[PATCH 10/10] drm/i915: Estimate and update missed vblanks.

[Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>]

From: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com>

The frame counter may have got reset between disabling and enabling vblank
interrupts due to DMC putting the hardware to DC5/6 states if PSR was
active. The frame counter could also have stalled if PSR was active in case
there was no DMC. The frame counter resetting has a user visible impact
of screen freezes.

Make use of drm_vblank_restore() to compute missed vblanks for the duration
in which vblank interrupts were disabled and update the vblank counter with
this value as diff. There's no need to check if PSR was actually active in
the interrupt disabled duration, so simplify the check to a feature check.

Enabling vblank interrupts wakes up the hardware from DC5/6 and prevents it
from going back again as long as the there are pending interrupts. So, we
don't have to explicity disallow DC5/6 after enabling vblank interrupts to
keep the counter running.

This change is not applicable to CHV, as enabling interrupts does not
prevent the hardware from activating PSR.

v2: Added comments(Rodrigo) and rewrote commit message.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_irq.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 252feff2892d..e86c645b6b07 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2968,6 +2968,12 @@ static int ironlake_enable_vblank(struct drm_device *dev, unsigned int pipe)
 	ilk_enable_display_irq(dev_priv, bit);
 	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
 
+	/* Even though there is no DMC, frame counter can get stuck when
+	 * PSR is active as no frames are generated.
+	 */
+	if (HAS_PSR(dev_priv))
+		drm_vblank_restore(dev, pipe);
+
 	return 0;
 }
 
@@ -2980,6 +2986,12 @@ static int gen8_enable_vblank(struct drm_device *dev, unsigned int pipe)
 	bdw_enable_pipe_irq(dev_priv, pipe, GEN8_PIPE_VBLANK);
 	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
 
+	/* Even if there is no DMC, frame counter can get stuck when
+	 * PSR is active as no frames are generated, so check only for PSR.
+	 */
+	if (HAS_PSR(dev_priv))
+		drm_vblank_restore(dev, pipe);
+
 	return 0;
 }
 
-- 
2.14.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel