[net-next 0/6][pull request] 10GbE Intel Wired LAN Driver Updates 2018-03-12

[net-next 0/6][pull request] 10GbE Intel Wired LAN Driver Updates 2018-03-12

[Jeff Kirsher]

This series contains updates to ixgbe and ixgbevf only.

Shannon Nelson provides three fixes to the ipsec portion of ixgbe.  Make
sure we are using 128-bit authentication, since it is the only size
supported for hardware offload.  Fixed the transmit trailer length
calculation for ipsec by finding the padding value and adding it to the
authentication length, then save it off so that we can put it in the
transmit descriptor to tell the device where to stop the checksum
calculation.  Lastly, cleaned up useless and dead code.

Tonghao Zhang adds a ethtool stat for receive length errors, since the
driver was already collecting this counter.

Arnd Bergmann fixed a warning about an used variable by "rephrasing" the
code so that the compiler can see the use of the variable in question.

Paul fixes an issue where "HIDE_VLAN" was being cleared on VF reset, so
ensure to set "HIDE_VLAN" when port VLAN is enabled after a VF reset. 

The following are changes since commit 8b4c6ed2ed0e3d53e93e20e3f20cadf0d1a47483:
  Merge branch 'hns3-next'
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 10GbE

Arnd Bergmann (1):
  ixgbevf: fix unused variable warning

Paul Greenwalt (1):
  ixgbe: fix disabling hide VLAN on VF reset

Shannon Nelson (3):
  ixgbe: check for 128-bit authentication
  ixgbe: fix ipsec trailer length
  ixgbe: remove unneeded ipsec state free callback

Tonghao Zhang (1):
  ixgbe: Add receive length error counter

 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c  |  1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c    | 53 +++++++++++++++--------
 drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h    |  1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c    |  6 ++-
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 10 ++---
 5 files changed, 46 insertions(+), 25 deletions(-)

-- 
2.14.3

[net-next 1/6] ixgbe: check for 128-bit authentication

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@oracle.com>

Make sure the Security Association is using
a 128-bit authentication, since that's the only
size that the hardware offload supports.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 16 +++++++++++-----
 drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h |  1 +
 2 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
index 93eacddb6704..8b7dbc8057eb 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
@@ -423,15 +423,21 @@ static int ixgbe_ipsec_parse_proto_keys(struct xfrm_state *xs,
 	const char aes_gcm_name[] = "rfc4106(gcm(aes))";
 	int key_len;
 
-	if (xs->aead) {
-		key_data = &xs->aead->alg_key[0];
-		key_len = xs->aead->alg_key_len;
-		alg_name = xs->aead->alg_name;
-	} else {
+	if (!xs->aead) {
 		netdev_err(dev, "Unsupported IPsec algorithm\n");
 		return -EINVAL;
 	}
 
+	if (xs->aead->alg_icv_len != IXGBE_IPSEC_AUTH_BITS) {
+		netdev_err(dev, "IPsec offload requires %d bit authentication\n",
+			   IXGBE_IPSEC_AUTH_BITS);
+		return -EINVAL;
+	}
+
+	key_data = &xs->aead->alg_key[0];
+	key_len = xs->aead->alg_key_len;
+	alg_name = xs->aead->alg_name;
+
 	if (strcmp(alg_name, aes_gcm_name)) {
 		netdev_err(dev, "Unsupported IPsec algorithm - please use %s\n",
 			   aes_gcm_name);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h
index da3ce7849e85..87d2800b94ab 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h
@@ -32,6 +32,7 @@
 #define IXGBE_IPSEC_MAX_RX_IP_COUNT	128
 #define IXGBE_IPSEC_BASE_RX_INDEX	0
 #define IXGBE_IPSEC_BASE_TX_INDEX	IXGBE_IPSEC_MAX_SA_COUNT
+#define IXGBE_IPSEC_AUTH_BITS		128
 
 #define IXGBE_RXTXIDX_IPS_EN		0x00000001
 #define IXGBE_RXIDX_TBL_SHIFT		1
-- 
2.14.3

[net-next 2/6] ixgbe: fix ipsec trailer length

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@oracle.com>

Fix up the Tx trailer length calculation.  We can't believe the
trailer len from the xstate information because it was calculated
before the packet was put together and padding added.  This bit
of code finds the padding value in the trailer, adds it to the
authentication length, and saves it so later we can put it into
the Tx descriptor to tell the device where to stop the checksum
calculation.

Fixes: 592594704761 ("ixgbe: process the Tx ipsec offload")
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
index 8b7dbc8057eb..8623013e517e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
@@ -789,11 +789,33 @@ int ixgbe_ipsec_tx(struct ixgbe_ring *tx_ring,
 
 	itd->flags = 0;
 	if (xs->id.proto == IPPROTO_ESP) {
+		struct sk_buff *skb = first->skb;
+		int ret, authlen, trailerlen;
+		u8 padlen;
+
 		itd->flags |= IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP |
 			      IXGBE_ADVTXD_TUCMD_L4T_TCP;
 		if (first->protocol == htons(ETH_P_IP))
 			itd->flags |= IXGBE_ADVTXD_TUCMD_IPV4;
-		itd->trailer_len = xs->props.trailer_len;
+
+		/* The actual trailer length is authlen (16 bytes) plus
+		 * 2 bytes for the proto and the padlen values, plus
+		 * padlen bytes of padding.  This ends up not the same
+		 * as the static value found in xs->props.trailer_len (21).
+		 *
+		 * The "correct" way to get the auth length would be to use
+		 *    authlen = crypto_aead_authsize(xs->data);
+		 * but since we know we only have one size to worry about
+		 * we can let the compiler use the constant and save us a
+		 * few CPU cycles.
+		 */
+		authlen = IXGBE_IPSEC_AUTH_BITS / 8;
+
+		ret = skb_copy_bits(skb, skb->len - (authlen + 2), &padlen, 1);
+		if (unlikely(ret))
+			return 0;
+		trailerlen = authlen + 2 + padlen;
+		itd->trailer_len = trailerlen;
 	}
 	if (tsa->encrypt)
 		itd->flags |= IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN;
-- 
2.14.3

[net-next 3/6] ixgbe: remove unneeded ipsec state free callback

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@oracle.com>

With commit 7f05b467a735 ("xfrm: check for xdo_dev_state_free")
we no longer need to add an empty callback function
to the driver, so now let's remove the useless code.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
index 8623013e517e..f2254528dcfc 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
@@ -724,23 +724,10 @@ static bool ixgbe_ipsec_offload_ok(struct sk_buff *skb, struct xfrm_state *xs)
 	return true;
 }
 
-/**
- * ixgbe_ipsec_free - called by xfrm garbage collections
- * @xs: pointer to transformer state struct
- *
- * We don't have any garbage to collect, so we shouldn't bother
- * implementing this function, but the XFRM code doesn't check for
- * existence before calling the API callback.
- **/
-static void ixgbe_ipsec_free(struct xfrm_state *xs)
-{
-}
-
 static const struct xfrmdev_ops ixgbe_xfrmdev_ops = {
 	.xdo_dev_state_add = ixgbe_ipsec_add_sa,
 	.xdo_dev_state_delete = ixgbe_ipsec_del_sa,
 	.xdo_dev_offload_ok = ixgbe_ipsec_offload_ok,
-	.xdo_dev_state_free = ixgbe_ipsec_free,
 };
 
 /**
-- 
2.14.3

[net-next 4/6] ixgbe: Add receive length error counter

[Jeff Kirsher]

From: Tonghao Zhang <xiangxia.m.yue@gmail.com>

ixgbe enabled rlec counter and the rx_error used it.
We can export the counter directly via ethtool -S ethX.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 89edb9fae6f0..c0e6ab42e0e1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -97,6 +97,7 @@ static const struct ixgbe_stats ixgbe_gstrings_stats[] = {
 	{"tx_heartbeat_errors", IXGBE_NETDEV_STAT(tx_heartbeat_errors)},
 	{"tx_timeout_count", IXGBE_STAT(tx_timeout_count)},
 	{"tx_restart_queue", IXGBE_STAT(restart_queue)},
+	{"rx_length_errors", IXGBE_STAT(stats.rlec)},
 	{"rx_long_length_errors", IXGBE_STAT(stats.roc)},
 	{"rx_short_length_errors", IXGBE_STAT(stats.ruc)},
 	{"tx_flow_control_xon", IXGBE_STAT(stats.lxontxc)},
-- 
2.14.3

[net-next 5/6] ixgbevf: fix unused variable warning

[Jeff Kirsher]

From: Arnd Bergmann <arnd@arndb.de>

The new ixgbevf_set_rx_buffer_len() function causes a harmless warnings
in configurations with large page size:

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_set_rx_buffer_len':
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1758:15: error: unused variable 'max_frame' [-Werror=unused-variable]

This rephrases the code so that the compiler can see the use of that
variable, making it slightly easier to read in the process.

Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index f37307131eb6..4da449e0a4ba 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1766,12 +1766,12 @@ static void ixgbevf_set_rx_buffer_len(struct ixgbevf_adapter *adapter,
 
 	set_ring_build_skb_enabled(rx_ring);
 
-#if (PAGE_SIZE < 8192)
-	if (max_frame <= IXGBEVF_MAX_FRAME_BUILD_SKB)
-		return;
+	if (PAGE_SIZE < 8192) {
+		if (max_frame <= IXGBEVF_MAX_FRAME_BUILD_SKB)
+			return;
 
-	set_ring_uses_large_buffer(rx_ring);
-#endif
+		set_ring_uses_large_buffer(rx_ring);
+	}
 }
 
 /**
-- 
2.14.3

[net-next 6/6] ixgbe: fix disabling hide VLAN on VF reset

[Jeff Kirsher]

From: Paul Greenwalt <paul.greenwalt@intel.com>

If port VLAN is enabled, set PFQDE.HIDE_VLAN during VF reset.

Setting only PFQDE.PFQDE during VF reset was clearing PFQDE.HIDE_VLAN.

Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index 27a70a52f3c9..008aa073a679 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -831,7 +831,11 @@ static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
 	IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg);
 
 	/* force drop enable for all VF Rx queues */
-	ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE);
+	reg = IXGBE_QDE_ENABLE;
+	if (adapter->vfinfo[vf].pf_vlan)
+		reg |= IXGBE_QDE_HIDE_VLAN;
+
+	ixgbe_write_qde(adapter, vf, reg);
 
 	/* enable receive for vf */
 	reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
-- 
2.14.3

Re: [net-next 0/6][pull request] 10GbE Intel Wired LAN Driver Updates 2018-03-12

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Mon, 12 Mar 2018 13:12:09 -0700

> This series contains updates to ixgbe and ixgbevf only.

Pulled, thanks Jeff.