampoline-stack-f.patch --]
[-- Type: text/x-patch, Size: 1120 bytes --]

From e4b840c5a2eee3610d870703d484263226df80cc Mon Sep 17 00:00:00 2001
Message-Id: <e4b840c5a2eee3610d870703d484263226df80cc.1511363929.git.luto@kernel.org>
From: Andy Lutomirski <luto@kernel.org>
Date: Wed, 22 Nov 2017 07:15:51 -0800
Subject: [PATCH] Fixup for "x86/asm/64: Use a percpu trampoline stack for IDT
 entries"

One of my sync_regs calls was confusing objtool.  I'll fold this in
to the series next time I refresh it.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/entry/entry_64.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 2fdd2127e8e9..f1cef194dfba 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1291,8 +1291,8 @@ ENTRY(error_entry)
 
 .Lerror_entry_from_usermode_after_swapgs:
 	/* Put us onto the real thread stack. */
-	leaq	8(%rsp), %rdi			/* pt_regs pointer */
-	movq	(%rsp), %r12
+	popq	%r12				/* save return addr in %12 */
+	movq	%rsp, %rdi			/* arg0 = pt_regs pointer */
 	call	sync_regs
 	movq	%rax, %rsp			/* switch stack */
 	ENCODE_FRAME_POINTER
-- 
2.13.6

Re: [PATCH v2 06/18] x86/kasan/64: Teach KASAN about the cpu_entry_area

[Andy Lutomirski]

On Wed, Nov 22, 2017 at 1:05 AM, Andrey Ryabinin
<aryabinin@virtuozzo.com> wrote:
>
>
> On 11/22/2017 07:44 AM, Andy Lutomirski wrote:
>> The cpu_entry_area will contain stacks.  Make sure that KASAN has
>> appropriate shadow mappings for them.
>>
>> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
>> Cc: Alexander Potapenko <glider@google.com>
>> Cc: Dmitry Vyukov <dvyukov@google.com>
>> Cc: kasan-dev@googlegroups.com
>> Signed-off-by: Andy Lutomirski <luto@kernel.org>
>> ---
>>  arch/x86/mm/kasan_init_64.c | 9 ++++++++-
>>  1 file changed, 8 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
>> index 99dfed6dfef8..43d376687315 100644
>> --- a/arch/x86/mm/kasan_init_64.c
>> +++ b/arch/x86/mm/kasan_init_64.c
>> @@ -330,7 +330,14 @@ void __init kasan_init(void)
>>                             early_pfn_to_nid(__pa(_stext)));
>>
>>       kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)MODULES_END),
>> -                     (void *)KASAN_SHADOW_END);
>> +                                kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM))));
>> +
>> +     kasan_populate_shadow((unsigned long)kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM))),
>> +                           (unsigned long)kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_TOP) + PAGE_SIZE)),
>
> What's '+ PAGE_SIZE' for?
>

__fix_to_virt(..._TOP) returns the address of the *bottom* of the last
cpu_entry_area page.  +PAGE_SIZE returns one past the end of the
region, which I assume is the correct thing to pass.

Re: [PATCH v2 04/18] x86/gdt: Put per-cpu GDT remaps in ascending order

[Andy Lutomirski]

On Wed, Nov 22, 2017 at 3:05 AM, Borislav Petkov <bp@suse.de> wrote:
> On Tue, Nov 21, 2017 at 08:43:59PM -0800, Andy Lutomirski wrote:
>> We currently have CPU 0's GDT at the top of the GDT range and
>> higher-numbered CPUs at lower addreses.  This happens because the
>> fixmap is upside down (index 0 is the top of the fixmap).
>>
>> Flip it so that GDTs are in ascending order by virtual address.
>> This will simplify a future patch that will generalize the GDT
>> remap to contain multiple pages.
>>
>> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
>> Signed-off-by: Andy Lutomirski <luto@kernel.org>
>> ---
>>  arch/x86/include/asm/desc.h | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> Same reply as before:
>
> https://lkml.kernel.org/r/20171121171643.jtwbfuvxwi6wecj3@pd.tnic
>

Oops.  Got it this time.

Re: [PATCH v2 05/18] x86/fixmap: Generalize the GDT fixmap mechanism

[Borislav Petkov]

On Tue, Nov 21, 2017 at 08:44:00PM -0800, Andy Lutomirski wrote:
> Currently, the GDT is an ad-hoc array of pages, one per CPU, in the
> fixmap.  Generalize it to be an array of a new struct cpu_entry_area
> so that we can cleanly add new things to it.
> 
> Signed-off-by: Andy Lutomirski <luto@kernel.org>
> ---
>  arch/x86/include/asm/desc.h   |  9 +--------
>  arch/x86/include/asm/fixmap.h | 36 ++++++++++++++++++++++++++++++++++--
>  arch/x86/kernel/cpu/common.c  | 14 +++++++-------
>  arch/x86/xen/mmu_pv.c         |  2 +-
>  4 files changed, 43 insertions(+), 18 deletions(-)
> 
> diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
> index 95cd95eb7285..194ffab00ebe 100644
> --- a/arch/x86/include/asm/desc.h
> +++ b/arch/x86/include/asm/desc.h
> @@ -60,17 +60,10 @@ static inline struct desc_struct *get_current_gdt_rw(void)
>  	return this_cpu_ptr(&gdt_page)->gdt;
>  }
>  
> -/* Get the fixmap index for a specific processor */
> -static inline unsigned int get_cpu_gdt_ro_index(int cpu)
> -{
> -	return FIX_GDT_REMAP_END - cpu;
> -}
> -
>  /* Provide the fixmap address of the remapped GDT */
>  static inline struct desc_struct *get_cpu_gdt_ro(int cpu)
>  {
> -	unsigned int idx = get_cpu_gdt_ro_index(cpu);
> -	return (struct desc_struct *)__fix_to_virt(idx);
> +	return (struct desc_struct *)&get_cpu_entry_area(cpu)->gdt;
>  }
>  
>  /* Provide the current read-only GDT */
> diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
> index b0c505fe9a95..038b8474c7f8 100644
> --- a/arch/x86/include/asm/fixmap.h
> +++ b/arch/x86/include/asm/fixmap.h

Btw, the whole cpu_entry_area machinery looks like it should belong more
in asm/processor.h and not in fixmap.h

> @@ -44,6 +44,17 @@ extern unsigned long __FIXADDR_TOP;
>  			 PAGE_SIZE)
>  #endif
>  
> +/*
> + * cpu_entry_area is a percpu region in the fixmap that contains things
> + * needed by the CPU and early entry/exit code.  Real types aren't used
> + * for all fields here to about circular header dependencies.

s/about/avoid/

> + */
> +struct cpu_entry_area
> +{

ERROR: open brace '{' following struct go on the same line
#67: FILE: arch/x86/include/asm/fixmap.h:53:
+struct cpu_entry_area
+{

> +	char gdt[PAGE_SIZE];
> +};
> +
> +#define CPU_ENTRY_AREA_PAGES (sizeof(struct cpu_entry_area) / PAGE_SIZE)
>  
>  /*
>   * Here we define all the compile-time 'special' virtual
> @@ -101,8 +112,8 @@ enum fixed_addresses {
>  	FIX_LNW_VRTC,
>  #endif
>  	/* Fixmap entries to remap the GDTs, one per processor. */
> -	FIX_GDT_REMAP_BEGIN,
> -	FIX_GDT_REMAP_END = FIX_GDT_REMAP_BEGIN + NR_CPUS - 1,
> +	FIX_CPU_ENTRY_AREA_TOP,
> +	FIX_CPU_ENTRY_AREA_BOTTOM = FIX_CPU_ENTRY_AREA_TOP + (CPU_ENTRY_AREA_PAGES * NR_CPUS) - 1,
>  
>  #ifdef CONFIG_ACPI_APEI_GHES
>  	/* Used for GHES mapping from assorted contexts */
> @@ -191,5 +202,26 @@ void __init *early_memremap_decrypted_wp(resource_size_t phys_addr,
>  void __early_set_fixmap(enum fixed_addresses idx,
>  			phys_addr_t phys, pgprot_t flags);
>  
> +static inline unsigned int __get_cpu_entry_area_page_index(int cpu, int page)
> +{
> +	BUILD_BUG_ON(sizeof(struct cpu_entry_area) % PAGE_SIZE != 0);

	BUILD_BUG_ON(sizeof(struct cpu_entry_area) % PAGE_SIZE);

> +
> +	return FIX_CPU_ENTRY_AREA_BOTTOM - cpu*CPU_ENTRY_AREA_PAGES - page;
> +}
> +
> +#define __get_cpu_entry_area_offset_index(cpu, offset) ({		\
> +	BUILD_BUG_ON(offset % PAGE_SIZE != 0);				\

	BUILD_BUG_ON(offset % PAGE_SIZE);

> +	__get_cpu_entry_area_page_index(cpu, offset / PAGE_SIZE);	\
> +	})
> +
> +#define get_cpu_entry_area_index(cpu, field)				\
> +	__get_cpu_entry_area_offset_index((cpu), offsetof(struct cpu_entry_area, field))
> +
> +static inline struct cpu_entry_area *get_cpu_entry_area(int cpu)
> +{
> +	return (struct cpu_entry_area *)
> +		__fix_to_virt(__get_cpu_entry_area_page_index(cpu, 0));

Just let it stick out.

-- 
Regards/Gruss,
    Boris.

SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
-- 

Re: WARNING: can't dereference registers at ffffc90004dfff60 for ip error_entry+0x7d/0xd0 (Re: [PATCH v2 00/18] Entry stack switching)

[Ingo Molnar]

* Andy Lutomirski <luto@kernel.org> wrote:

> >  .Lerror_entry_from_usermode_after_swapgs:
> >         /* Put us onto the real thread stack. */
> > -       leaq    8(%rsp), %rdi                   /* pt_regs pointer */
> > -       movq    (%rsp), %r12
> > +       popq    %r12                            /* function return address */
> > +       leaq    (%rsp), %rdi                    /* pt_regs pointer */
> >         call    sync_regs
> >         movq    %rax, %rsp                      /* switch stack */
> >         ENCODE_FRAME_POINTER
> 
> Ah, I see -- SAVE_C_REGS contains an UNWIND_HINT_REGS hint.  I had
> thought I needed to fix it differently.
> 
> Ingo, if you want to apply this, I attached it.  I'll fold it in next
> time I resend the whole  series.

Ok.

Also please fold back the minor fixes below - spelling fix plus ugly line breaks 
elimination.

Thanks,

	Ingo

=======>

 arch/x86/include/asm/fixmap.h | 2 +-
 arch/x86/kernel/cpu/common.c  | 7 ++-----
 arch/x86/kernel/dumpstack.c   | 6 ++----
 arch/x86/kernel/traps.c       | 3 +--
 4 files changed, 6 insertions(+), 12 deletions(-)

diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index a40820216f66..8562356213cd 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -54,7 +54,7 @@ struct cpu_entry_area
 	char gdt[PAGE_SIZE];
 
 	/*
-	 * The gdt is just below cpu_tss and thus serves (on x86_64) as a
+	 * The GDT is just below cpu_tss and thus serves (on x86_64) as a
 	 * a read-only guard page for the SYSENTER stack at the bottom
 	 * of the TSS region.
 	 */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 3c0b69a6792b..6b949e6ea0f9 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -490,14 +490,12 @@ void load_percpu_segment(int cpu)
 	load_stack_canary_segment();
 }
 
-static void set_percpu_fixmap_pages(int fixmap_index, void *ptr, int pages,
-				    pgprot_t prot)
+static void set_percpu_fixmap_pages(int fixmap_index, void *ptr, int pages, pgprot_t prot)
 {
 	int i;
 
 	for (i = 0; i < pages; i++)
-		__set_fixmap(fixmap_index - i,
-			     per_cpu_ptr_to_phys(ptr + i*PAGE_SIZE), prot);
+		__set_fixmap(fixmap_index - i, per_cpu_ptr_to_phys(ptr + i*PAGE_SIZE), prot);
 }
 
 #ifdef CONFIG_X86_32
@@ -546,7 +544,6 @@ static inline void setup_cpu_entry_area(int cpu)
 	__set_fixmap(get_cpu_entry_area_index(cpu, gdt), get_cpu_gdt_paddr(cpu), gdt_prot);
 
 	/*
-	 *
 	 * The Intel SDM says (Volume 3, 7.2.1):
 	 *
 	 *  Avoid placing a page boundary in the part of the TSS that the
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index def64a91bd68..e9e70bce52ec 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -109,10 +109,8 @@ void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
 			 * See if the next page up is valid to that we can
 			 * generate some kind of backtrace if this happens.
 			 */
-			stack = (unsigned long *)
-				PAGE_ALIGN((unsigned long)stack);
-			if (get_stack_info(stack, task, &stack_info,
-					   &visit_mask))
+			stack = (unsigned long *)PAGE_ALIGN((unsigned long)stack);
+			if (get_stack_info(stack, task, &stack_info, &visit_mask))
 				break;
 		}
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 03f2bc1cbb30..cbc4272bb9dd 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -359,8 +359,7 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
 		regs->cs == __KERNEL_CS &&
 		regs->ip == (unsigned long)native_irq_return_iret)
 	{
-		struct pt_regs *normal_regs =
-			(struct pt_regs *)this_cpu_read(cpu_tss.x86_tss.sp0) - 1;
+		struct pt_regs *normal_regs = (struct pt_regs *)this_cpu_read(cpu_tss.x86_tss.sp0) - 1;
 
 		/* Fake a #GP(0) from userspace. */
 		memmove(&normal_regs->ip, (void *)regs->sp, 5*8);

Re: [PATCH v2 00/18] Entry stack switching

[Andy Lutomirski]

On Tue, Nov 21, 2017 at 10:22 PM, Ingo Molnar <mingo@kernel.org> wrote:
>
> * Andy Lutomirski <luto@kernel.org> wrote:
>
>> This sets up stack switching, including for SYSCALL.  I think it's
>> in decent shape.
>>
>> Known issues:
>>  - I think we're going to want a way to turn the stack switching on and
>>    off either at boot time or at runtime.  It should be fairly straightforward
>>    to make it work.
>>
>>  - I think the ORC unwinder isn't so good at dealing with stack overflows.
>>    It bails too early (I think), resulting in lots of ? entries.  This
>>    isn't a regression with this series -- it's just something that could
>>    be improved.
>>
>> Ingo, patch 1 may be tip/urgent material.  It fixes what I think is
>> a bug in Xen.  I'm having a hard time testing because it's being
>> masked by a bigger unrelated bug that's keeping Xen from booting
>> when configured to hit the bug I'm fixing.  (The latter bug goes at
>> least back to v4.13, I think I know roughtly what's wrong, and I've
>> reported it to the maintainers.)
>
> Hm, with this series the previous IRQ vector bug appears again:
>
> [   51.156370] do_IRQ: 16.34 No irq handler for vector
> [   57.511030] do_IRQ: 16.34 No irq handler for vector
> [   57.528335] do_IRQ: 16.34 No irq handler for vector
> [   57.533256] do_IRQ: 16.34 No irq handler for vector
> [   63.991913] do_IRQ: 16.34 No irq handler for vector
> [   63.996810] do_IRQ: 16.34 No irq handler for vector
>
> I've attached the reproducer config. Note that the system appears to be working to
> a certain extent (I could ssh to it and extract its config), but produces these
> warnings sporadically.

I'll try to reproduce this, but this is weird.  This is vector 34,
which is, or could be, a genuine IRQ vector.  The only way I can think
of that my series would have caused this is if I very severely broke
common_interrupt, but I don't see how that could have happened without
breaking everything.  It's also weird that you're seeing this only on
CPU 16.  Maybe it's worth adding a WARN_ON to that warning to get a
stack trace just in case.

Thomas, any insight here?

> but don't get the IRQ vector warnings.

Ingo, are you saying that you only get the IRQ vector warnings with
the SYSCALL hwframe fix applied?  That's bizarre.

Anyway, I booted your config (more or less -- I munged it through
virtme-configkernel --update first) with 17 vCPUs and it seems fine.
Is the issue reliable enough to bisect?

Re: WARNING: can't dereference registers at ffffc90004dfff60 for ip error_entry+0x7d/0xd0 (Re: [PATCH v2 00/18] Entry stack switching)

[Andy Lutomirski]

On Wed, Nov 22, 2017 at 7:56 AM, Ingo Molnar <mingo@kernel.org> wrote:
>
> * Andy Lutomirski <luto@kernel.org> wrote:
>
>> >  .Lerror_entry_from_usermode_after_swapgs:
>> >         /* Put us onto the real thread stack. */
>> > -       leaq    8(%rsp), %rdi                   /* pt_regs pointer */
>> > -       movq    (%rsp), %r12
>> > +       popq    %r12                            /* function return address */
>> > +       leaq    (%rsp), %rdi                    /* pt_regs pointer */
>> >         call    sync_regs
>> >         movq    %rax, %rsp                      /* switch stack */
>> >         ENCODE_FRAME_POINTER
>>
>> Ah, I see -- SAVE_C_REGS contains an UNWIND_HINT_REGS hint.  I had
>> thought I needed to fix it differently.
>>
>> Ingo, if you want to apply this, I attached it.  I'll fold it in next
>> time I resend the whole  series.
>
> Ok.
>
> Also please fold back the minor fixes below - spelling fix plus ugly line breaks
> elimination.

Done.

Re: [PATCH v2 05/18] x86/fixmap: Generalize the GDT fixmap mechanism

[Andy Lutomirski]

On Wed, Nov 22, 2017 at 7:33 AM, Borislav Petkov <bp@suse.de> wrote:
> On Tue, Nov 21, 2017 at 08:44:00PM -0800, Andy Lutomirski wrote:
>> Currently, the GDT is an ad-hoc array of pages, one per CPU, in the
>> fixmap.  Generalize it to be an array of a new struct cpu_entry_area
>> so that we can cleanly add new things to it.
>>
>> Signed-off-by: Andy Lutomirski <luto@kernel.org>
>> ---
>>  arch/x86/include/asm/desc.h   |  9 +--------
>>  arch/x86/include/asm/fixmap.h | 36 ++++++++++++++++++++++++++++++++++--
>>  arch/x86/kernel/cpu/common.c  | 14 +++++++-------
>>  arch/x86/xen/mmu_pv.c         |  2 +-
>>  4 files changed, 43 insertions(+), 18 deletions(-)
>>
>> diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
>> index 95cd95eb7285..194ffab00ebe 100644
>> --- a/arch/x86/include/asm/desc.h
>> +++ b/arch/x86/include/asm/desc.h
>> @@ -60,17 +60,10 @@ static inline struct desc_struct *get_current_gdt_rw(void)
>>       return this_cpu_ptr(&gdt_page)->gdt;
>>  }
>>
>> -/* Get the fixmap index for a specific processor */
>> -static inline unsigned int get_cpu_gdt_ro_index(int cpu)
>> -{
>> -     return FIX_GDT_REMAP_END - cpu;
>> -}
>> -
>>  /* Provide the fixmap address of the remapped GDT */
>>  static inline struct desc_struct *get_cpu_gdt_ro(int cpu)
>>  {
>> -     unsigned int idx = get_cpu_gdt_ro_index(cpu);
>> -     return (struct desc_struct *)__fix_to_virt(idx);
>> +     return (struct desc_struct *)&get_cpu_entry_area(cpu)->gdt;
>>  }
>>
>>  /* Provide the current read-only GDT */
>> diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
>> index b0c505fe9a95..038b8474c7f8 100644
>> --- a/arch/x86/include/asm/fixmap.h
>> +++ b/arch/x86/include/asm/fixmap.h
>
> Btw, the whole cpu_entry_area machinery looks like it should belong more
> in asm/processor.h and not in fixmap.h

Agreed, except that the fixmap enum needs to know
sizeof(cpu_entry_area), and I'm really hesitant to add yet another
header dependency.

