All of lore.kernel.org
 help / color / mirror / Atom feed
From: Haozhong Zhang <haozhong.zhang@intel.com>
To: Pankaj Gupta <pagupta@redhat.com>
Cc: qemu-devel@nongnu.org,
	Xiao Guangrong <xiaoguangrong.eric@gmail.com>,
	mst@redhat.com, Juan Quintela <quintela@redhat.com>,
	dgilbert@redhat.com, Stefan Hajnoczi <stefanha@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Igor Mammedov <imammedo@redhat.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Eduardo Habkost <ehabkost@redhat.com>
Subject: Re: [Qemu-devel] [PATCH v2 5/8] migration/ram: ensure write persistence on loading zero pages to PMEM
Date: Wed, 7 Feb 2018 19:18:55 +0800	[thread overview]
Message-ID: <20180207111855.2o2zq3evrkwypomw@hz-desktop> (raw)
In-Reply-To: <1091122025.1148119.1517998640676.JavaMail.zimbra@redhat.com>

On 02/07/18 05:17 -0500, Pankaj Gupta wrote:
> 
> > 
> > When loading a zero page, check whether it will be loaded to
> > persistent memory If yes, load it by libpmem function
> > pmem_memset_nodrain().  Combined with a call to pmem_drain() at the
> > end of RAM loading, we can guarantee all those zero pages are
> > persistently loaded.
> > 
> > Depending on the host HW/SW configurations, pmem_drain() can be
> > "sfence".  Therefore, we do not call pmem_drain() after each
> > pmem_memset_nodrain(), or use pmem_memset_persist() (equally
> > pmem_memset_nodrain() + pmem_drain()), in order to avoid unnecessary
> > overhead.
> 
> Are you saying we don't need 'pmem_drain()'?

pmem_drain() is called only once after all ram blocks are loaded.

> 
> I can see its called in patch 5 in ram_load? But
> I also see empty definition. Anything I am missing here?

Functions defined in include/qemu/pmem.h are stubs and used only when
QEMU is not compiled with libpmem. When QEMU is compiled with
--enabled-libpmem, the one in libpmem is used.

Haozhong

> 
> Thanks,
> Pankaj
> 
> > 
> > Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
> > ---
> >  include/qemu/pmem.h |  9 +++++++++
> >  migration/ram.c     | 34 +++++++++++++++++++++++++++++-----
> >  2 files changed, 38 insertions(+), 5 deletions(-)
> > 
> > diff --git a/include/qemu/pmem.h b/include/qemu/pmem.h
> > index 9017596ff0..861d8ecc21 100644
> > --- a/include/qemu/pmem.h
> > +++ b/include/qemu/pmem.h
> > @@ -26,6 +26,15 @@ pmem_memcpy_persist(void *pmemdest, const void *src,
> > size_t len)
> >      return memcpy(pmemdest, src, len);
> >  }
> >  
> > +static inline void *pmem_memset_nodrain(void *pmemdest, int c, size_t len)
> > +{
> > +    return memset(pmemdest, c, len);
> > +}
> > +
> > +static inline void pmem_drain(void)
> > +{
> > +}
> > +
> >  #endif /* CONFIG_LIBPMEM */
> >  
> >  #endif /* !QEMU_PMEM_H */
> > diff --git a/migration/ram.c b/migration/ram.c
> > index cb1950f3eb..5a0e503818 100644
> > --- a/migration/ram.c
> > +++ b/migration/ram.c
> > @@ -49,6 +49,7 @@
> >  #include "qemu/rcu_queue.h"
> >  #include "migration/colo.h"
> >  #include "migration/block.h"
> > +#include "qemu/pmem.h"
> >  
> >  /***********************************************************/
> >  /* ram save/restore */
> > @@ -2467,6 +2468,20 @@ static inline void
> > *host_from_ram_block_offset(RAMBlock *block,
> >      return block->host + offset;
> >  }
> >  
> > +static void ram_handle_compressed_common(void *host, uint8_t ch, uint64_t
> > size,
> > +                                         bool is_pmem)
> > +{
> > +    if (!ch && is_zero_range(host, size)) {
> > +        return;
> > +    }
> > +
> > +    if (!is_pmem) {
> > +        memset(host, ch, size);
> > +    } else {
> > +        pmem_memset_nodrain(host, ch, size);
> > +    }
> > +}
> > +
> >  /**
> >   * ram_handle_compressed: handle the zero page case
> >   *
> > @@ -2479,9 +2494,7 @@ static inline void *host_from_ram_block_offset(RAMBlock
> > *block,
> >   */
> >  void ram_handle_compressed(void *host, uint8_t ch, uint64_t size)
> >  {
> > -    if (ch != 0 || !is_zero_range(host, size)) {
> > -        memset(host, ch, size);
> > -    }
> > +    return ram_handle_compressed_common(host, ch, size, false);
> >  }
> >  
> >  static void *do_data_decompress(void *opaque)
> > @@ -2823,6 +2836,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
> > version_id)
> >      bool postcopy_running = postcopy_is_running();
> >      /* ADVISE is earlier, it shows the source has the postcopy capability on
> >      */
> >      bool postcopy_advised = postcopy_is_advised();
> > +    bool need_pmem_drain = false;
> >  
> >      seq_iter++;
> >  
> > @@ -2848,6 +2862,8 @@ static int ram_load(QEMUFile *f, void *opaque, int
> > version_id)
> >          ram_addr_t addr, total_ram_bytes;
> >          void *host = NULL;
> >          uint8_t ch;
> > +        RAMBlock *block = NULL;
> > +        bool is_pmem = false;
> >  
> >          addr = qemu_get_be64(f);
> >          flags = addr & ~TARGET_PAGE_MASK;
> > @@ -2864,7 +2880,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
> > version_id)
> >  
> >          if (flags & (RAM_SAVE_FLAG_ZERO | RAM_SAVE_FLAG_PAGE |
> >                       RAM_SAVE_FLAG_COMPRESS_PAGE | RAM_SAVE_FLAG_XBZRLE)) {
> > -            RAMBlock *block = ram_block_from_stream(f, flags);
> > +            block = ram_block_from_stream(f, flags);
> >  
> >              host = host_from_ram_block_offset(block, addr);
> >              if (!host) {
> > @@ -2874,6 +2890,9 @@ static int ram_load(QEMUFile *f, void *opaque, int
> > version_id)
> >              }
> >              ramblock_recv_bitmap_set(block, host);
> >              trace_ram_load_loop(block->idstr, (uint64_t)addr, flags, host);
> > +
> > +            is_pmem = ramblock_is_pmem(block);
> > +            need_pmem_drain = need_pmem_drain || is_pmem;
> >          }
> >  
> >          switch (flags & ~RAM_SAVE_FLAG_CONTINUE) {
> > @@ -2927,7 +2946,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
> > version_id)
> >  
> >          case RAM_SAVE_FLAG_ZERO:
> >              ch = qemu_get_byte(f);
> > -            ram_handle_compressed(host, ch, TARGET_PAGE_SIZE);
> > +            ram_handle_compressed_common(host, ch, TARGET_PAGE_SIZE,
> > is_pmem);
> >              break;
> >  
> >          case RAM_SAVE_FLAG_PAGE:
> > @@ -2970,6 +2989,11 @@ static int ram_load(QEMUFile *f, void *opaque, int
> > version_id)
> >      }
> >  
> >      wait_for_decompress_done();
> > +
> > +    if (need_pmem_drain) {
> > +        pmem_drain();
> > +    }
> > +
> >      rcu_read_unlock();
> >      trace_ram_load_complete(ret, seq_iter);
> >      return ret;
> > --
> > 2.14.1
> > 
> > 
> > 

