* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-04-27 13:02 Jagan Teki
2018-04-29 21:05 ` Tom Rini
2018-04-30 16:15 ` Tom Rini
0 siblings, 2 replies; 125+ messages in thread
From: Jagan Teki @ 2018-04-27 13:02 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit 275d80a4c2fb63890f3f4c16b7ad481064e650a0:
Merge git://git.denx.de/u-boot-usb (2018-04-22 09:30:36 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 5ff8e54888e4d26a352453564f7f599d29696dc9:
sunxi: improve throughput in the sunxi_mmc driver (2018-04-25 10:29:38 +0530)
----------------------------------------------------------------
Philipp Tomsich (1):
sunxi: improve throughput in the sunxi_mmc driver
Stefan Mavrodiev (1):
sunxi: mmc: Fix phase delays
drivers/mmc/sunxi_mmc.c | 35 ++++++++++++++++++++---------------
1 file changed, 20 insertions(+), 15 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-04-27 13:02 [U-Boot] Pull request: u-boot-sunxi/master Jagan Teki
@ 2018-04-29 21:05 ` Tom Rini
2018-04-30 10:39 ` Jagan Teki
2018-04-30 16:15 ` Tom Rini
1 sibling, 1 reply; 125+ messages in thread
From: Tom Rini @ 2018-04-29 21:05 UTC (permalink / raw)
To: u-boot
On Fri, Apr 27, 2018 at 06:32:53PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit 275d80a4c2fb63890f3f4c16b7ad481064e650a0:
>
> Merge git://git.denx.de/u-boot-usb (2018-04-22 09:30:36 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 5ff8e54888e4d26a352453564f7f599d29696dc9:
>
> sunxi: improve throughput in the sunxi_mmc driver (2018-04-25 10:29:38 +0530)
>
> ----------------------------------------------------------------
> Philipp Tomsich (1):
> sunxi: improve throughput in the sunxi_mmc driver
>
> Stefan Mavrodiev (1):
> sunxi: mmc: Fix phase delays
>
> drivers/mmc/sunxi_mmc.c | 35 ++++++++++++++++++++---------------
> 1 file changed, 20 insertions(+), 15 deletions(-)
Please re-push on your side, git is unhappy:
$ git pull git://git.denx.de/u-boot-sunxi.git
remote: error: Could not read 275d80a4c2fb63890f3f4c16b7ad481064e650a0
remote: fatal: revision walk setup failed
remote: aborting due to possible repository corruption on the remote side.
fatal: protocol error: bad pack header
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180429/9b8b6234/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-04-29 21:05 ` Tom Rini
@ 2018-04-30 10:39 ` Jagan Teki
0 siblings, 0 replies; 125+ messages in thread
From: Jagan Teki @ 2018-04-30 10:39 UTC (permalink / raw)
To: u-boot
On Mon, Apr 30, 2018 at 2:35 AM, Tom Rini <trini@konsulko.com> wrote:
> On Fri, Apr 27, 2018 at 06:32:53PM +0530, Jagan Teki wrote:
>
>> Hi Tom,
>>
>> Please pull this PR.
>>
>> thanks,
>> Jagan.
>>
>> The following changes since commit 275d80a4c2fb63890f3f4c16b7ad481064e650a0:
>>
>> Merge git://git.denx.de/u-boot-usb (2018-04-22 09:30:36 -0400)
>>
>> are available in the Git repository at:
>>
>> git://git.denx.de/u-boot-sunxi.git master
>>
>> for you to fetch changes up to 5ff8e54888e4d26a352453564f7f599d29696dc9:
>>
>> sunxi: improve throughput in the sunxi_mmc driver (2018-04-25 10:29:38 +0530)
>>
>> ----------------------------------------------------------------
>> Philipp Tomsich (1):
>> sunxi: improve throughput in the sunxi_mmc driver
>>
>> Stefan Mavrodiev (1):
>> sunxi: mmc: Fix phase delays
>>
>> drivers/mmc/sunxi_mmc.c | 35 ++++++++++++++++++++---------------
>> 1 file changed, 20 insertions(+), 15 deletions(-)
>
> Please re-push on your side, git is unhappy:
done, please try again.
--
Jagan
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-04-27 13:02 [U-Boot] Pull request: u-boot-sunxi/master Jagan Teki
2018-04-29 21:05 ` Tom Rini
@ 2018-04-30 16:15 ` Tom Rini
1 sibling, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-04-30 16:15 UTC (permalink / raw)
To: u-boot
On Fri, Apr 27, 2018 at 06:32:53PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit 275d80a4c2fb63890f3f4c16b7ad481064e650a0:
>
> Merge git://git.denx.de/u-boot-usb (2018-04-22 09:30:36 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 5ff8e54888e4d26a352453564f7f599d29696dc9:
>
> sunxi: improve throughput in the sunxi_mmc driver (2018-04-25 10:29:38 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180430/c301413e/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-10-26 17:48 Jagan Teki
@ 2019-10-30 17:01 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2019-10-30 17:01 UTC (permalink / raw)
To: u-boot
On Sat, Oct 26, 2019 at 11:18:47PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> Summary:
> - H6 dts(i) sync (Clément)
> - H6 PIO (Icenowy)
> - Fix pll1 clock calculation (Stefan)
> - H6 dram, half DQ (Jernej)
> - A64 OLinuXino eMMC (Sunil)
>
> Travis-CI:
> https://travis-ci.org/openedev/u-boot-amarula/builds/602715052
>
> Thanks,
> Jagan.
>
> The following changes since commit 395ec7418695e5ce23f8b48c01a1dbffd2e52d3f:
>
> spi-nor-ids: Add support for Adesto AT25SL321 (2019-10-25 00:48:32 +0530)
>
> are available in the Git repository at:
>
> https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi master
>
> for you to fetch changes up to 5f19c9302133cda54d5d1a6b1caa400260de9192:
>
> sunxi: set PIO voltage to hardware-detected value on startup on H6 (2019-10-25 14:40:34 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191030/4f1ad922/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-10-26 17:48 Jagan Teki
2019-10-30 17:01 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-10-26 17:48 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
Summary:
- H6 dts(i) sync (Clément)
- H6 PIO (Icenowy)
- Fix pll1 clock calculation (Stefan)
- H6 dram, half DQ (Jernej)
- A64 OLinuXino eMMC (Sunil)
Travis-CI:
https://travis-ci.org/openedev/u-boot-amarula/builds/602715052
Thanks,
Jagan.
The following changes since commit 395ec7418695e5ce23f8b48c01a1dbffd2e52d3f:
spi-nor-ids: Add support for Adesto AT25SL321 (2019-10-25 00:48:32 +0530)
are available in the Git repository at:
https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi master
for you to fetch changes up to 5f19c9302133cda54d5d1a6b1caa400260de9192:
sunxi: set PIO voltage to hardware-detected value on startup on H6 (2019-10-25 14:40:34 +0530)
----------------------------------------------------------------
Clément Péron (1):
arm: dts: sync dts for Allwinner H6
Icenowy Zheng (1):
sunxi: set PIO voltage to hardware-detected value on startup on H6
Jernej Skrabec (1):
sunxi: H6: DRAM: Add support for half DQ
Stefan Mavrodiev (1):
sunxi: Fix pll1 clock calculation
Sunil Mohan Adapa (1):
arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun50i-a64-olinuxino-emmc.dts | 23 +++++++
arch/arm/dts/sun50i-h6-beelink-gs1.dts | 76 +++++++++++++++++++++++
arch/arm/dts/sun50i-h6-pine-h64.dts | 12 ++++
arch/arm/dts/sun50i-h6.dtsi | 46 +++++++++++++-
arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h | 1 +
arch/arm/include/asm/arch-sunxi/gpio.h | 3 +
arch/arm/mach-sunxi/board.c | 9 +++
arch/arm/mach-sunxi/clock_sun6i.c | 2 +-
arch/arm/mach-sunxi/dram_sun50i_h6.c | 78 ++++++++++++++++--------
board/sunxi/MAINTAINERS | 5 ++
configs/a64-olinuxino-emmc_defconfig | 17 ++++++
12 files changed, 244 insertions(+), 29 deletions(-)
create mode 100644 arch/arm/dts/sun50i-a64-olinuxino-emmc.dts
create mode 100644 configs/a64-olinuxino-emmc_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-07-16 14:59 Jagan Teki
@ 2019-07-17 12:27 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2019-07-17 12:27 UTC (permalink / raw)
To: u-boot
On Tue, Jul 16, 2019 at 08:29:57PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> Summary:
> - Beelink-x2 STB support (Marcus)
> - H6 DDR3, LPDDR3 changes (Andre, Jernej)
> - H6 pin controller, USB PHY (Andre)
>
> thanks,
> Jagan.
>
> The following changes since commit 6070ef409c1018860e8dd1f077297546d9d80115:
>
> Merge branch '2019-07-12-master-imports' (2019-07-14 09:05:20 -0400)
>
> are available in the Git repository at:
>
> https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi master
>
> for you to fetch changes up to f96238e253661b43168352010a2628957940bd4b:
>
> sunxi: H6: Enable USB for existing boards (2019-07-16 17:13:15 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190717/7d9e6f98/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-07-16 14:59 Jagan Teki
2019-07-17 12:27 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-07-16 14:59 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
Summary:
- Beelink-x2 STB support (Marcus)
- H6 DDR3, LPDDR3 changes (Andre, Jernej)
- H6 pin controller, USB PHY (Andre)
thanks,
Jagan.