>
>> @@ -44,6 +44,17 @@ extern unsigned long __FIXADDR_TOP;
>>                        PAGE_SIZE)
>>  #endif
>>
>> +/*
>> + * cpu_entry_area is a percpu region in the fixmap that contains things
>> + * needed by the CPU and early entry/exit code.  Real types aren't used
>> + * for all fields here to about circular header dependencies.
>
> s/about/avoid/
>
>> + */
>> +struct cpu_entry_area
>> +{
>
> ERROR: open brace '{' following struct go on the same line
> #67: FILE: arch/x86/include/asm/fixmap.h:53:
> +struct cpu_entry_area
> +{
>
>> +     char gdt[PAGE_SIZE];
>> +};
>> +
>> +#define CPU_ENTRY_AREA_PAGES (sizeof(struct cpu_entry_area) / PAGE_SIZE)
>>
>>  /*
>>   * Here we define all the compile-time 'special' virtual
>> @@ -101,8 +112,8 @@ enum fixed_addresses {
>>       FIX_LNW_VRTC,
>>  #endif
>>       /* Fixmap entries to remap the GDTs, one per processor. */
>> -     FIX_GDT_REMAP_BEGIN,
>> -     FIX_GDT_REMAP_END = FIX_GDT_REMAP_BEGIN + NR_CPUS - 1,
>> +     FIX_CPU_ENTRY_AREA_TOP,
>> +     FIX_CPU_ENTRY_AREA_BOTTOM = FIX_CPU_ENTRY_AREA_TOP + (CPU_ENTRY_AREA_PAGES * NR_CPUS) - 1,
>>
>>  #ifdef CONFIG_ACPI_APEI_GHES
>>       /* Used for GHES mapping from assorted contexts */
>> @@ -191,5 +202,26 @@ void __init *early_memremap_decrypted_wp(resource_size_t phys_addr,
>>  void __early_set_fixmap(enum fixed_addresses idx,
>>                       phys_addr_t phys, pgprot_t flags);
>>
>> +static inline unsigned int __get_cpu_entry_area_page_index(int cpu, int page)
>> +{
>> +     BUILD_BUG_ON(sizeof(struct cpu_entry_area) % PAGE_SIZE != 0);
>
>         BUILD_BUG_ON(sizeof(struct cpu_entry_area) % PAGE_SIZE);
>

My general habit is that I like the != 0 here because I'm doing
arithmetic rather than thinking of % as some kind of logical operator.
I.e. I find it easier to understand the way I wrote it.

>> +
>> +     return FIX_CPU_ENTRY_AREA_BOTTOM - cpu*CPU_ENTRY_AREA_PAGES - page;
>> +}
>> +
>> +#define __get_cpu_entry_area_offset_index(cpu, offset) ({            \
>> +     BUILD_BUG_ON(offset % PAGE_SIZE != 0);                          \
>
>         BUILD_BUG_ON(offset % PAGE_SIZE);

Ditto.

>
>> +     __get_cpu_entry_area_page_index(cpu, offset / PAGE_SIZE);       \
>> +     })
>> +
>> +#define get_cpu_entry_area_index(cpu, field)                         \
>> +     __get_cpu_entry_area_offset_index((cpu), offsetof(struct cpu_entry_area, field))
>> +
>> +static inline struct cpu_entry_area *get_cpu_entry_area(int cpu)
>> +{
>> +     return (struct cpu_entry_area *)
>> +             __fix_to_virt(__get_cpu_entry_area_page_index(cpu, 0));
>
> Just let it stick out.

Sure.

>
> --
> Regards/Gruss,
>     Boris.
>
> SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
> --

Re: [PATCH v2 05/18] x86/fixmap: Generalize the GDT fixmap mechanism

[Borislav Petkov]

On Wed, Nov 22, 2017 at 09:16:00AM -0800, Andy Lutomirski wrote:
> Agreed, except that the fixmap enum needs to know
> sizeof(cpu_entry_area), and I'm really hesitant to add yet another
> header dependency.

Perhaps a separate asm/cpuarea.h. asm/cpu.h looks small enough but it
has hotplug and other misc stuff in there.

Bah, our header separation needs a serious cleanup. ;-\

> My general habit is that I like the != 0 here because I'm doing
> arithmetic rather than thinking of % as some kind of logical operator.
> I.e. I find it easier to understand the way I wrote it.

I know, and I can recognize the code you wrote in arch/x86/ just by
those tests, without looking at git blame output. :-)

In my case, without the != 0 reads easier.

-- 
Regards/Gruss,
    Boris.

SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
-- 

Re: [PATCH v2 07/18] x86/asm: Fix assumptions that the HW TSS is at the beginning of cpu_tss

[Borislav Petkov]

On Tue, Nov 21, 2017 at 08:44:02PM -0800, Andy Lutomirski wrote:
> I'm going to move SYSENTER_stack to the beginning of cpu_tss to help
> detect overflow.  Before this can happen, I need to fix several code
> paths that hardcode assumptions about the old layout.

Please formulate that commit message in passive-impersonal: "Fix
hardcoded assumptions about ... before ..."

> 
> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
> Signed-off-by: Andy Lutomirski <luto@kernel.org>
> ---
>  arch/x86/include/asm/desc.h      |  2 +-
>  arch/x86/include/asm/processor.h |  4 ++--
>  arch/x86/kernel/cpu/common.c     |  8 ++++----
>  arch/x86/kernel/doublefault.c    | 36 +++++++++++++++++-------------------
>  arch/x86/power/cpu.c             | 13 +++++++------
>  5 files changed, 31 insertions(+), 32 deletions(-)

With that:

Reviewed-by: Borislav Petkov <bp@suse.de>

-- 
Regards/Gruss,
    Boris.

SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
-- 

Re: [PATCH v2 00/18] Entry stack switching

[Ingo Molnar]

* Andy Lutomirski <luto@kernel.org> wrote:

> On Tue, Nov 21, 2017 at 10:22 PM, Ingo Molnar <mingo@kernel.org> wrote:
> >
> > * Andy Lutomirski <luto@kernel.org> wrote:
> >
> >> This sets up stack switching, including for SYSCALL.  I think it's
> >> in decent shape.
> >>
> >> Known issues:
> >>  - I think we're going to want a way to turn the stack switching on and
> >>    off either at boot time or at runtime.  It should be fairly straightforward
> >>    to make it work.
> >>
> >>  - I think the ORC unwinder isn't so good at dealing with stack overflows.
> >>    It bails too early (I think), resulting in lots of ? entries.  This
> >>    isn't a regression with this series -- it's just something that could
> >>    be improved.
> >>
> >> Ingo, patch 1 may be tip/urgent material.  It fixes what I think is
> >> a bug in Xen.  I'm having a hard time testing because it's being
> >> masked by a bigger unrelated bug that's keeping Xen from booting
> >> when configured to hit the bug I'm fixing.  (The latter bug goes at
> >> least back to v4.13, I think I know roughtly what's wrong, and I've
> >> reported it to the maintainers.)
> >
> > Hm, with this series the previous IRQ vector bug appears again:
> >
> > [   51.156370] do_IRQ: 16.34 No irq handler for vector
> > [   57.511030] do_IRQ: 16.34 No irq handler for vector
> > [   57.528335] do_IRQ: 16.34 No irq handler for vector
> > [   57.533256] do_IRQ: 16.34 No irq handler for vector
> > [   63.991913] do_IRQ: 16.34 No irq handler for vector
> > [   63.996810] do_IRQ: 16.34 No irq handler for vector
> >
> > I've attached the reproducer config. Note that the system appears to be working to
> > a certain extent (I could ssh to it and extract its config), but produces these
> > warnings sporadically.
> 
> I'll try to reproduce this, but this is weird.  This is vector 34,
> which is, or could be, a genuine IRQ vector.  The only way I can think
> of that my series would have caused this is if I very severely broke
> common_interrupt, but I don't see how that could have happened without
> breaking everything.  It's also weird that you're seeing this only on
> CPU 16.  Maybe it's worth adding a WARN_ON to that warning to get a
> stack trace just in case.
> 
> Thomas, any insight here?
> 
> > but don't get the IRQ vector warnings.
> 
> Ingo, are you saying that you only get the IRQ vector warnings with
> the SYSCALL hwframe fix applied?  That's bizarre.

Correct. I assume it's because lockdep is working fine with that fix applied,
but that also means that different irq-tracing code paths are taken.

The lockdep error disables lockdep globally and immediately.

> Anyway, I booted your config (more or less -- I munged it through
> virtme-configkernel --update first) with 17 vCPUs and it seems fine.
> Is the issue reliable enough to bisect?

Ok, it should be bisectable, will try to bisect it.

