From mboxrd@z Thu Jan 1 00:00:00 1970 From: Linus Walleij Subject: [PATCH 15/21] regulator: tps65090: Pass descriptor instead of GPIO number Date: Mon, 12 Feb 2018 14:17:11 +0100 Message-ID: <20180212131717.27193-16-linus.walleij@linaro.org> References: <20180212131717.27193-1-linus.walleij@linaro.org> Return-path: In-Reply-To: <20180212131717.27193-1-linus.walleij@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Liam Girdwood , Mark Brown Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, Linus Walleij , Lee Jones List-Id: linux-gpio@vger.kernel.org Instead of passing a global GPIO number for the enable GPIO, pass a descriptor looked up from the device tree node for the regulator. This regulator supports passing platform data, but enable/sleep regulators are looked up from the device tree exclusively, so we can need not touch other files. Cc: Lee Jones Signed-off-by: Linus Walleij --- Lee: it would be nice if you could ACK this smallish patch to the MFD header. --- drivers/regulator/tps65090-regulator.c | 50 ++++++++++++++++------------------ include/linux/mfd/tps65090.h | 8 ++++-- 2 files changed, 28 insertions(+), 30 deletions(-) diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c index 395f35dc8cdb..2d398fa3b720 100644 --- a/drivers/regulator/tps65090-regulator.c +++ b/drivers/regulator/tps65090-regulator.c @@ -19,8 +19,8 @@ #include #include #include -#include -#include +#include +#include #include #include #include @@ -300,26 +300,6 @@ static int tps65090_regulator_disable_ext_control( return tps65090_config_ext_control(ri, false); } -static void tps65090_configure_regulator_config( - struct tps65090_regulator_plat_data *tps_pdata, - struct regulator_config *config) -{ - if (gpio_is_valid(tps_pdata->gpio)) { - int gpio_flag = GPIOF_OUT_INIT_LOW; - - if (tps_pdata->reg_init_data->constraints.always_on || - tps_pdata->reg_init_data->constraints.boot_on) - gpio_flag = GPIOF_OUT_INIT_HIGH; - - config->ena_gpio = tps_pdata->gpio; - config->ena_gpio_initialized = true; - config->ena_gpio_flags = gpio_flag; - } else { - config->ena_gpio = -EINVAL; - config->ena_gpio_initialized = false; - } -} - #ifdef CONFIG_OF static struct of_regulator_match tps65090_matches[] = { { .name = "dcdc1", }, @@ -385,9 +365,26 @@ static struct tps65090_platform_data *tps65090_parse_dt_reg_data( rpdata->enable_ext_control = of_property_read_bool( tps65090_matches[idx].of_node, "ti,enable-ext-control"); - if (rpdata->enable_ext_control) - rpdata->gpio = of_get_named_gpio(np, - "dcdc-ext-control-gpios", 0); + if (rpdata->enable_ext_control) { + enum gpiod_flags gflags; + + if (ri_data->constraints.always_on || + ri_data->constraints.boot_on) + gflags = GPIOD_OUT_HIGH; + else + gflags = GPIOD_OUT_LOW; + + rpdata->gpiod = devm_gpiod_get_from_of_node(&pdev->dev, + tps65090_matches[idx].of_node, + "dcdc-ext-control-gpios", 0, + gflags, + "tps65090"); + if (IS_ERR(rpdata->gpiod)) + return ERR_CAST(rpdata->gpiod); + if (!rpdata->gpiod) + dev_err(&pdev->dev, + "could not find DCDC external control GPIO\n"); + } if (of_property_read_u32(tps65090_matches[idx].of_node, "ti,overcurrent-wait", @@ -455,8 +452,7 @@ static int tps65090_regulator_probe(struct platform_device *pdev) */ if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data) { if (tps_pdata->enable_ext_control) { - tps65090_configure_regulator_config( - tps_pdata, &config); + config.ena_gpiod = tps_pdata->gpiod; ri->desc->ops = &tps65090_ext_control_ops; } else { ret = tps65090_regulator_disable_ext_control( diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h index 67d144b3b8f9..f05bf4a146e2 100644 --- a/include/linux/mfd/tps65090.h +++ b/include/linux/mfd/tps65090.h @@ -83,6 +83,8 @@ enum { #define TPS65090_MAX_REG TPS65090_REG_AD_OUT2 #define TPS65090_NUM_REGS (TPS65090_MAX_REG + 1) +struct gpio_desc; + struct tps65090 { struct device *dev; struct regmap *rmap; @@ -95,8 +97,8 @@ struct tps65090 { * @reg_init_data: The regulator init data. * @enable_ext_control: Enable extrenal control or not. Only available for * DCDC1, DCDC2 and DCDC3. - * @gpio: Gpio number if external control is enabled and controlled through - * gpio. + * @gpiod: Gpio descriptor if external control is enabled and controlled through + * gpio * @overcurrent_wait_valid: True if the overcurrent_wait should be applied. * @overcurrent_wait: Value to set as the overcurrent wait time. This is the * actual bitfield value, not a time in ms (valid value are 0 - 3). @@ -104,7 +106,7 @@ struct tps65090 { struct tps65090_regulator_plat_data { struct regulator_init_data *reg_init_data; bool enable_ext_control; - int gpio; + struct gpio_desc *gpiod; bool overcurrent_wait_valid; int overcurrent_wait; }; -- 2.14.3