[PATCH AUTOSEL for 4.15 001/189] firewire-ohci: work around oversized DMA reads on JMicron controllers

[PATCH AUTOSEL for 4.15 001/189] firewire-ohci: work around oversized DMA reads on JMicron controllers

[Sasha Levin]

From: Hector Martin <marcan@marcan.st>

[ Upstream commit 188775181bc05f29372b305ef96485840e351fde ]

At least some JMicron controllers issue buggy oversized DMA reads when
fetching context descriptors, always fetching 0x20 bytes at once for
descriptors which are only 0x10 bytes long. This is often harmless, but
can cause page faults on modern systems with IOMMUs:

DMAR: [DMA Read] Request device [05:00.0] fault addr fff56000 [fault reason 06] PTE Read access is not set
firewire_ohci 0000:05:00.0: DMA context IT0 has stopped, error code: evt_descriptor_read

This works around the problem by always leaving 0x10 padding bytes at
the end of descriptor buffer pages, which should be harmless to do
unconditionally for controllers in case others have the same behavior.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/firewire/ohci.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index ccf52368a073..45c048751f3b 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -1128,7 +1128,13 @@ static int context_add_buffer(struct context *ctx)
 		return -ENOMEM;
 
 	offset = (void *)&desc->buffer - (void *)desc;
-	desc->buffer_size = PAGE_SIZE - offset;
+	/*
+	 * Some controllers, like JMicron ones, always issue 0x20-byte DMA reads
+	 * for descriptors, even 0x10-byte ones. This can cause page faults when
+	 * an IOMMU is in use and the oversized read crosses a page boundary.
+	 * Work around this by always leaving at least 0x10 bytes of padding.
+	 */
+	desc->buffer_size = PAGE_SIZE - offset - 0x10;
 	desc->buffer_bus = bus_addr + offset;
 	desc->used = 0;
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 002/189] x86/tsc: Allow TSC calibration without PIT

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 30c7e5b123673d5e570e238dbada2fb68a87212c ]

Zhang Rui reported that a Surface Pro 4 will fail to boot with
lapic=notscdeadline. Part of the problem is that that machine doesn't have
a PIT.

If, for some reason, the TSC init has to fall back to TSC calibration, it
relies on the PIT to be present.

Allow TSC calibration to reliably fall back to HPET.

The below results in an accurate TSC measurement when forced on a IVB:

  tsc: Unable to calibrate against PIT
  tsc: No reference (HPET/PMTIMER) available
  tsc: Unable to calibrate against PIT
  tsc: using HPET reference calibration
  tsc: Detected 2792.451 MHz processor

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: len.brown@intel.com
Cc: rui.zhang@intel.com
Link: https://lkml.kernel.org/r/20171222092243.333145937@infradead.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/include/asm/i8259.h |  5 +++++
 arch/x86/kernel/tsc.c        | 18 ++++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h
index c8376b40e882..5cdcdbd4d892 100644
--- a/arch/x86/include/asm/i8259.h
+++ b/arch/x86/include/asm/i8259.h
@@ -69,6 +69,11 @@ struct legacy_pic {
 extern struct legacy_pic *legacy_pic;
 extern struct legacy_pic null_legacy_pic;
 
+static inline bool has_legacy_pic(void)
+{
+	return legacy_pic != &null_legacy_pic;
+}
+
 static inline int nr_legacy_irqs(void)
 {
 	return legacy_pic->nr_legacy_irqs;
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index e169e85db434..a2c9dd8bfc6f 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -25,6 +25,7 @@
 #include <asm/geode.h>
 #include <asm/apic.h>
 #include <asm/intel-family.h>
+#include <asm/i8259.h>
 
 unsigned int __read_mostly cpu_khz;	/* TSC clocks / usec, not used here */
 EXPORT_SYMBOL(cpu_khz);
@@ -363,6 +364,20 @@ static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin)
 	unsigned long tscmin, tscmax;
 	int pitcnt;
 
+	if (!has_legacy_pic()) {
+		/*
+		 * Relies on tsc_early_delay_calibrate() to have given us semi
+		 * usable udelay(), wait for the same 50ms we would have with
+		 * the PIT loop below.
+		 */
+		udelay(10 * USEC_PER_MSEC);
+		udelay(10 * USEC_PER_MSEC);
+		udelay(10 * USEC_PER_MSEC);
+		udelay(10 * USEC_PER_MSEC);
+		udelay(10 * USEC_PER_MSEC);
+		return ULONG_MAX;
+	}
+
 	/* Set the Gate high, disable speaker */
 	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
 
@@ -487,6 +502,9 @@ static unsigned long quick_pit_calibrate(void)
 	u64 tsc, delta;
 	unsigned long d1, d2;
 
+	if (!has_legacy_pic())
+		return 0;
+
 	/* Set the Gate high, disable speaker */
 	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 003/189] NFSv4: always set NFS_LOCK_LOST when a lock is lost.

[Sasha Levin]

From: NeilBrown <neilb@suse.com>

[ Upstream commit dce2630c7da73b0634686bca557cc8945cc450c8 ]

There are 2 comments in the NFSv4 code which suggest that
SIGLOST should possibly be sent to a process.  In these
cases a lock has been lost.
The current practice is to set NFS_LOCK_LOST so that
read/write returns EIO when a lock is lost.
So change these comments to code when sets NFS_LOCK_LOST.

One case is when lock recovery after apparent server restart
fails with NFS4ERR_DENIED, NFS4ERR_RECLAIM_BAD, or
NFS4ERRO_RECLAIM_CONFLICT.  The other case is when a lock
attempt as part of lease recovery fails with NFS4ERR_DENIED.

In an ideal world, these should not happen.  However I have
a packet trace showing an NFSv4.1 session getting
NFS4ERR_BADSESSION after an extended network parition.  The
NFSv4.1 client treats this like server reboot until/unless
it get NFS4ERR_NO_GRACE, in which case it switches over to
"nograce" recovery mode.  In this network trace, the client
attempts to recover a lock and the server (incorrectly)
reports NFS4ERR_DENIED rather than NFS4ERR_NO_GRACE.  This
leads to the ineffective comment and the client then
continues to write using the OPEN stateid.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/nfs/nfs4proc.c  | 12 ++++++++----
 fs/nfs/nfs4state.c |  5 ++++-
 2 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 56fa5a16e097..083802f7a1e9 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2019,7 +2019,7 @@ static int nfs4_open_reclaim(struct nfs4_state_owner *sp, struct nfs4_state *sta
 	return ret;
 }
 
-static int nfs4_handle_delegation_recall_error(struct nfs_server *server, struct nfs4_state *state, const nfs4_stateid *stateid, int err)
+static int nfs4_handle_delegation_recall_error(struct nfs_server *server, struct nfs4_state *state, const nfs4_stateid *stateid, struct file_lock *fl, int err)
 {
 	switch (err) {
 		default:
@@ -2066,7 +2066,11 @@ static int nfs4_handle_delegation_recall_error(struct nfs_server *server, struct
 			return -EAGAIN;
 		case -ENOMEM:
 		case -NFS4ERR_DENIED:
-			/* kill_proc(fl->fl_pid, SIGLOST, 1); */
+			if (fl) {
+				struct nfs4_lock_state *lsp = fl->fl_u.nfs4_fl.owner;
+				if (lsp)
+					set_bit(NFS_LOCK_LOST, &lsp->ls_flags);
+			}
 			return 0;
 	}
 	return err;
@@ -2102,7 +2106,7 @@ int nfs4_open_delegation_recall(struct nfs_open_context *ctx,
 		err = nfs4_open_recover_helper(opendata, FMODE_READ);
 	}
 	nfs4_opendata_put(opendata);
-	return nfs4_handle_delegation_recall_error(server, state, stateid, err);
+	return nfs4_handle_delegation_recall_error(server, state, stateid, NULL, err);
 }
 
 static void nfs4_open_confirm_prepare(struct rpc_task *task, void *calldata)
@@ -6739,7 +6743,7 @@ int nfs4_lock_delegation_recall(struct file_lock *fl, struct nfs4_state *state,
 	if (err != 0)
 		return err;
 	err = _nfs4_do_setlk(state, F_SETLK, fl, NFS_LOCK_NEW);
-	return nfs4_handle_delegation_recall_error(server, state, stateid, err);
+	return nfs4_handle_delegation_recall_error(server, state, stateid, fl, err);
 }
 
 struct nfs_release_lockowner_data {
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index e4f4a09ed9f4..91a4d4eeb235 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -1482,6 +1482,7 @@ static int nfs4_reclaim_locks(struct nfs4_state *state, const struct nfs4_state_
 	struct inode *inode = state->inode;
 	struct nfs_inode *nfsi = NFS_I(inode);
 	struct file_lock *fl;
+	struct nfs4_lock_state *lsp;
 	int status = 0;
 	struct file_lock_context *flctx = inode->i_flctx;
 	struct list_head *list;
@@ -1522,7 +1523,9 @@ restart:
 		case -NFS4ERR_DENIED:
 		case -NFS4ERR_RECLAIM_BAD:
 		case -NFS4ERR_RECLAIM_CONFLICT:
-			/* kill_proc(fl->fl_pid, SIGLOST, 1); */
+			lsp = fl->fl_u.nfs4_fl.owner;
+			if (lsp)
+				set_bit(NFS_LOCK_LOST, &lsp->ls_flags);
 			status = 0;
 		}
 		spin_lock(&flctx->flc_lock);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 004/189] nvme: host delete_work and reset_work on separate workqueues

[Sasha Levin]

From: Roy Shterman <roys@lightbitslabs.com>

[ Upstream commit b227c59b9b5b8ae52639c8980af853d2f654f90a ]

We need to ensure that delete_work will be hosted on a different
workqueue than all the works we flush or cancel from it.
Otherwise we may hit a circular dependency warning [1].

Also, given that delete_work flushes reset_work, host reset_work
on nvme_reset_wq and delete_work on nvme_delete_wq. In addition,
fix the flushing in the individual drivers to flush nvme_delete_wq
when draining queued deletes.

[1]:
[  178.491942] =============================================
[  178.492718] [ INFO: possible recursive locking detected ]
[  178.493495] 4.9.0-rc4-c844263313a8-lb #3 Tainted: G           OE
[  178.494382] ---------------------------------------------
[  178.495160] kworker/5:1/135 is trying to acquire lock:
[  178.495894]  (
[  178.496120] "nvme-wq"
[  178.496471] ){++++.+}
[  178.496599] , at:
[  178.496921] [<ffffffffa70ac206>] flush_work+0x1a6/0x2d0
[  178.497670]
               but task is already holding lock:
[  178.498499]  (
[  178.498724] "nvme-wq"
[  178.499074] ){++++.+}
[  178.499202] , at:
[  178.499520] [<ffffffffa70ad6c2>] process_one_work+0x162/0x6a0
[  178.500343]
               other info that might help us debug this:
[  178.501269]  Possible unsafe locking scenario:

[  178.502113]        CPU0
[  178.502472]        ----
[  178.502829]   lock(
[  178.503115] "nvme-wq"
[  178.503467] );
[  178.503716]   lock(
[  178.504001] "nvme-wq"
[  178.504353] );
[  178.504601]
                *** DEADLOCK ***

[  178.505441]  May be due to missing lock nesting notation

[  178.506453] 2 locks held by kworker/5:1/135:
[  178.507068]  #0:
[  178.507330]  (
[  178.507598] "nvme-wq"
[  178.507726] ){++++.+}
[  178.508079] , at:
[  178.508173] [<ffffffffa70ad6c2>] process_one_work+0x162/0x6a0
[  178.509004]  #1:
[  178.509265]  (
[  178.509532] (&ctrl->delete_work)
[  178.509795] ){+.+.+.}
[  178.510145] , at:
[  178.510239] [<ffffffffa70ad6c2>] process_one_work+0x162/0x6a0
[  178.511070]
               stack backtrace:
:
[  178.511693] CPU: 5 PID: 135 Comm: kworker/5:1 Tainted: G           OE   4.9.0-rc4-c844263313a8-lb #3
[  178.512974] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1ubuntu1 04/01/2014
[  178.514247] Workqueue: nvme-wq nvme_del_ctrl_work [nvme_tcp]
[  178.515071]  ffffc2668175bae0 ffffffffa7450823 ffffffffa88abd80 ffffffffa88abd80
[  178.516195]  ffffc2668175bb98 ffffffffa70eb012 ffffffffa8d8d90d ffff9c472e9ea700
[  178.517318]  ffff9c472e9ea700 ffff9c4700000000 ffff9c4700007200 ab83be61bec0d50e
[  178.518443] Call Trace:
[  178.518807]  [<ffffffffa7450823>] dump_stack+0x85/0xc2
[  178.519542]  [<ffffffffa70eb012>] __lock_acquire+0x17d2/0x18f0
[  178.520377]  [<ffffffffa75839a7>] ? serial8250_console_putchar+0x27/0x30
[  178.521330]  [<ffffffffa7583980>] ? wait_for_xmitr+0xa0/0xa0
[  178.522174]  [<ffffffffa70ac1eb>] ? flush_work+0x18b/0x2d0
[  178.522975]  [<ffffffffa70eb7cb>] lock_acquire+0x11b/0x220
[  178.523753]  [<ffffffffa70ac206>] ? flush_work+0x1a6/0x2d0
[  178.524535]  [<ffffffffa70ac229>] flush_work+0x1c9/0x2d0
[  178.525291]  [<ffffffffa70ac206>] ? flush_work+0x1a6/0x2d0
[  178.526077]  [<ffffffffa70a9cf0>] ? flush_workqueue_prep_pwqs+0x220/0x220
[  178.527040]  [<ffffffffa70ae7cf>] __cancel_work_timer+0x10f/0x1d0
[  178.527907]  [<ffffffffa70fecb9>] ? vprintk_default+0x29/0x40
[  178.528726]  [<ffffffffa71cb507>] ? printk+0x48/0x50
[  178.529434]  [<ffffffffa70ae8c3>] cancel_delayed_work_sync+0x13/0x20
[  178.530381]  [<ffffffffc042100b>] nvme_stop_ctrl+0x5b/0x70 [nvme_core]
[  178.531314]  [<ffffffffc0403dcc>] nvme_del_ctrl_work+0x2c/0x50 [nvme_tcp]
[  178.532271]  [<ffffffffa70ad741>] process_one_work+0x1e1/0x6a0
[  178.533101]  [<ffffffffa70ad6c2>] ? process_one_work+0x162/0x6a0
[  178.533954]  [<ffffffffa70adc4e>] worker_thread+0x4e/0x490
[  178.534735]  [<ffffffffa70adc00>] ? process_one_work+0x6a0/0x6a0
[  178.535588]  [<ffffffffa70adc00>] ? process_one_work+0x6a0/0x6a0
[  178.536441]  [<ffffffffa70b48cf>] kthread+0xff/0x120
[  178.537149]  [<ffffffffa70b47d0>] ? kthread_park+0x60/0x60
[  178.538094]  [<ffffffffa70b47d0>] ? kthread_park+0x60/0x60
[  178.538900]  [<ffffffffa78e332a>] ret_from_fork+0x2a/0x40

Signed-off-by: Roy Shterman <roys@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/nvme/host/core.c   | 44 +++++++++++++++++++++++++++++++++++++++-----
 drivers/nvme/host/nvme.h   |  2 ++
 drivers/nvme/host/rdma.c   |  2 +-
 drivers/nvme/target/loop.c |  2 +-
 4 files changed, 43 insertions(+), 7 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 935593032123..93a4fa053e7f 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -65,9 +65,26 @@ static bool streams;
 module_param(streams, bool, 0644);
 MODULE_PARM_DESC(streams, "turn on support for Streams write directives");
 
+/*
+ * nvme_wq - hosts nvme related works that are not reset or delete
+ * nvme_reset_wq - hosts nvme reset works
+ * nvme_delete_wq - hosts nvme delete works
+ *
+ * nvme_wq will host works such are scan, aen handling, fw activation,
+ * keep-alive error recovery, periodic reconnects etc. nvme_reset_wq
+ * runs reset works which also flush works hosted on nvme_wq for
+ * serialization purposes. nvme_delete_wq host controller deletion
+ * works which flush reset works for serialization.
+ */
 struct workqueue_struct *nvme_wq;
 EXPORT_SYMBOL_GPL(nvme_wq);
 
+struct workqueue_struct *nvme_reset_wq;
+EXPORT_SYMBOL_GPL(nvme_reset_wq);
+
+struct workqueue_struct *nvme_delete_wq;
+EXPORT_SYMBOL_GPL(nvme_delete_wq);
+
 static DEFINE_IDA(nvme_subsystems_ida);
 static LIST_HEAD(nvme_subsystems);
 static DEFINE_MUTEX(nvme_subsystems_lock);
@@ -89,7 +106,7 @@ int nvme_reset_ctrl(struct nvme_ctrl *ctrl)
 {
 	if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING))
 		return -EBUSY;
-	if (!queue_work(nvme_wq, &ctrl->reset_work))
+	if (!queue_work(nvme_reset_wq, &ctrl->reset_work))
 		return -EBUSY;
 	return 0;
 }
@@ -122,7 +139,7 @@ int nvme_delete_ctrl(struct nvme_ctrl *ctrl)
 {
 	if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_DELETING))
 		return -EBUSY;
-	if (!queue_work(nvme_wq, &ctrl->delete_work))
+	if (!queue_work(nvme_delete_wq, &ctrl->delete_work))
 		return -EBUSY;
 	return 0;
 }
@@ -3491,16 +3508,26 @@ EXPORT_SYMBOL_GPL(nvme_reinit_tagset);
 
 int __init nvme_core_init(void)
 {
-	int result;
+	int result = -ENOMEM;
 
 	nvme_wq = alloc_workqueue("nvme-wq",
 			WQ_UNBOUND | WQ_MEM_RECLAIM | WQ_SYSFS, 0);
 	if (!nvme_wq)
-		return -ENOMEM;
+		goto out;
+
+	nvme_reset_wq = alloc_workqueue("nvme-reset-wq",
+			WQ_UNBOUND | WQ_MEM_RECLAIM | WQ_SYSFS, 0);
+	if (!nvme_reset_wq)
+		goto destroy_wq;
+
+	nvme_delete_wq = alloc_workqueue("nvme-delete-wq",
+			WQ_UNBOUND | WQ_MEM_RECLAIM | WQ_SYSFS, 0);
+	if (!nvme_delete_wq)
+		goto destroy_reset_wq;
 
 	result = alloc_chrdev_region(&nvme_chr_devt, 0, NVME_MINORS, "nvme");
 	if (result < 0)
-		goto destroy_wq;
+		goto destroy_delete_wq;
 
 	nvme_class = class_create(THIS_MODULE, "nvme");
 	if (IS_ERR(nvme_class)) {
@@ -3519,8 +3546,13 @@ destroy_class:
 	class_destroy(nvme_class);
 unregister_chrdev:
 	unregister_chrdev_region(nvme_chr_devt, NVME_MINORS);
+destroy_delete_wq:
+	destroy_workqueue(nvme_delete_wq);
+destroy_reset_wq:
+	destroy_workqueue(nvme_reset_wq);
 destroy_wq:
 	destroy_workqueue(nvme_wq);
+out:
 	return result;
 }
 
@@ -3530,6 +3562,8 @@ void nvme_core_exit(void)
 	class_destroy(nvme_subsys_class);
 	class_destroy(nvme_class);
 	unregister_chrdev_region(nvme_chr_devt, NVME_MINORS);
+	destroy_workqueue(nvme_delete_wq);
+	destroy_workqueue(nvme_reset_wq);
 	destroy_workqueue(nvme_wq);
 }
 
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 55c49a1aa231..d320df9ab588 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -32,6 +32,8 @@ extern unsigned int admin_timeout;
 #define NVME_KATO_GRACE		10
 
 extern struct workqueue_struct *nvme_wq;
+extern struct workqueue_struct *nvme_reset_wq;
+extern struct workqueue_struct *nvme_delete_wq;
 
 enum {
 	NVME_NS_LBA		= 0,
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 2a0bba7f50cf..145aa97067d4 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -2040,7 +2040,7 @@ static void nvme_rdma_remove_one(struct ib_device *ib_device, void *client_data)
 	}
 	mutex_unlock(&nvme_rdma_ctrl_mutex);
 
-	flush_workqueue(nvme_wq);
+	flush_workqueue(nvme_delete_wq);
 }
 
 static struct ib_client nvme_rdma_ib_client = {
diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c
index 1e21b286f299..5d8054f9a412 100644
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -716,7 +716,7 @@ static void __exit nvme_loop_cleanup_module(void)
 		nvme_delete_ctrl(&ctrl->ctrl);
 	mutex_unlock(&nvme_loop_ctrl_mutex);
 
-	flush_workqueue(nvme_wq);
+	flush_workqueue(nvme_delete_wq);
 }
 
 module_init(nvme_loop_init_module);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 005/189] hwmon: (ina2xx) Fix access to uninitialized mutex

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 0c4c5860e9983eb3da7a3d73ca987643c3ed034b ]

Initialize data->config_lock mutex before it is used by the driver code.

This fixes following warning on Odroid XU3 boards:

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c0111504>] (unwind_backtrace) from [<c010dbec>] (show_stack+0x10/0x14)
[<c010dbec>] (show_stack) from [<c09b3f74>] (dump_stack+0x90/0xc8)
[<c09b3f74>] (dump_stack) from [<c0179528>] (register_lock_class+0x1c0/0x59c)
[<c0179528>] (register_lock_class) from [<c017bd1c>] (__lock_acquire+0x78/0x1850)
[<c017bd1c>] (__lock_acquire) from [<c017de30>] (lock_acquire+0xc8/0x2b8)
[<c017de30>] (lock_acquire) from [<c09ca59c>] (__mutex_lock+0x60/0xa0c)
[<c09ca59c>] (__mutex_lock) from [<c09cafd0>] (mutex_lock_nested+0x1c/0x24)
[<c09cafd0>] (mutex_lock_nested) from [<c068b0d0>] (ina2xx_set_shunt+0x70/0xb0)
[<c068b0d0>] (ina2xx_set_shunt) from [<c068b218>] (ina2xx_probe+0x88/0x1b0)
[<c068b218>] (ina2xx_probe) from [<c0673d90>] (i2c_device_probe+0x1e0/0x2d0)
[<c0673d90>] (i2c_device_probe) from [<c053a268>] (driver_probe_device+0x2b8/0x4a0)
[<c053a268>] (driver_probe_device) from [<c053a54c>] (__driver_attach+0xfc/0x120)
[<c053a54c>] (__driver_attach) from [<c05384cc>] (bus_for_each_dev+0x58/0x7c)
[<c05384cc>] (bus_for_each_dev) from [<c0539590>] (bus_add_driver+0x174/0x250)
[<c0539590>] (bus_add_driver) from [<c053b5e0>] (driver_register+0x78/0xf4)
[<c053b5e0>] (driver_register) from [<c0675ef0>] (i2c_register_driver+0x38/0xa8)
[<c0675ef0>] (i2c_register_driver) from [<c0102b40>] (do_one_initcall+0x48/0x18c)
[<c0102b40>] (do_one_initcall) from [<c0e00df0>] (kernel_init_freeable+0x110/0x1d4)
[<c0e00df0>] (kernel_init_freeable) from [<c09c8120>] (kernel_init+0x8/0x114)
[<c09c8120>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20)

Fixes: 5d389b125186 ("hwmon: (ina2xx) Make calibration register value fixed")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/hwmon/ina2xx.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 62e38fa8cda2..a55823b52b2f 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -438,6 +438,7 @@ static int ina2xx_probe(struct i2c_client *client,
 
 	/* set the device type */
 	data->config = &ina2xx_config[chip];
+	mutex_init(&data->config_lock);
 
 	if (of_property_read_u32(dev->of_node, "shunt-resistor", &val) < 0) {
 		struct ina2xx_platform_data *pdata = dev_get_platdata(dev);
@@ -467,8 +468,6 @@ static int ina2xx_probe(struct i2c_client *client,
 		return -ENODEV;
 	}
 
-	mutex_init(&data->config_lock);
-
 	data->groups[group++] = &ina2xx_group;
 	if (id->driver_data == ina226)
 		data->groups[group++] = &ina226_group;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 006/189] ACPI / LPSS: Do not instiate platform_dev for devs without MMIO resources

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit e1681599345b8466786b6e54a2db2a00a068a3f3 ]

acpi_lpss_create_device() skips handling LPSS devices which do not have
a mmio resources in their resource list (typically these devices are
disabled by the firmware). But since the LPSS code does not bind to the
device, acpi_bus_attach() ends up still creating a platform device for
it and the regular platform_driver for the ACPI HID still tries to bind
to it.

This happens e.g. on some boards which do not use the pwm-controller
and have an empty or invalid resource-table for it. Currently this causes
these error messages to get logged:

[    3.281966] pwm-lpss 80862288:00: invalid resource
[    3.287098] pwm-lpss: probe of 80862288:00 failed with error -22

This commit stops the undesirable creation of a platform_device for
disabled LPSS devices by setting pnp.type.platform_id to 0. Note that
acpi_scan_attach_handler() also sets pnp.type.platform_id to 0 when there
is a matching handler for the device and that handler has no attach
callback, so we simply behave as a handler without an attach function
in this case.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/acpi/acpi_lpss.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 7f2b02cc8ea1..c71f5a2a592e 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -465,6 +465,8 @@ static int acpi_lpss_create_device(struct acpi_device *adev,
 	acpi_dev_free_resource_list(&resource_list);
 
 	if (!pdata->mmio_base) {
+		/* Avoid acpi_bus_attach() instantiating a pdev for this dev. */
+		adev->pnp.type.platform_id = 0;
 		/* Skip the device, but continue the namespace scan. */
 		ret = 0;
 		goto err_out;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 008/189] ALSA: hda - Use IS_REACHABLE() for dependency on input

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit c469652bb5e8fb715db7d152f46d33b3740c9b87 ]

The commit ffcd28d88e4f ("ALSA: hda - Select INPUT for Realtek
HD-audio codec") introduced the reverse-selection of CONFIG_INPUT for
Realtek codec in order to avoid the mess with dependency between
built-in and modules.  Later on, we obtained IS_REACHABLE() macro
exactly for this kind of problems, and now we can remove th INPUT
selection in Kconfig and put IS_REACHABLE(INPUT) to the appropriate
places in the code, so that the driver doesn't need to select other
subsystem forcibly.

Fixes: ffcd28d88e4f ("ALSA: hda - Select INPUT for Realtek HD-audio codec")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # and build-tested
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/pci/hda/Kconfig         | 1 -
 sound/pci/hda/patch_realtek.c | 5 +++++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index 7f3b5ed81995..f7a492c382d9 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -88,7 +88,6 @@ config SND_HDA_PATCH_LOADER
 config SND_HDA_CODEC_REALTEK
 	tristate "Build Realtek HD-audio codec support"
 	select SND_HDA_GENERIC
-	select INPUT
 	help
 	  Say Y or M here to include Realtek HD-audio codec support in
 	  snd-hda-intel driver, such as ALC880.
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 206774703a33..ac7ef3957159 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3744,6 +3744,7 @@ static void alc280_fixup_hp_gpio4(struct hda_codec *codec,
 	}
 }
 
+#if IS_REACHABLE(INPUT)
 static void gpio2_mic_hotkey_event(struct hda_codec *codec,
 				   struct hda_jack_callback *event)
 {
@@ -3876,6 +3877,10 @@ static void alc233_fixup_lenovo_line2_mic_hotkey(struct hda_codec *codec,
 		spec->kb_dev = NULL;
 	}
 }
+#else /* INPUT */
+#define alc280_fixup_hp_gpio2_mic_hotkey	NULL
+#define alc233_fixup_lenovo_line2_mic_hotkey	NULL
+#endif /* INPUT */
 
 static void alc269_fixup_hp_line1_mic1_led(struct hda_codec *codec,
 				const struct hda_fixup *fix, int action)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 007/189] tipc: fix a potental access after delete in tipc_sk_join()

[Sasha Levin]

From: Jon Maloy <jon.maloy@ericsson.com>

[ Upstream commit febafc8455fdbb0ba53d596075068a683b75f355 ]

In commit d12d2e12cec2 "tipc: send out join messages as soon as new
member is discovered") we added a call to the function tipc_group_join()
without considering the case that the preceding tipc_sk_publish() might
have failed, and the group item already deleted.

We fix this by returning from tipc_sk_join() directly after the
failed tipc_sk_publish.

Reported-by: syzbot+e3eeae78ea88b8d6d858@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/tipc/socket.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 3b4084480377..8efd2e42de30 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -2759,6 +2759,7 @@ static int tipc_sk_join(struct tipc_sock *tsk, struct tipc_group_req *mreq)
 	if (rc) {
 		tipc_group_delete(net, grp);
 		tsk->group = NULL;
+		return rc;
 	}
 
 	/* Eliminate any risk that a broadcast overtakes the sent JOIN */
-- 
2.15.1

[PATCH AUTOSEL for 4.15 009/189] ASoC: au1x: Fix timeout tests in au1xac97c_ac97_read()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 123af9043e93cb6f235207d260d50f832cdb5439 ]

The loop timeout doesn't work because it's a post op and ends with "tmo"
set to -1.  I changed it from a post-op to a pre-op and I changed the
initial the starting value from 5 to 6 so we still iterate 5 times.  I
left the other as it was because it's a large number.

Fixes: b3c70c9ea62a ("ASoC: Alchemy AC97C/I2SC audio support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/au1x/ac97c.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/au1x/ac97c.c b/sound/soc/au1x/ac97c.c
index 29a97d52e8ad..66d6c52e7761 100644
--- a/sound/soc/au1x/ac97c.c
+++ b/sound/soc/au1x/ac97c.c
@@ -91,8 +91,8 @@ static unsigned short au1xac97c_ac97_read(struct snd_ac97 *ac97,
 	do {
 		mutex_lock(&ctx->lock);
 
-		tmo = 5;
-		while ((RD(ctx, AC97_STATUS) & STAT_CP) && tmo--)
+		tmo = 6;
+		while ((RD(ctx, AC97_STATUS) & STAT_CP) && --tmo)
 			udelay(21);	/* wait an ac97 frame time */
 		if (!tmo) {
 			pr_debug("ac97rd timeout #1\n");
@@ -105,7 +105,7 @@ static unsigned short au1xac97c_ac97_read(struct snd_ac97 *ac97,
 		 * poll, Forrest, poll...
 		 */
 		tmo = 0x10000;
-		while ((RD(ctx, AC97_STATUS) & STAT_CP) && tmo--)
+		while ((RD(ctx, AC97_STATUS) & STAT_CP) && --tmo)
 			asm volatile ("nop");
 		data = RD(ctx, AC97_CMDRESP);
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 010/189] kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl

[Sasha Levin]

From: Paolo Bonzini <pbonzini@redhat.com>

[ Upstream commit 51776043afa415435c7e4636204fbe4f7edc4501 ]

This ioctl is obsolete (it was used by Xenner as far as I know) but
still let's not break it gratuitously...  Its handler is copying
directly into struct kvm.  Go through a bounce buffer instead, with
the added benefit that we can actually do something useful with the
flags argument---the previous code was exiting with -EINVAL but still
doing the copy.

This technically is a userspace ABI breakage, but since no one should be
using the ioctl, it's a good occasion to see if someone actually
complains.

Cc: kernel-hardening@lists.openwall.com
Cc: Kees Cook <keescook@chromium.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kvm/x86.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a10da5052072..41a8ac44d5cc 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4244,13 +4244,14 @@ set_identity_unlock:
 		mutex_unlock(&kvm->lock);
 		break;
 	case KVM_XEN_HVM_CONFIG: {
+		struct kvm_xen_hvm_config xhc;
 		r = -EFAULT;
-		if (copy_from_user(&kvm->arch.xen_hvm_config, argp,
-				   sizeof(struct kvm_xen_hvm_config)))
+		if (copy_from_user(&xhc, argp, sizeof(xhc)))
 			goto out;
 		r = -EINVAL;
-		if (kvm->arch.xen_hvm_config.flags)
+		if (xhc.flags)
 			goto out;
+		memcpy(&kvm->arch.xen_hvm_config, &xhc, sizeof(xhc));
 		r = 0;
 		break;
 	}
-- 
2.15.1

[PATCH AUTOSEL for 4.15 011/189] RDMA/core: Clarify rdma_ah_find_type

[Sasha Levin]

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit a6532e7139660c103dda181aa5b2c734aa26ed6c ]

iWARP does not use rdma_ah_attr_type, and for this reason we do not have a
RDMA_AH_ATTR_TYPE_IWARP. rdma_ah_find_type should not even be called on iwarp
ports and for clarity it shouldn't have a special test for iWarp.

This changes the result from RDMA_AH_ATTR_TYPE_ROCE to RDMA_AH_ATTR_TYPE_IB
when wrongly called on an iWarp port.

Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/rdma/ib_verbs.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 0d6a110dae7c..20ebf9061962 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -3793,8 +3793,7 @@ static inline void rdma_ah_set_grh(struct rdma_ah_attr *attr,
 static inline enum rdma_ah_attr_type rdma_ah_find_type(struct ib_device *dev,
 						       u32 port_num)
 {
-	if ((rdma_protocol_roce(dev, port_num)) ||
-	    (rdma_protocol_iwarp(dev, port_num)))
+	if (rdma_protocol_roce(dev, port_num))
 		return RDMA_AH_ATTR_TYPE_ROCE;
 	else if ((rdma_protocol_ib(dev, port_num)) &&
 		 (rdma_cap_opa_ah(dev, port_num)))
-- 
2.15.1

[PATCH AUTOSEL for 4.15 012/189] KVM: PPC: Book3S HV: Enable migration of decrementer register

[Sasha Levin]

From: Paul Mackerras <paulus@ozlabs.org>

[ Upstream commit 5855564c8ab2d9cefca7b2933bd19818eb795e40 ]

This adds a register identifier for use with the one_reg interface
to allow the decrementer expiry time to be read and written by
userspace.  The decrementer expiry time is in guest timebase units
and is equal to the sum of the decrementer and the guest timebase.
(The expiry time is used rather than the decrementer value itself
because the expiry time is not constantly changing, though the
decrementer value is, while the guest vcpu is not running.)

Without this, a guest vcpu migrated to a new host will see its
decrementer set to some random value.  On POWER8 and earlier, the
decrementer is 32 bits wide and counts down at 512MHz, so the
guest vcpu will potentially see no decrementer interrupts for up
to about 4 seconds, which will lead to a stall.  With POWER9, the
decrementer is now 56 bits side, so the stall can be much longer
(up to 2.23 years) and more noticeable.

To help work around the problem in cases where userspace has not been
updated to migrate the decrementer expiry time, we now set the
default decrementer expiry at vcpu creation time to the current time
rather than the maximum possible value.  This should mean an
immediate decrementer interrupt when a migrated vcpu starts
running.  In cases where the decrementer is 32 bits wide and more
than 4 seconds elapse between the creation of the vcpu and when it
first runs, the decrementer would have wrapped around to positive
values and there may still be a stall - but this is no worse than
the current situation.  In the large-decrementer case, we are sure
to get an immediate decrementer interrupt (assuming the time from
vcpu creation to first run is less than 2.23 years) and we thus
avoid a very long stall.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 Documentation/virtual/kvm/api.txt   | 1 +
 arch/powerpc/include/uapi/asm/kvm.h | 2 ++
 arch/powerpc/kvm/book3s_hv.c        | 8 ++++++++
 arch/powerpc/kvm/powerpc.c          | 2 +-
 4 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index fc3ae951bc07..d225ec217ebb 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1841,6 +1841,7 @@ registers, find a list below:
   PPC	| KVM_REG_PPC_DBSR              | 32
   PPC   | KVM_REG_PPC_TIDR              | 64
   PPC   | KVM_REG_PPC_PSSCR             | 64
+  PPC   | KVM_REG_PPC_DEC_EXPIRY        | 64
   PPC   | KVM_REG_PPC_TM_GPR0           | 64
           ...
   PPC   | KVM_REG_PPC_TM_GPR31          | 64
diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h
index 637b7263cb86..833ed9a16adf 100644
--- a/arch/powerpc/include/uapi/asm/kvm.h
+++ b/arch/powerpc/include/uapi/asm/kvm.h
@@ -632,6 +632,8 @@ struct kvm_ppc_cpu_char {
 #define KVM_REG_PPC_TIDR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbc)
 #define KVM_REG_PPC_PSSCR	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbd)
 
+#define KVM_REG_PPC_DEC_EXPIRY	(KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbe)
+
 /* Transactional Memory checkpointed state:
  * This is all GPRs, all VSX regs and a subset of SPRs
  */
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 6c402f6c4940..deffe36d8a2b 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1504,6 +1504,10 @@ static int kvmppc_get_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
 	case KVM_REG_PPC_ARCH_COMPAT:
 		*val = get_reg_val(id, vcpu->arch.vcore->arch_compat);
 		break;
+	case KVM_REG_PPC_DEC_EXPIRY:
+		*val = get_reg_val(id, vcpu->arch.dec_expires +
+				   vcpu->arch.vcore->tb_offset);
+		break;
 	default:
 		r = -EINVAL;
 		break;
@@ -1731,6 +1735,10 @@ static int kvmppc_set_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
 	case KVM_REG_PPC_ARCH_COMPAT:
 		r = kvmppc_set_arch_compat(vcpu, set_reg_val(id, *val));
 		break;
+	case KVM_REG_PPC_DEC_EXPIRY:
+		vcpu->arch.dec_expires = set_reg_val(id, *val) -
+			vcpu->arch.vcore->tb_offset;
+		break;
 	default:
 		r = -EINVAL;
 		break;
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 0a7c88786ec0..f3a7a2fc3d70 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -763,7 +763,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 
 	hrtimer_init(&vcpu->arch.dec_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
 	vcpu->arch.dec_timer.function = kvmppc_decrementer_wakeup;
-	vcpu->arch.dec_expires = ~(u64)0;
+	vcpu->arch.dec_expires = get_tb();
 
 #ifdef CONFIG_KVM_EXIT_TIMING
 	mutex_init(&vcpu->arch.exit_timing_lock);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 013/189] netfilter: ipv6: nf_defrag: Pass on packets to stack per RFC2460

[Sasha Levin]

From: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>

[ Upstream commit 83f1999caeb14e15df205e80d210699951733287 ]

ipv6_defrag pulls network headers before fragment header. In case of
an error, the netfilter layer is currently dropping these packets.
This results in failure of some IPv6 standards tests which passed on
older kernels due to the netfilter framework using cloning.

The test case run here is a check for ICMPv6 error message replies
when some invalid IPv6 fragments are sent. This specific test case is
listed in https://www.ipv6ready.org/docs/Core_Conformance_Latest.pdf
in the Extension Header Processing Order section.

A packet with unrecognized option Type 11 is sent and the test expects
an ICMP error in line with RFC2460 section 4.2 -

11 - discard the packet and, only if the packet's Destination
     Address was not a multicast address, send an ICMP Parameter
     Problem, Code 2, message to the packet's Source Address,
     pointing to the unrecognized Option Type.

Since netfilter layer now drops all invalid IPv6 frag packets, we no
longer see the ICMP error message and fail the test case.

To fix this, save the transport header. If defrag is unable to process
the packet due to RFC2460, restore the transport header and allow packet
to be processed by stack. There is no change for other packet
processing paths.

Tested by confirming that stack sends an ICMP error when it receives
these packets. Also tested that fragmented ICMP pings succeed.

v1->v2: Instead of cloning always, save the transport_header and
restore it in case of this specific error. Update the title and
commit message accordingly.

Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/ipv6/netfilter/nf_conntrack_reasm.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 977d8900cfd1..ce53dcfda88a 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -231,7 +231,7 @@ static int nf_ct_frag6_queue(struct frag_queue *fq, struct sk_buff *skb,
 
 	if ((unsigned int)end > IPV6_MAXPLEN) {
 		pr_debug("offset is too large.\n");
-		return -1;
+		return -EINVAL;
 	}
 
 	ecn = ip6_frag_ecn(ipv6_hdr(skb));
@@ -264,7 +264,7 @@ static int nf_ct_frag6_queue(struct frag_queue *fq, struct sk_buff *skb,
 			 * this case. -DaveM
 			 */
 			pr_debug("end of fragment not rounded to 8 bytes.\n");
-			return -1;
+			return -EPROTO;
 		}
 		if (end > fq->q.len) {
 			/* Some bits beyond end -> corruption. */
@@ -358,7 +358,7 @@ found:
 discard_fq:
 	inet_frag_kill(&fq->q, &nf_frags);
 err:
-	return -1;
+	return -EINVAL;
 }
 
 /*
@@ -567,6 +567,7 @@ find_prev_fhdr(struct sk_buff *skb, u8 *prevhdrp, int *prevhoff, int *fhoff)
 
 int nf_ct_frag6_gather(struct net *net, struct sk_buff *skb, u32 user)
 {
+	u16 savethdr = skb->transport_header;
 	struct net_device *dev = skb->dev;
 	int fhoff, nhoff, ret;
 	struct frag_hdr *fhdr;
@@ -600,8 +601,12 @@ int nf_ct_frag6_gather(struct net *net, struct sk_buff *skb, u32 user)
 
 	spin_lock_bh(&fq->q.lock);
 
-	if (nf_ct_frag6_queue(fq, skb, fhdr, nhoff) < 0) {
-		ret = -EINVAL;
+	ret = nf_ct_frag6_queue(fq, skb, fhdr, nhoff);
+	if (ret < 0) {
+		if (ret == -EPROTO) {
+			skb->transport_header = savethdr;
+			ret = 0;
+		}
 		goto out_unlock;
 	}
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 014/189] tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account

[Sasha Levin]

From: Anna-Maria Gleixner <anna-maria@linutronix.de>

[ Upstream commit 91633eed73a3ac37aaece5c8c1f93a18bae616a9 ]

So far only CLOCK_MONOTONIC and CLOCK_REALTIME were taken into account as
well as HRTIMER_MODE_ABS/REL in the hrtimer_init tracepoint. The query for
detecting the ABS or REL timer modes is not valid anymore, it got broken
by the introduction of HRTIMER_MODE_PINNED.

HRTIMER_MODE_PINNED is not evaluated in the hrtimer_init() call, but for the
sake of completeness print all given modes.

Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-9-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/trace/events/timer.h | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/include/trace/events/timer.h b/include/trace/events/timer.h
index 16e305e69f34..c6f728037c53 100644
--- a/include/trace/events/timer.h
+++ b/include/trace/events/timer.h
@@ -136,6 +136,20 @@ DEFINE_EVENT(timer_class, timer_cancel,
 	TP_ARGS(timer)
 );
 
+#define decode_clockid(type)						\
+	__print_symbolic(type,						\
+		{ CLOCK_REALTIME,	"CLOCK_REALTIME"	},	\
+		{ CLOCK_MONOTONIC,	"CLOCK_MONOTONIC"	},	\
+		{ CLOCK_BOOTTIME,	"CLOCK_BOOTTIME"	},	\
+		{ CLOCK_TAI,		"CLOCK_TAI"		})
+
+#define decode_hrtimer_mode(mode)					\
+	__print_symbolic(mode,						\
+		{ HRTIMER_MODE_ABS,		"ABS"		},	\
+		{ HRTIMER_MODE_REL,		"REL"		},	\
+		{ HRTIMER_MODE_ABS_PINNED,	"ABS|PINNED"	},	\
+		{ HRTIMER_MODE_REL_PINNED,	"REL|PINNED"	})
+
 /**
  * hrtimer_init - called when the hrtimer is initialized
  * @hrtimer:	pointer to struct hrtimer
@@ -162,10 +176,8 @@ TRACE_EVENT(hrtimer_init,
 	),
 
 	TP_printk("hrtimer=%p clockid=%s mode=%s", __entry->hrtimer,
-		  __entry->clockid == CLOCK_REALTIME ?
-			"CLOCK_REALTIME" : "CLOCK_MONOTONIC",
-		  __entry->mode == HRTIMER_MODE_ABS ?
-			"HRTIMER_MODE_ABS" : "HRTIMER_MODE_REL")
+		  decode_clockid(__entry->clockid),
+		  decode_hrtimer_mode(__entry->mode))
 );
 
 /**
-- 
2.15.1

[PATCH AUTOSEL for 4.15 015/189] KVM: s390: use created_vcpus in more places

[Sasha Levin]

From: Christian Borntraeger <borntraeger@de.ibm.com>

[ Upstream commit 241e3ec0faf5ab1a0d9b1f6c43eefa919fb9c112 ]

commit a03825bbd0c3 ("KVM: s390: use kvm->created_vcpus") introduced
kvm->created_vcpus to avoid races with the existing kvm->online_vcpus
scheme. One place was "forgotten" and one new place was "added".
Let's fix those.

Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Fixes: 4e0b1ab72b8a ("KVM: s390: gs support for kvm guests")
Fixes: a03825bbd0c3 ("KVM: s390: use kvm->created_vcpus")
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/s390/kvm/kvm-s390.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 004684eaa827..50193cbc819a 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -602,7 +602,7 @@ static int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap)
 	case KVM_CAP_S390_GS:
 		r = -EINVAL;
 		mutex_lock(&kvm->lock);
-		if (atomic_read(&kvm->online_vcpus)) {
+		if (kvm->created_vcpus) {
 			r = -EBUSY;
 		} else if (test_facility(133)) {
 			set_kvm_facility(kvm->arch.model.fac_mask, 133);
@@ -1122,7 +1122,7 @@ static int kvm_s390_set_processor_feat(struct kvm *kvm,
 		return -EINVAL;
 
 	mutex_lock(&kvm->lock);
-	if (!atomic_read(&kvm->online_vcpus)) {
+	if (!kvm->created_vcpus) {
 		bitmap_copy(kvm->arch.cpu_feat, (unsigned long *) data.feat,
 			    KVM_S390_VM_CPU_FEAT_NR_BITS);
 		ret = 0;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 016/189] platform/x86: dell-laptop: Filter out spurious keyboard backlight change events

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 4d6bde512a86c32df3a1f289d2b4cd04b17758d1 ]

On some Dell XPS models WMI events of type 0x0000 reporting a keycode of
0xe00c get reported when the brightness of the LCD panel changes.

This leads to us reporting false-positive kbd_led change events to
userspace which in turn leads to the kbd backlight OSD showing when it
should not.

We already read the current keyboard backlight brightness value when
reporting events because the led_classdev_notify_brightness_hw_changed
API requires this. Compare this value to the last known value and filter
out duplicate events, fixing this.

Note the fixed issue is esp. a problem on XPS models with an ambient light
sensor and automatic brightness adjustments turned on, this causes the kbd
backlight OSD to show all the time there.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514969
Fixes: 9c656b0799 ("platform/x86: dell-*: Call new led hw_changed API ...")
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/platform/x86/dell-laptop.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index c864430b9fcf..8ddb309cfc85 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -1149,6 +1149,7 @@ static u8 kbd_previous_mode_bit;
 
 static bool kbd_led_present;
 static DEFINE_MUTEX(kbd_led_mutex);
+static enum led_brightness kbd_led_level;
 
 /*
  * NOTE: there are three ways to set the keyboard backlight level.
@@ -1971,6 +1972,7 @@ static enum led_brightness kbd_led_level_get(struct led_classdev *led_cdev)
 static int kbd_led_level_set(struct led_classdev *led_cdev,
 			     enum led_brightness value)
 {
+	enum led_brightness new_value = value;
 	struct kbd_state state;
 	struct kbd_state new_state;
 	u16 num;
@@ -2000,6 +2002,9 @@ static int kbd_led_level_set(struct led_classdev *led_cdev,
 	}
 
 out:
+	if (ret == 0)
+		kbd_led_level = new_value;
+
 	mutex_unlock(&kbd_led_mutex);
 	return ret;
 }
@@ -2027,6 +2032,9 @@ static int __init kbd_led_init(struct device *dev)
 		if (kbd_led.max_brightness)
 			kbd_led.max_brightness--;
 	}
+
+	kbd_led_level = kbd_led_level_get(NULL);
+
 	ret = led_classdev_register(dev, &kbd_led);
 	if (ret)
 		kbd_led_present = false;
@@ -2051,13 +2059,25 @@ static void kbd_led_exit(void)
 static int dell_laptop_notifier_call(struct notifier_block *nb,
 				     unsigned long action, void *data)
 {
+	bool changed = false;
+	enum led_brightness new_kbd_led_level;
+
 	switch (action) {
 	case DELL_LAPTOP_KBD_BACKLIGHT_BRIGHTNESS_CHANGED:
 		if (!kbd_led_present)
 			break;
 
-		led_classdev_notify_brightness_hw_changed(&kbd_led,
-						kbd_led_level_get(&kbd_led));
+		mutex_lock(&kbd_led_mutex);
+		new_kbd_led_level = kbd_led_level_get(&kbd_led);
+		if (kbd_led_level != new_kbd_led_level) {
+			kbd_led_level = new_kbd_led_level;
+			changed = true;
+		}
+		mutex_unlock(&kbd_led_mutex);
+
+		if (changed)
+			led_classdev_notify_brightness_hw_changed(&kbd_led,
+								kbd_led_level);
 		break;
 	}
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 017/189] xprtrdma: Fix backchannel allocation of extra rpcrdma_reps

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit d698c4a02ee02053bbebe051322ff427a2dad56a ]

The backchannel code uses rpcrdma_recv_buffer_put to add new reps
to the free rep list. This also decrements rb_recv_count, which
spoofs the receive overrun logic in rpcrdma_buffer_get_rep.

Commit 9b06688bc3b9 ("xprtrdma: Fix additional uses of
spin_lock_irqsave(rb_lock)") replaced the original open-coded
list_add with a call to rpcrdma_recv_buffer_put(), but then a year
later, commit 05c974669ece ("xprtrdma: Fix receive buffer
accounting") added rep accounting to rpcrdma_recv_buffer_put.
It was an oversight to let the backchannel continue to use this
function.

The fix this, let's combine the "add to free list" logic with
rpcrdma_create_rep.

Also, do not allocate RPCRDMA_MAX_BC_REQUESTS rpcrdma_reps in
rpcrdma_buffer_create and then allocate additional rpcrdma_reps in
rpcrdma_bc_setup_reps. Allocating the extra reps during backchannel
set-up is sufficient.

Fixes: 05c974669ece ("xprtrdma: Fix receive buffer accounting")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/sunrpc/xprtrdma/backchannel.c | 12 ++----------
 net/sunrpc/xprtrdma/verbs.c       | 32 +++++++++++++++++++-------------
 net/sunrpc/xprtrdma/xprt_rdma.h   |  2 +-
 3 files changed, 22 insertions(+), 24 deletions(-)

diff --git a/net/sunrpc/xprtrdma/backchannel.c b/net/sunrpc/xprtrdma/backchannel.c
index 8b818bb3518a..256c67b433c1 100644
--- a/net/sunrpc/xprtrdma/backchannel.c
+++ b/net/sunrpc/xprtrdma/backchannel.c
@@ -74,21 +74,13 @@ out_fail:
 static int rpcrdma_bc_setup_reps(struct rpcrdma_xprt *r_xprt,
 				 unsigned int count)
 {
-	struct rpcrdma_rep *rep;
 	int rc = 0;
 
 	while (count--) {
-		rep = rpcrdma_create_rep(r_xprt);
-		if (IS_ERR(rep)) {
-			pr_err("RPC:       %s: reply buffer alloc failed\n",
-			       __func__);
-			rc = PTR_ERR(rep);
+		rc = rpcrdma_create_rep(r_xprt);
+		if (rc)
 			break;
-		}
-
-		rpcrdma_recv_buffer_put(rep);
 	}
-
 	return rc;
 }
 
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 8cd7ee4fa0cd..371fbd9b55bb 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -1093,10 +1093,17 @@ rpcrdma_create_req(struct rpcrdma_xprt *r_xprt)
 	return req;
 }
 
-struct rpcrdma_rep *
+/**
+ * rpcrdma_create_rep - Allocate an rpcrdma_rep object
+ * @r_xprt: controlling transport
+ *
+ * Returns 0 on success or a negative errno on failure.
+ */
+int
 rpcrdma_create_rep(struct rpcrdma_xprt *r_xprt)
 {
 	struct rpcrdma_create_data_internal *cdata = &r_xprt->rx_data;
+	struct rpcrdma_buffer *buf = &r_xprt->rx_buf;
 	struct rpcrdma_rep *rep;
 	int rc;
 
@@ -1121,12 +1128,18 @@ rpcrdma_create_rep(struct rpcrdma_xprt *r_xprt)
 	rep->rr_recv_wr.wr_cqe = &rep->rr_cqe;
 	rep->rr_recv_wr.sg_list = &rep->rr_rdmabuf->rg_iov;
 	rep->rr_recv_wr.num_sge = 1;
-	return rep;
+
+	spin_lock(&buf->rb_lock);
+	list_add(&rep->rr_list, &buf->rb_recv_bufs);
+	spin_unlock(&buf->rb_lock);
+	return 0;
 
 out_free:
 	kfree(rep);
 out:
-	return ERR_PTR(rc);
+	dprintk("RPC:       %s: reply buffer %d alloc failed\n",
+		__func__, rc);
+	return rc;
 }
 
 int
@@ -1167,17 +1180,10 @@ rpcrdma_buffer_create(struct rpcrdma_xprt *r_xprt)
 	}
 
 	INIT_LIST_HEAD(&buf->rb_recv_bufs);
-	for (i = 0; i < buf->rb_max_requests + RPCRDMA_MAX_BC_REQUESTS; i++) {
-		struct rpcrdma_rep *rep;
-
-		rep = rpcrdma_create_rep(r_xprt);
-		if (IS_ERR(rep)) {
-			dprintk("RPC:       %s: reply buffer %d alloc failed\n",
-				__func__, i);
-			rc = PTR_ERR(rep);
+	for (i = 0; i <= buf->rb_max_requests; i++) {
+		rc = rpcrdma_create_rep(r_xprt);
+		if (rc)
 			goto out;
-		}
-		list_add(&rep->rr_list, &buf->rb_recv_bufs);
 	}
 
 	rc = rpcrdma_sendctxs_create(r_xprt);
diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h
index 1342f743f1c4..3b63e61feae2 100644
--- a/net/sunrpc/xprtrdma/xprt_rdma.h
+++ b/net/sunrpc/xprtrdma/xprt_rdma.h
@@ -564,8 +564,8 @@ int rpcrdma_ep_post_recv(struct rpcrdma_ia *, struct rpcrdma_rep *);
  * Buffer calls - xprtrdma/verbs.c
  */
 struct rpcrdma_req *rpcrdma_create_req(struct rpcrdma_xprt *);
-struct rpcrdma_rep *rpcrdma_create_rep(struct rpcrdma_xprt *);
 void rpcrdma_destroy_req(struct rpcrdma_req *);
+int rpcrdma_create_rep(struct rpcrdma_xprt *r_xprt);
 int rpcrdma_buffer_create(struct rpcrdma_xprt *);
 void rpcrdma_buffer_destroy(struct rpcrdma_buffer *);
 struct rpcrdma_sendctx *rpcrdma_sendctx_get_locked(struct rpcrdma_buffer *buf);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 018/189] xprtrdma: Eliminate unnecessary lock cycle in xprt_rdma_send_request

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 42b9f5c58aa8c59c91ead0254f0c193e3438b020 ]

The rpcrdma_req is not shared yet, and its associated Send hasn't
been posted, thus RMW should be safe. There's no need for the
expense of a lock cycle here.

Fixes: 0ba6f37012db ("xprtrdma: Refactor rpcrdma_deferred_completion")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/sunrpc/xprtrdma/transport.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 6ee1ad8978f3..76c03aa6cb57 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -744,7 +744,7 @@ xprt_rdma_send_request(struct rpc_task *task)
 		goto drop_connection;
 	req->rl_connect_cookie = xprt->connect_cookie;
 
-	set_bit(RPCRDMA_REQ_F_PENDING, &req->rl_flags);
+	__set_bit(RPCRDMA_REQ_F_PENDING, &req->rl_flags);
 	if (rpcrdma_ep_post(&r_xprt->rx_ia, &r_xprt->rx_ep, req))
 		goto drop_connection;
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 019/189] printk: Add console owner and waiter logic to load balance console writes

[Sasha Levin]

From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>

[ Upstream commit dbdda842fe96f8932bae554f0adf463c27c42bc7 ]

This patch implements what I discussed in Kernel Summit. I added
lockdep annotation (hopefully correctly), and it hasn't had any splats
(since I fixed some bugs in the first iterations). It did catch
problems when I had the owner covering too much. But now that the owner
is only set when actively calling the consoles, lockdep has stayed
quiet.

Here's the design again:

I added a "console_owner" which is set to a task that is actively
writing to the consoles. It is *not* the same as the owner of the
console_lock. It is only set when doing the calls to the console
functions. It is protected by a console_owner_lock which is a raw spin
lock.

There is a console_waiter. This is set when there is an active console
owner that is not current, and waiter is not set. This too is protected
by console_owner_lock.

In printk() when it tries to write to the consoles, we have:

	if (console_trylock())
		console_unlock();

Now I added an else, which will check if there is an active owner, and
no current waiter. If that is the case, then console_waiter is set, and
the task goes into a spin until it is no longer set.

When the active console owner finishes writing the current message to
the consoles, it grabs the console_owner_lock and sees if there is a
waiter, and clears console_owner.

If there is a waiter, then it breaks out of the loop, clears the waiter
flag (because that will release the waiter from its spin), and exits.
Note, it does *not* release the console semaphore. Because it is a
semaphore, there is no owner. Another task may release it. This means
that the waiter is guaranteed to be the new console owner! Which it
becomes.

Then the waiter calls console_unlock() and continues to write to the
consoles.

If another task comes along and does a printk() it too can become the
new waiter, and we wash rinse and repeat!

By Petr Mladek about possible new deadlocks:

The thing is that we move console_sem only to printk() call
that normally calls console_unlock() as well. It means that
the transferred owner should not bring new type of dependencies.
As Steven said somewhere: "If there is a deadlock, it was
there even before."

We could look at it from this side. The possible deadlock would
look like:

CPU0                            CPU1

console_unlock()

  console_owner = current;

				spin_lockA()
				  printk()
				    spin = true;
				    while (...)

    call_console_drivers()
      spin_lockA()

This would be a deadlock. CPU0 would wait for the lock A.
While CPU1 would own the lockA and would wait for CPU0
to finish calling the console drivers and pass the console_sem
owner.

But if the above is true than the following scenario was
already possible before:

CPU0

spin_lockA()
  printk()
    console_unlock()
      call_console_drivers()
	spin_lockA()

By other words, this deadlock was there even before. Such
deadlocks are prevented by using printk_deferred() in
the sections guarded by the lock A.

By Steven Rostedt:

To demonstrate the issue, this module has been shown to lock up a
system with 4 CPUs and a slow console (like a serial console). It is
also able to lock up a 8 CPU system with only a fast (VGA) console, by
passing in "loops=100". The changes in this commit prevent this module
from locking up the system.

 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
 #include <linux/hrtimer.h>

 static bool stop_testing;
 static unsigned int loops = 1;

 static void preempt_printk_workfn(struct work_struct *work)
 {
 	int i;

 	while (!READ_ONCE(stop_testing)) {
 		for (i = 0; i < loops && !READ_ONCE(stop_testing); i++) {
 			preempt_disable();
 			pr_emerg("%5d%-75s\n", smp_processor_id(),
 				 " XXX NOPREEMPT");
 			preempt_enable();
 		}
 		msleep(1);
 	}
 }

 static struct work_struct __percpu *works;

 static void finish(void)
 {
 	int cpu;

 	WRITE_ONCE(stop_testing, true);
 	for_each_online_cpu(cpu)
 		flush_work(per_cpu_ptr(works, cpu));
 	free_percpu(works);
 }

 static int __init test_init(void)
 {
 	int cpu;

 	works = alloc_percpu(struct work_struct);
 	if (!works)
 		return -ENOMEM;

 	/*
 	 * This is just a test module. This will break if you
 	 * do any CPU hot plugging between loading and
 	 * unloading the module.
 	 */

 	for_each_online_cpu(cpu) {
 		struct work_struct *work = per_cpu_ptr(works, cpu);

 		INIT_WORK(work, &preempt_printk_workfn);
 		schedule_work_on(cpu, work);
 	}

 	return 0;
 }

 static void __exit test_exit(void)
 {
 	finish();
 }

 module_param(loops, uint, 0);
 module_init(test_init);
 module_exit(test_exit);
 MODULE_LICENSE("GPL");

Link: http://lkml.kernel.org/r/20180110132418.7080-2-pmladek@suse.com
Cc: akpm@linux-foundation.org
Cc: linux-mm@kvack.org
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[pmladek@suse.com: Commit message about possible deadlocks]
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/printk/printk.c | 108 ++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 107 insertions(+), 1 deletion(-)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index b9006617710f..7e6459abba43 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -86,8 +86,15 @@ EXPORT_SYMBOL_GPL(console_drivers);
 static struct lockdep_map console_lock_dep_map = {
 	.name = "console_lock"
 };
+static struct lockdep_map console_owner_dep_map = {
+	.name = "console_owner"
+};
 #endif
 
+static DEFINE_RAW_SPINLOCK(console_owner_lock);
+static struct task_struct *console_owner;
+static bool console_waiter;
+
 enum devkmsg_log_bits {
 	__DEVKMSG_LOG_BIT_ON = 0,
 	__DEVKMSG_LOG_BIT_OFF,
@@ -1753,8 +1760,56 @@ asmlinkage int vprintk_emit(int facility, int level,
 		 * semaphore.  The release will print out buffers and wake up
 		 * /dev/kmsg and syslog() users.
 		 */
-		if (console_trylock())
+		if (console_trylock()) {
 			console_unlock();
+		} else {
+			struct task_struct *owner = NULL;
+			bool waiter;
+			bool spin = false;
+
+			printk_safe_enter_irqsave(flags);
+
+			raw_spin_lock(&console_owner_lock);
+			owner = READ_ONCE(console_owner);
+			waiter = READ_ONCE(console_waiter);
+			if (!waiter && owner && owner != current) {
+				WRITE_ONCE(console_waiter, true);
+				spin = true;
+			}
+			raw_spin_unlock(&console_owner_lock);
+
+			/*
+			 * If there is an active printk() writing to the
+			 * consoles, instead of having it write our data too,
+			 * see if we can offload that load from the active
+			 * printer, and do some printing ourselves.
+			 * Go into a spin only if there isn't already a waiter
+			 * spinning, and there is an active printer, and
+			 * that active printer isn't us (recursive printk?).
+			 */
+			if (spin) {
+				/* We spin waiting for the owner to release us */
+				spin_acquire(&console_owner_dep_map, 0, 0, _THIS_IP_);
+				/* Owner will clear console_waiter on hand off */
+				while (READ_ONCE(console_waiter))
+					cpu_relax();
+
+				spin_release(&console_owner_dep_map, 1, _THIS_IP_);
+				printk_safe_exit_irqrestore(flags);
+
+				/*
+				 * The owner passed the console lock to us.
+				 * Since we did not spin on console lock, annotate
+				 * this as a trylock. Otherwise lockdep will
+				 * complain.
+				 */
+				mutex_acquire(&console_lock_dep_map, 0, 1, _THIS_IP_);
+				console_unlock();
+				printk_safe_enter_irqsave(flags);
+			}
+			printk_safe_exit_irqrestore(flags);
+
+		}
 	}
 
 	return printed_len;
@@ -2141,6 +2196,7 @@ void console_unlock(void)
 	static u64 seen_seq;
 	unsigned long flags;
 	bool wake_klogd = false;
+	bool waiter = false;
 	bool do_cond_resched, retry;
 
 	if (console_suspended) {
@@ -2229,14 +2285,64 @@ skip:
 		console_seq++;
 		raw_spin_unlock(&logbuf_lock);
 
+		/*
+		 * While actively printing out messages, if another printk()
+		 * were to occur on another CPU, it may wait for this one to
+		 * finish. This task can not be preempted if there is a
+		 * waiter waiting to take over.
+		 */
+		raw_spin_lock(&console_owner_lock);
+		console_owner = current;
+		raw_spin_unlock(&console_owner_lock);
+
+		/* The waiter may spin on us after setting console_owner */
+		spin_acquire(&console_owner_dep_map, 0, 0, _THIS_IP_);
+
 		stop_critical_timings();	/* don't trace print latency */
 		call_console_drivers(ext_text, ext_len, text, len);
 		start_critical_timings();
+
+		raw_spin_lock(&console_owner_lock);
+		waiter = READ_ONCE(console_waiter);
+		console_owner = NULL;
+		raw_spin_unlock(&console_owner_lock);
+
+		/*
+		 * If there is a waiter waiting for us, then pass the
+		 * rest of the work load over to that waiter.
+		 */
+		if (waiter)
+			break;
+
+		/* There was no waiter, and nothing will spin on us here */
+		spin_release(&console_owner_dep_map, 1, _THIS_IP_);
+
 		printk_safe_exit_irqrestore(flags);
 
 		if (do_cond_resched)
 			cond_resched();
 	}
+
+	/*
+	 * If there is an active waiter waiting on the console_lock.
+	 * Pass off the printing to the waiter, and the waiter
+	 * will continue printing on its CPU, and when all writing
+	 * has finished, the last printer will wake up klogd.
+	 */
+	if (waiter) {
+		WRITE_ONCE(console_waiter, false);
+		/* The waiter is now free to continue */
+		spin_release(&console_owner_dep_map, 1, _THIS_IP_);
+		/*
+		 * Hand off console_lock to waiter. The waiter will perform
+		 * the up(). After this, the waiter is the console_lock owner.
+		 */
+		mutex_release(&console_lock_dep_map, 1, _THIS_IP_);
+		printk_safe_exit_irqrestore(flags);
+		/* Note, if waiter is set, logbuf_lock is not held */
+		return;
+	}
+
 	console_locked = 0;
 
 	/* Release the exclusive_console once it is used */
-- 
2.15.1

[PATCH AUTOSEL for 4.15 020/189] selftest: ftrace: Fix to pick text symbols for kprobes

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 5e46664703b364434a2cbda3e6988fc24ae0ced5 ]

Fix to pick text symbols for multiple kprobe testcase.
kallsyms shows text symbols with " t " or " T " but
current testcase picks all symbols including "t",
so it picks data symbols if it includes 't' (e.g. "str").

This fixes it to find symbol lines with " t " or " T "
(including spaces).

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Russell King <linux@armlinux.org.uk>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc b/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
index bb16cf91f1b5..e297bd7a2e79 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
@@ -12,8 +12,8 @@ case `uname -m` in
   *) OFFS=0;;
 esac
 
-echo "Setup up to 256 kprobes"
-grep t /proc/kallsyms | cut -f3 -d" " | grep -v .*\\..* | \
+echo "Setup up kprobes on first 256 text symbols"
+grep -i " t " /proc/kallsyms | cut -f3 -d" " | grep -v .*\\..* | \
 head -n 256 | while read i; do echo p ${i}+${OFFS} ; done > kprobe_events ||:
 
 echo 1 > events/kprobes/enable
-- 
2.15.1

[PATCH AUTOSEL for 4.15 021/189] PCI: Add function 1 DMA alias quirk for Marvell 9128

[Sasha Levin]

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit aa008206634363ef800fbd5f0262016c9ff81dea ]

The Marvell 9128 is the original device generating bug 42679, from which
many other Marvell DMA alias quirks have been sourced, but we didn't have
positive confirmation of the fix on 9128 until now.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679
Link: https://www.spinics.net/lists/kvm/msg161459.html
Reported-by: Binarus <lists@binarus.de>
Tested-by: Binarus <lists@binarus.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pci/quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index a2f18c4a0346..9481c153d675 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3886,6 +3886,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9120,
 			 quirk_dma_func1_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123,
 			 quirk_dma_func1_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9128,
+			 quirk_dma_func1_alias);
 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130,
 			 quirk_dma_func1_alias);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 022/189] Input: psmouse - fix Synaptics detection when protocol is disabled

[Sasha Levin]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit 2bc4298f59d2f15175bb568e2d356b5912d0cdd9 ]

When Synaptics protocol is disabled, we still need to try and detect the
hardware, so we can switch to SMBus device if SMbus is detected, or we know
that it is Synaptics device and reset it properly for the bare PS/2
protocol.

Fixes: c378b5119eb0 ("Input: psmouse - factor out common protocol probing code")
Reported-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/input/mouse/psmouse-base.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 6a5649e52eed..8ac9e03c05b4 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -975,6 +975,21 @@ static void psmouse_apply_defaults(struct psmouse *psmouse)
 	psmouse->pt_deactivate = NULL;
 }
 
+static bool psmouse_do_detect(int (*detect)(struct psmouse *, bool),
+			      struct psmouse *psmouse, bool allow_passthrough,
+			      bool set_properties)
+{
+	if (psmouse->ps2dev.serio->id.type == SERIO_PS_PSTHRU &&
+	    !allow_passthrough) {
+		return false;
+	}
+
+	if (set_properties)
+		psmouse_apply_defaults(psmouse);
+
+	return detect(psmouse, set_properties) == 0;
+}
+
 static bool psmouse_try_protocol(struct psmouse *psmouse,
 				 enum psmouse_type type,
 				 unsigned int *max_proto,
@@ -986,15 +1001,8 @@ static bool psmouse_try_protocol(struct psmouse *psmouse,
 	if (!proto)
 		return false;
 
-	if (psmouse->ps2dev.serio->id.type == SERIO_PS_PSTHRU &&
-	    !proto->try_passthru) {
-		return false;
-	}
-
-	if (set_properties)
-		psmouse_apply_defaults(psmouse);
-
-	if (proto->detect(psmouse, set_properties) != 0)
+	if (!psmouse_do_detect(proto->detect, psmouse, proto->try_passthru,
+			       set_properties))
 		return false;
 
 	if (set_properties && proto->init && init_allowed) {
@@ -1027,8 +1035,8 @@ static int psmouse_extensions(struct psmouse *psmouse,
 	 * Always check for focaltech, this is safe as it uses pnp-id
 	 * matching.
 	 */
-	if (psmouse_try_protocol(psmouse, PSMOUSE_FOCALTECH,
-				 &max_proto, set_properties, false)) {
+	if (psmouse_do_detect(focaltech_detect,
+			      psmouse, false, set_properties)) {
 		if (max_proto > PSMOUSE_IMEX &&
 		    IS_ENABLED(CONFIG_MOUSE_PS2_FOCALTECH) &&
 		    (!set_properties || focaltech_init(psmouse) == 0)) {
@@ -1074,8 +1082,8 @@ static int psmouse_extensions(struct psmouse *psmouse,
 	 * probing for IntelliMouse.
 	 */
 	if (max_proto > PSMOUSE_PS2 &&
-	    psmouse_try_protocol(psmouse, PSMOUSE_SYNAPTICS, &max_proto,
-				 set_properties, false)) {
+	    psmouse_do_detect(synaptics_detect,
+			      psmouse, false, set_properties)) {
 		synaptics_hardware = true;
 
 		if (max_proto > PSMOUSE_IMEX) {
-- 
2.15.1

[PATCH AUTOSEL for 4.15 023/189] libbpf: Makefile set specified permission mode

[Sasha Levin]

From: Jesper Dangaard Brouer <brouer@redhat.com>

[ Upstream commit 7110d80d53f472956420cd05a6297f49b558b674 ]

The third parameter to do_install was not used by $(INSTALL) command.
Fix this by only setting the -m option when the third parameter is supplied.

The use of a third parameter was introduced in commit  eb54e522a000 ("bpf:
install libbpf headers on 'make install'").

Without this change, the header files are install as executables files (755).

Fixes: eb54e522a000 ("bpf: install libbpf headers on 'make install'")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/lib/bpf/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/lib/bpf/Makefile b/tools/lib/bpf/Makefile
index 4555304dc18e..f02448e86d38 100644
--- a/tools/lib/bpf/Makefile
+++ b/tools/lib/bpf/Makefile
@@ -183,7 +183,7 @@ define do_install
 	if [ ! -d '$(DESTDIR_SQ)$2' ]; then		\
 		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$2';	\
 	fi;						\
-	$(INSTALL) $1 '$(DESTDIR_SQ)$2'
+	$(INSTALL) $1 $(if $3,-m $3,) '$(DESTDIR_SQ)$2'
 endef
 
 install_lib: all_cmd
-- 
2.15.1

[PATCH AUTOSEL for 4.15 024/189] Input: synaptics - reset the ABS_X/Y fuzz after initializing MT axes

[Sasha Levin]

From: Peter Hutterer <peter.hutterer@who-t.net>

[ Upstream commit 19eb4ed1141bd1096b9bc84ba9c4d03d5830c143 ]

input_mt_init_slots() resets the ABS_X/Y fuzz to 0 and expects the driver
to call input_mt_report_pointer_emulation(). That is based on the MT
position bits which are already defuzzed - hence a fuzz of 0.

In the case of synaptics semi-mt devices, we report the ABS_X/Y axes
manually.  This results in the MT position being defuzzed but the
single-touch emulation missing that defuzzing.

Work around this by re-initializing the ABS_X/Y axes after the MT axis to
get the same fuzz value back.

https://bugs.freedesktop.org/show_bug.cgi?id=104533

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/input/mouse/synaptics.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index ee5466a374bf..a246fc686bb7 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -1280,6 +1280,16 @@ static void set_input_params(struct psmouse *psmouse,
 				    INPUT_MT_POINTER |
 				    (cr48_profile_sensor ?
 					INPUT_MT_TRACK : INPUT_MT_SEMI_MT));
+
+		/*
+		 * For semi-mt devices we send ABS_X/Y ourselves instead of
+		 * input_mt_report_pointer_emulation. But
+		 * input_mt_init_slots() resets the fuzz to 0, leading to a
+		 * filtered ABS_MT_POSITION_X but an unfiltered ABS_X
+		 * position. Let's re-initialize ABS_X/Y here.
+		 */
+		if (!cr48_profile_sensor)
+			set_abs_position_params(dev, &priv->info, ABS_X, ABS_Y);
 	}
 
 	if (SYN_CAP_PALMDETECT(info->capabilities))
-- 
2.15.1

[PATCH AUTOSEL for 4.15 025/189] i40iw: Free IEQ resources

[Sasha Levin]

From: Mustafa Ismail <mustafa.ismail@intel.com>

[ Upstream commit f20d429511affab6a2a9129f46042f43e6ffe396 ]

The iWARP Exception Queue (IEQ) resources are not freed when a QP is
destroyed. Fix this by freeing IEQ resources when freeing QP resources.

Fixes: d37498417947 ("i40iw: add files for iwarp interface")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/i40iw/i40iw_puda.c  | 3 +--
 drivers/infiniband/hw/i40iw/i40iw_puda.h  | 1 +
 drivers/infiniband/hw/i40iw/i40iw_verbs.c | 1 +
 3 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/i40iw/i40iw_puda.c b/drivers/infiniband/hw/i40iw/i40iw_puda.c
index 796a815b53fd..266c5952ba92 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_puda.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_puda.c
@@ -48,7 +48,6 @@ static void i40iw_ieq_tx_compl(struct i40iw_sc_vsi *vsi, void *sqwrid);
 static void i40iw_ilq_putback_rcvbuf(struct i40iw_sc_qp *qp, u32 wqe_idx);
 static enum i40iw_status_code i40iw_puda_replenish_rq(struct i40iw_puda_rsrc
 						      *rsrc, bool initial);
-static void i40iw_ieq_cleanup_qp(struct i40iw_puda_rsrc *ieq, struct i40iw_sc_qp *qp);
 /**
  * i40iw_puda_get_listbuf - get buffer from puda list
  * @list: list to use for buffers (ILQ or IEQ)
@@ -1483,7 +1482,7 @@ static void i40iw_ieq_tx_compl(struct i40iw_sc_vsi *vsi, void *sqwrid)
  * @ieq: ieq resource
  * @qp: all pending fpdu buffers
  */
-static void i40iw_ieq_cleanup_qp(struct i40iw_puda_rsrc *ieq, struct i40iw_sc_qp *qp)
+void i40iw_ieq_cleanup_qp(struct i40iw_puda_rsrc *ieq, struct i40iw_sc_qp *qp)
 {
 	struct i40iw_puda_buf *buf;
 	struct i40iw_pfpdu *pfpdu = &qp->pfpdu;
diff --git a/drivers/infiniband/hw/i40iw/i40iw_puda.h b/drivers/infiniband/hw/i40iw/i40iw_puda.h
index 660aa3edae56..53a7d58c84b5 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_puda.h
+++ b/drivers/infiniband/hw/i40iw/i40iw_puda.h
@@ -184,4 +184,5 @@ enum i40iw_status_code i40iw_cqp_qp_create_cmd(struct i40iw_sc_dev *dev, struct
 enum i40iw_status_code i40iw_cqp_cq_create_cmd(struct i40iw_sc_dev *dev, struct i40iw_sc_cq *cq);
 void i40iw_cqp_qp_destroy_cmd(struct i40iw_sc_dev *dev, struct i40iw_sc_qp *qp);
 void i40iw_cqp_cq_destroy_cmd(struct i40iw_sc_dev *dev, struct i40iw_sc_cq *cq);
+void i40iw_ieq_cleanup_qp(struct i40iw_puda_rsrc *ieq, struct i40iw_sc_qp *qp);
 #endif
diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c
index 3c6f3ce88f89..6aa613835405 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c
@@ -412,6 +412,7 @@ void i40iw_free_qp_resources(struct i40iw_device *iwdev,
 {
 	struct i40iw_pbl *iwpbl = &iwqp->iwpbl;
 
+	i40iw_ieq_cleanup_qp(iwdev->vsi.ieq, &iwqp->sc_qp);
 	i40iw_dealloc_push_page(iwdev, &iwqp->sc_qp);
 	if (qp_num)
 		i40iw_free_resource(iwdev, iwdev->allocated_qps, qp_num);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 026/189] i40iw: Zero-out consumer key on allocate stag for FMR

[Sasha Levin]

From: Shiraz Saleem <shiraz.saleem@intel.com>

[ Upstream commit 6376e926af1a8661dd1b2e6d0896e07f84a35844 ]

If the application invalidates the MR before the FMR WR, HW parses the
consumer key portion of the stag and returns an invalid stag key
Asynchronous Event (AE) that tears down the QP.

Fix this by zeroing-out the consumer key portion of the allocated stag
returned to application for FMR.

