All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yongseok Koh <yskoh@mellanox.com>
To: wenzhuo.lu@intel.com, jingjing.wu@intel.com,
	adrien.mazarguil@6wind.com, nelio.laranjeiro@6wind.com,
	olivier.matz@6wind.com
Cc: dev@dpdk.org, Yongseok Koh <yskoh@mellanox.com>
Subject: [PATCH v1 6/6] app/testpmd: conserve mbuf indirection flag
Date: Fri,  9 Mar 2018 17:25:32 -0800	[thread overview]
Message-ID: <20180310012532.15809-7-yskoh@mellanox.com> (raw)
In-Reply-To: <20180310012532.15809-1-yskoh@mellanox.com>

If PMD delivers Rx packets with mbuf indirection, ol_flags should not be
overwritten. For mlx5 PMD, if Multi-Packet RQ is enabled, Rx packets could
be indirect mbufs.

Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
---
 app/test-pmd/csumonly.c | 2 ++
 app/test-pmd/macfwd.c   | 2 ++
 app/test-pmd/macswap.c  | 2 ++
 3 files changed, 6 insertions(+)

diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
index 5f5ab64aa..1dd4d7130 100644
--- a/app/test-pmd/csumonly.c
+++ b/app/test-pmd/csumonly.c
@@ -770,6 +770,8 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
 			m->l4_len = info.l4_len;
 			m->tso_segsz = info.tso_segsz;
 		}
+		if (RTE_MBUF_INDIRECT(m))
+			tx_ol_flags |= IND_ATTACHED_MBUF;
 		m->ol_flags = tx_ol_flags;
 
 		/* Do split & copy for the packet. */
diff --git a/app/test-pmd/macfwd.c b/app/test-pmd/macfwd.c
index 2adce7019..7e096ee78 100644
--- a/app/test-pmd/macfwd.c
+++ b/app/test-pmd/macfwd.c
@@ -96,6 +96,8 @@ pkt_burst_mac_forward(struct fwd_stream *fs)
 				&eth_hdr->d_addr);
 		ether_addr_copy(&ports[fs->tx_port].eth_addr,
 				&eth_hdr->s_addr);
+		if (RTE_MBUF_INDIRECT(mb))
+			ol_flags |= IND_ATTACHED_MBUF;
 		mb->ol_flags = ol_flags;
 		mb->l2_len = sizeof(struct ether_hdr);
 		mb->l3_len = sizeof(struct ipv4_hdr);
diff --git a/app/test-pmd/macswap.c b/app/test-pmd/macswap.c
index e2cc4812c..39f96c1e0 100644
--- a/app/test-pmd/macswap.c
+++ b/app/test-pmd/macswap.c
@@ -127,6 +127,8 @@ pkt_burst_mac_swap(struct fwd_stream *fs)
 		ether_addr_copy(&eth_hdr->s_addr, &eth_hdr->d_addr);
 		ether_addr_copy(&addr, &eth_hdr->s_addr);
 
+		if (RTE_MBUF_INDIRECT(mb))
+			ol_flags |= IND_ATTACHED_MBUF;
 		mb->ol_flags = ol_flags;
 		mb->l2_len = sizeof(struct ether_hdr);
 		mb->l3_len = sizeof(struct ipv4_hdr);
-- 
2.11.0

  parent reply	other threads:[~2018-03-10  1:26 UTC|newest]

