[PATCH AUTOSEL for 4.14 01/84] drm/edid: set ELD connector type in drm_edid_to_eld()

[PATCH AUTOSEL for 4.14 01/84] drm/edid: set ELD connector type in drm_edid_to_eld()

[Sasha Levin]

From: Jani Nikula <jani.nikula@intel.com>

[ Upstream commit 1d1c36650752b7fb81cee515a9bba4131cac4b7c ]

Since drm_edid_to_eld() knows the connector type, we can set the type in
ELD while at it. Most connectors this gets called on are not DP
encoders, and with the HDMI type being 0, this does not change behaviour
for non-DP.

For i915 having this in place earlier would have saved a considerable
amount of debugging that lead to the fix 2d8f63297b9f ("drm/i915: always
update ELD connector type after get modes"). I don't see other drivers,
even the ones calling drm_edid_to_eld() on DP connectors, setting the
connector type in ELD.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d527b31619528c477c2c136f25cdf118bc0cfc1d.1509545641.git.jani.nikula@intel.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/drm_edid.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index d52c9758d8cf..1f1fd3139c5b 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -3823,8 +3823,7 @@ EXPORT_SYMBOL(drm_edid_get_monitor_name);
  * @edid: EDID to parse
  *
  * Fill the ELD (EDID-Like Data) buffer for passing to the audio driver. The
- * Conn_Type, HDCP and Port_ID ELD fields are left for the graphics driver to
- * fill in.
+ * HDCP and Port_ID ELD fields are left for the graphics driver to fill in.
  */
 void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
 {
@@ -3905,6 +3904,12 @@ void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
 	}
 	eld[5] |= total_sad_count << 4;
 
+	if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
+	    connector->connector_type == DRM_MODE_CONNECTOR_eDP)
+		eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= DRM_ELD_CONN_TYPE_DP;
+	else
+		eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= DRM_ELD_CONN_TYPE_HDMI;
+
 	eld[DRM_ELD_BASELINE_ELD_LEN] =
 		DIV_ROUND_UP(drm_eld_calc_baseline_block_size(eld), 4);
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 03/84] video/hdmi: Allow "empty" HDMI infoframes

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 593f4b19a094c4426bd1e1e3cbab87a48bd13c71 ]

HDMI 2.0 Appendix F suggest that we should keep sending the infoframe
when switching from 3D to 2D mode, even if the infoframe isn't strictly
necessary (ie. not needed to transmit the VIC or stereo information).
This is a workaround against some sinks that fail to realize that they
should switch from 3D to 2D mode when the source stop transmitting
the infoframe.

v2: Handle unpack() as well
    Pull the length calculation into a helper

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-2-ville.syrjala@linux.intel.com
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/video/hdmi.c | 51 +++++++++++++++++++++++++++++++--------------------
 1 file changed, 31 insertions(+), 20 deletions(-)

diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index 1cf907ecded4..111a0ab6280a 100644
--- a/drivers/video/hdmi.c
+++ b/drivers/video/hdmi.c
@@ -321,6 +321,17 @@ int hdmi_vendor_infoframe_init(struct hdmi_vendor_infoframe *frame)
 }
 EXPORT_SYMBOL(hdmi_vendor_infoframe_init);
 
+static int hdmi_vendor_infoframe_length(const struct hdmi_vendor_infoframe *frame)
+{
+	/* for side by side (half) we also need to provide 3D_Ext_Data */
+	if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
+		return 6;
+	else if (frame->vic != 0 || frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
+		return 5;
+	else
+		return 4;
+}
+
 /**
  * hdmi_vendor_infoframe_pack() - write a HDMI vendor infoframe to binary buffer
  * @frame: HDMI infoframe
@@ -341,19 +352,11 @@ ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
 	u8 *ptr = buffer;
 	size_t length;
 
-	/* empty info frame */
-	if (frame->vic == 0 && frame->s3d_struct == HDMI_3D_STRUCTURE_INVALID)
-		return -EINVAL;
-
 	/* only one of those can be supplied */
 	if (frame->vic != 0 && frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
 		return -EINVAL;
 
-	/* for side by side (half) we also need to provide 3D_Ext_Data */
-	if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
-		frame->length = 6;
-	else
-		frame->length = 5;
+	frame->length = hdmi_vendor_infoframe_length(frame);
 
 	length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
 
@@ -372,14 +375,16 @@ ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
 	ptr[5] = 0x0c;
 	ptr[6] = 0x00;
 
-	if (frame->vic) {
-		ptr[7] = 0x1 << 5;	/* video format */
-		ptr[8] = frame->vic;
-	} else {
+	if (frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID) {
 		ptr[7] = 0x2 << 5;	/* video format */
 		ptr[8] = (frame->s3d_struct & 0xf) << 4;
 		if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
 			ptr[9] = (frame->s3d_ext_data & 0xf) << 4;
+	} else if (frame->vic) {
+		ptr[7] = 0x1 << 5;	/* video format */
+		ptr[8] = frame->vic;
+	} else {
+		ptr[7] = 0x0 << 5;	/* video format */
 	}
 
 	hdmi_infoframe_set_checksum(buffer, length);
@@ -1165,7 +1170,7 @@ hdmi_vendor_any_infoframe_unpack(union hdmi_vendor_any_infoframe *frame,
 
 	if (ptr[0] != HDMI_INFOFRAME_TYPE_VENDOR ||
 	    ptr[1] != 1 ||
-	    (ptr[2] != 5 && ptr[2] != 6))
+	    (ptr[2] != 4 && ptr[2] != 5 && ptr[2] != 6))
 		return -EINVAL;
 
 	length = ptr[2];
@@ -1193,16 +1198,22 @@ hdmi_vendor_any_infoframe_unpack(union hdmi_vendor_any_infoframe *frame,
 
 	hvf->length = length;
 
-	if (hdmi_video_format == 0x1) {
-		hvf->vic = ptr[4];
-	} else if (hdmi_video_format == 0x2) {
+	if (hdmi_video_format == 0x2) {
+		if (length != 5 && length != 6)
+			return -EINVAL;
 		hvf->s3d_struct = ptr[4] >> 4;
 		if (hvf->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) {
-			if (length == 6)
-				hvf->s3d_ext_data = ptr[5] >> 4;
-			else
+			if (length != 6)
 				return -EINVAL;
+			hvf->s3d_ext_data = ptr[5] >> 4;
 		}
+	} else if (hdmi_video_format == 0x1) {
+		if (length != 5)
+			return -EINVAL;
+		hvf->vic = ptr[4];
+	} else {
+		if (length != 4)
+			return -EINVAL;
 	}
 
 	return 0;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 02/84] dma-buf/fence: Fix lock inversion within dma-fence-array

[Sasha Levin]

From: Chris Wilson <chris@chris-wilson.co.uk>

[ Upstream commit 03e4e0a9e02cf703da331ff6cfd57d0be9bf5692 ]

Ages ago Rob Clark noted,

"Currently with fence-array, we have a potential deadlock situation.  If
we fence_add_callback() on an array-fence, the array-fence's lock is
acquired first, and in it's ->enable_signaling() callback, it will install
cbs on it's array-member fences, so the array-member's lock is acquired
second.

But in the signal path, the array-member's lock is acquired first, and
the array-fence's lock acquired second."

Rob proposed either extensive changes to dma-fence to unnest the
fence-array signaling, or to defer the signaling onto a workqueue. This
is a more refined version of the later, that should keep the latency
of the fence signaling to a minimum by using an irq-work, which is
executed asap.

Reported-by: Rob Clark <robdclark@gmail.com>
Suggested-by: Rob Clark <robdclark@gmail.com>
References: 1476635975-21981-1-git-send-email-robdclark@gmail.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114162719.30958-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/base/Kconfig              |  1 +
 drivers/dma-buf/dma-fence-array.c | 14 ++++++++++++--
 include/linux/dma-fence-array.h   |  3 +++
 3 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 2415ad9f6dd4..49fd50fccd48 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -249,6 +249,7 @@ config DMA_SHARED_BUFFER
 	bool
 	default n
 	select ANON_INODES
+	select IRQ_WORK
 	help
 	  This option enables the framework for buffer-sharing between
 	  multiple drivers. A buffer is associated with a file using driver
diff --git a/drivers/dma-buf/dma-fence-array.c b/drivers/dma-buf/dma-fence-array.c
index 0350829ba62e..dd1edfb27b61 100644
--- a/drivers/dma-buf/dma-fence-array.c
+++ b/drivers/dma-buf/dma-fence-array.c
@@ -31,6 +31,14 @@ static const char *dma_fence_array_get_timeline_name(struct dma_fence *fence)
 	return "unbound";
 }
 
+static void irq_dma_fence_array_work(struct irq_work *wrk)
+{
+	struct dma_fence_array *array = container_of(wrk, typeof(*array), work);
+
+	dma_fence_signal(&array->base);
+	dma_fence_put(&array->base);
+}
+
 static void dma_fence_array_cb_func(struct dma_fence *f,
 				    struct dma_fence_cb *cb)
 {
@@ -39,8 +47,9 @@ static void dma_fence_array_cb_func(struct dma_fence *f,
 	struct dma_fence_array *array = array_cb->array;
 
 	if (atomic_dec_and_test(&array->num_pending))
-		dma_fence_signal(&array->base);
-	dma_fence_put(&array->base);
+		irq_work_queue(&array->work);
+	else
+		dma_fence_put(&array->base);
 }
 
 static bool dma_fence_array_enable_signaling(struct dma_fence *fence)
@@ -136,6 +145,7 @@ struct dma_fence_array *dma_fence_array_create(int num_fences,
 	spin_lock_init(&array->lock);
 	dma_fence_init(&array->base, &dma_fence_array_ops, &array->lock,
 		       context, seqno);
+	init_irq_work(&array->work, irq_dma_fence_array_work);
 
 	array->num_fences = num_fences;
 	atomic_set(&array->num_pending, signal_on_any ? 1 : num_fences);
diff --git a/include/linux/dma-fence-array.h b/include/linux/dma-fence-array.h
index 332a5420243c..bc8940ca280d 100644
--- a/include/linux/dma-fence-array.h
+++ b/include/linux/dma-fence-array.h
@@ -21,6 +21,7 @@
 #define __LINUX_DMA_FENCE_ARRAY_H
 
 #include <linux/dma-fence.h>
+#include <linux/irq_work.h>
 
 /**
  * struct dma_fence_array_cb - callback helper for fence array
@@ -47,6 +48,8 @@ struct dma_fence_array {
 	unsigned num_fences;
 	atomic_t num_pending;
 	struct dma_fence **fences;
+
+	struct irq_work work;
 };
 
 extern const struct dma_fence_ops dma_fence_array_ops;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 04/84] HID: multitouch: Only look at non touch fields in first packet of a frame

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 55746d28d66860bccaae20a67b55b9d5db7c14af ]

Devices in "single finger hybrid mode" will send one report per finger,
on some devices only the first report of such a multi-packet frame will
contain a value for BTN_LEFT, in subsequent reports (if multiple fingers
are down) the value is always 0, causing hid-mt to report BTN_LEFT going
1 - 0 - 1 - 0 when pressing a clickpad and putting down a second finger.
This happens for example on USB 0603:0002 mt touchpads.

This commit fixes this by only reporting non touch fields for the first
packet of a (possibly) multi-packet frame.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/hid/hid-multitouch.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 9e8c4d2ba11d..6598501c1ad0 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -738,9 +738,11 @@ static int mt_touch_event(struct hid_device *hid, struct hid_field *field,
 }
 
 static void mt_process_mt_event(struct hid_device *hid, struct hid_field *field,
-				struct hid_usage *usage, __s32 value)
+				struct hid_usage *usage, __s32 value,
+				bool first_packet)
 {
 	struct mt_device *td = hid_get_drvdata(hid);
+	__s32 cls = td->mtclass.name;
 	__s32 quirks = td->mtclass.quirks;
 	struct input_dev *input = field->hidinput->input;
 
@@ -794,6 +796,15 @@ static void mt_process_mt_event(struct hid_device *hid, struct hid_field *field,
 			break;
 
 		default:
+			/*
+			 * For Win8 PTP touchpads we should only look at
+			 * non finger/touch events in the first_packet of
+			 * a (possible) multi-packet frame.
+			 */
+			if ((cls == MT_CLS_WIN_8 || cls == MT_CLS_WIN_8_DUAL) &&
+			    !first_packet)
+				return;
+
 			if (usage->type)
 				input_event(input, usage->type, usage->code,
 						value);
@@ -813,6 +824,7 @@ static void mt_touch_report(struct hid_device *hid, struct hid_report *report)
 {
 	struct mt_device *td = hid_get_drvdata(hid);
 	struct hid_field *field;
+	bool first_packet;
 	unsigned count;
 	int r, n;
 
@@ -831,6 +843,7 @@ static void mt_touch_report(struct hid_device *hid, struct hid_report *report)
 			td->num_expected = value;
 	}
 
+	first_packet = td->num_received == 0;
 	for (r = 0; r < report->maxfield; r++) {
 		field = report->field[r];
 		count = field->report_count;
@@ -840,7 +853,7 @@ static void mt_touch_report(struct hid_device *hid, struct hid_report *report)
 
 		for (n = 0; n < count; n++)
 			mt_process_mt_event(hid, field, &field->usage[n],
-					field->value[n]);
+					    field->value[n], first_packet);
 	}
 
 	if (td->num_received >= td->num_expected)
-- 
2.14.1

[PATCH AUTOSEL for 4.14 05/84] HID: elo: clear BTN_LEFT mapping

[Sasha Levin]

From: Jiri Kosina <jkosina@suse.cz>

[ Upstream commit 9abd04af951e5734c9d5cfee9b49790844b734cf ]

ELO devices have one Button usage in GenDesk field, which makes hid-input map
it to BTN_LEFT; that confuses userspace, which then considers the device to be
a mouse/touchpad instead of touchscreen.

Fix that by unmapping BTN_LEFT and keeping only BTN_TOUCH in place.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/hid/hid-elo.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/hid/hid-elo.c b/drivers/hid/hid-elo.c
index 0cd4f7216239..5eea6fe0d7bd 100644
--- a/drivers/hid/hid-elo.c
+++ b/drivers/hid/hid-elo.c
@@ -42,6 +42,12 @@ static int elo_input_configured(struct hid_device *hdev,
 {
 	struct input_dev *input = hidinput->input;
 
+	/*
+	 * ELO devices have one Button usage in GenDesk field, which makes
+	 * hid-input map it to BTN_LEFT; that confuses userspace, which then
+	 * considers the device to be a mouse/touchpad instead of touchscreen.
+	 */
+	clear_bit(BTN_LEFT, input->keybit);
 	set_bit(BTN_TOUCH, input->keybit);
 	set_bit(ABS_PRESSURE, input->absbit);
 	input_set_abs_params(input, ABS_PRESSURE, 0, 256, 0, 0);
-- 
2.14.1

[PATCH AUTOSEL for 4.14 06/84] iwlwifi: mvm: rs: don't override the rate history in the search cycle

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit 992172e3aec19e5b0ea5b757ba40a146b9282d1e ]

When we are in a search cycle, we try different combinations
of parameters. Those combinations are called 'columns'.
When we switch to a new column, we first need to check if
this column has a suitable rate, if not, we can't try it.
This means we must not erase the statistics we gathered
for the previous column until we are sure that we are
indeed switching column.

The code that tries to switch to a new column first sets
a whole bunch of things for the new column, and only then
checks that we can find suitable rates in that column.
While doing that, the code mistakenly erased the rate
statistics. This code was right until
struct iwl_scale_tbl_info grew up for TPC.

Fix this to make sure we don't erase the rate statistics
until we are sure that we can indeed switch to the new
column.

Note that this bug is really harmless since it causes a
change in the behavior only when we can't find any rate
in the new column which should really not happen. In the
case we do find a suitable we reset the rate statistics
a few lines later anyway.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
index 0fe723ca844e..d22cef7381ba 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
@@ -1881,12 +1881,10 @@ static int rs_switch_to_column(struct iwl_mvm *mvm,
 	struct rs_rate *rate = &search_tbl->rate;
 	const struct rs_tx_column *column = &rs_tx_columns[col_id];
 	const struct rs_tx_column *curr_column = &rs_tx_columns[tbl->column];
-	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
-		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
 	unsigned long rate_mask = 0;
 	u32 rate_idx = 0;
 
-	memcpy(search_tbl, tbl, sz);
+	memcpy(search_tbl, tbl, offsetof(struct iwl_scale_tbl_info, win));
 
 	rate->sgi = column->sgi;
 	rate->ant = column->ant;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 07/84] ARM: dts: koelsch: Move cec_clock to root node

[Sasha Levin]

From: Simon Horman <horms+renesas@verge.net.au>

[ Upstream commit d72f4f03854d1225c72d682bf0e01377e7016419 ]

cec-clock is a fixed clock generator that is not controlled by i2c5 and
thus should not be a child of the i2c5 bus node. Rather, it should be
a child of the root node of the DT.

Fixes: 02a5ab18d366 ("ARM: dts: koelsch: Add CEC clock for HDMI transmitter")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 0ce0b278e1cb..25c3a10d669c 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -278,6 +278,12 @@
 		};
 	};
 
+	cec_clock: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -642,12 +648,6 @@
 		};
 	};
 
-	cec_clock: cec-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-	};
-
 	hdmi@39 {
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 08/84] clk: meson: gxbb: fix wrong clock for SARADC/SANA

[Sasha Levin]

From: Yixun Lan <yixun.lan@amlogic.com>

[ Upstream commit 75eccf5ed83250c0aeaeeb76f7288254ac0a87b4 ]

According to the datasheet, in Meson-GXBB/GXL series,
The clock gate bit for SARADC is HHI_GCLK_MPEG2 bit[22],
while clock gate bit for SANA is HHI_GCLK_MPEG0 bit[10].

Test passed at gxl-s905x-p212 board.

The following published datasheets are wrong and should be updated
[1] GXBB v1.1.4
[2] GXL v0.3_20170314

Fixes: 738f66d3211d ("clk: gxbb: add AmLogic GXBB clk controller driver")
Tested-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/meson/gxbb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index b2d1e8ed7152..92168348ffa6 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -1139,7 +1139,7 @@ static MESON_GATE(gxbb_pl301, HHI_GCLK_MPEG0, 6);
 static MESON_GATE(gxbb_periphs, HHI_GCLK_MPEG0, 7);
 static MESON_GATE(gxbb_spicc, HHI_GCLK_MPEG0, 8);
 static MESON_GATE(gxbb_i2c, HHI_GCLK_MPEG0, 9);
-static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG0, 10);
+static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG0, 10);
 static MESON_GATE(gxbb_smart_card, HHI_GCLK_MPEG0, 11);
 static MESON_GATE(gxbb_rng0, HHI_GCLK_MPEG0, 12);
 static MESON_GATE(gxbb_uart0, HHI_GCLK_MPEG0, 13);
@@ -1190,7 +1190,7 @@ static MESON_GATE(gxbb_usb0_ddr_bridge, HHI_GCLK_MPEG2, 9);
 static MESON_GATE(gxbb_mmc_pclk, HHI_GCLK_MPEG2, 11);
 static MESON_GATE(gxbb_dvin, HHI_GCLK_MPEG2, 12);
 static MESON_GATE(gxbb_uart2, HHI_GCLK_MPEG2, 15);
-static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG2, 22);
+static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG2, 22);
 static MESON_GATE(gxbb_vpu_intr, HHI_GCLK_MPEG2, 25);
 static MESON_GATE(gxbb_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
 static MESON_GATE(gxbb_clk81_a53, HHI_GCLK_MPEG2, 29);
-- 
2.14.1

[PATCH AUTOSEL for 4.14 10/84] drm/amdgpu: fix get_max_engine_clock_in_mhz

[Sasha Levin]

From: Felix Kuehling <Felix.Kuehling@amd.com>

[ Upstream commit a9efcc19161e20623c285fac967a32842972cebe ]

Use proper powerplay function. This fixes OpenCL initialization
problems.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
index 5432af39a674..f7fa7675215c 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
@@ -265,6 +265,9 @@ uint32_t get_max_engine_clock_in_mhz(struct kgd_dev *kgd)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)kgd;
 
-	/* The sclk is in quantas of 10kHz */
-	return adev->pm.dpm.dyn_state.max_clock_voltage_on_ac.sclk / 100;
+	/* the sclk is in quantas of 10kHz */
+	if (amdgpu_sriov_vf(adev))
+		return adev->clock.default_sclk / 100;
+
+	return amdgpu_dpm_get_sclk(adev, false) / 100;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.14 09/84] ARM: dts: exynos: Correct Trats2 panel reset line

[Sasha Levin]

From: Simon Shields <simon@lineageos.org>

[ Upstream commit 1b377924841df1e13ab5b225be3a83f807a92b52 ]

Trats2 uses gpf2-1 as the panel reset GPIO. gpy4-5 was only used
on early revisions of the board.

