[PATCH v7 29/31] directory rename detection: new testcases showcasing a pair of bugs

[Elijah Newren <newren@gmail.com>]

Add a testcase showing spurious rename/rename(1to2) conflicts occurring
due to directory rename detection.

Also add a pair of testcases dealing with moving directory hierarchies
around that were suggested by Stefan Beller as "food for thought" during
his review of an earlier patch series, but which actually uncovered a
bug.  Round things out with a test that is a cross between the two
testcases that showed existing bugs in order to make sure we aren't
merely addressing problems in isolation but in general.

Signed-off-by: Elijah Newren <newren@gmail.com>
---
 t/t6043-merge-rename-directories.sh | 296 ++++++++++++++++++++++++++++++++++++
 1 file changed, 296 insertions(+)

diff --git a/t/t6043-merge-rename-directories.sh b/t/t6043-merge-rename-directories.sh
index a34c57d986..3d292f0c5f 100755
--- a/t/t6043-merge-rename-directories.sh
+++ b/t/t6043-merge-rename-directories.sh
@@ -159,6 +159,7 @@ test_expect_success '1b-check: Merge a directory with another' '
 # Testcase 1c, Transitive renaming
 #   (Related to testcases 3a and 6d -- when should a transitive rename apply?)
 #   (Related to testcases 9c and 9d -- can transitivity repeat?)
+#   (Related to testcase 12b -- joint-transitivity?)
 #   Commit O: z/{b,c},   x/d
 #   Commit A: y/{b,c},   x/d
 #   Commit B: z/{b,c,d}
@@ -2863,6 +2864,68 @@ test_expect_failure '9g-check: Renamed directory that only contained immediate s
 	)
 '
 
+# Testcase 9h, Avoid implicit rename if involved as source on other side
+#   (Extremely closely related to testcase 3a)
+#   Commit O: z/{b,c,d_1}
+#   Commit A: z/{b,c,d_2}
+#   Commit B: y/{b,c}, x/d_1
+#   Expected: y/{b,c}, x/d_2
+#   NOTE: If we applied the z/ -> y/ rename to z/d, then we'd end up with
+#         a rename/rename(1to2) conflict (z/d -> y/d vs. x/d)
+test_expect_success '9h-setup: Avoid dir rename on merely modified path' '
+	test_create_repo 9h &&
+	(
+		cd 9h &&
+
+		mkdir z &&
+		echo b >z/b &&
+		echo c >z/c &&
+		printf "1\n2\n3\n4\n5\n6\n7\n8\nd\n" >z/d &&
+		git add z &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		test_tick &&
+		echo more >>z/d &&
+		git add z/d &&
+		git commit -m "A" &&
+
+		git checkout B &&
+		mkdir y &&
+		mkdir x &&
+		git mv z/b y/ &&
+		git mv z/c y/ &&
+		git mv z/d x/ &&
+		rmdir z &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_failure '9h-check: Avoid dir rename on merely modified path' '
+	(
+		cd 9h &&
+
+		git checkout A^0 &&
+
+		git merge -s recursive B^0 &&
+
+		git ls-files -s >out &&
+		test_line_count = 3 out &&
+
+		git rev-parse >actual \
+			HEAD:y/b HEAD:y/c HEAD:x/d &&
+		git rev-parse >expect \
+			O:z/b    O:z/c    A:z/d &&
+		test_cmp expect actual
+	)
+'
+
 ###########################################################################
 # Rules suggested by section 9:
 #
@@ -3696,4 +3759,237 @@ test_expect_success '11f-check: Avoid deleting not-uptodate with dir rename/rena
 	)
 '
 
