From mboxrd@z Thu Jan 1 00:00:00 1970 From: Miquel Raynal Subject: [PATCH v3 09/11] thermal: armada: Wait sensors validity before exiting the init callback Date: Thu, 14 Dec 2017 11:30:09 +0100 Message-ID: <20171214103011.24713-10-miquel.raynal@free-electrons.com> References: <20171214103011.24713-1-miquel.raynal@free-electrons.com> Return-path: In-Reply-To: <20171214103011.24713-1-miquel.raynal@free-electrons.com> Sender: linux-pm-owner@vger.kernel.org To: Zhang Rui , Eduardo Valentin , Rob Herring , Mark Rutland , Jason Cooper , Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Catalin Marinas , Will Deacon Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Thomas Petazzoni , Antoine Tenart , Nadav Haklai , Miquel Raynal , Baruch Siach , David Sniatkiwicz List-Id: devicetree@vger.kernel.org The thermal core will check for sensors validity right after the initialization callback has returned. As the initialization routine make a reset, the sensors are not ready immediately and the core spawns an error in the dmesg. Avoid this annoying situation by polling on the validity bit before exiting from these routines. This also avoid the use of blind sleeps. Suggested-by: David Sniatkiwicz Signed-off-by: Miquel Raynal --- drivers/thermal/armada_thermal.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index be141ca53e83..1c4122f7377c 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -23,6 +23,7 @@ #include #include #include +#include /* Thermal Manager Control and Status Register */ #define PMU_TDC0_SW_RST_MASK (0x1 << 1) @@ -59,6 +60,9 @@ #define CONTROL1_EXT_TSEN_SW_RESET BIT(7) #define CONTROL1_EXT_TSEN_HW_RESETn BIT(8) +#define STATUS_POLL_PERIOD_US 1000 +#define STATUS_POLL_TIMEOUT_US 100000 + struct armada_thermal_data; /* Marvell EBU Thermal Sensor Dev Structure */ @@ -154,6 +158,16 @@ static void armada375_init_sensor(struct platform_device *pdev, msleep(50); } +static void armada_wait_sensor_validity(struct armada_thermal_priv *priv) +{ + u32 reg; + + readl_relaxed_poll_timeout(priv->status, reg, + reg & priv->data->is_valid_bit, + STATUS_POLL_PERIOD_US, + STATUS_POLL_TIMEOUT_US); +} + static void armada380_init_sensor(struct platform_device *pdev, struct armada_thermal_priv *priv) { @@ -163,7 +177,6 @@ static void armada380_init_sensor(struct platform_device *pdev, reg |= CONTROL1_EXT_TSEN_HW_RESETn; reg &= ~CONTROL1_EXT_TSEN_SW_RESET; writel(reg, priv->control1); - msleep(10); /* Set Tsen Tc Trim to correct default value (errata #132698) */ if (priv->control0) { @@ -171,8 +184,10 @@ static void armada380_init_sensor(struct platform_device *pdev, reg &= ~CONTROL0_TSEN_TC_TRIM_MASK; reg |= CONTROL0_TSEN_TC_TRIM_VAL; writel(reg, priv->control0); - msleep(10); } + + /* Wait the sensors to be valid or the core will warn the user */ + armada_wait_sensor_validity(priv); } static void armada_ap806_init_sensor(struct platform_device *pdev, @@ -190,7 +205,9 @@ static void armada_ap806_init_sensor(struct platform_device *pdev, reg &= ~CONTROL0_TSEN_RESET; reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_ENABLE; writel(reg, priv->control0); - msleep(10); + + /* Wait the sensors to be valid or the core will warn the user */ + armada_wait_sensor_validity(priv); } static bool armada_is_valid(struct armada_thermal_priv *priv) -- 2.11.0 From mboxrd@z Thu Jan 1 00:00:00 1970 From: miquel.raynal@free-electrons.com (Miquel Raynal) Date: Thu, 14 Dec 2017 11:30:09 +0100 Subject: [PATCH v3 09/11] thermal: armada: Wait sensors validity before exiting the init callback In-Reply-To: <20171214103011.24713-1-miquel.raynal@free-electrons.com> References: <20171214103011.24713-1-miquel.raynal@free-electrons.com> Message-ID: <20171214103011.24713-10-miquel.raynal@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The thermal core will check for sensors validity right after the initialization callback has returned. As the initialization routine make a reset, the sensors are not ready immediately and the core spawns an error in the dmesg. Avoid this annoying situation by polling on the validity bit before exiting from these routines. This also avoid the use of blind sleeps. Suggested-by: David Sniatkiwicz Signed-off-by: Miquel Raynal --- drivers/thermal/armada_thermal.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index be141ca53e83..1c4122f7377c 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -23,6 +23,7 @@ #include #include #include +#include /* Thermal Manager Control and Status Register */ #define PMU_TDC0_SW_RST_MASK (0x1 << 1) @@ -59,6 +60,9 @@ #define CONTROL1_EXT_TSEN_SW_RESET BIT(7) #define CONTROL1_EXT_TSEN_HW_RESETn BIT(8) +#define STATUS_POLL_PERIOD_US 1000 +#define STATUS_POLL_TIMEOUT_US 100000 + struct armada_thermal_data; /* Marvell EBU Thermal Sensor Dev Structure */ @@ -154,6 +158,16 @@ static void armada375_init_sensor(struct platform_device *pdev, msleep(50); } +static void armada_wait_sensor_validity(struct armada_thermal_priv *priv) +{ + u32 reg; + + readl_relaxed_poll_timeout(priv->status, reg, + reg & priv->data->is_valid_bit, + STATUS_POLL_PERIOD_US, + STATUS_POLL_TIMEOUT_US); +} + static void armada380_init_sensor(struct platform_device *pdev, struct armada_thermal_priv *priv) { @@ -163,7 +177,6 @@ static void armada380_init_sensor(struct platform_device *pdev, reg |= CONTROL1_EXT_TSEN_HW_RESETn; reg &= ~CONTROL1_EXT_TSEN_SW_RESET; writel(reg, priv->control1); - msleep(10); /* Set Tsen Tc Trim to correct default value (errata #132698) */ if (priv->control0) { @@ -171,8 +184,10 @@ static void armada380_init_sensor(struct platform_device *pdev, reg &= ~CONTROL0_TSEN_TC_TRIM_MASK; reg |= CONTROL0_TSEN_TC_TRIM_VAL; writel(reg, priv->control0); - msleep(10); } + + /* Wait the sensors to be valid or the core will warn the user */ + armada_wait_sensor_validity(priv); } static void armada_ap806_init_sensor(struct platform_device *pdev, @@ -190,7 +205,9 @@ static void armada_ap806_init_sensor(struct platform_device *pdev, reg &= ~CONTROL0_TSEN_RESET; reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_ENABLE; writel(reg, priv->control0); - msleep(10); + + /* Wait the sensors to be valid or the core will warn the user */ + armada_wait_sensor_validity(priv); } static bool armada_is_valid(struct armada_thermal_priv *priv) -- 2.11.0