Hi,

On Fri, Dec 08, 2017 at 10:54:17PM +0100, Mylène Josserand wrote:
> The A711 has a touchscreen connected by I2C0.
> Enable only I2C0 node for the moment.
> 
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> ---
>  arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> index a021ee6da396..84cca1a48cea 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> @@ -105,6 +105,13 @@
>  	status = "okay";
>  };
>  
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0_pins>;

If there's only one set of pins, maybe we should force that muxing in
the DTSI?

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com