+###########################################################################
+# SECTION 12: Everything else
+#
+# Tests suggested by others.  Tests added after implementation completed
+# and submitted.  Grab bag.
+###########################################################################
+
+# Testcase 12a, Moving one directory hierarchy into another
+#   (Related to testcase 9a)
+#   Commit O: node1/{leaf1,leaf2}, node2/{leaf3,leaf4}
+#   Commit A: node1/{leaf1,leaf2,node2/{leaf3,leaf4}}
+#   Commit B: node1/{leaf1,leaf2,leaf5}, node2/{leaf3,leaf4,leaf6}
+#   Expected: node1/{leaf1,leaf2,leaf5,node2/{leaf3,leaf4,leaf6}}
+
+test_expect_success '12a-setup: Moving one directory hierarchy into another' '
+	test_create_repo 12a &&
+	(
+		cd 12a &&
+
+		mkdir -p node1 node2 &&
+		echo leaf1 >node1/leaf1 &&
+		echo leaf2 >node1/leaf2 &&
+		echo leaf3 >node2/leaf3 &&
+		echo leaf4 >node2/leaf4 &&
+		git add node1 node2 &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		git mv node2/ node1/ &&
+		test_tick &&
+		git commit -m "A" &&
+
+		git checkout B &&
+		echo leaf5 >node1/leaf5 &&
+		echo leaf6 >node2/leaf6 &&
+		git add node1 node2 &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_success '12a-check: Moving one directory hierarchy into another' '
+	(
+		cd 12a &&
+
+		git checkout A^0 &&
+
+		git merge -s recursive B^0 &&
+
+		git ls-files -s >out &&
+		test_line_count = 6 out &&
+
+		git rev-parse >actual \
+			HEAD:node1/leaf1 HEAD:node1/leaf2 HEAD:node1/leaf5 \
+			HEAD:node1/node2/leaf3 \
+			HEAD:node1/node2/leaf4 \
+			HEAD:node1/node2/leaf6 &&
+		git rev-parse >expect \
+			O:node1/leaf1    O:node1/leaf2    B:node1/leaf5 \
+			O:node2/leaf3 \
+			O:node2/leaf4 \
+			B:node2/leaf6 &&
+		test_cmp expect actual
+	)
+'
+
+# Testcase 12b, Moving two directory hierarchies into each other
+#   (Related to testcases 1c and 12c)
+#   Commit O: node1/{leaf1, leaf2}, node2/{leaf3, leaf4}
+#   Commit A: node1/{leaf1, leaf2, node2/{leaf3, leaf4}}
+#   Commit B: node2/{leaf3, leaf4, node1/{leaf1, leaf2}}
+#   Expected: node1/node2/node1/{leaf1, leaf2},
+#             node2/node1/node2/{leaf3, leaf4}
+#   NOTE: Without directory renames, we would expect
+#                   node2/node1/{leaf1, leaf2},
+#                   node1/node2/{leaf3, leaf4}
+#         with directory rename detection, we note that
+#             commit A renames node2/ -> node1/node2/
+#             commit B renames node1/ -> node2/node1/
+#         therefore, applying those directory renames to the initial result
+#         (making all four paths experience a transitive renaming), yields
+#         the expected result.
+#
+#         You may ask, is it weird to have two directories rename each other?
+#         To which, I can do no more than shrug my shoulders and say that
+#         even simple rules give weird results when given weird inputs.
+
+test_expect_success '12b-setup: Moving one directory hierarchy into another' '
+	test_create_repo 12b &&
+	(
+		cd 12b &&
+
+		mkdir -p node1 node2 &&
+		echo leaf1 >node1/leaf1 &&
+		echo leaf2 >node1/leaf2 &&
+		echo leaf3 >node2/leaf3 &&
+		echo leaf4 >node2/leaf4 &&
+		git add node1 node2 &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		git mv node2/ node1/ &&
+		test_tick &&
+		git commit -m "A" &&
+
+		git checkout B &&
+		git mv node1/ node2/ &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_failure '12b-check: Moving one directory hierarchy into another' '
+	(
+		cd 12b &&
+
+		git checkout A^0 &&
+
+		git merge -s recursive B^0 &&
+
+		git ls-files -s >out &&
+		test_line_count = 4 out &&
+
+		git rev-parse >actual \
+			HEAD:node1/node2/node1/leaf1 \
+			HEAD:node1/node2/node1/leaf2 \
+			HEAD:node2/node1/node2/leaf3 \
+			HEAD:node2/node1/node2/leaf4 &&
+		git rev-parse >expect \
+			O:node1/leaf1 \
+			O:node1/leaf2 \
+			O:node2/leaf3 \
+			O:node2/leaf4 &&
+		test_cmp expect actual
+	)
+'
+
+# Testcase 12c, Moving two directory hierarchies into each other w/ content merge
+#   (Related to testcase 12b)
+#   Commit O: node1/{       leaf1_1, leaf2_1}, node2/{leaf3_1, leaf4_1}
+#   Commit A: node1/{       leaf1_2, leaf2_2,  node2/{leaf3_2, leaf4_2}}
+#   Commit B: node2/{node1/{leaf1_3, leaf2_3},        leaf3_3, leaf4_3}
+#   Expected: Content merge conflicts for each of:
+#               node1/node2/node1/{leaf1, leaf2},
+#               node2/node1/node2/{leaf3, leaf4}
+#   NOTE: This is *exactly* like 12c, except that every path is modified on
+#         each side of the merge.
+
+test_expect_success '12c-setup: Moving one directory hierarchy into another w/ content merge' '
+	test_create_repo 12c &&
+	(
+		cd 12c &&
+
+		mkdir -p node1 node2 &&
+		printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf1\n" >node1/leaf1 &&
+		printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf2\n" >node1/leaf2 &&
+		printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf3\n" >node2/leaf3 &&
+		printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf4\n" >node2/leaf4 &&
+		git add node1 node2 &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		git mv node2/ node1/ &&
+		for i in `git ls-files`; do echo side A >>$i; done &&
+		git add -u &&
+		test_tick &&
+		git commit -m "A" &&
+
+		git checkout B &&
+		git mv node1/ node2/ &&
+		for i in `git ls-files`; do echo side B >>$i; done &&
+		git add -u &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_failure '12c-check: Moving one directory hierarchy into another w/ content merge' '
+	(
+		cd 12c &&
+
+		git checkout A^0 &&
+
+		test_must_fail git merge -s recursive B^0 &&
+
+		git ls-files -u >out &&
+		test_line_count = 12 out &&
+
+		git rev-parse >actual \
+			:1:node1/node2/node1/leaf1 \
+			:1:node1/node2/node1/leaf2 \
+			:1:node2/node1/node2/leaf3 \
+			:1:node2/node1/node2/leaf4 \
+			:2:node1/node2/node1/leaf1 \
+			:2:node1/node2/node1/leaf2 \
+			:2:node2/node1/node2/leaf3 \
+			:2:node2/node1/node2/leaf4 \
+			:3:node1/node2/node1/leaf1 \
+			:3:node1/node2/node1/leaf2 \
+			:3:node2/node1/node2/leaf3 \
+			:3:node2/node1/node2/leaf4 &&
+		git rev-parse >expect \
+			O:node1/leaf1 \
+			O:node1/leaf2 \
+			O:node2/leaf3 \
+			O:node2/leaf4 \
+			A:node1/leaf1 \
+			A:node1/leaf2 \
+			A:node1/node2/leaf3 \
+			A:node1/node2/leaf4 \
+			B:node2/node1/leaf1 \
+			B:node2/node1/leaf2 \
+			B:node2/leaf3 \
+			B:node2/leaf4 &&
+		test_cmp expect actual
+	)
+'
+
 test_done
-- 
2.16.1.106.gf69932adfe