Fixes: 420ae8451a22 ("ARM: dts: exynos4412-trats2: add panel node")
Signed-off-by: Simon Shields <simon@lineageos.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/exynos4412-trats2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index bceb919ac637..65602cd51a4e 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -395,7 +395,7 @@
 		reg = <0>;
 		vdd3-supply = <&lcd_vdd3_reg>;
 		vci-supply = <&ldo25_reg>;
-		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
 		power-on-delay= <50>;
 		reset-delay = <100>;
 		init-delay = <100>;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 12/84] typec: tcpm: fusb302: Resolve out of order messaging events

[Sasha Levin]

From: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>

[ Upstream commit ab69f61321140ff632d560775bc226259a78dfa2 ]

The expectation in the FUSB302 driver is that a TX_SUCCESS event
should occur after a message has been sent, but before a GCRCSENT
event is raised to indicate successful receipt of a message from
the partner. However in some circumstances it is possible to see
the hardware raise a GCRCSENT event before a TX_SUCCESS event
is raised. The upshot of this is that the GCRCSENT handling portion
of code ends up reporting the GoodCRC message to TCPM because the
TX_SUCCESS event hasn't yet arrived to trigger a consumption of it.
When TX_SUCCESS is then raised by the chip it ends up consuming the
actual message that was meant for TCPM, and this incorrect sequence
results in a hard reset from TCPM.

To avoid this problem, this commit updates the message reading
code to check whether a GoodCRC message was received or not. Based
on this check it will either report that the previous transmission
has completed or it will pass the msg data to TCPM for futher
processing. This way the incorrect ordering of the events no longer
matters.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/staging/typec/fusb302/fusb302.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c
index fc6a3cf74eb3..7d9f25db1add 100644
--- a/drivers/staging/typec/fusb302/fusb302.c
+++ b/drivers/staging/typec/fusb302/fusb302.c
@@ -1552,6 +1552,21 @@ static int fusb302_pd_read_message(struct fusb302_chip *chip,
 	fusb302_log(chip, "PD message header: %x", msg->header);
 	fusb302_log(chip, "PD message len: %d", len);
 
+	/*
+	 * Check if we've read off a GoodCRC message. If so then indicate to
+	 * TCPM that the previous transmission has completed. Otherwise we pass
+	 * the received message over to TCPM for processing.
+	 *
+	 * We make this check here instead of basing the reporting decision on
+	 * the IRQ event type, as it's possible for the chip to report the
+	 * TX_SUCCESS and GCRCSENT events out of order on occasion, so we need
+	 * to check the message type to ensure correct reporting to TCPM.
+	 */
+	if ((!len) && (pd_header_type_le(msg->header) == PD_CTRL_GOOD_CRC))
+		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
+	else
+		tcpm_pd_receive(chip->tcpm_port, msg);
+
 	return ret;
 }
 
@@ -1659,13 +1674,12 @@ static irqreturn_t fusb302_irq_intn(int irq, void *dev_id)
 
 	if (interrupta & FUSB_REG_INTERRUPTA_TX_SUCCESS) {
 		fusb302_log(chip, "IRQ: PD tx success");
-		/* read out the received good CRC */
 		ret = fusb302_pd_read_message(chip, &pd_msg);
 		if (ret < 0) {
-			fusb302_log(chip, "cannot read in GCRC, ret=%d", ret);
+			fusb302_log(chip,
+				    "cannot read in PD message, ret=%d", ret);
 			goto done;
 		}
-		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
 	}
 
 	if (interrupta & FUSB_REG_INTERRUPTA_HARDRESET) {
@@ -1686,7 +1700,6 @@ static irqreturn_t fusb302_irq_intn(int irq, void *dev_id)
 				    "cannot read in PD message, ret=%d", ret);
 			goto done;
 		}
-		tcpm_pd_receive(chip->tcpm_port, &pd_msg);
 	}
 done:
 	mutex_unlock(&chip->lock);
-- 
2.14.1

[PATCH AUTOSEL for 4.14 11/84] staging: rtl8822be: fix missing null check on dev_alloc_skb return

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 3eb23426e1749a0483bc4c9b18e51f657569e3ed ]

dev_alloc_skb can potentially return NULL, so add a null check to
avoid a null pointer dereference on skb

Detected by CoverityScan, CID#1454558 ("Dereference on null return")

Fixes: 7e5b796cde7e ("staging: r8822be: Add the driver code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/staging/rtlwifi/rtl8822be/fw.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/rtlwifi/rtl8822be/fw.c b/drivers/staging/rtlwifi/rtl8822be/fw.c
index a2cc54866e79..acabb2470d55 100644
--- a/drivers/staging/rtlwifi/rtl8822be/fw.c
+++ b/drivers/staging/rtlwifi/rtl8822be/fw.c
@@ -464,6 +464,8 @@ bool rtl8822b_halmac_cb_write_data_rsvd_page(struct rtl_priv *rtlpriv, u8 *buf,
 	int count;
 
 	skb = dev_alloc_skb(size);
+	if (!skb)
+		return false;
 	memcpy((u8 *)skb_put(skb, size), buf, size);
 
 	if (!_rtl8822be_send_bcn_or_cmd_packet(rtlpriv->hw, skb, BEACON_QUEUE))
-- 
2.14.1

[PATCH AUTOSEL for 4.14 13/84] USB: ledtrig-usbport: fix of-node leak

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 03310a15484ab6a8f6d91bbf7fe486b17275c09a ]

This code looks up a USB device node from a given parent USB device but
never dropped its reference to the returned node.

As only the address of the node is used for a later matching, the
reference can be dropped immediately.

Note that this trigger implementation confuses the description of the
USB device connected to a port with the port itself (which does not have
a device-tree representation).

Fixes: 4f04c210d031 ("usb: core: read USB ports from DT in the usbport LED trigger driver")
Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/usb/core/ledtrig-usbport.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/core/ledtrig-usbport.c b/drivers/usb/core/ledtrig-usbport.c
index 1af877942110..2de0444c95a8 100644
--- a/drivers/usb/core/ledtrig-usbport.c
+++ b/drivers/usb/core/ledtrig-usbport.c
@@ -140,11 +140,17 @@ static bool usbport_trig_port_observed(struct usbport_trig_data *usbport_data,
 	if (!led_np)
 		return false;
 
-	/* Get node of port being added */
+	/*
+	 * Get node of port being added
+	 *
+	 * FIXME: This is really the device node of the connected device
+	 */
 	port_np = usb_of_get_child_node(usb_dev->dev.of_node, port1);
 	if (!port_np)
 		return false;
 
+	of_node_put(port_np);
+
 	/* Amount of trigger sources for this LED */
 	count = of_count_phandle_with_args(led_np, "trigger-sources",
 					   "#trigger-source-cells");
-- 
2.14.1

[PATCH AUTOSEL for 4.14 15/84] sched: Stop resched_cpu() from sending IPIs to offline CPUs

[Sasha Levin]

From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>

[ Upstream commit a0982dfa03efca6c239c52cabebcea4afb93ea6b ]

The rcutorture test suite occasionally provokes a splat due to invoking
resched_cpu() on an offline CPU:

WARNING: CPU: 2 PID: 8 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40
Modules linked in:
CPU: 2 PID: 8 Comm: rcu_preempt Not tainted 4.14.0-rc4+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
task: ffff902ede9daf00 task.stack: ffff96c50010c000
RIP: 0010:native_smp_send_reschedule+0x37/0x40
RSP: 0018:ffff96c50010fdb8 EFLAGS: 00010096
RAX: 000000000000002e RBX: ffff902edaab4680 RCX: 0000000000000003
RDX: 0000000080000003 RSI: 0000000000000000 RDI: 00000000ffffffff
RBP: ffff96c50010fdb8 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 00000000299f36ae R12: 0000000000000001
R13: ffffffff9de64240 R14: 0000000000000001 R15: ffffffff9de64240
FS:  0000000000000000(0000) GS:ffff902edfc80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000f7d4c642 CR3: 000000001e0e2000 CR4: 00000000000006e0
Call Trace:
 resched_curr+0x8f/0x1c0
 resched_cpu+0x2c/0x40
 rcu_implicit_dynticks_qs+0x152/0x220
 force_qs_rnp+0x147/0x1d0
 ? sync_rcu_exp_select_cpus+0x450/0x450
 rcu_gp_kthread+0x5a9/0x950
 kthread+0x142/0x180
 ? force_qs_rnp+0x1d0/0x1d0
 ? kthread_create_on_node+0x40/0x40
 ret_from_fork+0x27/0x40
Code: 14 01 0f 92 c0 84 c0 74 14 48 8b 05 14 4f f4 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 38 89 ca 9d e8 e5 56 08 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 52 9e 37 02 85 c0 75 38 55 48
---[ end trace 26df9e5df4bba4ac ]---

This splat cannot be generated by expedited grace periods because they
always invoke resched_cpu() on the current CPU, which is good because
expedited grace periods require that resched_cpu() unconditionally
succeed.  However, other parts of RCU can tolerate resched_cpu() acting
as a no-op, at least as long as it doesn't happen too often.

This commit therefore makes resched_cpu() invoke resched_curr() only if
the CPU is either online or is the current CPU.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/sched/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 55062461b2fd..8cf36b30a006 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -506,7 +506,8 @@ void resched_cpu(int cpu)
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&rq->lock, flags);
-	resched_curr(rq);
+	if (cpu_online(cpu) || cpu == smp_processor_id())
+		resched_curr(rq);
 	raw_spin_unlock_irqrestore(&rq->lock, flags);
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 14/84] sched: Stop switched_to_rt() from sending IPIs to offline CPUs

[Sasha Levin]

From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>

[ Upstream commit 2fe2582649aa2355f79acddb86bd4d6c5363eb63 ]

The rcutorture test suite occasionally provokes a splat due to invoking
rt_mutex_lock() which needs to boost the priority of a task currently
sitting on a runqueue that belongs to an offline CPU:

WARNING: CPU: 0 PID: 12 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40
Modules linked in:
CPU: 0 PID: 12 Comm: rcub/7 Not tainted 4.14.0-rc4+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
task: ffff9ed3de5f8cc0 task.stack: ffffbbf80012c000
RIP: 0010:native_smp_send_reschedule+0x37/0x40
RSP: 0018:ffffbbf80012fd10 EFLAGS: 00010082
RAX: 000000000000002f RBX: ffff9ed3dd9cb300 RCX: 0000000000000004
RDX: 0000000080000004 RSI: 0000000000000086 RDI: 00000000ffffffff
RBP: ffffbbf80012fd10 R08: 000000000009da7a R09: 0000000000007b9d
R10: 0000000000000001 R11: ffffffffbb57c2cd R12: 000000000000000d
R13: ffff9ed3de5f8cc0 R14: 0000000000000061 R15: ffff9ed3ded59200
FS:  0000000000000000(0000) GS:ffff9ed3dea00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000080686f0 CR3: 000000001b9e0000 CR4: 00000000000006f0
Call Trace:
 resched_curr+0x61/0xd0
 switched_to_rt+0x8f/0xa0
 rt_mutex_setprio+0x25c/0x410
 task_blocks_on_rt_mutex+0x1b3/0x1f0
 rt_mutex_slowlock+0xa9/0x1e0
 rt_mutex_lock+0x29/0x30
 rcu_boost_kthread+0x127/0x3c0
 kthread+0x104/0x140
 ? rcu_report_unblock_qs_rnp+0x90/0x90
 ? kthread_create_on_node+0x40/0x40
 ret_from_fork+0x22/0x30
Code: f0 00 0f 92 c0 84 c0 74 14 48 8b 05 34 74 c5 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 a0 c6 fc b9 e8 d5 b5 06 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 a2 d1 13 02 85 c0 75 38 55 48

But the target task's priority has already been adjusted, so the only
purpose of switched_to_rt() invoking resched_curr() is to wake up the
CPU running some task that needs to be preempted by the boosted task.
But the CPU is offline, which presumably means that the task must be
migrated to some other CPU, and that this other CPU will undertake any
needed preemption at the time of migration.  Because the runqueue lock
is held when resched_curr() is invoked, we know that the boosted task
cannot go anywhere, so it is not necessary to invoke resched_curr()
in this particular case.

This commit therefore makes switched_to_rt() refrain from invoking
resched_curr() when the target CPU is offline.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/sched/rt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index 298f62b8662d..470a0c9e93de 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -2218,7 +2218,7 @@ static void switched_to_rt(struct rq *rq, struct task_struct *p)
 		if (p->nr_cpus_allowed > 1 && rq->rt.overloaded)
 			queue_push_tasks(rq);
 #endif /* CONFIG_SMP */
-		if (p->prio < rq->curr->prio)
+		if (p->prio < rq->curr->prio && cpu_online(cpu_of(rq)))
 			resched_curr(rq);
 	}
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.14 16/84] crypto: ecc - Fix NULL pointer deref. on no default_rng

[Sasha Levin]

From: Pierre <pinaraf@pinaraf.info>

[ Upstream commit 4c0e22c90510308433272d7ba281b1eb4eda8209 ]

If crypto_get_default_rng returns an error, the
function ecc_gen_privkey should return an error.
Instead, it currently tries to use the default_rng
nevertheless, thus creating a kernel panic with a
NULL pointer dereference.
Returning the error directly, as was supposedly
intended when looking at the code, fixes this.

Signed-off-by: Pierre Ducroquet <pinaraf@pinaraf.info>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 crypto/ecc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/crypto/ecc.c b/crypto/ecc.c
index 633a9bcdc574..18f32f2a5e1c 100644
--- a/crypto/ecc.c
+++ b/crypto/ecc.c
@@ -964,7 +964,7 @@ int ecc_gen_privkey(unsigned int curve_id, unsigned int ndigits, u64 *privkey)
 	 * DRBG with a security strength of 256.
 	 */
 	if (crypto_get_default_rng())
-		err = -EFAULT;
+		return -EFAULT;
 
 	err = crypto_rng_get_bytes(crypto_default_rng, (u8 *)priv, nbytes);
 	crypto_put_default_rng();
-- 
2.14.1

[PATCH AUTOSEL for 4.14 17/84] crypto: cavium - fix memory leak on info

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 87aae50af730a28dc1d8846d86dca5e9aa724a9f ]

The object info is being leaked on an error return path, fix this
by setting ret to -ENOMEM and exiting via the request_cleanup path
that will free info.

Detected by CoverityScan, CID#1408439 ("Resource Leak")

Fixes: c694b233295b ("crypto: cavium - Add the Virtual Function driver for CPT")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/crypto/cavium/cpt/cptvf_reqmanager.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/cavium/cpt/cptvf_reqmanager.c b/drivers/crypto/cavium/cpt/cptvf_reqmanager.c
index 169e66231bcf..b0ba4331944b 100644
--- a/drivers/crypto/cavium/cpt/cptvf_reqmanager.c
+++ b/drivers/crypto/cavium/cpt/cptvf_reqmanager.c
@@ -459,7 +459,8 @@ int process_request(struct cpt_vf *cptvf, struct cpt_request_info *req)
 	info->completion_addr = kzalloc(sizeof(union cpt_res_s), GFP_KERNEL);
 	if (unlikely(!info->completion_addr)) {
 		dev_err(&pdev->dev, "Unable to allocate memory for completion_addr\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto request_cleanup;
 	}
 
 	result = (union cpt_res_s *)info->completion_addr;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 18/84] test_firmware: fix setting old custom fw path back on exit

[Sasha Levin]

From: "Luis R. Rodriguez" <mcgrof@kernel.org>

[ Upstream commit 65c79230576873b312c3599479c1e42355c9f349 ]

The file /sys/module/firmware_class/parameters/path can be used
to set a custom firmware path. The fw_filesystem.sh script creates
a temporary directory to add a test firmware file to be used during
testing, in order for this to work it uses the custom path syfs file
and it was supposed to reset back the file on execution exit. The
script failed to do this due to a typo, it was using OLD_PATH instead
of OLD_FWPATH, since its inception since v3.17.

Its not as easy to just keep the old setting, it turns out that
resetting an empty setting won't actually do what we want, we need
to check if it was empty and set an empty space.

Without this we end up having the temporary path always set after
we run these tests.

Fixes: 0a8adf58475 ("test: add firmware_class loader test")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/testing/selftests/firmware/fw_filesystem.sh | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh
index 62f2d6f54929..13ade39fe832 100755
--- a/tools/testing/selftests/firmware/fw_filesystem.sh
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -45,7 +45,10 @@ test_finish()
 	if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
 		echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
 	fi
-	echo -n "$OLD_PATH" >/sys/module/firmware_class/parameters/path
+	if [ "$OLD_FWPATH" = "" ]; then
+		OLD_FWPATH=" "
+	fi
+	echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path
 	rm -f "$FW"
 	rmdir "$FWPATH"
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.14 19/84] ASoC: fsl_ssi: only enable proper channel slots in AC'97 mode

[Sasha Levin]

From: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>

[ Upstream commit 01ca485171e3253f3aee555437519c0d316d4b0c ]

We need to make sure that only proper channel slots (in SACCST register)
are enabled at playback start time since some AC'97 CODECs (like VT1613 on
UDOO board) were observed requesting via SLOTREQ spurious ones just after
an AC'97 link is started but before the CODEC is configured by its driver.
When a bit for some channel slot is set in a SLOTREQ request then SSI sets
the relevant bit in SACCST automatically, which then 'sticks' until it is
manually unset.
The SACCST register is not writable directly, we have to use SACCDIS and
SACCEN registers to configure it instead (these aren't normal registers:
writing a '1' bit at some position in SACCEN sets the relevant bit in
SACCST; SACCDIS operates in a similar way but allows unsetting bits in
SACCST).

Theoretically, this should be necessary only for the very first playback
but since some CODECs are so untrustworthy and extra channel slots enabled
mean ruined playback let's play safe here and make sure that no extra
slots are enabled in SACCST every time a playback is started.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/fsl/fsl_ssi.c | 52 +++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 46 insertions(+), 6 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 3ffbb498cc70..6cdcb9f2d54b 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -572,8 +572,54 @@ static void fsl_ssi_rx_config(struct fsl_ssi_private *ssi_private, bool enable)
 	fsl_ssi_config(ssi_private, enable, &ssi_private->rxtx_reg_val.rx);
 }
 
+static void fsl_ssi_tx_ac97_saccst_setup(struct fsl_ssi_private *ssi_private)
+{
+	struct regmap *regs = ssi_private->regs;
+
+	/* no SACC{ST,EN,DIS} regs on imx21-class SSI */
+	if (!ssi_private->soc->imx21regs) {
+		/*
+		 * Note that these below aren't just normal registers.
+		 * They are a way to disable or enable bits in SACCST
+		 * register:
+		 * - writing a '1' bit at some position in SACCEN sets the
+		 * relevant bit in SACCST,
+		 * - writing a '1' bit at some position in SACCDIS unsets
+		 * the relevant bit in SACCST register.
+		 *
+		 * The two writes below first disable all channels slots,
+		 * then enable just slots 3 & 4 ("PCM Playback Left Channel"
+		 * and "PCM Playback Right Channel").
+		 */
+		regmap_write(regs, CCSR_SSI_SACCDIS, 0xff);
+		regmap_write(regs, CCSR_SSI_SACCEN, 0x300);
+	}
+}
+
 static void fsl_ssi_tx_config(struct fsl_ssi_private *ssi_private, bool enable)
 {
+	/*
+	 * Why are we setting up SACCST everytime we are starting a
+	 * playback?
+	 * Some CODECs (like VT1613 CODEC on UDOO board) like to
+	 * (sometimes) set extra bits in their SLOTREQ requests.
+	 * When a bit is set in a SLOTREQ request then SSI sets the
+	 * relevant bit in SACCST automatically (it is enough if a bit was
+	 * set in a SLOTREQ just once, bits in SACCST are 'sticky').
+	 * If an extra slot gets enabled that's a disaster for playback
+	 * because some of normal left or right channel samples are
+	 * redirected instead to this extra slot.
+	 *
+	 * A workaround implemented in fsl-asoc-card of setting an
+	 * appropriate CODEC register so that slots 3 & 4 (the normal
+	 * stereo playback slots) are used for S/PDIF seems to mostly fix
+	 * this issue on the UDOO board but since this CODEC is so
+	 * untrustworthy let's play safe here and make sure that no extra
+	 * slots are enabled every time a playback is started.
+	 */
+	if (enable && fsl_ssi_is_ac97(ssi_private))
+		fsl_ssi_tx_ac97_saccst_setup(ssi_private);
+
 	fsl_ssi_config(ssi_private, enable, &ssi_private->rxtx_reg_val.tx);
 }
 
@@ -630,12 +676,6 @@ static void fsl_ssi_setup_ac97(struct fsl_ssi_private *ssi_private)
 	regmap_write(regs, CCSR_SSI_SACNT,
 			CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV);
 
-	/* no SACC{ST,EN,DIS} regs on imx21-class SSI */
-	if (!ssi_private->soc->imx21regs) {
-		regmap_write(regs, CCSR_SSI_SACCDIS, 0xff);
-		regmap_write(regs, CCSR_SSI_SACCEN, 0x300);
-	}
-
 	/*
 	 * Enable SSI, Transmit and Receive. AC97 has to communicate with the
 	 * codec before a stream is started.
-- 
2.14.1

[PATCH AUTOSEL for 4.14 20/84] net: ieee802154: adf7242: Fix bug if defined DEBUG

[Sasha Levin]

From: Michael Hennerich <michael.hennerich@analog.com>

[ Upstream commit 388b3b2b03701f3b3c10975c272892d7f78080df ]

This fixes undefined reference to struct adf7242_local *lp in
case DEBUG is defined.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ieee802154/adf7242.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c
index 3e4c8b21403c..46b42de13d76 100644
--- a/drivers/net/ieee802154/adf7242.c
+++ b/drivers/net/ieee802154/adf7242.c
@@ -888,7 +888,7 @@ static const struct ieee802154_ops adf7242_ops = {
 	.set_cca_ed_level = adf7242_set_cca_ed_level,
 };
 
-static void adf7242_debug(u8 irq1)
+static void adf7242_debug(struct adf7242_local *lp, u8 irq1)
 {
 #ifdef DEBUG
 	u8 stat;
@@ -932,7 +932,7 @@ static irqreturn_t adf7242_isr(int irq, void *data)
 		dev_err(&lp->spi->dev, "%s :ERROR IRQ1 = 0x%X\n",
 			__func__, irq1);
 
-	adf7242_debug(irq1);
+	adf7242_debug(lp, irq1);
 
 	xmit = test_bit(FLAG_XMIT, &lp->flags);
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 21/84] rtc: brcmstb-waketimer: fix error handling in brcmstb_waketmr_probe()

[Sasha Levin]

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

[ Upstream commit f2eef045de9defbc6fc6b72b17f0941cbe26c81d ]

brcmstb_waketmr_probe() does not disable timer->clk on error paths.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: c4f07ecee22e ("rtc: brcmstb-waketimer: Add Broadcom STB wake-timer")
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/rtc/rtc-brcmstb-waketimer.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/rtc/rtc-brcmstb-waketimer.c b/drivers/rtc/rtc-brcmstb-waketimer.c
index 796ac792a381..6cee61201c30 100644
--- a/drivers/rtc/rtc-brcmstb-waketimer.c
+++ b/drivers/rtc/rtc-brcmstb-waketimer.c
@@ -253,7 +253,7 @@ static int brcmstb_waketmr_probe(struct platform_device *pdev)
 	ret = devm_request_irq(dev, timer->irq, brcmstb_waketmr_irq, 0,
 			       "brcmstb-waketimer", timer);
 	if (ret < 0)
-		return ret;
+		goto err_clk;
 
 	timer->reboot_notifier.notifier_call = brcmstb_waketmr_reboot;
 	register_reboot_notifier(&timer->reboot_notifier);
@@ -262,12 +262,21 @@ static int brcmstb_waketmr_probe(struct platform_device *pdev)
 					 &brcmstb_waketmr_ops, THIS_MODULE);
 	if (IS_ERR(timer->rtc)) {
 		dev_err(dev, "unable to register device\n");
-		unregister_reboot_notifier(&timer->reboot_notifier);
-		return PTR_ERR(timer->rtc);
+		ret = PTR_ERR(timer->rtc);
+		goto err_notifier;
 	}
 
 	dev_info(dev, "registered, with irq %d\n", timer->irq);
 
+	return 0;
+
+err_notifier:
+	unregister_reboot_notifier(&timer->reboot_notifier);
+
+err_clk:
+	if (timer->clk)
+		clk_disable_unprepare(timer->clk);
+
 	return ret;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 22/84] net: xfrm: allow clearing socket xfrm policies.

[Sasha Levin]

From: Lorenzo Colitti <lorenzo@google.com>

[ Upstream commit be8f8284cd897af2482d4e54fbc2bdfc15557259 ]

Currently it is possible to add or update socket policies, but
not clear them. Therefore, once a socket policy has been applied,
the socket cannot be used for unencrypted traffic.

This patch allows (privileged) users to clear socket policies by
passing in a NULL pointer and zero length argument to the
{IP,IPV6}_{IPSEC,XFRM}_POLICY setsockopts. This results in both
the incoming and outgoing policies being cleared.

The simple approach taken in this patch cannot clear socket
policies in only one direction. If desired this could be added
in the future, for example by continuing to pass in a length of
zero (which currently is guaranteed to return EMSGSIZE) and
making the policy be a pointer to an integer that contains one
of the XFRM_POLICY_{IN,OUT} enum values.

An alternative would have been to interpret the length as a
signed integer and use XFRM_POLICY_IN (i.e., 0) to clear the
input policy and -XFRM_POLICY_OUT (i.e., -1) to clear the output
policy.

Tested: https://android-review.googlesource.com/539816
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/xfrm/xfrm_policy.c | 2 +-
 net/xfrm/xfrm_state.c  | 7 +++++++
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 22f5da66357b..7d17c207fc8a 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1257,7 +1257,7 @@ EXPORT_SYMBOL(xfrm_policy_delete);
 
 int xfrm_sk_policy_insert(struct sock *sk, int dir, struct xfrm_policy *pol)
 {
-	struct net *net = xp_net(pol);
+	struct net *net = sock_net(sk);
 	struct xfrm_policy *old_pol;
 
 #ifdef CONFIG_XFRM_SUB_POLICY
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 58be0e7f4c7d..bab20c626943 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -2050,6 +2050,13 @@ int xfrm_user_policy(struct sock *sk, int optname, u8 __user *optval, int optlen
 	struct xfrm_mgr *km;
 	struct xfrm_policy *pol = NULL;
 
+	if (!optval && !optlen) {
+		xfrm_sk_policy_insert(sk, XFRM_POLICY_IN, NULL);
+		xfrm_sk_policy_insert(sk, XFRM_POLICY_OUT, NULL);
+		__sk_dst_reset(sk);
+		return 0;
+	}
+
 	if (optlen <= 0 || optlen > PAGE_SIZE)
 		return -EMSGSIZE;
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 24/84] net: thunderx: Set max queue count taking XDP_TX into account

[Sasha Levin]

From: Sunil Goutham <sgoutham@cavium.com>

[ Upstream commit 87de083857aa269fb171ef0b39696b2888361c58 ]

on T81 there are only 4 cores, hence setting max queue count to 4
would leave nothing for XDP_TX. This patch fixes this by doubling
max queue count in above scenarios.

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: cjacob <cjacob@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/cavium/thunder/nicvf_main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
index 805ab45e9b5a..2237ef8e4344 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
@@ -1832,6 +1832,11 @@ static int nicvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	nic->pdev = pdev;
 	nic->pnicvf = nic;
 	nic->max_queues = qcount;
+	/* If no of CPUs are too low, there won't be any queues left
+	 * for XDP_TX, hence double it.
+	 */
+	if (!nic->t88)
+		nic->max_queues *= 2;
 
 	/* MAP VF's configuration registers */
 	nic->reg_base = pcim_iomap(pdev, PCI_CFG_REG_BAR_NUM, 0);
-- 
2.14.1

[PATCH AUTOSEL for 4.14 23/84] mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()

[Sasha Levin]

From: Miquel Raynal <miquel.raynal@free-electrons.com>

[ Upstream commit df467899da0b71465760b4e35127bce837244eee ]

Some drivers (like nand_hynix.c) call ->cmdfunc() with NAND_CMD_NONE
and a column address and expect the controller to only send address
cycles. Right now, the default ->cmdfunc() implementations provided by
the core do not filter out the command cycle in this case and forwards
the request to the controller driver through the ->cmd_ctrl() method.
The thing is, NAND controller drivers can get this wrong and send a
command cycle with a NAND_CMD_NONE opcode and since NAND_CMD_NONE is
-1, and the command field is usually casted to an u8, we end up sending
the 0xFF command which is actually a RESET operation.

Add conditions in nand_command[_lp]() functions to sending the initial
command cycle when command == NAND_CMD_NONE.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mtd/nand/nand_base.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index a0b0302aea14..528e04f96c13 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -710,7 +710,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 		chip->cmd_ctrl(mtd, readcmd, ctrl);
 		ctrl &= ~NAND_CTRL_CHANGE;
 	}
-	chip->cmd_ctrl(mtd, command, ctrl);
+	if (command != NAND_CMD_NONE)
+		chip->cmd_ctrl(mtd, command, ctrl);
 
 	/* Address cycle, when necessary */
 	ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
@@ -739,6 +740,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 	 */
 	switch (command) {
 
+	case NAND_CMD_NONE:
 	case NAND_CMD_PAGEPROG:
 	case NAND_CMD_ERASE1:
 	case NAND_CMD_ERASE2:
@@ -832,7 +834,9 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	}
 
 	/* Command latch cycle */
-	chip->cmd_ctrl(mtd, command, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+	if (command != NAND_CMD_NONE)
+		chip->cmd_ctrl(mtd, command,
+			       NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
 
 	if (column != -1 || page_addr != -1) {
 		int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE;
@@ -868,6 +872,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	 */
 	switch (command) {
 
+	case NAND_CMD_NONE:
 	case NAND_CMD_CACHEDPROG:
 	case NAND_CMD_PAGEPROG:
 	case NAND_CMD_ERASE1:
-- 
2.14.1

[PATCH AUTOSEL for 4.14 25/84] ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin

[Sasha Levin]

From: "Andrew F. Davis" <afd@ti.com>

[ Upstream commit e153db03c6b7a035c797bcdf35262586f003ee93 ]

The correct DT property for specifying a GPIO used for reset
is "reset-gpios", fix this here.

Fixes: 4341881d0562 ("ARM: dts: Add devicetree for Gumstix Pepper board")

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/am335x-pepper.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 03c7d77023c6..9fb7426070ce 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -139,7 +139,7 @@
 &audio_codec {
 	status = "okay";
 
-	gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 	AVDD-supply = <&ldo3_reg>;
 	IOVDD-supply = <&ldo3_reg>;
 	DRVDD-supply = <&ldo3_reg>;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 27/84] mtd: nand: ifc: update bufnum mask for ver >= 2.0.0

[Sasha Levin]

From: Jagdish Gediya <jagdish.gediya@nxp.com>

[ Upstream commit bccb06c353af3764ca86d9da47652458e6c2eb41 ]

Bufnum mask is used to calculate page position in the internal SRAM.

As IFC version 2.0.0 has 16KB of internal SRAM as compared to older
versions which had 8KB. Hence bufnum mask needs to be updated.

Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mtd/nand/fsl_ifc_nand.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 9e03bac7f34c..bbdd68a54d68 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -916,6 +916,13 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 	if (ctrl->version >= FSL_IFC_VERSION_1_1_0)
 		fsl_ifc_sram_init(priv);
 
+	/*
+	 * As IFC version 2.0.0 has 16KB of internal SRAM as compared to older
+	 * versions which had 8KB. Hence bufnum mask needs to be updated.
+	 */
+	if (ctrl->version >= FSL_IFC_VERSION_2_0_0)
+		priv->bufnum_mask = (priv->bufnum_mask * 2) + 1;
+
 	return 0;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 26/84] ARM: dts: omap3-n900: Fix the audio CODEC's reset pin

[Sasha Levin]

From: "Andrew F. Davis" <afd@ti.com>

[ Upstream commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 ]

The correct DT property for specifying a GPIO used for reset
is "reset-gpios", fix this here.

Fixes: 14e3e295b2b9 ("ARM: dts: omap3-n900: Add TLV320AIC3X support")

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/omap3-n900.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 4acd32a1c4ef..c66ee8432a85 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -558,7 +558,7 @@
 	tlv320aic3x: tlv320aic3x@18 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x18>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
 		ai3x-gpio-func = <
 			0 /* AIC3X_GPIO1_FUNC_DISABLED */
 			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
@@ -575,7 +575,7 @@
 	tlv320aic3x_aux: tlv320aic3x@19 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x19>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
 
 		AVDD-supply = <&vmmc2>;
 		DRVDD-supply = <&vmmc2>;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 28/84] userns: Don't fail follow_automount based on s_user_ns

[Sasha Levin]

From: "Eric W. Biederman" <ebiederm@xmission.com>

[ Upstream commit bbc3e471011417598e598707486f5d8814ec9c01 ]

When vfs_submount was added the test to limit automounts from
filesystems that with s_user_ns != &init_user_ns accidentially left
in follow_automount.  The test was never about any security concerns
and was always about how do we implement this for filesystems whose
s_user_ns != &init_user_ns.

At the moment this check makes no difference as there are no
filesystems that both set FS_USERNS_MOUNT and implement d_automount.

Remove this check now while I am thinking about it so there will not
be odd booby traps for someone who does want to make this combination
work.

vfs_submount still needs improvements to allow this combination to work,
and vfs_submount contains a check that presents a warning.

The autofs4 filesystem could be modified to set FS_USERNS_MOUNT and it would
need not work on this code path, as userspace performs the mounts.

Fixes: 93faccbbfa95 ("fs: Better permission checking for submounts")
Fixes: aeaa4a79ff6a ("fs: Call d_automount with the filesystems creds")
Acked-by:  Ian Kent <raven@themaw.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/namei.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/fs/namei.c b/fs/namei.c
index 62a0db6e6725..cbe24e367a70 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1133,9 +1133,6 @@ static int follow_automount(struct path *path, struct nameidata *nd,
 	    path->dentry->d_inode)
 		return -EISDIR;
 
-	if (path->dentry->d_sb->s_user_ns != &init_user_ns)
-		return -EACCES;
-
 	nd->total_link_count++;
 	if (nd->total_link_count >= 40)
 		return -ELOOP;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 29/84] xfrm: Fix xfrm_replay_overflow_offload_esn

[Sasha Levin]

From: Yossef Efraim <yossefe@mellanox.com>

[ Upstream commit 0ba23a211360af7b6658e4fcfc571970bbbacc55 ]

In case of wrap around, replay_esn->oseq_hi is not updated
before it is tested for it's actual value, leading function
to fail with overflow indication and packets being dropped.

This patch updates replay_esn->oseq_hi in the right place.

Fixes: d7dbefc45cf5 ("xfrm: Add xfrm_replay_overflow functions for offloading")
Signed-off-by: Yossef Efraim <yossefe@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/xfrm/xfrm_replay.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c
index 8b23c5bcf8e8..02501817227b 100644
--- a/net/xfrm/xfrm_replay.c
+++ b/net/xfrm/xfrm_replay.c
@@ -666,7 +666,7 @@ static int xfrm_replay_overflow_offload_esn(struct xfrm_state *x, struct sk_buff
 		if (unlikely(oseq < replay_esn->oseq)) {
 			XFRM_SKB_CB(skb)->seq.output.hi = ++oseq_hi;
 			xo->seq.hi = oseq_hi;
-
+			replay_esn->oseq_hi = oseq_hi;
 			if (replay_esn->oseq_hi == 0) {
 				replay_esn->oseq--;
 				replay_esn->oseq_hi--;
@@ -678,7 +678,6 @@ static int xfrm_replay_overflow_offload_esn(struct xfrm_state *x, struct sk_buff
 		}
 
 		replay_esn->oseq = oseq;
-		replay_esn->oseq_hi = oseq_hi;
 
 		if (xfrm_aevent_is_on(net))
 			x->repl->notify(x, XFRM_REPLAY_UPDATE);
-- 
2.14.1

[PATCH AUTOSEL for 4.14 31/84] clk: ti: clkctrl: add support for retrying failed init

[Sasha Levin]

From: Tero Kristo <t-kristo@ti.com>

[ Upstream commit 729e13bf58e643b9accd2a14c55b555958702fb0 ]

In case the clkctrl node contains assigned-clock-* entries, registering
the provider can fail with -EPROBE_DEFER. In this case, add the
provider to the retry_init clock list so it will be cleaned up later.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/ti/clkctrl.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 53e71d0503ec..e7c51bea97f7 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -400,6 +400,12 @@ _ti_clkctrl_setup_subclks(struct omap_clkctrl_provider *provider,
 	}
 }
 
+static void __init _clkctrl_add_provider(void *data,
+					 struct device_node *np)
+{
+	of_clk_add_hw_provider(np, _ti_omap4_clkctrl_xlate, data);
+}
+
 static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
 {
 	struct omap_clkctrl_provider *provider;
@@ -411,6 +417,7 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
 	struct omap_clkctrl_clk *clkctrl_clk;
 	const __be32 *addrp;
 	u32 addr;
+	int ret;
 
 	addrp = of_get_address(node, 0, NULL, NULL);
 	addr = (u32)of_translate_address(node, addrp);
@@ -485,7 +492,10 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
 		reg_data++;
 	}
 
-	of_clk_add_hw_provider(node, _ti_omap4_clkctrl_xlate, provider);
+	ret = of_clk_add_hw_provider(node, _ti_omap4_clkctrl_xlate, provider);
+	if (ret == -EPROBE_DEFER)
+		ti_clk_retry_init(node, provider, _clkctrl_add_provider);
+
 	return;
 
 cleanup:
-- 
2.14.1

[PATCH AUTOSEL for 4.14 30/84] leds: pm8058: Silence pointer to integer size warning

[Sasha Levin]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

[ Upstream commit 8f52df50d9366f770a894d14ef724e5e04574e98 ]

The pointer returned by of_device_get_match_data() doesn't have the same
size as u32 on 64-bit architectures, causing a compile warning when
compile-testing the driver on such platform.

Cast the return value of of_device_get_match_data() to unsigned long and
then to u32 to silence this warning.

Fixes: 7f866986e705 ("leds: add PM8058 LEDs driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/leds/leds-pm8058.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/leds/leds-pm8058.c b/drivers/leds/leds-pm8058.c
index a52674327857..8988ba3b2d65 100644
--- a/drivers/leds/leds-pm8058.c
+++ b/drivers/leds/leds-pm8058.c
@@ -106,7 +106,7 @@ static int pm8058_led_probe(struct platform_device *pdev)
 	if (!led)
 		return -ENOMEM;
 
-	led->ledtype = (u32)of_device_get_match_data(&pdev->dev);
+	led->ledtype = (u32)(unsigned long)of_device_get_match_data(&pdev->dev);
 
 	map = dev_get_regmap(pdev->dev.parent, NULL);
 	if (!map) {
-- 
2.14.1

[PATCH AUTOSEL for 4.14 32/84] ASoC: tlv320aic31xx: Handle inverted BCLK in non-DSP modes

[Sasha Levin]

From: "Andrew F. Davis" <afd@ti.com>

[ Upstream commit dcb407b257af06fa58b0544ec01ec9e0d3927e02 ]

Currently BCLK inverting is only handled when the DAI format is
DSP, but the BCLK may be inverted in any supported mode. Without
this using this CODEC in any other mode than DSP with the BCLK
inverted leads to bad sampling timing and very poor audio quality.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/codecs/tlv320aic31xx.c | 28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c
index 54a87a905eb6..d3bd0bf15ddb 100644
--- a/sound/soc/codecs/tlv320aic31xx.c
+++ b/sound/soc/codecs/tlv320aic31xx.c
@@ -924,6 +924,18 @@ static int aic31xx_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		return -EINVAL;
 	}
 
+	/* signal polarity */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface_reg2 |= AIC31XX_BCLKINV_MASK;
+		break;
+	default:
+		dev_err(codec->dev, "Invalid DAI clock signal polarity\n");
+		return -EINVAL;
+	}
+
 	/* interface format */
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
@@ -931,16 +943,12 @@ static int aic31xx_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	case SND_SOC_DAIFMT_DSP_A:
 		dsp_a_val = 0x1;
 	case SND_SOC_DAIFMT_DSP_B:
-		/* NOTE: BCLKINV bit value 1 equas NB and 0 equals IB */
-		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-		case SND_SOC_DAIFMT_NB_NF:
-			iface_reg2 |= AIC31XX_BCLKINV_MASK;
-			break;
-		case SND_SOC_DAIFMT_IB_NF:
-			break;
-		default:
-			return -EINVAL;
-		}
+		/*
+		 * NOTE: This CODEC samples on the falling edge of BCLK in
+		 * DSP mode, this is inverted compared to what most DAIs
+		 * expect, so we invert for this mode
+		 */
+		iface_reg2 ^= AIC31XX_BCLKINV_MASK;
 		iface_reg1 |= (AIC31XX_DSP_MODE <<
 			       AIC31XX_IFACE1_DATATYPE_SHIFT);
 		break;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 34/84] power: supply: ab8500_charger: Bail out in case of error in 'ab8500_charger_init_hw_registers()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 09edcb647542487864e23aa8d2ef26be3e08978a ]

If an error occurs when we enable the backup battery charging, we should
go through the error handling path directly.

Before commit db43e6c473b5 ("ab8500-bm: Add usb power path support") this
was the case, but this commit has added some code between the last test and
the 'out' label.
So, in case of error, this added code is executed and the error may be
silently ignored.

Fix it by adding the missing 'goto out', as done in all other error
handling paths.

Fixes: db43e6c473b5 ("ab8500-bm: Add usb power path support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/power/supply/ab8500_charger.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index 1cdbe7a0738d..5a76c6d343de 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -3221,8 +3221,10 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
 	ret = abx500_mask_and_set_register_interruptible(di->dev,
 		AB8500_RTC, AB8500_RTC_CTRL_REG,
 		RTC_BUP_CH_ENA, RTC_BUP_CH_ENA);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_err(di->dev, "%s mask and set failed\n", __func__);
+		goto out;
+	}
 
 	if (is_ab8540(di->parent)) {
 		ret = abx500_mask_and_set_register_interruptible(di->dev,
-- 
2.14.1

[PATCH AUTOSEL for 4.14 33/84] power: supply: ab8500_charger: Fix an error handling path

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit bf59fddde1c3eab89eb8dca8f3d3dc097887d2bb ]

'ret' is know to be 0 at this point, because it has not been updated by the
the previous call to 'abx500_mask_and_set_register_interruptible()'.

Fix it by updating 'ret' before checking if an error occurred.

Fixes: 84edbeeab67c ("ab8500-charger: AB8500 charger driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/power/supply/ab8500_charger.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index 4ebbcce45c48..1cdbe7a0738d 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -3218,7 +3218,7 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
 	}
 
 	/* Enable backup battery charging */
-	abx500_mask_and_set_register_interruptible(di->dev,
+	ret = abx500_mask_and_set_register_interruptible(di->dev,
 		AB8500_RTC, AB8500_RTC_CTRL_REG,
 		RTC_BUP_CH_ENA, RTC_BUP_CH_ENA);
 	if (ret < 0)
-- 
2.14.1

[PATCH AUTOSEL for 4.14 36/84] iio: adc: ina2xx: Shift bus voltage register to mask flag bits

[Sasha Levin]

From: Stefan Brüns <stefan.bruens@rwth-aachen.de>

[ Upstream commit 2e64438487697f3f099946edc8acd4ceea6b1ab2 ]

Lower bits of the INA219/220 bus voltage register are conversion
status flags, properly shift the value.

When reading via IIO buffer, the value is passed on unaltered,
shifting is the responsibility of the user.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iio/adc/ina2xx-adc.c | 26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index f387b972e4f4..59f99b3a180d 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -44,7 +44,6 @@
 
 #define INA226_MASK_ENABLE		0x06
 #define INA226_CVRF			BIT(3)
-#define INA219_CNVR			BIT(1)
 
 #define INA2XX_MAX_REGISTERS            8
 
@@ -79,6 +78,11 @@
 #define INA226_ITS_MASK		GENMASK(5, 3)
 #define INA226_SHIFT_ITS(val)	((val) << 3)
 
+/* INA219 Bus voltage register, low bits are flags */
+#define INA219_OVF		BIT(0)
+#define INA219_CNVR		BIT(1)
+#define INA219_BUS_VOLTAGE_SHIFT	3
+
 /* Cosmetic macro giving the sampling period for a full P=UxI cycle */
 #define SAMPLING_PERIOD(c)	((c->int_time_vbus + c->int_time_vshunt) \
 				 * c->avg)
@@ -112,7 +116,7 @@ struct ina2xx_config {
 	u16 config_default;
 	int calibration_factor;
 	int shunt_div;
-	int bus_voltage_shift;
+	int bus_voltage_shift;	/* position of lsb */
 	int bus_voltage_lsb;	/* uV */
 	int power_lsb;		/* uW */
 	enum ina2xx_ids chip_id;
@@ -135,7 +139,7 @@ static const struct ina2xx_config ina2xx_config[] = {
 		.config_default = INA219_CONFIG_DEFAULT,
 		.calibration_factor = 40960000,
 		.shunt_div = 100,
-		.bus_voltage_shift = 3,
+		.bus_voltage_shift = INA219_BUS_VOLTAGE_SHIFT,
 		.bus_voltage_lsb = 4000,
 		.power_lsb = 20000,
 		.chip_id = ina219,
@@ -170,6 +174,9 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev,
 		else
 			*val  = regval;
 
+		if (chan->address == INA2XX_BUS_VOLTAGE)
+			*val >>= chip->config->bus_voltage_shift;
+
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
@@ -203,9 +210,9 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev,
 			return IIO_VAL_FRACTIONAL;
 
 		case INA2XX_BUS_VOLTAGE:
-			/* processed (mV) = raw*lsb (uV) / (1000 << shift) */
+			/* processed (mV) = raw * lsb (uV) / 1000 */
 			*val = chip->config->bus_voltage_lsb;
-			*val2 = 1000 << chip->config->bus_voltage_shift;
+			*val2 = 1000;
 			return IIO_VAL_FRACTIONAL;
 
 		case INA2XX_POWER:
@@ -532,7 +539,7 @@ static ssize_t ina2xx_shunt_resistor_store(struct device *dev,
  * Sampling Freq is a consequence of the integration times of
  * the Voltage channels.
  */
-#define INA219_CHAN_VOLTAGE(_index, _address) { \
+#define INA219_CHAN_VOLTAGE(_index, _address, _shift) { \
 	.type = IIO_VOLTAGE, \
 	.address = (_address), \
 	.indexed = 1, \
@@ -544,7 +551,8 @@ static ssize_t ina2xx_shunt_resistor_store(struct device *dev,
 	.scan_index = (_index), \
 	.scan_type = { \
 		.sign = 'u', \
-		.realbits = 16, \
+		.shift = _shift, \
+		.realbits = 16 - _shift, \
 		.storagebits = 16, \
 		.endianness = IIO_LE, \
 	} \
@@ -579,8 +587,8 @@ static const struct iio_chan_spec ina226_channels[] = {
 };
 
 static const struct iio_chan_spec ina219_channels[] = {
-	INA219_CHAN_VOLTAGE(0, INA2XX_SHUNT_VOLTAGE),
-	INA219_CHAN_VOLTAGE(1, INA2XX_BUS_VOLTAGE),
+	INA219_CHAN_VOLTAGE(0, INA2XX_SHUNT_VOLTAGE, 0),
+	INA219_CHAN_VOLTAGE(1, INA2XX_BUS_VOLTAGE, INA219_BUS_VOLTAGE_SHIFT),
 	INA219_CHAN(IIO_POWER, 2, INA2XX_POWER),
 	INA219_CHAN(IIO_CURRENT, 3, INA2XX_CURRENT),
 	IIO_CHAN_SOFT_TIMESTAMP(4),
-- 
2.14.1

[PATCH AUTOSEL for 4.14 35/84] drm/etnaviv: make THERMAL selectable

[Sasha Levin]

From: Philipp Zabel <p.zabel@pengutronix.de>

[ Upstream commit 49b82c389d2a40eaef1355aaa35868b367aec9d1 ]

The etnaviv driver causes a link failure if it is built-in but THERMAL
is built as a module:

  drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_bind':
  etnaviv_gpu.c:(.text+0x4c4): undefined reference to `thermal_of_cooling_device_register'
  etnaviv_gpu.c:(.text+0x600): undefined reference to `thermal_cooling_device_unregister'
  drivers/gpu/drm/etnaviv/etnaviv_gpu.o: In function `etnaviv_gpu_unbind':
  etnaviv_gpu.c:(.text+0x2aac): undefined reference to `thermal_cooling_device_unregister'

Adding a Kconfig dependency on THERMAL || !THERMAL to avoid this causes
a dependency loop on x86_64:

  drivers/gpu/drm/tve200/Kconfig:1:error: recursive dependency detected!
  For a resolution refer to Documentation/kbuild/kconfig-language.txt
  subsection "Kconfig recursive dependency limitations"
  drivers/gpu/drm/tve200/Kconfig:1:       symbol DRM_TVE200 depends on CMA
  For a resolution refer to Documentation/kbuild/kconfig-language.txt
  subsection "Kconfig recursive dependency limitations"
  mm/Kconfig:489: symbol CMA is selected by DRM_ETNAVIV
  For a resolution refer to Documentation/kbuild/kconfig-language.txt
  subsection "Kconfig recursive dependency limitations"
  drivers/gpu/drm/etnaviv/Kconfig:2:      symbol DRM_ETNAVIV depends on THERMAL
  For a resolution refer to Documentation/kbuild/kconfig-language.txt
  subsection "Kconfig recursive dependency limitations"
  drivers/thermal/Kconfig:5:      symbol THERMAL is selected by ACPI_VIDEO
  For a resolution refer to Documentation/kbuild/kconfig-language.txt
  subsection "Kconfig recursive dependency limitations"
  drivers/acpi/Kconfig:189:       symbol ACPI_VIDEO is selected by BACKLIGHT_CLASS_DEVICE
  For a resolution refer to Documentation/kbuild/kconfig-language.txt
  subsection "Kconfig recursive dependency limitations"
  drivers/video/backlight/Kconfig:158:    symbol BACKLIGHT_CLASS_DEVICE is selected by DRM_PARADE_PS8622
  For a resolution refer to Documentation/kbuild/kconfig-language.txt
  subsection "Kconfig recursive dependency limitations"
  drivers/gpu/drm/bridge/Kconfig:62:      symbol DRM_PARADE_PS8622 depends on DRM_BRIDGE
  For a resolution refer to Documentation/kbuild/kconfig-language.txt
  subsection "Kconfig recursive dependency limitations"
  drivers/gpu/drm/bridge/Kconfig:1:       symbol DRM_BRIDGE is selected by DRM_TVE200

To work around this, add a new option DRM_ETNAVIV_THERMAL to optionally
enable thermal throttling support and make DRM_ETNAVIV select THERMAL
at the same time.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/etnaviv/Kconfig       | 9 +++++++++
 drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 8 +++++---
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/etnaviv/Kconfig b/drivers/gpu/drm/etnaviv/Kconfig
index 38b477b5fbf9..4df3c48adcec 100644
--- a/drivers/gpu/drm/etnaviv/Kconfig
+++ b/drivers/gpu/drm/etnaviv/Kconfig
@@ -6,6 +6,7 @@ config DRM_ETNAVIV
 	depends on MMU
 	select SHMEM
 	select SYNC_FILE
+	select THERMAL if DRM_ETNAVIV_THERMAL
 	select TMPFS
 	select IOMMU_API
 	select IOMMU_SUPPORT
@@ -15,6 +16,14 @@ config DRM_ETNAVIV
 	help
 	  DRM driver for Vivante GPUs.
 
+config DRM_ETNAVIV_THERMAL
+	bool "enable ETNAVIV thermal throttling"
+	depends on DRM_ETNAVIV
+	default y
+	help
+	  Compile in support for thermal throttling.
+	  Say Y unless you want to risk burning your SoC.
+
 config DRM_ETNAVIV_REGISTER_LOGGING
 	bool "enable ETNAVIV register logging"
 	depends on DRM_ETNAVIV
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
index fc9a6a83dfc7..a1562f89c3d7 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
@@ -1622,7 +1622,7 @@ static int etnaviv_gpu_bind(struct device *dev, struct device *master,
 	struct etnaviv_gpu *gpu = dev_get_drvdata(dev);
 	int ret;
 
-	if (IS_ENABLED(CONFIG_THERMAL)) {
+	if (IS_ENABLED(CONFIG_DRM_ETNAVIV_THERMAL)) {
 		gpu->cooling = thermal_of_cooling_device_register(dev->of_node,
 				(char *)dev_name(dev), gpu, &cooling_ops);
 		if (IS_ERR(gpu->cooling))
@@ -1635,7 +1635,8 @@ static int etnaviv_gpu_bind(struct device *dev, struct device *master,
 	ret = etnaviv_gpu_clk_enable(gpu);
 #endif
 	if (ret < 0) {
-		thermal_cooling_device_unregister(gpu->cooling);
+		if (IS_ENABLED(CONFIG_DRM_ETNAVIV_THERMAL))
+			thermal_cooling_device_unregister(gpu->cooling);
 		return ret;
 	}
 
@@ -1692,7 +1693,8 @@ static void etnaviv_gpu_unbind(struct device *dev, struct device *master,
 
 	gpu->drm = NULL;
 
-	thermal_cooling_device_unregister(gpu->cooling);
+	if (IS_ENABLED(CONFIG_DRM_ETNAVIV_THERMAL))
+		thermal_cooling_device_unregister(gpu->cooling);
 	gpu->cooling = NULL;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 38/84] ath10k: update tdls teardown state to target

[Sasha Levin]

From: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com>

[ Upstream commit 424ea0d174e82365f85c6770225dba098b8f1d5f ]

It is required to update the teardown state of the peer when
a tdls link with that peer is terminated. This information is
useful for the target to perform some cleanups wrt the tdls peer.

Without proper cleanup, target assumes that the peer is connected and
blocks future connection requests, updating the teardown state of the
peer addresses the problem.

Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version.

Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 5683f1a5330e..35b752353aee 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6183,6 +6183,16 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 			   "mac vdev %d peer delete %pM sta %pK (sta gone)\n",
 			   arvif->vdev_id, sta->addr, sta);
 
+		if (sta->tdls) {
+			ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id,
+							  sta,
+							  WMI_TDLS_PEER_STATE_TEARDOWN);
+			if (ret)
+				ath10k_warn(ar, "failed to update tdls peer state for %pM state %d: %i\n",
+					    sta->addr,
+					    WMI_TDLS_PEER_STATE_TEARDOWN, ret);
+		}
+
 		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n",
-- 
2.14.1

[PATCH AUTOSEL for 4.14 37/84] iio: health: max30102: Add power enable parameter to get_temp function

[Sasha Levin]

From: Peter Meerwald-Stadler <pmeerw@pmeerw.net>

[ Upstream commit a9c47abbdd71dceeaf1b923e5ce10e700e036905 ]

Chip must not be in shutdown for reading temperature, so briefly leave
shutdown if buffer is not already running

Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iio/health/max30102.c | 36 +++++++++++++++++++++++-------------
 1 file changed, 23 insertions(+), 13 deletions(-)

diff --git a/drivers/iio/health/max30102.c b/drivers/iio/health/max30102.c
index 9fb4bc73a6bc..3ac25b21cbfc 100644
--- a/drivers/iio/health/max30102.c
+++ b/drivers/iio/health/max30102.c
@@ -329,20 +329,31 @@ static int max30102_read_temp(struct max30102_data *data, int *val)
 	return 0;
 }
 
-static int max30102_get_temp(struct max30102_data *data, int *val)
+static int max30102_get_temp(struct max30102_data *data, int *val, bool en)
 {
 	int ret;
 
+	if (en) {
+		ret = max30102_set_powermode(data, true);
+		if (ret)
+			return ret;
+	}
+
 	/* start acquisition */
 	ret = regmap_update_bits(data->regmap, MAX30102_REG_TEMP_CONFIG,
 				 MAX30102_REG_TEMP_CONFIG_TEMP_EN,
 				 MAX30102_REG_TEMP_CONFIG_TEMP_EN);
 	if (ret)
-		return ret;
+		goto out;
 
 	msleep(35);
+	ret = max30102_read_temp(data, val);
+
+out:
+	if (en)
+		max30102_set_powermode(data, false);
 
-	return max30102_read_temp(data, val);
+	return ret;
 }
 
 static int max30102_read_raw(struct iio_dev *indio_dev,
@@ -355,20 +366,19 @@ static int max30102_read_raw(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		/*
-		 * Temperature reading can only be acquired while engine
-		 * is running
+		 * Temperature reading can only be acquired when not in
+		 * shutdown; leave shutdown briefly when buffer not running
 		 */
 		mutex_lock(&indio_dev->mlock);
-
 		if (!iio_buffer_enabled(indio_dev))
-			ret = -EBUSY;
-		else {
-			ret = max30102_get_temp(data, val);
-			if (!ret)
-				ret = IIO_VAL_INT;
-		}
-
+			ret = max30102_get_temp(data, val, true);
+		else
+			ret = max30102_get_temp(data, val, false);
 		mutex_unlock(&indio_dev->mlock);
+		if (ret)
+			return ret;
+
+		ret = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
 		*val = 1000;  /* 62.5 */
-- 
2.14.1

[PATCH AUTOSEL for 4.14 40/84] dmaengine: bcm2835-dma: Use vchan_terminate_vdesc() instead of desc_free

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit de92436ac40ffe9933230aa503e24dbb5ede9201 ]

To avoid race with vchan_complete, use the race free way to terminate
running transfer.

Implement the device_synchronize callback to make sure that the terminated
descriptor is freed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/dma/bcm2835-dma.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c
index 6204cc32d09c..847f84a41a69 100644
--- a/drivers/dma/bcm2835-dma.c
+++ b/drivers/dma/bcm2835-dma.c
@@ -812,7 +812,7 @@ static int bcm2835_dma_terminate_all(struct dma_chan *chan)
 	 * c->desc is NULL and exit.)
 	 */
 	if (c->desc) {
-		bcm2835_dma_desc_free(&c->desc->vd);
+		vchan_terminate_vdesc(&c->desc->vd);
 		c->desc = NULL;
 		bcm2835_dma_abort(c->chan_base);
 
@@ -836,6 +836,13 @@ static int bcm2835_dma_terminate_all(struct dma_chan *chan)
 	return 0;
 }
 
+static void bcm2835_dma_synchronize(struct dma_chan *chan)
+{
+	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+
+	vchan_synchronize(&c->vc);
+}
+
 static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id,
 				 int irq, unsigned int irq_flags)
 {
@@ -942,6 +949,7 @@ static int bcm2835_dma_probe(struct platform_device *pdev)
 	od->ddev.device_prep_dma_memcpy = bcm2835_dma_prep_dma_memcpy;
 	od->ddev.device_config = bcm2835_dma_slave_config;
 	od->ddev.device_terminate_all = bcm2835_dma_terminate_all;
+	od->ddev.device_synchronize = bcm2835_dma_synchronize;
 	od->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
 	od->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
 	od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV) |
-- 
2.14.1

[PATCH AUTOSEL for 4.14 39/84] cpufreq: Fix governor module removal race

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit a8b149d32b663c1a4105273295184b78f53d33cf ]

It is possible to remove a cpufreq governor module after
cpufreq_parse_governor() has returned success in
store_scaling_governor() and before cpufreq_set_policy()
acquires a reference to it, because the governor list is
not protected during that period and nothing prevents the
governor from being unregistered then.

Prevent that from happening by acquiring an extra reference
to the governor module temporarily in cpufreq_parse_governor(),
under cpufreq_governor_mutex, and dropping it in
store_scaling_governor(), when cpufreq_set_policy() returns.

Note that the second cpufreq_parse_governor() call site is fine,
because it only cares about the policy member of new_policy.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/cpufreq/cpufreq.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index ea43b147a7fe..bb1e148ebfd4 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -631,6 +631,8 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
 			*governor = t;
 			err = 0;
 		}
+		if (t && !try_module_get(t->owner))
+			t = NULL;
 
 		mutex_unlock(&cpufreq_governor_mutex);
 	}
@@ -759,6 +761,10 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
 		return -EINVAL;
 
 	ret = cpufreq_set_policy(policy, &new_policy);
+
+	if (new_policy.governor)
+		module_put(new_policy.governor->owner);
+
 	return ret ? ret : count;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 41/84] dmaengine: amba-pl08x: Use vchan_terminate_vdesc() instead of desc_free

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 47d71bc75d072ce25c1063aa629e55e1cfb961b2 ]

To avoid race with vchan_complete, use the race free way to terminate
running transfer.

Implement the device_synchronize callback to make sure that the terminated
descriptor is freed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/dma/amba-pl08x.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index b52b0d55247e..97483df1f82e 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -2182,7 +2182,7 @@ static int pl08x_terminate_all(struct dma_chan *chan)
 	}
 	/* Dequeue jobs and free LLIs */
 	if (plchan->at) {
-		pl08x_desc_free(&plchan->at->vd);
+		vchan_terminate_vdesc(&plchan->at->vd);
 		plchan->at = NULL;
 	}
 	/* Dequeue jobs not yet fired as well */
@@ -2193,6 +2193,13 @@ static int pl08x_terminate_all(struct dma_chan *chan)
 	return 0;
 }
 
+static void pl08x_synchronize(struct dma_chan *chan)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+
+	vchan_synchronize(&plchan->vc);
+}
+
 static int pl08x_pause(struct dma_chan *chan)
 {
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
@@ -2773,6 +2780,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 	pl08x->memcpy.device_pause = pl08x_pause;
 	pl08x->memcpy.device_resume = pl08x_resume;
 	pl08x->memcpy.device_terminate_all = pl08x_terminate_all;
+	pl08x->memcpy.device_synchronize = pl08x_synchronize;
 	pl08x->memcpy.src_addr_widths = PL80X_DMA_BUSWIDTHS;
 	pl08x->memcpy.dst_addr_widths = PL80X_DMA_BUSWIDTHS;
 	pl08x->memcpy.directions = BIT(DMA_MEM_TO_MEM);
@@ -2802,6 +2810,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 		pl08x->slave.device_pause = pl08x_pause;
 		pl08x->slave.device_resume = pl08x_resume;
 		pl08x->slave.device_terminate_all = pl08x_terminate_all;
+		pl08x->slave.device_synchronize = pl08x_synchronize;
 		pl08x->slave.src_addr_widths = PL80X_DMA_BUSWIDTHS;
 		pl08x->slave.dst_addr_widths = PL80X_DMA_BUSWIDTHS;
 		pl08x->slave.directions =
-- 
2.14.1

[PATCH AUTOSEL for 4.14 42/84] drm/amdgpu:fix random missing of FLR NOTIFY

[Sasha Levin]

From: Monk Liu <Monk.Liu@amd.com>

[ Upstream commit 34a4d2bf06b3ab92024b8e26d6049411369d1f1a ]

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c
index 2812d88a8bdd..9b7b01333fc0 100644
--- a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c
+++ b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c
@@ -276,9 +276,17 @@ static int xgpu_ai_mailbox_rcv_irq(struct amdgpu_device *adev,
 		/* see what event we get */
 		r = xgpu_ai_mailbox_rcv_msg(adev, IDH_FLR_NOTIFICATION);
 
-		/* only handle FLR_NOTIFY now */
-		if (!r)
-			schedule_work(&adev->virt.flr_work);
+		/* sometimes the interrupt is delayed to inject to VM, so under such case
+		 * the IDH_FLR_NOTIFICATION is overwritten by VF FLR from GIM side, thus
+		 * above recieve message could be failed, we should schedule the flr_work
+		 * anyway
+		 */
+		if (r) {
+			DRM_ERROR("FLR_NOTIFICATION is missed\n");
+			xgpu_ai_mailbox_send_ack(adev);
+		}
+
+		schedule_work(&adev->virt.flr_work);
 	}
 
 	return 0;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 43/84] scsi: ses: don't ask for diagnostic pages repeatedly during probe

[Sasha Levin]

From: Li Dongyang <dongyang.li@anu.edu.au>

[ Upstream commit 9c0a50022b8ac7e863e6ec8342fa476fe5d1d75c ]

We are testing if there is a match with the ses device in a loop by
calling ses_match_to_enclosure(), which will issue scsi receive
diagnostics commands to the ses device for every device on the same
host.  On one of our boxes with 840 disks, it takes a long time to load
the driver:

[root@g1b-oss06 ~]# time modprobe ses

real	40m48.247s
user	0m0.001s
sys	0m0.196s

With the patch:

[root@g1b-oss06 ~]# time modprobe ses

real	0m17.915s
user	0m0.008s
sys	0m0.053s

Note that we still need to refresh page 10 when we see a new disk to
create the link.

Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au>
Tested-by: Jason Ozolins <jason.ozolins@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/ses.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 11826c5c2dd4..62f04c0511cf 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -615,13 +615,16 @@ static void ses_enclosure_data_process(struct enclosure_device *edev,
 }
 
 static void ses_match_to_enclosure(struct enclosure_device *edev,
-				   struct scsi_device *sdev)
+				   struct scsi_device *sdev,
+				   int refresh)
 {
+	struct scsi_device *edev_sdev = to_scsi_device(edev->edev.parent);
 	struct efd efd = {
 		.addr = 0,
 	};
 
-	ses_enclosure_data_process(edev, to_scsi_device(edev->edev.parent), 0);
+	if (refresh)
+		ses_enclosure_data_process(edev, edev_sdev, 0);
 
 	if (scsi_is_sas_rphy(sdev->sdev_target->dev.parent))
 		efd.addr = sas_get_address(sdev);
@@ -652,7 +655,7 @@ static int ses_intf_add(struct device *cdev,
 		struct enclosure_device *prev = NULL;
 
 		while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) {
-			ses_match_to_enclosure(edev, sdev);
+			ses_match_to_enclosure(edev, sdev, 1);
 			prev = edev;
 		}
 		return -ENODEV;
@@ -768,7 +771,7 @@ page2_not_supported:
 	shost_for_each_device(tmp_sdev, sdev->host) {
 		if (tmp_sdev->lun != 0 || scsi_device_enclosure(tmp_sdev))
 			continue;
-		ses_match_to_enclosure(edev, tmp_sdev);
+		ses_match_to_enclosure(edev, tmp_sdev, 0);
 	}
 
 	return 0;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 45/84] drm/sun4i: Fix format mask in DE2 driver

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@siol.net>

[ Upstream commit a2407f4bd1f3001d6b46f6d32eb1cc98a60f5a43 ]

Format mask is one bit too short. Fix it.

Fixes: 9d75b8c0b999 (drm/sun4i: add support for Allwinner DE2 mixers)

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-2-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/sun4i/sun8i_mixer.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.h b/drivers/gpu/drm/sun4i/sun8i_mixer.h
index 4785ac090b8c..c142fbb8661e 100644
--- a/drivers/gpu/drm/sun4i/sun8i_mixer.h
+++ b/drivers/gpu/drm/sun4i/sun8i_mixer.h
@@ -80,7 +80,7 @@
 
 #define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN		BIT(0)
 #define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MODE_MASK	GENMASK(2, 1)
-#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_MASK	GENMASK(11, 8)
+#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_MASK	GENMASK(12, 8)
 #define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MASK	GENMASK(31, 24)
 #define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MODE_DEF	(1 << 1)
 #define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_ARGB8888	(0 << 8)
-- 
2.14.1

[PATCH AUTOSEL for 4.14 44/84] pwm: stmpe: Fix wrong register offset for hwpwm=2 case

[Sasha Levin]

From: Axel Lin <axel.lin@ingics.com>

[ Upstream commit 8472b529e113e0863ea064fdee51bf73c3f86fd6 ]

Fix trivial copy/paste bug.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: ef1f09eca74a ("pwm: Add a driver for the STMPE PWM")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pwm/pwm-stmpe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pwm/pwm-stmpe.c b/drivers/pwm/pwm-stmpe.c
index e464582a390a..3439f1e902cb 100644
--- a/drivers/pwm/pwm-stmpe.c
+++ b/drivers/pwm/pwm-stmpe.c
@@ -145,7 +145,7 @@ static int stmpe_24xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		break;
 
 	case 2:
-		offset = STMPE24XX_PWMIC1;
+		offset = STMPE24XX_PWMIC2;
 		break;
 
 	default:
-- 
2.14.1

[PATCH AUTOSEL for 4.14 46/84] pinctrl: sh-pfc: r8a7791: Add can_clk function

[Sasha Levin]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

[ Upstream commit 57eec02caee60332b8052615e7257f932ae07abc ]

This patch adds can_clk function to r8a7743/r8a7791 which is cleaner,
and allows for independent configuration.
We keep the can_clk* pins definitions from within can0_groups and
can1_groups for uniformity and backwards compatibility.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
index 10bd35f8c894..c01ef02d326b 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
@@ -4826,6 +4826,10 @@ static const char * const can0_groups[] = {
 	"can0_data_d",
 	"can0_data_e",
 	"can0_data_f",
+	/*
+	 * Retained for backwards compatibility, use can_clk_groups in new
+	 * designs.
+	 */
 	"can_clk",
 	"can_clk_b",
 	"can_clk_c",
@@ -4837,6 +4841,21 @@ static const char * const can1_groups[] = {
 	"can1_data_b",
 	"can1_data_c",
 	"can1_data_d",
+	/*
+	 * Retained for backwards compatibility, use can_clk_groups in new
+	 * designs.
+	 */
+	"can_clk",
+	"can_clk_b",
+	"can_clk_c",
+	"can_clk_d",
+};
+
+/*
+ * can_clk_groups allows for independent configuration, use can_clk function
+ * in new designs.
+ */
+static const char * const can_clk_groups[] = {
 	"can_clk",
 	"can_clk_b",
 	"can_clk_c",
@@ -5308,7 +5327,7 @@ static const char * const vin2_groups[] = {
 };
 
 static const struct {
-	struct sh_pfc_function common[56];
+	struct sh_pfc_function common[57];
 	struct sh_pfc_function r8a779x[2];
 } pinmux_functions = {
 	.common = {
@@ -5316,6 +5335,7 @@ static const struct {
 		SH_PFC_FUNCTION(avb),
 		SH_PFC_FUNCTION(can0),
 		SH_PFC_FUNCTION(can1),
+		SH_PFC_FUNCTION(can_clk),
 		SH_PFC_FUNCTION(du),
 		SH_PFC_FUNCTION(du0),
 		SH_PFC_FUNCTION(du1),
-- 
2.14.1

[PATCH AUTOSEL for 4.14 47/84] pinctrl: sh-pfc: r8a7795-es1: Fix MOD_SEL1 bit[25:24] to 0x3 when using STP_ISEN_1_D

[Sasha Levin]

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

[ Upstream commit b16cd900de7911f96af17327a081a2141a0b763f ]

This patch fixes the implementation incorrect of MOD_SEL1 bit[25:24]
value when STP_ISEN_1_D pin function is selected for IPSR16 bit[27:24].

This is a correction to the incorrect implementation of MOD_SEL register
pin assignment for R8A7795 SoC specification of R-Car Gen3 Hardware
User's Manual Rev.0.51E.

Fixes: 0b0ffc96dbe30fa9 ("pinctrl: sh-pfc: Initial R8A7795 PFC support)
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
index 95fd0994893a..ad037534aa13 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
@@ -1397,7 +1397,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_MSEL(IP16_27_24,	AUDIO_CLKOUT_B,		SEL_ADG_1),
 	PINMUX_IPSR_MSEL(IP16_27_24,	SSI_SCK2_B,		SEL_SSI_1),
 	PINMUX_IPSR_MSEL(IP16_27_24,	TS_SDEN1_D,		SEL_TSIF1_3),
-	PINMUX_IPSR_MSEL(IP16_27_24,	STP_ISEN_1_D,		SEL_SSP1_1_2),
+	PINMUX_IPSR_MSEL(IP16_27_24,	STP_ISEN_1_D,		SEL_SSP1_1_3),
 	PINMUX_IPSR_MSEL(IP16_27_24,	STP_OPWM_0_E,		SEL_SSP1_0_4),
 	PINMUX_IPSR_MSEL(IP16_27_24,	RIF3_D0_B,		SEL_DRIF3_1),
 	PINMUX_IPSR_MSEL(IP16_27_24,	TCLK2_B,		SEL_TIMER_TMU_1),
-- 
2.14.1

[PATCH AUTOSEL for 4.14 48/84] perf annotate: Fix unnecessary memory allocation for s390x

[Sasha Levin]

From: Thomas Richter <tmricht@linux.vnet.ibm.com>

[ Upstream commit 36c263607d36c6a3788c09301d9f5fe35404048a ]

This patch fixes a bug introduced with commit d9f8dfa9baf9 ("perf
annotate s390: Implement jump types for perf annotate").

'perf annotate' displays annotated assembler output by reading output of
command objdump and parsing the disassembled lines. For each shown
mnemonic this function sequence is executed:

  disasm_line__new()
  |
  +--> disasm_line__init_ins()
       |
       +--> ins__find()
            |
            +--> arch->associate_instruction_ops()

The s390x specific function assigned to function pointer
associate_instruction_ops refers to function s390__associate_ins_ops().

This function checks for supported mnemonics and assigns a NULL pointer
to unsupported mnemonics.  However even the NULL pointer is added to the
architecture dependend instruction array.

This leads to an extremely large architecture instruction array
(due to array resize logic in function arch__grow_instructions()).

Depending on the objdump output being parsed the array can end up
with several ten-thousand elements.

This patch checks if a mnemonic is supported and only adds supported
ones into the architecture instruction array. The array does not contain
elements with NULL pointers anymore.

Before the patch (With some debug printf output):

[root@s35lp76 perf]# time ./perf annotate --stdio > /tmp/xxxbb

real	8m49.679s
user	7m13.008s
sys	0m1.649s
[root@s35lp76 perf]# fgrep '__ins__find sorted:1 nr_instructions:'
			/tmp/xxxbb | tail -1
__ins__find sorted:1 nr_instructions:87433 ins:0x341583c0
[root@s35lp76 perf]#

The number of different s390x branch/jump/call/return instructions
entered into the array is 87433.

After the patch (With some printf debug output:)

[root@s35lp76 perf]# time ./perf annotate --stdio > /tmp/xxxaa

real	1m24.553s
user	0m0.587s
sys	0m1.530s
[root@s35lp76 perf]# fgrep '__ins__find sorted:1 nr_instructions:'
			/tmp/xxxaa | tail -1
__ins__find sorted:1 nr_instructions:56 ins:0x3f406570
[root@s35lp76 perf]#

The number of different s390x branch/jump/call/return instructions
entered into the array is 56 which is sensible.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20171124094637.55558-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/arch/s390/annotate/instructions.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/perf/arch/s390/annotate/instructions.c b/tools/perf/arch/s390/annotate/instructions.c
index c9a81673e8aa..89f0b6c00e3f 100644
--- a/tools/perf/arch/s390/annotate/instructions.c
+++ b/tools/perf/arch/s390/annotate/instructions.c
@@ -16,7 +16,8 @@ static struct ins_ops *s390__associate_ins_ops(struct arch *arch, const char *na
 	if (!strcmp(name, "br"))
 		ops = &ret_ops;
 
-	arch__associate_ins_ops(arch, name, ops);
+	if (ops)
+		arch__associate_ins_ops(arch, name, ops);
 	return ops;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 49/84] perf annotate: Fix objdump comment parsing for Intel mov dissassembly

[Sasha Levin]

From: Thomas Richter <tmricht@linux.vnet.ibm.com>

[ Upstream commit 35a8a148d8c1ee9e5ae18f9565a880490f816f89 ]

The command 'perf annotate' parses the output of objdump and also
investigates the comments produced by objdump. For example the
output of objdump produces (on x86):

23eee:  4c 8b 3d 13 01 21 00 mov 0x210113(%rip),%r15
                                # 234008 <stderr@@GLIBC_2.2.5+0x9a8>

and the function mov__parse() is called to investigate the complete
line. Mov__parse() breaks this line into several parts and finally
calls function comment__symbol() to parse the data after the comment
character '#'. Comment__symbol() expects a hexadecimal address followed
by a symbol in '<' and '>' brackets.

However the 2nd parameter given to function comment__symbol()
always points to the comment character '#'. The address parsing
always returns 0 because the character '#' is not a digit and
strtoull() fails without being noticed.

Fix this by advancing the second parameter to function comment__symbol()
by one byte before invocation and add an error check after strtoull()
has been called.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fixes: 6de783b6f50f ("perf annotate: Resolve symbols using objdump comment")
Link: http://lkml.kernel.org/r/20171128075632.72182-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/util/annotate.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
index 41d415707264..dac76ac117c1 100644
--- a/tools/perf/util/annotate.c
+++ b/tools/perf/util/annotate.c
@@ -323,6 +323,8 @@ static int comment__symbol(char *raw, char *comment, u64 *addrp, char **namep)
 		return 0;
 
 	*addrp = strtoull(comment, &endptr, 16);
+	if (endptr == comment)
+		return 0;
 	name = strchr(endptr, '<');
 	if (name == NULL)
 		return -1;
@@ -436,8 +438,8 @@ static int mov__parse(struct arch *arch, struct ins_operands *ops, struct map *m
 		return 0;
 
 	comment = ltrim(comment);
-	comment__symbol(ops->source.raw, comment, &ops->source.addr, &ops->source.name);
-	comment__symbol(ops->target.raw, comment, &ops->target.addr, &ops->target.name);
+	comment__symbol(ops->source.raw, comment + 1, &ops->source.addr, &ops->source.name);
+	comment__symbol(ops->target.raw, comment + 1, &ops->target.addr, &ops->target.name);
 
 	return 0;
 
@@ -481,7 +483,7 @@ static int dec__parse(struct arch *arch __maybe_unused, struct ins_operands *ops
 		return 0;
 
 	comment = ltrim(comment);
-	comment__symbol(ops->target.raw, comment, &ops->target.addr, &ops->target.name);
+	comment__symbol(ops->target.raw, comment + 1, &ops->target.addr, &ops->target.name);
 
 	return 0;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.14 50/84] iwlwifi: mvm: avoid dumping assert log when device is stopped

[Sasha Levin]

From: Sara Sharon <sara.sharon@intel.com>

[ Upstream commit 6362ab721ef5c4ecfa01f53ad4137d3d984f0c6c ]

We might erroneously get to error dumping code when the
device is already stopped.

In that case the driver will detect a defective value and will try to
reset the HW, assuming it is only a bus issue.  The driver than
proceeds with the dumping.

The result has two side effects:

1. The device won't be stopped again, since the transport status is
already stopped, so the device remains powered on while it actually
should be stopped.

2. The dump in that case is completely garbaged and useless.

Detect and avoid this.  It will also make debugging such issues
easier.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
index 0ae7624eac9d..43ab172d31cb 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
@@ -603,6 +603,12 @@ static void iwl_mvm_dump_lmac_error_log(struct iwl_mvm *mvm, u32 base)
 
 void iwl_mvm_dump_nic_error_log(struct iwl_mvm *mvm)
 {
+	if (!test_bit(STATUS_DEVICE_ENABLED, &mvm->trans->status)) {
+		IWL_ERR(mvm,
+			"DEVICE_ENABLED bit is not set. Aborting dump.\n");
+		return;
+	}
+
 	iwl_mvm_dump_lmac_error_log(mvm, mvm->error_event_table[0]);
 
 	if (mvm->error_event_table[1])
-- 
2.14.1

[PATCH AUTOSEL for 4.14 51/84] drm/amdgpu:fix virtual dce bug

[Sasha Levin]

From: Monk Liu <Monk.Liu@amd.com>

[ Upstream commit 129d65c18ecfb249aceb540c31fdaf79bd5a11ff ]

this fix the issue that access memory after freed
after driver unloaded.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/amd/amdgpu/dce_virtual.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/dce_virtual.c b/drivers/gpu/drm/amd/amdgpu/dce_virtual.c
index b9ee9073cb0d..f3f93b6b51ef 100644
--- a/drivers/gpu/drm/amd/amdgpu/dce_virtual.c
+++ b/drivers/gpu/drm/amd/amdgpu/dce_virtual.c
@@ -437,6 +437,8 @@ static int dce_virtual_sw_fini(void *handle)
 	drm_kms_helper_poll_fini(adev->ddev);
 
 	drm_mode_config_cleanup(adev->ddev);
+	/* clear crtcs pointer to avoid dce irq finish routine access freed data */
+	memset(adev->mode_info.crtcs, 0, sizeof(adev->mode_info.crtcs[0]) * AMDGPU_MAX_CRTCS);
 	adev->mode_info.mode_config_initialized = false;
 	return 0;
 }
@@ -723,7 +725,7 @@ static void dce_virtual_set_crtc_vblank_interrupt_state(struct amdgpu_device *ad
 							int crtc,
 							enum amdgpu_interrupt_state state)
 {
-	if (crtc >= adev->mode_info.num_crtc) {
+	if (crtc >= adev->mode_info.num_crtc || !adev->mode_info.crtcs[crtc]) {
 		DRM_DEBUG("invalid crtc %d\n", crtc);
 		return;
 	}
-- 
2.14.1

[PATCH AUTOSEL for 4.14 53/84] mwifiex: cfg80211: do not change virtual interface during scan processing

[Sasha Levin]

From: Limin Zhu <liminzhu@marvell.com>

[ Upstream commit c61cfe49f0f0f0d1f8b56d0b045838d597e8c3a3 ]

(1) Change virtual interface operation in cfg80211 process reset and
reinitilize private data structure.
(2) Scan result event processed in main process will dereference private
data structure concurrently, ocassionly crash the kernel.

