From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-it0-f49.google.com ([209.85.214.49]:38069 "EHLO mail-it0-f49.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751029AbdLNCFl (ORCPT ); Wed, 13 Dec 2017 21:05:41 -0500 Received: by mail-it0-f49.google.com with SMTP id r6so7471254itr.3 for ; Wed, 13 Dec 2017 18:05:40 -0800 (PST) From: Eric Biggers Subject: [PATCH v2] xfstests-bld: add support for UBIFS using block2mtd Date: Wed, 13 Dec 2017 18:03:48 -0800 Message-Id: <20171214020348.185463-1-ebiggers@google.com> Sender: fstests-owner@vger.kernel.org To: Theodore Ts'o Cc: fstests@vger.kernel.org, linux-mtd@lists.infradead.org, David Oberhollenzer , Eric Biggers List-ID: Hi Ted, are you interested in taking this UBIFS support patch into xfstests-bld now? The 'block2mtd' approach hasn't gotten any better from when I sent this patch out originally, but it's better than nothing (it's useful to me, at least). Also, xfstests itself supports UBIFS now, so only xfstests-bld support is missing. ---8<--- This patch adds UBIFS support to the xfstests-bld test runners (kvm-xfstests, gce-xfstests, etc.). Unlike most filesystems, UBIFS is not block-device based. Instead it uses an UBI volume, which is layered above an MTD (raw flash) device. Still, it's possible to use the block2mtd kernel module to emulate an MTD device given a block device. Therefore, the xfstests-bld config for UBIFS uses block2mtd to create MTD devices, then UBI devices and UBI volumes, that are backed by the xfstests partitions. This approach has some limitations. First, it takes a long time to 'ubiformat' the emulated MTD devices the first time UBIFS tests are run. Second, block2mtd doesn't support removing MTD devices, which prevents the underlying partitions from being reused to test other filesystems after UBIFS until the VM is rebooted. Still, it's better than having no way to test UBIFS. I also tried using QEMU to emulate a MTD device directly, but I couldn't get it to work; and that definitely won't work for gce-xfstests. Also, David Oberhollenzer had tried using nandsim instead of block2mtd, but said the following: "Modifying the xfstests-bld patch to use nandsim (which simulates a NAND flash MTD device) instead of block2mtd has been considered, however the default size of 128MiB is slightly too small for generic/129. Nandsim does not have an option to directly specify the size of the backing buffer but instead requires a set of NAND ID bytes that imply (among other things) the size of the chip (example, see 1). The ID bytes would have to be added to the kernel arguments for the UBIFS case. It might be desirable to document this somehow, for the next person who has to adjust the size, once a new test exhausts it. Also, it would be ultimately limted by available RAM and what can be encoded using the NAND ID bytes." Signed-off-by: Eric Biggers --- .../files/root/fs/ubifs/cfg/all.list | 1 + .../test-appliance/files/root/fs/ubifs/cfg/default | 11 ++ .../test-appliance/files/root/fs/ubifs/config | 180 +++++++++++++++++++++ kvm-xfstests/test-appliance/files/root/runtests.sh | 4 +- kvm-xfstests/test-appliance/gce-xfstests-bld.sh | 1 + kvm-xfstests/test-appliance/xfstests-packages | 1 + 6 files changed, 196 insertions(+), 2 deletions(-) create mode 100644 kvm-xfstests/test-appliance/files/root/fs/ubifs/cfg/all.list create mode 100644 kvm-xfstests/test-appliance/files/root/fs/ubifs/cfg/default