All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Hans Verkuil <hverkuil@xs4all.nl>,
	linux-media@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
	"Kieran Bingham" <kieran.bingham@ideasonboard.com>,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: [PATCH v14 22/33] rcar-vin: use different v4l2 operations in media controller mode
Date: Sat, 14 Apr 2018 13:57:15 +0200	[thread overview]
Message-ID: <20180414115726.5075-23-niklas.soderlund+renesas@ragnatech.se> (raw)
In-Reply-To: <20180414115726.5075-1-niklas.soderlund+renesas@ragnatech.se>

When the driver runs in media controller mode it should not directly
control the subdevice instead userspace will be responsible for
configuring the pipeline. To be able to run in this mode a different set
of v4l2 operations needs to be used.

Add a new set of v4l2 operations to support operation without directly
interacting with the source subdevice.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---

* Changes since v13
- Add review from Laurent.

* Changes since v11
- Fixed error labels name in rvin_mc_open().
---
 drivers/media/platform/rcar-vin/rcar-dma.c  |   2 +-
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 158 +++++++++++++++++++++++++++-
 2 files changed, 156 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 905d975b2909a867..d70a689d9dd3713f 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -626,7 +626,7 @@ static int rvin_setup(struct rvin_dev *vin)
 		/* Default to TB */
 		vnmc = VNMC_IM_FULL;
 		/* Use BT if video standard can be read and is 60 Hz format */
-		if (vin->std & V4L2_STD_525_60)
+		if (!vin->info->use_mc && vin->std & V4L2_STD_525_60)
 			vnmc = VNMC_IM_FULL | VNMC_FOC;
 		break;
 	case V4L2_FIELD_INTERLACED_TB:
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index e4a99ef210044ab1..f07cb4e6fbdec4eb 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -18,12 +18,16 @@
 
 #include <media/v4l2-event.h>
 #include <media/v4l2-ioctl.h>
+#include <media/v4l2-mc.h>
 #include <media/v4l2-rect.h>
 
 #include "rcar-vin.h"
 
 #define RVIN_DEFAULT_FORMAT	V4L2_PIX_FMT_YUYV
+#define RVIN_DEFAULT_WIDTH	800
+#define RVIN_DEFAULT_HEIGHT	600
 #define RVIN_DEFAULT_FIELD	V4L2_FIELD_NONE
+#define RVIN_DEFAULT_COLORSPACE	V4L2_COLORSPACE_SRGB
 
 /* -----------------------------------------------------------------------------
  * Format Conversions
@@ -654,6 +658,73 @@ static const struct v4l2_ioctl_ops rvin_ioctl_ops = {
 	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
 };
 
+/* -----------------------------------------------------------------------------
+ * V4L2 Media Controller
+ */
+
+static int rvin_mc_try_fmt_vid_cap(struct file *file, void *priv,
+				   struct v4l2_format *f)
+{
+	struct rvin_dev *vin = video_drvdata(file);
+
+	rvin_format_align(vin, &f->fmt.pix);
+
+	return 0;
+}
+
+static int rvin_mc_s_fmt_vid_cap(struct file *file, void *priv,
+				 struct v4l2_format *f)
+{
+	struct rvin_dev *vin = video_drvdata(file);
+
+	if (vb2_is_busy(&vin->queue))
+		return -EBUSY;
+
+	rvin_format_align(vin, &f->fmt.pix);
+
+	vin->format = f->fmt.pix;
+
+	return 0;
+}
+
+static int rvin_mc_enum_input(struct file *file, void *priv,
+			      struct v4l2_input *i)
+{
+	if (i->index != 0)
+		return -EINVAL;
+
+	i->type = V4L2_INPUT_TYPE_CAMERA;
+	strlcpy(i->name, "Camera", sizeof(i->name));
+
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops rvin_mc_ioctl_ops = {
+	.vidioc_querycap		= rvin_querycap,
+	.vidioc_try_fmt_vid_cap		= rvin_mc_try_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap		= rvin_g_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap		= rvin_mc_s_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap	= rvin_enum_fmt_vid_cap,
+
+	.vidioc_enum_input		= rvin_mc_enum_input,
+	.vidioc_g_input			= rvin_g_input,
+	.vidioc_s_input			= rvin_s_input,
+
+	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
+	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
+	.vidioc_querybuf		= vb2_ioctl_querybuf,
+	.vidioc_qbuf			= vb2_ioctl_qbuf,
+	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
+	.vidioc_expbuf			= vb2_ioctl_expbuf,
+	.vidioc_prepare_buf		= vb2_ioctl_prepare_buf,
+	.vidioc_streamon		= vb2_ioctl_streamon,
+	.vidioc_streamoff		= vb2_ioctl_streamoff,
+
+	.vidioc_log_status		= v4l2_ctrl_log_status,
+	.vidioc_subscribe_event		= rvin_subscribe_event,
+	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
+};
+
 /* -----------------------------------------------------------------------------
  * File Operations
  */
@@ -797,6 +868,74 @@ static const struct v4l2_file_operations rvin_fops = {
 	.read		= vb2_fop_read,
 };
 
+/* -----------------------------------------------------------------------------
+ * Media controller file operations
+ */
+
+static int rvin_mc_open(struct file *file)
+{
+	struct rvin_dev *vin = video_drvdata(file);
+	int ret;
+
+	ret = mutex_lock_interruptible(&vin->lock);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_get_sync(vin->dev);
+	if (ret < 0)
+		goto err_unlock;
+
+	ret = v4l2_pipeline_pm_use(&vin->vdev.entity, 1);
+	if (ret < 0)
+		goto err_pm;
+
+	file->private_data = vin;
+
+	ret = v4l2_fh_open(file);
+	if (ret)
+		goto err_v4l2pm;
+
+	mutex_unlock(&vin->lock);
+
+	return 0;
+err_v4l2pm:
+	v4l2_pipeline_pm_use(&vin->vdev.entity, 0);
+err_pm:
+	pm_runtime_put(vin->dev);
+err_unlock:
+	mutex_unlock(&vin->lock);
+
+	return ret;
+}
+
+static int rvin_mc_release(struct file *file)
+{
+	struct rvin_dev *vin = video_drvdata(file);
+	int ret;
+
+	mutex_lock(&vin->lock);
+
+	/* the release helper will cleanup any on-going streaming. */
+	ret = _vb2_fop_release(file, NULL);
+
+	v4l2_pipeline_pm_use(&vin->vdev.entity, 0);
+	pm_runtime_put(vin->dev);
+
+	mutex_unlock(&vin->lock);
+
+	return ret;
+}
+
+static const struct v4l2_file_operations rvin_mc_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= video_ioctl2,
+	.open		= rvin_mc_open,
+	.release	= rvin_mc_release,
+	.poll		= vb2_fop_poll,
+	.mmap		= vb2_fop_mmap,
+	.read		= vb2_fop_read,
+};
+
 void rvin_v4l2_unregister(struct rvin_dev *vin)
 {
 	if (!video_is_registered(&vin->vdev))
@@ -832,18 +971,31 @@ int rvin_v4l2_register(struct rvin_dev *vin)
 	vin->v4l2_dev.notify = rvin_notify;
 
 	/* video node */
-	vdev->fops = &rvin_fops;
 	vdev->v4l2_dev = &vin->v4l2_dev;
 	vdev->queue = &vin->queue;
 	strlcpy(vdev->name, KBUILD_MODNAME, sizeof(vdev->name));
 	vdev->release = video_device_release_empty;
-	vdev->ioctl_ops = &rvin_ioctl_ops;
 	vdev->lock = &vin->lock;
 	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
 		V4L2_CAP_READWRITE;
 
+	/* Set a default format */
 	vin->format.pixelformat	= RVIN_DEFAULT_FORMAT;
-	rvin_reset_format(vin);
+	vin->format.width = RVIN_DEFAULT_WIDTH;
+	vin->format.height = RVIN_DEFAULT_HEIGHT;
+	vin->format.field = RVIN_DEFAULT_FIELD;
+	vin->format.colorspace = RVIN_DEFAULT_COLORSPACE;
+
+	if (vin->info->use_mc) {
+		vdev->fops = &rvin_mc_fops;
+		vdev->ioctl_ops = &rvin_mc_ioctl_ops;
+	} else {
+		vdev->fops = &rvin_fops;
+		vdev->ioctl_ops = &rvin_ioctl_ops;
+		rvin_reset_format(vin);
+	}
+
+	rvin_format_align(vin, &vin->format);
 
 	ret = video_register_device(&vin->vdev, VFL_TYPE_GRABBER, -1);
 	if (ret) {
-- 
2.16.2

  parent reply	other threads:[~2018-04-14 12:01 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-14 11:56 [PATCH v14 00/33] rcar-vin: Add Gen3 with media controller Niklas Söderlund
2018-04-14 11:56 ` [PATCH v14 01/33] dt-bindings: media: rcar_vin: Reverse SoC part number list Niklas Söderlund
2018-04-14 11:56 ` [PATCH v14 02/33] dt-bindings: media: rcar_vin: add device tree support for r8a774[35] Niklas Söderlund
2018-04-14 11:56 ` [PATCH v14 03/33] rcar-vin: add Gen3 devicetree bindings documentation Niklas Söderlund
2018-05-02 13:10   ` Geert Uytterhoeven
2018-04-14 11:56 ` [PATCH v14 04/33] rcar-vin: rename poorly named initialize and cleanup functions Niklas Söderlund
2018-04-14 11:56 ` [PATCH v14 05/33] rcar-vin: unregister video device on driver removal Niklas Söderlund
2018-04-14 11:56 ` [PATCH v14 06/33] rcar-vin: move subdevice handling to async callbacks Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 07/33] rcar-vin: move model information to own struct Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 08/33] rcar-vin: move max width and height information to chip information Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 09/33] rcar-vin: move functions regarding scaling Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 10/33] rcar-vin: all Gen2 boards can scale simplify logic Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 11/33] rcar-vin: set a default field to fallback on Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 12/33] rcar-vin: fix handling of single field frames (top, bottom and alternate fields) Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 13/33] rcar-vin: update bytesperline and sizeimage calculation Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 14/33] rcar-vin: align pixelformat check Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 15/33] rcar-vin: break out format alignment and checking Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 16/33] rcar-vin: simplify how formats are set and reset Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 17/33] rcar-vin: cache video standard Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 18/33] rcar-vin: move media bus configuration to struct rvin_dev Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 19/33] rcar-vin: enable Gen3 hardware configuration Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 20/33] rcar-vin: add function to manipulate Gen3 chsel value Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 21/33] rcar-vin: add flag to switch to media controller mode Niklas Söderlund
2018-04-14 11:57 ` Niklas Söderlund [this message]
2018-04-14 11:57 ` [PATCH v14 23/33] rcar-vin: force default colorspace for media centric mode Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 24/33] rcar-vin: prepare for media controller mode initialization Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 25/33] rcar-vin: add group allocator functions Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 26/33] rcar-vin: change name of video device Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 27/33] rcar-vin: add chsel information to rvin_info Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 28/33] rcar-vin: parse Gen3 OF and setup media graph Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 29/33] rcar-vin: add link notify for Gen3 Niklas Söderlund
2019-04-05 14:17   ` [PATCH v14,29/33] " Eugeniu Rosca
2019-04-05 14:34     ` Niklas Söderlund
2019-04-05 14:45       ` Eugeniu Rosca
2018-04-14 11:57 ` [PATCH v14 30/33] rcar-vin: extend {start,stop}_streaming to work with media controller Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 31/33] rcar-vin: enable support for r8a7795 Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 32/33] rcar-vin: enable support for r8a7796 Niklas Söderlund
2018-04-14 11:57 ` [PATCH v14 33/33] rcar-vin: enable support for r8a77970 Niklas Söderlund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180414115726.5075-23-niklas.soderlund+renesas@ragnatech.se \
    --to=niklas.soderlund+renesas@ragnatech.se \
    --cc=hverkuil@xs4all.nl \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.