Fixes: ee855d3b93f3 ("RDMA/i40iw: Add base memory management extensions")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/i40iw/i40iw_verbs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c
index 6aa613835405..896c4f82e5ef 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c
@@ -1638,6 +1638,7 @@ static struct ib_mr *i40iw_alloc_mr(struct ib_pd *pd,
 		err_code = -EOVERFLOW;
 		goto err;
 	}
+	stag &= ~I40IW_CQPSQ_STAG_KEY_MASK;
 	iwmr->stag = stag;
 	iwmr->ibmr.rkey = stag;
 	iwmr->ibmr.lkey = stag;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 027/189] scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout()

[Sasha Levin]

From: "himanshu.madhani@cavium.com" <himanshu.madhani@cavium.com>

[ Upstream commit 7ac0c332f96bb9688560726f5e80c097ed8de59a ]

This patch fixes following Smatch warning:

drivers/scsi/qla2xxx/qla_init.c:130 qla2x00_async_iocb_timeout() error: we previously assumed 'fcport' could be null (see line 107)

Fixes: 5c25d451163c ("scsi: qla2xxx: Fix NULL pointer access for fcport structure")
Reported by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/qla2xxx/qla_init.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 7b44a2c68a45..e05438d1da20 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -115,6 +115,8 @@ qla2x00_async_iocb_timeout(void *data)
 
 	switch (sp->type) {
 	case SRB_LOGIN_CMD:
+		if (!fcport)
+			break;
 		/* Retry as needed. */
 		lio->u.logio.data[0] = MBS_COMMAND_ERROR;
 		lio->u.logio.data[1] = lio->u.logio.flags & SRB_LOGIN_RETRIED ?
@@ -128,6 +130,8 @@ qla2x00_async_iocb_timeout(void *data)
 		qla24xx_handle_plogi_done_event(fcport->vha, &ea);
 		break;
 	case SRB_LOGOUT_CMD:
+		if (!fcport)
+			break;
 		qlt_logo_completion_handler(fcport, QLA_FUNCTION_TIMEOUT);
 		break;
 	case SRB_CT_PTHRU_CMD:
-- 
2.15.1

[PATCH AUTOSEL for 4.15 028/189] perf unwind: Do not look just at the global callchain_param.record_mode

[Sasha Levin]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit eabad8c6856f185f876b54c426c2cc69fe0f0a7d ]

When setting up DWARF callchains on specific events, without using
'record' or 'trace' --call-graph, but instead doing it like:

	perf trace -e cycles/call-graph=dwarf/

The unwind__prepare_access() call in thread__insert_map() when we
process PERF_RECORD_MMAP(2) metadata events were not being performed,
precluding us from using per-event DWARF callchains, handling them just
when we asked for all events to be DWARF, using "--call-graph dwarf".

We do it in the PERF_RECORD_MMAP because we have to look at one of the
executable maps to figure out the executable type (64-bit, 32-bit) of
the DSO laid out in that mmap. Also to look at the architecture where
the perf.data file was recorded.

All this probably should be deferred to when we process a sample for
some thread that has callchains, so that we do this processing only for
the threads with samples, not for all of them.

For now, fix using DWARF on specific events.

Before:

  # perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
  PING ::1(::1) 56 data bytes
  64 bytes from ::1: icmp_seq=1 ttl=64 time=0.048 ms

  --- ::1 ping statistics ---
  1 packets transmitted, 1 received, 0% packet loss, time 0ms
  rtt min/avg/max/mdev = 0.048/0.048/0.048/0.000 ms
     0.000 probe_libc:inet_pton:(7fe9597bb350))
  Problem processing probe_libc:inet_pton callchain, skipping...
  #

After:

  # perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
  PING ::1(::1) 56 data bytes
  64 bytes from ::1: icmp_seq=1 ttl=64 time=0.060 ms

  --- ::1 ping statistics ---
  1 packets transmitted, 1 received, 0% packet loss, time 0ms
  rtt min/avg/max/mdev = 0.060/0.060/0.060/0.000 ms
       0.000 probe_libc:inet_pton:(7fd4aa930350))
                                         __inet_pton (inlined)
                                         gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
                                         __GI_getaddrinfo (inlined)
                                         [0xffffaa804e51af3f] (/usr/bin/ping)
                                         __libc_start_main (/usr/lib64/libc-2.26.so)
                                         [0xffffaa804e51b379] (/usr/bin/ping)
  #
  # perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
  PING ::1(::1) 56 data bytes
  64 bytes from ::1: icmp_seq=1 ttl=64 time=0.057 ms

  --- ::1 ping statistics ---
  1 packets transmitted, 1 received, 0% packet loss, time 0ms
  rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms
       0.000 probe_libc:inet_pton:(7f9363b9e350))
                                         __inet_pton (inlined)
                                         gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
                                         __GI_getaddrinfo (inlined)
                                         [0xffffa9e8a14e0f3f] (/usr/bin/ping)
                                         __libc_start_main (/usr/lib64/libc-2.26.so)
                                         [0xffffa9e8a14e1379] (/usr/bin/ping)
  #
  # perf trace --call-graph=fp --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
  PING ::1(::1) 56 data bytes
  64 bytes from ::1: icmp_seq=1 ttl=64 time=0.077 ms

  --- ::1 ping statistics ---
  1 packets transmitted, 1 received, 0% packet loss, time 0ms
  rtt min/avg/max/mdev = 0.077/0.077/0.077/0.000 ms
       0.000 probe_libc:inet_pton:(7f4947e1c350))
                                         __inet_pton (inlined)
                                         gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
                                         __GI_getaddrinfo (inlined)
                                         [0xffffaa716d88ef3f] (/usr/bin/ping)
                                         __libc_start_main (/usr/lib64/libc-2.26.so)
                                         [0xffffaa716d88f379] (/usr/bin/ping)
  #
  # perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=fp/ ping -6 -c 1 ::1
  PING ::1(::1) 56 data bytes
  64 bytes from ::1: icmp_seq=1 ttl=64 time=0.078 ms

  --- ::1 ping statistics ---
  1 packets transmitted, 1 received, 0% packet loss, time 0ms
  rtt min/avg/max/mdev = 0.078/0.078/0.078/0.000 ms
       0.000 probe_libc:inet_pton:(7fa157696350))
                                         __GI___inet_pton (/usr/lib64/libc-2.26.so)
                                         getaddrinfo (/usr/lib64/libc-2.26.so)
                                         [0xffffa9ba39c74f40] (/usr/bin/ping)
  #

Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/20180116182650.GE16107@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/builtin-c2c.c                 |  5 +++--
 tools/perf/builtin-report.c              |  5 +++--
 tools/perf/builtin-script.c              |  5 +++--
 tools/perf/tests/dwarf-unwind.c          |  1 +
 tools/perf/util/callchain.c              | 10 ++++++++++
 tools/perf/util/callchain.h              |  2 ++
 tools/perf/util/unwind-libunwind-local.c |  9 +++------
 7 files changed, 25 insertions(+), 12 deletions(-)

diff --git a/tools/perf/builtin-c2c.c b/tools/perf/builtin-c2c.c
index 17855c4626a0..c8a5faaca47f 100644
--- a/tools/perf/builtin-c2c.c
+++ b/tools/perf/builtin-c2c.c
@@ -2393,9 +2393,10 @@ static int setup_callchain(struct perf_evlist *evlist)
 	enum perf_call_graph_mode mode = CALLCHAIN_NONE;
 
 	if ((sample_type & PERF_SAMPLE_REGS_USER) &&
-	    (sample_type & PERF_SAMPLE_STACK_USER))
+	    (sample_type & PERF_SAMPLE_STACK_USER)) {
 		mode = CALLCHAIN_DWARF;
-	else if (sample_type & PERF_SAMPLE_BRANCH_STACK)
+		dwarf_callchain_users = true;
+	} else if (sample_type & PERF_SAMPLE_BRANCH_STACK)
 		mode = CALLCHAIN_LBR;
 	else if (sample_type & PERF_SAMPLE_CALLCHAIN)
 		mode = CALLCHAIN_FP;
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index af5dd038195e..ca2ed616236e 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -312,9 +312,10 @@ static int report__setup_sample_type(struct report *rep)
 
 	if (symbol_conf.use_callchain || symbol_conf.cumulate_callchain) {
 		if ((sample_type & PERF_SAMPLE_REGS_USER) &&
-		    (sample_type & PERF_SAMPLE_STACK_USER))
+		    (sample_type & PERF_SAMPLE_STACK_USER)) {
 			callchain_param.record_mode = CALLCHAIN_DWARF;
-		else if (sample_type & PERF_SAMPLE_BRANCH_STACK)
+			dwarf_callchain_users = true;
+		} else if (sample_type & PERF_SAMPLE_BRANCH_STACK)
 			callchain_param.record_mode = CALLCHAIN_LBR;
 		else
 			callchain_param.record_mode = CALLCHAIN_FP;
diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index 9b43bda45a41..fc3974b1d8fd 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -2758,9 +2758,10 @@ static void script__setup_sample_type(struct perf_script *script)
 
 	if (symbol_conf.use_callchain || symbol_conf.cumulate_callchain) {
 		if ((sample_type & PERF_SAMPLE_REGS_USER) &&
-		    (sample_type & PERF_SAMPLE_STACK_USER))
+		    (sample_type & PERF_SAMPLE_STACK_USER)) {
 			callchain_param.record_mode = CALLCHAIN_DWARF;
-		else if (sample_type & PERF_SAMPLE_BRANCH_STACK)
+			dwarf_callchain_users = true;
+		} else if (sample_type & PERF_SAMPLE_BRANCH_STACK)
 			callchain_param.record_mode = CALLCHAIN_LBR;
 		else
 			callchain_param.record_mode = CALLCHAIN_FP;
diff --git a/tools/perf/tests/dwarf-unwind.c b/tools/perf/tests/dwarf-unwind.c
index ac40e05bcab4..260418969120 100644
--- a/tools/perf/tests/dwarf-unwind.c
+++ b/tools/perf/tests/dwarf-unwind.c
@@ -173,6 +173,7 @@ int test__dwarf_unwind(struct test *test __maybe_unused, int subtest __maybe_unu
 	}
 
 	callchain_param.record_mode = CALLCHAIN_DWARF;
+	dwarf_callchain_users = true;
 
 	if (init_live_machine(machine)) {
 		pr_err("Could not init machine\n");
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index 082505d08d72..32ef7bdca1cf 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -37,6 +37,15 @@ struct callchain_param callchain_param = {
 	CALLCHAIN_PARAM_DEFAULT
 };
 
+/*
+ * Are there any events usind DWARF callchains?
+ *
+ * I.e.
+ *
+ * -e cycles/call-graph=dwarf/
+ */
+bool dwarf_callchain_users;
+
 struct callchain_param callchain_param_default = {
 	CALLCHAIN_PARAM_DEFAULT
 };
@@ -265,6 +274,7 @@ int parse_callchain_record(const char *arg, struct callchain_param *param)
 			ret = 0;
 			param->record_mode = CALLCHAIN_DWARF;
 			param->dump_size = default_stack_dump_size;
+			dwarf_callchain_users = true;
 
 			tok = strtok_r(NULL, ",", &saveptr);
 			if (tok) {
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index b79ef2478a57..154560b1eb65 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -89,6 +89,8 @@ enum chain_value {
 	CCVAL_COUNT,
 };
 
+extern bool dwarf_callchain_users;
+
 struct callchain_param {
 	bool			enabled;
 	enum perf_call_graph_mode record_mode;
diff --git a/tools/perf/util/unwind-libunwind-local.c b/tools/perf/util/unwind-libunwind-local.c
index 7a42f703e858..af873044d33a 100644
--- a/tools/perf/util/unwind-libunwind-local.c
+++ b/tools/perf/util/unwind-libunwind-local.c
@@ -631,9 +631,8 @@ static unw_accessors_t accessors = {
 
 static int _unwind__prepare_access(struct thread *thread)
 {
-	if (callchain_param.record_mode != CALLCHAIN_DWARF)
+	if (!dwarf_callchain_users)
 		return 0;
-
 	thread->addr_space = unw_create_addr_space(&accessors, 0);
 	if (!thread->addr_space) {
 		pr_err("unwind: Can't create unwind address space.\n");
@@ -646,17 +645,15 @@ static int _unwind__prepare_access(struct thread *thread)
 
 static void _unwind__flush_access(struct thread *thread)
 {
-	if (callchain_param.record_mode != CALLCHAIN_DWARF)
+	if (!dwarf_callchain_users)
 		return;
-
 	unw_flush_cache(thread->addr_space, 0, 0);
 }
 
 static void _unwind__finish_access(struct thread *thread)
 {
-	if (callchain_param.record_mode != CALLCHAIN_DWARF)
+	if (!dwarf_callchain_users)
 		return;
-
 	unw_destroy_addr_space(thread->addr_space);
 }
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 029/189] tools lib traceevent: Simplify pointer print logic and fix %pF

[Sasha Levin]

From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>

[ Upstream commit 38d70b7ca1769f26c0b79f3c08ff2cc949712b59 ]

When processing %pX in pretty_print(), simplify the logic slightly by
incrementing the ptr to the format string if isalnum(ptr[1]) is true.
This follows the logic a bit more closely to what is in the kernel.

Also, this fixes a small bug where %pF was not giving the offset of the
function.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004822.260262257@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/lib/traceevent/event-parse.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index 7ce724fc0544..9a17bc27296e 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -4949,21 +4949,22 @@ static void pretty_print(struct trace_seq *s, void *data, int size, struct event
 				else
 					ls = 2;
 
-				if (*(ptr+1) == 'F' || *(ptr+1) == 'f' ||
-				    *(ptr+1) == 'S' || *(ptr+1) == 's') {
+				if (isalnum(ptr[1]))
 					ptr++;
+
+				if (*ptr == 'F' || *ptr == 'f' ||
+				    *ptr == 'S' || *ptr == 's') {
 					show_func = *ptr;
-				} else if (*(ptr+1) == 'M' || *(ptr+1) == 'm') {
-					print_mac_arg(s, *(ptr+1), data, size, event, arg);
-					ptr++;
+				} else if (*ptr == 'M' || *ptr == 'm') {
+					print_mac_arg(s, *ptr, data, size, event, arg);
 					arg = arg->next;
 					break;
-				} else if (*(ptr+1) == 'I' || *(ptr+1) == 'i') {
+				} else if (*ptr == 'I' || *ptr == 'i') {
 					int n;
 
-					n = print_ip_arg(s, ptr+1, data, size, event, arg);
+					n = print_ip_arg(s, ptr, data, size, event, arg);
 					if (n > 0) {
-						ptr += n;
+						ptr += n - 1;
 						arg = arg->next;
 						break;
 					}
-- 
2.15.1

[PATCH AUTOSEL for 4.15 030/189] perf callchain: Fix attr.sample_max_stack setting

[Sasha Levin]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 249d98e567e25dd03e015e2d31e1b7b9648f34df ]

When setting the "dwarf" unwinder for a specific event and not
specifying the max-stack, the attr.sample_max_stack ended up using an
uninitialized callchain_param.max_stack, fix it by using designated
initializers for that callchain_param variable, zeroing all non
explicitely initialized struct members.

Here is what happened:

  # perf trace -vv --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
  callchain: type DWARF
  callchain: stack dump size 8192
  perf_event_attr:
    type                             2
    size                             112
    config                           0x730
    { sample_period, sample_freq }   1
    sample_type                      IP|TID|TIME|ADDR|CALLCHAIN|CPU|PERIOD|RAW|REGS_USER|STACK_USER|DATA_SRC
    exclude_callchain_user           1
    { wakeup_events, wakeup_watermark } 1
    sample_regs_user                 0xff0fff
    sample_stack_user                8192
    sample_max_stack                 50656
  sys_perf_event_open failed, error -75
  Value too large for defined data type
  # perf trace -vv --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
  callchain: type DWARF
  callchain: stack dump size 8192
  perf_event_attr:
    type                             2
    size                             112
    config                           0x730
    sample_type                      IP|TID|TIME|ADDR|CALLCHAIN|CPU|PERIOD|RAW|REGS_USER|STACK_USER|DATA_SRC
    exclude_callchain_user           1
    sample_regs_user                 0xff0fff
    sample_stack_user                8192
    sample_max_stack                 30448
  sys_perf_event_open failed, error -75
  Value too large for defined data type
  #

Now the attr.sample_max_stack is set to zero and the above works as
expected:

  # perf trace --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
  PING ::1(::1) 56 data bytes
  64 bytes from ::1: icmp_seq=1 ttl=64 time=0.072 ms

  --- ::1 ping statistics ---
  1 packets transmitted, 1 received, 0% packet loss, time 0ms
  rtt min/avg/max/mdev = 0.072/0.072/0.072/0.000 ms
       0.000 probe_libc:inet_pton:(7feb7a998350))
                                         __inet_pton (inlined)
                                         gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
                                         __GI_getaddrinfo (inlined)
                                         [0xffffaa39b6108f3f] (/usr/bin/ping)
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-is9tramondqa9jlxxsgcm9iz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/util/evsel.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index d5fbcf8c7aa7..784d852c91cc 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -722,14 +722,14 @@ static void apply_config_terms(struct perf_evsel *evsel,
 	struct perf_evsel_config_term *term;
 	struct list_head *config_terms = &evsel->config_terms;
 	struct perf_event_attr *attr = &evsel->attr;
-	struct callchain_param param;
+	/* callgraph default */
+	struct callchain_param param = {
+		.record_mode = callchain_param.record_mode,
+	};
 	u32 dump_size = 0;
 	int max_stack = 0;
 	const char *callgraph_buf = NULL;
 
-	/* callgraph default */
-	param.record_mode = callchain_param.record_mode;
-
 	list_for_each_entry(term, config_terms, list) {
 		switch (term->type) {
 		case PERF_EVSEL__CONFIG_TERM_PERIOD:
-- 
2.15.1

[PATCH AUTOSEL for 4.15 031/189] tools lib traceevent: Fix get_field_str() for dynamic strings

[Sasha Levin]

From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>

[ Upstream commit d777f8de99b05d399c0e4e51cdce016f26bd971b ]

If a field is a dynamic string, get_field_str() returned just the
offset/size value and not the string. Have it parse the offset/size
correctly to return the actual string. Otherwise filtering fails when
trying to filter fields that are dynamic strings.

Reported-by: Gopanapalli Pradeep <prap_hai@yahoo.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004823.146333275@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/lib/traceevent/parse-filter.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/tools/lib/traceevent/parse-filter.c b/tools/lib/traceevent/parse-filter.c
index 315df0a70265..7b664fd1ebe8 100644
--- a/tools/lib/traceevent/parse-filter.c
+++ b/tools/lib/traceevent/parse-filter.c
@@ -1879,17 +1879,25 @@ static const char *get_field_str(struct filter_arg *arg, struct pevent_record *r
 	struct pevent *pevent;
 	unsigned long long addr;
 	const char *val = NULL;
+	unsigned int size;
 	char hex[64];
 
 	/* If the field is not a string convert it */
 	if (arg->str.field->flags & FIELD_IS_STRING) {
 		val = record->data + arg->str.field->offset;
+		size = arg->str.field->size;
+
+		if (arg->str.field->flags & FIELD_IS_DYNAMIC) {
+			addr = *(unsigned int *)val;
+			val = record->data + (addr & 0xffff);
+			size = addr >> 16;
+		}
 
 		/*
 		 * We need to copy the data since we can't be sure the field
 		 * is null terminated.
 		 */
-		if (*(val + arg->str.field->size - 1)) {
+		if (*(val + size - 1)) {
 			/* copy it */
 			memcpy(arg->str.buffer, val, arg->str.field->size);
 			/* the buffer is already NULL terminated */
-- 
2.15.1

[PATCH AUTOSEL for 4.15 032/189] perf record: Fix failed memory allocation for get_cpuid_str

[Sasha Levin]

From: Thomas Richter <tmricht@linux.vnet.ibm.com>

[ Upstream commit 81fccd6ca507d3b2012eaf1edeb9b1dbf4bd22db ]

In x86 architecture dependend part function get_cpuid_str() mallocs a
128 byte buffer, but does not check if the memory allocation succeeded
or not.

When the memory allocation fails, function __get_cpuid() is called with
first parameter being a NULL pointer.  However this function references
its first parameter and operates on a NULL pointer which might cause
core dumps.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180117131611.34319-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/arch/x86/util/header.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/arch/x86/util/header.c b/tools/perf/arch/x86/util/header.c
index 33027c5e6f92..c6b5204e0280 100644
--- a/tools/perf/arch/x86/util/header.c
+++ b/tools/perf/arch/x86/util/header.c
@@ -70,7 +70,7 @@ get_cpuid_str(void)
 {
 	char *buf = malloc(128);
 
-	if (__get_cpuid(buf, 128, "%s-%u-%X$") < 0) {
+	if (buf && __get_cpuid(buf, 128, "%s-%u-%X$") < 0) {
 		free(buf);
 		return NULL;
 	}
-- 
2.15.1

[PATCH AUTOSEL for 4.15 033/189] iommu/exynos: Don't unconditionally steal bus ops

[Sasha Levin]

From: Robin Murphy <robin.murphy@arm.com>

[ Upstream commit dc98b8480d8a68c2ce9aa28b9f0d714fd258bc0b ]

Removing the early device registration hook overlooked the fact that
it only ran conditionally on a compatible device being present in the
DT. With exynos_iommu_init() now running as an unconditional initcall,
problems arise on non-Exynos systems when other IOMMU drivers find
themselves unable to install their ops on the platform bus, or at worst
the Exynos ops get called with someone else's domain and all hell breaks
loose.

The global ops/cache setup could probably all now be triggered from the
first IOMMU probe, as with dma_dev assigment, but for the time being the
simplest fix is to resurrect the logic from commit a7b67cd5d9af
("iommu/exynos: Play nice in multi-platform builds") to explicitly check
the DT for the presence of an Exynos IOMMU before trying anything.

Fixes: 928055a01b3f ("iommu/exynos: Remove custom platform device registration code")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iommu/exynos-iommu.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 79c45650f8de..736d4552d96f 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -1353,8 +1353,15 @@ static const struct iommu_ops exynos_iommu_ops = {
 
 static int __init exynos_iommu_init(void)
 {
+	struct device_node *np;
 	int ret;
 
+	np = of_find_matching_node(NULL, sysmmu_of_match);
+	if (!np)
+		return 0;
+
+	of_node_put(np);
+
 	lv2table_kmem_cache = kmem_cache_create("exynos-iommu-lv2table",
 				LV2TABLE_SIZE, LV2TABLE_SIZE, 0, NULL);
 	if (!lv2table_kmem_cache) {
-- 
2.15.1

[PATCH AUTOSEL for 4.15 034/189] powerpc: System reset avoid interleaving oops using die synchronisation

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 4552d128c26e0f0f27a5bd2fadc24092b8f6c1d7 ]

The die() oops path contains a serializing lock to prevent oops
messages from being interleaved. In the case of a system reset
initiated oops (e.g., qemu nmi command), __die was being called
which lacks that synchronisation and oops reports could be
interleaved across CPUs.

A recent patch 4388c9b3a6ee7 ("powerpc: Do not send system reset
request through the oops path") changed this to __die to avoid
the debugger() call, but there is no real harm to calling it twice
if the first time fell through. So go back to using die() here.
This was observed to fix the problem.

Fixes: 4388c9b3a6ee7 ("powerpc: Do not send system reset request through the oops path")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/kernel/traps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index f3eb61be0d30..109989676776 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -337,7 +337,7 @@ void system_reset_exception(struct pt_regs *regs)
 	 * No debugger or crash dump registered, print logs then
 	 * panic.
 	 */
-	__die("System Reset", regs, SIGABRT);
+	die("System Reset", regs, SIGABRT);
 
 	mdelay(2*MSEC_PER_SEC); /* Wait a little while for others to print */
 	add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 035/189] iommu/vt-d: Use domain instead of cache fetching

[Sasha Levin]

From: Peter Xu <peterx@redhat.com>

[ Upstream commit 9d2e6505f6d6934e681aed502f566198cb25c74a ]

after commit a1ddcbe93010 ("iommu/vt-d: Pass dmar_domain directly into
iommu_flush_iotlb_psi", 2015-08-12), we have domain pointer as parameter
to iommu_flush_iotlb_psi(), so no need to fetch it from cache again.

More importantly, a NULL reference pointer bug is reported on RHEL7 (and
it can be reproduced on some old upstream kernels too, e.g., v4.13) by
unplugging an 40g nic from a VM (hard to test unplug on real host, but
it should be the same):

https://bugzilla.redhat.com/show_bug.cgi?id=1531367

[   24.391863] pciehp 0000:00:03.0:pcie004: Slot(0): Attention button pressed
[   24.393442] pciehp 0000:00:03.0:pcie004: Slot(0): Powering off due to button press
[   29.721068] i40evf 0000:01:00.0: Unable to send opcode 2 to PF, err I40E_ERR_QUEUE_EMPTY, aq_err OK
[   29.783557] iommu: Removing device 0000:01:00.0 from group 3
[   29.784662] BUG: unable to handle kernel NULL pointer dereference at 0000000000000304
[   29.785817] IP: iommu_flush_iotlb_psi+0xcf/0x120
[   29.786486] PGD 0
[   29.786487] P4D 0
[   29.786812]
[   29.787390] Oops: 0000 [#1] SMP
[   29.787876] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_ng
[   29.795371] CPU: 0 PID: 156 Comm: kworker/0:2 Not tainted 4.13.0 #14
[   29.796366] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.11.0-1.el7 04/01/2014
[   29.797593] Workqueue: pciehp-0 pciehp_power_thread
[   29.798328] task: ffff94f5745b4a00 task.stack: ffffb326805ac000
[   29.799178] RIP: 0010:iommu_flush_iotlb_psi+0xcf/0x120
[   29.799919] RSP: 0018:ffffb326805afbd0 EFLAGS: 00010086
[   29.800666] RAX: ffff94f5bc56e800 RBX: 0000000000000000 RCX: 0000000200000025
[   29.801667] RDX: ffff94f5bc56e000 RSI: 0000000000000082 RDI: 0000000000000000
[   29.802755] RBP: ffffb326805afbf8 R08: 0000000000000000 R09: ffff94f5bc86bbf0
[   29.803772] R10: ffffb326805afba8 R11: 00000000000ffdc4 R12: ffff94f5bc86a400
[   29.804789] R13: 0000000000000000 R14: 00000000ffdc4000 R15: 0000000000000000
[   29.805792] FS:  0000000000000000(0000) GS:ffff94f5bfc00000(0000) knlGS:0000000000000000
[   29.806923] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   29.807736] CR2: 0000000000000304 CR3: 000000003499d000 CR4: 00000000000006f0
[   29.808747] Call Trace:
[   29.809156]  flush_unmaps_timeout+0x126/0x1c0
[   29.809800]  domain_exit+0xd6/0x100
[   29.810322]  device_notifier+0x6b/0x70
[   29.810902]  notifier_call_chain+0x4a/0x70
[   29.812822]  __blocking_notifier_call_chain+0x47/0x60
[   29.814499]  blocking_notifier_call_chain+0x16/0x20
[   29.816137]  device_del+0x233/0x320
[   29.817588]  pci_remove_bus_device+0x6f/0x110
[   29.819133]  pci_stop_and_remove_bus_device+0x1a/0x20
[   29.820817]  pciehp_unconfigure_device+0x7a/0x1d0
[   29.822434]  pciehp_disable_slot+0x52/0xe0
[   29.823931]  pciehp_power_thread+0x8a/0xa0
[   29.825411]  process_one_work+0x18c/0x3a0
[   29.826875]  worker_thread+0x4e/0x3b0
[   29.828263]  kthread+0x109/0x140
[   29.829564]  ? process_one_work+0x3a0/0x3a0
[   29.831081]  ? kthread_park+0x60/0x60
[   29.832464]  ret_from_fork+0x25/0x30
[   29.833794] Code: 85 ed 74 0b 5b 41 5c 41 5d 41 5e 41 5f 5d c3 49 8b 54 24 60 44 89 f8 0f b6 c4 48 8b 04 c2 48 85 c0 74 49 45 0f b6 ff 4a 8b 3c f8 <80> bf
[   29.838514] RIP: iommu_flush_iotlb_psi+0xcf/0x120 RSP: ffffb326805afbd0
[   29.840362] CR2: 0000000000000304
[   29.841716] ---[ end trace b10ec0d6900868d3 ]---

This patch fixes that problem if applied to v4.13 kernel.

The bug does not exist on latest upstream kernel since it's fixed as a
side effect of commit 13cf01744608 ("iommu/vt-d: Make use of iova
deferred flushing", 2017-08-15).  But IMHO it's still good to have this
patch upstream.

CC: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Fixes: a1ddcbe93010 ("iommu/vt-d: Pass dmar_domain directly into iommu_flush_iotlb_psi")
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iommu/intel-iommu.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 4a2de34895ec..869f37d1f3b7 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -1601,8 +1601,7 @@ static void iommu_flush_iotlb_psi(struct intel_iommu *iommu,
 	 * flush. However, device IOTLB doesn't need to be flushed in this case.
 	 */
 	if (!cap_caching_mode(iommu->cap) || !map)
-		iommu_flush_dev_iotlb(get_iommu_domain(iommu, did),
-				      addr, mask);
+		iommu_flush_dev_iotlb(domain, addr, mask);
 }
 
 static void iommu_flush_iova(struct iova_domain *iovad)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 036/189] dm thin: fix documentation relative to low water mark threshold

[Sasha Levin]

From: mulhern <amulhern@redhat.com>

[ Upstream commit 9b28a1102efc75d81298198166ead87d643a29ce ]

Fixes:
1. The use of "exceeds" when the opposite of exceeds, falls below,
was meant.
2. Properly speaking, a table can not exceed a threshold.

It emphasizes the important point, which is that it is the userspace
daemon's responsibility to check for low free space when a device
is resumed, since it won't get a special event indicating low free
space in that situation.

Signed-off-by: mulhern <amulhern@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 Documentation/device-mapper/thin-provisioning.txt | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
index 1699a55b7b70..ef639960b272 100644
--- a/Documentation/device-mapper/thin-provisioning.txt
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -112,9 +112,11 @@ $low_water_mark is expressed in blocks of size $data_block_size.  If
 free space on the data device drops below this level then a dm event
 will be triggered which a userspace daemon should catch allowing it to
 extend the pool device.  Only one such event will be sent.
-Resuming a device with a new table itself triggers an event so the
-userspace daemon can use this to detect a situation where a new table
-already exceeds the threshold.
+
+No special event is triggered if a just resumed device's free space is below
+the low water mark. However, resuming a device always triggers an
+event; a userspace daemon should verify that free space exceeds the low
+water mark when handling this event.
 
 A low water mark for the metadata device is maintained in the kernel and
 will trigger a dm event if free space on the metadata device drops below
-- 
2.15.1

[PATCH AUTOSEL for 4.15 037/189] dm mpath: return DM_MAPIO_REQUEUE on blk-mq rq allocation failure

[Sasha Levin]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 050af08ffb1b62af69196d61c22a0755f9a3cdbd ]

blk-mq will rerun queue via RESTART or dispatch wake after one request
is completed, so not necessary to wait random time for requeuing, we
should trust blk-mq to do it.

More importantly, we need to return BLK_STS_RESOURCE to blk-mq so that
dequeuing from the I/O scheduler can be stopped, this results in
improved I/O merging.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/dm-mpath.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 025e033ecb78..a3223c8fbaac 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -534,8 +534,20 @@ static int multipath_clone_and_map(struct dm_target *ti, struct request *rq,
 		if (queue_dying) {
 			atomic_inc(&m->pg_init_in_progress);
 			activate_or_offline_path(pgpath);
+			return DM_MAPIO_DELAY_REQUEUE;
 		}
-		return DM_MAPIO_DELAY_REQUEUE;
+
+		/*
+		 * blk-mq's SCHED_RESTART can cover this requeue, so we
+		 * needn't deal with it by DELAY_REQUEUE. More importantly,
+		 * we have to return DM_MAPIO_REQUEUE so that blk-mq can
+		 * get the queue busy feedback (via BLK_STS_RESOURCE),
+		 * otherwise I/O merging can suffer.
+		 */
+		if (q->mq_ops)
+			return DM_MAPIO_REQUEUE;
+		else
+			return DM_MAPIO_DELAY_REQUEUE;
 	}
 	clone->bio = clone->biotail = NULL;
 	clone->rq_disk = bdev->bd_disk;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 040/189] ubifs: Fix uninitialized variable in search_dh_cookie()

[Sasha Levin]

From: Geert Uytterhoeven <geert@linux-m68k.org>

[ Upstream commit c877154d307f4a91e0b5b85b75535713dab945ae ]

fs/ubifs/tnc.c: In function ‘search_dh_cookie’:
fs/ubifs/tnc.c:1893: warning: ‘err’ is used uninitialized in this function

Indeed, err is always used uninitialized.

According to an original review comment from Hyunchul, acknowledged by
Richard, err should be initialized to -ENOENT to avoid the first call to
tnc_next().  But we can achieve the same by reordering the code.

Fixes: 781f675e2d7e ("ubifs: Fix unlink code wrt. double hash lookups")
Reported-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/ubifs/tnc.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c
index 0a213dcba2a1..ba3d0e0f8615 100644
--- a/fs/ubifs/tnc.c
+++ b/fs/ubifs/tnc.c
@@ -1890,35 +1890,28 @@ static int search_dh_cookie(struct ubifs_info *c, const union ubifs_key *key,
 	union ubifs_key *dkey;
 
 	for (;;) {
-		if (!err) {
-			err = tnc_next(c, &znode, n);
-			if (err)
-				goto out;
-		}
-
 		zbr = &znode->zbranch[*n];
 		dkey = &zbr->key;
 
 		if (key_inum(c, dkey) != key_inum(c, key) ||
 		    key_type(c, dkey) != key_type(c, key)) {
-			err = -ENOENT;
-			goto out;
+			return -ENOENT;
 		}
 
 		err = tnc_read_hashed_node(c, zbr, dent);
 		if (err)
-			goto out;
+			return err;
 
 		if (key_hash(c, key) == key_hash(c, dkey) &&
 		    le32_to_cpu(dent->cookie) == cookie) {
 			*zn = znode;
-			goto out;
+			return 0;
 		}
-	}
-
-out:
 
-	return err;
+		err = tnc_next(c, &znode, n);
+		if (err)
+			return err;
+	}
 }
 
 static int do_lookup_dh(struct ubifs_info *c, const union ubifs_key *key,
-- 
2.15.1

[PATCH AUTOSEL for 4.15 039/189] nvme-fc: fix rogue admin cmds stalling teardown

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit d625d05ef0f0914a706d824fab85472a42be6659 ]

When connectivity is lost to a device, the association is terminated
and the blk-mq queues are quiesced/stopped. When connectivity is
re-established, they are resumed.

If an admin command is received while connectivity is list, the ioctl
queues the command on the admin_q and the command stalls (the thread
issuing the ioctl hangs/waits). if the connectivity is lost long
enough such that the controller is then deleted, the delete code
makes its calls to initiate the delete, which then expects the core
layer to call the transport when all references are removed and the
controller can be freed.  Unfortunately, nothing in this path dequeued
the admin command, so a reference sits outstanding and things stop,
hanging the delete indefinitely.

Correct by unquiescing the admin queue in the delete association. This
means any admin command (which should only be from an ioctl) issued
after connectivity is lost will detect the controller is in a
reconnecting state and will (fast) fail the command. Thus, a pending
reference can no longer be created.  Once connectivity is re-established,
a new ioctl/admin command would see proper device state and function again.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/nvme/host/fc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index 794e66e4aa20..8f9ddd0e392c 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -2921,6 +2921,9 @@ nvme_fc_delete_association(struct nvme_fc_ctrl *ctrl)
 	__nvme_fc_delete_hw_queue(ctrl, &ctrl->queues[0], 0);
 	nvme_fc_free_queue(&ctrl->queues[0]);
 
+	/* re-enable the admin_q so anything new can fast fail */
+	blk_mq_unquiesce_queue(ctrl->ctrl.admin_q);
+
 	nvme_fc_ctlr_inactive_on_rport(ctrl);
 }
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 041/189] net: stmmac: dwmac-meson8b: fix setting the RGMII TX clock on Meson8b

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 433c6cab9d298687c097f6ee82e49157044dc7c6 ]

Meson8b only supports MPLL2 as clock input. The rate of the MPLL2 clock
set by Odroid-C1's u-boot is close to (but not exactly) 500MHz. The
exact rate is 500002394Hz, which is calculated in
drivers/clk/meson/clk-mpll.c using the following formula:
DIV_ROUND_UP_ULL((u64)parent_rate * SDM_DEN, (SDM_DEN * n2) + sdm)
Odroid-C1's u-boot configures MPLL2 with the following values:
- SDM_DEN = 16384
- SDM = 1638
- N2 = 5

The 250MHz clock (m250_div) inside dwmac-meson8b driver is derived from
the MPLL2 clock. Due to MPLL2 running slightly faster than 500MHz the
common clock framework chooses a divider which is too big to generate
the 250MHz clock (a divider of 2 would be needed, but this is rounded up
to a divider of 3). This breaks the RTL8211F RGMII PHY on Odroid-C1
because it requires a (close to) 125MHz RGMII TX clock (on Gbit speeds,
the IP block internally divides that down to 25MHz on 100Mbit/s
connections and 2.5MHz on 10Mbit/s connections - we don't need any
special configuration for that).

Round the divider to the closest value to prevent this issue on Meson8b.
This means we'll now end up with a clock rate for the RGMII TX clock of
125001197Hz (= 125MHz plus 1197Hz), which is close-enough to 125MHz.
This has no effect on the Meson GX SoCs since there fclk_div2 is used as
input clock, which has a rate of 1000MHz (and thus is divisible cleanly
to 250MHz and 125MHz).

Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Reported-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index 4404650b32c5..157e12e15f28 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -144,7 +144,9 @@ static int meson8b_init_clk(struct meson8b_dwmac *dwmac)
 	dwmac->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT;
 	dwmac->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH;
 	dwmac->m250_div.hw.init = &init;
-	dwmac->m250_div.flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO;
+	dwmac->m250_div.flags = CLK_DIVIDER_ONE_BASED |
+				CLK_DIVIDER_ALLOW_ZERO |
+				CLK_DIVIDER_ROUND_CLOSEST;
 
 	dwmac->m250_div_clk = devm_clk_register(dev, &dwmac->m250_div.hw);
 	if (WARN_ON(IS_ERR(dwmac->m250_div_clk)))
-- 
2.15.1

[PATCH AUTOSEL for 4.15 042/189] net: stmmac: dwmac-meson8b: propagate rate changes to the parent clock

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit fb7d38a70e1d8ffd54f7a7464dcc4889d7e490ad ]

On Meson8b the only valid input clock is MPLL2. The bootloader
configures that to run at 500002394Hz which cannot be divided evenly
down to 125MHz using the m250_div clock. Currently the common clock
framework chooses a m250_div of 2 - with the internal fixed
"divide by 10" this results in a RGMII TX clock of 125001197Hz (120Hz
above the requested 125MHz).

Letting the common clock framework propagate the rate changes up to the
parent of m250_mux allows us to get the best possible clock rate. With
this patch the common clock framework calculates a rate of
very-close-to-250MHz (249999701Hz to be exact) for the MPLL2 clock
(which is the mux input). Dividing that by 2 (which is an internal,
fixed divider for the RGMII TX clock) gives us an RGMII TX clock of
124999850Hz (which is only 150Hz off the requested 125MHz, compared to
1197Hz based on the MPLL2 rate set by u-boot and the Amlogic GPL kernel
sources).

SoCs from the Meson GX series are not affected by this change because
the input clock is FCLK_DIV2 whose rate cannot be changed (which is fine
since it's running at 1GHz, so it's already a multiple of 250MHz and
125MHz).

Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index 157e12e15f28..8be4b32544ef 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -116,7 +116,7 @@ static int meson8b_init_clk(struct meson8b_dwmac *dwmac)
 	snprintf(clk_name, sizeof(clk_name), "%s#m250_sel", dev_name(dev));
 	init.name = clk_name;
 	init.ops = &clk_mux_ops;
-	init.flags = 0;
+	init.flags = CLK_SET_RATE_PARENT;
 	init.parent_names = mux_parent_names;
 	init.num_parents = MUX_CLK_NUM_PARENTS;
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 043/189] spi: a3700: Clear DATA_OUT when performing a read

[Sasha Levin]

From: Maxime Chevallier <maxime.chevallier@smile.fr>

[ Upstream commit 44a5f423e70374e5b42cecd85e78f2d79334e0f2 ]

When performing a read using FIFO mode, the spi controller shifts out
the last 2 bytes that were written in a previous transfer on MOSI.

This undocumented behaviour can cause devices to misinterpret the
transfer, so we explicitly clear the WFIFO before each read.

This behaviour was noticed on EspressoBin.

Signed-off-by: Maxime Chevallier <maxime.chevallier@smile.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/spi/spi-armada-3700.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c
index d65345312527..c11ea6c169a4 100644
--- a/drivers/spi/spi-armada-3700.c
+++ b/drivers/spi/spi-armada-3700.c
@@ -615,6 +615,11 @@ static int a3700_spi_transfer_one(struct spi_master *master,
 	a3700_spi_header_set(a3700_spi);
 
 	if (xfer->rx_buf) {
+		/* Clear WFIFO, since it's last 2 bytes are shifted out during
+		 * a read operation
+		 */
+		spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, 0);
+
 		/* Set read data length */
 		spireg_write(a3700_spi, A3700_SPI_IF_DIN_CNT_REG,
 			     a3700_spi->buf_len);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 044/189] ASoC: bcm2835: fix hw_params error when device is in prepared state

[Sasha Levin]

From: Matthias Reichl <hias@horus.com>

[ Upstream commit 8d5737a5f53902a916ee1e1cb248c9b8b883b2ea ]

If bcm2835 is configured as bitclock master calling hw_params()
after prepare() fails with EBUSY. This also makes it impossible to
use bcm2835 in full duplex mode.

The error is caused by the split clock setup: clk_set_rate
is called in hw_params, clk_prepare_enable in prepare. As hw_params
doesn't check if the clock was already enabled clk_set_rate
fails with EBUSY.

Fix this by moving clock startup from prepare to hw_params and
let hw_params properly deal with an already set up or enabled
clock.

Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/bcm/bcm2835-i2s.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c
index 2e449d7173fc..d5f73a8ab893 100644
--- a/sound/soc/bcm/bcm2835-i2s.c
+++ b/sound/soc/bcm/bcm2835-i2s.c
@@ -130,6 +130,7 @@ struct bcm2835_i2s_dev {
 	struct regmap				*i2s_regmap;
 	struct clk				*clk;
 	bool					clk_prepared;
+	int					clk_rate;
 };
 
 static void bcm2835_i2s_start_clock(struct bcm2835_i2s_dev *dev)
@@ -419,10 +420,19 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	/* Clock should only be set up here if CPU is clock master */
-	if (bit_clock_master) {
-		ret = clk_set_rate(dev->clk, bclk_rate);
-		if (ret)
-			return ret;
+	if (bit_clock_master &&
+	    (!dev->clk_prepared || dev->clk_rate != bclk_rate)) {
+		if (dev->clk_prepared)
+			bcm2835_i2s_stop_clock(dev);
+
+		if (dev->clk_rate != bclk_rate) {
+			ret = clk_set_rate(dev->clk, bclk_rate);
+			if (ret)
+				return ret;
+			dev->clk_rate = bclk_rate;
+		}
+
+		bcm2835_i2s_start_clock(dev);
 	}
 
 	/* Setup the frame format */
@@ -618,8 +628,6 @@ static int bcm2835_i2s_prepare(struct snd_pcm_substream *substream,
 	struct bcm2835_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
 	uint32_t cs_reg;
 
-	bcm2835_i2s_start_clock(dev);
-
 	/*
 	 * Clear both FIFOs if the one that should be started
 	 * is not empty at the moment. This should only happen
-- 
2.15.1

[PATCH AUTOSEL for 4.15 045/189] IB/cq: Don't force IB_POLL_DIRECT poll context for ib_process_cq_direct

[Sasha Levin]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit 246d8b184c100e8eb6b4e8c88f232c2ed2a4e672 ]

polling the completion queue directly does not interfere
with the existing polling logic, hence drop the requirement.
Be aware that running ib_process_cq_direct with non IB_POLL_DIRECT
CQ may trigger concurrent CQ processing.

This can be used for polling mode ULPs.

Cc: Bart Van Assche <bart.vanassche@wdc.com>
Reported-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
[maxg: added wcs array argument to __ib_process_cq]
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/cq.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/infiniband/core/cq.c b/drivers/infiniband/core/cq.c
index f2ae75fa3128..c8c5a5a7f433 100644
--- a/drivers/infiniband/core/cq.c
+++ b/drivers/infiniband/core/cq.c
@@ -25,9 +25,10 @@
 #define IB_POLL_FLAGS \
 	(IB_CQ_NEXT_COMP | IB_CQ_REPORT_MISSED_EVENTS)
 
-static int __ib_process_cq(struct ib_cq *cq, int budget)
+static int __ib_process_cq(struct ib_cq *cq, int budget, struct ib_wc *poll_wc)
 {
 	int i, n, completed = 0;
+	struct ib_wc *wcs = poll_wc ? : cq->wc;
 
 	/*
 	 * budget might be (-1) if the caller does not
@@ -35,9 +36,9 @@ static int __ib_process_cq(struct ib_cq *cq, int budget)
 	 * minimum here.
 	 */
 	while ((n = ib_poll_cq(cq, min_t(u32, IB_POLL_BATCH,
-			budget - completed), cq->wc)) > 0) {
+			budget - completed), wcs)) > 0) {
 		for (i = 0; i < n; i++) {
-			struct ib_wc *wc = &cq->wc[i];
+			struct ib_wc *wc = &wcs[i];
 
 			if (wc->wr_cqe)
 				wc->wr_cqe->done(cq, wc);
@@ -60,18 +61,20 @@ static int __ib_process_cq(struct ib_cq *cq, int budget)
  * @cq:		CQ to process
  * @budget:	number of CQEs to poll for
  *
- * This function is used to process all outstanding CQ entries on a
- * %IB_POLL_DIRECT CQ.  It does not offload CQ processing to a different
- * context and does not ask for completion interrupts from the HCA.
+ * This function is used to process all outstanding CQ entries.
+ * It does not offload CQ processing to a different context and does
+ * not ask for completion interrupts from the HCA.
+ * Using direct processing on CQ with non IB_POLL_DIRECT type may trigger
+ * concurrent processing.
  *
  * Note: do not pass -1 as %budget unless it is guaranteed that the number
  * of completions that will be processed is small.
  */
 int ib_process_cq_direct(struct ib_cq *cq, int budget)
 {
-	WARN_ON_ONCE(cq->poll_ctx != IB_POLL_DIRECT);
+	struct ib_wc wcs[IB_POLL_BATCH];
 
-	return __ib_process_cq(cq, budget);
+	return __ib_process_cq(cq, budget, wcs);
 }
 EXPORT_SYMBOL(ib_process_cq_direct);
 
@@ -85,7 +88,7 @@ static int ib_poll_handler(struct irq_poll *iop, int budget)
 	struct ib_cq *cq = container_of(iop, struct ib_cq, iop);
 	int completed;
 
-	completed = __ib_process_cq(cq, budget);
+	completed = __ib_process_cq(cq, budget, NULL);
 	if (completed < budget) {
 		irq_poll_complete(&cq->iop);
 		if (ib_req_notify_cq(cq, IB_POLL_FLAGS) > 0)
@@ -105,7 +108,7 @@ static void ib_cq_poll_work(struct work_struct *work)
 	struct ib_cq *cq = container_of(work, struct ib_cq, work);
 	int completed;
 
-	completed = __ib_process_cq(cq, IB_POLL_BUDGET_WORKQUEUE);
+	completed = __ib_process_cq(cq, IB_POLL_BUDGET_WORKQUEUE, NULL);
 	if (completed >= IB_POLL_BUDGET_WORKQUEUE ||
 	    ib_req_notify_cq(cq, IB_POLL_FLAGS) > 0)
 		queue_work(ib_comp_wq, &cq->work);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 046/189] nfs: Do not convert nfs_idmap_cache_timeout to jiffies

[Sasha Levin]

From: Jan Chochol <jan@chochol.info>

[ Upstream commit cbebc6ef4fc830f4040d4140bf53484812d5d5d9 ]

Since commit 57e62324e469 ("NFS: Store the legacy idmapper result in the
keyring") nfs_idmap_cache_timeout changed units from jiffies to seconds.
Unfortunately sysctl interface was not updated accordingly.

As a effect updating /proc/sys/fs/nfs/idmap_cache_timeout with some
value will incorrectly multiply this value by HZ.
Also reading /proc/sys/fs/nfs/idmap_cache_timeout will show real value
divided by HZ.

Fixes: 57e62324e469 ("NFS: Store the legacy idmapper result in the keyring")
Signed-off-by: Jan Chochol <jan@chochol.info>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/nfs/nfs4sysctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4sysctl.c b/fs/nfs/nfs4sysctl.c
index 0d91d84e5822..c394e4447100 100644
--- a/fs/nfs/nfs4sysctl.c
+++ b/fs/nfs/nfs4sysctl.c
@@ -32,7 +32,7 @@ static struct ctl_table nfs4_cb_sysctls[] = {
 		.data = &nfs_idmap_cache_timeout,
 		.maxlen = sizeof(int),
 		.mode = 0644,
-		.proc_handler = proc_dointvec_jiffies,
+		.proc_handler = proc_dointvec,
 	},
 	{ }
 };
-- 
2.15.1

[PATCH AUTOSEL for 4.15 047/189] MIPS: Fix clean of vmlinuz.{32,ecoff,bin,srec}

[Sasha Levin]

From: James Hogan <jhogan@kernel.org>

[ Upstream commit 5f2483eb2423152445b39f2db59d372f523e664e ]

Make doesn't expand shell style "vmlinuz.{32,ecoff,bin,srec}" to the 4
separate files, so none of these files get cleaned up by make clean.
List the files separately instead.

Fixes: ec3352925b74 ("MIPS: Remove all generated vmlinuz* files on "make clean"")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18491/
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/boot/compressed/Makefile | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index c675eece389a..adce180f3ee4 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -133,4 +133,8 @@ vmlinuz.srec: vmlinuz
 uzImage.bin: vmlinuz.bin FORCE
 	$(call if_changed,uimage,none)
 
-clean-files := $(objtree)/vmlinuz $(objtree)/vmlinuz.{32,ecoff,bin,srec}
+clean-files += $(objtree)/vmlinuz
+clean-files += $(objtree)/vmlinuz.32
+clean-files += $(objtree)/vmlinuz.ecoff
+clean-files += $(objtree)/vmlinuz.bin
+clean-files += $(objtree)/vmlinuz.srec
-- 
2.15.1

[PATCH AUTOSEL for 4.15 048/189] clk: ingenic: Fix recalc_rate for clocks with fixed divider

[Sasha Levin]

From: Paul Cercueil <paul@crapouillou.net>

[ Upstream commit e6cfa64375d34a6c8c1861868a381013b2d3b921 ]

Previously, the clocks with a fixed divider would report their rate
as being the same as the one of their parent, independently of the
divider in use. This commit fixes this behaviour.

This went unnoticed as neither the jz4740 nor the jz4780 CGU code
have clocks with fixed dividers yet.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18477/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/ingenic/cgu.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index ab393637f7b0..a2e73a6d60fd 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -328,6 +328,8 @@ ingenic_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 		div *= clk_info->div.div;
 
 		rate /= div;
+	} else if (clk_info->type & CGU_CLK_FIXDIV) {
+		rate /= clk_info->fixdiv.div;
 	}
 
 	return rate;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 049/189] MIPS: JZ4770: Work around config2 misreporting associativity

[Sasha Levin]

From: Maarten ter Huurne <maarten@treewalker.org>

[ Upstream commit 1f7412e0e2f327fe7dc5a0c2fc36d7b319d05d47 ]

According to config2, the associativity would be 5-ways, but the
documentation states 4-ways, which also matches the documented
L2 cache size of 256 kB.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18488/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/mm/sc-mips.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 548acb7f8557..394673991bab 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -16,6 +16,7 @@
 #include <asm/mmu_context.h>
 #include <asm/r4kcache.h>
 #include <asm/mips-cps.h>
+#include <asm/bootinfo.h>
 
 /*
  * MIPS32/MIPS64 L2 cache handling
@@ -220,6 +221,14 @@ static inline int __init mips_sc_probe(void)
 	else
 		return 0;
 
+	/*
+	 * According to config2 it would be 5-ways, but that is contradicted
+	 * by all documentation.
+	 */
+	if (current_cpu_type() == CPU_JZRISC &&
+				mips_machtype == MACH_INGENIC_JZ4770)
+		c->scache.ways = 4;
+
 	c->scache.waysize = c->scache.sets * c->scache.linesz;
 	c->scache.waybit = __ffs(c->scache.waysize);
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 050/189] PCI: Add dummy pci_irqd_intx_xlate() for CONFIG_PCI=n build

[Sasha Levin]

From: Niklas Cassel <niklas.cassel@axis.com>

[ Upstream commit 80db6f08b7af93eddc9487535e6150b220262637 ]

Some hardware can operate in either "host" or "endpoint" mode, which means
there can be both a host bridge driver and an endpoint driver for the same
device.  Those drivers share a lot of code, so sometimes they live in the
same source file.

The host bridge driver requires CONFIG_PCI=y because it enumerates PCI
devices below the bridge using the PCI core.  The endpoint driver does not
require CONFIG_PCI=y because it runs in an embedded kernel on the other
side of the device, e.g., on an adapter card.

pci-dra7xx.c contains both host and endpoint drivers.  If we select only
the endpoint driver (CONFIG_PCI=n and CONFIG_PCI_DRA7XX_EP=y), the unneeded
host driver is still compiled.  It references pci_irqd_intx_xlate(), which
is not present when CONFIG_PCI=n, which causes this error:

  drivers/pci/dwc/pci-dra7xx.c:229:11: error: 'pci_irqd_intx_xlate' undeclared here (not in a function)

Add a dummy pci_irqd_intx_xlate() for the CONFIG_PCI=n case.

[bhelgaas: changelog]
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/linux/pci.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/include/linux/pci.h b/include/linux/pci.h
index c170c9250c8b..f69944699317 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1686,6 +1686,13 @@ static inline int pci_get_new_domain_nr(void) { return -ENOSYS; }
 #define dev_is_pf(d) (false)
 static inline bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags)
 { return false; }
+static inline int pci_irqd_intx_xlate(struct irq_domain *d,
+				      struct device_node *node,
+				      const u32 *intspec,
+				      unsigned int intsize,
+				      unsigned long *out_hwirq,
+				      unsigned int *out_type)
+{ return -EINVAL; }
 #endif /* CONFIG_PCI */
 
 /* Include architecture-dependent settings and functions */
-- 
2.15.1

[PATCH AUTOSEL for 4.15 051/189] watchdog: sp5100_tco: Fix watchdog disable bit

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit f541c09ebfc61697b586b38c9ebaf4b70defb278 ]

According to all published information, the watchdog disable bit for SB800
compatible controllers is bit 1 of PM register 0x48, not bit 2. For the
most part that doesn't matter in practice, since the bit has to be cleared
to enable watchdog address decoding, which is the default setting, but it
still needs to be fixed.

Cc: Zoltán Böszörményi <zboszor@pr.hu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/watchdog/sp5100_tco.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/sp5100_tco.h b/drivers/watchdog/sp5100_tco.h
index 1af4dee71337..0e242d1110ce 100644
--- a/drivers/watchdog/sp5100_tco.h
+++ b/drivers/watchdog/sp5100_tco.h
@@ -55,7 +55,7 @@
 #define SB800_PM_WATCHDOG_CONFIG	0x4C
 
 #define SB800_PCI_WATCHDOG_DECODE_EN	(1 << 0)
-#define SB800_PM_WATCHDOG_DISABLE	(1 << 2)
+#define SB800_PM_WATCHDOG_DISABLE	(1 << 1)
 #define SB800_PM_WATCHDOG_SECOND_RES	(3 << 0)
 #define SB800_ACPI_MMIO_DECODE_EN	(1 << 0)
 #define SB800_ACPI_MMIO_SEL		(1 << 1)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 052/189] ARM: 8738/1: Disable CONFIG_DEBUG_VIRTUAL for NOMMU

[Sasha Levin]

From: Vladimir Murzin <vladimir.murzin@arm.com>

[ Upstream commit c7780ab56c091a9ba95a3278e6e1d9c73afb5052 ]

While running MPS2 platform (NOMMU) with DTB placed below PHYS_OFFSET
following warning poped up:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/arm/mm/physaddr.c:42 __virt_to_phys+0x2f/0x40
virt_to_phys used for non-linear address: 00004000 (0x4000)
CPU: 0 PID: 0 Comm: swapper Not tainted 4.15.0-rc1-5a31bf2-clean+ #2767
Hardware name: MPS2 (Device Tree Support)
[<2100bf39>] (unwind_backtrace) from [<2100b3ff>] (show_stack+0xb/0xc)
[<2100b3ff>] (show_stack) from [<2100e697>] (__warn+0x87/0xac)
[<2100e697>] (__warn) from [<2100e6db>] (warn_slowpath_fmt+0x1f/0x28)
[<2100e6db>] (warn_slowpath_fmt) from [<2100c603>] (__virt_to_phys+0x2f/0x40)
[<2100c603>] (__virt_to_phys) from [<2116a499>] (early_init_fdt_reserve_self+0xd/0x24)
[<2116a499>] (early_init_fdt_reserve_self) from [<2116222d>] (arm_memblock_init+0xb5/0xf8)
[<2116222d>] (arm_memblock_init) from [<21161cad>] (setup_arch+0x38b/0x50e)
[<21161cad>] (setup_arch) from [<21160455>] (start_kernel+0x31/0x280)
[<21160455>] (start_kernel) from [<00000000>] (  (null))
random: get_random_bytes called from init_oops_id+0x17/0x2c with crng_init=0
---[ end trace 0000000000000000 ]---

Platforms without MMU support run with 1:1 (i.e. linear) memory
mapping, so disable CONFIG_DEBUG_VIRTUAL.

Fixes: e377cd8221eb ("ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 51c8df561077..2c7e23e206da 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -4,7 +4,7 @@ config ARM
 	default y
 	select ARCH_CLOCKSOURCE_DATA
 	select ARCH_DISCARD_MEMBLOCK if !HAVE_ARCH_PFN_VALID
-	select ARCH_HAS_DEBUG_VIRTUAL
+	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_SET_MEMORY
-- 
2.15.1

[PATCH AUTOSEL for 4.15 053/189] ARM: 8740/1: NOMMU: Make sure we do not hold stale data in mem[] array

[Sasha Levin]

From: Vladimir Murzin <vladimir.murzin@arm.com>

[ Upstream commit 636e645f1f2a5826beacd23548696f1655b0b5d8 ]

adjust_lowmem_bounds() called twice which can lead to stalled data
(i.e. subreg) value in mem[] array after the first call.

Zero out mem[] array before we allocate MPU regions for memory.

Fixes: 5c9d9a1b3a54 ("ARM: 8712/1: NOMMU: Use more MPU regions to cover memory")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/mm/pmsa-v7.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mm/pmsa-v7.c b/arch/arm/mm/pmsa-v7.c
index 976df60ac426..f65c01fba9f4 100644
--- a/arch/arm/mm/pmsa-v7.c
+++ b/arch/arm/mm/pmsa-v7.c
@@ -6,6 +6,7 @@
 
 #include <linux/bitops.h>
 #include <linux/memblock.h>
+#include <linux/string.h>
 
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
@@ -296,6 +297,7 @@ void __init adjust_lowmem_bounds_mpu(void)
 		}
 	}
 
+	memset(mem, 0, sizeof(mem));
 	num = allocate_region(mem_start, specified_mem_size, mem_max_regions, mem);
 
 	for (i = 0; i < num; i++) {
-- 
2.15.1

[PATCH AUTOSEL for 4.15 054/189] kconfig: Don't leak main menus during parsing

[Sasha Levin]

From: Ulf Magnusson <ulfalizer@gmail.com>

[ Upstream commit 0724a7c32a54e3e50d28e19e30c59014f61d4e2c ]

If a 'mainmenu' entry appeared in the Kconfig files, two things would
leak:

	- The 'struct property' allocated for the default "Linux Kernel
	  Configuration" prompt.

	- The string for the T_WORD/T_WORD_QUOTE prompt after the
	  T_MAINMENU token, allocated on the heap in zconf.l.

To fix it, introduce a new 'no_mainmenu_stmt' nonterminal that matches
if there's no 'mainmenu' and adds the default prompt. That means the
prompt only gets allocated once regardless of whether there's a
'mainmenu' statement or not, and managing it becomes simple.

Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:

	LEAK SUMMARY:
	   definitely lost: 344,568 bytes in 14,352 blocks
	   ...

Summary after the fix:

	LEAK SUMMARY:
	   definitely lost: 344,440 bytes in 14,350 blocks
	   ...

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 scripts/kconfig/zconf.y | 33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y
index c8f396c3b190..20d9caa4be99 100644
--- a/scripts/kconfig/zconf.y
+++ b/scripts/kconfig/zconf.y
@@ -108,7 +108,27 @@ static struct menu *current_menu, *current_entry;
 %%
 input: nl start | start;
 
-start: mainmenu_stmt stmt_list | stmt_list;
+start: mainmenu_stmt stmt_list | no_mainmenu_stmt stmt_list;
+
+/* mainmenu entry */
+
+mainmenu_stmt: T_MAINMENU prompt nl
+{
+	menu_add_prompt(P_MENU, $2, NULL);
+};
+
+/* Default main menu, if there's no mainmenu entry */
+
+no_mainmenu_stmt: /* empty */
+{
+	/*
+	 * Hack: Keep the main menu title on the heap so we can safely free it
+	 * later regardless of whether it comes from the 'prompt' in
+	 * mainmenu_stmt or here
+	 */
+	menu_add_prompt(P_MENU, strdup("Linux Kernel Configuration"), NULL);
+};
+
 
 stmt_list:
 	  /* empty */
@@ -351,13 +371,6 @@ if_block:
 	| if_block choice_stmt
 ;
 
-/* mainmenu entry */
-
-mainmenu_stmt: T_MAINMENU prompt nl
-{
-	menu_add_prompt(P_MENU, $2, NULL);
-};
-
 /* menu entry */
 
 menu: T_MENU prompt T_EOL
@@ -502,6 +515,7 @@ word_opt: /* empty */			{ $$ = NULL; }
 
 void conf_parse(const char *name)
 {
+	const char *tmp;
 	struct symbol *sym;
 	int i;
 
@@ -509,7 +523,6 @@ void conf_parse(const char *name)
 
 	sym_init();
 	_menu_init();
-	rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL);
 
 	if (getenv("ZCONF_DEBUG"))
 		zconfdebug = 1;
@@ -519,8 +532,10 @@ void conf_parse(const char *name)
 	if (!modules_sym)
 		modules_sym = sym_find( "n" );
 
+	tmp = rootmenu.prompt->text;
 	rootmenu.prompt->text = _(rootmenu.prompt->text);
 	rootmenu.prompt->text = sym_expand_string_value(rootmenu.prompt->text);
+	free((char*)tmp);
 
 	menu_finalize(&rootmenu);
 	for_all_symbols(i, sym) {
-- 
2.15.1

[PATCH AUTOSEL for 4.15 056/189] kconfig: Fix expr_free() E_NOT leak

[Sasha Levin]

From: Ulf Magnusson <ulfalizer@gmail.com>

[ Upstream commit 5b1374b3b3c2fc4f63a398adfa446fb8eff791a4 ]

Only the E_NOT operand and not the E_NOT node itself was freed, due to
accidentally returning too early in expr_free(). Outline of leak:

	switch (e->type) {
	...
	case E_NOT:
		expr_free(e->left.expr);
		return;
	...
	}
	*Never reached, 'e' leaked*
	free(e);

Fix by changing the 'return' to a 'break'.

Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:

	LEAK SUMMARY:
	   definitely lost: 44,448 bytes in 1,852 blocks
	   ...

Summary after the fix:

	LEAK SUMMARY:
	   definitely lost: 1,608 bytes in 67 blocks
	   ...

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 scripts/kconfig/expr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/kconfig/expr.c b/scripts/kconfig/expr.c
index 8cee597d33a5..ee23ebc881a6 100644
--- a/scripts/kconfig/expr.c
+++ b/scripts/kconfig/expr.c
@@ -113,7 +113,7 @@ void expr_free(struct expr *e)
 		break;
 	case E_NOT:
 		expr_free(e->left.expr);
-		return;
+		break;
 	case E_EQUAL:
 	case E_GEQ:
 	case E_GTH:
-- 
2.15.1

[PATCH AUTOSEL for 4.15 055/189] kconfig: Fix automatic menu creation mem leak

[Sasha Levin]

From: Ulf Magnusson <ulfalizer@gmail.com>

[ Upstream commit ae7440ef0c8013d68c00dad6900e7cce5311bb1c ]

expr_trans_compare() always allocates and returns a new expression,
giving the following leak outline:

	...
	*Allocate*
	basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no);
	...
	for (menu = parent->next; menu; menu = menu->next) {
		...
		*Copy*
		dep2 = expr_copy(basedep);
		...
		*Free copy*
		expr_free(dep2);
	}
	*basedep lost!*

Fix by freeing 'basedep' after the loop.

Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:

	LEAK SUMMARY:
	   definitely lost: 344,376 bytes in 14,349 blocks
	   ...

Summary after the fix:

	LEAK SUMMARY:
	   definitely lost: 44,448 bytes in 1,852 blocks
	   ...

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 scripts/kconfig/menu.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index e9357931b47d..749c2bd5fc51 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -372,6 +372,7 @@ void menu_finalize(struct menu *parent)
 			menu->parent = parent;
 			last_menu = menu;
 		}
+		expr_free(basedep);
 		if (last_menu) {
 			parent->list = parent->next;
 			parent->next = last_menu->next;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 057/189] powerpc/tm: Fix endianness flip on trap

[Sasha Levin]

From: Gustavo Romero <gromero@linux.vnet.ibm.com>

[ Upstream commit 1c200e63d055ec0125e44a5e386b9b78aada7eb3 ]

Currently it's possible that a thread on PPC64 LE has its endianness
flipped inadvertently to Big-Endian resulting in a crash once the process
is back from the signal handler.

If giveup_all() is called when regs->msr has the bits MSR.FP and MSR.VEC
disabled (and hence MSR.VSX disabled too) it returns without calling
check_if_tm_restore_required() which copies regs->msr to ckpt_regs->msr if
the process caught a signal whilst in transactional mode. Then once in
setup_tm_sigcontexts() MSR from ckpt_regs.msr is used, but since
check_if_tm_restore_required() was not called previuosly, gp_regs[PT_MSR]
gets a copy of invalid MSR bits as MSR in ckpt_regs was not updated from
regs->msr and so is zeroed. Later when leaving the signal handler once in
sys_rt_sigreturn() the TS bits of gp_regs[PT_MSR] are checked to determine
if restore_tm_sigcontexts() must be called to pull in the correct MSR state
into the user context. Because TS bits are zeroed
restore_tm_sigcontexts() is never called and MSR restored from the user
context on returning from the signal handler has the MSR.LE (the endianness
bit) forced to zero (Big-Endian). That leads, for instance, to 'nop' being
treated as an illegal instruction in the following sequence:

	tbegin.
	beq	1f
	trap
	tend.
1:	nop

on PPC64 LE machines and the process dies just after returning from the
signal handler.

PPC64 BE is also affected but in a subtle way since forcing Big-Endian on
a BE machine does not change the endianness.

This commit fixes the issue described above by ensuring that once in
setup_tm_sigcontexts() the MSR used is from regs->msr instead of from
ckpt_regs->msr and by ensuring that we pull in only the MSR.FP, MSR.VEC,
and MSR.VSX bits from ckpt_regs->msr.

The fix was tested both on LE and BE machines and no regression regarding
the powerpc/tm selftests was observed.

Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/kernel/signal_64.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 4b9ca3570344..b1b9962db3dd 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -207,7 +207,7 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
 	elf_vrreg_t __user *tm_v_regs = sigcontext_vmx_regs(tm_sc);
 #endif
 	struct pt_regs *regs = tsk->thread.regs;
-	unsigned long msr = tsk->thread.ckpt_regs.msr;
+	unsigned long msr = tsk->thread.regs->msr;
 	long err = 0;
 
 	BUG_ON(tsk != current);
@@ -216,6 +216,12 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
 
 	WARN_ON(tm_suspend_disabled);
 
+	/* Restore checkpointed FP, VEC, and VSX bits from ckpt_regs as
+	 * it contains the correct FP, VEC, VSX state after we treclaimed
+	 * the transaction and giveup_all() was called on reclaiming.
+	 */
+	msr |= tsk->thread.ckpt_regs.msr & (MSR_FP | MSR_VEC | MSR_VSX);
+
 	/* Remove TM bits from thread's MSR.  The MSR in the sigcontext
 	 * just indicates to userland that we were doing a transaction, but we
 	 * don't want to return in transactional state.  This also ensures
-- 
2.15.1

[PATCH AUTOSEL for 4.15 058/189] powerpc/pseries, ps3: panic flush kernel messages before halting system

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 35adacd6fc48d658419522f192a3c8b2785612da ]

Platforms with a panic handler that halts the system can have problems
getting kernel messages out, because the panic notifiers are called
before kernel/panic.c does its flushing of printk buffers an console
etc.

This was attempted to be solved with commit a3b2cb30f252 ("powerpc: Do
not call ppc_md.panic in fadump panic notifier"), but that wasn't the
right approach and caused other problems, and was reverted by commit
ab9dbf771ff9.

Instead, the powernv shutdown paths have already had a similar
problem, fixed by taking the message flushing sequence from
kernel/panic.c. That's a little bit ugly, but while we have the code
duplicated, it will work for this case as well. So have ppc panic
handlers do the same flushing before they terminate.

Without this patch, a qemu pseries_le_defconfig guest stops silently
when issued the nmi command when xmon is off and no crash dumpers
enabled. Afterwards, an oops is printed by each CPU as expected.

Fixes: ab9dbf771ff9 ("Revert "powerpc: Do not call ppc_md.panic in fadump panic notifier"")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/include/asm/bug.h         |  3 ++-
 arch/powerpc/kernel/traps.c            | 24 ++++++++++++++++++++++++
 arch/powerpc/platforms/powernv/opal.c  | 18 ++++--------------
 arch/powerpc/platforms/ps3/setup.c     |  1 +
 arch/powerpc/platforms/pseries/setup.c |  8 +++++++-
 5 files changed, 38 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h
index 3c04249bcf39..bca101ee1f32 100644
--- a/arch/powerpc/include/asm/bug.h
+++ b/arch/powerpc/include/asm/bug.h
@@ -135,7 +135,8 @@ extern void bad_page_fault(struct pt_regs *, unsigned long, int);
 extern void _exception(int, struct pt_regs *, int, unsigned long);
 extern void die(const char *, struct pt_regs *, long);
 extern bool die_will_crash(void);
-
+extern void panic_flush_kmsg_start(void);
+extern void panic_flush_kmsg_end(void);
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 109989676776..37c1ea9b0642 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -38,6 +38,8 @@
 #include <linux/ratelimit.h>
 #include <linux/context_tracking.h>
 #include <linux/smp.h>
+#include <linux/console.h>
+#include <linux/kmsg_dump.h>
 
 #include <asm/emulated_ops.h>
 #include <asm/pgtable.h>
@@ -142,6 +144,28 @@ static int die_owner = -1;
 static unsigned int die_nest_count;
 static int die_counter;
 
+extern void panic_flush_kmsg_start(void)
+{
+	/*
+	 * These are mostly taken from kernel/panic.c, but tries to do
+	 * relatively minimal work. Don't use delay functions (TB may
+	 * be broken), don't crash dump (need to set a firmware log),
+	 * don't run notifiers. We do want to get some information to
+	 * Linux console.
+	 */
+	console_verbose();
+	bust_spinlocks(1);
+}
+
+extern void panic_flush_kmsg_end(void)
+{
+	printk_safe_flush_on_panic();
+	kmsg_dump(KMSG_DUMP_PANIC);
+	bust_spinlocks(0);
+	debug_locks_off();
+	console_flush_on_panic();
+}
+
 static unsigned long oops_begin(struct pt_regs *regs)
 {
 	int cpu;
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 041ddbd1fc57..c23a9cca6268 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -461,24 +461,14 @@ static int opal_recover_mce(struct pt_regs *regs,
 
 void pnv_platform_error_reboot(struct pt_regs *regs, const char *msg)
 {
-	/*
-	 * This is mostly taken from kernel/panic.c, but tries to do
-	 * relatively minimal work. Don't use delay functions (TB may
-	 * be broken), don't crash dump (need to set a firmware log),
-	 * don't run notifiers. We do want to get some information to
-	 * Linux console.
-	 */
-	console_verbose();
-	bust_spinlocks(1);
+	panic_flush_kmsg_start();
+
 	pr_emerg("Hardware platform error: %s\n", msg);
 	if (regs)
 		show_regs(regs);
 	smp_send_stop();
-	printk_safe_flush_on_panic();
-	kmsg_dump(KMSG_DUMP_PANIC);
-	bust_spinlocks(0);
-	debug_locks_off();
-	console_flush_on_panic();
+
+	panic_flush_kmsg_end();
 
 	/*
 	 * Don't bother to shut things down because this will
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 6244bc849469..77a37520068d 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -113,6 +113,7 @@ static void ps3_panic(char *str)
 	printk("   System does not reboot automatically.\n");
 	printk("   Please press POWER button.\n");
 	printk("\n");
+	panic_flush_kmsg_end();
 
 	while(1)
 		lv1_pause(1);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index ae4f596273b5..69d11ecd45e1 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -533,6 +533,12 @@ static void __init pSeries_setup_arch(void)
 	ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare;
 }
 
+static void pseries_panic(char *str)
+{
+	panic_flush_kmsg_end();
+	rtas_os_term(str);
+}
+
 static int __init pSeries_init_panel(void)
 {
 	/* Manually leave the kernel version on the panel. */
@@ -761,7 +767,7 @@ define_machine(pseries) {
 	.pcibios_fixup		= pSeries_final_fixup,
 	.restart		= rtas_restart,
 	.halt			= rtas_halt,
-	.panic			= rtas_os_term,
+	.panic			= pseries_panic,
 	.get_boot_time		= rtas_get_boot_time,
 	.get_rtc_time		= rtas_get_rtc_time,
 	.set_rtc_time		= rtas_set_rtc_time,
-- 
2.15.1

[PATCH AUTOSEL for 4.15 060/189] ipmi/powernv: Fix error return code in ipmi_powernv_probe()

[Sasha Levin]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit e749d328b0b450aa78d562fa26a0cd8872325dd9 ]

Fix to return a negative error code from the request_irq() error
handling case instead of 0, as done elsewhere in this function.

Fixes: dce143c3381c ("ipmi/powernv: Convert to irq event interface")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/char/ipmi/ipmi_powernv.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_powernv.c b/drivers/char/ipmi/ipmi_powernv.c
index 07fddbefefe4..193baf31f778 100644
--- a/drivers/char/ipmi/ipmi_powernv.c
+++ b/drivers/char/ipmi/ipmi_powernv.c
@@ -250,8 +250,9 @@ static int ipmi_powernv_probe(struct platform_device *pdev)
 		ipmi->irq = opal_event_request(prop);
 	}
 
-	if (request_irq(ipmi->irq, ipmi_opal_event, IRQ_TYPE_LEVEL_HIGH,
-				"opal-ipmi", ipmi)) {
+	rc = request_irq(ipmi->irq, ipmi_opal_event, IRQ_TYPE_LEVEL_HIGH,
+			 "opal-ipmi", ipmi);
+	if (rc) {
 		dev_warn(dev, "Unable to request irq\n");
 		goto err_dispose;
 	}
-- 
2.15.1

[PATCH AUTOSEL for 4.15 059/189] mac80211_hwsim: fix possible memory leak in hwsim_new_radio_nl()

[Sasha Levin]

From: "weiyongjun (A)" <weiyongjun1@huawei.com>

[ Upstream commit 0ddcff49b672239dda94d70d0fcf50317a9f4b51 ]

'hwname' is malloced in hwsim_new_radio_nl() and should be freed
before leaving from the error handling cases, otherwise it will cause
memory leak.

Fixes: ff4dd73dd2b4 ("mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 731d59ee6efe..479250bca605 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -3155,8 +3155,10 @@ static int hwsim_new_radio_nl(struct sk_buff *msg, struct genl_info *info)
 	if (info->attrs[HWSIM_ATTR_REG_CUSTOM_REG]) {
 		u32 idx = nla_get_u32(info->attrs[HWSIM_ATTR_REG_CUSTOM_REG]);
 
-		if (idx >= ARRAY_SIZE(hwsim_world_regdom_custom))
+		if (idx >= ARRAY_SIZE(hwsim_world_regdom_custom)) {
+			kfree(hwname);
 			return -EINVAL;
+		}
 		param.regd = hwsim_world_regdom_custom[idx];
 	}
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 061/189] Btrfs: set plug for fsync

[Sasha Levin]

From: Liu Bo <bo.li.liu@oracle.com>

[ Upstream commit 343e4fc1c60971b0734de26dbbd475d433950982 ]

Setting plug can merge adjacent IOs before dispatching IOs to the disk
driver.

Without plug, it'd not be a problem for single disk usecases, but for
multiple disks using raid profile, a large IO can be split to several
IOs of stripe length, and plug can be helpful to bring them together
for each disk so that we can save several disk access.

Moreover, fsync issues synchronous writes, so plug can really take
effect.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/file.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index eb1bac7c8553..4368033593be 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2019,10 +2019,19 @@ int btrfs_release_file(struct inode *inode, struct file *filp)
 static int start_ordered_ops(struct inode *inode, loff_t start, loff_t end)
 {
 	int ret;
+	struct blk_plug plug;
 
+	/*
+	 * This is only called in fsync, which would do synchronous writes, so
+	 * a plug can merge adjacent IOs as much as possible.  Esp. in case of
+	 * multiple disks using raid profile, a large IO can be split to
+	 * several segments of stripe length (currently 64K).
+	 */
+	blk_start_plug(&plug);
 	atomic_inc(&BTRFS_I(inode)->sync_writers);
 	ret = btrfs_fdatawrite_range(inode, start, end);
 	atomic_dec(&BTRFS_I(inode)->sync_writers);
+	blk_finish_plug(&plug);
 
 	return ret;
 }
-- 
2.15.1

[PATCH AUTOSEL for 4.15 063/189] Btrfs: fix scrub to repair raid6 corruption

[Sasha Levin]

From: Liu Bo <bo.li.liu@oracle.com>

[ Upstream commit 762221f095e3932669093466aaf4b85ed9ad2ac1 ]

The raid6 corruption is that,
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,

- the 1st retry is to rebuild with all other stripes, it'll eventually
  be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
  that it will do raid6 style rebuild,

however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content.

We've fixed normal reads to rebuild raid6 correctly with more retries
in Patch "Btrfs: make raid6 rebuild retry more"[1], this is to fix
scrub to do the exactly same rebuild process.

[1]: https://patchwork.kernel.org/patch/10091755/

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/raid56.c  | 18 ++++++++++++++----
 fs/btrfs/volumes.c |  9 ++++++++-
 2 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c
index 8a3e42412506..025e69c57cbd 100644
--- a/fs/btrfs/raid56.c
+++ b/fs/btrfs/raid56.c
@@ -2170,11 +2170,21 @@ int raid56_parity_recover(struct btrfs_fs_info *fs_info, struct bio *bio,
 	}
 
 	/*
-	 * reconstruct from the q stripe if they are
-	 * asking for mirror 3
+	 * Loop retry:
+	 * for 'mirror == 2', reconstruct from all other stripes.
+	 * for 'mirror_num > 2', select a stripe to fail on every retry.
 	 */
-	if (mirror_num == 3)
-		rbio->failb = rbio->real_stripes - 2;
+	if (mirror_num > 2) {
+		/*
+		 * 'mirror == 3' is to fail the p stripe and
+		 * reconstruct from the q stripe.  'mirror > 3' is to
+		 * fail a data stripe and reconstruct from p+q stripe.
+		 */
+		rbio->failb = rbio->real_stripes - (mirror_num - 1);
+		ASSERT(rbio->failb > 0);
+		if (rbio->failb <= rbio->faila)
+			rbio->failb--;
+	}
 
 	ret = lock_stripe_add(rbio);
 
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 6631f48c6a11..82cdd9d74f04 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -5105,7 +5105,14 @@ int btrfs_num_copies(struct btrfs_fs_info *fs_info, u64 logical, u64 len)
 	else if (map->type & BTRFS_BLOCK_GROUP_RAID5)
 		ret = 2;
 	else if (map->type & BTRFS_BLOCK_GROUP_RAID6)
-		ret = 3;
+		/*
+		 * There could be two corrupted data stripes, we need
+		 * to loop retry in order to rebuild the correct data.
+		 * 
+		 * Fail a stripe at a time on every retry except the
+		 * stripe under reconstruction.
+		 */
+		ret = map->num_stripes;
 	else
 		ret = 1;
 	free_extent_map(em);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 062/189] btrfs: Fix out of bounds access in btrfs_search_slot

[Sasha Levin]

From: Nikolay Borisov <nborisov@suse.com>

[ Upstream commit 9ea2c7c9da13c9073e371c046cbbc45481ecb459 ]

When modifying a tree where the root is at BTRFS_MAX_LEVEL - 1 then
the level variable is going to be 7 (this is the max height of the
tree). On the other hand btrfs_cow_block is always called with
"level + 1" as an index into the nodes and slots arrays. This leads to
an out of bounds access. Admittdely this will be benign since an OOB
access of the nodes array will likely read the 0th element from the
slots array, which in this case is going to be 0 (since we start CoW at
the top of the tree). The OOB access into the slots array in turn will
read the 0th and 1st values of the locks array, which would both be 0
at the time. However, this benign behavior relies on the fact that the
path being passed hasn't been initialised, if it has already been used to
query a btree then it could potentially have populated the nodes/slots arrays.

Fix it by explicitly checking if we are at level 7 (the maximum allowed
index in nodes/slots arrays) and explicitly call the CoW routine with
NULL for parent's node/slot.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Fixes-coverity-id: 711515
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/ctree.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 1e74cf826532..5361f69433a3 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -2774,6 +2774,8 @@ again:
 		 * contention with the cow code
 		 */
 		if (cow) {
+			bool last_level = (level == (BTRFS_MAX_LEVEL - 1));
+
 			/*
 			 * if we don't really need to cow this block
 			 * then we don't want to set the path blocking,
@@ -2798,9 +2800,13 @@ again:
 			}
 
 			btrfs_set_path_blocking(p);
-			err = btrfs_cow_block(trans, root, b,
-					      p->nodes[level + 1],
-					      p->slots[level + 1], &b);
+			if (last_level)
+				err = btrfs_cow_block(trans, root, b, NULL, 0,
+						      &b);
+			else
+				err = btrfs_cow_block(trans, root, b,
+						      p->nodes[level + 1],
+						      p->slots[level + 1], &b);
 			if (err) {
 				ret = err;
 				goto done;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 064/189] btrfs: fail mount when sb flag is not in BTRFS_SUPER_FLAG_SUPP

[Sasha Levin]

From: Anand Jain <Anand.Jain@oracle.com>

[ Upstream commit 6f794e3c5c8f8fdd3b5bb20d9ded894e685b5bbe ]

It appears from the original commit [1] that there isn't any design
specific reason not to fail the mount instead of just warning. This
patch will change it to fail.

[1]
 commit 319e4d0661e5323c9f9945f0f8fb5905e5fe74c3
    btrfs: Enhance super validation check

Fixes: 319e4d0661e5323 ("btrfs: Enhance super validation check")
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/disk-io.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index a8ecccfc36de..3353d3de726a 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -3910,9 +3910,11 @@ static int btrfs_check_super_valid(struct btrfs_fs_info *fs_info)
 		btrfs_err(fs_info, "no valid FS found");
 		ret = -EINVAL;
 	}
-	if (btrfs_super_flags(sb) & ~BTRFS_SUPER_FLAG_SUPP)
-		btrfs_warn(fs_info, "unrecognized super flag: %llu",
+	if (btrfs_super_flags(sb) & ~BTRFS_SUPER_FLAG_SUPP) {
+		btrfs_err(fs_info, "unrecognized or unsupported super flag: %llu",
 				btrfs_super_flags(sb) & ~BTRFS_SUPER_FLAG_SUPP);
+		ret = -EINVAL;
+	}
 	if (btrfs_super_root_level(sb) >= BTRFS_MAX_LEVEL) {
 		btrfs_err(fs_info, "tree_root level too big: %d >= %d",
 				btrfs_super_root_level(sb), BTRFS_MAX_LEVEL);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 065/189] Btrfs: fix unexpected EEXIST from btrfs_get_extent

[Sasha Levin]

From: Liu Bo <bo.li.liu@oracle.com>

[ Upstream commit 18e83ac75bfe67009c4ddcdd581bba8eb16f4030 ]

This fixes a corner case that is caused by a race of dio write vs dio
read/write.

Here is how the race could happen.

Suppose that no extent map has been loaded into memory yet.
There is a file extent [0, 32K), two jobs are running concurrently
against it, t1 is doing dio write to [8K, 32K) and t2 is doing dio
read from [0, 4K) or [4K, 8K).

t1 goes ahead of t2 and splits em [0, 32K) to em [0K, 8K) and [8K 32K).

------------------------------------------------------
             t1                                t2
      btrfs_get_blocks_direct()         btrfs_get_blocks_direct()
       -> btrfs_get_extent()              -> btrfs_get_extent()
           -> lookup_extent_mapping()
           -> add_extent_mapping()            -> lookup_extent_mapping()
              # load [0, 32K)
       -> btrfs_new_extent_direct()
           -> btrfs_drop_extent_cache()
              # split [0, 32K) and
	      # drop [8K, 32K)
           -> add_extent_mapping()
              # add [8K, 32K)
                                              -> add_extent_mapping()
                                                 # handle -EEXIST when adding
                                                 # [0, 32K)
------------------------------------------------------
About how t2(dio read/write) runs into -EEXIST:

a) add_extent_mapping() gets -EEXIST for adding em [0, 32k),

b) search_extent_mapping() then returns [0, 8k) as the existing em,
   even though start == existing->start, em is [0, 32k) so that
   extent_map_end(em) > extent_map_end(existing), i.e. 32k > 8k,

c) then it goes thru merge_extent_mapping() which tries to add a [8k, 8k)
   (with a length 0) and returns -EEXIST as [8k, 32k) is already in tree,

d) so btrfs_get_extent() ends up returning -EEXIST to dio read/write,
   which is confusing applications.

Here I conclude all the possible situations,
1) start < existing->start

            +-----------+em+-----------+
+--prev---+ |     +-------------+      |
|         | |     |             |      |
+---------+ +     +---+existing++      ++
                +
                |
                +
             start

2) start == existing->start

      +------------em------------+
      |     +-------------+      |
      |     |             |      |
      +     +----existing-+      +
            |
            |
            +
         start

3) start > existing->start && start < (existing->start + existing->len)

      +------------em------------+
      |     +-------------+      |
      |     |             |      |
      +     +----existing-+      +
               |
               |
               +
             start

4) start >= (existing->start + existing->len)

+-----------+em+-----------+
|     +-------------+      | +--next---+
|     |             |      | |         |
+     +---+existing++      + +---------+
                      +
                      |
                      +
                   start

As we can see, it turns out that if start is within existing em (front
inclusive), then the existing em should be returned as is, otherwise,
we try our best to merge candidate em with sibling ems to form a
larger em (in order to reduce the total number of em).

Reported-by: David Vallender <david.vallender@landmark.co.uk>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/inode.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index c04183cc2117..90ae4e25ba3c 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -7180,19 +7180,12 @@ insert:
 		 * existing will always be non-NULL, since there must be
 		 * extent causing the -EEXIST.
 		 */
-		if (existing->start == em->start &&
-		    extent_map_end(existing) >= extent_map_end(em) &&
-		    em->block_start == existing->block_start) {
-			/*
-			 * The existing extent map already encompasses the
-			 * entire extent map we tried to add.
-			 */
+		if (start >= existing->start &&
+		    start < extent_map_end(existing)) {
 			free_extent_map(em);
 			em = existing;
 			err = 0;
-
-		} else if (start >= extent_map_end(existing) ||
-		    start <= existing->start) {
+		} else {
 			/*
 			 * The existing extent map is the one nearest to
 			 * the [start, start + len) range which overlaps
@@ -7204,10 +7197,6 @@ insert:
 				free_extent_map(em);
 				em = NULL;
 			}
-		} else {
-			free_extent_map(em);
-			em = existing;
-			err = 0;
 		}
 	}
 	write_unlock(&em_tree->lock);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 066/189] Btrfs: raid56: fix race between merge_bio and rbio_orig_end_io

[Sasha Levin]

From: Liu Bo <bo.li.liu@oracle.com>

[ Upstream commit 7583d8d088ff2c323b1d4f15b191ca2c23d32558 ]

Before rbio_orig_end_io() goes to free rbio, rbio may get merged with
more bios from other rbios and rbio->bio_list becomes non-empty,
in that case, these newly merged bios don't end properly.

Once unlock_stripe() is done, rbio->bio_list will not be updated any
more and we can call bio_endio() on all queued bios.

It should only happen in error-out cases, the normal path of recover
and full stripe write have already set RBIO_RMW_LOCKED_BIT to disable
merge before doing IO, so rbio_orig_end_io() called by them doesn't
have the above issue.

Reported-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/raid56.c | 37 +++++++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 12 deletions(-)

diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c
index 025e69c57cbd..19e12964aa6d 100644
--- a/fs/btrfs/raid56.c
+++ b/fs/btrfs/raid56.c
@@ -858,10 +858,17 @@ static void __free_raid_bio(struct btrfs_raid_bio *rbio)
 	kfree(rbio);
 }
 
-static void free_raid_bio(struct btrfs_raid_bio *rbio)
+static void rbio_endio_bio_list(struct bio *cur, blk_status_t err)
 {
-	unlock_stripe(rbio);
-	__free_raid_bio(rbio);
+	struct bio *next;
+
+	while (cur) {
+		next = cur->bi_next;
+		cur->bi_next = NULL;
+		cur->bi_status = err;
+		bio_endio(cur);
+		cur = next;
+	}
 }
 
 /*
@@ -871,20 +878,26 @@ static void free_raid_bio(struct btrfs_raid_bio *rbio)
 static void rbio_orig_end_io(struct btrfs_raid_bio *rbio, blk_status_t err)
 {
 	struct bio *cur = bio_list_get(&rbio->bio_list);
-	struct bio *next;
+	struct bio *extra;
 
 	if (rbio->generic_bio_cnt)
 		btrfs_bio_counter_sub(rbio->fs_info, rbio->generic_bio_cnt);
 
-	free_raid_bio(rbio);
+	/*
+	 * At this moment, rbio->bio_list is empty, however since rbio does not
+	 * always have RBIO_RMW_LOCKED_BIT set and rbio is still linked on the
+	 * hash list, rbio may be merged with others so that rbio->bio_list
+	 * becomes non-empty.
+	 * Once unlock_stripe() is done, rbio->bio_list will not be updated any
+	 * more and we can call bio_endio() on all queued bios.
+	 */
+	unlock_stripe(rbio);
+	extra = bio_list_get(&rbio->bio_list);
+	__free_raid_bio(rbio);
 
-	while (cur) {
-		next = cur->bi_next;
-		cur->bi_next = NULL;
-		cur->bi_status = err;
-		bio_endio(cur);
-		cur = next;
-	}
+	rbio_endio_bio_list(cur, err);
+	if (extra)
+		rbio_endio_bio_list(extra, err);
 }
 
 /*
-- 
2.15.1

[PATCH AUTOSEL for 4.15 067/189] RDMA/cma: Check existence of netdevice during port validation

[Sasha Levin]

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit 00db63c128dd3daf38f481371976c24d32678142 ]

If valid netdevice is not found for RoCE, GID table should not be
searched with NULL netdevice.

Doing so causes the search routines to ignore the netdev argument and may
match the wrong GID table entry if the netdev is deleted.

Fixes: abae1b71dd37 ("IB/cma: cma_validate_port should verify the port and netdevice")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/cma.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 67aece2f5d8d..6958df862591 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -624,11 +624,13 @@ static inline int cma_validate_port(struct ib_device *device, u8 port,
 	if ((dev_type != ARPHRD_INFINIBAND) && rdma_protocol_ib(device, port))
 		return ret;
 
-	if (dev_type == ARPHRD_ETHER && rdma_protocol_roce(device, port))
+	if (dev_type == ARPHRD_ETHER && rdma_protocol_roce(device, port)) {
 		ndev = dev_get_by_index(&init_net, bound_if_index);
-	else
+		if (!ndev)
+			return ret;
+	} else {
 		gid_type = IB_GID_TYPE_IB;
-
+	}
 
 	ret = ib_find_cached_gid_by_port(device, gid, gid_type, port,
 					 ndev, NULL);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 068/189] f2fs: avoid hungtask when GC encrypted block if io_bits is set

[Sasha Levin]

From: Sheng Yong <shengyong1@huawei.com>

[ Upstream commit a9d572c7550044d5b217b5287d99a2e6d34b97b0 ]

When io_bits is set, GCing encrypted block may hit the following hungtask.
Since io_bits requires aligned block address, f2fs_submit_page_write may
return -EAGAIN if new_blkaddr does not satisify io_bits alignment. As a
result, the encrypted page will never be writtenback.

This patch makes move_data_block aware the EAGAIN error and cancel the
writeback.

[  246.751371] INFO: task kworker/u4:4:797 blocked for more than 90 seconds.
[  246.752423]       Not tainted 4.15.0-rc4+ #11
[  246.754176] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  246.755336] kworker/u4:4    D25448   797      2 0x80000000
[  246.755597] Workqueue: writeback wb_workfn (flush-7:0)
[  246.755616] Call Trace:
[  246.755695]  ? __schedule+0x322/0xa90
[  246.755761]  ? blk_init_request_from_bio+0x120/0x120
[  246.755773]  ? pci_mmcfg_check_reserved+0xb0/0xb0
[  246.755801]  ? __radix_tree_create+0x19e/0x200
[  246.755813]  ? delete_node+0x136/0x370
[  246.755838]  schedule+0x43/0xc0
[  246.755904]  io_schedule+0x17/0x40
[  246.755939]  wait_on_page_bit_common+0x17b/0x240
[  246.755950]  ? wake_page_function+0xa0/0xa0
[  246.755961]  ? add_to_page_cache_lru+0x160/0x160
[  246.755972]  ? page_cache_tree_insert+0x170/0x170
[  246.755983]  ? __lru_cache_add+0x96/0xb0
[  246.756086]  __filemap_fdatawait_range+0x14f/0x1c0
[  246.756097]  ? wait_on_page_bit_common+0x240/0x240
[  246.756120]  ? __wake_up_locked_key_bookmark+0x20/0x20
[  246.756167]  ? wait_on_all_pages_writeback+0xc9/0x100
[  246.756179]  ? __remove_ino_entry+0x120/0x120
[  246.756192]  ? wait_woken+0x100/0x100
[  246.756204]  filemap_fdatawait_range+0x9/0x20
[  246.756216]  write_checkpoint+0x18a1/0x1f00
[  246.756254]  ? blk_get_request+0x10/0x10
[  246.756265]  ? cpumask_next_and+0x43/0x60
[  246.756279]  ? f2fs_sync_inode_meta+0x160/0x160
[  246.756289]  ? remove_element.isra.4+0xa0/0xa0
[  246.756300]  ? __put_compound_page+0x40/0x40
[  246.756310]  ? f2fs_sync_fs+0xec/0x1c0
[  246.756320]  ? f2fs_sync_fs+0x120/0x1c0
[  246.756329]  f2fs_sync_fs+0x120/0x1c0
[  246.756357]  ? trace_event_raw_event_f2fs__page+0x260/0x260
[  246.756393]  ? ata_build_rw_tf+0x173/0x410
[  246.756397]  f2fs_balance_fs_bg+0x198/0x390
[  246.756405]  ? drop_inmem_page+0x230/0x230
[  246.756415]  ? ahci_qc_prep+0x1bb/0x2e0
[  246.756418]  ? ahci_qc_issue+0x1df/0x290
[  246.756422]  ? __accumulate_pelt_segments+0x42/0xd0
[  246.756426]  ? f2fs_write_node_pages+0xd1/0x380
[  246.756429]  f2fs_write_node_pages+0xd1/0x380
[  246.756437]  ? sync_node_pages+0x8f0/0x8f0
[  246.756440]  ? update_curr+0x53/0x220
[  246.756444]  ? __accumulate_pelt_segments+0xa2/0xd0
[  246.756448]  ? __update_load_avg_se.isra.39+0x349/0x360
[  246.756452]  ? do_writepages+0x2a/0xa0
[  246.756456]  do_writepages+0x2a/0xa0
[  246.756460]  __writeback_single_inode+0x70/0x490
[  246.756463]  ? check_preempt_wakeup+0x199/0x310
[  246.756467]  writeback_sb_inodes+0x2a2/0x660
[  246.756471]  ? is_empty_dir_inode+0x40/0x40
[  246.756474]  ? __writeback_single_inode+0x490/0x490
[  246.756477]  ? string+0xbf/0xf0
[  246.756480]  ? down_read_trylock+0x35/0x60
[  246.756484]  __writeback_inodes_wb+0x9f/0xf0
[  246.756488]  wb_writeback+0x41d/0x4b0
[  246.756492]  ? writeback_inodes_wb.constprop.55+0x150/0x150
[  246.756498]  ? set_worker_desc+0xf7/0x130
[  246.756502]  ? current_is_workqueue_rescuer+0x60/0x60
[  246.756511]  ? _find_next_bit+0x2c/0xa0
[  246.756514]  ? wb_workfn+0x400/0x5d0
[  246.756518]  wb_workfn+0x400/0x5d0
[  246.756521]  ? finish_task_switch+0xdf/0x2a0
[  246.756525]  ? inode_wait_for_writeback+0x30/0x30
[  246.756529]  process_one_work+0x3a7/0x6f0
[  246.756533]  worker_thread+0x82/0x750
[  246.756537]  kthread+0x16f/0x1c0
[  246.756541]  ? trace_event_raw_event_workqueue_work+0x110/0x110
[  246.756544]  ? kthread_create_worker_on_cpu+0xb0/0xb0
[  246.756548]  ret_from_fork+0x1f/0x30

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/f2fs/gc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index d844dcb80570..bab49a270401 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -686,7 +686,12 @@ static void move_data_block(struct inode *inode, block_t bidx,
 	fio.op = REQ_OP_WRITE;
 	fio.op_flags = REQ_SYNC;
 	fio.new_blkaddr = newaddr;
-	f2fs_submit_page_write(&fio);
+	err = f2fs_submit_page_write(&fio);
+	if (err) {
+		if (PageWriteback(fio.encrypted_page))
+			end_page_writeback(fio.encrypted_page);
+		goto put_page_out;
+	}
 
 	f2fs_update_iostat(fio.sbi, FS_GC_DATA_IO, F2FS_BLKSIZE);
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 069/189] f2fs: fix to update last_disk_size correctly

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit eb4497975e82448746bb7de3d13b743b7145aed7 ]

This patch fixes to update last_disk_size only when writing out page
successfully.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/f2fs/data.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 516fa0d3ff9c..3399ddb723dd 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1571,10 +1571,14 @@ write:
 		}
 	}
 
-	down_write(&F2FS_I(inode)->i_sem);
-	if (F2FS_I(inode)->last_disk_size < psize)
-		F2FS_I(inode)->last_disk_size = psize;
-	up_write(&F2FS_I(inode)->i_sem);
+	if (err) {
+		file_set_keep_isize(inode);
+	} else {
+		down_write(&F2FS_I(inode)->i_sem);
+		if (F2FS_I(inode)->last_disk_size < psize)
+			F2FS_I(inode)->last_disk_size = psize;
+		up_write(&F2FS_I(inode)->i_sem);
+	}
 
 done:
 	if (err && err != -ENOENT)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 070/189] scsi: devinfo: fix format of the device list

[Sasha Levin]

From: Xose Vazquez Perez <xose.vazquez@gmail.com>

[ Upstream commit 3f884a0a8bdf28cfd1e9987d54d83350096cdd46 ]

Replace "" with NULL for product revision level, and merge TEXEL
duplicate entries.

Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/scsi_devinfo.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 0a17b9e5dc35..6d976db33d9f 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -108,8 +108,8 @@ static struct {
 	 * seagate controller, which causes SCSI code to reset bus.
 	 */
 	{"HP", "C1750A", "3226", BLIST_NOLUN},		/* scanjet iic */
-	{"HP", "C1790A", "", BLIST_NOLUN},		/* scanjet iip */
-	{"HP", "C2500A", "", BLIST_NOLUN},		/* scanjet iicx */
+	{"HP", "C1790A", NULL, BLIST_NOLUN},		/* scanjet iip */
+	{"HP", "C2500A", NULL, BLIST_NOLUN},		/* scanjet iicx */
 	{"MEDIAVIS", "CDR-H93MV", "1.31", BLIST_NOLUN},	/* locks up */
 	{"MICROTEK", "ScanMaker II", "5.61", BLIST_NOLUN},	/* responds to all lun */
 	{"MITSUMI", "CD-R CR-2201CS", "6119", BLIST_NOLUN},	/* locks up */
@@ -119,7 +119,7 @@ static struct {
 	{"QUANTUM", "FIREBALL ST4.3S", "0F0C", BLIST_NOLUN},	/* locks up */
 	{"RELISYS", "Scorpio", NULL, BLIST_NOLUN},	/* responds to all lun */
 	{"SANKYO", "CP525", "6.64", BLIST_NOLUN},	/* causes failed REQ SENSE, extra reset */
-	{"TEXEL", "CD-ROM", "1.06", BLIST_NOLUN},
+	{"TEXEL", "CD-ROM", "1.06", BLIST_NOLUN | BLIST_BORKEN},
 	{"transtec", "T5008", "0001", BLIST_NOREPORTLUN },
 	{"YAMAHA", "CDR100", "1.00", BLIST_NOLUN},	/* locks up */
 	{"YAMAHA", "CDR102", "1.00", BLIST_NOLUN},	/* locks up */
@@ -255,7 +255,6 @@ static struct {
 	{"ST650211", "CF", NULL, BLIST_RETRY_HWERROR},
 	{"SUN", "T300", "*", BLIST_SPARSELUN},
 	{"SUN", "T4", "*", BLIST_SPARSELUN},
-	{"TEXEL", "CD-ROM", "1.06", BLIST_BORKEN},
 	{"Tornado-", "F4", "*", BLIST_NOREPORTLUN},
 	{"TOSHIBA", "CDROM", NULL, BLIST_ISROM},
 	{"TOSHIBA", "CD-ROM", NULL, BLIST_ISROM},
-- 
2.15.1

[PATCH AUTOSEL for 4.15 071/189] scsi: fas216: fix sense buffer initialization

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 96d5eaa9bb74d299508d811d865c2c41b38b0301 ]

While testing with the ARM specific memset() macro removed, I ran into a
compiler warning that shows an old bug:

drivers/scsi/arm/fas216.c: In function 'fas216_rq_sns_done':
drivers/scsi/arm/fas216.c:2014:40: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess]

It turns out that the definition of the scsi_cmd structure changed back
in linux-2.6.25, so now we clear only four bytes (sizeof(pointer))
instead of 96 (SCSI_SENSE_BUFFERSIZE). I did not check whether we
actually need to initialize the buffer here, but it's clear that if we
do it, we should use the correct size.

Fixes: de25deb18016 ("[SCSI] use dynamically allocated sense buffer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/arm/fas216.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index f4775ca70bab..27bda2b05de6 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2011,7 +2011,7 @@ static void fas216_rq_sns_done(FAS216_Info *info, struct scsi_cmnd *SCpnt,
 		 * have valid data in the sense buffer that could
 		 * confuse the higher levels.
 		 */
-		memset(SCpnt->sense_buffer, 0, sizeof(SCpnt->sense_buffer));
+		memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
 //printk("scsi%d.%c: sense buffer: ", info->host->host_no, '0' + SCpnt->device->id);
 //{ int i; for (i = 0; i < 32; i++) printk("%02x ", SCpnt->sense_buffer[i]); printk("\n"); }
 	/*
-- 
2.15.1

[PATCH AUTOSEL for 4.15 072/189] Input: stmfts - set IRQ_NOAUTOEN to the irq flag

[Sasha Levin]

From: Andi Shyti <andi.shyti@samsung.com>

[ Upstream commit cba04cdf437d745fac85220d1d692a9ae23d7004 ]

The interrupt is requested before the device is powered on and
it's value in some cases cannot be reliable. It happens on some
devices that an interrupt is generated as soon as requested
before having the chance to disable the irq.

Set the irq flag as IRQ_NOAUTOEN before requesting it.

This patch mutes the error:

  stmfts 2-0049: failed to read events: -11

received sometimes during boot time.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/input/touchscreen/stmfts.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index 2a123e20a42e..efdb1a75a163 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -682,6 +682,14 @@ static int stmfts_probe(struct i2c_client *client,
 
 	input_set_drvdata(sdata->input, sdata);
 
+	/*
+	 * stmfts_power_on expects interrupt to be disabled, but
+	 * at this point the device is still off and I do not trust
+	 * the status of the irq line that can generate some spurious
+	 * interrupts. To be on the safe side it's better to not enable
+	 * the interrupts during their request.
+	 */
+	irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
 	err = devm_request_threaded_irq(&client->dev, client->irq,
 					NULL, stmfts_irq_handler,
 					IRQF_ONESHOT,
@@ -689,9 +697,6 @@ static int stmfts_probe(struct i2c_client *client,
 	if (err)
 		return err;
 
-	/* stmfts_power_on expects interrupt to be disabled */
-	disable_irq(client->irq);
-
 	dev_dbg(&client->dev, "initializing ST-Microelectronics FTS...\n");
 
 	err = stmfts_power_on(sdata);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 073/189] HID: roccat: prevent an out of bounds read in kovaplus_profile_activated()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 7ad81482cad67cbe1ec808490d1ddfc420c42008 ]

We get the "new_profile_index" value from the mouse device when we're
handling raw events.  Smatch taints it as untrusted data and complains
that we need a bounds check.  This seems like a reasonable warning
otherwise there is a small read beyond the end of the array.

Fixes: 0e70f97f257e ("HID: roccat: Add support for Kova[+] mouse")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/hid/hid-roccat-kovaplus.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hid/hid-roccat-kovaplus.c b/drivers/hid/hid-roccat-kovaplus.c
index 43617fb28b87..317c9c2c0a7c 100644
--- a/drivers/hid/hid-roccat-kovaplus.c
+++ b/drivers/hid/hid-roccat-kovaplus.c
@@ -37,6 +37,8 @@ static uint kovaplus_convert_event_cpi(uint value)
 static void kovaplus_profile_activated(struct kovaplus_device *kovaplus,
 		uint new_profile_index)
 {
+	if (new_profile_index >= ARRAY_SIZE(kovaplus->profile_settings))
+		return;
 	kovaplus->actual_profile = new_profile_index;
 	kovaplus->actual_cpi = kovaplus->profile_settings[new_profile_index].cpi_startup_level;
 	kovaplus->actual_x_sensitivity = kovaplus->profile_settings[new_profile_index].sensitivity_x;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 074/189] nfp: fix error return code in nfp_pci_probe()

[Sasha Levin]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit e58decc9c51eb61697aba35ba8eda33f4b80552d ]

Fix to return error code -EINVAL instead of 0 when num_vfs above
limit_vfs, as done elsewhere in this function.

Fixes: 0dc786219186 ("nfp: handle SR-IOV already enabled when driver is probing")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/netronome/nfp/nfp_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/netronome/nfp/nfp_main.c b/drivers/net/ethernet/netronome/nfp/nfp_main.c
index 35eaccbece36..2222577bdcf3 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_main.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_main.c
@@ -518,6 +518,7 @@ static int nfp_pci_probe(struct pci_dev *pdev,
 		dev_err(&pdev->dev,
 			"Error: %d VFs already enabled, but loaded FW can only support %d\n",
 			pf->num_vfs, pf->limit_vfs);
+		err = -EINVAL;
 		goto err_fw_unload;
 	}
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 076/189] selftests/bpf: fix test_dev_cgroup

[Sasha Levin]

From: Alexei Starovoitov <ast@kernel.org>

[ Upstream commit 8e6875250a1189e0d8db8b05e18abe63c2744521 ]

The test incorrectly doing
mkdir /mnt/cgroup-test-work-dirtest-bpf-based-device-cgroup
instead of
mkdir /mnt/cgroup-test-work-dir/test-bpf-based-device-cgroup

somehow such mkdir succeeds and new directory appears:
/mnt/cgroup-test-work-dir/cgroup-test-work-dirtest-bpf-based-device-cgroup

Later cleanup via nftw("/mnt/cgroup-test-work-dir", ...);
doesn't walk this directory.
"rmdir /mnt/cgroup-test-work-dir" succeeds, but bpf program and
dangling cgroup stays in memory.
That's a separate issue on a cgroup side.
For now fix the test.

Fixes: 37f1ba0909df ("selftests/bpf: add a test for device cgroup controller")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/testing/selftests/bpf/test_dev_cgroup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/test_dev_cgroup.c b/tools/testing/selftests/bpf/test_dev_cgroup.c
index 02c85d6c89b0..070bc3c9a873 100644
--- a/tools/testing/selftests/bpf/test_dev_cgroup.c
+++ b/tools/testing/selftests/bpf/test_dev_cgroup.c
@@ -19,7 +19,7 @@
 
 #define DEV_CGROUP_PROG "./dev_cgroup.o"
 
-#define TEST_CGROUP "test-bpf-based-device-cgroup/"
+#define TEST_CGROUP "/test-bpf-based-device-cgroup/"
 
 int main(int argc, char **argv)
 {
-- 
2.15.1

[PATCH AUTOSEL for 4.15 075/189] block: Set BIO_TRACE_COMPLETION on new bio during split

[Sasha Levin]

From: Goldwyn Rodrigues <rgoldwyn@suse.com>

[ Upstream commit 20d59023c5ec4426284af492808bcea1f39787ef ]

We inadvertently set it again on the source bio, but we need
to set it on the new split bio instead.

Fixes: fbbaf700e7b1 ("block: trace completion of all bios.")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 block/bio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/bio.c b/block/bio.c
index 9ef6cf3addb3..7d38b769fde2 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -1838,7 +1838,7 @@ struct bio *bio_split(struct bio *bio, int sectors,
 	bio_advance(bio, split->bi_iter.bi_size);
 
 	if (bio_flagged(bio, BIO_TRACE_COMPLETION))
-		bio_set_flag(bio, BIO_TRACE_COMPLETION);
+		bio_set_flag(split, BIO_TRACE_COMPLETION);
 
 	return split;
 }
-- 
2.15.1

[PATCH AUTOSEL for 4.15 077/189] bpf: test_maps: cleanup sockmaps when test ends

[Sasha Levin]

From: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>

[ Upstream commit 783687810e986a15ffbf86c516a1a48ff37f38f7 ]

Bug: BPF programs and maps related to sockmaps test exist
in memory even after test_maps ends.

This patch fixes it as a short term workaround (sockmap
kernel side needs real fixing) by empyting sockmaps when
test ends.

Fixes: 6f6d33f3b3d0f ("bpf: selftests add sockmap tests")
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
[ daniel: Note on workaround. ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/testing/selftests/bpf/test_maps.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_maps.c b/tools/testing/selftests/bpf/test_maps.c
index 040356ecc862..5fb1355f80fc 100644
--- a/tools/testing/selftests/bpf/test_maps.c
+++ b/tools/testing/selftests/bpf/test_maps.c
@@ -463,7 +463,7 @@ static void test_devmap(int task, void *data)
 #define SOCKMAP_VERDICT_PROG "./sockmap_verdict_prog.o"
 static void test_sockmap(int tasks, void *data)
 {
-	int one = 1, map_fd_rx, map_fd_tx, map_fd_break, s, sc, rc;
+	int one = 1, map_fd_rx = 0, map_fd_tx = 0, map_fd_break, s, sc, rc;
 	struct bpf_map *bpf_map_rx, *bpf_map_tx, *bpf_map_break;
 	int ports[] = {50200, 50201, 50202, 50204};
 	int err, i, fd, udp, sfd[6] = {0xdeadbeef};
@@ -868,9 +868,12 @@ static void test_sockmap(int tasks, void *data)
 		goto out_sockmap;
 	}
 
-	/* Test map close sockets */
-	for (i = 0; i < 6; i++)
+	/* Test map close sockets and empty maps */
+	for (i = 0; i < 6; i++) {
+		bpf_map_delete_elem(map_fd_tx, &i);
+		bpf_map_delete_elem(map_fd_rx, &i);
 		close(sfd[i]);
+	}
 	close(fd);
 	close(map_fd_rx);
 	bpf_object__close(obj);
@@ -881,8 +884,13 @@ out:
 	printf("Failed to create sockmap '%i:%s'!\n", i, strerror(errno));
 	exit(1);
 out_sockmap:
-	for (i = 0; i < 6; i++)
+	for (i = 0; i < 6; i++) {
+		if (map_fd_tx)
+			bpf_map_delete_elem(map_fd_tx, &i);
+		if (map_fd_rx)
+			bpf_map_delete_elem(map_fd_rx, &i);
 		close(sfd[i]);
+	}
 	close(fd);
 	exit(1);
 }
-- 
2.15.1

[PATCH AUTOSEL for 4.15 078/189] i40evf: Don't schedule reset_task when device is being removed

[Sasha Levin]

From: Avinash Dayanand <avinash.dayanand@intel.com>

[ Upstream commit 06aa040f039404a0039a5158cd12f41187487a1f ]

When a host disables and enables a PF device, all the associated
VFs are removed and added back in. It also generates a PFR which in turn
resets all the connected VFs. This behaviour is different from that of
Linux guest on Linux host. Hence we end up in a situation where there's
a PFR and device removal at the same time. And watchdog doesn't have a
clue about this and schedules a reset_task. This patch adds code to send
signal to reset_task that the device is currently being removed.

Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/i40evf/i40evf.h      | 1 +
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 9 ++++++++-
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index de0af521d602..ecf752cb8772 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -187,6 +187,7 @@ enum i40evf_state_t {
 enum i40evf_critical_section_t {
 	__I40EVF_IN_CRITICAL_TASK,	/* cannot be interrupted */
 	__I40EVF_IN_CLIENT_TASK,
+	__I40EVF_IN_REMOVE_TASK,	/* device being removed */
 };
 
 /* board specific private data structure */
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 7b2a4eba92e2..1fe466c7849a 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1855,6 +1855,12 @@ static void i40evf_reset_task(struct work_struct *work)
 	u32 reg_val;
 	int i = 0, err;
 
+	/* When device is being removed it doesn't make sense to run the reset
+	 * task, just return in such a case.
+	 */
+	if (test_bit(__I40EVF_IN_REMOVE_TASK, &adapter->crit_section))
+		return;
+
 	while (test_and_set_bit(__I40EVF_IN_CLIENT_TASK,
 				&adapter->crit_section))
 		usleep_range(500, 1000);
@@ -3066,7 +3072,8 @@ static void i40evf_remove(struct pci_dev *pdev)
 	struct i40evf_mac_filter *f, *ftmp;
 	struct i40e_hw *hw = &adapter->hw;
 	int err;
-
+	/* Indicate we are in remove and not to run reset_task */
+	set_bit(__I40EVF_IN_REMOVE_TASK, &adapter->crit_section);
 	cancel_delayed_work_sync(&adapter->init_task);
 	cancel_work_sync(&adapter->reset_task);
 	cancel_delayed_work_sync(&adapter->client_task);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 079/189] i40evf: ignore link up if not running

[Sasha Levin]

From: Alan Brady <alan.brady@intel.com>

[ Upstream commit e0346f9fcb6c636d2f870e6666de8781413f34ea ]

If we receive the link status message from PF with link up before queues
are actually enabled, it will trigger a TX hang.  This fixes the issue
by ignoring a link up message if the VF state is not yet in RUNNING
state.

Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 .../net/ethernet/intel/i40evf/i40evf_virtchnl.c    | 35 ++++++++++++++--------
 1 file changed, 23 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
index 46c8b8a3907c..23635f5a2388 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
@@ -965,23 +965,34 @@ void i40evf_virtchnl_completion(struct i40evf_adapter *adapter,
 	if (v_opcode == VIRTCHNL_OP_EVENT) {
 		struct virtchnl_pf_event *vpe =
 			(struct virtchnl_pf_event *)msg;
+		bool link_up = vpe->event_data.link_event.link_status;
 		switch (vpe->event) {
 		case VIRTCHNL_EVENT_LINK_CHANGE:
 			adapter->link_speed =
 				vpe->event_data.link_event.link_speed;
-			if (adapter->link_up !=
-			    vpe->event_data.link_event.link_status) {
-				adapter->link_up =
-					vpe->event_data.link_event.link_status;
-				if (adapter->link_up) {
-					netif_tx_start_all_queues(netdev);
-					netif_carrier_on(netdev);
-				} else {
-					netif_tx_stop_all_queues(netdev);
-					netif_carrier_off(netdev);
-				}
-				i40evf_print_link_message(adapter);
+
+			/* we've already got the right link status, bail */
+			if (adapter->link_up == link_up)
+				break;
+
+			/* If we get link up message and start queues before
+			 * our queues are configured it will trigger a TX hang.
+			 * In that case, just ignore the link status message,
+			 * we'll get another one after we enable queues and
+			 * actually prepared to send traffic.
+			 */
+			if (link_up && adapter->state != __I40EVF_RUNNING)
+				break;
+
+			adapter->link_up = link_up;
+			if (link_up) {
+				netif_tx_start_all_queues(netdev);
+				netif_carrier_on(netdev);
+			} else {
+				netif_tx_stop_all_queues(netdev);
+				netif_carrier_off(netdev);
 			}
+			i40evf_print_link_message(adapter);
 			break;
 		case VIRTCHNL_EVENT_RESET_IMPENDING:
 			dev_info(&adapter->pdev->dev, "PF reset warning received\n");
-- 
2.15.1

[PATCH AUTOSEL for 4.15 080/189] i40e: Fix channel addition in reset flow

[Sasha Levin]

From: Amritha Nambiar <amritha.nambiar@intel.com>

[ Upstream commit bbf0bdd41fbf71a008325bdcf0df63ab088bf532 ]

Fix recreating the channel VSIs during the reset flow to reconfigure
the Tx rings and the queue context associated with the channel VSI.
Also update the next_base_queue for the VSI while rebuilding the
channel VSIs after a reset.

Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index af792112a2d3..973bad818e81 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -9077,6 +9077,17 @@ static int i40e_rebuild_channels(struct i40e_vsi *vsi)
 				 vsi->uplink_seid);
 			return ret;
 		}
+		/* Reconfigure TX queues using QTX_CTL register */
+		ret = i40e_channel_config_tx_ring(vsi->back, vsi, ch);
+		if (ret) {
+			dev_info(&vsi->back->pdev->dev,
+				 "failed to configure TX rings for channel %u\n",
+				 ch->seid);
+			return ret;
+		}
+		/* update 'next_base_queue' */
+		vsi->next_base_queue = vsi->next_base_queue +
+							ch->num_queue_pairs;
 		if (ch->max_tx_rate) {
 			u64 credits = ch->max_tx_rate;
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 081/189] platform/x86: thinkpad_acpi: suppress warning about palm detection

[Sasha Levin]

From: David Herrmann <dh.herrmann@gmail.com>

[ Upstream commit 587d8628fb71c3bfae29fb2bbe84c1478c59bac8 ]

This patch prevents the thinkpad_acpi driver from warning about 2 event
codes returned for keyboard palm-detection. No behavioral changes,
other than suppressing the warning in the kernel log. The events are
still forwarded via acpi-netlink channels.

We could, optionally, decide to forward the event through a
input-switch on the tpacpi input device. However, so far no suitable
input-code exists, and no similar drivers report such events. Hence,
leave it an acpi event for now.

Note that the event-codes are named based on empirical studies. On the
ThinkPad X1 5th Gen the sensor can be found underneath the arrow key.

Cc: Matthew Thode <mthode@mthode.org>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/platform/x86/thinkpad_acpi.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 117be48ff4de..128f91af716e 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -214,6 +214,10 @@ enum tpacpi_hkey_event_t {
 	/* AC-related events */
 	TP_HKEY_EV_AC_CHANGED		= 0x6040, /* AC status changed */
 
+	/* Further user-interface events */
+	TP_HKEY_EV_PALM_DETECTED	= 0x60b0, /* palm hoveres keyboard */
+	TP_HKEY_EV_PALM_UNDETECTED	= 0x60b1, /* palm removed */
+
 	/* Misc */
 	TP_HKEY_EV_RFKILL_CHANGED	= 0x7000, /* rfkill switch changed */
 };
@@ -4079,6 +4083,12 @@ static bool hotkey_notify_6xxx(const u32 hkey,
 		*send_acpi_ev = false;
 		break;
 
+	case TP_HKEY_EV_PALM_DETECTED:
+	case TP_HKEY_EV_PALM_UNDETECTED:
+		/* palm detected hovering the keyboard, forward to user-space
+		 * via netlink for consumption */
+		return true;
+
 	default:
 		pr_warn("unknown possible thermal alarm or keyboard event received\n");
 		known = false;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 082/189] KVM: s390: vsie: use READ_ONCE to access some SCB fields

[Sasha Levin]

From: David Hildenbrand <david@redhat.com>

[ Upstream commit b3ecd4aa8632a86428605ab73393d14779019d82 ]

Another VCPU might try to modify the SCB while we are creating the
shadow SCB. In general this is no problem - unless the compiler decides
to not load values once, but e.g. twice.

For us, this is only relevant when checking/working with such values.
E.g. the prefix value, the mso, state of transactional execution and
addresses of satellite blocks.

E.g. if we blindly forward values (e.g. general purpose registers or
execution controls after masking), we don't care.

Leaving unpin_blocks() untouched for now, will handle it separately.

The worst thing right now that I can see would be a missed prefix
un/remap (mso, prefix, tx) or using wrong guest addresses. Nothing
critical, but let's try to avoid unpredictable behavior.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180116171526.12343-2-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/s390/kvm/vsie.c | 50 +++++++++++++++++++++++++++++++-------------------
 1 file changed, 31 insertions(+), 19 deletions(-)

diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
index 751348348477..11fc525e6e7f 100644
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -28,7 +28,11 @@ struct vsie_page {
 	 * the same offset as that in struct sie_page!
 	 */
 	struct mcck_volatile_info mcck_info;    /* 0x0200 */
-	/* the pinned originial scb */
+	/*
+	 * The pinned original scb. Be aware that other VCPUs can modify
+	 * it while we read from it. Values that are used for conditions or
+	 * are reused conditionally, should be accessed via READ_ONCE.
+	 */
 	struct kvm_s390_sie_block *scb_o;	/* 0x0218 */
 	/* the shadow gmap in use by the vsie_page */
 	struct gmap *gmap;			/* 0x0220 */
@@ -140,12 +144,13 @@ static int shadow_crycb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 {
 	struct kvm_s390_sie_block *scb_s = &vsie_page->scb_s;
 	struct kvm_s390_sie_block *scb_o = vsie_page->scb_o;
-	u32 crycb_addr = scb_o->crycbd & 0x7ffffff8U;
+	const uint32_t crycbd_o = READ_ONCE(scb_o->crycbd);
+	const u32 crycb_addr = crycbd_o & 0x7ffffff8U;
 	unsigned long *b1, *b2;
 	u8 ecb3_flags;
 
 	scb_s->crycbd = 0;
-	if (!(scb_o->crycbd & vcpu->arch.sie_block->crycbd & CRYCB_FORMAT1))
+	if (!(crycbd_o & vcpu->arch.sie_block->crycbd & CRYCB_FORMAT1))
 		return 0;
 	/* format-1 is supported with message-security-assist extension 3 */
 	if (!test_kvm_facility(vcpu->kvm, 76))
@@ -183,12 +188,15 @@ static void prepare_ibc(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 {
 	struct kvm_s390_sie_block *scb_s = &vsie_page->scb_s;
 	struct kvm_s390_sie_block *scb_o = vsie_page->scb_o;
+	/* READ_ONCE does not work on bitfields - use a temporary variable */
+	const uint32_t __new_ibc = scb_o->ibc;
+	const uint32_t new_ibc = READ_ONCE(__new_ibc) & 0x0fffU;
 	__u64 min_ibc = (sclp.ibc >> 16) & 0x0fffU;
 
 	scb_s->ibc = 0;
 	/* ibc installed in g2 and requested for g3 */
-	if (vcpu->kvm->arch.model.ibc && (scb_o->ibc & 0x0fffU)) {
-		scb_s->ibc = scb_o->ibc & 0x0fffU;
+	if (vcpu->kvm->arch.model.ibc && new_ibc) {
+		scb_s->ibc = new_ibc;
 		/* takte care of the minimum ibc level of the machine */
 		if (scb_s->ibc < min_ibc)
 			scb_s->ibc = min_ibc;
@@ -259,6 +267,10 @@ static int shadow_scb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 {
 	struct kvm_s390_sie_block *scb_o = vsie_page->scb_o;
 	struct kvm_s390_sie_block *scb_s = &vsie_page->scb_s;
+	/* READ_ONCE does not work on bitfields - use a temporary variable */
+	const uint32_t __new_prefix = scb_o->prefix;
+	const uint32_t new_prefix = READ_ONCE(__new_prefix);
+	const bool wants_tx = READ_ONCE(scb_o->ecb) & ECB_TE;
 	bool had_tx = scb_s->ecb & ECB_TE;
 	unsigned long new_mso = 0;
 	int rc;
@@ -306,14 +318,14 @@ static int shadow_scb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 	scb_s->icpua = scb_o->icpua;
 
 	if (!(atomic_read(&scb_s->cpuflags) & CPUSTAT_SM))
-		new_mso = scb_o->mso & 0xfffffffffff00000UL;
+		new_mso = READ_ONCE(scb_o->mso) & 0xfffffffffff00000UL;
 	/* if the hva of the prefix changes, we have to remap the prefix */
-	if (scb_s->mso != new_mso || scb_s->prefix != scb_o->prefix)
+	if (scb_s->mso != new_mso || scb_s->prefix != new_prefix)
 		prefix_unmapped(vsie_page);
 	 /* SIE will do mso/msl validity and exception checks for us */
 	scb_s->msl = scb_o->msl & 0xfffffffffff00000UL;
 	scb_s->mso = new_mso;
-	scb_s->prefix = scb_o->prefix;
+	scb_s->prefix = new_prefix;
 
 	/* We have to definetly flush the tlb if this scb never ran */
 	if (scb_s->ihcpu != 0xffffU)
@@ -325,11 +337,11 @@ static int shadow_scb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 	if (test_kvm_cpu_feat(vcpu->kvm, KVM_S390_VM_CPU_FEAT_ESOP))
 		scb_s->ecb |= scb_o->ecb & ECB_HOSTPROTINT;
 	/* transactional execution */
-	if (test_kvm_facility(vcpu->kvm, 73)) {
+	if (test_kvm_facility(vcpu->kvm, 73) && wants_tx) {
 		/* remap the prefix is tx is toggled on */
-		if ((scb_o->ecb & ECB_TE) && !had_tx)
+		if (!had_tx)
 			prefix_unmapped(vsie_page);
-		scb_s->ecb |= scb_o->ecb & ECB_TE;
+		scb_s->ecb |= ECB_TE;
 	}
 	/* branch prediction */
 	if (test_kvm_facility(vcpu->kvm, 82))
@@ -539,9 +551,9 @@ static int pin_blocks(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 	gpa_t gpa;
 	int rc = 0;
 
-	gpa = scb_o->scaol & ~0xfUL;
+	gpa = READ_ONCE(scb_o->scaol) & ~0xfUL;
 	if (test_kvm_cpu_feat(vcpu->kvm, KVM_S390_VM_CPU_FEAT_64BSCAO))
-		gpa |= (u64) scb_o->scaoh << 32;
+		gpa |= (u64) READ_ONCE(scb_o->scaoh) << 32;
 	if (gpa) {
 		if (!(gpa & ~0x1fffUL))
 			rc = set_validity_icpt(scb_s, 0x0038U);
@@ -561,7 +573,7 @@ static int pin_blocks(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 		scb_s->scaol = (u32)(u64)hpa;
 	}
 
-	gpa = scb_o->itdba & ~0xffUL;
+	gpa = READ_ONCE(scb_o->itdba) & ~0xffUL;
 	if (gpa && (scb_s->ecb & ECB_TE)) {
 		if (!(gpa & ~0x1fffU)) {
 			rc = set_validity_icpt(scb_s, 0x0080U);
@@ -576,7 +588,7 @@ static int pin_blocks(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 		scb_s->itdba = hpa;
 	}
 
-	gpa = scb_o->gvrd & ~0x1ffUL;
+	gpa = READ_ONCE(scb_o->gvrd) & ~0x1ffUL;
 	if (gpa && (scb_s->eca & ECA_VX) && !(scb_s->ecd & ECD_HOSTREGMGMT)) {
 		if (!(gpa & ~0x1fffUL)) {
 			rc = set_validity_icpt(scb_s, 0x1310U);
@@ -594,7 +606,7 @@ static int pin_blocks(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 		scb_s->gvrd = hpa;
 	}
 
-	gpa = scb_o->riccbd & ~0x3fUL;
+	gpa = READ_ONCE(scb_o->riccbd) & ~0x3fUL;
 	if (gpa && (scb_s->ecb3 & ECB3_RI)) {
 		if (!(gpa & ~0x1fffUL)) {
 			rc = set_validity_icpt(scb_s, 0x0043U);
@@ -612,8 +624,8 @@ static int pin_blocks(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 	if ((scb_s->ecb & ECB_GS) && !(scb_s->ecd & ECD_HOSTREGMGMT)) {
 		unsigned long sdnxc;
 
-		gpa = scb_o->sdnxo & ~0xfUL;
-		sdnxc = scb_o->sdnxo & 0xfUL;
+		gpa = READ_ONCE(scb_o->sdnxo) & ~0xfUL;
+		sdnxc = READ_ONCE(scb_o->sdnxo) & 0xfUL;
 		if (!gpa || !(gpa & ~0x1fffUL)) {
 			rc = set_validity_icpt(scb_s, 0x10b0U);
 			goto unpin;
@@ -778,7 +790,7 @@ static void retry_vsie_icpt(struct vsie_page *vsie_page)
 static int handle_stfle(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 {
 	struct kvm_s390_sie_block *scb_s = &vsie_page->scb_s;
-	__u32 fac = vsie_page->scb_o->fac & 0x7ffffff8U;
+	__u32 fac = READ_ONCE(vsie_page->scb_o->fac) & 0x7ffffff8U;
 
 	if (fac && test_kvm_facility(vcpu->kvm, 7)) {
 		retry_vsie_icpt(vsie_page);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 083/189] KVM: s390: vsie: store guest addresses of satellite blocks in vsie_page

[Sasha Levin]

From: David Hildenbrand <david@redhat.com>

[ Upstream commit 15e5020e575d0c1a4eddd99bf7ffdc1f34a3b17d ]

This way, the values cannot change, even if another VCPU might try to
mess with the nested SCB currently getting executed by another VCPU.

We now always use the same gpa for pinning and unpinning a page (for
unpinning, it is only relevant to mark the guest page dirty for
migration).

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180116171526.12343-3-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/s390/kvm/vsie.c | 37 ++++++++++++++++++++++---------------
 1 file changed, 22 insertions(+), 15 deletions(-)

diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
index 11fc525e6e7f..861832c2e842 100644
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -38,7 +38,13 @@ struct vsie_page {
 	struct gmap *gmap;			/* 0x0220 */
 	/* address of the last reported fault to guest2 */
 	unsigned long fault_addr;		/* 0x0228 */
-	__u8 reserved[0x0700 - 0x0230];		/* 0x0230 */
+	/* calculated guest addresses of satellite control blocks */
+	gpa_t sca_gpa;				/* 0x0230 */
+	gpa_t itdba_gpa;			/* 0x0238 */
+	gpa_t gvrd_gpa;				/* 0x0240 */
+	gpa_t riccbd_gpa;			/* 0x0248 */
+	gpa_t sdnx_gpa;				/* 0x0250 */
+	__u8 reserved[0x0700 - 0x0258];		/* 0x0258 */
 	struct kvm_s390_crypto_cb crycb;	/* 0x0700 */
 	__u8 fac[S390_ARCH_FAC_LIST_SIZE_BYTE];	/* 0x0800 */
 };
@@ -485,46 +491,42 @@ static void unpin_guest_page(struct kvm *kvm, gpa_t gpa, hpa_t hpa)
 /* unpin all blocks previously pinned by pin_blocks(), marking them dirty */
 static void unpin_blocks(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 {
-	struct kvm_s390_sie_block *scb_o = vsie_page->scb_o;
 	struct kvm_s390_sie_block *scb_s = &vsie_page->scb_s;
 	hpa_t hpa;
-	gpa_t gpa;
 
 	hpa = (u64) scb_s->scaoh << 32 | scb_s->scaol;
 	if (hpa) {
-		gpa = scb_o->scaol & ~0xfUL;
-		if (test_kvm_cpu_feat(vcpu->kvm, KVM_S390_VM_CPU_FEAT_64BSCAO))
-			gpa |= (u64) scb_o->scaoh << 32;
-		unpin_guest_page(vcpu->kvm, gpa, hpa);
+		unpin_guest_page(vcpu->kvm, vsie_page->sca_gpa, hpa);
+		vsie_page->sca_gpa = 0;
 		scb_s->scaol = 0;
 		scb_s->scaoh = 0;
 	}
 
 	hpa = scb_s->itdba;
 	if (hpa) {
-		gpa = scb_o->itdba & ~0xffUL;
-		unpin_guest_page(vcpu->kvm, gpa, hpa);
+		unpin_guest_page(vcpu->kvm, vsie_page->itdba_gpa, hpa);
+		vsie_page->itdba_gpa = 0;
 		scb_s->itdba = 0;
 	}
 
 	hpa = scb_s->gvrd;
 	if (hpa) {
-		gpa = scb_o->gvrd & ~0x1ffUL;
-		unpin_guest_page(vcpu->kvm, gpa, hpa);
+		unpin_guest_page(vcpu->kvm, vsie_page->gvrd_gpa, hpa);
+		vsie_page->gvrd_gpa = 0;
 		scb_s->gvrd = 0;
 	}
 
 	hpa = scb_s->riccbd;
 	if (hpa) {
-		gpa = scb_o->riccbd & ~0x3fUL;
-		unpin_guest_page(vcpu->kvm, gpa, hpa);
+		unpin_guest_page(vcpu->kvm, vsie_page->riccbd_gpa, hpa);
+		vsie_page->riccbd_gpa = 0;
 		scb_s->riccbd = 0;
 	}
 
 	hpa = scb_s->sdnxo;
 	if (hpa) {
-		gpa = scb_o->sdnxo;
-		unpin_guest_page(vcpu->kvm, gpa, hpa);
+		unpin_guest_page(vcpu->kvm, vsie_page->sdnx_gpa, hpa);
+		vsie_page->sdnx_gpa = 0;
 		scb_s->sdnxo = 0;
 	}
 }
@@ -569,6 +571,7 @@ static int pin_blocks(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 		}
 		if (rc)
 			goto unpin;
+		vsie_page->sca_gpa = gpa;
 		scb_s->scaoh = (u32)((u64)hpa >> 32);
 		scb_s->scaol = (u32)(u64)hpa;
 	}
@@ -585,6 +588,7 @@ static int pin_blocks(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 			rc = set_validity_icpt(scb_s, 0x0080U);
 			goto unpin;
 		}
+		vsie_page->itdba_gpa = gpa;
 		scb_s->itdba = hpa;
 	}
 
@@ -603,6 +607,7 @@ static int pin_blocks(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 			rc = set_validity_icpt(scb_s, 0x1310U);
 			goto unpin;
 		}
+		vsie_page->gvrd_gpa = gpa;
 		scb_s->gvrd = hpa;
 	}
 
@@ -619,6 +624,7 @@ static int pin_blocks(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 			goto unpin;
 		}
 		/* Validity 0x0044 will be checked by SIE */
+		vsie_page->riccbd_gpa = gpa;
 		scb_s->riccbd = hpa;
 	}
 	if ((scb_s->ecb & ECB_GS) && !(scb_s->ecd & ECD_HOSTREGMGMT)) {
@@ -646,6 +652,7 @@ static int pin_blocks(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 			rc = set_validity_icpt(scb_s, 0x10b0U);
 			goto unpin;
 		}
+		vsie_page->sdnx_gpa = gpa;
 		scb_s->sdnxo = hpa | sdnxc;
 	}
 	return 0;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 084/189] blk-mq-debugfs: don't allow write on attributes with seq_operations set

[Sasha Levin]

From: Eryu Guan <eguan@redhat.com>

[ Upstream commit 6b136a24b05c81a24e0b648a4bd938bcd0c4f69e ]

Attributes that only implement .seq_ops are read-only, any write to
them should be rejected. But currently kernel would crash when
writing to such debugfs entries, e.g.

chmod +w /sys/kernel/debug/block/<dev>/requeue_list
echo 0 > /sys/kernel/debug/block/<dev>/requeue_list
chmod -w /sys/kernel/debug/block/<dev>/requeue_list

Fix it by returning -EPERM in blk_mq_debugfs_write() when writing to
such attributes.

Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 block/blk-mq-debugfs.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c
index b56a4f35720d..54bd8c31b822 100644
--- a/block/blk-mq-debugfs.c
+++ b/block/blk-mq-debugfs.c
@@ -703,7 +703,11 @@ static ssize_t blk_mq_debugfs_write(struct file *file, const char __user *buf,
 	const struct blk_mq_debugfs_attr *attr = m->private;
 	void *data = d_inode(file->f_path.dentry->d_parent)->i_private;
 
-	if (!attr->write)
+	/*
+	 * Attributes that only implement .seq_ops are read-only and 'attr' is
+	 * the same with 'data' in this case.
+	 */
+	if (attr == data || !attr->write)
 		return -EPERM;
 
 	return attr->write(data, buf, count, ppos);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 085/189] ASoC: rockchip: Use dummy_dai for rt5514 dsp dailink

[Sasha Levin]

From: Jeffy Chen <jeffy.chen@rock-chips.com>

[ Upstream commit fde7f9dbc71365230eeb8c8ea97ce9b552c8e5bd ]

The rt5514 dsp captures pcm data through spi directly, so we should not
use rockchip-i2s as it's cpu dai like other codecs.

Use dummy_dai for rt5514 dsp dailink to make voice wakeup work again.

Reported-by: Jimmy Cheng-Yi Chiang <cychiang@google.com>
Fixes: (72cfb0f20c75 ASoC: rockchip: Use codec of_node and dai_name for rt5514 dsp)
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/rockchip/rk3399_gru_sound.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/sound/soc/rockchip/rk3399_gru_sound.c b/sound/soc/rockchip/rk3399_gru_sound.c
index d64fbbd50544..aa8ffd035377 100644
--- a/sound/soc/rockchip/rk3399_gru_sound.c
+++ b/sound/soc/rockchip/rk3399_gru_sound.c
@@ -367,7 +367,8 @@ static const struct snd_soc_dai_link rockchip_dais[] = {
 	[DAILINK_RT5514_DSP] = {
 		.name = "RT5514 DSP",
 		.stream_name = "Wake on Voice",
-		.codec_dai_name = "rt5514-dsp-cpu-dai",
+		.codec_name = "snd-soc-dummy",
+		.codec_dai_name = "snd-soc-dummy-dai",
 	},
 };
 
@@ -528,7 +529,18 @@ static int rockchip_sound_of_parse_dais(struct device *dev,
 		if (index < 0)
 			continue;
 
-		np_cpu = (index == DAILINK_CDNDP) ? np_cpu1 : np_cpu0;
+		switch (index) {
+		case DAILINK_CDNDP:
+			np_cpu = np_cpu1;
+			break;
+		case DAILINK_RT5514_DSP:
+			np_cpu = np_codec;
+			break;
+		default:
+			np_cpu = np_cpu0;
+			break;
+		}
+
 		if (!np_cpu) {
 			dev_err(dev, "Missing 'rockchip,cpu' for %s\n",
 				rockchip_dais[index].name);
@@ -538,7 +550,8 @@ static int rockchip_sound_of_parse_dais(struct device *dev,
 		dai = &card->dai_link[card->num_links++];
 		*dai = rockchip_dais[index];
 
-		dai->codec_of_node = np_codec;
+		if (!dai->codec_name)
+			dai->codec_of_node = np_codec;
 		dai->platform_of_node = np_cpu;
 		dai->cpu_of_node = np_cpu;
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 086/189] igb: Allow to remove administratively set MAC on VFs

[Sasha Levin]

From: Corinna Vinschen <vinschen@redhat.com>

[ Upstream commit 177132df5e45b134c147f419f567a3b56aafaf2b ]

Before libvirt modifies the MAC address and vlan tag for an SRIOV VF
for use by a virtual machine (either using vfio device assignment or
macvtap passthru mode), it saves the current MAC address and vlan tag
so that it can reset them to their original value when the guest is
done.  Libvirt can't leave the VF MAC set to the value used by the
now-defunct guest since it may be started again later using a
different VF, but it certainly shouldn't just pick any random value,
either. So it saves the state of everything prior to using the VF, and
resets it to that.

The igb driver initializes the MAC addresses of all VFs to
00:00:00:00:00:00, and reports that when asked (via an RTM_GETLINK
netlink message, also visible in the list of VFs in the output of "ip
link show"). But when libvirt attempts to restore the MAC address back
to 00:00:00:00:00:00 (using an RTM_SETLINK netlink message) the kernel
responds with "Invalid argument".

Forbidding a reset back to the original value leaves the VF MAC at the
value set for the now-defunct virtual machine. Especially on a system
with NetworkManager enabled, this has very bad consequences, since
NetworkManager forces all interfacess to be IFF_UP all the time - if
the same virtual machine is restarted using a different VF (or even on
a different host), there will be multiple interfaces watching for
traffic with the same MAC address.

To allow libvirt to revert to the original state, we need a way to
remove the administrative set MAC on a VF, to allow normal host
operation again, and to reset/overwrite the VF MAC via VF netdev.

This patch implements the outlined scenario by allowing to set the
VF MAC to 00:00:00:00:00:00 via RTM_SETLINK on the PF.
igb_ndo_set_vf_mac resets the IGB_VF_FLAG_PF_SET_MAC flag to 0,
so it's possible to reset the VF MAC back to the original value via
the VF netdev.

Note: Recent patches to libvirt allow for a workaround if the NIC
isn't capable of resetting the administrative MAC back to all 0, but
in theory the NIC should allow resetting the MAC in the first place.

Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Tested-by: Aaron Brown <arron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 42 +++++++++++++++++++++++--------
 1 file changed, 31 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index c69a5b3ae8c8..13dd7d2d90fe 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -8718,7 +8718,8 @@ static void igb_rar_set_index(struct igb_adapter *adapter, u32 index)
 
 	/* Indicate to hardware the Address is Valid. */
 	if (adapter->mac_table[index].state & IGB_MAC_STATE_IN_USE) {
-		rar_high |= E1000_RAH_AV;
+		if (is_valid_ether_addr(addr))
+			rar_high |= E1000_RAH_AV;
 
 		if (hw->mac.type == e1000_82575)
 			rar_high |= E1000_RAH_POOL_1 *
@@ -8756,17 +8757,36 @@ static int igb_set_vf_mac(struct igb_adapter *adapter,
 static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
-	if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count))
+
+	if (vf >= adapter->vfs_allocated_count)
+		return -EINVAL;
+
+	/* Setting the VF MAC to 0 reverts the IGB_VF_FLAG_PF_SET_MAC
+	 * flag and allows to overwrite the MAC via VF netdev.  This
+	 * is necessary to allow libvirt a way to restore the original
+	 * MAC after unbinding vfio-pci and reloading igbvf after shutting
+	 * down a VM.
+	 */
+	if (is_zero_ether_addr(mac)) {
+		adapter->vf_data[vf].flags &= ~IGB_VF_FLAG_PF_SET_MAC;
+		dev_info(&adapter->pdev->dev,
+			 "remove administratively set MAC on VF %d\n",
+			 vf);
+	} else if (is_valid_ether_addr(mac)) {
+		adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC;
+		dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n",
+			 mac, vf);
+		dev_info(&adapter->pdev->dev,
+			 "Reload the VF driver to make this change effective.");
+		/* Generate additional warning if PF is down */
+		if (test_bit(__IGB_DOWN, &adapter->state)) {
+			dev_warn(&adapter->pdev->dev,
+				 "The VF MAC address has been set, but the PF device is not up.\n");
+			dev_warn(&adapter->pdev->dev,
+				 "Bring the PF device up before attempting to use the VF device.\n");
+		}
+	} else {
 		return -EINVAL;
-	adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC;
-	dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
-	dev_info(&adapter->pdev->dev,
-		 "Reload the VF driver to make this change effective.");
-	if (test_bit(__IGB_DOWN, &adapter->state)) {
-		dev_warn(&adapter->pdev->dev,
-			 "The VF MAC address has been set, but the PF device is not up.\n");
-		dev_warn(&adapter->pdev->dev,
-			 "Bring the PF device up before attempting to use the VF device.\n");
 	}
 	return igb_set_vf_mac(adapter, vf, mac);
 }
-- 
2.15.1

[PATCH AUTOSEL for 4.15 087/189] igb: Clear TXSTMP when ptp_tx_work() is timeout

[Sasha Levin]

From: Daniel Hua <daniel.hua@ni.com>

[ Upstream commit 3a53285228165225a7f76c7d5ff1ddc0213ce0e4 ]

Problem description:
After ethernet cable connect and disconnect for several iterations on a
device with i210, tx timestamp will stop being put into the socket.

Steps to reproduce:
1. Setup a device with i210 and wire it to a 802.1AS capable switch (
Extreme Networks Summit x440 is used in our case)
2. Have the gptp daemon running on the device and make sure it is synced
with the switch
3. Have the switch disable and enable the port, wait for the device gets
resynced with the switch
4. Iterates step 3 until the device is not albe to get resynced
5. Review the log in dmesg and you will see warning message "igb : clearing
Tx timestamp hang"

Root cause:
If ptp_tx_work() gets scheduled just before the port gets disabled, a LINK
DOWN event will be processed before ptp_tx_work(), which may cause timeout
in ptp_tx_work(). In the timeout logic, the TSYNCTXCTL's TXTT bit (Transmit
timestamp valid bit) is not cleared, causing no new timestamp loaded to
TXSTMP register. Consequently therefore, no new interrupt is triggerred by
TSICR.TXTS bit and no more Tx timestamp send to the socket.

Signed-off-by: Daniel Hua <daniel.hua@ni.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/igb/igb_ptp.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 841c2a083349..0746b19ec6d3 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -643,6 +643,10 @@ static void igb_ptp_tx_work(struct work_struct *work)
 		adapter->ptp_tx_skb = NULL;
 		clear_bit_unlock(__IGB_PTP_TX_IN_PROGRESS, &adapter->state);
 		adapter->tx_hwtstamp_timeouts++;
+		/* Clear the tx valid bit in TSYNCTXCTL register to enable
+		 * interrupt
+		 */
+		rd32(E1000_TXSTMPH);
 		dev_warn(&adapter->pdev->dev, "clearing Tx timestamp hang\n");
 		return;
 	}
@@ -717,6 +721,7 @@ void igb_ptp_rx_hang(struct igb_adapter *adapter)
  */
 void igb_ptp_tx_hang(struct igb_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	bool timeout = time_is_before_jiffies(adapter->ptp_tx_start +
 					      IGB_PTP_TX_TIMEOUT);
 
@@ -736,6 +741,10 @@ void igb_ptp_tx_hang(struct igb_adapter *adapter)
 		adapter->ptp_tx_skb = NULL;
 		clear_bit_unlock(__IGB_PTP_TX_IN_PROGRESS, &adapter->state);
 		adapter->tx_hwtstamp_timeouts++;
+		/* Clear the tx valid bit in TSYNCTXCTL register to enable
+		 * interrupt
+		 */
+		rd32(E1000_TXSTMPH);
 		dev_warn(&adapter->pdev->dev, "clearing Tx timestamp hang\n");
 	}
 }
-- 
2.15.1

[PATCH AUTOSEL for 4.15 088/189] fm10k: fix "failed to kill vid" message for VF

[Sasha Levin]

From: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>

[ Upstream commit cf315ea596ec26d7aa542a9ce354990875a920c0 ]

When a VF is under PF VLAN assignment:

ip link set <pf> vf <#> vlan <vid>

This will remove all previous entries in the VLAN table including those
generated by VLAN interfaces created on the VF. The issue arises when
the VF is under PF VLAN assignment and one or more of these VLAN
interfaces of the VF are deleted. When deleting these VLAN interfaces,
the following message will be generated in "dmesg":

failed to kill vid 0081/<vid> for device <vf>

This is due to the fact that "ndo_vlan_rx_kill_vid" exits with an error.
The handler for this ndo is "fm10k_update_vid". Any calls to this
function while under PF VLAN management will exit prematurely and, thus,
it will generate the failure message.

Additionally, since "fm10k_update_vid" exits prematurely, none of the
VLAN update is performed. So, even though the actual VLAN interfaces of
the VF will be deleted, the active_vlans bitmask is not cleared. When
the VF is no longer under PF VLAN assignment, the driver mistakenly
restores the previous entries of the VLAN table based on an
unsynchronized list of active VLANs.

The solution to this issue involves checking the VLAN update action type
before exiting "fm10k_update_vid". If the VLAN update action type is to
"add", this action will not be permitted while the VF is under PF VLAN
assignment and the VLAN update is abandoned like before.

However, if the VLAN update action type is to "kill", then we need to
also clear the active_vlans bitmask. However, we don't need to actually
queue any messages to the PF, because the MAC and VLAN tables have
already been cleared, and the PF would silently ignore these requests
anyways.

Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/fm10k/fm10k_netdev.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
index adc62fb38c49..61d062836402 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
@@ -934,8 +934,12 @@ static int fm10k_update_vid(struct net_device *netdev, u16 vid, bool set)
 	if (vid >= VLAN_N_VID)
 		return -EINVAL;
 
-	/* Verify we have permission to add VLANs */
-	if (hw->mac.vlan_override)
+	/* Verify that we have permission to add VLANs. If this is a request
+	 * to remove a VLAN, we still want to allow the user to remove the
+	 * VLAN device. In that case, we need to clear the bit in the
+	 * active_vlans bitmask.
+	 */
+	if (set && hw->mac.vlan_override)
 		return -EACCES;
 
 	/* update active_vlans bitmask */
@@ -954,6 +958,12 @@ static int fm10k_update_vid(struct net_device *netdev, u16 vid, bool set)
 			rx_ring->vid &= ~FM10K_VLAN_CLEAR;
 	}
 
+	/* If our VLAN has been overridden, there is no reason to send VLAN
+	 * removal requests as they will be silently ignored.
+	 */
+	if (hw->mac.vlan_override)
+		return 0;
+
 	/* Do not remove default VLAN ID related entries from VLAN and MAC
 	 * tables
 	 */
-- 
2.15.1

[PATCH AUTOSEL for 4.15 089/189] Input: edt-ft5x06 - fix error handling for factory mode on non-M06

[Sasha Levin]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit 4b3e910d7f430ab76dd37131bb75129878950163 ]

When attempting enter factory mode on firmware that does not support it,
we'd error out, but leave the device with interrupts disabled, and thus
touch not working. Fix it by moving the check before we disable
interrupts/allocate memory for debug buffers.

Fixes: fd335ab04b3f ("Input: edt-ft5x06 - add support for M09 firmware version")
Reviewed-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/input/touchscreen/edt-ft5x06.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index c53a3d7239e7..1e18ca0d1b4e 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -511,6 +511,12 @@ static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
 	int ret;
 	int error;
 
+	if (tsdata->version != EDT_M06) {
+		dev_err(&client->dev,
+			"No factory mode support for non-M06 devices\n");
+		return -EINVAL;
+	}
+
 	disable_irq(client->irq);
 
 	if (!tsdata->raw_buffer) {
@@ -524,9 +530,6 @@ static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
 	}
 
 	/* mode register is 0x3c when in the work mode */
-	if (tsdata->version != EDT_M06)
-		goto m09_out;
-
 	error = edt_ft5x06_register_write(tsdata, WORK_REGISTER_OPMODE, 0x03);
 	if (error) {
 		dev_err(&client->dev,
@@ -559,11 +562,6 @@ err_out:
 	enable_irq(client->irq);
 
 	return error;
-
-m09_out:
-	dev_err(&client->dev, "No factory mode support for M09/M12/GENERIC_FT\n");
-	return -EINVAL;
-
 }
 
 static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 090/189] x86/hyperv: Stop suppressing X86_FEATURE_PCID

[Sasha Levin]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 617ab45c9a8900e64a78b43696c02598b8cad68b ]

When hypercall-based TLB flush was enabled for Hyper-V guests PCID feature
was deliberately suppressed as a precaution: back then PCID was never
exposed to Hyper-V guests and it wasn't clear what will happen if some day
it becomes available. The day came and PCID/INVPCID features are already
exposed on certain Hyper-V hosts.

>From TLFS (as of 5.0b) it is unclear how TLB flush hypercalls combine with
PCID. In particular the usage of PCID is per-cpu based: the same mm gets
different CR3 values on different CPUs. If the hypercall does exact
matching this will fail. However, this is not the case. David Zhang
explains:

 "In practice, the AddressSpace argument is ignored on any VM that supports
  PCIDs.

  Architecturally, the AddressSpace argument must match the CR3 with PCID
  bits stripped out (i.e., the low 12 bits of AddressSpace should be 0 in
  long mode). The flush hypercalls flush all PCIDs for the specified
  AddressSpace."

With this, PCID can be enabled.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Zhang <dazhan@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: devel@linuxdriverproject.org
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Aditya Bhandari <adityabh@microsoft.com>
Link: https://lkml.kernel.org/r/20180124103629.29980-1-vkuznets@redhat.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/hyperv/mmu.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/x86/hyperv/mmu.c b/arch/x86/hyperv/mmu.c
index 9cc9e1c1e2db..56c9ebac946f 100644
--- a/arch/x86/hyperv/mmu.c
+++ b/arch/x86/hyperv/mmu.c
@@ -137,7 +137,12 @@ static void hyperv_flush_tlb_others(const struct cpumask *cpus,
 	}
 
 	if (info->mm) {
+		/*
+		 * AddressSpace argument must match the CR3 with PCID bits
+		 * stripped out.
+		 */
 		flush->address_space = virt_to_phys(info->mm->pgd);
+		flush->address_space &= CR3_ADDR_MASK;
 		flush->flags = 0;
 	} else {
 		flush->address_space = 0;
@@ -219,7 +224,12 @@ static void hyperv_flush_tlb_others_ex(const struct cpumask *cpus,
 	}
 
 	if (info->mm) {
+		/*
+		 * AddressSpace argument must match the CR3 with PCID bits
+		 * stripped out.
+		 */
 		flush->address_space = virt_to_phys(info->mm->pgd);
+		flush->address_space &= CR3_ADDR_MASK;
 		flush->flags = 0;
 	} else {
 		flush->address_space = 0;
@@ -278,8 +288,6 @@ void hyperv_setup_mmu_ops(void)
 	if (!(ms_hyperv.hints & HV_X64_REMOTE_TLB_FLUSH_RECOMMENDED))
 		return;
 
-	setup_clear_cpu_cap(X86_FEATURE_PCID);
-
 	if (!(ms_hyperv.hints & HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED)) {
 		pr_info("Using hypercall for remote TLB flush\n");
 		pv_mmu_ops.flush_tlb_others = hyperv_flush_tlb_others;
-- 
2.15.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL for 4.15 090/189] x86/hyperv: Stop suppressing X86_FEATURE_PCID

[Sasha Levin]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 617ab45c9a8900e64a78b43696c02598b8cad68b ]

When hypercall-based TLB flush was enabled for Hyper-V guests PCID feature
was deliberately suppressed as a precaution: back then PCID was never
exposed to Hyper-V guests and it wasn't clear what will happen if some day
it becomes available. The day came and PCID/INVPCID features are already
exposed on certain Hyper-V hosts.

>From TLFS (as of 5.0b) it is unclear how TLB flush hypercalls combine with
PCID. In particular the usage of PCID is per-cpu based: the same mm gets
different CR3 values on different CPUs. If the hypercall does exact
matching this will fail. However, this is not the case. David Zhang
explains:

 "In practice, the AddressSpace argument is ignored on any VM that supports
  PCIDs.

  Architecturally, the AddressSpace argument must match the CR3 with PCID
  bits stripped out (i.e., the low 12 bits of AddressSpace should be 0 in
  long mode). The flush hypercalls flush all PCIDs for the specified
  AddressSpace."

With this, PCID can be enabled.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Zhang <dazhan@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: devel@linuxdriverproject.org
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Aditya Bhandari <adityabh@microsoft.com>
Link: https://lkml.kernel.org/r/20180124103629.29980-1-vkuznets@redhat.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/hyperv/mmu.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/x86/hyperv/mmu.c b/arch/x86/hyperv/mmu.c
index 9cc9e1c1e2db..56c9ebac946f 100644
--- a/arch/x86/hyperv/mmu.c
+++ b/arch/x86/hyperv/mmu.c
@@ -137,7 +137,12 @@ static void hyperv_flush_tlb_others(const struct cpumask *cpus,
 	}
 
 	if (info->mm) {
+		/*
+		 * AddressSpace argument must match the CR3 with PCID bits
+		 * stripped out.
+		 */
 		flush->address_space = virt_to_phys(info->mm->pgd);
+		flush->address_space &= CR3_ADDR_MASK;
 		flush->flags = 0;
 	} else {
 		flush->address_space = 0;
@@ -219,7 +224,12 @@ static void hyperv_flush_tlb_others_ex(const struct cpumask *cpus,
 	}
 
 	if (info->mm) {
+		/*
+		 * AddressSpace argument must match the CR3 with PCID bits
+		 * stripped out.
+		 */
 		flush->address_space = virt_to_phys(info->mm->pgd);
+		flush->address_space &= CR3_ADDR_MASK;
 		flush->flags = 0;
 	} else {
 		flush->address_space = 0;
@@ -278,8 +288,6 @@ void hyperv_setup_mmu_ops(void)
 	if (!(ms_hyperv.hints & HV_X64_REMOTE_TLB_FLUSH_RECOMMENDED))
 		return;
 
-	setup_clear_cpu_cap(X86_FEATURE_PCID);
-
 	if (!(ms_hyperv.hints & HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED)) {
 		pr_info("Using hypercall for remote TLB flush\n");
 		pv_mmu_ops.flush_tlb_others = hyperv_flush_tlb_others;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 091/189] lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN

[Sasha Levin]

From: Ivan Delalande <colona@arista.com>

[ Upstream commit 5be2a5011c039506e2862650c928acfb2e3d7b9c ]

Function handle_IRQ_event was retired in v2.6.39 and replaced with
handle_irq_event but nobody changed it in lkdtm so INT_HW_IRQ_EN has
been broken for a while.

Fixes: 33b054b867b8 ("genirq: Remove handle_IRQ_event")
Signed-off-by: Travis Brown <travisb@arista.com>
Signed-off-by: Ivan Delalande <colona@arista.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/misc/lkdtm_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/lkdtm_core.c b/drivers/misc/lkdtm_core.c
index ba92291508dc..4942da93d066 100644
--- a/drivers/misc/lkdtm_core.c
+++ b/drivers/misc/lkdtm_core.c
@@ -96,7 +96,7 @@ static struct crashpoint crashpoints[] = {
 	CRASHPOINT("DIRECT",		 NULL),
 #ifdef CONFIG_KPROBES
 	CRASHPOINT("INT_HARDWARE_ENTRY", "do_IRQ"),
-	CRASHPOINT("INT_HW_IRQ_EN",	 "handle_IRQ_event"),
+	CRASHPOINT("INT_HW_IRQ_EN",	 "handle_irq_event"),
 	CRASHPOINT("INT_TASKLET_ENTRY",	 "tasklet_action"),
 	CRASHPOINT("FS_DEVRW",		 "ll_rw_block"),
 	CRASHPOINT("MEM_SWAPOUT",	 "shrink_inactive_list"),
-- 
2.15.1

[PATCH AUTOSEL for 4.15 092/189] tty: serial: exar: Relocate sleep wake-up handling

[Sasha Levin]

From: Aaron Sierra <asierra@xes-inc.com>

[ Upstream commit c7e1b4059075c9e8eed101d7cc5da43e95eb5e18 ]

Exar sleep wake-up handling has been done on a per-channel basis by
virtue of INT0 being accessible from each channel's address space. I
believe this was initially done out of necessity, but now that Exar
devices have their own driver, we can do things more efficiently by
registering a dedicated INT0 handler at the PCI device level.

I see this change providing the following benefits:

    1. If more than one port is active, eliminates the redundant bus
       cycles for reading INT0 on every interrupt.
    2. This note associated with hooking in the per-channel handler in
       8250_port.c is resolved:
        /* Fixme: probably not the best place for this */

Cc: Matt Schulte <matts@commtech-fastcom.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/tty/serial/8250/8250_exar.c | 34 ++++++++++++++++++++++++++++++----
 drivers/tty/serial/8250/8250_port.c | 26 --------------------------
 2 files changed, 30 insertions(+), 30 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index a402878c9f30..38af306ca0e8 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -34,6 +34,7 @@
 #define PCI_DEVICE_ID_EXAR_XR17V4358		0x4358
 #define PCI_DEVICE_ID_EXAR_XR17V8358		0x8358
 
+#define UART_EXAR_INT0		0x80
 #define UART_EXAR_8XMODE	0x88	/* 8X sampling rate select */
 
 #define UART_EXAR_FCTR		0x08	/* Feature Control Register */
@@ -121,6 +122,7 @@ struct exar8250_board {
 struct exar8250 {
 	unsigned int		nr;
 	struct exar8250_board	*board;
+	void __iomem		*virt;
 	int			line[0];
 };
 
@@ -131,12 +133,9 @@ static int default_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 	const struct exar8250_board *board = priv->board;
 	unsigned int bar = 0;
 
-	if (!pcim_iomap_table(pcidev)[bar] && !pcim_iomap(pcidev, bar, 0))
-		return -ENOMEM;
-
 	port->port.iotype = UPIO_MEM;
 	port->port.mapbase = pci_resource_start(pcidev, bar) + offset;
-	port->port.membase = pcim_iomap_table(pcidev)[bar] + offset;
+	port->port.membase = priv->virt + offset;
 	port->port.regshift = board->reg_shift;
 
 	return 0;
@@ -420,6 +419,25 @@ static void pci_xr17v35x_exit(struct pci_dev *pcidev)
 	port->port.private_data = NULL;
 }
 
+/*
+ * These Exar UARTs have an extra interrupt indicator that could fire for a
+ * few interrupts that are not presented/cleared through IIR.  One of which is
+ * a wakeup interrupt when coming out of sleep.  These interrupts are only
+ * cleared by reading global INT0 or INT1 registers as interrupts are
+ * associated with channel 0. The INT[3:0] registers _are_ accessible from each
+ * channel's address space, but for the sake of bus efficiency we register a
+ * dedicated handler at the PCI device level to handle them.
+ */
+static irqreturn_t exar_misc_handler(int irq, void *data)
+{
+	struct exar8250 *priv = data;
+
+	/* Clear all PCI interrupts by reading INT0. No effect on IIR */
+	ioread8(priv->virt + UART_EXAR_INT0);
+
+	return IRQ_HANDLED;
+}
+
 static int
 exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 {
@@ -448,6 +466,9 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 		return -ENOMEM;
 
 	priv->board = board;
+	priv->virt = pcim_iomap(pcidev, bar, 0);
+	if (!priv->virt)
+		return -ENOMEM;
 
 	pci_set_master(pcidev);
 
@@ -461,6 +482,11 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 	uart.port.irq = pci_irq_vector(pcidev, 0);
 	uart.port.dev = &pcidev->dev;
 
+	rc = devm_request_irq(&pcidev->dev, uart.port.irq, exar_misc_handler,
+			 IRQF_SHARED, "exar_uart", priv);
+	if (rc)
+		return rc;
+
 	for (i = 0; i < nr_ports && i < maxnr; i++) {
 		rc = board->setup(priv, pcidev, &uart, i);
 		if (rc) {
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 11434551ac0a..1328c7e70108 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -441,7 +441,6 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
 }
 
 static int serial8250_default_handle_irq(struct uart_port *port);
-static int exar_handle_irq(struct uart_port *port);
 
 static void set_io_from_upio(struct uart_port *p)
 {
@@ -1883,26 +1882,6 @@ static int serial8250_default_handle_irq(struct uart_port *port)
 	return ret;
 }
 
-/*
- * These Exar UARTs have an extra interrupt indicator that could
- * fire for a few unimplemented interrupts.  One of which is a
- * wakeup event when coming out of sleep.  Put this here just
- * to be on the safe side that these interrupts don't go unhandled.
- */
-static int exar_handle_irq(struct uart_port *port)
-{
-	unsigned int iir = serial_port_in(port, UART_IIR);
-	int ret = 0;
-
-	if (((port->type == PORT_XR17V35X) || (port->type == PORT_XR17D15X)) &&
-	    serial_port_in(port, UART_EXAR_INT0) != 0)
-		ret = 1;
-
-	ret |= serial8250_handle_irq(port, iir);
-
-	return ret;
-}
-
 /*
  * Newer 16550 compatible parts such as the SC16C650 & Altera 16550 Soft IP
  * have a programmable TX threshold that triggers the THRE interrupt in
@@ -3067,11 +3046,6 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	if (port->type == PORT_UNKNOWN)
 		serial8250_release_std_resource(up);
 
-	/* Fixme: probably not the best place for this */
-	if ((port->type == PORT_XR17V35X) ||
-	   (port->type == PORT_XR17D15X))
-		port->handle_irq = exar_handle_irq;
-
 	register_dev_spec_attr_grp(up);
 	up->fcr = uart_config[up->port.type].fcr;
 }
-- 
2.15.1

[PATCH AUTOSEL for 4.15 093/189] device property: Define type of PROPERTY_ENRTY_*() macros

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit c505cbd45f6e9c539d57dd171d95ec7e5e9f9cd0 ]

Some of the drivers may use the macro at runtime flow, like

  struct property_entry p[10];
...
  p[index++] = PROPERTY_ENTRY_U8("u8 property", u8_data);

In that case and absence of the data type compiler fails the build:

drivers/char/ipmi/ipmi_dmi.c:79:29: error: Expected ; at end of statement
drivers/char/ipmi/ipmi_dmi.c:79:29: error: got {

Acked-by: Corey Minyard <cminyard@mvista.com>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/linux/property.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/linux/property.h b/include/linux/property.h
index f6189a3ac63c..2e3a7c24659e 100644
--- a/include/linux/property.h
+++ b/include/linux/property.h
@@ -206,7 +206,7 @@ struct property_entry {
  */
 
 #define PROPERTY_ENTRY_INTEGER_ARRAY(_name_, _type_, _val_)	\
-{								\
+(struct property_entry) {					\
 	.name = _name_,						\
 	.length = ARRAY_SIZE(_val_) * sizeof(_type_),		\
 	.is_array = true,					\
@@ -224,7 +224,7 @@ struct property_entry {
 	PROPERTY_ENTRY_INTEGER_ARRAY(_name_, u64, _val_)
 
 #define PROPERTY_ENTRY_STRING_ARRAY(_name_, _val_)		\
-{								\
+(struct property_entry) {					\
 	.name = _name_,						\
 	.length = ARRAY_SIZE(_val_) * sizeof(const char *),	\
 	.is_array = true,					\
@@ -233,7 +233,7 @@ struct property_entry {
 }
 
 #define PROPERTY_ENTRY_INTEGER(_name_, _type_, _val_)	\
-{							\
+(struct property_entry) {				\
 	.name = _name_,					\
 	.length = sizeof(_type_),			\
 	.is_string = false,				\
@@ -250,7 +250,7 @@ struct property_entry {
 	PROPERTY_ENTRY_INTEGER(_name_, u64, _val_)
 
 #define PROPERTY_ENTRY_STRING(_name_, _val_)		\
-{							\
+(struct property_entry) {				\
 	.name = _name_,					\
 	.length = sizeof(_val_),			\
 	.is_string = true,				\
@@ -258,7 +258,7 @@ struct property_entry {
 }
 
 #define PROPERTY_ENTRY_BOOL(_name_)		\
-{						\
+(struct property_entry) {			\
 	.name = _name_,				\
 }
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 094/189] crypto: artpec6 - remove select on non-existing CRYPTO_SHA384

[Sasha Levin]

From: Corentin LABBE <clabbe.montjoie@gmail.com>

[ Upstream commit 980b4c95e78e4113cb7b9f430f121dab1c814b6c ]

Since CRYPTO_SHA384 does not exists, Kconfig should not select it.
Anyway, all SHA384 stuff is in CRYPTO_SHA512 which is already selected.

Fixes: a21eb94fc4d3i ("crypto: axis - add ARTPEC-6/7 crypto accelerator driver")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/crypto/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 47ec920d5b71..4b741b83e23f 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -723,7 +723,6 @@ config CRYPTO_DEV_ARTPEC6
 	select CRYPTO_HASH
 	select CRYPTO_SHA1
 	select CRYPTO_SHA256
-	select CRYPTO_SHA384
 	select CRYPTO_SHA512
 	help
 	  Enables the driver for the on-chip crypto accelerator
-- 
2.15.1

[PATCH AUTOSEL for 4.15 095/189] RDMA/uverbs: Use an unambiguous errno for method not supported

[Sasha Levin]

From: Jason Gunthorpe <jgg@mellanox.com>

[ Upstream commit 3624a8f02568f08aef299d3b117f2226f621177d ]

Returning EOPNOTSUPP is problematic because it can also be
returned by the method function, and we use it in quite a few
places in drivers these days.

Instead, dedicate EPROTONOSUPPORT to indicate that the ioctl framework
is enabled but the requested object and method are not supported by
the kernel. No other case will return this code, and it lets userspace
know to fall back to write().

grep says we do not use it today in drivers/infiniband subsystem.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/uverbs_ioctl.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/core/uverbs_ioctl.c b/drivers/infiniband/core/uverbs_ioctl.c
index 71ff2644e053..d96dc1d17be1 100644
--- a/drivers/infiniband/core/uverbs_ioctl.c
+++ b/drivers/infiniband/core/uverbs_ioctl.c
@@ -243,16 +243,13 @@ static long ib_uverbs_cmd_verbs(struct ib_device *ib_dev,
 	size_t ctx_size;
 	uintptr_t data[UVERBS_OPTIMIZE_USING_STACK_SZ / sizeof(uintptr_t)];
 
-	if (hdr->reserved)
-		return -EINVAL;
-
 	object_spec = uverbs_get_object(ib_dev, hdr->object_id);
 	if (!object_spec)
-		return -EOPNOTSUPP;
+		return -EPROTONOSUPPORT;
 
 	method_spec = uverbs_get_method(object_spec, hdr->method_id);
 	if (!method_spec)
-		return -EOPNOTSUPP;
+		return -EPROTONOSUPPORT;
 
 	if ((method_spec->flags & UVERBS_ACTION_FLAG_CREATE_ROOT) ^ !file->ucontext)
 		return -EINVAL;
@@ -305,6 +302,16 @@ static long ib_uverbs_cmd_verbs(struct ib_device *ib_dev,
 
 	err = uverbs_handle_method(buf, ctx->uattrs, hdr->num_attrs, ib_dev,
 				   file, method_spec, ctx->uverbs_attr_bundle);
+
+	/*
+	 * EPROTONOSUPPORT is ONLY to be returned if the ioctl framework can
+	 * not invoke the method because the request is not supported.  No
+	 * other cases should return this code.
+	*/
+	if (unlikely(err == -EPROTONOSUPPORT)) {
+		WARN_ON_ONCE(err == -EPROTONOSUPPORT);
+		err = -EINVAL;
+	}
 out:
 	if (ctx != (void *)data)
 		kfree(ctx);
@@ -341,7 +348,7 @@ long ib_uverbs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		}
 
 		if (hdr.reserved) {
-			err = -EOPNOTSUPP;
+			err = -EPROTONOSUPPORT;
 			goto out;
 		}
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 096/189] jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path

[Sasha Levin]

From: Jake Daryll Obina <jake.obina@gmail.com>

[ Upstream commit 5bdd0c6f89fba430e18d636493398389dadc3b17 ]

If jffs2_iget() fails for a newly-allocated inode, jffs2_do_clear_inode()
can get called twice in the error handling path, the first call in
jffs2_iget() itself and the second through iget_failed(). This can result
to a use-after-free error in the second jffs2_do_clear_inode() call, such
as shown by the oops below wherein the second jffs2_do_clear_inode() call
was trying to free node fragments that were already freed in the first
jffs2_do_clear_inode() call.

[   78.178860] jffs2: error: (1904) jffs2_do_read_inode_internal: CRC failed for read_inode of inode 24 at physical location 0x1fc00c
[   78.178914] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b7b
[   78.185871] pgd = ffffffc03a567000
[   78.188794] [6b6b6b6b6b6b6b7b] *pgd=0000000000000000, *pud=0000000000000000
[   78.194968] Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
[   78.513147] PC is at rb_first_postorder+0xc/0x28
[   78.516503] LR is at jffs2_kill_fragtree+0x28/0x90 [jffs2]
[   78.520672] pc : [<ffffff8008323d28>] lr : [<ffffff8000eb1cc8>] pstate: 60000105
[   78.526757] sp : ffffff800cea38f0
[   78.528753] x29: ffffff800cea38f0 x28: ffffffc01f3f8e80
[   78.532754] x27: 0000000000000000 x26: ffffff800cea3c70
[   78.536756] x25: 00000000dc67c8ae x24: ffffffc033d6945d
[   78.540759] x23: ffffffc036811740 x22: ffffff800891a5b8
[   78.544760] x21: 0000000000000000 x20: 0000000000000000
[   78.548762] x19: ffffffc037d48910 x18: ffffff800891a588
[   78.552764] x17: 0000000000000800 x16: 0000000000000c00
[   78.556766] x15: 0000000000000010 x14: 6f2065646f6e695f
[   78.560767] x13: 6461657220726f66 x12: 2064656c69616620
[   78.564769] x11: 435243203a6c616e x10: 7265746e695f6564
[   78.568771] x9 : 6f6e695f64616572 x8 : ffffffc037974038
[   78.572774] x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008
[   78.576775] x5 : 002f91d85bd44a2f x4 : 0000000000000000
[   78.580777] x3 : 0000000000000000 x2 : 000000403755e000
[   78.584779] x1 : 6b6b6b6b6b6b6b6b x0 : 6b6b6b6b6b6b6b6b
...
[   79.038551] [<ffffff8008323d28>] rb_first_postorder+0xc/0x28
[   79.042962] [<ffffff8000eb5578>] jffs2_do_clear_inode+0x88/0x100 [jffs2]
[   79.048395] [<ffffff8000eb9ddc>] jffs2_evict_inode+0x3c/0x48 [jffs2]
[   79.053443] [<ffffff8008201ca8>] evict+0xb0/0x168
[   79.056835] [<ffffff8008202650>] iput+0x1c0/0x200
[   79.060228] [<ffffff800820408c>] iget_failed+0x30/0x3c
[   79.064097] [<ffffff8000eba0c0>] jffs2_iget+0x2d8/0x360 [jffs2]
[   79.068740] [<ffffff8000eb0a60>] jffs2_lookup+0xe8/0x130 [jffs2]
[   79.073434] [<ffffff80081f1a28>] lookup_slow+0x118/0x190
[   79.077435] [<ffffff80081f4708>] walk_component+0xfc/0x28c
[   79.081610] [<ffffff80081f4dd0>] path_lookupat+0x84/0x108
[   79.085699] [<ffffff80081f5578>] filename_lookup+0x88/0x100
[   79.089960] [<ffffff80081f572c>] user_path_at_empty+0x58/0x6c
[   79.094396] [<ffffff80081ebe14>] vfs_statx+0xa4/0x114
[   79.098138] [<ffffff80081ec44c>] SyS_newfstatat+0x58/0x98
[   79.102227] [<ffffff800808354c>] __sys_trace_return+0x0/0x4
[   79.106489] Code: d65f03c0 f9400001 b40000e1 aa0103e0 (f9400821)

The jffs2_do_clear_inode() call in jffs2_iget() is unnecessary since
iget_failed() will eventually call jffs2_do_clear_inode() if needed, so
just remove it.

Fixes: 5451f79f5f81 ("iget: stop JFFS2 from using iget() and read_inode()")
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jake Daryll Obina <jake.obina@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/jffs2/fs.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index d8c274d39ddb..eab04eca95a3 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -362,7 +362,6 @@ error_io:
 	ret = -EIO;
 error:
 	mutex_unlock(&f->sem);
-	jffs2_do_clear_inode(c, f);
 	iget_failed(inode);
 	return ERR_PTR(ret);
 }
-- 
2.15.1

[PATCH AUTOSEL for 4.15 097/189] ixgbe: don't set RXDCTL.RLPML for 82599

[Sasha Levin]

From: Emil Tantilov <emil.s.tantilov@intel.com>

[ Upstream commit 2bafa8fac19a31ca72ae1a3e48df35f73661dbed ]

commit 2de6aa3a666e ("ixgbe: Add support for padding packet")

Uses RXDCTL.RLPML to limit the maximum frame size on Rx when using
build_skb. Unfortunately that register does not work on 82599.

Added an explicit check to avoid setting this register on 82599 MAC.

Extended the comment related to the setting of RXDCTL.RLPML to better
explain its purpose.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index a7113e702f58..a549c4870882 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4120,11 +4120,15 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
 		rxdctl &= ~0x3FFFFF;
 		rxdctl |=  0x080420;
 #if (PAGE_SIZE < 8192)
-	} else {
+	/* RXDCTL.RLPML does not work on 82599 */
+	} else if (hw->mac.type != ixgbe_mac_82599EB) {
 		rxdctl &= ~(IXGBE_RXDCTL_RLPMLMASK |
 			    IXGBE_RXDCTL_RLPML_EN);
 
-		/* Limit the maximum frame size so we don't overrun the skb */
+		/* Limit the maximum frame size so we don't overrun the skb.
+		 * This can happen in SRIOV mode when the MTU of the VF is
+		 * higher than the MTU of the PF.
+		 */
 		if (ring_uses_build_skb(ring) &&
 		    !test_bit(__IXGBE_RX_3K_BUFFER, &ring->state))
 			rxdctl |= IXGBE_MAX_2K_FRAME_BUILD_SKB |
-- 
2.15.1

[PATCH AUTOSEL for 4.15 098/189] i40e: program fragmented IPv4 filter input set

[Sasha Levin]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 02b4016bfe43d2d5ed043be7ffa56cda6a4d1100 ]

When implementing support for IP_USER_FLOW filters, we correctly
programmed a filter for both the non fragmented IPv4/Other filter, as
well as the fragmented IPv4 filters. However, we did not properly
program the input set for fragmented IPv4 PCTYPE. This meant that the
filters would almost certainly not match, unless the user specified all
of the flow types.

Add support to program the fragmented IPv4 filter input set. Since we
always program these filters together, we'll assume that the two input
sets must match, and will thus always program the input sets to the same
value.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 10 ++++++++++
 drivers/net/ethernet/intel/i40e/i40e_main.c    |  3 +++
 2 files changed, 13 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 5f6cf7212d4f..28daf7e7ccbe 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -3800,6 +3800,16 @@ static int i40e_check_fdir_input_set(struct i40e_vsi *vsi,
 
 	i40e_write_fd_input_set(pf, index, new_mask);
 
+	/* IP_USER_FLOW filters match both IPv4/Other and IPv4/Fragmented
+	 * frames. If we're programming the input set for IPv4/Other, we also
+	 * need to program the IPv4/Fragmented input set. Since we don't have
+	 * separate support, we'll always assume and enforce that the two flow
+	 * types must have matching input sets.
+	 */
+	if (index == I40E_FILTER_PCTYPE_NONF_IPV4_OTHER)
+		i40e_write_fd_input_set(pf, I40E_FILTER_PCTYPE_FRAG_IPV4,
+					new_mask);
+
 	/* Add the new offset and update table, if necessary */
 	if (new_flex_offset) {
 		err = i40e_add_flex_offset(&pf->l4_flex_pit_list, src_offset,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 973bad818e81..2d9a50c82141 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -7744,6 +7744,9 @@ static void i40e_fdir_filter_exit(struct i40e_pf *pf)
 	/* Reprogram the default input set for Other/IPv4 */
 	i40e_write_fd_input_set(pf, I40E_FILTER_PCTYPE_NONF_IPV4_OTHER,
 				I40E_L3_SRC_MASK | I40E_L3_DST_MASK);
+
+	i40e_write_fd_input_set(pf, I40E_FILTER_PCTYPE_FRAG_IPV4,
+				I40E_L3_SRC_MASK | I40E_L3_DST_MASK);
 }
 
 /**
-- 
2.15.1

[PATCH AUTOSEL for 4.15 099/189] i40e: fix reported mask for ntuple filters

[Sasha Levin]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 40339af33c703bacb336493157d43c86a8bf2fed ]

In commit 36777d9fa24c ("i40e: check current configured input set when
adding ntuple filters") some code was added to report the input set
mask for a given filter when reporting it to the user.

This code is necessary so that the reported filter correctly displays
that it is or is not masking certain fields.

Unfortunately the code was incorrect. Development error accidentally
swapped the mask values for the IPv4 addresses with the L4 port numbers.
The port numbers are only 16bits wide while IPv4 addresses are 32 bits.
Unfortunately we assigned only 16 bits to the IPv4 address masks.
Additionally we assigned 32bit value 0xFFFFFFF to the TCP port numbers.
This second part does not matter as the value would be truncated to
16bits regardless, but it is unnecessary.

Fix the reported masks to properly report that the entire field is
masked.

Fixes: 36777d9fa24c ("i40e: check current configured input set when adding ntuple filters")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 28daf7e7ccbe..040e0dc6cb7a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -2740,16 +2740,16 @@ static int i40e_get_ethtool_fdir_entry(struct i40e_pf *pf,
 
 no_input_set:
 	if (input_set & I40E_L3_SRC_MASK)
-		fsp->m_u.tcp_ip4_spec.ip4src = htonl(0xFFFF);
+		fsp->m_u.tcp_ip4_spec.ip4src = htonl(0xFFFFFFFF);
 
 	if (input_set & I40E_L3_DST_MASK)
-		fsp->m_u.tcp_ip4_spec.ip4dst = htonl(0xFFFF);
+		fsp->m_u.tcp_ip4_spec.ip4dst = htonl(0xFFFFFFFF);
 
 	if (input_set & I40E_L4_SRC_MASK)
-		fsp->m_u.tcp_ip4_spec.psrc = htons(0xFFFFFFFF);
+		fsp->m_u.tcp_ip4_spec.psrc = htons(0xFFFF);
 
 	if (input_set & I40E_L4_DST_MASK)
-		fsp->m_u.tcp_ip4_spec.pdst = htons(0xFFFFFFFF);
+		fsp->m_u.tcp_ip4_spec.pdst = htons(0xFFFF);
 
 	if (rule->dest_ctl == I40E_FILTER_PROGRAM_DESC_DEST_DROP_PACKET)
 		fsp->ring_cookie = RX_CLS_FLOW_DISC;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 100/189] samples/bpf: Partially fixes the bpf.o build

[Sasha Levin]

From: Mickaël Salaün <mic@digikod.net>

[ Upstream commit c25ef6a5e62fa212d298ce24995ce239f29b5f96 ]

Do not build lib/bpf/bpf.o with this Makefile but use the one from the
library directory.  This avoid making a buggy bpf.o file (e.g. missing
symbols).

This patch is useful if some code (e.g. Landlock tests) needs both the
bpf.o (from tools/lib/bpf) and the bpf_load.o (from samples/bpf).

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 samples/bpf/Makefile | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index adeaa1302f34..961b45c5eee0 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -192,13 +192,16 @@ CLANG_ARCH_ARGS = -target $(ARCH)
 endif
 
 # Trick to allow make to be run from this directory
-all:
+all: $(LIBBPF)
 	$(MAKE) -C ../../ $(CURDIR)/
 
 clean:
 	$(MAKE) -C ../../ M=$(CURDIR) clean
 	@rm -f *~
 
+$(LIBBPF): FORCE
+	$(MAKE) -C $(dir $@) $(notdir $@)
+
 $(obj)/syscall_nrs.s:	$(src)/syscall_nrs.c
 	$(call if_changed_dep,cc_s_c)
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 101/189] powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes

[Sasha Levin]

From: Michael Bringmann <mwb@linux.vnet.ibm.com>

[ Upstream commit a346137e9142b039fd13af2e59696e3d40c487ef ]

On powerpc systems which allow 'hot-add' of CPU or memory resources,
it may occur that the new resources are to be inserted into nodes that
were not used for these resources at bootup. In the kernel, any node
that is used must be defined and initialized. These empty nodes may
occur when,

* Dedicated vs. shared resources. Shared resources require information
  such as the VPHN hcall for CPU assignment to nodes. Associativity
  decisions made based on dedicated resource rules, such as
  associativity properties in the device tree, may vary from decisions
  made using the values returned by the VPHN hcall.

* memoryless nodes at boot. Nodes need to be defined as 'possible' at
  boot for operation with other code modules. Previously, the powerpc
  code would limit the set of possible nodes to those which have
  memory assigned at boot, and were thus online. Subsequent add/remove
  of CPUs or memory would only work with this subset of possible
  nodes.

* memoryless nodes with CPUs at boot. Due to the previous restriction
  on nodes, nodes that had CPUs but no memory were being collapsed
  into other nodes that did have memory at boot. In practice this
  meant that the node assignment presented by the runtime kernel
  differed from the affinity and associativity attributes presented by
  the device tree or VPHN hcalls. Nodes that might be known to the
  pHyp were not 'possible' in the runtime kernel because they did not
  have memory at boot.

This patch ensures that sufficient nodes are defined to support
configuration requirements after boot, as well as at boot. This patch
set fixes a couple of problems.

* Nodes known to powerpc to be memoryless at boot, but to have CPUs in
  them are allowed to be 'possible' and 'online'. Memory allocations
  for those nodes are taken from another node that does have memory
  until and if memory is hot-added to the node. * Nodes which have no
  resources assigned at boot, but which may still be referenced
  subsequently by affinity or associativity attributes, are kept in
  the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs
  to the system can reference these nodes and bring them online
  instead of redirecting to one of the set of nodes that were known to
  have memory at boot.

This patch extracts the value of the lowest domain level (number of
allocable resources) from the device tree property
"ibm,max-associativity-domains" to use as the maximum number of nodes
to setup as possibly available in the system. This new setting will
override the instruction:

    nodes_and(node_possible_map, node_possible_map, node_online_map);

presently seen in the function arch/powerpc/mm/numa.c:initmem_init().

If the "ibm,max-associativity-domains" property is not present at
boot, no operation will be performed to define or enable additional
nodes, or enable the above 'nodes_and()'.

Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/mm/numa.c | 37 ++++++++++++++++++++++++++++++++++---
 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 09be66fcea68..87323354b247 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -887,6 +887,34 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
 	NODE_DATA(nid)->node_spanned_pages = spanned_pages;
 }
 
+static void __init find_possible_nodes(void)
+{
+	struct device_node *rtas;
+	u32 numnodes, i;
+
+	if (min_common_depth <= 0)
+		return;
+
+	rtas = of_find_node_by_path("/rtas");
+	if (!rtas)
+		return;
+
+	if (of_property_read_u32_index(rtas,
+				"ibm,max-associativity-domains",
+				min_common_depth, &numnodes))
+		goto out;
+
+	for (i = 0; i < numnodes; i++) {
+		if (!node_possible(i)) {
+			setup_node_data(i, 0, 0);
+			node_set(i, node_possible_map);
+		}
+	}
+
+out:
+	of_node_put(rtas);
+}
+
 void __init initmem_init(void)
 {
 	int nid, cpu;
@@ -900,12 +928,15 @@ void __init initmem_init(void)
 	memblock_dump_all();
 
 	/*
-	 * Reduce the possible NUMA nodes to the online NUMA nodes,
-	 * since we do not support node hotplug. This ensures that  we
-	 * lower the maximum NUMA node ID to what is actually present.
+	 * Modify the set of possible NUMA nodes to reflect information
+	 * available about the set of online nodes, and the set of nodes
+	 * that we expect to make use of for this platform's affinity
+	 * calculations.
 	 */
 	nodes_and(node_possible_map, node_possible_map, node_online_map);
 
+	find_possible_nodes();
+
 	for_each_online_node(nid) {
 		unsigned long start_pfn, end_pfn;
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 102/189] powerpc/numa: Ensure nodes initialized for hotplug

[Sasha Levin]

From: Michael Bringmann <mwb@linux.vnet.ibm.com>

[ Upstream commit ea05ba7c559c8e5a5946c3a94a2a266e9a6680a6 ]

This patch fixes some problems encountered at runtime with
configurations that support memory-less nodes, or that hot-add CPUs
into nodes that are memoryless during system execution after boot. The
problems of interest include:

* Nodes known to powerpc to be memoryless at boot, but to have CPUs in
  them are allowed to be 'possible' and 'online'. Memory allocations
  for those nodes are taken from another node that does have memory
  until and if memory is hot-added to the node.

* Nodes which have no resources assigned at boot, but which may still
  be referenced subsequently by affinity or associativity attributes,
  are kept in the list of 'possible' nodes for powerpc. Hot-add of
  memory or CPUs to the system can reference these nodes and bring
  them online instead of redirecting the references to one of the set
  of nodes known to have memory at boot.

Note that this software operates under the context of CPU hotplug. We
are not doing memory hotplug in this code, but rather updating the
kernel's CPU topology (i.e. arch_update_cpu_topology /
numa_update_cpu_topology). We are initializing a node that may be used
by CPUs or memory before it can be referenced as invalid by a CPU
hotplug operation. CPU hotplug operations are protected by a range of
APIs including cpu_maps_update_begin/cpu_maps_update_done,
cpus_read/write_lock / cpus_read/write_unlock, device locks, and more.
Memory hotplug operations, including try_online_node, are protected by
mem_hotplug_begin/mem_hotplug_done, device locks, and more. In the
case of CPUs being hot-added to a previously memoryless node, the
try_online_node operation occurs wholly within the CPU locks with no
overlap. Using HMC hot-add/hot-remove operations, we have been able to
add and remove CPUs to any possible node without failures. HMC
operations involve a degree self-serialization, though.

Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/mm/numa.c | 47 +++++++++++++++++++++++++++++++++++++----------
 1 file changed, 37 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 87323354b247..c6ec7ea312e8 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -546,7 +546,7 @@ static int numa_setup_cpu(unsigned long lcpu)
 	nid = of_node_to_nid_single(cpu);
 
 out_present:
-	if (nid < 0 || !node_online(nid))
+	if (nid < 0 || !node_possible(nid))
 		nid = first_online_node;
 
 	map_cpu_to_node(lcpu, nid);
@@ -905,10 +905,8 @@ static void __init find_possible_nodes(void)
 		goto out;
 
 	for (i = 0; i < numnodes; i++) {
-		if (!node_possible(i)) {
-			setup_node_data(i, 0, 0);
+		if (!node_possible(i))
 			node_set(i, node_possible_map);
-		}
 	}
 
 out:
@@ -1304,6 +1302,40 @@ static long vphn_get_associativity(unsigned long cpu,
 	return rc;
 }
 
+static inline int find_and_online_cpu_nid(int cpu)
+{
+	__be32 associativity[VPHN_ASSOC_BUFSIZE] = {0};
+	int new_nid;
+
+	/* Use associativity from first thread for all siblings */
+	vphn_get_associativity(cpu, associativity);
+	new_nid = associativity_to_nid(associativity);
+	if (new_nid < 0 || !node_possible(new_nid))
+		new_nid = first_online_node;
+
+	if (NODE_DATA(new_nid) == NULL) {
+#ifdef CONFIG_MEMORY_HOTPLUG
+		/*
+		 * Need to ensure that NODE_DATA is initialized for a node from
+		 * available memory (see memblock_alloc_try_nid). If unable to
+		 * init the node, then default to nearest node that has memory
+		 * installed.
+		 */
+		if (try_online_node(new_nid))
+			new_nid = first_online_node;
+#else
+		/*
+		 * Default to using the nearest node that has memory installed.
+		 * Otherwise, it would be necessary to patch the kernel MM code
+		 * to deal with more memoryless-node error conditions.
+		 */
+		new_nid = first_online_node;
+#endif
+	}
+
+	return new_nid;
+}
+
 /*
  * Update the CPU maps and sysfs entries for a single CPU when its NUMA
  * characteristics change. This function doesn't perform any locking and is
@@ -1371,7 +1403,6 @@ int numa_update_cpu_topology(bool cpus_locked)
 {
 	unsigned int cpu, sibling, changed = 0;
 	struct topology_update_data *updates, *ud;
-	__be32 associativity[VPHN_ASSOC_BUFSIZE] = {0};
 	cpumask_t updated_cpus;
 	struct device *dev;
 	int weight, new_nid, i = 0;
@@ -1409,11 +1440,7 @@ int numa_update_cpu_topology(bool cpus_locked)
 			continue;
 		}
 
-		/* Use associativity from first thread for all siblings */
-		vphn_get_associativity(cpu, associativity);
-		new_nid = associativity_to_nid(associativity);
-		if (new_nid < 0 || !node_online(new_nid))
-			new_nid = first_online_node;
+		new_nid = find_and_online_cpu_nid(cpu);
 
 		if (new_nid == numa_cpu_lookup_table[cpu]) {
 			cpumask_andnot(&cpu_associativity_changes_mask,
-- 
2.15.1

[PATCH AUTOSEL for 4.15 103/189] RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure

[Sasha Levin]

From: Leon Romanovsky <leonro@mellanox.com>

[ Upstream commit b081808a66345ba725b77ecd8d759bee874cd937 ]

Failure in XRCD FW deallocation command leaves memory leaked and
returns error to the user which he can't do anything about it.

This patch changes behavior to always free memory and always return
success to the user.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/mlx5/qp.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index 47b39c3e9812..d28f5662cf90 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -4694,13 +4694,10 @@ int mlx5_ib_dealloc_xrcd(struct ib_xrcd *xrcd)
 	int err;
 
 	err = mlx5_core_xrcd_dealloc(dev->mdev, xrcdn);
-	if (err) {
+	if (err)
 		mlx5_ib_warn(dev, "failed to dealloc xrcdn 0x%x\n", xrcdn);
-		return err;
-	}
 
 	kfree(xrcd);
-
 	return 0;
 }
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 104/189] NTB: ntb_hw_switchtec: Fix peer BAR bug in switchtec_ntb_init_shared_mw

[Sasha Levin]

From: Doug Meyer <dmeyer@gigaio.com>

[ Upstream commit 140eb5227767c6754742020a16d2691222b9c19b ]

This resolves a bug which may incorrectly configure the peer host's
LUT for shared memory window access. The code was using the local
host's first BAR number, rather than the peer hosts's first BAR
number, to determine what peer NT control register to program.

The bug will cause the Switchtec NTB link to work only if both peers
have the same first NTB BAR configured. In all other configurations,
the link will not come up, failing silently.

When both hosts have the same first BAR, the configuration works only
because the first BAR numbers happent to be the same. When the hosts
do not have the same first BAR, then the LUT translation will not be
configured in the correct peer LUT and will not give the peer the
shared memory window access required for the link to operate.

Signed-off-by: Doug Meyer <dmeyer@gigaio.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Fixes: 678784a44ae8 ("NTB: switchtec_ntb: Initialize hardware for memory windows")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
index afe8ed6f3b23..ca0334a6b759 100644
--- a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
+++ b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
@@ -964,7 +964,8 @@ static void switchtec_ntb_init_shared(struct switchtec_ntb *sndev)
 static int switchtec_ntb_init_shared_mw(struct switchtec_ntb *sndev)
 {
 	struct ntb_ctrl_regs __iomem *ctl = sndev->mmio_peer_ctrl;
-	int bar = sndev->direct_mw_to_bar[0];
+	int self_bar = sndev->direct_mw_to_bar[0];
+	int peer_bar = sndev->peer_direct_mw_to_bar[0];
 	u32 ctl_val;
 	int rc;
 
@@ -985,12 +986,12 @@ static int switchtec_ntb_init_shared_mw(struct switchtec_ntb *sndev)
 	if (rc)
 		goto unalloc_and_exit;
 
-	ctl_val = ioread32(&ctl->bar_entry[bar].ctl);
+	ctl_val = ioread32(&ctl->bar_entry[peer_bar].ctl);
 	ctl_val &= 0xFF;
 	ctl_val |= NTB_CTRL_BAR_LUT_WIN_EN;
 	ctl_val |= ilog2(LUT_SIZE) << 8;
 	ctl_val |= (sndev->nr_lut_mw - 1) << 14;
-	iowrite32(ctl_val, &ctl->bar_entry[bar].ctl);
+	iowrite32(ctl_val, &ctl->bar_entry[peer_bar].ctl);
 
 	iowrite64((NTB_CTRL_LUT_EN | (sndev->self_partition << 1) |
 		   sndev->self_shared_dma),
@@ -1009,7 +1010,7 @@ static int switchtec_ntb_init_shared_mw(struct switchtec_ntb *sndev)
 		goto unalloc_and_exit;
 	}
 
-	sndev->peer_shared = pci_iomap(sndev->stdev->pdev, bar, LUT_SIZE);
+	sndev->peer_shared = pci_iomap(sndev->stdev->pdev, self_bar, LUT_SIZE);
 	if (!sndev->peer_shared) {
 		rc = -ENOMEM;
 		goto unalloc_and_exit;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 105/189] ntb_transport: Fix bug with max_mw_size parameter

[Sasha Levin]

From: Logan Gunthorpe <logang@deltatee.com>

[ Upstream commit cbd27448faff4843ac4b66cc71445a10623ff48d ]

When using the max_mw_size parameter of ntb_transport to limit the size of
the Memory windows, communication cannot be established and the queues
freeze.

This is because the mw_size that's reported to the peer is correctly
limited but the size used locally is not. So the MW is initialized
with a buffer smaller than the window but the TX side is using the
full window. This means the TX side will be writing to a region of the
window that points nowhere.

This is easily fixed by applying the same limit to tx_size in
ntb_transport_init_queue().

Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/ntb/ntb_transport.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c
index 045e3dd4750e..9878c48826e3 100644
--- a/drivers/ntb/ntb_transport.c
+++ b/drivers/ntb/ntb_transport.c
@@ -1003,6 +1003,9 @@ static int ntb_transport_init_queue(struct ntb_transport_ctx *nt,
 	mw_base = nt->mw_vec[mw_num].phys_addr;
 	mw_size = nt->mw_vec[mw_num].phys_size;
 
+	if (max_mw_size && mw_size > max_mw_size)
+		mw_size = max_mw_size;
+
 	tx_size = (unsigned int)mw_size / num_qps_mw;
 	qp_offset = tx_size * (qp_num / mw_count);
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 106/189] ntb_hw_switchtec: Check for alignment of the buffer in mw_set_trans()

[Sasha Levin]

From: Logan Gunthorpe <logang@deltatee.com>

[ Upstream commit 1e2fd202f8593985cdadca32e0c322f98e7fe7cb ]

With Switchtec hardware, the buffer used for a memory window must be
aligned to its size (the hardware only replaces the lower bits). In
certain circumstances dma_alloc_coherent() will not provide a buffer
that adheres to this requirement like when using the CMA and
CONFIG_CMA_ALIGNMENT is set lower than the buffer size.

When we get an unaligned buffer mw_set_trans() should return an error.
We also log an error so we know the cause of the problem.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
index ca0334a6b759..fc9ce0a31c04 100644
--- a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
+++ b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
@@ -315,6 +315,19 @@ static int switchtec_ntb_mw_set_trans(struct ntb_dev *ntb, int pidx, int widx,
 	if (xlate_pos < 12)
 		return -EINVAL;
 
+	if (!IS_ALIGNED(addr, BIT_ULL(xlate_pos))) {
+		/*
+		 * In certain circumstances we can get a buffer that is
+		 * not aligned to its size. (Most of the time
+		 * dma_alloc_coherent ensures this). This can happen when
+		 * using large buffers allocated by the CMA
+		 * (see CMA_CONFIG_ALIGNMENT)
+		 */
+		dev_err(&sndev->stdev->dev,
+			"ERROR: Memory window address is not aligned to it's size!\n");
+		return -EINVAL;
+	}
+
 	rc = switchtec_ntb_part_op(sndev, ctl, NTB_CTRL_PART_OP_LOCK,
 				   NTB_CTRL_PART_STATUS_LOCKED);
 	if (rc)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 107/189] gianfar: prevent integer wrapping in the rx handler

[Sasha Levin]

From: Andy Spencer <aspencer@spacex.com>

[ Upstream commit 202a0a70e445caee1d0ec7aae814e64b1189fa4d ]

When the frame check sequence (FCS) is split across the last two frames
of a fragmented packet, part of the FCS gets counted twice, once when
subtracting the FCS, and again when subtracting the previously received
data.

For example, if 1602 bytes are received, and the first fragment contains
the first 1600 bytes (including the first two bytes of the FCS), and the
second fragment contains the last two bytes of the FCS:

  'skb->len == 1600' from the first fragment

  size  = lstatus & BD_LENGTH_MASK; # 1602
  size -= ETH_FCS_LEN;              # 1598
  size -= skb->len;                 # -2

Since the size is unsigned, it wraps around and causes a BUG later in
the packet handling, as shown below:

  kernel BUG at ./include/linux/skbuff.h:2068!
  Oops: Exception in kernel mode, sig: 5 [#1]
  ...
  NIP [c021ec60] skb_pull+0x24/0x44
  LR [c01e2fbc] gfar_clean_rx_ring+0x498/0x690
  Call Trace:
  [df7edeb0] [c01e2c1c] gfar_clean_rx_ring+0xf8/0x690 (unreliable)
  [df7edf20] [c01e33a8] gfar_poll_rx_sq+0x3c/0x9c
  [df7edf40] [c023352c] net_rx_action+0x21c/0x274
  [df7edf90] [c0329000] __do_softirq+0xd8/0x240
  [df7edff0] [c000c108] call_do_irq+0x24/0x3c
  [c0597e90] [c00041dc] do_IRQ+0x64/0xc4
  [c0597eb0] [c000d920] ret_from_except+0x0/0x18
  --- interrupt: 501 at arch_cpu_idle+0x24/0x5c

Change the size to a signed integer and then trim off any part of the
FCS that was received prior to the last fragment.

Fixes: 6c389fc931bc ("gianfar: fix size of scatter-gathered frames")
Signed-off-by: Andy Spencer <aspencer@spacex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/freescale/gianfar.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 7f837006bb6a..3bdeb295514b 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -2932,7 +2932,7 @@ static irqreturn_t gfar_transmit(int irq, void *grp_id)
 static bool gfar_add_rx_frag(struct gfar_rx_buff *rxb, u32 lstatus,
 			     struct sk_buff *skb, bool first)
 {
-	unsigned int size = lstatus & BD_LENGTH_MASK;
+	int size = lstatus & BD_LENGTH_MASK;
 	struct page *page = rxb->page;
 	bool last = !!(lstatus & BD_LFLAG(RXBD_LAST));
 
@@ -2947,11 +2947,16 @@ static bool gfar_add_rx_frag(struct gfar_rx_buff *rxb, u32 lstatus,
 		if (last)
 			size -= skb->len;
 
-		/* in case the last fragment consisted only of the FCS */
+		/* Add the last fragment if it contains something other than
+		 * the FCS, otherwise drop it and trim off any part of the FCS
+		 * that was already received.
+		 */
 		if (size > 0)
 			skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
 					rxb->page_offset + RXBUF_ALIGNMENT,
 					size, GFAR_RXB_TRUESIZE);
+		else if (size < 0)
+			pskb_trim(skb, skb->len + size);
 	}
 
 	/* try reuse page */
-- 
2.15.1

[PATCH AUTOSEL for 4.15 108/189] ibmvnic: Wait for device response when changing MAC

[Sasha Levin]

From: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>

[ Upstream commit f813614f531114db796ad66ced75c5dc8db7aa3a ]

Wait for a response from the VNIC server before exiting after setting
the MAC address. The resolves an issue with bonding a VNIC client in
ALB or TLB modes. The bonding driver was changing the MAC address more
rapidly than the device could respond, causing the following errors.

"bond0: the hw address of slave eth2 is in use by the bond;
couldn't find a slave with a free hw address to give it
(this should not have happened)"

If the function waits until the change is finalized, these errors are
avoided.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index b65f5f3ac034..d4e87333bac2 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1543,15 +1543,19 @@ static int __ibmvnic_set_mac(struct net_device *netdev, struct sockaddr *p)
 	crq.change_mac_addr.first = IBMVNIC_CRQ_CMD;
 	crq.change_mac_addr.cmd = CHANGE_MAC_ADDR;
 	ether_addr_copy(&crq.change_mac_addr.mac_addr[0], addr->sa_data);
+
+	init_completion(&adapter->fw_done);
 	ibmvnic_send_crq(adapter, &crq);
+	wait_for_completion(&adapter->fw_done);
 	/* netdev->dev_addr is changed in handle_change_mac_rsp function */
-	return 0;
+	return adapter->fw_done_rc ? -EIO : 0;
 }
 
 static int ibmvnic_set_mac(struct net_device *netdev, void *p)
 {
 	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
 	struct sockaddr *addr = p;
+	int rc;
 
 	if (adapter->state == VNIC_PROBED) {
 		memcpy(&adapter->desired.mac, addr, sizeof(struct sockaddr));
@@ -1559,9 +1563,9 @@ static int ibmvnic_set_mac(struct net_device *netdev, void *p)
 		return 0;
 	}
 
-	__ibmvnic_set_mac(netdev, addr);
+	rc = __ibmvnic_set_mac(netdev, addr);
 
-	return 0;
+	return rc;
 }
 
 /**
@@ -3558,8 +3562,8 @@ static void handle_error_indication(union ibmvnic_crq *crq,
 		ibmvnic_reset(adapter, VNIC_RESET_NON_FATAL);
 }
 
-static void handle_change_mac_rsp(union ibmvnic_crq *crq,
-				  struct ibmvnic_adapter *adapter)
+static int handle_change_mac_rsp(union ibmvnic_crq *crq,
+				 struct ibmvnic_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 	struct device *dev = &adapter->vdev->dev;
@@ -3568,10 +3572,13 @@ static void handle_change_mac_rsp(union ibmvnic_crq *crq,
 	rc = crq->change_mac_addr_rsp.rc.code;
 	if (rc) {
 		dev_err(dev, "Error %ld in CHANGE_MAC_ADDR_RSP\n", rc);
-		return;
+		goto out;
 	}
 	memcpy(netdev->dev_addr, &crq->change_mac_addr_rsp.mac_addr[0],
 	       ETH_ALEN);
+out:
+	complete(&adapter->fw_done);
+	return rc;
 }
 
 static void handle_request_cap_rsp(union ibmvnic_crq *crq,
@@ -4031,7 +4038,7 @@ static void ibmvnic_handle_crq(union ibmvnic_crq *crq,
 		break;
 	case CHANGE_MAC_ADDR_RSP:
 		netdev_dbg(netdev, "Got MAC address change Response\n");
-		handle_change_mac_rsp(crq, adapter);
+		adapter->fw_done_rc = handle_change_mac_rsp(crq, adapter);
 		break;
 	case ERROR_INDICATION:
 		netdev_dbg(netdev, "Got Error Indication\n");
-- 
2.15.1

[PATCH AUTOSEL for 4.15 109/189] x86/hyperv: Check for required priviliges in hyperv_init()

[Sasha Levin]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 89a8f6d4904c8cf3ff8fee9fdaff392a6bbb8bf6 ]

In hyperv_init() its presumed that it always has access to VP index and
hypercall MSRs while according to the specification it should be checked if
it's allowed to access the corresponding MSRs before accessing them.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: devel@linuxdriverproject.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Cathy Avery <cavery@redhat.com>
Cc: Mohammed Gamal <mmorsy@redhat.com>
Link: https://lkml.kernel.org/r/20180124132337.30138-2-vkuznets@redhat.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/hyperv/hv_init.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 189a398290db..21f9d53d9f00 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -110,12 +110,19 @@ static int hv_cpu_init(unsigned int cpu)
  */
 void hyperv_init(void)
 {
-	u64 guest_id;
+	u64 guest_id, required_msrs;
 	union hv_x64_msr_hypercall_contents hypercall_msr;
 
 	if (x86_hyper_type != X86_HYPER_MS_HYPERV)
 		return;
 
+	/* Absolutely required MSRs */
+	required_msrs = HV_X64_MSR_HYPERCALL_AVAILABLE |
+		HV_X64_MSR_VP_INDEX_AVAILABLE;
+
+	if ((ms_hyperv.features & required_msrs) != required_msrs)
+		return;
+
 	/* Allocate percpu VP index */
 	hv_vp_index = kmalloc_array(num_possible_cpus(), sizeof(*hv_vp_index),
 				    GFP_KERNEL);
-- 
2.15.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL for 4.15 109/189] x86/hyperv: Check for required priviliges in hyperv_init()

[Sasha Levin]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 89a8f6d4904c8cf3ff8fee9fdaff392a6bbb8bf6 ]

In hyperv_init() its presumed that it always has access to VP index and
hypercall MSRs while according to the specification it should be checked if
it's allowed to access the corresponding MSRs before accessing them.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: devel@linuxdriverproject.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Cathy Avery <cavery@redhat.com>
Cc: Mohammed Gamal <mmorsy@redhat.com>
Link: https://lkml.kernel.org/r/20180124132337.30138-2-vkuznets@redhat.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/hyperv/hv_init.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 189a398290db..21f9d53d9f00 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -110,12 +110,19 @@ static int hv_cpu_init(unsigned int cpu)
  */
 void hyperv_init(void)
 {
-	u64 guest_id;
+	u64 guest_id, required_msrs;
 	union hv_x64_msr_hypercall_contents hypercall_msr;
 
 	if (x86_hyper_type != X86_HYPER_MS_HYPERV)
 		return;
 
+	/* Absolutely required MSRs */
+	required_msrs = HV_X64_MSR_HYPERCALL_AVAILABLE |
+		HV_X64_MSR_VP_INDEX_AVAILABLE;
+
+	if ((ms_hyperv.features & required_msrs) != required_msrs)
+		return;
+
 	/* Allocate percpu VP index */
 	hv_vp_index = kmalloc_array(num_possible_cpus(), sizeof(*hv_vp_index),
 				    GFP_KERNEL);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 111/189] netfilter: x_tables: fix pointer leaks to userspace

[Sasha Levin]

From: Dmitry Vyukov <dvyukov@google.com>

[ Upstream commit 1e98ffea5a8935ec040ab72299e349cb44b8defd ]

Several netfilter matches and targets put kernel pointers into
info objects, but don't set usersize in descriptors.
This leads to kernel pointer leaks if a match/target is set
and then read back to userspace.

Properly set usersize for these matches/targets.

Found with manual code inspection.

Fixes: ec2318904965 ("xtables: extend matches and targets with .usersize")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/netfilter/xt_IDLETIMER.c | 1 +
 net/netfilter/xt_LED.c       | 1 +
 net/netfilter/xt_limit.c     | 3 +--
 net/netfilter/xt_nfacct.c    | 1 +
 net/netfilter/xt_statistic.c | 1 +
 5 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/xt_IDLETIMER.c b/net/netfilter/xt_IDLETIMER.c
index 18b7412ab99a..1ac6600bfafd 100644
--- a/net/netfilter/xt_IDLETIMER.c
+++ b/net/netfilter/xt_IDLETIMER.c
@@ -255,6 +255,7 @@ static struct xt_target idletimer_tg __read_mostly = {
 	.family		= NFPROTO_UNSPEC,
 	.target		= idletimer_tg_target,
 	.targetsize     = sizeof(struct idletimer_tg_info),
+	.usersize	= offsetof(struct idletimer_tg_info, timer),
 	.checkentry	= idletimer_tg_checkentry,
 	.destroy        = idletimer_tg_destroy,
 	.me		= THIS_MODULE,
diff --git a/net/netfilter/xt_LED.c b/net/netfilter/xt_LED.c
index 18d3af5e1098..0fb2133165aa 100644
--- a/net/netfilter/xt_LED.c
+++ b/net/netfilter/xt_LED.c
@@ -198,6 +198,7 @@ static struct xt_target led_tg_reg __read_mostly = {
 	.family		= NFPROTO_UNSPEC,
 	.target		= led_tg,
 	.targetsize	= sizeof(struct xt_led_info),
+	.usersize	= offsetof(struct xt_led_info, internal_data),
 	.checkentry	= led_tg_check,
 	.destroy	= led_tg_destroy,
 	.me		= THIS_MODULE,
diff --git a/net/netfilter/xt_limit.c b/net/netfilter/xt_limit.c
index d27b5f1ea619..61403b77361c 100644
--- a/net/netfilter/xt_limit.c
+++ b/net/netfilter/xt_limit.c
@@ -193,9 +193,8 @@ static struct xt_match limit_mt_reg __read_mostly = {
 	.compatsize       = sizeof(struct compat_xt_rateinfo),
 	.compat_from_user = limit_mt_compat_from_user,
 	.compat_to_user   = limit_mt_compat_to_user,
-#else
-	.usersize         = offsetof(struct xt_rateinfo, prev),
 #endif
+	.usersize         = offsetof(struct xt_rateinfo, prev),
 	.me               = THIS_MODULE,
 };
 
diff --git a/net/netfilter/xt_nfacct.c b/net/netfilter/xt_nfacct.c
index cc0518fe598e..6f92d25590a8 100644
--- a/net/netfilter/xt_nfacct.c
+++ b/net/netfilter/xt_nfacct.c
@@ -62,6 +62,7 @@ static struct xt_match nfacct_mt_reg __read_mostly = {
 	.match      = nfacct_mt,
 	.destroy    = nfacct_mt_destroy,
 	.matchsize  = sizeof(struct xt_nfacct_match_info),
+	.usersize   = offsetof(struct xt_nfacct_match_info, nfacct),
 	.me         = THIS_MODULE,
 };
 
diff --git a/net/netfilter/xt_statistic.c b/net/netfilter/xt_statistic.c
index 11de55e7a868..8710fdba2ae2 100644
--- a/net/netfilter/xt_statistic.c
+++ b/net/netfilter/xt_statistic.c
@@ -84,6 +84,7 @@ static struct xt_match xt_statistic_mt_reg __read_mostly = {
 	.checkentry = statistic_mt_check,
 	.destroy    = statistic_mt_destroy,
 	.matchsize  = sizeof(struct xt_statistic_info),
+	.usersize   = offsetof(struct xt_statistic_info, master),
 	.me         = THIS_MODULE,
 };
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 110/189] riscv: disable SUM in the exception handler

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit fe9b842f72921fb18b93cf47a255f374289ef242 ]

The SUM bit is enabled at the beginning of the copy_{to,from}_user and
{get,put}_user routines, and cleared before they return.  But these user
copy helper can be interrupted by exceptions, in which case the SUM bit
will remain set, which leads to elevated privileges for the code running
in exception context, as that can now access userspace address space
unconditionally.  This frequently happens when the user copy routines
access freshly allocated user memory that hasn't been faulted in, and a
pagefault needs to be taken before the user copy routines can continue.

Fix this by unconditionally clearing SUM when the exception handler is
called - the restore code will automatically restore it based on the
saved value.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/riscv/kernel/entry.S | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
index 7404ec222406..87fc045be51f 100644
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -78,10 +78,13 @@ _save_context:
 	REG_S x31, PT_T6(sp)
 
 	/*
-	 * Disable FPU to detect illegal usage of
-	 * floating point in kernel space
+	 * Disable user-mode memory access as it should only be set in the
+	 * actual user copy routines.
+	 *
+	 * Disable the FPU to detect illegal usage of floating point in kernel
+	 * space.
 	 */
-	li t0, SR_FS
+	li t0, SR_SUM | SR_FS
 
 	REG_L s0, TASK_TI_USER_SP(tp)
 	csrrc s1, sstatus, t0
-- 
2.15.1

[PATCH AUTOSEL for 4.15 112/189] tcp_nv: fix potential integer overflow in tcpnv_acked

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit e4823fbd229bfbba368b40cdadb8f4eeb20604cc ]

Add suffix ULL to constant 80000 in order to avoid a potential integer
overflow and give the compiler complete information about the proper
arithmetic to use. Notice that this constant is used in a context that
expects an expression of type u64.

The current cast to u64 effectively applies to the whole expression
as an argument of type u64 to be passed to div64_u64, but it does
not prevent it from being evaluated using 32-bit arithmetic instead
of 64-bit arithmetic.

Also, once the expression is properly evaluated using 64-bit arithmentic,
there is no need for the parentheses and the external cast to u64.

Addresses-Coverity-ID: 1357588 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/ipv4/tcp_nv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_nv.c b/net/ipv4/tcp_nv.c
index 0b5a05bd82e3..d18f4672beae 100644
--- a/net/ipv4/tcp_nv.c
+++ b/net/ipv4/tcp_nv.c
@@ -364,7 +364,7 @@ static void tcpnv_acked(struct sock *sk, const struct ack_sample *sample)
 		 */
 		cwnd_by_slope = (u32)
 			div64_u64(((u64)ca->nv_rtt_max_rate) * ca->nv_min_rtt,
-				  (u64)(80000 * tp->mss_cache));
+				  80000ULL * tp->mss_cache);
 		max_win = cwnd_by_slope + nv_pad;
 
 		/* If cwnd > max_win, decrease cwnd
-- 
2.15.1

[PATCH AUTOSEL for 4.15 113/189] kvm: Map PFN-type memory regions as writable (if possible)

[Sasha Levin]

From: KarimAllah Ahmed <karahmed@amazon.de>

[ Upstream commit a340b3e229b24a56f1c7f5826b15a3af0f4b13e5 ]

For EPT-violations that are triggered by a read, the pages are also mapped with
write permissions (if their memory region is also writable). That would avoid
getting yet another fault on the same page when a write occurs.

This optimization only happens when you have a "struct page" backing the memory
region. So also enable it for memory regions that do not have a "struct page".

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 virt/kvm/kvm_main.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index e536977e7b6d..234d03abcb75 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -1433,7 +1433,8 @@ static bool vma_is_valid(struct vm_area_struct *vma, bool write_fault)
 
 static int hva_to_pfn_remapped(struct vm_area_struct *vma,
 			       unsigned long addr, bool *async,
-			       bool write_fault, kvm_pfn_t *p_pfn)
+			       bool write_fault, bool *writable,
+			       kvm_pfn_t *p_pfn)
 {
 	unsigned long pfn;
 	int r;
@@ -1459,6 +1460,8 @@ static int hva_to_pfn_remapped(struct vm_area_struct *vma,
 
 	}
 
+	if (writable)
+		*writable = true;
 
 	/*
 	 * Get a reference here because callers of *hva_to_pfn* and
@@ -1524,7 +1527,7 @@ retry:
 	if (vma == NULL)
 		pfn = KVM_PFN_ERR_FAULT;
 	else if (vma->vm_flags & (VM_IO | VM_PFNMAP)) {
-		r = hva_to_pfn_remapped(vma, addr, async, write_fault, &pfn);
+		r = hva_to_pfn_remapped(vma, addr, async, write_fault, writable, &pfn);
 		if (r == -EAGAIN)
 			goto retry;
 		if (r < 0)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 114/189] x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested

[Sasha Levin]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit d391f1207067268261add0485f0f34503539c5b0 ]

I was investigating an issue with seabios >= 1.10 which stopped working
for nested KVM on Hyper-V. The problem appears to be in
handle_ept_violation() function: when we do fast mmio we need to skip
the instruction so we do kvm_skip_emulated_instruction(). This, however,
depends on VM_EXIT_INSTRUCTION_LEN field being set correctly in VMCS.
However, this is not the case.

Intel's manual doesn't mandate VM_EXIT_INSTRUCTION_LEN to be set when
EPT MISCONFIG occurs. While on real hardware it was observed to be set,
some hypervisors follow the spec and don't set it; we end up advancing
IP with some random value.

I checked with Microsoft and they confirmed they don't fill
VM_EXIT_INSTRUCTION_LEN on EPT MISCONFIG.

Fix the issue by doing instruction skip through emulator when running
nested.

Fixes: 68c3b4d1676d870f0453c31d5a52e7e65c7448ae
Suggested-by: Radim Krčmář <rkrcmar@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kvm/vmx.c | 16 +++++++++++++++-
 arch/x86/kvm/x86.c |  3 ++-
 2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 2beb77c319e8..8645c1f69944 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -6769,7 +6769,21 @@ static int handle_ept_misconfig(struct kvm_vcpu *vcpu)
 	if (!is_guest_mode(vcpu) &&
 	    !kvm_io_bus_write(vcpu, KVM_FAST_MMIO_BUS, gpa, 0, NULL)) {
 		trace_kvm_fast_mmio(gpa);
-		return kvm_skip_emulated_instruction(vcpu);
+		/*
+		 * Doing kvm_skip_emulated_instruction() depends on undefined
+		 * behavior: Intel's manual doesn't mandate
+		 * VM_EXIT_INSTRUCTION_LEN to be set in VMCS when EPT MISCONFIG
+		 * occurs and while on real hardware it was observed to be set,
+		 * other hypervisors (namely Hyper-V) don't set it, we end up
+		 * advancing IP with some random value. Disable fast mmio when
+		 * running nested and keep it for real hardware in hope that
+		 * VM_EXIT_INSTRUCTION_LEN will always be set correctly.
+		 */
+		if (!static_cpu_has(X86_FEATURE_HYPERVISOR))
+			return kvm_skip_emulated_instruction(vcpu);
+		else
+			return x86_emulate_instruction(vcpu, gpa, EMULTYPE_SKIP,
+						       NULL, 0) == EMULATE_DONE;
 	}
 
 	ret = kvm_mmu_page_fault(vcpu, gpa, PFERR_RSVD_MASK, NULL, 0);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 41a8ac44d5cc..b125f5c91b94 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -5711,7 +5711,8 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu,
 		 * handle watchpoints yet, those would be handled in
 		 * the emulate_ops.
 		 */
-		if (kvm_vcpu_check_breakpoint(vcpu, &r))
+		if (!(emulation_type & EMULTYPE_SKIP) &&
+		    kvm_vcpu_check_breakpoint(vcpu, &r))
 			return r;
 
 		ctxt->interruptibility = 0;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 115/189] fs/dax.c: release PMD lock even when there is no PMD support in DAX

[Sasha Levin]

From: Jan H. Schönherr <jschoenh@amazon.de>

[ Upstream commit ee190ca6516bc8257e3d36187ca6f0f71a9ec477 ]

follow_pte_pmd() can theoretically return after having acquired a PMD
lock, even when DAX was not compiled with CONFIG_FS_DAX_PMD.

Release the PMD lock unconditionally.

Link: http://lkml.kernel.org/r/20180118133839.20587-1-jschoenh@amazon.de
Fixes: f729c8c9b24f ("dax: wrprotect pmd_t in dax_mapping_entry_mkclean")
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/dax.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/dax.c b/fs/dax.c
index 95981591977a..c2ebf10b70da 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -636,8 +636,8 @@ static void dax_mapping_entry_mkclean(struct address_space *mapping,
 			pmd = pmd_mkclean(pmd);
 			set_pmd_at(vma->vm_mm, address, pmdp, pmd);
 unlock_pmd:
-			spin_unlock(ptl);
 #endif
+			spin_unlock(ptl);
 		} else {
 			if (pfn != pte_pfn(*ptep))
 				goto unlock_pte;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 116/189] ocfs2: return -EROFS to mount.ocfs2 if inode block is invalid

[Sasha Levin]

From: piaojun <piaojun@huawei.com>

[ Upstream commit 025bcbde3634b2c9b316f227fed13ad6ad6817fb ]

If metadata is corrupted such as 'invalid inode block', we will get
failed by calling 'mount()' and then set filesystem readonly as below:

  ocfs2_mount
    ocfs2_initialize_super
      ocfs2_init_global_system_inodes
        ocfs2_iget
          ocfs2_read_locked_inode
            ocfs2_validate_inode_block
	      ocfs2_error
	        ocfs2_handle_error
	          ocfs2_set_ro_flag(osb, 0);  // set readonly

In this situation we need return -EROFS to 'mount.ocfs2', so that user
can fix it by fsck.  And then mount again.  In addition, 'mount.ocfs2'
should be updated correspondingly as it only return 1 for all errno.
And I will post a patch for 'mount.ocfs2' too.

Link: http://lkml.kernel.org/r/5A4302FA.2010606@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/ocfs2/super.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 80efa5699fb0..63b3fa519758 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -474,9 +474,8 @@ static int ocfs2_init_global_system_inodes(struct ocfs2_super *osb)
 		new = ocfs2_get_system_file_inode(osb, i, osb->slot_num);
 		if (!new) {
 			ocfs2_release_system_inodes(osb);
-			status = -EINVAL;
+			status = ocfs2_is_soft_readonly(osb) ? -EROFS : -EINVAL;
 			mlog_errno(status);
-			/* FIXME: Should ERROR_RO_FS */
 			mlog(ML_ERROR, "Unable to load system inode %d, "
 			     "possibly corrupt fs?", i);
 			goto bail;
@@ -505,7 +504,7 @@ static int ocfs2_init_local_system_inodes(struct ocfs2_super *osb)
 		new = ocfs2_get_system_file_inode(osb, i, osb->slot_num);
 		if (!new) {
 			ocfs2_release_system_inodes(osb);
-			status = -EINVAL;
+			status = ocfs2_is_soft_readonly(osb) ? -EROFS : -EINVAL;
 			mlog(ML_ERROR, "status=%d, sysfile=%d, slot=%d\n",
 			     status, i, osb->slot_num);
 			goto bail;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 117/189] ocfs2/acl: use 'ip_xattr_sem' to protect getting extended attribute

[Sasha Levin]

From: piaojun <piaojun@huawei.com>

[ Upstream commit 16c8d569f5704a84164f30ff01b29879f3438065 ]

The race between *set_acl and *get_acl will cause getting incomplete
xattr data as below:

  processA                                    processB

  ocfs2_set_acl
    ocfs2_xattr_set
      __ocfs2_xattr_set_handle

                                              ocfs2_get_acl_nolock
                                                ocfs2_xattr_get_nolock:

processB may get incomplete xattr data if processA hasn't set_acl done.

So we should use 'ip_xattr_sem' to protect getting extended attribute in
ocfs2_get_acl_nolock(), as other processes could be changing it
concurrently.

Link: http://lkml.kernel.org/r/5A5DDCFF.7030001@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/ocfs2/acl.c   | 6 ++++++
 fs/ocfs2/xattr.c | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
index 40b5cc97f7b0..917fadca8a7b 100644
--- a/fs/ocfs2/acl.c
+++ b/fs/ocfs2/acl.c
@@ -311,7 +311,9 @@ struct posix_acl *ocfs2_iop_get_acl(struct inode *inode, int type)
 	if (had_lock < 0)
 		return ERR_PTR(had_lock);
 
+	down_read(&OCFS2_I(inode)->ip_xattr_sem);
 	acl = ocfs2_get_acl_nolock(inode, type, di_bh);
+	up_read(&OCFS2_I(inode)->ip_xattr_sem);
 
 	ocfs2_inode_unlock_tracker(inode, 0, &oh, had_lock);
 	brelse(di_bh);
@@ -330,7 +332,9 @@ int ocfs2_acl_chmod(struct inode *inode, struct buffer_head *bh)
 	if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
 		return 0;
 
+	down_read(&OCFS2_I(inode)->ip_xattr_sem);
 	acl = ocfs2_get_acl_nolock(inode, ACL_TYPE_ACCESS, bh);
+	up_read(&OCFS2_I(inode)->ip_xattr_sem);
 	if (IS_ERR(acl) || !acl)
 		return PTR_ERR(acl);
 	ret = __posix_acl_chmod(&acl, GFP_KERNEL, inode->i_mode);
@@ -361,8 +365,10 @@ int ocfs2_init_acl(handle_t *handle,
 
 	if (!S_ISLNK(inode->i_mode)) {
 		if (osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL) {
+			down_read(&OCFS2_I(dir)->ip_xattr_sem);
 			acl = ocfs2_get_acl_nolock(dir, ACL_TYPE_DEFAULT,
 						   dir_bh);
+			up_read(&OCFS2_I(dir)->ip_xattr_sem);
 			if (IS_ERR(acl))
 				return PTR_ERR(acl);
 		}
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index c5898c59d411..e358f60f25f4 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -638,9 +638,11 @@ int ocfs2_calc_xattr_init(struct inode *dir,
 						     si->value_len);
 
 	if (osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL) {
+		down_read(&OCFS2_I(dir)->ip_xattr_sem);
 		acl_len = ocfs2_xattr_get_nolock(dir, dir_bh,
 					OCFS2_XATTR_INDEX_POSIX_ACL_DEFAULT,
 					"", NULL, 0);
+		up_read(&OCFS2_I(dir)->ip_xattr_sem);
 		if (acl_len > 0) {
 			a_size = ocfs2_xattr_entry_real_size(0, acl_len);
 			if (S_ISDIR(mode))
-- 
2.15.1

[PATCH AUTOSEL for 4.15 118/189] ocfs2: return error when we attempt to access a dirty bh in jbd2

[Sasha Levin]

From: piaojun <piaojun@huawei.com>

[ Upstream commit d984187e3a1ad7d12447a7ab2c43ce3717a2b5b3 ]

We should not reuse the dirty bh in jbd2 directly due to the following
situation:

1. When removing extent rec, we will dirty the bhs of extent rec and
   truncate log at the same time, and hand them over to jbd2.

2. The bhs are submitted to jbd2 area successfully.

3. The write-back thread of device help flush the bhs to disk but
   encounter write error due to abnormal storage link.

4. After a while the storage link become normal. Truncate log flush
   worker triggered by the next space reclaiming found the dirty bh of
   truncate log and clear its 'BH_Write_EIO' and then set it uptodate in
   __ocfs2_journal_access():

   ocfs2_truncate_log_worker
     ocfs2_flush_truncate_log
       __ocfs2_flush_truncate_log
         ocfs2_replay_truncate_records
           ocfs2_journal_access_di
             __ocfs2_journal_access // here we clear io_error and set 'tl_bh' uptodata.

5. Then jbd2 will flush the bh of truncate log to disk, but the bh of
   extent rec is still in error state, and unfortunately nobody will
   take care of it.

6. At last the space of extent rec was not reduced, but truncate log
   flush worker have given it back to globalalloc. That will cause
   duplicate cluster problem which could be identified by fsck.ocfs2.

Sadly we can hardly revert this but set fs read-only in case of ruining
atomicity and consistency of space reclaim.

Link: http://lkml.kernel.org/r/5A6E8092.8090701@huawei.com
Fixes: acf8fdbe6afb ("ocfs2: do not BUG if buffer not uptodate in __ocfs2_journal_access")
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/ocfs2/journal.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 36304434eacf..e5dcea6cee5f 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -666,23 +666,24 @@ static int __ocfs2_journal_access(handle_t *handle,
 	/* we can safely remove this assertion after testing. */
 	if (!buffer_uptodate(bh)) {
 		mlog(ML_ERROR, "giving me a buffer that's not uptodate!\n");
-		mlog(ML_ERROR, "b_blocknr=%llu\n",
-		     (unsigned long long)bh->b_blocknr);
+		mlog(ML_ERROR, "b_blocknr=%llu, b_state=0x%lx\n",
+		     (unsigned long long)bh->b_blocknr, bh->b_state);
 
 		lock_buffer(bh);
 		/*
-		 * A previous attempt to write this buffer head failed.
-		 * Nothing we can do but to retry the write and hope for
-		 * the best.
+		 * A previous transaction with a couple of buffer heads fail
+		 * to checkpoint, so all the bhs are marked as BH_Write_EIO.
+		 * For current transaction, the bh is just among those error
+		 * bhs which previous transaction handle. We can't just clear
+		 * its BH_Write_EIO and reuse directly, since other bhs are
+		 * not written to disk yet and that will cause metadata
+		 * inconsistency. So we should set fs read-only to avoid
+		 * further damage.
 		 */
 		if (buffer_write_io_error(bh) && !buffer_uptodate(bh)) {
-			clear_buffer_write_io_error(bh);
-			set_buffer_uptodate(bh);
-		}
-
-		if (!buffer_uptodate(bh)) {
 			unlock_buffer(bh);
-			return -EIO;
+			return ocfs2_error(osb->sb, "A previous attempt to "
+					"write this buffer head failed\n");
 		}
 		unlock_buffer(bh);
 	}
-- 
2.15.1

[PATCH AUTOSEL for 4.15 119/189] mm/mempolicy: fix the check of nodemask from user

[Sasha Levin]

From: Yisheng Xie <xieyisheng1@huawei.com>

[ Upstream commit 56521e7a02b7b84a5e72691a1fb15570e6055545 ]

As Xiaojun reported the ltp of migrate_pages01 will fail on arm64 system
which has 4 nodes[0...3], all have memory and CONFIG_NODES_SHIFT=2:

  migrate_pages01    0  TINFO  :  test_invalid_nodes
  migrate_pages01   14  TFAIL  :  migrate_pages_common.c:45: unexpected failure - returned value = 0, expected: -1
  migrate_pages01   15  TFAIL  :  migrate_pages_common.c:55: call succeeded unexpectedly

In this case the test_invalid_nodes of migrate_pages01 will call:
SYSC_migrate_pages as:

  migrate_pages(0, , {0x0000000000000001}, 64, , {0x0000000000000010}, 64) = 0

The new nodes specifies one or more node IDs that are greater than the
maximum supported node ID, however, the errno is not set to EINVAL as
expected.

As man pages of set_mempolicy[1], mbind[2], and migrate_pages[3]
mentioned, when nodemask specifies one or more node IDs that are greater
than the maximum supported node ID, the errno should set to EINVAL.
However, get_nodes only check whether the part of bits
[BITS_PER_LONG*BITS_TO_LONGS(MAX_NUMNODES), maxnode) is zero or not, and
remain [MAX_NUMNODES, BITS_PER_LONG*BITS_TO_LONGS(MAX_NUMNODES)
unchecked.

This patch is to check the bits of [MAX_NUMNODES, maxnode) in get_nodes
to let migrate_pages set the errno to EINVAL when nodemask specifies one
or more node IDs that are greater than the maximum supported node ID,
which follows the manpage's guide.

[1] http://man7.org/linux/man-pages/man2/set_mempolicy.2.html
[2] http://man7.org/linux/man-pages/man2/mbind.2.html
[3] http://man7.org/linux/man-pages/man2/migrate_pages.2.html

Link: http://lkml.kernel.org/r/1510882624-44342-3-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reported-by: Tan Xiaojun <tanxiaojun@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chris Salls <salls@cs.ucsb.edu>
Cc: Christopher Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 mm/mempolicy.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 4ce44d3ff03d..c9b807eca74c 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1263,6 +1263,7 @@ static int get_nodes(nodemask_t *nodes, const unsigned long __user *nmask,
 		     unsigned long maxnode)
 {
 	unsigned long k;
+	unsigned long t;
 	unsigned long nlongs;
 	unsigned long endmask;
 
@@ -1279,13 +1280,19 @@ static int get_nodes(nodemask_t *nodes, const unsigned long __user *nmask,
 	else
 		endmask = (1UL << (maxnode % BITS_PER_LONG)) - 1;
 
-	/* When the user specified more nodes than supported just check
-	   if the non supported part is all zero. */
+	/*
+	 * When the user specified more nodes than supported just check
+	 * if the non supported part is all zero.
+	 *
+	 * If maxnode have more longs than MAX_NUMNODES, check
+	 * the bits in that area first. And then go through to
+	 * check the rest bits which equal or bigger than MAX_NUMNODES.
+	 * Otherwise, just check bits [MAX_NUMNODES, maxnode).
+	 */
 	if (nlongs > BITS_TO_LONGS(MAX_NUMNODES)) {
 		if (nlongs > PAGE_SIZE/sizeof(long))
 			return -EINVAL;
 		for (k = BITS_TO_LONGS(MAX_NUMNODES); k < nlongs; k++) {
-			unsigned long t;
 			if (get_user(t, nmask + k))
 				return -EFAULT;
 			if (k == nlongs - 1) {
@@ -1298,6 +1305,16 @@ static int get_nodes(nodemask_t *nodes, const unsigned long __user *nmask,
 		endmask = ~0UL;
 	}
 
+	if (maxnode > MAX_NUMNODES && MAX_NUMNODES % BITS_PER_LONG != 0) {
+		unsigned long valid_mask = endmask;
+
+		valid_mask &= ~((1UL << (MAX_NUMNODES % BITS_PER_LONG)) - 1);
+		if (get_user(t, nmask + nlongs - 1))
+			return -EFAULT;
+		if (t & valid_mask)
+			return -EINVAL;
+	}
+
 	if (copy_from_user(nodes_addr(*nodes), nmask, nlongs*sizeof(unsigned long)))
 		return -EFAULT;
 	nodes_addr(*nodes)[nlongs-1] &= endmask;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 120/189] mm/mempolicy: add nodes_empty check in SYSC_migrate_pages

[Sasha Levin]

From: Yisheng Xie <xieyisheng1@huawei.com>

[ Upstream commit 0486a38bcc4749808edbc848f1bcf232042770fc ]

As in manpage of migrate_pages, the errno should be set to EINVAL when
none of the node IDs specified by new_nodes are on-line and allowed by
the process's current cpuset context, or none of the specified nodes
contain memory.  However, when test by following case:

	new_nodes = 0;
	old_nodes = 0xf;
	ret = migrate_pages(pid, old_nodes, new_nodes, MAX);

The ret will be 0 and no errno is set.  As the new_nodes is empty, we
should expect EINVAL as documented.

