From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: linux@armlinux.org.uk, mark.rutland@arm.com,
maxime.ripard@free-electrons.com, robh+dt@kernel.org,
wens@csie.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
Corentin Labbe <clabbe.montjoie@gmail.com>
Subject: [PATCH] ARM: dts: sun8i-h3: Remove allwinner,leds-active-low for non internal PHY
Date: Thu, 7 Dec 2017 19:21:02 +0100 [thread overview]
Message-ID: <20171207182102.16127-1-clabbe.montjoie@gmail.com> (raw)
allwinner,leds-active-low have effect only on boards which us the internal PHY.
So this patch remove it from all boards which do not use the internal PHY.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 1 -
arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 2 --
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 1 -
3 files changed, 4 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index f2292deaa590..f1c3f1cc4d97 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -119,7 +119,6 @@
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
- allwinner,leds-active-low;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
index 0a8b79cf5954..b9ffa4d9c873 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -83,8 +83,6 @@
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
- allwinner,leds-active-low;
-
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index cbc499b04de4..b403e5d787cb 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -85,7 +85,6 @@
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
- allwinner,leds-active-low;
status = "okay";
};
--
2.13.6
WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
wens-jdAy2FN1RRM@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Corentin Labbe
<clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH] ARM: dts: sun8i-h3: Remove allwinner,leds-active-low for non internal PHY
Date: Thu, 7 Dec 2017 19:21:02 +0100 [thread overview]
Message-ID: <20171207182102.16127-1-clabbe.montjoie@gmail.com> (raw)
allwinner,leds-active-low have effect only on boards which us the internal PHY.
So this patch remove it from all boards which do not use the internal PHY.
Signed-off-by: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 1 -
arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 2 --
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 1 -
3 files changed, 4 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index f2292deaa590..f1c3f1cc4d97 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -119,7 +119,6 @@
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
- allwinner,leds-active-low;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
index 0a8b79cf5954..b9ffa4d9c873 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -83,8 +83,6 @@
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
- allwinner,leds-active-low;
-
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index cbc499b04de4..b403e5d787cb 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -85,7 +85,6 @@
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
- allwinner,leds-active-low;
status = "okay";
};
--
2.13.6
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: clabbe.montjoie@gmail.com (Corentin Labbe)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: sun8i-h3: Remove allwinner, leds-active-low for non internal PHY
Date: Thu, 7 Dec 2017 19:21:02 +0100 [thread overview]
Message-ID: <20171207182102.16127-1-clabbe.montjoie@gmail.com> (raw)
allwinner,leds-active-low have effect only on boards which us the internal PHY.
So this patch remove it from all boards which do not use the internal PHY.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 1 -
arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 2 --
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 1 -
3 files changed, 4 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index f2292deaa590..f1c3f1cc4d97 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -119,7 +119,6 @@
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
- allwinner,leds-active-low;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
index 0a8b79cf5954..b9ffa4d9c873 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -83,8 +83,6 @@
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
- allwinner,leds-active-low;
-
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index cbc499b04de4..b403e5d787cb 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -85,7 +85,6 @@
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
- allwinner,leds-active-low;
status = "okay";
};
--
2.13.6
next reply other threads:[~2017-12-07 18:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-07 18:21 Corentin Labbe [this message]
2017-12-07 18:21 ` [PATCH] ARM: dts: sun8i-h3: Remove allwinner, leds-active-low for non internal PHY Corentin Labbe
2017-12-07 18:21 ` [PATCH] ARM: dts: sun8i-h3: Remove allwinner,leds-active-low " Corentin Labbe
2017-12-08 9:13 ` Maxime Ripard
2017-12-08 9:13 ` [PATCH] ARM: dts: sun8i-h3: Remove allwinner, leds-active-low " Maxime Ripard
2017-12-08 9:13 ` [PATCH] ARM: dts: sun8i-h3: Remove allwinner,leds-active-low " Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171207182102.16127-1-clabbe.montjoie@gmail.com \
--to=clabbe.montjoie@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.