From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <roman.penyaev@profitbricks.com>
Return-Path: <roman.penyaev@profitbricks.com>
From: Roman Pen <roman.penyaev@profitbricks.com>
To: linux-block@vger.kernel.org,
	linux-rdma@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>,
	Christoph Hellwig <hch@infradead.org>,
	Sagi Grimberg <sagi@grimberg.me>,
	Bart Van Assche <bart.vanassche@sandisk.com>,
	Or Gerlitz <ogerlitz@mellanox.com>,
	Roman Pen <roman.penyaev@profitbricks.com>,
	Danil Kipnis <danil.kipnis@profitbricks.com>,
	Jack Wang <jinpu.wang@profitbricks.com>
Subject: [PATCH 23/24] ibnbd: a bit of documentation
Date: Fri,  2 Feb 2018 15:09:03 +0100
Message-Id: <20180202140904.2017-24-roman.penyaev@profitbricks.com>
In-Reply-To: <20180202140904.2017-1-roman.penyaev@profitbricks.com>
References: <20180202140904.2017-1-roman.penyaev@profitbricks.com>
List-ID: <linux-block@vger.kernel.org>

README with description of major sysfs entries.

Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Danil Kipnis <danil.kipnis@profitbricks.com>
Cc: Jack Wang <jinpu.wang@profitbricks.com>
---
 drivers/block/ibnbd/README | 272 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 272 insertions(+)

diff --git a/drivers/block/ibnbd/README b/drivers/block/ibnbd/README
new file mode 100644
index 000000000000..e0feb39fad14
--- /dev/null
+++ b/drivers/block/ibnbd/README
@@ -0,0 +1,272 @@
+***************************************
+Infiniband Network Block Device (IBNBD)
+***************************************
+
+Introduction
+------------
+
+IBNBD (InfiniBand Network Block Device) is a pair of kernel modules
+(client and server) that allow for remote access of a block device on
+the server over IBTRS protocol using the RDMA (InfiniBand, RoCE, iWarp)
+transport. After being mapped, the remote block devices can be accessed
+on the client side as local block devices.
+
+I/O is transfered between client and server by the IBTRS transport
+modules. The administration of IBNBD and IBTRS modules is done via
+sysfs entries.
+
+Requirements
+------------
+
+  IBTRS kernel modules
+
+Quick Start
+-----------
+
+Server side:
+  # modprobe ibnbd_server
+
+Client side:
+  # modprobe ibnbd_client
+  # echo "sessname=blya path=ip:10.50.100.66 device_path=/dev/ram0" > \
+            /sys/kernel/ibnbd_client/map_device
+
+  Where "sessname=" is a session name, a string to identify the session
+  on client and on server sides; "path=" is a destination IP address or
+  a pair of a source and a destination IPs, separated by comma.  Multiple
+  "path=" options can be specified in order to use multipath  (see IBTRS
+  description for details); "device_path=" is the block device to be
+  mapped from the server side. After the session to the server machine is
+  established, the mapped device will appear on the client side under
+  /dev/ibnbd<N>.
+
+
+======================
+Client Sysfs Interface
+======================
+
+All sysfs files that are not read-only provide the usage information on read:
+
+Example:
+  # cat /sys/kernel/ibnbd_client/map_device
+
+  > Usage: echo "sessname=<name of the ibtrs session> path=<[srcaddr,]dstaddr>
+  > [path=<[srcaddr,]dstaddr>] device_path=<full path on remote side>
+  > [access_mode=<ro|rw|migration>] [input_mode=<mq|rq>]
+  > [io_mode=<fileio|blockio>]" > map_device
+  >
+  > addr ::= [ ip:<ipv4> | ip:<ipv6> | gid:<gid> ]
+
+Entries under /sys/kernel/ibnbd_client/
+=======================================
+
+map_device (RW)
+---------------
+
+Expected format is the following:
+
+    sessname=<name of the ibtrs session>
+    path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...]
+    device_path=<full path on remote side>
+    [access_mode=<ro|rw|migration>]
+    [input_mode=<mq|rq>]
+    [io_mode=<fileio|blockio>]
+
+Where:
+
+sessname: accepts a string not bigger than 256 chars, which identifies
+          a given session on the client and on the server.