Thread overview: 86+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-10  1:25 [PATCH v1 0/6] net/mlx5: add Multi-Packet Rx support Yongseok Koh
2018-03-10  1:25 ` [PATCH v1 1/6] mbuf: add buffer offset field for flexible indirection Yongseok Koh
2018-03-10  1:25 ` [PATCH v1 2/6] net/mlx5: separate filling Rx flags Yongseok Koh
2018-03-10  1:25 ` [PATCH v1 3/6] net/mlx5: add a function to rdma-core glue Yongseok Koh
2018-03-12  9:13   ` Nélio Laranjeiro
2018-03-10  1:25 ` [PATCH v1 4/6] net/mlx5: add Multi-Packet Rx support Yongseok Koh
2018-03-12  9:20   ` Nélio Laranjeiro
2018-03-10  1:25 ` [PATCH v1 5/6] net/mlx5: release Tx queue resource earlier than Rx Yongseok Koh
2018-03-10  1:25 ` Yongseok Koh [this message]
2018-04-02 18:50 ` [PATCH v2 0/6] net/mlx5: add Multi-Packet Rx support Yongseok Koh
2018-04-02 18:50   ` [PATCH v2 1/6] mbuf: add buffer offset field for flexible indirection Yongseok Koh
2018-04-03  8:26     ` Olivier Matz
2018-04-04  0:12       ` Yongseok Koh
2018-04-09 16:04         ` Olivier Matz
2018-04-10  1:59           ` Yongseok Koh
2018-04-11  0:25             ` Ananyev, Konstantin
2018-04-11  5:33               ` Yongseok Koh
2018-04-11 11:39                 ` Ananyev, Konstantin
2018-04-11 14:02                   ` Andrew Rybchenko
2018-04-11 17:18                     ` Yongseok Koh
2018-04-11 17:08                   ` Yongseok Koh
2018-04-12 16:34                     ` Ananyev, Konstantin
2018-04-12 18:58                       ` Yongseok Koh
2018-04-02 18:50   ` [PATCH v2 2/6] net/mlx5: separate filling Rx flags Yongseok Koh
2018-04-02 18:50   ` [PATCH v2 3/6] net/mlx5: add a function to rdma-core glue Yongseok Koh
2018-04-02 18:50   ` [PATCH v2 4/6] net/mlx5: add Multi-Packet Rx support Yongseok Koh
2018-04-02 18:50   ` [PATCH v2 5/6] net/mlx5: release Tx queue resource earlier than Rx Yongseok Koh
2018-04-02 18:50   ` [PATCH v2 6/6] app/testpmd: conserve mbuf indirection flag Yongseok Koh
2018-04-19  1:11 ` [PATCH v3 1/2] mbuf: support attaching external buffer to mbuf Yongseok Koh
2018-04-19  1:11   ` [PATCH v3 2/2] app/testpmd: conserve offload flags of mbuf Yongseok Koh
2018-04-23 11:53   ` [PATCH v3 1/2] mbuf: support attaching external buffer to mbuf Ananyev, Konstantin
2018-04-24  2:04     ` Yongseok Koh
2018-04-25 13:16       ` Ananyev, Konstantin
2018-04-25 16:44         ` Yongseok Koh
2018-04-25 18:05           ` Ananyev, Konstantin
2018-04-23 16:18   ` Olivier Matz
2018-04-24  1:29     ` Yongseok Koh
2018-04-24 15:36       ` Olivier Matz
2018-04-24  1:38 ` [PATCH v4 " Yongseok Koh
2018-04-24  1:38   ` [PATCH v4 2/2] app/testpmd: conserve offload flags of mbuf Yongseok Koh
2018-04-24  5:01   ` [PATCH v4 1/2] mbuf: support attaching external buffer to mbuf Stephen Hemminger
2018-04-24 11:47     ` Yongseok Koh
2018-04-24 12:28   ` Andrew Rybchenko
2018-04-24 16:02     ` Olivier Matz
2018-04-24 18:21       ` ***Spam*** " Andrew Rybchenko
2018-04-24 19:15         ` Olivier Matz
2018-04-24 20:22           ` Thomas Monjalon
2018-04-24 21:53             ` Yongseok Koh
2018-04-24 22:15               ` Thomas Monjalon
2018-04-25  8:21               ` Olivier Matz
2018-04-25 15:06             ` Stephen Hemminger
2018-04-24 23:34           ` Yongseok Koh
2018-04-25 14:45             ` Andrew Rybchenko
2018-04-25 17:40               ` Yongseok Koh
2018-04-25  8:28       ` Olivier Matz
2018-04-25  9:08         ` Yongseok Koh
2018-04-25  9:19           ` Yongseok Koh
2018-04-25 20:00             ` Olivier Matz
2018-04-25 22:54               ` Yongseok Koh
2018-04-24 22:30     ` Yongseok Koh
2018-04-25  2:53 ` [PATCH v5 " Yongseok Koh
2018-04-25  2:53   ` [PATCH v5 2/2] app/testpmd: conserve offload flags of mbuf Yongseok Koh
2018-04-25 13:31   ` [PATCH v5 1/2] mbuf: support attaching external buffer to mbuf Ananyev, Konstantin
2018-04-25 17:06     ` Yongseok Koh
2018-04-25 17:23       ` Ananyev, Konstantin
2018-04-25 18:02         ` Yongseok Koh
2018-04-25 18:22           ` Yongseok Koh
2018-04-25 18:30             ` Yongseok Koh
2018-04-26  1:10 ` [PATCH v6 " Yongseok Koh
2018-04-26  1:10   ` [PATCH v6 2/2] app/testpmd: conserve offload flags of mbuf Yongseok Koh
2018-04-26 11:39   ` [PATCH v6 1/2] mbuf: support attaching external buffer to mbuf Ananyev, Konstantin
2018-04-26 16:05   ` Andrew Rybchenko
2018-04-26 16:10     ` Thomas Monjalon
2018-04-26 19:42       ` Olivier Matz
2018-04-26 19:58         ` Thomas Monjalon
2018-04-26 20:07           ` Olivier Matz
2018-04-26 20:24             ` Thomas Monjalon
2018-04-26 17:18     ` Yongseok Koh
2018-04-26 19:45       ` Olivier Matz
2018-04-27  0:01 ` [PATCH v7 " Yongseok Koh
2018-04-27  0:01   ` [PATCH v7 2/2] app/testpmd: conserve offload flags of mbuf Yongseok Koh
2018-04-27  8:00     ` Andrew Rybchenko
2018-04-27  7:22   ` [PATCH v7 1/2] mbuf: support attaching external buffer to mbuf Andrew Rybchenko
2018-04-27 17:22 ` [PATCH v8 " Yongseok Koh
2018-04-27 17:22   ` [PATCH v8 2/2] app/testpmd: conserve offload flags of mbuf Yongseok Koh
2018-04-27 18:09   ` [PATCH v8 1/2] mbuf: support attaching external buffer to mbuf Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180310012532.15809-7-yskoh@mellanox.com \
    --to=yskoh@mellanox.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=jingjing.wu@intel.com \
    --cc=nelio.laranjeiro@6wind.com \
    --cc=olivier.matz@6wind.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.