[PATCH v2 00/16] Implement H3/H5 HDMI driver

[PATCH v2 00/16] Implement H3/H5 HDMI driver

[Jernej Skrabec]

This series implements H3/H5 HDMI driver. It was tested on OrangePi 2 (H3),
OrangePi Plus2e (H3) and OrangePi PC2 (H5) with many resolutions and it
works well. Bug, which prevented correct operation for some resolutions,
is also fixed.

Code is based on linux-next, next-20180226 tag.

Best regards,
Jernej

Changes from v1:
- Fixed build warning on arm64
- Fixed condition in determine_rate function in HDMI PHY clock driver
- Added defines for polarity settings in HDMI PHY
- Added patch to skip LVDS code path altogether if TCON doesn't support it.
- round_rate for NM PLLs now rounds to minimal rate if requested rate is
  lower.
- set_rate for NM PLLs doesn't fail if requested rate is lower than minimal
  (round_rate is called before which already guarantees that rate is not
   lower than minimal).

Jernej Skrabec (16):
  clk: sunxi-ng: Add check for minimal rate to NM PLLs
  clk: sunxi-ng: h3: h5: Add minimal rate for video PLL
  clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate
  clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO
  dt-bindings: display: sun4i-drm: Add compatibles for H3 HDMI pipeline
  drm/sun4i: Don't process LVDS if TCON doesn't support it
  drm/sun4i: Add support for H3 display engine
  drm/sun4i: Add support for H3 mixer 0
  drm/sun4i: Fix polarity configuration for DW HDMI PHY
  drm/sun4i: Add support for variants to DW HDMI PHY
  drm/sun4i: Move and expand DW HDMI PHY register macros
  drm/sun4i: Add support for H3 HDMI PHY variant
  drm/sun4i: Allow building on arm64
  ARM: dts: sunxi: h3/h5: Add HDMI pipeline
  ARM: dts: sun8i: h3: Enable HDMI output on H3 boards
  ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards

 .../bindings/display/sunxi/sun4i-drm.txt           |   6 +
 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts    |  25 ++
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts          |  25 ++
 arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts |  25 ++
 arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts           |  25 ++
 arch/arm/boot/dts/sun8i-h3-orangepi-2.dts          |  25 ++
 arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts       |  25 ++
 arch/arm/boot/dts/sun8i-h3-orangepi-one.dts        |  24 ++
 arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts         |  25 ++
 arch/arm/boot/dts/sunxi-h3-h5.dtsi                 | 108 ++++++
 .../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts  |  25 ++
 .../dts/allwinner/sun50i-h5-orangepi-prime.dts     |  25 ++
 .../allwinner/sun50i-h5-orangepi-zero-plus2.dts    |  25 ++
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c                |  32 +-
 drivers/clk/sunxi-ng/ccu-sun8i-h3.h                |   4 +-
 drivers/clk/sunxi-ng/ccu_nm.c                      |  11 +-
 drivers/clk/sunxi-ng/ccu_nm.h                      |  27 ++
 drivers/gpu/drm/sun4i/Kconfig                      |   2 +-
 drivers/gpu/drm/sun4i/Makefile                     |   1 +
 drivers/gpu/drm/sun4i/sun4i_drv.c                  |   1 +
 drivers/gpu/drm/sun4i/sun4i_tcon.c                 | 120 +++----
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h              | 157 ++++++++-
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c             | 369 ++++++++++++++++++---
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c         | 132 ++++++++
 drivers/gpu/drm/sun4i/sun8i_mixer.c                |  12 +
 include/dt-bindings/clock/sun8i-h3-ccu.h           |   2 +
 26 files changed, 1129 insertions(+), 129 deletions(-)
 create mode 100644 drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c

-- 
2.16.2

[PATCH v2 00/16] Implement H3/H5 HDMI driver

[Jernej Skrabec]

This series implements H3/H5 HDMI driver. It was tested on OrangePi 2 (H3),
OrangePi Plus2e (H3) and OrangePi PC2 (H5) with many resolutions and it
works well. Bug, which prevented correct operation for some resolutions,
is also fixed.

Code is based on linux-next, next-20180226 tag.

Best regards,
Jernej

Changes from v1:
- Fixed build warning on arm64
- Fixed condition in determine_rate function in HDMI PHY clock driver
- Added defines for polarity settings in HDMI PHY
- Added patch to skip LVDS code path altogether if TCON doesn't support it.
- round_rate for NM PLLs now rounds to minimal rate if requested rate is
  lower.
- set_rate for NM PLLs doesn't fail if requested rate is lower than minimal
  (round_rate is called before which already guarantees that rate is not
   lower than minimal).

Jernej Skrabec (16):
  clk: sunxi-ng: Add check for minimal rate to NM PLLs
  clk: sunxi-ng: h3: h5: Add minimal rate for video PLL
  clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate
  clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO
  dt-bindings: display: sun4i-drm: Add compatibles for H3 HDMI pipeline
  drm/sun4i: Don't process LVDS if TCON doesn't support it
  drm/sun4i: Add support for H3 display engine
  drm/sun4i: Add support for H3 mixer 0
  drm/sun4i: Fix polarity configuration for DW HDMI PHY
  drm/sun4i: Add support for variants to DW HDMI PHY
  drm/sun4i: Move and expand DW HDMI PHY register macros
  drm/sun4i: Add support for H3 HDMI PHY variant
  drm/sun4i: Allow building on arm64
  ARM: dts: sunxi: h3/h5: Add HDMI pipeline
  ARM: dts: sun8i: h3: Enable HDMI output on H3 boards
  ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards

 .../bindings/display/sunxi/sun4i-drm.txt           |   6 +
 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts    |  25 ++
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts          |  25 ++
 arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts |  25 ++
 arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts           |  25 ++
 arch/arm/boot/dts/sun8i-h3-orangepi-2.dts          |  25 ++
 arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts       |  25 ++
 arch/arm/boot/dts/sun8i-h3-orangepi-one.dts        |  24 ++
 arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts         |  25 ++
 arch/arm/boot/dts/sunxi-h3-h5.dtsi                 | 108 ++++++
 .../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts  |  25 ++
 .../dts/allwinner/sun50i-h5-orangepi-prime.dts     |  25 ++
 .../allwinner/sun50i-h5-orangepi-zero-plus2.dts    |  25 ++
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c                |  32 +-
 drivers/clk/sunxi-ng/ccu-sun8i-h3.h                |   4 +-
 drivers/clk/sunxi-ng/ccu_nm.c                      |  11 +-
 drivers/clk/sunxi-ng/ccu_nm.h                      |  27 ++
 drivers/gpu/drm/sun4i/Kconfig                      |   2 +-
 drivers/gpu/drm/sun4i/Makefile                     |   1 +
 drivers/gpu/drm/sun4i/sun4i_drv.c                  |   1 +
 drivers/gpu/drm/sun4i/sun4i_tcon.c                 | 120 +++----
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h              | 157 ++++++++-
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c             | 369 ++++++++++++++++++---
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c         | 132 ++++++++
 drivers/gpu/drm/sun4i/sun8i_mixer.c                |  12 +
 include/dt-bindings/clock/sun8i-h3-ccu.h           |   2 +
 26 files changed, 1129 insertions(+), 129 deletions(-)
 create mode 100644 drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c

-- 
2.16.2

[PATCH v2 00/16] Implement H3/H5 HDMI driver

[Jernej Skrabec]

This series implements H3/H5 HDMI driver. It was tested on OrangePi 2 (H3),
OrangePi Plus2e (H3) and OrangePi PC2 (H5) with many resolutions and it
works well. Bug, which prevented correct operation for some resolutions,
is also fixed.

Code is based on linux-next, next-20180226 tag.

Best regards,
Jernej

Changes from v1:
- Fixed build warning on arm64
- Fixed condition in determine_rate function in HDMI PHY clock driver
- Added defines for polarity settings in HDMI PHY
- Added patch to skip LVDS code path altogether if TCON doesn't support it.
- round_rate for NM PLLs now rounds to minimal rate if requested rate is
  lower.
- set_rate for NM PLLs doesn't fail if requested rate is lower than minimal
  (round_rate is called before which already guarantees that rate is not
   lower than minimal).

Jernej Skrabec (16):
  clk: sunxi-ng: Add check for minimal rate to NM PLLs
  clk: sunxi-ng: h3: h5: Add minimal rate for video PLL
  clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate
  clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO
  dt-bindings: display: sun4i-drm: Add compatibles for H3 HDMI pipeline
  drm/sun4i: Don't process LVDS if TCON doesn't support it
  drm/sun4i: Add support for H3 display engine
  drm/sun4i: Add support for H3 mixer 0
  drm/sun4i: Fix polarity configuration for DW HDMI PHY
  drm/sun4i: Add support for variants to DW HDMI PHY
  drm/sun4i: Move and expand DW HDMI PHY register macros
  drm/sun4i: Add support for H3 HDMI PHY variant
  drm/sun4i: Allow building on arm64
  ARM: dts: sunxi: h3/h5: Add HDMI pipeline
  ARM: dts: sun8i: h3: Enable HDMI output on H3 boards
  ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards

 .../bindings/display/sunxi/sun4i-drm.txt           |   6 +
 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts    |  25 ++
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts          |  25 ++
 arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts |  25 ++
 arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts           |  25 ++
 arch/arm/boot/dts/sun8i-h3-orangepi-2.dts          |  25 ++
 arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts       |  25 ++
 arch/arm/boot/dts/sun8i-h3-orangepi-one.dts        |  24 ++
 arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts         |  25 ++
 arch/arm/boot/dts/sunxi-h3-h5.dtsi                 | 108 ++++++
 .../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts  |  25 ++
 .../dts/allwinner/sun50i-h5-orangepi-prime.dts     |  25 ++
 .../allwinner/sun50i-h5-orangepi-zero-plus2.dts    |  25 ++
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c                |  32 +-
 drivers/clk/sunxi-ng/ccu-sun8i-h3.h                |   4 +-
 drivers/clk/sunxi-ng/ccu_nm.c                      |  11 +-
 drivers/clk/sunxi-ng/ccu_nm.h                      |  27 ++
 drivers/gpu/drm/sun4i/Kconfig                      |   2 +-
 drivers/gpu/drm/sun4i/Makefile                     |   1 +
 drivers/gpu/drm/sun4i/sun4i_drv.c                  |   1 +
 drivers/gpu/drm/sun4i/sun4i_tcon.c                 | 120 +++----
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h              | 157 ++++++++-
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c             | 369 ++++++++++++++++++---
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c         | 132 ++++++++
 drivers/gpu/drm/sun4i/sun8i_mixer.c                |  12 +
 include/dt-bindings/clock/sun8i-h3-ccu.h           |   2 +
 26 files changed, 1129 insertions(+), 129 deletions(-)
 create mode 100644 drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c

-- 
2.16.2

[PATCH v2 01/16] clk: sunxi-ng: Add check for minimal rate to NM PLLs

[Jernej Skrabec]

Some NM PLLs doesn't work well when their output clock rate is set below
certain rate.

Add support for that constrain.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/clk/sunxi-ng/ccu_nm.c | 11 +++++++----
 drivers/clk/sunxi-ng/ccu_nm.h | 27 +++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
index a16de092bf94..7fc743c78c1b 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.c
+++ b/drivers/clk/sunxi-ng/ccu_nm.c
@@ -20,7 +20,7 @@ struct _ccu_nm {
 };
 
 static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
-			     struct _ccu_nm *nm)
+			     unsigned long min_rate, struct _ccu_nm *nm)
 {
 	unsigned long best_rate = 0;
 	unsigned long best_n = 0, best_m = 0;
@@ -30,7 +30,7 @@ static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
 		for (_m = nm->min_m; _m <= nm->max_m; _m++) {
 			unsigned long tmp_rate = parent * _n  / _m;
 
-			if (tmp_rate > rate)
+			if (tmp_rate > rate || tmp_rate < min_rate)
 				continue;
 
 			if ((rate - tmp_rate) < (rate - best_rate)) {
@@ -117,6 +117,9 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
 	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
 		rate *= nm->fixed_post_div;
 
+	if (rate < nm->min_rate)
+		rate = nm->min_rate;
+
 	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
 		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
 			rate /= nm->fixed_post_div;
@@ -134,7 +137,7 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
 	_nm.min_m = 1;
 	_nm.max_m = nm->m.max ?: 1 << nm->m.width;
 
-	ccu_nm_find_best(*parent_rate, rate, &_nm);
+	ccu_nm_find_best(*parent_rate, rate, nm->min_rate, &_nm);
 	rate = *parent_rate * _nm.n / _nm.m;
 
 	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
@@ -186,7 +189,7 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
 					   &_nm.m, &_nm.n);
 	} else {
 		ccu_sdm_helper_disable(&nm->common, &nm->sdm);
-		ccu_nm_find_best(parent_rate, rate, &_nm);
+		ccu_nm_find_best(parent_rate, rate, nm->min_rate, &_nm);
 	}
 
 	spin_lock_irqsave(nm->common.lock, flags);
diff --git a/drivers/clk/sunxi-ng/ccu_nm.h b/drivers/clk/sunxi-ng/ccu_nm.h
index eba586b4c7d0..1d8b459c50b7 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.h
+++ b/drivers/clk/sunxi-ng/ccu_nm.h
@@ -37,6 +37,7 @@ struct ccu_nm {
 	struct ccu_sdm_internal		sdm;
 
 	unsigned int		fixed_post_div;
+	unsigned int		min_rate;
 
 	struct ccu_common	common;
 };
@@ -88,6 +89,32 @@ struct ccu_nm {
 		},							\
 	}
 
+#define SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN(_struct, _name, _parent,	\
+					     _reg, _min_rate,		\
+					     _nshift, _nwidth,		\
+					     _mshift, _mwidth,		\
+					     _frac_en, _frac_sel,	\
+					     _frac_rate_0, _frac_rate_1,\
+					     _gate, _lock, _flags)	\
+	struct ccu_nm _struct = {					\
+		.enable		= _gate,				\
+		.lock		= _lock,				\
+		.n		= _SUNXI_CCU_MULT(_nshift, _nwidth),	\
+		.m		= _SUNXI_CCU_DIV(_mshift, _mwidth),	\
+		.frac		= _SUNXI_CCU_FRAC(_frac_en, _frac_sel,	\
+						  _frac_rate_0,		\
+						  _frac_rate_1),	\
+		.min_rate	= _min_rate,				\
+		.common		= {					\
+			.reg		= _reg,				\
+			.features	= CCU_FEATURE_FRACTIONAL,	\
+			.hw.init	= CLK_HW_INIT(_name,		\
+						      _parent,		\
+						      &ccu_nm_ops,	\
+						      _flags),		\
+		},							\
+	}
+
 #define SUNXI_CCU_NM_WITH_GATE_LOCK(_struct, _name, _parent, _reg,	\
 				    _nshift, _nwidth,			\
 				    _mshift, _mwidth,			\
-- 
2.16.2

[PATCH v2 01/16] clk: sunxi-ng: Add check for minimal rate to NM PLLs

[Jernej Skrabec]

Some NM PLLs doesn't work well when their output clock rate is set below
certain rate.

Add support for that constrain.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 drivers/clk/sunxi-ng/ccu_nm.c | 11 +++++++----
 drivers/clk/sunxi-ng/ccu_nm.h | 27 +++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
index a16de092bf94..7fc743c78c1b 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.c
+++ b/drivers/clk/sunxi-ng/ccu_nm.c
@@ -20,7 +20,7 @@ struct _ccu_nm {
 };
 
 static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
-			     struct _ccu_nm *nm)
+			     unsigned long min_rate, struct _ccu_nm *nm)
 {
 	unsigned long best_rate = 0;
 	unsigned long best_n = 0, best_m = 0;
@@ -30,7 +30,7 @@ static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
 		for (_m = nm->min_m; _m <= nm->max_m; _m++) {
 			unsigned long tmp_rate = parent * _n  / _m;
 
-			if (tmp_rate > rate)
+			if (tmp_rate > rate || tmp_rate < min_rate)
 				continue;
 
 			if ((rate - tmp_rate) < (rate - best_rate)) {
@@ -117,6 +117,9 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
 	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
 		rate *= nm->fixed_post_div;
 
+	if (rate < nm->min_rate)
+		rate = nm->min_rate;
+
 	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
 		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
 			rate /= nm->fixed_post_div;
@@ -134,7 +137,7 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
 	_nm.min_m = 1;
 	_nm.max_m = nm->m.max ?: 1 << nm->m.width;
 
-	ccu_nm_find_best(*parent_rate, rate, &_nm);
+	ccu_nm_find_best(*parent_rate, rate, nm->min_rate, &_nm);
 	rate = *parent_rate * _nm.n / _nm.m;
 
 	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
@@ -186,7 +189,7 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
 					   &_nm.m, &_nm.n);
 	} else {
 		ccu_sdm_helper_disable(&nm->common, &nm->sdm);
-		ccu_nm_find_best(parent_rate, rate, &_nm);
+		ccu_nm_find_best(parent_rate, rate, nm->min_rate, &_nm);
 	}
 
 	spin_lock_irqsave(nm->common.lock, flags);
diff --git a/drivers/clk/sunxi-ng/ccu_nm.h b/drivers/clk/sunxi-ng/ccu_nm.h
index eba586b4c7d0..1d8b459c50b7 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.h
+++ b/drivers/clk/sunxi-ng/ccu_nm.h
@@ -37,6 +37,7 @@ struct ccu_nm {
 	struct ccu_sdm_internal		sdm;
 
 	unsigned int		fixed_post_div;
+	unsigned int		min_rate;
 
 	struct ccu_common	common;
 };
@@ -88,6 +89,32 @@ struct ccu_nm {
 		},							\
 	}
 
+#define SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN(_struct, _name, _parent,	\
+					     _reg, _min_rate,		\
+					     _nshift, _nwidth,		\
+					     _mshift, _mwidth,		\
+					     _frac_en, _frac_sel,	\
+					     _frac_rate_0, _frac_rate_1,\
+					     _gate, _lock, _flags)	\
+	struct ccu_nm _struct = {					\
+		.enable		= _gate,				\
+		.lock		= _lock,				\
+		.n		= _SUNXI_CCU_MULT(_nshift, _nwidth),	\
+		.m		= _SUNXI_CCU_DIV(_mshift, _mwidth),	\
+		.frac		= _SUNXI_CCU_FRAC(_frac_en, _frac_sel,	\
+						  _frac_rate_0,		\
+						  _frac_rate_1),	\
+		.min_rate	= _min_rate,				\
+		.common		= {					\
+			.reg		= _reg,				\
+			.features	= CCU_FEATURE_FRACTIONAL,	\
+			.hw.init	= CLK_HW_INIT(_name,		\
+						      _parent,		\
+						      &ccu_nm_ops,	\
+						      _flags),		\
+		},							\
+	}
+
 #define SUNXI_CCU_NM_WITH_GATE_LOCK(_struct, _name, _parent, _reg,	\
 				    _nshift, _nwidth,			\
 				    _mshift, _mwidth,			\
-- 
2.16.2

[PATCH v2 01/16] clk: sunxi-ng: Add check for minimal rate to NM PLLs

[Jernej Skrabec]

Some NM PLLs doesn't work well when their output clock rate is set below
certain rate.

Add support for that constrain.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/clk/sunxi-ng/ccu_nm.c | 11 +++++++----
 drivers/clk/sunxi-ng/ccu_nm.h | 27 +++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
index a16de092bf94..7fc743c78c1b 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.c
+++ b/drivers/clk/sunxi-ng/ccu_nm.c
@@ -20,7 +20,7 @@ struct _ccu_nm {
 };
 
 static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
-			     struct _ccu_nm *nm)
+			     unsigned long min_rate, struct _ccu_nm *nm)
 {
 	unsigned long best_rate = 0;
 	unsigned long best_n = 0, best_m = 0;
@@ -30,7 +30,7 @@ static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
 		for (_m = nm->min_m; _m <= nm->max_m; _m++) {
 			unsigned long tmp_rate = parent * _n  / _m;
 
-			if (tmp_rate > rate)
+			if (tmp_rate > rate || tmp_rate < min_rate)
 				continue;
 
 			if ((rate - tmp_rate) < (rate - best_rate)) {
@@ -117,6 +117,9 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
 	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
 		rate *= nm->fixed_post_div;
 
+	if (rate < nm->min_rate)
+		rate = nm->min_rate;
+
 	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
 		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
 			rate /= nm->fixed_post_div;
@@ -134,7 +137,7 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
 	_nm.min_m = 1;
 	_nm.max_m = nm->m.max ?: 1 << nm->m.width;
 
-	ccu_nm_find_best(*parent_rate, rate, &_nm);
+	ccu_nm_find_best(*parent_rate, rate, nm->min_rate, &_nm);
 	rate = *parent_rate * _nm.n / _nm.m;
 
 	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
@@ -186,7 +189,7 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
 					   &_nm.m, &_nm.n);
 	} else {
 		ccu_sdm_helper_disable(&nm->common, &nm->sdm);
-		ccu_nm_find_best(parent_rate, rate, &_nm);
+		ccu_nm_find_best(parent_rate, rate, nm->min_rate, &_nm);
 	}
 
 	spin_lock_irqsave(nm->common.lock, flags);
diff --git a/drivers/clk/sunxi-ng/ccu_nm.h b/drivers/clk/sunxi-ng/ccu_nm.h
index eba586b4c7d0..1d8b459c50b7 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.h
+++ b/drivers/clk/sunxi-ng/ccu_nm.h
@@ -37,6 +37,7 @@ struct ccu_nm {
 	struct ccu_sdm_internal		sdm;
 
 	unsigned int		fixed_post_div;
+	unsigned int		min_rate;
 
 	struct ccu_common	common;
 };
@@ -88,6 +89,32 @@ struct ccu_nm {
 		},							\
 	}
 
+#define SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN(_struct, _name, _parent,	\
+					     _reg, _min_rate,		\
+					     _nshift, _nwidth,		\
+					     _mshift, _mwidth,		\
+					     _frac_en, _frac_sel,	\
+					     _frac_rate_0, _frac_rate_1,\
+					     _gate, _lock, _flags)	\
+	struct ccu_nm _struct = {					\
+		.enable		= _gate,				\
+		.lock		= _lock,				\
+		.n		= _SUNXI_CCU_MULT(_nshift, _nwidth),	\
+		.m		= _SUNXI_CCU_DIV(_mshift, _mwidth),	\
+		.frac		= _SUNXI_CCU_FRAC(_frac_en, _frac_sel,	\
+						  _frac_rate_0,		\
+						  _frac_rate_1),	\
+		.min_rate	= _min_rate,				\
+		.common		= {					\
+			.reg		= _reg,				\
+			.features	= CCU_FEATURE_FRACTIONAL,	\
+			.hw.init	= CLK_HW_INIT(_name,		\
+						      _parent,		\
+						      &ccu_nm_ops,	\
+						      _flags),		\
+		},							\
+	}
+
 #define SUNXI_CCU_NM_WITH_GATE_LOCK(_struct, _name, _parent, _reg,	\
 				    _nshift, _nwidth,			\
 				    _mshift, _mwidth,			\
-- 
2.16.2

[PATCH v2 02/16] clk: sunxi-ng: h3: h5: Add minimal rate for video PLL

[Jernej Skrabec]

Although user manuals for H3 and H5 SoCs state that minimal rate
supported by video PLL is around 30 MHz, it seems that in reality
minimal rate is around 192 MHz.

Experiments showed that any rate below 96 MHz doesn't produce any video
output at all. Even at this frequency, stable output depends on right
factors. For example, when N = 4 and M = 1, output is stable and when N
= 8 and M = 2, it's not.

BSP clock driver suggest that minimum stable frequency is 192 MHz. That
would also be in line with A64 SoC, which has similar periphery.

Set minimal video PLL rate for H3/H5 to 192 MHz.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
index 29bc0566b776..b9f39078c0b2 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -69,17 +69,18 @@ static SUNXI_CCU_NM_WITH_SDM_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
 				       BIT(28),	/* lock */
 				       CLK_SET_RATE_UNGATE);
 
-static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
-					"osc24M", 0x0010,
-					8, 7,		/* N */
-					0, 4,		/* M */
-					BIT(24),	/* frac enable */
-					BIT(25),	/* frac select */
-					270000000,	/* frac rate 0 */
-					297000000,	/* frac rate 1 */
-					BIT(31),	/* gate */
-					BIT(28),	/* lock */
-					CLK_SET_RATE_UNGATE);
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN(pll_video_clk, "pll-video",
+					    "osc24M", 0x0010,
+					    192000000,	/* Minimum rate */
+					    8, 7,	/* N */
+					    0, 4,	/* M */
+					    BIT(24),	/* frac enable */
+					    BIT(25),	/* frac select */
+					    270000000,	/* frac rate 0 */
+					    297000000,	/* frac rate 1 */
+					    BIT(31),	/* gate */
+					    BIT(28),	/* lock */
+					    CLK_SET_RATE_UNGATE);
 
 static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
 					"osc24M", 0x0018,
-- 
2.16.2

[PATCH v2 02/16] clk: sunxi-ng: h3: h5: Add minimal rate for video PLL

[Jernej Skrabec]

Although user manuals for H3 and H5 SoCs state that minimal rate
supported by video PLL is around 30 MHz, it seems that in reality
minimal rate is around 192 MHz.

Experiments showed that any rate below 96 MHz doesn't produce any video
output at all. Even at this frequency, stable output depends on right
factors. For example, when N = 4 and M = 1, output is stable and when N
= 8 and M = 2, it's not.

BSP clock driver suggest that minimum stable frequency is 192 MHz. That
would also be in line with A64 SoC, which has similar periphery.

Set minimal video PLL rate for H3/H5 to 192 MHz.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
index 29bc0566b776..b9f39078c0b2 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -69,17 +69,18 @@ static SUNXI_CCU_NM_WITH_SDM_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
 				       BIT(28),	/* lock */
 				       CLK_SET_RATE_UNGATE);
 
-static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
-					"osc24M", 0x0010,
-					8, 7,		/* N */
-					0, 4,		/* M */
-					BIT(24),	/* frac enable */
-					BIT(25),	/* frac select */
-					270000000,	/* frac rate 0 */
-					297000000,	/* frac rate 1 */
-					BIT(31),	/* gate */
-					BIT(28),	/* lock */
-					CLK_SET_RATE_UNGATE);
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN(pll_video_clk, "pll-video",
+					    "osc24M", 0x0010,
+					    192000000,	/* Minimum rate */
+					    8, 7,	/* N */
+					    0, 4,	/* M */
+					    BIT(24),	/* frac enable */
+					    BIT(25),	/* frac select */
+					    270000000,	/* frac rate 0 */
+					    297000000,	/* frac rate 1 */
+					    BIT(31),	/* gate */
+					    BIT(28),	/* lock */
+					    CLK_SET_RATE_UNGATE);
 
 static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
 					"osc24M", 0x0018,
-- 
2.16.2

[PATCH v2 02/16] clk: sunxi-ng: h3: h5: Add minimal rate for video PLL

[Jernej Skrabec]

Although user manuals for H3 and H5 SoCs state that minimal rate
supported by video PLL is around 30 MHz, it seems that in reality
minimal rate is around 192 MHz.

Experiments showed that any rate below 96 MHz doesn't produce any video
output at all. Even at this frequency, stable output depends on right
factors. For example, when N = 4 and M = 1, output is stable and when N
= 8 and M = 2, it's not.

BSP clock driver suggest that minimum stable frequency is 192 MHz. That
would also be in line with A64 SoC, which has similar periphery.

