From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Maxime Ripard Subject: [PATCH v11 2/4] v4l: cadence: Add Cadence MIPI-CSI2 RX driver Date: Tue, 24 Apr 2018 14:26:58 +0200 Message-Id: <20180424122700.5387-3-maxime.ripard@bootlin.com> In-Reply-To: <20180424122700.5387-1-maxime.ripard@bootlin.com> References: <20180424122700.5387-1-maxime.ripard@bootlin.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To: Mauro Carvalho Chehab , Mark Rutland , Rob Herring , Frank Rowand , Hans Verkuil Cc: Laurent Pinchart , linux-media@vger.kernel.org, devicetree@vger.kernel.org, Richard Sproul , Alan Douglas , Steve Creaney , Thomas Petazzoni , Boris Brezillon , =?UTF-8?q?Niklas=20S=C3=B6derlund?= , Sakari Ailus , Benoit Parrot , nm@ti.com, Simon Hatliff , Maxime Ripard List-ID: The Cadence CSI-2 RX Controller is an hardware block meant to be used as a bridge between a CSI-2 bus and pixel grabbers. It supports operating with internal or external D-PHY, with up to 4 lanes, or without any D-PHY. The current code only supports the latter case. It also support dynamic mapping of the CSI-2 virtual channels to the associated pixel grabbers, but that isn't allowed at the moment either. Acked-by: Sakari Ailus Reviewed-by: Niklas Söderlund Signed-off-by: Maxime Ripard --- MAINTAINERS | 7 + drivers/media/platform/Kconfig | 1 + drivers/media/platform/Makefile | 1 + drivers/media/platform/cadence/Kconfig | 23 + drivers/media/platform/cadence/Makefile | 1 + drivers/media/platform/cadence/cdns-csi2rx.c | 500 +++++++++++++++++++ 6 files changed, 533 insertions(+) create mode 100644 drivers/media/platform/cadence/Kconfig create mode 100644 drivers/media/platform/cadence/Makefile create mode 100644 drivers/media/platform/cadence/cdns-csi2rx.c diff --git a/MAINTAINERS b/MAINTAINERS index 0a1410d5a621..2c27d39611eb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3133,6 +3133,13 @@ S: Supported F: Documentation/filesystems/caching/cachefiles.txt F: fs/cachefiles/ +CADENCE MIPI-CSI2 BRIDGES +M: Maxime Ripard +L: linux-media@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/media/cdns,*.txt +F: drivers/media/platform/cadence/cdns-csi2* + CADET FM/AM RADIO RECEIVER DRIVER M: Hans Verkuil L: linux-media@vger.kernel.org diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index c7a1cf8a1b01..029340ec3da4 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -26,6 +26,7 @@ config VIDEO_VIA_CAMERA # # Platform multimedia device configuration # +source "drivers/media/platform/cadence/Kconfig" source "drivers/media/platform/davinci/Kconfig" diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile index 932515df4477..04bc1502a30e 100644 --- a/drivers/media/platform/Makefile +++ b/drivers/media/platform/Makefile @@ -3,6 +3,7 @@ # Makefile for the video capture/playback device drivers. # +obj-$(CONFIG_VIDEO_CADENCE) += cadence/ obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/ obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/ diff --git a/drivers/media/platform/cadence/Kconfig b/drivers/media/platform/cadence/Kconfig new file mode 100644 index 000000000000..70c95d79c8f7 --- /dev/null +++ b/drivers/media/platform/cadence/Kconfig @@ -0,0 +1,23 @@ +config VIDEO_CADENCE + bool "Cadence Video Devices" + help + If you have a media device designed by Cadence, say Y. + + Note that this option doesn't include new drivers in the kernel: + saying N will just cause Kconfig to skip all the questions about + Cadence media devices. + +if VIDEO_CADENCE + +config VIDEO_CADENCE_CSI2RX + tristate "Cadence MIPI-CSI2 RX Controller" + depends on MEDIA_CONTROLLER + depends on VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + help + Support for the Cadence MIPI CSI2 Receiver controller. + + To compile this driver as a module, choose M here: the module will be + called cdns-csi2rx. + +endif diff --git a/drivers/media/platform/cadence/Makefile b/drivers/media/platform/cadence/Makefile new file mode 100644 index 000000000000..99a4086b7448 --- /dev/null +++ b/drivers/media/platform/cadence/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_VIDEO_CADENCE_CSI2RX) += cdns-csi2rx.o diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c new file mode 100644 index 000000000000..01f8321c12da --- /dev/null +++ b/drivers/media/platform/cadence/cdns-csi2rx.c @@ -0,0 +1,500 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Cadence MIPI-CSI2 RX Controller v1.3 + * + * Copyright (C) 2017 Cadence Design Systems Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define CSI2RX_DEVICE_CFG_REG 0x000 + +#define CSI2RX_SOFT_RESET_REG 0x004 +#define CSI2RX_SOFT_RESET_PROTOCOL BIT(1) +#define CSI2RX_SOFT_RESET_FRONT BIT(0) + +#define CSI2RX_STATIC_CFG_REG 0x008 +#define CSI2RX_STATIC_CFG_DLANE_MAP(llane, plane) ((plane) << (16 + (llane) * 4)) +#define CSI2RX_STATIC_CFG_LANES_MASK GENMASK(11, 8) + +#define CSI2RX_STREAM_BASE(n) (((n) + 1) * 0x100) + +#define CSI2RX_STREAM_CTRL_REG(n) (CSI2RX_STREAM_BASE(n) + 0x000) +#define CSI2RX_STREAM_CTRL_START BIT(0) + +#define CSI2RX_STREAM_DATA_CFG_REG(n) (CSI2RX_STREAM_BASE(n) + 0x008) +#define CSI2RX_STREAM_DATA_CFG_EN_VC_SELECT BIT(31) +#define CSI2RX_STREAM_DATA_CFG_VC_SELECT(n) BIT((n) + 16) + +#define CSI2RX_STREAM_CFG_REG(n) (CSI2RX_STREAM_BASE(n) + 0x00c) +#define CSI2RX_STREAM_CFG_FIFO_MODE_LARGE_BUF (1 << 8) + +#define CSI2RX_LANES_MAX 4 +#define CSI2RX_STREAMS_MAX 4 + +enum csi2rx_pads { + CSI2RX_PAD_SINK, + CSI2RX_PAD_SOURCE_STREAM0, + CSI2RX_PAD_SOURCE_STREAM1, + CSI2RX_PAD_SOURCE_STREAM2, + CSI2RX_PAD_SOURCE_STREAM3, + CSI2RX_PAD_MAX, +}; + +struct csi2rx_priv { + struct device *dev; + unsigned int count; + + /* + * Used to prevent race conditions between multiple, + * concurrent calls to start and stop. + */ + struct mutex lock; + + void __iomem *base; + struct clk *sys_clk; + struct clk *p_clk; + struct clk *pixel_clk[CSI2RX_STREAMS_MAX]; + struct phy *dphy; + + u8 lanes[CSI2RX_LANES_MAX]; + u8 num_lanes; + u8 max_lanes; + u8 max_streams; + bool has_internal_dphy; + + struct v4l2_subdev subdev; + struct v4l2_async_notifier notifier; + struct media_pad pads[CSI2RX_PAD_MAX]; + + /* Remote source */ + struct v4l2_async_subdev asd; + struct v4l2_subdev *source_subdev; + int source_pad; +}; + +static inline +struct csi2rx_priv *v4l2_subdev_to_csi2rx(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct csi2rx_priv, subdev); +} + +static void csi2rx_reset(struct csi2rx_priv *csi2rx) +{ + writel(CSI2RX_SOFT_RESET_PROTOCOL | CSI2RX_SOFT_RESET_FRONT, + csi2rx->base + CSI2RX_SOFT_RESET_REG); + + udelay(10); + + writel(0, csi2rx->base + CSI2RX_SOFT_RESET_REG); +} + +static int csi2rx_start(struct csi2rx_priv *csi2rx) +{ + unsigned int i; + unsigned long lanes_used = 0; + u32 reg; + int ret; + + ret = clk_prepare_enable(csi2rx->p_clk); + if (ret) + return ret; + + csi2rx_reset(csi2rx); + + reg = csi2rx->num_lanes << 8; + for (i = 0; i < csi2rx->num_lanes; i++) { + reg |= CSI2RX_STATIC_CFG_DLANE_MAP(i, csi2rx->lanes[i]); + set_bit(csi2rx->lanes[i], &lanes_used); + } + + /* + * Even the unused lanes need to be mapped. In order to avoid + * to map twice to the same physical lane, keep the lanes used + * in the previous loop, and only map unused physical lanes to + * the rest of our logical lanes. + */ + for (i = csi2rx->num_lanes; i < csi2rx->max_lanes; i++) { + unsigned int idx = find_first_zero_bit(&lanes_used, + sizeof(lanes_used)); + set_bit(idx, &lanes_used); + reg |= CSI2RX_STATIC_CFG_DLANE_MAP(i, i + 1); + } + + writel(reg, csi2rx->base + CSI2RX_STATIC_CFG_REG); + + ret = v4l2_subdev_call(csi2rx->source_subdev, video, s_stream, true); + if (ret) + goto err_disable_pclk; + + /* + * Create a static mapping between the CSI virtual channels + * and the output stream. + * + * This should be enhanced, but v4l2 lacks the support for + * changing that mapping dynamically. + * + * We also cannot enable and disable independent streams here, + * hence the reference counting. + */ + for (i = 0; i < csi2rx->max_streams; i++) { + ret = clk_prepare_enable(csi2rx->pixel_clk[i]); + if (ret) + goto err_disable_pixclk; + + writel(CSI2RX_STREAM_CFG_FIFO_MODE_LARGE_BUF, + csi2rx->base + CSI2RX_STREAM_CFG_REG(i)); + + writel(CSI2RX_STREAM_DATA_CFG_EN_VC_SELECT | + CSI2RX_STREAM_DATA_CFG_VC_SELECT(i), + csi2rx->base + CSI2RX_STREAM_DATA_CFG_REG(i)); + + writel(CSI2RX_STREAM_CTRL_START, + csi2rx->base + CSI2RX_STREAM_CTRL_REG(i)); + } + + ret = clk_prepare_enable(csi2rx->sys_clk); + if (ret) + goto err_disable_pixclk; + + clk_disable_unprepare(csi2rx->p_clk); + + return 0; + +err_disable_pixclk: + for (; i >= 0; i--) + clk_disable_unprepare(csi2rx->pixel_clk[i]); + +err_disable_pclk: + clk_disable_unprepare(csi2rx->p_clk); + + return ret; +} + +static int csi2rx_stop(struct csi2rx_priv *csi2rx) +{ + unsigned int i; + + clk_prepare_enable(csi2rx->p_clk); + clk_disable_unprepare(csi2rx->sys_clk); + + for (i = 0; i < csi2rx->max_streams; i++) { + writel(0, csi2rx->base + CSI2RX_STREAM_CTRL_REG(i)); + + clk_disable_unprepare(csi2rx->pixel_clk[i]); + } + + clk_disable_unprepare(csi2rx->p_clk); + + return v4l2_subdev_call(csi2rx->source_subdev, video, s_stream, false); +} + +static int csi2rx_s_stream(struct v4l2_subdev *subdev, int enable) +{ + struct csi2rx_priv *csi2rx = v4l2_subdev_to_csi2rx(subdev); + int ret = 0; + + mutex_lock(&csi2rx->lock); + + if (enable) { + /* + * If we're not the first users, there's no need to + * enable the whole controller. + */ + if (!csi2rx->count) { + ret = csi2rx_start(csi2rx); + if (ret) + goto out; + } + + csi2rx->count++; + } else { + csi2rx->count--; + + /* + * Let the last user turn off the lights. + */ + if (!csi2rx->count) { + ret = csi2rx_stop(csi2rx); + if (ret) + goto out; + } + } + +out: + mutex_unlock(&csi2rx->lock); + return ret; +} + +static const struct v4l2_subdev_video_ops csi2rx_video_ops = { + .s_stream = csi2rx_s_stream, +}; + +static const struct v4l2_subdev_ops csi2rx_subdev_ops = { + .video = &csi2rx_video_ops, +}; + +static int csi2rx_async_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *s_subdev, + struct v4l2_async_subdev *asd) +{ + struct v4l2_subdev *subdev = notifier->sd; + struct csi2rx_priv *csi2rx = v4l2_subdev_to_csi2rx(subdev); + + csi2rx->source_pad = media_entity_get_fwnode_pad(&s_subdev->entity, + s_subdev->fwnode, + MEDIA_PAD_FL_SOURCE); + if (csi2rx->source_pad < 0) { + dev_err(csi2rx->dev, "Couldn't find output pad for subdev %s\n", + s_subdev->name); + return csi2rx->source_pad; + } + + csi2rx->source_subdev = s_subdev; + + dev_dbg(csi2rx->dev, "Bound %s pad: %d\n", s_subdev->name, + csi2rx->source_pad); + + return media_create_pad_link(&csi2rx->source_subdev->entity, + csi2rx->source_pad, + &csi2rx->subdev.entity, 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); +} + +static const struct v4l2_async_notifier_operations csi2rx_notifier_ops = { + .bound = csi2rx_async_bound, +}; + +static int csi2rx_get_resources(struct csi2rx_priv *csi2rx, + struct platform_device *pdev) +{ + struct resource *res; + unsigned char i; + u32 dev_cfg; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + csi2rx->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(csi2rx->base)) + return PTR_ERR(csi2rx->base); + + csi2rx->sys_clk = devm_clk_get(&pdev->dev, "sys_clk"); + if (IS_ERR(csi2rx->sys_clk)) { + dev_err(&pdev->dev, "Couldn't get sys clock\n"); + return PTR_ERR(csi2rx->sys_clk); + } + + csi2rx->p_clk = devm_clk_get(&pdev->dev, "p_clk"); + if (IS_ERR(csi2rx->p_clk)) { + dev_err(&pdev->dev, "Couldn't get P clock\n"); + return PTR_ERR(csi2rx->p_clk); + } + + csi2rx->dphy = devm_phy_optional_get(&pdev->dev, "dphy"); + if (IS_ERR(csi2rx->dphy)) { + dev_err(&pdev->dev, "Couldn't get external D-PHY\n"); + return PTR_ERR(csi2rx->dphy); + } + + /* + * FIXME: Once we'll have external D-PHY support, the check + * will need to be removed. + */ + if (csi2rx->dphy) { + dev_err(&pdev->dev, "External D-PHY not supported yet\n"); + return -EINVAL; + } + + clk_prepare_enable(csi2rx->p_clk); + dev_cfg = readl(csi2rx->base + CSI2RX_DEVICE_CFG_REG); + clk_disable_unprepare(csi2rx->p_clk); + + csi2rx->max_lanes = dev_cfg & 7; + if (csi2rx->max_lanes > CSI2RX_LANES_MAX) { + dev_err(&pdev->dev, "Invalid number of lanes: %u\n", + csi2rx->max_lanes); + return -EINVAL; + } + + csi2rx->max_streams = (dev_cfg >> 4) & 7; + if (csi2rx->max_streams > CSI2RX_STREAMS_MAX) { + dev_err(&pdev->dev, "Invalid number of streams: %u\n", + csi2rx->max_streams); + return -EINVAL; + } + + csi2rx->has_internal_dphy = dev_cfg & BIT(3) ? true : false; + + /* + * FIXME: Once we'll have internal D-PHY support, the check + * will need to be removed. + */ + if (csi2rx->has_internal_dphy) { + dev_err(&pdev->dev, "Internal D-PHY not supported yet\n"); + return -EINVAL; + } + + for (i = 0; i < csi2rx->max_streams; i++) { + char clk_name[16]; + + snprintf(clk_name, sizeof(clk_name), "pixel_if%u_clk", i); + csi2rx->pixel_clk[i] = devm_clk_get(&pdev->dev, clk_name); + if (IS_ERR(csi2rx->pixel_clk[i])) { + dev_err(&pdev->dev, "Couldn't get clock %s\n", clk_name); + return PTR_ERR(csi2rx->pixel_clk[i]); + } + } + + return 0; +} + +static int csi2rx_parse_dt(struct csi2rx_priv *csi2rx) +{ + struct v4l2_fwnode_endpoint v4l2_ep; + struct fwnode_handle *fwh; + struct device_node *ep; + int ret; + + ep = of_graph_get_endpoint_by_regs(csi2rx->dev->of_node, 0, 0); + if (!ep) + return -EINVAL; + + fwh = of_fwnode_handle(ep); + ret = v4l2_fwnode_endpoint_parse(fwh, &v4l2_ep); + if (ret) { + dev_err(csi2rx->dev, "Could not parse v4l2 endpoint\n"); + of_node_put(ep); + return ret; + } + + if (v4l2_ep.bus_type != V4L2_MBUS_CSI2) { + dev_err(csi2rx->dev, "Unsupported media bus type: 0x%x\n", + v4l2_ep.bus_type); + of_node_put(ep); + return -EINVAL; + } + + memcpy(csi2rx->lanes, v4l2_ep.bus.mipi_csi2.data_lanes, + sizeof(csi2rx->lanes)); + csi2rx->num_lanes = v4l2_ep.bus.mipi_csi2.num_data_lanes; + if (csi2rx->num_lanes > csi2rx->max_lanes) { + dev_err(csi2rx->dev, "Unsupported number of data-lanes: %d\n", + csi2rx->num_lanes); + of_node_put(ep); + return -EINVAL; + } + + csi2rx->asd.match.fwnode = fwnode_graph_get_remote_port_parent(fwh); + csi2rx->asd.match_type = V4L2_ASYNC_MATCH_FWNODE; + of_node_put(ep); + + csi2rx->notifier.subdevs = devm_kzalloc(csi2rx->dev, + sizeof(*csi2rx->notifier.subdevs), + GFP_KERNEL); + if (!csi2rx->notifier.subdevs) + return -ENOMEM; + + csi2rx->notifier.subdevs[0] = &csi2rx->asd; + csi2rx->notifier.num_subdevs = 1; + csi2rx->notifier.ops = &csi2rx_notifier_ops; + + return v4l2_async_subdev_notifier_register(&csi2rx->subdev, + &csi2rx->notifier); +} + +static int csi2rx_probe(struct platform_device *pdev) +{ + struct csi2rx_priv *csi2rx; + unsigned int i; + int ret; + + csi2rx = kzalloc(sizeof(*csi2rx), GFP_KERNEL); + if (!csi2rx) + return -ENOMEM; + platform_set_drvdata(pdev, csi2rx); + csi2rx->dev = &pdev->dev; + mutex_init(&csi2rx->lock); + + ret = csi2rx_get_resources(csi2rx, pdev); + if (ret) + goto err_free_priv; + + ret = csi2rx_parse_dt(csi2rx); + if (ret) + goto err_free_priv; + + csi2rx->subdev.owner = THIS_MODULE; + csi2rx->subdev.dev = &pdev->dev; + v4l2_subdev_init(&csi2rx->subdev, &csi2rx_subdev_ops); + v4l2_set_subdevdata(&csi2rx->subdev, &pdev->dev); + snprintf(csi2rx->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s.%s", + KBUILD_MODNAME, dev_name(&pdev->dev)); + + /* Create our media pads */ + csi2rx->subdev.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + csi2rx->pads[CSI2RX_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + for (i = CSI2RX_PAD_SOURCE_STREAM0; i < CSI2RX_PAD_MAX; i++) + csi2rx->pads[i].flags = MEDIA_PAD_FL_SOURCE; + + ret = media_entity_pads_init(&csi2rx->subdev.entity, CSI2RX_PAD_MAX, + csi2rx->pads); + if (ret) + goto err_free_priv; + + ret = v4l2_async_register_subdev(&csi2rx->subdev); + if (ret < 0) + goto err_free_priv; + + dev_info(&pdev->dev, + "Probed CSI2RX with %u/%u lanes, %u streams, %s D-PHY\n", + csi2rx->num_lanes, csi2rx->max_lanes, csi2rx->max_streams, + csi2rx->has_internal_dphy ? "internal" : "no"); + + return 0; + +err_free_priv: + kfree(csi2rx); + return ret; +} + +static int csi2rx_remove(struct platform_device *pdev) +{ + struct csi2rx_priv *csi2rx = platform_get_drvdata(pdev); + + v4l2_async_unregister_subdev(&csi2rx->subdev); + kfree(csi2rx); + + return 0; +} + +static const struct of_device_id csi2rx_of_table[] = { + { .compatible = "cdns,csi2rx" }, + { }, +}; +MODULE_DEVICE_TABLE(of, csi2rx_of_table); + +static struct platform_driver csi2rx_driver = { + .probe = csi2rx_probe, + .remove = csi2rx_remove, + + .driver = { + .name = "cdns-csi2rx", + .of_match_table = csi2rx_of_table, + }, +}; +module_platform_driver(csi2rx_driver); +MODULE_AUTHOR("Maxime Ripard "); +MODULE_DESCRIPTION("Cadence CSI2-RX controller"); +MODULE_LICENSE("GPL"); -- 2.17.0