All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Vivier <laurent@vivier.eu>
To: qemu-devel@nongnu.org
Cc: "Cornelia Huck" <cohuck@redhat.com>,
	qemu-s390x@nongnu.org, "Philippe Mathieu-Daudé" <f4bug@amsat.org>,
	"Laurent Vivier" <laurent@vivier.eu>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Riku Voipio" <riku.voipio@iki.fi>
Subject: [Qemu-devel] [PATCH for 2.13 11/19] linux-user: move cris cpu loop to cris directory
Date: Mon, 26 Mar 2018 21:15:55 +0200	[thread overview]
Message-ID: <20180326191603.10217-12-laurent@vivier.eu> (raw)
In-Reply-To: <20180326191603.10217-1-laurent@vivier.eu>

No code change, only move code from main.c to
cris/cpu_loop.c.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
 linux-user/cris/cpu_loop.c | 89 +++++++++++++++++++++++++++++++++++++++++++++
 linux-user/main.c          | 90 ----------------------------------------------
 2 files changed, 89 insertions(+), 90 deletions(-)

diff --git a/linux-user/cris/cpu_loop.c b/linux-user/cris/cpu_loop.c
index b7700a5561..96406e5c97 100644
--- a/linux-user/cris/cpu_loop.c
+++ b/linux-user/cris/cpu_loop.c
@@ -21,6 +21,95 @@
 #include "qemu.h"
 #include "cpu_loop-common.h"
 
+void cpu_loop(CPUCRISState *env)
+{
+    CPUState *cs = CPU(cris_env_get_cpu(env));
+    int trapnr, ret;
+    target_siginfo_t info;
+    
+    while (1) {
+        cpu_exec_start(cs);
+        trapnr = cpu_exec(cs);
+        cpu_exec_end(cs);
+        process_queued_cpu_work(cs);
+
+        switch (trapnr) {
+        case 0xaa:
+            {
+                info.si_signo = TARGET_SIGSEGV;
+                info.si_errno = 0;
+                /* XXX: check env->error_code */
+                info.si_code = TARGET_SEGV_MAPERR;
+                info._sifields._sigfault._addr = env->pregs[PR_EDA];
+                queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+            }
+            break;
+	case EXCP_INTERRUPT:
+	  /* just indicate that signals should be handled asap */
+	  break;
+        case EXCP_BREAK:
+            ret = do_syscall(env, 
+                             env->regs[9], 
+                             env->regs[10], 
+                             env->regs[11], 
+                             env->regs[12], 
+                             env->regs[13], 
+                             env->pregs[7], 
+                             env->pregs[11],
+                             0, 0);
+            if (ret == -TARGET_ERESTARTSYS) {
+                env->pc -= 2;
+            } else if (ret != -TARGET_QEMU_ESIGRETURN) {
+                env->regs[10] = ret;
+            }
+            break;
+        case EXCP_DEBUG:
+            {
+                int sig;
+
+                sig = gdb_handlesig(cs, TARGET_SIGTRAP);
+                if (sig)
+                  {
+                    info.si_signo = sig;
+                    info.si_errno = 0;
+                    info.si_code = TARGET_TRAP_BRKPT;
+                    queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+                  }
+            }
+            break;
+        case EXCP_ATOMIC:
+            cpu_exec_step_atomic(cs);
+            break;
+        default:
+            printf ("Unhandled trap: 0x%x\n", trapnr);
+            cpu_dump_state(cs, stderr, fprintf, 0);
+            exit(EXIT_FAILURE);
+        }
+        process_pending_signals (env);
+    }
+}
+
 void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs)
 {
+    CPUState *cpu = ENV_GET_CPU(env);
+    TaskState *ts = cpu->opaque;
+    struct image_info *info = ts->info;
+
+    env->regs[0] = regs->r0;
+    env->regs[1] = regs->r1;
+    env->regs[2] = regs->r2;
+    env->regs[3] = regs->r3;
+    env->regs[4] = regs->r4;
+    env->regs[5] = regs->r5;
+    env->regs[6] = regs->r6;
+    env->regs[7] = regs->r7;
+    env->regs[8] = regs->r8;
+    env->regs[9] = regs->r9;
+    env->regs[10] = regs->r10;
+    env->regs[11] = regs->r11;
+    env->regs[12] = regs->r12;
+    env->regs[13] = regs->r13;
+    env->regs[14] = info->start_stack;
+    env->regs[15] = regs->acr;
+    env->pc = regs->erp;
 }
diff --git a/linux-user/main.c b/linux-user/main.c
index 211148858e..560e4a5b6a 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -149,76 +149,6 @@ void fork_end(int child)
     }
 }
 