The following changes since commit 6070ef409c1018860e8dd1f077297546d9d80115:
Merge branch '2019-07-12-master-imports' (2019-07-14 09:05:20 -0400)
are available in the Git repository at:
https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi master
for you to fetch changes up to f96238e253661b43168352010a2628957940bd4b:
sunxi: H6: Enable USB for existing boards (2019-07-16 17:13:15 +0530)
----------------------------------------------------------------
Andre Przywara (11):
sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig
sunxi: H6: DRAM: avoid memcpy() on MMIO registers
sunxi: H6: DRAM: follow recommended PHY init algorithm
sunxi: H6: move LPDDR3 timing definition into separate file
sunxi: H6: Add DDR3 support to DRAM controller driver
sunxi: H6: Add DDR3-1333 timings
sunxi: move SUNXI_GPIO to Kconfig
sunxi: gpio: Enable support for H6 pin controller
sunxi: clocks: Add H6 USB clock gates and resets
sunxi: phy: Add USB PHY support for Allwinner H6
sunxi: H6: Enable USB for existing boards
Jernej Skrabec (1):
sunxi: H6: Add DDR3 DRAM delay values
Marcus Cooper (1):
sun8i: h3: Add support for the Beelink-x2 STB
arch/arm/Kconfig | 1 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun8i-h3-beelink-x2.dts | 216 +++++++++++++++++++
arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h | 35 ++++
arch/arm/mach-sunxi/Kconfig | 19 +-
arch/arm/mach-sunxi/Makefile | 1 +
arch/arm/mach-sunxi/dram_sun50i_h6.c | 251 +++++++----------------
arch/arm/mach-sunxi/dram_timings/Makefile | 2 +
arch/arm/mach-sunxi/dram_timings/h6_ddr3_1333.c | 144 +++++++++++++
arch/arm/mach-sunxi/dram_timings/h6_lpddr3.c | 132 ++++++++++++
board/sunxi/MAINTAINERS | 6 +
common/spl/Kconfig | 3 +
configs/A10-OLinuXino-Lime_defconfig | 1 -
configs/A10s-OLinuXino-M_defconfig | 1 -
configs/A13-OLinuXinoM_defconfig | 1 -
configs/A13-OLinuXino_defconfig | 1 -
configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 -
configs/A20-OLinuXino-Lime2_defconfig | 1 -
configs/A20-OLinuXino-Lime_defconfig | 1 -
configs/A20-OLinuXino_MICRO-eMMC_defconfig | 1 -
configs/A20-OLinuXino_MICRO_defconfig | 1 -
configs/A20-Olimex-SOM-EVB_defconfig | 1 -
configs/A20-Olimex-SOM204-EVB-eMMC_defconfig | 1 -
configs/A20-Olimex-SOM204-EVB_defconfig | 1 -
configs/A33-OLinuXino_defconfig | 1 -
configs/Ainol_AW1_defconfig | 1 -
configs/Ampe_A76_defconfig | 1 -
configs/Auxtek-T003_defconfig | 1 -
configs/Auxtek-T004_defconfig | 1 -
configs/Bananapi_M2_Ultra_defconfig | 1 -
configs/Bananapi_defconfig | 1 -
configs/Bananapi_m2m_defconfig | 1 -
configs/Bananapro_defconfig | 1 -
configs/CHIP_defconfig | 1 -
configs/CHIP_pro_defconfig | 1 -
configs/CSQ_CS908_defconfig | 1 -
configs/Chuwi_V7_CW0825_defconfig | 1 -
configs/Colombus_defconfig | 1 -
configs/Cubieboard2_defconfig | 1 -
configs/Cubieboard4_defconfig | 1 -
configs/Cubieboard_defconfig | 1 -
configs/Cubietruck_defconfig | 1 -
configs/Cubietruck_plus_defconfig | 1 -
configs/Empire_electronix_d709_defconfig | 1 -
configs/Empire_electronix_m712_defconfig | 1 -
configs/Hummingbird_A31_defconfig | 1 -
configs/Hyundai_A7HD_defconfig | 1 -
configs/Itead_Ibox_A20_defconfig | 1 -
configs/Lamobo_R1_defconfig | 1 -
configs/LicheePi_Zero_defconfig | 1 -
configs/Linksprite_pcDuino3_Nano_defconfig | 1 -
configs/Linksprite_pcDuino3_defconfig | 1 -
configs/Linksprite_pcDuino_defconfig | 1 -
configs/MK808C_defconfig | 1 -
configs/MSI_Primo73_defconfig | 1 -
configs/MSI_Primo81_defconfig | 1 -
configs/Marsboard_A10_defconfig | 1 -
configs/Mele_A1000G_quad_defconfig | 1 -
configs/Mele_A1000_defconfig | 1 -
configs/Mele_I7_defconfig | 1 -
configs/Mele_M3_defconfig | 1 -
configs/Mele_M5_defconfig | 1 -
configs/Mele_M9_defconfig | 1 -
configs/Merrii_A80_Optimus_defconfig | 1 -
configs/Mini-X_defconfig | 1 -
configs/Nintendo_NES_Classic_Edition_defconfig | 1 -
configs/Orangepi_defconfig | 1 -
configs/Orangepi_mini_defconfig | 1 -
configs/Sinlinx_SinA31s_defconfig | 1 -
configs/Sinlinx_SinA33_defconfig | 1 -
configs/Sinovoip_BPI_M2_defconfig | 1 -
configs/Sinovoip_BPI_M3_defconfig | 1 -
configs/Sunchip_CX-A99_defconfig | 1 -
configs/UTOO_P66_defconfig | 1 -
configs/Wexler_TAB7200_defconfig | 1 -
configs/Wits_Pro_A20_DKT_defconfig | 1 -
configs/Wobo_i5_defconfig | 1 -
configs/Yones_Toptech_BD1078_defconfig | 1 -
configs/Yones_Toptech_BS1078_V2_defconfig | 1 -
configs/a64-olinuxino_defconfig | 1 -
configs/amarula_a64_relic_defconfig | 1 -
configs/ba10_tv_box_defconfig | 1 -
configs/bananapi_m1_plus_defconfig | 1 -
configs/bananapi_m2_berry_defconfig | 1 -
configs/bananapi_m2_plus_h3_defconfig | 1 -
configs/bananapi_m2_plus_h5_defconfig | 1 -
configs/bananapi_m2_zero_defconfig | 1 -
configs/bananapi_m64_defconfig | 1 -
configs/beelink_gs1_defconfig | 4 +-
configs/beelink_x2_defconfig | 16 ++
configs/colorfly_e708_q1_defconfig | 1 -
configs/difrnce_dit4350_defconfig | 1 -
configs/dserve_dsrv9703c_defconfig | 1 -
configs/emlid_neutis_n5_devboard_defconfig | 1 -
configs/ga10h_v1_1_defconfig | 1 -
configs/gt90h_v4_defconfig | 1 -
configs/h8_homlet_v2_defconfig | 1 -
configs/i12-tvbox_defconfig | 1 -
configs/iNet_3F_defconfig | 1 -
configs/iNet_3W_defconfig | 1 -
configs/iNet_86VS_defconfig | 1 -
configs/iNet_D978_rev2_defconfig | 1 -
configs/icnova-a20-swac_defconfig | 1 -
configs/inet1_defconfig | 1 -
configs/inet86dz_defconfig | 1 -
configs/inet97fv2_defconfig | 1 -
configs/inet98v_rev2_defconfig | 1 -
configs/inet9f_rev03_defconfig | 1 -
configs/inet_q972_defconfig | 1 -
configs/jesurun_q5_defconfig | 1 -
configs/libretech_all_h3_cc_h2_plus_defconfig | 1 -
configs/libretech_all_h3_cc_h3_defconfig | 1 -
configs/libretech_all_h3_cc_h5_defconfig | 1 -
configs/mixtile_loftq_defconfig | 1 -
configs/mk802_a10s_defconfig | 1 -
configs/mk802_defconfig | 1 -
configs/mk802ii_defconfig | 1 -
configs/nanopi_a64_defconfig | 1 -
configs/nanopi_m1_defconfig | 1 -
configs/nanopi_m1_plus_defconfig | 1 -
configs/nanopi_neo2_defconfig | 1 -
configs/nanopi_neo_air_defconfig | 1 -
configs/nanopi_neo_defconfig | 1 -
configs/nanopi_neo_plus2_defconfig | 1 -
configs/oceanic_5205_5inmfd_defconfig | 1 -
configs/orangepi_2_defconfig | 1 -
configs/orangepi_lite2_defconfig | 4 +-
configs/orangepi_lite_defconfig | 1 -
configs/orangepi_one_defconfig | 1 -
configs/orangepi_one_plus_defconfig | 4 +-
configs/orangepi_pc2_defconfig | 1 -
configs/orangepi_pc_defconfig | 1 -
configs/orangepi_pc_plus_defconfig | 1 -
configs/orangepi_plus2e_defconfig | 1 -
configs/orangepi_plus_defconfig | 1 -
configs/orangepi_prime_defconfig | 1 -
configs/orangepi_r1_defconfig | 1 -
configs/orangepi_win_defconfig | 1 -
configs/orangepi_zero_defconfig | 1 -
configs/orangepi_zero_plus2_defconfig | 1 -
configs/orangepi_zero_plus_defconfig | 1 -
configs/parrot_r16_defconfig | 1 -
configs/pine64-lts_defconfig | 1 -
configs/pine64_plus_defconfig | 1 -
configs/pine_h64_defconfig | 5 +-
configs/pinebook_defconfig | 1 -
configs/polaroid_mid2407pxe03_defconfig | 1 -
configs/polaroid_mid2809pxe04_defconfig | 1 -
configs/pov_protab2_ips9_defconfig | 1 -
configs/q8_a13_tablet_defconfig | 1 -
configs/q8_a23_tablet_800x480_defconfig | 1 -
configs/q8_a33_tablet_1024x600_defconfig | 1 -
configs/q8_a33_tablet_800x480_defconfig | 1 -
configs/r7-tv-dongle_defconfig | 1 -
configs/sopine_baseboard_defconfig | 1 -
configs/sun8i_a23_evb_defconfig | 1 -
configs/sunxi_Gemei_G9_defconfig | 1 -
configs/tbs_a711_defconfig | 1 -
configs/teres_i_defconfig | 1 -
drivers/clk/sunxi/clk_h6.c | 29 +++
drivers/gpio/Kconfig | 6 +
drivers/gpio/sunxi_gpio.c | 2 +
drivers/phy/allwinner/phy-sun4i-usb.c | 20 ++
include/configs/sunxi-common.h | 3 -
scripts/config_whitelist.txt | 1 -
165 files changed, 719 insertions(+), 328 deletions(-)
create mode 100644 arch/arm/dts/sun8i-h3-beelink-x2.dts
create mode 100644 arch/arm/mach-sunxi/dram_timings/h6_ddr3_1333.c
create mode 100644 arch/arm/mach-sunxi/dram_timings/h6_lpddr3.c
create mode 100644 configs/beelink_x2_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-05-20 17:15 Jagan Teki
@ 2019-05-21 15:44 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2019-05-21 15:44 UTC (permalink / raw)
To: u-boot
On Mon, May 20, 2019 at 10:45:06PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> Summary:
> - H6 WDT reset fix (Clément)
> - H6 SPL_TEXT_BASE fixes (Clément, Jonas)
> - NPI-M1+ emac enablment (Emmanuel)
>
> The following changes since commit 5b4b680cfe29a67171ccbe439c66374cb31faca3:
>
> Prepare v2019.07-rc2 (2019-05-15 15:58:48 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to c598c4837d782f6d9481f4be07ae5d679c6df976:
>
> sun8i: h3: NanoPi M1 Plus: Add emac configuration (2019-05-20 22:37:35 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190521/c4dabe69/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-05-20 17:15 Jagan Teki
2019-05-21 15:44 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-05-20 17:15 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
Summary:
- H6 WDT reset fix (Clément)
- H6 SPL_TEXT_BASE fixes (Clément, Jonas)
- NPI-M1+ emac enablment (Emmanuel)
The following changes since commit 5b4b680cfe29a67171ccbe439c66374cb31faca3:
Prepare v2019.07-rc2 (2019-05-15 15:58:48 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to c598c4837d782f6d9481f4be07ae5d679c6df976:
sun8i: h3: NanoPi M1 Plus: Add emac configuration (2019-05-20 22:37:35 +0530)
----------------------------------------------------------------
Clément Péron (2):
arm: sunxi: h6: fix reset using r_wdog
sun50i: h6: Fix Beelink GS1 board config
Emmanuel Vadot (1):
sun8i: h3: NanoPi M1 Plus: Add emac configuration
Jonas Smedegaard (1):
sun50i: a64: teres_i: Fix broken SPL_TEXT_BASE
arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h | 1 +
arch/arm/mach-sunxi/board.c | 9 +++++++--
configs/beelink_gs1_defconfig | 1 +
configs/nanopi_m1_plus_defconfig | 2 ++
configs/teres_i_defconfig | 1 +
5 files changed, 12 insertions(+), 2 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-04-27 21:46 ` Tom Rini
@ 2019-04-29 17:14 ` Jagan Teki
0 siblings, 0 replies; 125+ messages in thread
From: Jagan Teki @ 2019-04-29 17:14 UTC (permalink / raw)
To: u-boot
On Sun, Apr 28, 2019 at 3:16 AM Tom Rini <trini@konsulko.com> wrote:
>
> On Sat, Apr 27, 2019 at 09:47:21PM +0530, Jagan Teki wrote:
> > Hi Tom,
> >
> > Please pull this PR.