The cornel case could be trigger by below steps:
(1) wpa_cli mlan0 scan
(2) ./hostapd mlan0.conf

Cfg80211 asynchronous scan procedure is not all the time operated
under rtnl lock, here we add the protect to serialize the cfg80211
scan and change_virtual interface operation.

Signed-off-by: Limin Zhu <liminzhu@marvell.com>
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 32c5074da84c..68aa0c7a8139 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -1116,6 +1116,12 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
 	enum nl80211_iftype curr_iftype = dev->ieee80211_ptr->iftype;
 
+	if (priv->scan_request) {
+		mwifiex_dbg(priv->adapter, ERROR,
+			    "change virtual interface: scan in process\n");
+		return -EBUSY;
+	}
+
 	switch (curr_iftype) {
 	case NL80211_IFTYPE_ADHOC:
 		switch (type) {
-- 
2.14.1

[PATCH AUTOSEL for 4.14 52/84] clk: qcom: msm8916: fix mnd_width for codec_digcodec

[Sasha Levin]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit d8e488e8242ecf129eebc440c92d800a99ca109d ]

This patch fixes missing mnd_width for codec_digital clk, this is now set to
8 inline with datasheet.

Fixes: 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/qcom/gcc-msm8916.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c
index 3410ee68d4bc..2057809219f4 100644
--- a/drivers/clk/qcom/gcc-msm8916.c
+++ b/drivers/clk/qcom/gcc-msm8916.c
@@ -1438,6 +1438,7 @@ static const struct freq_tbl ftbl_codec_clk[] = {
 
 static struct clk_rcg2 codec_digcodec_clk_src = {
 	.cmd_rcgr = 0x1c09c,
+	.mnd_width = 8,
 	.hid_width = 5,
 	.parent_map = gcc_xo_gpll1_emclk_sleep_map,
 	.freq_tbl = ftbl_codec_clk,
-- 
2.14.1

[PATCH AUTOSEL for 4.14 54/84] ath10k: fix invalid STS_CAP_OFFSET_MASK

[Sasha Levin]

From: Ben Greear <greearb@candelatech.com>

[ Upstream commit 8cec57f5277ef0e354e37a0bf909dc71bc1f865b ]

The 10.4 firmware defines this as a 3-bit field, as does the
mac80211 stack.  The 4th bit is defined as CONF_IMPLICIT_BF
at least in the firmware header I have seen.  This patch
fixes the ath10k wmi header to match the firmware.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ath/ath10k/wmi.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 7a3606dde227..bab876cf25fe 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -5235,7 +5235,8 @@ enum wmi_10_4_vdev_param {
 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
 
 #define WMI_TXBF_STS_CAP_OFFSET_LSB	4
-#define WMI_TXBF_STS_CAP_OFFSET_MASK	0xf0
+#define WMI_TXBF_STS_CAP_OFFSET_MASK	0x70
+#define WMI_TXBF_CONF_IMPLICIT_BF       BIT(7)
 #define WMI_BF_SOUND_DIM_OFFSET_LSB	8
 #define WMI_BF_SOUND_DIM_OFFSET_MASK	0xf00
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 56/84] spi: sun6i: disable/unprepare clocks on remove

[Sasha Levin]

From: Tobias Jordan <Tobias.Jordan@elektrobit.com>

[ Upstream commit 2d9bbd02c54094ceffa555143b0d68cd06504d63 ]

sun6i_spi_probe() uses sun6i_spi_runtime_resume() to prepare/enable
clocks, so sun6i_spi_remove() should use sun6i_spi_runtime_suspend() to
disable/unprepare them if we're not suspended.
Replacing pm_runtime_disable() by pm_runtime_force_suspend() will ensure
that sun6i_spi_runtime_suspend() is called if needed.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 3558fe900e8af (spi: sunxi: Add Allwinner A31 SPI controller driver)
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/spi/spi-sun6i.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index fb38234249a8..8533f4edd00a 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -541,7 +541,7 @@ err_free_master:
 
 static int sun6i_spi_remove(struct platform_device *pdev)
 {
-	pm_runtime_disable(&pdev->dev);
+	pm_runtime_force_suspend(&pdev->dev);
 
 	return 0;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.14 55/84] tools/usbip: fixes build with musl libc toolchain

[Sasha Levin]

From: Julien BOIBESSOT <julien.boibessot@armadeus.com>

[ Upstream commit 77be4c878c72e411ad22af96b6f81dd45c26450a ]

Indeed musl doesn't define old SIGCLD signal name but only new one SIGCHLD.
SIGCHLD is the new POSIX name for that signal so it doesn't change
anything on other libcs.

This fixes this kind of build error:

usbipd.c: In function ‘set_signal’:
usbipd.c:459:12: error: 'SIGCLD' undeclared (first use in this function)
  sigaction(SIGCLD, &act, NULL);
            ^~~~~~
usbipd.c:459:12: note: each undeclared identifier is reported only once
	for each function it appears in
Makefile:407: recipe for target 'usbipd.o' failed
make[3]: *** [usbipd.o] Error 1

Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/usb/usbip/src/usbipd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/usb/usbip/src/usbipd.c b/tools/usb/usbip/src/usbipd.c
index 009afb4a3aae..c6dad2a13c80 100644
--- a/tools/usb/usbip/src/usbipd.c
+++ b/tools/usb/usbip/src/usbipd.c
@@ -456,7 +456,7 @@ static void set_signal(void)
 	sigaction(SIGTERM, &act, NULL);
 	sigaction(SIGINT, &act, NULL);
 	act.sa_handler = SIG_IGN;
-	sigaction(SIGCLD, &act, NULL);
+	sigaction(SIGCHLD, &act, NULL);
 }
 
 static const char *pid_file;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 58/84] scsi: core: scsi_get_device_flags_keyed(): Always return device flags

[Sasha Levin]

From: Bart Van Assche <bart.vanassche@wdc.com>

[ Upstream commit a44c9d36509c83cf64f33b93f6ab2e63822c01eb ]

Since scsi_get_device_flags_keyed() callers do not check whether or not
the returned value is an error code, change that function such that it
returns a flags value even if the 'key' argument is invalid.  Note:
since commit 28a0bc4120d3 ("scsi: sd: Implement blacklist option for
WRITE SAME w/ UNMAP") bit 31 is a valid device information flag so
checking whether bit 31 is set in the return value is not sufficient to
tell the difference between an error code and a flags value.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/scsi_devinfo.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index b19b00adacb2..42f0a1a6f689 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -595,17 +595,12 @@ int scsi_get_device_flags_keyed(struct scsi_device *sdev,
 				int key)
 {
 	struct scsi_dev_info_list *devinfo;
-	int err;
 
 	devinfo = scsi_dev_info_list_find(vendor, model, key);
 	if (!IS_ERR(devinfo))
 		return devinfo->flags;
 
-	err = PTR_ERR(devinfo);
-	if (err != -ENOENT)
-		return err;
-
-	/* nothing found, return nothing */
+	/* key or device not found: return nothing */
 	if (key != SCSI_DEVINFO_GLOBAL)
 		return 0;
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 57/84] bnxt_en: Don't print "Link speed -1 no longer supported" messages.

[Sasha Levin]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit a8168b6cee6e9334dfebb4b9108e8d73794f6088 ]

On some dual port NICs, the 2 ports have to be configured with compatible
link speeds.  Under some conditions, a port's configured speed may no
longer be supported.  The firmware will send a message to the driver
when this happens.

Improve this logic that prints out the warning by only printing it if
we can determine the link speed that is no longer supported.  If the
speed is unknown or it is in autoneg mode, skip the warning message.

Reported-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index b66689a6eac0..807cf75f0a98 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1698,12 +1698,16 @@ static int bnxt_async_event_process(struct bnxt *bp,
 
 		if (BNXT_VF(bp))
 			goto async_event_process_exit;
-		if (data1 & 0x20000) {
+
+		/* print unsupported speed warning in forced speed mode only */
+		if (!(link_info->autoneg & BNXT_AUTONEG_SPEED) &&
+		    (data1 & 0x20000)) {
 			u16 fw_speed = link_info->force_link_speed;
 			u32 speed = bnxt_fw_to_ethtool_speed(fw_speed);
 
-			netdev_warn(bp->dev, "Link speed %d no longer supported\n",
-				    speed);
+			if (speed != SPEED_UNKNOWN)
+				netdev_warn(bp->dev, "Link speed %d no longer supported\n",
+					    speed);
 		}
 		set_bit(BNXT_LINK_SPEED_CHNG_SP_EVENT, &bp->sp_event);
 		/* fall thru */
-- 
2.14.1

[PATCH AUTOSEL for 4.14 59/84] scsi: devinfo: apply to HP XP the same flags as Hitachi VSP

[Sasha Levin]

From: Xose Vazquez Perez <xose.vazquez@gmail.com>

[ Upstream commit b369a0471503130cfc74f9f62071db97f48948c3 ]

Commit 56f3d383f37b ("scsi: scsi_devinfo: Add TRY_VPD_PAGES to HITACHI
OPEN-V blacklist entry") modified some Hitachi entries:

    HITACHI is always supporting VPD pages, even though it's claiming to
    support SCSI Revision 3 only.

The same should have been done also for HP-rebranded.

[mkp: checkpatch and tweaked commit message]

Cc: Hannes Reinecke <hare@suse.de>
Cc: Takahiro Yasui <takahiro.yasui@hds.com>
Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/scsi_devinfo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 42f0a1a6f689..cfc095f45e26 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -181,7 +181,7 @@ static struct {
 	{"HITACHI", "6586-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
 	{"HITACHI", "6588-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
 	{"HP", "A6189A", NULL, BLIST_SPARSELUN | BLIST_LARGELUN},	/* HP VA7400 */
-	{"HP", "OPEN-", "*", BLIST_REPORTLUN2}, /* HP XP Arrays */
+	{"HP", "OPEN-", "*", BLIST_REPORTLUN2 | BLIST_TRY_VPD_PAGES}, /* HP XP Arrays */
 	{"HP", "NetRAID-4M", NULL, BLIST_FORCELUN},
 	{"HP", "HSV100", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD},
 	{"HP", "C1557A", NULL, BLIST_FORCELUN},
-- 
2.14.1

[PATCH AUTOSEL for 4.14 60/84] scsi: dh: add new rdac devices

[Sasha Levin]

From: Xose Vazquez Perez <xose.vazquez@gmail.com>

[ Upstream commit 4b3aec2bbbce1c35f50e7475a9fd78d24b9ea4ea ]

Add IBM 3542 and 3552, arrays: FAStT200 and FAStT500.

Add full STK OPENstorage family, arrays: 9176, D173, D178, D210, D220,
D240 and D280.

Add STK BladeCtlr family, arrays: B210, B220, B240 and B280.

These changes were done in multipath-tools time ago.

Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Cc: device-mapper development <dm-devel@redhat.com>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/scsi_dh.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_dh.c b/drivers/scsi/scsi_dh.c
index 84addee05be6..a5e30e9449ef 100644
--- a/drivers/scsi/scsi_dh.c
+++ b/drivers/scsi/scsi_dh.c
@@ -56,10 +56,13 @@ static const struct scsi_dh_blist scsi_dh_blist[] = {
 	{"IBM", "1815",			"rdac", },
 	{"IBM", "1818",			"rdac", },
 	{"IBM", "3526",			"rdac", },
+	{"IBM", "3542",			"rdac", },
+	{"IBM", "3552",			"rdac", },
 	{"SGI", "TP9",			"rdac", },
 	{"SGI", "IS",			"rdac", },
-	{"STK", "OPENstorage D280",	"rdac", },
+	{"STK", "OPENstorage",		"rdac", },
 	{"STK", "FLEXLINE 380",		"rdac", },
+	{"STK", "BladeCtlr",		"rdac", },
 	{"SUN", "CSM",			"rdac", },
 	{"SUN", "LCSM100",		"rdac", },
 	{"SUN", "STK6580_6780",		"rdac", },
-- 
2.14.1

[PATCH AUTOSEL for 4.14 61/84] media: vsp1: Prevent suspending and resuming DRM pipelines

[Sasha Levin]

From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

[ Upstream commit a17d2d6cd9985ca09a9e384f1bc71d710f7e5203 ]

When used as part of a display pipeline, the VSP is stopped and
restarted explicitly by the DU from its suspend and resume handlers.
There is thus no need to stop or restart pipelines in the VSP suspend
and resume handlers, and doing so would cause the hardware to be
left in a misconfigured state.

Ensure that the VSP suspend and resume handlers do not affect DRM-based
pipelines.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/platform/vsp1/vsp1_drv.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
index 962e4c304076..eed9516e25e1 100644
--- a/drivers/media/platform/vsp1/vsp1_drv.c
+++ b/drivers/media/platform/vsp1/vsp1_drv.c
@@ -571,7 +571,13 @@ static int __maybe_unused vsp1_pm_suspend(struct device *dev)
 {
 	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
 
-	vsp1_pipelines_suspend(vsp1);
+	/*
+	 * When used as part of a display pipeline, the VSP is stopped and
+	 * restarted explicitly by the DU.
+	 */
+	if (!vsp1->drm)
+		vsp1_pipelines_suspend(vsp1);
+
 	pm_runtime_force_suspend(vsp1->dev);
 
 	return 0;
@@ -582,7 +588,13 @@ static int __maybe_unused vsp1_pm_resume(struct device *dev)
 	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
 
 	pm_runtime_force_resume(vsp1->dev);
-	vsp1_pipelines_resume(vsp1);
+
+	/*
+	 * When used as part of a display pipeline, the VSP is stopped and
+	 * restarted explicitly by the DU.
+	 */
+	if (!vsp1->drm)
+		vsp1_pipelines_resume(vsp1);
 
 	return 0;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.14 62/84] dm raid: fix raid set size revalidation

[Sasha Levin]

From: Heinz Mauelshagen <heinzm@redhat.com>

[ Upstream commit 61e06e2c3ebd986050958513bfa40dceed756f8f ]

The raid set size is being revalidated unconditionally before a
reshaping conversion is started.  MD requires the size to only be
reduced in case of a stripe removing (i.e. shrinking) reshape but not
when growing because the raid array has to stay small until after the
growing reshape finishes.

Fix by avoiding the size revalidation in preresume unless a shrinking
reshape is requested.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/dm-raid.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index a25eebd98996..33834db7c0a0 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -675,15 +675,11 @@ static struct raid_type *get_raid_type_by_ll(const int level, const int layout)
 	return NULL;
 }
 
-/*
- * Conditionally change bdev capacity of @rs
- * in case of a disk add/remove reshape
- */
-static void rs_set_capacity(struct raid_set *rs)
+/* Adjust rdev sectors */
+static void rs_set_rdev_sectors(struct raid_set *rs)
 {
 	struct mddev *mddev = &rs->md;
 	struct md_rdev *rdev;
-	struct gendisk *gendisk = dm_disk(dm_table_get_md(rs->ti->table));
 
 	/*
 	 * raid10 sets rdev->sector to the device size, which
@@ -692,8 +688,16 @@ static void rs_set_capacity(struct raid_set *rs)
 	rdev_for_each(rdev, mddev)
 		if (!test_bit(Journal, &rdev->flags))
 			rdev->sectors = mddev->dev_sectors;
+}
 
-	set_capacity(gendisk, mddev->array_sectors);
+/*
+ * Change bdev capacity of @rs in case of a disk add/remove reshape
+ */
+static void rs_set_capacity(struct raid_set *rs)
+{
+	struct gendisk *gendisk = dm_disk(dm_table_get_md(rs->ti->table));
+
+	set_capacity(gendisk, rs->md.array_sectors);
 	revalidate_disk(gendisk);
 }
 
@@ -1674,8 +1678,11 @@ static void do_table_event(struct work_struct *ws)
 	struct raid_set *rs = container_of(ws, struct raid_set, md.event_work);
 
 	smp_rmb(); /* Make sure we access most actual mddev properties */
-	if (!rs_is_reshaping(rs))
+	if (!rs_is_reshaping(rs)) {
+		if (rs_is_raid10(rs))
+			rs_set_rdev_sectors(rs);
 		rs_set_capacity(rs);
+	}
 	dm_table_event(rs->ti->table);
 }
 
@@ -3845,11 +3852,10 @@ static int raid_preresume(struct dm_target *ti)
 		mddev->resync_min = mddev->recovery_cp;
 	}
 
-	rs_set_capacity(rs);
-
 	/* Check for any reshape request unless new raid set */
 	if (test_and_clear_bit(RT_FLAG_RESHAPE_RS, &rs->runtime_flags)) {
 		/* Initiate a reshape. */
+		rs_set_rdev_sectors(rs);
 		mddev_lock_nointr(mddev);
 		r = rs_start_reshape(rs);
 		mddev_unlock(mddev);
@@ -3878,6 +3884,10 @@ static void raid_resume(struct dm_target *ti)
 	mddev->ro = 0;
 	mddev->in_sync = 0;
 
+	/* Only reduce raid set size before running a disk removing reshape. */
+	if (mddev->delta_disks < 0)
+		rs_set_capacity(rs);
+
 	/*
 	 * Keep the RAID set frozen if reshape/rebuild flags are set.
 	 * The RAID set is unfrozen once the next table load/resume,
-- 
2.14.1

[PATCH AUTOSEL for 4.14 63/84] media: cpia2: Fix a couple off by one bugs

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d5ac225c7d64c9c3ef821239edc035634e594ec9 ]

The cam->buffers[] array has cam->num_frames elements so the > needs to
be changed to >= to avoid going beyond the end of the array.  The
->buffers[] array is allocated in cpia2_allocate_buffers() if you want
to confirm.

Fixes: ab33d5071de7 ("V4L/DVB (3376): Add cpia2 camera support")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/usb/cpia2/cpia2_v4l.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/cpia2/cpia2_v4l.c b/drivers/media/usb/cpia2/cpia2_v4l.c
index 3dedd83f0b19..a1c59f19cf2d 100644
--- a/drivers/media/usb/cpia2/cpia2_v4l.c
+++ b/drivers/media/usb/cpia2/cpia2_v4l.c
@@ -808,7 +808,7 @@ static int cpia2_querybuf(struct file *file, void *fh, struct v4l2_buffer *buf)
 	struct camera_data *cam = video_drvdata(file);
 
 	if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
-	   buf->index > cam->num_frames)
+	   buf->index >= cam->num_frames)
 		return -EINVAL;
 
 	buf->m.offset = cam->buffers[buf->index].data - cam->frame_buffer;
@@ -859,7 +859,7 @@ static int cpia2_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf)
 
 	if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
 	   buf->memory != V4L2_MEMORY_MMAP ||
-	   buf->index > cam->num_frames)
+	   buf->index >= cam->num_frames)
 		return -EINVAL;
 
 	DBG("QBUF #%d\n", buf->index);
-- 
2.14.1

[PATCH AUTOSEL for 4.14 64/84] media: davinci: vpif_capture: add NULL check on devm_kzalloc return value

[Sasha Levin]

From: "Gustavo A. R. Silva" <garsilva@embeddedor.com>

[ Upstream commit 5a18c2434f8bfc8bc2fb0f8af3e44f7408d63e4f ]

Check return value from call to devm_kzalloc() in order to prevent
a NULL pointer dereference.