Set minimal video PLL rate for H3/H5 to 192 MHz.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
index 29bc0566b776..b9f39078c0b2 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -69,17 +69,18 @@ static SUNXI_CCU_NM_WITH_SDM_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
 				       BIT(28),	/* lock */
 				       CLK_SET_RATE_UNGATE);
 
-static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
-					"osc24M", 0x0010,
-					8, 7,		/* N */
-					0, 4,		/* M */
-					BIT(24),	/* frac enable */
-					BIT(25),	/* frac select */
-					270000000,	/* frac rate 0 */
-					297000000,	/* frac rate 1 */
-					BIT(31),	/* gate */
-					BIT(28),	/* lock */
-					CLK_SET_RATE_UNGATE);
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN(pll_video_clk, "pll-video",
+					    "osc24M", 0x0010,
+					    192000000,	/* Minimum rate */
+					    8, 7,	/* N */
+					    0, 4,	/* M */
+					    BIT(24),	/* frac enable */
+					    BIT(25),	/* frac select */
+					    270000000,	/* frac rate 0 */
+					    297000000,	/* frac rate 1 */
+					    BIT(31),	/* gate */
+					    BIT(28),	/* lock */
+					    CLK_SET_RATE_UNGATE);
 
 static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
 					"osc24M", 0x0018,
-- 
2.16.2

[PATCH v2 03/16] clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate

[Jernej Skrabec]

Some units have to be able to set it's own clock precisely to work
correctly. Allow them to do so by adding CLK_SET_RATE_PARENT flag.

Add this flag to DE, TCON and HDMI clocks.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
index b9f39078c0b2..77ed0b0ba681 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -452,11 +452,13 @@ static SUNXI_CCU_GATE(dram_ts_clk,	"dram-ts",	"dram",
 
 static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
 static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
-				 0x104, 0, 4, 24, 3, BIT(31), 0);
+				 0x104, 0, 4, 24, 3, BIT(31),
+				 CLK_SET_RATE_PARENT);
 
 static const char * const tcon_parents[] = { "pll-video" };
 static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
-				 0x118, 0, 4, 24, 3, BIT(31), 0);
+				 0x118, 0, 4, 24, 3, BIT(31),
+				 CLK_SET_RATE_PARENT);
 
 static const char * const tve_parents[] = { "pll-de", "pll-periph1" };
 static SUNXI_CCU_M_WITH_MUX_GATE(tve_clk, "tve", tve_parents,
@@ -487,7 +489,8 @@ static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
 
 static const char * const hdmi_parents[] = { "pll-video" };
 static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
-				 0x150, 0, 4, 24, 2, BIT(31), 0);
+				 0x150, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_GATE(hdmi_ddc_clk,	"hdmi-ddc",	"osc24M",
 		      0x154, BIT(31), 0);
-- 
2.16.2

[PATCH v2 03/16] clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate

[Jernej Skrabec]

Some units have to be able to set it's own clock precisely to work
correctly. Allow them to do so by adding CLK_SET_RATE_PARENT flag.

Add this flag to DE, TCON and HDMI clocks.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
index b9f39078c0b2..77ed0b0ba681 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -452,11 +452,13 @@ static SUNXI_CCU_GATE(dram_ts_clk,	"dram-ts",	"dram",
 
 static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
 static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
-				 0x104, 0, 4, 24, 3, BIT(31), 0);
+				 0x104, 0, 4, 24, 3, BIT(31),
+				 CLK_SET_RATE_PARENT);
 
 static const char * const tcon_parents[] = { "pll-video" };
 static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
-				 0x118, 0, 4, 24, 3, BIT(31), 0);
+				 0x118, 0, 4, 24, 3, BIT(31),
+				 CLK_SET_RATE_PARENT);
 
 static const char * const tve_parents[] = { "pll-de", "pll-periph1" };
 static SUNXI_CCU_M_WITH_MUX_GATE(tve_clk, "tve", tve_parents,
@@ -487,7 +489,8 @@ static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
 
 static const char * const hdmi_parents[] = { "pll-video" };
 static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
-				 0x150, 0, 4, 24, 2, BIT(31), 0);
+				 0x150, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_GATE(hdmi_ddc_clk,	"hdmi-ddc",	"osc24M",
 		      0x154, BIT(31), 0);
-- 
2.16.2

[PATCH v2 03/16] clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate

[Jernej Skrabec]

Some units have to be able to set it's own clock precisely to work
correctly. Allow them to do so by adding CLK_SET_RATE_PARENT flag.

Add this flag to DE, TCON and HDMI clocks.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
index b9f39078c0b2..77ed0b0ba681 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -452,11 +452,13 @@ static SUNXI_CCU_GATE(dram_ts_clk,	"dram-ts",	"dram",
 
 static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
 static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
-				 0x104, 0, 4, 24, 3, BIT(31), 0);
+				 0x104, 0, 4, 24, 3, BIT(31),
+				 CLK_SET_RATE_PARENT);
 
 static const char * const tcon_parents[] = { "pll-video" };
 static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
-				 0x118, 0, 4, 24, 3, BIT(31), 0);
+				 0x118, 0, 4, 24, 3, BIT(31),
+				 CLK_SET_RATE_PARENT);
 
 static const char * const tve_parents[] = { "pll-de", "pll-periph1" };
 static SUNXI_CCU_M_WITH_MUX_GATE(tve_clk, "tve", tve_parents,
@@ -487,7 +489,8 @@ static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
 
 static const char * const hdmi_parents[] = { "pll-video" };
 static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
-				 0x150, 0, 4, 24, 2, BIT(31), 0);
+				 0x150, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_GATE(hdmi_ddc_clk,	"hdmi-ddc",	"osc24M",
 		      0x154, BIT(31), 0);
-- 
2.16.2

[PATCH v2 04/16] clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO

[Jernej Skrabec]

CLK_PLL_VIDEO needs to be referenced in HDMI DT entry as a possible
PHY clock parent.

Export it so it can be used later in DT.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.h      | 4 +++-
 include/dt-bindings/clock/sun8i-h3-ccu.h | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.h b/drivers/clk/sunxi-ng/ccu-sun8i-h3.h
index 1b4baea37d81..73d7392c968c 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.h
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.h
@@ -26,7 +26,9 @@
 #define CLK_PLL_AUDIO_2X	3
 #define CLK_PLL_AUDIO_4X	4
 #define CLK_PLL_AUDIO_8X	5
-#define CLK_PLL_VIDEO		6
+
+/* PLL_VIDEO is exported */
+
 #define CLK_PLL_VE		7
 #define CLK_PLL_DDR		8
 
diff --git a/include/dt-bindings/clock/sun8i-h3-ccu.h b/include/dt-bindings/clock/sun8i-h3-ccu.h
index e139fe5c62ec..c5f7e9a70968 100644
--- a/include/dt-bindings/clock/sun8i-h3-ccu.h
+++ b/include/dt-bindings/clock/sun8i-h3-ccu.h
@@ -43,6 +43,8 @@
 #ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_
 #define _DT_BINDINGS_CLK_SUN8I_H3_H_
 
+#define CLK_PLL_VIDEO		6
+
 #define CLK_PLL_PERIPH0		9
 
 #define CLK_CPUX		14
-- 
2.16.2

[PATCH v2 04/16] clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO

[Jernej Skrabec]

CLK_PLL_VIDEO needs to be referenced in HDMI DT entry as a possible
PHY clock parent.

Export it so it can be used later in DT.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.h      | 4 +++-
 include/dt-bindings/clock/sun8i-h3-ccu.h | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.h b/drivers/clk/sunxi-ng/ccu-sun8i-h3.h
index 1b4baea37d81..73d7392c968c 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.h
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.h
@@ -26,7 +26,9 @@
 #define CLK_PLL_AUDIO_2X	3
 #define CLK_PLL_AUDIO_4X	4
 #define CLK_PLL_AUDIO_8X	5
-#define CLK_PLL_VIDEO		6
+
+/* PLL_VIDEO is exported */
+
 #define CLK_PLL_VE		7
 #define CLK_PLL_DDR		8
 
diff --git a/include/dt-bindings/clock/sun8i-h3-ccu.h b/include/dt-bindings/clock/sun8i-h3-ccu.h
index e139fe5c62ec..c5f7e9a70968 100644
--- a/include/dt-bindings/clock/sun8i-h3-ccu.h
+++ b/include/dt-bindings/clock/sun8i-h3-ccu.h
@@ -43,6 +43,8 @@
 #ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_
 #define _DT_BINDINGS_CLK_SUN8I_H3_H_
 
+#define CLK_PLL_VIDEO		6
+
 #define CLK_PLL_PERIPH0		9
 
 #define CLK_CPUX		14
-- 
2.16.2

[PATCH v2 04/16] clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO

[Jernej Skrabec]

CLK_PLL_VIDEO needs to be referenced in HDMI DT entry as a possible
PHY clock parent.

Export it so it can be used later in DT.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.h      | 4 +++-
 include/dt-bindings/clock/sun8i-h3-ccu.h | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.h b/drivers/clk/sunxi-ng/ccu-sun8i-h3.h
index 1b4baea37d81..73d7392c968c 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.h
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.h
@@ -26,7 +26,9 @@
 #define CLK_PLL_AUDIO_2X	3
 #define CLK_PLL_AUDIO_4X	4
 #define CLK_PLL_AUDIO_8X	5
-#define CLK_PLL_VIDEO		6
+
+/* PLL_VIDEO is exported */
+
 #define CLK_PLL_VE		7
 #define CLK_PLL_DDR		8
 
diff --git a/include/dt-bindings/clock/sun8i-h3-ccu.h b/include/dt-bindings/clock/sun8i-h3-ccu.h
index e139fe5c62ec..c5f7e9a70968 100644
--- a/include/dt-bindings/clock/sun8i-h3-ccu.h
+++ b/include/dt-bindings/clock/sun8i-h3-ccu.h
@@ -43,6 +43,8 @@
 #ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_
 #define _DT_BINDINGS_CLK_SUN8I_H3_H_
 
+#define CLK_PLL_VIDEO		6
+
 #define CLK_PLL_PERIPH0		9
 
 #define CLK_CPUX		14
-- 
2.16.2

[PATCH v2 05/16] dt-bindings: display: sun4i-drm: Add compatibles for H3 HDMI pipeline

[Jernej Skrabec]

Add missing compatibles for H3 HDMI pipeline. These compatibles can also
be used with H5 SoC.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index b995bfee734a..8bdef4920edc 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -102,6 +102,7 @@ DWC HDMI PHY
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun8i-a83t-hdmi-phy
+    * allwinner,sun8i-h3-hdmi-phy
   - reg: base address and size of memory-mapped region
   - clocks: phandles to the clocks feeding the HDMI PHY
     * bus: the HDMI PHY interface clock
@@ -110,6 +111,9 @@ Required properties:
   - resets: phandle to the reset controller driving the PHY
   - reset-names: must be "phy"
 
+H3 HDMI PHY requires additional clock:
+  - pll-0: parent of phy clock
+
 TV Encoder
 ----------
 
@@ -275,6 +279,7 @@ Required properties:
   - compatible: value must be one of:
     * allwinner,sun8i-a83t-de2-mixer-0
     * allwinner,sun8i-a83t-de2-mixer-1
+    * allwinner,sun8i-h3-de2-mixer-0
     * allwinner,sun8i-v3s-de2-mixer
   - reg: base address and size of the memory-mapped region.
   - clocks: phandles to the clocks feeding the mixer
@@ -305,6 +310,7 @@ Required properties:
     * allwinner,sun7i-a20-display-engine
     * allwinner,sun8i-a33-display-engine
     * allwinner,sun8i-a83t-display-engine
+    * allwinner,sun8i-h3-display-engine
     * allwinner,sun8i-v3s-display-engine
 
   - allwinner,pipelines: list of phandle to the display engine
-- 
2.16.2

[PATCH v2 05/16] dt-bindings: display: sun4i-drm: Add compatibles for H3 HDMI pipeline

[Jernej Skrabec]

Add missing compatibles for H3 HDMI pipeline. These compatibles can also
be used with H5 SoC.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index b995bfee734a..8bdef4920edc 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -102,6 +102,7 @@ DWC HDMI PHY
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun8i-a83t-hdmi-phy
+    * allwinner,sun8i-h3-hdmi-phy
   - reg: base address and size of memory-mapped region
   - clocks: phandles to the clocks feeding the HDMI PHY
     * bus: the HDMI PHY interface clock
@@ -110,6 +111,9 @@ Required properties:
   - resets: phandle to the reset controller driving the PHY
   - reset-names: must be "phy"
 
+H3 HDMI PHY requires additional clock:
+  - pll-0: parent of phy clock
+
 TV Encoder
 ----------
 
@@ -275,6 +279,7 @@ Required properties:
   - compatible: value must be one of:
     * allwinner,sun8i-a83t-de2-mixer-0
     * allwinner,sun8i-a83t-de2-mixer-1
+    * allwinner,sun8i-h3-de2-mixer-0
     * allwinner,sun8i-v3s-de2-mixer
   - reg: base address and size of the memory-mapped region.
   - clocks: phandles to the clocks feeding the mixer
@@ -305,6 +310,7 @@ Required properties:
     * allwinner,sun7i-a20-display-engine
     * allwinner,sun8i-a33-display-engine
     * allwinner,sun8i-a83t-display-engine
+    * allwinner,sun8i-h3-display-engine
     * allwinner,sun8i-v3s-display-engine
 
   - allwinner,pipelines: list of phandle to the display engine
-- 
2.16.2

[PATCH v2 05/16] dt-bindings: display: sun4i-drm: Add compatibles for H3 HDMI pipeline

[Jernej Skrabec]

Add missing compatibles for H3 HDMI pipeline. These compatibles can also
be used with H5 SoC.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index b995bfee734a..8bdef4920edc 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -102,6 +102,7 @@ DWC HDMI PHY
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun8i-a83t-hdmi-phy
+    * allwinner,sun8i-h3-hdmi-phy
   - reg: base address and size of memory-mapped region
   - clocks: phandles to the clocks feeding the HDMI PHY
     * bus: the HDMI PHY interface clock
@@ -110,6 +111,9 @@ Required properties:
   - resets: phandle to the reset controller driving the PHY
   - reset-names: must be "phy"
 
+H3 HDMI PHY requires additional clock:
+  - pll-0: parent of phy clock
+
 TV Encoder
 ----------
 
@@ -275,6 +279,7 @@ Required properties:
   - compatible: value must be one of:
     * allwinner,sun8i-a83t-de2-mixer-0
     * allwinner,sun8i-a83t-de2-mixer-1
+    * allwinner,sun8i-h3-de2-mixer-0
     * allwinner,sun8i-v3s-de2-mixer
   - reg: base address and size of the memory-mapped region.
   - clocks: phandles to the clocks feeding the mixer
@@ -305,6 +310,7 @@ Required properties:
     * allwinner,sun7i-a20-display-engine
     * allwinner,sun8i-a33-display-engine
     * allwinner,sun8i-a83t-display-engine
+    * allwinner,sun8i-h3-display-engine
     * allwinner,sun8i-v3s-display-engine
 
   - allwinner,pipelines: list of phandle to the display engine
-- 
2.16.2

[PATCH v2 06/16] drm/sun4i: Don't process LVDS if TCON doesn't support it

[Jernej Skrabec]

TCON checks for LVDS properties even if it doesn't support it. Add a
check to skip that part of the code if TCON doesn't support channel 0.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 120 +++++++++++++++++++------------------
 1 file changed, 63 insertions(+), 57 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 0d6c5ed44795..3fae4f6e695a 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -850,7 +850,7 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
 	struct sunxi_engine *engine;
 	struct device_node *remote;
 	struct sun4i_tcon *tcon;
-	bool has_lvds_rst, has_lvds_alt, can_lvds;
+	bool has_lvds_rst, has_lvds_alt, can_lvds = false;
 	int ret;
 
 	engine = sun4i_tcon_find_engine(drv, dev->of_node);
@@ -881,52 +881,56 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
-	/*
-	 * This can only be made optional since we've had DT nodes
-	 * without the LVDS reset properties.
-	 *
-	 * If the property is missing, just disable LVDS, and print a
-	 * warning.
-	 */
-	tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds");
-	if (IS_ERR(tcon->lvds_rst)) {
-		dev_err(dev, "Couldn't get our reset line\n");
-		return PTR_ERR(tcon->lvds_rst);
-	} else if (tcon->lvds_rst) {
-		has_lvds_rst = true;
-		reset_control_reset(tcon->lvds_rst);
-	} else {
-		has_lvds_rst = false;
-	}
+	if (tcon->quirks->has_channel_0) {
+		/*
+		 * This can only be made optional since we've had DT nodes
+		 * without the LVDS reset properties.
+		 *
+		 * If the property is missing, just disable LVDS, and print a
+		 * warning.
+		 */
+		tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds");
+		if (IS_ERR(tcon->lvds_rst)) {
+			dev_err(dev, "Couldn't get our reset line\n");
+			return PTR_ERR(tcon->lvds_rst);
+		} else if (tcon->lvds_rst) {
+			has_lvds_rst = true;
+			reset_control_reset(tcon->lvds_rst);
+		} else {
+			has_lvds_rst = false;
+		}
 
-	/*
-	 * This can only be made optional since we've had DT nodes
-	 * without the LVDS reset properties.
-	 *
-	 * If the property is missing, just disable LVDS, and print a
-	 * warning.
-	 */
-	if (tcon->quirks->has_lvds_alt) {
-		tcon->lvds_pll = devm_clk_get(dev, "lvds-alt");
-		if (IS_ERR(tcon->lvds_pll)) {
-			if (PTR_ERR(tcon->lvds_pll) == -ENOENT) {
-				has_lvds_alt = false;
+		/*
+		 * This can only be made optional since we've had DT nodes
+		 * without the LVDS reset properties.
+		 *
+		 * If the property is missing, just disable LVDS, and print a
+		 * warning.
+		 */
+		if (tcon->quirks->has_lvds_alt) {
+			tcon->lvds_pll = devm_clk_get(dev, "lvds-alt");
+			if (IS_ERR(tcon->lvds_pll)) {
+				if (PTR_ERR(tcon->lvds_pll) == -ENOENT) {
+					has_lvds_alt = false;
+				} else {
+					dev_err(dev,
+						"Couldn't get the LVDS PLL\n");
+					return PTR_ERR(tcon->lvds_pll);
+				}
 			} else {
-				dev_err(dev, "Couldn't get the LVDS PLL\n");
-				return PTR_ERR(tcon->lvds_pll);
+				has_lvds_alt = true;
 			}
-		} else {
-			has_lvds_alt = true;
 		}
-	}
 
-	if (!has_lvds_rst || (tcon->quirks->has_lvds_alt && !has_lvds_alt)) {
-		dev_warn(dev,
-			 "Missing LVDS properties, Please upgrade your DT\n");
-		dev_warn(dev, "LVDS output disabled\n");
-		can_lvds = false;
-	} else {
-		can_lvds = true;
+		if (!has_lvds_rst ||
+		    (tcon->quirks->has_lvds_alt && !has_lvds_alt)) {
+			dev_warn(dev,
+				 "Missing LVDS properties, Please upgrade your DT\n");
+			dev_warn(dev, "LVDS output disabled\n");
+			can_lvds = false;
+		} else {
+			can_lvds = true;
+		}
 	}
 
 	ret = sun4i_tcon_init_clocks(dev, tcon);
@@ -962,23 +966,25 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
 		goto err_free_dotclock;
 	}
 
-	/*
-	 * If we have an LVDS panel connected to the TCON, we should
-	 * just probe the LVDS connector. Otherwise, just probe RGB as
-	 * we used to.
-	 */
-	remote = of_graph_get_remote_node(dev->of_node, 1, 0);
-	if (of_device_is_compatible(remote, "panel-lvds"))
-		if (can_lvds)
-			ret = sun4i_lvds_init(drm, tcon);
+	if (tcon->quirks->has_channel_0) {
+		/*
+		 * If we have an LVDS panel connected to the TCON, we should
+		 * just probe the LVDS connector. Otherwise, just probe RGB as
+		 * we used to.
+		 */
+		remote = of_graph_get_remote_node(dev->of_node, 1, 0);
+		if (of_device_is_compatible(remote, "panel-lvds"))
+			if (can_lvds)
+				ret = sun4i_lvds_init(drm, tcon);
+			else
+				ret = -EINVAL;
 		else
-			ret = -EINVAL;
-	else
-		ret = sun4i_rgb_init(drm, tcon);
-	of_node_put(remote);
+			ret = sun4i_rgb_init(drm, tcon);
+		of_node_put(remote);
 
-	if (ret < 0)
-		goto err_free_dotclock;
+		if (ret < 0)
+			goto err_free_dotclock;
+	}
 
 	if (tcon->quirks->needs_de_be_mux) {
 		/*
-- 
2.16.2

[PATCH v2 06/16] drm/sun4i: Don't process LVDS if TCON doesn't support it

[Jernej Skrabec]

TCON checks for LVDS properties even if it doesn't support it. Add a
check to skip that part of the code if TCON doesn't support channel 0.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 120 +++++++++++++++++++------------------
 1 file changed, 63 insertions(+), 57 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 0d6c5ed44795..3fae4f6e695a 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -850,7 +850,7 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
 	struct sunxi_engine *engine;
 	struct device_node *remote;
 	struct sun4i_tcon *tcon;
-	bool has_lvds_rst, has_lvds_alt, can_lvds;
+	bool has_lvds_rst, has_lvds_alt, can_lvds = false;
 	int ret;
 
 	engine = sun4i_tcon_find_engine(drv, dev->of_node);
@@ -881,52 +881,56 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
-	/*
-	 * This can only be made optional since we've had DT nodes
-	 * without the LVDS reset properties.
-	 *
-	 * If the property is missing, just disable LVDS, and print a
-	 * warning.
-	 */
-	tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds");
-	if (IS_ERR(tcon->lvds_rst)) {
-		dev_err(dev, "Couldn't get our reset line\n");
-		return PTR_ERR(tcon->lvds_rst);
-	} else if (tcon->lvds_rst) {
-		has_lvds_rst = true;
-		reset_control_reset(tcon->lvds_rst);
-	} else {
-		has_lvds_rst = false;
-	}
+	if (tcon->quirks->has_channel_0) {
+		/*
+		 * This can only be made optional since we've had DT nodes
+		 * without the LVDS reset properties.
+		 *
+		 * If the property is missing, just disable LVDS, and print a
+		 * warning.
+		 */
+		tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds");
+		if (IS_ERR(tcon->lvds_rst)) {
+			dev_err(dev, "Couldn't get our reset line\n");
+			return PTR_ERR(tcon->lvds_rst);
+		} else if (tcon->lvds_rst) {
+			has_lvds_rst = true;
+			reset_control_reset(tcon->lvds_rst);
+		} else {
+			has_lvds_rst = false;
+		}
 
-	/*
-	 * This can only be made optional since we've had DT nodes
-	 * without the LVDS reset properties.
-	 *
-	 * If the property is missing, just disable LVDS, and print a
-	 * warning.
-	 */
-	if (tcon->quirks->has_lvds_alt) {
-		tcon->lvds_pll = devm_clk_get(dev, "lvds-alt");
-		if (IS_ERR(tcon->lvds_pll)) {
-			if (PTR_ERR(tcon->lvds_pll) == -ENOENT) {
-				has_lvds_alt = false;
+		/*
+		 * This can only be made optional since we've had DT nodes
+		 * without the LVDS reset properties.
+		 *
+		 * If the property is missing, just disable LVDS, and print a
+		 * warning.
+		 */
+		if (tcon->quirks->has_lvds_alt) {
+			tcon->lvds_pll = devm_clk_get(dev, "lvds-alt");
+			if (IS_ERR(tcon->lvds_pll)) {
+				if (PTR_ERR(tcon->lvds_pll) == -ENOENT) {
+					has_lvds_alt = false;
+				} else {
+					dev_err(dev,
+						"Couldn't get the LVDS PLL\n");
+					return PTR_ERR(tcon->lvds_pll);
+				}
 			} else {
-				dev_err(dev, "Couldn't get the LVDS PLL\n");
-				return PTR_ERR(tcon->lvds_pll);
+				has_lvds_alt = true;
 			}
-		} else {
-			has_lvds_alt = true;
 		}
-	}
 
-	if (!has_lvds_rst || (tcon->quirks->has_lvds_alt && !has_lvds_alt)) {
-		dev_warn(dev,
-			 "Missing LVDS properties, Please upgrade your DT\n");
-		dev_warn(dev, "LVDS output disabled\n");
-		can_lvds = false;
-	} else {
-		can_lvds = true;
+		if (!has_lvds_rst ||
+		    (tcon->quirks->has_lvds_alt && !has_lvds_alt)) {
+			dev_warn(dev,
+				 "Missing LVDS properties, Please upgrade your DT\n");
+			dev_warn(dev, "LVDS output disabled\n");
+			can_lvds = false;
+		} else {
+			can_lvds = true;
+		}
 	}
 
 	ret = sun4i_tcon_init_clocks(dev, tcon);
@@ -962,23 +966,25 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
 		goto err_free_dotclock;
 	}
 
-	/*
-	 * If we have an LVDS panel connected to the TCON, we should
-	 * just probe the LVDS connector. Otherwise, just probe RGB as
-	 * we used to.
-	 */
-	remote = of_graph_get_remote_node(dev->of_node, 1, 0);
-	if (of_device_is_compatible(remote, "panel-lvds"))
-		if (can_lvds)
-			ret = sun4i_lvds_init(drm, tcon);
+	if (tcon->quirks->has_channel_0) {
+		/*
+		 * If we have an LVDS panel connected to the TCON, we should
+		 * just probe the LVDS connector. Otherwise, just probe RGB as
+		 * we used to.
+		 */
+		remote = of_graph_get_remote_node(dev->of_node, 1, 0);
+		if (of_device_is_compatible(remote, "panel-lvds"))
+			if (can_lvds)
+				ret = sun4i_lvds_init(drm, tcon);
+			else
+				ret = -EINVAL;
 		else
-			ret = -EINVAL;
-	else
-		ret = sun4i_rgb_init(drm, tcon);
-	of_node_put(remote);
+			ret = sun4i_rgb_init(drm, tcon);
+		of_node_put(remote);
 
-	if (ret < 0)
-		goto err_free_dotclock;
+		if (ret < 0)
+			goto err_free_dotclock;
+	}
 
 	if (tcon->quirks->needs_de_be_mux) {
 		/*
-- 
2.16.2

[PATCH v2 06/16] drm/sun4i: Don't process LVDS if TCON doesn't support it

[Jernej Skrabec]

TCON checks for LVDS properties even if it doesn't support it. Add a
check to skip that part of the code if TCON doesn't support channel 0.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 120 +++++++++++++++++++------------------
 1 file changed, 63 insertions(+), 57 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 0d6c5ed44795..3fae4f6e695a 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -850,7 +850,7 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
 	struct sunxi_engine *engine;
 	struct device_node *remote;
 	struct sun4i_tcon *tcon;
-	bool has_lvds_rst, has_lvds_alt, can_lvds;
+	bool has_lvds_rst, has_lvds_alt, can_lvds = false;
 	int ret;
 
 	engine = sun4i_tcon_find_engine(drv, dev->of_node);
@@ -881,52 +881,56 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
-	/*
-	 * This can only be made optional since we've had DT nodes
-	 * without the LVDS reset properties.
-	 *
-	 * If the property is missing, just disable LVDS, and print a
-	 * warning.
-	 */
-	tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds");
-	if (IS_ERR(tcon->lvds_rst)) {
-		dev_err(dev, "Couldn't get our reset line\n");
-		return PTR_ERR(tcon->lvds_rst);
-	} else if (tcon->lvds_rst) {
-		has_lvds_rst = true;
-		reset_control_reset(tcon->lvds_rst);
-	} else {
-		has_lvds_rst = false;
-	}
+	if (tcon->quirks->has_channel_0) {
+		/*
+		 * This can only be made optional since we've had DT nodes
+		 * without the LVDS reset properties.
+		 *
+		 * If the property is missing, just disable LVDS, and print a
+		 * warning.
+		 */
+		tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds");
+		if (IS_ERR(tcon->lvds_rst)) {
+			dev_err(dev, "Couldn't get our reset line\n");
+			return PTR_ERR(tcon->lvds_rst);
+		} else if (tcon->lvds_rst) {
+			has_lvds_rst = true;
+			reset_control_reset(tcon->lvds_rst);
+		} else {
+			has_lvds_rst = false;
+		}
 
-	/*
-	 * This can only be made optional since we've had DT nodes
-	 * without the LVDS reset properties.
-	 *
-	 * If the property is missing, just disable LVDS, and print a
-	 * warning.
-	 */
-	if (tcon->quirks->has_lvds_alt) {
-		tcon->lvds_pll = devm_clk_get(dev, "lvds-alt");
-		if (IS_ERR(tcon->lvds_pll)) {
-			if (PTR_ERR(tcon->lvds_pll) == -ENOENT) {
-				has_lvds_alt = false;
+		/*
+		 * This can only be made optional since we've had DT nodes
+		 * without the LVDS reset properties.
+		 *
+		 * If the property is missing, just disable LVDS, and print a
+		 * warning.
+		 */
+		if (tcon->quirks->has_lvds_alt) {
+			tcon->lvds_pll = devm_clk_get(dev, "lvds-alt");
+			if (IS_ERR(tcon->lvds_pll)) {
+				if (PTR_ERR(tcon->lvds_pll) == -ENOENT) {
+					has_lvds_alt = false;
+				} else {
+					dev_err(dev,
+						"Couldn't get the LVDS PLL\n");
+					return PTR_ERR(tcon->lvds_pll);
+				}
 			} else {
-				dev_err(dev, "Couldn't get the LVDS PLL\n");
-				return PTR_ERR(tcon->lvds_pll);
+				has_lvds_alt = true;
 			}
-		} else {
-			has_lvds_alt = true;
 		}
-	}
 
-	if (!has_lvds_rst || (tcon->quirks->has_lvds_alt && !has_lvds_alt)) {
-		dev_warn(dev,
-			 "Missing LVDS properties, Please upgrade your DT\n");
-		dev_warn(dev, "LVDS output disabled\n");
-		can_lvds = false;
-	} else {
-		can_lvds = true;
+		if (!has_lvds_rst ||
+		    (tcon->quirks->has_lvds_alt && !has_lvds_alt)) {
+			dev_warn(dev,
+				 "Missing LVDS properties, Please upgrade your DT\n");
+			dev_warn(dev, "LVDS output disabled\n");
+			can_lvds = false;
+		} else {
+			can_lvds = true;
+		}
 	}
 
 	ret = sun4i_tcon_init_clocks(dev, tcon);
@@ -962,23 +966,25 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
 		goto err_free_dotclock;
 	}
 
-	/*
-	 * If we have an LVDS panel connected to the TCON, we should
-	 * just probe the LVDS connector. Otherwise, just probe RGB as
-	 * we used to.
-	 */
-	remote = of_graph_get_remote_node(dev->of_node, 1, 0);
-	if (of_device_is_compatible(remote, "panel-lvds"))
-		if (can_lvds)
-			ret = sun4i_lvds_init(drm, tcon);
+	if (tcon->quirks->has_channel_0) {
+		/*
+		 * If we have an LVDS panel connected to the TCON, we should
+		 * just probe the LVDS connector. Otherwise, just probe RGB as
+		 * we used to.
+		 */
+		remote = of_graph_get_remote_node(dev->of_node, 1, 0);
+		if (of_device_is_compatible(remote, "panel-lvds"))
+			if (can_lvds)
+				ret = sun4i_lvds_init(drm, tcon);
+			else
+				ret = -EINVAL;
 		else
-			ret = -EINVAL;
-	else
-		ret = sun4i_rgb_init(drm, tcon);
-	of_node_put(remote);
+			ret = sun4i_rgb_init(drm, tcon);
+		of_node_put(remote);
 
-	if (ret < 0)
-		goto err_free_dotclock;
+		if (ret < 0)
+			goto err_free_dotclock;
+	}
 
 	if (tcon->quirks->needs_de_be_mux) {
 		/*
-- 
2.16.2

[PATCH v2 07/16] drm/sun4i: Add support for H3 display engine

[Jernej Skrabec]

H3 display engine has two mixers which are connected to HDMI and TV
output.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun4i_drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c
index 3957c2ff6870..a0f43b81c64c 100644
--- a/drivers/gpu/drm/sun4i/sun4i_drv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
@@ -359,6 +359,7 @@ static const struct of_device_id sun4i_drv_of_table[] = {
 	{ .compatible = "allwinner,sun7i-a20-display-engine" },
 	{ .compatible = "allwinner,sun8i-a33-display-engine" },
 	{ .compatible = "allwinner,sun8i-a83t-display-engine" },
+	{ .compatible = "allwinner,sun8i-h3-display-engine" },
 	{ .compatible = "allwinner,sun8i-v3s-display-engine" },
 	{ }
 };
-- 
2.16.2

[PATCH v2 07/16] drm/sun4i: Add support for H3 display engine

[Jernej Skrabec]

H3 display engine has two mixers which are connected to HDMI and TV
output.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 drivers/gpu/drm/sun4i/sun4i_drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c
index 3957c2ff6870..a0f43b81c64c 100644
--- a/drivers/gpu/drm/sun4i/sun4i_drv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
@@ -359,6 +359,7 @@ static const struct of_device_id sun4i_drv_of_table[] = {
 	{ .compatible = "allwinner,sun7i-a20-display-engine" },
 	{ .compatible = "allwinner,sun8i-a33-display-engine" },
 	{ .compatible = "allwinner,sun8i-a83t-display-engine" },
+	{ .compatible = "allwinner,sun8i-h3-display-engine" },
 	{ .compatible = "allwinner,sun8i-v3s-display-engine" },
 	{ }
 };
-- 
2.16.2

[PATCH v2 07/16] drm/sun4i: Add support for H3 display engine

[Jernej Skrabec]

H3 display engine has two mixers which are connected to HDMI and TV
output.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun4i_drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c
index 3957c2ff6870..a0f43b81c64c 100644
--- a/drivers/gpu/drm/sun4i/sun4i_drv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
@@ -359,6 +359,7 @@ static const struct of_device_id sun4i_drv_of_table[] = {
 	{ .compatible = "allwinner,sun7i-a20-display-engine" },
 	{ .compatible = "allwinner,sun8i-a33-display-engine" },
 	{ .compatible = "allwinner,sun8i-a83t-display-engine" },
+	{ .compatible = "allwinner,sun8i-h3-display-engine" },
 	{ .compatible = "allwinner,sun8i-v3s-display-engine" },
 	{ }
 };
-- 
2.16.2

[PATCH v2 08/16] drm/sun4i: Add support for H3 mixer 0

[Jernej Skrabec]

This mixer supports 1 VI plane, 3 UI plane and HW scaling on all planes.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun8i_mixer.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c
index 9b0256d31a61..126899d6f0d3 100644
--- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
@@ -492,6 +492,14 @@ static const struct sun8i_mixer_cfg sun8i_a83t_mixer1_cfg = {
 	.vi_num		= 1,
 };
 
+static const struct sun8i_mixer_cfg sun8i_h3_mixer0_cfg = {
+	.ccsc		= 0,
+	.mod_rate	= 432000000,
+	.scaler_mask	= 0xf,
+	.ui_num		= 3,
+	.vi_num		= 1,
+};
+
 static const struct sun8i_mixer_cfg sun8i_v3s_mixer_cfg = {
 	.vi_num = 2,
 	.ui_num = 1,
@@ -509,6 +517,10 @@ static const struct of_device_id sun8i_mixer_of_table[] = {
 		.compatible = "allwinner,sun8i-a83t-de2-mixer-1",
 		.data = &sun8i_a83t_mixer1_cfg,
 	},
+	{
+		.compatible = "allwinner,sun8i-h3-de2-mixer-0",
+		.data = &sun8i_h3_mixer0_cfg,
+	},
 	{
 		.compatible = "allwinner,sun8i-v3s-de2-mixer",
 		.data = &sun8i_v3s_mixer_cfg,
-- 
2.16.2

[PATCH v2 08/16] drm/sun4i: Add support for H3 mixer 0

[Jernej Skrabec]

This mixer supports 1 VI plane, 3 UI plane and HW scaling on all planes.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 drivers/gpu/drm/sun4i/sun8i_mixer.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c
index 9b0256d31a61..126899d6f0d3 100644
--- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
@@ -492,6 +492,14 @@ static const struct sun8i_mixer_cfg sun8i_a83t_mixer1_cfg = {
 	.vi_num		= 1,
 };
 
+static const struct sun8i_mixer_cfg sun8i_h3_mixer0_cfg = {
+	.ccsc		= 0,
+	.mod_rate	= 432000000,
+	.scaler_mask	= 0xf,
+	.ui_num		= 3,
+	.vi_num		= 1,
+};
+
 static const struct sun8i_mixer_cfg sun8i_v3s_mixer_cfg = {
 	.vi_num = 2,
 	.ui_num = 1,
@@ -509,6 +517,10 @@ static const struct of_device_id sun8i_mixer_of_table[] = {
 		.compatible = "allwinner,sun8i-a83t-de2-mixer-1",
 		.data = &sun8i_a83t_mixer1_cfg,
 	},
+	{
+		.compatible = "allwinner,sun8i-h3-de2-mixer-0",
+		.data = &sun8i_h3_mixer0_cfg,
+	},
 	{
 		.compatible = "allwinner,sun8i-v3s-de2-mixer",
 		.data = &sun8i_v3s_mixer_cfg,
-- 
2.16.2

[PATCH v2 08/16] drm/sun4i: Add support for H3 mixer 0

[Jernej Skrabec]

This mixer supports 1 VI plane, 3 UI plane and HW scaling on all planes.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun8i_mixer.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c
index 9b0256d31a61..126899d6f0d3 100644
--- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
@@ -492,6 +492,14 @@ static const struct sun8i_mixer_cfg sun8i_a83t_mixer1_cfg = {
 	.vi_num		= 1,
 };
 
+static const struct sun8i_mixer_cfg sun8i_h3_mixer0_cfg = {
+	.ccsc		= 0,
+	.mod_rate	= 432000000,
+	.scaler_mask	= 0xf,
+	.ui_num		= 3,
+	.vi_num		= 1,
+};
+
 static const struct sun8i_mixer_cfg sun8i_v3s_mixer_cfg = {
 	.vi_num = 2,
 	.ui_num = 1,
@@ -509,6 +517,10 @@ static const struct of_device_id sun8i_mixer_of_table[] = {
 		.compatible = "allwinner,sun8i-a83t-de2-mixer-1",
 		.data = &sun8i_a83t_mixer1_cfg,
 	},
+	{
+		.compatible = "allwinner,sun8i-h3-de2-mixer-0",
+		.data = &sun8i_h3_mixer0_cfg,
+	},
 	{
 		.compatible = "allwinner,sun8i-v3s-de2-mixer",
 		.data = &sun8i_v3s_mixer_cfg,
-- 
2.16.2

[PATCH v2 09/16] drm/sun4i: Fix polarity configuration for DW HDMI PHY

[Jernej Skrabec]

Current polarity configuration code is cleary wrong since it compares
same flag two times. However, even if flag name is fixed, it won't work
well for resolutions which have one polarity positive and another
negative.

Fix that by properly set each bit according to each polarity. Since
those two bits are not described in any documentation, relationships
were obtained by experimentation.

Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver")

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index e5bfcdd43ec9..9d2f11ca3538 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -10,7 +10,8 @@
 #define SUN8I_HDMI_PHY_DBG_CTRL_REG	0x0000
 #define SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK		BIT(0)
 #define SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK	GENMASK(15, 8)
-#define SUN8I_HDMI_PHY_DBG_CTRL_POL(val)	(val << 8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC	BIT(8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC	BIT(9)
 #define SUN8I_HDMI_PHY_DBG_CTRL_ADDR_MASK	GENMASK(23, 16)
 #define SUN8I_HDMI_PHY_DBG_CTRL_ADDR(addr)	(addr << 16)
 
@@ -35,14 +36,14 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
 	u32 val = 0;
 
-	if ((mode->flags & DRM_MODE_FLAG_NHSYNC) &&
-	    (mode->flags & DRM_MODE_FLAG_NHSYNC)) {
-		val = 0x03;
-	}
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC;
+
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC;
 
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
-			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK,
-			   SUN8I_HDMI_PHY_DBG_CTRL_POL(val));
+			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
 
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN,
-- 
2.16.2

[PATCH v2 09/16] drm/sun4i: Fix polarity configuration for DW HDMI PHY

[Jernej Skrabec]

Current polarity configuration code is cleary wrong since it compares
same flag two times. However, even if flag name is fixed, it won't work
well for resolutions which have one polarity positive and another
negative.

Fix that by properly set each bit according to each polarity. Since
those two bits are not described in any documentation, relationships
were obtained by experimentation.

Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver")

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index e5bfcdd43ec9..9d2f11ca3538 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -10,7 +10,8 @@
 #define SUN8I_HDMI_PHY_DBG_CTRL_REG	0x0000
 #define SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK		BIT(0)
 #define SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK	GENMASK(15, 8)
-#define SUN8I_HDMI_PHY_DBG_CTRL_POL(val)	(val << 8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC	BIT(8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC	BIT(9)
 #define SUN8I_HDMI_PHY_DBG_CTRL_ADDR_MASK	GENMASK(23, 16)
 #define SUN8I_HDMI_PHY_DBG_CTRL_ADDR(addr)	(addr << 16)
 
@@ -35,14 +36,14 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
 	u32 val = 0;
 
-	if ((mode->flags & DRM_MODE_FLAG_NHSYNC) &&
-	    (mode->flags & DRM_MODE_FLAG_NHSYNC)) {
-		val = 0x03;
-	}
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC;
+
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC;
 
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
-			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK,
-			   SUN8I_HDMI_PHY_DBG_CTRL_POL(val));
+			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
 
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN,
-- 
2.16.2

[PATCH v2 09/16] drm/sun4i: Fix polarity configuration for DW HDMI PHY

[Jernej Skrabec]

Current polarity configuration code is cleary wrong since it compares
same flag two times. However, even if flag name is fixed, it won't work
well for resolutions which have one polarity positive and another
negative.

Fix that by properly set each bit according to each polarity. Since
those two bits are not described in any documentation, relationships
were obtained by experimentation.

Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver")

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index e5bfcdd43ec9..9d2f11ca3538 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -10,7 +10,8 @@
 #define SUN8I_HDMI_PHY_DBG_CTRL_REG	0x0000
 #define SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK		BIT(0)
 #define SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK	GENMASK(15, 8)
-#define SUN8I_HDMI_PHY_DBG_CTRL_POL(val)	(val << 8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC	BIT(8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC	BIT(9)
 #define SUN8I_HDMI_PHY_DBG_CTRL_ADDR_MASK	GENMASK(23, 16)
 #define SUN8I_HDMI_PHY_DBG_CTRL_ADDR(addr)	(addr << 16)
 
@@ -35,14 +36,14 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
 	u32 val = 0;
 
-	if ((mode->flags & DRM_MODE_FLAG_NHSYNC) &&
-	    (mode->flags & DRM_MODE_FLAG_NHSYNC)) {
-		val = 0x03;
-	}
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC;
+
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC;
 
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
-			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK,
-			   SUN8I_HDMI_PHY_DBG_CTRL_POL(val));
+			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
 
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN,
-- 
2.16.2

[PATCH v2 10/16] drm/sun4i: Add support for variants to DW HDMI PHY

[Jernej Skrabec]

There are multiple variants of DW HDMI PHYs in Allwinner SoCs. While
some things like clock and reset setup are the same, PHY configuration
differs a lot.

Split out code which is PHY specific to separate functions and create
a structure which holds pointers to those functions.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h  | 20 ++++++--
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 89 +++++++++++++++++++++++-----------
 2 files changed, 76 insertions(+), 33 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index d8d0684fc8aa..1e9eb6072615 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -12,11 +12,23 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+struct sun8i_hdmi_phy;
+
+struct sun8i_hdmi_phy_variant {
+	void (*phy_init)(struct sun8i_hdmi_phy *phy);
+	void (*phy_disable)(struct dw_hdmi *hdmi,
+			    struct sun8i_hdmi_phy *phy);
+	int  (*phy_config)(struct dw_hdmi *hdmi,
+			   struct sun8i_hdmi_phy *phy,
+			   unsigned int clk_rate);
+};
+
 struct sun8i_hdmi_phy {
-	struct clk		*clk_bus;
-	struct clk		*clk_mod;
-	struct regmap		*regs;
-	struct reset_control	*rst_phy;
+	struct clk			*clk_bus;
+	struct clk			*clk_mod;
+	struct regmap			*regs;
+	struct reset_control		*rst_phy;
+	struct sun8i_hdmi_phy_variant	*variant;
 };
 
 struct sun8i_dw_hdmi {
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 9d2f11ca3538..17aada64bafd 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -30,21 +30,10 @@
  */
 #define I2C_ADDR	0x69
 
-static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
-				 struct drm_display_mode *mode)
+static int sun8i_hdmi_phy_config_a83t(struct dw_hdmi *hdmi,
+				      struct sun8i_hdmi_phy *phy,
+				      unsigned int clk_rate)
 {
-	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
-	u32 val = 0;
-
-	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
-		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC;
-
-	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
-		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC;
-
-	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
-			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
-
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN,
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN);
@@ -64,21 +53,21 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 	 * release any documentation, explanation of this values can
 	 * be found in i.MX 6Dual/6Quad Reference Manual.
 	 */
-	if (mode->crtc_clock <= 27000) {
+	if (clk_rate <= 27000000) {
 		dw_hdmi_phy_i2c_write(hdmi, 0x01e0, 0x06);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x15);
 		dw_hdmi_phy_i2c_write(hdmi, 0x08da, 0x10);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0007, 0x19);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0318, 0x0e);
 		dw_hdmi_phy_i2c_write(hdmi, 0x8009, 0x09);
-	} else if (mode->crtc_clock <= 74250) {
+	} else if (clk_rate <= 74250000) {
 		dw_hdmi_phy_i2c_write(hdmi, 0x0540, 0x06);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0005, 0x15);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x10);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0007, 0x19);
 		dw_hdmi_phy_i2c_write(hdmi, 0x02b5, 0x0e);
 		dw_hdmi_phy_i2c_write(hdmi, 0x8009, 0x09);
-	} else if (mode->crtc_clock <= 148500) {
+	} else if (clk_rate <= 148500000) {
 		dw_hdmi_phy_i2c_write(hdmi, 0x04a0, 0x06);
 		dw_hdmi_phy_i2c_write(hdmi, 0x000a, 0x15);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x10);
@@ -103,10 +92,27 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 	return 0;
 };
 
-static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
+static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
+				 struct drm_display_mode *mode)
 {
 	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
+	u32 val = 0;
+
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC;
 
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC;
+
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
+			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
+
+	return phy->variant->phy_config(hdmi, phy, mode->crtc_clock * 1000);
+};
+
+static void sun8i_hdmi_phy_disable_a83t(struct dw_hdmi *hdmi,
+					struct sun8i_hdmi_phy *phy)
+{
 	dw_hdmi_phy_gen2_txpwron(hdmi, 0);
 	dw_hdmi_phy_gen2_pddq(hdmi, 1);
 
@@ -114,6 +120,13 @@ static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN, 0);
 }
 
+static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
+{
+	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
+
+	phy->variant->phy_disable(hdmi, phy);
+}
+
 static const struct dw_hdmi_phy_ops sun8i_hdmi_phy_ops = {
 	.init = &sun8i_hdmi_phy_config,
 	.disable = &sun8i_hdmi_phy_disable,
@@ -122,16 +135,8 @@ static const struct dw_hdmi_phy_ops sun8i_hdmi_phy_ops = {
 	.setup_hpd = &dw_hdmi_phy_setup_hpd,
 };
 
-void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
+static void sun8i_hdmi_phy_init_a83t(struct sun8i_hdmi_phy *phy)
 {
-	/* enable read access to HDMI controller */
-	regmap_write(phy->regs, SUN8I_HDMI_PHY_READ_EN_REG,
-		     SUN8I_HDMI_PHY_READ_EN_MAGIC);
-
-	/* unscramble register offsets */
-	regmap_write(phy->regs, SUN8I_HDMI_PHY_UNSCRAMBLE_REG,
-		     SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC);
-
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
 			   SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK,
 			   SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK);
@@ -145,6 +150,19 @@ void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
 			   SUN8I_HDMI_PHY_DBG_CTRL_ADDR(I2C_ADDR));
 }
 
+void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
+{
+	/* enable read access to HDMI controller */
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_READ_EN_REG,
+		     SUN8I_HDMI_PHY_READ_EN_MAGIC);
+
+	/* unscramble register offsets */
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_UNSCRAMBLE_REG,
+		     SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC);
+
+	phy->variant->phy_init(phy);
+}
+
 const struct dw_hdmi_phy_ops *sun8i_hdmi_phy_get_ops(void)
 {
 	return &sun8i_hdmi_phy_ops;
@@ -158,20 +176,31 @@ static struct regmap_config sun8i_hdmi_phy_regmap_config = {
 	.name		= "phy"
 };
 
+static const struct sun8i_hdmi_phy_variant sun8i_a83t_hdmi_phy = {
+	.phy_init = &sun8i_hdmi_phy_init_a83t,
+	.phy_disable = &sun8i_hdmi_phy_disable_a83t,
+	.phy_config = &sun8i_hdmi_phy_config_a83t,
+};
+
 static const struct of_device_id sun8i_hdmi_phy_of_table[] = {
-	{ .compatible = "allwinner,sun8i-a83t-hdmi-phy" },
+	{
+		.compatible = "allwinner,sun8i-a83t-hdmi-phy",
+		.data = &sun8i_a83t_hdmi_phy,
+	},
 	{ /* sentinel */ }
 };
 
 int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 {
+	const struct of_device_id *match;
 	struct device *dev = hdmi->dev;
 	struct sun8i_hdmi_phy *phy;
 	struct resource res;
 	void __iomem *regs;
 	int ret;
 
-	if (!of_match_node(sun8i_hdmi_phy_of_table, node)) {
+	match = of_match_node(sun8i_hdmi_phy_of_table, node);
+	if (!match) {
 		dev_err(dev, "Incompatible HDMI PHY\n");
 		return -EINVAL;
 	}
@@ -180,6 +209,8 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 	if (!phy)
 		return -ENOMEM;
 
+	phy->variant = (struct sun8i_hdmi_phy_variant *)match->data;
+
 	ret = of_address_to_resource(node, 0, &res);
 	if (ret) {
 		dev_err(dev, "phy: Couldn't get our resources\n");
-- 
2.16.2

[PATCH v2 10/16] drm/sun4i: Add support for variants to DW HDMI PHY

[Jernej Skrabec]

There are multiple variants of DW HDMI PHYs in Allwinner SoCs. While
some things like clock and reset setup are the same, PHY configuration
differs a lot.

Split out code which is PHY specific to separate functions and create
a structure which holds pointers to those functions.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h  | 20 ++++++--
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 89 +++++++++++++++++++++++-----------
 2 files changed, 76 insertions(+), 33 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index d8d0684fc8aa..1e9eb6072615 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -12,11 +12,23 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+struct sun8i_hdmi_phy;
+
+struct sun8i_hdmi_phy_variant {
+	void (*phy_init)(struct sun8i_hdmi_phy *phy);
+	void (*phy_disable)(struct dw_hdmi *hdmi,
+			    struct sun8i_hdmi_phy *phy);
+	int  (*phy_config)(struct dw_hdmi *hdmi,
+			   struct sun8i_hdmi_phy *phy,
+			   unsigned int clk_rate);
+};
+
 struct sun8i_hdmi_phy {
-	struct clk		*clk_bus;
-	struct clk		*clk_mod;
-	struct regmap		*regs;
-	struct reset_control	*rst_phy;
+	struct clk			*clk_bus;
+	struct clk			*clk_mod;
+	struct regmap			*regs;
+	struct reset_control		*rst_phy;
+	struct sun8i_hdmi_phy_variant	*variant;
 };
 
 struct sun8i_dw_hdmi {
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 9d2f11ca3538..17aada64bafd 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -30,21 +30,10 @@
  */
 #define I2C_ADDR	0x69
 
-static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
-				 struct drm_display_mode *mode)
+static int sun8i_hdmi_phy_config_a83t(struct dw_hdmi *hdmi,
+				      struct sun8i_hdmi_phy *phy,
+				      unsigned int clk_rate)
 {
-	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
-	u32 val = 0;
-
-	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
-		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC;
-
-	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
-		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC;
-
-	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
-			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
-
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN,
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN);
@@ -64,21 +53,21 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 	 * release any documentation, explanation of this values can
 	 * be found in i.MX 6Dual/6Quad Reference Manual.
 	 */
-	if (mode->crtc_clock <= 27000) {
+	if (clk_rate <= 27000000) {
 		dw_hdmi_phy_i2c_write(hdmi, 0x01e0, 0x06);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x15);
 		dw_hdmi_phy_i2c_write(hdmi, 0x08da, 0x10);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0007, 0x19);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0318, 0x0e);
 		dw_hdmi_phy_i2c_write(hdmi, 0x8009, 0x09);
-	} else if (mode->crtc_clock <= 74250) {
+	} else if (clk_rate <= 74250000) {
 		dw_hdmi_phy_i2c_write(hdmi, 0x0540, 0x06);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0005, 0x15);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x10);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0007, 0x19);
 		dw_hdmi_phy_i2c_write(hdmi, 0x02b5, 0x0e);
 		dw_hdmi_phy_i2c_write(hdmi, 0x8009, 0x09);
-	} else if (mode->crtc_clock <= 148500) {
+	} else if (clk_rate <= 148500000) {
 		dw_hdmi_phy_i2c_write(hdmi, 0x04a0, 0x06);
 		dw_hdmi_phy_i2c_write(hdmi, 0x000a, 0x15);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x10);
@@ -103,10 +92,27 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 	return 0;
 };
 
-static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
+static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
+				 struct drm_display_mode *mode)
 {
 	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
+	u32 val = 0;
+
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC;
 
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC;
+
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
+			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
+
+	return phy->variant->phy_config(hdmi, phy, mode->crtc_clock * 1000);
+};
+
+static void sun8i_hdmi_phy_disable_a83t(struct dw_hdmi *hdmi,
+					struct sun8i_hdmi_phy *phy)
+{
 	dw_hdmi_phy_gen2_txpwron(hdmi, 0);
 	dw_hdmi_phy_gen2_pddq(hdmi, 1);
 
@@ -114,6 +120,13 @@ static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN, 0);
 }
 
+static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
+{
+	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
+
+	phy->variant->phy_disable(hdmi, phy);
+}
+
 static const struct dw_hdmi_phy_ops sun8i_hdmi_phy_ops = {
 	.init = &sun8i_hdmi_phy_config,
 	.disable = &sun8i_hdmi_phy_disable,
@@ -122,16 +135,8 @@ static const struct dw_hdmi_phy_ops sun8i_hdmi_phy_ops = {
 	.setup_hpd = &dw_hdmi_phy_setup_hpd,
 };
 
-void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
+static void sun8i_hdmi_phy_init_a83t(struct sun8i_hdmi_phy *phy)
 {
-	/* enable read access to HDMI controller */
-	regmap_write(phy->regs, SUN8I_HDMI_PHY_READ_EN_REG,
-		     SUN8I_HDMI_PHY_READ_EN_MAGIC);
-
-	/* unscramble register offsets */
-	regmap_write(phy->regs, SUN8I_HDMI_PHY_UNSCRAMBLE_REG,
-		     SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC);
-
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
 			   SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK,
 			   SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK);
@@ -145,6 +150,19 @@ void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
 			   SUN8I_HDMI_PHY_DBG_CTRL_ADDR(I2C_ADDR));
 }
 
+void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
+{
+	/* enable read access to HDMI controller */
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_READ_EN_REG,
+		     SUN8I_HDMI_PHY_READ_EN_MAGIC);
+
+	/* unscramble register offsets */
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_UNSCRAMBLE_REG,
+		     SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC);
+
+	phy->variant->phy_init(phy);
+}
+
 const struct dw_hdmi_phy_ops *sun8i_hdmi_phy_get_ops(void)
 {
 	return &sun8i_hdmi_phy_ops;
@@ -158,20 +176,31 @@ static struct regmap_config sun8i_hdmi_phy_regmap_config = {
 	.name		= "phy"
 };
 
+static const struct sun8i_hdmi_phy_variant sun8i_a83t_hdmi_phy = {
+	.phy_init = &sun8i_hdmi_phy_init_a83t,
+	.phy_disable = &sun8i_hdmi_phy_disable_a83t,
+	.phy_config = &sun8i_hdmi_phy_config_a83t,
+};
+
 static const struct of_device_id sun8i_hdmi_phy_of_table[] = {
-	{ .compatible = "allwinner,sun8i-a83t-hdmi-phy" },
+	{
+		.compatible = "allwinner,sun8i-a83t-hdmi-phy",
+		.data = &sun8i_a83t_hdmi_phy,
+	},
 	{ /* sentinel */ }
 };
 
 int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 {
+	const struct of_device_id *match;
 	struct device *dev = hdmi->dev;
 	struct sun8i_hdmi_phy *phy;
 	struct resource res;
 	void __iomem *regs;
 	int ret;
 
-	if (!of_match_node(sun8i_hdmi_phy_of_table, node)) {
+	match = of_match_node(sun8i_hdmi_phy_of_table, node);
+	if (!match) {
 		dev_err(dev, "Incompatible HDMI PHY\n");
 		return -EINVAL;
 	}
@@ -180,6 +209,8 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 	if (!phy)
 		return -ENOMEM;
 
+	phy->variant = (struct sun8i_hdmi_phy_variant *)match->data;
+
 	ret = of_address_to_resource(node, 0, &res);
 	if (ret) {
 		dev_err(dev, "phy: Couldn't get our resources\n");
-- 
2.16.2

[PATCH v2 10/16] drm/sun4i: Add support for variants to DW HDMI PHY

[Jernej Skrabec]

There are multiple variants of DW HDMI PHYs in Allwinner SoCs. While
some things like clock and reset setup are the same, PHY configuration
differs a lot.