> >
> > Summary:
> > - H6 Beelink GS1 board (Clément)
> > - Olimex A64-Teres-I board (Jonas)
> > - sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej)
> > - _relaxed MMIO (Andre)
>
> NAK, this MMIO change (and readl/writel) stuff is causing tons of
> warnings on arm32. km_kirkwood_128m16 is the first platform of many.
> Thanks!
I didn't notice since, my test was on arm64 targets, will send v2, thanks.
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-04-27 16:17 Jagan Teki
@ 2019-04-27 21:46 ` Tom Rini
2019-04-29 17:14 ` Jagan Teki
0 siblings, 1 reply; 125+ messages in thread
From: Tom Rini @ 2019-04-27 21:46 UTC (permalink / raw)
To: u-boot
On Sat, Apr 27, 2019 at 09:47:21PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> Summary:
> - H6 Beelink GS1 board (Clément)
> - Olimex A64-Teres-I board (Jonas)
> - sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej)
> - _relaxed MMIO (Andre)
NAK, this MMIO change (and readl/writel) stuff is causing tons of
warnings on arm32. km_kirkwood_128m16 is the first platform of many.
Thanks!
>
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190427/ab481466/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-04-27 16:17 Jagan Teki
2019-04-27 21:46 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-04-27 16:17 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
Summary:
- H6 Beelink GS1 board (Clément)
- Olimex A64-Teres-I board (Jonas)
- sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej)
- _relaxed MMIO (Andre)
- EPHY clock changes(Jagan)
The following changes since commit 1f4ae66eaab29bfb5d1eb44996f7826c9cd01ed1:
Merge tag 'arc-for-2019.07' of git://git.denx.de/u-boot-arc (2019-04-18 12:12:16 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to f93369fb348488298467e4efcc34ba538da77b74:
sunxi: H6: use writel_relaxed for DRAM timing register accesses (2019-04-27 21:32:37 +0530)
----------------------------------------------------------------
Andre Przywara (3):
arm: clean up asm/io.h
arm: introduce _relaxed MMIO accessors
sunxi: H6: use writel_relaxed for DRAM timing register accesses
Clément Péron (1):
arm: dts: h6: Add Beelink GS1 initial support
Jagan Teki (6):
clk: Get the CLK by index without device
clk: Use clk_get_by_index_tail()
test/dm: clk: Add clk_get_by_index[_nodev] test
reset: Get the RESET by index without device
test/dm: reset: Add reset_get_by_index[_nodev] test
net: sun8i_emac: Add EPHY CLK and RESET support
Jonas Smedegaard (1):
sun50i: a64: Add Olimex A64-Teres-I board initial support
Ondrej Jirman (1):
sunxi: Fix build when CONFIG_CMD_PXE or CONFIG_CMD_DHCP are disabled
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi | 41 +++++
arch/arm/dts/sun50i-a64-teres-i.dts | 270 ++++++++++++++++++++++++++++
arch/arm/dts/sun50i-h6-beelink-gs1.dts | 184 +++++++++++++++++++
arch/arm/include/asm/io.h | 164 ++---------------
arch/arm/mach-sunxi/dram_sun50i_h6.c | 79 ++++----
board/sunxi/MAINTAINERS | 12 ++
configs/beelink_gs1_defconfig | 15 ++
configs/teres_i_defconfig | 22 +++
drivers/clk/clk-uclass.c | 75 ++++++--
drivers/net/sun8i_emac.c | 74 ++++++--
drivers/reset/reset-uclass.c | 53 ++++--
include/clk.h | 15 ++
include/configs/sunxi-common.h | 16 +-
include/reset.h | 16 ++
test/dm/clk.c | 21 +++
test/dm/reset.c | 23 +++
17 files changed, 840 insertions(+), 244 deletions(-)
create mode 100644 arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi
create mode 100644 arch/arm/dts/sun50i-a64-teres-i.dts
create mode 100644 arch/arm/dts/sun50i-h6-beelink-gs1.dts
create mode 100644 configs/beelink_gs1_defconfig
create mode 100644 configs/teres_i_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-04-17 12:27 Jagan Teki
@ 2019-04-18 16:20 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2019-04-18 16:20 UTC (permalink / raw)
To: u-boot
On Wed, Apr 17, 2019 at 05:57:31PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> Summary:
> - Convert DM_MMC and DM_SCSI
> - A20, R40, H6 Linux dts(i) sync
> - CLK, RESET support for sunxi, sun8_emac net drivers
>
> thanks,
> Jagan.
>
> The following changes since commit 216800acf1fbf9f498455bf3c92d4513d9a4c681:
>
> Merge branch 'master' of git://git.denx.de/u-boot-spi (2019-04-14 00:03:06 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to f8c8669760610b2949d8d9ccaeef8231a44d4205:
>
> sunxi: update SATA driver to always use DM_SCSI (2019-04-17 14:34:45 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190418/37cdb293/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-04-17 12:27 Jagan Teki
2019-04-18 16:20 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-04-17 12:27 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
Summary:
- Convert DM_MMC and DM_SCSI
- A20, R40, H6 Linux dts(i) sync
- CLK, RESET support for sunxi, sun8_emac net drivers
thanks,
Jagan.
The following changes since commit 216800acf1fbf9f498455bf3c92d4513d9a4c681:
Merge branch 'master' of git://git.denx.de/u-boot-spi (2019-04-14 00:03:06 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to f8c8669760610b2949d8d9ccaeef8231a44d4205:
sunxi: update SATA driver to always use DM_SCSI (2019-04-17 14:34:45 +0530)
----------------------------------------------------------------
Andre Przywara (1):
sunxi: update SATA driver to always use DM_SCSI
Jagan Teki (13):
arm64: allwinner: sun50i: Sync H6 dts(i) files from Linux
clk: sunxi: r40: Fix GMAC reset reg offset
net: sunxi_emac: Add CLK support
net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle
net: sun8i_emac: Add CLK and RESET support
board: sunxi: gmac: Remove Ethernet clock and reset
arm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
board: sunxi: Add R40 sata compatible
ARM: dts: a20-m5: Enable AHCI
ARM: dts: a20-wits-pro-a20-dkt: Enable AHCI
ARM: dts: sun8i-r40-bananapi-m2-berry: Enable AHCI
arm: sunxi: Enable DM_MMC and DM_SCSI
arch/arm/Kconfig | 2 +
arch/arm/dts/sun50i-h6-orangepi.dtsi | 62 +++-
arch/arm/dts/sun50i-h6-pine-h64.dts | 88 ++++-
arch/arm/dts/sun50i-h6.dtsi | 398 ++++++++++++++++++++-
arch/arm/dts/sun7i-a20-ainol-aw1.dts | 2 +-
arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts | 46 +--
arch/arm/dts/sun7i-a20-bananapi.dts | 49 +--
arch/arm/dts/sun7i-a20-bananapro.dts | 65 +---
arch/arm/dts/sun7i-a20-cubieboard2.dts | 21 +-
arch/arm/dts/sun7i-a20-cubietruck.dts | 83 ++---
arch/arm/dts/sun7i-a20-hummingbird.dts | 60 +---
arch/arm/dts/sun7i-a20-i12-tvbox.dts | 47 +--
arch/arm/dts/sun7i-a20-icnova-swac.dts | 10 +-
arch/arm/dts/sun7i-a20-itead-ibox.dts | 10 +-
arch/arm/dts/sun7i-a20-lamobo-r1.dts | 48 +--
arch/arm/dts/sun7i-a20-m3.dts | 21 +-
arch/arm/dts/sun7i-a20-m5.dts | 8 +-
arch/arm/dts/sun7i-a20-mk808c.dts | 26 +-
arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts | 35 ++
arch/arm/dts/sun7i-a20-olimex-som-evb.dts | 68 +---
arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts | 2 -
arch/arm/dts/sun7i-a20-olimex-som204-evb.dts | 36 +-
arch/arm/dts/sun7i-a20-olinuxino-lime.dts | 22 +-
arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts | 11 -
arch/arm/dts/sun7i-a20-olinuxino-lime2.dts | 34 +-
arch/arm/dts/sun7i-a20-olinuxino-micro-emmc.dts | 2 -
arch/arm/dts/sun7i-a20-olinuxino-micro.dts | 54 +--
arch/arm/dts/sun7i-a20-orangepi-mini.dts | 52 +--
arch/arm/dts/sun7i-a20-orangepi.dts | 44 +--
arch/arm/dts/sun7i-a20-pcduino3-nano.dts | 31 +-
arch/arm/dts/sun7i-a20-pcduino3.dts | 39 +-
arch/arm/dts/sun7i-a20-primo73.dts | 4 +-
arch/arm/dts/sun7i-a20-wexler-tab7200.dts | 39 +-
.../arm/dts/sun7i-a20-wits-pro-a20-dkt-u-boot.dtsi | 10 +
arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts | 23 +-
arch/arm/dts/sun7i-a20-yones-toptech-bd1078.dts | 2 +-
arch/arm/dts/sun7i-a20.dtsi | 209 +++++++----
arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts | 91 ++++-
arch/arm/dts/sun8i-r40.dtsi | 364 ++++++++++++++++++-
arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | 20 +-
arch/arm/dts/sunxi-itead-core-common.dtsi | 6 +-
arch/arm/mach-sunxi/Kconfig | 13 -
board/sunxi/Makefile | 3 -
board/sunxi/gmac.c | 8 -
drivers/ata/Kconfig | 8 +
drivers/ata/Makefile | 1 +
board/sunxi/ahci.c => drivers/ata/ahci_sunxi.c | 11 +-
drivers/clk/sunxi/clk_r40.c | 3 +-
drivers/net/sun8i_emac.c | 112 +++---
drivers/net/sunxi_emac.c | 28 +-
include/configs/sunxi-common.h | 6 -
include/dt-bindings/clock/sun8i-tcon-top.h | 11 +
scripts/config_whitelist.txt | 1 -
53 files changed, 1493 insertions(+), 956 deletions(-)
create mode 100644 arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts
create mode 100644 arch/arm/dts/sun7i-a20-wits-pro-a20-dkt-u-boot.dtsi
rename board/sunxi/ahci.c => drivers/ata/ahci_sunxi.c (94%)
create mode 100644 include/dt-bindings/clock/sun8i-tcon-top.h
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-04-12 13:04 Jagan Teki
@ 2019-04-13 3:41 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2019-04-13 3:41 UTC (permalink / raw)
To: u-boot
On Fri, Apr 12, 2019 at 06:34:52PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit 3c99166441bf3ea325af2da83cfe65430b49c066:
>
> Prepare v2019.04 (2019-04-08 21:40:40 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 067e0b9684d4f195d92e0b1de260d69dc1e0f2c5:
>
> sunxi: Allow booting from 128KB SD/eMMC offset (2019-04-10 15:34:32 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190412/fe367a70/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-04-12 13:04 Jagan Teki
2019-04-13 3:41 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-04-12 13:04 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit 3c99166441bf3ea325af2da83cfe65430b49c066:
Prepare v2019.04 (2019-04-08 21:40:40 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 067e0b9684d4f195d92e0b1de260d69dc1e0f2c5:
sunxi: Allow booting from 128KB SD/eMMC offset (2019-04-10 15:34:32 +0530)
----------------------------------------------------------------
Andre Przywara (2):
sunxi: Pine64-LTS: (Re-)enable USB 1.x support
sunxi: Allow booting from 128KB SD/eMMC offset
Jagan Teki (1):
sun50i: a64: Add Oceanic 5205 5inMFD initial support
Michael Trimarchi (1):
sunxi: dram_sun8i: Fix A33 memory initialization
Paul Kocialkowski (3):
arm: sunxi: Allow per-platform DRAM ZQ configuration on sun8i
arm: sunxi: Set the default DRAM ZQ value to 3881979 on H3/H5
arm: sunxi: Enable DRAM ODT by default on H3/H5
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts | 68 +++++++++++++++++++++++++
arch/arm/include/asm/arch-sunxi/spl.h | 2 +
arch/arm/mach-sunxi/Kconfig | 6 ++-
arch/arm/mach-sunxi/board.c | 2 +
arch/arm/mach-sunxi/dram_sun8i_a33.c | 2 +-
board/sunxi/MAINTAINERS | 5 ++
configs/bananapi_m2_plus_h3_defconfig | 2 -
configs/bananapi_m2_plus_h5_defconfig | 2 -
configs/bananapi_m2_zero_defconfig | 2 -
configs/emlid_neutis_n5_devboard_defconfig | 1 +
configs/libretech_all_h3_cc_h2_plus_defconfig | 2 -
configs/libretech_all_h3_cc_h3_defconfig | 2 -
configs/libretech_all_h3_cc_h5_defconfig | 2 -
configs/nanopi_m1_defconfig | 2 -
configs/nanopi_m1_plus_defconfig | 2 -
configs/nanopi_neo2_defconfig | 1 +
configs/nanopi_neo_air_defconfig | 2 -
configs/nanopi_neo_defconfig | 2 -
configs/nanopi_neo_plus2_defconfig | 1 +
configs/oceanic_5205_5inmfd_defconfig | 20 ++++++++
configs/orangepi_2_defconfig | 2 -
configs/orangepi_lite_defconfig | 2 -
configs/orangepi_one_defconfig | 2 -
configs/orangepi_pc2_defconfig | 1 +
configs/orangepi_pc_defconfig | 2 -
configs/orangepi_pc_plus_defconfig | 2 -
configs/orangepi_plus2e_defconfig | 2 -
configs/orangepi_plus_defconfig | 2 -
configs/orangepi_prime_defconfig | 1 +
configs/orangepi_r1_defconfig | 2 -
configs/orangepi_zero_defconfig | 2 -
configs/orangepi_zero_plus2_defconfig | 1 +
configs/orangepi_zero_plus_defconfig | 1 +
configs/pine64-lts_defconfig | 1 +
35 files changed, 111 insertions(+), 41 deletions(-)
create mode 100644 arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
create mode 100644 configs/oceanic_5205_5inmfd_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-04-01 16:30 Jagan Teki
@ 2019-04-01 19:55 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2019-04-01 19:55 UTC (permalink / raw)
To: u-boot
On Mon, Apr 01, 2019 at 10:00:14PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this patch for v2019.04 release.
>
> thanks,
> Jagan.
>
> The following changes since commit 48cf0d8c6d261f543bff12046a366ec3b832937d:
>
> Merge tag 'video-fixes-for-2019.04-rc4' of git://git.denx.de/u-boot-video (2019-03-31 07:25:11 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 9d1e136734b80414c803301d69d4cd358001be93:
>
> clk: sunxi: a10: Add CLK_AHB_GMAC (2019-04-01 21:45:15 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190401/e1803f6d/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-04-01 16:30 Jagan Teki
2019-04-01 19:55 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-04-01 16:30 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this patch for v2019.04 release.
thanks,
Jagan.
The following changes since commit 48cf0d8c6d261f543bff12046a366ec3b832937d:
Merge tag 'video-fixes-for-2019.04-rc4' of git://git.denx.de/u-boot-video (2019-03-31 07:25:11 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 9d1e136734b80414c803301d69d4cd358001be93:
clk: sunxi: a10: Add CLK_AHB_GMAC (2019-04-01 21:45:15 +0530)
----------------------------------------------------------------
Jagan Teki (1):
clk: sunxi: a10: Add CLK_AHB_GMAC
drivers/clk/sunxi/clk_a10.c | 2 ++
1 file changed, 2 insertions(+)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-03-11 17:29 Jagan Teki
@ 2019-03-12 14:55 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2019-03-12 14:55 UTC (permalink / raw)
To: u-boot
On Mon, Mar 11, 2019 at 10:59:35PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> Summary:
> - axp818 fix
> - fix warnings for ethernet clock code
>
> The following changes since commit f18b7b2798cc37b613b5d3dda2e1461857a913b8:
>
> Merge branch 'master' of git://git.denx.de/u-boot-spi (2019-03-06 20:25:09 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to aefc0b7a60b9147b79b7a735c045e28daba712f1:
>
> clk: sunxi: h3: Implement EPHY CLK and RESET (2019-03-09 13:16:35 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190312/9cc20782/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-03-11 17:29 Jagan Teki
2019-03-12 14:55 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-03-11 17:29 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
Summary:
- axp818 fix
- fix warnings for ethernet clock code
The following changes since commit f18b7b2798cc37b613b5d3dda2e1461857a913b8:
Merge branch 'master' of git://git.denx.de/u-boot-spi (2019-03-06 20:25:09 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to aefc0b7a60b9147b79b7a735c045e28daba712f1:
clk: sunxi: h3: Implement EPHY CLK and RESET (2019-03-09 13:16:35 +0530)
----------------------------------------------------------------
Jagan Teki (3):
clk: sunxi: Implement A10 EMAC clocks
clk: sunxi: Implement EMAC, GMAC clocks, resets
clk: sunxi: h3: Implement EPHY CLK and RESET
Ondrej Jirman (1):
power: axp818: Fix typo in axp_set_dldo
drivers/clk/sunxi/clk_a10.c | 1 +
drivers/clk/sunxi/clk_a10s.c | 1 +
drivers/clk/sunxi/clk_a31.c | 2 ++
drivers/clk/sunxi/clk_a64.c | 2 ++
drivers/clk/sunxi/clk_a83t.c | 2 ++
drivers/clk/sunxi/clk_h3.c | 6 ++++++
drivers/clk/sunxi/clk_h6.c | 4 ++++
drivers/clk/sunxi/clk_r40.c | 3 +++
drivers/power/axp818.c | 2 +-
9 files changed, 22 insertions(+), 1 deletion(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-02-28 19:08 Jagan Teki
@ 2019-02-28 23:55 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2019-02-28 23:55 UTC (permalink / raw)
To: u-boot
On Fri, Mar 01, 2019 at 12:38:23AM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> Jagan.
>
> The following changes since commit b89074f65047c4058741ed2bf3e6ff0c5af4c5bc:
>
> Merge tag 'u-boot-imx-2019-02-16' of git://git.denx.de/u-boot-imx (2019-02-16 08:31:05 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to da95ed58c4765ff23ed35753878274ef585f28b5:
>
> sunxi: Add Bananapi M2+ H5 board (2019-02-18 14:46:53 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190228/2bca2c53/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-02-28 19:08 Jagan Teki
2019-02-28 23:55 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-02-28 19:08 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
Jagan.
The following changes since commit b89074f65047c4058741ed2bf3e6ff0c5af4c5bc:
Merge tag 'u-boot-imx-2019-02-16' of git://git.denx.de/u-boot-imx (2019-02-16 08:31:05 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to da95ed58c4765ff23ed35753878274ef585f28b5:
sunxi: Add Bananapi M2+ H5 board (2019-02-18 14:46:53 +0530)
----------------------------------------------------------------
Chen-Yu Tsai (3):
sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
sunxi: Add Bananapi M2+ H5 board
arch/arm/dts/sun50i-h5-bananapi-m2-plus.dts | 11 +
arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts | 190 +---------------
arch/arm/dts/sunxi-bananapi-m2-plus.dtsi | 245 +++++++++++++++++++++
board/sunxi/MAINTAINERS | 12 +-
...lus_defconfig => bananapi_m2_plus_h3_defconfig} | 0
configs/bananapi_m2_plus_h5_defconfig | 20 ++
6 files changed, 285 insertions(+), 193 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h5-bananapi-m2-plus.dts
create mode 100644 arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
rename configs/{Sinovoip_BPI_M2_Plus_defconfig => bananapi_m2_plus_h3_defconfig} (100%)
create mode 100644 configs/bananapi_m2_plus_h5_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-02-14 17:20 Jagan Teki
@ 2019-02-16 1:09 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2019-02-16 1:09 UTC (permalink / raw)
To: u-boot
On Thu, Feb 14, 2019 at 10:50:11PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> PR about some random fixes.
>
> Summary:
> - MMC CD pin fix on Orangepi Zero plus
> - SPI boot for Olinuxino Lime2-eMMC boards
> - Change in dram frequnecy for tbs_a711
>
> The following changes since commit dbe70c7d4e3d5c705a98d82952e05a591efd0683:
>
> Merge branch 'master' of git://git.denx.de/u-boot-sh (2019-02-10 08:11:53 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to d065a6c00a63c2f441bb8b5d31407c5e10da9612:
>
> configs: tbs_a711: lower dram frequency (2019-02-12 17:25:44 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190215/42ed22f7/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-02-14 17:20 Jagan Teki
2019-02-16 1:09 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-02-14 17:20 UTC (permalink / raw)
To: u-boot
Hi Tom,
PR about some random fixes.
Summary:
- MMC CD pin fix on Orangepi Zero plus
- SPI boot for Olinuxino Lime2-eMMC boards
- Change in dram frequnecy for tbs_a711
The following changes since commit dbe70c7d4e3d5c705a98d82952e05a591efd0683:
Merge branch 'master' of git://git.denx.de/u-boot-sh (2019-02-10 08:11:53 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to d065a6c00a63c2f441bb8b5d31407c5e10da9612:
configs: tbs_a711: lower dram frequency (2019-02-12 17:25:44 +0530)
----------------------------------------------------------------
Hauke Mehrtens (1):
sun50i: h5: Orange Pi Zero Plus: Fix SdCard detection
Priit Laes (1):
arm: sunxi: Enable SPL/SPI boot for Olinuxino Lime2-eMMC boards
Tomas Novotny (1):
configs: tbs_a711: lower dram frequency
configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 +
configs/orangepi_zero_plus_defconfig | 3 +--
configs/tbs_a711_defconfig | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-01-30 16:26 Jagan Teki
@ 2019-01-31 2:42 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2019-01-31 2:42 UTC (permalink / raw)
To: u-boot
On Wed, Jan 30, 2019 at 09:56:22PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> We are 2 days late to send this DM_MMC changes, hope you understand
> and apply this PR asap.
That's OK, I'm 2 days late on -rc1 so far. Can I assume a SPI PR is
coming my way soon as well?
>
> thanks,
> Jagan.
>
> The following changes since commit 2f41ade79e5969ebea03a7dcadbeae8e03787d7e:
>
> linker: Modify linker scripts to be more generic (2019-01-26 22:55:53 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to a7cca5793774ee139b75a704d6efaa4d29f09f93:
>
> arm: sunxi: Enable DM_MMC (2019-01-30 18:22:18 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190130/e58d1ef0/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-01-30 16:26 Jagan Teki
2019-01-31 2:42 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-01-30 16:26 UTC (permalink / raw)
To: u-boot
Hi Tom,
We are 2 days late to send this DM_MMC changes, hope you understand
and apply this PR asap.
thanks,
Jagan.
The following changes since commit 2f41ade79e5969ebea03a7dcadbeae8e03787d7e:
linker: Modify linker scripts to be more generic (2019-01-26 22:55:53 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to a7cca5793774ee139b75a704d6efaa4d29f09f93:
arm: sunxi: Enable DM_MMC (2019-01-30 18:22:18 +0530)
----------------------------------------------------------------
Andre Przywara (6):
sunxi: clk: add MMC gates/resets
sunxi: clk: A80: add MMC clock support
mmc: sunxi: Add DM clk and reset support
sunxi: board: do MMC pinmux setup for DM_MMC builds
mmc: sunxi: Honour non-removable property in DT
sunxi: clk: enable clk and reset for CCU devices
Jagan Teki (7):
sunxi: amarula_a64_relic: Enable USB host
mmc: sunxi: Add remaining compatible strings
mmc: sunxi: Add DM_MMC support for H6
mmc: sunxi: Add DM_MMC support for A80
arm: dts: sunxi: Alter mmc2 auto-numbering to mmc1
sunxi: A64: pinebook-u-boot: Include sunxi-u-boot.dtsi
arm: sunxi: Enable DM_MMC
arch/arm/Kconfig | 1 +
arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 2 ++
arch/arm/dts/sunxi-u-boot.dtsi | 4 +++
arch/arm/mach-sunxi/Kconfig | 1 -
board/sunxi/board.c | 15 ++++++++
configs/Linksprite_pcDuino3_defconfig | 1 -
configs/amarula_a64_relic_defconfig | 2 ++
drivers/clk/sunxi/clk_a10.c | 4 +++
drivers/clk/sunxi/clk_a10s.c | 3 ++
drivers/clk/sunxi/clk_a23.c | 6 ++++
drivers/clk/sunxi/clk_a31.c | 8 +++++
drivers/clk/sunxi/clk_a64.c | 6 ++++
drivers/clk/sunxi/clk_a80.c | 32 ++++++++++++++++-
drivers/clk/sunxi/clk_a83t.c | 6 ++++
drivers/clk/sunxi/clk_h3.c | 6 ++++
drivers/clk/sunxi/clk_h6.c | 6 ++++
drivers/clk/sunxi/clk_r40.c | 8 +++++
drivers/clk/sunxi/clk_sunxi.c | 12 +++++++
drivers/clk/sunxi/clk_v3s.c | 6 ++++
drivers/mmc/sunxi_mmc.c | 53 ++++++++++++++++++++++++----
20 files changed, 173 insertions(+), 9 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-01-24 20:14 Jagan Teki
@ 2019-01-25 15:17 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2019-01-25 15:17 UTC (permalink / raw)
To: u-boot
On Fri, Jan 25, 2019 at 01:44:27AM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit f83ef0dac83110d20389eb71f09285f009f3d198:
>
> Merge tag 'mips-pull-2019-11-16' of git://git.denx.de/u-boot-mips (2019-01-17 19:12:55 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 543049ab590620a91b37fa0296edd3bcddd0eba2:
>
> usb: host: Drop [e-o]hci-sunxi drivers (2019-01-18 22:19:09 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190125/e2e6dcef/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-01-24 20:14 Jagan Teki
2019-01-25 15:17 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-01-24 20:14 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit f83ef0dac83110d20389eb71f09285f009f3d198:
Merge tag 'mips-pull-2019-11-16' of git://git.denx.de/u-boot-mips (2019-01-17 19:12:55 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 543049ab590620a91b37fa0296edd3bcddd0eba2:
usb: host: Drop [e-o]hci-sunxi drivers (2019-01-18 22:19:09 +0530)
----------------------------------------------------------------
Aleksandr Aleksandrov (1):
board: sun50i-h5: Add Emlid Neutis N5 support
Jagan Teki (22):
clk: Add Allwinner A64 CLK driver
reset: Add Allwinner RESET driver
clk: sunxi: Add Allwinner H3/H5 CLK driver
clk: sunxi: Add Allwinner A10/A20 CLK driver
clk: sunxi: Add Allwinner A10s/A13 CLK driver
clk: sunxi: Add Allwinner A31 CLK driver
clk: sunxi: Add Allwinner A23/A33 CLK driver
clk: sunxi: Add Allwinner A83T CLK driver
clk: sunxi: Add Allwinner R40 CLK driver
clk: sunxi: Add Allwinner V3S CLK driver
clk: sunxi: Implement UART clocks
clk: sunxi: Implement UART resets
clk: sunxi: Add Allwinner H6 CLK driver
ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3
clk: sunxi: Add Allwinner A80 CLK driver
sunxi: A64: Update sun50i-a64-ccu.h
arm: sunxi: Enable CLK, RESET
phy: sun4i-usb: Use CLK and RESET support
reset: Add reset valid
musb-new: sunxi: Use CLK and RESET support
sunxi: usb: Switch to Generic host controllers
usb: host: Drop [e-o]hci-sunxi drivers
Stefan Mavrodiev (1):
sunxi: board: Add i2c initialization for sun50i
arch/arm/Kconfig | 1 +
arch/arm/dts/Makefile | 1 +
.../arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts | 184 ++++
arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi | 96 ++
arch/arm/dts/sun9i-a80-cubieboard4.dts | 260 ++++-
arch/arm/dts/sun9i-a80-cx-a99.dts | 2 +-
arch/arm/dts/sun9i-a80-optimus.dts | 227 ++++-
arch/arm/dts/sun9i-a80.dtsi | 1062 ++++++++++++--------
arch/arm/include/asm/arch-sunxi/ccu.h | 96 ++
arch/arm/include/asm/arch-sunxi/gpio.h | 3 +
board/sunxi/MAINTAINERS | 5 +
board/sunxi/board.c | 12 +
configs/A10-OLinuXino-Lime_defconfig | 1 +
configs/A10s-OLinuXino-M_defconfig | 1 +
configs/A13-OLinuXinoM_defconfig | 1 +
configs/A13-OLinuXino_defconfig | 1 +
configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 +
configs/A20-OLinuXino-Lime2_defconfig | 1 +
configs/A20-OLinuXino-Lime_defconfig | 1 +
configs/A20-OLinuXino_MICRO-eMMC_defconfig | 1 +
configs/A20-OLinuXino_MICRO_defconfig | 1 +
configs/A20-Olimex-SOM-EVB_defconfig | 1 +
configs/A20-Olimex-SOM204-EVB-eMMC_defconfig | 1 +
configs/A20-Olimex-SOM204-EVB_defconfig | 1 +
configs/Auxtek-T003_defconfig | 1 +
configs/Auxtek-T004_defconfig | 1 +
configs/Bananapi_defconfig | 1 +
configs/Bananapi_m2m_defconfig | 1 +
configs/Bananapro_defconfig | 1 +
configs/CHIP_defconfig | 1 +
configs/CHIP_pro_defconfig | 1 +
configs/CSQ_CS908_defconfig | 1 +
configs/Colombus_defconfig | 1 +
configs/Cubieboard2_defconfig | 1 +
configs/Cubieboard_defconfig | 1 +
configs/Cubietruck_defconfig | 1 +
configs/Cubietruck_plus_defconfig | 1 +
configs/Hummingbird_A31_defconfig | 1 +
configs/Itead_Ibox_A20_defconfig | 1 +
configs/Lamobo_R1_defconfig | 1 +
configs/Linksprite_pcDuino3_Nano_defconfig | 1 +
configs/Linksprite_pcDuino3_defconfig | 1 +
configs/Linksprite_pcDuino_defconfig | 1 +
configs/MK808C_defconfig | 1 +
configs/Marsboard_A10_defconfig | 1 +
configs/Mele_A1000G_quad_defconfig | 1 +
configs/Mele_A1000_defconfig | 1 +
configs/Mele_I7_defconfig | 1 +
configs/Mele_M3_defconfig | 1 +
configs/Mele_M5_defconfig | 1 +
configs/Mele_M9_defconfig | 1 +
configs/Mini-X_defconfig | 1 +
configs/Orangepi_defconfig | 1 +
configs/Orangepi_mini_defconfig | 1 +
configs/Sinlinx_SinA31s_defconfig | 1 +
configs/Sinlinx_SinA33_defconfig | 1 +
configs/Sinovoip_BPI_M2_Plus_defconfig | 1 +
configs/Sinovoip_BPI_M2_defconfig | 1 +
configs/Sinovoip_BPI_M3_defconfig | 1 +
configs/Wexler_TAB7200_defconfig | 1 +
configs/Wits_Pro_A20_DKT_defconfig | 1 +
configs/Wobo_i5_defconfig | 1 +
configs/a64-olinuxino_defconfig | 1 +
configs/ba10_tv_box_defconfig | 1 +
configs/bananapi_m1_plus_defconfig | 1 +
configs/bananapi_m64_defconfig | 1 +
configs/emlid_neutis_n5_devboard_defconfig | 13 +
configs/ga10h_v1_1_defconfig | 1 +
configs/h8_homlet_v2_defconfig | 1 +
configs/i12-tvbox_defconfig | 1 +
configs/icnova-a20-swac_defconfig | 1 +
configs/inet1_defconfig | 1 +
configs/inet_q972_defconfig | 1 +
configs/jesurun_q5_defconfig | 1 +
configs/libretech_all_h3_cc_h2_plus_defconfig | 1 +
configs/libretech_all_h3_cc_h3_defconfig | 1 +
configs/libretech_all_h3_cc_h5_defconfig | 1 +
configs/mixtile_loftq_defconfig | 1 +
configs/mk802_a10s_defconfig | 1 +
configs/mk802_defconfig | 1 +
configs/mk802ii_defconfig | 1 +
configs/nanopi_a64_defconfig | 1 +
configs/nanopi_m1_defconfig | 1 +
configs/nanopi_m1_plus_defconfig | 1 +
configs/nanopi_neo2_defconfig | 1 +
configs/nanopi_neo_air_defconfig | 1 +
configs/nanopi_neo_defconfig | 1 +
configs/nanopi_neo_plus2_defconfig | 1 +
configs/orangepi_2_defconfig | 1 +
configs/orangepi_lite_defconfig | 1 +
configs/orangepi_one_defconfig | 1 +
configs/orangepi_pc2_defconfig | 1 +
configs/orangepi_pc_defconfig | 1 +
configs/orangepi_pc_plus_defconfig | 1 +
configs/orangepi_plus2e_defconfig | 1 +
configs/orangepi_plus_defconfig | 1 +
configs/orangepi_prime_defconfig | 1 +
configs/orangepi_r1_defconfig | 1 +
configs/orangepi_win_defconfig | 1 +
configs/orangepi_zero_defconfig | 1 +
configs/orangepi_zero_plus2_defconfig | 1 +
configs/orangepi_zero_plus_defconfig | 1 +
configs/parrot_r16_defconfig | 1 +
configs/pine64_plus_defconfig | 1 +
configs/pinebook_defconfig | 1 +
configs/r7-tv-dongle_defconfig | 1 +
configs/sopine_baseboard_defconfig | 1 +
configs/sun8i_a23_evb_defconfig | 1 +
configs/sunxi_Gemei_G9_defconfig | 1 +
configs/tbs_a711_defconfig | 1 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/sunxi/Kconfig | 89 ++
drivers/clk/sunxi/Makefile | 19 +
drivers/clk/sunxi/clk_a10.c | 68 ++
drivers/clk/sunxi/clk_a10s.c | 61 ++
drivers/clk/sunxi/clk_a23.c | 75 ++
drivers/clk/sunxi/clk_a31.c | 82 ++
drivers/clk/sunxi/clk_a64.c | 78 ++
drivers/clk/sunxi/clk_a80.c | 57 ++
drivers/clk/sunxi/clk_a83t.c | 75 ++
drivers/clk/sunxi/clk_h3.c | 89 ++
drivers/clk/sunxi/clk_h6.c | 53 +
drivers/clk/sunxi/clk_r40.c | 88 ++
drivers/clk/sunxi/clk_sunxi.c | 74 ++
drivers/clk/sunxi/clk_v3s.c | 59 ++
drivers/phy/allwinner/phy-sun4i-usb.c | 77 +-
drivers/reset/Kconfig | 8 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-sunxi.c | 124 +++
drivers/usb/host/Kconfig | 2 +
drivers/usb/host/Makefile | 2 -
drivers/usb/host/ehci-sunxi.c | 204 ----
drivers/usb/host/ohci-sunxi.c | 233 -----
drivers/usb/musb-new/sunxi.c | 79 +-
include/configs/sun4i.h | 4 -
include/configs/sun50i.h | 5 -
include/configs/sun5i.h | 4 -
include/configs/sun6i.h | 4 -
include/configs/sun7i.h | 4 -
include/configs/sun8i.h | 4 -
include/configs/sunxi-common.h | 1 -
include/dt-bindings/clock/sun50i-a64-ccu.h | 2 +
include/dt-bindings/clock/sun9i-a80-ccu.h | 162 +++
include/dt-bindings/clock/sun9i-a80-de.h | 80 ++
include/dt-bindings/clock/sun9i-a80-usb.h | 59 ++
include/dt-bindings/reset/sun9i-a80-ccu.h | 102 ++
include/dt-bindings/reset/sun9i-a80-de.h | 58 ++
include/dt-bindings/reset/sun9i-a80-usb.h | 56 ++