create mode 100644 kvm-xfstests/test-appliance/files/root/fs/ubifs/config diff --git a/kvm-xfstests/test-appliance/files/root/fs/ubifs/cfg/all.list b/kvm-xfstests/test-appliance/files/root/fs/ubifs/cfg/all.list new file mode 100644 index 0000000..4ad96d5 --- /dev/null +++ b/kvm-xfstests/test-appliance/files/root/fs/ubifs/cfg/all.list @@ -0,0 +1 @@ +default diff --git a/kvm-xfstests/test-appliance/files/root/fs/ubifs/cfg/default b/kvm-xfstests/test-appliance/files/root/fs/ubifs/cfg/default new file mode 100644 index 0000000..be3ba67 --- /dev/null +++ b/kvm-xfstests/test-appliance/files/root/fs/ubifs/cfg/default @@ -0,0 +1,11 @@ +SIZE=small + +# set up UBI volumes for our block devices +export TEST_DEV=$(__blkdev_to_ubi_volume $SM_TST_DEV) +export TEST_DIR=$SM_TST_MNT +export SCRATCH_DEV=$(__blkdev_to_ubi_volume $SM_SCR_DEV) +export SCRATCH_MNT=$SM_SCR_MNT + +export MKFS_OPTIONS="" +export UBIFS_MOUNT_OPTIONS="" +TESTNAME="ubifs" diff --git a/kvm-xfstests/test-appliance/files/root/fs/ubifs/config b/kvm-xfstests/test-appliance/files/root/fs/ubifs/config new file mode 100644 index 0000000..3755e4d --- /dev/null +++ b/kvm-xfstests/test-appliance/files/root/fs/ubifs/config @@ -0,0 +1,180 @@ +# +# Configuration file for ubifs +# +# UBIFS is a filesystem for unmanaged flash memory devices, so it needs an +# emulation layer to use block devices. Currently we use 'blockmtd' to emulate +# MTD devices on top of the xfstests partitions, then make UBI devices and UBI +# volumes on top of them. This approach has some limitations (it takes a long +# time to 'ubiformat' the emulated MTD devices, and the partitions cannot be +# reused to test other filesystems until the VM is rebooted), but it's better +# than nothing. +# + +DEFAULT_MKFS_OPTIONS="" + +function check_filesystem() +{ + # there is no fsck.ubifs yet + : +} + +# Find the MTD device which is backed by the specified block device +function __mtd_find() +{ + local blkdev=$1 mtd_dir + + for mtd_dir in /sys/class/mtd/*; do + if [[ $mtd_dir =~ ^.*/mtd[0-9]+$ ]] && + [[ $(awk '/^block2mtd:/{print $2}' $mtd_dir/name) == $blkdev ]] + then + echo /dev/$(basename $mtd_dir) + return + fi + done +} + +# Find or create the MTD device which is backed by the specified block device +function __mtd_find_or_create() +{ + local blkdev=$1 mtd + + if [ ! -e /sys/module/block2mtd ]; then + echo 1>&2 "Error: CONFIG_MTD_BLOCK2MTD=y is required to emulate flash device for ubifs!" + return + fi + + mtd=$(__mtd_find $blkdev) + if [ ! -c "$mtd" ]; then + # Create a new block2mtd device. For now choose an eraseblock size of + # 128 KiB. I'm not sure if that's the best value or not. + echo "$blkdev,131072" > /sys/module/block2mtd/parameters/block2mtd + mtd=$(__mtd_find $blkdev) + fi + echo $mtd +} + +# Find the UBI device which has the specified mtd device attached +function __ubi_find() +{ + local mtd_num="${1#/dev/mtd}" ubi_dir + + for ubi_dir in /sys/class/ubi/*; do + if [[ $ubi_dir =~ ^.*/ubi[0-9]+$ ]] && + [[ $(<$ubi_dir/mtd_num) == $mtd_num ]] + then + echo /dev/$(basename $ubi_dir) + return + fi + done +} + +# Find or create the UBI device which has the specified mtd device attached +function __ubi_find_or_create() +{ + local mtd="$1" ubi + + ubi=$(__ubi_find $mtd) + if [ ! -c "$ubi" ]; then + if ! ubiattach -p $mtd &> /dev/null; then + # ubiattach didn't work; try formatting the MTD device first. + # Note: since this requires writing to the entire device, it may be + # *very* slow... + echo 1>&2 "Formatting $mtd with ubiformat (this may take a while!)..." + ubiformat -e 0 -y $mtd > /dev/null + ubiattach -p $mtd > /dev/null + fi + ubi=$(__ubi_find $mtd) + fi + echo $ubi +} + + +# +# Find or create the UBI volume backed by the specified block device. +# +# There are four types of devices in play here. Here's an example: +# +# /dev/vdb --- Block device +# /dev/mtd0 --- MTD device backed by /dev/vdb using block2mtd +# /dev/ubi0 --- UBI device to which /dev/mtd0 is attached +# /dev/ubi0_0 --- UBI volume within /dev/ubi0 +# +# In this example, this function would take in /dev/vdb as $1 and echo back +# /dev/ubi0_0, creating it and the two intermediary devices if needed. +# +function __blkdev_to_ubi_volume() +{ + local blkdev=$1 mtd ubi ubivol + + if [ ! -b "$blkdev" ]; then + echo 1>&2 "Error: block device \"$blkdev\" not found!" + return + fi + + mtd=$(__mtd_find_or_create $blkdev) + if [ ! -c "$mtd" ]; then + echo 1>&2 "Error: Failed to create MTD device from $blkdev!" + return + fi + + ubi=$(__ubi_find_or_create $mtd) + if [ ! -c "$ubi" ]; then + echo 1>&2 "Error: Failed create UBI device from $mtd!" + return + fi + + ubivol=${ubi}_0 + if [ ! -c "$ubivol" ]; then + ubimkvol $ubi -N vol -m > /dev/null + if [ ! -c "$ubivol" ]; then + echo 1>&2 "Error: Failed to create UBI volume $ubivol from $ubi" + return + fi + fi + echo $ubivol +} + +function format_filesystem() +{ + local dev="$1" + local opts="$2" + + mkfs.ubifs -y $opts "$dev" +} + +function setup_mount_opts() +{ + if test -n "$MNTOPTS" ; then + if test -n "$UBIFS_MOUNT_OPTIONS" ; then + UBIFS_MOUNT_OPTIONS="$UBIFS_MOUNT_OPTIONS,$MNTOPTS" + else + UBIFS_MOUNT_OPTIONS="-o $MNTOPTS" + fi + fi +} + +function get_mkfs_opts() +{ + echo "$MKFS_OPTIONS" +} + +function show_mkfs_opts() +{ + echo MKFS_OPTIONS: "$MKFS_OPTIONS" +} + +function show_mount_opts() +{ + echo UBIFS_MOUNT_OPTIONS: "$UBIFS_MOUNT_OPTIONS" +} + +function test_name_alias() +{ + echo "$1" +} + +function reset_vars() +{ + unset UBIFS_MOUNT_OPTIONS + unset MKFS_OPTIONS +} diff --git a/kvm-xfstests/test-appliance/files/root/runtests.sh b/kvm-xfstests/test-appliance/files/root/runtests.sh index bf237e8..a44f389 100755 --- a/kvm-xfstests/test-appliance/files/root/runtests.sh +++ b/kvm-xfstests/test-appliance/files/root/runtests.sh @@ -285,11 +285,11 @@ do */ovl) ;; *:/*) ;; *) - if ! test -b $TEST_DEV ; then + if ! [ -b $TEST_DEV -o -c $TEST_DEV ]; then echo "Test device $TEST_DEV does not exist, skipping $i config" continue fi - if ! test -b $SCRATCH_DEV ; then + if ! [ -b $SCRATCH_DEV -o -c $SCRATCH_DEV ]; then echo "Scratch device $SCRATCH_DEV does not exist, skipping $i config" continue fi diff --git a/kvm-xfstests/test-appliance/gce-xfstests-bld.sh b/kvm-xfstests/test-appliance/gce-xfstests-bld.sh index 6127e4a..a7ad6e9 100644 --- a/kvm-xfstests/test-appliance/gce-xfstests-bld.sh +++ b/kvm-xfstests/test-appliance/gce-xfstests-bld.sh @@ -43,6 +43,7 @@ PACKAGES="bash-completion \ liblzo2-2 \ lighttpd \ lvm2 \ + mtd-utils \ nano \ openssl \ perl \ diff --git a/kvm-xfstests/test-appliance/xfstests-packages b/kvm-xfstests/test-appliance/xfstests-packages index b0fc878..aa1d2e8 100644 --- a/kvm-xfstests/test-appliance/xfstests-packages +++ b/kvm-xfstests/test-appliance/xfstests-packages @@ -22,6 +22,7 @@ liblzo2-2 libbsd0 lvm2 makedev +mtd-utils perl procps psmisc -- 2.15.1.504.g5279b80103-goog