From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/7] i.MX6DL: mamoj: Add PFUZE100 support
Date: Wed, 11 Apr 2018 18:06:11 +0530 [thread overview]
Message-ID: <20180411123615.15130-4-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180411123615.15130-1-jagan@amarulasolutions.com>
MX6DL Mamoj boards has Freescale PFUZE100 PMIC, add support
for it through DM_PMIC dt definition.
pmic log:
========
=> pmic list
| Name | Parent name | Parent uclass @ seq
| pfuze100 at 08 | i2c at 021f8000 | i2c @ 3
=> pmic dev pfuze100 at 08
dev: 0 @ pfuze100 at 08
=> pmic dump
Dump pmic: pfuze100 at 08 registers
0x00: 10 00 00 21 00 01 3f 01 00 7f 00 00 00 00 00 81
0x10: 00 00 3f 00 00 00 00 00 00 00 00 10 00 00 00 00
0x20: 2b 2b 2b 08 c4 00 00 00 00 00 00 00 00 00 2b 2b
0x30: 2b 08 c4 00 00 72 72 72 08 d4 00 00 2c 2c 2c 08
0x40: e4 00 00 2c 2c 2c 08 e4 00 00 6f 6f 6f 08 f4 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 48 00 00 00 10 06 1e 1e 17 10
0x70: 1a 1f 00 00 00 00 00 00 00 00 00 00 00 00 00
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
---
arch/arm/dts/imx6dl-mamoj.dts | 113 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/mx6/Kconfig | 2 +
configs/imx6dl_mamoj_defconfig | 1 +
3 files changed, 116 insertions(+)
diff --git a/arch/arm/dts/imx6dl-mamoj.dts b/arch/arm/dts/imx6dl-mamoj.dts
index 558043445b..3f6d8aa4a2 100644
--- a/arch/arm/dts/imx6dl-mamoj.dts
+++ b/arch/arm/dts/imx6dl-mamoj.dts
@@ -33,6 +33,119 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
+
+ pmic: pfuze100 at 08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ /* CPU vdd_arm core */
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* SOC vdd_soc */
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* I/O power GEN_3V3 */
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* DDR memory */
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* DDR memory */
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* not used */
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /* not used */
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ /* PMIC vsnvs. EX boot mode */
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* not used */
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ /* not used */
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ /* not used */
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /* 1v8 general power */
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* 2v8 general power IMX6 */
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* 3v3 Ethernet */
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
};
&uart3 {
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 5007fe3941..ccc754b123 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -235,6 +235,8 @@ config TARGET_MX6DL_MAMOJ
select DM_GPIO
select DM_I2C
select DM_MMC
+ select DM_PMIC
+ select DM_PMIC_PFUZE100
select DM_THERMAL
select SPL
select SUPPORT_SPL
diff --git a/configs/imx6dl_mamoj_defconfig b/configs/imx6dl_mamoj_defconfig
index e2a18d2c30..362962fdf3 100644
--- a/configs/imx6dl_mamoj_defconfig
+++ b/configs/imx6dl_mamoj_defconfig
@@ -16,6 +16,7 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
+CONFIG_CMD_PMIC=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
--
2.14.3
next prev parent reply other threads:[~2018-04-11 12:36 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-11 12:36 [U-Boot] [PATCH v2 0/7] i.MX6DL: Add BTicino Mamoj board support Jagan Teki
2018-04-11 12:36 ` [U-Boot] [PATCH v2 1/7] i.MX6: board: Add BTicino i.MX6DL Mamoj initial support Jagan Teki
2018-04-26 7:17 ` Stefano Babic
2018-04-26 7:33 ` Jagan Teki
2018-04-26 7:46 ` Stefano Babic
2018-04-26 10:43 ` Jagan Teki
2018-05-02 12:41 ` Jagan Teki
2018-05-03 8:38 ` Stefano Babic
2018-04-11 12:36 ` [U-Boot] [PATCH v2 2/7] i.MX6DL: mamoj: Add I2C support Jagan Teki
2018-04-26 7:18 ` Stefano Babic
2018-04-11 12:36 ` Jagan Teki [this message]
2018-04-26 7:18 ` [U-Boot] [PATCH v2 3/7] i.MX6DL: mamoj: Add PFUZE100 support Stefano Babic
2018-04-11 12:36 ` [U-Boot] [PATCH v2 4/7] configs: imx6dl_mamoj: Enable fastboot and ums Jagan Teki
2018-04-11 12:36 ` [U-Boot] [PATCH v2 5/7] configs: imx6dl-mamoj: Add DFU support Jagan Teki
2018-04-11 12:36 ` [U-Boot] [PATCH v2 6/7] configs: imx6dl-mamoj: Add Falcon mode support Jagan Teki
2018-04-11 12:36 ` [U-Boot] [PATCH v2 7/7] configs: imx6dl-mamoj: Enable HAB Jagan Teki
2018-04-19 11:34 ` [U-Boot] [PATCH v2 0/7] i.MX6DL: Add BTicino Mamoj board support Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180411123615.15130-4-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.