include/reset.h | 11 +
scripts/config_whitelist.txt | 2 -
151 files changed, 3318 insertions(+), 998 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts
create mode 100644 arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi
create mode 100644 arch/arm/include/asm/arch-sunxi/ccu.h
create mode 100644 configs/emlid_neutis_n5_devboard_defconfig
create mode 100644 drivers/clk/sunxi/Kconfig
create mode 100644 drivers/clk/sunxi/Makefile
create mode 100644 drivers/clk/sunxi/clk_a10.c
create mode 100644 drivers/clk/sunxi/clk_a10s.c
create mode 100644 drivers/clk/sunxi/clk_a23.c
create mode 100644 drivers/clk/sunxi/clk_a31.c
create mode 100644 drivers/clk/sunxi/clk_a64.c
create mode 100644 drivers/clk/sunxi/clk_a80.c
create mode 100644 drivers/clk/sunxi/clk_a83t.c
create mode 100644 drivers/clk/sunxi/clk_h3.c
create mode 100644 drivers/clk/sunxi/clk_h6.c
create mode 100644 drivers/clk/sunxi/clk_r40.c
create mode 100644 drivers/clk/sunxi/clk_sunxi.c
create mode 100644 drivers/clk/sunxi/clk_v3s.c
create mode 100644 drivers/reset/reset-sunxi.c
delete mode 100644 drivers/usb/host/ehci-sunxi.c
delete mode 100644 drivers/usb/host/ohci-sunxi.c
create mode 100644 include/dt-bindings/clock/sun9i-a80-ccu.h
create mode 100644 include/dt-bindings/clock/sun9i-a80-de.h
create mode 100644 include/dt-bindings/clock/sun9i-a80-usb.h
create mode 100644 include/dt-bindings/reset/sun9i-a80-ccu.h
create mode 100644 include/dt-bindings/reset/sun9i-a80-de.h
create mode 100644 include/dt-bindings/reset/sun9i-a80-usb.h
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-01-10 9:20 Jagan Teki
@ 2019-01-10 23:18 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2019-01-10 23:18 UTC (permalink / raw)
To: u-boot
On Thu, Jan 10, 2019 at 02:50:53PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this fix for the release v2019.01
>
> Sorry for last minute trouble.
>
> thanks,
> Jagan.
>
> The following changes since commit 54707a942009fae083dd78b58ff057127ba0e900:
>
> Prepare v2019.01-rc3 (2019-01-07 22:58:17 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to e8f37f4203983f75cadd857c9c7e6d6477bf3e54:
>
> mmc: sunxi: Fix mmc clocks for DM_MMC (2019-01-10 14:45:15 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190110/d5d5be16/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-01-10 9:20 Jagan Teki
2019-01-10 23:18 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-01-10 9:20 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this fix for the release v2019.01
Sorry for last minute trouble.
thanks,
Jagan.
The following changes since commit 54707a942009fae083dd78b58ff057127ba0e900:
Prepare v2019.01-rc3 (2019-01-07 22:58:17 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to e8f37f4203983f75cadd857c9c7e6d6477bf3e54:
mmc: sunxi: Fix mmc clocks for DM_MMC (2019-01-10 14:45:15 +0530)
----------------------------------------------------------------
Jagan Teki (1):
mmc: sunxi: Fix mmc clocks for DM_MMC
drivers/mmc/sunxi_mmc.c | 50 ++++++++++++++++++++++++++++++++++++-------------
1 file changed, 37 insertions(+), 13 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2019-01-01 19:22 Jagan Teki
@ 2019-01-02 1:02 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2019-01-02 1:02 UTC (permalink / raw)
To: u-boot
On Wed, Jan 02, 2019 at 12:52:05AM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this as part of v2019.01 release.
>
> thanks,
> Jagan.
>
> The following changes since commit bea3d826203f90507ff32ed24bd0a3c53479e55c:
>
> Merge tag 'signed-efi-2019.01' of git://github.com/agraf/u-boot (2018-12-27 12:59:01 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 44c214dc2738da979d277d8d45fe50997b62b5f8:
>
> Revert "sunxi: board: Print error after power initialization fails" (2018-12-30 00:57:17 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190101/0d5dc7e1/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2019-01-01 19:22 Jagan Teki
2019-01-02 1:02 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2019-01-01 19:22 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this as part of v2019.01 release.
thanks,
Jagan.
The following changes since commit bea3d826203f90507ff32ed24bd0a3c53479e55c:
Merge tag 'signed-efi-2019.01' of git://github.com/agraf/u-boot (2018-12-27 12:59:01 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 44c214dc2738da979d277d8d45fe50997b62b5f8:
Revert "sunxi: board: Print error after power initialization fails" (2018-12-30 00:57:17 +0530)
----------------------------------------------------------------
From: Karl Palsson (1):
Revert "sunxi: board: Print error after power initialization fails"
board/sunxi/board.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-12-07 20:54 Jagan Teki
@ 2018-12-08 13:49 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-12-08 13:49 UTC (permalink / raw)
To: u-boot
On Sat, Dec 08, 2018 at 02:24:02AM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit 57dbc151437b36cc1105857d222df28b095236d7:
>
> rockchip: rk3399: Add MAINTAINERS entry (2018-12-06 10:24:12 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 8a6121ea078347de017c833e131eb4a806cf0c51:
>
> sunxi: update README.sunxi64 (2018-12-07 22:30:19 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181208/b3082f64/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-12-07 20:54 Jagan Teki
2018-12-08 13:49 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-12-07 20:54 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit 57dbc151437b36cc1105857d222df28b095236d7:
rockchip: rk3399: Add MAINTAINERS entry (2018-12-06 10:24:12 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 8a6121ea078347de017c833e131eb4a806cf0c51:
sunxi: update README.sunxi64 (2018-12-07 22:30:19 +0530)
----------------------------------------------------------------
Andre Przywara (1):
sunxi: update README.sunxi64
Olliver Schinagl (8):
sunxi: board: Print error after power initialization fails
sunxi: pmic_bus: Decrease boot time by not writing duplicate data
power: axp209: Use BIT() macro
power: axp209: Define the chip version mask
power: axp209: Reduce magic values by adding defines for LDO[234]
power: axp209: Add support for voltage rate control on LDO3
power: axp209: Limit inrush current for broken boards
arm: sunxi: Reduce inrush current on Olimex OLinuXino-A20-Lime2
Priit Laes (1):
arm: sunxi: Reduce inrush current on Olimex OLinuXino-A20-Lime2-eMMC
arch/arm/mach-sunxi/pmic_bus.c | 6 +++
board/sunxi/README.sunxi64 | 25 ++++++++---
board/sunxi/board.c | 18 ++++----
configs/A20-OLinuXino-Lime2-eMMC_defconfig | 2 +
configs/A20-OLinuXino-Lime2_defconfig | 2 +
drivers/power/Kconfig | 43 ++++++++++++++++++
drivers/power/axp209.c | 66 +++++++++++++++++++++++-----
include/axp209.h | 70 +++++++++++++++++++++++-------
8 files changed, 191 insertions(+), 41 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-11-26 18:27 Jagan Teki
@ 2018-11-27 3:12 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-11-27 3:12 UTC (permalink / raw)
To: u-boot
On Mon, Nov 26, 2018 at 11:57:55PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit a3e1653ddeb02f39481eba572275016171e9670c:
>
> Merge git://git.denx.de/u-boot-marvell (2018-11-20 12:39:16 -0500)
In the future can you please include a short summary here if you aren't
using a signed tag? Thanks!
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 9b16ede4a4e898564f54e1c09ae658a5975b432b:
>
> sun8i_emac: add support for setting EMAC TX/RX delay (2018-11-23 11:01:09 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181126/76b31788/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-11-26 18:27 Jagan Teki
2018-11-27 3:12 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-11-26 18:27 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit a3e1653ddeb02f39481eba572275016171e9670c:
Merge git://git.denx.de/u-boot-marvell (2018-11-20 12:39:16 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 9b16ede4a4e898564f54e1c09ae658a5975b432b:
sun8i_emac: add support for setting EMAC TX/RX delay (2018-11-23 11:01:09 +0530)
----------------------------------------------------------------
Icenowy Zheng (1):
sun8i_emac: add support for setting EMAC TX/RX delay
Michael Trimarchi (1):
sunxi: Fix memory 2-rank initialization for a33 cpu
Vasily Khoruzhick (3):
sunxi-mmc: introduce new MMC_SUNXI_HAS_MODE_SWITCH option
sunxi-mmc: don't double clock for new mode unconditionally
sunxi-mmc: use new mode on both controllers on A64
arch/arm/mach-sunxi/Kconfig | 2 ++
arch/arm/mach-sunxi/dram_sun8i_a33.c | 2 +-
drivers/mmc/Kconfig | 4 ++++
drivers/mmc/sunxi_mmc.c | 19 +++++++++----------
drivers/net/sun8i_emac.c | 34 +++++++++++++++++++++++++++++++---
5 files changed, 47 insertions(+), 14 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-11-13 19:19 Jagan Teki
2018-11-13 19:42 ` Tom Rini
@ 2018-11-15 21:04 ` Tom Rini
1 sibling, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-11-15 21:04 UTC (permalink / raw)
To: u-boot
On Wed, Nov 14, 2018 at 12:49:45AM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit 454cf76184c65426b68033a23da086e73663f2fc:
>
> Prepare v2018.11-rc3 (2018-10-29 16:04:26 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 7d121a8ea4e0dbf0d7e105b57c3dbd7d8bd2e729:
>
> sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD (2018-11-13 22:17:06 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181115/c4cc7acd/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-11-13 19:42 ` Tom Rini
@ 2018-11-13 20:05 ` Jagan Teki
0 siblings, 0 replies; 125+ messages in thread
From: Jagan Teki @ 2018-11-13 20:05 UTC (permalink / raw)
To: u-boot
On Wed 14 Nov, 2018, 1:12 AM Tom Rini <trini@konsulko.com wrote:
> On Wed, Nov 14, 2018 at 12:49:45AM +0530, Jagan Teki wrote:
>
> > Hi Tom,
> >
> > Please pull this PR.
> >
> > thanks,
> > Jagan.