Split out code which is PHY specific to separate functions and create
a structure which holds pointers to those functions.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h  | 20 ++++++--
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 89 +++++++++++++++++++++++-----------
 2 files changed, 76 insertions(+), 33 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index d8d0684fc8aa..1e9eb6072615 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -12,11 +12,23 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+struct sun8i_hdmi_phy;
+
+struct sun8i_hdmi_phy_variant {
+	void (*phy_init)(struct sun8i_hdmi_phy *phy);
+	void (*phy_disable)(struct dw_hdmi *hdmi,
+			    struct sun8i_hdmi_phy *phy);
+	int  (*phy_config)(struct dw_hdmi *hdmi,
+			   struct sun8i_hdmi_phy *phy,
+			   unsigned int clk_rate);
+};
+
 struct sun8i_hdmi_phy {
-	struct clk		*clk_bus;
-	struct clk		*clk_mod;
-	struct regmap		*regs;
-	struct reset_control	*rst_phy;
+	struct clk			*clk_bus;
+	struct clk			*clk_mod;
+	struct regmap			*regs;
+	struct reset_control		*rst_phy;
+	struct sun8i_hdmi_phy_variant	*variant;
 };
 
 struct sun8i_dw_hdmi {
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 9d2f11ca3538..17aada64bafd 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -30,21 +30,10 @@
  */
 #define I2C_ADDR	0x69
 
-static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
-				 struct drm_display_mode *mode)
+static int sun8i_hdmi_phy_config_a83t(struct dw_hdmi *hdmi,
+				      struct sun8i_hdmi_phy *phy,
+				      unsigned int clk_rate)
 {
-	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
-	u32 val = 0;
-
-	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
-		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC;
-
-	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
-		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC;
-
-	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
-			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
-
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN,
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN);
@@ -64,21 +53,21 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 	 * release any documentation, explanation of this values can
 	 * be found in i.MX 6Dual/6Quad Reference Manual.
 	 */
-	if (mode->crtc_clock <= 27000) {
+	if (clk_rate <= 27000000) {
 		dw_hdmi_phy_i2c_write(hdmi, 0x01e0, 0x06);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x15);
 		dw_hdmi_phy_i2c_write(hdmi, 0x08da, 0x10);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0007, 0x19);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0318, 0x0e);
 		dw_hdmi_phy_i2c_write(hdmi, 0x8009, 0x09);
-	} else if (mode->crtc_clock <= 74250) {
+	} else if (clk_rate <= 74250000) {
 		dw_hdmi_phy_i2c_write(hdmi, 0x0540, 0x06);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0005, 0x15);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x10);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0007, 0x19);
 		dw_hdmi_phy_i2c_write(hdmi, 0x02b5, 0x0e);
 		dw_hdmi_phy_i2c_write(hdmi, 0x8009, 0x09);
-	} else if (mode->crtc_clock <= 148500) {
+	} else if (clk_rate <= 148500000) {
 		dw_hdmi_phy_i2c_write(hdmi, 0x04a0, 0x06);
 		dw_hdmi_phy_i2c_write(hdmi, 0x000a, 0x15);
 		dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x10);
@@ -103,10 +92,27 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 	return 0;
 };
 
-static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
+static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
+				 struct drm_display_mode *mode)
 {
 	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
+	u32 val = 0;
+
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC;
 
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC;
+
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
+			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
+
+	return phy->variant->phy_config(hdmi, phy, mode->crtc_clock * 1000);
+};
+
+static void sun8i_hdmi_phy_disable_a83t(struct dw_hdmi *hdmi,
+					struct sun8i_hdmi_phy *phy)
+{
 	dw_hdmi_phy_gen2_txpwron(hdmi, 0);
 	dw_hdmi_phy_gen2_pddq(hdmi, 1);
 
@@ -114,6 +120,13 @@ static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN, 0);
 }
 
+static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
+{
+	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
+
+	phy->variant->phy_disable(hdmi, phy);
+}
+
 static const struct dw_hdmi_phy_ops sun8i_hdmi_phy_ops = {
 	.init = &sun8i_hdmi_phy_config,
 	.disable = &sun8i_hdmi_phy_disable,
@@ -122,16 +135,8 @@ static const struct dw_hdmi_phy_ops sun8i_hdmi_phy_ops = {
 	.setup_hpd = &dw_hdmi_phy_setup_hpd,
 };
 
-void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
+static void sun8i_hdmi_phy_init_a83t(struct sun8i_hdmi_phy *phy)
 {
-	/* enable read access to HDMI controller */
-	regmap_write(phy->regs, SUN8I_HDMI_PHY_READ_EN_REG,
-		     SUN8I_HDMI_PHY_READ_EN_MAGIC);
-
-	/* unscramble register offsets */
-	regmap_write(phy->regs, SUN8I_HDMI_PHY_UNSCRAMBLE_REG,
-		     SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC);
-
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
 			   SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK,
 			   SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK);
@@ -145,6 +150,19 @@ void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
 			   SUN8I_HDMI_PHY_DBG_CTRL_ADDR(I2C_ADDR));
 }
 
+void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
+{
+	/* enable read access to HDMI controller */
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_READ_EN_REG,
+		     SUN8I_HDMI_PHY_READ_EN_MAGIC);
+
+	/* unscramble register offsets */
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_UNSCRAMBLE_REG,
+		     SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC);
+
+	phy->variant->phy_init(phy);
+}
+
 const struct dw_hdmi_phy_ops *sun8i_hdmi_phy_get_ops(void)
 {
 	return &sun8i_hdmi_phy_ops;
@@ -158,20 +176,31 @@ static struct regmap_config sun8i_hdmi_phy_regmap_config = {
 	.name		= "phy"
 };
 
+static const struct sun8i_hdmi_phy_variant sun8i_a83t_hdmi_phy = {
+	.phy_init = &sun8i_hdmi_phy_init_a83t,
+	.phy_disable = &sun8i_hdmi_phy_disable_a83t,
+	.phy_config = &sun8i_hdmi_phy_config_a83t,
+};
+
 static const struct of_device_id sun8i_hdmi_phy_of_table[] = {
-	{ .compatible = "allwinner,sun8i-a83t-hdmi-phy" },
+	{
+		.compatible = "allwinner,sun8i-a83t-hdmi-phy",
+		.data = &sun8i_a83t_hdmi_phy,
+	},
 	{ /* sentinel */ }
 };
 
 int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 {
+	const struct of_device_id *match;
 	struct device *dev = hdmi->dev;
 	struct sun8i_hdmi_phy *phy;
 	struct resource res;
 	void __iomem *regs;
 	int ret;
 
-	if (!of_match_node(sun8i_hdmi_phy_of_table, node)) {
+	match = of_match_node(sun8i_hdmi_phy_of_table, node);
+	if (!match) {
 		dev_err(dev, "Incompatible HDMI PHY\n");
 		return -EINVAL;
 	}
@@ -180,6 +209,8 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 	if (!phy)
 		return -ENOMEM;
 
+	phy->variant = (struct sun8i_hdmi_phy_variant *)match->data;
+
 	ret = of_address_to_resource(node, 0, &res);
 	if (ret) {
 		dev_err(dev, "phy: Couldn't get our resources\n");
-- 
2.16.2

[PATCH v2 11/16] drm/sun4i: Move and expand DW HDMI PHY register macros

[Jernej Skrabec]

DW HDMI PHY macros are moved to header file and expanded with the
registers present on newer SoCs like H3 and H5.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h  | 131 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c |  17 -----
 2 files changed, 131 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index 1e9eb6072615..49161326ea5a 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -12,6 +12,137 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#define SUN8I_HDMI_PHY_DBG_CTRL_REG	0x0000
+#define SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK		BIT(0)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK	GENMASK(15, 8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC	BIT(8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC	BIT(9)
+#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR_MASK	GENMASK(23, 16)
+#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR(addr)	(addr << 16)
+
+#define SUN8I_HDMI_PHY_REXT_CTRL_REG	0x0004
+#define SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN	BIT(31)
+
+#define SUN8I_HDMI_PHY_READ_EN_REG	0x0010
+#define SUN8I_HDMI_PHY_READ_EN_MAGIC		0x54524545
+
+#define SUN8I_HDMI_PHY_UNSCRAMBLE_REG	0x0014
+#define SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC		0x42494E47
+
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG	0x0020
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_SWI		BIT(31)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_PWEND	BIT(30)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_PWENC	BIT(29)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_CALSW	BIT(28)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_SVRCAL(x)	((x) << 26)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_SVBH(x)	((x) << 24)
+#define SUN8I_HDMI_PHY_ANA_CFG1_AMP_OPT		BIT(23)
+#define SUN8I_HDMI_PHY_ANA_CFG1_EMP_OPT		BIT(22)
+#define SUN8I_HDMI_PHY_ANA_CFG1_AMPCK_OPT	BIT(21)
+#define SUN8I_HDMI_PHY_ANA_CFG1_EMPCK_OPT	BIT(20)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENRCAL		BIT(19)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENCALOG		BIT(18)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_SCKTMDS	BIT(17)
+#define SUN8I_HDMI_PHY_ANA_CFG1_TMDSCLK_EN	BIT(16)
+#define SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK	GENMASK(15, 12)
+#define SUN8I_HDMI_PHY_ANA_CFG1_TXEN_ALL	(0xf << 12)
+#define SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDSCLK	BIT(11)
+#define SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS2	BIT(10)
+#define SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS1	BIT(9)
+#define SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS0	BIT(8)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDSCLK	BIT(7)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS2	BIT(6)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS1	BIT(5)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS0	BIT(4)
+#define SUN8I_HDMI_PHY_ANA_CFG1_CKEN		BIT(3)
+#define SUN8I_HDMI_PHY_ANA_CFG1_LDOEN		BIT(2)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENVBS		BIT(1)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENBI		BIT(0)
+
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG	0x0024
+#define SUN8I_HDMI_PHY_ANA_CFG2_M_EN		BIT(31)
+#define SUN8I_HDMI_PHY_ANA_CFG2_PLLDBEN		BIT(30)
+#define SUN8I_HDMI_PHY_ANA_CFG2_SEN		BIT(29)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_HPDPD	BIT(28)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_HPDEN	BIT(27)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_PLRCK	BIT(26)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_PLR(x)	((x) << 23)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_DENCK	BIT(22)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_DEN		BIT(21)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_CD(x)	((x) << 19)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_CKSS(x)	((x) << 17)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSWCK	BIT(16)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSW	BIT(15)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_CSMPS(x)	((x) << 13)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(x)	((x) << 10)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_BOOSTCK(x)	((x) << 8)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_BOOST(x)	((x) << 6)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_RESDI(x)	((x) << 0)
+
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG	0x0028
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_SLOWCK(x)	((x) << 30)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_SLOW(x)	((x) << 28)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_WIRE(x)	((x) << 18)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(x)	((x) << 14)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_EMPCK(x)	((x) << 11)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(x)	((x) << 7)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_EMP(x)	((x) << 4)
+#define SUN8I_HDMI_PHY_ANA_CFG3_SDAPD		BIT(3)
+#define SUN8I_HDMI_PHY_ANA_CFG3_SDAEN		BIT(2)
+#define SUN8I_HDMI_PHY_ANA_CFG3_SCLPD		BIT(1)
+#define SUN8I_HDMI_PHY_ANA_CFG3_SCLEN		BIT(0)
+
+#define SUN8I_HDMI_PHY_PLL_CFG1_REG	0x002c
+#define SUN8I_HDMI_PHY_PLL_CFG1_REG_OD1		BIT(31)
+#define SUN8I_HDMI_PHY_PLL_CFG1_REG_OD		BIT(30)
+#define SUN8I_HDMI_PHY_PLL_CFG1_LDO2_EN		BIT(29)
+#define SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN		BIT(28)
+#define SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33	BIT(27)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL	BIT(26)
+#define SUN8I_HDMI_PHY_PLL_CFG1_PLLEN		BIT(25)
+#define SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(x)	((x) << 22)
+#define SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(x)	((x) << 20)
+#define SUN8I_HDMI_PHY_PLL_CFG1_PLLDBEN		BIT(19)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CS		BIT(18)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CP_S(x)		((x) << 13)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(x)	((x) << 7)
+#define SUN8I_HDMI_PHY_PLL_CFG1_BWS		BIT(6)
+#define SUN8I_HDMI_PHY_PLL_CFG1_B_IN_MSK	GENMASK(5, 0)
+#define SUN8I_HDMI_PHY_PLL_CFG1_B_IN_SHIFT	0
+
+#define SUN8I_HDMI_PHY_PLL_CFG2_REG	0x0030
+#define SUN8I_HDMI_PHY_PLL_CFG2_SV_H		BIT(31)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PDCLKSEL(x)	((x) << 29)
+#define SUN8I_HDMI_PHY_PLL_CFG2_CLKSTEP(x)	((x) << 27)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PSET(x)		((x) << 24)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PCLK_SEL	BIT(23)
+#define SUN8I_HDMI_PHY_PLL_CFG2_AUTOSYNC_DIS	BIT(22)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VREG2_OUT_EN	BIT(21)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VREG1_OUT_EN	BIT(20)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VCOGAIN_EN	BIT(19)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VCOGAIN(x)	((x) << 16)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(x)	((x) << 12)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VCO_RST_IN	BIT(11)
+#define SUN8I_HDMI_PHY_PLL_CFG2_SINT_FRAC	BIT(10)
+#define SUN8I_HDMI_PHY_PLL_CFG2_SDIV2		BIT(9)
+#define SUN8I_HDMI_PHY_PLL_CFG2_S(x)		((x) << 6)
+#define SUN8I_HDMI_PHY_PLL_CFG2_S6P25_7P5	BIT(5)
+#define SUN8I_HDMI_PHY_PLL_CFG2_S5_7		BIT(4)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK	GENMASK(3, 0)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_SHIFT	0
+#define SUN8I_HDMI_PHY_PLL_CFG2_PREDIV(x)	(((x) - 1) << 0)
+
+#define SUN8I_HDMI_PHY_PLL_CFG3_REG	0x0034
+#define SUN8I_HDMI_PHY_PLL_CFG3_SOUT_DIV2	BIT(0)
+
+#define SUN8I_HDMI_PHY_ANA_STS_REG	0x0038
+#define SUN8I_HDMI_PHY_ANA_STS_B_OUT_SHIFT	11
+#define SUN8I_HDMI_PHY_ANA_STS_B_OUT_MSK	GENMASK(16, 11)
+#define SUN8I_HDMI_PHY_ANA_STS_RCALEND2D	BIT(7)
+#define SUN8I_HDMI_PHY_ANA_STS_RCAL_MASK	GENMASK(5, 0)
+
+#define SUN8I_HDMI_PHY_CEC_REG		0x003c
+
 struct sun8i_hdmi_phy;
 
 struct sun8i_hdmi_phy_variant {
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 17aada64bafd..16889bc0c62d 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -7,23 +7,6 @@
 
 #include "sun8i_dw_hdmi.h"
 
-#define SUN8I_HDMI_PHY_DBG_CTRL_REG	0x0000
-#define SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK		BIT(0)
-#define SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK	GENMASK(15, 8)
-#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC	BIT(8)
-#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC	BIT(9)
-#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR_MASK	GENMASK(23, 16)
-#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR(addr)	(addr << 16)
-
-#define SUN8I_HDMI_PHY_REXT_CTRL_REG	0x0004
-#define SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN	BIT(31)
-
-#define SUN8I_HDMI_PHY_READ_EN_REG	0x0010
-#define SUN8I_HDMI_PHY_READ_EN_MAGIC		0x54524545
-
-#define SUN8I_HDMI_PHY_UNSCRAMBLE_REG	0x0014
-#define SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC		0x42494E47
-
 /*
  * Address can be actually any value. Here is set to same value as
  * it is set in BSP driver.
-- 
2.16.2

[PATCH v2 11/16] drm/sun4i: Move and expand DW HDMI PHY register macros

[Jernej Skrabec]

DW HDMI PHY macros are moved to header file and expanded with the
registers present on newer SoCs like H3 and H5.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h  | 131 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c |  17 -----
 2 files changed, 131 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index 1e9eb6072615..49161326ea5a 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -12,6 +12,137 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#define SUN8I_HDMI_PHY_DBG_CTRL_REG	0x0000
+#define SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK		BIT(0)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK	GENMASK(15, 8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC	BIT(8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC	BIT(9)
+#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR_MASK	GENMASK(23, 16)
+#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR(addr)	(addr << 16)
+
+#define SUN8I_HDMI_PHY_REXT_CTRL_REG	0x0004
+#define SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN	BIT(31)
+
+#define SUN8I_HDMI_PHY_READ_EN_REG	0x0010
+#define SUN8I_HDMI_PHY_READ_EN_MAGIC		0x54524545
+
+#define SUN8I_HDMI_PHY_UNSCRAMBLE_REG	0x0014
+#define SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC		0x42494E47
+
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG	0x0020
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_SWI		BIT(31)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_PWEND	BIT(30)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_PWENC	BIT(29)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_CALSW	BIT(28)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_SVRCAL(x)	((x) << 26)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_SVBH(x)	((x) << 24)
+#define SUN8I_HDMI_PHY_ANA_CFG1_AMP_OPT		BIT(23)
+#define SUN8I_HDMI_PHY_ANA_CFG1_EMP_OPT		BIT(22)
+#define SUN8I_HDMI_PHY_ANA_CFG1_AMPCK_OPT	BIT(21)
+#define SUN8I_HDMI_PHY_ANA_CFG1_EMPCK_OPT	BIT(20)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENRCAL		BIT(19)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENCALOG		BIT(18)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_SCKTMDS	BIT(17)
+#define SUN8I_HDMI_PHY_ANA_CFG1_TMDSCLK_EN	BIT(16)
+#define SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK	GENMASK(15, 12)
+#define SUN8I_HDMI_PHY_ANA_CFG1_TXEN_ALL	(0xf << 12)
+#define SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDSCLK	BIT(11)
+#define SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS2	BIT(10)
+#define SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS1	BIT(9)
+#define SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS0	BIT(8)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDSCLK	BIT(7)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS2	BIT(6)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS1	BIT(5)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS0	BIT(4)
+#define SUN8I_HDMI_PHY_ANA_CFG1_CKEN		BIT(3)
+#define SUN8I_HDMI_PHY_ANA_CFG1_LDOEN		BIT(2)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENVBS		BIT(1)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENBI		BIT(0)
+
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG	0x0024
+#define SUN8I_HDMI_PHY_ANA_CFG2_M_EN		BIT(31)
+#define SUN8I_HDMI_PHY_ANA_CFG2_PLLDBEN		BIT(30)
+#define SUN8I_HDMI_PHY_ANA_CFG2_SEN		BIT(29)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_HPDPD	BIT(28)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_HPDEN	BIT(27)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_PLRCK	BIT(26)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_PLR(x)	((x) << 23)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_DENCK	BIT(22)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_DEN		BIT(21)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_CD(x)	((x) << 19)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_CKSS(x)	((x) << 17)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSWCK	BIT(16)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSW	BIT(15)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_CSMPS(x)	((x) << 13)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(x)	((x) << 10)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_BOOSTCK(x)	((x) << 8)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_BOOST(x)	((x) << 6)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_RESDI(x)	((x) << 0)
+
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG	0x0028
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_SLOWCK(x)	((x) << 30)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_SLOW(x)	((x) << 28)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_WIRE(x)	((x) << 18)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(x)	((x) << 14)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_EMPCK(x)	((x) << 11)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(x)	((x) << 7)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_EMP(x)	((x) << 4)
+#define SUN8I_HDMI_PHY_ANA_CFG3_SDAPD		BIT(3)
+#define SUN8I_HDMI_PHY_ANA_CFG3_SDAEN		BIT(2)
+#define SUN8I_HDMI_PHY_ANA_CFG3_SCLPD		BIT(1)
+#define SUN8I_HDMI_PHY_ANA_CFG3_SCLEN		BIT(0)
+
+#define SUN8I_HDMI_PHY_PLL_CFG1_REG	0x002c
+#define SUN8I_HDMI_PHY_PLL_CFG1_REG_OD1		BIT(31)
+#define SUN8I_HDMI_PHY_PLL_CFG1_REG_OD		BIT(30)
+#define SUN8I_HDMI_PHY_PLL_CFG1_LDO2_EN		BIT(29)
+#define SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN		BIT(28)
+#define SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33	BIT(27)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL	BIT(26)
+#define SUN8I_HDMI_PHY_PLL_CFG1_PLLEN		BIT(25)
+#define SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(x)	((x) << 22)
+#define SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(x)	((x) << 20)
+#define SUN8I_HDMI_PHY_PLL_CFG1_PLLDBEN		BIT(19)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CS		BIT(18)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CP_S(x)		((x) << 13)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(x)	((x) << 7)
+#define SUN8I_HDMI_PHY_PLL_CFG1_BWS		BIT(6)
+#define SUN8I_HDMI_PHY_PLL_CFG1_B_IN_MSK	GENMASK(5, 0)
+#define SUN8I_HDMI_PHY_PLL_CFG1_B_IN_SHIFT	0
+
+#define SUN8I_HDMI_PHY_PLL_CFG2_REG	0x0030
+#define SUN8I_HDMI_PHY_PLL_CFG2_SV_H		BIT(31)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PDCLKSEL(x)	((x) << 29)
+#define SUN8I_HDMI_PHY_PLL_CFG2_CLKSTEP(x)	((x) << 27)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PSET(x)		((x) << 24)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PCLK_SEL	BIT(23)
+#define SUN8I_HDMI_PHY_PLL_CFG2_AUTOSYNC_DIS	BIT(22)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VREG2_OUT_EN	BIT(21)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VREG1_OUT_EN	BIT(20)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VCOGAIN_EN	BIT(19)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VCOGAIN(x)	((x) << 16)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(x)	((x) << 12)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VCO_RST_IN	BIT(11)
+#define SUN8I_HDMI_PHY_PLL_CFG2_SINT_FRAC	BIT(10)
+#define SUN8I_HDMI_PHY_PLL_CFG2_SDIV2		BIT(9)
+#define SUN8I_HDMI_PHY_PLL_CFG2_S(x)		((x) << 6)
+#define SUN8I_HDMI_PHY_PLL_CFG2_S6P25_7P5	BIT(5)
+#define SUN8I_HDMI_PHY_PLL_CFG2_S5_7		BIT(4)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK	GENMASK(3, 0)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_SHIFT	0
+#define SUN8I_HDMI_PHY_PLL_CFG2_PREDIV(x)	(((x) - 1) << 0)
+
+#define SUN8I_HDMI_PHY_PLL_CFG3_REG	0x0034
+#define SUN8I_HDMI_PHY_PLL_CFG3_SOUT_DIV2	BIT(0)
+
+#define SUN8I_HDMI_PHY_ANA_STS_REG	0x0038
+#define SUN8I_HDMI_PHY_ANA_STS_B_OUT_SHIFT	11
+#define SUN8I_HDMI_PHY_ANA_STS_B_OUT_MSK	GENMASK(16, 11)
+#define SUN8I_HDMI_PHY_ANA_STS_RCALEND2D	BIT(7)
+#define SUN8I_HDMI_PHY_ANA_STS_RCAL_MASK	GENMASK(5, 0)
+
+#define SUN8I_HDMI_PHY_CEC_REG		0x003c
+
 struct sun8i_hdmi_phy;
 
 struct sun8i_hdmi_phy_variant {
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 17aada64bafd..16889bc0c62d 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -7,23 +7,6 @@
 
 #include "sun8i_dw_hdmi.h"
 
-#define SUN8I_HDMI_PHY_DBG_CTRL_REG	0x0000
-#define SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK		BIT(0)
-#define SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK	GENMASK(15, 8)
-#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC	BIT(8)
-#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC	BIT(9)
-#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR_MASK	GENMASK(23, 16)
-#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR(addr)	(addr << 16)
-
-#define SUN8I_HDMI_PHY_REXT_CTRL_REG	0x0004
-#define SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN	BIT(31)
-
-#define SUN8I_HDMI_PHY_READ_EN_REG	0x0010
-#define SUN8I_HDMI_PHY_READ_EN_MAGIC		0x54524545
-
-#define SUN8I_HDMI_PHY_UNSCRAMBLE_REG	0x0014
-#define SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC		0x42494E47
-
 /*
  * Address can be actually any value. Here is set to same value as
  * it is set in BSP driver.
-- 
2.16.2

[PATCH v2 11/16] drm/sun4i: Move and expand DW HDMI PHY register macros

[Jernej Skrabec]