I think it's a key aspect that the CPU is AMD - a similar config on Intel seems to 
be working fine (modulo the unwinder warning).

Thanks,

	Ingo

Re: [PATCH v2 00/18] Entry stack switching

[Ingo Molnar]

* Ingo Molnar <mingo@kernel.org> wrote:

> > Anyway, I booted your config (more or less -- I munged it through
> > virtme-configkernel --update first) with 17 vCPUs and it seems fine.
> > Is the issue reliable enough to bisect?
> 
> Ok, it should be bisectable, will try to bisect it.

The latestest entry-stack code appears to be working fine though.

So one of the below fixes from yesterday appears to have done the trick.

I'll re-test today to make sure: maybe it's more sporadic than I thought, in one 
of the bootups I got the do_IRQ warning only once, in half a day of uptime.

Thanks,

	Ingo

=================>

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index f1cef194dfba..3d404f8d0443 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -51,15 +51,19 @@ ENTRY(native_usergs_sysret64)
 END(native_usergs_sysret64)
 #endif /* CONFIG_PARAVIRT */
 
-.macro TRACE_IRQS_IRETQ
+.macro TRACE_IRQS_FLAGS flags:req
 #ifdef CONFIG_TRACE_IRQFLAGS
-	bt	$9, EFLAGS(%rsp)		/* interrupts off? */
+	bt	$9, \flags		/* interrupts off? */
 	jnc	1f
 	TRACE_IRQS_ON
 1:
 #endif
 .endm
 
+.macro TRACE_IRQS_IRETQ
+	TRACE_IRQS_FLAGS EFLAGS(%rsp)
+.endm
+
 /*
  * When dynamic function tracer is enabled it will add a breakpoint
  * to all locations that it is about to modify, sync CPUs, update
@@ -1069,11 +1073,13 @@ ENTRY(native_load_gs_index)
 	FRAME_BEGIN
 	pushfq
 	DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
+	TRACE_IRQS_OFF
 	SWAPGS
 .Lgs_change:
 	movl	%edi, %gs
 2:	ALTERNATIVE "", "mfence", X86_BUG_SWAPGS_FENCE
 	SWAPGS
+	TRACE_IRQS_FLAGS (%rsp)
 	popfq
 	FRAME_END
 	ret
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 8562356213cd..15cf010225c9 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -47,10 +47,9 @@ extern unsigned long __FIXADDR_TOP;
 /*
  * cpu_entry_area is a percpu region in the fixmap that contains things
  * needed by the CPU and early entry/exit code.  Real types aren't used
- * for all fields here to about circular header dependencies.
+ * for all fields here to avoid circular header dependencies.
  */
-struct cpu_entry_area
-{
+struct cpu_entry_area {
 	char gdt[PAGE_SIZE];
 
 	/*
@@ -232,8 +231,7 @@ static inline unsigned int __get_cpu_entry_area_page_index(int cpu, int page)
 
 static inline struct cpu_entry_area *get_cpu_entry_area(int cpu)
 {
-	return (struct cpu_entry_area *)
-		__fix_to_virt(__get_cpu_entry_area_page_index(cpu, 0));
+	return (struct cpu_entry_area *)__fix_to_virt(__get_cpu_entry_area_page_index(cpu, 0));
 }
 
 #endif /* !__ASSEMBLY__ */

Re: [PATCH v2 00/18] Entry stack switching

[Ingo Molnar]

* Ingo Molnar <mingo@kernel.org> wrote:

> 
> * Ingo Molnar <mingo@kernel.org> wrote:
> 
> > > Anyway, I booted your config (more or less -- I munged it through
> > > virtme-configkernel --update first) with 17 vCPUs and it seems fine.
> > > Is the issue reliable enough to bisect?
> > 
> > Ok, it should be bisectable, will try to bisect it.
> 
> The latestest entry-stack code appears to be working fine though.
> 
> So one of the below fixes from yesterday appears to have done the trick.
> 
> I'll re-test today to make sure: maybe it's more sporadic than I thought, in one 
> of the bootups I got the do_IRQ warning only once, in half a day of uptime.

I re-tested and it all seems fine now. I suspect it got fixed by:

  ca37e57bbe0c: x86/entry/64: Add missing irqflags tracing to native_load_gs_index()

still it is weird, because I boot that system with latest -tip on a daily basis, 
and don't remember having seen that warning.

Do you have any theory for why the entry stack changes would uncover this bug?

Thanks,

	Ingo

Re: [PATCH v2 06/18] x86/kasan/64: Teach KASAN about the cpu_entry_area

[Andrey Ryabinin]

On 11/22/2017 06:22 PM, Andy Lutomirski wrote:
> On Wed, Nov 22, 2017 at 1:05 AM, Andrey Ryabinin
> <aryabinin@virtuozzo.com> wrote:
>>
>>
>> On 11/22/2017 07:44 AM, Andy Lutomirski wrote:
>>> The cpu_entry_area will contain stacks.  Make sure that KASAN has
>>> appropriate shadow mappings for them.
>>>
>>> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
>>> Cc: Alexander Potapenko <glider@google.com>
>>> Cc: Dmitry Vyukov <dvyukov@google.com>
>>> Cc: kasan-dev@googlegroups.com
>>> Signed-off-by: Andy Lutomirski <luto@kernel.org>
>>> ---
>>>  arch/x86/mm/kasan_init_64.c | 9 ++++++++-
>>>  1 file changed, 8 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
>>> index 99dfed6dfef8..43d376687315 100644
>>> --- a/arch/x86/mm/kasan_init_64.c
>>> +++ b/arch/x86/mm/kasan_init_64.c
>>> @@ -330,7 +330,14 @@ void __init kasan_init(void)
>>>                             early_pfn_to_nid(__pa(_stext)));
>>>
>>>       kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)MODULES_END),
>>> -                     (void *)KASAN_SHADOW_END);
>>> +                                kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM))));
>>> +
>>> +     kasan_populate_shadow((unsigned long)kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM))),
>>> +                           (unsigned long)kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_TOP) + PAGE_SIZE)),
>>
>> What's '+ PAGE_SIZE' for?
>>
> 
> __fix_to_virt(..._TOP) returns the address of the *bottom* of the last
> cpu_entry_area page.  +PAGE_SIZE returns one past the end of the
> region, which I assume is the correct thing to pass.
> 

Right.

Perhaps, it would be better to use variables, just avoid such awfully long lines, I mean like this:
	fixmap_shadow_start = (void *)__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM);
	fixmap_shadow_start = kasan_mem_to_shadow(fixmap_shadow_start);

	fixmap_shadow_end = (void *)__fix_to_virt(FIX_CPU_ENTRY_AREA_TOP) + PAGE_SIZE;
	fixmap_shadow_end = kasan_mem_to_shadow(fixmap_shadow_end);

	kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)MODULES_END),
				   fixmap_shadow_start);

	kasan_populate_shadow((unsigned long)fixmap_shadow_start,
			(unsigned long)fixmap_shadow_end,
			0);

I'm also thinking that we should change kasan_populate_shadow() to take void* instead of 'unsigned long'
to avoid those casts.

Re: [PATCH v2 08/18] x86/dumpstack: Handle stack overflow on all stacks

[Borislav Petkov]

On Tue, Nov 21, 2017 at 08:44:03PM -0800, Andy Lutomirski wrote:
> We currently special-case stack overflow on the task stack.  We're
> going to start putting special stacks in the fixmap with a custom
> layout, so they'll have guard pages, too.  Teach the unwinder to be
> able to unwind an overflow of any of the stacks.
> 
> Signed-off-by: Andy Lutomirski <luto@kernel.org>
> ---
>  arch/x86/kernel/dumpstack.c | 26 ++++++++++++++++----------
>  1 file changed, 16 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
> index 5e7d10e8ca25..635dcbfe2398 100644
> --- a/arch/x86/kernel/dumpstack.c
> +++ b/arch/x86/kernel/dumpstack.c
> @@ -90,24 +90,30 @@ void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
>  	 * - task stack
>  	 * - interrupt stack
>  	 * - HW exception stacks (double fault, nmi, debug, mce)
> +	 * - SYSENTER stack
>  	 *
> -	 * x86-32 can have up to three stacks:
> +	 * x86-32 can have up to four stacks:
>  	 * - task stack
>  	 * - softirq stack
>  	 * - hardirq stack
> +	 * - SYSENTER stack
>  	 */
>  	for (regs = NULL; stack; stack = PTR_ALIGN(stack_info.next_sp, sizeof(long))) {
>  		const char *stack_name;
>  
> -		/*
> -		 * If we overflowed the task stack into a guard page, jump back
> -		 * to the bottom of the usable stack.
> -		 */
> -		if (task_stack_page(task) - (void *)stack < PAGE_SIZE)
> -			stack = task_stack_page(task);
> -
> -		if (get_stack_info(stack, task, &stack_info, &visit_mask))
> -			break;
> +		if (get_stack_info(stack, task, &stack_info, &visit_mask)) {
> +			/*
> +			 * We weren't on a valid stack.  It's possible that
> +			 * we overflowed a valid stack into a guard page.
> +			 * See if the next page up is valid to that we can

s/to/so/

> +			 * generate some kind of backtrace if this happens.
> +			 */
> +			stack = (unsigned long *)
> +				PAGE_ALIGN((unsigned long)stack);
> +			if (get_stack_info(stack, task, &stack_info,
> +					   &visit_mask))

Yeah, let them stick out.

With that:

Reviewed-by: Borislav Petkov <bp@suse.de>

-- 
Regards/Gruss,
    Boris.

SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
-- 

Re: [PATCH v2 09/18] x86/asm: Move SYSENTER_stack to the beginning of struct tss_struct

[Borislav Petkov]

On Tue, Nov 21, 2017 at 08:44:04PM -0800, Andy Lutomirski wrote:
> I want SYSENTER_stack to have reliable overflow detection, which
> means that it needs to be at the bottom of a page, not the top.

Passive-impersonal tone pls.

> Move it to the beginning of struct tss_struct and page-align it.
> 
> Also add an assertion to make sure that the fixed hardware TSS
> doesn't cross a page boundary.
> 
> Signed-off-by: Andy Lutomirski <luto@kernel.org>
> ---
>  arch/x86/include/asm/processor.h | 21 ++++++++++++---------
>  arch/x86/kernel/cpu/common.c     | 22 ++++++++++++++++++++++
>  2 files changed, 34 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
> index d32a3c88a968..8f5dac9dfbdc 100644
> --- a/arch/x86/include/asm/processor.h
> +++ b/arch/x86/include/asm/processor.h
> @@ -327,7 +327,16 @@ struct x86_hw_tss {
>  
>  struct tss_struct {
>  	/*
> -	 * The hardware state:
> +	 * Space for the temporary SYSENTER stack, used for SYSENTER
> +	 * and the entry trampoline as well.
> +	 */
> +	unsigned long		SYSENTER_stack_canary;
> +	unsigned long		SYSENTER_stack[64];
> +
> +	/*
> +	 * The fixed hardware portion.  This must not cross a page boundary
> +	 * at risk of violating the SDM's advice and potentially triggering
> +	 * errata.
>  	 */
>  	struct x86_hw_tss	x86_tss;
>  
> @@ -338,15 +347,9 @@ struct tss_struct {
>  	 * be within the limit.
>  	 */
>  	unsigned long		io_bitmap[IO_BITMAP_LONGS + 1];
> +} __attribute__((__aligned__(PAGE_SIZE)));

WARNING: __aligned(size) is preferred over __attribute__((aligned(size)))
#58: FILE: arch/x86/include/asm/processor.h:350:
+} __attribute__((__aligned__(PAGE_SIZE)));

-- 
Regards/Gruss,
    Boris.

SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
-- 

Re: [PATCH v2 09/18] x86/asm: Move SYSENTER_stack to the beginning of struct tss_struct

[Denys Vlasenko]

On Wed, Nov 22, 2017 at 5:44 AM, Andy Lutomirski <luto@kernel.org> wrote:
> I want SYSENTER_stack to have reliable overflow detection, which
> means that it needs to be at the bottom of a page, not the top.
> Move it to the beginning of struct tss_struct and page-align it.
>
> Also add an assertion to make sure that the fixed hardware TSS
> doesn't cross a page boundary.
>
> Signed-off-by: Andy Lutomirski <luto@kernel.org>
> ---
>  arch/x86/include/asm/processor.h | 21 ++++++++++++---------
>  arch/x86/kernel/cpu/common.c     | 22 ++++++++++++++++++++++
>  2 files changed, 34 insertions(+), 9 deletions(-)
>
> diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
> index d32a3c88a968..8f5dac9dfbdc 100644
> --- a/arch/x86/include/asm/processor.h
> +++ b/arch/x86/include/asm/processor.h
> @@ -327,7 +327,16 @@ struct x86_hw_tss {
>
>  struct tss_struct {
>         /*
> -        * The hardware state:
> +        * Space for the temporary SYSENTER stack, used for SYSENTER
> +        * and the entry trampoline as well.
> +        */
> +       unsigned long           SYSENTER_stack_canary;
> +       unsigned long           SYSENTER_stack[64];
> +
> +       /*
> +        * The fixed hardware portion.  This must not cross a page boundary
> +        * at risk of violating the SDM's advice and potentially triggering
> +        * errata.
>          */
>         struct x86_hw_tss       x86_tss;
>
> @@ -338,15 +347,9 @@ struct tss_struct {
>          * be within the limit.
>          */
>         unsigned long           io_bitmap[IO_BITMAP_LONGS + 1];
> +} __attribute__((__aligned__(PAGE_SIZE)));
>
> -       /*
> -        * Space for the temporary SYSENTER stack.
> -        */
> -       unsigned long           SYSENTER_stack_canary;
> -       unsigned long           SYSENTER_stack[64];
> -} ____cacheline_aligned;

You may also move this initializer in process.c:

.SYSENTER_stack_canary  = STACK_END_MAGIC,

Re: [PATCH v2 09/18] x86/asm: Move SYSENTER_stack to the beginning of struct tss_struct

[Andy Lutomirski]

On Thu, Nov 23, 2017 at 5:16 AM, Denys Vlasenko
<vda.linux@googlemail.com> wrote:
> On Wed, Nov 22, 2017 at 5:44 AM, Andy Lutomirski <luto@kernel.org> wrote:
>> I want SYSENTER_stack to have reliable overflow detection, which
>> means that it needs to be at the bottom of a page, not the top.
>> Move it to the beginning of struct tss_struct and page-align it.
>>
>> Also add an assertion to make sure that the fixed hardware TSS
>> doesn't cross a page boundary.
>>
>> Signed-off-by: Andy Lutomirski <luto@kernel.org>
>> ---
>>  arch/x86/include/asm/processor.h | 21 ++++++++++++---------
>>  arch/x86/kernel/cpu/common.c     | 22 ++++++++++++++++++++++
>>  2 files changed, 34 insertions(+), 9 deletions(-)
>>
>> diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
>> index d32a3c88a968..8f5dac9dfbdc 100644
>> --- a/arch/x86/include/asm/processor.h
>> +++ b/arch/x86/include/asm/processor.h
>> @@ -327,7 +327,16 @@ struct x86_hw_tss {
>>
>>  struct tss_struct {
>>         /*
>> -        * The hardware state:
>> +        * Space for the temporary SYSENTER stack, used for SYSENTER
>> +        * and the entry trampoline as well.
>> +        */
>> +       unsigned long           SYSENTER_stack_canary;
>> +       unsigned long           SYSENTER_stack[64];
>> +
>> +       /*
>> +        * The fixed hardware portion.  This must not cross a page boundary
>> +        * at risk of violating the SDM's advice and potentially triggering
>> +        * errata.
>>          */
>>         struct x86_hw_tss       x86_tss;
>>
>> @@ -338,15 +347,9 @@ struct tss_struct {
>>          * be within the limit.
>>          */
>>         unsigned long           io_bitmap[IO_BITMAP_LONGS + 1];
>> +} __attribute__((__aligned__(PAGE_SIZE)));
>>
>> -       /*
>> -        * Space for the temporary SYSENTER stack.
>> -        */
>> -       unsigned long           SYSENTER_stack_canary;
>> -       unsigned long           SYSENTER_stack[64];
>> -} ____cacheline_aligned;
>
> You may also move this initializer in process.c:
>
> .SYSENTER_stack_canary  = STACK_END_MAGIC,

Hmm.  I think I'll leave it for now to avoid churn and then I'll just
delete it entirely once the dust settles.  The canary is rather
pointless given that we'll have an actual guard page.

Re: [PATCH v2 06/18] x86/kasan/64: Teach KASAN about the cpu_entry_area

[Andy Lutomirski]

On Thu, Nov 23, 2017 at 2:08 AM, Andrey Ryabinin
<aryabinin@virtuozzo.com> wrote:
>
>
> On 11/22/2017 06:22 PM, Andy Lutomirski wrote:
>> On Wed, Nov 22, 2017 at 1:05 AM, Andrey Ryabinin
>> <aryabinin@virtuozzo.com> wrote:
>>>
>>>
>>> On 11/22/2017 07:44 AM, Andy Lutomirski wrote:
>>>> The cpu_entry_area will contain stacks.  Make sure that KASAN has
>>>> appropriate shadow mappings for them.
>>>>
>>>> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
>>>> Cc: Alexander Potapenko <glider@google.com>
>>>> Cc: Dmitry Vyukov <dvyukov@google.com>
>>>> Cc: kasan-dev@googlegroups.com
>>>> Signed-off-by: Andy Lutomirski <luto@kernel.org>
>>>> ---
>>>>  arch/x86/mm/kasan_init_64.c | 9 ++++++++-
>>>>  1 file changed, 8 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
>>>> index 99dfed6dfef8..43d376687315 100644
>>>> --- a/arch/x86/mm/kasan_init_64.c
>>>> +++ b/arch/x86/mm/kasan_init_64.c
>>>> @@ -330,7 +330,14 @@ void __init kasan_init(void)
>>>>                             early_pfn_to_nid(__pa(_stext)));
>>>>
>>>>       kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)MODULES_END),
>>>> -                     (void *)KASAN_SHADOW_END);
>>>> +                                kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM))));
>>>> +
>>>> +     kasan_populate_shadow((unsigned long)kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM))),
>>>> +                           (unsigned long)kasan_mem_to_shadow((void *)(__fix_to_virt(FIX_CPU_ENTRY_AREA_TOP) + PAGE_SIZE)),
>>>
>>> What's '+ PAGE_SIZE' for?
>>>
>>
>> __fix_to_virt(..._TOP) returns the address of the *bottom* of the last
>> cpu_entry_area page.  +PAGE_SIZE returns one past the end of the
>> region, which I assume is the correct thing to pass.
>>
>
> Right.
>
> Perhaps, it would be better to use variables, just avoid such awfully long lines, I mean like this:
>         fixmap_shadow_start = (void *)__fix_to_virt(FIX_CPU_ENTRY_AREA_BOTTOM);
>         fixmap_shadow_start = kasan_mem_to_shadow(fixmap_shadow_start);
>
>         fixmap_shadow_end = (void *)__fix_to_virt(FIX_CPU_ENTRY_AREA_TOP) + PAGE_SIZE;
>         fixmap_shadow_end = kasan_mem_to_shadow(fixmap_shadow_end);
>
>         kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)MODULES_END),
>                                    fixmap_shadow_start);
>
>         kasan_populate_shadow((unsigned long)fixmap_shadow_start,
>                         (unsigned long)fixmap_shadow_end,
>                         0);
>
> I'm also thinking that we should change kasan_populate_shadow() to take void* instead of 'unsigned long'
> to avoid those casts.

