From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mario Six Date: Fri, 26 Jan 2018 14:43:39 +0100 Subject: [U-Boot] [PATCH v3 09/26] cfi_flash: Fix logical continuations In-Reply-To: <20180126134356.9393-1-mario.six@gdsys.cc> References: <20180126134356.9393-1-mario.six@gdsys.cc> Message-ID: <20180126134356.9393-9-mario.six@gdsys.cc> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de When splitting long logical statements across multiple lines, the logical operators should be at the end of the lines. Fix all instances where this occurs. Signed-off-by: Mario Six --- v2 -> v3: * Added proper commit message v1 -> v2: None --- drivers/mtd/cfi_flash.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index e2469055b8..eebd641e36 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -611,8 +611,8 @@ static int flash_full_status_check(flash_info_t *info, flash_sect_t sector, case CFI_CMDSET_INTEL_PROG_REGIONS: case CFI_CMDSET_INTEL_EXTENDED: case CFI_CMDSET_INTEL_STANDARD: - if ((retcode == ERR_OK) - && !flash_isset(info, sector, 0, FLASH_STATUS_DONE)) { + if ((retcode == ERR_OK) && + !flash_isset(info, sector, 0, FLASH_STATUS_DONE)) { retcode = ERR_INVAL; printf("Flash %s error at address %lx\n", prompt, info->start[sector]); @@ -761,8 +761,8 @@ static flash_sect_t find_sector(flash_info_t *info, ulong addr) if ((info != saved_info) || (sector >= info->sector_count)) sector = 0; - while ((info->start[sector] < addr) - && (sector < info->sector_count - 1)) + while ((info->start[sector] < addr) && + (sector < info->sector_count - 1)) sector++; while ((info->start[sector] > addr) && (sector > 0)) /* @@ -1435,8 +1435,8 @@ static inline int manufact_match(flash_info_t *info, u32 manu) static int cfi_protect_bugfix(flash_info_t *info, long sector, int prot) { - if (manufact_match(info, INTEL_MANUFACT) - && info->device_id == NUMONYX_256MBIT) { + if (manufact_match(info, INTEL_MANUFACT) && + info->device_id == NUMONYX_256MBIT) { /* * see errata called * "Numonyx Axcell P33/P30 Specification Update" :) @@ -1807,8 +1807,8 @@ static int flash_detect_legacy(phys_addr_t base, int banknum) (ulong)map_physmem(base, info->portwidth, MAP_NOCACHE); - if (info->portwidth == FLASH_CFI_8BIT - && info->interface == FLASH_CFI_X8X16) { + if (info->portwidth == FLASH_CFI_8BIT && + info->interface == FLASH_CFI_X8X16) { info->addr_unlock1 = 0x2AAA; info->addr_unlock2 = 0x5555; } else { @@ -1892,9 +1892,9 @@ static int __flash_detect_cfi(flash_info_t *info, struct cfi_qry *qry) cfi_offset++) { flash_write_cmd(info, 0, flash_offset_cfi[cfi_offset], FLASH_CMD_CFI); - if (flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP, 'Q') - && flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') - && flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) { + if (flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP, 'Q') && + flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') && + flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) { flash_read_cfi(info, qry, FLASH_OFFSET_CFI_RESP, sizeof(struct cfi_qry)); info->interface = le16_to_cpu(qry->interface_desc); @@ -2144,8 +2144,8 @@ ulong flash_get_size(phys_addr_t base, int banknum) size_ratio = info->portwidth / info->chipwidth; /* if the chip is x8/x16 reduce the ratio by half */ - if ((info->interface == FLASH_CFI_X8X16) - && (info->chipwidth == FLASH_CFI_BY8)) { + if ((info->interface == FLASH_CFI_X8X16) && + (info->chipwidth == FLASH_CFI_BY8)) { size_ratio >>= 1; } debug("size_ratio %d port %d bits chip %d bits\n", -- 2.11.0