[PATCH v4 1/2] x86/apic: Move pending intr check code into it's own function

[Dou Liyang <douly.fnst@cn.fujitsu.com>]

the pending interrupt check code is mixed with the local APIC setup code,
that looks messy.

Extract the related code, move it into a new function named
apic_pending_intr_clear().

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
---
 arch/x86/kernel/apic/apic.c | 98 ++++++++++++++++++++++++---------------------
 1 file changed, 52 insertions(+), 46 deletions(-)

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 84b244ec49ed..be223ebd1bb3 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1408,6 +1408,56 @@ static void lapic_setup_esr(void)
 			oldvalue, value);
 }
 
+static void apic_pending_intr_clear(void)
+{
+	long long max_loops = cpu_khz ? cpu_khz : 1000000;
+	unsigned long long tsc = 0, ntsc;
+	unsigned int value, queued;
+	int i, j, acked = 0;
+
+	if (boot_cpu_has(X86_FEATURE_TSC))
+		tsc = rdtsc();
+	/*
+	 * After a crash, we no longer service the interrupts and a pending
+	 * interrupt from previous kernel might still have ISR bit set.
+	 *
+	 * Most probably by now CPU has serviced that pending interrupt and
+	 * it might not have done the ack_APIC_irq() because it thought,
+	 * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
+	 * does not clear the ISR bit and cpu thinks it has already serivced
+	 * the interrupt. Hence a vector might get locked. It was noticed
+	 * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
+	 */
+	do {
+		queued = 0;
+		for (i = APIC_ISR_NR - 1; i >= 0; i--)
+			queued |= apic_read(APIC_IRR + i*0x10);
+
+		for (i = APIC_ISR_NR - 1; i >= 0; i--) {
+			value = apic_read(APIC_ISR + i*0x10);
+			for (j = 31; j >= 0; j--) {
+				if (value & (1<<j)) {
+					ack_APIC_irq();
+					acked++;
+				}
+			}
+		}
+		if (acked > 256) {
+			printk(KERN_ERR "LAPIC pending interrupts after %d EOI\n",
+			       acked);
+			break;
+		}
+		if (queued) {
+			if (boot_cpu_has(X86_FEATURE_TSC) && cpu_khz) {
+				ntsc = rdtsc();
+				max_loops = (cpu_khz << 10) - (ntsc - tsc);
+			} else
+				max_loops--;
+		}
+	} while (queued && max_loops > 0);
+	WARN_ON(max_loops <= 0);
+}
+
 /**
  * setup_local_APIC - setup the local APIC
  *
@@ -1417,13 +1467,7 @@ static void lapic_setup_esr(void)
 static void setup_local_APIC(void)
 {
 	int cpu = smp_processor_id();
-	unsigned int value, queued;
-	int i, j, acked = 0;
-	unsigned long long tsc = 0, ntsc;
-	long long max_loops = cpu_khz ? cpu_khz : 1000000;
-
-	if (boot_cpu_has(X86_FEATURE_TSC))
-		tsc = rdtsc();
+	unsigned int value;
 
 	if (disable_apic) {
 		disable_ioapic_support();
@@ -1475,45 +1519,7 @@ static void setup_local_APIC(void)
 	value &= ~APIC_TPRI_MASK;
 	apic_write(APIC_TASKPRI, value);
 
-	/*
-	 * After a crash, we no longer service the interrupts and a pending
-	 * interrupt from previous kernel might still have ISR bit set.
-	 *
-	 * Most probably by now CPU has serviced that pending interrupt and
-	 * it might not have done the ack_APIC_irq() because it thought,
-	 * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
-	 * does not clear the ISR bit and cpu thinks it has already serivced
-	 * the interrupt. Hence a vector might get locked. It was noticed
-	 * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
-	 */
-	do {
-		queued = 0;
-		for (i = APIC_ISR_NR - 1; i >= 0; i--)
-			queued |= apic_read(APIC_IRR + i*0x10);
-
-		for (i = APIC_ISR_NR - 1; i >= 0; i--) {
-			value = apic_read(APIC_ISR + i*0x10);
-			for (j = 31; j >= 0; j--) {
-				if (value & (1<<j)) {
-					ack_APIC_irq();
-					acked++;
-				}
-			}
-		}
-		if (acked > 256) {
-			printk(KERN_ERR "LAPIC pending interrupts after %d EOI\n",
-			       acked);
-			break;
-		}
-		if (queued) {
-			if (boot_cpu_has(X86_FEATURE_TSC) && cpu_khz) {
-				ntsc = rdtsc();
-				max_loops = (cpu_khz << 10) - (ntsc - tsc);
-			} else
-				max_loops--;
-		}
-	} while (queued && max_loops > 0);
-	WARN_ON(max_loops <= 0);
+	apic_pending_intr_clear();
 
 	/*
 	 * Now that we are all set up, enable the APIC
-- 
2.14.3