All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Graf <agraf@suse.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 10/15] pl011: Convert CONFIG_PL011_SERIAL to Kconfig
Date: Thu, 25 Jan 2018 12:05:51 +0100	[thread overview]
Message-ID: <20180125110556.76352-11-agraf@suse.de> (raw)
In-Reply-To: <20180125110556.76352-1-agraf@suse.de>

We want to use Kconfig logic to depend on whether pl01x devices
are built in, so let's convert their inclusion selection to Kconfig.

This round goes to pl011.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/arm/Kconfig                  | 19 +++++++++++++++++++
 drivers/serial/Kconfig            |  6 ++++++
 include/configs/highbank.h        |  1 -
 include/configs/mxs.h             |  1 -
 include/configs/spear-common.h    |  1 -
 include/configs/vexpress_aemv8a.h |  1 -
 include/configs/vexpress_common.h |  1 -
 include/configs/x600.h            |  1 -
 scripts/config_whitelist.txt      |  1 -
 9 files changed, 25 insertions(+), 7 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 97b8249432..1557e7cfdf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -400,49 +400,58 @@ config TARGET_APX4DEVKIT
 	bool "Support apx4devkit"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select PL011_SERIAL
 
 config TARGET_XFI3
 	bool "Support xfi3"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select PL011_SERIAL
 
 config TARGET_M28EVK
 	bool "Support m28evk"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select PL011_SERIAL
 
 config TARGET_MX23EVK
 	bool "Support mx23evk"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
 	select BOARD_EARLY_INIT_F
+	select PL011_SERIAL
 
 config TARGET_MX28EVK
 	bool "Support mx28evk"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
 	select BOARD_EARLY_INIT_F
+	select PL011_SERIAL
 
 config TARGET_MX23_OLINUXINO
 	bool "Support mx23_olinuxino"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
 	select BOARD_EARLY_INIT_F
+	select PL011_SERIAL
 
 config TARGET_BG0900
 	bool "Support bg0900"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select PL011_SERIAL
 
 config TARGET_SANSA_FUZE_PLUS
 	bool "Support sansa_fuze_plus"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select PL011_SERIAL
 
 config TARGET_SC_SPS_1
 	bool "Support sc_sps_1"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select PL011_SERIAL
 
 config ORION5X
 	bool "Marvell Orion"
@@ -453,24 +462,28 @@ config TARGET_SPEAR300
 	select CPU_ARM926EJS
 	select BOARD_EARLY_INIT_F
 	imply CMD_SAVES
+	select PL011_SERIAL
 
 config TARGET_SPEAR310
 	bool "Support spear310"
 	select CPU_ARM926EJS
 	select BOARD_EARLY_INIT_F
 	imply CMD_SAVES
+	select PL011_SERIAL
 
 config TARGET_SPEAR320
 	bool "Support spear320"
 	select CPU_ARM926EJS
 	select BOARD_EARLY_INIT_F
 	imply CMD_SAVES
+	select PL011_SERIAL
 
 config TARGET_SPEAR600
 	bool "Support spear600"
 	select CPU_ARM926EJS
 	select BOARD_EARLY_INIT_F
 	imply CMD_SAVES
+	select PL011_SERIAL
 
 config TARGET_STV0991
 	bool "Support stv0991"
@@ -486,6 +499,7 @@ config TARGET_X600
 	select BOARD_LATE_INIT
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select PL011_SERIAL
 
 config TARGET_IMX31_PHYCORE
 	bool "Support imx31_phycore_eet"
@@ -541,14 +555,17 @@ config TARGET_VEXPRESS_CA15_TC2
 	select CPU_V7
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
+	select PL011_SERIAL
 
 config TARGET_VEXPRESS_CA5X2
 	bool "Support vexpress_ca5x2"
 	select CPU_V7
+	select PL011_SERIAL
 
 config TARGET_VEXPRESS_CA9X4
 	bool "Support vexpress_ca9x4"
 	select CPU_V7
+	select PL011_SERIAL
 
 config TARGET_BCM23550_W1D
 	bool "Support bcm23550_w1d"
@@ -607,6 +624,7 @@ config ARCH_S5PC1XX
 config ARCH_HIGHBANK
 	bool "Calxeda Highbank"
 	select CPU_V7
+	select PL011_SERIAL
 
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
@@ -761,6 +779,7 @@ config TARGET_TS4600
 	bool "Support TS4600"
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
+	select PL011_SERIAL
 
 config ARCH_VF610
 	bool "Freescale Vybrid"
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 2816121dec..99aa817e63 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -453,6 +453,12 @@ config PL010_SERIAL
 	help
 	  Select this to enable a UART for platforms using PL010.
 
+config PL011_SERIAL
+	bool "ARM PL011 driver"
+	depends on !DM_SERIAL
+	help
+	  Select this to enable a UART for platforms using PL011.
+
 config ROCKCHIP_SERIAL
 	bool "Rockchip on-chip UART support"
 	depends on DM_SERIAL && SPL_OF_PLATDATA
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index a5a524008b..726ae8a214 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -22,7 +22,6 @@
  */
 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
 
-#define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK		150000000
 #define CONFIG_PL01x_PORTS		{ (void *)(0xFFF36000) }
 #define CONFIG_CONS_INDEX		0
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 804b9e199c..3a27c15060 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -108,7 +108,6 @@
  * DUART Serial Driver.
  * Conflicts with AUART driver which can be set by board.
  */
-#define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK		24000000
 #define CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
 #define CONFIG_CONS_INDEX		0
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index 349232e1bf..c123e44d15 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -76,7 +76,6 @@
  * Serial Configuration (PL011)
  * CONFIG_PL01x_PORTS is defined in specific files
  */
-#define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK			(48 * 1000 * 1000)
 #define CONFIG_CONS_INDEX			0
 #define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, \
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index 6203e14135..f18e2ee068 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -111,7 +111,6 @@
 /* PL011 Serial Configuration */
 #define CONFIG_CONS_INDEX		0
 #define CONFIG_PL01X_SERIAL
-#define CONFIG_PL011_SERIAL
 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 #define CONFIG_PL011_CLOCK		7273800
 #else
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 294ca18186..94a352fef7 100644
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -133,7 +133,6 @@
 #define CONFIG_SYS_TIMER_COUNTS_DOWN
 
 /* PL011 Serial Configuration */
-#define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK		24000000
 #define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
 					 (void *)CONFIG_SYS_SERIAL1}
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 7363057a5c..9990890a9a 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -38,7 +38,6 @@
 #define CONFIG_SYS_SERIAL1			0xD0080000
 #define CONFIG_PL01x_PORTS			{ (void *)CONFIG_SYS_SERIAL0, \
 						(void *)CONFIG_SYS_SERIAL1 }
-#define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK			(48 * 1000 * 1000)
 #define CONFIG_CONS_INDEX			0
 #define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, \
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 5ee6b07c6d..a4159ebb36 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1627,7 +1627,6 @@ CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI
 CONFIG_PIXIS_BRDCFG1_TDM
 CONFIG_PIXIS_SGMII_CMD
 CONFIG_PL011_CLOCK
-CONFIG_PL011_SERIAL
 CONFIG_PL011_SERIAL_RLCR
 CONFIG_PL01X_SERIAL
 CONFIG_PL01x_PORTS
-- 
2.12.3

  parent reply	other threads:[~2018-01-25 11:05 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-25 11:05 [U-Boot] [PATCH v3 00/15] RPi: Properly handle dynamic serial configuration Alexander Graf
2018-01-25 11:05 ` [U-Boot] [PATCH v3 01/15] serial: Use next serial device if probing fails Alexander Graf
2018-01-28 18:54   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-29  3:27     ` Derald D. Woods
2018-01-29 10:17       ` Alexander Graf
2018-01-29 22:40       ` Alexander Graf
2018-01-25 11:05 ` [U-Boot] [PATCH v3 02/15] rpi: Remove runtime disabling support for serial Alexander Graf
2018-01-28 18:54   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 03/15] serial: bcm283x_mu: Remove support for post-init disabling Alexander Graf
2018-01-28 18:54   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 04/15] rpi: Determine PL011/Mini-UART availability at runtime Alexander Graf
2018-01-28 18:55   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 05/15] serial_bcm283x_mu: Convert to dev_read Alexander Graf
2018-01-28 18:55   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 06/15] serial_bcm283x_mu: Always skip init Alexander Graf
2018-01-28 18:55   ` [U-Boot] [U-Boot,v3,06/15] " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 07/15] serial_bcm283x_mu: Fail loading if not muxed Alexander Graf
2018-01-28 18:55   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 08/15] pl01x: Convert to dev_read Alexander Graf
2018-01-28 18:55   ` [U-Boot] [U-Boot,v3,08/15] " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 09/15] pl010: Convert CONFIG_PL010_SERIAL to Kconfig Alexander Graf
2018-01-28 18:55   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` Alexander Graf [this message]
2018-01-28 18:55   ` [U-Boot] [U-Boot, v3, 10/15] pl011: Convert CONFIG_PL011_SERIAL " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 11/15] pl01x: Convert CONFIG_PL01X_SERIAL " Alexander Graf
2018-01-28 18:55   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 12/15] bcm2835_mu_serial: Convert " Alexander Graf
2018-01-28 18:55   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 13/15] MAINTAINERS: Take over BCM2835 maintainership Alexander Graf
2018-01-28 18:55   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-31  8:34   ` [U-Boot] [PATCH v3 " Wolfgang Denk
2018-01-31  8:52     ` Alexander Graf
2018-01-31 13:04       ` Wolfgang Denk
2018-01-25 11:05 ` [U-Boot] [PATCH v3 14/15] bcm2835_pl011_serial: Add BCM2835 specific serial driver Alexander Graf
2018-01-28 18:55   ` [U-Boot] [U-Boot, v3, " Tom Rini
2018-01-25 11:05 ` [U-Boot] [PATCH v3 15/15] bcm2835_pinctrl: Probe pre-reloc Alexander Graf
2018-01-28 18:55   ` [U-Boot] [U-Boot,v3,15/15] " Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180125110556.76352-11-agraf@suse.de \
    --to=agraf@suse.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.