From: "SZ Lin (林上智)" <sz.lin@moxa.com> To: y@localhost Cc: "SZ Lin (林上智)" <sz.lin@moxa.com>, stable <stable@vger.kernel.org>, "Johan Hovold" <johan@kernel.org>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH] USB: serial: option: adding support for ublox R410M Date: Thu, 26 Apr 2018 14:28:31 +0800 [thread overview] Message-ID: <20180426062831.320-1-sz.lin@moxa.com> (raw) This patch adds support for ublox R410M PID 0x90b2 USB modem to option driver, this module supports LTE Cat M1 / NB1. Interface layout: 0: QCDM/DIAG 1: ADB 2: AT 3: RMNET Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Cc: stable <stable@vger.kernel.org> --- Please refer to following lsusb output: Bus 001 Device 003: ID 05c6:90b2 Qualcomm, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05c6 Qualcomm, Inc. idProduct 0x90b2 bcdDevice 0.00 iManufacturer 3 Qualcomm, Incorporated iProduct 2 Qualcomm CDMA Technologies MSM iSerial 4 fb854106 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 108 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 1 Qualcomm Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f0c3612467a3..184691caee64 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -233,6 +233,8 @@ static void option_instat_callback(struct urb *urb); /* These Quectel products use Qualcomm's vendor ID */ #define QUECTEL_PRODUCT_UC20 0x9003 #define QUECTEL_PRODUCT_UC15 0x9090 +/* These ublox products use Qualcomm's vendor ID */ +#define UBLOX_PRODUCT_R410M 0x90b2 /* These Yuga products use Qualcomm's vendor ID */ #define YUGA_PRODUCT_CLM920_NC5 0x9625 @@ -1065,6 +1067,9 @@ static const struct usb_device_id option_ids[] = { /* Yuga products use Qualcomm vendor ID */ { USB_DEVICE(QUALCOMM_VENDOR_ID, YUGA_PRODUCT_CLM920_NC5), .driver_info = RSVD(1) | RSVD(4) }, + /* ublox products use Qualcomm vendor ID */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M), + .driver_info = RSVD(1) | RSVD(3) }, /* Quectel products using Quectel vendor ID */ { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21), .driver_info = RSVD(4) }, -- 2.17.0
WARNING: multiple messages have this Message-ID (diff)
From: SZ Lin <sz.lin@moxa.com> To: y@codeaurora.org Cc: "SZ Lin (林上智)" <sz.lin@moxa.com>, stable <stable@vger.kernel.org>, "Johan Hovold" <johan@kernel.org>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Subject: USB: serial: option: adding support for ublox R410M Date: Thu, 26 Apr 2018 14:28:31 +0800 [thread overview] Message-ID: <20180426062831.320-1-sz.lin@moxa.com> (raw) This patch adds support for ublox R410M PID 0x90b2 USB modem to option driver, this module supports LTE Cat M1 / NB1. Interface layout: 0: QCDM/DIAG 1: ADB 2: AT 3: RMNET Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Cc: stable <stable@vger.kernel.org> --- Please refer to following lsusb output: Bus 001 Device 003: ID 05c6:90b2 Qualcomm, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05c6 Qualcomm, Inc. idProduct 0x90b2 bcdDevice 0.00 iManufacturer 3 Qualcomm, Incorporated iProduct 2 Qualcomm CDMA Technologies MSM iSerial 4 fb854106 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 108 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 1 Qualcomm Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f0c3612467a3..184691caee64 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -233,6 +233,8 @@ static void option_instat_callback(struct urb *urb); /* These Quectel products use Qualcomm's vendor ID */ #define QUECTEL_PRODUCT_UC20 0x9003 #define QUECTEL_PRODUCT_UC15 0x9090 +/* These ublox products use Qualcomm's vendor ID */ +#define UBLOX_PRODUCT_R410M 0x90b2 /* These Yuga products use Qualcomm's vendor ID */ #define YUGA_PRODUCT_CLM920_NC5 0x9625 @@ -1065,6 +1067,9 @@ static const struct usb_device_id option_ids[] = { /* Yuga products use Qualcomm vendor ID */ { USB_DEVICE(QUALCOMM_VENDOR_ID, YUGA_PRODUCT_CLM920_NC5), .driver_info = RSVD(1) | RSVD(4) }, + /* ublox products use Qualcomm vendor ID */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M), + .driver_info = RSVD(1) | RSVD(3) }, /* Quectel products using Quectel vendor ID */ { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21), .driver_info = RSVD(4) },
next reply other threads:[~2018-04-26 6:28 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-04-26 6:28 SZ Lin (林上智) [this message] 2018-04-26 6:28 ` USB: serial: option: adding support for ublox R410M SZ Lin 2018-04-26 7:09 ` [PATCH] " Johan Hovold 2018-04-26 7:09 ` Johan Hovold 2018-04-26 7:48 ` [PATCH] " Lars Melin 2018-04-26 7:48 ` Lars Melin 2018-04-26 8:14 ` [PATCH] " Johan Hovold 2018-04-26 8:14 ` Johan Hovold 2018-04-26 11:19 ` [PATCH] " Bjørn Mork 2018-04-26 11:19 ` Bjørn Mork 2018-04-26 11:39 ` [PATCH] " Lars Melin 2018-04-26 11:39 ` Lars Melin 2018-04-26 11:40 ` [PATCH] " Lars Melin 2018-04-26 11:40 ` Lars Melin 2018-04-26 16:12 ` [PATCH] " Johan Hovold 2018-04-26 16:12 ` Johan Hovold 2018-04-26 16:12 ` [PATCH] " Johan Hovold 2018-04-26 16:22 ` Lars Melin 2018-04-26 16:22 ` Lars Melin 2018-04-26 16:29 ` [PATCH] " Johan Hovold 2018-04-26 16:29 ` Johan Hovold 2018-04-26 16:29 ` [PATCH] " Johan Hovold 2018-04-26 19:12 ` Dan Williams 2018-04-26 19:12 ` Dan Williams 2018-04-27 2:14 ` [PATCH] " SZ Lin (林上智) 2018-04-27 2:14 ` SZ Lin 2018-05-02 7:22 ` [PATCH] " Johan Hovold 2018-05-02 7:22 ` Johan Hovold
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180426062831.320-1-sz.lin@moxa.com \ --to=sz.lin@moxa.com \ --cc=gregkh@linuxfoundation.org \ --cc=johan@kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=stable@vger.kernel.org \ --cc=y@localhost \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.