DW HDMI PHY macros are moved to header file and expanded with the
registers present on newer SoCs like H3 and H5.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h  | 131 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c |  17 -----
 2 files changed, 131 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index 1e9eb6072615..49161326ea5a 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -12,6 +12,137 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#define SUN8I_HDMI_PHY_DBG_CTRL_REG	0x0000
+#define SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK		BIT(0)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK	GENMASK(15, 8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC	BIT(8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC	BIT(9)
+#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR_MASK	GENMASK(23, 16)
+#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR(addr)	(addr << 16)
+
+#define SUN8I_HDMI_PHY_REXT_CTRL_REG	0x0004
+#define SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN	BIT(31)
+
+#define SUN8I_HDMI_PHY_READ_EN_REG	0x0010
+#define SUN8I_HDMI_PHY_READ_EN_MAGIC		0x54524545
+
+#define SUN8I_HDMI_PHY_UNSCRAMBLE_REG	0x0014
+#define SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC		0x42494E47
+
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG	0x0020
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_SWI		BIT(31)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_PWEND	BIT(30)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_PWENC	BIT(29)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_CALSW	BIT(28)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_SVRCAL(x)	((x) << 26)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_SVBH(x)	((x) << 24)
+#define SUN8I_HDMI_PHY_ANA_CFG1_AMP_OPT		BIT(23)
+#define SUN8I_HDMI_PHY_ANA_CFG1_EMP_OPT		BIT(22)
+#define SUN8I_HDMI_PHY_ANA_CFG1_AMPCK_OPT	BIT(21)
+#define SUN8I_HDMI_PHY_ANA_CFG1_EMPCK_OPT	BIT(20)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENRCAL		BIT(19)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENCALOG		BIT(18)
+#define SUN8I_HDMI_PHY_ANA_CFG1_REG_SCKTMDS	BIT(17)
+#define SUN8I_HDMI_PHY_ANA_CFG1_TMDSCLK_EN	BIT(16)
+#define SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK	GENMASK(15, 12)
+#define SUN8I_HDMI_PHY_ANA_CFG1_TXEN_ALL	(0xf << 12)
+#define SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDSCLK	BIT(11)
+#define SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS2	BIT(10)
+#define SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS1	BIT(9)
+#define SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS0	BIT(8)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDSCLK	BIT(7)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS2	BIT(6)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS1	BIT(5)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS0	BIT(4)
+#define SUN8I_HDMI_PHY_ANA_CFG1_CKEN		BIT(3)
+#define SUN8I_HDMI_PHY_ANA_CFG1_LDOEN		BIT(2)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENVBS		BIT(1)
+#define SUN8I_HDMI_PHY_ANA_CFG1_ENBI		BIT(0)
+
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG	0x0024
+#define SUN8I_HDMI_PHY_ANA_CFG2_M_EN		BIT(31)
+#define SUN8I_HDMI_PHY_ANA_CFG2_PLLDBEN		BIT(30)
+#define SUN8I_HDMI_PHY_ANA_CFG2_SEN		BIT(29)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_HPDPD	BIT(28)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_HPDEN	BIT(27)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_PLRCK	BIT(26)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_PLR(x)	((x) << 23)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_DENCK	BIT(22)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_DEN		BIT(21)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_CD(x)	((x) << 19)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_CKSS(x)	((x) << 17)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSWCK	BIT(16)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSW	BIT(15)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_CSMPS(x)	((x) << 13)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(x)	((x) << 10)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_BOOSTCK(x)	((x) << 8)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_BOOST(x)	((x) << 6)
+#define SUN8I_HDMI_PHY_ANA_CFG2_REG_RESDI(x)	((x) << 0)
+
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG	0x0028
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_SLOWCK(x)	((x) << 30)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_SLOW(x)	((x) << 28)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_WIRE(x)	((x) << 18)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(x)	((x) << 14)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_EMPCK(x)	((x) << 11)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(x)	((x) << 7)
+#define SUN8I_HDMI_PHY_ANA_CFG3_REG_EMP(x)	((x) << 4)
+#define SUN8I_HDMI_PHY_ANA_CFG3_SDAPD		BIT(3)
+#define SUN8I_HDMI_PHY_ANA_CFG3_SDAEN		BIT(2)
+#define SUN8I_HDMI_PHY_ANA_CFG3_SCLPD		BIT(1)
+#define SUN8I_HDMI_PHY_ANA_CFG3_SCLEN		BIT(0)
+
+#define SUN8I_HDMI_PHY_PLL_CFG1_REG	0x002c
+#define SUN8I_HDMI_PHY_PLL_CFG1_REG_OD1		BIT(31)
+#define SUN8I_HDMI_PHY_PLL_CFG1_REG_OD		BIT(30)
+#define SUN8I_HDMI_PHY_PLL_CFG1_LDO2_EN		BIT(29)
+#define SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN		BIT(28)
+#define SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33	BIT(27)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL	BIT(26)
+#define SUN8I_HDMI_PHY_PLL_CFG1_PLLEN		BIT(25)
+#define SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(x)	((x) << 22)
+#define SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(x)	((x) << 20)
+#define SUN8I_HDMI_PHY_PLL_CFG1_PLLDBEN		BIT(19)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CS		BIT(18)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CP_S(x)		((x) << 13)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(x)	((x) << 7)
+#define SUN8I_HDMI_PHY_PLL_CFG1_BWS		BIT(6)
+#define SUN8I_HDMI_PHY_PLL_CFG1_B_IN_MSK	GENMASK(5, 0)
+#define SUN8I_HDMI_PHY_PLL_CFG1_B_IN_SHIFT	0
+
+#define SUN8I_HDMI_PHY_PLL_CFG2_REG	0x0030
+#define SUN8I_HDMI_PHY_PLL_CFG2_SV_H		BIT(31)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PDCLKSEL(x)	((x) << 29)
+#define SUN8I_HDMI_PHY_PLL_CFG2_CLKSTEP(x)	((x) << 27)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PSET(x)		((x) << 24)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PCLK_SEL	BIT(23)
+#define SUN8I_HDMI_PHY_PLL_CFG2_AUTOSYNC_DIS	BIT(22)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VREG2_OUT_EN	BIT(21)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VREG1_OUT_EN	BIT(20)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VCOGAIN_EN	BIT(19)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VCOGAIN(x)	((x) << 16)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(x)	((x) << 12)
+#define SUN8I_HDMI_PHY_PLL_CFG2_VCO_RST_IN	BIT(11)
+#define SUN8I_HDMI_PHY_PLL_CFG2_SINT_FRAC	BIT(10)
+#define SUN8I_HDMI_PHY_PLL_CFG2_SDIV2		BIT(9)
+#define SUN8I_HDMI_PHY_PLL_CFG2_S(x)		((x) << 6)
+#define SUN8I_HDMI_PHY_PLL_CFG2_S6P25_7P5	BIT(5)
+#define SUN8I_HDMI_PHY_PLL_CFG2_S5_7		BIT(4)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK	GENMASK(3, 0)
+#define SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_SHIFT	0
+#define SUN8I_HDMI_PHY_PLL_CFG2_PREDIV(x)	(((x) - 1) << 0)
+
+#define SUN8I_HDMI_PHY_PLL_CFG3_REG	0x0034
+#define SUN8I_HDMI_PHY_PLL_CFG3_SOUT_DIV2	BIT(0)
+
+#define SUN8I_HDMI_PHY_ANA_STS_REG	0x0038
+#define SUN8I_HDMI_PHY_ANA_STS_B_OUT_SHIFT	11
+#define SUN8I_HDMI_PHY_ANA_STS_B_OUT_MSK	GENMASK(16, 11)
+#define SUN8I_HDMI_PHY_ANA_STS_RCALEND2D	BIT(7)
+#define SUN8I_HDMI_PHY_ANA_STS_RCAL_MASK	GENMASK(5, 0)
+
+#define SUN8I_HDMI_PHY_CEC_REG		0x003c
+
 struct sun8i_hdmi_phy;
 
 struct sun8i_hdmi_phy_variant {
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 17aada64bafd..16889bc0c62d 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -7,23 +7,6 @@
 
 #include "sun8i_dw_hdmi.h"
 
-#define SUN8I_HDMI_PHY_DBG_CTRL_REG	0x0000
-#define SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK		BIT(0)
-#define SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK	GENMASK(15, 8)
-#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC	BIT(8)
-#define SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC	BIT(9)
-#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR_MASK	GENMASK(23, 16)
-#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR(addr)	(addr << 16)
-
-#define SUN8I_HDMI_PHY_REXT_CTRL_REG	0x0004
-#define SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN	BIT(31)
-
-#define SUN8I_HDMI_PHY_READ_EN_REG	0x0010
-#define SUN8I_HDMI_PHY_READ_EN_MAGIC		0x54524545
-
-#define SUN8I_HDMI_PHY_UNSCRAMBLE_REG	0x0014
-#define SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC		0x42494E47
-
 /*
  * Address can be actually any value. Here is set to same value as
  * it is set in BSP driver.
-- 
2.16.2

[PATCH v2 12/16] drm/sun4i: Add support for H3 HDMI PHY variant

[Jernej Skrabec]

While A83T HDMI PHY seems to be just customized Synopsys HDMI PHY, H3
HDMI PHY is completely custom PHY.

However, they still have many things in common like clock and reset
setup, setting sync polarity and more.

Add support for H3 HDMI PHY variant.

While documentation exists for this PHY variant, it doesn't go in great
details. Because of that, almost all settings are copied from BSP linux
4.4. Interestingly, those settings are slightly different to those found
in a older BSP with Linux 3.4. For now, no user visible difference was
found between them.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/Makefile             |   1 +
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h      |   6 +
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c     | 264 ++++++++++++++++++++++++++++-
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c | 132 +++++++++++++++
 4 files changed, 400 insertions(+), 3 deletions(-)
 create mode 100644 drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c

diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
index 1610e748119b..330843ce4280 100644
--- a/drivers/gpu/drm/sun4i/Makefile
+++ b/drivers/gpu/drm/sun4i/Makefile
@@ -12,6 +12,7 @@ sun4i-drm-hdmi-y		+= sun4i_hdmi_tmds_clk.o
 
 sun8i-drm-hdmi-y		+= sun8i_dw_hdmi.o
 sun8i-drm-hdmi-y		+= sun8i_hdmi_phy.o
+sun8i-drm-hdmi-y		+= sun8i_hdmi_phy_clk.o
 
 sun8i-mixer-y			+= sun8i_mixer.o sun8i_ui_layer.o \
 				   sun8i_vi_layer.o sun8i_ui_scaler.o \
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index 49161326ea5a..79154f0f674a 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -146,6 +146,7 @@
 struct sun8i_hdmi_phy;
 
 struct sun8i_hdmi_phy_variant {
+	bool has_phy_clk;
 	void (*phy_init)(struct sun8i_hdmi_phy *phy);
 	void (*phy_disable)(struct dw_hdmi *hdmi,
 			    struct sun8i_hdmi_phy *phy);
@@ -157,6 +158,9 @@ struct sun8i_hdmi_phy_variant {
 struct sun8i_hdmi_phy {
 	struct clk			*clk_bus;
 	struct clk			*clk_mod;
+	struct clk			*clk_phy;
+	struct clk			*clk_pll0;
+	unsigned int			rcal;
 	struct regmap			*regs;
 	struct reset_control		*rst_phy;
 	struct sun8i_hdmi_phy_variant	*variant;
@@ -184,4 +188,6 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi);
 void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy);
 const struct dw_hdmi_phy_ops *sun8i_hdmi_phy_get_ops(void);
 
+int sun8i_phy_clk_create(struct sun8i_hdmi_phy *phy, struct device *dev);
+
 #endif /* _SUN8I_DW_HDMI_H_ */
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 16889bc0c62d..5a52fc489a9d 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2018 Jernej Skrabec <jernej.skrabec@siol.net>
  */
 
+#include <linux/delay.h>
 #include <linux/of_address.h>
 
 #include "sun8i_dw_hdmi.h"
@@ -73,7 +74,148 @@ static int sun8i_hdmi_phy_config_a83t(struct dw_hdmi *hdmi,
 	dw_hdmi_phy_gen2_txpwron(hdmi, 1);
 
 	return 0;
-};
+}
+
+static int sun8i_hdmi_phy_config_h3(struct dw_hdmi *hdmi,
+				    struct sun8i_hdmi_phy *phy,
+				    unsigned int clk_rate)
+{
+	u32 pll_cfg1_init;
+	u32 pll_cfg2_init;
+	u32 ana_cfg1_end;
+	u32 ana_cfg2_init;
+	u32 ana_cfg3_init;
+	u32 b_offset = 0;
+	u32 val;
+
+	/* bandwidth / frequency independent settings */
+
+	pll_cfg1_init = SUN8I_HDMI_PHY_PLL_CFG1_LDO2_EN |
+			SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN |
+			SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(7) |
+			SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(1) |
+			SUN8I_HDMI_PHY_PLL_CFG1_PLLDBEN |
+			SUN8I_HDMI_PHY_PLL_CFG1_CS |
+			SUN8I_HDMI_PHY_PLL_CFG1_CP_S(2) |
+			SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(63) |
+			SUN8I_HDMI_PHY_PLL_CFG1_BWS;
+
+	pll_cfg2_init = SUN8I_HDMI_PHY_PLL_CFG2_SV_H |
+			SUN8I_HDMI_PHY_PLL_CFG2_VCOGAIN_EN |
+			SUN8I_HDMI_PHY_PLL_CFG2_SDIV2;
+
+	ana_cfg1_end = SUN8I_HDMI_PHY_ANA_CFG1_REG_SVBH(1) |
+		       SUN8I_HDMI_PHY_ANA_CFG1_AMP_OPT |
+		       SUN8I_HDMI_PHY_ANA_CFG1_EMP_OPT |
+		       SUN8I_HDMI_PHY_ANA_CFG1_AMPCK_OPT |
+		       SUN8I_HDMI_PHY_ANA_CFG1_EMPCK_OPT |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENRCAL |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENCALOG |
+		       SUN8I_HDMI_PHY_ANA_CFG1_REG_SCKTMDS |
+		       SUN8I_HDMI_PHY_ANA_CFG1_TMDSCLK_EN |
+		       SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK |
+		       SUN8I_HDMI_PHY_ANA_CFG1_TXEN_ALL |
+		       SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDSCLK |
+		       SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS2 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS1 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS0 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS2 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS1 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS0 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_CKEN |
+		       SUN8I_HDMI_PHY_ANA_CFG1_LDOEN |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENVBS |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENBI;
+
+	ana_cfg2_init = SUN8I_HDMI_PHY_ANA_CFG2_M_EN |
+			SUN8I_HDMI_PHY_ANA_CFG2_REG_DENCK |
+			SUN8I_HDMI_PHY_ANA_CFG2_REG_DEN |
+			SUN8I_HDMI_PHY_ANA_CFG2_REG_CKSS(1) |
+			SUN8I_HDMI_PHY_ANA_CFG2_REG_CSMPS(1);
+
+	ana_cfg3_init = SUN8I_HDMI_PHY_ANA_CFG3_REG_WIRE(0x3e0) |
+			SUN8I_HDMI_PHY_ANA_CFG3_SDAEN |
+			SUN8I_HDMI_PHY_ANA_CFG3_SCLEN;
+
+	/* bandwidth / frequency dependent settings */
+	if (clk_rate <= 27000000) {
+		pll_cfg1_init |= SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 |
+				 SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(32);
+		pll_cfg2_init |= SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(4) |
+				 SUN8I_HDMI_PHY_PLL_CFG2_S(4);
+		ana_cfg1_end |= SUN8I_HDMI_PHY_ANA_CFG1_REG_CALSW;
+		ana_cfg2_init |= SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(4) |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_RESDI(phy->rcal);
+		ana_cfg3_init |= SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(3) |
+				 SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(5);
+	} else if (clk_rate <= 74250000) {
+		pll_cfg1_init |= SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 |
+				 SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(32);
+		pll_cfg2_init |= SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(4) |
+				 SUN8I_HDMI_PHY_PLL_CFG2_S(5);
+		ana_cfg1_end |= SUN8I_HDMI_PHY_ANA_CFG1_REG_CALSW;
+		ana_cfg2_init |= SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(4) |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_RESDI(phy->rcal);
+		ana_cfg3_init |= SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(5) |
+				 SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(7);
+	} else if (clk_rate <= 148500000) {
+		pll_cfg1_init |= SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 |
+				 SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(32);
+		pll_cfg2_init |= SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(4) |
+				 SUN8I_HDMI_PHY_PLL_CFG2_S(6);
+		ana_cfg2_init |= SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSWCK |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSW |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(2);
+		ana_cfg3_init |= SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(7) |
+				 SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(9);
+	} else {
+		b_offset = 2;
+		pll_cfg1_init |= SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(63);
+		pll_cfg2_init |= SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(6) |
+				 SUN8I_HDMI_PHY_PLL_CFG2_S(7);
+		ana_cfg2_init |= SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSWCK |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSW |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(4);
+		ana_cfg3_init |= SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(9) |
+				 SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(13);
+	}
+
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK, 0);
+
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, pll_cfg1_init);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG,
+			   (u32)~SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK,
+			   pll_cfg2_init);
+	usleep_range(10000, 15000);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG3_REG,
+		     SUN8I_HDMI_PHY_PLL_CFG3_SOUT_DIV2);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
+			   SUN8I_HDMI_PHY_PLL_CFG1_PLLEN,
+			   SUN8I_HDMI_PHY_PLL_CFG1_PLLEN);
+	msleep(100);
+
+	/* get B value */
+	regmap_read(phy->regs, SUN8I_HDMI_PHY_ANA_STS_REG, &val);
+	val = (val & SUN8I_HDMI_PHY_ANA_STS_B_OUT_MSK) >>
+		SUN8I_HDMI_PHY_ANA_STS_B_OUT_SHIFT;
+	val = min(val + b_offset, (u32)0x3f);
+
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
+			   SUN8I_HDMI_PHY_PLL_CFG1_REG_OD1 |
+			   SUN8I_HDMI_PHY_PLL_CFG1_REG_OD,
+			   SUN8I_HDMI_PHY_PLL_CFG1_REG_OD1 |
+			   SUN8I_HDMI_PHY_PLL_CFG1_REG_OD);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
+			   SUN8I_HDMI_PHY_PLL_CFG1_B_IN_MSK,
+			   val << SUN8I_HDMI_PHY_PLL_CFG1_B_IN_SHIFT);
+	msleep(100);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG, ana_cfg1_end);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG2_REG, ana_cfg2_init);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG3_REG, ana_cfg3_init);
+
+	return 0;
+}
 
 static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 				 struct drm_display_mode *mode)
@@ -90,6 +232,9 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
 			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
 
+	if (phy->variant->has_phy_clk)
+		clk_set_rate(phy->clk_phy, mode->crtc_clock * 1000);
+
 	return phy->variant->phy_config(hdmi, phy, mode->crtc_clock * 1000);
 };
 
@@ -103,6 +248,16 @@ static void sun8i_hdmi_phy_disable_a83t(struct dw_hdmi *hdmi,
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN, 0);
 }
 
+static void sun8i_hdmi_phy_disable_h3(struct dw_hdmi *hdmi,
+				      struct sun8i_hdmi_phy *phy)
+{
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+		     SUN8I_HDMI_PHY_ANA_CFG1_LDOEN |
+		     SUN8I_HDMI_PHY_ANA_CFG1_ENVBS |
+		     SUN8I_HDMI_PHY_ANA_CFG1_ENBI);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, 0);
+}
+
 static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
 {
 	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
@@ -133,6 +288,78 @@ static void sun8i_hdmi_phy_init_a83t(struct sun8i_hdmi_phy *phy)
 			   SUN8I_HDMI_PHY_DBG_CTRL_ADDR(I2C_ADDR));
 }
 
+static void sun8i_hdmi_phy_init_h3(struct sun8i_hdmi_phy *phy)
+{
+	unsigned int val;
+
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG, 0);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENBI,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENBI);
+	udelay(5);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_TMDSCLK_EN,
+			   SUN8I_HDMI_PHY_ANA_CFG1_TMDSCLK_EN);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENVBS,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENVBS);
+	usleep_range(10, 20);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_LDOEN,
+			   SUN8I_HDMI_PHY_ANA_CFG1_LDOEN);
+	udelay(5);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_CKEN,
+			   SUN8I_HDMI_PHY_ANA_CFG1_CKEN);
+	usleep_range(40, 100);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENRCAL,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENRCAL);
+	usleep_range(100, 200);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENCALOG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENCALOG);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS0 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS1 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS2,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS0 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS1 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS2);
+
+	/* wait for calibration to finish */
+	regmap_read_poll_timeout(phy->regs, SUN8I_HDMI_PHY_ANA_STS_REG, val,
+				 (val & SUN8I_HDMI_PHY_ANA_STS_RCALEND2D),
+				 100, 2000);
+
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDSCLK,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDSCLK);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS0 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS1 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS2 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDSCLK,
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS0 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS1 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS2 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDSCLK);
+
+	/* enable DDC communication */
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG3_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG3_SCLEN |
+			   SUN8I_HDMI_PHY_ANA_CFG3_SDAEN,
+			   SUN8I_HDMI_PHY_ANA_CFG3_SCLEN |
+			   SUN8I_HDMI_PHY_ANA_CFG3_SDAEN);
+
+	/* set HW control of CEC pins */
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_CEC_REG, 0);
+
+	/* read calibration data */
+	regmap_read(phy->regs, SUN8I_HDMI_PHY_ANA_STS_REG, &val);
+	phy->rcal = (val & SUN8I_HDMI_PHY_ANA_STS_RCAL_MASK) >> 2;
+}
+
 void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
 {
 	/* enable read access to HDMI controller */
@@ -155,7 +382,7 @@ static struct regmap_config sun8i_hdmi_phy_regmap_config = {
 	.reg_bits	= 32,
 	.val_bits	= 32,
 	.reg_stride	= 4,
-	.max_register	= SUN8I_HDMI_PHY_UNSCRAMBLE_REG,
+	.max_register	= SUN8I_HDMI_PHY_CEC_REG,
 	.name		= "phy"
 };
 
@@ -165,11 +392,22 @@ static const struct sun8i_hdmi_phy_variant sun8i_a83t_hdmi_phy = {
 	.phy_config = &sun8i_hdmi_phy_config_a83t,
 };
 
+static const struct sun8i_hdmi_phy_variant sun8i_h3_hdmi_phy = {
+	.has_phy_clk = true,
+	.phy_init = &sun8i_hdmi_phy_init_h3,
+	.phy_disable = &sun8i_hdmi_phy_disable_h3,
+	.phy_config = &sun8i_hdmi_phy_config_h3,
+};
+
 static const struct of_device_id sun8i_hdmi_phy_of_table[] = {
 	{
 		.compatible = "allwinner,sun8i-a83t-hdmi-phy",
 		.data = &sun8i_a83t_hdmi_phy,
 	},
+	{
+		.compatible = "allwinner,sun8i-h3-hdmi-phy",
+		.data = &sun8i_h3_hdmi_phy,
+	},
 	{ /* sentinel */ }
 };
 
@@ -226,11 +464,26 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 		goto err_put_clk_bus;
 	}
 
+	if (phy->variant->has_phy_clk) {
+		phy->clk_pll0 = of_clk_get_by_name(node, "pll-0");
+		if (IS_ERR(phy->clk_pll0)) {
+			dev_err(dev, "Could not get pll-0 clock\n");
+			ret = PTR_ERR(phy->clk_pll0);
+			goto err_put_clk_mod;
+		}
+
+		ret = sun8i_phy_clk_create(phy, dev);
+		if (ret) {
+			dev_err(dev, "Couldn't create the PHY clock\n");
+			goto err_put_clk_pll0;
+		}
+	}
+
 	phy->rst_phy = of_reset_control_get_shared(node, "phy");
 	if (IS_ERR(phy->rst_phy)) {
 		dev_err(dev, "Could not get phy reset control\n");
 		ret = PTR_ERR(phy->rst_phy);
-		goto err_put_clk_mod;
+		goto err_put_clk_pll0;
 	}
 
 	ret = reset_control_deassert(phy->rst_phy);
@@ -261,6 +514,9 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 	reset_control_assert(phy->rst_phy);
 err_put_rst_phy:
 	reset_control_put(phy->rst_phy);
+err_put_clk_pll0:
+	if (phy->variant->has_phy_clk)
+		clk_put(phy->clk_pll0);
 err_put_clk_mod:
 	clk_put(phy->clk_mod);
 err_put_clk_bus:
@@ -280,6 +536,8 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi)
 
 	reset_control_put(phy->rst_phy);
 
+	if (phy->variant->has_phy_clk)
+		clk_put(phy->clk_pll0);
 	clk_put(phy->clk_mod);
 	clk_put(phy->clk_bus);
 }
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c
new file mode 100644
index 000000000000..faea449812f8
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jernej Skrabec <jernej.skrabec@siol.net>
+ */
+
+#include <linux/clk-provider.h>
+
+#include "sun8i_dw_hdmi.h"
+
+struct sun8i_phy_clk {
+	struct clk_hw		hw;
+	struct sun8i_hdmi_phy	*phy;
+};
+
+static inline struct sun8i_phy_clk *hw_to_phy_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct sun8i_phy_clk, hw);
+}
+
+static int sun8i_phy_clk_determine_rate(struct clk_hw *hw,
+					struct clk_rate_request *req)
+{
+	unsigned long rate = req->rate;
+	unsigned long best_rate = 0;
+	struct clk_hw *parent;
+	int best_div = 1;
+	int i;
+
+	parent = clk_hw_get_parent(hw);
+
+	for (i = 1; i <= 16; i++) {
+		unsigned long ideal = rate * i;
+		unsigned long rounded;
+
+		rounded = clk_hw_round_rate(parent, ideal);
+
+		if (rounded == ideal) {
+			best_rate = rounded;
+			best_div = i;
+			break;
+		}
+
+		if (!best_rate ||
+		    abs(rate - rounded / i) <
+		    abs(rate - best_rate / best_div)) {
+			best_rate = rounded;
+			best_div = i;
+		}
+	}
+
+	req->rate = best_rate / best_div;
+	req->best_parent_rate = best_rate;
+	req->best_parent_hw = parent;
+
+	return 0;
+}
+
+static unsigned long sun8i_phy_clk_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct sun8i_phy_clk *priv = hw_to_phy_clk(hw);
+	u32 reg;
+
+	regmap_read(priv->phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG, &reg);
+	reg = ((reg >> SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_SHIFT) &
+		SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK) + 1;
+
+	return parent_rate / reg;
+}
+
+static int sun8i_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long parent_rate)
+{
+	struct sun8i_phy_clk *priv = hw_to_phy_clk(hw);
+	unsigned long best_rate = 0;
+	u8 best_m = 0, m;
+
+	for (m = 1; m <= 16; m++) {
+		unsigned long tmp_rate = parent_rate / m;
+
+		if (tmp_rate > rate)
+			continue;
+
+		if (!best_rate ||
+		    (rate - tmp_rate) < (rate - best_rate)) {
+			best_rate = tmp_rate;
+			best_m = m;
+		}
+	}
+
+	regmap_update_bits(priv->phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG,
+			   SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK,
+			   SUN8I_HDMI_PHY_PLL_CFG2_PREDIV(best_m));
+
+	return 0;
+}
+
+static const struct clk_ops sun8i_phy_clk_ops = {
+	.determine_rate	= sun8i_phy_clk_determine_rate,
+	.recalc_rate	= sun8i_phy_clk_recalc_rate,
+	.set_rate	= sun8i_phy_clk_set_rate,
+};
+
+int sun8i_phy_clk_create(struct sun8i_hdmi_phy *phy, struct device *dev)
+{
+	struct clk_init_data init;
+	struct sun8i_phy_clk *priv;
+	const char *parents[1];
+
+	parents[0] = __clk_get_name(phy->clk_pll0);
+	if (!parents[0])
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	init.name = "hdmi-phy-clk";
+	init.ops = &sun8i_phy_clk_ops;
+	init.parent_names = parents;
+	init.num_parents = 1;
+	init.flags = CLK_SET_RATE_PARENT;
+
+	priv->phy = phy;
+	priv->hw.init = &init;
+
+	phy->clk_phy = devm_clk_register(dev, &priv->hw);
+	if (IS_ERR(phy->clk_phy))
+		return PTR_ERR(phy->clk_phy);
+
+	return 0;
+}
-- 
2.16.2

[PATCH v2 12/16] drm/sun4i: Add support for H3 HDMI PHY variant

[Jernej Skrabec]

While A83T HDMI PHY seems to be just customized Synopsys HDMI PHY, H3
HDMI PHY is completely custom PHY.

However, they still have many things in common like clock and reset
setup, setting sync polarity and more.

Add support for H3 HDMI PHY variant.

