[PATCH 4.1 64/65] pti: Rename X86_FEATURE_KAISER to X86_FEATURE_PTI

[Pavel Tatashin <pasha.tatashin@oracle.com>]

cat /proc/cpuinfo still shows kaiser feature, and want only pti
to be visible to users. Therefore, rename this macro to get
correct user visible output.

Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Brian Maly <brian.maly@oracle.com>
---
 arch/x86/include/asm/cpufeature.h |  2 +-
 arch/x86/include/asm/kaiser.h     |  6 +++---
 arch/x86/kernel/entry_64.S        | 12 ++++++------
 arch/x86/mm/kaiser.c              |  4 ++--
 4 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index a22aa8c5903c..fc790e2f0d4e 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -202,7 +202,7 @@
 #define X86_FEATURE_KAISER	( 7*32+31) /* CONFIG_KAISER w/o nokaiser */
 
 /* Because the ALTERNATIVE scheme is for members of the X86_FEATURE club... */
-#define X86_FEATURE_KAISER	( 7*32+31) /* CONFIG_PAGE_TABLE_ISOLATION w/o nokaiser */
+#define X86_FEATURE_PTI	( 7*32+31) /* CONFIG_PAGE_TABLE_ISOLATION w/o nopti */
 
 /* Virtualization flags: Linux defined, word 8 */
 #define X86_FEATURE_TPR_SHADOW  ( 8*32+ 0) /* Intel TPR Shadow */
diff --git a/arch/x86/include/asm/kaiser.h b/arch/x86/include/asm/kaiser.h
index 802bbbdfe143..5d85ddf26166 100644
--- a/arch/x86/include/asm/kaiser.h
+++ b/arch/x86/include/asm/kaiser.h
@@ -47,14 +47,14 @@ movq \reg, %cr3
 .endm
 
 .macro SWITCH_KERNEL_CR3
-ALTERNATIVE "jmp 8f", "pushq %rax", X86_FEATURE_KAISER
+ALTERNATIVE "jmp 8f", "pushq %rax", X86_FEATURE_PTI
 _SWITCH_TO_KERNEL_CR3 %rax
 popq %rax
 8:
 .endm
 
 .macro SWITCH_USER_CR3
-ALTERNATIVE "jmp 8f", "pushq %rax", X86_FEATURE_KAISER
+ALTERNATIVE "jmp 8f", "pushq %rax", X86_FEATURE_PTI
 _SWITCH_TO_USER_CR3 %rax %al
 popq %rax
 8:
@@ -63,7 +63,7 @@ popq %rax
 .macro SWITCH_KERNEL_CR3_NO_STACK
 ALTERNATIVE "jmp 8f", \
 	__stringify(movq %rax, PER_CPU_VAR(unsafe_stack_register_backup)), \
-	X86_FEATURE_KAISER
+	X86_FEATURE_PTI
 _SWITCH_TO_KERNEL_CR3 %rax
 movq PER_CPU_VAR(unsafe_stack_register_backup), %rax
 8:
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 95b57f4393b7..204dfb58c9f0 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1327,7 +1327,7 @@ ENTRY(paranoid_entry)
 	 * unconditionally, but we need to find out whether the reverse
 	 * should be done on return (conveyed to paranoid_exit in %ebx).
 	 */
-	ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER
+	ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_PTI
 	testl	$KAISER_SHADOW_PGD_OFFSET, %eax
 	jz	2f
 	orl	$2, %ebx
@@ -1361,7 +1361,7 @@ ENTRY(paranoid_exit)
 	TRACE_IRQS_OFF_DEBUG
 	TRACE_IRQS_IRETQ_DEBUG
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
-	/* No ALTERNATIVE for X86_FEATURE_KAISER: paranoid_entry sets %ebx */
+	/* No ALTERNATIVE for X86_FEATURE_PTI: paranoid_entry sets %ebx */
 	testl   $2, %ebx			/* SWITCH_USER_CR3 needed? */
 	jz      paranoid_exit_no_switch
 	SWITCH_USER_CR3
@@ -1567,7 +1567,7 @@ ENTRY(nmi)
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
 	/* Unconditionally use kernel CR3 for do_nmi() */
 	/* %rax is saved above, so OK to clobber here */
-	ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER
+	ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_PTI
 	/* If PCID enabled, NOFLUSH now and NOFLUSH on return */
 	ALTERNATIVE "", "bts $63, %rax", X86_FEATURE_PCID
 	pushq	%rax
@@ -1583,7 +1583,7 @@ ENTRY(nmi)
 	 * kernel code that needs user CR3, but do we ever return
 	 * to "user mode" where we need the kernel CR3?
 	 */
-	ALTERNATIVE "", "popq %rax; movq %rax, %cr3", X86_FEATURE_KAISER
+	ALTERNATIVE "", "popq %rax; movq %rax, %cr3", X86_FEATURE_PTI
 #endif
 	/*
 	 * Return back to user mode.  We must *not* do the normal exit
@@ -1806,7 +1806,7 @@ end_repeat_nmi:
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
 	/* Unconditionally use kernel CR3 for do_nmi() */
 	/* %rax is saved above, so OK to clobber here */
-	ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER
+	ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_PTI
 	/* If PCID enabled, NOFLUSH now and NOFLUSH on return */
 	ALTERNATIVE "", "bts $63, %rax", X86_FEATURE_PCID
 	pushq	%rax
@@ -1825,7 +1825,7 @@ end_repeat_nmi:
 	 * kernel code that needs user CR3, like just just before
 	 * a sysret.
 	 */
-	ALTERNATIVE "", "popq %rax; movq %rax, %cr3", X86_FEATURE_KAISER
+	ALTERNATIVE "", "popq %rax; movq %rax, %cr3", X86_FEATURE_PTI
 #endif
 
 	testl %ebx,%ebx				/* swapgs needed? */
diff --git a/arch/x86/mm/kaiser.c b/arch/x86/mm/kaiser.c
index 05fb616c9e2a..e37ac77e6cb6 100644
--- a/arch/x86/mm/kaiser.c
+++ b/arch/x86/mm/kaiser.c
@@ -289,14 +289,14 @@ skip:
 
 enable:
 	if (enable)
-		setup_force_cpu_cap(X86_FEATURE_KAISER);
+		setup_force_cpu_cap(X86_FEATURE_PTI);
 
 	return;
 
 disable:
 	pr_info("Kernel/User page tables isolation: disabled\n");
 	kaiser_enabled = 0;
-	setup_clear_cpu_cap(X86_FEATURE_KAISER);
+	setup_clear_cpu_cap(X86_FEATURE_PTI);
 }
 
 /*
-- 
2.16.2