* Re: [PATCH 1/1] efi/libstub: tpm: zero initialize pointer variables for mixed mode
2018-03-13 14:09 ` [PATCH 1/1] efi/libstub: tpm: zero initialize pointer variables for mixed mode Ard Biesheuvel
@ 2018-03-13 15:10 ` Javier Martinez Canillas
2018-03-13 15:14 ` [tip:efi/urgent] efi/libstub/tpm: Initialize pointer variables to zero " tip-bot for Ard Biesheuvel
2018-03-16 13:02 ` [PATCH 1/1] efi/libstub: tpm: zero initialize pointer variables " Jarkko Sakkinen
2 siblings, 0 replies; 5+ messages in thread
From: Javier Martinez Canillas @ 2018-03-13 15:10 UTC (permalink / raw)
To: Ard Biesheuvel, linux-efi, Ingo Molnar, Thomas Gleixner
Cc: hdegoede, tweek, jarkko.sakkinen, linux-kernel, linux-integrity,
tpmdd-devel
[adding linux-integrity and tpmdd-devel since this was discussed in these ML too]
On 03/13/2018 03:09 PM, Ard Biesheuvel wrote:
> As reported by Jeremy, running the new TPM libstub code in mixed mode
> (i.e., 64-bit kernel on 32-bit UEFI) results in hangs when invoking
> the TCG2 protocol, or when accessing the log_tbl pool allocation.
>
> The reason turns out to be that in both cases, the 64-bit pointer
> variables are not fully initialized by the 32-bit EFI code, and so
> we should take care to zero initialize these variables beforehand,
> or we'll end up dereferencing bogus pointers.
>
> Reported-by: Jeremy Cline <jeremy@jcline.org>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
> drivers/firmware/efi/libstub/tpm.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/firmware/efi/libstub/tpm.c b/drivers/firmware/efi/libstub/tpm.c
> index da661bf8cb96..13c1edd37e96 100644
> --- a/drivers/firmware/efi/libstub/tpm.c
> +++ b/drivers/firmware/efi/libstub/tpm.c
> @@ -68,11 +68,11 @@ void efi_retrieve_tpm2_eventlog_1_2(efi_system_table_t *sys_table_arg)
> efi_guid_t linux_eventlog_guid = LINUX_EFI_TPM_EVENT_LOG_GUID;
> efi_status_t status;
> efi_physical_addr_t log_location, log_last_entry;
> - struct linux_efi_tpm_eventlog *log_tbl;
> + struct linux_efi_tpm_eventlog *log_tbl = NULL;
> unsigned long first_entry_addr, last_entry_addr;
> size_t log_size, last_entry_size;
> efi_bool_t truncated;
> - void *tcg2_protocol;
> + void *tcg2_protocol = NULL;
>
> status = efi_call_early(locate_protocol, &tcg2_guid, NULL,
> &tcg2_protocol);
>
Looks good to me.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Best regards,
--
Javier Martinez Canillas
Software Engineer - Desktop Hardware Enablement
Red Hat
^ permalink raw reply [flat|nested] 5+ messages in thread
* [tip:efi/urgent] efi/libstub/tpm: Initialize pointer variables to zero for mixed mode
2018-03-13 14:09 ` [PATCH 1/1] efi/libstub: tpm: zero initialize pointer variables for mixed mode Ard Biesheuvel
2018-03-13 15:10 ` Javier Martinez Canillas
@ 2018-03-13 15:14 ` tip-bot for Ard Biesheuvel
2018-03-16 13:02 ` [PATCH 1/1] efi/libstub: tpm: zero initialize pointer variables " Jarkko Sakkinen
2 siblings, 0 replies; 5+ messages in thread
From: tip-bot for Ard Biesheuvel @ 2018-03-13 15:14 UTC (permalink / raw)
To: linux-tip-commits
Cc: tglx, linux-kernel, jeremy, ard.biesheuvel, mingo, peterz, torvalds, hpa
Commit-ID: 79832f0b5f718e0023d9dd73e6845310609a564d
Gitweb: https://git.kernel.org/tip/79832f0b5f718e0023d9dd73e6845310609a564d
Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
AuthorDate: Tue, 13 Mar 2018 14:09:21 +0000
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Tue, 13 Mar 2018 15:28:29 +0100
efi/libstub/tpm: Initialize pointer variables to zero for mixed mode
As reported by Jeremy Cline, running the new TPM libstub code in mixed
mode (i.e., 64-bit kernel on 32-bit UEFI) results in hangs when invoking
the TCG2 protocol, or when accessing the log_tbl pool allocation.
The reason turns out to be that in both cases, the 64-bit pointer
variables are not fully initialized by the 32-bit EFI code, and so
we should take care to zero initialize these variables beforehand,
or we'll end up dereferencing bogus pointers.
Reported-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hdegoede@redhat.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: javierm@redhat.com
Cc: linux-efi@vger.kernel.org
Cc: tweek@google.com
Link: http://lkml.kernel.org/r/20180313140922.17266-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
drivers/firmware/efi/libstub/tpm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/efi/libstub/tpm.c b/drivers/firmware/efi/libstub/tpm.c
index da661bf8cb96..13c1edd37e96 100644
--- a/drivers/firmware/efi/libstub/tpm.c
+++ b/drivers/firmware/efi/libstub/tpm.c
@@ -68,11 +68,11 @@ void efi_retrieve_tpm2_eventlog_1_2(efi_system_table_t *sys_table_arg)
efi_guid_t linux_eventlog_guid = LINUX_EFI_TPM_EVENT_LOG_GUID;
efi_status_t status;
efi_physical_addr_t log_location, log_last_entry;
- struct linux_efi_tpm_eventlog *log_tbl;
+ struct linux_efi_tpm_eventlog *log_tbl = NULL;
unsigned long first_entry_addr, last_entry_addr;
size_t log_size, last_entry_size;
efi_bool_t truncated;
- void *tcg2_protocol;
+ void *tcg2_protocol = NULL;
status = efi_call_early(locate_protocol, &tcg2_guid, NULL,
&tcg2_protocol);
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] efi/libstub: tpm: zero initialize pointer variables for mixed mode
2018-03-13 14:09 ` [PATCH 1/1] efi/libstub: tpm: zero initialize pointer variables for mixed mode Ard Biesheuvel
2018-03-13 15:10 ` Javier Martinez Canillas
2018-03-13 15:14 ` [tip:efi/urgent] efi/libstub/tpm: Initialize pointer variables to zero " tip-bot for Ard Biesheuvel
@ 2018-03-16 13:02 ` Jarkko Sakkinen
2 siblings, 0 replies; 5+ messages in thread
From: Jarkko Sakkinen @ 2018-03-16 13:02 UTC (permalink / raw)
To: Ard Biesheuvel
Cc: linux-efi, Ingo Molnar, Thomas Gleixner, hdegoede, tweek,
javierm, linux-kernel
On Tue, Mar 13, 2018 at 02:09:21PM +0000, Ard Biesheuvel wrote:
> As reported by Jeremy, running the new TPM libstub code in mixed mode
> (i.e., 64-bit kernel on 32-bit UEFI) results in hangs when invoking
> the TCG2 protocol, or when accessing the log_tbl pool allocation.
>
> The reason turns out to be that in both cases, the 64-bit pointer
> variables are not fully initialized by the 32-bit EFI code, and so
> we should take care to zero initialize these variables beforehand,
> or we'll end up dereferencing bogus pointers.
>
> Reported-by: Jeremy Cline <jeremy@jcline.org>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
/Jarkko
^ permalink raw reply [flat|nested] 5+ messages in thread