I did something similar, but I left the kasan_mem_to_shadow in for
consistency with the rest.

I think the real way to clean this up is like this:

struct kasan_range {
  void *start;
  void *end;
};

struct kasan_range ranges[] = {
 { range 1 },
 { range 2 },
};

sort(range, ARRAY_SIZE(ranges), sizeof(ranges[0]), ...);

last_end = PAGE_OFFSET;  /* or whatever is right */

for (i = 0; i < ARRAY_SIZE(ranges); i++) [
  WARN_ON(ranges[i].start < last_end);

  if (ranges[i].start > last_end)
    kasan_populate_zero_shadow(...);
  kasan_populate_shadow(...);
 last_end = ranges[i].end;
}

kasan_populate_zero_shadow(last_end, the real end);

Then the code doesn't need to duplicate each boundary or to hardcode
the order in which things appear.

Re: [PATCH v2 05/18] x86/fixmap: Generalize the GDT fixmap mechanism

[Andy Lutomirski]

On Wed, Nov 22, 2017 at 9:32 AM, Borislav Petkov <bp@suse.de> wrote:
> On Wed, Nov 22, 2017 at 09:16:00AM -0800, Andy Lutomirski wrote:
>> Agreed, except that the fixmap enum needs to know
>> sizeof(cpu_entry_area), and I'm really hesitant to add yet another
>> header dependency.
>
> Perhaps a separate asm/cpuarea.h. asm/cpu.h looks small enough but it
> has hotplug and other misc stuff in there.
>
> Bah, our header separation needs a serious cleanup. ;-\
>
>> My general habit is that I like the != 0 here because I'm doing
>> arithmetic rather than thinking of % as some kind of logical operator.
>> I.e. I find it easier to understand the way I wrote it.
>
> I know, and I can recognize the code you wrote in arch/x86/ just by
> those tests, without looking at git blame output. :-)
>
> In my case, without the != 0 reads easier.

I'm making the kernel more personal!

Re: [PATCH v2 00/18] Entry stack switching

[Andy Lutomirski]

On Wed, Nov 22, 2017 at 10:58 PM, Ingo Molnar <mingo@kernel.org> wrote:
>
> * Ingo Molnar <mingo@kernel.org> wrote:
>
>>
>> * Ingo Molnar <mingo@kernel.org> wrote:
>>
>> > > Anyway, I booted your config (more or less -- I munged it through
>> > > virtme-configkernel --update first) with 17 vCPUs and it seems fine.
>> > > Is the issue reliable enough to bisect?
>> >
>> > Ok, it should be bisectable, will try to bisect it.
>>
>> The latestest entry-stack code appears to be working fine though.
>>
>> So one of the below fixes from yesterday appears to have done the trick.
>>
>> I'll re-test today to make sure: maybe it's more sporadic than I thought, in one
>> of the bootups I got the do_IRQ warning only once, in half a day of uptime.
>
> I re-tested and it all seems fine now. I suspect it got fixed by:
>
>   ca37e57bbe0c: x86/entry/64: Add missing irqflags tracing to native_load_gs_index()
>
> still it is weird, because I boot that system with latest -tip on a daily basis,
> and don't remember having seen that warning.
>
> Do you have any theory for why the entry stack changes would uncover this bug?

No.  I also don't see why it would have anything to do with irqflag
tracing.  As far as I know, the unhandled IRQ warning has nothing to
do with tracing or lockdep.

Re: [PATCH v2 00/18] Entry stack switching

[Thomas Gleixner]

On Thu, 23 Nov 2017, Andy Lutomirski wrote:
> On Wed, Nov 22, 2017 at 10:58 PM, Ingo Molnar <mingo@kernel.org> wrote:
> > * Ingo Molnar <mingo@kernel.org> wrote:
> >> * Ingo Molnar <mingo@kernel.org> wrote:
> >>
> >> > > Anyway, I booted your config (more or less -- I munged it through
> >> > > virtme-configkernel --update first) with 17 vCPUs and it seems fine.
> >> > > Is the issue reliable enough to bisect?
> >> >
> >> > Ok, it should be bisectable, will try to bisect it.
> >>
> >> The latestest entry-stack code appears to be working fine though.
> >>
> >> So one of the below fixes from yesterday appears to have done the trick.
> >>
> >> I'll re-test today to make sure: maybe it's more sporadic than I thought, in one
> >> of the bootups I got the do_IRQ warning only once, in half a day of uptime.
> >
> > I re-tested and it all seems fine now. I suspect it got fixed by:
> >
> >   ca37e57bbe0c: x86/entry/64: Add missing irqflags tracing to native_load_gs_index()
> >
> > still it is weird, because I boot that system with latest -tip on a daily basis,
> > and don't remember having seen that warning.
> >
> > Do you have any theory for why the entry stack changes would uncover this bug?
> 
> No.  I also don't see why it would have anything to do with irqflag
> tracing.  As far as I know, the unhandled IRQ warning has nothing to
> do with tracing or lockdep.

I suspect its more likely some subtle interaction with that newfangled
vector management code. You should poke the grumpy old greybeard.

Thanks,

	tglx

Re: [PATCH v2 05/18] x86/fixmap: Generalize the GDT fixmap mechanism

[Thomas Gleixner]

On Tue, 21 Nov 2017, Andy Lutomirski wrote:

> Currently, the GDT is an ad-hoc array of pages, one per CPU, in the
> fixmap.  Generalize it to be an array of a new struct cpu_entry_area
> so that we can cleanly add new things to it.
> 
> Signed-off-by: Andy Lutomirski <luto@kernel.org>

> +/*
> + * cpu_entry_area is a percpu region in the fixmap that contains things
> + * needed by the CPU and early entry/exit code.  Real types aren't used
> + * for all fields here to about circular header dependencies.

s/to about/to avoid/ ???

Other than that.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

Re: [PATCH v2 09/18] x86/asm: Move SYSENTER_stack to the beginning of struct tss_struct

[Thomas Gleixner]

On Tue, 21 Nov 2017, Andy Lutomirski wrote:

> I want SYSENTER_stack to have reliable overflow detection, which
> means that it needs to be at the bottom of a page, not the top.
> Move it to the beginning of struct tss_struct and page-align it.
> 
> Also add an assertion to make sure that the fixed hardware TSS
> doesn't cross a page boundary.
> 
> Signed-off-by: Andy Lutomirski <luto@kernel.org>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

Re: [PATCH v2 10/18] x86/asm: Remap the TSS into the cpu entry area

[Thomas Gleixner]

On Tue, 21 Nov 2017, Andy Lutomirski wrote:

> This has a secondary purpose: it puts the entry stack into a region
> with a well-controlled layout.  A subsequent patch will take
> advantage of this to streamline the SYSCALL entry code to be able to
> find it more easily.
> 
> Signed-off-by: Andy Lutomirski <luto@kernel.org>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

Re: [PATCH v2 11/18] x86/asm/64: Separate cpu_current_top_of_stack from TSS.sp0

[Thomas Gleixner]

On Tue, 21 Nov 2017, Andy Lutomirski wrote:

> On 64-bit kernels, we used to assume that TSS.sp0 was the current
> top of stack.  With the addition of an entry trampoline, this will
> no longer be the case.  Store the current top of stack in TSS.sp1,
> which is otherwise unused but shares the same cacheline.
> 
> Signed-off-by: Andy Lutomirski <luto@kernel.org>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

Re: [PATCH v2 12/18] x86/espfix/64: Stop assuming that pt_regs is on the entry stack

[Thomas Gleixner]

On Tue, 21 Nov 2017, Andy Lutomirski wrote:

> When we start using an entry trampoline, a #GP from userspace will
> be delivered on the entry stack, not on the task stack.  Fix the
> espfix64 #DF fixup to set up #GP according to TSS.SP0, rather than
> assuming that pt_regs + 1 == SP0.  This won't change anything
> without an entry stack, but it will make the code continue to work
> when an entry stack is added.
> 
> Signed-off-by: Andy Lutomirski <luto@kernel.org>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

Re: [PATCH v2 10/18] x86/asm: Remap the TSS into the cpu entry area

[Borislav Petkov]

On Tue, Nov 21, 2017 at 08:44:05PM -0800, Andy Lutomirski wrote:
> This has a secondary purpose: it puts the entry stack into a region
> with a well-controlled layout.  A subsequent patch will take
> advantage of this to streamline the SYSCALL entry code to be able to
> find it more easily.
> 
> Signed-off-by: Andy Lutomirski <luto@kernel.org>
> ---
>  arch/x86/entry/entry_32.S     |  6 ++++--
>  arch/x86/include/asm/fixmap.h |  7 +++++++
>  arch/x86/kernel/asm-offsets.c |  3 +++
>  arch/x86/kernel/cpu/common.c  | 40 ++++++++++++++++++++++++++++++++++------
>  arch/x86/kernel/dumpstack.c   |  3 ++-
>  arch/x86/power/cpu.c          | 11 ++++++-----
>  6 files changed, 56 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
> index 4838037f97f6..0ab316c46806 100644
> --- a/arch/x86/entry/entry_32.S
> +++ b/arch/x86/entry/entry_32.S
> @@ -941,7 +941,8 @@ ENTRY(debug)
>  	movl	%esp, %eax			# pt_regs pointer
>  
>  	/* Are we currently on the SYSENTER stack? */
> -	PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
> +	movl	PER_CPU_VAR(cpu_entry_area), %ecx
> +	addl	$CPU_ENTRY_AREA_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx
>  	subl	%eax, %ecx	/* ecx = (end of SYSENTER_stack) - esp */

Fixup that comment while you're at it to be either ontop or be of the
#-type. The cool thing about the # comments is that gas puts them in the
.s output too, so you can find them again.

