From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Date: Tue, 13 Feb 2018 08:50:27 +0100 Subject: [U-Boot] [PATCH 04/11] sunxi: Add SUNXI_RSB kconfig entry In-Reply-To: References: <1517930128-26181-1-git-send-email-jagan@amarulasolutions.com> <1517930128-26181-5-git-send-email-jagan@amarulasolutions.com> <20180206154936.ri3hekpgqe2mhkpr@flea> Message-ID: <20180213075027.inohjemlgsz5mcml@flea.lan> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Feb 09, 2018 at 04:09:41PM +0530, Jagan Teki wrote: > On Tue, Feb 6, 2018 at 9:19 PM, Maxime Ripard wrote: > > Hi, > > > > On Tue, Feb 06, 2018 at 08:45:21PM +0530, Jagan Teki wrote: > >> Add simple and meaningful kconfig option for rsb.c > >> instead of using MACH type on Makefile. > >> > >> Signed-off-by: Jagan Teki > >> --- > >> arch/arm/mach-sunxi/Kconfig | 10 ++++++++++ > >> arch/arm/mach-sunxi/Makefile | 3 +-- > >> 2 files changed, 11 insertions(+), 2 deletions(-) > >> > >> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig > >> index cf999ab..7ab1990 100644 > >> --- a/arch/arm/mach-sunxi/Kconfig > >> +++ b/arch/arm/mach-sunxi/Kconfig > >> @@ -23,6 +23,14 @@ config MFD_SUN6I_PRCM > >> Support for the PRCM (Power/Reset/Clock Management) unit available > >> in A31 SoC. > >> > >> +config SUNXI_RSB > > > > Following the rest of the convention we have, that would be SUN8I_RSB. > > Followed Linux notation to sync with, where the driver will also have > support AC100. AC100 is a device connected on that bus, not the bus itself. Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: