From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Anton Gerasimov Subject: [PATCHv3] arm: dts: zynq: Add support for Z-turn board Date: Wed, 28 Mar 2018 16:17:34 +0200 Message-Id: <20180328141734.9811-1-tossel@gmail.com> In-Reply-To: <20180306213008.32448-1-tossel@gmail.com> References: <20180306213008.32448-1-tossel@gmail.com> To: devicetree@vger.kernel.org Cc: michal.simek@xilinx.com, robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, Anton Gerasimov List-ID: Add a dts for MYIR Z-turn board and respective target in Makefile. Signed-off-by: Anton Gerasimov --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/zynq-zturn.dts | 124 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 125 insertions(+) create mode 100644 arch/arm/boot/dts/zynq-zturn.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ade7a38543dc..4daa7d5d4db4 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1067,6 +1067,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zc702.dtb \ zynq-zc706.dtb \ zynq-zed.dtb \ + zynq-zturn.dtb \ zynq-zybo.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-db.dtb \ diff --git a/arch/arm/boot/dts/zynq-zturn.dts b/arch/arm/boot/dts/zynq-zturn.dts new file mode 100644 index 000000000000..8aa384b59b7f --- /dev/null +++ b/arch/arm/boot/dts/zynq-zturn.dts @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015 Andrea Merello + * Copyright (C) 2017 Alexander Graf + * + * Based on zynq-zed.dts which is: + * Copyright (C) 2011 - 2014 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * + */ + +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq Z-Turn MYIR Board"; + compatible = "myir,zynq-zturn", "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + serial1 = &uart0; + mmc0 = &sdhci0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + usr-led1 { + label = "usr-led1"; + gpios = <&gpio0 0x0 0x1>; + default-state = "off"; + }; + + usr-led2 { + label = "usr-led2"; + gpios = <&gpio0 0x9 0x1>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + K1 { + label = "K1"; + gpios = <&gpio0 0x32 0x1>; + linux,code = <0x66>; + gpio-key,wakeup; + autorepeat; + }; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&qspi { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0x0>; + }; +}; + +&sdhci0 { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&uart0 { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&uart1 { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&can0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + stlm75@49 { + status = "okay"; + compatible = "lm75"; + reg = <0x49>; + }; + + accelerometer@53 { + compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x"; + reg = <0x53>; + interrupt-parent = <&intc>; + interrupts = <0x0 0x1e 0x4>; + }; +}; -- 2.16.2