All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: Dave Chinner <david@fromorbit.com>
Cc: linux-xfs@vger.kernel.org
Subject: Re: [PATCH 2/2] xfs: don't shrink the inode cache until after setup completes
Date: Wed, 21 Mar 2018 10:25:11 -0700	[thread overview]
Message-ID: <20180321172511.GE4818@magnolia> (raw)
In-Reply-To: <20180320050021.982-3-david@fromorbit.com>

On Tue, Mar 20, 2018 at 04:00:21PM +1100, Dave Chinner wrote:
> From: Dave Chinner <dchinner@redhat.com>
> 
> We recently came across an oops on a 4.14 kernel in
> xfs_reclaim_inodes_count() where sb->s_fs_info pointed to garbage
> and so the m_perag_tree lookup walked into lala land.
> 
> We found a mount in a failed state, blocked on teh shrinker rwsem
> here:
> 
> mount_bdev()
>   deactivate_locked_super()
>     unregister_shrinker()
> 
> Essentially, the machine was under memory pressure when the mount
> was being run, xfs_fs_fill_super() failed after allocating the
> xfs_mount and attaching it to sb->s_fs_info. It then cleaned up and
> freed the xfs_mount, but the sb->s_fs_info field still pointed to
> the freed memory. Hence when the superblock shrinker then ran
> it fell off the bad pointer.
> 
> Setting sb->s_fs_info to NULL in this case won't solve the problem;
> we'll still crash on a null pointer in xfs_reclaim_inodes_count().
> The problem is that the superblock shrinker is running before the
> filesystem structures it depends on have been fully set up. i.e.
> the shrinker is registered in sget(), before ->fill_super() has been
> called, and the shrinker can call into the filesystem before
> fill_super() does it's setup work.
> 
> The twist here is that we need the sb shrinker to run in the XFS
> mount process because of the memory pressure that log recovery and
> quota check can create. Hence we need to prevent the indoe cache
> scanning from occurring until after we've set up the per-ag
> structures and caches that it depends on. We also need to ensure
> that we clear the flag and sb->s_fs_info on failure so that we
> can do the right thing in all cases in xfs_reclaim_inodes_count().
> 
> Signed-Off-By: Dave Chinner <dchinner@redhat.com>
> ---
>  fs/xfs/xfs_mount.c | 2 ++
>  fs/xfs/xfs_mount.h | 1 +
>  fs/xfs/xfs_super.c | 9 +++++++++
>  3 files changed, 12 insertions(+)
> 
> diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
> index 6f5a5e6764d8..35a263c90fc0 100644
> --- a/fs/xfs/xfs_mount.c
> +++ b/fs/xfs/xfs_mount.c
> @@ -155,6 +155,7 @@ xfs_free_perag(
>  	xfs_agnumber_t	agno;
>  	struct xfs_perag *pag;
>  
> +	mp->m_flags &= ~XFS_MOUNT_PERAG_DONE;
>  	for (agno = 0; agno < mp->m_sb.sb_agcount; agno++) {
>  		spin_lock(&mp->m_perag_lock);
>  		pag = radix_tree_delete(&mp->m_perag_tree, agno);
> @@ -244,6 +245,7 @@ xfs_initialize_perag(
>  		*maxagi = index;
>  
>  	mp->m_ag_prealloc_blocks = xfs_prealloc_blocks(mp);
> +	mp->m_flags |= XFS_MOUNT_PERAG_DONE;
>  	return 0;
>  
>  out_hash_destroy:
> diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
> index 1808f56decaa..3cf7309b615d 100644
> --- a/fs/xfs/xfs_mount.h
> +++ b/fs/xfs/xfs_mount.h
> @@ -239,6 +239,7 @@ typedef struct xfs_mount {
>  #define XFS_MOUNT_FILESTREAMS	(1ULL << 24)	/* enable the filestreams
>  						   allocator */
>  #define XFS_MOUNT_NOATTR2	(1ULL << 25)	/* disable use of attr2 format */
> +#define XFS_MOUNT_PERAG_DONE	(1ULL << 26)	/* perag icache init done */
>  
>  #define XFS_MOUNT_DAX		(1ULL << 62)	/* TEST ONLY! */
>  
> diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
> index ee26437dc567..d3283e8c2ce2 100644
> --- a/fs/xfs/xfs_super.c
> +++ b/fs/xfs/xfs_super.c
> @@ -1755,6 +1755,7 @@ xfs_fs_fill_super(
>   out_close_devices:
>  	xfs_close_devices(mp);
>   out_free_fsname:
> +	sb->s_fs_info = NULL;
>  	xfs_free_fsname(mp);
>  	kfree(mp);
>   out:
> @@ -1800,6 +1801,14 @@ xfs_fs_nr_cached_objects(
>  	struct super_block	*sb,
>  	struct shrink_control	*sc)
>  {
> +	/*
> +	 * Don't do anything until the filesystem is fully set up, or in the
> +	 * process of being torn down due to a mount failure.
> +	 */
> +	if (!sb->s_fs_info)
> +		return 0;
> +	if (!(XFS_M(sb)->m_flags & XFS_MOUNT_PERAG_DONE))
> +		return 0;

I wonder, if we apply Brian's patch to kzalloc-and-init the mp, can we
replace XFS_MOUNT_PERAG_DONE flag checking with

	if (radix_tree_empty(&mp->m_perag_tree))
		return 0;

instead?

--D

>  	return xfs_reclaim_inodes_count(XFS_M(sb));
>  }
>  
> -- 
> 2.16.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

      parent reply	other threads:[~2018-03-21 17:25 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-20  5:00 [PATCH 0/2] xfs: fix mount vs shrinker race Dave Chinner
2018-03-20  5:00 ` [PATCH 1/2] xfs: add mount delay debug option Dave Chinner
2018-03-20 12:00   ` Brian Foster
2018-03-20 13:12     ` Dave Chinner
2018-03-20  5:00 ` [PATCH 2/2] xfs: don't shrink the inode cache until after setup completes Dave Chinner
2018-03-20 12:08   ` Brian Foster
2018-03-20 13:21     ` Dave Chinner
2018-03-20 14:21       ` Brian Foster
2018-03-20 22:33         ` Dave Chinner
2018-03-21 11:26           ` Brian Foster
2018-03-21 17:25   ` Darrick J. Wong [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180321172511.GE4818@magnolia \
    --to=darrick.wong@oracle.com \
    --cc=david@fromorbit.com \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.