All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peng Fan <van.freenix@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Date: Fri, 23 Feb 2018 14:02:27 +0800	[thread overview]
Message-ID: <20180223060227.GA325@shlinux2> (raw)
In-Reply-To: <CAOMZO5CjrZvskbYPnzTXaYqto_CTH7zo=+NJAP_OqXZKGJ2T2w@mail.gmail.com>

Hi Fabio,
On Thu, Feb 22, 2018 at 01:40:47PM -0300, Fabio Estevam wrote:
>Hi Peng,
>
>On Sun, Feb 4, 2018 at 7:42 AM, Stefano Babic <sbabic@denx.de> wrote:
>
>> I have merged most of the series, Patch 2 up to patch 30, leaving out
>> just the last one for the EVK. Building mx8evk is fine, I have just
>> noted a couple of checkpatch warnings in mx8mq_evk.h
>> (CONFIG_EXTRA_SETTINGS, line too long). You could fix as well in next
>> post. The rest of patches is fine and will part of my next PR.
>
>Do you plan to post a new version for the patch that adds the mx8mq evk support?

I was a bit busy on other things. Regarding the board support, I still
do not have a good idea about the DDR things. I am thinking moving
the ddr code out into a dedicated bin file and pad to the end of SPL.

What do you think?

Thanks,
Peng.

>
>Thanks
>_______________________________________________
>U-Boot mailing list
>U-Boot at lists.denx.de
>https://lists.denx.de/listinfo/u-boot

-- 

  reply	other threads:[~2018-02-23  6:02 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-10  5:20 [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 01/31] arm: imx: Rework i.MX specific commands to be excluded from SPL Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 02/31] imx: add i.MX8M into Kconfig Peng Fan
2018-01-21 15:53   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 03/31] imx: mx8m: add register definition header file Peng Fan
2018-01-21 15:54   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 04/31] imx: mx8m: add pin " Peng Fan
2018-01-21 15:53   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 05/31] imx: mx8m: add clock driver Peng Fan
2018-01-21 16:28   ` Stefano Babic
2018-01-23  8:58     ` Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 06/31] imx: add sip function Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 07/31] imx: boot_mode: add USB_BOOT entry Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 08/31] imx: cpu: update cpu file to support i.MX8M Peng Fan
2018-01-21 16:28   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 09/31] imx: spl: implement spl_boot_device for i.MX8M Peng Fan
2018-01-21 16:29   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 10/31] imx: add i.MX8MQ SoC Revision and is_mx8m helper Peng Fan
2018-01-21 16:30   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 11/31] imx: add pad settings bit definition for i.MX8M Peng Fan
2018-01-21 16:30   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 12/31] imx: cpu: move speed/temp to common cpu Peng Fan
2018-01-21 16:30   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 13/31] imx: cpu: add cpu speed/grade for i.MX8M Peng Fan
2018-01-21 16:31   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 14/31] imx: refactor imx_get_mac_from_fuse Peng Fan
2018-01-21 16:31   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 15/31] imx: cleanup bootaux Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 16/31] imx: bootaux: support i.MX8M Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 17/31] imx: mx7: move get_boot_device to cpu.c Peng Fan
2018-01-21 16:33   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 18/31] imx: cpu: support get_boot_device for i.MX8M Peng Fan
2018-01-21 16:33   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 19/31] imx: mx7: move mmc env code to mmc_env.c Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 20/31] imx: mx8m: add soc related settings and files Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 21/31] imx: makefile: compile files for i.MX8M Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 22/31] misc: ocotp: add i.MX8M support Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 23/31] mmc: fsl_esdhc: support i.MX8M Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 24/31] imx: lcdif: include i.MX8M Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 25/31] gpio: mxc: add i.MX8M support Peng Fan
2018-01-21 16:33   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 26/31] net: fec: do not access reserved register for i.MX8M Peng Fan
2018-01-21 16:34   ` Stefano Babic
2018-01-10  5:20 ` [U-Boot] [PATCH V5 27/31] net: fec: fix build warnings for 64bits support Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 28/31] imx: imx8mq: add dtsi file Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 29/31] power: pmic/regulator allow dm be omitted by SPL Peng Fan
2018-01-17 12:16   ` Jaehoon Chung
2018-01-10  5:20 ` [U-Boot] [PATCH V5 30/31] imx: mx8m: add ddr controller memory map Peng Fan
2018-01-10  5:20 ` [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support Peng Fan
2018-01-22 14:00   ` Stefano Babic
2018-01-22 15:23     ` Fabio Estevam
2018-01-22 16:20       ` Stefano Babic
2018-01-31 10:25         ` Fabio Estevam
2018-01-31 10:30           ` Stefano Babic
2018-02-04  9:42             ` Stefano Babic
2018-02-22 16:40               ` Fabio Estevam
2018-02-23  6:02                 ` Peng Fan [this message]
2018-02-23 13:37                   ` Fabio Estevam
2018-03-20 19:46                   ` Fabio Estevam
2018-03-21  9:07                     ` Peng Fan
2018-02-23  9:46                 ` Stefano Babic
2018-02-23 13:21                   ` Fabio Estevam
2018-01-23  2:24     ` Peng Fan
2018-01-23  9:52       ` Stefano Babic
     [not found]   ` <88fee187-cf7f-cd2a-659a-eb67ba814178@denx.de>
2018-01-23  1:54     ` Peng Fan
2018-01-23 10:02       ` Stefano Babic
2018-06-20  8:57   ` Paul Kocialkowski
2018-06-20 11:37     ` Andre Przywara
2018-06-20 11:54       ` Paul Kocialkowski
2018-06-20 12:08         ` Paul Kocialkowski
2018-06-20 11:56     ` Peng Fan
2018-06-20 15:24       ` Paul Kocialkowski
2018-06-20 16:12         ` Andre Przywara
2018-06-20 17:16           ` Paul Kocialkowski
2018-06-21  1:07             ` André Przywara
2018-06-21 18:29               ` Todd Weaver
2018-06-21  7:08           ` Wolfgang Denk
2018-01-10 13:08 ` [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK Diego Dorta
2018-01-11  1:16   ` Peng Fan
2018-01-11 12:36     ` Diego Dorta
2018-01-13 10:55       ` Peng Fan
2018-01-16 12:15         ` Diego Dorta
2018-01-16 12:25           ` Peng Fan
2018-01-17 14:59             ` Diego Dorta
2018-01-18  1:13               ` Peng Fan
2018-01-18 14:58                 ` Diego Dorta
2018-01-18  1:24 ` Peng Fan
2018-01-18  8:50   ` Stefano Babic
2018-01-18  8:58     ` Peng Fan
2018-01-22 13:04 ` Diego Dorta
2018-08-31  6:27   ` Jon Nettleton
2018-09-06 13:37     ` Fabio Estevam
2018-09-07  6:03       ` Jon Nettleton
2018-09-07  6:09         ` Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180223060227.GA325@shlinux2 \
    --to=van.freenix@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.