All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Chen <hzpeterchen@gmail.com>
To: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Peter Chen <Peter.Chen@nxp.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Ian Ray <ian.ray@ge.com>, Nandor Han <nandor.han@ge.com>,
	Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>,
	<kernel@lists.collabora.co.uk>
Subject: Re: [PATCH 2/2] usb: chipidea: imx: Fix ULPI on imx53
Date: Mon, 29 Jan 2018 11:33:15 +0800	[thread overview]
Message-ID: <20180129033315.GA20311@b29397-desktop> (raw)
In-Reply-To: <20180124171439.10721-2-sebastian.reichel@collabora.co.uk>

On Wed, Jan 24, 2018 at 06:14:39PM +0100, Sebastian Reichel wrote:
> Traditionally, PORTSC should be set before initializing ULPI phys. But
> setting PORTSC before powering on the phy results in a kernel freeze
> on imx53 based GE PPD. As a workaround this initializes the phy early
> in the imx platform code and disables phy power management from the
> core.
> 
> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
> ---
>  drivers/usb/chipidea/ci_hdrc_imx.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index de155c80eb70..e431c5aafe35 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -83,6 +83,7 @@ struct ci_hdrc_imx_data {
>  	struct clk *clk;
>  	struct imx_usbmisc_data *usbmisc_data;
>  	bool supports_runtime_pm;
> +	bool override_phy_control;
>  	bool in_lpm;
>  	/* SoC before i.mx6 (except imx23/imx28) needs three clks */
>  	bool need_three_clks;
> @@ -254,6 +255,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>  	int ret;
>  	const struct of_device_id *of_id;
>  	const struct ci_hdrc_imx_platform_flag *imx_platform_flag;
> +	struct device_node *np = pdev->dev.of_node;
>  
>  	of_id = of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev);
>  	if (!of_id)
> @@ -288,6 +290,14 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>  	}
>  
>  	pdata.usb_phy = data->phy;
> +
> +	if (of_device_is_compatible(np, "fsl,imx53-usb") && pdata.usb_phy &&
> +	    of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI) {
> +		pdata.flags |= CI_HDRC_OVERRIDE_PHY_CONTROL;
> +		data->override_phy_control = true;
> +		usb_phy_init(pdata.usb_phy);
> +	}
> +
>  	pdata.flags |= imx_platform_flag->flags;
>  	if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM)
>  		data->supports_runtime_pm = true;
> @@ -341,6 +351,8 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
>  		pm_runtime_put_noidle(&pdev->dev);
>  	}
>  	ci_hdrc_remove_device(data->ci_pdev);
> +	if (data->override_phy_control)
> +		usb_phy_shutdown(data->phy);
>  	imx_disable_unprepare_clks(&pdev->dev);
>  

Sebastian, I have a question, do you have any USB or generic PHY drivers
for ULPI bus, any power controls are needed for your ULPI peripheral?

-- 

Best Regards,
Peter Chen

WARNING: multiple messages have this Message-ID
From: Peter Chen <hzpeterchen@gmail.com>
To: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Peter Chen <Peter.Chen@nxp.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Ian Ray <ian.ray@ge.com>, Nandor Han <nandor.han@ge.com>,
	Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>,
	kernel@lists.collabora.co.uk
Subject: [2/2] usb: chipidea: imx: Fix ULPI on imx53
Date: Mon, 29 Jan 2018 11:33:15 +0800	[thread overview]
Message-ID: <20180129033315.GA20311@b29397-desktop> (raw)

On Wed, Jan 24, 2018 at 06:14:39PM +0100, Sebastian Reichel wrote:
> Traditionally, PORTSC should be set before initializing ULPI phys. But
> setting PORTSC before powering on the phy results in a kernel freeze
> on imx53 based GE PPD. As a workaround this initializes the phy early
> in the imx platform code and disables phy power management from the
> core.
> 
> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
> ---
>  drivers/usb/chipidea/ci_hdrc_imx.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index de155c80eb70..e431c5aafe35 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -83,6 +83,7 @@ struct ci_hdrc_imx_data {
>  	struct clk *clk;
>  	struct imx_usbmisc_data *usbmisc_data;
>  	bool supports_runtime_pm;
> +	bool override_phy_control;
>  	bool in_lpm;
>  	/* SoC before i.mx6 (except imx23/imx28) needs three clks */
>  	bool need_three_clks;
> @@ -254,6 +255,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>  	int ret;
>  	const struct of_device_id *of_id;
>  	const struct ci_hdrc_imx_platform_flag *imx_platform_flag;
> +	struct device_node *np = pdev->dev.of_node;
>  
>  	of_id = of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev);
>  	if (!of_id)
> @@ -288,6 +290,14 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>  	}
>  
>  	pdata.usb_phy = data->phy;
> +
> +	if (of_device_is_compatible(np, "fsl,imx53-usb") && pdata.usb_phy &&
> +	    of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI) {
> +		pdata.flags |= CI_HDRC_OVERRIDE_PHY_CONTROL;
> +		data->override_phy_control = true;
> +		usb_phy_init(pdata.usb_phy);
> +	}
> +
>  	pdata.flags |= imx_platform_flag->flags;
>  	if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM)
>  		data->supports_runtime_pm = true;
> @@ -341,6 +351,8 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
>  		pm_runtime_put_noidle(&pdev->dev);
>  	}
>  	ci_hdrc_remove_device(data->ci_pdev);
> +	if (data->override_phy_control)
> +		usb_phy_shutdown(data->phy);
>  	imx_disable_unprepare_clks(&pdev->dev);
>  

Sebastian, I have a question, do you have any USB or generic PHY drivers
for ULPI bus, any power controls are needed for your ULPI peripheral?

  parent reply	other threads:[~2018-01-29  3:33 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-24 17:14 [PATCH 1/2] usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag Sebastian Reichel
2018-01-24 17:14 ` [1/2] " Sebastian Reichel
2018-01-24 17:14 ` [PATCH 2/2] usb: chipidea: imx: Fix ULPI on imx53 Sebastian Reichel
2018-01-24 17:14   ` [2/2] " Sebastian Reichel
2018-01-26  2:51   ` [PATCH 2/2] " Peter Chen
2018-01-26  2:51     ` [2/2] " Peter Chen
2018-01-29  3:33   ` Peter Chen [this message]
2018-01-29  3:33     ` Peter Chen
2018-02-06 15:50     ` [PATCH 2/2] " Sebastian Reichel
2018-02-06 15:50       ` [2/2] " Sebastian Reichel
2018-02-07  1:48       ` [PATCH 2/2] " Peter Chen
2018-02-07  1:48         ` [2/2] " Peter Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180129033315.GA20311@b29397-desktop \
    --to=hzpeterchen@gmail.com \
    --cc=Peter.Chen@nxp.com \
    --cc=fabien.lahoudere@collabora.co.uk \
    --cc=gregkh@linuxfoundation.org \
    --cc=ian.ray@ge.com \
    --cc=kernel@lists.collabora.co.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nandor.han@ge.com \
    --cc=sebastian.reichel@collabora.co.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.