While documentation exists for this PHY variant, it doesn't go in great
details. Because of that, almost all settings are copied from BSP linux
4.4. Interestingly, those settings are slightly different to those found
in a older BSP with Linux 3.4. For now, no user visible difference was
found between them.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 drivers/gpu/drm/sun4i/Makefile             |   1 +
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h      |   6 +
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c     | 264 ++++++++++++++++++++++++++++-
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c | 132 +++++++++++++++
 4 files changed, 400 insertions(+), 3 deletions(-)
 create mode 100644 drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c

diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
index 1610e748119b..330843ce4280 100644
--- a/drivers/gpu/drm/sun4i/Makefile
+++ b/drivers/gpu/drm/sun4i/Makefile
@@ -12,6 +12,7 @@ sun4i-drm-hdmi-y		+= sun4i_hdmi_tmds_clk.o
 
 sun8i-drm-hdmi-y		+= sun8i_dw_hdmi.o
 sun8i-drm-hdmi-y		+= sun8i_hdmi_phy.o
+sun8i-drm-hdmi-y		+= sun8i_hdmi_phy_clk.o
 
 sun8i-mixer-y			+= sun8i_mixer.o sun8i_ui_layer.o \
 				   sun8i_vi_layer.o sun8i_ui_scaler.o \
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index 49161326ea5a..79154f0f674a 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -146,6 +146,7 @@
 struct sun8i_hdmi_phy;
 
 struct sun8i_hdmi_phy_variant {
+	bool has_phy_clk;
 	void (*phy_init)(struct sun8i_hdmi_phy *phy);
 	void (*phy_disable)(struct dw_hdmi *hdmi,
 			    struct sun8i_hdmi_phy *phy);
@@ -157,6 +158,9 @@ struct sun8i_hdmi_phy_variant {
 struct sun8i_hdmi_phy {
 	struct clk			*clk_bus;
 	struct clk			*clk_mod;
+	struct clk			*clk_phy;
+	struct clk			*clk_pll0;
+	unsigned int			rcal;
 	struct regmap			*regs;
 	struct reset_control		*rst_phy;
 	struct sun8i_hdmi_phy_variant	*variant;
@@ -184,4 +188,6 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi);
 void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy);
 const struct dw_hdmi_phy_ops *sun8i_hdmi_phy_get_ops(void);
 
+int sun8i_phy_clk_create(struct sun8i_hdmi_phy *phy, struct device *dev);
+
 #endif /* _SUN8I_DW_HDMI_H_ */
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 16889bc0c62d..5a52fc489a9d 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2018 Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
  */
 
+#include <linux/delay.h>
 #include <linux/of_address.h>
 
 #include "sun8i_dw_hdmi.h"
@@ -73,7 +74,148 @@ static int sun8i_hdmi_phy_config_a83t(struct dw_hdmi *hdmi,
 	dw_hdmi_phy_gen2_txpwron(hdmi, 1);
 
 	return 0;
-};
+}
+
+static int sun8i_hdmi_phy_config_h3(struct dw_hdmi *hdmi,
+				    struct sun8i_hdmi_phy *phy,
+				    unsigned int clk_rate)
+{
+	u32 pll_cfg1_init;
+	u32 pll_cfg2_init;
+	u32 ana_cfg1_end;
+	u32 ana_cfg2_init;
+	u32 ana_cfg3_init;
+	u32 b_offset = 0;
+	u32 val;
+
+	/* bandwidth / frequency independent settings */
+
+	pll_cfg1_init = SUN8I_HDMI_PHY_PLL_CFG1_LDO2_EN |
+			SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN |
+			SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(7) |
+			SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(1) |
+			SUN8I_HDMI_PHY_PLL_CFG1_PLLDBEN |
+			SUN8I_HDMI_PHY_PLL_CFG1_CS |
+			SUN8I_HDMI_PHY_PLL_CFG1_CP_S(2) |
+			SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(63) |
+			SUN8I_HDMI_PHY_PLL_CFG1_BWS;
+
+	pll_cfg2_init = SUN8I_HDMI_PHY_PLL_CFG2_SV_H |
+			SUN8I_HDMI_PHY_PLL_CFG2_VCOGAIN_EN |
+			SUN8I_HDMI_PHY_PLL_CFG2_SDIV2;
+
+	ana_cfg1_end = SUN8I_HDMI_PHY_ANA_CFG1_REG_SVBH(1) |
+		       SUN8I_HDMI_PHY_ANA_CFG1_AMP_OPT |
+		       SUN8I_HDMI_PHY_ANA_CFG1_EMP_OPT |
+		       SUN8I_HDMI_PHY_ANA_CFG1_AMPCK_OPT |
+		       SUN8I_HDMI_PHY_ANA_CFG1_EMPCK_OPT |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENRCAL |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENCALOG |
+		       SUN8I_HDMI_PHY_ANA_CFG1_REG_SCKTMDS |
+		       SUN8I_HDMI_PHY_ANA_CFG1_TMDSCLK_EN |
+		       SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK |
+		       SUN8I_HDMI_PHY_ANA_CFG1_TXEN_ALL |
+		       SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDSCLK |
+		       SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS2 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS1 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS0 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS2 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS1 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS0 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_CKEN |
+		       SUN8I_HDMI_PHY_ANA_CFG1_LDOEN |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENVBS |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENBI;
+
+	ana_cfg2_init = SUN8I_HDMI_PHY_ANA_CFG2_M_EN |
+			SUN8I_HDMI_PHY_ANA_CFG2_REG_DENCK |
+			SUN8I_HDMI_PHY_ANA_CFG2_REG_DEN |
+			SUN8I_HDMI_PHY_ANA_CFG2_REG_CKSS(1) |
+			SUN8I_HDMI_PHY_ANA_CFG2_REG_CSMPS(1);
+
+	ana_cfg3_init = SUN8I_HDMI_PHY_ANA_CFG3_REG_WIRE(0x3e0) |
+			SUN8I_HDMI_PHY_ANA_CFG3_SDAEN |
+			SUN8I_HDMI_PHY_ANA_CFG3_SCLEN;
+
+	/* bandwidth / frequency dependent settings */
+	if (clk_rate <= 27000000) {
+		pll_cfg1_init |= SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 |
+				 SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(32);
+		pll_cfg2_init |= SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(4) |
+				 SUN8I_HDMI_PHY_PLL_CFG2_S(4);
+		ana_cfg1_end |= SUN8I_HDMI_PHY_ANA_CFG1_REG_CALSW;
+		ana_cfg2_init |= SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(4) |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_RESDI(phy->rcal);
+		ana_cfg3_init |= SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(3) |
+				 SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(5);
+	} else if (clk_rate <= 74250000) {
+		pll_cfg1_init |= SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 |
+				 SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(32);
+		pll_cfg2_init |= SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(4) |
+				 SUN8I_HDMI_PHY_PLL_CFG2_S(5);
+		ana_cfg1_end |= SUN8I_HDMI_PHY_ANA_CFG1_REG_CALSW;
+		ana_cfg2_init |= SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(4) |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_RESDI(phy->rcal);
+		ana_cfg3_init |= SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(5) |
+				 SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(7);
+	} else if (clk_rate <= 148500000) {
+		pll_cfg1_init |= SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 |
+				 SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(32);
+		pll_cfg2_init |= SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(4) |
+				 SUN8I_HDMI_PHY_PLL_CFG2_S(6);
+		ana_cfg2_init |= SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSWCK |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSW |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(2);
+		ana_cfg3_init |= SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(7) |
+				 SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(9);
+	} else {
+		b_offset = 2;
+		pll_cfg1_init |= SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(63);
+		pll_cfg2_init |= SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(6) |
+				 SUN8I_HDMI_PHY_PLL_CFG2_S(7);
+		ana_cfg2_init |= SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSWCK |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSW |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(4);
+		ana_cfg3_init |= SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(9) |
+				 SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(13);
+	}
+
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK, 0);
+
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, pll_cfg1_init);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG,
+			   (u32)~SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK,
+			   pll_cfg2_init);
+	usleep_range(10000, 15000);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG3_REG,
+		     SUN8I_HDMI_PHY_PLL_CFG3_SOUT_DIV2);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
+			   SUN8I_HDMI_PHY_PLL_CFG1_PLLEN,
+			   SUN8I_HDMI_PHY_PLL_CFG1_PLLEN);
+	msleep(100);
+
+	/* get B value */
+	regmap_read(phy->regs, SUN8I_HDMI_PHY_ANA_STS_REG, &val);
+	val = (val & SUN8I_HDMI_PHY_ANA_STS_B_OUT_MSK) >>
+		SUN8I_HDMI_PHY_ANA_STS_B_OUT_SHIFT;
+	val = min(val + b_offset, (u32)0x3f);
+
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
+			   SUN8I_HDMI_PHY_PLL_CFG1_REG_OD1 |
+			   SUN8I_HDMI_PHY_PLL_CFG1_REG_OD,
+			   SUN8I_HDMI_PHY_PLL_CFG1_REG_OD1 |
+			   SUN8I_HDMI_PHY_PLL_CFG1_REG_OD);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
+			   SUN8I_HDMI_PHY_PLL_CFG1_B_IN_MSK,
+			   val << SUN8I_HDMI_PHY_PLL_CFG1_B_IN_SHIFT);
+	msleep(100);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG, ana_cfg1_end);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG2_REG, ana_cfg2_init);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG3_REG, ana_cfg3_init);
+
+	return 0;
+}
 
 static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 				 struct drm_display_mode *mode)
@@ -90,6 +232,9 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
 			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
 
+	if (phy->variant->has_phy_clk)
+		clk_set_rate(phy->clk_phy, mode->crtc_clock * 1000);
+
 	return phy->variant->phy_config(hdmi, phy, mode->crtc_clock * 1000);
 };
 
@@ -103,6 +248,16 @@ static void sun8i_hdmi_phy_disable_a83t(struct dw_hdmi *hdmi,
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN, 0);
 }
 
+static void sun8i_hdmi_phy_disable_h3(struct dw_hdmi *hdmi,
+				      struct sun8i_hdmi_phy *phy)
+{
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+		     SUN8I_HDMI_PHY_ANA_CFG1_LDOEN |
+		     SUN8I_HDMI_PHY_ANA_CFG1_ENVBS |
+		     SUN8I_HDMI_PHY_ANA_CFG1_ENBI);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, 0);
+}
+
 static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
 {
 	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
@@ -133,6 +288,78 @@ static void sun8i_hdmi_phy_init_a83t(struct sun8i_hdmi_phy *phy)
 			   SUN8I_HDMI_PHY_DBG_CTRL_ADDR(I2C_ADDR));
 }
 
+static void sun8i_hdmi_phy_init_h3(struct sun8i_hdmi_phy *phy)
+{
+	unsigned int val;
+
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG, 0);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENBI,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENBI);
+	udelay(5);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_TMDSCLK_EN,
+			   SUN8I_HDMI_PHY_ANA_CFG1_TMDSCLK_EN);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENVBS,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENVBS);
+	usleep_range(10, 20);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_LDOEN,
+			   SUN8I_HDMI_PHY_ANA_CFG1_LDOEN);
+	udelay(5);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_CKEN,
+			   SUN8I_HDMI_PHY_ANA_CFG1_CKEN);
+	usleep_range(40, 100);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENRCAL,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENRCAL);
+	usleep_range(100, 200);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENCALOG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENCALOG);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS0 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS1 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS2,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS0 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS1 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS2);
+
+	/* wait for calibration to finish */
+	regmap_read_poll_timeout(phy->regs, SUN8I_HDMI_PHY_ANA_STS_REG, val,
+				 (val & SUN8I_HDMI_PHY_ANA_STS_RCALEND2D),
+				 100, 2000);
+
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDSCLK,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDSCLK);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS0 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS1 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS2 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDSCLK,
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS0 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS1 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS2 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDSCLK);
+
+	/* enable DDC communication */
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG3_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG3_SCLEN |
+			   SUN8I_HDMI_PHY_ANA_CFG3_SDAEN,
+			   SUN8I_HDMI_PHY_ANA_CFG3_SCLEN |
+			   SUN8I_HDMI_PHY_ANA_CFG3_SDAEN);
+
+	/* set HW control of CEC pins */
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_CEC_REG, 0);
+
+	/* read calibration data */
+	regmap_read(phy->regs, SUN8I_HDMI_PHY_ANA_STS_REG, &val);
+	phy->rcal = (val & SUN8I_HDMI_PHY_ANA_STS_RCAL_MASK) >> 2;
+}
+
 void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
 {
 	/* enable read access to HDMI controller */
@@ -155,7 +382,7 @@ static struct regmap_config sun8i_hdmi_phy_regmap_config = {
 	.reg_bits	= 32,
 	.val_bits	= 32,
 	.reg_stride	= 4,
-	.max_register	= SUN8I_HDMI_PHY_UNSCRAMBLE_REG,
+	.max_register	= SUN8I_HDMI_PHY_CEC_REG,
 	.name		= "phy"
 };
 
@@ -165,11 +392,22 @@ static const struct sun8i_hdmi_phy_variant sun8i_a83t_hdmi_phy = {
 	.phy_config = &sun8i_hdmi_phy_config_a83t,
 };
 
+static const struct sun8i_hdmi_phy_variant sun8i_h3_hdmi_phy = {
+	.has_phy_clk = true,
+	.phy_init = &sun8i_hdmi_phy_init_h3,
+	.phy_disable = &sun8i_hdmi_phy_disable_h3,
+	.phy_config = &sun8i_hdmi_phy_config_h3,
+};
+
 static const struct of_device_id sun8i_hdmi_phy_of_table[] = {
 	{
 		.compatible = "allwinner,sun8i-a83t-hdmi-phy",
 		.data = &sun8i_a83t_hdmi_phy,
 	},
+	{
+		.compatible = "allwinner,sun8i-h3-hdmi-phy",
+		.data = &sun8i_h3_hdmi_phy,
+	},
 	{ /* sentinel */ }
 };
 
@@ -226,11 +464,26 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 		goto err_put_clk_bus;
 	}
 
+	if (phy->variant->has_phy_clk) {
+		phy->clk_pll0 = of_clk_get_by_name(node, "pll-0");
+		if (IS_ERR(phy->clk_pll0)) {
+			dev_err(dev, "Could not get pll-0 clock\n");
+			ret = PTR_ERR(phy->clk_pll0);
+			goto err_put_clk_mod;
+		}
+
+		ret = sun8i_phy_clk_create(phy, dev);
+		if (ret) {
+			dev_err(dev, "Couldn't create the PHY clock\n");
+			goto err_put_clk_pll0;
+		}
+	}
+
 	phy->rst_phy = of_reset_control_get_shared(node, "phy");
 	if (IS_ERR(phy->rst_phy)) {
 		dev_err(dev, "Could not get phy reset control\n");
 		ret = PTR_ERR(phy->rst_phy);
-		goto err_put_clk_mod;
+		goto err_put_clk_pll0;
 	}
 
 	ret = reset_control_deassert(phy->rst_phy);
@@ -261,6 +514,9 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 	reset_control_assert(phy->rst_phy);
 err_put_rst_phy:
 	reset_control_put(phy->rst_phy);
+err_put_clk_pll0:
+	if (phy->variant->has_phy_clk)
+		clk_put(phy->clk_pll0);
 err_put_clk_mod:
 	clk_put(phy->clk_mod);
 err_put_clk_bus:
@@ -280,6 +536,8 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi)
 
 	reset_control_put(phy->rst_phy);
 
+	if (phy->variant->has_phy_clk)
+		clk_put(phy->clk_pll0);
 	clk_put(phy->clk_mod);
 	clk_put(phy->clk_bus);
 }
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c
new file mode 100644
index 000000000000..faea449812f8
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
+ */
+
+#include <linux/clk-provider.h>
+
+#include "sun8i_dw_hdmi.h"
+
+struct sun8i_phy_clk {
+	struct clk_hw		hw;
+	struct sun8i_hdmi_phy	*phy;
+};
+
+static inline struct sun8i_phy_clk *hw_to_phy_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct sun8i_phy_clk, hw);
+}
+
+static int sun8i_phy_clk_determine_rate(struct clk_hw *hw,
+					struct clk_rate_request *req)
+{
+	unsigned long rate = req->rate;
+	unsigned long best_rate = 0;
+	struct clk_hw *parent;
+	int best_div = 1;
+	int i;
+
+	parent = clk_hw_get_parent(hw);
+
+	for (i = 1; i <= 16; i++) {
+		unsigned long ideal = rate * i;
+		unsigned long rounded;
+
+		rounded = clk_hw_round_rate(parent, ideal);
+
+		if (rounded == ideal) {
+			best_rate = rounded;
+			best_div = i;
+			break;
+		}
+
+		if (!best_rate ||
+		    abs(rate - rounded / i) <
+		    abs(rate - best_rate / best_div)) {
+			best_rate = rounded;
+			best_div = i;
+		}
+	}
+
+	req->rate = best_rate / best_div;
+	req->best_parent_rate = best_rate;
+	req->best_parent_hw = parent;
+
+	return 0;
+}
+
+static unsigned long sun8i_phy_clk_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct sun8i_phy_clk *priv = hw_to_phy_clk(hw);
+	u32 reg;
+
+	regmap_read(priv->phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG, &reg);
+	reg = ((reg >> SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_SHIFT) &
+		SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK) + 1;
+
+	return parent_rate / reg;
+}
+
+static int sun8i_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long parent_rate)
+{
+	struct sun8i_phy_clk *priv = hw_to_phy_clk(hw);
+	unsigned long best_rate = 0;
+	u8 best_m = 0, m;
+
+	for (m = 1; m <= 16; m++) {
+		unsigned long tmp_rate = parent_rate / m;
+
+		if (tmp_rate > rate)
+			continue;
+
+		if (!best_rate ||
+		    (rate - tmp_rate) < (rate - best_rate)) {
+			best_rate = tmp_rate;
+			best_m = m;
+		}
+	}
+
+	regmap_update_bits(priv->phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG,
+			   SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK,
+			   SUN8I_HDMI_PHY_PLL_CFG2_PREDIV(best_m));
+
+	return 0;
+}
+
+static const struct clk_ops sun8i_phy_clk_ops = {
+	.determine_rate	= sun8i_phy_clk_determine_rate,
+	.recalc_rate	= sun8i_phy_clk_recalc_rate,
+	.set_rate	= sun8i_phy_clk_set_rate,
+};
+
+int sun8i_phy_clk_create(struct sun8i_hdmi_phy *phy, struct device *dev)
+{
+	struct clk_init_data init;
+	struct sun8i_phy_clk *priv;
+	const char *parents[1];
+
+	parents[0] = __clk_get_name(phy->clk_pll0);
+	if (!parents[0])
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	init.name = "hdmi-phy-clk";
+	init.ops = &sun8i_phy_clk_ops;
+	init.parent_names = parents;
+	init.num_parents = 1;
+	init.flags = CLK_SET_RATE_PARENT;
+
+	priv->phy = phy;
+	priv->hw.init = &init;
+
+	phy->clk_phy = devm_clk_register(dev, &priv->hw);
+	if (IS_ERR(phy->clk_phy))
+		return PTR_ERR(phy->clk_phy);
+
+	return 0;
+}
-- 
2.16.2

[PATCH v2 12/16] drm/sun4i: Add support for H3 HDMI PHY variant

[Jernej Skrabec]

While A83T HDMI PHY seems to be just customized Synopsys HDMI PHY, H3
HDMI PHY is completely custom PHY.

However, they still have many things in common like clock and reset
setup, setting sync polarity and more.

Add support for H3 HDMI PHY variant.

While documentation exists for this PHY variant, it doesn't go in great
details. Because of that, almost all settings are copied from BSP linux
4.4. Interestingly, those settings are slightly different to those found
in a older BSP with Linux 3.4. For now, no user visible difference was
found between them.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/Makefile             |   1 +
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h      |   6 +
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c     | 264 ++++++++++++++++++++++++++++-
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c | 132 +++++++++++++++
 4 files changed, 400 insertions(+), 3 deletions(-)
 create mode 100644 drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c

diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
index 1610e748119b..330843ce4280 100644
--- a/drivers/gpu/drm/sun4i/Makefile
+++ b/drivers/gpu/drm/sun4i/Makefile
@@ -12,6 +12,7 @@ sun4i-drm-hdmi-y		+= sun4i_hdmi_tmds_clk.o
 
 sun8i-drm-hdmi-y		+= sun8i_dw_hdmi.o
 sun8i-drm-hdmi-y		+= sun8i_hdmi_phy.o
+sun8i-drm-hdmi-y		+= sun8i_hdmi_phy_clk.o
 
 sun8i-mixer-y			+= sun8i_mixer.o sun8i_ui_layer.o \
 				   sun8i_vi_layer.o sun8i_ui_scaler.o \
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index 49161326ea5a..79154f0f674a 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -146,6 +146,7 @@
 struct sun8i_hdmi_phy;
 
 struct sun8i_hdmi_phy_variant {
+	bool has_phy_clk;
 	void (*phy_init)(struct sun8i_hdmi_phy *phy);
 	void (*phy_disable)(struct dw_hdmi *hdmi,
 			    struct sun8i_hdmi_phy *phy);
@@ -157,6 +158,9 @@ struct sun8i_hdmi_phy_variant {
 struct sun8i_hdmi_phy {
 	struct clk			*clk_bus;
 	struct clk			*clk_mod;
+	struct clk			*clk_phy;
+	struct clk			*clk_pll0;
+	unsigned int			rcal;
 	struct regmap			*regs;
 	struct reset_control		*rst_phy;
 	struct sun8i_hdmi_phy_variant	*variant;
@@ -184,4 +188,6 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi);
 void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy);
 const struct dw_hdmi_phy_ops *sun8i_hdmi_phy_get_ops(void);
 
+int sun8i_phy_clk_create(struct sun8i_hdmi_phy *phy, struct device *dev);
+
 #endif /* _SUN8I_DW_HDMI_H_ */
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 16889bc0c62d..5a52fc489a9d 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2018 Jernej Skrabec <jernej.skrabec@siol.net>
  */
 
+#include <linux/delay.h>
 #include <linux/of_address.h>
 
 #include "sun8i_dw_hdmi.h"
@@ -73,7 +74,148 @@ static int sun8i_hdmi_phy_config_a83t(struct dw_hdmi *hdmi,
 	dw_hdmi_phy_gen2_txpwron(hdmi, 1);
 
 	return 0;
-};
+}
+
+static int sun8i_hdmi_phy_config_h3(struct dw_hdmi *hdmi,
+				    struct sun8i_hdmi_phy *phy,
+				    unsigned int clk_rate)
+{
+	u32 pll_cfg1_init;
+	u32 pll_cfg2_init;
+	u32 ana_cfg1_end;
+	u32 ana_cfg2_init;
+	u32 ana_cfg3_init;
+	u32 b_offset = 0;
+	u32 val;
+
+	/* bandwidth / frequency independent settings */
+
+	pll_cfg1_init = SUN8I_HDMI_PHY_PLL_CFG1_LDO2_EN |
+			SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN |
+			SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(7) |
+			SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(1) |
+			SUN8I_HDMI_PHY_PLL_CFG1_PLLDBEN |
+			SUN8I_HDMI_PHY_PLL_CFG1_CS |
+			SUN8I_HDMI_PHY_PLL_CFG1_CP_S(2) |
+			SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(63) |
+			SUN8I_HDMI_PHY_PLL_CFG1_BWS;
+
+	pll_cfg2_init = SUN8I_HDMI_PHY_PLL_CFG2_SV_H |
+			SUN8I_HDMI_PHY_PLL_CFG2_VCOGAIN_EN |
+			SUN8I_HDMI_PHY_PLL_CFG2_SDIV2;
+
+	ana_cfg1_end = SUN8I_HDMI_PHY_ANA_CFG1_REG_SVBH(1) |
+		       SUN8I_HDMI_PHY_ANA_CFG1_AMP_OPT |
+		       SUN8I_HDMI_PHY_ANA_CFG1_EMP_OPT |
+		       SUN8I_HDMI_PHY_ANA_CFG1_AMPCK_OPT |
+		       SUN8I_HDMI_PHY_ANA_CFG1_EMPCK_OPT |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENRCAL |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENCALOG |
+		       SUN8I_HDMI_PHY_ANA_CFG1_REG_SCKTMDS |
+		       SUN8I_HDMI_PHY_ANA_CFG1_TMDSCLK_EN |
+		       SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK |
+		       SUN8I_HDMI_PHY_ANA_CFG1_TXEN_ALL |
+		       SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDSCLK |
+		       SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS2 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS1 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS0 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS2 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS1 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS0 |
+		       SUN8I_HDMI_PHY_ANA_CFG1_CKEN |
+		       SUN8I_HDMI_PHY_ANA_CFG1_LDOEN |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENVBS |
+		       SUN8I_HDMI_PHY_ANA_CFG1_ENBI;
+
+	ana_cfg2_init = SUN8I_HDMI_PHY_ANA_CFG2_M_EN |
+			SUN8I_HDMI_PHY_ANA_CFG2_REG_DENCK |
+			SUN8I_HDMI_PHY_ANA_CFG2_REG_DEN |
+			SUN8I_HDMI_PHY_ANA_CFG2_REG_CKSS(1) |
+			SUN8I_HDMI_PHY_ANA_CFG2_REG_CSMPS(1);
+
+	ana_cfg3_init = SUN8I_HDMI_PHY_ANA_CFG3_REG_WIRE(0x3e0) |
+			SUN8I_HDMI_PHY_ANA_CFG3_SDAEN |
+			SUN8I_HDMI_PHY_ANA_CFG3_SCLEN;
+
+	/* bandwidth / frequency dependent settings */
+	if (clk_rate <= 27000000) {
+		pll_cfg1_init |= SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 |
+				 SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(32);
+		pll_cfg2_init |= SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(4) |
+				 SUN8I_HDMI_PHY_PLL_CFG2_S(4);
+		ana_cfg1_end |= SUN8I_HDMI_PHY_ANA_CFG1_REG_CALSW;
+		ana_cfg2_init |= SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(4) |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_RESDI(phy->rcal);
+		ana_cfg3_init |= SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(3) |
+				 SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(5);
+	} else if (clk_rate <= 74250000) {
+		pll_cfg1_init |= SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 |
+				 SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(32);
+		pll_cfg2_init |= SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(4) |
+				 SUN8I_HDMI_PHY_PLL_CFG2_S(5);
+		ana_cfg1_end |= SUN8I_HDMI_PHY_ANA_CFG1_REG_CALSW;
+		ana_cfg2_init |= SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(4) |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_RESDI(phy->rcal);
+		ana_cfg3_init |= SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(5) |
+				 SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(7);
+	} else if (clk_rate <= 148500000) {
+		pll_cfg1_init |= SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 |
+				 SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(32);
+		pll_cfg2_init |= SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(4) |
+				 SUN8I_HDMI_PHY_PLL_CFG2_S(6);
+		ana_cfg2_init |= SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSWCK |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSW |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(2);
+		ana_cfg3_init |= SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(7) |
+				 SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(9);
+	} else {
+		b_offset = 2;
+		pll_cfg1_init |= SUN8I_HDMI_PHY_PLL_CFG1_CNT_INT(63);
+		pll_cfg2_init |= SUN8I_HDMI_PHY_PLL_CFG2_VCO_S(6) |
+				 SUN8I_HDMI_PHY_PLL_CFG2_S(7);
+		ana_cfg2_init |= SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSWCK |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_BIGSW |
+				 SUN8I_HDMI_PHY_ANA_CFG2_REG_SLV(4);
+		ana_cfg3_init |= SUN8I_HDMI_PHY_ANA_CFG3_REG_AMPCK(9) |
+				 SUN8I_HDMI_PHY_ANA_CFG3_REG_AMP(13);
+	}
+
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK, 0);
+
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, pll_cfg1_init);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG,
+			   (u32)~SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK,
+			   pll_cfg2_init);
+	usleep_range(10000, 15000);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG3_REG,
+		     SUN8I_HDMI_PHY_PLL_CFG3_SOUT_DIV2);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
+			   SUN8I_HDMI_PHY_PLL_CFG1_PLLEN,
+			   SUN8I_HDMI_PHY_PLL_CFG1_PLLEN);
+	msleep(100);
+
+	/* get B value */
+	regmap_read(phy->regs, SUN8I_HDMI_PHY_ANA_STS_REG, &val);
+	val = (val & SUN8I_HDMI_PHY_ANA_STS_B_OUT_MSK) >>
+		SUN8I_HDMI_PHY_ANA_STS_B_OUT_SHIFT;
+	val = min(val + b_offset, (u32)0x3f);
+
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
+			   SUN8I_HDMI_PHY_PLL_CFG1_REG_OD1 |
+			   SUN8I_HDMI_PHY_PLL_CFG1_REG_OD,
+			   SUN8I_HDMI_PHY_PLL_CFG1_REG_OD1 |
+			   SUN8I_HDMI_PHY_PLL_CFG1_REG_OD);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
+			   SUN8I_HDMI_PHY_PLL_CFG1_B_IN_MSK,
+			   val << SUN8I_HDMI_PHY_PLL_CFG1_B_IN_SHIFT);
+	msleep(100);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG, ana_cfg1_end);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG2_REG, ana_cfg2_init);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG3_REG, ana_cfg3_init);
+
+	return 0;
+}
 
 static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 				 struct drm_display_mode *mode)
@@ -90,6 +232,9 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
 			   SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
 
