From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Sun, 3 Dec 2017 23:25:28 +0100 Subject: [Buildroot] [PATCH 1/3] board/orangepi: add support for orangepi-pc-plus board In-Reply-To: <20171108194334.10031-2-geomatsi@gmail.com> References: <20171108194334.10031-1-geomatsi@gmail.com> <20171108194334.10031-2-geomatsi@gmail.com> Message-ID: <20171203232528.237e3ec3@windsurf.home> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Wed, 8 Nov 2017 22:43:32 +0300, Sergey Matyukevich wrote: > This board is a variant of orangepi-pc board. It adds 8GB eMMC and Realtek > RTL8189FTV SDIO WiFi chip. This variant has a separate support in U-Boot > and kernel. So it makes sense to create a separate entry > for this board in buildroot. > > Board support package includes the following components: > - mainline u-boot 2017.09 > - mainline kernel 4.13.11 > > Signed-off-by: Sergey Matyukevich I've applied, after adding an entry to the DEVELOPERS file. One comment, though. > board/orangepi/orangepi-pc-plus/boot.cmd | 8 +++++ > board/orangepi/orangepi-pc-plus/genimage.cfg | 36 ++++++++++++++++++++ > .../orangepi/orangepi-pc-plus/linux-extras.config | 8 +++++ > board/orangepi/orangepi-pc-plus/post-build.sh | 1 + This common post-build script only generates the U-Boot script. Could you move the boards that use this post-build script to instead use BR2_TARGET_UBOOT_BOOT_SCRIPT ? Thanks! Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com