From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: "Sean Nyekjær" <sean.nyekjaer@prevas.dk>
Cc: Miquel RAYNAL <miquel.raynal@free-electrons.com>,
<ezequiel.garcia@free-electrons.com>,
<linux-mtd@lists.infradead.org>,
"Kasper Revsbech (KREV)" <krev@triax.com>
Subject: Re: [BUG] pxa3xx: wait time out when scanning for bb
Date: Mon, 18 Dec 2017 11:45:46 +0100 [thread overview]
Message-ID: <20171218114546.67d0b44f@bbrezillon> (raw)
In-Reply-To: <d6dce58e-49e5-3a21-2e37-415ec7b0cb95@prevas.dk>
Hi Sean,
On Mon, 18 Dec 2017 11:26:29 +0100
Sean Nyekjær <sean.nyekjaer@prevas.dk> wrote:
> Hi Miquel
>
> > Ok that should be fine!
> >
> > I have added another fix just now for the same problem on write side.
> >
> > I did not spot all of that because I only worked with NAND chips
> > bigger than 2k, where read/writes are split.
> >
> > Thank you very much for your time.
> You are welcome :-)
> You could add me as a Tested-By ;-)
>
> Will this be ready for 4.16?
If no one is complaining about regressions with the new driver, then
yes, it will be queued to the nand/next branch targeting 4.16.
> What would you recommend, running with these patches
> on top af 4.14 LTS or just stick with the pxa3xx driver?
Depends whether the old driver works fine on your board or not.
Backporting is likely to be painful because of the ->exec_op()
infrastructure which was introduced recently, but if it solves issues
you had with the old driver, then it's worth it.
Regards,
Boris
next prev parent reply other threads:[~2017-12-18 10:46 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-28 9:12 [BUG] pxa3xx: wait time out when scanning for bb Sean Nyekjær
2017-11-28 13:02 ` Miquel RAYNAL
2017-11-28 13:12 ` Sean Nyekjær
2017-11-28 13:30 ` Miquel RAYNAL
2017-11-28 13:42 ` Sean Nyekjær
2017-11-28 14:04 ` Miquel RAYNAL
2017-11-29 7:14 ` Sean Nyekjær
2017-11-29 8:03 ` Miquel RAYNAL
2017-11-30 12:00 ` Sean Nyekjær
2017-11-30 17:18 ` Miquel RAYNAL
2017-11-30 18:13 ` Sean Nyekjær
2017-12-01 8:15 ` Miquel RAYNAL
2017-12-01 8:54 ` Sean Nyekjær
2017-12-07 20:38 ` Miquel RAYNAL
2017-12-08 9:04 ` Sean Nyekjær
2017-12-08 9:21 ` Miquel RAYNAL
2017-12-11 8:25 ` Sean Nyekjær
2017-12-11 8:45 ` Sean Nyekjær
2017-12-11 9:53 ` Miquel RAYNAL
2017-12-11 10:20 ` Sean Nyekjær
2017-12-11 11:35 ` Sean Nyekjær
2017-12-11 13:22 ` Sean Nyekjær
2017-12-11 14:02 ` Miquel RAYNAL
2017-12-11 14:09 ` Miquel RAYNAL
2017-12-11 14:49 ` Boris Brezillon
2017-12-12 8:44 ` Sean Nyekjær
2017-12-12 8:51 ` Miquel RAYNAL
2017-12-12 8:56 ` Sean Nyekjær
2017-12-12 10:12 ` Miquel RAYNAL
2017-12-12 10:55 ` Sean Nyekjær
2017-12-12 11:08 ` Miquel RAYNAL
2017-12-12 11:28 ` Sean Nyekjær
2017-12-12 11:35 ` Miquel RAYNAL
2017-12-12 11:49 ` Sean Nyekjær
2017-12-12 12:47 ` Miquel RAYNAL
2017-12-12 13:09 ` Sean Nyekjær
2017-12-12 13:35 ` Miquel RAYNAL
2017-12-12 18:10 ` Sean Nyekjær
2017-12-12 18:23 ` Miquel RAYNAL
2017-12-13 6:25 ` Sean Nyekjær
2017-12-13 8:41 ` Miquel RAYNAL
2017-12-13 9:31 ` Sean Nyekjær
2017-12-15 17:25 ` Miquel RAYNAL
2017-12-15 18:56 ` Sean Nyekjær
2017-12-15 19:19 ` Miquel RAYNAL
2017-12-17 11:56 ` Sean Nyekjaer
2017-12-17 13:19 ` Boris Brezillon
2017-12-17 21:47 ` Sean Nyekjaer
2017-12-17 22:00 ` Boris Brezillon
2017-12-17 22:15 ` [SPAM] " Sean Nyekjær
2017-12-17 22:19 ` Boris Brezillon
2017-12-17 22:19 ` Miquel RAYNAL
2017-12-18 6:23 ` Sean Nyekjær
2017-12-18 8:56 ` Miquel RAYNAL
2017-12-18 9:26 ` Sean Nyekjær
2017-12-18 9:35 ` Miquel RAYNAL
2017-12-18 10:12 ` Sean Nyekjær
2017-12-18 10:19 ` Miquel RAYNAL
2017-12-18 10:26 ` Sean Nyekjær
2017-12-18 10:45 ` Boris Brezillon [this message]
2017-12-18 10:48 ` Sean Nyekjær
2017-12-18 12:43 ` Boris Brezillon
2017-12-18 8:57 ` [SPAM] " Boris Brezillon
2017-12-17 13:48 ` Boris Brezillon
2017-12-11 20:11 ` Miquel RAYNAL
2017-12-09 23:18 ` Ezequiel Garcia
2017-12-10 14:17 ` Miquel RAYNAL
2017-12-11 12:30 ` Ezequiel Garcia
2017-12-11 13:13 ` Miquel RAYNAL
2017-12-11 16:08 ` Ezequiel Garcia
2017-12-11 16:41 ` Miquel RAYNAL
[not found] ` <CAL92e2W7fLjVOWFgH2PpRLRP7Tf5L1vta0jduWm+bTVm647MNQ@mail.gmail.com>
2017-12-11 16:24 ` Ezequiel Garcia
2017-12-11 16:45 ` Boris Brezillon
2017-12-11 21:16 ` Boris Brezillon
2017-12-12 6:01 ` Greg Cook
2017-12-12 7:09 ` Ezequiel Garcia
2017-12-12 7:30 ` Greg Cook
2017-12-12 8:15 ` Boris Brezillon
2017-12-12 16:22 ` Ezequiel Garcia
2017-12-12 6:36 ` Sean Nyekjær
2017-12-12 6:50 ` Ezequiel Garcia
2017-12-12 7:17 ` Greg Cook
2017-12-09 23:04 ` Ezequiel Garcia
2017-12-09 23:22 ` Ezequiel Garcia
2017-12-09 23:24 ` Ezequiel Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171218114546.67d0b44f@bbrezillon \
--to=boris.brezillon@free-electrons.com \
--cc=ezequiel.garcia@free-electrons.com \
--cc=krev@triax.com \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@free-electrons.com \
--cc=sean.nyekjaer@prevas.dk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.