To fix the case like above, this patch check whether target nodes AND
current task_nodes is empty, and then check whether AND
node_states[N_MEMORY] is empty.

Link: http://lkml.kernel.org/r/1510882624-44342-4-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chris Salls <salls@cs.ucsb.edu>
Cc: Christopher Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 mm/mempolicy.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index c9b807eca74c..277b6454954e 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1435,10 +1435,14 @@ SYSCALL_DEFINE4(migrate_pages, pid_t, pid, unsigned long, maxnode,
 		goto out_put;
 	}
 
-	if (!nodes_subset(*new, node_states[N_MEMORY])) {
-		err = -EINVAL;
+	task_nodes = cpuset_mems_allowed(current);
+	nodes_and(*new, *new, task_nodes);
+	if (nodes_empty(*new))
+		goto out_put;
+
+	nodes_and(*new, *new, node_states[N_MEMORY]);
+	if (nodes_empty(*new))
 		goto out_put;
-	}
 
 	err = security_task_movememory(task);
 	if (err)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 121/189] asm-generic: provide generic_pmdp_establish()

[Sasha Levin]

From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>

[ Upstream commit c58f0bb77ed8bf93dfdde762b01cb67eebbdfc29 ]

Patch series "Do not lose dirty bit on THP pages", v4.

Vlastimil noted that pmdp_invalidate() is not atomic and we can lose
dirty and access bits if CPU sets them after pmdp dereference, but
before set_pmd_at().

The bug can lead to data loss, but the race window is tiny and I haven't
seen any reports that suggested that it happens in reality.  So I don't
think it worth sending it to stable.

Unfortunately, there's no way to address the issue in a generic way.  We
need to fix all architectures that support THP one-by-one.

All architectures that have THP supported have to provide atomic
pmdp_invalidate() that returns previous value.

If generic implementation of pmdp_invalidate() is used, architecture
needs to provide atomic pmdp_estabish().

pmdp_estabish() is not used out-side generic implementation of
pmdp_invalidate() so far, but I think this can change in the future.

This patch (of 12):

This is an implementation of pmdp_establish() that is only suitable for
an architecture that doesn't have hardware dirty/accessed bits.  In this
case we can't race with CPU which sets these bits and non-atomic
approach is fine.

Link: http://lkml.kernel.org/r/20171213105756.69879-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Daney <david.daney@cavium.com>
Cc: David Miller <davem@davemloft.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Nitin Gupta <nitin.m.gupta@oracle.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/asm-generic/pgtable.h | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index dfc861caa478..b891134abd39 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -309,6 +309,21 @@ extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
 extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
 #endif
 
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+/*
+ * This is an implementation of pmdp_establish() that is only suitable for an
+ * architecture that doesn't have hardware dirty/accessed bits. In this case we
+ * can't race with CPU which sets these bits and non-atomic aproach is fine.
+ */
+static inline pmd_t generic_pmdp_establish(struct vm_area_struct *vma,
+		unsigned long address, pmd_t *pmdp, pmd_t pmd)
+{
+	pmd_t old_pmd = *pmdp;
+	set_pmd_at(vma->vm_mm, address, pmdp, pmd);
+	return old_pmd;
+}
+#endif
+
 #ifndef __HAVE_ARCH_PMDP_INVALIDATE
 extern void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
 			    pmd_t *pmdp);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 122/189] sparc64: update pmdp_invalidate() to return old pmd value

[Sasha Levin]

From: Nitin Gupta <nitin.m.gupta@oracle.com>

[ Upstream commit a8e654f01cb725d0bfd741ebca1bf4c9337969cc ]

It's required to avoid losing dirty and accessed bits.

[akpm@linux-foundation.org: add a `do' to the do-while loop]
Link: http://lkml.kernel.org/r/20171213105756.69879-9-kirill.shutemov@linux.intel.com
Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/sparc/include/asm/pgtable_64.h |  2 +-
 arch/sparc/mm/tlb.c                 | 23 ++++++++++++++++++-----
 2 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index 9937c5ff94a9..339920fdf9ed 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -1010,7 +1010,7 @@ void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
 			  pmd_t *pmd);
 
 #define __HAVE_ARCH_PMDP_INVALIDATE
-extern void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
+extern pmd_t pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
 			    pmd_t *pmdp);
 
 #define __HAVE_ARCH_PGTABLE_DEPOSIT
diff --git a/arch/sparc/mm/tlb.c b/arch/sparc/mm/tlb.c
index 4ae86bc0d35c..847ddffbf38a 100644
--- a/arch/sparc/mm/tlb.c
+++ b/arch/sparc/mm/tlb.c
@@ -219,17 +219,28 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 	}
 }
 
+static inline pmd_t pmdp_establish(struct vm_area_struct *vma,
+		unsigned long address, pmd_t *pmdp, pmd_t pmd)
+{
+	pmd_t old;
+
+	do {
+		old = *pmdp;
+	} while (cmpxchg64(&pmdp->pmd, old.pmd, pmd.pmd) != old.pmd);
+
+	return old;
+}
+
 /*
  * This routine is only called when splitting a THP
  */
-void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
+pmd_t pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
 		     pmd_t *pmdp)
 {
-	pmd_t entry = *pmdp;
-
-	pmd_val(entry) &= ~_PAGE_VALID;
+	pmd_t old, entry;
 
-	set_pmd_at(vma->vm_mm, address, pmdp, entry);
+	entry = __pmd(pmd_val(*pmdp) & ~_PAGE_VALID);
+	old = pmdp_establish(vma, address, pmdp, entry);
 	flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
 
 	/*
@@ -240,6 +251,8 @@ void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
 	if ((pmd_val(entry) & _PAGE_PMD_HUGE) &&
 	    !is_huge_zero_page(pmd_page(entry)))
 		(vma->vm_mm)->context.thp_pte_count--;
+
+	return old;
 }
 
 void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
-- 
2.15.1

[PATCH AUTOSEL for 4.15 123/189] mm: thp: use down_read_trylock() in khugepaged to avoid long block

[Sasha Levin]

From: Yang Shi <yang.s@alibaba-inc.com>

[ Upstream commit 3b454ad35043dfbd3b5d2bb92b0991d6342afb44 ]

In the current design, khugepaged needs to acquire mmap_sem before
scanning an mm.  But in some corner cases, khugepaged may scan a process
which is modifying its memory mapping, so khugepaged blocks in
uninterruptible state.  But the process might hold the mmap_sem for a
long time when modifying a huge memory space and it may trigger the
below khugepaged hung issue:

  INFO: task khugepaged:270 blocked for more than 120 seconds.
  Tainted: G E 4.9.65-006.ali3000.alios7.x86_64 #1
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  khugepaged D 0 270 2 0x00000000 
  ffff883f3deae4c0 0000000000000000 ffff883f610596c0 ffff883f7d359440
  ffff883f63818000 ffffc90019adfc78 ffffffff817079a5 d67e5aa8c1860a64
  0000000000000246 ffff883f7d359440 ffffc90019adfc88 ffff883f610596c0
  Call Trace:
    schedule+0x36/0x80
    rwsem_down_read_failed+0xf0/0x150
    call_rwsem_down_read_failed+0x18/0x30
    down_read+0x20/0x40
    khugepaged+0x476/0x11d0
    kthread+0xe6/0x100
    ret_from_fork+0x25/0x30

So it sounds pointless to just block khugepaged waiting for the
semaphore so replace down_read() with down_read_trylock() to move to
scan the next mm quickly instead of just blocking on the semaphore so
that other processes can get more chances to install THP.  Then
khugepaged can come back to scan the skipped mm when it has finished the
current round full_scan.

And it appears that the change can improve khugepaged efficiency a
little bit.

Below is the test result when running LTP on a 24 cores 4GB memory 2
nodes NUMA VM:

                                    pristine          w/ trylock
  full_scan                         197               187
  pages_collapsed                   21                26
  thp_fault_alloc                   40818             44466
  thp_fault_fallback                18413             16679
  thp_collapse_alloc                21                150
  thp_collapse_alloc_failed         14                16
  thp_file_alloc                    369               369

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: tweak comment]
[arnd@arndb.de: avoid uninitialized variable use]
  Link: http://lkml.kernel.org/r/20171215125129.2948634-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/1513281203-54878-1-git-send-email-yang.s@alibaba-inc.com
Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 mm/khugepaged.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index 33255bf91074..c7d5624e2376 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -1679,10 +1679,14 @@ static unsigned int khugepaged_scan_mm_slot(unsigned int pages,
 	spin_unlock(&khugepaged_mm_lock);
 
 	mm = mm_slot->mm;
-	down_read(&mm->mmap_sem);
-	if (unlikely(khugepaged_test_exit(mm)))
-		vma = NULL;
-	else
+	/*
+	 * Don't wait for semaphore (to avoid long wait times).  Just move to
+	 * the next mm on the list.
+	 */
+	vma = NULL;
+	if (unlikely(!down_read_trylock(&mm->mmap_sem)))
+		goto breakouterloop_mmap_sem;
+	if (likely(!khugepaged_test_exit(mm)))
 		vma = find_vma(mm, khugepaged_scan.address);
 
 	progress++;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 124/189] mm: pin address_space before dereferencing it while isolating an LRU page

[Sasha Levin]

From: Mel Gorman <mgorman@techsingularity.net>

[ Upstream commit 69d763fc6d3aee787a3e8c8c35092b4f4960fa5d ]

Minchan Kim asked the following question -- what locks protects
address_space destroying when race happens between inode trauncation and
__isolate_lru_page? Jan Kara clarified by describing the race as follows

CPU1                                            CPU2

truncate(inode)                                 __isolate_lru_page()
  ...
  truncate_inode_page(mapping, page);
    delete_from_page_cache(page)
      spin_lock_irqsave(&mapping->tree_lock, flags);
        __delete_from_page_cache(page, NULL)
          page_cache_tree_delete(..)
            ...                                   mapping = page_mapping(page);
            page->mapping = NULL;
            ...
      spin_unlock_irqrestore(&mapping->tree_lock, flags);
      page_cache_free_page(mapping, page)
        put_page(page)
          if (put_page_testzero(page)) -> false
- inode now has no pages and can be freed including embedded address_space

                                                  if (mapping && !mapping->a_ops->migratepage)
- we've dereferenced mapping which is potentially already free.

The race is theoretically possible but unlikely.  Before the
delete_from_page_cache, truncate_cleanup_page is called so the page is
likely to be !PageDirty or PageWriteback which gets skipped by the only
caller that checks the mappping in __isolate_lru_page.  Even if the race
occurs, a substantial amount of work has to happen during a tiny window
with no preemption but it could potentially be done using a virtual
machine to artifically slow one CPU or halt it during the critical
window.

This patch should eliminate the race with truncation by try-locking the
page before derefencing mapping and aborting if the lock was not
acquired.  There was a suggestion from Huang Ying to use RCU as a
side-effect to prevent mapping being freed.  However, I do not like the
solution as it's an unconventional means of preserving a mapping and
it's not a context where rcu_read_lock is obviously protecting rcu data.

Link: http://lkml.kernel.org/r/20180104102512.2qos3h5vqzeisrek@techsingularity.net
Fixes: c82449352854 ("mm: compaction: make isolate_lru_page() filter-aware again")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 mm/vmscan.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/mm/vmscan.c b/mm/vmscan.c
index 503fa224c6b6..ff9066d096c1 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1436,14 +1436,24 @@ int __isolate_lru_page(struct page *page, isolate_mode_t mode)
 
 		if (PageDirty(page)) {
 			struct address_space *mapping;
+			bool migrate_dirty;
 
 			/*
 			 * Only pages without mappings or that have a
 			 * ->migratepage callback are possible to migrate
-			 * without blocking
+			 * without blocking. However, we can be racing with
+			 * truncation so it's necessary to lock the page
+			 * to stabilise the mapping as truncation holds
+			 * the page lock until after the page is removed
+			 * from the page cache.
 			 */
+			if (!trylock_page(page))
+				return ret;
+
 			mapping = page_mapping(page);
-			if (mapping && !mapping->a_ops->migratepage)
+			migrate_dirty = mapping && mapping->a_ops->migratepage;
+			unlock_page(page);
+			if (!migrate_dirty)
 				return ret;
 		}
 	}
-- 
2.15.1

[PATCH AUTOSEL for 4.15 126/189] openvswitch: Remove padding from packet before L3+ conntrack processing

[Sasha Levin]

From: Ed Swierk <eswierk@skyportsystems.com>

[ Upstream commit 9382fe71c0058465e942a633869629929102843d ]

IPv4 and IPv6 packets may arrive with lower-layer padding that is not
included in the L3 length. For example, a short IPv4 packet may have
up to 6 bytes of padding following the IP payload when received on an
Ethernet device with a minimum packet length of 64 bytes.

Higher-layer processing functions in netfilter (e.g. nf_ip_checksum(),
and help() in nf_conntrack_ftp) assume skb->len reflects the length of
the L3 header and payload, rather than referring back to
ip_hdr->tot_len or ipv6_hdr->payload_len, and get confused by
lower-layer padding.

In the normal IPv4 receive path, ip_rcv() trims the packet to
ip_hdr->tot_len before invoking netfilter hooks. In the IPv6 receive
path, ip6_rcv() does the same using ipv6_hdr->payload_len. Similarly
in the br_netfilter receive path, br_validate_ipv4() and
br_validate_ipv6() trim the packet to the L3 length before invoking
netfilter hooks.

Currently in the OVS conntrack receive path, ovs_ct_execute() pulls
the skb to the L3 header but does not trim it to the L3 length before
calling nf_conntrack_in(NF_INET_PRE_ROUTING). When
nf_conntrack_proto_tcp encounters a packet with lower-layer padding,
nf_ip_checksum() fails causing a "nf_ct_tcp: bad TCP checksum" log
message. While extra zero bytes don't affect the checksum, the length
in the IP pseudoheader does. That length is based on skb->len, and
without trimming, it doesn't match the length the sender used when
computing the checksum.

In ovs_ct_execute(), trim the skb to the L3 length before higher-layer
processing.

Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/openvswitch/conntrack.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c
index b27c5c6d9cab..8f04bd6e44bb 100644
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -1098,6 +1098,36 @@ static int ovs_ct_commit(struct net *net, struct sw_flow_key *key,
 	return 0;
 }
 
+/* Trim the skb to the length specified by the IP/IPv6 header,
+ * removing any trailing lower-layer padding. This prepares the skb
+ * for higher-layer processing that assumes skb->len excludes padding
+ * (such as nf_ip_checksum). The caller needs to pull the skb to the
+ * network header, and ensure ip_hdr/ipv6_hdr points to valid data.
+ */
+static int ovs_skb_network_trim(struct sk_buff *skb)
+{
+	unsigned int len;
+	int err;
+
+	switch (skb->protocol) {
+	case htons(ETH_P_IP):
+		len = ntohs(ip_hdr(skb)->tot_len);
+		break;
+	case htons(ETH_P_IPV6):
+		len = sizeof(struct ipv6hdr)
+			+ ntohs(ipv6_hdr(skb)->payload_len);
+		break;
+	default:
+		len = skb->len;
+	}
+
+	err = pskb_trim_rcsum(skb, len);
+	if (err)
+		kfree_skb(skb);
+
+	return err;
+}
+
 /* Returns 0 on success, -EINPROGRESS if 'skb' is stolen, or other nonzero
  * value if 'skb' is freed.
  */
@@ -1112,6 +1142,10 @@ int ovs_ct_execute(struct net *net, struct sk_buff *skb,
 	nh_ofs = skb_network_offset(skb);
 	skb_pull_rcsum(skb, nh_ofs);
 
+	err = ovs_skb_network_trim(skb);
+	if (err)
+		return err;
+
 	if (key->ip.frag != OVS_FRAG_TYPE_NONE) {
 		err = handle_fragments(net, key, info->zone.id, skb);
 		if (err)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 127/189] ibmvnic: fix firmware version when no firmware level has been provided by the VIOS server

[Sasha Levin]

From: Desnes Augusto Nunes do Rosario <desnesn@linux.vnet.ibm.com>

[ Upstream commit a107311d7fdf6b826f3737c4a90fd0e0046e7a3a ]

Older versions of VIOS servers do not send the firmware level in the VPD
buffer for the ibmvnic driver. Thus, not only the current message is mis-
leading but the firmware version in the ethtool will be NULL. Therefore,
this patch fixes the firmware string and its warning.

Fixes: 4e6759be28e4 ("ibmvnic: Feature implementation of VPD for the ibmvnic driver")
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index d4e87333bac2..4ba49a98c689 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -3294,7 +3294,11 @@ static void handle_vpd_rsp(union ibmvnic_crq *crq,
 	 */
 	substr = strnstr(adapter->vpd->buff, "RM", adapter->vpd->len);
 	if (!substr) {
-		dev_info(dev, "No FW level provided by VPD\n");
+		dev_info(dev, "Warning - No FW level has been provided in the VPD buffer by the VIOS Server\n");
+		ptr = strncpy((char *)adapter->fw_version, "N/A",
+			      3 * sizeof(char));
+		if (!ptr)
+			dev_err(dev, "Failed to inform that firmware version is unavailable to the adapter\n");
 		goto complete;
 	}
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 129/189] IB/hfi1: Re-order IRQ cleanup to address driver cleanup race

[Sasha Levin]

From: "Michael J. Ruhl" <michael.j.ruhl@intel.com>

[ Upstream commit 82a979265638c505e12fbe7ba40980dc0901436d ]

The pci_request_irq() interfaces always adds the IRQF_SHARED bit to
all IRQ requests.

When the kernel is built with CONFIG_DEBUG_SHIRQ config flag, if the
IRQF_SHARED bit is set, a call to the IRQ handler is made from the
__free_irq() function. This is testing a race condition between the
IRQ cleanup and an IRQ racing the cleanup.  The HFI driver should be
able to handle this race, but does not.

This race can cause traces that start with this footprint:

BUG: unable to handle kernel NULL pointer dereference at   (null)
Call Trace:
 <hfi1 irq handler>
 ...
 __free_irq+0x1b3/0x2d0
 free_irq+0x35/0x70
 pci_free_irq+0x1c/0x30
 clean_up_interrupts+0x53/0xf0 [hfi1]
 hfi1_start_cleanup+0x122/0x190 [hfi1]
 postinit_cleanup+0x1d/0x280 [hfi1]
 remove_one+0x233/0x250 [hfi1]
 pci_device_remove+0x39/0xc0

Export IRQ cleanup function so it can be called from other modules.

Using the exported cleanup function:

  Re-order the driver cleanup code to clean up IRQ resources before
  other resources, eliminating the race.

  Re-order error path for init so that the race does not occur.

Reduce severity on spurious error message for SDMA IRQs to info.

Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Reviewed-by: Patel Jay P <jay.p.patel@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/hfi1/chip.c | 18 ++++++++++++------
 drivers/infiniband/hw/hfi1/hfi.h  |  1 +
 drivers/infiniband/hw/hfi1/init.c |  4 +++-
 3 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c
index 4f057e8ffe50..a7a5d19b1fe4 100644
--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -8263,8 +8263,8 @@ static irqreturn_t sdma_interrupt(int irq, void *data)
 		/* handle the interrupt(s) */
 		sdma_engine_interrupt(sde, status);
 	} else {
-		dd_dev_err_ratelimited(dd, "SDMA engine %u interrupt, but no status bits set\n",
-				       sde->this_idx);
+		dd_dev_info_ratelimited(dd, "SDMA engine %u interrupt, but no status bits set\n",
+					sde->this_idx);
 	}
 	return IRQ_HANDLED;
 }
@@ -12984,7 +12984,14 @@ static void disable_intx(struct pci_dev *pdev)
 	pci_intx(pdev, 0);
 }
 
-static void clean_up_interrupts(struct hfi1_devdata *dd)
+/**
+ * hfi1_clean_up_interrupts() - Free all IRQ resources
+ * @dd: valid device data data structure
+ *
+ * Free the MSI or INTx IRQs and assoicated PCI resources,
+ * if they have been allocated.
+ */
+void hfi1_clean_up_interrupts(struct hfi1_devdata *dd)
 {
 	int i;
 
@@ -13345,7 +13352,7 @@ static int set_up_interrupts(struct hfi1_devdata *dd)
 	return 0;
 
 fail:
-	clean_up_interrupts(dd);
+	hfi1_clean_up_interrupts(dd);
 	return ret;
 }
 
@@ -14772,7 +14779,6 @@ void hfi1_start_cleanup(struct hfi1_devdata *dd)
 	aspm_exit(dd);
 	free_cntrs(dd);
 	free_rcverr(dd);
-	clean_up_interrupts(dd);
 	finish_chip_resources(dd);
 }
 
@@ -15229,7 +15235,7 @@ bail_free_rcverr:
 bail_free_cntrs:
 	free_cntrs(dd);
 bail_clear_intr:
-	clean_up_interrupts(dd);
+	hfi1_clean_up_interrupts(dd);
 bail_cleanup:
 	hfi1_pcie_ddcleanup(dd);
 bail_free:
diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h
index 8ce9118d4a7f..3c3f71d7919d 100644
--- a/drivers/infiniband/hw/hfi1/hfi.h
+++ b/drivers/infiniband/hw/hfi1/hfi.h
@@ -1957,6 +1957,7 @@ void hfi1_verbs_unregister_sysfs(struct hfi1_devdata *dd);
 int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len);
 
 int hfi1_pcie_init(struct pci_dev *pdev, const struct pci_device_id *ent);
+void hfi1_clean_up_interrupts(struct hfi1_devdata *dd);
 void hfi1_pcie_cleanup(struct pci_dev *pdev);
 int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev);
 void hfi1_pcie_ddcleanup(struct hfi1_devdata *);
diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c
index 8e3b3e7d829a..117a74f22670 100644
--- a/drivers/infiniband/hw/hfi1/init.c
+++ b/drivers/infiniband/hw/hfi1/init.c
@@ -1058,8 +1058,9 @@ static void shutdown_device(struct hfi1_devdata *dd)
 	}
 	dd->flags &= ~HFI1_INITTED;
 
-	/* mask interrupts, but not errors */
+	/* mask and clean up interrupts, but not errors */
 	set_intr_state(dd, 0);
+	hfi1_clean_up_interrupts(dd);
 
 	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
 		ppd = dd->pport + pidx;
@@ -1702,6 +1703,7 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dd_dev_err(dd, "Failed to create /dev devices: %d\n", -j);
 
 	if (initfail || ret) {
+		hfi1_clean_up_interrupts(dd);
 		stop_timers(dd);
 		flush_workqueue(ib_wq);
 		for (pidx = 0; pidx < dd->num_pports; ++pidx) {
-- 
2.15.1

[PATCH AUTOSEL for 4.15 128/189] blk-mq: fix discard merge with scheduler attached

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit 445251d0f4d329aa061f323546cd6388a3bb7ab5 ]

I ran into an issue on my laptop that triggered a bug on the
discard path:

WARNING: CPU: 2 PID: 207 at drivers/nvme/host/core.c:527 nvme_setup_cmd+0x3d3/0x430
 Modules linked in: rfcomm fuse ctr ccm bnep arc4 binfmt_misc snd_hda_codec_hdmi nls_iso8859_1 nls_cp437 vfat snd_hda_codec_conexant fat snd_hda_codec_generic iwlmvm snd_hda_intel snd_hda_codec snd_hwdep mac80211 snd_hda_core snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq x86_pkg_temp_thermal intel_powerclamp kvm_intel uvcvideo iwlwifi btusb snd_seq_device videobuf2_vmalloc btintel videobuf2_memops kvm snd_timer videobuf2_v4l2 bluetooth irqbypass videobuf2_core aesni_intel aes_x86_64 crypto_simd cryptd snd glue_helper videodev cfg80211 ecdh_generic soundcore hid_generic usbhid hid i915 psmouse e1000e ptp pps_core xhci_pci xhci_hcd intel_gtt
 CPU: 2 PID: 207 Comm: jbd2/nvme0n1p7- Tainted: G     U           4.15.0+ #176
 Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET59W (1.33 ) 12/19/2017
 RIP: 0010:nvme_setup_cmd+0x3d3/0x430
 RSP: 0018:ffff880423e9f838 EFLAGS: 00010217
 RAX: 0000000000000000 RBX: ffff880423e9f8c8 RCX: 0000000000010000
 RDX: ffff88022b200010 RSI: 0000000000000002 RDI: 00000000327f0000
 RBP: ffff880421251400 R08: ffff88022b200000 R09: 0000000000000009
 R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000ffff
 R13: ffff88042341e280 R14: 000000000000ffff R15: ffff880421251440
 FS:  0000000000000000(0000) GS:ffff880441500000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000055b684795030 CR3: 0000000002e09006 CR4: 00000000001606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  nvme_queue_rq+0x40/0xa00
  ? __sbitmap_queue_get+0x24/0x90
  ? blk_mq_get_tag+0xa3/0x250
  ? wait_woken+0x80/0x80
  ? blk_mq_get_driver_tag+0x97/0xf0
  blk_mq_dispatch_rq_list+0x7b/0x4a0
  ? deadline_remove_request+0x49/0xb0
  blk_mq_do_dispatch_sched+0x4f/0xc0
  blk_mq_sched_dispatch_requests+0x106/0x170
  __blk_mq_run_hw_queue+0x53/0xa0
  __blk_mq_delay_run_hw_queue+0x83/0xa0
  blk_mq_run_hw_queue+0x6c/0xd0
  blk_mq_sched_insert_request+0x96/0x140
  __blk_mq_try_issue_directly+0x3d/0x190
  blk_mq_try_issue_directly+0x30/0x70
  blk_mq_make_request+0x1a4/0x6a0
  generic_make_request+0xfd/0x2f0
  ? submit_bio+0x5c/0x110
  submit_bio+0x5c/0x110
  ? __blkdev_issue_discard+0x152/0x200
  submit_bio_wait+0x43/0x60
  ext4_process_freed_data+0x1cd/0x440
  ? account_page_dirtied+0xe2/0x1a0
  ext4_journal_commit_callback+0x4a/0xc0
  jbd2_journal_commit_transaction+0x17e2/0x19e0
  ? kjournald2+0xb0/0x250
  kjournald2+0xb0/0x250
  ? wait_woken+0x80/0x80
  ? commit_timeout+0x10/0x10
  kthread+0x111/0x130
  ? kthread_create_worker_on_cpu+0x50/0x50
  ? do_group_exit+0x3a/0xa0
  ret_from_fork+0x1f/0x30
 Code: 73 89 c1 83 ce 10 c1 e1 10 09 ca 83 f8 04 0f 87 0f ff ff ff 8b 4d 20 48 8b 7d 00 c1 e9 09 48 01 8c c7 00 08 00 00 e9 f8 fe ff ff <0f> ff 4c 89 c7 41 bc 0a 00 00 00 e8 0d 78 d6 ff e9 a1 fc ff ff
 ---[ end trace 50d361cc444506c8 ]---
 print_req_error: I/O error, dev nvme0n1, sector 847167488

Decoding the assembly, the request claims to have 0xffff segments,
while nvme counts two. This turns out to be because we don't check
for a data carrying request on the mq scheduler path, and since
blk_phys_contig_segment() returns true for a non-data request,
we decrement the initial segment count of 0 and end up with
0xffff in the unsigned short.

There are a few issues here:

1) We should initialize the segment count for a discard to 1.
2) The discard merging is currently using the data limits for
   segments and sectors.

Fix this up by having attempt_merge() correctly identify the
request, and by initializing the segment count correctly
for discards.

This can only be triggered with mq-deadline on discard capable
devices right now, which isn't a common configuration.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 block/blk-core.c  |  2 ++
 block/blk-merge.c | 29 ++++++++++++++++++++++++++---
 2 files changed, 28 insertions(+), 3 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index b725d9e340c2..f6343ce5a80d 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -3260,6 +3260,8 @@ void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
 {
 	if (bio_has_data(bio))
 		rq->nr_phys_segments = bio_phys_segments(q, bio);
+	else if (bio_op(bio) == REQ_OP_DISCARD)
+		rq->nr_phys_segments = 1;
 
 	rq->__data_len = bio->bi_iter.bi_size;
 	rq->bio = rq->biotail = bio;
diff --git a/block/blk-merge.c b/block/blk-merge.c
index f5dedd57dff6..8d60a5bbcef9 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -551,6 +551,24 @@ static bool req_no_special_merge(struct request *req)
 	return !q->mq_ops && req->special;
 }
 
+static bool req_attempt_discard_merge(struct request_queue *q, struct request *req,
+		struct request *next)
+{
+	unsigned short segments = blk_rq_nr_discard_segments(req);
+
+	if (segments >= queue_max_discard_segments(q))
+		goto no_merge;
+	if (blk_rq_sectors(req) + bio_sectors(next->bio) >
+	    blk_rq_get_max_sectors(req, blk_rq_pos(req)))
+		goto no_merge;
+
+	req->nr_phys_segments = segments + blk_rq_nr_discard_segments(next);
+	return true;
+no_merge:
+	req_set_nomerge(q, req);
+	return false;
+}
+
 static int ll_merge_requests_fn(struct request_queue *q, struct request *req,
 				struct request *next)
 {
@@ -684,9 +702,13 @@ static struct request *attempt_merge(struct request_queue *q,
 	 * If we are allowed to merge, then append bio list
 	 * from next to rq and release next. merge_requests_fn
 	 * will have updated segment counts, update sector
-	 * counts here.
+	 * counts here. Handle DISCARDs separately, as they
+	 * have separate settings.
 	 */
-	if (!ll_merge_requests_fn(q, req, next))
+	if (req_op(req) == REQ_OP_DISCARD) {
+		if (!req_attempt_discard_merge(q, req, next))
+			return NULL;
+	} else if (!ll_merge_requests_fn(q, req, next))
 		return NULL;
 
 	/*
@@ -716,7 +738,8 @@ static struct request *attempt_merge(struct request_queue *q,
 
 	req->__data_len += blk_rq_bytes(next);
 
-	elv_merge_requests(q, req, next);
+	if (req_op(req) != REQ_OP_DISCARD)
+		elv_merge_requests(q, req, next);
 
 	/*
 	 * 'next' is going away, so update stats accordingly
-- 
2.15.1

[PATCH AUTOSEL for 4.15 130/189] IB/hfi1: Fix for early release of sdma context

[Sasha Levin]

From: Alex Estrin <alex.estrin@intel.com>

[ Upstream commit 473291b3ea0e1df81f7abf13b8ab4b98a346df5e ]

With IRQF_SHARED flag set and CONFIG_DEBUG_SHIRQ enabled
module removal may result in panic in sdma_interrupt() routine
if associated sdma context was released before pci_free_irq();

[ 9198.939885] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 9198.940514] IP: sdma_make_progress+0xa5/0x450 [hfi1]
[ 9198.941114] PGD 170bdc0067 P4D 170bdc0067 PUD 172063e067 PMD 0
[ 9198.941783] Oops: 0000 [#1] SMP
.....
[ 9198.958877] CPU: 132 PID: 64173 Comm: rmmod Tainted: G           OE   4.14.0-rc4+ #1
[ 9198.961032] Hardware name: Intel Corporation S7200AP/S7200AP, BIOS S72C610.86B.01.02.0118.080620171935 08/06/2017
[ 9198.963323] task: ffff9681397f0000 task.stack: ffffae1647c40000
[ 9198.965695] RIP: 0010:sdma_make_progress+0xa5/0x450 [hfi1]
[ 9198.968082] RSP: 0018:ffffae1647c43be8 EFLAGS: 00010046
[ 9198.970503] RAX: 0000000000000000 RBX: ffff9680ce8b5ca8 RCX: 0000000000000000
[ 9198.973006] RDX: 0000000000000000 RSI: 0000000001a00d28 RDI: ffff9680ce8b5ca0
[ 9198.975546] RBP: ffffae1647c43c40 R08: ffff96814325ec00 R09: 00000000ffffffff
[ 9198.978142] R10: 000000004325e501 R11: ffff96814325ec00 R12: ffff9680ce8b5c44
[ 9198.980779] R13: ffff9680ce8b5ca0 R14: 0000000000000000 R15: ffff9680ce8b5b00
[ 9198.983462] FS:  00007f31196ba740(0000) GS:ffff96819df00000(0000) knlGS:0000000000000000
[ 9198.986231] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9198.989036] CR2: 0000000000000000 CR3: 000000170833f000 CR4: 00000000001406e0
[ 9198.991911] Call Trace:
[ 9198.994847]  sdma_engine_interrupt+0x82/0x100 [hfi1]
[ 9198.997852]  sdma_interrupt+0x61/0xc0 [hfi1]
[ 9199.000852]  __free_irq+0x1b3/0x2d0
[ 9199.003873]  free_irq+0x35/0x70
[ 9199.006909]  pci_free_irq+0x1c/0x30
[ 9199.009999]  clean_up_interrupts+0x53/0xf0 [hfi1]
[ 9199.013137]  hfi1_start_cleanup+0x117/0x190 [hfi1]
[ 9199.016315]  postinit_cleanup+0x1d/0x270 [hfi1]
[ 9199.019529]  remove_one+0x1f3/0x210 [hfi1]
[ 9199.022738]  pci_device_remove+0x39/0xc0
[ 9199.025974]  device_release_driver_internal+0x141/0x210
[ 9199.029268]  driver_detach+0x3f/0x80
[ 9199.032580]  bus_remove_driver+0x55/0xd0
[ 9199.035931]  driver_unregister+0x2c/0x50
[ 9199.039321]  pci_unregister_driver+0x2a/0xa0
[ 9199.042755]  hfi1_mod_cleanup+0x10/0xb50 [hfi1]
[ 9199.046196]  SyS_delete_module+0x171/0x250
...

Fix by exporting sdma_clean() and removing from sdma_exit().
sdma_exit() now just manipulates the engine state,
leaving the memory free to sdma_clean() which is now called
just before the dd is freed.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/hfi1/init.c |  1 +
 drivers/infiniband/hw/hfi1/sdma.c | 13 +++++++------
 drivers/infiniband/hw/hfi1/sdma.h |  1 +
 3 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c
index 117a74f22670..edf0a37100f7 100644
--- a/drivers/infiniband/hw/hfi1/init.c
+++ b/drivers/infiniband/hw/hfi1/init.c
@@ -1219,6 +1219,7 @@ static void __hfi1_free_devdata(struct kobject *kobj)
 	free_percpu(dd->rcv_limit);
 	free_percpu(dd->send_schedule);
 	free_percpu(dd->tx_opstats);
+	sdma_clean(dd, dd->num_sdma);
 	rvt_dealloc_device(&dd->verbs_dev.rdi);
 }
 
diff --git a/drivers/infiniband/hw/hfi1/sdma.c b/drivers/infiniband/hw/hfi1/sdma.c
index 31c8f89b5fc8..37424a81a7c9 100644
--- a/drivers/infiniband/hw/hfi1/sdma.c
+++ b/drivers/infiniband/hw/hfi1/sdma.c
@@ -1276,13 +1276,15 @@ bail:
 	return -ENOMEM;
 }
 
-/*
- * Clean up allocated memory.
- *
- * This routine is can be called regardless of the success of sdma_init()
+/**
+ * sdma_clean()  Clean up allocated memory
+ * @dd:          struct hfi1_devdata
+ * @num_engines: num sdma engines
  *
+ * This routine can be called regardless of the success of
+ * sdma_init()
  */
-static void sdma_clean(struct hfi1_devdata *dd, size_t num_engines)
+void sdma_clean(struct hfi1_devdata *dd, size_t num_engines)
 {
 	size_t i;
 	struct sdma_engine *sde;
@@ -1618,7 +1620,6 @@ void sdma_exit(struct hfi1_devdata *dd)
 		 */
 		sdma_finalput(&sde->state);
 	}
-	sdma_clean(dd, dd->num_sdma);
 }
 
 /*
diff --git a/drivers/infiniband/hw/hfi1/sdma.h b/drivers/infiniband/hw/hfi1/sdma.h
index 374c59784950..46c775f255d1 100644
--- a/drivers/infiniband/hw/hfi1/sdma.h
+++ b/drivers/infiniband/hw/hfi1/sdma.h
@@ -420,6 +420,7 @@ struct sdma_engine {
 int sdma_init(struct hfi1_devdata *dd, u8 port);
 void sdma_start(struct hfi1_devdata *dd);
 void sdma_exit(struct hfi1_devdata *dd);
+void sdma_clean(struct hfi1_devdata *dd, size_t num_engines);
 void sdma_all_running(struct hfi1_devdata *dd);
 void sdma_all_idle(struct hfi1_devdata *dd);
 void sdma_freeze_notify(struct hfi1_devdata *dd, int go_idle);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 131/189] IB/hfi1: Fix for potential refcount leak in hfi1_open_file()

[Sasha Levin]

From: Alex Estrin <alex.estrin@intel.com>

[ Upstream commit 2b1e7fe16124e86ee9242aeeee859c79a843e3a2 ]

The dd refcount is speculatively incremented prior to allocating
the fd memory with kzalloc(). If that kzalloc() failed the dd
refcount leaks.
Increment refcount on kzalloc success.

Fixes: e11ffbd57520 ("IB/hfi1: Do not free hfi1 cdev parent structure early")
Reviewed-by: Michael J Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/hfi1/file_ops.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/file_ops.c b/drivers/infiniband/hw/hfi1/file_ops.c
index 1df7da47f431..acf0ba56c309 100644
--- a/drivers/infiniband/hw/hfi1/file_ops.c
+++ b/drivers/infiniband/hw/hfi1/file_ops.c
@@ -196,9 +196,6 @@ static int hfi1_file_open(struct inode *inode, struct file *fp)
 	if (!atomic_inc_not_zero(&dd->user_refcount))
 		return -ENXIO;
 
-	/* Just take a ref now. Not all opens result in a context assign */
-	kobject_get(&dd->kobj);
-
 	/* The real work is performed later in assign_ctxt() */
 
 	fd = kzalloc(sizeof(*fd), GFP_KERNEL);
@@ -208,6 +205,7 @@ static int hfi1_file_open(struct inode *inode, struct file *fp)
 		fd->mm = current->mm;
 		mmgrab(fd->mm);
 		fd->dd = dd;
+		kobject_get(&fd->dd->kobj);
 		fp->private_data = fd;
 	} else {
 		fp->private_data = NULL;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 132/189] IB/hfi1: Show fault stats in both TX and RX directions

[Sasha Levin]

From: Mitko Haralanov <mitko.haralanov@intel.com>

[ Upstream commit b5de809ef6f6c32cfbbf0da14ed11b0fdc0888f8 ]

The routine which shows the fault stats checks the counters
to determine whether to show any stats based on the number of
transmitted pkts/bytes for a particular opcode.

Unfortunately, it only checked the receive counters. As a result,
if any packet faults have happened for packets egressing the HFI,
those stats would not be shown.

In order to fix this, the routine is amended to also check the
TX counters. With this change the pkt/byte counts are the sum of
both TX and RX counts for the opcode.

Fixes: 1b311f8931cf ("IB/hfi1: Add tx_opcode_stats like the opcode_stats")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/hfi1/debugfs.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/hfi1/debugfs.c b/drivers/infiniband/hw/hfi1/debugfs.c
index 2e6e0c516041..852173bf05d0 100644
--- a/drivers/infiniband/hw/hfi1/debugfs.c
+++ b/drivers/infiniband/hw/hfi1/debugfs.c
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2015-2017 Intel Corporation.
+ * Copyright(c) 2015-2018 Intel Corporation.
  *
  * This file is provided under a dual BSD/GPLv2 license.  When using or
  * redistributing this file, you may do so under either license.
@@ -1201,6 +1201,13 @@ static int _fault_stats_seq_show(struct seq_file *s, void *v)
 		}
 		hfi1_rcd_put(rcd);
 	}
+	for_each_possible_cpu(j) {
+		struct hfi1_opcode_stats_perctx *sp =
+			per_cpu_ptr(dd->tx_opstats, j);
+
+		n_packets += sp->stats[i].n_packets;
+		n_bytes += sp->stats[i].n_bytes;
+	}
 	if (!n_packets && !n_bytes)
 		return SEQ_SKIP;
 	if (!ibd->fault_opcode->n_rxfaults[i] &&
-- 
2.15.1

[PATCH AUTOSEL for 4.15 133/189] IB/ipoib: Fix for potential no-carrier state

[Sasha Levin]

From: Alex Estrin <alex.estrin@intel.com>

[ Upstream commit 1029361084d18cc270f64dfd39529fafa10cfe01 ]

On reboot SM can program port pkey table before ipoib registered its
event handler, which could result in missing pkey event and leave root
interface with initial pkey value from index 0.

Since OPA port starts with invalid pkey in index 0, root interface will
fail to initialize and stay down with no-carrier flag.

For IB ipoib interface may end up with pkey different from value
opensm put in pkey table idx 0, resulting in connectivity issues
(different mcast groups, for example).

Close the window by calling event handler after registration
to make sure ipoib pkey is in sync with port pkey table.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 160c5d9bca4c..4e75848f7a35 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -2287,6 +2287,9 @@ static struct net_device *ipoib_add_port(const char *format,
 			      priv->ca, ipoib_event);
 	ib_register_event_handler(&priv->event_handler);
 
+	/* call event handler to ensure pkey in sync */
+	queue_work(ipoib_workqueue, &priv->flush_heavy);
+
 	result = register_netdev(priv->dev);
 	if (result) {
 		printk(KERN_WARNING "%s: couldn't register ipoib port %d; error %d\n",
-- 
2.15.1

[PATCH AUTOSEL for 4.15 134/189] IB/core: Map iWarp AH type to undefined in rdma_ah_find_type

[Sasha Levin]

From: Don Hiatt <don.hiatt@intel.com>

[ Upstream commit 87daac68f77a3e21a1113f816e6a7be0b38bdde8 ]

iWarp devices do not support the creation of address handles
so return AH_ATTR_TYPE_UNDEFINED for all iWarp devices.

While we are here reduce the size of port_num to u8 and add
a comment.

Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Reported-by: Parav Pandit <parav@mellanox.com>
CC: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/rdma/ib_verbs.h | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 20ebf9061962..411776de40e7 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -878,6 +878,7 @@ struct ib_mr_status {
 __attribute_const__ enum ib_rate mult_to_ib_rate(int mult);
 
 enum rdma_ah_attr_type {
+	RDMA_AH_ATTR_TYPE_UNDEFINED,
 	RDMA_AH_ATTR_TYPE_IB,
 	RDMA_AH_ATTR_TYPE_ROCE,
 	RDMA_AH_ATTR_TYPE_OPA,
@@ -3789,17 +3790,24 @@ static inline void rdma_ah_set_grh(struct rdma_ah_attr *attr,
 	grh->traffic_class = traffic_class;
 }
 
-/*Get AH type */
+/**
+ * rdma_ah_find_type - Return address handle type.
+ *
+ * @dev: Device to be checked
+ * @port_num: Port number
+ */
 static inline enum rdma_ah_attr_type rdma_ah_find_type(struct ib_device *dev,
-						       u32 port_num)
+						       u8 port_num)
 {
 	if (rdma_protocol_roce(dev, port_num))
 		return RDMA_AH_ATTR_TYPE_ROCE;
-	else if ((rdma_protocol_ib(dev, port_num)) &&
-		 (rdma_cap_opa_ah(dev, port_num)))
-		return RDMA_AH_ATTR_TYPE_OPA;
-	else
+	if (rdma_protocol_ib(dev, port_num)) {
+		if (rdma_cap_opa_ah(dev, port_num))
+			return RDMA_AH_ATTR_TYPE_OPA;
 		return RDMA_AH_ATTR_TYPE_IB;
+	}
+
+	return RDMA_AH_ATTR_TYPE_UNDEFINED;
 }
 
 /**
-- 
2.15.1

[PATCH AUTOSEL for 4.15 135/189] drm/nouveau/pmu/fuc: don't use movw directly anymore

[Sasha Levin]

From: Karol Herbst <kherbst@redhat.com>

[ Upstream commit fe9748b7b41cee11f8db57fb8b20bc540a33102a ]

Fixes failure to compile with recent envyas as a result of the 'movw'
alias being removed for v5.

A bit of history:

v3 only has a 16-bit sign-extended immediate mov op. In order to set
the high bits, there's a separate 'sethi' op. envyas validates that
the value passed to mov(imm) is between -0x8000 and 0x7fff. In order
to simplify macros that load both the low and high word, a 'movw'
alias was added which takes an unsigned 16-bit immediate. However the
actual hardware op still sign extends.

v5 has a full 32-bit immediate mov op. The v3 16-bit immediate mov op
is gone (loads 0 into the dst reg). However due to a bug in envyas,
the movw alias still existed, and selected the no-longer-present v3
16-bit immediate mov op. As a result usage of movw on v5 is the same
as mov with a 0x0 argument.

The proper fix throughout is to only ever use the 'movw' alias in
combination with 'sethi'. Anything else should get the sign-extended
validation to ensure that the intended value ends up in the
destination register.

Changes in fuc3 binaries is the result of a different encoding being
selected for a mov with an 8-bit value.

v2: added commit message written by Ilia, thanks for that!
v3: messed up rebasing, now it should apply

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 .../drm/nouveau/nvkm/subdev/pmu/fuc/gf100.fuc3.h   |  746 +++++++--------
 .../drm/nouveau/nvkm/subdev/pmu/fuc/gk208.fuc5.h   |  802 ++++++++--------
 .../drm/nouveau/nvkm/subdev/pmu/fuc/gt215.fuc3.h   | 1006 ++++++++++----------
 .../gpu/drm/nouveau/nvkm/subdev/pmu/fuc/memx.fuc   |   30 +-
 4 files changed, 1292 insertions(+), 1292 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/gf100.fuc3.h b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/gf100.fuc3.h
index 53d01fb00a8b..1dbe593e5960 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/gf100.fuc3.h
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/gf100.fuc3.h
@@ -47,8 +47,8 @@ static uint32_t gf100_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x584d454d,
-	0x00000756,
-	0x00000748,
+	0x00000754,
+	0x00000746,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -69,8 +69,8 @@ static uint32_t gf100_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x46524550,
-	0x0000075a,
 	0x00000758,
+	0x00000756,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -91,8 +91,8 @@ static uint32_t gf100_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x5f433249,
-	0x00000b8a,
-	0x00000a2d,
+	0x00000b88,
+	0x00000a2b,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -113,8 +113,8 @@ static uint32_t gf100_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x54534554,
-	0x00000bb3,
-	0x00000b8c,
+	0x00000bb1,
+	0x00000b8a,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -135,8 +135,8 @@ static uint32_t gf100_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x454c4449,
-	0x00000bbf,
 	0x00000bbd,
+	0x00000bbb,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -237,19 +237,19 @@ static uint32_t gf100_pmu_data[] = {
 	0x000005d3,
 	0x00000003,
 	0x00000002,
-	0x0000069d,
+	0x0000069b,
 	0x00040004,
 	0x00000000,
-	0x000006b9,
+	0x000006b7,
 	0x00010005,
 	0x00000000,
-	0x000006d6,
+	0x000006d4,
 	0x00010006,
 	0x00000000,
 	0x0000065b,
 	0x00000007,
 	0x00000000,
-	0x000006e1,
+	0x000006df,
 /* 0x03c4: memx_func_tail */
 /* 0x03c4: memx_ts_start */
 	0x00000000,
@@ -1373,432 +1373,432 @@ static uint32_t gf100_pmu_code[] = {
 /* 0x065b: memx_func_wait_vblank */
 	0x9800f840,
 	0x66b00016,
-	0x130bf400,
+	0x120bf400,
 	0xf40166b0,
 	0x0ef4060b,
 /* 0x066d: memx_func_wait_vblank_head1 */
-	0x2077f12e,
-	0x070ef400,
-/* 0x0674: memx_func_wait_vblank_head0 */
-	0x000877f1,
-/* 0x0678: memx_func_wait_vblank_0 */
-	0x07c467f1,
-	0xcf0664b6,
-	0x67fd0066,
-	0xf31bf404,
-/* 0x0688: memx_func_wait_vblank_1 */
-	0x07c467f1,
-	0xcf0664b6,
-	0x67fd0066,
-	0xf30bf404,
-/* 0x0698: memx_func_wait_vblank_fini */
-	0xf80410b6,
-/* 0x069d: memx_func_wr32 */
-	0x00169800,
-	0xb6011598,
-	0x60f90810,
-	0xd0fc50f9,
-	0x21f4e0fc,
-	0x0242b640,
-	0xf8e91bf4,
-/* 0x06b9: memx_func_wait */
-	0x2c87f000,
-	0xcf0684b6,
-	0x1e980088,
-	0x011d9800,
-	0x98021c98,
-	0x10b6031b,
-	0xa321f410,
-/* 0x06d6: memx_func_delay */
-	0x1e9800f8,
-	0x0410b600,
-	0xf87e21f4,
-/* 0x06e1: memx_func_train */
-/* 0x06e3: memx_exec */
-	0xf900f800,
-	0xb9d0f9e0,
-	0xb2b902c1,
-/* 0x06ed: memx_exec_next */
-	0x00139802,
-	0xe70410b6,
-	0xe701f034,
-	0xb601e033,
-	0x30f00132,
-	0xde35980c,
-	0x12b855f9,
-	0xe41ef406,
-	0x98f10b98,
-	0xcbbbf20c,
-	0xc4b7f102,
-	0x06b4b607,
-	0xfc00bbcf,
-	0xf5e0fcd0,
-	0xf8033621,
-/* 0x0729: memx_info */
-	0x01c67000,
-/* 0x072f: memx_info_data */
-	0xf10e0bf4,
-	0xf103ccc7,
-	0xf40800b7,
-/* 0x073a: memx_info_train */
-	0xc7f10b0e,
-	0xb7f10bcc,
-/* 0x0742: memx_info_send */
-	0x21f50100,
-	0x00f80336,
-/* 0x0748: memx_recv */
-	0xf401d6b0,
-	0xd6b0980b,
-	0xd80bf400,
-/* 0x0756: memx_init */
-	0x00f800f8,
-/* 0x0758: perf_recv */
-/* 0x075a: perf_init */
+	0x2077f02c,
+/* 0x0673: memx_func_wait_vblank_head0 */
+	0xf0060ef4,
+/* 0x0676: memx_func_wait_vblank_0 */
+	0x67f10877,
+	0x64b607c4,
+	0x0066cf06,
+	0xf40467fd,
+/* 0x0686: memx_func_wait_vblank_1 */
+	0x67f1f31b,
+	0x64b607c4,
+	0x0066cf06,
+	0xf40467fd,
+/* 0x0696: memx_func_wait_vblank_fini */
+	0x10b6f30b,
+/* 0x069b: memx_func_wr32 */
+	0x9800f804,
+	0x15980016,
+	0x0810b601,
+	0x50f960f9,
+	0xe0fcd0fc,
+	0xb64021f4,
+	0x1bf40242,
+/* 0x06b7: memx_func_wait */
+	0xf000f8e9,
+	0x84b62c87,
+	0x0088cf06,
+	0x98001e98,
+	0x1c98011d,
+	0x031b9802,
+	0xf41010b6,
+	0x00f8a321,
+/* 0x06d4: memx_func_delay */
+	0xb6001e98,
+	0x21f40410,
+/* 0x06df: memx_func_train */
+	0xf800f87e,
+/* 0x06e1: memx_exec */
+	0xf9e0f900,
+	0x02c1b9d0,
+/* 0x06eb: memx_exec_next */
+	0x9802b2b9,
+	0x10b60013,
+	0xf034e704,
+	0xe033e701,
+	0x0132b601,
+	0x980c30f0,
+	0x55f9de35,
+	0xf40612b8,
+	0x0b98e41e,
+	0xf20c98f1,
+	0xf102cbbb,
+	0xb607c4b7,
+	0xbbcf06b4,
+	0xfcd0fc00,
+	0x3621f5e0,
+/* 0x0727: memx_info */
+	0x7000f803,
+	0x0bf401c6,
+/* 0x072d: memx_info_data */
+	0xccc7f10e,
+	0x00b7f103,
+	0x0b0ef408,
+/* 0x0738: memx_info_train */
+	0x0bccc7f1,
+	0x0100b7f1,
+/* 0x0740: memx_info_send */
+	0x033621f5,
+/* 0x0746: memx_recv */
+	0xd6b000f8,
+	0x980bf401,
+	0xf400d6b0,
+	0x00f8d80b,
+/* 0x0754: memx_init */
+/* 0x0756: perf_recv */
 	0x00f800f8,
-/* 0x075c: i2c_drive_scl */
-	0xf40036b0,
-	0x07f1110b,
-	0x04b607e0,
-	0x0001d006,
-	0x00f804bd,
-/* 0x0770: i2c_drive_scl_lo */
-	0x07e407f1,
-	0xd00604b6,
-	0x04bd0001,
-/* 0x077e: i2c_drive_sda */
+/* 0x0758: perf_init */
+/* 0x075a: i2c_drive_scl */
 	0x36b000f8,
 	0x110bf400,
 	0x07e007f1,
 	0xd00604b6,
-	0x04bd0002,
-/* 0x0792: i2c_drive_sda_lo */
+	0x04bd0001,
+/* 0x076e: i2c_drive_scl_lo */
 	0x07f100f8,
 	0x04b607e4,
+	0x0001d006,
+	0x00f804bd,
+/* 0x077c: i2c_drive_sda */
+	0xf40036b0,
+	0x07f1110b,
+	0x04b607e0,
 	0x0002d006,
 	0x00f804bd,
-/* 0x07a0: i2c_sense_scl */
-	0xf10132f4,
-	0xb607c437,
-	0x33cf0634,
-	0x0431fd00,
-	0xf4060bf4,
-/* 0x07b6: i2c_sense_scl_done */
-	0x00f80131,
-/* 0x07b8: i2c_sense_sda */
-	0xf10132f4,
-	0xb607c437,
-	0x33cf0634,
-	0x0432fd00,
-	0xf4060bf4,
-/* 0x07ce: i2c_sense_sda_done */
-	0x00f80131,
-/* 0x07d0: i2c_raise_scl */
-	0x47f140f9,
-	0x37f00898,
-	0x5c21f501,
-/* 0x07dd: i2c_raise_scl_wait */
-	0xe8e7f107,
-	0x7e21f403,
-	0x07a021f5,
-	0xb60901f4,
-	0x1bf40142,
-/* 0x07f1: i2c_raise_scl_done */
-	0xf840fcef,
-/* 0x07f5: i2c_start */
-	0xa021f500,
-	0x0d11f407,
-	0x07b821f5,
-	0xf40611f4,
-/* 0x0806: i2c_start_rep */
-	0x37f0300e,
-	0x5c21f500,
-	0x0137f007,
-	0x077e21f5,
-	0xb60076bb,
-	0x50f90465,
-	0xbb046594,
-	0x50bd0256,
-	0xfc0475fd,
-	0xd021f550,
-	0x0464b607,
-/* 0x0833: i2c_start_send */
-	0xf01f11f4,
+/* 0x0790: i2c_drive_sda_lo */
+	0x07e407f1,
+	0xd00604b6,
+	0x04bd0002,
+/* 0x079e: i2c_sense_scl */
+	0x32f400f8,
+	0xc437f101,
+	0x0634b607,
+	0xfd0033cf,
+	0x0bf40431,
+	0x0131f406,
+/* 0x07b4: i2c_sense_scl_done */
+/* 0x07b6: i2c_sense_sda */
+	0x32f400f8,
+	0xc437f101,
+	0x0634b607,
+	0xfd0033cf,
+	0x0bf40432,
+	0x0131f406,
+/* 0x07cc: i2c_sense_sda_done */
+/* 0x07ce: i2c_raise_scl */
+	0x40f900f8,
+	0x089847f1,
+	0xf50137f0,
+/* 0x07db: i2c_raise_scl_wait */
+	0xf1075a21,
+	0xf403e8e7,
+	0x21f57e21,
+	0x01f4079e,
+	0x0142b609,
+/* 0x07ef: i2c_raise_scl_done */
+	0xfcef1bf4,
+/* 0x07f3: i2c_start */
+	0xf500f840,
+	0xf4079e21,
+	0x21f50d11,
+	0x11f407b6,
+	0x300ef406,
+/* 0x0804: i2c_start_rep */
+	0xf50037f0,
+	0xf0075a21,
+	0x21f50137,
+	0x76bb077c,
+	0x0465b600,
+	0x659450f9,
+	0x0256bb04,
+	0x75fd50bd,
+	0xf550fc04,
+	0xb607ce21,
+	0x11f40464,
+/* 0x0831: i2c_start_send */
+	0x0037f01f,
+	0x077c21f5,
+	0x1388e7f1,
+	0xf07e21f4,
 	0x21f50037,
-	0xe7f1077e,
+	0xe7f1075a,
 	0x21f41388,
-	0x0037f07e,
-	0x075c21f5,
-	0x1388e7f1,
-/* 0x084f: i2c_start_out */
-	0xf87e21f4,
-/* 0x0851: i2c_stop */
-	0x0037f000,
-	0x075c21f5,
-	0xf50037f0,
-	0xf1077e21,
-	0xf403e8e7,
-	0x37f07e21,
-	0x5c21f501,
-	0x88e7f107,
-	0x7e21f413,
+/* 0x084d: i2c_start_out */
+/* 0x084f: i2c_stop */
+	0xf000f87e,
+	0x21f50037,
+	0x37f0075a,
+	0x7c21f500,
+	0xe8e7f107,
+	0x7e21f403,
 	0xf50137f0,
-	0xf1077e21,
+	0xf1075a21,
 	0xf41388e7,
-	0x00f87e21,
-/* 0x0884: i2c_bitw */
-	0x077e21f5,
-	0x03e8e7f1,
-	0xbb7e21f4,
-	0x65b60076,
-	0x9450f904,
-	0x56bb0465,
-	0xfd50bd02,
-	0x50fc0475,
-	0x07d021f5,
-	0xf40464b6,
-	0xe7f11811,
-	0x21f41388,
-	0x0037f07e,
-	0x075c21f5,
-	0x1388e7f1,
-/* 0x08c3: i2c_bitw_out */
-	0xf87e21f4,
-/* 0x08c5: i2c_bitr */
-	0x0137f000,
-	0x077e21f5,
-	0x03e8e7f1,
-	0xbb7e21f4,
-	0x65b60076,
-	0x9450f904,
-	0x56bb0465,
-	0xfd50bd02,
-	0x50fc0475,
-	0x07d021f5,
-	0xf40464b6,
-	0x21f51b11,
-	0x37f007b8,
-	0x5c21f500,
+	0x37f07e21,
+	0x7c21f501,
 	0x88e7f107,
 	0x7e21f413,
-	0xf4013cf0,
-/* 0x090a: i2c_bitr_done */
-	0x00f80131,
-/* 0x090c: i2c_get_byte */
-	0xf00057f0,
-/* 0x0912: i2c_get_byte_next */
-	0x54b60847,
-	0x0076bb01,
+/* 0x0882: i2c_bitw */
+	0x21f500f8,
+	0xe7f1077c,
+	0x21f403e8,
+	0x0076bb7e,
 	0xf90465b6,
 	0x04659450,
 	0xbd0256bb,
 	0x0475fd50,
 	0x21f550fc,
-	0x64b608c5,
-	0x2b11f404,
-	0xb60553fd,
-	0x1bf40142,
-	0x0137f0d8,
-	0xb60076bb,
-	0x50f90465,
-	0xbb046594,
-	0x50bd0256,
-	0xfc0475fd,
-	0x8421f550,
-	0x0464b608,
-/* 0x095c: i2c_get_byte_done */
-/* 0x095e: i2c_put_byte */
-	0x47f000f8,
-/* 0x0961: i2c_put_byte_next */
-	0x0142b608,
-	0xbb3854ff,
+	0x64b607ce,
+	0x1811f404,
+	0x1388e7f1,
+	0xf07e21f4,
+	0x21f50037,
+	0xe7f1075a,
+	0x21f41388,
+/* 0x08c1: i2c_bitw_out */
+/* 0x08c3: i2c_bitr */
+	0xf000f87e,
+	0x21f50137,
+	0xe7f1077c,
+	0x21f403e8,
+	0x0076bb7e,
+	0xf90465b6,
+	0x04659450,
+	0xbd0256bb,
+	0x0475fd50,
+	0x21f550fc,
+	0x64b607ce,
+	0x1b11f404,
+	0x07b621f5,
+	0xf50037f0,
+	0xf1075a21,
+	0xf41388e7,
+	0x3cf07e21,
+	0x0131f401,
+/* 0x0908: i2c_bitr_done */
+/* 0x090a: i2c_get_byte */
+	0x57f000f8,
+	0x0847f000,
+/* 0x0910: i2c_get_byte_next */
+	0xbb0154b6,
 	0x65b60076,
 	0x9450f904,
 	0x56bb0465,
 	0xfd50bd02,
 	0x50fc0475,
-	0x088421f5,
+	0x08c321f5,
 	0xf40464b6,
-	0x46b03411,
-	0xd81bf400,
-	0xb60076bb,
-	0x50f90465,
-	0xbb046594,
-	0x50bd0256,
-	0xfc0475fd,
-	0xc521f550,
-	0x0464b608,
-	0xbb0f11f4,
-	0x36b00076,
-	0x061bf401,
-/* 0x09b7: i2c_put_byte_done */
-	0xf80132f4,
-/* 0x09b9: i2c_addr */
-	0x0076bb00,
+	0x53fd2b11,
+	0x0142b605,
+	0xf0d81bf4,
+	0x76bb0137,
+	0x0465b600,
+	0x659450f9,
+	0x0256bb04,
+	0x75fd50bd,
+	0xf550fc04,
+	0xb6088221,
+/* 0x095a: i2c_get_byte_done */
+	0x00f80464,
+/* 0x095c: i2c_put_byte */
+/* 0x095f: i2c_put_byte_next */
+	0xb60847f0,
+	0x54ff0142,
+	0x0076bb38,
 	0xf90465b6,
 	0x04659450,
 	0xbd0256bb,
 	0x0475fd50,
 	0x21f550fc,
-	0x64b607f5,
-	0x2911f404,
-	0x012ec3e7,
-	0xfd0134b6,
-	0x76bb0553,
+	0x64b60882,
+	0x3411f404,
+	0xf40046b0,
+	0x76bbd81b,
 	0x0465b600,
 	0x659450f9,
 	0x0256bb04,
 	0x75fd50bd,
 	0xf550fc04,
-	0xb6095e21,
-/* 0x09fe: i2c_addr_done */
-	0x00f80464,
-/* 0x0a00: i2c_acquire_addr */
-	0xb6f8cec7,
-	0xe0b702e4,
-	0xee980d1c,
-/* 0x0a0f: i2c_acquire */
-	0xf500f800,
-	0xf40a0021,
-	0xd9f00421,
-	0x4021f403,
-/* 0x0a1e: i2c_release */
-	0x21f500f8,
-	0x21f40a00,
-	0x03daf004,
-	0xf84021f4,
-/* 0x0a2d: i2c_recv */
-	0x0132f400,
-	0xb6f8c1c7,
-	0x16b00214,
-	0x3a1ff528,
-	0xf413a001,
-	0x0032980c,
-	0x0ccc13a0,
-	0xf4003198,
-	0xd0f90231,
-	0xd0f9e0f9,
-	0x000067f1,
-	0x100063f1,
-	0xbb016792,
+	0xb608c321,
+	0x11f40464,
+	0x0076bb0f,
+	0xf40136b0,
+	0x32f4061b,
+/* 0x09b5: i2c_put_byte_done */
+/* 0x09b7: i2c_addr */
+	0xbb00f801,
 	0x65b60076,
 	0x9450f904,
 	0x56bb0465,
 	0xfd50bd02,
 	0x50fc0475,
-	0x0a0f21f5,
-	0xfc0464b6,
-	0x00d6b0d0,
-	0x00b31bf5,
-	0xbb0057f0,
-	0x65b60076,
-	0x9450f904,
-	0x56bb0465,
-	0xfd50bd02,
-	0x50fc0475,
-	0x09b921f5,
-	0xf50464b6,
-	0xc700d011,
-	0x76bbe0c5,
-	0x0465b600,
-	0x659450f9,
-	0x0256bb04,
-	0x75fd50bd,
-	0xf550fc04,
-	0xb6095e21,
-	0x11f50464,
-	0x57f000ad,
+	0x07f321f5,
+	0xf40464b6,
+	0xc3e72911,
+	0x34b6012e,
+	0x0553fd01,
+	0xb60076bb,
+	0x50f90465,
+	0xbb046594,
+	0x50bd0256,
+	0xfc0475fd,
+	0x5c21f550,
+	0x0464b609,
+/* 0x09fc: i2c_addr_done */
+/* 0x09fe: i2c_acquire_addr */
+	0xcec700f8,
+	0x02e4b6f8,
+	0x0d1ce0b7,
+	0xf800ee98,
+/* 0x0a0d: i2c_acquire */
+	0xfe21f500,
+	0x0421f409,
+	0xf403d9f0,
+	0x00f84021,
+/* 0x0a1c: i2c_release */
+	0x09fe21f5,
+	0xf00421f4,
+	0x21f403da,
+/* 0x0a2b: i2c_recv */
+	0xf400f840,
+	0xc1c70132,
+	0x0214b6f8,
+	0xf52816b0,
+	0xa0013a1f,
+	0x980cf413,
+	0x13a00032,
+	0x31980ccc,
+	0x0231f400,
+	0xe0f9d0f9,
+	0x67f1d0f9,
+	0x63f10000,
+	0x67921000,
 	0x0076bb01,
 	0xf90465b6,
 	0x04659450,
 	0xbd0256bb,
 	0x0475fd50,
 	0x21f550fc,
-	0x64b609b9,
-	0x8a11f504,
+	0x64b60a0d,
+	0xb0d0fc04,
+	0x1bf500d6,
+	0x57f000b3,
 	0x0076bb00,
 	0xf90465b6,
 	0x04659450,
 	0xbd0256bb,
 	0x0475fd50,
 	0x21f550fc,
-	0x64b6090c,
-	0x6a11f404,
-	0xbbe05bcb,
+	0x64b609b7,
+	0xd011f504,
+	0xe0c5c700,
+	0xb60076bb,
+	0x50f90465,
+	0xbb046594,
+	0x50bd0256,
+	0xfc0475fd,
+	0x5c21f550,
+	0x0464b609,
+	0x00ad11f5,
+	0xbb0157f0,
 	0x65b60076,
 	0x9450f904,
 	0x56bb0465,
 	0xfd50bd02,
 	0x50fc0475,
-	0x085121f5,
-	0xb90464b6,
-	0x74bd025b,
-/* 0x0b33: i2c_recv_not_rd08 */
-	0xb0430ef4,
-	0x1bf401d6,
-	0x0057f03d,
-	0x09b921f5,
-	0xc73311f4,
-	0x21f5e0c5,
-	0x11f4095e,
-	0x0057f029,
-	0x09b921f5,
-	0xc71f11f4,
-	0x21f5e0b5,
-	0x11f4095e,
-	0x5121f515,
-	0xc774bd08,
-	0x1bf408c5,
-	0x0232f409,
-/* 0x0b73: i2c_recv_not_wr08 */
-/* 0x0b73: i2c_recv_done */
-	0xc7030ef4,
-	0x21f5f8ce,
-	0xe0fc0a1e,
-	0x12f4d0fc,
-	0x027cb90a,
-	0x033621f5,
-/* 0x0b88: i2c_recv_exit */
-/* 0x0b8a: i2c_init */
-	0x00f800f8,
-/* 0x0b8c: test_recv */
-	0x05d817f1,
+	0x09b721f5,
+	0xf50464b6,
+	0xbb008a11,
+	0x65b60076,
+	0x9450f904,
+	0x56bb0465,
+	0xfd50bd02,
+	0x50fc0475,
+	0x090a21f5,
+	0xf40464b6,
+	0x5bcb6a11,
+	0x0076bbe0,
+	0xf90465b6,
+	0x04659450,
+	0xbd0256bb,
+	0x0475fd50,
+	0x21f550fc,
+	0x64b6084f,
+	0x025bb904,
+	0x0ef474bd,
+/* 0x0b31: i2c_recv_not_rd08 */
+	0x01d6b043,
+	0xf03d1bf4,
+	0x21f50057,
+	0x11f409b7,
+	0xe0c5c733,
+	0x095c21f5,
+	0xf02911f4,
+	0x21f50057,
+	0x11f409b7,
+	0xe0b5c71f,
+	0x095c21f5,
+	0xf51511f4,
+	0xbd084f21,
+	0x08c5c774,
+	0xf4091bf4,
+	0x0ef40232,
+/* 0x0b71: i2c_recv_not_wr08 */
+/* 0x0b71: i2c_recv_done */
+	0xf8cec703,
+	0x0a1c21f5,
+	0xd0fce0fc,
+	0xb90a12f4,
+	0x21f5027c,
+/* 0x0b86: i2c_recv_exit */
+	0x00f80336,
+/* 0x0b88: i2c_init */
+/* 0x0b8a: test_recv */
+	0x17f100f8,
+	0x14b605d8,
+	0x0011cf06,
+	0xf10110b6,
+	0xb605d807,
+	0x01d00604,
+	0xf104bd00,
+	0xf1d900e7,
+	0xf5134fe3,
+	0xf8025621,
+/* 0x0bb1: test_init */
+	0x00e7f100,
+	0x5621f508,
+/* 0x0bbb: idle_recv */
+	0xf800f802,
+/* 0x0bbd: idle */
+	0x0031f400,
+	0x05d417f1,
 	0xcf0614b6,
 	0x10b60011,
-	0xd807f101,
+	0xd407f101,
 	0x0604b605,
 	0xbd0001d0,
-	0x00e7f104,
-	0x4fe3f1d9,
-	0x5621f513,
-/* 0x0bb3: test_init */
-	0xf100f802,
-	0xf50800e7,
-	0xf8025621,
-/* 0x0bbd: idle_recv */
-/* 0x0bbf: idle */
-	0xf400f800,
-	0x17f10031,
-	0x14b605d4,
-	0x0011cf06,
-	0xf10110b6,
-	0xb605d407,
-	0x01d00604,
-/* 0x0bdb: idle_loop */
-	0xf004bd00,
-	0x32f45817,
-/* 0x0be1: idle_proc */
-/* 0x0be1: idle_proc_exec */
-	0xb910f902,
-	0x21f5021e,
-	0x10fc033f,
-	0xf40911f4,
-	0x0ef40231,
-/* 0x0bf5: idle_proc_next */
-	0x5810b6ef,
-	0xf4061fb8,
-	0x02f4e61b,
-	0x0028f4dd,
-	0x00bb0ef4,
+/* 0x0bd9: idle_loop */
+	0x5817f004,
+/* 0x0bdf: idle_proc */
+/* 0x0bdf: idle_proc_exec */
+	0xf90232f4,
+	0x021eb910,
+	0x033f21f5,
+	0x11f410fc,
+	0x0231f409,
+/* 0x0bf3: idle_proc_next */
+	0xb6ef0ef4,
+	0x1fb85810,
+	0xe61bf406,
+	0xf4dd02f4,
+	0x0ef40028,
+	0x000000bb,
 	0x00000000,
 	0x00000000,
 	0x00000000,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/gk208.fuc5.h b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/gk208.fuc5.h
index c4edbc79e41a..e0222cb832fb 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/gk208.fuc5.h
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/gk208.fuc5.h
@@ -47,8 +47,8 @@ static uint32_t gk208_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x584d454d,
-	0x000005f3,
-	0x000005e5,
+	0x000005ee,
+	0x000005e0,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -69,8 +69,8 @@ static uint32_t gk208_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x46524550,
-	0x000005f7,
-	0x000005f5,
+	0x000005f2,
+	0x000005f0,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -91,8 +91,8 @@ static uint32_t gk208_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x5f433249,
-	0x000009f8,
-	0x000008a2,
+	0x000009f3,
+	0x0000089d,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -113,8 +113,8 @@ static uint32_t gk208_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x54534554,
-	0x00000a16,
-	0x000009fa,
+	0x00000a11,
+	0x000009f5,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -135,8 +135,8 @@ static uint32_t gk208_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x454c4449,
-	0x00000a21,
-	0x00000a1f,
+	0x00000a1c,
+	0x00000a1a,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -234,22 +234,22 @@ static uint32_t gk208_pmu_data[] = {
 /* 0x037c: memx_func_next */
 	0x00000002,
 	0x00000000,
-	0x000004cf,
+	0x000004cc,
 	0x00000003,
 	0x00000002,
-	0x00000546,
+	0x00000541,
 	0x00040004,
 	0x00000000,
-	0x00000563,
+	0x0000055e,
 	0x00010005,
 	0x00000000,
-	0x0000057d,
+	0x00000578,
 	0x00010006,
 	0x00000000,
-	0x00000541,
+	0x0000053c,
 	0x00000007,
 	0x00000000,
-	0x00000589,
+	0x00000584,
 /* 0x03c4: memx_func_tail */
 /* 0x03c4: memx_ts_start */
 	0x00000000,
@@ -1239,454 +1239,454 @@ static uint32_t gk208_pmu_code[] = {
 	0x0001f604,
 	0x00f804bd,
 /* 0x045c: memx_func_enter */
-	0x162067f1,
-	0xf55d77f1,
-	0x047e6eb2,
-	0xd8b20000,
-	0xf90487fd,
-	0xfc80f960,
-	0x7ee0fcd0,
-	0x0700002d,
-	0x7e6eb2fe,
+	0x47162046,
+	0x6eb2f55d,
+	0x0000047e,
+	0x87fdd8b2,
+	0xf960f904,
+	0xfcd0fc80,
+	0x002d7ee0,
+	0xb2fe0700,
+	0x00047e6e,
+	0xfdd8b200,
+	0x60f90487,
+	0xd0fc80f9,
+	0x2d7ee0fc,
+	0xf0460000,
+	0x7e6eb226,
 	0xb2000004,
 	0x0487fdd8,
 	0x80f960f9,
 	0xe0fcd0fc,
 	0x00002d7e,
-	0x26f067f1,
-	0x047e6eb2,
-	0xd8b20000,
-	0xf90487fd,
-	0xfc80f960,
-	0x7ee0fcd0,
-	0x0600002d,
-	0x07e04004,
-	0xbd0006f6,
-/* 0x04b9: memx_func_enter_wait */
-	0x07c04604,
-	0xf00066cf,
-	0x0bf40464,
-	0xcf2c06f7,
-	0x06b50066,
-/* 0x04cf: memx_func_leave */
-	0x0600f8f1,
-	0x0066cf2c,
-	0x06f206b5,
-	0x07e44004,
-	0xbd0006f6,
-/* 0x04e1: memx_func_leave_wait */
-	0x07c04604,
-	0xf00066cf,
-	0x1bf40464,
-	0xf067f1f7,
+	0xe0400406,
+	0x0006f607,
+/* 0x04b6: memx_func_enter_wait */
+	0xc04604bd,
+	0x0066cf07,
+	0xf40464f0,
+	0x2c06f70b,
+	0xb50066cf,
+	0x00f8f106,
+/* 0x04cc: memx_func_leave */
+	0x66cf2c06,
+	0xf206b500,
+	0xe4400406,
+	0x0006f607,
+/* 0x04de: memx_func_leave_wait */
+	0xc04604bd,
+	0x0066cf07,
+	0xf40464f0,
+	0xf046f71b,
 	0xb2010726,
 	0x00047e6e,
 	0xfdd8b200,
 	0x60f90587,
 	0xd0fc80f9,
 	0x2d7ee0fc,
-	0x67f10000,
-	0x6eb21620,
-	0x0000047e,
-	0x87fdd8b2,
-	0xf960f905,
-	0xfcd0fc80,
-	0x002d7ee0,
-	0x0aa24700,
-	0x047e6eb2,
-	0xd8b20000,
-	0xf90587fd,
-	0xfc80f960,
-	0x7ee0fcd0,
-	0xf800002d,
-/* 0x0541: memx_func_wait_vblank */
+	0x20460000,
+	0x7e6eb216,
+	0xb2000004,
+	0x0587fdd8,
+	0x80f960f9,
+	0xe0fcd0fc,
+	0x00002d7e,
+	0xb20aa247,
+	0x00047e6e,
+	0xfdd8b200,
+	0x60f90587,
+	0xd0fc80f9,
+	0x2d7ee0fc,
+	0x00f80000,
+/* 0x053c: memx_func_wait_vblank */
+	0xf80410b6,
+/* 0x0541: memx_func_wr32 */
+	0x00169800,
+	0xb6011598,
+	0x60f90810,
+	0xd0fc50f9,
+	0x2d7ee0fc,
+	0x42b60000,
+	0xe81bf402,
+/* 0x055e: memx_func_wait */
+	0x2c0800f8,
+	0x980088cf,
+	0x1d98001e,
+	0x021c9801,
+	0xb6031b98,
+	0x747e1010,
+	0x00f80000,
+/* 0x0578: memx_func_delay */
+	0xb6001e98,
+	0x587e0410,
+	0x00f80000,
+/* 0x0584: memx_func_train */
+/* 0x0586: memx_exec */
+	0xe0f900f8,
+	0xc1b2d0f9,
+/* 0x058e: memx_exec_next */
+	0x1398b2b2,
 	0x0410b600,
-/* 0x0546: memx_func_wr32 */
-	0x169800f8,
-	0x01159800,
-	0xf90810b6,
-	0xfc50f960,
+	0x01f034e7,
+	0x01e033e7,
+	0xf00132b6,
+	0x35980c30,
+	0xa655f9de,
+	0xe51ef412,
+	0x98f10b98,
+	0xcbbbf20c,
+	0x07c44b02,
+	0xfc00bbcf,
 	0x7ee0fcd0,
-	0xb600002d,
-	0x1bf40242,
-/* 0x0563: memx_func_wait */
-	0x0800f8e8,
-	0x0088cf2c,
-	0x98001e98,
-	0x1c98011d,
-	0x031b9802,
-	0x7e1010b6,
-	0xf8000074,
-/* 0x057d: memx_func_delay */
-	0x001e9800,
-	0x7e0410b6,
-	0xf8000058,
-/* 0x0589: memx_func_train */
-/* 0x058b: memx_exec */
-	0xf900f800,
-	0xb2d0f9e0,
-/* 0x0593: memx_exec_next */
-	0x98b2b2c1,
-	0x10b60013,
-	0xf034e704,
-	0xe033e701,
-	0x0132b601,
-	0x980c30f0,
-	0x55f9de35,
-	0x1ef412a6,
-	0xf10b98e5,
-	0xbbf20c98,
-	0xc44b02cb,
-	0x00bbcf07,
-	0xe0fcd0fc,
-	0x00029f7e,
-/* 0x05ca: memx_info */
-	0xc67000f8,
-	0x0c0bf401,
-/* 0x05d0: memx_info_data */
-	0x4b03cc4c,
-	0x0ef40800,
-/* 0x05d9: memx_info_train */
-	0x0bcc4c09,
-/* 0x05df: memx_info_send */
-	0x7e01004b,
 	0xf800029f,
-/* 0x05e5: memx_recv */
-	0x01d6b000,
-	0xb0a30bf4,
-	0x0bf400d6,
-/* 0x05f3: memx_init */
-	0xf800f8dc,
-/* 0x05f5: perf_recv */
-/* 0x05f7: perf_init */
-	0xf800f800,
-/* 0x05f9: i2c_drive_scl */
-	0x0036b000,
-	0x400d0bf4,
-	0x01f607e0,
-	0xf804bd00,
-/* 0x0609: i2c_drive_scl_lo */
-	0x07e44000,
-	0xbd0001f6,
-/* 0x0613: i2c_drive_sda */
-	0xb000f804,
-	0x0bf40036,
-	0x07e0400d,
-	0xbd0002f6,
-/* 0x0623: i2c_drive_sda_lo */
-	0x4000f804,
-	0x02f607e4,
-	0xf804bd00,
-/* 0x062d: i2c_sense_scl */
-	0x0132f400,
-	0xcf07c443,
-	0x31fd0033,
-	0x060bf404,
-/* 0x063f: i2c_sense_scl_done */
-	0xf80131f4,
-/* 0x0641: i2c_sense_sda */
-	0x0132f400,
-	0xcf07c443,
-	0x32fd0033,
-	0x060bf404,
-/* 0x0653: i2c_sense_sda_done */
-	0xf80131f4,
-/* 0x0655: i2c_raise_scl */
-	0x4440f900,
-	0x01030898,
-	0x0005f97e,
-/* 0x0660: i2c_raise_scl_wait */
-	0x7e03e84e,
-	0x7e000058,
-	0xf400062d,
-	0x42b60901,
-	0xef1bf401,
-/* 0x0674: i2c_raise_scl_done */
-	0x00f840fc,
-/* 0x0678: i2c_start */
-	0x00062d7e,
-	0x7e0d11f4,
-	0xf4000641,
-	0x0ef40611,
-/* 0x0689: i2c_start_rep */
-	0x7e00032e,
-	0x030005f9,
-	0x06137e01,
+/* 0x05c5: memx_info */
+	0x01c67000,
+/* 0x05cb: memx_info_data */
+	0x4c0c0bf4,
+	0x004b03cc,
+	0x090ef408,
+/* 0x05d4: memx_info_train */
+	0x4b0bcc4c,
+/* 0x05da: memx_info_send */
+	0x9f7e0100,
+	0x00f80002,
+/* 0x05e0: memx_recv */
+	0xf401d6b0,
+	0xd6b0a30b,
+	0xdc0bf400,
+/* 0x05ee: memx_init */
+	0x00f800f8,
+/* 0x05f0: perf_recv */
+/* 0x05f2: perf_init */
+	0x00f800f8,
+/* 0x05f4: i2c_drive_scl */
+	0xf40036b0,
+	0xe0400d0b,
+	0x0001f607,
+	0x00f804bd,
+/* 0x0604: i2c_drive_scl_lo */
+	0xf607e440,
+	0x04bd0001,
+/* 0x060e: i2c_drive_sda */
+	0x36b000f8,
+	0x0d0bf400,
+	0xf607e040,
+	0x04bd0002,
+/* 0x061e: i2c_drive_sda_lo */
+	0xe44000f8,
+	0x0002f607,
+	0x00f804bd,
+/* 0x0628: i2c_sense_scl */
+	0x430132f4,
+	0x33cf07c4,
+	0x0431fd00,
+	0xf4060bf4,
+/* 0x063a: i2c_sense_scl_done */
+	0x00f80131,
+/* 0x063c: i2c_sense_sda */
+	0x430132f4,
+	0x33cf07c4,
+	0x0432fd00,
+	0xf4060bf4,
+/* 0x064e: i2c_sense_sda_done */
+	0x00f80131,
+/* 0x0650: i2c_raise_scl */
+	0x984440f9,
+	0x7e010308,
+/* 0x065b: i2c_raise_scl_wait */
+	0x4e0005f4,
+	0x587e03e8,
+	0x287e0000,
+	0x01f40006,
+	0x0142b609,
+/* 0x066f: i2c_raise_scl_done */
+	0xfcef1bf4,
+/* 0x0673: i2c_start */
+	0x7e00f840,
+	0xf4000628,
+	0x3c7e0d11,
+	0x11f40006,
+	0x2e0ef406,
+/* 0x0684: i2c_start_rep */
+	0xf47e0003,
+	0x01030005,
+	0x00060e7e,
+	0xb60076bb,
+	0x50f90465,
+	0xbb046594,
+	0x50bd0256,
+	0xfc0475fd,
+	0x06507e50,
+	0x0464b600,
+/* 0x06af: i2c_start_send */
+	0x031d11f4,
+	0x060e7e00,
+	0x13884e00,
+	0x0000587e,
+	0xf47e0003,
+	0x884e0005,
+	0x00587e13,
+/* 0x06c9: i2c_start_out */
+/* 0x06cb: i2c_stop */
+	0x0300f800,
+	0x05f47e00,
+	0x7e000300,
+	0x4e00060e,
+	0x587e03e8,
+	0x01030000,
+	0x0005f47e,
+	0x7e13884e,
+	0x03000058,
+	0x060e7e01,
+	0x13884e00,
+	0x0000587e,
+/* 0x06fa: i2c_bitw */
+	0x0e7e00f8,
+	0xe84e0006,
+	0x00587e03,
 	0x0076bb00,
 	0xf90465b6,
 	0x04659450,
 	0xbd0256bb,
 	0x0475fd50,
-	0x557e50fc,
+	0x507e50fc,
 	0x64b60006,
-	0x1d11f404,
-/* 0x06b4: i2c_start_send */
-	0x137e0003,
-	0x884e0006,
-	0x00587e13,
-	0x7e000300,
-	0x4e0005f9,
-	0x587e1388,
-/* 0x06ce: i2c_start_out */
-	0x00f80000,
-/* 0x06d0: i2c_stop */
-	0xf97e0003,
-	0x00030005,
-	0x0006137e,
-	0x7e03e84e,
+	0x1711f404,
+	0x7e13884e,
 	0x03000058,
-	0x05f97e01,
+	0x05f47e00,
 	0x13884e00,
 	0x0000587e,
-	0x137e0103,
-	0x884e0006,
-	0x00587e13,
-/* 0x06ff: i2c_bitw */
-	0x7e00f800,
-	0x4e000613,
-	0x587e03e8,
-	0x76bb0000,
+/* 0x0738: i2c_bitw_out */
+/* 0x073a: i2c_bitr */
+	0x010300f8,
+	0x00060e7e,
+	0x7e03e84e,
+	0xbb000058,
+	0x65b60076,
+	0x9450f904,
+	0x56bb0465,
+	0xfd50bd02,
+	0x50fc0475,
+	0x0006507e,
+	0xf40464b6,
+	0x3c7e1a11,
+	0x00030006,
+	0x0005f47e,
+	0x7e13884e,
+	0xf0000058,
+	0x31f4013c,
+/* 0x077d: i2c_bitr_done */
+/* 0x077f: i2c_get_byte */
+	0x0500f801,
+/* 0x0783: i2c_get_byte_next */
+	0xb6080400,
+	0x76bb0154,
 	0x0465b600,
 	0x659450f9,
 	0x0256bb04,
 	0x75fd50bd,
 	0x7e50fc04,
-	0xb6000655,
+	0xb600073a,
 	0x11f40464,
-	0x13884e17,
-	0x0000587e,
-	0xf97e0003,
-	0x884e0005,
-	0x00587e13,
-/* 0x073d: i2c_bitw_out */
-/* 0x073f: i2c_bitr */
-	0x0300f800,
-	0x06137e01,
-	0x03e84e00,
-	0x0000587e,
+	0x0553fd2a,
+	0xf40142b6,
+	0x0103d81b,
 	0xb60076bb,
 	0x50f90465,
 	0xbb046594,
 	0x50bd0256,
 	0xfc0475fd,
-	0x06557e50,
+	0x06fa7e50,
 	0x0464b600,
-	0x7e1a11f4,
-	0x03000641,
-	0x05f97e00,
-	0x13884e00,
-	0x0000587e,
-	0xf4013cf0,
-/* 0x0782: i2c_bitr_done */
-	0x00f80131,
-/* 0x0784: i2c_get_byte */
-	0x08040005,
-/* 0x0788: i2c_get_byte_next */
-	0xbb0154b6,
-	0x65b60076,
-	0x9450f904,
-	0x56bb0465,
-	0xfd50bd02,
-	0x50fc0475,
-	0x00073f7e,
-	0xf40464b6,
-	0x53fd2a11,
-	0x0142b605,
-	0x03d81bf4,
-	0x0076bb01,
-	0xf90465b6,
-	0x04659450,
-	0xbd0256bb,
-	0x0475fd50,
-	0xff7e50fc,
-	0x64b60006,
-/* 0x07d1: i2c_get_byte_done */
-/* 0x07d3: i2c_put_byte */
-	0x0400f804,
-/* 0x07d5: i2c_put_byte_next */
-	0x0142b608,
-	0xbb3854ff,
+/* 0x07cc: i2c_get_byte_done */
+/* 0x07ce: i2c_put_byte */
+	0x080400f8,
+/* 0x07d0: i2c_put_byte_next */
+	0xff0142b6,
+	0x76bb3854,
+	0x0465b600,
+	0x659450f9,
+	0x0256bb04,
+	0x75fd50bd,
+	0x7e50fc04,
+	0xb60006fa,
+	0x11f40464,
+	0x0046b034,
+	0xbbd81bf4,
 	0x65b60076,
 	0x9450f904,
 	0x56bb0465,
 	0xfd50bd02,
 	0x50fc0475,
-	0x0006ff7e,
+	0x00073a7e,
 	0xf40464b6,
-	0x46b03411,
-	0xd81bf400,
+	0x76bb0f11,
+	0x0136b000,
+	0xf4061bf4,
+/* 0x0826: i2c_put_byte_done */
+	0x00f80132,
+/* 0x0828: i2c_addr */
 	0xb60076bb,
 	0x50f90465,
 	0xbb046594,
 	0x50bd0256,
 	0xfc0475fd,
-	0x073f7e50,
+	0x06737e50,
 	0x0464b600,
-	0xbb0f11f4,
-	0x36b00076,
-	0x061bf401,
-/* 0x082b: i2c_put_byte_done */
-	0xf80132f4,
-/* 0x082d: i2c_addr */
-	0x0076bb00,
+	0xe72911f4,
+	0xb6012ec3,
+	0x53fd0134,
+	0x0076bb05,
 	0xf90465b6,
 	0x04659450,
 	0xbd0256bb,
 	0x0475fd50,
-	0x787e50fc,
-	0x64b60006,
-	0x2911f404,
-	0x012ec3e7,
-	0xfd0134b6,
-	0x76bb0553,
-	0x0465b600,
-	0x659450f9,
-	0x0256bb04,
-	0x75fd50bd,
-	0x7e50fc04,
-	0xb60007d3,
-/* 0x0872: i2c_addr_done */
-	0x00f80464,
-/* 0x0874: i2c_acquire_addr */
-	0xb6f8cec7,
-	0xe0b705e4,
-	0x00f8d014,
-/* 0x0880: i2c_acquire */
-	0x0008747e,
+	0xce7e50fc,
+	0x64b60007,
+/* 0x086d: i2c_addr_done */
+/* 0x086f: i2c_acquire_addr */
+	0xc700f804,
+	0xe4b6f8ce,
+	0x14e0b705,
+/* 0x087b: i2c_acquire */
+	0x7e00f8d0,
+	0x7e00086f,
+	0xf0000004,
+	0x2d7e03d9,
+	0x00f80000,
+/* 0x088c: i2c_release */
+	0x00086f7e,
 	0x0000047e,
-	0x7e03d9f0,
+	0x7e03daf0,
 	0xf800002d,
-/* 0x0891: i2c_release */
-	0x08747e00,
-	0x00047e00,
-	0x03daf000,
-	0x00002d7e,
-/* 0x08a2: i2c_recv */
-	0x32f400f8,
-	0xf8c1c701,
-	0xb00214b6,
-	0x1ff52816,
-	0x13b80134,
-	0x98000cf4,
-	0x13b80032,
-	0x98000ccc,
-	0x31f40031,
-	0xf9d0f902,
-	0xd6d0f9e0,
-	0x10000000,
-	0xbb016792,
-	0x65b60076,
-	0x9450f904,
-	0x56bb0465,
-	0xfd50bd02,
-	0x50fc0475,
-	0x0008807e,
-	0xfc0464b6,
-	0x00d6b0d0,
-	0x00b01bf5,
-	0x76bb0005,
+/* 0x089d: i2c_recv */
+	0x0132f400,
+	0xb6f8c1c7,
+	0x16b00214,
+	0x341ff528,
+	0xf413b801,
+	0x3298000c,
+	0xcc13b800,
+	0x3198000c,
+	0x0231f400,
+	0xe0f9d0f9,
+	0x00d6d0f9,
+	0x92100000,
+	0x76bb0167,
 	0x0465b600,
 	0x659450f9,
 	0x0256bb04,
 	0x75fd50bd,
 	0x7e50fc04,
-	0xb600082d,
-	0x11f50464,
-	0xc5c700cc,
-	0x0076bbe0,
-	0xf90465b6,
-	0x04659450,
-	0xbd0256bb,
-	0x0475fd50,
-	0xd37e50fc,
-	0x64b60007,
-	0xa911f504,
-	0xbb010500,
-	0x65b60076,
-	0x9450f904,
-	0x56bb0465,
-	0xfd50bd02,
-	0x50fc0475,
-	0x00082d7e,
-	0xf50464b6,
-	0xbb008711,
-	0x65b60076,
-	0x9450f904,
-	0x56bb0465,
-	0xfd50bd02,
-	0x50fc0475,
-	0x0007847e,
-	0xf40464b6,
-	0x5bcb6711,
-	0x0076bbe0,
+	0xb600087b,
+	0xd0fc0464,
+	0xf500d6b0,
+	0x0500b01b,
+	0x0076bb00,
 	0xf90465b6,
 	0x04659450,
 	0xbd0256bb,
 	0x0475fd50,
-	0xd07e50fc,
-	0x64b60006,
-	0xbd5bb204,
-	0x410ef474,
-/* 0x09a4: i2c_recv_not_rd08 */
-	0xf401d6b0,
-	0x00053b1b,
-	0x00082d7e,
-	0xc73211f4,
-	0xd37ee0c5,
-	0x11f40007,
-	0x7e000528,
-	0xf400082d,
-	0xb5c71f11,
-	0x07d37ee0,
-	0x1511f400,
-	0x0006d07e,
-	0xc5c774bd,
-	0x091bf408,
-	0xf40232f4,
-/* 0x09e2: i2c_recv_not_wr08 */
-/* 0x09e2: i2c_recv_done */
-	0xcec7030e,
-	0x08917ef8,
-	0xfce0fc00,
-	0x0912f4d0,
-	0x9f7e7cb2,
-/* 0x09f6: i2c_recv_exit */
-	0x00f80002,
-/* 0x09f8: i2c_init */
-/* 0x09fa: test_recv */
-	0x584100f8,
-	0x0011cf04,
-	0x400110b6,
-	0x01f60458,
-	0xde04bd00,
-	0x134fd900,
-	0x0001de7e,
-/* 0x0a16: test_init */
-	0x004e00f8,
-	0x01de7e08,
-/* 0x0a1f: idle_recv */
+	0x287e50fc,
+	0x64b60008,
+	0xcc11f504,
+	0xe0c5c700,
+	0xb60076bb,
+	0x50f90465,
+	0xbb046594,
+	0x50bd0256,
+	0xfc0475fd,
+	0x07ce7e50,
+	0x0464b600,
+	0x00a911f5,
+	0x76bb0105,
+	0x0465b600,
+	0x659450f9,
+	0x0256bb04,
+	0x75fd50bd,
+	0x7e50fc04,
+	0xb6000828,
+	0x11f50464,
+	0x76bb0087,
+	0x0465b600,
+	0x659450f9,
+	0x0256bb04,
+	0x75fd50bd,
+	0x7e50fc04,
+	0xb600077f,
+	0x11f40464,
+	0xe05bcb67,
+	0xb60076bb,
+	0x50f90465,
+	0xbb046594,
+	0x50bd0256,
+	0xfc0475fd,
+	0x06cb7e50,
+	0x0464b600,
+	0x74bd5bb2,
+/* 0x099f: i2c_recv_not_rd08 */
+	0xb0410ef4,
+	0x1bf401d6,
+	0x7e00053b,
+	0xf4000828,
+	0xc5c73211,
+	0x07ce7ee0,
+	0x2811f400,
+	0x287e0005,
+	0x11f40008,
+	0xe0b5c71f,
+	0x0007ce7e,
+	0x7e1511f4,
+	0xbd0006cb,
+	0x08c5c774,
+	0xf4091bf4,
+	0x0ef40232,
+/* 0x09dd: i2c_recv_not_wr08 */
+/* 0x09dd: i2c_recv_done */
+	0xf8cec703,
+	0x00088c7e,
+	0xd0fce0fc,
+	0xb20912f4,
+	0x029f7e7c,
+/* 0x09f1: i2c_recv_exit */
+/* 0x09f3: i2c_init */
 	0xf800f800,
-/* 0x0a21: idle */
-	0x0031f400,
-	0xcf045441,
-	0x10b60011,
-	0x04544001,
-	0xbd0001f6,
-/* 0x0a35: idle_loop */
-	0xf4580104,
-/* 0x0a3a: idle_proc */
-/* 0x0a3a: idle_proc_exec */
-	0x10f90232,
-	0xa87e1eb2,
-	0x10fc0002,
-	0xf40911f4,
-	0x0ef40231,
-/* 0x0a4d: idle_proc_next */
-	0x5810b6f0,
-	0x1bf41fa6,
-	0xe002f4e8,
-	0xf40028f4,
-	0x0000c60e,
+/* 0x09f5: test_recv */
+	0x04584100,
+	0xb60011cf,
+	0x58400110,
+	0x0001f604,
+	0x00de04bd,
+	0x7e134fd9,
+	0xf80001de,
+/* 0x0a11: test_init */
+	0x08004e00,
+	0x0001de7e,
+/* 0x0a1a: idle_recv */
+	0x00f800f8,
+/* 0x0a1c: idle */
+	0x410031f4,
+	0x11cf0454,
+	0x0110b600,
+	0xf6045440,
+	0x04bd0001,
+/* 0x0a30: idle_loop */
+	0x32f45801,
+/* 0x0a35: idle_proc */
+/* 0x0a35: idle_proc_exec */
+	0xb210f902,
+	0x02a87e1e,
+	0xf410fc00,
+	0x31f40911,
+	0xf00ef402,
+/* 0x0a48: idle_proc_next */
+	0xa65810b6,
+	0xe81bf41f,
+	0xf4e002f4,
+	0x0ef40028,
+	0x000000c6,
+	0x00000000,
 	0x00000000,
 	0x00000000,
 	0x00000000,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/gt215.fuc3.h b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/gt215.fuc3.h
index 6a2572e8945a..defddf5957ee 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/gt215.fuc3.h
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/gt215.fuc3.h
@@ -47,8 +47,8 @@ static uint32_t gt215_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x584d454d,
-	0x0000083a,
-	0x0000082c,
+	0x00000833,
+	0x00000825,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -69,8 +69,8 @@ static uint32_t gt215_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x46524550,
-	0x0000083e,
-	0x0000083c,
+	0x00000837,
+	0x00000835,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -91,8 +91,8 @@ static uint32_t gt215_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x5f433249,
-	0x00000c6e,
-	0x00000b11,
+	0x00000c67,
+	0x00000b0a,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -113,8 +113,8 @@ static uint32_t gt215_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x54534554,
-	0x00000c97,
-	0x00000c70,
+	0x00000c90,
+	0x00000c69,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -135,8 +135,8 @@ static uint32_t gt215_pmu_data[] = {
 	0x00000000,
 	0x00000000,
 	0x454c4449,
-	0x00000ca3,
-	0x00000ca1,
+	0x00000c9c,
+	0x00000c9a,
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -234,22 +234,22 @@ static uint32_t gt215_pmu_data[] = {
 /* 0x037c: memx_func_next */
 	0x00000002,
 	0x00000000,
-	0x000005a0,
+	0x0000059f,
 	0x00000003,
 	0x00000002,
-	0x00000632,
+	0x0000062f,
 	0x00040004,
 	0x00000000,
-	0x0000064e,
+	0x0000064b,
 	0x00010005,
 	0x00000000,
-	0x0000066b,
+	0x00000668,
 	0x00010006,
 	0x00000000,
-	0x000005f0,
+	0x000005ef,
 	0x00000007,
 	0x00000000,
-	0x00000676,
+	0x00000673,
 /* 0x03c4: memx_func_tail */
 /* 0x03c4: memx_ts_start */
 	0x00000000,
@@ -1305,560 +1305,560 @@ static uint32_t gt215_pmu_code[] = {
 	0x67f102d7,
 	0x63f1fffc,
 	0x76fdffff,
-	0x0267f104,
-	0x0576fd00,
-	0x70f980f9,
-	0xe0fcd0fc,
-	0xf04021f4,
+	0x0267f004,
+	0xf90576fd,
+	0xfc70f980,
+	0xf4e0fcd0,
+	0x67f04021,
+	0xe007f104,
+	0x0604b607,
+	0xbd0006d0,
+/* 0x0581: memx_func_enter_wait */
+	0xc067f104,
+	0x0664b607,
+	0xf00066cf,
+	0x0bf40464,
+	0x2c67f0f3,
+	0xcf0664b6,
+	0x06800066,
+/* 0x059f: memx_func_leave */
+	0xf000f8f1,
+	0x64b62c67,
+	0x0066cf06,
+	0xf0f20680,
 	0x07f10467,
-	0x04b607e0,
+	0x04b607e4,
 	0x0006d006,
-/* 0x0582: memx_func_enter_wait */
+/* 0x05ba: memx_func_leave_wait */
 	0x67f104bd,
 	0x64b607c0,
 	0x0066cf06,
 	0xf40464f0,
-	0x67f0f30b,
-	0x0664b62c,
-	0x800066cf,
-	0x00f8f106,
-/* 0x05a0: memx_func_leave */
-	0xb62c67f0,
-	0x66cf0664,
-	0xf2068000,
-	0xf10467f0,
-	0xb607e407,
-	0x06d00604,
-/* 0x05bb: memx_func_leave_wait */
-	0xf104bd00,
-	0xb607c067,
-	0x66cf0664,
-	0x0464f000,
-	0xf1f31bf4,
-	0xb9161087,
-	0x21f4028e,
-	0x02d7b904,
-	0xffcc67f1,
-	0xffff63f1,
-	0xf90476fd,
-	0xfc70f980,
-	0xf4e0fcd0,
-	0x00f84021,
-/* 0x05f0: memx_func_wait_vblank */
-	0xb0001698,
-	0x0bf40066,
-	0x0166b013,
-	0xf4060bf4,
-/* 0x0602: memx_func_wait_vblank_head1 */
-	0x77f12e0e,
-	0x0ef40020,
-/* 0x0609: memx_func_wait_vblank_head0 */
-	0x0877f107,
-/* 0x060d: memx_func_wait_vblank_0 */
-	0xc467f100,
-	0x0664b607,
-	0xfd0066cf,
-	0x1bf40467,
-/* 0x061d: memx_func_wait_vblank_1 */
-	0xc467f1f3,
-	0x0664b607,
-	0xfd0066cf,
-	0x0bf40467,
-/* 0x062d: memx_func_wait_vblank_fini */
-	0x0410b6f3,
-/* 0x0632: memx_func_wr32 */
-	0x169800f8,
-	0x01159800,
-	0xf90810b6,
-	0xfc50f960,
-	0xf4e0fcd0,
-	0x42b64021,
-	0xe91bf402,
-/* 0x064e: memx_func_wait */
-	0x87f000f8,
-	0x0684b62c,
-	0x980088cf,
-	0x1d98001e,
-	0x021c9801,
-	0xb6031b98,
-	0x21f41010,
-/* 0x066b: memx_func_delay */
-	0x9800f8a3,
-	0x10b6001e,
-	0x7e21f404,
-/* 0x0676: memx_func_train */
-	0x57f100f8,
-	0x77f10003,
-	0x97f10000,
-	0x93f00000,
-	0x029eb970,
-	0xb90421f4,
-	0xe7f102d8,
-	0x21f42710,
-/* 0x0695: memx_func_train_loop_outer */
-	0x0158e07e,
-	0x0083f101,
-	0xe097f102,
-	0x1193f011,
-	0x80f990f9,
+	0x87f1f31b,
+	0x8eb91610,
+	0x0421f402,
+	0xf102d7b9,
+	0xf1ffcc67,
+	0xfdffff63,
+	0x80f90476,
+	0xd0fc70f9,
+	0x21f4e0fc,
+/* 0x05ef: memx_func_wait_vblank */
+	0x9800f840,
+	0x66b00016,
+	0x120bf400,
+	0xf40166b0,
+	0x0ef4060b,
+/* 0x0601: memx_func_wait_vblank_head1 */
+	0x2077f02c,
+/* 0x0607: memx_func_wait_vblank_head0 */
+	0xf0060ef4,
+/* 0x060a: memx_func_wait_vblank_0 */
+	0x67f10877,
+	0x64b607c4,
+	0x0066cf06,
+	0xf40467fd,
+/* 0x061a: memx_func_wait_vblank_1 */
+	0x67f1f31b,
+	0x64b607c4,
+	0x0066cf06,
+	0xf40467fd,
+/* 0x062a: memx_func_wait_vblank_fini */
+	0x10b6f30b,
+/* 0x062f: memx_func_wr32 */
+	0x9800f804,
+	0x15980016,
+	0x0810b601,
+	0x50f960f9,
 	0xe0fcd0fc,
-	0xf94021f4,
-	0x0067f150,
-/* 0x06b5: memx_func_train_loop_inner */
-	0x1187f100,
-	0x9068ff11,
-	0xfd109894,
-	0x97f10589,
-	0x93f00720,
-	0xf990f910,
-	0xfcd0fc80,
-	0x4021f4e0,
-	0x008097f1,
-	0xb91093f0,
-	0x21f4029e,
-	0x02d8b904,
-	0xf92088c5,
+	0xb64021f4,
+	0x1bf40242,
+/* 0x064b: memx_func_wait */
+	0xf000f8e9,
+	0x84b62c87,
+	0x0088cf06,
+	0x98001e98,
+	0x1c98011d,
+	0x031b9802,
+	0xf41010b6,
+	0x00f8a321,
+/* 0x0668: memx_func_delay */
+	0xb6001e98,
+	0x21f40410,
+/* 0x0673: memx_func_train */
+	0xf000f87e,
+	0x77f00357,
+	0x0097f100,
+	0x7093f000,
+	0xf4029eb9,
+	0xd8b90421,
+	0x10e7f102,
+	0x7e21f427,
+/* 0x0690: memx_func_train_loop_outer */
+	0x010158e0,
+	0x020083f1,
+	0x11e097f1,
+	0xf91193f0,
+	0xfc80f990,
+	0xf4e0fcd0,
+	0x50f94021,
+/* 0x06af: memx_func_train_loop_inner */
+	0xf10067f0,
+	0xff111187,
+	0x98949068,
+	0x0589fd10,
+	0x072097f1,
+	0xf91093f0,
 	0xfc80f990,
 	0xf4e0fcd0,
 	0x97f14021,
-	0x93f0053c,
-	0x0287f110,
-	0x0083f130,
-	0xf990f980,
+	0x93f00080,
+	0x029eb910,
+	0xb90421f4,
+	0x88c502d8,
+	0xf990f920,
 	0xfcd0fc80,
 	0x4021f4e0,
-	0x0560e7f1,
-	0xf110e3f0,
-	0xf10000d7,
-	0x908000d3,
-	0xb7f100dc,
-	0xb3f08480,
-	0xa321f41e,
-	0x000057f1,
-	0xffff97f1,
-	0x830093f1,
-/* 0x0734: memx_func_train_loop_4x */
-	0x0080a7f1,
-	0xb910a3f0,
-	0x21f402ae,
-	0x02d8b904,
-	0xffdfb7f1,
-	0xffffb3f1,
-	0xf9048bfd,
-	0xfc80f9a0,
+	0x053c97f1,
+	0xf11093f0,
+	0xf1300287,
+	0xf9800083,
+	0xfc80f990,
 	0xf4e0fcd0,
-	0xa7f14021,
-	0xa3f0053c,
-	0x0287f110,
-	0x0083f130,
-	0xf9a0f980,
-	0xfcd0fc80,
-	0x4021f4e0,
-	0x0560e7f1,
-	0xf110e3f0,
-	0xf10000d7,
-	0xb98000d3,
-	0xb7f102dc,
-	0xb3f02710,
-	0xa321f400,
-	0xf402eeb9,
-	0xddb90421,
-	0x949dff02,
+	0xe7f14021,
+	0xe3f00560,
+	0x00d7f110,
+	0x00d3f100,
+	0x00dc9080,
+	0x8480b7f1,
+	0xf41eb3f0,
+	0x57f0a321,
+	0xff97f100,
+	0x0093f1ff,
+/* 0x072d: memx_func_train_loop_4x */
+	0x80a7f183,
+	0x10a3f000,
+	0xf402aeb9,
+	0xd8b90421,
+	0xdfb7f102,
+	0xffb3f1ff,
+	0x048bfdff,
+	0x80f9a0f9,
+	0xe0fcd0fc,
+	0xf14021f4,
+	0xf0053ca7,
+	0x87f110a3,
+	0x83f13002,
+	0xa0f98000,
+	0xd0fc80f9,
+	0x21f4e0fc,
+	0x60e7f140,
+	0x10e3f005,
+	0x0000d7f1,
+	0x8000d3f1,
+	0xf102dcb9,
+	0xf02710b7,
+	0x21f400b3,
+	0x02eeb9a3,
+	0xb90421f4,
+	0x9dff02dd,
+	0x0150b694,
+	0xf4045670,
+	0x7aa0921e,
+	0xa9800bcc,
+	0x0160b600,
+	0x700470b6,
+	0x1ef51066,
+	0x50fcff01,
 	0x700150b6,
-	0x1ef40456,
-	0xcc7aa092,
-	0x00a9800b,
-	0xb60160b6,
-	0x66700470,
-	0x001ef510,
-	0xb650fcff,
-	0x56700150,
-	0xd41ef507,
-/* 0x07c7: memx_exec */
-	0xf900f8fe,
-	0xb9d0f9e0,
-	0xb2b902c1,
-/* 0x07d1: memx_exec_next */
-	0x00139802,
-	0xe70410b6,
-	0xe701f034,
-	0xb601e033,
-	0x30f00132,
-	0xde35980c,
-	0x12b855f9,
-	0xe41ef406,
-	0x98f10b98,
-	0xcbbbf20c,
-	0xc4b7f102,
-	0x06b4b607,
-	0xfc00bbcf,
-	0xf5e0fcd0,
+	0x1ef50756,
+	0x00f8fed6,
+/* 0x07c0: memx_exec */
+	0xd0f9e0f9,
+	0xb902c1b9,
+/* 0x07ca: memx_exec_next */
+	0x139802b2,
+	0x0410b600,
+	0x01f034e7,
+	0x01e033e7,
+	0xf00132b6,
+	0x35980c30,
+	0xb855f9de,
+	0x1ef40612,
+	0xf10b98e4,
+	0xbbf20c98,
+	0xb7f102cb,
+	0xb4b607c4,
+	0x00bbcf06,
+	0xe0fcd0fc,
+	0x033621f5,
+/* 0x0806: memx_info */
+	0xc67000f8,
+	0x0e0bf401,
+/* 0x080c: memx_info_data */
+	0x03ccc7f1,
+	0x0800b7f1,
+/* 0x0817: memx_info_train */
+	0xf10b0ef4,
+	0xf10bccc7,
+/* 0x081f: memx_info_send */
+	0xf50100b7,
 	0xf8033621,
-/* 0x080d: memx_info */
-	0x01c67000,
-/* 0x0813: memx_info_data */
-	0xf10e0bf4,
-	0xf103ccc7,
-	0xf40800b7,
-/* 0x081e: memx_info_train */
-	0xc7f10b0e,
-	0xb7f10bcc,
-/* 0x0826: memx_info_send */
-	0x21f50100,
-	0x00f80336,
-/* 0x082c: memx_recv */
-	0xf401d6b0,
-	0xd6b0980b,
-	0xd80bf400,
-/* 0x083a: memx_init */
-	0x00f800f8,
-/* 0x083c: perf_recv */
-/* 0x083e: perf_init */
-	0x00f800f8,
-/* 0x0840: i2c_drive_scl */
-	0xf40036b0,
-	0x07f1110b,
-	0x04b607e0,
-	0x0001d006,
-	0x00f804bd,
-/* 0x0854: i2c_drive_scl_lo */
-	0x07e407f1,
-	0xd00604b6,
-	0x04bd0001,
-/* 0x0862: i2c_drive_sda */
-	0x36b000f8,
-	0x110bf400,
-	0x07e007f1,
-	0xd00604b6,
-	0x04bd0002,
-/* 0x0876: i2c_drive_sda_lo */
-	0x07f100f8,
-	0x04b607e4,
-	0x0002d006,
-	0x00f804bd,
-/* 0x0884: i2c_sense_scl */
-	0xf10132f4,
-	0xb607c437,
-	0x33cf0634,
-	0x0431fd00,
-	0xf4060bf4,
-/* 0x089a: i2c_sense_scl_done */
-	0x00f80131,
-/* 0x089c: i2c_sense_sda */
-	0xf10132f4,
-	0xb607c437,
-	0x33cf0634,
-	0x0432fd00,
-	0xf4060bf4,
-/* 0x08b2: i2c_sense_sda_done */
-	0x00f80131,
-/* 0x08b4: i2c_raise_scl */
-	0x47f140f9,
-	0x37f00898,
-	0x4021f501,
-/* 0x08c1: i2c_raise_scl_wait */
+/* 0x0825: memx_recv */
+	0x01d6b000,
+	0xb0980bf4,
+	0x0bf400d6,
+/* 0x0833: memx_init */
+	0xf800f8d8,
+/* 0x0835: perf_recv */
+/* 0x0837: perf_init */
+	0xf800f800,
+/* 0x0839: i2c_drive_scl */
+	0x0036b000,
+	0xf1110bf4,
+	0xb607e007,
+	0x01d00604,
+	0xf804bd00,
+/* 0x084d: i2c_drive_scl_lo */
+	0xe407f100,
+	0x0604b607,
+	0xbd0001d0,
+/* 0x085b: i2c_drive_sda */
+	0xb000f804,
+	0x0bf40036,
+	0xe007f111,
+	0x0604b607,
+	0xbd0002d0,
+/* 0x086f: i2c_drive_sda_lo */
+	0xf100f804,
+	0xb607e407,
+	0x02d00604,
+	0xf804bd00,
+/* 0x087d: i2c_sense_scl */
+	0x0132f400,
+	0x07c437f1,
+	0xcf0634b6,
+	0x31fd0033,
+	0x060bf404,
+/* 0x0893: i2c_sense_scl_done */
+	0xf80131f4,
+/* 0x0895: i2c_sense_sda */
+	0x0132f400,
+	0x07c437f1,
+	0xcf0634b6,
+	0x32fd0033,
+	0x060bf404,
+/* 0x08ab: i2c_sense_sda_done */
+	0xf80131f4,
+/* 0x08ad: i2c_raise_scl */
+	0xf140f900,
+	0xf0089847,
+	0x21f50137,
+/* 0x08ba: i2c_raise_scl_wait */
+	0xe7f10839,
+	0x21f403e8,
+	0x7d21f57e,
+	0x0901f408,
+	0xf40142b6,
+/* 0x08ce: i2c_raise_scl_done */
+	0x40fcef1b,
+/* 0x08d2: i2c_start */
+	0x21f500f8,
+	0x11f4087d,
+	0x9521f50d,
+	0x0611f408,
+/* 0x08e3: i2c_start_rep */
+	0xf0300ef4,
+	0x21f50037,
+	0x37f00839,
+	0x5b21f501,
+	0x0076bb08,
+	0xf90465b6,
+	0x04659450,
+	0xbd0256bb,
+	0x0475fd50,
+	0x21f550fc,
+	0x64b608ad,
+	0x1f11f404,
+/* 0x0910: i2c_start_send */
+	0xf50037f0,
+	0xf1085b21,
+	0xf41388e7,
+	0x37f07e21,
+	0x3921f500,
+	0x88e7f108,
+	0x7e21f413,
+/* 0x092c: i2c_start_out */
+/* 0x092e: i2c_stop */
+	0x37f000f8,
+	0x3921f500,
+	0x0037f008,
+	0x085b21f5,
+	0x03e8e7f1,
+	0xf07e21f4,
+	0x21f50137,
+	0xe7f10839,
+	0x21f41388,
+	0x0137f07e,
+	0x085b21f5,
+	0x1388e7f1,
+	0xf87e21f4,
+/* 0x0961: i2c_bitw */
+	0x5b21f500,
 	0xe8e7f108,
 	0x7e21f403,
-	0x088421f5,
-	0xb60901f4,
-	0x1bf40142,
-/* 0x08d5: i2c_raise_scl_done */
-	0xf840fcef,
-/* 0x08d9: i2c_start */
-	0x8421f500,
-	0x0d11f408,
-	0x089c21f5,
-	0xf40611f4,
-/* 0x08ea: i2c_start_rep */
-	0x37f0300e,
-	0x4021f500,
-	0x0137f008,
-	0x086221f5,
 	0xb60076bb,
 	0x50f90465,
 	0xbb046594,
 	0x50bd0256,
 	0xfc0475fd,
-	0xb421f550,
+	0xad21f550,
 	0x0464b608,
-/* 0x0917: i2c_start_send */
-	0xf01f11f4,
-	0x21f50037,
-	0xe7f10862,
-	0x21f41388,
-	0x0037f07e,
-	0x084021f5,
-	0x1388e7f1,
-/* 0x0933: i2c_start_out */
-	0xf87e21f4,
-/* 0x0935: i2c_stop */
-	0x0037f000,
-	0x084021f5,
-	0xf50037f0,
-	0xf1086221,
-	0xf403e8e7,
+	0xf11811f4,
+	0xf41388e7,
 	0x37f07e21,
-	0x4021f501,
+	0x3921f500,
 	0x88e7f108,
 	0x7e21f413,
-	0xf50137f0,
-	0xf1086221,
-	0xf41388e7,
-	0x00f87e21,
-/* 0x0968: i2c_bitw */
-	0x086221f5,
-	0x03e8e7f1,
-	0xbb7e21f4,
-	0x65b60076,
-	0x9450f904,
-	0x56bb0465,
-	0xfd50bd02,
-	0x50fc0475,
-	0x08b421f5,
-	0xf40464b6,
-	0xe7f11811,
+/* 0x09a0: i2c_bitw_out */
+/* 0x09a2: i2c_bitr */
+	0x37f000f8,
+	0x5b21f501,
+	0xe8e7f108,
+	0x7e21f403,
+	0xb60076bb,
+	0x50f90465,
+	0xbb046594,
+	0x50bd0256,
+	0xfc0475fd,
+	0xad21f550,
+	0x0464b608,
+	0xf51b11f4,
+	0xf0089521,
+	0x21f50037,
+	0xe7f10839,
 	0x21f41388,
-	0x0037f07e,
-	0x084021f5,
-	0x1388e7f1,
-/* 0x09a7: i2c_bitw_out */
-	0xf87e21f4,
-/* 0x09a9: i2c_bitr */
-	0x0137f000,
-	0x086221f5,
-	0x03e8e7f1,
-	0xbb7e21f4,
-	0x65b60076,
-	0x9450f904,
-	0x56bb0465,
-	0xfd50bd02,
-	0x50fc0475,
-	0x08b421f5,
-	0xf40464b6,
-	0x21f51b11,
-	0x37f0089c,
-	0x4021f500,
-	0x88e7f108,
-	0x7e21f413,
-	0xf4013cf0,
-/* 0x09ee: i2c_bitr_done */
-	0x00f80131,
-/* 0x09f0: i2c_get_byte */
-	0xf00057f0,
-/* 0x09f6: i2c_get_byte_next */
-	0x54b60847,
+	0x013cf07e,
+/* 0x09e7: i2c_bitr_done */
+	0xf80131f4,
+/* 0x09e9: i2c_get_byte */
+	0x0057f000,
+/* 0x09ef: i2c_get_byte_next */
+	0xb60847f0,
+	0x76bb0154,
+	0x0465b600,
+	0x659450f9,
+	0x0256bb04,
+	0x75fd50bd,
+	0xf550fc04,
+	0xb609a221,
+	0x11f40464,
+	0x0553fd2b,
+	0xf40142b6,
+	0x37f0d81b,
 	0x0076bb01,
 	0xf90465b6,
 	0x04659450,
 	0xbd0256bb,
 	0x0475fd50,
 	0x21f550fc,
-	0x64b609a9,
-	0x2b11f404,
-	0xb60553fd,
-	0x1bf40142,
-	0x0137f0d8,
-	0xb60076bb,
-	0x50f90465,
-	0xbb046594,
-	0x50bd0256,
-	0xfc0475fd,
-	0x6821f550,
-	0x0464b609,
-/* 0x0a40: i2c_get_byte_done */
-/* 0x0a42: i2c_put_byte */
-	0x47f000f8,
-/* 0x0a45: i2c_put_byte_next */
-	0x0142b608,
-	0xbb3854ff,
-	0x65b60076,
-	0x9450f904,
-	0x56bb0465,
-	0xfd50bd02,
-	0x50fc0475,
-	0x096821f5,
-	0xf40464b6,
-	0x46b03411,
-	0xd81bf400,
+	0x64b60961,
+/* 0x0a39: i2c_get_byte_done */
+/* 0x0a3b: i2c_put_byte */
+	0xf000f804,
+/* 0x0a3e: i2c_put_byte_next */
+	0x42b60847,
+	0x3854ff01,
 	0xb60076bb,
 	0x50f90465,
 	0xbb046594,
 	0x50bd0256,
 	0xfc0475fd,
-	0xa921f550,
+	0x6121f550,
 	0x0464b609,
-	0xbb0f11f4,
-	0x36b00076,
-	0x061bf401,
-/* 0x0a9b: i2c_put_byte_done */
-	0xf80132f4,
-/* 0x0a9d: i2c_addr */
-	0x0076bb00,
+	0xb03411f4,
+	0x1bf40046,
+	0x0076bbd8,
 	0xf90465b6,
 	0x04659450,
 	0xbd0256bb,
 	0x0475fd50,
 	0x21f550fc,
-	0x64b608d9,
-	0x2911f404,
-	0x012ec3e7,
-	0xfd0134b6,
-	0x76bb0553,
+	0x64b609a2,
+	0x0f11f404,
+	0xb00076bb,
+	0x1bf40136,
+	0x0132f406,
+/* 0x0a94: i2c_put_byte_done */
+/* 0x0a96: i2c_addr */
+	0x76bb00f8,
 	0x0465b600,
 	0x659450f9,
 	0x0256bb04,
 	0x75fd50bd,
 	0xf550fc04,
-	0xb60a4221,
-/* 0x0ae2: i2c_addr_done */
-	0x00f80464,
-/* 0x0ae4: i2c_acquire_addr */
-	0xb6f8cec7,
-	0xe0b702e4,
-	0xee980d1c,
-/* 0x0af3: i2c_acquire */
-	0xf500f800,
-	0xf40ae421,
-	0xd9f00421,
-	0x4021f403,
-/* 0x0b02: i2c_release */
-	0x21f500f8,
-	0x21f40ae4,
-	0x03daf004,
-	0xf84021f4,
-/* 0x0b11: i2c_recv */
-	0x0132f400,
-	0xb6f8c1c7,
-	0x16b00214,
-	0x3a1ff528,
-	0xf413a001,
-	0x0032980c,
-	0x0ccc13a0,
-	0xf4003198,
-	0xd0f90231,
-	0xd0f9e0f9,
-	0x000067f1,
-	0x100063f1,
-	0xbb016792,
+	0xb608d221,
+	0x11f40464,
+	0x2ec3e729,
+	0x0134b601,
+	0xbb0553fd,
 	0x65b60076,
 	0x9450f904,
 	0x56bb0465,
 	0xfd50bd02,
 	0x50fc0475,
-	0x0af321f5,
-	0xfc0464b6,
-	0x00d6b0d0,
-	0x00b31bf5,
-	0xbb0057f0,
+	0x0a3b21f5,
+/* 0x0adb: i2c_addr_done */
+	0xf80464b6,
+/* 0x0add: i2c_acquire_addr */
+	0xf8cec700,
+	0xb702e4b6,
+	0x980d1ce0,
+	0x00f800ee,
+/* 0x0aec: i2c_acquire */
+	0x0add21f5,
+	0xf00421f4,
+	0x21f403d9,
+/* 0x0afb: i2c_release */
+	0xf500f840,
+	0xf40add21,
+	0xdaf00421,
+	0x4021f403,
+/* 0x0b0a: i2c_recv */
+	0x32f400f8,
+	0xf8c1c701,
+	0xb00214b6,
+	0x1ff52816,
+	0x13a0013a,
+	0x32980cf4,
+	0xcc13a000,
+	0x0031980c,
+	0xf90231f4,
+	0xf9e0f9d0,
+	0x0067f1d0,
+	0x0063f100,
+	0x01679210,
+	0xb60076bb,
+	0x50f90465,
+	0xbb046594,
+	0x50bd0256,
+	0xfc0475fd,
+	0xec21f550,
+	0x0464b60a,
+	0xd6b0d0fc,
+	0xb31bf500,
+	0x0057f000,
+	0xb60076bb,
+	0x50f90465,
+	0xbb046594,
+	0x50bd0256,
+	0xfc0475fd,
+	0x9621f550,
+	0x0464b60a,
+	0x00d011f5,
+	0xbbe0c5c7,
 	0x65b60076,
 	0x9450f904,
 	0x56bb0465,
 	0xfd50bd02,
 	0x50fc0475,
-	0x0a9d21f5,
+	0x0a3b21f5,
 	0xf50464b6,
-	0xc700d011,
-	0x76bbe0c5,
+	0xf000ad11,
+	0x76bb0157,
 	0x0465b600,
 	0x659450f9,
 	0x0256bb04,
 	0x75fd50bd,
 	0xf550fc04,
-	0xb60a4221,
+	0xb60a9621,
 	0x11f50464,
-	0x57f000ad,
-	0x0076bb01,
-	0xf90465b6,
-	0x04659450,
-	0xbd0256bb,
-	0x0475fd50,
-	0x21f550fc,
-	0x64b60a9d,
-	0x8a11f504,
-	0x0076bb00,
-	0xf90465b6,
-	0x04659450,
-	0xbd0256bb,
-	0x0475fd50,
-	0x21f550fc,
-	0x64b609f0,
-	0x6a11f404,
-	0xbbe05bcb,
-	0x65b60076,
-	0x9450f904,
-	0x56bb0465,
-	0xfd50bd02,
-	0x50fc0475,
-	0x093521f5,
-	0xb90464b6,
-	0x74bd025b,
-/* 0x0c17: i2c_recv_not_rd08 */
-	0xb0430ef4,
-	0x1bf401d6,
-	0x0057f03d,
-	0x0a9d21f5,
-	0xc73311f4,
-	0x21f5e0c5,
-	0x11f40a42,
-	0x0057f029,
-	0x0a9d21f5,
-	0xc71f11f4,
-	0x21f5e0b5,
-	0x11f40a42,
-	0x3521f515,
-	0xc774bd09,
-	0x1bf408c5,
-	0x0232f409,
-/* 0x0c57: i2c_recv_not_wr08 */
-/* 0x0c57: i2c_recv_done */
-	0xc7030ef4,
-	0x21f5f8ce,
-	0xe0fc0b02,
-	0x12f4d0fc,
-	0x027cb90a,
-	0x033621f5,
-/* 0x0c6c: i2c_recv_exit */
-/* 0x0c6e: i2c_init */
+	0x76bb008a,
+	0x0465b600,
+	0x659450f9,
+	0x0256bb04,
+	0x75fd50bd,
+	0xf550fc04,
+	0xb609e921,
+	0x11f40464,
+	0xe05bcb6a,
+	0xb60076bb,
+	0x50f90465,
+	0xbb046594,
+	0x50bd0256,
+	0xfc0475fd,
+	0x2e21f550,
+	0x0464b609,
+	0xbd025bb9,
+	0x430ef474,
+/* 0x0c10: i2c_recv_not_rd08 */
+	0xf401d6b0,
+	0x57f03d1b,
+	0x9621f500,
+	0x3311f40a,
+	0xf5e0c5c7,
+	0xf40a3b21,
+	0x57f02911,
+	0x9621f500,
+	0x1f11f40a,
+	0xf5e0b5c7,
+	0xf40a3b21,
+	0x21f51511,
+	0x74bd092e,
+	0xf408c5c7,
+	0x32f4091b,
+	0x030ef402,
+/* 0x0c50: i2c_recv_not_wr08 */
+/* 0x0c50: i2c_recv_done */
+	0xf5f8cec7,
+	0xfc0afb21,
+	0xf4d0fce0,
+	0x7cb90a12,
+	0x3621f502,
+/* 0x0c65: i2c_recv_exit */
+/* 0x0c67: i2c_init */
+	0xf800f803,
+/* 0x0c69: test_recv */
+	0xd817f100,
+	0x0614b605,
+	0xb60011cf,
+	0x07f10110,
+	0x04b605d8,
+	0x0001d006,
+	0xe7f104bd,
+	0xe3f1d900,
+	0x21f5134f,
+	0x00f80256,
+/* 0x0c90: test_init */
+	0x0800e7f1,
+	0x025621f5,
+/* 0x0c9a: idle_recv */
 	0x00f800f8,
-/* 0x0c70: test_recv */
-	0x05d817f1,
-	0xcf0614b6,
-	0x10b60011,
-	0xd807f101,
-	0x0604b605,
-	0xbd0001d0,
-	0x00e7f104,
-	0x4fe3f1d9,
-	0x5621f513,
-/* 0x0c97: test_init */
-	0xf100f802,
-	0xf50800e7,
-	0xf8025621,
-/* 0x0ca1: idle_recv */
-/* 0x0ca3: idle */
-	0xf400f800,
-	0x17f10031,
-	0x14b605d4,
-	0x0011cf06,
-	0xf10110b6,
-	0xb605d407,
-	0x01d00604,
-/* 0x0cbf: idle_loop */
-	0xf004bd00,
-	0x32f45817,
-/* 0x0cc5: idle_proc */
-/* 0x0cc5: idle_proc_exec */
-	0xb910f902,
-	0x21f5021e,
-	0x10fc033f,
-	0xf40911f4,
-	0x0ef40231,
-/* 0x0cd9: idle_proc_next */
-	0x5810b6ef,
-	0xf4061fb8,
-	0x02f4e61b,
-	0x0028f4dd,
-	0x00bb0ef4,
+/* 0x0c9c: idle */
+	0xf10031f4,
+	0xb605d417,
+	0x11cf0614,
+	0x0110b600,
+	0x05d407f1,
+	0xd00604b6,
+	0x04bd0001,
+/* 0x0cb8: idle_loop */
+	0xf45817f0,
+/* 0x0cbe: idle_proc */
+/* 0x0cbe: idle_proc_exec */
+	0x10f90232,
+	0xf5021eb9,
+	0xfc033f21,
+	0x0911f410,
+	0xf40231f4,
+/* 0x0cd2: idle_proc_next */
+	0x10b6ef0e,
+	0x061fb858,
+	0xf4e61bf4,
+	0x28f4dd02,
+	0xbb0ef400,
+	0x00000000,
+	0x00000000,
 	0x00000000,
 	0x00000000,
 	0x00000000,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/memx.fuc b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/memx.fuc
index ec03f9a4290b..1663bf943d77 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/memx.fuc
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/fuc/memx.fuc
@@ -82,15 +82,15 @@ memx_train_tail:
 // $r0  - zero
 memx_func_enter:
 #if NVKM_PPWR_CHIPSET == GT215
-	movw $r8 0x1610
+	mov $r8 0x1610
 	nv_rd32($r7, $r8)
 	imm32($r6, 0xfffffffc)
 	and $r7 $r6
-	movw $r6 0x2
+	mov $r6 0x2
 	or $r7 $r6
 	nv_wr32($r8, $r7)
 #else
-	movw $r6 0x001620
+	mov $r6 0x001620
 	imm32($r7, ~0x00000aa2);
 	nv_rd32($r8, $r6)
 	and $r8 $r7
@@ -101,7 +101,7 @@ memx_func_enter:
 	and $r8 $r7
 	nv_wr32($r6, $r8)
 
-	movw $r6 0x0026f0
+	mov $r6 0x0026f0
 	nv_rd32($r8, $r6)
 	and $r8 $r7
 	nv_wr32($r6, $r8)
@@ -136,19 +136,19 @@ memx_func_leave:
 		bra nz #memx_func_leave_wait
 
 #if NVKM_PPWR_CHIPSET == GT215
-	movw $r8 0x1610
+	mov $r8 0x1610
 	nv_rd32($r7, $r8)
 	imm32($r6, 0xffffffcc)
 	and $r7 $r6
 	nv_wr32($r8, $r7)
 #else
-	movw $r6 0x0026f0
+	mov $r6 0x0026f0
 	imm32($r7, 0x00000001)
 	nv_rd32($r8, $r6)
 	or $r8 $r7
 	nv_wr32($r6, $r8)
 
-	movw $r6 0x001620
+	mov $r6 0x001620
 	nv_rd32($r8, $r6)
 	or $r8 $r7
 	nv_wr32($r6, $r8)
@@ -177,11 +177,11 @@ memx_func_wait_vblank:
 	bra #memx_func_wait_vblank_fini
 
 	memx_func_wait_vblank_head1:
-	movw $r7 0x20
+	mov $r7 0x20
 	bra #memx_func_wait_vblank_0
 
 	memx_func_wait_vblank_head0:
-	movw $r7 0x8
+	mov $r7 0x8
 
 	memx_func_wait_vblank_0:
 		nv_iord($r6, NV_PPWR_INPUT)
@@ -273,13 +273,13 @@ memx_func_train:
 // $r5 - outer loop counter
 // $r6 - inner loop counter
 // $r7 - entry counter (#memx_train_head + $r7)
-	movw $r5 0x3
-	movw $r7 0x0
+	mov $r5 0x3
+	mov $r7 0x0
 
 // Read random memory to wake up... things
 	imm32($r9, 0x700000)
 	nv_rd32($r8,$r9)
-	movw $r14 0x2710
+	mov $r14 0x2710
 	call(nsec)
 
 	memx_func_train_loop_outer:
@@ -289,9 +289,9 @@ memx_func_train:
 		nv_wr32($r9, $r8)
 		push $r5
 
-		movw $r6 0x0
+		mov $r6 0x0
 		memx_func_train_loop_inner:
-			movw $r8 0x1111
+			mov $r8 0x1111
 			mulu $r9 $r6 $r8
 			shl b32 $r8 $r9 0x10
 			or $r8 $r9
@@ -315,7 +315,7 @@ memx_func_train:
 
 			// $r5 - inner inner loop counter
 			// $r9 - result
-			movw $r5 0
+			mov $r5 0
 			imm32($r9, 0x8300ffff)
 			memx_func_train_loop_4x:
 				imm32($r10, 0x100080)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 136/189] s390/eadm: fix CONFIG_BLOCK include dependency

[Sasha Levin]

From: Sebastian Ott <sebott@linux.vnet.ibm.com>

[ Upstream commit 366b77ae43c5a3bf1a367f15ec8bc16e05035f14 ]

Commit 2a842acab109 ("block: introduce new block status code type")
added blk_status_t usage to the eadm subchannel driver. However
blk_status_t is unknown when included via <linux/blkdev.h> for CONFIG_BLOCK=n.

Only include <linux/blk_types.h> since this is the only dependency eadm has.

This fixes build failures like below:
In file included from drivers/s390/cio/eadm_sch.c:24:0:
./arch/s390/include/asm/eadm.h:111:4: error: unknown type name 'blk_status_t'; did you mean 'si_status'?
    blk_status_t error);

Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/s390/include/asm/eadm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/include/asm/eadm.h b/arch/s390/include/asm/eadm.h
index eb5323161f11..bb63b2afdf6f 100644
--- a/arch/s390/include/asm/eadm.h
+++ b/arch/s390/include/asm/eadm.h
@@ -4,7 +4,7 @@
 
 #include <linux/types.h>
 #include <linux/device.h>
-#include <linux/blkdev.h>
+#include <linux/blk_types.h>
 
 struct arqb {
 	u64 data;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 137/189] netfilter: x_tables: make allocation less aggressive

[Sasha Levin]

From: Michal Hocko <mhocko@kernel.org>

[ Upstream commit 0537250fdc6c876ed4cbbe874c739aebef493ee2 ]

syzbot has noticed that xt_alloc_table_info can allocate a lot of memory.
This is an admin only interface but an admin in a namespace is sufficient
as well.  eacd86ca3b03 ("net/netfilter/x_tables.c: use kvmalloc() in
xt_alloc_table_info()") has changed the opencoded kmalloc->vmalloc
fallback into kvmalloc.  It has dropped __GFP_NORETRY on the way because
vmalloc has simply never fully supported __GFP_NORETRY semantic.  This is
still the case because e.g.  page tables backing the vmalloc area are
hardcoded GFP_KERNEL.

Revert back to __GFP_NORETRY as a poors man defence against excessively
large allocation request here.  We will not rule out the OOM killer
completely but __GFP_NORETRY should at least stop the large request in
most cases.

[akpm@linux-foundation.org: coding-style fixes]
Fixes: eacd86ca3b03 ("net/netfilter/x_tables.c: use kvmalloc() in xt_alloc_tableLink: http://lkml.kernel.org/r/20180130140104.GE21609@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/netfilter/x_tables.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index d7070d18db20..d4442aa8fd54 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -1008,7 +1008,12 @@ struct xt_table_info *xt_alloc_table_info(unsigned int size)
 	if ((size >> PAGE_SHIFT) + 2 > totalram_pages)
 		return NULL;
 
-	info = kvmalloc(sz, GFP_KERNEL);
+	/* __GFP_NORETRY is not fully supported by kvmalloc but it should
+	 * work reasonably well if sz is too large and bail out rather
+	 * than shoot all processes down before realizing there is nothing
+	 * more to reclaim.
+	 */
+	info = kvmalloc(sz, GFP_KERNEL | __GFP_NORETRY);
 	if (!info)
 		return NULL;
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 138/189] netfilter: ipv6: nf_defrag: Kill frag queue on RFC2460 failure

[Sasha Levin]

From: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>

[ Upstream commit ea23d5e3bf340e413b8e05c13da233c99c64142b ]

Failures were seen in ICMPv6 fragmentation timeout tests if they were
run after the RFC2460 failure tests. Kernel was not sending out the
ICMPv6 fragment reassembly time exceeded packet after the fragmentation
reassembly timeout of 1 minute had elapsed.

This happened because the frag queue was not released if an error in
IPv6 fragmentation header was detected by RFC2460.

Fixes: 83f1999caeb1 ("netfilter: ipv6: nf_defrag: Pass on packets to stack per RFC2460")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/ipv6/netfilter/nf_conntrack_reasm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index ce53dcfda88a..b84ce3e6d728 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -264,6 +264,7 @@ static int nf_ct_frag6_queue(struct frag_queue *fq, struct sk_buff *skb,
 			 * this case. -DaveM
 			 */
 			pr_debug("end of fragment not rounded to 8 bytes.\n");
+			inet_frag_kill(&fq->q, &nf_frags);
 			return -EPROTO;
 		}
 		if (end > fq->q.len) {
-- 
2.15.1

[PATCH AUTOSEL for 4.15 139/189] btrfs: Ignore errors from btrfs_qgroup_trace_extent_post

[Sasha Levin]

From: Nikolay Borisov <nborisov@suse.com>

[ Upstream commit 952bd3db0dada9994fa7edd891178075abcc045d ]

Running generic/019 with qgroups on the scratch device enabled is almost
guaranteed to trigger the BUG_ON in btrfs_free_tree_block. It's supposed
to trigger only on -ENOMEM, in reality, however, it's possible to get
-EIO from btrfs_qgroup_trace_extent_post. This function just finds the
roots of the extent being tracked and sets the qrecord->old_roots list.
If this operation fails nothing critical happens except the quota
accounting can be considered wrong. In such case just set the
INCONSISTENT flag for the quota and print a warning, rather than killing
off the system. Additionally, it's possible to trigger a BUG_ON in
btrfs_truncate_inode_items as well.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ error message adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/delayed-ref.c | 3 ++-
 fs/btrfs/qgroup.c      | 9 +++++++--
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/delayed-ref.c b/fs/btrfs/delayed-ref.c
index 83be8f9fd906..fa552a5ac103 100644
--- a/fs/btrfs/delayed-ref.c
+++ b/fs/btrfs/delayed-ref.c
@@ -821,7 +821,8 @@ int btrfs_add_delayed_tree_ref(struct btrfs_fs_info *fs_info,
 	spin_unlock(&delayed_refs->lock);
 
 	if (qrecord_inserted)
-		return btrfs_qgroup_trace_extent_post(fs_info, record);
+		btrfs_qgroup_trace_extent_post(fs_info, record);
+
 	return 0;
 
 free_head_ref:
diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index 168fd03ca3ac..388731481e9d 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -1442,8 +1442,13 @@ int btrfs_qgroup_trace_extent_post(struct btrfs_fs_info *fs_info,
 	int ret;
 
 	ret = btrfs_find_all_roots(NULL, fs_info, bytenr, 0, &old_root, false);
-	if (ret < 0)
-		return ret;
+	if (ret < 0) {
+		fs_info->qgroup_flags |= BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT;
+		btrfs_warn(fs_info,
+"error accounting new delayed refs extent (err code: %d), quota inconsistent",
+			ret);
+		return 0;
+	}
 
 	/*
 	 * Here we don't need to get the lock of
-- 
2.15.1

[PATCH AUTOSEL for 4.15 140/189] x86/power: Fix swsusp_arch_resume prototype

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 328008a72d38b5bde6491e463405c34a81a65d3e ]

The declaration for swsusp_arch_resume marks it as 'asmlinkage', but the
definition in x86-32 does not, and it fails to include the header with the
declaration. This leads to a warning when building with
link-time-optimizations:

kernel/power/power.h:108:23: error: type of 'swsusp_arch_resume' does not match original declaration [-Werror=lto-type-mismatch]
 extern asmlinkage int swsusp_arch_resume(void);
                       ^
arch/x86/power/hibernate_32.c:148:0: note: 'swsusp_arch_resume' was previously declared here
 int swsusp_arch_resume(void)

This moves the declaration into a globally visible header file and fixes up
both x86 definitions to match it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Len Brown <len.brown@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Link: https://lkml.kernel.org/r/20180202145634.200291-2-arnd@arndb.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/power/hibernate_32.c | 2 +-
 arch/x86/power/hibernate_64.c | 2 +-
 include/linux/suspend.h       | 2 ++
 kernel/power/power.h          | 3 ---
 4 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/x86/power/hibernate_32.c b/arch/x86/power/hibernate_32.c
index c35fdb585c68..afc4ed7b1578 100644
--- a/arch/x86/power/hibernate_32.c
+++ b/arch/x86/power/hibernate_32.c
@@ -145,7 +145,7 @@ static inline void resume_init_first_level_page_table(pgd_t *pg_dir)
 #endif
 }
 
-int swsusp_arch_resume(void)
+asmlinkage int swsusp_arch_resume(void)
 {
 	int error;
 
diff --git a/arch/x86/power/hibernate_64.c b/arch/x86/power/hibernate_64.c
index f910c514438f..0ef5e5204968 100644
--- a/arch/x86/power/hibernate_64.c
+++ b/arch/x86/power/hibernate_64.c
@@ -174,7 +174,7 @@ out:
 	return 0;
 }
 
-int swsusp_arch_resume(void)
+asmlinkage int swsusp_arch_resume(void)
 {
 	int error;
 
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index d60b0f5c38d5..8544357d92d0 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -384,6 +384,8 @@ extern int swsusp_page_is_forbidden(struct page *);
 extern void swsusp_set_page_free(struct page *);
 extern void swsusp_unset_page_free(struct page *);
 extern unsigned long get_safe_page(gfp_t gfp_mask);
+extern asmlinkage int swsusp_arch_suspend(void);
+extern asmlinkage int swsusp_arch_resume(void);
 
 extern void hibernation_set_ops(const struct platform_hibernation_ops *ops);
 extern int hibernate(void);
diff --git a/kernel/power/power.h b/kernel/power/power.h
index f29cd178df90..9e58bdc8a562 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -104,9 +104,6 @@ extern int in_suspend;
 extern dev_t swsusp_resume_device;
 extern sector_t swsusp_resume_block;
 
-extern asmlinkage int swsusp_arch_suspend(void);
-extern asmlinkage int swsusp_arch_resume(void);
-
 extern int create_basic_memory_bitmaps(void);
 extern void free_basic_memory_bitmaps(void);
 extern int hibernate_preallocate_memory(void);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 141/189] x86/dumpstack: Avoid uninitlized variable

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit ebfc15019cfa72496c674ffcb0b8ef10790dcddc ]

In some configurations, 'partial' does not get initialized, as shown by
this gcc-8 warning:

arch/x86/kernel/dumpstack.c: In function 'show_trace_log_lvl':
arch/x86/kernel/dumpstack.c:156:4: error: 'partial' may be used uninitialized in this function [-Werror=maybe-uninitialized]
    show_regs_if_on_stack(&stack_info, regs, partial);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This initializes it to false, to get the previous behavior in this case.

Fixes: a9cdbe72c4e8 ("x86/dumpstack: Fix partial register dumps")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20180202145634.200291-1-arnd@arndb.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kernel/dumpstack.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index afbecff161d1..a2d8a3908670 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -109,7 +109,7 @@ void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
 	struct stack_info stack_info = {0};
 	unsigned long visit_mask = 0;
 	int graph_idx = 0;
-	bool partial;
+	bool partial = false;
 
 	printk("%sCall Trace:\n", log_lvl);
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 142/189] firmware: dmi_scan: Fix handling of empty DMI strings

[Sasha Levin]

From: Jean Delvare <jdelvare@suse.de>

[ Upstream commit a7770ae194569e96a93c48aceb304edded9cc648 ]

The handling of empty DMI strings looks quite broken to me:
* Strings from 1 to 7 spaces are not considered empty.
* True empty DMI strings (string index set to 0) are not considered
  empty, and result in allocating a 0-char string.
* Strings with invalid index also result in allocating a 0-char
  string.
* Strings starting with 8 spaces are all considered empty, even if
  non-space characters follow (sounds like a weird thing to do, but
  I have actually seen occurrences of this in DMI tables before.)
* Strings which are considered empty are reported as 8 spaces,
  instead of being actually empty.

Some of these issues are the result of an off-by-one error in memcmp,
the rest is incorrect by design.

So let's get it square: missing strings and strings made of only
spaces, regardless of their length, should be treated as empty and
no memory should be allocated for them. All other strings are
non-empty and should be allocated.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 79da4721117f ("x86: fix DMI out of memory problems")
Cc: Parag Warudkar <parag.warudkar@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/firmware/dmi_scan.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 783041964439..e8db9659a36b 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -18,7 +18,7 @@ EXPORT_SYMBOL_GPL(dmi_kobj);
  * of and an antecedent to, SMBIOS, which stands for System
  * Management BIOS.  See further: http://www.dmtf.org/standards
  */
-static const char dmi_empty_string[] = "        ";
+static const char dmi_empty_string[] = "";
 
 static u32 dmi_ver __initdata;
 static u32 dmi_len;
@@ -44,25 +44,21 @@ static int dmi_memdev_nr;
 static const char * __init dmi_string_nosave(const struct dmi_header *dm, u8 s)
 {
 	const u8 *bp = ((u8 *) dm) + dm->length;
+	const u8 *nsp;
 
 	if (s) {
-		s--;
-		while (s > 0 && *bp) {
+		while (--s > 0 && *bp)
 			bp += strlen(bp) + 1;
-			s--;
-		}
-
-		if (*bp != 0) {
-			size_t len = strlen(bp)+1;
-			size_t cmp_len = len > 8 ? 8 : len;
 
-			if (!memcmp(bp, dmi_empty_string, cmp_len))
-				return dmi_empty_string;
+		/* Strings containing only spaces are considered empty */
+		nsp = bp;
+		while (*nsp == ' ')
+			nsp++;
+		if (*nsp != '\0')
 			return bp;
-		}
 	}
 
-	return "";
+	return dmi_empty_string;
 }
 
 static const char * __init dmi_string(const struct dmi_header *dm, u8 s)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 143/189] ACPI: processor_perflib: Do not send _PPC change notification if not ready

[Sasha Levin]

From: Chen Yu <yu.c.chen@intel.com>

[ Upstream commit ba1edb9a5125a617d612f98eead14b9b84e75c3a ]

The following warning was triggered after resumed from S3 -
if all the nonboot CPUs were put offline before suspend:

[ 1840.329515] unchecked MSR access error: RDMSR from 0x771 at rIP: 0xffffffff86061e3a (native_read_msr+0xa/0x30)
[ 1840.329516] Call Trace:
[ 1840.329521]  __rdmsr_on_cpu+0x33/0x50
[ 1840.329525]  generic_exec_single+0x81/0xb0
[ 1840.329527]  smp_call_function_single+0xd2/0x100
[ 1840.329530]  ? acpi_ds_result_pop+0xdd/0xf2
[ 1840.329532]  ? acpi_ds_create_operand+0x215/0x23c
[ 1840.329534]  rdmsrl_on_cpu+0x57/0x80
[ 1840.329536]  ? cpumask_next+0x1b/0x20
[ 1840.329538]  ? rdmsrl_on_cpu+0x57/0x80
[ 1840.329541]  intel_pstate_update_perf_limits+0xf3/0x220
[ 1840.329544]  ? notifier_call_chain+0x4a/0x70
[ 1840.329546]  intel_pstate_set_policy+0x4e/0x150
[ 1840.329548]  cpufreq_set_policy+0xcd/0x2f0
[ 1840.329550]  cpufreq_update_policy+0xb2/0x130
[ 1840.329552]  ? cpufreq_update_policy+0x130/0x130
[ 1840.329556]  acpi_processor_ppc_has_changed+0x65/0x80
[ 1840.329558]  acpi_processor_notify+0x80/0x100
[ 1840.329561]  acpi_ev_notify_dispatch+0x44/0x5c
[ 1840.329563]  acpi_os_execute_deferred+0x14/0x20
[ 1840.329565]  process_one_work+0x193/0x3c0
[ 1840.329567]  worker_thread+0x35/0x3b0
[ 1840.329569]  kthread+0x125/0x140
[ 1840.329571]  ? process_one_work+0x3c0/0x3c0
[ 1840.329572]  ? kthread_park+0x60/0x60
[ 1840.329575]  ? do_syscall_64+0x67/0x180
[ 1840.329577]  ret_from_fork+0x25/0x30
[ 1840.329585] unchecked MSR access error: WRMSR to 0x774 (tried to write 0x0000000000000000) at rIP: 0xffffffff86061f78 (native_write_msr+0x8/0x30)
[ 1840.329586] Call Trace:
[ 1840.329587]  __wrmsr_on_cpu+0x37/0x40
[ 1840.329589]  generic_exec_single+0x81/0xb0
[ 1840.329592]  smp_call_function_single+0xd2/0x100
[ 1840.329594]  ? acpi_ds_create_operand+0x215/0x23c
[ 1840.329595]  ? cpumask_next+0x1b/0x20
[ 1840.329597]  wrmsrl_on_cpu+0x57/0x70
[ 1840.329598]  ? rdmsrl_on_cpu+0x57/0x80
[ 1840.329599]  ? wrmsrl_on_cpu+0x57/0x70
[ 1840.329602]  intel_pstate_hwp_set+0xd3/0x150
[ 1840.329604]  intel_pstate_set_policy+0x119/0x150
[ 1840.329606]  cpufreq_set_policy+0xcd/0x2f0
[ 1840.329607]  cpufreq_update_policy+0xb2/0x130
[ 1840.329610]  ? cpufreq_update_policy+0x130/0x130
[ 1840.329613]  acpi_processor_ppc_has_changed+0x65/0x80
[ 1840.329615]  acpi_processor_notify+0x80/0x100
[ 1840.329617]  acpi_ev_notify_dispatch+0x44/0x5c
[ 1840.329619]  acpi_os_execute_deferred+0x14/0x20
[ 1840.329620]  process_one_work+0x193/0x3c0
[ 1840.329622]  worker_thread+0x35/0x3b0
[ 1840.329624]  kthread+0x125/0x140
[ 1840.329625]  ? process_one_work+0x3c0/0x3c0
[ 1840.329626]  ? kthread_park+0x60/0x60
[ 1840.329628]  ? do_syscall_64+0x67/0x180
[ 1840.329631]  ret_from_fork+0x25/0x30

This is because if there's only one online CPU, the MSR_PM_ENABLE
(package wide)can not be enabled after resumed, due to
intel_pstate_hwp_enable() will only be invoked on AP's online
process after resumed - if there's no AP online, the HWP remains
disabled after resumed (BIOS has disabled it in S3). Then if
there comes a _PPC change notification which touches HWP register
during this stage, the warning is triggered.

Since we don't call acpi_processor_register_performance() when
HWP is enabled, the pr->performance will be NULL. When this is
NULL we don't need to do _PPC change notification.

Reported-by: Doug Smythies <dsmythies@telus.net>
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Yu Chen <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/acpi/processor_perflib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 18b72eec3507..c7cf48ad5cb9 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -159,7 +159,7 @@ void acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag)
 {
 	int ret;
 
-	if (ignore_ppc) {
+	if (ignore_ppc || !pr->performance) {
 		/*
 		 * Only when it is notification event, the _OST object
 		 * will be evaluated. Otherwise it is skipped.
-- 
2.15.1

[PATCH AUTOSEL for 4.15 144/189] ACPI / bus: Do not call _STA on battery devices with unmet dependencies

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 54ddce7062242036402242242c07c60c0b505f84 ]

The battery code uses acpi_device->dep_unmet to check for unmet deps and
if there are unmet deps it does not bind to the device to avoid errors
about missing OpRegions when calling ACPI methods on the device.

The missing OpRegions when there are unmet deps problem also applies to
the _STA method of some battery devices and calling it too early results
in errors like these:

[    0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
               [GenericSerialBus] (20170831/evregion-166)
[    0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler
               (20170831/exfldio-299)
[    0.123618] ACPI Error: Method parse/execution failed
               \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)

This commit fixes these errors happening when acpi_get_bus_status gets
called by checking dep_unmet for battery devices and reporting a status
of 0 until all dependencies are met.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/acpi/bus.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index b6d58cc58f5f..f0348e388d01 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -146,6 +146,12 @@ int acpi_bus_get_status(struct acpi_device *device)
 		return 0;
 	}
 
+	/* Battery devices must have their deps met before calling _STA */
+	if (acpi_device_is_battery(device) && device->dep_unmet) {
+		acpi_set_device_status(device, 0);
+		return 0;
+	}
+
 	status = acpi_bus_get_status_handle(device->handle, &sta);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 146/189] bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit 09584b406742413ac4c8d7e030374d4daa045b69 ]

With CONFIG_BPF_JIT_ALWAYS_ON is defined in the config file,
tools/testing/selftests/bpf/test_kmod.sh failed like below:
  [root@localhost bpf]# ./test_kmod.sh
  sysctl: setting key "net.core.bpf_jit_enable": Invalid argument
  [ JIT enabled:0 hardened:0 ]
  [  132.175681] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096
  [  132.458834] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed]
  [ JIT enabled:1 hardened:0 ]
  [  133.456025] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096
  [  133.730935] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed]
  [ JIT enabled:1 hardened:1 ]
  [  134.769730] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096
  [  135.050864] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed]
  [ JIT enabled:1 hardened:2 ]
  [  136.442882] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096
  [  136.821810] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed]
  [root@localhost bpf]#

The test_kmod.sh load/remove test_bpf.ko multiple times with different
settings for sysctl net.core.bpf_jit_{enable,harden}. The failed test #297
of test_bpf.ko is designed such that JIT always fails.

Commit 290af86629b2 (bpf: introduce BPF_JIT_ALWAYS_ON config)
introduced the following tightening logic:
    ...
        if (!bpf_prog_is_dev_bound(fp->aux)) {
                fp = bpf_int_jit_compile(fp);
    #ifdef CONFIG_BPF_JIT_ALWAYS_ON
                if (!fp->jited) {
                        *err = -ENOTSUPP;
                        return fp;
                }
    #endif
    ...
With this logic, Test #297 always gets return value -ENOTSUPP
when CONFIG_BPF_JIT_ALWAYS_ON is defined, causing the test failure.

This patch fixed the failure by marking Test #297 as expected failure
when CONFIG_BPF_JIT_ALWAYS_ON is defined.

Fixes: 290af86629b2 (bpf: introduce BPF_JIT_ALWAYS_ON config)
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 lib/test_bpf.c | 31 ++++++++++++++++++++++++++-----
 1 file changed, 26 insertions(+), 5 deletions(-)

diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index f369889e521d..8076e693f86e 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -83,6 +83,7 @@ struct bpf_test {
 		__u32 result;
 	} test[MAX_SUBTESTS];
 	int (*fill_helper)(struct bpf_test *self);
+	int expected_errcode; /* used when FLAG_EXPECTED_FAIL is set in the aux */
 	__u8 frag_data[MAX_DATA];
 	int stack_depth; /* for eBPF only, since tests don't call verifier */
 };
@@ -2022,7 +2023,9 @@ static struct bpf_test tests[] = {
 		},
 		CLASSIC | FLAG_NO_DATA | FLAG_EXPECTED_FAIL,
 		{ },
-		{ }
+		{ },
+		.fill_helper = NULL,
+		.expected_errcode = -EINVAL,
 	},
 	{
 		"check: div_k_0",
@@ -2032,7 +2035,9 @@ static struct bpf_test tests[] = {
 		},
 		CLASSIC | FLAG_NO_DATA | FLAG_EXPECTED_FAIL,
 		{ },
-		{ }
+		{ },
+		.fill_helper = NULL,
+		.expected_errcode = -EINVAL,
 	},
 	{
 		"check: unknown insn",
@@ -2043,7 +2048,9 @@ static struct bpf_test tests[] = {
 		},
 		CLASSIC | FLAG_EXPECTED_FAIL,
 		{ },
-		{ }
+		{ },
+		.fill_helper = NULL,
+		.expected_errcode = -EINVAL,
 	},
 	{
 		"check: out of range spill/fill",
@@ -2053,7 +2060,9 @@ static struct bpf_test tests[] = {
 		},
 		CLASSIC | FLAG_NO_DATA | FLAG_EXPECTED_FAIL,
 		{ },
-		{ }
+		{ },
+		.fill_helper = NULL,
+		.expected_errcode = -EINVAL,
 	},
 	{
 		"JUMPS + HOLES",
@@ -2145,6 +2154,8 @@ static struct bpf_test tests[] = {
 		CLASSIC | FLAG_NO_DATA | FLAG_EXPECTED_FAIL,
 		{ },
 		{ },
+		.fill_helper = NULL,
+		.expected_errcode = -EINVAL,
 	},
 	{
 		"check: LDX + RET X",
@@ -2155,6 +2166,8 @@ static struct bpf_test tests[] = {
 		CLASSIC | FLAG_NO_DATA | FLAG_EXPECTED_FAIL,
 		{ },
 		{ },
+		.fill_helper = NULL,
+		.expected_errcode = -EINVAL,
 	},
 	{	/* Mainly checking JIT here. */
 		"M[]: alt STX + LDX",
@@ -2329,6 +2342,8 @@ static struct bpf_test tests[] = {
 		CLASSIC | FLAG_NO_DATA | FLAG_EXPECTED_FAIL,
 		{ },
 		{ },
+		.fill_helper = NULL,
+		.expected_errcode = -EINVAL,
 	},
 	{	/* Passes checker but fails during runtime. */
 		"LD [SKF_AD_OFF-1]",
@@ -5391,6 +5406,7 @@ static struct bpf_test tests[] = {
 		{ },
 		{ },
 		.fill_helper = bpf_fill_maxinsns4,
+		.expected_errcode = -EINVAL,
 	},
 	{	/* Mainly checking JIT here. */
 		"BPF_MAXINSNS: Very long jump",
@@ -5446,10 +5462,15 @@ static struct bpf_test tests[] = {
 	{
 		"BPF_MAXINSNS: Jump, gap, jump, ...",
 		{ },
+#ifdef CONFIG_BPF_JIT_ALWAYS_ON
+		CLASSIC | FLAG_NO_DATA | FLAG_EXPECTED_FAIL,
+#else
 		CLASSIC | FLAG_NO_DATA,
+#endif
 		{ },
 		{ { 0, 0xababcbac } },
 		.fill_helper = bpf_fill_maxinsns11,
+		.expected_errcode = -ENOTSUPP,
 	},
 	{
 		"BPF_MAXINSNS: ld_abs+get_processor_id",
@@ -6236,7 +6257,7 @@ static struct bpf_prog *generate_filter(int which, int *err)
 
 		*err = bpf_prog_create(&fp, &fprog);
 		if (tests[which].aux & FLAG_EXPECTED_FAIL) {
-			if (*err == -EINVAL) {
+			if (*err == tests[which].expected_errcode) {
 				pr_cont("PASS\n");
 				/* Verifier rejected filter as expected. */
 				*err = 0;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 145/189] ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 63347db0affadcbccd5613116ea8431c70139b3e ]

The acpi_get_bus_status wrapper for acpi_bus_get_status_handle has some
code to handle certain device quirks, in some cases we also need this
quirk handling for the initial _STA call.

Specifically on some devices calling _STA before all _DEP dependencies
are met results in errors like these:

[    0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
               [GenericSerialBus] (20170831/evregion-166)
[    0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler
               (20170831/exfldio-299)
[    0.123618] ACPI Error: Method parse/execution failed
               \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)

acpi_get_bus_status already has code to avoid this, so by using it we
also silence these errors from the initial _STA call.

Note that in order for the acpi_get_bus_status handling for this to work,
we initialize dep_unmet to 1 until acpi_device_dep_initialize gets called,
this means that battery devices will be instantiated with an initial
status of 0. This is not a problem, acpi_bus_attach will get called soon
after the instantiation anyways and it will update the status as first
point of order.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/acpi/scan.c | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index b0fe5272c76a..8e63d937babb 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1565,6 +1565,8 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
 	device_initialize(&device->dev);
 	dev_set_uevent_suppress(&device->dev, true);
 	acpi_init_coherency(device);
+	/* Assume there are unmet deps until acpi_device_dep_initialize() runs */
+	device->dep_unmet = 1;
 }
 
 void acpi_device_add_finalize(struct acpi_device *device)
@@ -1588,6 +1590,14 @@ static int acpi_add_single_object(struct acpi_device **child,
 	}
 
 	acpi_init_device_object(device, handle, type, sta);
+	/*
+	 * For ACPI_BUS_TYPE_DEVICE getting the status is delayed till here so
+	 * that we can call acpi_bus_get_status() and use its quirk handling.
+	 * Note this must be done before the get power-/wakeup_dev-flags calls.
+	 */
+	if (type == ACPI_BUS_TYPE_DEVICE)
+		acpi_bus_get_status(device);
+
 	acpi_bus_get_power_flags(device);
 	acpi_bus_get_wakeup_device_flags(device);
 
@@ -1660,9 +1670,11 @@ static int acpi_bus_type_and_status(acpi_handle handle, int *type,
 			return -ENODEV;
 
 		*type = ACPI_BUS_TYPE_DEVICE;
-		status = acpi_bus_get_status_handle(handle, sta);
-		if (ACPI_FAILURE(status))
-			*sta = 0;
+		/*
+		 * acpi_add_single_object updates this once we've an acpi_device
+		 * so that acpi_bus_get_status' quirk handling can be used.
+		 */
+		*sta = 0;
 		break;
 	case ACPI_TYPE_PROCESSOR:
 		*type = ACPI_BUS_TYPE_PROCESSOR;
@@ -1760,6 +1772,8 @@ static void acpi_device_dep_initialize(struct acpi_device *adev)
 	acpi_status status;
 	int i;
 
+	adev->dep_unmet = 0;
+
 	if (!acpi_has_method(adev->handle, "_DEP"))
 		return;
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 147/189] MIPS: generic: Fix machine compatible matching

[Sasha Levin]

From: James Hogan <jhogan@kernel.org>

[ Upstream commit 9a9ab3078e2744a1a55163cfaec73a5798aae33e ]

We now have a platform (Ranchu) in the "generic" platform which matches
based on the FDT compatible string using mips_machine_is_compatible(),
however that function doesn't stop at a blank struct
of_device_id::compatible as that is an array in the struct, not a
pointer to a string.

Fix the loop completion to check the first byte of the compatible array
rather than the address of the compatible array in the struct.

Fixes: eed0eabd12ef ("MIPS: generic: Introduce generic DT-based board support")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18580/
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/include/asm/machine.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/machine.h b/arch/mips/include/asm/machine.h
index e0d9b373d415..f83879dadd1e 100644
--- a/arch/mips/include/asm/machine.h
+++ b/arch/mips/include/asm/machine.h
@@ -52,7 +52,7 @@ mips_machine_is_compatible(const struct mips_machine *mach, const void *fdt)
 	if (!mach->matches)
 		return NULL;
 
-	for (match = mach->matches; match->compatible; match++) {
+	for (match = mach->matches; match->compatible[0]; match++) {
 		if (fdt_node_check_compatible(fdt, 0, match->compatible) == 0)
 			return match;
 	}
-- 
2.15.1

[PATCH AUTOSEL for 4.15 148/189] MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS

[Sasha Levin]

From: Matt Redfearn <matt.redfearn@mips.com>

[ Upstream commit 0cde5b44a30f1daaef1c34e08191239dc63271c4 ]

When commit b27311e1cace ("MIPS: TXx9: Add RBTX4939 board support")
added board support for the RBTX4939, it added a call to
led_classdev_register even if the LED class is built as a module.
Built-in arch code cannot call module code directly like this. Commit
b33b44073734 ("MIPS: TXX9: use IS_ENABLED() macro") subsequently
changed the inclusion of this code to a single check that
CONFIG_LEDS_CLASS is either builtin or a module, but the same issue
remains.

This leads to MIPS allmodconfig builds failing when CONFIG_MACH_TX49XX=y
is set:

arch/mips/txx9/rbtx4939/setup.o: In function `rbtx4939_led_probe':
setup.c:(.init.text+0xc0): undefined reference to `of_led_classdev_register'
make: *** [Makefile:999: vmlinux] Error 1

Fix this by using the IS_BUILTIN() macro instead.

Fixes: b27311e1cace ("MIPS: TXx9: Add RBTX4939 board support")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18544/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/txx9/rbtx4939/setup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index 8b937300fb7f..fd26fadc8617 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -186,7 +186,7 @@ static void __init rbtx4939_update_ioc_pen(void)
 
 #define RBTX4939_MAX_7SEGLEDS	8
 
-#if IS_ENABLED(CONFIG_LEDS_CLASS)
+#if IS_BUILTIN(CONFIG_LEDS_CLASS)
 static u8 led_val[RBTX4939_MAX_7SEGLEDS];
 struct rbtx4939_led_data {
 	struct led_classdev cdev;
@@ -261,7 +261,7 @@ static inline void rbtx4939_led_setup(void)
 
 static void __rbtx4939_7segled_putc(unsigned int pos, unsigned char val)
 {
-#if IS_ENABLED(CONFIG_LEDS_CLASS)
+#if IS_BUILTIN(CONFIG_LEDS_CLASS)
 	unsigned long flags;
 	local_irq_save(flags);
 	/* bit7: reserved for LED class */
-- 
2.15.1

[PATCH AUTOSEL for 4.15 149/189] perf record: Fix period option handling

[Sasha Levin]

From: Jiri Olsa <jolsa@kernel.org>

[ Upstream commit f290aa1ffa45ed7e37599840878b4dae68269ee1 ]

Stephan reported we don't unset PERIOD sample type when --no-period is
specified. Adding the unset check and reset PERIOD if --no-period is
specified.

Committer notes:

Check the sample_type, it shouldn't have PERF_SAMPLE_PERIOD there when
--no-period is used.

Before:

  # perf record --no-period sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.018 MB perf.data (7 samples) ]
  # perf evlist -v
  cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  #

After:

[root@jouet ~]# perf record --no-period sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data (17 samples) ]
[root@jouet ~]# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
[root@jouet ~]#

Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180201083812.11359-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/builtin-record.c |  3 ++-
 tools/perf/perf.h           |  1 +
 tools/perf/util/evsel.c     | 11 ++++++++---
 3 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 003255910c05..2ccb709c0b08 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -1533,7 +1533,8 @@ static struct option __record_options[] = {
 	OPT_BOOLEAN_SET('T', "timestamp", &record.opts.sample_time,
 			&record.opts.sample_time_set,
 			"Record the sample timestamps"),
-	OPT_BOOLEAN('P', "period", &record.opts.period, "Record the sample period"),
+	OPT_BOOLEAN_SET('P', "period", &record.opts.period, &record.opts.period_set,
+			"Record the sample period"),
 	OPT_BOOLEAN('n', "no-samples", &record.opts.no_samples,
 		    "don't sample"),
 	OPT_BOOLEAN_SET('N', "no-buildid-cache", &record.no_buildid_cache,
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index 2357f4ccc9c7..cfe46236a5e5 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -50,6 +50,7 @@ struct record_opts {
 	bool	     sample_time_set;
 	bool	     sample_cpu;
 	bool	     period;
+	bool	     period_set;
 	bool	     running_time;
 	bool	     full_auxtrace;
 	bool	     auxtrace_snapshot_mode;
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 784d852c91cc..d23a8c51b307 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -948,9 +948,6 @@ void perf_evsel__config(struct perf_evsel *evsel, struct record_opts *opts,
 	if (target__has_cpu(&opts->target) || opts->sample_cpu)
 		perf_evsel__set_sample_bit(evsel, CPU);
 
-	if (opts->period)
-		perf_evsel__set_sample_bit(evsel, PERIOD);
-
 	/*
 	 * When the user explicitly disabled time don't force it here.
 	 */
@@ -1052,6 +1049,14 @@ void perf_evsel__config(struct perf_evsel *evsel, struct record_opts *opts,
 	apply_config_terms(evsel, opts);
 
 	evsel->ignore_missing_thread = opts->ignore_missing_thread;
+
+	/* The --period option takes the precedence. */
+	if (opts->period_set) {
+		if (opts->period)
+			perf_evsel__set_sample_bit(evsel, PERIOD);
+		else
+			perf_evsel__reset_sample_bit(evsel, PERIOD);
+	}
 }
 
 static int perf_evsel__alloc_fd(struct perf_evsel *evsel, int ncpus, int nthreads)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 150/189] MIPS: Generic: Support GIC in EIC mode

[Sasha Levin]

From: Matt Redfearn <matt.redfearn@mips.com>

[ Upstream commit 7bf8b16d1b60419c865e423b907a05f413745b3e ]

The GIC supports running in External Interrupt Controller (EIC) mode,
and will signal this via cpu_has_veic if enabled in hardware. Currently
the generic kernel will panic if cpu_has_veic is set - but the GIC can
legitimately set this flag if either configured to boot in EIC mode, or
if the GIC driver enables this mode. Make the kernel not panic in this
case, and instead just check if the GIC is present. If so, use it's CPU
local interrupt routing functions. If an EIC is present, but it is not
the GIC, then the kernel does not know how to get the VIRQ for the CPU
local interrupts and should panic. Support for alternative EICs being
present is needed here for the generic kernel to support them.

Suggested-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18191/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/generic/irq.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/mips/generic/irq.c b/arch/mips/generic/irq.c
index 394f8161e462..cb7fdaeef426 100644
--- a/arch/mips/generic/irq.c
+++ b/arch/mips/generic/irq.c
@@ -22,10 +22,10 @@ int get_c0_fdc_int(void)
 {
 	int mips_cpu_fdc_irq;
 
-	if (cpu_has_veic)
-		panic("Unimplemented!");
-	else if (mips_gic_present())
+	if (mips_gic_present())
 		mips_cpu_fdc_irq = gic_get_c0_fdc_int();
+	else if (cpu_has_veic)
+		panic("Unimplemented!");
 	else if (cp0_fdc_irq >= 0)
 		mips_cpu_fdc_irq = MIPS_CPU_IRQ_BASE + cp0_fdc_irq;
 	else
@@ -38,10 +38,10 @@ int get_c0_perfcount_int(void)
 {
 	int mips_cpu_perf_irq;
 
-	if (cpu_has_veic)
-		panic("Unimplemented!");
-	else if (mips_gic_present())
+	if (mips_gic_present())
 		mips_cpu_perf_irq = gic_get_c0_perfcount_int();
+	else if (cpu_has_veic)
+		panic("Unimplemented!");
 	else if (cp0_perfcount_irq >= 0)
 		mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
 	else
@@ -54,10 +54,10 @@ unsigned int get_c0_compare_int(void)
 {
 	int mips_cpu_timer_irq;
 
-	if (cpu_has_veic)
-		panic("Unimplemented!");
-	else if (mips_gic_present())
+	if (mips_gic_present())
 		mips_cpu_timer_irq = gic_get_c0_compare_int();
+	else if (cpu_has_veic)
+		panic("Unimplemented!");
 	else
 		mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 152/189] xen-netfront: Fix race between device setup and open

[Sasha Levin]

From: Ross Lagerwall <ross.lagerwall@citrix.com>

[ Upstream commit f599c64fdf7d9c108e8717fb04bc41c680120da4 ]

When a netfront device is set up it registers a netdev fairly early on,
before it has set up the queues and is actually usable. A userspace tool
like NetworkManager will immediately try to open it and access its state
as soon as it appears. The bug can be reproduced by hotplugging VIFs
until the VM runs out of grant refs. It registers the netdev but fails
to set up any queues (since there are no more grant refs). In the
meantime, NetworkManager opens the device and the kernel crashes trying
to access the queues (of which there are none).

Fix this in two ways:
* For initial setup, register the netdev much later, after the queues
are setup. This avoids the race entirely.
* During a suspend/resume cycle, the frontend reconnects to the backend
and the queues are recreated. It is possible (though highly unlikely) to
race with something opening the device and accessing the queues after
they have been destroyed but before they have been recreated. Extend the
region covered by the rtnl semaphore to protect against this race. There
is a possibility that we fail to recreate the queues so check for this
in the open function.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/xen-netfront.c | 46 ++++++++++++++++++++++++----------------------
 1 file changed, 24 insertions(+), 22 deletions(-)

diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 9bd7ddeeb6a5..8328d395e332 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -351,6 +351,9 @@ static int xennet_open(struct net_device *dev)
 	unsigned int i = 0;
 	struct netfront_queue *queue = NULL;
 
+	if (!np->queues)
+		return -ENODEV;
+
 	for (i = 0; i < num_queues; ++i) {
 		queue = &np->queues[i];
 		napi_enable(&queue->napi);
@@ -1358,18 +1361,8 @@ static int netfront_probe(struct xenbus_device *dev,
 #ifdef CONFIG_SYSFS
 	info->netdev->sysfs_groups[0] = &xennet_dev_group;
 #endif
-	err = register_netdev(info->netdev);
-	if (err) {
-		pr_warn("%s: register_netdev err=%d\n", __func__, err);
-		goto fail;
-	}
 
 	return 0;
-
- fail:
-	xennet_free_netdev(netdev);
-	dev_set_drvdata(&dev->dev, NULL);
-	return err;
 }
 
 static void xennet_end_access(int ref, void *page)
@@ -1737,8 +1730,6 @@ static void xennet_destroy_queues(struct netfront_info *info)
 {
 	unsigned int i;
 
-	rtnl_lock();
-
 	for (i = 0; i < info->netdev->real_num_tx_queues; i++) {
 		struct netfront_queue *queue = &info->queues[i];
 
@@ -1747,8 +1738,6 @@ static void xennet_destroy_queues(struct netfront_info *info)
 		netif_napi_del(&queue->napi);
 	}
 
-	rtnl_unlock();
-
 	kfree(info->queues);
 	info->queues = NULL;
 }
@@ -1764,8 +1753,6 @@ static int xennet_create_queues(struct netfront_info *info,
 	if (!info->queues)
 		return -ENOMEM;
 
-	rtnl_lock();
-
 	for (i = 0; i < *num_queues; i++) {
 		struct netfront_queue *queue = &info->queues[i];
 
@@ -1774,7 +1761,7 @@ static int xennet_create_queues(struct netfront_info *info,
 
 		ret = xennet_init_queue(queue);
 		if (ret < 0) {
-			dev_warn(&info->netdev->dev,
+			dev_warn(&info->xbdev->dev,
 				 "only created %d queues\n", i);
 			*num_queues = i;
 			break;
@@ -1788,10 +1775,8 @@ static int xennet_create_queues(struct netfront_info *info,
 
 	netif_set_real_num_tx_queues(info->netdev, *num_queues);
 
-	rtnl_unlock();
-
 	if (*num_queues == 0) {
-		dev_err(&info->netdev->dev, "no queues\n");
+		dev_err(&info->xbdev->dev, "no queues\n");
 		return -EINVAL;
 	}
 	return 0;
@@ -1828,6 +1813,7 @@ static int talk_to_netback(struct xenbus_device *dev,
 		goto out;
 	}
 
+	rtnl_lock();
 	if (info->queues)
 		xennet_destroy_queues(info);
 
@@ -1838,6 +1824,7 @@ static int talk_to_netback(struct xenbus_device *dev,
 		info->queues = NULL;
 		goto out;
 	}
+	rtnl_unlock();
 
 	/* Create shared ring, alloc event channel -- for each queue */
 	for (i = 0; i < num_queues; ++i) {
@@ -1934,8 +1921,10 @@ abort_transaction_no_dev_fatal:
 	xenbus_transaction_end(xbt, 1);
  destroy_ring:
 	xennet_disconnect_backend(info);
+	rtnl_lock();
 	xennet_destroy_queues(info);
  out:
+	rtnl_unlock();
 	device_unregister(&dev->dev);
 	return err;
 }
@@ -1965,6 +1954,15 @@ static int xennet_connect(struct net_device *dev)
 	netdev_update_features(dev);
 	rtnl_unlock();
 
+	if (dev->reg_state == NETREG_UNINITIALIZED) {
+		err = register_netdev(dev);
+		if (err) {
+			pr_warn("%s: register_netdev err=%d\n", __func__, err);
+			device_unregister(&np->xbdev->dev);
+			return err;
+		}
+	}
+
 	/*
 	 * All public and private state should now be sane.  Get
 	 * ready to start sending and receiving packets and give the driver
@@ -2150,10 +2148,14 @@ static int xennet_remove(struct xenbus_device *dev)
 
 	xennet_disconnect_backend(info);
 
-	unregister_netdev(info->netdev);
+	if (info->netdev->reg_state == NETREG_REGISTERED)
+		unregister_netdev(info->netdev);
 
-	if (info->queues)
+	if (info->queues) {
+		rtnl_lock();
 		xennet_destroy_queues(info);
+		rtnl_unlock();
+	}
 	xennet_free_netdev(info->netdev);
 
 	return 0;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 151/189] perf evsel: Fix period/freq terms setup

[Sasha Levin]

From: Jiri Olsa <jolsa@kernel.org>

[ Upstream commit 49c0ae80eb32426fa133246200628e529067c595 ]

Stephane reported that we don't set properly PERIOD sample type for
events with period term defined.

Before:
  $ perf record -e cpu/cpu-cycles,period=1000/u ls
  $ perf evlist -v
  cpu/cpu-cycles,period=1000/u: ... sample_type: IP|TID|TIME|PERIOD, ...

After:
  $ perf record -e cpu/cpu-cycles,period=1000/u ls
  $ perf evlist -v
  cpu/cpu-cycles,period=1000/u: ... sample_type: IP|TID|TIME, ...

Setting PERIOD sample type based on period term setup.

Committer note:

When we use -c or a period=N term in the event definition, then we don't
need to ask the kernel, for this event, via perf_event_attr.sample_type
|= PERF_SAMPLE_PERIOD, to put the event period in each sample for this
event, as we know it already, it is in perf_event_attr.sample_period.

Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180201083812.11359-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/util/evsel.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index d23a8c51b307..7349a5d22464 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -736,12 +736,14 @@ static void apply_config_terms(struct perf_evsel *evsel,
 			if (!(term->weak && opts->user_interval != ULLONG_MAX)) {
 				attr->sample_period = term->val.period;
 				attr->freq = 0;
+				perf_evsel__reset_sample_bit(evsel, PERIOD);
 			}
 			break;
 		case PERF_EVSEL__CONFIG_TERM_FREQ:
 			if (!(term->weak && opts->user_freq != UINT_MAX)) {
 				attr->sample_freq = term->val.freq;
 				attr->freq = 1;
+				perf_evsel__set_sample_bit(evsel, PERIOD);
 			}
 			break;
 		case PERF_EVSEL__CONFIG_TERM_TIME:
-- 
2.15.1

[PATCH AUTOSEL for 4.15 153/189] xen/grant-table: Use put_page instead of free_page

[Sasha Levin]

From: Ross Lagerwall <ross.lagerwall@citrix.com>

[ Upstream commit 3ac7292a25db1c607a50752055a18aba32ac2176 ]

The page given to gnttab_end_foreign_access() to free could be a
compound page so use put_page() instead of free_page() since it can
handle both compound and single pages correctly.

This bug was discovered when migrating a Xen VM with several VIFs and
CONFIG_DEBUG_VM enabled. It hits a BUG usually after fewer than 10
iterations. All netfront devices disconnect from the backend during a
suspend/resume and this will call gnttab_end_foreign_access() if a
netfront queue has an outstanding skb. The mismatch between calling
get_page() and free_page() on a compound page causes a reference
counting error which is detected when DEBUG_VM is enabled.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/xen/grant-table.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index f45114fd8e1e..27be107d6480 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -382,7 +382,7 @@ static void gnttab_handle_deferred(struct timer_list *unused)
 			if (entry->page) {
 				pr_debug("freeing g.e. %#x (pfn %#lx)\n",
 					 entry->ref, page_to_pfn(entry->page));
-				__free_page(entry->page);
+				put_page(entry->page);
 			} else
 				pr_info("freeing g.e. %#x\n", entry->ref);
 			kfree(entry);
@@ -438,7 +438,7 @@ void gnttab_end_foreign_access(grant_ref_t ref, int readonly,
 	if (gnttab_end_foreign_access_ref(ref, readonly)) {
 		put_free_entry(ref);
 		if (page != 0)
-			free_page(page);
+			put_page(virt_to_page(page));
 	} else
 		gnttab_add_deferred(ref, readonly,
 				    page ? virt_to_page(page) : NULL);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 154/189] bpf: sockmap, fix leaking maps with attached but not detached progs

[Sasha Levin]

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit 3d9e952697de89b53227f06d4241f275eb99cfc4 ]

When a program is attached to a map we increment the program refcnt
to ensure that the program is not removed while it is potentially
being referenced from sockmap side. However, if this same program
also references the map (this is a reasonably common pattern in
my programs) then the verifier will also increment the maps refcnt
from the verifier. This is to ensure the map doesn't get garbage
collected while the program has a reference to it.

So we are left in a state where the map holds the refcnt on the
program stopping it from being removed and releasing the map refcnt.
And vice versa the program holds a refcnt on the map stopping it
from releasing the refcnt on the prog.

All this is fine as long as users detach the program while the
map fd is still around. But, if the user omits this detach command
we are left with a dangling map we can no longer release.

To resolve this when the map fd is released decrement the program
references and remove any reference from the map to the program.
This fixes the issue with possibly dangling map and creates a
user side API constraint. That is, the map fd must be held open
for programs to be attached to a map.

Fixes: 174a79ff9515 ("bpf: sockmap with sk redirect support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/bpf/sockmap.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c
index 1712d319c2d8..7965398a3070 100644
--- a/kernel/bpf/sockmap.c
+++ b/kernel/bpf/sockmap.c
@@ -604,11 +604,6 @@ static void sock_map_free(struct bpf_map *map)
 	}
 	rcu_read_unlock();
 
-	if (stab->bpf_verdict)
-		bpf_prog_put(stab->bpf_verdict);
-	if (stab->bpf_parse)
-		bpf_prog_put(stab->bpf_parse);
-
 	sock_map_remove_complete(stab);
 }
 
@@ -880,6 +875,19 @@ static int sock_map_update_elem(struct bpf_map *map,
 	return err;
 }
 
+static void sock_map_release(struct bpf_map *map, struct file *map_file)
+{
+	struct bpf_stab *stab = container_of(map, struct bpf_stab, map);
+	struct bpf_prog *orig;
+
+	orig = xchg(&stab->bpf_parse, NULL);
+	if (orig)
+		bpf_prog_put(orig);
+	orig = xchg(&stab->bpf_verdict, NULL);
+	if (orig)
+		bpf_prog_put(orig);
+}
+
 const struct bpf_map_ops sock_map_ops = {
 	.map_alloc = sock_map_alloc,
 	.map_free = sock_map_free,
@@ -887,6 +895,7 @@ const struct bpf_map_ops sock_map_ops = {
 	.map_get_next_key = sock_map_get_next_key,
 	.map_update_elem = sock_map_update_elem,
 	.map_delete_elem = sock_map_delete_elem,
+	.map_release = sock_map_release,
 };
 
 BPF_CALL_4(bpf_sock_map_update, struct bpf_sock_ops_kern *, bpf_sock,
-- 
2.15.1

[PATCH AUTOSEL for 4.15 156/189] arm64: spinlock: Fix theoretical trylock() A-B-A with LSE atomics

[Sasha Levin]

From: Will Deacon <will.deacon@arm.com>

[ Upstream commit 202fb4ef81e3ec765c23bd1e6746a5c25b797d0e ]

If the spinlock "next" ticket wraps around between the initial LDR
and the cmpxchg in the LSE version of spin_trylock, then we can erroneously
think that we have successfuly acquired the lock because we only check
whether the next ticket return by the cmpxchg is equal to the owner ticket
in our updated lock word.

This patch fixes the issue by performing a full 32-bit check of the lock
word when trying to determine whether or not the CASA instruction updated
memory.

Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm64/include/asm/spinlock.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h
index fdb827c7832f..ebdae15d665d 100644
--- a/arch/arm64/include/asm/spinlock.h
+++ b/arch/arm64/include/asm/spinlock.h
@@ -87,8 +87,8 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 	"	cbnz	%w1, 1f\n"
 	"	add	%w1, %w0, %3\n"
 	"	casa	%w0, %w1, %2\n"
-	"	and	%w1, %w1, #0xffff\n"
-	"	eor	%w1, %w1, %w0, lsr #16\n"
+	"	sub	%w1, %w1, %3\n"
+	"	eor	%w1, %w1, %w0\n"
 	"1:")
 	: "=&r" (lockval), "=&r" (tmp), "+Q" (*lock)
 	: "I" (1 << TICKET_SHIFT)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 155/189] RDS: IB: Fix null pointer issue

[Sasha Levin]

From: Guanglei Li <guanglei.li@oracle.com>

[ Upstream commit 2c0aa08631b86a4678dbc93b9caa5248014b4458 ]

Scenario:
1. Port down and do fail over
2. Ap do rds_bind syscall

PID: 47039  TASK: ffff89887e2fe640  CPU: 47  COMMAND: "kworker/u:6"
 #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9
 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3
 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518
 #3 [ffff898e35f15b60] no_context at ffffffff8104854c
 #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675
 #5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3
 #6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8
 #7 [ffff898e35f15d10] page_fault at ffffffff8150ea95
    [exception RIP: unknown or invalid address]
    RIP: 0000000000000000  RSP: ffff898e35f15dc8  RFLAGS: 00010282
    RAX: 00000000fffffffe  RBX: ffff889b77f6fc00  RCX:ffffffff81c99d88
    RDX: 0000000000000000  RSI: ffff896019ee08e8  RDI:ffff889b77f6fc00
    RBP: ffff898e35f15df0   R8: ffff896019ee08c8  R9:0000000000000000
    R10: 0000000000000400  R11: 0000000000000000  R12:ffff896019ee08c0
    R13: ffff889b77f6fe68  R14: ffffffff81c99d80  R15: ffffffffa022a1e0
    ORIG_RAX: ffffffffffffffff  CS: 0010 SS: 0018
 #8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm]
 #9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6
 #10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0
 #11 [ffff898e35f15ee8] kthread at ffffffff81090fe6

PID: 45659  TASK: ffff880d313d2500  CPU: 31  COMMAND: "oracle_45659_ap"
 #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4
 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf
 #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7
 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb
 #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm]
 #5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma]
 #6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds]
 #7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds]
 #8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670

PID: 45659                          PID: 47039
rds_ib_laddr_check
  /* create id_priv with a null event_handler */
  rdma_create_id
  rdma_bind_addr
    cma_acquire_dev
      /* add id_priv to cma_dev->id_list */
      cma_attach_to_dev
                                    cma_ndev_work_handler
                                      /* event_hanlder is null */
                                      id_priv->id.event_handler

Signed-off-by: Guanglei Li <guanglei.li@oracle.com>
Signed-off-by: Honglei Wang <honglei.wang@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yanjun Zhu <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/rds/ib.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/rds/ib.c b/net/rds/ib.c
index 36dd2099048a..04da68e5dbe6 100644
--- a/net/rds/ib.c
+++ b/net/rds/ib.c
@@ -347,7 +347,8 @@ static int rds_ib_laddr_check(struct net *net, __be32 addr)
 	/* Create a CMA ID and try to bind it. This catches both
 	 * IB and iWARP capable NICs.
 	 */
-	cm_id = rdma_create_id(&init_net, NULL, NULL, RDMA_PS_TCP, IB_QPT_RC);
+	cm_id = rdma_create_id(&init_net, rds_rdma_cm_event_handler,
+			       NULL, RDMA_PS_TCP, IB_QPT_RC);
 	if (IS_ERR(cm_id))
 		return PTR_ERR(cm_id);
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 157/189] proc: fix /proc/*/map_files lookup

[Sasha Levin]

From: Alexey Dobriyan <adobriyan@gmail.com>

[ Upstream commit ac7f1061c2c11bb8936b1b6a94cdb48de732f7a4 ]

Current code does:

	if (sscanf(dentry->d_name.name, "%lx-%lx", start, end) != 2)

However sscanf() is broken garbage.

It silently accepts whitespace between format specifiers
(did you know that?).

It silently accepts valid strings which result in integer overflow.

Do not use sscanf() for any even remotely reliable parsing code.

	OK
	# readlink '/proc/1/map_files/55a23af39000-55a23b05b000'
	/lib/systemd/systemd

	broken
	# readlink '/proc/1/map_files/               55a23af39000-55a23b05b000'
	/lib/systemd/systemd

	broken
	# readlink '/proc/1/map_files/55a23af39000-55a23b05b000    '
	/lib/systemd/systemd

	very broken
	# readlink '/proc/1/map_files/1000000000000000055a23af39000-55a23b05b000'
	/lib/systemd/systemd

Andrei said:

: This patch breaks criu.  It was a bug in criu.  And this bug is on a minor
: path, which works when memfd_create() isn't available.  It is a reason why
: I ask to not backport this patch to stable kernels.
:
: In CRIU this bug can be triggered, only if this patch will be backported
: to a kernel which version is lower than v3.16.

Link: http://lkml.kernel.org/r/20171120212706.GA14325@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/proc/base.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/fs/proc/base.c b/fs/proc/base.c
index 60316b52d659..7165e7419bd0 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -100,6 +100,8 @@
 #include "internal.h"
 #include "fd.h"
 
+#include "../../lib/kstrtox.h"
+
 /* NOTE:
  *	Implementing inode permission operations in /proc is almost
  *	certainly an error.  Permission checks need to happen during
@@ -1907,8 +1909,33 @@ end_instantiate:
 static int dname_to_vma_addr(struct dentry *dentry,
 			     unsigned long *start, unsigned long *end)
 {
-	if (sscanf(dentry->d_name.name, "%lx-%lx", start, end) != 2)
+	const char *str = dentry->d_name.name;
+	unsigned long long sval, eval;
+	unsigned int len;
+
+	len = _parse_integer(str, 16, &sval);
+	if (len & KSTRTOX_OVERFLOW)
+		return -EINVAL;
+	if (sval != (unsigned long)sval)
+		return -EINVAL;
+	str += len;
+
+	if (*str != '-')
 		return -EINVAL;
+	str++;
+
+	len = _parse_integer(str, 16, &eval);
+	if (len & KSTRTOX_OVERFLOW)
+		return -EINVAL;
+	if (eval != (unsigned long)eval)
+		return -EINVAL;
+	str += len;
+
+	if (*str != '\0')
+		return -EINVAL;
+
+	*start = sval;
+	*end = eval;
 
 	return 0;
 }
-- 
2.15.1

[PATCH AUTOSEL for 4.15 159/189] cifs: silence compiler warnings showing up with gcc-8.0.0

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit ade7db991b47ab3016a414468164f4966bd08202 ]

This bug was fixed before, but came up again with the latest
compiler in another function:

fs/cifs/cifssmb.c: In function 'CIFSSMBSetEA':
fs/cifs/cifssmb.c:6362:3: error: 'strncpy' offset 8 is out of the bounds [0, 4] [-Werror=array-bounds]
   strncpy(parm_data->list[0].name, ea_name, name_len);

Let's apply the same fix that was used for the other instances.

Fixes: b2a3ad9ca502 ("cifs: silence compiler warnings showing up with gcc-4.7.0")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/cifs/cifssmb.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 35dc5bf01ee2..7fd39ea6e22e 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -6331,9 +6331,7 @@ SetEARetry:
 	pSMB->InformationLevel =
 		cpu_to_le16(SMB_SET_FILE_EA);
 
-	parm_data =
-		(struct fealist *) (((char *) &pSMB->hdr.Protocol) +
-				       offset);
+	parm_data = (void *)pSMB + offsetof(struct smb_hdr, Protocol) + offset;
 	pSMB->ParameterOffset = cpu_to_le16(param_offset);
 	pSMB->DataOffset = cpu_to_le16(offset);
 	pSMB->SetupCount = 1;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 158/189] PM / domains: Fix up domain-idle-states OF parsing

[Sasha Levin]

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit a3381e3a65cbaf612c8f584906c4dba27e84267c ]

Commit b539cc82d493 (PM / Domains: Ignore domain-idle-states that are
not compatible), made it possible to ignore non-compatible
domain-idle-states OF nodes. However, in case that happens while doing
the OF parsing, the number of elements in the allocated array would
exceed the numbers actually needed, thus wasting memory.

Fix this by pre-iterating the genpd OF node and counting the number of
compatible domain-idle-states nodes, before doing the allocation. While
doing this, it makes sense to rework the code a bit to avoid open coding,
of parts responsible for the OF node iteration.

Let's also take the opportunity to clarify the function header for
of_genpd_parse_idle_states(), about what is being returned in case of
errors.

Fixes: b539cc82d493 (PM / Domains: Ignore domain-idle-states that are not compatible)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/base/power/domain.c | 76 +++++++++++++++++++++++++++------------------
 1 file changed, 45 insertions(+), 31 deletions(-)

diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 0c80bea05bcb..69520ad6f169 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -2293,6 +2293,38 @@ static int genpd_parse_state(struct genpd_power_state *genpd_state,
 	return 0;
 }
 
+static int genpd_iterate_idle_states(struct device_node *dn,
+				     struct genpd_power_state *states)
+{
+	int ret;
+	struct of_phandle_iterator it;
+	struct device_node *np;
+	int i = 0;
+
+	ret = of_count_phandle_with_args(dn, "domain-idle-states", NULL);
+	if (ret <= 0)
+		return ret;
+
+	/* Loop over the phandles until all the requested entry is found */
+	of_for_each_phandle(&it, ret, dn, "domain-idle-states", NULL, 0) {
+		np = it.node;
+		if (!of_match_node(idle_state_match, np))
+			continue;
+		if (states) {
+			ret = genpd_parse_state(&states[i], np);
+			if (ret) {
+				pr_err("Parsing idle state node %pOF failed with err %d\n",
+				       np, ret);
+				of_node_put(np);
+				return ret;
+			}
+		}
+		i++;
+	}
+
+	return i;
+}
+
 /**
  * of_genpd_parse_idle_states: Return array of idle states for the genpd.
  *
@@ -2302,49 +2334,31 @@ static int genpd_parse_state(struct genpd_power_state *genpd_state,
  *
  * Returns the device states parsed from the OF node. The memory for the states
  * is allocated by this function and is the responsibility of the caller to
- * free the memory after use.
+ * free the memory after use. If no domain idle states is found it returns
+ * -EINVAL and in case of errors, a negative error code.
  */
 int of_genpd_parse_idle_states(struct device_node *dn,
 			struct genpd_power_state **states, int *n)
 {
 	struct genpd_power_state *st;
-	struct device_node *np;
-	int i = 0;
-	int err, ret;
-	int count;
-	struct of_phandle_iterator it;
-	const struct of_device_id *match_id;
+	int ret;
 
-	count = of_count_phandle_with_args(dn, "domain-idle-states", NULL);
-	if (count <= 0)
-		return -EINVAL;
+	ret = genpd_iterate_idle_states(dn, NULL);
+	if (ret <= 0)
+		return ret < 0 ? ret : -EINVAL;
 
-	st = kcalloc(count, sizeof(*st), GFP_KERNEL);
+	st = kcalloc(ret, sizeof(*st), GFP_KERNEL);
 	if (!st)
 		return -ENOMEM;
 
-	/* Loop over the phandles until all the requested entry is found */
-	of_for_each_phandle(&it, err, dn, "domain-idle-states", NULL, 0) {
-		np = it.node;
-		match_id = of_match_node(idle_state_match, np);
-		if (!match_id)
-			continue;
-		ret = genpd_parse_state(&st[i++], np);
-		if (ret) {
-			pr_err
-			("Parsing idle state node %pOF failed with err %d\n",
-							np, ret);
-			of_node_put(np);
-			kfree(st);
-			return ret;
-		}
+	ret = genpd_iterate_idle_states(dn, st);
+	if (ret <= 0) {
+		kfree(st);
+		return ret < 0 ? ret : -EINVAL;
 	}
 
-	*n = i;
-	if (!i)
-		kfree(st);
-	else
-		*states = st;
+	*states = st;
+	*n = ret;
 
 	return 0;
 }
-- 
2.15.1

[PATCH AUTOSEL for 4.15 160/189] bcache: properly set task state in bch_writeback_thread()

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit 99361bbf26337186f02561109c17a4c4b1a7536a ]

Kernel thread routine bch_writeback_thread() has the following code block,

447         down_write(&dc->writeback_lock);
448~450     if (check conditions) {
451                 up_write(&dc->writeback_lock);
452                 set_current_state(TASK_INTERRUPTIBLE);
453
454                 if (kthread_should_stop())
455                         return 0;
456
457                 schedule();
458                 continue;
459         }

If condition check is true, its task state is set to TASK_INTERRUPTIBLE
and call schedule() to wait for others to wake up it.

There are 2 issues in current code,
1, Task state is set to TASK_INTERRUPTIBLE after the condition checks, if
   another process changes the condition and call wake_up_process(dc->
   writeback_thread), then at line 452 task state is set back to
   TASK_INTERRUPTIBLE, the writeback kernel thread will lose a chance to be
   waken up.
2, At line 454 if kthread_should_stop() is true, writeback kernel thread
   will return to kernel/kthread.c:kthread() with TASK_INTERRUPTIBLE and
   call do_exit(). It is not good to enter do_exit() with task state
   TASK_INTERRUPTIBLE, in following code path might_sleep() is called and a
   warning message is reported by __might_sleep(): "WARNING: do not call
   blocking ops when !TASK_RUNNING; state=1 set at [xxxx]".

For the first issue, task state should be set before condition checks.
Ineed because dc->writeback_lock is required when modifying all the
conditions, calling set_current_state() inside code block where dc->
writeback_lock is hold is safe. But this is quite implicit, so I still move
set_current_state() before all the condition checks.

For the second issue, frankley speaking it does not hurt when kernel thread
exits with TASK_INTERRUPTIBLE state, but this warning message scares users,
makes them feel there might be something risky with bcache and hurt their
data.  Setting task state to TASK_RUNNING before returning fixes this
problem.

In alloc.c:allocator_wait(), there is also a similar issue, and is also
fixed in this patch.

Changelog:
v3: merge two similar fixes into one patch
v2: fix the race issue in v1 patch.
v1: initial buggy fix.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/bcache/alloc.c     | 4 +++-
 drivers/md/bcache/writeback.c | 7 +++++--
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/md/bcache/alloc.c b/drivers/md/bcache/alloc.c
index a0cc1bc6d884..aa2b657e507a 100644
--- a/drivers/md/bcache/alloc.c
+++ b/drivers/md/bcache/alloc.c
@@ -287,8 +287,10 @@ do {									\
 			break;						\
 									\
 		mutex_unlock(&(ca)->set->bucket_lock);			\
-		if (kthread_should_stop())				\
+		if (kthread_should_stop()) {				\
+			set_current_state(TASK_RUNNING);		\
 			return 0;					\
+		}							\
 									\
 		schedule();						\
 		mutex_lock(&(ca)->set->bucket_lock);			\
diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c
index 56a37884ca8b..2259f78e9434 100644
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -445,18 +445,21 @@ static int bch_writeback_thread(void *arg)
 
 	while (!kthread_should_stop()) {
 		down_write(&dc->writeback_lock);
+		set_current_state(TASK_INTERRUPTIBLE);
 		if (!atomic_read(&dc->has_dirty) ||
 		    (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) &&
 		     !dc->writeback_running)) {
 			up_write(&dc->writeback_lock);
-			set_current_state(TASK_INTERRUPTIBLE);
 
-			if (kthread_should_stop())
+			if (kthread_should_stop()) {
+				set_current_state(TASK_RUNNING);
 				return 0;
+			}
 
 			schedule();
 			continue;
 		}
+		set_current_state(TASK_RUNNING);
 
 		searched_full_index = refill_dirty(dc);
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 161/189] bcache: fix for allocator and register thread race

[Sasha Levin]

From: Tang Junhui <tang.junhui@zte.com.cn>

[ Upstream commit 682811b3ce1a5a4e20d700939a9042f01dbc66c4 ]

After long time running of random small IO writing,
I reboot the machine, and after the machine power on,
I found bcache got stuck, the stack is:
[root@ceph153 ~]# cat /proc/2510/task/*/stack
[<ffffffffa06b2455>] closure_sync+0x25/0x90 [bcache]
[<ffffffffa06b6be8>] bch_journal+0x118/0x2b0 [bcache]
[<ffffffffa06b6dc7>] bch_journal_meta+0x47/0x70 [bcache]
[<ffffffffa06be8f7>] bch_prio_write+0x237/0x340 [bcache]
[<ffffffffa06a8018>] bch_allocator_thread+0x3c8/0x3d0 [bcache]
[<ffffffff810a631f>] kthread+0xcf/0xe0
[<ffffffff8164c318>] ret_from_fork+0x58/0x90
[<ffffffffffffffff>] 0xffffffffffffffff
[root@ceph153 ~]# cat /proc/2038/task/*/stack
[<ffffffffa06b1abd>] __bch_btree_map_nodes+0x12d/0x150 [bcache]
[<ffffffffa06b1bd1>] bch_btree_insert+0xf1/0x170 [bcache]
[<ffffffffa06b637f>] bch_journal_replay+0x13f/0x230 [bcache]
[<ffffffffa06c75fe>] run_cache_set+0x79a/0x7c2 [bcache]
[<ffffffffa06c0cf8>] register_bcache+0xd48/0x1310 [bcache]
[<ffffffff812f702f>] kobj_attr_store+0xf/0x20
[<ffffffff8125b216>] sysfs_write_file+0xc6/0x140
[<ffffffff811dfbfd>] vfs_write+0xbd/0x1e0
[<ffffffff811e069f>] SyS_write+0x7f/0xe0
[<ffffffff8164c3c9>] system_call_fastpath+0x16/0x1
The stack shows the register thread and allocator thread
were getting stuck when registering cache device.

I reboot the machine several times, the issue always
exsit in this machine.

I debug the code, and found the call trace as bellow:
register_bcache()
   ==>run_cache_set()
      ==>bch_journal_replay()
         ==>bch_btree_insert()
            ==>__bch_btree_map_nodes()
               ==>btree_insert_fn()
                  ==>btree_split() //node need split
                     ==>btree_check_reserve()
In btree_check_reserve(), It will check if there is enough buckets
of RESERVE_BTREE type, since allocator thread did not work yet, so
no buckets of RESERVE_BTREE type allocated, so the register thread
waits on c->btree_cache_wait, and goes to sleep.

Then the allocator thread initialized, the call trace is bellow:
bch_allocator_thread()
==>bch_prio_write()
   ==>bch_journal_meta()
      ==>bch_journal()
         ==>journal_wait_for_write()
In journal_wait_for_write(), It will check if journal is full by
journal_full(), but the long time random small IO writing
causes the exhaustion of journal buckets(journal.blocks_free=0),
In order to release the journal buckets,
the allocator calls btree_flush_write() to flush keys to
btree nodes, and waits on c->journal.wait until btree nodes writing
over or there has already some journal buckets space, then the
allocator thread goes to sleep. but in btree_flush_write(), since
bch_journal_replay() is not finished, so no btree nodes have journal
(condition "if (btree_current_write(b)->journal)" never satisfied),
so we got no btree node to flush, no journal bucket released,
and allocator sleep all the times.

Through the above analysis, we can see that:
1) Register thread wait for allocator thread to allocate buckets of
   RESERVE_BTREE type;
2) Alloctor thread wait for register thread to replay journal, so it
   can flush btree nodes and get journal bucket.
   then they are all got stuck by waiting for each other.

Hua Rui provided a patch for me, by allocating some buckets of
RESERVE_BTREE type in advance, so the register thread can get bucket
when btree node splitting and no need to waiting for the allocator
thread. I tested it, it has effect, and register thread run a step
forward, but finally are still got stuck, the reason is only 8 bucket
of RESERVE_BTREE type were allocated, and in bch_journal_replay(),
after 2 btree nodes splitting, only 4 bucket of RESERVE_BTREE type left,
then btree_check_reserve() is not satisfied anymore, so it goes to sleep
again, and in the same time, alloctor thread did not flush enough btree
nodes to release a journal bucket, so they all got stuck again.

So we need to allocate more buckets of RESERVE_BTREE type in advance,
but how much is enough?  By experience and test, I think it should be
as much as journal buckets. Then I modify the code as this patch,
and test in the machine, and it works.

This patch modified base on Hua Rui’s patch, and allocate more buckets
of RESERVE_BTREE type in advance to avoid register thread and allocate
thread going to wait for each other.

[patch v2] ca->sb.njournal_buckets would be 0 in the first time after
cache creation, and no journal exists, so just 8 btree buckets is OK.

Signed-off-by: Hua Rui <huarui.dev@gmail.com>
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/bcache/btree.c |  9 ++++++---
 drivers/md/bcache/super.c | 13 ++++++++++++-
 2 files changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c
index 81e8dc3dbe5e..45561f28e58a 100644
--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@ -1871,14 +1871,17 @@ void bch_initial_gc_finish(struct cache_set *c)
 	 */
 	for_each_cache(ca, c, i) {
 		for_each_bucket(b, ca) {
-			if (fifo_full(&ca->free[RESERVE_PRIO]))
+			if (fifo_full(&ca->free[RESERVE_PRIO]) &&
+			    fifo_full(&ca->free[RESERVE_BTREE]))
 				break;
 
 			if (bch_can_invalidate_bucket(ca, b) &&
 			    !GC_MARK(b)) {
 				__bch_invalidate_one_bucket(ca, b);
-				fifo_push(&ca->free[RESERVE_PRIO],
-					  b - ca->buckets);
+				if (!fifo_push(&ca->free[RESERVE_PRIO],
+				   b - ca->buckets))
+					fifo_push(&ca->free[RESERVE_BTREE],
+						  b - ca->buckets);
 			}
 		}
 	}
diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 14bdaf1cef2c..a7fcc51d44e9 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1833,6 +1833,7 @@ void bch_cache_release(struct kobject *kobj)
 static int cache_alloc(struct cache *ca)
 {
 	size_t free;
+	size_t btree_buckets;
 	struct bucket *b;
 
 	__module_get(THIS_MODULE);
@@ -1840,9 +1841,19 @@ static int cache_alloc(struct cache *ca)
 
 	bio_init(&ca->journal.bio, ca->journal.bio.bi_inline_vecs, 8);
 
+	/*
+	 * when ca->sb.njournal_buckets is not zero, journal exists,
+	 * and in bch_journal_replay(), tree node may split,
+	 * so bucket of RESERVE_BTREE type is needed,
+	 * the worst situation is all journal buckets are valid journal,
+	 * and all the keys need to replay,
+	 * so the number of  RESERVE_BTREE type buckets should be as much
+	 * as journal buckets
+	 */
+	btree_buckets = ca->sb.njournal_buckets ?: 8;
 	free = roundup_pow_of_two(ca->sb.nbuckets) >> 10;
 
-	if (!init_fifo(&ca->free[RESERVE_BTREE], 8, GFP_KERNEL) ||
+	if (!init_fifo(&ca->free[RESERVE_BTREE], btree_buckets, GFP_KERNEL) ||
 	    !init_fifo_exact(&ca->free[RESERVE_PRIO], prio_buckets(ca), GFP_KERNEL) ||
 	    !init_fifo(&ca->free[RESERVE_MOVINGGC], free, GFP_KERNEL) ||
 	    !init_fifo(&ca->free[RESERVE_NONE], free, GFP_KERNEL) ||
-- 
2.15.1

[PATCH AUTOSEL for 4.15 162/189] bcache: fix for data collapse after re-attaching an attached device

[Sasha Levin]

From: Tang Junhui <tang.junhui@zte.com.cn>

[ Upstream commit 73ac105be390c1de42a2f21643c9778a5e002930 ]

back-end device sdm has already attached a cache_set with ID
f67ebe1f-f8bc-4d73-bfe5-9dc88607f119, then try to attach with
another cache set, and it returns with an error:
[root]# cd /sys/block/sdm/bcache
[root]# echo 5ccd0a63-148e-48b8-afa2-aca9cbd6279f > attach
-bash: echo: write error: Invalid argument

After that, execute a command to modify the label of bcache
device:
[root]# echo data_disk1 > label

Then we reboot the system, when the system power on, the back-end
device can not attach to cache_set, a messages show in the log:
Feb  5 12:05:52 ceph152 kernel: [922385.508498] bcache:
bch_cached_dev_attach() couldn't find uuid for sdm in set

In sysfs_attach(), dc->sb.set_uuid was assigned to the value
which input through sysfs, no matter whether it is success
or not in bch_cached_dev_attach(). For example, If the back-end
device has already attached to an cache set, bch_cached_dev_attach()
would fail, but dc->sb.set_uuid was changed. Then modify the
label of bcache device, it will call bch_write_bdev_super(),
which would write the dc->sb.set_uuid to the super block, so we
record a wrong cache set ID in the super block, after the system
reboot, the cache set couldn't find the uuid of the back-end
device, so the bcache device couldn't exist and use any more.

In this patch, we don't assigned cache set ID to dc->sb.set_uuid
in sysfs_attach() directly, but input it into bch_cached_dev_attach(),
and assigned dc->sb.set_uuid to the cache set ID after the back-end
device attached to the cache set successful.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/bcache/bcache.h |  2 +-
 drivers/md/bcache/super.c  | 10 ++++++----
 drivers/md/bcache/sysfs.c  |  6 ++++--
 3 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h
index 843877e017e1..40f02679f176 100644
--- a/drivers/md/bcache/bcache.h
+++ b/drivers/md/bcache/bcache.h
@@ -907,7 +907,7 @@ void bcache_write_super(struct cache_set *);
 
 int bch_flash_dev_create(struct cache_set *c, uint64_t size);
 
-int bch_cached_dev_attach(struct cached_dev *, struct cache_set *);
+int bch_cached_dev_attach(struct cached_dev *, struct cache_set *, uint8_t *);
 void bch_cached_dev_detach(struct cached_dev *);
 void bch_cached_dev_run(struct cached_dev *);
 void bcache_device_stop(struct bcache_device *);
diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index a7fcc51d44e9..d43ac7ceb90c 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -946,7 +946,8 @@ void bch_cached_dev_detach(struct cached_dev *dc)
 	cached_dev_put(dc);
 }
 
-int bch_cached_dev_attach(struct cached_dev *dc, struct cache_set *c)
+int bch_cached_dev_attach(struct cached_dev *dc, struct cache_set *c,
+			  uint8_t *set_uuid)
 {
 	uint32_t rtime = cpu_to_le32(get_seconds());
 	struct uuid_entry *u;
@@ -955,7 +956,8 @@ int bch_cached_dev_attach(struct cached_dev *dc, struct cache_set *c)
 
 	bdevname(dc->bdev, buf);
 
-	if (memcmp(dc->sb.set_uuid, c->sb.set_uuid, 16))
+	if ((set_uuid && memcmp(set_uuid, c->sb.set_uuid, 16)) ||
+	    (!set_uuid && memcmp(dc->sb.set_uuid, c->sb.set_uuid, 16)))
 		return -ENOENT;
 
 	if (dc->disk.c) {
@@ -1194,7 +1196,7 @@ static void register_bdev(struct cache_sb *sb, struct page *sb_page,
 
 	list_add(&dc->list, &uncached_devices);
 	list_for_each_entry(c, &bch_cache_sets, list)
-		bch_cached_dev_attach(dc, c);
+		bch_cached_dev_attach(dc, c, NULL);
 
 	if (BDEV_STATE(&dc->sb) == BDEV_STATE_NONE ||
 	    BDEV_STATE(&dc->sb) == BDEV_STATE_STALE)
@@ -1716,7 +1718,7 @@ static void run_cache_set(struct cache_set *c)
 	bcache_write_super(c);
 
 	list_for_each_entry_safe(dc, t, &uncached_devices, list)
-		bch_cached_dev_attach(dc, c);
+		bch_cached_dev_attach(dc, c, NULL);
 
 	flash_devs_run(c);
 
diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index b4184092c727..c54028b92bc0 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -267,11 +267,13 @@ STORE(__cached_dev)
 	}
 
 	if (attr == &sysfs_attach) {
-		if (bch_parse_uuid(buf, dc->sb.set_uuid) < 16)
+		uint8_t		set_uuid[16];
+
+		if (bch_parse_uuid(buf, set_uuid) < 16)
 			return -EINVAL;
 
 		list_for_each_entry(c, &bch_cache_sets, list) {
-			v = bch_cached_dev_attach(dc, c);
+			v = bch_cached_dev_attach(dc, c, set_uuid);
 			if (!v)
 				return size;
 		}
-- 
2.15.1

[PATCH AUTOSEL for 4.15 163/189] bcache: return attach error when no cache set exist

[Sasha Levin]

From: Tang Junhui <tang.junhui@zte.com.cn>

[ Upstream commit 7f4fc93d4713394ee8f1cd44c238e046e11b4f15 ]

I attach a back-end device to a cache set, and the cache set is not
registered yet, this back-end device did not attach successfully, and no
error returned:
[root]# echo 87859280-fec6-4bcc-20df7ca8f86b > /sys/block/sde/bcache/attach
[root]#

In sysfs_attach(), the return value "v" is initialized to "size" in
the beginning, and if no cache set exist in bch_cache_sets, the "v" value
would not change any more, and return to sysfs, sysfs regard it as success
since the "size" is a positive number.

This patch fixes this issue by assigning "v" with "-ENOENT" in the
initialization.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/bcache/sysfs.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index c54028b92bc0..6316399aa230 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -195,7 +195,7 @@ STORE(__cached_dev)
 {
 	struct cached_dev *dc = container_of(kobj, struct cached_dev,
 					     disk.kobj);
-	ssize_t v = size;
+	ssize_t v;
 	struct cache_set *c;
 	struct kobj_uevent_env *env;
 
@@ -272,6 +272,7 @@ STORE(__cached_dev)
 		if (bch_parse_uuid(buf, set_uuid) < 16)
 			return -EINVAL;
 
+		v = -ENOENT;
 		list_for_each_entry(c, &bch_cache_sets, list) {
 			v = bch_cached_dev_attach(dc, c, set_uuid);
 			if (!v)
@@ -279,7 +280,7 @@ STORE(__cached_dev)
 		}
 
 		pr_err("Can't attach %s: cache set not found", buf);
-		size = v;
+		return v;
 	}
 
 	if (attr == &sysfs_detach && dc->disk.c)
-- 
2.15.1

[PATCH AUTOSEL for 4.15 164/189] rxrpc: Fix received abort handling

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 17e9e23b130e4e269fa53c2370325249f3ba75dd ]

AF_RXRPC is incorrectly sending back to the server any abort it receives
for a client connection.  This is due to the final-ACK offload to the
connection event processor patch.  The abort code is copied into the
last-call information on the connection channel and then the event
processor is set.

Instead, the following should be done:

 (1) In the case of a final-ACK for a successful call, the ACK should be
     scheduled as before.

 (2) In the case of a locally generated ABORT, the ABORT details should be
     cached for sending in response to further packets related to that
     call and no further action scheduled at call disconnect time.

 (3) In the case of an ACK received from the peer, the call should be
     considered dead, no ABORT should be transmitted at this time.  In
     response to further non-ABORT packets from the peer relating to this
     call, an RX_USER_ABORT ABORT should be transmitted.

 (4) In the case of a call killed due to network error, an RX_USER_ABORT
     ABORT should be cached for transmission in response to further
     packets, but no ABORT should be sent at this time.

Fixes: 3136ef49a14c ("rxrpc: Delay terminal ACK transmission on a client call")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/rxrpc/conn_client.c |  3 ++-
 net/rxrpc/conn_object.c | 16 ++++++++++++----
 2 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/net/rxrpc/conn_client.c b/net/rxrpc/conn_client.c
index 7f74ca3059f8..064175068059 100644
--- a/net/rxrpc/conn_client.c
+++ b/net/rxrpc/conn_client.c
@@ -834,7 +834,8 @@ void rxrpc_disconnect_client_call(struct rxrpc_call *call)
 	 * can be skipped if we find a follow-on call.  The first DATA packet
 	 * of the follow on call will implicitly ACK this call.
 	 */
-	if (test_bit(RXRPC_CALL_EXPOSED, &call->flags)) {
+	if (call->completion == RXRPC_CALL_SUCCEEDED &&
+	    test_bit(RXRPC_CALL_EXPOSED, &call->flags)) {
 		unsigned long final_ack_at = jiffies + 2;
 
 		WRITE_ONCE(chan->final_ack_at, final_ack_at);
diff --git a/net/rxrpc/conn_object.c b/net/rxrpc/conn_object.c
index c628351eb900..ccbac190add1 100644
--- a/net/rxrpc/conn_object.c
+++ b/net/rxrpc/conn_object.c
@@ -177,13 +177,21 @@ void __rxrpc_disconnect_call(struct rxrpc_connection *conn,
 		 * through the channel, whilst disposing of the actual call record.
 		 */
 		trace_rxrpc_disconnect_call(call);
-		if (call->abort_code) {
-			chan->last_abort = call->abort_code;
-			chan->last_type = RXRPC_PACKET_TYPE_ABORT;
-		} else {
+		switch (call->completion) {
+		case RXRPC_CALL_SUCCEEDED:
 			chan->last_seq = call->rx_hard_ack;
 			chan->last_type = RXRPC_PACKET_TYPE_ACK;
+			break;
+		case RXRPC_CALL_LOCALLY_ABORTED:
+			chan->last_abort = call->abort_code;
+			chan->last_type = RXRPC_PACKET_TYPE_ABORT;
+			break;
+		default:
+			chan->last_abort = RX_USER_ABORT;
+			chan->last_type = RXRPC_PACKET_TYPE_ABORT;
+			break;
 		}
+
 		/* Sync with rxrpc_conn_retransmit(). */
 		smp_wmb();
 		chan->last_call = chan->call_id;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 165/189] sch_netem: Bug fixing in calculating Netem interval

[Sasha Levin]

From: "Md. Islam" <mislam4@kent.edu>

[ Upstream commit 043e337f555e610ad8237fd23522d97c968d72b9 ]

In Kernel 4.15.0+, Netem does not work properly.

Netem setup:

tc qdisc add dev h1-eth0 root handle 1: netem delay 10ms 2ms

Result:

PING 172.16.101.2 (172.16.101.2) 56(84) bytes of data.
64 bytes from 172.16.101.2: icmp_seq=1 ttl=64 time=22.8 ms
64 bytes from 172.16.101.2: icmp_seq=2 ttl=64 time=10.9 ms
64 bytes from 172.16.101.2: icmp_seq=3 ttl=64 time=10.9 ms
64 bytes from 172.16.101.2: icmp_seq=5 ttl=64 time=11.4 ms
64 bytes from 172.16.101.2: icmp_seq=6 ttl=64 time=11.8 ms
64 bytes from 172.16.101.2: icmp_seq=4 ttl=64 time=4303 ms
64 bytes from 172.16.101.2: icmp_seq=10 ttl=64 time=11.2 ms
64 bytes from 172.16.101.2: icmp_seq=11 ttl=64 time=10.3 ms
64 bytes from 172.16.101.2: icmp_seq=7 ttl=64 time=4304 ms
64 bytes from 172.16.101.2: icmp_seq=8 ttl=64 time=4303 ms

Patch:

(rnd % (2 * sigma)) - sigma was overflowing s32. After applying the
patch, I found following output which is desirable.

PING 172.16.101.2 (172.16.101.2) 56(84) bytes of data.
64 bytes from 172.16.101.2: icmp_seq=1 ttl=64 time=21.1 ms
64 bytes from 172.16.101.2: icmp_seq=2 ttl=64 time=8.46 ms
64 bytes from 172.16.101.2: icmp_seq=3 ttl=64 time=9.00 ms
64 bytes from 172.16.101.2: icmp_seq=4 ttl=64 time=11.8 ms
64 bytes from 172.16.101.2: icmp_seq=5 ttl=64 time=8.36 ms
64 bytes from 172.16.101.2: icmp_seq=6 ttl=64 time=11.8 ms
64 bytes from 172.16.101.2: icmp_seq=7 ttl=64 time=8.11 ms
64 bytes from 172.16.101.2: icmp_seq=8 ttl=64 time=10.0 ms
64 bytes from 172.16.101.2: icmp_seq=9 ttl=64 time=11.3 ms
64 bytes from 172.16.101.2: icmp_seq=10 ttl=64 time=11.5 ms
64 bytes from 172.16.101.2: icmp_seq=11 ttl=64 time=10.2 ms

Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/sched/sch_netem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index 2aeca57f9bd0..73c4bea821cb 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -327,7 +327,7 @@ static s64 tabledist(s64 mu, s32 sigma,
 
 	/* default uniform distribution */
 	if (dist == NULL)
-		return (rnd % (2 * sigma)) - sigma + mu;
+		return ((rnd % (2 * sigma)) + mu) - sigma;
 
 	t = dist->table[rnd % dist->size];
 	x = (sigma % NETEM_DIST_SCALE) * t;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 166/189] cpufreq: intel_pstate: Enable HWP during system resume on CPU0

[Sasha Levin]

From: Chen Yu <yu.c.chen@intel.com>

[ Upstream commit 70f6bf2a3b7e40c3f802b0ea837762a8bc6c1430 ]

When maxcpus=1 is in the kernel command line, the BP is responsible
for re-enabling the HWP - because currently only the APs invoke
intel_pstate_hwp_enable() during their online process - which might
put the system into unstable state after resume.

Fix this by enabling the HWP explicitly on BP during resume.

Reported-by: Doug Smythies <dsmythies@telus.net>
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Yu Chen <yu.c.chen@intel.com>
[ rjw: Subject/changelog, minor modifications ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/cpufreq/intel_pstate.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 93a0e88bef76..20226d4243f2 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -779,6 +779,8 @@ static int intel_pstate_hwp_save_state(struct cpufreq_policy *policy)
 	return 0;
 }
 
+static void intel_pstate_hwp_enable(struct cpudata *cpudata);
+
 static int intel_pstate_resume(struct cpufreq_policy *policy)
 {
 	if (!hwp_active)
@@ -786,6 +788,9 @@ static int intel_pstate_resume(struct cpufreq_policy *policy)
 
 	mutex_lock(&intel_pstate_limits_lock);
 
+	if (policy->cpu == 0)
+		intel_pstate_hwp_enable(all_cpu_data[policy->cpu]);
+
 	all_cpu_data[policy->cpu]->epp_policy = 0;
 	intel_pstate_hwp_set(policy->cpu);
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 167/189] selftests/ftrace: Add some missing glob checks

[Sasha Levin]

From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>

[ Upstream commit 97fe22adf33f06519bfdf7dad33bcd562e366c8f ]

Al Viro discovered a bug in the glob ftrace filtering code where "*a*b" is
treated the same as "a*b", and functions that would be selected by "*a*b"
but not "a*b" are not selected with "*a*b".

Add tests for patterns "*a*b" and "a*b*" to the glob selftest.

Link: http://lkml.kernel.org/r/20180127170748.GF13338@ZenIV.linux.org.uk

Cc: Shuah Khan <shuah@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/testing/selftests/ftrace/test.d/ftrace/func-filter-glob.tc | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-glob.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-glob.tc
index 589d52b211b7..27a54a17da65 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-glob.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-glob.tc
@@ -29,6 +29,12 @@ ftrace_filter_check '*schedule*' '^.*schedule.*$'
 # filter by *, end match
 ftrace_filter_check 'schedule*' '^schedule.*$'
 
+# filter by *mid*end
+ftrace_filter_check '*aw*lock' '.*aw.*lock$'
+
+# filter by start*mid*
+ftrace_filter_check 'mutex*try*' '^mutex.*try.*'
+
 # Advanced full-glob matching feature is recently supported.
 # Skip the tests if we are sure the kernel does not support it.
 if grep -q 'accepts: .* glob-matching-pattern' README ; then
-- 
2.15.1

[PATCH AUTOSEL for 4.15 168/189] nfsd: return RESOURCE not GARBAGE_ARGS on too many ops

[Sasha Levin]

From: "J. Bruce Fields" <bfields@redhat.com>

[ Upstream commit 0078117c6d9160031b866cfa1853514d4f6865d2 ]

A client that sends more than a hundred ops in a single compound
currently gets an rpc-level GARBAGE_ARGS error.

It would be more helpful to return NFS4ERR_RESOURCE, since that gives
the client a better idea how to recover (for example by splitting up the
compound into smaller compounds).

This is all a bit academic since we've never actually seen a reason for
clients to send such long compounds, but we may as well fix it.

While we're there, just use NFSD4_MAX_OPS_PER_COMPOUND == 16, the
constant we already use in the 4.1 case, instead of hard-coding 100.
Chances anyone actually uses even 16 ops per compound are small enough
that I think there's a neglible risk or any regression.

This fixes pynfs test COMP6.

Reported-by: "Lu, Xinyu" <luxy.fnst@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/nfsd/nfs4proc.c | 3 +++
 fs/nfsd/nfs4xdr.c  | 9 +++++++--
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index effeeb4f556f..a0bed2b2004d 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1703,6 +1703,9 @@ nfsd4_proc_compound(struct svc_rqst *rqstp)
 	status = nfserr_minor_vers_mismatch;
 	if (nfsd_minorversion(args->minorversion, NFSD_TEST) <= 0)
 		goto out;
+	status = nfserr_resource;
+	if (args->opcnt > NFSD_MAX_OPS_PER_COMPOUND)
+		goto out;
 
 	status = nfs41_check_op_ordering(args);
 	if (status) {
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 2c61c6b8ae09..5dcd7cb45b2d 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -1918,8 +1918,13 @@ nfsd4_decode_compound(struct nfsd4_compoundargs *argp)
 
 	if (argp->taglen > NFSD4_MAX_TAGLEN)
 		goto xdr_error;
-	if (argp->opcnt > 100)
-		goto xdr_error;
+	/*
+	 * NFS4ERR_RESOURCE is a more helpful error than GARBAGE_ARGS
+	 * here, so we return success at the xdr level so that
+	 * nfsd4_proc can handle this is an NFS-level error.
+	 */
+	if (argp->opcnt > NFSD_MAX_OPS_PER_COMPOUND)
+		return 0;
 
 	if (argp->opcnt > ARRAY_SIZE(argp->iops)) {
 		argp->ops = kzalloc(argp->opcnt * sizeof(*argp->ops), GFP_KERNEL);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 169/189] rxrpc: Don't put crypto buffers on the stack

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 8c2f826dc36314059ac146c78d3bf8056b626446 ]

Don't put buffers of data to be handed to crypto on the stack as this may
cause an assertion failure in the kernel (see below).  Fix this by using an
kmalloc'd buffer instead.

kernel BUG at ./include/linux/scatterlist.h:147!
...
RIP: 0010:rxkad_encrypt_response.isra.6+0x191/0x1b0 [rxrpc]
RSP: 0018:ffffbe2fc06cfca8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff989277d59900 RCX: 0000000000000028
RDX: 0000259dc06cfd88 RSI: 0000000000000025 RDI: ffffbe30406cfd88
RBP: ffffbe2fc06cfd60 R08: ffffbe2fc06cfd08 R09: ffffbe2fc06cfd08
R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff7c5f80d9f95
R13: ffffbe2fc06cfd88 R14: ffff98927a3f7aa0 R15: ffffbe2fc06cfd08
FS:  0000000000000000(0000) GS:ffff98927fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b1ff28f0f8 CR3: 000000001b412003 CR4: 00000000003606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 rxkad_respond_to_challenge+0x297/0x330 [rxrpc]
 rxrpc_process_connection+0xd1/0x690 [rxrpc]
 ? process_one_work+0x1c3/0x680
 ? __lock_is_held+0x59/0xa0
 process_one_work+0x249/0x680
 worker_thread+0x3a/0x390
 ? process_one_work+0x680/0x680
 kthread+0x121/0x140
 ? kthread_create_worker_on_cpu+0x70/0x70
 ret_from_fork+0x3a/0x50

Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/rxrpc/conn_event.c |  1 +
 net/rxrpc/rxkad.c      | 92 ++++++++++++++++++++++++++++----------------------
 2 files changed, 52 insertions(+), 41 deletions(-)

diff --git a/net/rxrpc/conn_event.c b/net/rxrpc/conn_event.c
index 4ca11be6be3c..b1dfae107431 100644
--- a/net/rxrpc/conn_event.c
+++ b/net/rxrpc/conn_event.c
@@ -460,6 +460,7 @@ void rxrpc_process_connection(struct work_struct *work)
 		case -EKEYEXPIRED:
 		case -EKEYREJECTED:
 			goto protocol_error;
+		case -ENOMEM:
 		case -EAGAIN:
 			goto requeue_and_leave;
 		case -ECONNABORTED:
diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c
index c38b3a1de56c..77cb23c7bd0a 100644
--- a/net/rxrpc/rxkad.c
+++ b/net/rxrpc/rxkad.c
@@ -773,8 +773,7 @@ static int rxkad_respond_to_challenge(struct rxrpc_connection *conn,
 {
 	const struct rxrpc_key_token *token;
 	struct rxkad_challenge challenge;
-	struct rxkad_response resp
-		__attribute__((aligned(8))); /* must be aligned for crypto */
+	struct rxkad_response *resp;
 	struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
 	const char *eproto;
 	u32 version, nonce, min_level, abort_code;
@@ -818,26 +817,29 @@ static int rxkad_respond_to_challenge(struct rxrpc_connection *conn,
 	token = conn->params.key->payload.data[0];
 
 	/* build the response packet */
-	memset(&resp, 0, sizeof(resp));
-
-	resp.version			= htonl(RXKAD_VERSION);
-	resp.encrypted.epoch		= htonl(conn->proto.epoch);
-	resp.encrypted.cid		= htonl(conn->proto.cid);
-	resp.encrypted.securityIndex	= htonl(conn->security_ix);
-	resp.encrypted.inc_nonce	= htonl(nonce + 1);
-	resp.encrypted.level		= htonl(conn->params.security_level);
-	resp.kvno			= htonl(token->kad->kvno);
-	resp.ticket_len			= htonl(token->kad->ticket_len);
-
-	resp.encrypted.call_id[0] = htonl(conn->channels[0].call_counter);
-	resp.encrypted.call_id[1] = htonl(conn->channels[1].call_counter);
-	resp.encrypted.call_id[2] = htonl(conn->channels[2].call_counter);
-	resp.encrypted.call_id[3] = htonl(conn->channels[3].call_counter);
+	resp = kzalloc(sizeof(struct rxkad_response), GFP_NOFS);
+	if (!resp)
+		return -ENOMEM;
+
+	resp->version			= htonl(RXKAD_VERSION);
+	resp->encrypted.epoch		= htonl(conn->proto.epoch);
+	resp->encrypted.cid		= htonl(conn->proto.cid);
+	resp->encrypted.securityIndex	= htonl(conn->security_ix);
+	resp->encrypted.inc_nonce	= htonl(nonce + 1);
+	resp->encrypted.level		= htonl(conn->params.security_level);
+	resp->kvno			= htonl(token->kad->kvno);
+	resp->ticket_len		= htonl(token->kad->ticket_len);
+	resp->encrypted.call_id[0]	= htonl(conn->channels[0].call_counter);
+	resp->encrypted.call_id[1]	= htonl(conn->channels[1].call_counter);
+	resp->encrypted.call_id[2]	= htonl(conn->channels[2].call_counter);
+	resp->encrypted.call_id[3]	= htonl(conn->channels[3].call_counter);
 
 	/* calculate the response checksum and then do the encryption */
-	rxkad_calc_response_checksum(&resp);
-	rxkad_encrypt_response(conn, &resp, token->kad);
-	return rxkad_send_response(conn, &sp->hdr, &resp, token->kad);
+	rxkad_calc_response_checksum(resp);
+	rxkad_encrypt_response(conn, resp, token->kad);
+	ret = rxkad_send_response(conn, &sp->hdr, resp, token->kad);
+	kfree(resp);
+	return ret;
 
 protocol_error:
 	trace_rxrpc_rx_eproto(NULL, sp->hdr.serial, eproto);
@@ -1048,8 +1050,7 @@ static int rxkad_verify_response(struct rxrpc_connection *conn,
 				 struct sk_buff *skb,
 				 u32 *_abort_code)
 {
-	struct rxkad_response response
-		__attribute__((aligned(8))); /* must be aligned for crypto */
+	struct rxkad_response *response;
 	struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
 	struct rxrpc_crypt session_key;
 	const char *eproto;
@@ -1061,17 +1062,22 @@ static int rxkad_verify_response(struct rxrpc_connection *conn,
 
 	_enter("{%d,%x}", conn->debug_id, key_serial(conn->server_key));
 
+	ret = -ENOMEM;
+	response = kzalloc(sizeof(struct rxkad_response), GFP_NOFS);
+	if (!response)
+		goto temporary_error;
+
 	eproto = tracepoint_string("rxkad_rsp_short");
 	abort_code = RXKADPACKETSHORT;
 	if (skb_copy_bits(skb, sizeof(struct rxrpc_wire_header),
-			  &response, sizeof(response)) < 0)
+			  response, sizeof(*response)) < 0)
 		goto protocol_error;
-	if (!pskb_pull(skb, sizeof(response)))
+	if (!pskb_pull(skb, sizeof(*response)))
 		BUG();
 
-	version = ntohl(response.version);
-	ticket_len = ntohl(response.ticket_len);
-	kvno = ntohl(response.kvno);
+	version = ntohl(response->version);
+	ticket_len = ntohl(response->ticket_len);
+	kvno = ntohl(response->kvno);
 	_proto("Rx RESPONSE %%%u { v=%u kv=%u tl=%u }",
 	       sp->hdr.serial, version, kvno, ticket_len);
 
@@ -1105,31 +1111,31 @@ static int rxkad_verify_response(struct rxrpc_connection *conn,
 	ret = rxkad_decrypt_ticket(conn, skb, ticket, ticket_len, &session_key,
 				   &expiry, _abort_code);
 	if (ret < 0)
-		goto temporary_error_free;
+		goto temporary_error_free_resp;
 
 	/* use the session key from inside the ticket to decrypt the
 	 * response */
-	rxkad_decrypt_response(conn, &response, &session_key);
+	rxkad_decrypt_response(conn, response, &session_key);
 
 	eproto = tracepoint_string("rxkad_rsp_param");
 	abort_code = RXKADSEALEDINCON;
-	if (ntohl(response.encrypted.epoch) != conn->proto.epoch)
+	if (ntohl(response->encrypted.epoch) != conn->proto.epoch)
 		goto protocol_error_free;
-	if (ntohl(response.encrypted.cid) != conn->proto.cid)
+	if (ntohl(response->encrypted.cid) != conn->proto.cid)
 		goto protocol_error_free;
-	if (ntohl(response.encrypted.securityIndex) != conn->security_ix)
+	if (ntohl(response->encrypted.securityIndex) != conn->security_ix)
 		goto protocol_error_free;
-	csum = response.encrypted.checksum;
-	response.encrypted.checksum = 0;
-	rxkad_calc_response_checksum(&response);
+	csum = response->encrypted.checksum;
+	response->encrypted.checksum = 0;
+	rxkad_calc_response_checksum(response);
 	eproto = tracepoint_string("rxkad_rsp_csum");
-	if (response.encrypted.checksum != csum)
+	if (response->encrypted.checksum != csum)
 		goto protocol_error_free;
 
 	spin_lock(&conn->channel_lock);
 	for (i = 0; i < RXRPC_MAXCALLS; i++) {
 		struct rxrpc_call *call;
-		u32 call_id = ntohl(response.encrypted.call_id[i]);
+		u32 call_id = ntohl(response->encrypted.call_id[i]);
 
 		eproto = tracepoint_string("rxkad_rsp_callid");
 		if (call_id > INT_MAX)
@@ -1153,12 +1159,12 @@ static int rxkad_verify_response(struct rxrpc_connection *conn,
 
 	eproto = tracepoint_string("rxkad_rsp_seq");
 	abort_code = RXKADOUTOFSEQUENCE;
-	if (ntohl(response.encrypted.inc_nonce) != conn->security_nonce + 1)
+	if (ntohl(response->encrypted.inc_nonce) != conn->security_nonce + 1)
 		goto protocol_error_free;
 
 	eproto = tracepoint_string("rxkad_rsp_level");
 	abort_code = RXKADLEVELFAIL;
-	level = ntohl(response.encrypted.level);
+	level = ntohl(response->encrypted.level);
 	if (level > RXRPC_SECURITY_ENCRYPT)
 		goto protocol_error_free;
 	conn->params.security_level = level;
@@ -1168,9 +1174,10 @@ static int rxkad_verify_response(struct rxrpc_connection *conn,
 	 * as for a client connection */
 	ret = rxrpc_get_server_data_key(conn, &session_key, expiry, kvno);
 	if (ret < 0)
-		goto temporary_error_free;
+		goto temporary_error_free_ticket;
 
 	kfree(ticket);
+	kfree(response);
 	_leave(" = 0");
 	return 0;
 
@@ -1179,12 +1186,15 @@ protocol_error_unlock:
 protocol_error_free:
 	kfree(ticket);
 protocol_error:
+	kfree(response);
 	trace_rxrpc_rx_eproto(NULL, sp->hdr.serial, eproto);
 	*_abort_code = abort_code;
 	return -EPROTO;
 
-temporary_error_free:
+temporary_error_free_ticket:
 	kfree(ticket);
+temporary_error_free_resp:
+	kfree(response);
 temporary_error:
 	/* Ignore the response packet if we got a temporary error such as
 	 * ENOMEM.  We just want to send the challenge again.  Note that we
-- 
2.15.1

[PATCH AUTOSEL for 4.15 170/189] svcrdma: Fix Read chunk round-up

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 175e03101d36c3034f3c80038d4c28838351a7f2 ]

A single NFSv4 WRITE compound can often have three operations:
PUTFH, WRITE, then GETATTR.

When the WRITE payload is sent in a Read chunk, the client places
the GETATTR in the inline part of the RPC/RDMA message, just after
the WRITE operation (sans payload). The position value in the Read
chunk enables the receiver to insert the Read chunk at the correct
place in the received XDR stream; that is between the WRITE and
GETATTR.

According to RFC 8166, an NFS/RDMA client does not have to add XDR
round-up to the Read chunk that carries the WRITE payload. The
receiver adds XDR round-up padding if it is absent and the
receiver's XDR decoder requires it to be present.

Commit 193bcb7b3719 ("svcrdma: Populate tail iovec when receiving")
attempted to add support for receiving such a compound so that just
the WRITE payload appears in rq_arg's page list, and the trailing
GETATTR is placed in rq_arg's tail iovec. (TCP just strings the
whole compound into the head iovec and page list, without regard
to the alignment of the WRITE payload).

The server transport logic also had to accommodate the optional XDR
round-up of the Read chunk, which it did simply by lengthening the
tail iovec when round-up was needed. This approach is adequate for
the NFSv2 and NFSv3 WRITE decoders.

Unfortunately it is not sufficient for nfsd4_decode_write. When the
Read chunk length is a couple of bytes less than PAGE_SIZE, the
computation at the end of nfsd4_decode_write allows argp->pagelen to
go negative, which breaks the logic in read_buf that looks for the
tail iovec.

The result is that a WRITE operation whose payload length is just
less than a multiple of a page succeeds, but the subsequent GETATTR
in the same compound fails with NFS4ERR_OP_ILLEGAL because the XDR
decoder can't find it. Clients ignore the error, but they must
update their attribute cache via a separate round trip.

As nfsd4_decode_write appears to expect the payload itself to always
have appropriate XDR round-up, have svc_rdma_build_normal_read_chunk
add the Read chunk XDR round-up to the page_len rather than
lengthening the tail iovec.

Reported-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: 193bcb7b3719 ("svcrdma: Populate tail iovec when receiving")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/sunrpc/xprtrdma/svc_rdma_rw.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/net/sunrpc/xprtrdma/svc_rdma_rw.c b/net/sunrpc/xprtrdma/svc_rdma_rw.c
index 9bd04549a1ad..12b9a7e0b6d2 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_rw.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_rw.c
@@ -727,12 +727,16 @@ static int svc_rdma_build_normal_read_chunk(struct svc_rqst *rqstp,
 		head->arg.head[0].iov_len - info->ri_position;
 	head->arg.head[0].iov_len = info->ri_position;
 
-	/* Read chunk may need XDR roundup (see RFC 5666, s. 3.7).
+	/* Read chunk may need XDR roundup (see RFC 8166, s. 3.4.5.2).
 	 *
-	 * NFSv2/3 write decoders need the length of the tail to
-	 * contain the size of the roundup padding.
+	 * If the client already rounded up the chunk length, the
+	 * length does not change. Otherwise, the length of the page
+	 * list is increased to include XDR round-up.
+	 *
+	 * Currently these chunks always start at page offset 0,
+	 * thus the rounded-up length never crosses a page boundary.
 	 */
-	head->arg.tail[0].iov_len += 4 - (info->ri_chunklen & 3);
+	info->ri_chunklen = XDR_QUADLEN(info->ri_chunklen) << 2;
 
 	head->arg.page_len = info->ri_chunklen;
 	head->arg.len += info->ri_chunklen;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 171/189] net: Extra '_get' in declaration of arch_get_platform_mac_address

[Sasha Levin]

From: Mathieu Malaterre <malat@debian.org>

[ Upstream commit e728789c52afccc1275cba1dd812f03abe16ea3c ]

In commit c7f5d105495a ("net: Add eth_platform_get_mac_address() helper."),
two declarations were added:

  int eth_platform_get_mac_address(struct device *dev, u8 *mac_addr);
  unsigned char *arch_get_platform_get_mac_address(void);

An extra '_get' was introduced in arch_get_platform_get_mac_address, remove
it. Fix compile warning using W=1:

  CC      net/ethernet/eth.o
net/ethernet/eth.c:523:24: warning: no previous prototype for ‘arch_get_platform_mac_address’ [-Wmissing-prototypes]
 unsigned char * __weak arch_get_platform_mac_address(void)
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  AR      net/ethernet/built-in.o

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/linux/etherdevice.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 263dbcad22fc..79563840c295 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -31,7 +31,7 @@
 #ifdef __KERNEL__
 struct device;
 int eth_platform_get_mac_address(struct device *dev, u8 *mac_addr);
-unsigned char *arch_get_platform_get_mac_address(void);
+unsigned char *arch_get_platform_mac_address(void);
 u32 eth_get_headlen(void *data, unsigned int max_len);
 __be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev);
 extern const struct header_ops eth_header_ops;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 172/189] tipc: fix skb truesize/datasize ratio control

[Sasha Levin]

From: Hoang Le <hoang.h.le@dektek.com.au>

[ Upstream commit 55b3280d1e471795c08dbbe17325720a843e104c ]

In commit d618d09a68e4 ("tipc: enforce valid ratio between skb truesize
and contents") we introduced a test for ensuring that the condition
truesize/datasize <= 4 is true for a received buffer. Unfortunately this
test has two problems.

- Because of the integer arithmetics the test
  if (skb->truesize / buf_roundup_len(skb) > 4) will miss all
  ratios [4 < ratio < 5], which was not the intention.
- The buffer returned by skb_copy() inherits skb->truesize of the
  original buffer, which doesn't help the situation at all.

In this commit, we change the ratio condition and replace skb_copy()
with a call to skb_copy_expand() to finally get this right.

Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/tipc/msg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/tipc/msg.c b/net/tipc/msg.c
index b0d07b35909d..fb8dda66db6d 100644
--- a/net/tipc/msg.c
+++ b/net/tipc/msg.c
@@ -208,8 +208,8 @@ bool tipc_msg_validate(struct sk_buff **_skb)
 	int msz, hsz;
 
 	/* Ensure that flow control ratio condition is satisfied */
-	if (unlikely(skb->truesize / buf_roundup_len(skb) > 4)) {
-		skb = skb_copy(skb, GFP_ATOMIC);
+	if (unlikely(skb->truesize / buf_roundup_len(skb) >= 4)) {
+		skb = skb_copy_expand(skb, BUF_HEADROOM, 0, GFP_ATOMIC);
 		if (!skb)
 			return false;
 		kfree_skb(*_skb);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 173/189] tools/libbpf: handle issues with bpf ELF objects containing .eh_frames

[Sasha Levin]

From: Jesper Dangaard Brouer <brouer@redhat.com>

[ Upstream commit e3d91b0ca523d53158f435a3e13df7f0cb360ea2 ]

V3: More generic skipping of relo-section (suggested by Daniel)

If clang >= 4.0.1 is missing the option '-target bpf', it will cause
llc/llvm to create two ELF sections for "Exception Frames", with
section names '.eh_frame' and '.rel.eh_frame'.

The BPF ELF loader library libbpf fails when loading files with these
sections.  The other in-kernel BPF ELF loader in samples/bpf/bpf_load.c,
handle this gracefully. And iproute2 loader also seems to work with these
"eh" sections.

The issue in libbpf is caused by bpf_object__elf_collect() skipping
some sections, and later when performing relocation it will be
pointing to a skipped section, as these sections cannot be found by
bpf_object__find_prog_by_idx() in bpf_object__collect_reloc().

This is a general issue that also occurs for other sections, like
debug sections which are also skipped and can have relo section.

As suggested by Daniel.  To avoid keeping state about all skipped
sections, instead perform a direct qlookup in the ELF object.  Lookup
the section that the relo-section points to and check if it contains
executable machine instructions (denoted by the sh_flags
SHF_EXECINSTR).  Use this check to also skip irrelevant relo-sections.

Note, for samples/bpf/ the '-target bpf' parameter to clang cannot be used
due to incompatibility with asm embedded headers, that some of the samples
include. This is explained in more details by Yonghong Song in bpf_devel_QA.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/lib/bpf/libbpf.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index cda652a12880..8aeedf71ea28 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -726,6 +726,24 @@ bpf_object__init_maps(struct bpf_object *obj)
 	return 0;
 }
 
+static bool section_have_execinstr(struct bpf_object *obj, int idx)
+{
+	Elf_Scn *scn;
+	GElf_Shdr sh;
+
+	scn = elf_getscn(obj->efile.elf, idx);
+	if (!scn)
+		return false;
+
+	if (gelf_getshdr(scn, &sh) != &sh)
+		return false;
+
+	if (sh.sh_flags & SHF_EXECINSTR)
+		return true;
+
+	return false;
+}
+
 static int bpf_object__elf_collect(struct bpf_object *obj)
 {
 	Elf *elf = obj->efile.elf;
@@ -807,6 +825,14 @@ static int bpf_object__elf_collect(struct bpf_object *obj)
 		} else if (sh.sh_type == SHT_REL) {
 			void *reloc = obj->efile.reloc;
 			int nr_reloc = obj->efile.nr_reloc + 1;
+			int sec = sh.sh_info; /* points to other section */
+
+			/* Only do relo for section with exec instructions */
+			if (!section_have_execinstr(obj, sec)) {
+				pr_debug("skip relo %s(%d) for section(%d)\n",
+					 name, idx, sec);
+				continue;
+			}
 
 			reloc = realloc(reloc,
 					sizeof(*obj->efile.reloc) * nr_reloc);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 174/189] KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code

[Sasha Levin]

From: Paul Mackerras <paulus@ozlabs.org>

[ Upstream commit 05f2bb0313a2855e491dadfc8319b7da261d7074 ]

This fixes the computation of the HPTE index to use when the HPT
resizing code encounters a bolted HPTE which is stored in its
secondary HPTE group.  The code inverts the HPTE group number, which
is correct, but doesn't then mask it with new_hash_mask.  As a result,
new_pteg will be effectively negative, resulting in new_hptep
pointing before the new HPT, which will corrupt memory.

In addition, this removes two BUG_ON statements.  The condition that
the BUG_ONs were testing -- that we have computed the hash value
incorrectly -- has never been observed in testing, and if it did
occur, would only affect the guest, not the host.  Given that
BUG_ON should only be used in conditions where the kernel (i.e.
the host kernel, in this case) can't possibly continue execution,
it is not appropriate here.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/kvm/book3s_64_mmu_hv.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index b73dbc9e797d..dc0f2ade589e 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -1337,12 +1337,8 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 	}
 
 	new_pteg = hash & new_hash_mask;
-	if (vpte & HPTE_V_SECONDARY) {
-		BUG_ON(~pteg != (hash & old_hash_mask));
-		new_pteg = ~new_pteg;
-	} else {
-		BUG_ON(pteg != (hash & old_hash_mask));
-	}
+	if (vpte & HPTE_V_SECONDARY)
+		new_pteg = ~hash & new_hash_mask;
 
 	new_idx = new_pteg * HPTES_PER_GROUP + (idx % HPTES_PER_GROUP);
 	new_hptep = (__be64 *)(new->virt + (new_idx << 4));
-- 
2.15.1

[PATCH AUTOSEL for 4.15 175/189] ibmvnic: Reset long term map ID counter

[Sasha Levin]

From: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>

[ Upstream commit faefaa97215a0c05105d7ae180fe1a3b5979ad1f ]

When allocating RX or TX buffer pools, the driver needs to provide a
unique mapping ID to firmware for each pool. This value is assigned
using a counter which is incremented after a new pool is created. The
ID can be an integer ranging from 1-255. When migrating to a device
that requests a different number of queues, this value was not being
reset properly. As a result, after enough migrations, the counter
exceeded the upper bound and pool creation failed. This is fixed by
resetting the counter to one in this case.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 4ba49a98c689..297007678584 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1634,6 +1634,7 @@ static int do_reset(struct ibmvnic_adapter *adapter,
 				return rc;
 		} else if (adapter->req_rx_queues != old_num_rx_queues ||
 			   adapter->req_tx_queues != old_num_tx_queues) {
+			adapter->map_id = 1;
 			release_rx_pools(adapter);
 			release_tx_pools(adapter);
 			init_rx_pools(netdev);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 176/189] SUNRPC: Don't call __UDPX_INC_STATS() from a preemptible context

[Sasha Levin]

From: Trond Myklebust <trond.myklebust@primarydata.com>

[ Upstream commit 0afa6b4412988019db14c6bfb8c6cbdf120ca9ad ]

Calling __UDPX_INC_STATS() from a preemptible context leads to a
warning of the form:

 BUG: using __this_cpu_add() in preemptible [00000000] code: kworker/u5:0/31
 caller is xs_udp_data_receive_workfn+0x194/0x270
 CPU: 1 PID: 31 Comm: kworker/u5:0 Not tainted 4.15.0-rc8-00076-g90ea9f1 #2
 Workqueue: xprtiod xs_udp_data_receive_workfn
 Call Trace:
  dump_stack+0x85/0xc1
  check_preemption_disabled+0xce/0xe0
  xs_udp_data_receive_workfn+0x194/0x270
  process_one_work+0x318/0x620
  worker_thread+0x20a/0x390
  ? process_one_work+0x620/0x620
  kthread+0x120/0x130
  ? __kthread_bind_mask+0x60/0x60
  ret_from_fork+0x24/0x30

Since we're taking a spinlock in those functions anyway, let's fix the
issue by moving the call so that it occurs under the spinlock.

Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/sunrpc/xprtsock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 6d0cc3b8f932..33e2baebdca7 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -1070,18 +1070,18 @@ static void xs_udp_data_read_skb(struct rpc_xprt *xprt,
 
 	/* Suck it into the iovec, verify checksum if not done by hw. */
 	if (csum_partial_copy_to_xdr(&rovr->rq_private_buf, skb)) {
-		__UDPX_INC_STATS(sk, UDP_MIB_INERRORS);
 		spin_lock(&xprt->recv_lock);
+		__UDPX_INC_STATS(sk, UDP_MIB_INERRORS);
 		goto out_unpin;
 	}
 
-	__UDPX_INC_STATS(sk, UDP_MIB_INDATAGRAMS);
 
 	spin_lock_bh(&xprt->transport_lock);
 	xprt_adjust_cwnd(xprt, task, copied);
 	spin_unlock_bh(&xprt->transport_lock);
 	spin_lock(&xprt->recv_lock);
 	xprt_complete_rqst(task, copied);
+	__UDPX_INC_STATS(sk, UDP_MIB_INDATAGRAMS);
 out_unpin:
 	xprt_unpin_rqst(rovr);
  out_unlock:
-- 
2.15.1

[PATCH AUTOSEL for 4.15 177/189] net: stmmac: discard disabled flags in interrupt status register

[Sasha Levin]

From: Niklas Cassel <niklas.cassel@axis.com>

[ Upstream commit 1b84ca187510f60f00f4e15255043ce19bb30410 ]

The interrupt status register in both dwmac1000 and dwmac4 ignores
interrupt enable (for dwmac4) / interrupt mask (for dwmac1000).
Therefore, if we want to check only the bits that can actually trigger
an irq, we have to filter the interrupt status register manually.

Commit 0a764db10337 ("stmmac: Discard masked flags in interrupt status
register") fixed this for dwmac1000. Fix the same issue for dwmac4.

Just like commit 0a764db10337 ("stmmac: Discard masked flags in
interrupt status register"), this makes sure that we do not get
spurious link up/link down prints.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index f3ed8f7853eb..05b3e7dd9821 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -562,10 +562,12 @@ static int dwmac4_irq_status(struct mac_device_info *hw,
 			     struct stmmac_extra_stats *x)
 {
 	void __iomem *ioaddr = hw->pcsr;
-	u32 intr_status;
+	u32 intr_status = readl(ioaddr + GMAC_INT_STATUS);
+	u32 intr_enable = readl(ioaddr + GMAC_INT_EN);
 	int ret = 0;
 
-	intr_status = readl(ioaddr + GMAC_INT_STATUS);
+	/* Discard disabled bits */
+	intr_status &= intr_enable;
 
 	/* Not used events (e.g. MMC interrupts) are not handled. */
 	if ((intr_status & mmc_tx_irq))
-- 
2.15.1

[PATCH AUTOSEL for 4.15 178/189] bpf: fix rlimit in reuseport net selftest

[Sasha Levin]

From: Daniel Borkmann <daniel@iogearbox.net>

[ Upstream commit 941ff6f11c020913f5cddf543a9ec63475d7c082 ]

Fix two issues in the reuseport_bpf selftests that were
reported by Linaro CI:

  [...]
  + ./reuseport_bpf
  ---- IPv4 UDP ----
  Testing EBPF mod 10...
  Reprograming, testing mod 5...
  ./reuseport_bpf: ebpf error. log:
  0: (bf) r6 = r1
  1: (20) r0 = *(u32 *)skb[0]
  2: (97) r0 %= 10
  3: (95) exit
  processed 4 insns
  : Operation not permitted
  + echo FAIL
  [...]
  ---- IPv4 TCP ----
  Testing EBPF mod 10...
  ./reuseport_bpf: failed to bind send socket: Address already in use
  + echo FAIL
  [...]

For the former adjust rlimit since this was the cause of
failure for loading the BPF prog, and for the latter add
SO_REUSEADDR.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://bugs.linaro.org/show_bug.cgi?id=3502
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/testing/selftests/net/reuseport_bpf.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/reuseport_bpf.c b/tools/testing/selftests/net/reuseport_bpf.c
index 4a8217448f20..cad14cd0ea92 100644
--- a/tools/testing/selftests/net/reuseport_bpf.c
+++ b/tools/testing/selftests/net/reuseport_bpf.c
@@ -21,6 +21,7 @@
 #include <sys/epoll.h>
 #include <sys/types.h>
 #include <sys/socket.h>
+#include <sys/resource.h>
 #include <unistd.h>
 
 #ifndef ARRAY_SIZE
@@ -190,11 +191,14 @@ static void send_from(struct test_params p, uint16_t sport, char *buf,
 	struct sockaddr * const saddr = new_any_sockaddr(p.send_family, sport);
 	struct sockaddr * const daddr =
 		new_loopback_sockaddr(p.send_family, p.recv_port);
-	const int fd = socket(p.send_family, p.protocol, 0);
+	const int fd = socket(p.send_family, p.protocol, 0), one = 1;
 
 	if (fd < 0)
 		error(1, errno, "failed to create send socket");
 
+	if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)))
+		error(1, errno, "failed to set reuseaddr");
+
 	if (bind(fd, saddr, sockaddr_size()))
 		error(1, errno, "failed to bind send socket");
 
@@ -433,6 +437,21 @@ void enable_fastopen(void)
 	}
 }
 
+static struct rlimit rlim_old, rlim_new;
+
+static  __attribute__((constructor)) void main_ctor(void)
+{
+	getrlimit(RLIMIT_MEMLOCK, &rlim_old);
+	rlim_new.rlim_cur = rlim_old.rlim_cur + (1UL << 20);
+	rlim_new.rlim_max = rlim_old.rlim_max + (1UL << 20);
+	setrlimit(RLIMIT_MEMLOCK, &rlim_new);
+}
+
+static __attribute__((destructor)) void main_dtor(void)
+{
+	setrlimit(RLIMIT_MEMLOCK, &rlim_old);
+}
+
 int main(void)
 {
 	fprintf(stderr, "---- IPv4 UDP ----\n");
-- 
2.15.1

[PATCH AUTOSEL for 4.15 179/189] ACPI / EC: Restore polling during noirq suspend/resume phases

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 3cd091a773936c54344a519f7ee1379ccb620bee ]

Commit 662591461c4b (ACPI / EC: Drop EC noirq hooks to fix a
regression) modified the ACPI EC driver so that it doesn't switch
over to busy polling mode during noirq stages of system suspend and
resume in an attempt to fix an issue resulting from that behavior.

However, that modification introduced a system resume regression on
Thinkpad X240, so make the EC driver switch over to the polling mode
during noirq stages of system suspend and resume again, which
effectively reverts the problematic commit.

Fixes: 662591461c4b (ACPI / EC: Drop EC noirq hooks to fix a regression)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197863
Reported-by: Markus Demleitner <m@tfiu.de>
Tested-by: Markus Demleitner <m@tfiu.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/acpi/ec.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 0252c9b9af3d..0ed52a06a224 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1927,6 +1927,9 @@ static int acpi_ec_suspend_noirq(struct device *dev)
 	    ec->reference_count >= 1)
 		acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_DISABLE);
 
+	if (acpi_sleep_no_ec_events())
+		acpi_ec_enter_noirq(ec);
+
 	return 0;
 }
 
@@ -1934,6 +1937,9 @@ static int acpi_ec_resume_noirq(struct device *dev)
 {
 	struct acpi_ec *ec = acpi_driver_data(to_acpi_device(dev));
 
+	if (acpi_sleep_no_ec_events())
+		acpi_ec_leave_noirq(ec);
+
 	if (ec_no_wakeup && test_bit(EC_FLAGS_STARTED, &ec->flags) &&
 	    ec->reference_count >= 1)
 		acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_ENABLE);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 180/189] PM / wakeirq: Fix unbalanced IRQ enable for wakeirq

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 69728051f5bf15efaf6edfbcfe1b5a49a2437918 ]

If a device is runtime PM suspended when we enter suspend and has
a dedicated wake IRQ, we can get the following warning:

WARNING: CPU: 0 PID: 108 at kernel/irq/manage.c:526 enable_irq+0x40/0x94
[  102.087860] Unbalanced enable for IRQ 147
...
(enable_irq) from [<c06117a8>] (dev_pm_arm_wake_irq+0x4c/0x60)
(dev_pm_arm_wake_irq) from [<c0618360>]
 (device_wakeup_arm_wake_irqs+0x58/0x9c)
(device_wakeup_arm_wake_irqs) from [<c0615948>]
(dpm_suspend_noirq+0x10/0x48)
(dpm_suspend_noirq) from [<c01ac7ac>]
(suspend_devices_and_enter+0x30c/0xf14)
(suspend_devices_and_enter) from [<c01adf20>]
(enter_state+0xad4/0xbd8)
(enter_state) from [<c01ad3ec>] (pm_suspend+0x38/0x98)
(pm_suspend) from [<c01ab3e8>] (state_store+0x68/0xc8)

This is because the dedicated wake IRQ for the device may have been
already enabled earlier by dev_pm_enable_wake_irq_check().  Fix the
issue by checking for runtime PM suspended status.

This issue can be easily reproduced by setting serial console log level
to zero, letting the serial console idle, and suspend the system from
an ssh terminal.  On resume, dmesg will have the warning above.

The reason why I have not run into this issue earlier has been that I
typically run my PM test cases from on a serial console instead over ssh.

Fixes: c84345597558 (PM / wakeirq: Enable dedicated wakeirq for suspend)
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/base/power/wakeirq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/wakeirq.c b/drivers/base/power/wakeirq.c
index ae0429827f31..67c50738834b 100644
--- a/drivers/base/power/wakeirq.c
+++ b/drivers/base/power/wakeirq.c
@@ -323,7 +323,8 @@ void dev_pm_arm_wake_irq(struct wake_irq *wirq)
 		return;
 
 	if (device_may_wakeup(wirq->dev)) {
-		if (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED)
+		if (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED &&
+		    !pm_runtime_status_suspended(wirq->dev))
 			enable_irq(wirq->irq);
 
 		enable_irq_wake(wirq->irq);
@@ -345,7 +346,8 @@ void dev_pm_disarm_wake_irq(struct wake_irq *wirq)
 	if (device_may_wakeup(wirq->dev)) {
 		disable_irq_wake(wirq->irq);
 
-		if (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED)
+		if (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED &&
+		    !pm_runtime_status_suspended(wirq->dev))
 			disable_irq_nosync(wirq->irq);
 	}
 }
-- 
2.15.1

[PATCH AUTOSEL for 4.15 181/189] vfs/proc/kcore, x86/mm/kcore: Fix SMAP fault when dumping vsyscall user page

[Sasha Levin]

From: Jia Zhang <zhang.jia@linux.alibaba.com>

[ Upstream commit 595dd46ebfc10be041a365d0a3fa99df50b6ba73 ]

Commit:

  df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data")

... introduced a bounce buffer to work around CONFIG_HARDENED_USERCOPY=y.
However, accessing the vsyscall user page will cause an SMAP fault.

Replace memcpy() with copy_from_user() to fix this bug works, but adding
a common way to handle this sort of user page may be useful for future.

Currently, only vsyscall page requires KCORE_USER.

Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1518446694-21124-2-git-send-email-zhang.jia@linux.alibaba.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/mm/init_64.c | 3 +--
 fs/proc/kcore.c       | 4 ++++
 include/linux/kcore.h | 1 +
 3 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 60ae1fe3609f..780097ed24ea 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -1186,8 +1186,7 @@ void __init mem_init(void)
 	register_page_bootmem_info();
 
 	/* Register memory areas for /proc/kcore */
-	kclist_add(&kcore_vsyscall, (void *)VSYSCALL_ADDR,
-			 PAGE_SIZE, KCORE_OTHER);
+	kclist_add(&kcore_vsyscall, (void *)VSYSCALL_ADDR, PAGE_SIZE, KCORE_USER);
 
 	mem_init_print_info(NULL);
 }
diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c
index e8a93bc8285d..d1e82761de81 100644
--- a/fs/proc/kcore.c
+++ b/fs/proc/kcore.c
@@ -510,6 +510,10 @@ read_kcore(struct file *file, char __user *buffer, size_t buflen, loff_t *fpos)
 			/* we have to zero-fill user buffer even if no read */
 			if (copy_to_user(buffer, buf, tsz))
 				return -EFAULT;
+		} else if (m->type == KCORE_USER) {
+			/* User page is handled prior to normal kernel page: */
+			if (copy_to_user(buffer, (char *)start, tsz))
+				return -EFAULT;
 		} else {
 			if (kern_addr_valid(start)) {
 				/*
diff --git a/include/linux/kcore.h b/include/linux/kcore.h
index 7ff25a808fef..80db19d3a505 100644
--- a/include/linux/kcore.h
+++ b/include/linux/kcore.h
@@ -10,6 +10,7 @@ enum kcore_type {
 	KCORE_VMALLOC,
 	KCORE_RAM,
 	KCORE_VMEMMAP,
+	KCORE_USER,
 	KCORE_OTHER,
 };
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 183/189] x86/platform/UV: Fix GAM Range Table entries less than 1GB

[Sasha Levin]

From: "mike.travis@hpe.com" <mike.travis@hpe.com>

[ Upstream commit c25d99d20ba69824a1e2cc118e04b877cd427afc ]

The latest UV platforms include the new ApachePass NVDIMMs into the
UV address space.  This has introduced address ranges in the Global
Address Map Table that are less than the previous lowest range, which
was 2GB.  Fix the address calculation so it accommodates address ranges
from bytes to exabytes.

Signed-off-by: Mike Travis <mike.travis@hpe.com>
Reviewed-by: Andrew Banman <andrew.banman@hpe.com>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180205221503.190219903@stormcage.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kernel/apic/x2apic_uv_x.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index e1b8e8bf6b3c..256a9924b8d8 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -1174,16 +1174,25 @@ static void __init decode_gam_rng_tbl(unsigned long ptr)
 
 	uv_gre_table = gre;
 	for (; gre->type != UV_GAM_RANGE_TYPE_UNUSED; gre++) {
+		unsigned long size = ((unsigned long)(gre->limit - lgre)
+					<< UV_GAM_RANGE_SHFT);
+		int order = 0;
+		char suffix[] = " KMGTPE";
+
+		while (size > 9999 && order < sizeof(suffix)) {
+			size /= 1024;
+			order++;
+		}
+
 		if (!index) {
 			pr_info("UV: GAM Range Table...\n");
 			pr_info("UV:  # %20s %14s %5s %4s %5s %3s %2s\n", "Range", "", "Size", "Type", "NASID", "SID", "PN");
 		}
-		pr_info("UV: %2d: 0x%014lx-0x%014lx %5luG %3d   %04x  %02x %02x\n",
+		pr_info("UV: %2d: 0x%014lx-0x%014lx %5lu%c %3d   %04x  %02x %02x\n",
 			index++,
 			(unsigned long)lgre << UV_GAM_RANGE_SHFT,
 			(unsigned long)gre->limit << UV_GAM_RANGE_SHFT,
-			((unsigned long)(gre->limit - lgre)) >>
-				(30 - UV_GAM_RANGE_SHFT), /* 64M -> 1G */
+			size, suffix[order],
 			gre->type, gre->nasid, gre->sockid, gre->pnode);
 
 		lgre = gre->limit;
-- 
2.15.1

[PATCH AUTOSEL for 4.15 185/189] powerpc/powernv: IMC fix out of bounds memory access at shutdown

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit e7bde88cdb4f0e432398a7d29ca2a15d2c18952a ]

The OPAL IMC driver's shutdown handler disables nest PMU counters by
walking nodes and taking the first CPU out of their cpumask, which is
used to index into the paca (get_hard_smp_processor_id()). This does
not always do the right thing, and in particular for CPU-less nodes it
returns NR_CPUS and that overruns the paca and dereferences random
memory.

Fix it by being more careful about checking returned CPU, and only
using online CPUs. It's not clear this shutdown code makes sense after
commit 885dcd709b ("powerpc/perf: Add nest IMC PMU support"), but this
should not make things worse

Currently the bug causes us to call OPAL with a junk CPU number. A
separate patch in development to change the way pacas are allocated
escalates this bug into a crash:

  Unable to handle kernel paging request for data at address 0x2a21af1eeb000076
  Faulting instruction address: 0xc0000000000a5468
  Oops: Kernel access of bad area, sig: 11 [#1]
  ...
  NIP opal_imc_counters_shutdown+0x148/0x1d0
  LR  opal_imc_counters_shutdown+0x134/0x1d0
  Call Trace:
   opal_imc_counters_shutdown+0x134/0x1d0 (unreliable)
   platform_drv_shutdown+0x44/0x60
   device_shutdown+0x1f8/0x350
   kernel_restart_prepare+0x54/0x70
   kernel_restart+0x28/0xc0
   SyS_reboot+0x1d0/0x2c0
   system_call+0x58/0x6c

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/platforms/powernv/opal-imc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/opal-imc.c b/arch/powerpc/platforms/powernv/opal-imc.c
index 465ea105b771..5f27854b57aa 100644
--- a/arch/powerpc/platforms/powernv/opal-imc.c
+++ b/arch/powerpc/platforms/powernv/opal-imc.c
@@ -126,9 +126,11 @@ static void disable_nest_pmu_counters(void)
 	const struct cpumask *l_cpumask;
 
 	get_online_cpus();
-	for_each_online_node(nid) {
+	for_each_node_with_cpus(nid) {
 		l_cpumask = cpumask_of_node(nid);
-		cpu = cpumask_first(l_cpumask);
+		cpu = cpumask_first_and(l_cpumask, cpu_online_mask);
+		if (cpu >= nr_cpu_ids)
+			continue;
 		opal_imc_counters_stop(OPAL_IMC_COUNTERS_NEST,
 				       get_hard_smp_processor_id(cpu));
 	}
-- 
2.15.1

[PATCH AUTOSEL for 4.15 184/189] locking/qspinlock: Ensure node->count is updated before initialising node

[Sasha Levin]

From: Will Deacon <will.deacon@arm.com>

[ Upstream commit 11dc13224c975efcec96647a4768a6f1bb7a19a8 ]

When queuing on the qspinlock, the count field for the current CPU's head
node is incremented. This needn't be atomic because locking in e.g. IRQ
context is balanced and so an IRQ will return with node->count as it
found it.

However, the compiler could in theory reorder the initialisation of
node[idx] before the increment of the head node->count, causing an
IRQ to overwrite the initialised node and potentially corrupt the lock
state.

Avoid the potential for this harmful compiler reordering by placing a
barrier() between the increment of the head node->count and the subsequent
node initialisation.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1518528177-19169-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/locking/qspinlock.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/kernel/locking/qspinlock.c b/kernel/locking/qspinlock.c
index 294294c71ba4..50dc42aeaa56 100644
--- a/kernel/locking/qspinlock.c
+++ b/kernel/locking/qspinlock.c
@@ -379,6 +379,14 @@ queue:
 	tail = encode_tail(smp_processor_id(), idx);
 
 	node += idx;
+
+	/*
+	 * Ensure that we increment the head node->count before initialising
+	 * the actual node. If the compiler is kind enough to reorder these
+	 * stores, then an IRQ could overwrite our assignments.
+	 */
+	barrier();
+
 	node->locked = 0;
 	node->next = NULL;
 	pv_init_node(node);
-- 
2.15.1

[PATCH AUTOSEL for 4.15 186/189] perf test: Fix test trace+probe_libc_inet_pton.sh for s390x

[Sasha Levin]

From: Thomas Richter <tmricht@linux.vnet.ibm.com>

[ Upstream commit 7a92453620d42c3a5fea94a864dc6aa04c262b93 ]

On Intel test case trace+probe_libc_inet_pton.sh succeeds and the
output is:

[root@f27 perf]# ./perf trace --no-syscalls
                  -e probe_libc:inet_pton/max-stack=3/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.037 ms

 --- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.037/0.037/0.037/0.000 ms
     0.000 probe_libc:inet_pton:(7fa40ac618a0))
              __GI___inet_pton (/usr/lib64/libc-2.26.so)
              getaddrinfo (/usr/lib64/libc-2.26.so)
              main (/usr/bin/ping)

The kernel stack unwinder is used, it is specified implicitly
as call-graph=fp (frame pointer).

On s390x only dwarf is available for stack unwinding. It is also
done in user space. This requires different parameter setup
and result checking for s390x and Intel.

This patch adds separate perf trace setup and result checking
for Intel and s390x. On s390x specify this command line to
get a call-graph and handle the different call graph result
checking:

[root@s35lp76 perf]# ./perf trace --no-syscalls
	-e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.041 ms

 --- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.041/0.041/0.041/0.000 ms
     0.000 probe_libc:inet_pton:(3ffb9942060))
            __GI___inet_pton (/usr/lib64/libc-2.26.so)
            gaih_inet (inlined)
            __GI_getaddrinfo (inlined)
            main (/usr/bin/ping)
            __libc_start_main (/usr/lib64/libc-2.26.so)
            _start (/usr/bin/ping)
[root@s35lp76 perf]#

Before:
[root@s8360047 perf]# ./perf test -vv 58
58: probe libc's inet_pton & backtrace it with ping       :
 --- start ---
test child forked, pid 26349
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.079 ms
 --- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.079/0.079/0.079/0.000 ms
0.000 probe_libc:inet_pton:(3ff925c2060))
test child finished with -1
 ---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
[root@s8360047 perf]#

After:
[root@s35lp76 perf]# ./perf test -vv 57
57: probe libc's inet_pton & backtrace it with ping       :
 --- start ---
test child forked, pid 38708
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.038 ms
 --- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.038/0.038/0.038/0.000 ms
0.000 probe_libc:inet_pton:(3ff87342060))
__GI___inet_pton (/usr/lib64/libc-2.26.so)
gaih_inet (inlined)
__GI_getaddrinfo (inlined)
main (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
_start (/usr/bin/ping)
test child finished with 0
 ---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
[root@s35lp76 perf]#

On Intel the test case runs unchanged and succeeds.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180117083831.101001-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 .../perf/tests/shell/trace+probe_libc_inet_pton.sh | 23 +++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/tools/perf/tests/shell/trace+probe_libc_inet_pton.sh b/tools/perf/tests/shell/trace+probe_libc_inet_pton.sh
index 8b3da21a08f1..c446c894b297 100755
--- a/tools/perf/tests/shell/trace+probe_libc_inet_pton.sh
+++ b/tools/perf/tests/shell/trace+probe_libc_inet_pton.sh
@@ -22,10 +22,23 @@ trace_libc_inet_pton_backtrace() {
 	expected[4]="rtt min.*"
 	expected[5]="[0-9]+\.[0-9]+[[:space:]]+probe_libc:inet_pton:\([[:xdigit:]]+\)"
 	expected[6]=".*inet_pton[[:space:]]\($libc\)$"
-	expected[7]="getaddrinfo[[:space:]]\($libc\)$"
-	expected[8]=".*\(.*/bin/ping.*\)$"
-
-	perf trace --no-syscalls -e probe_libc:inet_pton/max-stack=3/ ping -6 -c 1 ::1 2>&1 | grep -v ^$ | while read line ; do
+	case "$(uname -m)" in
+	s390x)
+		eventattr='call-graph=dwarf'
+		expected[7]="gaih_inet[[:space:]]\(inlined\)$"
+		expected[8]="__GI_getaddrinfo[[:space:]]\(inlined\)$"
+		expected[9]="main[[:space:]]\(.*/bin/ping.*\)$"
+		expected[10]="__libc_start_main[[:space:]]\($libc\)$"
+		expected[11]="_start[[:space:]]\(.*/bin/ping.*\)$"
+		;;
+	*)
+		eventattr='max-stack=3'
+		expected[7]="getaddrinfo[[:space:]]\($libc\)$"
+		expected[8]=".*\(.*/bin/ping.*\)$"
+		;;
+	esac
+
+	perf trace --no-syscalls -e probe_libc:inet_pton/$eventattr/ ping -6 -c 1 ::1 2>&1 | grep -v ^$ | while read line ; do
 		echo $line
 		echo "$line" | egrep -q "${expected[$idx]}"
 		if [ $? -ne 0 ] ; then
@@ -33,7 +46,7 @@ trace_libc_inet_pton_backtrace() {
 			exit 1
 		fi
 		let idx+=1
-		[ $idx -eq 9 ] && break
+		[ -z "${expected[$idx]}" ] && break
 	done
 }
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 187/189] irqchip/gic-v3: Ignore disabled ITS nodes

[Sasha Levin]

From: Stephen Boyd <sboyd@codeaurora.org>

[ Upstream commit 95a2562590c2f64a0398183f978d5cf3db6d0284 ]

On some platforms there's an ITS available but it's not enabled
because reading or writing the registers is denied by the
firmware. In fact, reading or writing them will cause the system
to reset. We could remove the node from DT in such a case, but
it's better to skip nodes that are marked as "disabled" in DT so
that we can describe the hardware that exists and use the status
property to indicate how the firmware has configured things.

Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/irqchip/irq-gic-v3-its-pci-msi.c               | 2 ++
 drivers/irqchip/irq-gic-v3-its-platform-msi.c          | 2 ++
 drivers/irqchip/irq-gic-v3-its.c                       | 2 ++
 drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c | 2 ++
 4 files changed, 8 insertions(+)

diff --git a/drivers/irqchip/irq-gic-v3-its-pci-msi.c b/drivers/irqchip/irq-gic-v3-its-pci-msi.c
index 14a8c0a7e095..25a98de5cfb2 100644
--- a/drivers/irqchip/irq-gic-v3-its-pci-msi.c
+++ b/drivers/irqchip/irq-gic-v3-its-pci-msi.c
@@ -132,6 +132,8 @@ static int __init its_pci_of_msi_init(void)
 
 	for (np = of_find_matching_node(NULL, its_device_id); np;
 	     np = of_find_matching_node(np, its_device_id)) {
+		if (!of_device_is_available(np))
+			continue;
 		if (!of_property_read_bool(np, "msi-controller"))
 			continue;
 
diff --git a/drivers/irqchip/irq-gic-v3-its-platform-msi.c b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
index 833a90fe33ae..8881a053c173 100644
--- a/drivers/irqchip/irq-gic-v3-its-platform-msi.c
+++ b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
@@ -154,6 +154,8 @@ static void __init its_pmsi_of_init(void)
 
 	for (np = of_find_matching_node(NULL, its_device_id); np;
 	     np = of_find_matching_node(np, its_device_id)) {
+		if (!of_device_is_available(np))
+			continue;
 		if (!of_property_read_bool(np, "msi-controller"))
 			continue;
 
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 12c325066deb..d49bd1120bd9 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -3313,6 +3313,8 @@ static int __init its_of_probe(struct device_node *node)
 
 	for (np = of_find_matching_node(node, its_device_id); np;
 	     np = of_find_matching_node(np, its_device_id)) {
+		if (!of_device_is_available(np))
+			continue;
 		if (!of_property_read_bool(np, "msi-controller")) {
 			pr_warn("%pOF: no msi-controller property, ITS ignored\n",
 				np);
diff --git a/drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c b/drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c
index 123e4af58408..50260cb5056d 100644
--- a/drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c
+++ b/drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c
@@ -75,6 +75,8 @@ int __init its_fsl_mc_msi_init(void)
 
 	for (np = of_find_matching_node(NULL, its_device_id); np;
 	     np = of_find_matching_node(np, its_device_id)) {
+		if (!of_device_is_available(np))
+			continue;
 		if (!of_property_read_bool(np, "msi-controller"))
 			continue;
 
-- 
2.15.1

[PATCH AUTOSEL for 4.15 188/189] cpumask: Make for_each_cpu_wrap() available on UP as well

[Sasha Levin]

From: Michael Kelley <mhkelley@outlook.com>

[ Upstream commit d207af2eab3f8668b95ad02b21930481c42806fd ]

for_each_cpu_wrap() was originally added in the #else half of a
large "#if NR_CPUS == 1" statement, but was omitted in the #if
half.  This patch adds the missing #if half to prevent compile
errors when NR_CPUS is 1.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Michael Kelley <mhkelley@outlook.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kys@microsoft.com
Cc: martin.petersen@oracle.com
Cc: mikelley@microsoft.com
Fixes: c743f0a5c50f ("sched/fair, cpumask: Export for_each_cpu_wrap()")
Link: http://lkml.kernel.org/r/SN6PR1901MB2045F087F59450507D4FCC17CBF50@SN6PR1901MB2045.namprd19.prod.outlook.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/linux/cpumask.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 75b565194437..09b8d8aaa35f 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -170,6 +170,8 @@ static inline unsigned int cpumask_local_spread(unsigned int i, int node)
 	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
 #define for_each_cpu_not(cpu, mask)		\
 	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
+#define for_each_cpu_wrap(cpu, mask, start)	\
+	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask, (void)(start))
 #define for_each_cpu_and(cpu, mask, and)	\
 	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask, (void)and)
 #else
-- 
2.15.1

[PATCH AUTOSEL for 4.15 189/189] irqchip/gic-v3: Change pr_debug message to pr_devel

[Sasha Levin]

From: Mark Salter <msalter@redhat.com>

[ Upstream commit b6dd4d83dc2f78cebc9a7e6e7e4bc2be4d29b94d ]

The pr_debug() in gic-v3 gic_send_sgi() can trigger a circular locking
warning:

 GICv3: CPU10: ICC_SGI1R_EL1 5000400
 ======================================================
 WARNING: possible circular locking dependency detected
 4.15.0+ #1 Tainted: G        W
 ------------------------------------------------------
 dynamic_debug01/1873 is trying to acquire lock:
  ((console_sem).lock){-...}, at: [<0000000099c891ec>] down_trylock+0x20/0x4c

 but task is already holding lock:
  (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #2 (&rq->lock){-.-.}:
        __lock_acquire+0x3b4/0x6e0
        lock_acquire+0xf4/0x2a8
        _raw_spin_lock+0x4c/0x60
        task_fork_fair+0x3c/0x148
        sched_fork+0x10c/0x214
        copy_process.isra.32.part.33+0x4e8/0x14f0
        _do_fork+0xe8/0x78c
        kernel_thread+0x48/0x54
        rest_init+0x34/0x2a4
        start_kernel+0x45c/0x488

 -> #1 (&p->pi_lock){-.-.}:
        __lock_acquire+0x3b4/0x6e0
        lock_acquire+0xf4/0x2a8
        _raw_spin_lock_irqsave+0x58/0x70
        try_to_wake_up+0x48/0x600
        wake_up_process+0x28/0x34
        __up.isra.0+0x60/0x6c
        up+0x60/0x68
        __up_console_sem+0x4c/0x7c
        console_unlock+0x328/0x634
        vprintk_emit+0x25c/0x390
        dev_vprintk_emit+0xc4/0x1fc
        dev_printk_emit+0x88/0xa8
        __dev_printk+0x58/0x9c
        _dev_info+0x84/0xa8
        usb_new_device+0x100/0x474
        hub_port_connect+0x280/0x92c
        hub_event+0x740/0xa84
        process_one_work+0x240/0x70c
        worker_thread+0x60/0x400
        kthread+0x110/0x13c
        ret_from_fork+0x10/0x18

 -> #0 ((console_sem).lock){-...}:
        validate_chain.isra.34+0x6e4/0xa20
        __lock_acquire+0x3b4/0x6e0
        lock_acquire+0xf4/0x2a8
        _raw_spin_lock_irqsave+0x58/0x70
        down_trylock+0x20/0x4c
        __down_trylock_console_sem+0x3c/0x9c
        console_trylock+0x20/0xb0
        vprintk_emit+0x254/0x390
        vprintk_default+0x58/0x90
        vprintk_func+0xbc/0x164
        printk+0x80/0xa0
        __dynamic_pr_debug+0x84/0xac
        gic_raise_softirq+0x184/0x18c
        smp_cross_call+0xac/0x218
        smp_send_reschedule+0x3c/0x48
        resched_curr+0x60/0x9c
        check_preempt_curr+0x70/0xdc
        wake_up_new_task+0x310/0x470
        _do_fork+0x188/0x78c
        SyS_clone+0x44/0x50
        __sys_trace_return+0x0/0x4

 other info that might help us debug this:

 Chain exists of:
   (console_sem).lock --> &p->pi_lock --> &rq->lock

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&rq->lock);
                                lock(&p->pi_lock);
                                lock(&rq->lock);
   lock((console_sem).lock);

  *** DEADLOCK ***

 2 locks held by dynamic_debug01/1873:
  #0:  (&p->pi_lock){-.-.}, at: [<000000001366df53>] wake_up_new_task+0x40/0x470
  #1:  (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc

 stack backtrace:
 CPU: 10 PID: 1873 Comm: dynamic_debug01 Tainted: G        W        4.15.0+ #1
 Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS T48 10/02/2017
 Call trace:
  dump_backtrace+0x0/0x188
  show_stack+0x24/0x2c
  dump_stack+0xa4/0xe0
  print_circular_bug.isra.31+0x29c/0x2b8
  check_prev_add.constprop.39+0x6c8/0x6dc
  validate_chain.isra.34+0x6e4/0xa20
  __lock_acquire+0x3b4/0x6e0
  lock_acquire+0xf4/0x2a8
  _raw_spin_lock_irqsave+0x58/0x70
  down_trylock+0x20/0x4c
  __down_trylock_console_sem+0x3c/0x9c
  console_trylock+0x20/0xb0
  vprintk_emit+0x254/0x390
  vprintk_default+0x58/0x90
  vprintk_func+0xbc/0x164
  printk+0x80/0xa0
  __dynamic_pr_debug+0x84/0xac
  gic_raise_softirq+0x184/0x18c
  smp_cross_call+0xac/0x218
  smp_send_reschedule+0x3c/0x48
  resched_curr+0x60/0x9c
  check_preempt_curr+0x70/0xdc
  wake_up_new_task+0x310/0x470
  _do_fork+0x188/0x78c
  SyS_clone+0x44/0x50
  __sys_trace_return+0x0/0x4
 GICv3: CPU0: ICC_SGI1R_EL1 12000

This could be fixed with printk_deferred() but that might lessen its
usefulness for debugging. So change it to pr_devel to keep it out of
production kernels. Developers working on gic-v3 can enable it as
needed in their kernels.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/irqchip/irq-gic-v3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 980ae8e7df30..0b73cbae9dae 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -673,7 +673,7 @@ static void gic_send_sgi(u64 cluster_id, u16 tlist, unsigned int irq)
 	       MPIDR_TO_SGI_RS(cluster_id)		|
 	       tlist << ICC_SGI1R_TARGET_LIST_SHIFT);
 
-	pr_debug("CPU%d: ICC_SGI1R_EL1 %llx\n", smp_processor_id(), val);
+	pr_devel("CPU%d: ICC_SGI1R_EL1 %llx\n", smp_processor_id(), val);
 	gic_write_sgi1r(val);
 }
 
-- 
2.15.1

Re: [PATCH AUTOSEL for 4.15 019/189] printk: Add console owner and waiter logic to load balance console writes

[Petr Mladek]

On Mon 2018-04-09 00:16:59, Sasha Levin wrote:
> From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
> 
> [ Upstream commit dbdda842fe96f8932bae554f0adf463c27c42bc7 ]
> 
> This patch implements what I discussed in Kernel Summit. I added
> lockdep annotation (hopefully correctly), and it hasn't had any splats
> (since I fixed some bugs in the first iterations). It did catch
> problems when I had the owner covering too much. But now that the owner
> is only set when actively calling the consoles, lockdep has stayed
> quiet.

I do not think that this is a material for stable backports. Yes, it
is a fix but it is not trivial. There are already 3 follow up commits:

c162d5b4338d72deed6 ("printk: Hide console waiter logic into helpers")
fd5f7cde1b85d4c8e09 ("printk: Never set console_may_schedule in
		console_trylock()")
c14376de3a1befa70d9 ("printk: Wake klogd when passing console_lock owner")

One is just a code clean up but the other two are changes/fixes that
should go together with Steven's patch.

These changes tries to prevent softlockups. It is a problem that is
being discussed for years. We are still waiting for feedback to see if
more changes will be necessary. IMHO, there is no reason to hurry and
backport it everywhere.

Best Regards,
Petr

Re: [PATCH AUTOSEL for 4.15 044/189] ASoC: bcm2835: fix hw_params error when device is in prepared state

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 364 bytes --]

On Mon, Apr 09, 2018 at 12:17:20AM +0000, Sasha Levin wrote:

> ---
>  sound/soc/bcm/bcm2835-i2s.c | 20 ++++++++++++++------
>  1 file changed, 14 insertions(+), 6 deletions(-)

This is a relatively big refactoring, including moving things from one
userspace operation to another.  I'd not be 100% sure it doesn't have
any extra implicit or explicit dependencies.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH AUTOSEL for 4.15 142/189] firmware: dmi_scan: Fix handling of empty DMI strings

[Jean Delvare]

Hi Parag,

On Sun, 8 Apr 2018 21:21:19 -0400, Parag Warudkar wrote:
> On Sun, Apr 8, 2018 at 8:18 PM, Sasha Levin <Alexander.Levin@microsoft.com>
> wrote:
> 
> > From: Jean Delvare <jdelvare@suse.de>
> >
> > [ Upstream commit a7770ae194569e96a93c48aceb304edded9cc648 ]
> >
> > [snip]
> >  
> 
> 
> > * Strings starting with 8 spaces are all considered empty, even if
> >   non-space characters follow (sounds like a weird thing to do, but
> >   I have actually seen occurrences of this in DMI tables before.)
> >  
> 
> Unless I am misreading the patch we will now allocate memory for
> len(spaces)+len(string) for this case.

Correct.

> Have you seen BIOSes with lots of <space>string occurrences?

A fair number, yes, but most of them were thankfully not in strings we
are saving. Also note that most of them only have 1 or 2 leading
spaces, not 8+, so this commit makes no difference for them.

> If so what's the point of allocating memory for the leading spaces?

Presented like that, it sounds like we are silly. But look at things
the other way around: what's the point of storing these leading spaces
in the DMI table in the first place? Whenever this happens, the
hardware manufacturer is to blame, not us.

As much as possible, we should stick to the specification and assume
the other party does as well. Stripping the leading spaces would be
trivial, but hiding their mistakes does not help hardware manufacturers
in the long run anyway. If they can't see that it's wrong, it's harder
for them to fix it.

> IOW, what happens if we strip leading space before allocating?

At boot time, we save a few bytes of memory, on the affected systems
only. No code cost, but possibly some confusion as to why we strip
leading spaces (which are rare) but not trailing spaces (which in my
experience are more frequent.)

At run time, the exact matching of the affected DMI strings would be
less error-prone (although strings having leading spaces are likely to
also have trailing spaces, annihilating the benefits.) Non-exact
matching would be marginally faster, again only for the affected
systems.

As a conclusion, it's doable, but the benefit is very small and limited
to a few broken systems, and it has the downside of not discouraging
low-quality tables, so my position is that it's not worth it and not
desirable.

-- 
Jean Delvare
SUSE L3 Support

Re: [PATCH AUTOSEL for 4.15 142/189] firmware: dmi_scan: Fix handling of empty DMI strings

[Parag Warudkar]

On Mon, Apr 9, 2018 at 8:48 AM, Jean Delvare <jdelvare@suse.de> wrote:
> As a conclusion, it's doable, but the benefit is very small and limited
> to a few broken systems, and it has the downside of not discouraging
> low-quality tables, so my position is that it's not worth it and not
> desirable.

Thanks for the explanation Jean, I just wanted to make sure we are not
going back to the original problem of allocating lots of memory for
lots of spaces. Given the limited benefit and low likelihood of
encountering lots of strings with lots of leading and trailing spaces,
I agree, it's best to stick to the spec. And it's also no longer a
static 2048 byte array we are allocating from anymore!

--Parag

Re: [PATCH AUTOSEL for 4.15 168/189] nfsd: return RESOURCE not GARBAGE_ARGS on too many ops

[J. Bruce Fields]

What's your default on these patches on these AUTOSEL patches if you
don't get an ACK or NACK?  Do you apply them anyway?

(I'd skip this one as it doesn't meet the "It must fix a real bug that
bothers people" criterion.  But I don't recall it *causing* any bugs
either, so the stakes are low, I'm mainly just curious.)

--b.

On Mon, Apr 09, 2018 at 12:19:02AM +0000, Sasha Levin wrote:
> From: "J. Bruce Fields" <bfields@redhat.com>
> 
> [ Upstream commit 0078117c6d9160031b866cfa1853514d4f6865d2 ]
> 
> A client that sends more than a hundred ops in a single compound
> currently gets an rpc-level GARBAGE_ARGS error.
> 
> It would be more helpful to return NFS4ERR_RESOURCE, since that gives
> the client a better idea how to recover (for example by splitting up the
> compound into smaller compounds).
> 
> This is all a bit academic since we've never actually seen a reason for
> clients to send such long compounds, but we may as well fix it.
> 
> While we're there, just use NFSD4_MAX_OPS_PER_COMPOUND == 16, the
> constant we already use in the 4.1 case, instead of hard-coding 100.
> Chances anyone actually uses even 16 ops per compound are small enough
> that I think there's a neglible risk or any regression.
> 
> This fixes pynfs test COMP6.
> 
> Reported-by: "Lu, Xinyu" <luxy.fnst@cn.fujitsu.com>
> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
> ---
>  fs/nfsd/nfs4proc.c | 3 +++
>  fs/nfsd/nfs4xdr.c  | 9 +++++++--
>  2 files changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
> index effeeb4f556f..a0bed2b2004d 100644
> --- a/fs/nfsd/nfs4proc.c
> +++ b/fs/nfsd/nfs4proc.c
> @@ -1703,6 +1703,9 @@ nfsd4_proc_compound(struct svc_rqst *rqstp)
>  	status = nfserr_minor_vers_mismatch;
>  	if (nfsd_minorversion(args->minorversion, NFSD_TEST) <= 0)
>  		goto out;
> +	status = nfserr_resource;
> +	if (args->opcnt > NFSD_MAX_OPS_PER_COMPOUND)
> +		goto out;
>  
>  	status = nfs41_check_op_ordering(args);
>  	if (status) {
> diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
> index 2c61c6b8ae09..5dcd7cb45b2d 100644
> --- a/fs/nfsd/nfs4xdr.c
> +++ b/fs/nfsd/nfs4xdr.c
> @@ -1918,8 +1918,13 @@ nfsd4_decode_compound(struct nfsd4_compoundargs *argp)
>  
>  	if (argp->taglen > NFSD4_MAX_TAGLEN)
>  		goto xdr_error;
> -	if (argp->opcnt > 100)
> -		goto xdr_error;
> +	/*
> +	 * NFS4ERR_RESOURCE is a more helpful error than GARBAGE_ARGS
> +	 * here, so we return success at the xdr level so that
> +	 * nfsd4_proc can handle this is an NFS-level error.
> +	 */
> +	if (argp->opcnt > NFSD_MAX_OPS_PER_COMPOUND)
> +		return 0;
>  
>  	if (argp->opcnt > ARRAY_SIZE(argp->iops)) {
>  		argp->ops = kzalloc(argp->opcnt * sizeof(*argp->ops), GFP_KERNEL);
> -- 
> 2.15.1

Re: [PATCH AUTOSEL for 4.15 048/189] clk: ingenic: Fix recalc_rate for clocks with fixed divider

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 627 bytes --]

On Mon, Apr 09, 2018 at 12:17:24AM +0000, Sasha Levin wrote:
> From: Paul Cercueil <paul@crapouillou.net>
> 
> [ Upstream commit e6cfa64375d34a6c8c1861868a381013b2d3b921 ]
> 
> Previously, the clocks with a fixed divider would report their rate
> as being the same as the one of their parent, independently of the
> divider in use. This commit fixes this behaviour.
> 
> This went unnoticed as neither the jz4740 nor the jz4780 CGU code
> have clocks with fixed dividers yet.

FYI this one isn't strictly necessary for backport since JZ4770 support
is new in 4.16, but its probably harmless too.

Cheers
James

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH AUTOSEL for 4.15 019/189] printk: Add console owner and waiter logic to load balance console writes

[Sasha Levin]

On Mon, Apr 09, 2018 at 10:15:35AM +0200, Petr Mladek wrote:
>On Mon 2018-04-09 00:16:59, Sasha Levin wrote:
>> From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
>>
>> [ Upstream commit dbdda842fe96f8932bae554f0adf463c27c42bc7 ]
>>
>> This patch implements what I discussed in Kernel Summit. I added
>> lockdep annotation (hopefully correctly), and it hasn't had any splats
>> (since I fixed some bugs in the first iterations). It did catch
>> problems when I had the owner covering too much. But now that the owner
>> is only set when actively calling the consoles, lockdep has stayed
>> quiet.
>
>I do not think that this is a material for stable backports. Yes, it
>is a fix but it is not trivial. There are already 3 follow up commits:
>
>c162d5b4338d72deed6 ("printk: Hide console waiter logic into helpers")
>fd5f7cde1b85d4c8e09 ("printk: Never set console_may_schedule in
>		console_trylock()")
>c14376de3a1befa70d9 ("printk: Wake klogd when passing console_lock owner")
>
>One is just a code clean up but the other two are changes/fixes that
>should go together with Steven's patch.
>
>These changes tries to prevent softlockups. It is a problem that is
>being discussed for years. We are still waiting for feedback to see if
>more changes will be necessary. IMHO, there is no reason to hurry and
>backport it everywhere.
>
>Best Regards,
>Petr

I'll remove it, thanks Petr!

Re: [PATCH AUTOSEL for 4.15 044/189] ASoC: bcm2835: fix hw_params error when device is in prepared state

[Sasha Levin]

On Mon, Apr 09, 2018 at 10:27:24AM +0100, Mark Brown wrote:
>On Mon, Apr 09, 2018 at 12:17:20AM +0000, Sasha Levin wrote:
>
>> ---
>>  sound/soc/bcm/bcm2835-i2s.c | 20 ++++++++++++++------
>>  1 file changed, 14 insertions(+), 6 deletions(-)
>
>This is a relatively big refactoring, including moving things from one
>userspace operation to another.  I'd not be 100% sure it doesn't have
>any extra implicit or explicit dependencies.

I'll remove it, thanks Mark!

Re: [PATCH AUTOSEL for 4.15 168/189] nfsd: return RESOURCE not GARBAGE_ARGS on too many ops

[Sasha Levin]

On Mon, Apr 09, 2018 at 11:27:47AM -0400, J. Bruce Fields wrote:
>What's your default on these patches on these AUTOSEL patches if you
>don't get an ACK or NACK?  Do you apply them anyway?

Right now it's opt-out, so it'll get merged unless you NACK it.

In general, these patches get higher visibility as a notice will be sent
a few times for each of these, when:

1. I added it to my queue
2. When Greg sends his review cycle
3. Once a stable kernel is released

>(I'd skip this one as it doesn't meet the "It must fix a real bug that
>bothers people" criterion.  But I don't recall it *causing* any bugs
>either, so the stakes are low, I'm mainly just curious.)

I'll drop it, thanks!

Re: [PATCH AUTOSEL for 4.15 048/189] clk: ingenic: Fix recalc_rate for clocks with fixed divider

[Sasha Levin]

On Mon, Apr 09, 2018 at 09:12:42PM +0100, James Hogan wrote:
>On Mon, Apr 09, 2018 at 12:17:24AM +0000, Sasha Levin wrote:
>> From: Paul Cercueil <paul@crapouillou.net>
>>
>> [ Upstream commit e6cfa64375d34a6c8c1861868a381013b2d3b921 ]
>>
>> Previously, the clocks with a fixed divider would report their rate
>> as being the same as the one of their parent, independently of the
>> divider in use. This commit fixes this behaviour.
>>
>> This went unnoticed as neither the jz4740 nor the jz4780 CGU code
>> have clocks with fixed dividers yet.
>
>FYI this one isn't strictly necessary for backport since JZ4770 support
>is new in 4.16, but its probably harmless too.
>
>Cheers
>James

I'll drop it, thanks James!

Re: [PATCH AUTOSEL for 4.15 048/189] clk: ingenic: Fix recalc_rate for clocks with fixed divider

[Sasha Levin]

On Mon, Apr 09, 2018 at 09:12:42PM +0100, James Hogan wrote:
>On Mon, Apr 09, 2018 at 12:17:24AM +0000, Sasha Levin wrote:
>> From: Paul Cercueil <paul@crapouillou.net>
>>
>> [ Upstream commit e6cfa64375d34a6c8c1861868a381013b2d3b921 ]
>>
>> Previously, the clocks with a fixed divider would report their rate
>> as being the same as the one of their parent, independently of the
>> divider in use. This commit fixes this behaviour.
>>
>> This went unnoticed as neither the jz4740 nor the jz4780 CGU code
>> have clocks with fixed dividers yet.
>
>FYI this one isn't strictly necessary for backport since JZ4770 support
>is new in 4.16, but its probably harmless too.
>
>Cheers
>James

I'll drop it, thanks James!
From Alexander.Levin@microsoft.com Sun Apr 15 16:44:54 2018
Received: with ECARTIS (v1.0.0; list linux-mips); Sun, 15 Apr 2018 16:45:01 +0200 (CEST)
Received: from mail-bn3nam01on0123.outbound.protection.outlook.com ([104.47.33.123]:61628
        "EHLO NAM01-BN3-obe.outbound.protection.outlook.com"
        rhost-flags-OK-OK-OK-FAIL) by eddie.linux-mips.org with ESMTP
        id S23993928AbeDOOoympcsu convert rfc822-to-8bit (ORCPT
        <rfc822;linux-mips@linux-mips.org>); Sun, 15 Apr 2018 16:44:54 +0200
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com;
 s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version;
 bh=/WCryBd9VzOzpYgFtzgBQew3l6acjwTMOlgYARTrMmM=;
 b=FLa0k2otLxrhPgbWlZAg7fcOh296xQR7eMOgDpgicyboOmC7vslbkOmh4+uaosl8adMRYuWG0irIwWpw285fvfuQ0aqcaQ5YM7UH+/nVABHUf8jf4thrDiWFaS/83CUozaveZpjzMGmclEMXZ5DXq0DY0v4VjHMAgoho0gnuRhI=
Received: from DM5PR2101MB1032.namprd21.prod.outlook.com (52.132.128.13) by
 DM5PR2101MB0983.namprd21.prod.outlook.com (52.132.133.29) with Microsoft SMTP
 Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id
 15.20.696.0; Sun, 15 Apr 2018 14:44:45 +0000
Received: from DM5PR2101MB1032.namprd21.prod.outlook.com
 ([fe80::8109:aef0:a777:7059]) by DM5PR2101MB1032.namprd21.prod.outlook.com
 ([fe80::8109:aef0:a777:7059%2]) with mapi id 15.20.0715.004; Sun, 15 Apr 2018
 14:44:45 +0000
From:   Sasha Levin <Alexander.Levin@microsoft.com>
To:     James Hogan <jhogan@kernel.org>
CC:     "stable@vger.kernel.org" <stable@vger.kernel.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        Maarten ter Huurne <maarten@treewalker.org>,
        Ralf Baechle <ralf@linux-mips.org>,
        "linux-mips@linux-mips.org" <linux-mips@linux-mips.org>
Subject: Re: [PATCH AUTOSEL for 4.14 043/161] MIPS: JZ4770: Work around
 config2 misreporting associativity
Thread-Topic: [PATCH AUTOSEL for 4.14 043/161] MIPS: JZ4770: Work around
 config2 misreporting associativity
Thread-Index: AQHTz5iLqRoxliRgSEKMEGprDVcqeKP43ecAgAkTfIA=
Date:   Sun, 15 Apr 2018 14:44:45 +0000
Message-ID: <20180415144443.GR2341@sasha-vm>
References: <20180409001936.162706-1-alexander.levin@microsoft.com>
 <20180409001936.162706-43-alexander.levin@microsoft.com>
 <20180409200838.GB17347@saruman>
In-Reply-To: <20180409200838.GB17347@saruman>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: 
X-MS-TNEF-Correlator: 
x-originating-ip: [52.168.54.252]
x-ms-publictraffictype: Email
x-microsoft-exchange-diagnostics: 1;DM5PR2101MB0983;7:Q++DI3ASyEbCG5EVKjNslATTlF2txQh+AtKqxNXOGMU6r7Jk9+xKOR/qjRevx9us/EBokjVcrXq65jqwQw3DT7QZ5Kylz3WByXuDWvTLRUps1UvGrCHYYiJqguaR2PV7KOzXU6DjVlM/Gt8zOtNDYZOHZWqBvz29+V1IbAtthzsGtygJUBKi7aR8QP55rx1bNvxyGZMsY6hv/axt0uXCVHMWJ6zwOjoDWYAka2u/tFaBAcZhXvJhTtD9bhX81TGY;20:d5MOXPuEmSRApExA3HlWA8lzY753WXwS5PDiaJPVhsvWPmkXOMZimwfGer3MsL/UlmnngVp/mCEyUY4VnGO38Y84oIW4IgSdGdmcyOu/3FGibvWroC1pgn26XWGLB7TxDK8XTdUClbDqoMDJ0KPCIA/VnlAOm/NjBJbusPSFMfc=
x-ms-exchange-antispam-srfa-diagnostics: SOS;
x-ms-office365-filtering-ht: Tenant
x-microsoft-antispam: UriScan:;BCL:0;PCL:0;RULEID:(7020095)(4652020)(48565401081)(5600026)(4534165)(4627221)(201703031133081)(201702281549075)(2017052603328)(7193020);SRVR:DM5PR2101MB0983;
x-ms-traffictypediagnostic: DM5PR2101MB0983:
authentication-results: spf=none (sender IP is )
 smtp.mailfrom=Alexander.Levin@microsoft.com; 
x-microsoft-antispam-prvs: <DM5PR2101MB0983E356357457C7833E7953FBB10@DM5PR2101MB0983.namprd21.prod.outlook.com>
x-exchange-antispam-report-test: UriScan:;
x-exchange-antispam-report-cfa-test: BCL:0;PCL:0;RULEID:(8211001083)(61425038)(6040522)(2401047)(5005006)(8121501046)(3002001)(3231232)(944501347)(52105095)(10201501046)(93006095)(93001095)(6055026)(61426038)(61427038)(6041310)(201703131423095)(201702281528075)(20161123555045)(201703061421075)(201703061406153)(20161123558120)(20161123562045)(20161123564045)(20161123560045)(6072148)(201708071742011);SRVR:DM5PR2101MB0983;BCL:0;PCL:0;RULEID:;SRVR:DM5PR2101MB0983;
x-forefront-prvs: 0643BDA83C
x-forefront-antispam-report: SFV:NSPM;SFS:(10019020)(7916004)(366004)(396003)(39380400002)(376002)(39860400002)(346002)(199004)(189003)(6506007)(5250100002)(7736002)(102836004)(229853002)(6916009)(9686003)(6512007)(99286004)(76176011)(305945005)(33896004)(2906002)(1076002)(575784001)(86362001)(3660700001)(86612001)(53936002)(2900100001)(106356001)(3280700002)(105586002)(33656002)(6246003)(486006)(22452003)(10090500001)(14454004)(476003)(11346002)(72206003)(446003)(25786009)(26005)(6116002)(3846002)(66066001)(33716001)(6486002)(4326008)(68736007)(186003)(5660300001)(316002)(10290500003)(97736004)(8936002)(8676002)(81166006)(81156014)(6436002)(478600001)(54906003)(217873001);DIR:OUT;SFP:1102;SCL:1;SRVR:DM5PR2101MB0983;H:DM5PR2101MB1032.namprd21.prod.outlook.com;FPR:;SPF:None;LANG:en;PTR:InfoNoRecords;A:1;MX:1;
received-spf: None (protection.outlook.com: microsoft.com does not designate
 permitted sender hosts)
x-microsoft-antispam-message-info: l41PTpopSZeySvanoB+L8z6kaT/U0fBkHzTJMSPGmPplYIkX4b2+7an50XRsY4iA51XPp/LKw7EJ1eUtAFEAID0PlfVhGqLg4jV3pGcau58V968GDMLSGa046asDJpEHntgNRYwGtP8BaAUWK0D6F1tB6CmHYoGKe38DNk24xcTh5Lz7B3Zi3xdWjLzhOBnD
spamdiagnosticoutput: 1:99
spamdiagnosticmetadata: NSPM
Content-Type: text/plain; charset="us-ascii"
Content-ID: <A4189D4C1E5693469236E6E4724659E0@namprd21.prod.outlook.com>
Content-Transfer-Encoding: 8BIT
MIME-Version: 1.0
X-MS-Office365-Filtering-Correlation-Id: 46ab6969-bcf2-4ba9-90d8-08d5a2df6e32
X-OriginatorOrg: microsoft.com
X-MS-Exchange-CrossTenant-Network-Message-Id: 46ab6969-bcf2-4ba9-90d8-08d5a2df6e32
X-MS-Exchange-CrossTenant-originalarrivaltime: 15 Apr 2018 14:44:45.1486
 (UTC)
X-MS-Exchange-CrossTenant-fromentityheader: Hosted
X-MS-Exchange-CrossTenant-id: 72f988bf-86f1-41af-91ab-2d7cd011db47
X-MS-Exchange-Transport-CrossTenantHeadersStamped: DM5PR2101MB0983
Return-Path: <Alexander.Levin@microsoft.com>
X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0)
X-Orcpt: rfc822;linux-mips@linux-mips.org
Original-Recipient: rfc822;linux-mips@linux-mips.org
X-archive-position: 63535
X-ecartis-version: Ecartis v1.0.0
Sender: linux-mips-bounce@linux-mips.org
Errors-to: linux-mips-bounce@linux-mips.org
X-original-sender: Alexander.Levin@microsoft.com
Precedence: bulk
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
List-software: Ecartis version 1.0.0
List-Id: linux-mips <linux-mips.eddie.linux-mips.org>
X-List-ID: linux-mips <linux-mips.eddie.linux-mips.org>
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
X-list: linux-mips
Content-Length: 607
Lines: 17

On Mon, Apr 09, 2018 at 09:08:38PM +0100, James Hogan wrote:
>On Mon, Apr 09, 2018 at 12:20:20AM +0000, Sasha Levin wrote:
>> From: Maarten ter Huurne <maarten@treewalker.org>
>>
>> [ Upstream commit 1f7412e0e2f327fe7dc5a0c2fc36d7b319d05d47 ]
>>
>> According to config2, the associativity would be 5-ways, but the
>> documentation states 4-ways, which also matches the documented
>> L2 cache size of 256 kB.
>
>JZ4770 support is new in 4.16, so no need for this to be backported.
>More likely it'll just break the build due to references to
>MACH_INGENIC_JZ4770.
>
>Cheers
>James

Now removed, thanks James!
From BATV+7d17fcac680d61fee2d2+5348+infradead.org+hch@bombadil.srs.infradead.org Sun Apr 15 16:59:55 2018
Received: with ECARTIS (v1.0.0; list linux-mips); Sun, 15 Apr 2018 17:00:01 +0200 (CEST)
Received: from bombadil.infradead.org ([IPv6:2607:7c80:54:e::133]:39450 "EHLO
        bombadil.infradead.org" rhost-flags-OK-OK-OK-OK)
        by eddie.linux-mips.org with ESMTP id S23993885AbeDOO7zMueKu (ORCPT
        <rfc822;linux-mips@linux-mips.org>); Sun, 15 Apr 2018 16:59:55 +0200
DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed;
        d=infradead.org; s=bombadil.20170209; h=Message-Id:Date:Subject:Cc:To:From:
        Sender:Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding:
        Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender:
        Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:References:List-Id:
        List-Help:List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive;
         bh=LYPaiE3wDJg0+pilf34gNm69Ac6EUWTYANNPb1A4Fc4=; b=H1P+SOjvgGHTR/YoB2n/G8EwJ
        OH0+VVE2IzyAI9A9rdAGJwA5TqSv6ElOuuGVbegAZFozPMcSR9IIPPOiYSitlkaLmpsDknKYw1bGi
        UruhsaQbO+N1pTkpSDY1g5pmopb2ZURccx8pv4ttITWKeIn8gPyR2I+XXWBBY+3uvBF8xi8t+hVO3
        r83Vnc8QyXQ9+tOHLXJzya1A5MYqbzcFzdpEXARaj61lyDEcWU2r4JWD8uR7WdMkhh9GN2skgIjNP
        ZGBqvcj9qLY+PJIdYYdwy4Q89G6HuWvZ9nsAjaukVv+2DzXATWnFVc74YavAn6yZdRvJXjpJlHCnm
        vk2Av2dgA==;
Received: from 089144200254.atnat0009.highway.a1.net ([89.144.200.254] helo=localhost)
        by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux))
        id 1f7j89-0005Zl-NC; Sun, 15 Apr 2018 14:59:50 +0000
From:   Christoph Hellwig <hch@lst.de>
To:     Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
        iommu@lists.linux-foundation.org
Cc:     x86@kernel.org, linux-block@vger.kernel.org,
        linux-pci@vger.kernel.org, linux-mm@kvack.org,
        linux-ide@vger.kernel.org, linux-mips@linux-mips.org,
        sparclinux@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: centralize SWIOTLB config symbol and misc other cleanups
Date:   Sun, 15 Apr 2018 16:59:35 +0200
Message-Id: <20180415145947.1248-1-hch@lst.de>
X-Mailer: git-send-email 2.17.0
X-SRS-Rewrite: SMTP reverse-path rewritten from <hch@infradead.org> by bombadil.infradead.org. See http://www.infradead.org/rpr.html
Return-Path: <BATV+7d17fcac680d61fee2d2+5348+infradead.org+hch@bombadil.srs.infradead.org>
X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0)
X-Orcpt: rfc822;linux-mips@linux-mips.org
Original-Recipient: rfc822;linux-mips@linux-mips.org
X-archive-position: 63536
X-ecartis-version: Ecartis v1.0.0
Sender: linux-mips-bounce@linux-mips.org
Errors-to: linux-mips-bounce@linux-mips.org
X-original-sender: hch@lst.de
Precedence: bulk
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
List-software: Ecartis version 1.0.0
List-Id: linux-mips <linux-mips.eddie.linux-mips.org>
X-List-ID: linux-mips <linux-mips.eddie.linux-mips.org>
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
X-list: linux-mips
Content-Length: 153
Lines: 4

Hi all,

this seris aims for a single defintion of the Kconfig symbol.  To get
there various cleanups, mostly about config symbols are included as well.

Re: [PATCH AUTOSEL for 4.15 168/189] nfsd: return RESOURCE not GARBAGE_ARGS on too many ops

[J. Bruce Fields]

On Sun, Apr 15, 2018 at 02:37:39PM +0000, Sasha Levin wrote:
> On Mon, Apr 09, 2018 at 11:27:47AM -0400, J. Bruce Fields wrote:
> >What's your default on these patches on these AUTOSEL patches if you
> >don't get an ACK or NACK?  Do you apply them anyway?
> 
> Right now it's opt-out, so it'll get merged unless you NACK it.
> 
> In general, these patches get higher visibility as a notice will be sent
> a few times for each of these, when:
> 
> 1. I added it to my queue
> 2. When Greg sends his review cycle
> 3. Once a stable kernel is released

OK, thanks for the explanation!

--b.