From mboxrd@z Thu Jan 1 00:00:00 1970 From: Linus Walleij Subject: [PATCH 03/21] regulator: gpio: Get enable GPIO using GPIO descriptor Date: Mon, 12 Feb 2018 14:16:59 +0100 Message-ID: <20180212131717.27193-4-linus.walleij@linaro.org> References: <20180212131717.27193-1-linus.walleij@linaro.org> Return-path: In-Reply-To: <20180212131717.27193-1-linus.walleij@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Liam Girdwood , Mark Brown Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, Linus Walleij , Philipp Zabel List-Id: linux-gpio@vger.kernel.org We augment the GPIO regulator to get the *enable* regulator GPIO line (not the other lines) using a descriptor rather than a global number. We then pass this into the regulator core which has been prepared to hande enable descriptors in a separate patch. Switch over the two boardfiles using this facility and clean up so we only pass descriptors around. Cc: Philipp Zabel # HX4700/Magician maintainer Signed-off-by: Linus Walleij --- arch/arm/mach-pxa/hx4700.c | 12 +++++++++++- arch/arm/mach-pxa/magician.c | 11 ++++++++++- drivers/regulator/gpio-regulator.c | 23 +++++++++++------------ include/linux/regulator/gpio-regulator.h | 3 --- 4 files changed, 32 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index e2e7f247a645..6717a10180eb 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -711,7 +712,6 @@ static struct gpio_regulator_state bq24022_states[] = { static struct gpio_regulator_config bq24022_info = { .supply_name = "bq24022", - .enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN, .enable_high = 0, .enabled_at_boot = 0, @@ -733,6 +733,15 @@ static struct platform_device bq24022 = { }, }; +static struct gpiod_lookup_table bq24022_gpiod_table = { + .dev_id = "gpio-regulator", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO72_HX4700_BQ24022_nCHARGE_EN, + "enable", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* * StrataFlash */ @@ -875,6 +884,7 @@ static void __init hx4700_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); + gpiod_add_lookup_table(&bq24022_gpiod_table); platform_add_devices(devices, ARRAY_SIZE(devices)); pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup)); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 14c0f80bc9e7..9a5bda3ea194 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -657,7 +657,6 @@ static struct gpio_regulator_state bq24022_states[] = { static struct gpio_regulator_config bq24022_info = { .supply_name = "bq24022", - .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, .enable_high = 0, .enabled_at_boot = 1, @@ -679,6 +678,15 @@ static struct platform_device bq24022 = { }, }; +static struct gpiod_lookup_table bq24022_gpiod_table = { + .dev_id = "gpio-regulator", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, + "enable", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* * fixed regulator for ads7846 */ @@ -1007,6 +1015,7 @@ static void __init magician_init(void) regulator_register_always_on(0, "power", pwm_backlight_supply, ARRAY_SIZE(pwm_backlight_supply), 5000000); + gpiod_add_lookup_table(&bq24022_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(devices)); } diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index 0fce06acfaec..172ca4c578b2 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -161,10 +162,6 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np, of_property_read_u32(np, "startup-delay-us", &config->startup_delay); - config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0); - if (config->enable_gpio < 0 && config->enable_gpio != -ENOENT) - return ERR_PTR(config->enable_gpio); - /* Fetch GPIOs. - optional property*/ ret = of_gpio_count(np); if ((ret < 0) && (ret != -ENOENT)) @@ -254,6 +251,7 @@ static int gpio_regulator_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct gpio_regulator_data *drvdata; struct regulator_config cfg = { }; + enum gpiod_flags gflags; int ptr, ret, state; drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data), @@ -340,21 +338,22 @@ static int gpio_regulator_probe(struct platform_device *pdev) cfg.driver_data = drvdata; cfg.of_node = np; - if (gpio_is_valid(config->enable_gpio)) { - cfg.ena_gpio = config->enable_gpio; - cfg.ena_gpio_initialized = true; - } cfg.ena_gpio_invert = !config->enable_high; if (config->enabled_at_boot) { if (config->enable_high) - cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; + gflags = GPIOD_OUT_HIGH; else - cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW; + gflags = GPIOD_OUT_LOW; } else { if (config->enable_high) - cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW; + gflags = GPIOD_OUT_LOW; else - cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; + gflags = GPIOD_OUT_HIGH; + } + cfg.ena_gpiod = devm_gpiod_get_optional(&pdev->dev, "enable", gflags); + if (IS_ERR(cfg.ena_gpiod)) { + ret = PTR_ERR(cfg.ena_gpiod); + goto err_stategpio; } drvdata->dev = regulator_register(&drvdata->desc, &cfg); diff --git a/include/linux/regulator/gpio-regulator.h b/include/linux/regulator/gpio-regulator.h index 19fbd267406d..536cab86f2d5 100644 --- a/include/linux/regulator/gpio-regulator.h +++ b/include/linux/regulator/gpio-regulator.h @@ -44,8 +44,6 @@ struct gpio_regulator_state { /** * struct gpio_regulator_config - config structure * @supply_name: Name of the regulator supply - * @enable_gpio: GPIO to use for enable control - * set to -EINVAL if not used * @enable_high: Polarity of enable GPIO * 1 = Active high, 0 = Active low * @enabled_at_boot: Whether regulator has been enabled at @@ -69,7 +67,6 @@ struct gpio_regulator_state { struct gpio_regulator_config { const char *supply_name; - int enable_gpio; unsigned enable_high:1; unsigned enabled_at_boot:1; unsigned startup_delay; -- 2.14.3