>  	cmpl	$SIZEOF_SYSENTER_stack, %ecx
>  	jb	.Ldebug_from_sysenter_stack
> @@ -984,7 +985,8 @@ ENTRY(nmi)
>  	movl	%esp, %eax			# pt_regs pointer
>  
>  	/* Are we currently on the SYSENTER stack? */
> -	PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
> +	movl	PER_CPU_VAR(cpu_entry_area), %ecx
> +	addl	$CPU_ENTRY_AREA_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx
>  	subl	%eax, %ecx	/* ecx = (end of SYSENTER_stack) - esp */

Ditto.

>  	cmpl	$SIZEOF_SYSENTER_stack, %ecx
>  	jb	.Lnmi_from_sysenter_stack

...

> diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
> index b275863128eb..55858b277cf6 100644
> --- a/arch/x86/kernel/asm-offsets.c
> +++ b/arch/x86/kernel/asm-offsets.c
> @@ -98,4 +98,7 @@ void common(void) {
>  	OFFSET(CPU_TSS_SYSENTER_stack, tss_struct, SYSENTER_stack);
>  	/* Size of SYSENTER_stack */
>  	DEFINE(SIZEOF_SYSENTER_stack, sizeof(((struct tss_struct *)0)->SYSENTER_stack));
> +
> +	/* Layout info for cpu_entry_area */
> +	OFFSET(CPU_ENTRY_AREA_tss, cpu_entry_area, tss);

The naming convention of those looks really strange. The beginning is in
all caps and then small. Can we choose a convention pls.

And the comments are not really needed - the variable names already say
what they are.

...

> @@ -1281,7 +1304,8 @@ void enable_sep_cpu(void)
>  	wrmsr(MSR_IA32_SYSENTER_CS, tss->x86_tss.ss1, 0);
>  
>  	wrmsr(MSR_IA32_SYSENTER_ESP,
> -	      (unsigned long)tss + offsetofend(struct tss_struct, SYSENTER_stack),
> +	      (unsigned long)&get_cpu_entry_area(cpu)->tss +
> +	      offsetofend(struct tss_struct, SYSENTER_stack),
>  	      0);

Use a local var:

	unsigned long se_esp;

	...

	se_esp = (unsigned long)&get_cpu_entry_area(cpu)->tss + offsetofend(struct tss_struct, SYSENTER_stack);

	wrmsr(MSR_IA32_SYSENTER_ESP, se_esp, 0);

>  
>  	wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)entry_SYSENTER_32, 0);
> @@ -1394,6 +1418,8 @@ static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
>  /* May not be marked __init: used by software suspend */
>  void syscall_init(void)
>  {
> +	int cpu = smp_processor_id();
> +
>  	wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
>  	wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
>  
> @@ -1407,7 +1433,7 @@ void syscall_init(void)
>  	 */
>  	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
>  	wrmsrl_safe(MSR_IA32_SYSENTER_ESP,
> -		    (unsigned long)this_cpu_ptr(&cpu_tss) +
> +		    (unsigned long)&get_cpu_entry_area(cpu)->tss +
>  		    offsetofend(struct tss_struct, SYSENTER_stack));

Ditto.

>  	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
>  #else

-- 
Regards/Gruss,
    Boris.

SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
-- 

Re: [PATCH v2 10/18] x86/asm: Remap the TSS into the cpu entry area

[Andy Lutomirski]

On Thu, Nov 23, 2017 at 11:55 AM, Borislav Petkov <bp@suse.de> wrote:
> On Tue, Nov 21, 2017 at 08:44:05PM -0800, Andy Lutomirski wrote:
>> This has a secondary purpose: it puts the entry stack into a region
>> with a well-controlled layout.  A subsequent patch will take
>> advantage of this to streamline the SYSCALL entry code to be able to
>> find it more easily.
>>
>> Signed-off-by: Andy Lutomirski <luto@kernel.org>
>> ---
>>  arch/x86/entry/entry_32.S     |  6 ++++--
>>  arch/x86/include/asm/fixmap.h |  7 +++++++
>>  arch/x86/kernel/asm-offsets.c |  3 +++
>>  arch/x86/kernel/cpu/common.c  | 40 ++++++++++++++++++++++++++++++++++------
>>  arch/x86/kernel/dumpstack.c   |  3 ++-
>>  arch/x86/power/cpu.c          | 11 ++++++-----
>>  6 files changed, 56 insertions(+), 14 deletions(-)
>>
>> diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
>> index 4838037f97f6..0ab316c46806 100644
>> --- a/arch/x86/entry/entry_32.S
>> +++ b/arch/x86/entry/entry_32.S
>> @@ -941,7 +941,8 @@ ENTRY(debug)
>>       movl    %esp, %eax                      # pt_regs pointer
>>
>>       /* Are we currently on the SYSENTER stack? */
>> -     PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
>> +     movl    PER_CPU_VAR(cpu_entry_area), %ecx
>> +     addl    $CPU_ENTRY_AREA_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx
>>       subl    %eax, %ecx      /* ecx = (end of SYSENTER_stack) - esp */
>
> Fixup that comment while you're at it to be either ontop or be of the
> #-type. The cool thing about the # comments is that gas puts them in the
> .s output too, so you can find them again.
>
>>       cmpl    $SIZEOF_SYSENTER_stack, %ecx
>>       jb      .Ldebug_from_sysenter_stack
>> @@ -984,7 +985,8 @@ ENTRY(nmi)
>>       movl    %esp, %eax                      # pt_regs pointer
>>
>>       /* Are we currently on the SYSENTER stack? */
>> -     PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
>> +     movl    PER_CPU_VAR(cpu_entry_area), %ecx
>> +     addl    $CPU_ENTRY_AREA_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx
>>       subl    %eax, %ecx      /* ecx = (end of SYSENTER_stack) - esp */
>
> Ditto.

Nifty.  I didn't know about that.

>
>>       cmpl    $SIZEOF_SYSENTER_stack, %ecx
>>       jb      .Lnmi_from_sysenter_stack
>
> ...
>
>> diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
>> index b275863128eb..55858b277cf6 100644
>> --- a/arch/x86/kernel/asm-offsets.c
>> +++ b/arch/x86/kernel/asm-offsets.c
>> @@ -98,4 +98,7 @@ void common(void) {
>>       OFFSET(CPU_TSS_SYSENTER_stack, tss_struct, SYSENTER_stack);
>>       /* Size of SYSENTER_stack */
>>       DEFINE(SIZEOF_SYSENTER_stack, sizeof(((struct tss_struct *)0)->SYSENTER_stack));
>> +
>> +     /* Layout info for cpu_entry_area */
>> +     OFFSET(CPU_ENTRY_AREA_tss, cpu_entry_area, tss);
>
> The naming convention of those looks really strange. The beginning is in
> all caps and then small. Can we choose a convention pls.

This is actually consistent with the rest of the offsets.  The
convention is STRUCT_field.

>
> And the comments are not really needed - the variable names already say
> what they are.

Fair enough.

>
> ...
>
>> @@ -1281,7 +1304,8 @@ void enable_sep_cpu(void)
>>       wrmsr(MSR_IA32_SYSENTER_CS, tss->x86_tss.ss1, 0);
>>
>>       wrmsr(MSR_IA32_SYSENTER_ESP,
>> -           (unsigned long)tss + offsetofend(struct tss_struct, SYSENTER_stack),
>> +           (unsigned long)&get_cpu_entry_area(cpu)->tss +
>> +           offsetofend(struct tss_struct, SYSENTER_stack),
>>             0);
>
> Use a local var:
>
>         unsigned long se_esp;
>
>         ...
>
>         se_esp = (unsigned long)&get_cpu_entry_area(cpu)->tss + offsetofend(struct tss_struct, SYSENTER_stack);
>
>         wrmsr(MSR_IA32_SYSENTER_ESP, se_esp, 0);

Hmm.  I may just add a helper in a header for this.  It has plenty of users.

>
>>
>>       wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)entry_SYSENTER_32, 0);
>> @@ -1394,6 +1418,8 @@ static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
>>  /* May not be marked __init: used by software suspend */
>>  void syscall_init(void)
>>  {
>> +     int cpu = smp_processor_id();
>> +
>>       wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
>>       wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
>>
>> @@ -1407,7 +1433,7 @@ void syscall_init(void)
>>        */
>>       wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
>>       wrmsrl_safe(MSR_IA32_SYSENTER_ESP,
>> -                 (unsigned long)this_cpu_ptr(&cpu_tss) +
>> +                 (unsigned long)&get_cpu_entry_area(cpu)->tss +
>>                   offsetofend(struct tss_struct, SYSENTER_stack));
>
> Ditto.
>
>>       wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
>>  #else
>
> --
> Regards/Gruss,
>     Boris.
>
> SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
> --

Re: [PATCH v2 10/18] x86/asm: Remap the TSS into the cpu entry area

[Borislav Petkov]

On Thu, Nov 23, 2017 at 12:15:14PM -0800, Andy Lutomirski wrote:
> >> diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
> >> index b275863128eb..55858b277cf6 100644
> >> --- a/arch/x86/kernel/asm-offsets.c
> >> +++ b/arch/x86/kernel/asm-offsets.c
> >> @@ -98,4 +98,7 @@ void common(void) {
> >>       OFFSET(CPU_TSS_SYSENTER_stack, tss_struct, SYSENTER_stack);
> >>       /* Size of SYSENTER_stack */
> >>       DEFINE(SIZEOF_SYSENTER_stack, sizeof(((struct tss_struct *)0)->SYSENTER_stack));
> >> +
> >> +     /* Layout info for cpu_entry_area */
> >> +     OFFSET(CPU_ENTRY_AREA_tss, cpu_entry_area, tss);
> >
> > The naming convention of those looks really strange. The beginning is in
> > all caps and then small. Can we choose a convention pls.
> 
> This is actually consistent with the rest of the offsets.  The
> convention is STRUCT_field.

Except CPU_TSS_SYSENTER_stack. TSS_STRUCT_SYSENTER_stack I guess.

-- 
Regards/Gruss,
    Boris.

SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
-- 

Re: [PATCH v2 13/18] x86/asm/64: Use a percpu trampoline stack for IDT entries

[Thomas Gleixner]

On Tue, 21 Nov 2017, Andy Lutomirski wrote:
> The asm isn't exactly beautiful,

Delightful euphemism :)

> but I think that fully refactoring
> it can wait.

> @@ -560,6 +560,14 @@ END(irq_entries_start)
>  	.macro interrupt func
>  	cld
>  	ALLOC_PT_GPREGS_ON_STACK
> +
> +	testb	$3, CS(%rsp)
> +	jz	1f
> +	SWAPGS
> +	call	switch_to_thread_stack
> +	SWAPGS

I'm surely missing something subtle, but the register saving does really
not care on which GS it is. This swapgs orgy looks odd.

> +1:
> +
>  	SAVE_C_REGS
>  	SAVE_EXTRA_REGS
>  	ENCODE_FRAME_POINTER
> @@ -827,6 +835,33 @@ apicinterrupt IRQ_WORK_VECTOR			irq_work_interrupt		smp_irq_work_interrupt
>   */
>  #define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss) + (TSS_ist + ((x) - 1) * 8)
>  
> +/*
> + * Switch to the thread stack.  This is called with the IRET frame and
> + * orig_ax in pt_regs and the rest of pt_regs allocated, but with all GPRs
> + * in the CPU registers.

That took several attempts to grok why you left ALLOC_PT_GPRES_ON_STACK in
place in the interrupts macro above.

In theory it would be sufficient to push %rdi on the entry stack and
operate from there, but it spares only the 'addq %rsp'. Not worth the
trouble of dealing with different register offsets.

A comment to that effect would be useful if you look at that 3 month from
now.

> + */
> +ENTRY(switch_to_thread_stack)
> +	UNWIND_HINT_IRET_REGS offset=17*8
> +
> +	movq	%rdi, RDI+8(%rsp)
> +	movq	%rsp, %rdi
> +	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
> +	UNWIND_HINT_IRET_REGS offset=17*8 base=%rdi
> +
> +	pushq	SS+8(%rdi)		/* regs->ss */
> +	pushq	RSP+8(%rdi)		/* regs->rsp */
> +	pushq	EFLAGS+8(%rdi)		/* regs->eflags */
> +	pushq	CS+8(%rdi)		/* regs->cs */
> +	pushq	RIP+8(%rdi)		/* regs->ip */
> +	pushq	ORIG_RAX+8(%rdi)	/* regs->orig_ax */
> +	ALLOC_PT_GPREGS_ON_STACK	/* allocate the rest of regs */
> +	pushq	(%rdi)			/* return address */
> +
> +	movq	RDI+8(%rdi), %rdi
> +	UNWIND_HINT_IRET_REGS offset=17*8
> +	ret
> +END(switch_to_thread_stack)

Thanks,

	tglx

Re: [PATCH v2 10/18] x86/asm: Remap the TSS into the cpu entry area

[Andy Lutomirski]

On Thu, Nov 23, 2017 at 12:37 PM, Borislav Petkov <bp@suse.de> wrote:
> On Thu, Nov 23, 2017 at 12:15:14PM -0800, Andy Lutomirski wrote:
>> >> diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
>> >> index b275863128eb..55858b277cf6 100644
>> >> --- a/arch/x86/kernel/asm-offsets.c
>> >> +++ b/arch/x86/kernel/asm-offsets.c
>> >> @@ -98,4 +98,7 @@ void common(void) {
>> >>       OFFSET(CPU_TSS_SYSENTER_stack, tss_struct, SYSENTER_stack);
>> >>       /* Size of SYSENTER_stack */
>> >>       DEFINE(SIZEOF_SYSENTER_stack, sizeof(((struct tss_struct *)0)->SYSENTER_stack));
>> >> +
>> >> +     /* Layout info for cpu_entry_area */
>> >> +     OFFSET(CPU_ENTRY_AREA_tss, cpu_entry_area, tss);
>> >
>> > The naming convention of those looks really strange. The beginning is in
>> > all caps and then small. Can we choose a convention pls.
>>
>> This is actually consistent with the rest of the offsets.  The
>> convention is STRUCT_field.
>
> Except CPU_TSS_SYSENTER_stack. TSS_STRUCT_SYSENTER_stack I guess.

Hmm, that name predates this series.  I'll clean it up in a new patch
at the end of the series.

Re: [PATCH v2 13/18] x86/asm/64: Use a percpu trampoline stack for IDT entries

[Andy Lutomirski]

On Thu, Nov 23, 2017 at 3:44 PM, Thomas Gleixner <tglx@linutronix.de> wrote:
> On Tue, 21 Nov 2017, Andy Lutomirski wrote:
>> The asm isn't exactly beautiful,
>
> Delightful euphemism :)
>
>> but I think that fully refactoring
>> it can wait.
>
>> @@ -560,6 +560,14 @@ END(irq_entries_start)
>>       .macro interrupt func
>>       cld
>>       ALLOC_PT_GPREGS_ON_STACK
>> +
>> +     testb   $3, CS(%rsp)
>> +     jz      1f
>> +     SWAPGS
>> +     call    switch_to_thread_stack
>> +     SWAPGS
>
> I'm surely missing something subtle, but the register saving does really
> not care on which GS it is. This swapgs orgy looks odd.

You're mostly right.  switch_to_thread_stack uses
PER_CPU_VAR(cpu_current_top_of_stack), which definitely cares about
which GS it's on, but there's still no legitimate reason for the
SWAPGS orgy.  I'll fix it.

>
>> +1:
>> +
>>       SAVE_C_REGS
>>       SAVE_EXTRA_REGS
>>       ENCODE_FRAME_POINTER
>> @@ -827,6 +835,33 @@ apicinterrupt IRQ_WORK_VECTOR                    irq_work_interrupt              smp_irq_work_interrupt
>>   */
>>  #define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss) + (TSS_ist + ((x) - 1) * 8)
>>
>> +/*
>> + * Switch to the thread stack.  This is called with the IRET frame and
>> + * orig_ax in pt_regs and the rest of pt_regs allocated, but with all GPRs
>> + * in the CPU registers.
>
> That took several attempts to grok why you left ALLOC_PT_GPRES_ON_STACK in
> place in the interrupts macro above.
>
> In theory it would be sufficient to push %rdi on the entry stack and
> operate from there, but it spares only the 'addq %rsp'. Not worth the
> trouble of dealing with different register offsets.

Hrm.  There wasn't actually a good reason for that.  I got rid of it.

Re: [PATCH v2 10/18] x86/asm: Remap the TSS into the cpu entry area

[Andy Lutomirski]

On Thu, Nov 23, 2017 at 6:40 PM, Andy Lutomirski <luto@kernel.org> wrote:
> On Thu, Nov 23, 2017 at 12:37 PM, Borislav Petkov <bp@suse.de> wrote:
>> On Thu, Nov 23, 2017 at 12:15:14PM -0800, Andy Lutomirski wrote:
>>> >> diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
>>> >> index b275863128eb..55858b277cf6 100644
>>> >> --- a/arch/x86/kernel/asm-offsets.c
>>> >> +++ b/arch/x86/kernel/asm-offsets.c
>>> >> @@ -98,4 +98,7 @@ void common(void) {
>>> >>       OFFSET(CPU_TSS_SYSENTER_stack, tss_struct, SYSENTER_stack);
>>> >>       /* Size of SYSENTER_stack */
>>> >>       DEFINE(SIZEOF_SYSENTER_stack, sizeof(((struct tss_struct *)0)->SYSENTER_stack));
>>> >> +
>>> >> +     /* Layout info for cpu_entry_area */
>>> >> +     OFFSET(CPU_ENTRY_AREA_tss, cpu_entry_area, tss);
>>> >
>>> > The naming convention of those looks really strange. The beginning is in
>>> > all caps and then small. Can we choose a convention pls.
>>>
>>> This is actually consistent with the rest of the offsets.  The
>>> convention is STRUCT_field.
>>
>> Except CPU_TSS_SYSENTER_stack. TSS_STRUCT_SYSENTER_stack I guess.
>
> Hmm, that name predates this series.  I'll clean it up in a new patch
> at the end of the series.

I'm also going to leave the end-of-line comment alone for now.  We can
maybe make that change to a bunch of comments later on.