  reply	other threads:[~2018-02-07 11:19 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-07  7:33 [Qemu-devel] [PATCH v2 0/8] nvdimm: guarantee persistence of QEMU writes to persistent memory Haozhong Zhang
2018-02-07  7:33 ` [Qemu-devel] [PATCH v2 1/8] memory, exec: switch file ram allocation functions to 'flags' parameters Haozhong Zhang
2018-02-07  7:33 ` [Qemu-devel] [PATCH v2 2/8] hostmem-file: add the 'pmem' option Haozhong Zhang
2018-02-07  7:33 ` [Qemu-devel] [PATCH v2 3/8] configure: add libpmem support Haozhong Zhang
2018-02-07  7:33 ` [Qemu-devel] [PATCH v2 4/8] mem/nvdimm: ensure write persistence to PMEM in label emulation Haozhong Zhang
2018-02-09 14:27   ` Stefan Hajnoczi
2018-02-09 14:57     ` Haozhong Zhang
2018-02-12 13:55       ` Stefan Hajnoczi
2018-02-07  7:33 ` [Qemu-devel] [PATCH v2 5/8] migration/ram: ensure write persistence on loading zero pages to PMEM Haozhong Zhang
2018-02-07 10:17   ` Pankaj Gupta
2018-02-07 11:18     ` Haozhong Zhang [this message]
2018-02-07 11:30       ` Pankaj Gupta
2018-02-07 11:38   ` Dr. David Alan Gilbert
2018-02-07 11:52     ` Haozhong Zhang
2018-02-07 12:51       ` Haozhong Zhang
2018-02-07 12:59         ` Dr. David Alan Gilbert
2018-02-07 14:10         ` Pankaj Gupta
2018-02-07 12:56       ` Dr. David Alan Gilbert
2018-02-07  7:33 ` [Qemu-devel] [PATCH v2 6/8] migration/ram: ensure write persistence on loading normal " Haozhong Zhang
2018-02-07 11:49   ` Dr. David Alan Gilbert
2018-02-07 12:02     ` Haozhong Zhang
2018-02-07  7:33 ` [Qemu-devel] [PATCH v2 7/8] migration/ram: ensure write persistence on loading compressed " Haozhong Zhang
2018-02-07 11:54   ` Dr. David Alan Gilbert
2018-02-07 12:15     ` Haozhong Zhang
2018-02-07 13:03       ` Dr. David Alan Gilbert
2018-02-07 13:20         ` Haozhong Zhang
2018-02-07 13:24           ` Dr. David Alan Gilbert
2018-02-07 18:05             ` Dan Williams
2018-02-07 18:08               ` Dr. David Alan Gilbert
2018-02-07 18:31                 ` Dan Williams
2018-02-07 18:37                   ` Dr. David Alan Gilbert
2018-02-07 22:43                     ` Dan Williams
2018-02-07  7:33 ` [Qemu-devel] [PATCH v2 8/8] migration/ram: ensure write persistence on loading xbzrle " Haozhong Zhang
2018-02-07 13:08   ` Dr. David Alan Gilbert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180207111855.2o2zq3evrkwypomw@hz-desktop \
    --to=haozhong.zhang@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=dgilbert@redhat.com \
    --cc=ehabkost@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=mst@redhat.com \
    --cc=pagupta@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    --cc=stefanha@redhat.com \
    --cc=xiaoguangrong.eric@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.