+	  I.e. "clt_hostname-srv_hostname" could be a natural choice.
+
+path:     describes a connection between the client and the server by
+	  specifying destination and, when required, the source address.
+	  The addresses are to be provided in the following format:
+
+            ip:<IPv6>
+            ip:<IPv4>
+            gid:<GID>
+
+          for example:
+
+          path=ip:10.0.0.66
+                         The single addr is treated as the destination.
+                         The connection will be established to this
+                         server from any client IP address.
+
+          path=ip:10.0.0.66,ip:10.0.1.66
+                         First addr is the source address and the second
+                         is the destination.
+
+          If multiple "path=" options are specified multiple connection
+          will be established and data will be sent according to
+          the selected multipath policy (see IBTRS mp_policy sysfs entry
+          description).
+
+device_path: Path to the block device on the server side. Path is specified
+	     relative to the directory on server side configured in the
+             'dev_search_path' module parameter of the ibnbd_server.
+             The ibnbd_server prepends the <device_path> received from client
+	     with <dev_search_path> and tries to open the
+	     <dev_search_path>/<device_path> block device.  On success,
+	     a /dev/ibnbd<N> device file, a /sys/block/ibnbd_client/ibnbd<N>/
+	     directory and an entry in /sys/kernel/ibnbd_client/devices will be
+             created.
+
+access_mode: the access_mode parameter specifies if the device is to be
+             mapped as "ro" read-only or "rw" read-write. The server allows
+	     a device to be exported in rw mode only once. The "migration"
+             access mode has to be specified if a second mapping in read-write
+	     mode is desired.
+
+             By default "rw" is used.
+
+input_mode: the input_mode parameter specifies the internal I/O
+            processing mode of the block device on the client.  Accepts
+            "mq" and "rq".
+
+            By default "mq" mode is used.
+
+io_mode:  the io_mode parameter specifies if the device on the server
+          will be opened as block device "blockio" or as file "fileio".
+          When the device is opened as file, the VFS page cache is used
+          for read I/O operations, write I/O operations bypass the page
+          cache and go directly to disk (except meta updates, like file
+          access time).
+
+          By default "blockio" mode is used.
+
+Exit Codes:
+
+If the device is already mapped it will fail with EEXIST. If the input
+has an invalid format it will return EINVAL. If the device path cannot
+be found on the server, it will fail with ENOENT.
+
+Finding device file after mapping
+---------------------------------
+
+After mapping, the device file can be found by:
+ o  The symlink /sys/kernel/ibnbd_client/devices/<device_id> points to
+    /sys/block/<dev-name>. The last part of the symlink destination is
+    the same as the device name.  By extracting the last part of the
+    path the path to the device /dev/<dev-name> can be build.
+
+ o /dev/block/$(cat /sys/kernel/ibnbd_client/devices/<device_id>/dev)
+
+How to find the <device_id> of the device is described on the next
+section.
+
+Entries under /sys/kernel/ibnbd_client/devices/
+===============================================
+
+For each device mapped on the client a new symbolic link is created as
+/sys/kernel/ibnbd_client/devices/<device_id>, which points to the block
+device created by ibnbd (/sys/block/ibnbd<N>/). The <device_id> of each
+device is created as follows:
+
+- If the 'device_path' provided during mapping contains slashes ("/"),
+  they are replaced by exclamation mark ("!") and used as as the
+  <device_id>. Otherwise, the <device_id> will be the same as the
+  "device_path" provided.
+
+Entries under /sys/block/ibnbd<N>/ibnbd_client/
+===============================================
+
+unmap_device (RW)
+-----------------
+
+To unmap a volume, "normal" or "force" has to be written to:
+  /sys/block/ibnbd<N>/ibnbd_client/unmap_device
+
+When "normal" is used, the operation will fail with EBUSY if any process
+is using the device.  When "force" is used, the device is also unmapped
+when device is in use.  All I/Os that are in progress will fail.
+
+Example:
+
+   # echo "normal" > /sys/block/ibnbd0/ibnbd/unmap_device
+
+state (RO)
+----------
+
+The file contains the current state of the block device. The state file
+returns "open" when the device is successfully mapped from the server
+and accepting I/O requests. When the connection to the server gets
+disconnected in case of an error (e.g. link failure), the state file
+returns "closed" and all I/O requests submitted to it will fail with -EIO.
