[Qemu-devel] [PATCH v4 08/14] i.MX: Add implementation of i.MX7 GPR IP block

[Andrey Smirnov <andrew.smirnov@gmail.com>]

Add minimal code needed to allow upstream Linux guest to boot.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 hw/misc/Makefile.objs      |   1 +
 hw/misc/imx7_gpr.c         | 119 +++++++++++++++++++++++++++++++++++++++++++++
 include/hw/misc/imx7_gpr.h |  28 +++++++++++
 3 files changed, 148 insertions(+)
 create mode 100644 hw/misc/imx7_gpr.c
 create mode 100644 include/hw/misc/imx7_gpr.h

diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index 019886912c..fce426eb75 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -36,6 +36,7 @@ obj-$(CONFIG_IMX) += imx6_src.o
 obj-$(CONFIG_IMX) += imx7_ccm.o
 obj-$(CONFIG_IMX) += imx2_wdt.o
 obj-$(CONFIG_IMX) += imx7_snvs.o
+obj-$(CONFIG_IMX) += imx7_gpr.o
 obj-$(CONFIG_MILKYMIST) += milkymist-hpdmc.o
 obj-$(CONFIG_MILKYMIST) += milkymist-pfpu.o
 obj-$(CONFIG_MAINSTONE) += mst_fpga.o
diff --git a/hw/misc/imx7_gpr.c b/hw/misc/imx7_gpr.c
new file mode 100644
index 0000000000..9e8ccea9e8
--- /dev/null
+++ b/hw/misc/imx7_gpr.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2017, Impinj, Inc.
+ *
+ * i.MX7 GPR IP block emulation code
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * Bare minimum emulation code needed to support being able to shut
+ * down linux guest gracefully.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/misc/imx7_gpr.h"
+#include "qemu/log.h"
+#include "sysemu/sysemu.h"
+
+enum IMX7GPRRegisters {
+    IOMUXC_GPR0  = 0x00,
+    IOMUXC_GPR1  = 0x04,
+    IOMUXC_GPR2  = 0x08,
+    IOMUXC_GPR3  = 0x0c,
+    IOMUXC_GPR4  = 0x10,
+    IOMUXC_GPR5  = 0x14,
+    IOMUXC_GPR6  = 0x18,
+    IOMUXC_GPR7  = 0x1c,
+    IOMUXC_GPR8  = 0x20,
+    IOMUXC_GPR9  = 0x24,
+    IOMUXC_GPR10 = 0x28,
+    IOMUXC_GPR11 = 0x2c,
+    IOMUXC_GPR12 = 0x30,
+    IOMUXC_GPR13 = 0x34,
+    IOMUXC_GPR14 = 0x38,
+    IOMUXC_GPR15 = 0x3c,
+    IOMUXC_GPR16 = 0x40,
+    IOMUXC_GPR17 = 0x44,
+    IOMUXC_GPR18 = 0x48,
+    IOMUXC_GPR19 = 0x4c,
+    IOMUXC_GPR20 = 0x50,
+    IOMUXC_GPR21 = 0x54,
+    IOMUXC_GPR22 = 0x58,
+};
+
+#define IMX7D_GPR1_IRQ_MASK                 BIT(12)
+#define IMX7D_GPR1_ENET1_TX_CLK_SEL_MASK    BIT(13)
+#define IMX7D_GPR1_ENET2_TX_CLK_SEL_MASK    BIT(14)
+#define IMX7D_GPR1_ENET_TX_CLK_SEL_MASK     (0x3 << 13)
+#define IMX7D_GPR1_ENET1_CLK_DIR_MASK       BIT(17)
+#define IMX7D_GPR1_ENET2_CLK_DIR_MASK       BIT(18)
+#define IMX7D_GPR1_ENET_CLK_DIR_MASK        (0x3 << 17)
+
+#define IMX7D_GPR5_CSI_MUX_CONTROL_MIPI     BIT(4)
+#define IMX7D_GPR12_PCIE_PHY_REFCLK_SEL     BIT(5)
+#define IMX7D_GPR22_PCIE_PHY_PLL_LOCKED     BIT(31)
+
+
+static uint64_t imx7_gpr_read(void *opaque, hwaddr offset, unsigned size)
+{
+    if (offset == IOMUXC_GPR22) {
+        return IMX7D_GPR22_PCIE_PHY_PLL_LOCKED;
+    }
+
+    return 0;
+}
+
+static void imx7_gpr_write(void *opaque, hwaddr offset,
+                           uint64_t v, unsigned size)
+{
+}
+
+static const struct MemoryRegionOps imx7_gpr_ops = {
+    .read = imx7_gpr_read,
+    .write = imx7_gpr_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .impl = {
+        /*
+         * Our device would not work correctly if the guest was doing
+         * unaligned access. This might not be a limitation on the
+         * real device but in practice there is no reason for a guest
+         * to access this device unaligned.
+         */
+        .min_access_size = 4,
+        .max_access_size = 4,
+        .unaligned = false,
+    },
+};
+
+static void imx7_gpr_init(Object *obj)
+{
+    SysBusDevice *sd = SYS_BUS_DEVICE(obj);
+    IMX7GPRState *s = IMX7_GPR(obj);
+
+    memory_region_init_io(&s->mmio, obj, &imx7_gpr_ops, s,
+                          TYPE_IMX7_GPR, 64 * 1024);
+    sysbus_init_mmio(sd, &s->mmio);
+}
+
+static void imx7_gpr_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc  = "i.MX7 General Purpose Registers Module";
+}
+
+static const TypeInfo imx7_gpr_info = {
+    .name          = TYPE_IMX7_GPR,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(IMX7GPRState),
+    .instance_init = imx7_gpr_init,
+    .class_init    = imx7_gpr_class_init,
+};
+
+static void imx7_gpr_register_type(void)
+{
+    type_register_static(&imx7_gpr_info);
+}
+type_init(imx7_gpr_register_type)
diff --git a/include/hw/misc/imx7_gpr.h b/include/hw/misc/imx7_gpr.h
new file mode 100644
index 0000000000..e19373d274
--- /dev/null
+++ b/include/hw/misc/imx7_gpr.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2017, Impinj, Inc.
+ *
+ * i.MX7 GPR IP block emulation code
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef IMX7_GPR_H
+#define IMX7_GPR_H
+
+#include "qemu/bitops.h"
+#include "hw/sysbus.h"
+
+#define TYPE_IMX7_GPR "imx7.gpr"
+#define IMX7_GPR(obj) OBJECT_CHECK(IMX7GPRState, (obj), TYPE_IMX7_GPR)
+
+typedef struct IMX7GPRState {
+    /* <private> */
+    SysBusDevice parent_obj;
+
+    MemoryRegion mmio;
+} IMX7GPRState;
+
+#endif /* IMX7_GPR_H */
-- 
2.14.3