This issue was detected with the help of Coccinelle.

Fixes: 4a5f8ae50b66 ("[media] davinci: vpif_capture: get subdevs from DT when available")

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/platform/davinci/vpif_capture.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c
index 0ef36cec21d1..233622bef4a5 100644
--- a/drivers/media/platform/davinci/vpif_capture.c
+++ b/drivers/media/platform/davinci/vpif_capture.c
@@ -1545,6 +1545,8 @@ vpif_capture_get_pdata(struct platform_device *pdev)
 					    sizeof(*chan->inputs) *
 					    VPIF_CAPTURE_NUM_CHANNELS,
 					    GFP_KERNEL);
+		if (!chan->inputs)
+			return NULL;
 
 		chan->input_count++;
 		chan->inputs[i].input.type = V4L2_INPUT_TYPE_CAMERA;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 66/84] net: sched: drop qdisc_reset from dev_graft_qdisc

[Sasha Levin]

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit 7bbde83b1860c28a1cc35516352c4e7e5172c29a ]

In qdisc_graft_qdisc a "new" qdisc is attached and the 'qdisc_destroy'
operation is called on the old qdisc. The destroy operation will wait
a rcu grace period and call qdisc_rcu_free(). At which point
gso_cpu_skb is free'd along with all stats so no need to zero stats
and gso_cpu_skb from the graft operation itself.

Further after dropping the qdisc locks we can not continue to call
qdisc_reset before waiting an rcu grace period so that the qdisc is
detached from all cpus. By removing the qdisc_reset() here we get
the correct property of waiting an rcu grace period and letting the
qdisc_destroy operation clean up the qdisc correctly.

Note, a refcnt greater than 1 would cause the destroy operation to
be aborted however if this ever happened the reference to the qdisc
would be lost and we would have a memory leak.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/sched/sch_generic.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index bf8c81e07c70..79549baf5804 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -743,10 +743,6 @@ struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
 	root_lock = qdisc_lock(oqdisc);
 	spin_lock_bh(root_lock);
 
-	/* Prune old scheduler */
-	if (oqdisc && refcount_read(&oqdisc->refcnt) <= 1)
-		qdisc_reset(oqdisc);
-
 	/* ... and graft new one */
 	if (qdisc == NULL)
 		qdisc = &noop_qdisc;
@@ -897,6 +893,16 @@ static bool some_qdisc_is_busy(struct net_device *dev)
 	return false;
 }
 
+static void dev_qdisc_reset(struct net_device *dev,
+			    struct netdev_queue *dev_queue,
+			    void *none)
+{
+	struct Qdisc *qdisc = dev_queue->qdisc_sleeping;
+
+	if (qdisc)
+		qdisc_reset(qdisc);
+}
+
 /**
  * 	dev_deactivate_many - deactivate transmissions on several devices
  * 	@head: list of devices to deactivate
@@ -907,7 +913,6 @@ static bool some_qdisc_is_busy(struct net_device *dev)
 void dev_deactivate_many(struct list_head *head)
 {
 	struct net_device *dev;
-	bool sync_needed = false;
 
 	list_for_each_entry(dev, head, close_list) {
 		netdev_for_each_tx_queue(dev, dev_deactivate_queue,
@@ -917,20 +922,25 @@ void dev_deactivate_many(struct list_head *head)
 					     &noop_qdisc);
 
 		dev_watchdog_down(dev);
-		sync_needed |= !dev->dismantle;
 	}
 
 	/* Wait for outstanding qdisc-less dev_queue_xmit calls.
 	 * This is avoided if all devices are in dismantle phase :
 	 * Caller will call synchronize_net() for us
 	 */
-	if (sync_needed)
-		synchronize_net();
+	synchronize_net();
 
 	/* Wait for outstanding qdisc_run calls. */
-	list_for_each_entry(dev, head, close_list)
+	list_for_each_entry(dev, head, close_list) {
 		while (some_qdisc_is_busy(dev))
 			yield();
+		/* The new qdisc is assigned at this point so we can safely
+		 * unwind stale skb lists and qdisc statistics
+		 */
+		netdev_for_each_tx_queue(dev, dev_qdisc_reset, NULL);
+		if (dev_ingress_queue(dev))
+			dev_qdisc_reset(dev, dev_ingress_queue(dev), NULL);
+	}
 }
 
 void dev_deactivate(struct net_device *dev)
-- 
2.14.1

[PATCH AUTOSEL for 4.14 65/84] virtio_net: Disable interrupts if napi_complete_done rescheduled napi

[Sasha Levin]

From: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>

[ Upstream commit fdaa767aefc1685f9a41e91f447c9aea94103df6 ]

Since commit 39e6c8208d7b ("net: solve a NAPI race") napi has been able
to be rescheduled within napi_complete_done() even in non-busypoll case,
but virtnet_poll() always enabled interrupts before complete, and when
napi was rescheduled within napi_complete_done() it did not disable
interrupts.
This caused more interrupts when event idx is disabled.

According to commit cbdadbbf0c79 ("virtio_net: fix race in RX VQ
processing") we cannot place virtqueue_enable_cb_prepare() after
NAPI_STATE_SCHED is cleared, so disable interrupts again if
napi_complete_done() returned false.

Tested with vhost-user of OVS 2.7 on host, which does not have the event
idx feature.

* Before patch:

$ netperf -t UDP_STREAM -H 192.168.150.253 -l 60 -- -m 1472
MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.150.253 () port 0 AF_INET
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

212992    1472   60.00     32763206      0    6430.32
212992           60.00     23384299           4589.56

Interrupts on guest: 9872369
Packets/interrupt:   2.37

* After patch

$ netperf -t UDP_STREAM -H 192.168.150.253 -l 60 -- -m 1472
MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.150.253 () port 0 AF_INET
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

212992    1472   60.00     32794646      0    6436.49
212992           60.00     32793501           6436.27

Interrupts on guest: 4941299
Packets/interrupt:   6.64

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/virtio_net.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 7927e28f5336..c366aaab2b69 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -260,9 +260,12 @@ static void virtqueue_napi_complete(struct napi_struct *napi,
 	int opaque;
 
 	opaque = virtqueue_enable_cb_prepare(vq);
-	if (napi_complete_done(napi, processed) &&
-	    unlikely(virtqueue_poll(vq, opaque)))
-		virtqueue_napi_schedule(napi, vq);
+	if (napi_complete_done(napi, processed)) {
+		if (unlikely(virtqueue_poll(vq, opaque)))
+			virtqueue_napi_schedule(napi, vq);
+	} else {
+		virtqueue_disable_cb(vq);
+	}
 }
 
 static void skb_xmit_done(struct virtqueue *vq)
-- 
2.14.1

[PATCH AUTOSEL for 4.14 67/84] veth: set peer GSO values

[Sasha Levin]

From: Stephen Hemminger <stephen@networkplumber.org>

[ Upstream commit 72d24955b44a4039db54a1c252b5031969eeaac3 ]

When new veth is created, and GSO values have been configured
on one device, clone those values to the peer.

For example:
   # ip link add dev vm1 gso_max_size 65530 type veth peer name vm2

This should create vm1 <--> vm2 with both having GSO maximum
size set to 65530.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/veth.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index f5438d0978ca..a69ad39ee57e 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -410,6 +410,9 @@ static int veth_newlink(struct net *src_net, struct net_device *dev,
 	if (ifmp && (dev->ifindex != 0))
 		peer->ifindex = ifmp->ifi_index;
 
+	peer->gso_max_size = dev->gso_max_size;
+	peer->gso_max_segs = dev->gso_max_segs;
+
 	err = register_netdevice(peer);
 	put_net(net);
 	net = NULL;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 68/84] drm/amdkfd: Fix memory leaks in kfd topology

[Sasha Levin]

From: Yong Zhao <yong.zhao@amd.com>

[ Upstream commit 5108d768408abc80e4e8d99f5b406a73cb04056b ]

Kobject created using kobject_create_and_add() can be freed using
kobject_put() when there is no referenece any more. However,
kobject memory allocated with kzalloc() has to set up a release
callback in order to free it when the counter decreases to 0.
Otherwise it causes memory leak.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
index 19ce59028d6b..e0b78fd9804d 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
@@ -501,11 +501,17 @@ static ssize_t sysprops_show(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
+static void kfd_topology_kobj_release(struct kobject *kobj)
+{
+	kfree(kobj);
+}
+
 static const struct sysfs_ops sysprops_ops = {
 	.show = sysprops_show,
 };
 
 static struct kobj_type sysprops_type = {
+	.release = kfd_topology_kobj_release,
 	.sysfs_ops = &sysprops_ops,
 };
 
@@ -541,6 +547,7 @@ static const struct sysfs_ops iolink_ops = {
 };
 
 static struct kobj_type iolink_type = {
+	.release = kfd_topology_kobj_release,
 	.sysfs_ops = &iolink_ops,
 };
 
@@ -568,6 +575,7 @@ static const struct sysfs_ops mem_ops = {
 };
 
 static struct kobj_type mem_type = {
+	.release = kfd_topology_kobj_release,
 	.sysfs_ops = &mem_ops,
 };
 
@@ -607,6 +615,7 @@ static const struct sysfs_ops cache_ops = {
 };
 
 static struct kobj_type cache_type = {
+	.release = kfd_topology_kobj_release,
 	.sysfs_ops = &cache_ops,
 };
 
@@ -729,6 +738,7 @@ static const struct sysfs_ops node_ops = {
 };
 
 static struct kobj_type node_type = {
+	.release = kfd_topology_kobj_release,
 	.sysfs_ops = &node_ops,
 };
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 69/84] powerpc/modules: Don't try to restore r2 after a sibling call

[Sasha Levin]

From: Josh Poimboeuf <jpoimboe@redhat.com>

[ Upstream commit b9eab08d012fa093947b230f9a87257c27fb829b ]

When attempting to load a livepatch module, I got the following error:

  module_64: patch_module: Expect noop after relocate, got 3c820000

The error was triggered by the following code in
unregister_netdevice_queue():

  14c:   00 00 00 48     b       14c <unregister_netdevice_queue+0x14c>
                         14c: R_PPC64_REL24      net_set_todo
  150:   00 00 82 3c     addis   r4,r2,0

GCC didn't insert a nop after the branch to net_set_todo() because it's
a sibling call, so it never returns.  The nop isn't needed after the
branch in that case.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-and-tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/include/asm/code-patching.h |  1 +
 arch/powerpc/kernel/module_64.c          | 12 +++++++++++-
 arch/powerpc/lib/code-patching.c         |  5 +++++
 3 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
index abef812de7f8..2c895e8d07f7 100644
--- a/arch/powerpc/include/asm/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -33,6 +33,7 @@ int patch_branch(unsigned int *addr, unsigned long target, int flags);
 int patch_instruction(unsigned int *addr, unsigned int instr);
 
 int instr_is_relative_branch(unsigned int instr);
+int instr_is_relative_link_branch(unsigned int instr);
 int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr);
 unsigned long branch_target(const unsigned int *instr);
 unsigned int translate_branch(const unsigned int *dest,
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 0b0f89685b67..2a1b1273a312 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -486,7 +486,17 @@ static bool is_early_mcount_callsite(u32 *instruction)
    restore r2. */
 static int restore_r2(u32 *instruction, struct module *me)
 {
-	if (is_early_mcount_callsite(instruction - 1))
+	u32 *prev_insn = instruction - 1;
+
+	if (is_early_mcount_callsite(prev_insn))
+		return 1;
+
+	/*
+	 * Make sure the branch isn't a sibling call.  Sibling calls aren't
+	 * "link" branches and they don't return, so they don't need the r2
+	 * restore afterwards.
+	 */
+	if (!instr_is_relative_link_branch(*prev_insn))
 		return 1;
 
 	if (*instruction != PPC_INST_NOP) {
diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c
index d469224c4ada..096d4e4d31e6 100644
--- a/arch/powerpc/lib/code-patching.c
+++ b/arch/powerpc/lib/code-patching.c
@@ -302,6 +302,11 @@ int instr_is_relative_branch(unsigned int instr)
 	return instr_is_branch_iform(instr) || instr_is_branch_bform(instr);
 }
 
+int instr_is_relative_link_branch(unsigned int instr)
+{
+	return instr_is_relative_branch(instr) && (instr & BRANCH_SET_LINK);
+}
+
 static unsigned long branch_iform_target(const unsigned int *instr)
 {
 	signed long imm;
-- 
2.14.1

[PATCH AUTOSEL for 4.14 70/84] powerpc/64: Don't trace irqs-off at interrupt return to soft-disabled context

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit acb1feab320e38588fccc568e3767761f494976f ]

When an interrupt is returning to a soft-disabled context (which can
happen for non-maskable interrupts or synchronous interrupts), it goes
through the motions of soft-disabling again, including calling
TRACE_DISABLE_INTS (i.e., trace_hardirqs_off()).

This is not necessary, because we must already be soft-disabled in the
interrupt context, it also may be causing crashes in the irq tracing
code to re-enter as an nmi. Replace it with a warning to ensure that
soft-interrupts are still disabled.

Fixes: 7c0482e3d055 ("powerpc/irq: Fix another case of lazy IRQ state getting out of sync")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/kernel/entry_64.S | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 8a8a6d7ddcc6..6f07c687fc05 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -939,9 +939,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	beq	1f
 	rlwinm	r7,r7,0,~PACA_IRQ_HARD_DIS
 	stb	r7,PACAIRQHAPPENED(r13)
-1:	li	r0,0
-	stb	r0,PACASOFTIRQEN(r13);
-	TRACE_DISABLE_INTS
+1:
+#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_BUG)
+	/* The interrupt should not have soft enabled. */
+	lbz	r7,PACASOFTIRQEN(r13)
+1:	tdnei	r7,0
+	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
+#endif
 	b	.Ldo_restore
 
 	/*
-- 
2.14.1

[PATCH AUTOSEL for 4.14 71/84] arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit f5bbcd533a9d1af97b8a0862a421bb8455f1bf6d ]

Describe the GPIO used to reset the Ethernet PHY for EthernetAVB.
This allows the driver to reset the PHY during probe and after system
resume.

This fixes Ethernet operation after resume from s2ram on Salvator-XS,
where the enable pin of the regulator providing PHY power is connected
to PRESETn, and PSCI powers down the SoC during system suspend.

On Salvator-X, the enable pin is always pulled high, but the driver may
still need to reset the PHY if this wasn't done by the bootloader
before.

Inspired by patches in the BSP for the individual Salvator-X/XS boards
by Kazuya Mizuguchi.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm64/boot/dts/renesas/salvator-common.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index d9d885006a8e..9eb11a8d9eda 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -264,6 +264,7 @@
 		reg = <0>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	};
 };
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 72/84] agp/intel: Flush all chipset writes after updating the GGTT

[Sasha Levin]

From: Chris Wilson <chris@chris-wilson.co.uk>

[ Upstream commit 8516673a996870ea0ceb337ee4f83c33c5ec3111 ]

Before accessing the GGTT we must flush the PTE writes and make them
visible to the chipset, or else the indirect access may end up in the
wrong page. In commit 3497971a71d8 ("agp/intel: Flush chipset writes
after updating a single PTE"), we noticed corruption of the uploads for
pwrite and for capturing GPU error states, but it was presumed that the
explicit calls to intel_gtt_chipset_flush() were sufficient for the
execbuffer path. However, we have not been flushing the chipset between
the PTE writes and access via the GTT itself.

For simplicity, do the flush after any PTE update rather than try and
batch the flushes on a just-in-time basis.

References: 3497971a71d8 ("agp/intel: Flush chipset writes after updating a single PTE")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208214616.30147-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/char/agp/intel-gtt.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 9b6b6023193b..dde7caac7f9f 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -872,6 +872,8 @@ void intel_gtt_insert_sg_entries(struct sg_table *st,
 		}
 	}
 	wmb();
+	if (intel_private.driver->chipset_flush)
+		intel_private.driver->chipset_flush();
 }
 EXPORT_SYMBOL(intel_gtt_insert_sg_entries);
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 73/84] mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED

[Sasha Levin]

From: Adiel Aloni <adiel.aloni@intel.com>

[ Upstream commit e16ea4bb516bc21ea2202f2107718b29218bea59 ]

Enforce using PS_MANUAL_POLL in ps hwsim debugfs to trigger a poll,
only if PS_ENABLED was set before.
This is required due to commit c9491367b759 ("mac80211: always update the
PM state of a peer on MGMT / DATA frames") that enforces the ap to
check only mgmt/data frames ps bit, and then update station's power save
accordingly.
When sending only ps-poll (control frame) the ap will not be aware that
the station entered power save.
Setting ps enable before triggering ps_poll, will send NDP with PM bit
enabled first.

Signed-off-by: Adiel Aloni <adiel.aloni@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 052e67bce6b3..afbb5a813d46 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -727,16 +727,21 @@ static int hwsim_fops_ps_write(void *dat, u64 val)
 	    val != PS_MANUAL_POLL)
 		return -EINVAL;
 
-	old_ps = data->ps;
-	data->ps = val;
-
-	local_bh_disable();
 	if (val == PS_MANUAL_POLL) {
+		if (data->ps != PS_ENABLED)
+			return -EINVAL;
+		local_bh_disable();
 		ieee80211_iterate_active_interfaces_atomic(
 			data->hw, IEEE80211_IFACE_ITER_NORMAL,
 			hwsim_send_ps_poll, data);
-		data->ps_poll_pending = true;
-	} else if (old_ps == PS_DISABLED && val != PS_DISABLED) {
+		local_bh_enable();
+		return 0;
+	}
+	old_ps = data->ps;
+	data->ps = val;
+
+	local_bh_disable();
+	if (old_ps == PS_DISABLED && val != PS_DISABLED) {
 		ieee80211_iterate_active_interfaces_atomic(
 			data->hw, IEEE80211_IFACE_ITER_NORMAL,
 			hwsim_send_nullfunc_ps, data);
-- 
2.14.1

[PATCH AUTOSEL for 4.14 74/84] mac80211: remove BUG() when interface type is invalid

[Sasha Levin]

From: Luca Coelho <luciano.coelho@intel.com>

[ Upstream commit c7976f5272486e4ff406014c4b43e2fa3b70b052 ]

In the ieee80211_setup_sdata() we check if the interface type is valid
and, if not, call BUG().  This should never happen, but if there is
something wrong with the code, it will not be caught until the bug
happens when an interface is being set up.  Calling BUG() is too
extreme for this and a WARN_ON() would be better used instead.  Change
that.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/mac80211/iface.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index f75029abf728..e4912858b72c 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1493,7 +1493,7 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
 		break;
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case NUM_NL80211_IFTYPES:
-		BUG();
+		WARN_ON(1);
 		break;
 	}
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 75/84] crypto: caam/qi - use correct print specifier for size_t

[Sasha Levin]

From: Horia Geantă <horia.geanta@nxp.com>

[ Upstream commit 9db09e3bad65393dc23b0279beb7f3754d77065c ]

Fix below warnings on ARMv7 by using %zu for printing size_t values:

drivers/crypto/caam/caamalg_qi.c: In function aead_edesc_alloc:
drivers/crypto/caam/caamalg_qi.c:417:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=]
   sizeof(struct qm_sg_entry))
                 ^
drivers/crypto/caam/caamalg_qi.c:672:16: note: in expansion of macro CAAM_QI_MAX_AEAD_SG
    qm_sg_ents, CAAM_QI_MAX_AEAD_SG);
                ^
drivers/crypto/caam/caamalg_qi.c: In function ablkcipher_edesc_alloc:
drivers/crypto/caam/caamalg_qi.c:440:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=]
   sizeof(struct qm_sg_entry))
                 ^
drivers/crypto/caam/caamalg_qi.c:909:16: note: in expansion of macro CAAM_QI_MAX_ABLKCIPHER_SG
    qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG);
                ^
drivers/crypto/caam/caamalg_qi.c: In function ablkcipher_giv_edesc_alloc:
drivers/crypto/caam/caamalg_qi.c:440:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=]
   sizeof(struct qm_sg_entry))
                 ^
drivers/crypto/caam/caamalg_qi.c:1062:16: note: in expansion of macro CAAM_QI_MAX_ABLKCIPHER_SG
    qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG);
                ^

Fixes: eb9ba37dc15a ("crypto: caam/qi - handle large number of S/Gs case")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/crypto/caam/caamalg_qi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/crypto/caam/caamalg_qi.c b/drivers/crypto/caam/caamalg_qi.c
index 2eefc4a26bc2..b648e31673f9 100644
--- a/drivers/crypto/caam/caamalg_qi.c
+++ b/drivers/crypto/caam/caamalg_qi.c
@@ -668,7 +668,7 @@ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req,
 	qm_sg_ents = 1 + !!ivsize + mapped_src_nents +
 		     (mapped_dst_nents > 1 ? mapped_dst_nents : 0);
 	if (unlikely(qm_sg_ents > CAAM_QI_MAX_AEAD_SG)) {
-		dev_err(qidev, "Insufficient S/G entries: %d > %lu\n",
+		dev_err(qidev, "Insufficient S/G entries: %d > %zu\n",
 			qm_sg_ents, CAAM_QI_MAX_AEAD_SG);
 		caam_unmap(qidev, req->src, req->dst, src_nents, dst_nents,
 			   iv_dma, ivsize, op_type, 0, 0);
@@ -905,7 +905,7 @@ static struct ablkcipher_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request
 
 	qm_sg_ents += mapped_dst_nents > 1 ? mapped_dst_nents : 0;
 	if (unlikely(qm_sg_ents > CAAM_QI_MAX_ABLKCIPHER_SG)) {
-		dev_err(qidev, "Insufficient S/G entries: %d > %lu\n",
+		dev_err(qidev, "Insufficient S/G entries: %d > %zu\n",
 			qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG);
 		caam_unmap(qidev, req->src, req->dst, src_nents, dst_nents,
 			   iv_dma, ivsize, op_type, 0, 0);
@@ -1058,7 +1058,7 @@ static struct ablkcipher_edesc *ablkcipher_giv_edesc_alloc(
 	}
 
 	if (unlikely(qm_sg_ents > CAAM_QI_MAX_ABLKCIPHER_SG)) {
-		dev_err(qidev, "Insufficient S/G entries: %d > %lu\n",
+		dev_err(qidev, "Insufficient S/G entries: %d > %zu\n",
 			qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG);
 		caam_unmap(qidev, req->src, req->dst, src_nents, dst_nents,
 			   iv_dma, ivsize, GIVENCRYPT, 0, 0);
-- 
2.14.1

[PATCH AUTOSEL for 4.14 76/84] ASoC: nuc900: Fix a loop timeout test

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 65a12b3aafed5fc59f4ce41b22b752b1729e6701 ]

We should be finishing the loop with timeout set to zero but because
this is a post-op we finish with timeout == -1.