+	if (phy->variant->has_phy_clk)
+		clk_set_rate(phy->clk_phy, mode->crtc_clock * 1000);
+
 	return phy->variant->phy_config(hdmi, phy, mode->crtc_clock * 1000);
 };
 
@@ -103,6 +248,16 @@ static void sun8i_hdmi_phy_disable_a83t(struct dw_hdmi *hdmi,
 			   SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN, 0);
 }
 
+static void sun8i_hdmi_phy_disable_h3(struct dw_hdmi *hdmi,
+				      struct sun8i_hdmi_phy *phy)
+{
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+		     SUN8I_HDMI_PHY_ANA_CFG1_LDOEN |
+		     SUN8I_HDMI_PHY_ANA_CFG1_ENVBS |
+		     SUN8I_HDMI_PHY_ANA_CFG1_ENBI);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, 0);
+}
+
 static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
 {
 	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
@@ -133,6 +288,78 @@ static void sun8i_hdmi_phy_init_a83t(struct sun8i_hdmi_phy *phy)
 			   SUN8I_HDMI_PHY_DBG_CTRL_ADDR(I2C_ADDR));
 }
 
+static void sun8i_hdmi_phy_init_h3(struct sun8i_hdmi_phy *phy)
+{
+	unsigned int val;
+
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG, 0);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENBI,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENBI);
+	udelay(5);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_TMDSCLK_EN,
+			   SUN8I_HDMI_PHY_ANA_CFG1_TMDSCLK_EN);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENVBS,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENVBS);
+	usleep_range(10, 20);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_LDOEN,
+			   SUN8I_HDMI_PHY_ANA_CFG1_LDOEN);
+	udelay(5);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_CKEN,
+			   SUN8I_HDMI_PHY_ANA_CFG1_CKEN);
+	usleep_range(40, 100);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENRCAL,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENRCAL);
+	usleep_range(100, 200);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENCALOG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENCALOG);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS0 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS1 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS2,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS0 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS1 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDS2);
+
+	/* wait for calibration to finish */
+	regmap_read_poll_timeout(phy->regs, SUN8I_HDMI_PHY_ANA_STS_REG, val,
+				 (val & SUN8I_HDMI_PHY_ANA_STS_RCALEND2D),
+				 100, 2000);
+
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDSCLK,
+			   SUN8I_HDMI_PHY_ANA_CFG1_ENP2S_TMDSCLK);
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS0 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS1 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS2 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDSCLK,
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS0 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS1 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDS2 |
+			   SUN8I_HDMI_PHY_ANA_CFG1_BIASEN_TMDSCLK);
+
+	/* enable DDC communication */
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG3_REG,
+			   SUN8I_HDMI_PHY_ANA_CFG3_SCLEN |
+			   SUN8I_HDMI_PHY_ANA_CFG3_SDAEN,
+			   SUN8I_HDMI_PHY_ANA_CFG3_SCLEN |
+			   SUN8I_HDMI_PHY_ANA_CFG3_SDAEN);
+
+	/* set HW control of CEC pins */
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_CEC_REG, 0);
+
+	/* read calibration data */
+	regmap_read(phy->regs, SUN8I_HDMI_PHY_ANA_STS_REG, &val);
+	phy->rcal = (val & SUN8I_HDMI_PHY_ANA_STS_RCAL_MASK) >> 2;
+}
+
 void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
 {
 	/* enable read access to HDMI controller */
@@ -155,7 +382,7 @@ static struct regmap_config sun8i_hdmi_phy_regmap_config = {
 	.reg_bits	= 32,
 	.val_bits	= 32,
 	.reg_stride	= 4,
-	.max_register	= SUN8I_HDMI_PHY_UNSCRAMBLE_REG,
+	.max_register	= SUN8I_HDMI_PHY_CEC_REG,
 	.name		= "phy"
 };
 
@@ -165,11 +392,22 @@ static const struct sun8i_hdmi_phy_variant sun8i_a83t_hdmi_phy = {
 	.phy_config = &sun8i_hdmi_phy_config_a83t,
 };
 
+static const struct sun8i_hdmi_phy_variant sun8i_h3_hdmi_phy = {
+	.has_phy_clk = true,
+	.phy_init = &sun8i_hdmi_phy_init_h3,
+	.phy_disable = &sun8i_hdmi_phy_disable_h3,
+	.phy_config = &sun8i_hdmi_phy_config_h3,
+};
+
 static const struct of_device_id sun8i_hdmi_phy_of_table[] = {
 	{
 		.compatible = "allwinner,sun8i-a83t-hdmi-phy",
 		.data = &sun8i_a83t_hdmi_phy,
 	},
+	{
+		.compatible = "allwinner,sun8i-h3-hdmi-phy",
+		.data = &sun8i_h3_hdmi_phy,
+	},
 	{ /* sentinel */ }
 };
 
@@ -226,11 +464,26 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 		goto err_put_clk_bus;
 	}
 
+	if (phy->variant->has_phy_clk) {
+		phy->clk_pll0 = of_clk_get_by_name(node, "pll-0");
+		if (IS_ERR(phy->clk_pll0)) {
+			dev_err(dev, "Could not get pll-0 clock\n");
+			ret = PTR_ERR(phy->clk_pll0);
+			goto err_put_clk_mod;
+		}
+
+		ret = sun8i_phy_clk_create(phy, dev);
+		if (ret) {
+			dev_err(dev, "Couldn't create the PHY clock\n");
+			goto err_put_clk_pll0;
+		}
+	}
+
 	phy->rst_phy = of_reset_control_get_shared(node, "phy");
 	if (IS_ERR(phy->rst_phy)) {
 		dev_err(dev, "Could not get phy reset control\n");
 		ret = PTR_ERR(phy->rst_phy);
-		goto err_put_clk_mod;
+		goto err_put_clk_pll0;
 	}
 
 	ret = reset_control_deassert(phy->rst_phy);
@@ -261,6 +514,9 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 	reset_control_assert(phy->rst_phy);
 err_put_rst_phy:
 	reset_control_put(phy->rst_phy);
+err_put_clk_pll0:
+	if (phy->variant->has_phy_clk)
+		clk_put(phy->clk_pll0);
 err_put_clk_mod:
 	clk_put(phy->clk_mod);
 err_put_clk_bus:
@@ -280,6 +536,8 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi)
 
 	reset_control_put(phy->rst_phy);
 
+	if (phy->variant->has_phy_clk)
+		clk_put(phy->clk_pll0);
 	clk_put(phy->clk_mod);
 	clk_put(phy->clk_bus);
 }
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c
new file mode 100644
index 000000000000..faea449812f8
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy_clk.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jernej Skrabec <jernej.skrabec@siol.net>
+ */
+
+#include <linux/clk-provider.h>
+
+#include "sun8i_dw_hdmi.h"
+
+struct sun8i_phy_clk {
+	struct clk_hw		hw;
+	struct sun8i_hdmi_phy	*phy;
+};
+
+static inline struct sun8i_phy_clk *hw_to_phy_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct sun8i_phy_clk, hw);
+}
+
+static int sun8i_phy_clk_determine_rate(struct clk_hw *hw,
+					struct clk_rate_request *req)
+{
+	unsigned long rate = req->rate;
+	unsigned long best_rate = 0;
+	struct clk_hw *parent;
+	int best_div = 1;
+	int i;
+
+	parent = clk_hw_get_parent(hw);
+
+	for (i = 1; i <= 16; i++) {
+		unsigned long ideal = rate * i;
+		unsigned long rounded;
+
+		rounded = clk_hw_round_rate(parent, ideal);
+
+		if (rounded == ideal) {
+			best_rate = rounded;
+			best_div = i;
+			break;
+		}
+
+		if (!best_rate ||
+		    abs(rate - rounded / i) <
+		    abs(rate - best_rate / best_div)) {
+			best_rate = rounded;
+			best_div = i;
+		}
+	}
+
+	req->rate = best_rate / best_div;
+	req->best_parent_rate = best_rate;
+	req->best_parent_hw = parent;
+
+	return 0;
+}
+
+static unsigned long sun8i_phy_clk_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct sun8i_phy_clk *priv = hw_to_phy_clk(hw);
+	u32 reg;
+
+	regmap_read(priv->phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG, &reg);
+	reg = ((reg >> SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_SHIFT) &
+		SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK) + 1;
+
+	return parent_rate / reg;
+}
+
+static int sun8i_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long parent_rate)
+{
+	struct sun8i_phy_clk *priv = hw_to_phy_clk(hw);
+	unsigned long best_rate = 0;
+	u8 best_m = 0, m;
+
+	for (m = 1; m <= 16; m++) {
+		unsigned long tmp_rate = parent_rate / m;
+
+		if (tmp_rate > rate)
+			continue;
+
+		if (!best_rate ||
+		    (rate - tmp_rate) < (rate - best_rate)) {
+			best_rate = tmp_rate;
+			best_m = m;
+		}
+	}
+
+	regmap_update_bits(priv->phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG,
+			   SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK,
+			   SUN8I_HDMI_PHY_PLL_CFG2_PREDIV(best_m));
+
+	return 0;
+}
+
+static const struct clk_ops sun8i_phy_clk_ops = {
+	.determine_rate	= sun8i_phy_clk_determine_rate,
+	.recalc_rate	= sun8i_phy_clk_recalc_rate,
+	.set_rate	= sun8i_phy_clk_set_rate,
+};
+
+int sun8i_phy_clk_create(struct sun8i_hdmi_phy *phy, struct device *dev)
+{
+	struct clk_init_data init;
+	struct sun8i_phy_clk *priv;
+	const char *parents[1];
+
+	parents[0] = __clk_get_name(phy->clk_pll0);
+	if (!parents[0])
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	init.name = "hdmi-phy-clk";
+	init.ops = &sun8i_phy_clk_ops;
+	init.parent_names = parents;
+	init.num_parents = 1;
+	init.flags = CLK_SET_RATE_PARENT;
+
+	priv->phy = phy;
+	priv->hw.init = &init;
+
+	phy->clk_phy = devm_clk_register(dev, &priv->hw);
+	if (IS_ERR(phy->clk_phy))
+		return PTR_ERR(phy->clk_phy);
+
+	return 0;
+}
-- 
2.16.2

[PATCH v2 13/16] drm/sun4i: Allow building on arm64

[Jernej Skrabec]

64-bit ARM SoCs from Allwinner have DE2/TCON/HDMI periphery which
is compatible to 32-bit SoCs, so allow building DRM driver for
arm64 architecture.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig
index 7327da3bc94f..eee6bc0eaf97 100644
--- a/drivers/gpu/drm/sun4i/Kconfig
+++ b/drivers/gpu/drm/sun4i/Kconfig
@@ -1,6 +1,6 @@
 config DRM_SUN4I
 	tristate "DRM Support for Allwinner A10 Display Engine"
-	depends on DRM && ARM && COMMON_CLK
+	depends on DRM && (ARM || ARM64) && COMMON_CLK
 	depends on ARCH_SUNXI || COMPILE_TEST
 	select DRM_GEM_CMA_HELPER
 	select DRM_KMS_HELPER
-- 
2.16.2

[PATCH v2 13/16] drm/sun4i: Allow building on arm64

[Jernej Skrabec]

64-bit ARM SoCs from Allwinner have DE2/TCON/HDMI periphery which
is compatible to 32-bit SoCs, so allow building DRM driver for
arm64 architecture.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 drivers/gpu/drm/sun4i/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig
index 7327da3bc94f..eee6bc0eaf97 100644
--- a/drivers/gpu/drm/sun4i/Kconfig
+++ b/drivers/gpu/drm/sun4i/Kconfig
@@ -1,6 +1,6 @@
 config DRM_SUN4I
 	tristate "DRM Support for Allwinner A10 Display Engine"
-	depends on DRM && ARM && COMMON_CLK
+	depends on DRM && (ARM || ARM64) && COMMON_CLK
 	depends on ARCH_SUNXI || COMPILE_TEST
 	select DRM_GEM_CMA_HELPER
 	select DRM_KMS_HELPER
-- 
2.16.2

[PATCH v2 13/16] drm/sun4i: Allow building on arm64

[Jernej Skrabec]

64-bit ARM SoCs from Allwinner have DE2/TCON/HDMI periphery which
is compatible to 32-bit SoCs, so allow building DRM driver for
arm64 architecture.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/gpu/drm/sun4i/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig
index 7327da3bc94f..eee6bc0eaf97 100644
--- a/drivers/gpu/drm/sun4i/Kconfig
+++ b/drivers/gpu/drm/sun4i/Kconfig
@@ -1,6 +1,6 @@
 config DRM_SUN4I
 	tristate "DRM Support for Allwinner A10 Display Engine"
-	depends on DRM && ARM && COMMON_CLK
+	depends on DRM && (ARM || ARM64) && COMMON_CLK
 	depends on ARCH_SUNXI || COMPILE_TEST
 	select DRM_GEM_CMA_HELPER
 	select DRM_KMS_HELPER
-- 
2.16.2

[PATCH v2 14/16] ARM: dts: sunxi: h3/h5: Add HDMI pipeline

[Jernej Skrabec]

This commit adds all entries needed for HDMI to function properly.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 108 +++++++++++++++++++++++++++++++++++++
 1 file changed, 108 insertions(+)

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 7741166d34d8..1be1a02d6df2 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -105,6 +105,12 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun8i-h3-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -123,6 +129,29 @@
 			#reset-cells = <1>;
 		};
 
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-h3-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
 		syscon: syscon@1c00000 {
 			compatible = "allwinner,sun8i-h3-system-controller",
 				"syscon";
@@ -138,6 +167,41 @@
 			#dma-cells = <1>;
 		};
 
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-h3-tcon-tv",
+				     "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+					};
+				};
+			};
+		};
+
 		mmc0: mmc@1c0f000 {
 			/* compatible and clocks are in per SoC .dtsi file */
 			reg = <0x01c0f000 0x1000>;
@@ -682,6 +746,50 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-h3-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi-phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-h3-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu 6>;
+			clock-names = "bus", "mod", "pll-0";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
 		rtc: rtc@1f00000 {
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
-- 
2.16.2

[PATCH v2 14/16] ARM: dts: sunxi: h3/h5: Add HDMI pipeline

[Jernej Skrabec]

This commit adds all entries needed for HDMI to function properly.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 108 +++++++++++++++++++++++++++++++++++++
 1 file changed, 108 insertions(+)

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 7741166d34d8..1be1a02d6df2 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -105,6 +105,12 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun8i-h3-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -123,6 +129,29 @@
 			#reset-cells = <1>;
 		};
 
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-h3-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
 		syscon: syscon@1c00000 {
 			compatible = "allwinner,sun8i-h3-system-controller",
 				"syscon";
@@ -138,6 +167,41 @@
 			#dma-cells = <1>;
 		};
 
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-h3-tcon-tv",
+				     "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+					};
+				};
+			};
+		};
+
 		mmc0: mmc@1c0f000 {
 			/* compatible and clocks are in per SoC .dtsi file */
 			reg = <0x01c0f000 0x1000>;
@@ -682,6 +746,50 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-h3-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi-phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-h3-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu 6>;
+			clock-names = "bus", "mod", "pll-0";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
 		rtc: rtc@1f00000 {
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
-- 
2.16.2

[PATCH v2 14/16] ARM: dts: sunxi: h3/h5: Add HDMI pipeline

[Jernej Skrabec]

This commit adds all entries needed for HDMI to function properly.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 108 +++++++++++++++++++++++++++++++++++++
 1 file changed, 108 insertions(+)

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 7741166d34d8..1be1a02d6df2 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -105,6 +105,12 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun8i-h3-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -123,6 +129,29 @@
 			#reset-cells = <1>;
 		};
 
+		mixer0: mixer at 1100000 {
+			compatible = "allwinner,sun8i-h3-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port at 1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
 		syscon: syscon at 1c00000 {
 			compatible = "allwinner,sun8i-h3-system-controller",
 				"syscon";
@@ -138,6 +167,41 @@
 			#dma-cells = <1>;
 		};
 
+		tcon0: lcd-controller at 1c0c000 {
+			compatible = "allwinner,sun8i-h3-tcon-tv",
+				     "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port at 0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port at 1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint at 1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+					};
+				};
+			};
+		};
+
 		mmc0: mmc at 1c0f000 {
 			/* compatible and clocks are in per SoC .dtsi file */
 			reg = <0x01c0f000 0x1000>;
@@ -682,6 +746,50 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		hdmi: hdmi at 1ee0000 {
+			compatible = "allwinner,sun8i-h3-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi-phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port at 0 {
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port at 1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy at 1ef0000 {
+			compatible = "allwinner,sun8i-h3-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu 6>;
+			clock-names = "bus", "mod", "pll-0";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
 		rtc: rtc at 1f00000 {
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
-- 
2.16.2

[PATCH v2 15/16] ARM: dts: sun8i: h3: Enable HDMI output on H3 boards

[Jernej Skrabec]

Enable HDMI output on all boards which have HDMI connector.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts    | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts          | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts           | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-2.dts          | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts       | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-one.dts        | 24 +++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts         | 25 ++++++++++++++++++++++
 8 files changed, 199 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index 9c1bc472fb1c..30540dc8e0c5 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -61,6 +61,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -100,6 +111,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -129,6 +144,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index 870aabcbb2d8..cf1f970b0c6f 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -61,6 +61,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -100,6 +111,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -108,6 +123,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
index d0d41eb86cb4..b20a710da7bc 100644
--- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
@@ -23,6 +23,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -120,6 +131,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -143,6 +158,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
index c77fbca4f227..9412668bb888 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
@@ -49,6 +49,21 @@
 	aliases {
 		ethernet0 = &emac;
 	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci1 {
@@ -66,6 +81,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index 7569bd05e249..f1fc6bdca8be 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -62,6 +62,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -114,6 +125,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -125,6 +140,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
index 2e59fd296717..476ae8e387ca 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
@@ -61,6 +61,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -91,6 +102,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -99,6 +114,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index c1a8cd93c463..3328fe583c9b 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -60,6 +60,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -90,6 +101,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -102,9 +117,18 @@
 	phy-handle = <&int_mii_phy>;
 	phy-mode = "mii";
 	allwinner,leds-active-low;
+};
+
+&hdmi {
 	status = "okay";
 };
 
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index 537227b85935..cea4d647ecbf 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -60,6 +60,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -98,6 +109,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -121,6 +136,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
-- 
2.16.2

[PATCH v2 15/16] ARM: dts: sun8i: h3: Enable HDMI output on H3 boards

[Jernej Skrabec]

Enable HDMI output on all boards which have HDMI connector.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts    | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts          | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts           | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-2.dts          | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts       | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-one.dts        | 24 +++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts         | 25 ++++++++++++++++++++++
 8 files changed, 199 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index 9c1bc472fb1c..30540dc8e0c5 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -61,6 +61,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -100,6 +111,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -129,6 +144,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index 870aabcbb2d8..cf1f970b0c6f 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -61,6 +61,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -100,6 +111,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -108,6 +123,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
index d0d41eb86cb4..b20a710da7bc 100644
--- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
@@ -23,6 +23,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -120,6 +131,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -143,6 +158,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
index c77fbca4f227..9412668bb888 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
@@ -49,6 +49,21 @@
 	aliases {
 		ethernet0 = &emac;
 	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci1 {
@@ -66,6 +81,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index 7569bd05e249..f1fc6bdca8be 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -62,6 +62,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -114,6 +125,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -125,6 +140,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
index 2e59fd296717..476ae8e387ca 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
@@ -61,6 +61,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -91,6 +102,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -99,6 +114,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index c1a8cd93c463..3328fe583c9b 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -60,6 +60,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -90,6 +101,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -102,9 +117,18 @@
 	phy-handle = <&int_mii_phy>;
 	phy-mode = "mii";
 	allwinner,leds-active-low;
+};
+
+&hdmi {
 	status = "okay";
 };
 
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index 537227b85935..cea4d647ecbf 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -60,6 +60,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -98,6 +109,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -121,6 +136,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
-- 
2.16.2

[PATCH v2 15/16] ARM: dts: sun8i: h3: Enable HDMI output on H3 boards

[Jernej Skrabec]

Enable HDMI output on all boards which have HDMI connector.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts    | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts          | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts           | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-2.dts          | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts       | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-one.dts        | 24 +++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts         | 25 ++++++++++++++++++++++
 8 files changed, 199 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index 9c1bc472fb1c..30540dc8e0c5 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -61,6 +61,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -100,6 +111,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -129,6 +144,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index 870aabcbb2d8..cf1f970b0c6f 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -61,6 +61,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -100,6 +111,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -108,6 +123,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
index d0d41eb86cb4..b20a710da7bc 100644
--- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
@@ -23,6 +23,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -120,6 +131,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -143,6 +158,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
index c77fbca4f227..9412668bb888 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
@@ -49,6 +49,21 @@
 	aliases {
 		ethernet0 = &emac;
 	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci1 {
@@ -66,6 +81,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index 7569bd05e249..f1fc6bdca8be 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -62,6 +62,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -114,6 +125,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -125,6 +140,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
index 2e59fd296717..476ae8e387ca 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
@@ -61,6 +61,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -91,6 +102,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -99,6 +114,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index c1a8cd93c463..3328fe583c9b 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -60,6 +60,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -90,6 +101,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -102,9 +117,18 @@
 	phy-handle = <&int_mii_phy>;
 	phy-mode = "mii";
 	allwinner,leds-active-low;
+};
+
+&hdmi {
 	status = "okay";
 };
 
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index 537227b85935..cea4d647ecbf 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -60,6 +60,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -98,6 +109,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -121,6 +136,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
-- 
2.16.2

[PATCH v2 16/16] ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards

[Jernej Skrabec]

Enable HDMI output on all boards with HDMI connector.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 .../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts  | 25 ++++++++++++++++++++++
 .../dts/allwinner/sun50i-h5-orangepi-prime.dts     | 25 ++++++++++++++++++++++
 .../allwinner/sun50i-h5-orangepi-zero-plus2.dts    | 25 ++++++++++++++++++++++
 3 files changed, 75 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index 58505fbc2667..98862c7c7258 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -67,6 +67,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -121,6 +132,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -153,6 +168,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index 803566608ed8..b75ca4d7d001 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -62,6 +62,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -128,6 +139,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -160,6 +175,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index eda24d813282..53c8c11620e0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -58,6 +58,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	reg_vcc3v3: vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3";
@@ -73,6 +84,20 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-- 
2.16.2

[PATCH v2 16/16] ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards

[Jernej Skrabec]

Enable HDMI output on all boards with HDMI connector.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 .../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts  | 25 ++++++++++++++++++++++
 .../dts/allwinner/sun50i-h5-orangepi-prime.dts     | 25 ++++++++++++++++++++++
 .../allwinner/sun50i-h5-orangepi-zero-plus2.dts    | 25 ++++++++++++++++++++++
 3 files changed, 75 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index 58505fbc2667..98862c7c7258 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -67,6 +67,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -121,6 +132,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -153,6 +168,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index 803566608ed8..b75ca4d7d001 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -62,6 +62,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -128,6 +139,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -160,6 +175,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index eda24d813282..53c8c11620e0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -58,6 +58,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	reg_vcc3v3: vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3";
@@ -73,6 +84,20 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-- 
2.16.2

[PATCH v2 16/16] ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards

[Jernej Skrabec]

Enable HDMI output on all boards with HDMI connector.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 .../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts  | 25 ++++++++++++++++++++++
 .../dts/allwinner/sun50i-h5-orangepi-prime.dts     | 25 ++++++++++++++++++++++
 .../allwinner/sun50i-h5-orangepi-zero-plus2.dts    | 25 ++++++++++++++++++++++
 3 files changed, 75 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index 58505fbc2667..98862c7c7258 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -67,6 +67,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -121,6 +132,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -153,6 +168,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index 803566608ed8..b75ca4d7d001 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -62,6 +62,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -128,6 +139,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -160,6 +175,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index eda24d813282..53c8c11620e0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -58,6 +58,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	reg_vcc3v3: vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3";
@@ -73,6 +84,20 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-- 
2.16.2

Re: [PATCH v2 01/16] clk: sunxi-ng: Add check for minimal rate to NM PLLs

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 2344 bytes --]

Hi,

On Tue, Feb 27, 2018 at 11:26:46PM +0100, Jernej Skrabec wrote:
> Some NM PLLs doesn't work well when their output clock rate is set below
> certain rate.
> 
> Add support for that constrain.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
>  drivers/clk/sunxi-ng/ccu_nm.c | 11 +++++++----
>  drivers/clk/sunxi-ng/ccu_nm.h | 27 +++++++++++++++++++++++++++
>  2 files changed, 34 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
> index a16de092bf94..7fc743c78c1b 100644
> --- a/drivers/clk/sunxi-ng/ccu_nm.c
> +++ b/drivers/clk/sunxi-ng/ccu_nm.c
> @@ -20,7 +20,7 @@ struct _ccu_nm {
>  };
>  
>  static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
> -			     struct _ccu_nm *nm)
> +			     unsigned long min_rate, struct _ccu_nm *nm)
>  {
>  	unsigned long best_rate = 0;
>  	unsigned long best_n = 0, best_m = 0;
> @@ -30,7 +30,7 @@ static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
>  		for (_m = nm->min_m; _m <= nm->max_m; _m++) {
>  			unsigned long tmp_rate = parent * _n  / _m;
>  
> -			if (tmp_rate > rate)
> +			if (tmp_rate > rate || tmp_rate < min_rate)
>  				continue;
>  
>  			if ((rate - tmp_rate) < (rate - best_rate)) {
> @@ -117,6 +117,9 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
>  	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
>  		rate *= nm->fixed_post_div;
>  
> +	if (rate < nm->min_rate)
> +		rate = nm->min_rate;
> +

I guess you can just return there. There's no point in trying to find
the factors at this point, since the minimum should be a value that
can be reached.

>  	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
>  		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
>  			rate /= nm->fixed_post_div;
> @@ -134,7 +137,7 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
>  	_nm.min_m = 1;
>  	_nm.max_m = nm->m.max ?: 1 << nm->m.width;
>  
> -	ccu_nm_find_best(*parent_rate, rate, &_nm);
> +	ccu_nm_find_best(*parent_rate, rate, nm->min_rate, &_nm);

Therefore, you don't need to change the prototype there either.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 01/16] clk: sunxi-ng: Add check for minimal rate to NM PLLs

[Maxime Ripard]

[-- Attachment #1.1: Type: text/plain, Size: 2344 bytes --]

Hi,

On Tue, Feb 27, 2018 at 11:26:46PM +0100, Jernej Skrabec wrote:
> Some NM PLLs doesn't work well when their output clock rate is set below
> certain rate.
> 
> Add support for that constrain.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
>  drivers/clk/sunxi-ng/ccu_nm.c | 11 +++++++----
>  drivers/clk/sunxi-ng/ccu_nm.h | 27 +++++++++++++++++++++++++++
>  2 files changed, 34 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
> index a16de092bf94..7fc743c78c1b 100644
> --- a/drivers/clk/sunxi-ng/ccu_nm.c
> +++ b/drivers/clk/sunxi-ng/ccu_nm.c
> @@ -20,7 +20,7 @@ struct _ccu_nm {
>  };
>  
>  static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
> -			     struct _ccu_nm *nm)
> +			     unsigned long min_rate, struct _ccu_nm *nm)
>  {
>  	unsigned long best_rate = 0;
>  	unsigned long best_n = 0, best_m = 0;
> @@ -30,7 +30,7 @@ static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
>  		for (_m = nm->min_m; _m <= nm->max_m; _m++) {
>  			unsigned long tmp_rate = parent * _n  / _m;
>  
> -			if (tmp_rate > rate)
> +			if (tmp_rate > rate || tmp_rate < min_rate)
>  				continue;
>  
>  			if ((rate - tmp_rate) < (rate - best_rate)) {
> @@ -117,6 +117,9 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
>  	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
>  		rate *= nm->fixed_post_div;
>  
> +	if (rate < nm->min_rate)
> +		rate = nm->min_rate;
> +

I guess you can just return there. There's no point in trying to find
the factors at this point, since the minimum should be a value that
can be reached.