-#ifdef TARGET_CRIS
-void cpu_loop(CPUCRISState *env)
-{
-    CPUState *cs = CPU(cris_env_get_cpu(env));
-    int trapnr, ret;
-    target_siginfo_t info;
-    
-    while (1) {
-        cpu_exec_start(cs);
-        trapnr = cpu_exec(cs);
-        cpu_exec_end(cs);
-        process_queued_cpu_work(cs);
-
-        switch (trapnr) {
-        case 0xaa:
-            {
-                info.si_signo = TARGET_SIGSEGV;
-                info.si_errno = 0;
-                /* XXX: check env->error_code */
-                info.si_code = TARGET_SEGV_MAPERR;
-                info._sifields._sigfault._addr = env->pregs[PR_EDA];
-                queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
-            }
-            break;
-	case EXCP_INTERRUPT:
-	  /* just indicate that signals should be handled asap */
-	  break;
-        case EXCP_BREAK:
-            ret = do_syscall(env, 
-                             env->regs[9], 
-                             env->regs[10], 
-                             env->regs[11], 
-                             env->regs[12], 
-                             env->regs[13], 
-                             env->pregs[7], 
-                             env->pregs[11],
-                             0, 0);
-            if (ret == -TARGET_ERESTARTSYS) {
-                env->pc -= 2;
-            } else if (ret != -TARGET_QEMU_ESIGRETURN) {
-                env->regs[10] = ret;
-            }
-            break;
-        case EXCP_DEBUG:
-            {
-                int sig;
-
-                sig = gdb_handlesig(cs, TARGET_SIGTRAP);
-                if (sig)
-                  {
-                    info.si_signo = sig;
-                    info.si_errno = 0;
-                    info.si_code = TARGET_TRAP_BRKPT;
-                    queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
-                  }
-            }
-            break;
-        case EXCP_ATOMIC:
-            cpu_exec_step_atomic(cs);
-            break;
-        default:
-            printf ("Unhandled trap: 0x%x\n", trapnr);
-            cpu_dump_state(cs, stderr, fprintf, 0);
-            exit(EXIT_FAILURE);
-        }
-        process_pending_signals (env);
-    }
-}
-#endif
-
 #ifdef TARGET_MICROBLAZE
 void cpu_loop(CPUMBState *env)
 {
@@ -2287,26 +2217,6 @@ int main(int argc, char **argv, char **envp)
         env->ir[IR_SP] = regs->usp;
         env->pc = regs->pc;
     }
-#elif defined(TARGET_CRIS)
-    {
-	    env->regs[0] = regs->r0;
-	    env->regs[1] = regs->r1;
-	    env->regs[2] = regs->r2;
-	    env->regs[3] = regs->r3;
-	    env->regs[4] = regs->r4;
-	    env->regs[5] = regs->r5;
-	    env->regs[6] = regs->r6;
-	    env->regs[7] = regs->r7;
-	    env->regs[8] = regs->r8;
-	    env->regs[9] = regs->r9;
-	    env->regs[10] = regs->r10;
-	    env->regs[11] = regs->r11;
-	    env->regs[12] = regs->r12;
-	    env->regs[13] = regs->r13;
-	    env->regs[14] = info->start_stack;
-	    env->regs[15] = regs->acr;	    
-	    env->pc = regs->erp;
-    }
 #elif defined(TARGET_S390X)
     {
             int i;
-- 
2.14.3

  parent reply	other threads:[~2018-03-26 19:16 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-26 19:15 [Qemu-devel] [PATCH for 2.13 00/19] linux-user: move arch specific parts from main.c to arch directories Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 01/19] linux-user: create a dummy per arch cpu_loop.c Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 02/19] linux-user: move i386/x86_64 cpu loop to i386 directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 03/19] linux-user: move aarch64 cpu loop to aarch64 directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 04/19] linux-user: move arm cpu loop to arm directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 05/19] linux-user: move sparc/sparc64 cpu loop to sparc directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 06/19] linux-user: move ppc/ppc64 cpu loop to ppc directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 07/19] linux-user: move mips/mips64 cpu loop to mips directory Laurent Vivier
2018-03-27 22:21   ` Philippe Mathieu-Daudé
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 08/19] linux-user: move nios2 cpu loop to nios2 directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 09/19] linux-user: move openrisc cpu loop to openrisc directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 10/19] linux-user: move sh4 cpu loop to sh4 directory Laurent Vivier
2018-03-26 19:15 ` Laurent Vivier [this message]
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 12/19] linux-user: move microblaze cpu loop to microblaze directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 13/19] linux-user: move m68k cpu loop to m68k directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 14/19] linux-user: move alpha cpu loop to alpha directory Laurent Vivier
2018-03-27 22:22   ` Philippe Mathieu-Daudé
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 15/19] linux-user: move s390x cpu loop to s390x directory Laurent Vivier
2018-03-27  8:50   ` Cornelia Huck
2018-03-26 19:16 ` [Qemu-devel] [PATCH for 2.13 16/19] linux-user: move tilegx cpu loop to tilegx directory Laurent Vivier
2018-03-26 19:16 ` [Qemu-devel] [PATCH for 2.13 17/19] linux-user: move riscv cpu loop to riscv directory Laurent Vivier
2018-03-26 21:48   ` Michael Clark
2018-03-26 19:16 ` [Qemu-devel] [PATCH for 2.13 18/19] linux-user: move hppa cpu loop to hppa directory Laurent Vivier
2018-03-27 22:23   ` Philippe Mathieu-Daudé
2018-03-26 19:16 ` [Qemu-devel] [PATCH for 2.13 19/19] linux-user: move xtensa cpu loop to xtensa directory Laurent Vivier
2018-03-28  5:37 ` [Qemu-devel] [PATCH for 2.13 00/19] linux-user: move arch specific parts from main.c to arch directories Richard Henderson
2018-03-29  9:54 ` no-reply
2018-03-31  6:41 ` no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180326191603.10217-12-laurent@vivier.eu \
    --to=laurent@vivier.eu \
    --cc=cohuck@redhat.com \
    --cc=f4bug@amsat.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    --cc=riku.voipio@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.