Fixes: 1082e2703a2d ("ASoC: NUC900/audio: add nuc900 audio driver support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/nuc900/nuc900-ac97.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c
index b6615affe571..fde974d52bb2 100644
--- a/sound/soc/nuc900/nuc900-ac97.c
+++ b/sound/soc/nuc900/nuc900-ac97.c
@@ -67,7 +67,7 @@ static unsigned short nuc900_ac97_read(struct snd_ac97 *ac97,
 
 	/* polling the AC_R_FINISH */
 	while (!(AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_R_FINISH)
-								&& timeout--)
+								&& --timeout)
 		mdelay(1);
 
 	if (!timeout) {
@@ -121,7 +121,7 @@ static void nuc900_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
 
 	/* polling the AC_W_FINISH */
 	while ((AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_W_FINISH)
-								&& timeout--)
+								&& --timeout)
 		mdelay(1);
 
 	if (!timeout)
-- 
2.14.1

[PATCH AUTOSEL for 4.14 78/84] Fix misannotated out-of-line _copy_to_user()

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit a0e94598e6b6c0d1df6a5fa14eb7c767ca817a20 ]

Destination is a kernel pointer and source - a userland one
in _copy_from_user(); _copy_to_user() is the other way round.

Fixes: d597580d37377 ("generic ...copy_..._user primitives")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 lib/usercopy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/usercopy.c b/lib/usercopy.c
index 15e2e6fb060e..3744b2a8e591 100644
--- a/lib/usercopy.c
+++ b/lib/usercopy.c
@@ -20,7 +20,7 @@ EXPORT_SYMBOL(_copy_from_user);
 #endif
 
 #ifndef INLINE_COPY_TO_USER
-unsigned long _copy_to_user(void *to, const void __user *from, unsigned long n)
+unsigned long _copy_to_user(void __user *to, const void *from, unsigned long n)
 {
 	might_fault();
 	if (likely(access_ok(VERIFY_WRITE, to, n))) {
-- 
2.14.1

[PATCH AUTOSEL for 4.14 77/84] mmc: mmc_test: Ensure command queue is disabled for testing

[Sasha Levin]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit 23a185254ace8e63dc4ca36e0315aed9440ae749 ]

mmc_test disables the command queue because none of the tests use the
command queue. However the Reset Test will re-enable it, so disable it in
that case too.

Fixes: 9d4579a85c84 ("mmc: mmc_test: Disable Command Queue while mmc_test is used")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mmc/core/mmc_test.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/core/mmc_test.c b/drivers/mmc/core/mmc_test.c
index 478869805b96..789afef66fce 100644
--- a/drivers/mmc/core/mmc_test.c
+++ b/drivers/mmc/core/mmc_test.c
@@ -2328,10 +2328,17 @@ static int mmc_test_reset(struct mmc_test_card *test)
 	int err;
 
 	err = mmc_hw_reset(host);
-	if (!err)
+	if (!err) {
+		/*
+		 * Reset will re-enable the card's command queue, but tests
+		 * expect it to be disabled.
+		 */
+		if (card->ext_csd.cmdq_en)
+			mmc_cmdq_disable(card);
 		return RESULT_OK;
-	else if (err == -EOPNOTSUPP)
+	} else if (err == -EOPNOTSUPP) {
 		return RESULT_UNSUP_HOST;
+	}
 
 	return RESULT_FAIL;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.14 79/84] ipvlan: add L2 check for packets arriving via virtual devices

[Sasha Levin]

From: Mahesh Bandewar <maheshb@google.com>

[ Upstream commit 92ff42645028fa6f9b8aa767718457b9264316b4 ]

Packets that don't have dest mac as the mac of the master device should
not be entertained by the IPvlan rx-handler. This is mostly true as the
packet path mostly takes care of that, except when the master device is
a virtual device. As demonstrated in the following case -

  ip netns add ns1
  ip link add ve1 type veth peer name ve2
  ip link add link ve2 name iv1 type ipvlan mode l2
  ip link set dev iv1 netns ns1
  ip link set ve1 up
  ip link set ve2 up
  ip -n ns1 link set iv1 up
  ip addr add 192.168.10.1/24 dev ve1
  ip -n ns1 addr 192.168.10.2/24 dev iv1
  ping -c2 192.168.10.2
  <Works!>
  ip neigh show dev ve1
  ip neigh show 192.168.10.2 lladdr <random> dev ve1
  ping -c2 192.168.10.2
  <Still works! Wrong!!>

This patch adds that missing check in the IPvlan rx-handler.

Reported-by: Amit Sikka <amit.sikka@ericsson.com>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ipvlan/ipvlan_core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c
index c23dea48ad0f..71ff6bd4be9f 100644
--- a/drivers/net/ipvlan/ipvlan_core.c
+++ b/drivers/net/ipvlan/ipvlan_core.c
@@ -304,6 +304,10 @@ static int ipvlan_rcv_frame(struct ipvl_addr *addr, struct sk_buff **pskb,
 		if (dev_forward_skb(ipvlan->dev, skb) == NET_RX_SUCCESS)
 			success = true;
 	} else {
+		if (!ether_addr_equal_64bits(eth_hdr(skb)->h_dest,
+					     ipvlan->phy_dev->dev_addr))
+			skb->pkt_type = PACKET_OTHERHOST;
+
 		ret = RX_HANDLER_ANOTHER;
 		success = true;
 	}
-- 
2.14.1

[PATCH AUTOSEL for 4.14 81/84] locking/locktorture: Fix num reader/writer corner cases

[Sasha Levin]

From: Davidlohr Bueso <dave@stgolabs.net>

[ Upstream commit 2ce77d16db4240dd2e422fc0a5c26d3e2ec03446 ]

Things can explode for locktorture if the user does combinations
of nwriters_stress=0 nreaders_stress=0. Fix this by not assuming
we always want to torture writer threads.

Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/locking/locktorture.c | 76 +++++++++++++++++++++++++-------------------
 1 file changed, 44 insertions(+), 32 deletions(-)

diff --git a/kernel/locking/locktorture.c b/kernel/locking/locktorture.c
index f24582d4dad3..6dca260eeccf 100644
--- a/kernel/locking/locktorture.c
+++ b/kernel/locking/locktorture.c
@@ -715,8 +715,7 @@ static void __torture_print_stats(char *page,
 {
 	bool fail = 0;
 	int i, n_stress;
-	long max = 0;
-	long min = statp[0].n_lock_acquired;
+	long max = 0, min = statp ? statp[0].n_lock_acquired : 0;
 	long long sum = 0;
 
 	n_stress = write ? cxt.nrealwriters_stress : cxt.nrealreaders_stress;
@@ -823,7 +822,7 @@ static void lock_torture_cleanup(void)
 	 * such, only perform the underlying torture-specific cleanups,
 	 * and avoid anything related to locktorture.
 	 */
-	if (!cxt.lwsa)
+	if (!cxt.lwsa && !cxt.lrsa)
 		goto end;
 
 	if (writer_tasks) {
@@ -898,6 +897,13 @@ static int __init lock_torture_init(void)
 		firsterr = -EINVAL;
 		goto unwind;
 	}
+
+	if (nwriters_stress == 0 && nreaders_stress == 0) {
+		pr_alert("lock-torture: must run at least one locking thread\n");
+		firsterr = -EINVAL;
+		goto unwind;
+	}
+
 	if (cxt.cur_ops->init)
 		cxt.cur_ops->init();
 
@@ -921,17 +927,19 @@ static int __init lock_torture_init(void)
 #endif
 
 	/* Initialize the statistics so that each run gets its own numbers. */
+	if (nwriters_stress) {
+		lock_is_write_held = 0;
+		cxt.lwsa = kmalloc(sizeof(*cxt.lwsa) * cxt.nrealwriters_stress, GFP_KERNEL);
+		if (cxt.lwsa == NULL) {
+			VERBOSE_TOROUT_STRING("cxt.lwsa: Out of memory");
+			firsterr = -ENOMEM;
+			goto unwind;
+		}
 
-	lock_is_write_held = 0;
-	cxt.lwsa = kmalloc(sizeof(*cxt.lwsa) * cxt.nrealwriters_stress, GFP_KERNEL);
-	if (cxt.lwsa == NULL) {
-		VERBOSE_TOROUT_STRING("cxt.lwsa: Out of memory");
-		firsterr = -ENOMEM;
-		goto unwind;
-	}
-	for (i = 0; i < cxt.nrealwriters_stress; i++) {
-		cxt.lwsa[i].n_lock_fail = 0;
-		cxt.lwsa[i].n_lock_acquired = 0;
+		for (i = 0; i < cxt.nrealwriters_stress; i++) {
+			cxt.lwsa[i].n_lock_fail = 0;
+			cxt.lwsa[i].n_lock_acquired = 0;
+		}
 	}
 
 	if (cxt.cur_ops->readlock) {
@@ -948,19 +956,21 @@ static int __init lock_torture_init(void)
 			cxt.nrealreaders_stress = cxt.nrealwriters_stress;
 		}
 
-		lock_is_read_held = 0;
-		cxt.lrsa = kmalloc(sizeof(*cxt.lrsa) * cxt.nrealreaders_stress, GFP_KERNEL);
-		if (cxt.lrsa == NULL) {
-			VERBOSE_TOROUT_STRING("cxt.lrsa: Out of memory");
-			firsterr = -ENOMEM;
-			kfree(cxt.lwsa);
-			cxt.lwsa = NULL;
-			goto unwind;
-		}
-
-		for (i = 0; i < cxt.nrealreaders_stress; i++) {
-			cxt.lrsa[i].n_lock_fail = 0;
-			cxt.lrsa[i].n_lock_acquired = 0;
+		if (nreaders_stress) {
+			lock_is_read_held = 0;
+			cxt.lrsa = kmalloc(sizeof(*cxt.lrsa) * cxt.nrealreaders_stress, GFP_KERNEL);
+			if (cxt.lrsa == NULL) {
+				VERBOSE_TOROUT_STRING("cxt.lrsa: Out of memory");
+				firsterr = -ENOMEM;
+				kfree(cxt.lwsa);
+				cxt.lwsa = NULL;
+				goto unwind;
+			}
+
+			for (i = 0; i < cxt.nrealreaders_stress; i++) {
+				cxt.lrsa[i].n_lock_fail = 0;
+				cxt.lrsa[i].n_lock_acquired = 0;
+			}
 		}
 	}
 
@@ -990,12 +1000,14 @@ static int __init lock_torture_init(void)
 			goto unwind;
 	}
 
-	writer_tasks = kzalloc(cxt.nrealwriters_stress * sizeof(writer_tasks[0]),
-			       GFP_KERNEL);
-	if (writer_tasks == NULL) {
-		VERBOSE_TOROUT_ERRSTRING("writer_tasks: Out of memory");
-		firsterr = -ENOMEM;
-		goto unwind;
+	if (nwriters_stress) {
+		writer_tasks = kzalloc(cxt.nrealwriters_stress * sizeof(writer_tasks[0]),
+				       GFP_KERNEL);
+		if (writer_tasks == NULL) {
+			VERBOSE_TOROUT_ERRSTRING("writer_tasks: Out of memory");
+			firsterr = -ENOMEM;
+			goto unwind;
+		}
 	}
 
 	if (cxt.cur_ops->readlock) {
-- 
2.14.1

[PATCH AUTOSEL for 4.14 80/84] rcutorture/configinit: Fix build directory error message

[Sasha Levin]

From: SeongJae Park <sj38.park@gmail.com>

[ Upstream commit 2adfa4210f8f35cdfb4e08318cc06b99752964c2 ]

The 'configinit.sh' script checks the format of optional argument for the
build directory, printing an error message if the format is not valid.
However, the error message uses the wrong variable, indicating an empty
string even though the user entered a non-empty (but erroneous) string.
This commit fixes the script to use the correct variable.

Fixes: c87b9c601ac8 ("rcutorture: Add KVM-based test framework")

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/testing/selftests/rcutorture/bin/configinit.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/rcutorture/bin/configinit.sh b/tools/testing/selftests/rcutorture/bin/configinit.sh
index 3f81a1095206..50a6371b2b2e 100755
--- a/tools/testing/selftests/rcutorture/bin/configinit.sh
+++ b/tools/testing/selftests/rcutorture/bin/configinit.sh
@@ -51,7 +51,7 @@ then
 			mkdir $builddir
 		fi
 	else
-		echo Bad build directory: \"$builddir\"
+		echo Bad build directory: \"$buildloc\"
 		exit 2
 	fi
 fi
-- 
2.14.1

[PATCH AUTOSEL for 4.14 83/84] IB/mlx5: revisit -Wmaybe-uninitialized warning

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 1b19b95169cd52fe82cd442fec0b279fe25cc838 ]

A warning that I thought I had fixed before occasionally comes
back in rare randconfig builds (I found 7 instances in the last
100000 builds, originally it was much more frequent):

drivers/infiniband/hw/mlx5/mr.c: In function 'mlx5_ib_reg_user_mr':
drivers/infiniband/hw/mlx5/mr.c:1229:5: error: 'order' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  if (order <= mr_cache_max_order(dev)) {
     ^
drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'ncont' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'page_shift' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/infiniband/hw/mlx5/mr.c:1260:2: error: 'npages' may be used uninitialized in this function [-Werror=maybe-uninitialized]

I've looked at all those findings again and noticed that they are all
with CONFIG_INFINIBAND_USER_MEM=n, which means ib_umem_get() returns
an error unconditionally and we never initialize or use those variables.
This triggers a condition in gcc iff mr_umem_get() is partially but not
entirely inlined, which in turn depends on the exact combination of
optimization settings. This is a known problem with gcc, with no
easy solution in the compiler, so this adds another workaround that
should be more reliable than my previous attempt.

Returning an error from mlx5_ib_reg_user_mr() earlier means that we
can completely bypass the logic that caused the warning, the compiler
can now see that the variable is never accessed.

Fixes: 14ab8896f5d9 ("IB/mlx5: avoid bogus -Wmaybe-uninitialized warning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/mlx5/mr.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
index 37bbc543847a..2520320845ee 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -1206,6 +1206,9 @@ struct ib_mr *mlx5_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
 	int err;
 	bool use_umr = true;
 
+	if (!IS_ENABLED(CONFIG_INFINIBAND_USER_MEM))
+		return ERR_PTR(-EINVAL);
+
 	mlx5_ib_dbg(dev, "start 0x%llx, virt_addr 0x%llx, length 0x%llx, access_flags 0x%x\n",
 		    start, virt_addr, length, access_flags);
 
-- 
2.14.1

[PATCH AUTOSEL for 4.14 82/84] ima: relax requiring a file signature for new files with zero length

[Sasha Levin]

From: Mimi Zohar <zohar@linux.vnet.ibm.com>

[ Upstream commit b7e27bc1d42e8e0cc58b602b529c25cd0071b336 ]

Custom policies can require file signatures based on LSM labels.  These
files are normally created and only afterwards labeled, requiring them
to be signed.

Instead of requiring file signatures based on LSM labels, entire
filesystems could require file signatures.  In this case, we need the
ability of writing new files without requiring file signatures.

The definition of a "new" file was originally defined as any file with
a length of zero.  Subsequent patches redefined a "new" file to be based
on the FILE_CREATE open flag.  By combining the open flag with a file
size of zero, this patch relaxes the file signature requirement.

Fixes: 1ac202e978e1 ima: accept previously set IMA_NEW_FILE
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 security/integrity/ima/ima_appraise.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/security/integrity/ima/ima_appraise.c b/security/integrity/ima/ima_appraise.c
index 7d769b948de8..348db9b78681 100644
--- a/security/integrity/ima/ima_appraise.c
+++ b/security/integrity/ima/ima_appraise.c
@@ -223,7 +223,8 @@ int ima_appraise_measurement(enum ima_hooks func,
 		if (opened & FILE_CREATED)
 			iint->flags |= IMA_NEW_FILE;
 		if ((iint->flags & IMA_NEW_FILE) &&
-		    !(iint->flags & IMA_DIGSIG_REQUIRED))
+		    (!(iint->flags & IMA_DIGSIG_REQUIRED) ||
+		     (inode->i_size == 0)))
 			status = INTEGRITY_PASS;
 		goto out;
 	}
-- 
2.14.1

[PATCH AUTOSEL for 4.14 84/84] dmaengine: qcom_hidma: check pending interrupts

[Sasha Levin]

From: Sinan Kaya <okaya@codeaurora.org>

[ Upstream commit 38680bc6b1e3592bc9e18adc1d6e259667df27ce ]

Driver is missing the interrupts if two requests are queued up at the same
time as the interrupt handler is servicing a request that was just
delivered.

The ISR clears the interrupt at the end but it could be clearing the
interrupt for an outstanding event. Therefore, second interrupt never
arrives.

Clear the interrupt first and then check for completions.

Also, make sure that request start and interrupt clear do not overlap in
time by using a spinlock.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/dma/qcom/hidma_ll.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
index 4999e266b2de..7c6e2ff212a2 100644
--- a/drivers/dma/qcom/hidma_ll.c
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -393,6 +393,8 @@ static int hidma_ll_reset(struct hidma_lldev *lldev)
  */
 static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
 {
+	unsigned long irqflags;
+
 	if (cause & HIDMA_ERR_INT_MASK) {
 		dev_err(lldev->dev, "error 0x%x, disabling...\n",
 				cause);
@@ -410,6 +412,10 @@ static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
 		return;
 	}
 
+	spin_lock_irqsave(&lldev->lock, irqflags);
+	writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+	spin_unlock_irqrestore(&lldev->lock, irqflags);
+
 	/*
 	 * Fine tuned for this HW...
 	 *
@@ -421,9 +427,6 @@ static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
 	 * Try to consume as many EVREs as possible.
 	 */
 	hidma_handle_tre_completion(lldev);
-
-	/* We consumed TREs or there are pending TREs or EVREs. */
-	writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
 }
 
 irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
-- 
2.14.1