>  	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
>  		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
>  			rate /= nm->fixed_post_div;
> @@ -134,7 +137,7 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
>  	_nm.min_m = 1;
>  	_nm.max_m = nm->m.max ?: 1 << nm->m.width;
>  
> -	ccu_nm_find_best(*parent_rate, rate, &_nm);
> +	ccu_nm_find_best(*parent_rate, rate, nm->min_rate, &_nm);

Therefore, you don't need to change the prototype there either.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 01/16] clk: sunxi-ng: Add check for minimal rate to NM PLLs

[Maxime Ripard]

Hi,

On Tue, Feb 27, 2018 at 11:26:46PM +0100, Jernej Skrabec wrote:
> Some NM PLLs doesn't work well when their output clock rate is set below
> certain rate.
> 
> Add support for that constrain.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
>  drivers/clk/sunxi-ng/ccu_nm.c | 11 +++++++----
>  drivers/clk/sunxi-ng/ccu_nm.h | 27 +++++++++++++++++++++++++++
>  2 files changed, 34 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
> index a16de092bf94..7fc743c78c1b 100644
> --- a/drivers/clk/sunxi-ng/ccu_nm.c
> +++ b/drivers/clk/sunxi-ng/ccu_nm.c
> @@ -20,7 +20,7 @@ struct _ccu_nm {
>  };
>  
>  static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
> -			     struct _ccu_nm *nm)
> +			     unsigned long min_rate, struct _ccu_nm *nm)
>  {
>  	unsigned long best_rate = 0;
>  	unsigned long best_n = 0, best_m = 0;
> @@ -30,7 +30,7 @@ static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
>  		for (_m = nm->min_m; _m <= nm->max_m; _m++) {
>  			unsigned long tmp_rate = parent * _n  / _m;
>  
> -			if (tmp_rate > rate)
> +			if (tmp_rate > rate || tmp_rate < min_rate)
>  				continue;
>  
>  			if ((rate - tmp_rate) < (rate - best_rate)) {
> @@ -117,6 +117,9 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
>  	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
>  		rate *= nm->fixed_post_div;
>  
> +	if (rate < nm->min_rate)
> +		rate = nm->min_rate;
> +

I guess you can just return there. There's no point in trying to find
the factors at this point, since the minimum should be a value that
can be reached.

>  	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
>  		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
>  			rate /= nm->fixed_post_div;
> @@ -134,7 +137,7 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
>  	_nm.min_m = 1;
>  	_nm.max_m = nm->m.max ?: 1 << nm->m.width;
>  
> -	ccu_nm_find_best(*parent_rate, rate, &_nm);
> +	ccu_nm_find_best(*parent_rate, rate, nm->min_rate, &_nm);

Therefore, you don't need to change the prototype there either.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180228/81221c2e/attachment.sig>

Re: [PATCH v2 06/16] drm/sun4i: Don't process LVDS if TCON doesn't support it

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 522 bytes --]

On Tue, Feb 27, 2018 at 11:26:51PM +0100, Jernej Skrabec wrote:
> TCON checks for LVDS properties even if it doesn't support it. Add a
> check to skip that part of the code if TCON doesn't support channel 0.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>

I have already sent a similar patch here:
https://lists.freedesktop.org/archives/dri-devel/2018-February/166665.html

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 06/16] drm/sun4i: Don't process LVDS if TCON doesn't support it

[Maxime Ripard]

[-- Attachment #1.1: Type: text/plain, Size: 522 bytes --]

On Tue, Feb 27, 2018 at 11:26:51PM +0100, Jernej Skrabec wrote:
> TCON checks for LVDS properties even if it doesn't support it. Add a
> check to skip that part of the code if TCON doesn't support channel 0.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>

I have already sent a similar patch here:
https://lists.freedesktop.org/archives/dri-devel/2018-February/166665.html

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 06/16] drm/sun4i: Don't process LVDS if TCON doesn't support it

[Maxime Ripard]

On Tue, Feb 27, 2018 at 11:26:51PM +0100, Jernej Skrabec wrote:
> TCON checks for LVDS properties even if it doesn't support it. Add a
> check to skip that part of the code if TCON doesn't support channel 0.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>

I have already sent a similar patch here:
https://lists.freedesktop.org/archives/dri-devel/2018-February/166665.html

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180228/9345a49d/attachment.sig>

Re: [PATCH v2 00/16] Implement H3/H5 HDMI driver

[Jernej Škrabec]

Hi Maxime,

Dne torek, 27. februar 2018 ob 23:26:45 CET je Jernej Skrabec napisal(a):
> This series implements H3/H5 HDMI driver. It was tested on OrangePi 2 (H3),
> OrangePi Plus2e (H3) and OrangePi PC2 (H5) with many resolutions and it
> works well. Bug, which prevented correct operation for some resolutions,
> is also fixed.
> 
> Code is based on linux-next, next-20180226 tag.

Today I tried on this series on  next-20180228, but resolution switching 
doesn't really work. The reason for this is use of clk_set_rate_exclusive() in 
sun4i_tcon1_mode_set(). If I revert it to ordinary clk_set_rate() it works ok. 
I investigated a bit and it seems that clocks stays at first set even if tcon 
(the owner of exclusive lock) request the new one. Example:

[   69.325732] TCON clk wanted: 148500000
[   69.325740] TCON real clk: 69272728
[   69.325770] HDMI clk wanted: 148500000
[   69.325773] HDMI real clk: 138545455
[   69.325815] HDMI PHY clk wanted: 148500000
[   69.325819] HDMI PHY real clk: 138545454

Is there anything I can do to help debug this?

Best regards,
Jernej

Re: [PATCH v2 00/16] Implement H3/H5 HDMI driver

[Jernej Škrabec]

Hi Maxime,

Dne torek, 27. februar 2018 ob 23:26:45 CET je Jernej Skrabec napisal(a):
> This series implements H3/H5 HDMI driver. It was tested on OrangePi 2 (H3),
> OrangePi Plus2e (H3) and OrangePi PC2 (H5) with many resolutions and it
> works well. Bug, which prevented correct operation for some resolutions,
> is also fixed.
> 
> Code is based on linux-next, next-20180226 tag.

Today I tried on this series on  next-20180228, but resolution switching 
doesn't really work. The reason for this is use of clk_set_rate_exclusive() in 
sun4i_tcon1_mode_set(). If I revert it to ordinary clk_set_rate() it works ok. 
I investigated a bit and it seems that clocks stays at first set even if tcon 
(the owner of exclusive lock) request the new one. Example:

[   69.325732] TCON clk wanted: 148500000
[   69.325740] TCON real clk: 69272728
[   69.325770] HDMI clk wanted: 148500000
[   69.325773] HDMI real clk: 138545455
[   69.325815] HDMI PHY clk wanted: 148500000
[   69.325819] HDMI PHY real clk: 138545454

Is there anything I can do to help debug this?

Best regards,
Jernej

[PATCH v2 00/16] Implement H3/H5 HDMI driver

[Jernej Škrabec]

Hi Maxime,

Dne torek, 27. februar 2018 ob 23:26:45 CET je Jernej Skrabec napisal(a):
> This series implements H3/H5 HDMI driver. It was tested on OrangePi 2 (H3),
> OrangePi Plus2e (H3) and OrangePi PC2 (H5) with many resolutions and it
> works well. Bug, which prevented correct operation for some resolutions,
> is also fixed.
> 
> Code is based on linux-next, next-20180226 tag.

Today I tried on this series on  next-20180228, but resolution switching 
doesn't really work. The reason for this is use of clk_set_rate_exclusive() in 
sun4i_tcon1_mode_set(). If I revert it to ordinary clk_set_rate() it works ok. 
I investigated a bit and it seems that clocks stays at first set even if tcon 
(the owner of exclusive lock) request the new one. Example:

[   69.325732] TCON clk wanted: 148500000
[   69.325740] TCON real clk: 69272728
[   69.325770] HDMI clk wanted: 148500000
[   69.325773] HDMI real clk: 138545455
[   69.325815] HDMI PHY clk wanted: 148500000
[   69.325819] HDMI PHY real clk: 138545454

Is there anything I can do to help debug this?

Best regards,
Jernej

Re: [PATCH v2 06/16] drm/sun4i: Don't process LVDS if TCON doesn't support it

[Jernej Škrabec]

Hi Maxime,

Dne sreda, 28. februar 2018 ob 08:36:08 CET je Maxime Ripard napisal(a):
> On Tue, Feb 27, 2018 at 11:26:51PM +0100, Jernej Skrabec wrote:
> > TCON checks for LVDS properties even if it doesn't support it. Add a
> > check to skip that part of the code if TCON doesn't support channel 0.
> > 
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> 
> I have already sent a similar patch here:
> https://lists.freedesktop.org/archives/dri-devel/2018-February/166665.html

Right. However, check last chunk in my patch. There is no need to call 
sun4i_rgb_init() if TCON doesn't support channel 0. It doesn't do anything, 
except producing warning. Will you add that this change to your patch and then 
I can remove this patch from next revision?

BTW, your patch won't apply cleanly, since you didn't base it on latest code 
(every TCON variant has at least one entry now).

Best regards,
Jernej

[PATCH v2 06/16] drm/sun4i: Don't process LVDS if TCON doesn't support it

[Jernej Škrabec]

Hi Maxime,

Dne sreda, 28. februar 2018 ob 08:36:08 CET je Maxime Ripard napisal(a):
> On Tue, Feb 27, 2018 at 11:26:51PM +0100, Jernej Skrabec wrote:
> > TCON checks for LVDS properties even if it doesn't support it. Add a
> > check to skip that part of the code if TCON doesn't support channel 0.
> > 
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> 
> I have already sent a similar patch here:
> https://lists.freedesktop.org/archives/dri-devel/2018-February/166665.html

Right. However, check last chunk in my patch. There is no need to call 
sun4i_rgb_init() if TCON doesn't support channel 0. It doesn't do anything, 
except producing warning. Will you add that this change to your patch and then 
I can remove this patch from next revision?

BTW, your patch won't apply cleanly, since you didn't base it on latest code 
(every TCON variant has at least one entry now).

Best regards,
Jernej

Re: [PATCH v2 01/16] clk: sunxi-ng: Add check for minimal rate to NM PLLs

[Jernej Škrabec]

Hi,

Dne sreda, 28. februar 2018 ob 08:34:40 CET je Maxime Ripard napisal(a):
> Hi,
> 
> On Tue, Feb 27, 2018 at 11:26:46PM +0100, Jernej Skrabec wrote:
> > Some NM PLLs doesn't work well when their output clock rate is set below
> > certain rate.
> > 
> > Add support for that constrain.
> > 
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > ---
> > 
> >  drivers/clk/sunxi-ng/ccu_nm.c | 11 +++++++----
> >  drivers/clk/sunxi-ng/ccu_nm.h | 27 +++++++++++++++++++++++++++
> >  2 files changed, 34 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
> > index a16de092bf94..7fc743c78c1b 100644
> > --- a/drivers/clk/sunxi-ng/ccu_nm.c
> > +++ b/drivers/clk/sunxi-ng/ccu_nm.c
> > @@ -20,7 +20,7 @@ struct _ccu_nm {
> > 
> >  };
> >  
> >  static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
> > 
> > -			     struct _ccu_nm *nm)
> > +			     unsigned long min_rate, struct _ccu_nm *nm)
> > 
> >  {
> >  
> >  	unsigned long best_rate = 0;
> >  	unsigned long best_n = 0, best_m = 0;
> > 
> > @@ -30,7 +30,7 @@ static void ccu_nm_find_best(unsigned long parent,
> > unsigned long rate,> 
> >  		for (_m = nm->min_m; _m <= nm->max_m; _m++) {
> >  		
> >  			unsigned long tmp_rate = parent * _n  / _m;
> > 
> > -			if (tmp_rate > rate)
> > +			if (tmp_rate > rate || tmp_rate < min_rate)
> > 
> >  				continue;
> >  			
> >  			if ((rate - tmp_rate) < (rate - best_rate)) {
> > 
> > @@ -117,6 +117,9 @@ static long ccu_nm_round_rate(struct clk_hw *hw,
> > unsigned long rate,> 
> >  	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
> >  	
> >  		rate *= nm->fixed_post_div;
> > 
> > +	if (rate < nm->min_rate)
> > +		rate = nm->min_rate;
> > +
> 
> I guess you can just return there. There's no point in trying to find
> the factors at this point, since the minimum should be a value that
> can be reached.
> 

Right, I already tested it and it works.

Best regards,
Jernej

> >  	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
> >  	
> >  		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
> >  		
> >  			rate /= nm->fixed_post_div;
> > 
> > @@ -134,7 +137,7 @@ static long ccu_nm_round_rate(struct clk_hw *hw,
> > unsigned long rate,> 
> >  	_nm.min_m = 1;
> >  	_nm.max_m = nm->m.max ?: 1 << nm->m.width;
> > 
> > -	ccu_nm_find_best(*parent_rate, rate, &_nm);
> > +	ccu_nm_find_best(*parent_rate, rate, nm->min_rate, &_nm);
> 
> Therefore, you don't need to change the prototype there either.
> 
> Maxime
> 
> --
> Maxime Ripard, Bootlin (formerly Free Electrons)
> Embedded Linux and Kernel engineering
> https://bootlin.com

Re: [PATCH v2 01/16] clk: sunxi-ng: Add check for minimal rate to NM PLLs

[Jernej Škrabec]

Hi,

Dne sreda, 28. februar 2018 ob 08:34:40 CET je Maxime Ripard napisal(a):
> Hi,
> 
> On Tue, Feb 27, 2018 at 11:26:46PM +0100, Jernej Skrabec wrote:
> > Some NM PLLs doesn't work well when their output clock rate is set below
> > certain rate.
> > 
> > Add support for that constrain.
> > 
> > Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
> > ---
> > 
> >  drivers/clk/sunxi-ng/ccu_nm.c | 11 +++++++----
> >  drivers/clk/sunxi-ng/ccu_nm.h | 27 +++++++++++++++++++++++++++
> >  2 files changed, 34 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
> > index a16de092bf94..7fc743c78c1b 100644
> > --- a/drivers/clk/sunxi-ng/ccu_nm.c
> > +++ b/drivers/clk/sunxi-ng/ccu_nm.c
> > @@ -20,7 +20,7 @@ struct _ccu_nm {
> > 
> >  };
> >  
> >  static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
> > 
> > -			     struct _ccu_nm *nm)
> > +			     unsigned long min_rate, struct _ccu_nm *nm)
> > 
> >  {
> >  
> >  	unsigned long best_rate = 0;
> >  	unsigned long best_n = 0, best_m = 0;
> > 
> > @@ -30,7 +30,7 @@ static void ccu_nm_find_best(unsigned long parent,
> > unsigned long rate,> 
> >  		for (_m = nm->min_m; _m <= nm->max_m; _m++) {
> >  		
> >  			unsigned long tmp_rate = parent * _n  / _m;
> > 
> > -			if (tmp_rate > rate)
> > +			if (tmp_rate > rate || tmp_rate < min_rate)
> > 
> >  				continue;
> >  			
> >  			if ((rate - tmp_rate) < (rate - best_rate)) {
> > 
> > @@ -117,6 +117,9 @@ static long ccu_nm_round_rate(struct clk_hw *hw,
> > unsigned long rate,> 
> >  	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
> >  	
> >  		rate *= nm->fixed_post_div;
> > 
> > +	if (rate < nm->min_rate)
> > +		rate = nm->min_rate;
> > +
> 
> I guess you can just return there. There's no point in trying to find
> the factors at this point, since the minimum should be a value that
> can be reached.
> 

Right, I already tested it and it works.

Best regards,
Jernej

> >  	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
> >  	
> >  		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
> >  		
> >  			rate /= nm->fixed_post_div;
> > 
> > @@ -134,7 +137,7 @@ static long ccu_nm_round_rate(struct clk_hw *hw,
> > unsigned long rate,> 
> >  	_nm.min_m = 1;
> >  	_nm.max_m = nm->m.max ?: 1 << nm->m.width;
> > 
> > -	ccu_nm_find_best(*parent_rate, rate, &_nm);
> > +	ccu_nm_find_best(*parent_rate, rate, nm->min_rate, &_nm);
> 
> Therefore, you don't need to change the prototype there either.
> 
> Maxime
> 
> --
> Maxime Ripard, Bootlin (formerly Free Electrons)
> Embedded Linux and Kernel engineering
> https://bootlin.com

[PATCH v2 01/16] clk: sunxi-ng: Add check for minimal rate to NM PLLs

[Jernej Škrabec]

Hi,

Dne sreda, 28. februar 2018 ob 08:34:40 CET je Maxime Ripard napisal(a):
> Hi,
> 
> On Tue, Feb 27, 2018 at 11:26:46PM +0100, Jernej Skrabec wrote:
> > Some NM PLLs doesn't work well when their output clock rate is set below
> > certain rate.
> > 
> > Add support for that constrain.
> > 
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > ---
> > 
> >  drivers/clk/sunxi-ng/ccu_nm.c | 11 +++++++----
> >  drivers/clk/sunxi-ng/ccu_nm.h | 27 +++++++++++++++++++++++++++
> >  2 files changed, 34 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
> > index a16de092bf94..7fc743c78c1b 100644
> > --- a/drivers/clk/sunxi-ng/ccu_nm.c
> > +++ b/drivers/clk/sunxi-ng/ccu_nm.c
> > @@ -20,7 +20,7 @@ struct _ccu_nm {
> > 
> >  };
> >  
> >  static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
> > 
> > -			     struct _ccu_nm *nm)
> > +			     unsigned long min_rate, struct _ccu_nm *nm)
> > 
> >  {
> >  
> >  	unsigned long best_rate = 0;
> >  	unsigned long best_n = 0, best_m = 0;
> > 
> > @@ -30,7 +30,7 @@ static void ccu_nm_find_best(unsigned long parent,
> > unsigned long rate,> 
> >  		for (_m = nm->min_m; _m <= nm->max_m; _m++) {
> >  		
> >  			unsigned long tmp_rate = parent * _n  / _m;
> > 
> > -			if (tmp_rate > rate)
> > +			if (tmp_rate > rate || tmp_rate < min_rate)
> > 
> >  				continue;
> >  			
> >  			if ((rate - tmp_rate) < (rate - best_rate)) {
> > 
> > @@ -117,6 +117,9 @@ static long ccu_nm_round_rate(struct clk_hw *hw,
> > unsigned long rate,> 
> >  	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
> >  	
> >  		rate *= nm->fixed_post_div;
> > 
> > +	if (rate < nm->min_rate)
> > +		rate = nm->min_rate;
> > +
> 
> I guess you can just return there. There's no point in trying to find
> the factors at this point, since the minimum should be a value that
> can be reached.
> 

Right, I already tested it and it works.

Best regards,
Jernej

> >  	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
> >  	
> >  		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
> >  		
> >  			rate /= nm->fixed_post_div;
> > 
> > @@ -134,7 +137,7 @@ static long ccu_nm_round_rate(struct clk_hw *hw,
> > unsigned long rate,> 
> >  	_nm.min_m = 1;
> >  	_nm.max_m = nm->m.max ?: 1 << nm->m.width;
> > 
> > -	ccu_nm_find_best(*parent_rate, rate, &_nm);
> > +	ccu_nm_find_best(*parent_rate, rate, nm->min_rate, &_nm);
> 
> Therefore, you don't need to change the prototype there either.
> 
> Maxime
> 
> --
> Maxime Ripard, Bootlin (formerly Free Electrons)
> Embedded Linux and Kernel engineering
> https://bootlin.com

Re: [PATCH v2 00/16] Implement H3/H5 HDMI driver

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1437 bytes --]

Hi,

On Wed, Feb 28, 2018 at 10:23:35PM +0100, Jernej Škrabec wrote:
> Dne torek, 27. februar 2018 ob 23:26:45 CET je Jernej Skrabec napisal(a):
> > This series implements H3/H5 HDMI driver. It was tested on OrangePi 2 (H3),
> > OrangePi Plus2e (H3) and OrangePi PC2 (H5) with many resolutions and it
> > works well. Bug, which prevented correct operation for some resolutions,
> > is also fixed.
> > 
> > Code is based on linux-next, next-20180226 tag.
> 
> Today I tried on this series on  next-20180228, but resolution switching 
> doesn't really work. The reason for this is use of clk_set_rate_exclusive() in 
> sun4i_tcon1_mode_set(). If I revert it to ordinary clk_set_rate() it works ok. 
> I investigated a bit and it seems that clocks stays at first set even if tcon 
> (the owner of exclusive lock) request the new one. Example:
> 
> [   69.325732] TCON clk wanted: 148500000
> [   69.325740] TCON real clk: 69272728
> [   69.325770] HDMI clk wanted: 148500000
> [   69.325773] HDMI real clk: 138545455
> [   69.325815] HDMI PHY clk wanted: 148500000
> [   69.325819] HDMI PHY real clk: 138545454
> 
> Is there anything I can do to help debug this?

I don't recall if disable hook is called during a mode set, but if it
is, you can add a call to clk_rate_exclusive_put.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 00/16] Implement H3/H5 HDMI driver

[Maxime Ripard]

[-- Attachment #1.1: Type: text/plain, Size: 1437 bytes --]

Hi,

On Wed, Feb 28, 2018 at 10:23:35PM +0100, Jernej Škrabec wrote:
> Dne torek, 27. februar 2018 ob 23:26:45 CET je Jernej Skrabec napisal(a):
> > This series implements H3/H5 HDMI driver. It was tested on OrangePi 2 (H3),
> > OrangePi Plus2e (H3) and OrangePi PC2 (H5) with many resolutions and it
> > works well. Bug, which prevented correct operation for some resolutions,
> > is also fixed.
> > 
> > Code is based on linux-next, next-20180226 tag.
> 
> Today I tried on this series on  next-20180228, but resolution switching 
> doesn't really work. The reason for this is use of clk_set_rate_exclusive() in 
> sun4i_tcon1_mode_set(). If I revert it to ordinary clk_set_rate() it works ok. 
> I investigated a bit and it seems that clocks stays at first set even if tcon 
> (the owner of exclusive lock) request the new one. Example:
> 
> [   69.325732] TCON clk wanted: 148500000
> [   69.325740] TCON real clk: 69272728
> [   69.325770] HDMI clk wanted: 148500000
> [   69.325773] HDMI real clk: 138545455
> [   69.325815] HDMI PHY clk wanted: 148500000
> [   69.325819] HDMI PHY real clk: 138545454
> 
> Is there anything I can do to help debug this?

I don't recall if disable hook is called during a mode set, but if it
is, you can add a call to clk_rate_exclusive_put.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 00/16] Implement H3/H5 HDMI driver

[Maxime Ripard]

Hi,

On Wed, Feb 28, 2018 at 10:23:35PM +0100, Jernej ?krabec wrote:
> Dne torek, 27. februar 2018 ob 23:26:45 CET je Jernej Skrabec napisal(a):
> > This series implements H3/H5 HDMI driver. It was tested on OrangePi 2 (H3),
> > OrangePi Plus2e (H3) and OrangePi PC2 (H5) with many resolutions and it
> > works well. Bug, which prevented correct operation for some resolutions,
> > is also fixed.
> > 
> > Code is based on linux-next, next-20180226 tag.
> 
> Today I tried on this series on  next-20180228, but resolution switching 
> doesn't really work. The reason for this is use of clk_set_rate_exclusive() in 
> sun4i_tcon1_mode_set(). If I revert it to ordinary clk_set_rate() it works ok. 
> I investigated a bit and it seems that clocks stays at first set even if tcon 
> (the owner of exclusive lock) request the new one. Example:
> 
> [   69.325732] TCON clk wanted: 148500000
> [   69.325740] TCON real clk: 69272728
> [   69.325770] HDMI clk wanted: 148500000
> [   69.325773] HDMI real clk: 138545455
> [   69.325815] HDMI PHY clk wanted: 148500000
> [   69.325819] HDMI PHY real clk: 138545454
> 
> Is there anything I can do to help debug this?

I don't recall if disable hook is called during a mode set, but if it
is, you can add a call to clk_rate_exclusive_put.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180301/30cb71ba/attachment.sig>

Re: [PATCH v2 06/16] drm/sun4i: Don't process LVDS if TCON doesn't support it

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1460 bytes --]

Hi,

On Wed, Feb 28, 2018 at 10:43:30PM +0100, Jernej Škrabec wrote:
> Dne sreda, 28. februar 2018 ob 08:36:08 CET je Maxime Ripard napisal(a):
> > On Tue, Feb 27, 2018 at 11:26:51PM +0100, Jernej Skrabec wrote:
> > > TCON checks for LVDS properties even if it doesn't support it. Add a
> > > check to skip that part of the code if TCON doesn't support channel 0.
> > > 
> > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > 
> > I have already sent a similar patch here:
> > https://lists.freedesktop.org/archives/dri-devel/2018-February/166665.html
> 
> Right. However, check last chunk in my patch. There is no need to call 
> sun4i_rgb_init() if TCON doesn't support channel 0. It doesn't do anything, 
> except producing warning. Will you add that this change to your patch and then 
> I can remove this patch from next revision?

They are orthogonal to me though. Mine fixes the spurious LVDS error
messages that you were mentionning in your commit log. Your point here
is that we shouldn't need to even register the LVDS and RGB output
when there's no channel 0. This is obviously true, but it should be in
a separate patch.

> BTW, your patch won't apply cleanly, since you didn't base it on latest code 
> (every TCON variant has at least one entry now).

I'll fix it when applying.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 06/16] drm/sun4i: Don't process LVDS if TCON doesn't support it

[Maxime Ripard]

[-- Attachment #1.1: Type: text/plain, Size: 1460 bytes --]

Hi,

On Wed, Feb 28, 2018 at 10:43:30PM +0100, Jernej Škrabec wrote:
> Dne sreda, 28. februar 2018 ob 08:36:08 CET je Maxime Ripard napisal(a):
> > On Tue, Feb 27, 2018 at 11:26:51PM +0100, Jernej Skrabec wrote:
> > > TCON checks for LVDS properties even if it doesn't support it. Add a
> > > check to skip that part of the code if TCON doesn't support channel 0.
> > > 
> > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > 
> > I have already sent a similar patch here:
> > https://lists.freedesktop.org/archives/dri-devel/2018-February/166665.html
> 
> Right. However, check last chunk in my patch. There is no need to call 
> sun4i_rgb_init() if TCON doesn't support channel 0. It doesn't do anything, 
> except producing warning. Will you add that this change to your patch and then 
> I can remove this patch from next revision?

They are orthogonal to me though. Mine fixes the spurious LVDS error
messages that you were mentionning in your commit log. Your point here
is that we shouldn't need to even register the LVDS and RGB output
when there's no channel 0. This is obviously true, but it should be in
a separate patch.

> BTW, your patch won't apply cleanly, since you didn't base it on latest code 
> (every TCON variant has at least one entry now).

I'll fix it when applying.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 06/16] drm/sun4i: Don't process LVDS if TCON doesn't support it

[Maxime Ripard]

Hi,

On Wed, Feb 28, 2018 at 10:43:30PM +0100, Jernej ?krabec wrote:
> Dne sreda, 28. februar 2018 ob 08:36:08 CET je Maxime Ripard napisal(a):
> > On Tue, Feb 27, 2018 at 11:26:51PM +0100, Jernej Skrabec wrote:
> > > TCON checks for LVDS properties even if it doesn't support it. Add a
> > > check to skip that part of the code if TCON doesn't support channel 0.
> > > 
> > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > 
> > I have already sent a similar patch here:
> > https://lists.freedesktop.org/archives/dri-devel/2018-February/166665.html
> 
> Right. However, check last chunk in my patch. There is no need to call 
> sun4i_rgb_init() if TCON doesn't support channel 0. It doesn't do anything, 
> except producing warning. Will you add that this change to your patch and then 
> I can remove this patch from next revision?

They are orthogonal to me though. Mine fixes the spurious LVDS error
messages that you were mentionning in your commit log. Your point here
is that we shouldn't need to even register the LVDS and RGB output
when there's no channel 0. This is obviously true, but it should be in
a separate patch.

> BTW, your patch won't apply cleanly, since you didn't base it on latest code 
> (every TCON variant has at least one entry now).

I'll fix it when applying.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180302/addc48ec/attachment-0001.sig>