+
+session (RO)
+------------
+
+IBNBD uses IBTRS session to transport the data between client and
+server.  The entry "session" contains the name of the session, that
+was used to establish the IBTRS session.  It's the same name that
+was passed as server parameter to the map_device entry.
+
+mapping_path (RO)
+-----------------
+
+Contains the path that was passed as "device_path" to the map_device
+operation.
+
+======================
+Server Sysfs Interface
+======================
+
+Entries under /sys/kernel/ibnbd_server/
+=======================================
+
+When a client maps a device, a directory entry with the name of the
+block device is created under /sys/kernel/ibnbd_server/devices/.
+
+Entries under /sys/kernel/ibnbd_server/devices/<device_name>/
+=============================================================
+
+block_dev (link)
+---------------
+
+Is a symlink to the sysfs entry of the exported device.
+
+Example:
+
+  block_dev -> ../../../../devices/virtual/block/ram0
+
+Entries under /sys/kernel/ibnbd_server/devices/<device_name>/sessions/
+======================================================================
+
+For each client a particular device is exported to, following directory will be
+created:
+
+/sys/kernel/ibnbd_server/devices/<device_name>/sessions/<session-name>/
+
+When the device is unmapped by that client, the directory will be removed.
+
+Entries under /sys/kernel/ibnbd_server/devices/<device_name>/sessions/<session-name>
+====================================================================================
+
+read_only (RO)
+--------------
+
+Contains '1' if device is mapped read-only, otherwise '0'.
+
+mapping_path (RO)
+-----------------
+
+Contains the relative device path provided by the user during mapping.
+
+==============================
+IBNBD-Server Module Parameters
+==============================
+
+dev_search_path
+---------------
+
+When a device is mapped from the client, the server generates the path
+to the block device on the server side by concatenating dev_search_path
+and the "device_path" that was specified in the map_device operation.
+
+The default dev_search_path is: "/".
+
+Contact
+-------
+
+Mailing list: "IBNBD/IBTRS Storage Team" <ibnbd@profitbricks.com>
-- 
2.13.1

From mboxrd@z Thu Jan  1 00:00:00 1970
From: Roman Pen <roman.penyaev-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
Subject: [PATCH 23/24] ibnbd: a bit of documentation
Date: Fri,  2 Feb 2018 15:09:03 +0100
Message-ID: <20180202140904.2017-24-roman.penyaev@profitbricks.com>
References: <20180202140904.2017-1-roman.penyaev@profitbricks.com>
Return-path: <linux-rdma-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
In-Reply-To: <20180202140904.2017-1-roman.penyaev-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
Sender: linux-rdma-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
To: linux-block-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Jens Axboe <axboe-tSWWG44O7X1aa/9Udqfwiw@public.gmane.org>, Christoph Hellwig <hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>, Sagi Grimberg <sagi-NQWnxTmZq1alnMjI0IkVqw@public.gmane.org>, Bart Van Assche <bart.vanassche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>, Or Gerlitz <ogerlitz-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>, Roman Pen <roman.penyaev-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>, Danil Kipnis <danil.kipnis-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>, Jack Wang <jinpu.wang-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
List-Id: linux-rdma@vger.kernel.org

README with description of major sysfs entries.

Signed-off-by: Roman Pen <roman.penyaev-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
Signed-off-by: Danil Kipnis <danil.kipnis-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
Cc: Jack Wang <jinpu.wang-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
---
 drivers/block/ibnbd/README | 272 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 272 insertions(+)

diff --git a/drivers/block/ibnbd/README b/drivers/block/ibnbd/README
new file mode 100644
index 000000000000..e0feb39fad14
--- /dev/null
+++ b/drivers/block/ibnbd/README
@@ -0,0 +1,272 @@
+***************************************
+Infiniband Network Block Device (IBNBD)
+***************************************
+
+Introduction
+------------
+
+IBNBD (InfiniBand Network Block Device) is a pair of kernel modules
+(client and server) that allow for remote access of a block device on
+the server over IBTRS protocol using the RDMA (InfiniBand, RoCE, iWarp)
+transport. After being mapped, the remote block devices can be accessed
+on the client side as local block devices.
+
+I/O is transfered between client and server by the IBTRS transport
+modules. The administration of IBNBD and IBTRS modules is done via
+sysfs entries.
+
+Requirements
+------------
+
+  IBTRS kernel modules
+
+Quick Start
+-----------
+
+Server side:
+  # modprobe ibnbd_server
+
+Client side:
+  # modprobe ibnbd_client
+  # echo "sessname=blya path=ip:10.50.100.66 device_path=/dev/ram0" > \
+            /sys/kernel/ibnbd_client/map_device
+
+  Where "sessname=" is a session name, a string to identify the session
+  on client and on server sides; "path=" is a destination IP address or
+  a pair of a source and a destination IPs, separated by comma.  Multiple
+  "path=" options can be specified in order to use multipath  (see IBTRS
+  description for details); "device_path=" is the block device to be
+  mapped from the server side. After the session to the server machine is
+  established, the mapped device will appear on the client side under
+  /dev/ibnbd<N>.
+
+
+======================
+Client Sysfs Interface
+======================
+
+All sysfs files that are not read-only provide the usage information on read:
+
+Example:
+  # cat /sys/kernel/ibnbd_client/map_device
+
+  > Usage: echo "sessname=<name of the ibtrs session> path=<[srcaddr,]dstaddr>
+  > [path=<[srcaddr,]dstaddr>] device_path=<full path on remote side>
+  > [access_mode=<ro|rw|migration>] [input_mode=<mq|rq>]
+  > [io_mode=<fileio|blockio>]" > map_device
+  >
+  > addr ::= [ ip:<ipv4> | ip:<ipv6> | gid:<gid> ]
+
+Entries under /sys/kernel/ibnbd_client/
+=======================================
+
+map_device (RW)
+---------------
+
+Expected format is the following:
+
+    sessname=<name of the ibtrs session>
+    path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...]
+    device_path=<full path on remote side>
+    [access_mode=<ro|rw|migration>]
+    [input_mode=<mq|rq>]
+    [io_mode=<fileio|blockio>]
+
+Where:
+
+sessname: accepts a string not bigger than 256 chars, which identifies
+          a given session on the client and on the server.
+	  I.e. "clt_hostname-srv_hostname" could be a natural choice.
+
+path:     describes a connection between the client and the server by
+	  specifying destination and, when required, the source address.
+	  The addresses are to be provided in the following format:
+
+            ip:<IPv6>
+            ip:<IPv4>
+            gid:<GID>
+
+          for example:
+
+          path=ip:10.0.0.66
+                         The single addr is treated as the destination.
+                         The connection will be established to this
+                         server from any client IP address.
+
+          path=ip:10.0.0.66,ip:10.0.1.66
+                         First addr is the source address and the second
+                         is the destination.
+
+          If multiple "path=" options are specified multiple connection
+          will be established and data will be sent according to
+          the selected multipath policy (see IBTRS mp_policy sysfs entry
+          description).
+
+device_path: Path to the block device on the server side. Path is specified
+	     relative to the directory on server side configured in the
+             'dev_search_path' module parameter of the ibnbd_server.
+             The ibnbd_server prepends the <device_path> received from client
+	     with <dev_search_path> and tries to open the
+	     <dev_search_path>/<device_path> block device.  On success,
+	     a /dev/ibnbd<N> device file, a /sys/block/ibnbd_client/ibnbd<N>/
+	     directory and an entry in /sys/kernel/ibnbd_client/devices will be
+             created.
+
+access_mode: the access_mode parameter specifies if the device is to be
+             mapped as "ro" read-only or "rw" read-write. The server allows
+	     a device to be exported in rw mode only once. The "migration"
+             access mode has to be specified if a second mapping in read-write
+	     mode is desired.
+
+             By default "rw" is used.
+
+input_mode: the input_mode parameter specifies the internal I/O
+            processing mode of the block device on the client.  Accepts
+            "mq" and "rq".
+
+            By default "mq" mode is used.
+
+io_mode:  the io_mode parameter specifies if the device on the server
+          will be opened as block device "blockio" or as file "fileio".
+          When the device is opened as file, the VFS page cache is used
+          for read I/O operations, write I/O operations bypass the page
+          cache and go directly to disk (except meta updates, like file
+          access time).
+
+          By default "blockio" mode is used.
+
+Exit Codes:
+
+If the device is already mapped it will fail with EEXIST. If the input
+has an invalid format it will return EINVAL. If the device path cannot
+be found on the server, it will fail with ENOENT.
+
+Finding device file after mapping
+---------------------------------
+
+After mapping, the device file can be found by:
+ o  The symlink /sys/kernel/ibnbd_client/devices/<device_id> points to
+    /sys/block/<dev-name>. The last part of the symlink destination is
+    the same as the device name.  By extracting the last part of the
+    path the path to the device /dev/<dev-name> can be build.
+
+ o /dev/block/$(cat /sys/kernel/ibnbd_client/devices/<device_id>/dev)
+
+How to find the <device_id> of the device is described on the next
+section.
+
+Entries under /sys/kernel/ibnbd_client/devices/
+===============================================
+
+For each device mapped on the client a new symbolic link is created as
+/sys/kernel/ibnbd_client/devices/<device_id>, which points to the block
+device created by ibnbd (/sys/block/ibnbd<N>/). The <device_id> of each
+device is created as follows:
+
+- If the 'device_path' provided during mapping contains slashes ("/"),
+  they are replaced by exclamation mark ("!") and used as as the
+  <device_id>. Otherwise, the <device_id> will be the same as the
+  "device_path" provided.
+
+Entries under /sys/block/ibnbd<N>/ibnbd_client/
+===============================================
+
+unmap_device (RW)
+-----------------
+
+To unmap a volume, "normal" or "force" has to be written to:
+  /sys/block/ibnbd<N>/ibnbd_client/unmap_device
+
+When "normal" is used, the operation will fail with EBUSY if any process
+is using the device.  When "force" is used, the device is also unmapped
+when device is in use.  All I/Os that are in progress will fail.
+
+Example:
+
+   # echo "normal" > /sys/block/ibnbd0/ibnbd/unmap_device
+
+state (RO)
+----------
+
+The file contains the current state of the block device. The state file
+returns "open" when the device is successfully mapped from the server
+and accepting I/O requests. When the connection to the server gets
+disconnected in case of an error (e.g. link failure), the state file
+returns "closed" and all I/O requests submitted to it will fail with -EIO.
+
+session (RO)
+------------
+
+IBNBD uses IBTRS session to transport the data between client and
+server.  The entry "session" contains the name of the session, that
+was used to establish the IBTRS session.  It's the same name that
+was passed as server parameter to the map_device entry.
+
+mapping_path (RO)
+-----------------
+
+Contains the path that was passed as "device_path" to the map_device
+operation.
+
+======================
+Server Sysfs Interface
+======================
+
+Entries under /sys/kernel/ibnbd_server/
+=======================================
+
+When a client maps a device, a directory entry with the name of the
+block device is created under /sys/kernel/ibnbd_server/devices/.
+
+Entries under /sys/kernel/ibnbd_server/devices/<device_name>/
+=============================================================
+
+block_dev (link)
+---------------
+
+Is a symlink to the sysfs entry of the exported device.
+
+Example:
+
+  block_dev -> ../../../../devices/virtual/block/ram0
+
+Entries under /sys/kernel/ibnbd_server/devices/<device_name>/sessions/
+======================================================================
+
+For each client a particular device is exported to, following directory will be
+created:
+
+/sys/kernel/ibnbd_server/devices/<device_name>/sessions/<session-name>/
+
+When the device is unmapped by that client, the directory will be removed.
+
+Entries under /sys/kernel/ibnbd_server/devices/<device_name>/sessions/<session-name>
+====================================================================================
+
+read_only (RO)
+--------------
+
+Contains '1' if device is mapped read-only, otherwise '0'.
+
+mapping_path (RO)
+-----------------
+
+Contains the relative device path provided by the user during mapping.
+
+==============================
+IBNBD-Server Module Parameters
+==============================
+
+dev_search_path
+---------------
+
+When a device is mapped from the client, the server generates the path
+to the block device on the server side by concatenating dev_search_path
+and the "device_path" that was specified in the map_device operation.
+
+The default dev_search_path is: "/".
+
+Contact
+-------
+
+Mailing list: "IBNBD/IBTRS Storage Team" <ibnbd-EIkl63zCoXaH+58JC4qpiA@public.gmane.org>
-- 
2.13.1

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html