> >
> > The following changes since commit
> 454cf76184c65426b68033a23da086e73663f2fc:
> >
> > Prepare v2018.11-rc3 (2018-10-29 16:04:26 -0400)
> >
> > are available in the Git repository at:
> >
> > git://git.denx.de/u-boot-sunxi.git master
> >
> > for you to fetch changes up to 7d121a8ea4e0dbf0d7e105b57c3dbd7d8bd2e729:
> >
> > sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD
> (2018-11-13 22:17:06 +0530)
> >
> > ----------------------------------------------------------------
> > Andre Przywara (4):
> > sunxi: A64: Update .dts/.dtsi files
> > sunxi: A64: Re-add syscon to DT node
> > sunxi: H3/H5: Update .dts files
> > sunxi: A64: Add Pine64-LTS board
> >
> > Icenowy Zheng (1):
> > sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD
> >
> > Jagan Teki (2):
> > arm64: allwinner: h6: Add common orangepi nodes into dtsi
> > board: allwinner: sun50i-h6: Add Orangepi Lite2 support
> >
> > Jun Nie (1):
> > sunxi: add support for Banana Pi M2 Zero board
> >
> > Marek Vasut (1):
> > sunxi: Imply fitImage support
> >
> > Vasily Khoruzhick (4):
> > mmc: sunxi: add support for automatic delay calibration
> > dm: video: bridge: don't fail to activate bridge if reset or sleep
> GPIO is missing
> > sun50i: A64: add support for R_I2C controller
> > sunxi: DT: add support for Pinebook
> >
> > arch/arm/Kconfig | 1 +
> > arch/arm/dts/Makefile | 3 +
> > arch/arm/dts/sun50i-a64-amarula-relic.dts | 168 ++++++++++++-
> > arch/arm/dts/sun50i-a64-bananapi-m64.dts | 34 ++-
> > arch/arm/dts/sun50i-a64-nanopi-a64.dts | 89 ++++++-
> > arch/arm/dts/sun50i-a64-olinuxino.dts | 103 +++++++-
> > arch/arm/dts/sun50i-a64-orangepi-win.dts | 179 +++++++++++++-
> > arch/arm/dts/sun50i-a64-pine64-lts.dts | 13 +
> > arch/arm/dts/sun50i-a64-pine64.dts | 32 ++-
> > arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 ++
> > arch/arm/dts/sun50i-a64-pinebook.dts | 294
> ++++++++++++++++++++++
> > arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 32 ++-
> > arch/arm/dts/sun50i-a64-sopine.dtsi | 15 ++
> > arch/arm/dts/sun50i-a64.dtsi | 312
> ++++++++++++++++++++++--
> > arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 12 +
> > arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts | 2 -
> > arch/arm/dts/sun50i-h6-orangepi-lite2.dts | 11 +
> > arch/arm/dts/sun50i-h6-orangepi-one-plus.dts | 140 +----------
> > arch/arm/dts/sun50i-h6-orangepi.dtsi | 150 ++++++++++++
> > arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 121 +++++++++
> > arch/arm/dts/sun8i-h3.dtsi | 31 +++
> > arch/arm/dts/sunxi-h3-h5.dtsi | 2 -
> > arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
> > arch/arm/include/asm/arch-sunxi/mmc.h | 6 +-
> > arch/arm/mach-sunxi/Kconfig | 1 +
> > arch/arm/mach-sunxi/clock_sun6i.c | 4 +
> > board/sunxi/MAINTAINERS | 10 +
> > board/sunxi/board.c | 6 +
> > configs/bananapi_m2_zero_defconfig | 13 +
> > configs/orangepi_lite2_defconfig | 12 +
> > configs/pine64-lts_defconfig | 19 ++
> > configs/pinebook_defconfig | 22 ++
> > drivers/mmc/sunxi_mmc.c | 21 +-
> > drivers/video/bridge/video-bridge-uclass.c | 16 +-
> > drivers/video/sunxi/lcdc.c | 22 +-
> > 35 files changed, 1710 insertions(+), 202 deletions(-)
> > create mode 100644 arch/arm/dts/sun50i-a64-pine64-lts.dts
> > create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
> > create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
> > create mode 100644 arch/arm/dts/sun50i-h6-orangepi-lite2.dts
> > create mode 100644 arch/arm/dts/sun50i-h6-orangepi.dtsi
> > create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> > create mode 100644 configs/bananapi_m2_zero_defconfig
> > create mode 100644 configs/orangepi_lite2_defconfig
> > create mode 100644 configs/pine64-lts_defconfig
> > create mode 100644 configs/pinebook_defconfig
>
> This seems to be somewhat the opposite of the SPI PR in that it's not
> just fixing up a few corner cases and so forth, so I assume you intend
> me to pull this after the release.
>
Correct.
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-11-13 19:19 Jagan Teki
@ 2018-11-13 19:42 ` Tom Rini
2018-11-13 20:05 ` Jagan Teki
2018-11-15 21:04 ` Tom Rini
1 sibling, 1 reply; 125+ messages in thread
From: Tom Rini @ 2018-11-13 19:42 UTC (permalink / raw)
To: u-boot
On Wed, Nov 14, 2018 at 12:49:45AM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit 454cf76184c65426b68033a23da086e73663f2fc:
>
> Prepare v2018.11-rc3 (2018-10-29 16:04:26 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 7d121a8ea4e0dbf0d7e105b57c3dbd7d8bd2e729:
>
> sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD (2018-11-13 22:17:06 +0530)
>
> ----------------------------------------------------------------
> Andre Przywara (4):
> sunxi: A64: Update .dts/.dtsi files
> sunxi: A64: Re-add syscon to DT node
> sunxi: H3/H5: Update .dts files
> sunxi: A64: Add Pine64-LTS board
>
> Icenowy Zheng (1):
> sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD
>
> Jagan Teki (2):
> arm64: allwinner: h6: Add common orangepi nodes into dtsi
> board: allwinner: sun50i-h6: Add Orangepi Lite2 support
>
> Jun Nie (1):
> sunxi: add support for Banana Pi M2 Zero board
>
> Marek Vasut (1):
> sunxi: Imply fitImage support
>
> Vasily Khoruzhick (4):
> mmc: sunxi: add support for automatic delay calibration
> dm: video: bridge: don't fail to activate bridge if reset or sleep GPIO is missing
> sun50i: A64: add support for R_I2C controller
> sunxi: DT: add support for Pinebook
>
> arch/arm/Kconfig | 1 +
> arch/arm/dts/Makefile | 3 +
> arch/arm/dts/sun50i-a64-amarula-relic.dts | 168 ++++++++++++-
> arch/arm/dts/sun50i-a64-bananapi-m64.dts | 34 ++-
> arch/arm/dts/sun50i-a64-nanopi-a64.dts | 89 ++++++-
> arch/arm/dts/sun50i-a64-olinuxino.dts | 103 +++++++-
> arch/arm/dts/sun50i-a64-orangepi-win.dts | 179 +++++++++++++-
> arch/arm/dts/sun50i-a64-pine64-lts.dts | 13 +
> arch/arm/dts/sun50i-a64-pine64.dts | 32 ++-
> arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 ++
> arch/arm/dts/sun50i-a64-pinebook.dts | 294 ++++++++++++++++++++++
> arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 32 ++-
> arch/arm/dts/sun50i-a64-sopine.dtsi | 15 ++
> arch/arm/dts/sun50i-a64.dtsi | 312 ++++++++++++++++++++++--
> arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 12 +
> arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts | 2 -
> arch/arm/dts/sun50i-h6-orangepi-lite2.dts | 11 +
> arch/arm/dts/sun50i-h6-orangepi-one-plus.dts | 140 +----------
> arch/arm/dts/sun50i-h6-orangepi.dtsi | 150 ++++++++++++
> arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 121 +++++++++
> arch/arm/dts/sun8i-h3.dtsi | 31 +++
> arch/arm/dts/sunxi-h3-h5.dtsi | 2 -
> arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
> arch/arm/include/asm/arch-sunxi/mmc.h | 6 +-
> arch/arm/mach-sunxi/Kconfig | 1 +
> arch/arm/mach-sunxi/clock_sun6i.c | 4 +
> board/sunxi/MAINTAINERS | 10 +
> board/sunxi/board.c | 6 +
> configs/bananapi_m2_zero_defconfig | 13 +
> configs/orangepi_lite2_defconfig | 12 +
> configs/pine64-lts_defconfig | 19 ++
> configs/pinebook_defconfig | 22 ++
> drivers/mmc/sunxi_mmc.c | 21 +-
> drivers/video/bridge/video-bridge-uclass.c | 16 +-
> drivers/video/sunxi/lcdc.c | 22 +-
> 35 files changed, 1710 insertions(+), 202 deletions(-)
> create mode 100644 arch/arm/dts/sun50i-a64-pine64-lts.dts
> create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
> create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
> create mode 100644 arch/arm/dts/sun50i-h6-orangepi-lite2.dts
> create mode 100644 arch/arm/dts/sun50i-h6-orangepi.dtsi
> create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> create mode 100644 configs/bananapi_m2_zero_defconfig
> create mode 100644 configs/orangepi_lite2_defconfig
> create mode 100644 configs/pine64-lts_defconfig
> create mode 100644 configs/pinebook_defconfig
This seems to be somewhat the opposite of the SPI PR in that it's not
just fixing up a few corner cases and so forth, so I assume you intend
me to pull this after the release.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181113/c8579a98/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-11-13 19:19 Jagan Teki
2018-11-13 19:42 ` Tom Rini
2018-11-15 21:04 ` Tom Rini
0 siblings, 2 replies; 125+ messages in thread
From: Jagan Teki @ 2018-11-13 19:19 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit 454cf76184c65426b68033a23da086e73663f2fc:
Prepare v2018.11-rc3 (2018-10-29 16:04:26 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 7d121a8ea4e0dbf0d7e105b57c3dbd7d8bd2e729:
sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD (2018-11-13 22:17:06 +0530)
----------------------------------------------------------------
Andre Przywara (4):
sunxi: A64: Update .dts/.dtsi files
sunxi: A64: Re-add syscon to DT node
sunxi: H3/H5: Update .dts files
sunxi: A64: Add Pine64-LTS board
Icenowy Zheng (1):
sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD
Jagan Teki (2):
arm64: allwinner: h6: Add common orangepi nodes into dtsi
board: allwinner: sun50i-h6: Add Orangepi Lite2 support
Jun Nie (1):
sunxi: add support for Banana Pi M2 Zero board
Marek Vasut (1):
sunxi: Imply fitImage support
Vasily Khoruzhick (4):
mmc: sunxi: add support for automatic delay calibration
dm: video: bridge: don't fail to activate bridge if reset or sleep GPIO is missing
sun50i: A64: add support for R_I2C controller
sunxi: DT: add support for Pinebook
arch/arm/Kconfig | 1 +
arch/arm/dts/Makefile | 3 +
arch/arm/dts/sun50i-a64-amarula-relic.dts | 168 ++++++++++++-
arch/arm/dts/sun50i-a64-bananapi-m64.dts | 34 ++-
arch/arm/dts/sun50i-a64-nanopi-a64.dts | 89 ++++++-
arch/arm/dts/sun50i-a64-olinuxino.dts | 103 +++++++-
arch/arm/dts/sun50i-a64-orangepi-win.dts | 179 +++++++++++++-
arch/arm/dts/sun50i-a64-pine64-lts.dts | 13 +
arch/arm/dts/sun50i-a64-pine64.dts | 32 ++-
arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 ++
arch/arm/dts/sun50i-a64-pinebook.dts | 294 ++++++++++++++++++++++
arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 32 ++-
arch/arm/dts/sun50i-a64-sopine.dtsi | 15 ++
arch/arm/dts/sun50i-a64.dtsi | 312 ++++++++++++++++++++++--
arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 12 +
arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts | 2 -
arch/arm/dts/sun50i-h6-orangepi-lite2.dts | 11 +
arch/arm/dts/sun50i-h6-orangepi-one-plus.dts | 140 +----------
arch/arm/dts/sun50i-h6-orangepi.dtsi | 150 ++++++++++++
arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 121 +++++++++
arch/arm/dts/sun8i-h3.dtsi | 31 +++
arch/arm/dts/sunxi-h3-h5.dtsi | 2 -
arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
arch/arm/include/asm/arch-sunxi/mmc.h | 6 +-
arch/arm/mach-sunxi/Kconfig | 1 +
arch/arm/mach-sunxi/clock_sun6i.c | 4 +
board/sunxi/MAINTAINERS | 10 +
board/sunxi/board.c | 6 +
configs/bananapi_m2_zero_defconfig | 13 +
configs/orangepi_lite2_defconfig | 12 +
configs/pine64-lts_defconfig | 19 ++
configs/pinebook_defconfig | 22 ++
drivers/mmc/sunxi_mmc.c | 21 +-
drivers/video/bridge/video-bridge-uclass.c | 16 +-
drivers/video/sunxi/lcdc.c | 22 +-
35 files changed, 1710 insertions(+), 202 deletions(-)
create mode 100644 arch/arm/dts/sun50i-a64-pine64-lts.dts
create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
create mode 100644 arch/arm/dts/sun50i-h6-orangepi-lite2.dts
create mode 100644 arch/arm/dts/sun50i-h6-orangepi.dtsi
create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
create mode 100644 configs/bananapi_m2_zero_defconfig
create mode 100644 configs/orangepi_lite2_defconfig
create mode 100644 configs/pine64-lts_defconfig
create mode 100644 configs/pinebook_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-10-26 15:00 Jagan Teki
@ 2018-10-26 17:08 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-10-26 17:08 UTC (permalink / raw)
To: u-boot
On Fri, Oct 26, 2018 at 08:30:05PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit 1ed3c0954bd160dafcad8847a51c3ddd5f992f51:
>
> Merge branch 'master' of git://git.denx.de/u-boot-samsung (2018-10-23 21:13:32 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 1368d950e3ecef3dad3a76486c01ff514e66646d:
>
> sunxi: store DRAM size in SPL header (2018-10-26 11:54:26 +0530)
>
> ----------------------------------------------------------------
> Andre Przywara (3):
> sunxi: Extend SPL header versioning
> sunxi: board.c: refactor SPL header checks
> sunxi: store DRAM size in SPL header
>
> Icenowy Zheng (3):
> sunxi: disable Pine A64 model detection code on other boards
> sunxi: map DRAM part with 3G size
> sunxi: add Kconfig option for the maximum accessible DRAM
>
> Priit Laes (3):
> sunxi: Fix typos of spelling Allwinner
> sunxi: docs: Mention CONFIG_NAND requirement
> sunxi: display: Mark sunxi_rgb2yuv_coef array as const
>
> Vasily Khoruzhick (3):
> pwm: sunxi: fix off-by-one that prevented PWM to use prescaler bypass
> pwm: sunxi: use new prescaler when configuring PWM
> pwm: sunxi: choose best prescaler to improve PWM resolution
NAK. The commit:
commit 6b92e01dca4bac74a02f4651afc28f7e327b13bc
Author: Icenowy Zheng <icenowy@aosc.io>
Date: Thu Oct 25 17:23:02 2018 +0800
sunxi: disable Pine A64 model detection code on other boards
breaks building of all other sunxi boards:
arm: + orangepi_plus2e
+(orangepi_plus2e) board/sunxi/board.c:836:1: error: expected identifier or '(' before '}' token
+(orangepi_plus2e) }
+(orangepi_plus2e) ^
+(orangepi_plus2e) make[2]: *** [board/sunxi/board.o] Error 1
+(orangepi_plus2e) make[1]: *** [board/sunxi] Error 2
+(orangepi_plus2e) make: *** [sub-make] Error 2
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181026/76e324dc/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-10-26 15:00 Jagan Teki
2018-10-26 17:08 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-10-26 15:00 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit 1ed3c0954bd160dafcad8847a51c3ddd5f992f51:
Merge branch 'master' of git://git.denx.de/u-boot-samsung (2018-10-23 21:13:32 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 1368d950e3ecef3dad3a76486c01ff514e66646d:
sunxi: store DRAM size in SPL header (2018-10-26 11:54:26 +0530)
----------------------------------------------------------------
Andre Przywara (3):
sunxi: Extend SPL header versioning
sunxi: board.c: refactor SPL header checks
sunxi: store DRAM size in SPL header
Icenowy Zheng (3):
sunxi: disable Pine A64 model detection code on other boards
sunxi: map DRAM part with 3G size
sunxi: add Kconfig option for the maximum accessible DRAM
Priit Laes (3):
sunxi: Fix typos of spelling Allwinner
sunxi: docs: Mention CONFIG_NAND requirement
sunxi: display: Mark sunxi_rgb2yuv_coef array as const
Vasily Khoruzhick (3):
pwm: sunxi: fix off-by-one that prevented PWM to use prescaler bypass
pwm: sunxi: use new prescaler when configuring PWM
pwm: sunxi: choose best prescaler to improve PWM resolution
arch/arm/include/asm/arch-sunxi/spl.h | 22 ++++++++---
arch/arm/mach-sunxi/Kconfig | 16 ++++++++
arch/arm/mach-sunxi/board.c | 2 +-
arch/arm/mach-sunxi/dram_sun4i.c | 2 +-
arch/arm/mach-sunxi/p2wi.c | 2 +-
board/sunxi/README.nand | 6 +--
board/sunxi/README.sunxi64 | 2 +-
board/sunxi/board.c | 74 +++++++++++++++++++++++++++++------
configs/pine64_plus_defconfig | 1 +
drivers/pwm/sunxi_pwm.c | 32 +++++++++------
drivers/video/sunxi/sunxi_display.c | 2 +-
11 files changed, 121 insertions(+), 40 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-10-12 6:16 Jagan Teki
@ 2018-10-15 12:41 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-10-15 12:41 UTC (permalink / raw)
To: u-boot
On Fri, Oct 12, 2018 at 11:46:36AM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit 0a60a81ba3860946551cb79aa6486aa076e357f3:
>
> Kconfig: sandbox: enable cmd_avb and dependencies (2018-10-07 13:34:19 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git sunxi
>
> for you to fetch changes up to 90de3969be48924114f2d725923e12f32bf7796e:
>
> sunxi: fix DRAM gate/reset sequence of H6 (2018-10-10 12:04:07 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181015/e5c12b31/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-10-12 6:16 Jagan Teki
2018-10-15 12:41 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-10-12 6:16 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit 0a60a81ba3860946551cb79aa6486aa076e357f3:
Kconfig: sandbox: enable cmd_avb and dependencies (2018-10-07 13:34:19 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git sunxi
for you to fetch changes up to 90de3969be48924114f2d725923e12f32bf7796e:
sunxi: fix DRAM gate/reset sequence of H6 (2018-10-10 12:04:07 +0530)
----------------------------------------------------------------
Icenowy Zheng (1):
sunxi: fix DRAM gate/reset sequence of H6
arch/arm/mach-sunxi/dram_sun50i_h6.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-09-28 16:44 Jagan Teki
@ 2018-09-30 2:27 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-09-30 2:27 UTC (permalink / raw)
To: u-boot
On Fri, Sep 28, 2018 at 10:14:28PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit bbef20d479441b01d62252cf127498c58078b2c3:
>
> Merge tag 'xilinx-for-v2018.11' of git://git.denx.de/u-boot-microblaze (2018-09-27 08:29:10 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 9ad93c0c968c8e6cd1273b73c44ec7262c616408:
>
> ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 (2018-09-28 22:09:24 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/c87d2b70/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-09-28 16:44 Jagan Teki
2018-09-30 2:27 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-09-28 16:44 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit bbef20d479441b01d62252cf127498c58078b2c3:
Merge tag 'xilinx-for-v2018.11' of git://git.denx.de/u-boot-microblaze (2018-09-27 08:29:10 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 9ad93c0c968c8e6cd1273b73c44ec7262c616408:
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3 (2018-09-28 22:09:24 +0530)
----------------------------------------------------------------
Jagan Teki (5):
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
ARM: dts: sun7i: Update A20 dts(i) files from Linux-v4.18-rc3
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
arch/arm/dts/axp209.dtsi | 17 +-
arch/arm/dts/sun4i-a10-a1000.dts | 61 +-
arch/arm/dts/sun4i-a10-ba10-tvbox.dts | 23 +-
arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts | 37 +-
arch/arm/dts/sun4i-a10-cubieboard.dts | 67 +-
arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts | 76 +-
arch/arm/dts/sun4i-a10-gemei-g9.dts | 28 +-
arch/arm/dts/sun4i-a10-hackberry.dts | 32 +-
arch/arm/dts/sun4i-a10-hyundai-a7hd.dts | 31 +-
arch/arm/dts/sun4i-a10-inet-3f.dts | 2 +-
arch/arm/dts/sun4i-a10-inet-3w.dts | 2 +-
arch/arm/dts/sun4i-a10-inet1.dts | 58 +-
arch/arm/dts/sun4i-a10-inet97fv2.dts | 41 +-
arch/arm/dts/sun4i-a10-inet9f-rev03.dts | 101 +-
arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts | 24 +-
arch/arm/dts/sun4i-a10-jesurun-q5.dts | 34 +-
arch/arm/dts/sun4i-a10-marsboard.dts | 38 +-
arch/arm/dts/sun4i-a10-mini-xplus.dts | 16 +-
arch/arm/dts/sun4i-a10-mk802.dts | 59 +-
arch/arm/dts/sun4i-a10-mk802ii.dts | 9 +-
arch/arm/dts/sun4i-a10-olinuxino-lime.dts | 75 +-
arch/arm/dts/sun4i-a10-pcduino.dts | 47 +-
arch/arm/dts/sun4i-a10-pcduino2.dts | 11 -
arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts | 89 +-
arch/arm/dts/sun4i-a10.dtsi | 1349 ++++++++----------
arch/arm/dts/sun5i-a10s-auxtek-t003.dts | 26 +-
arch/arm/dts/sun5i-a10s-auxtek-t004.dts | 42 +-
arch/arm/dts/sun5i-a10s-mk802.dts | 24 +-
arch/arm/dts/sun5i-a10s-olinuxino-micro.dts | 82 +-
arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts | 24 +-
arch/arm/dts/sun5i-a10s-wobo-i5.dts | 29 +-
arch/arm/dts/sun5i-a10s.dtsi | 224 +--
arch/arm/dts/sun5i-a13-empire-electronix-d709.dts | 29 +-
arch/arm/dts/sun5i-a13-hsg-h702.dts | 29 +-
arch/arm/dts/sun5i-a13-inet-98v-rev2.dts | 164 +--
arch/arm/dts/sun5i-a13-olinuxino-micro.dts | 44 +-
arch/arm/dts/sun5i-a13-olinuxino.dts | 100 +-
arch/arm/dts/sun5i-a13-utoo-p66.dts | 49 +-
arch/arm/dts/sun5i-a13.dtsi | 268 +---
arch/arm/dts/sun5i-gr8-chip-pro.dts | 16 +-
arch/arm/dts/sun5i-gr8.dtsi | 1082 +-------------
arch/arm/dts/sun5i-r8-chip.dts | 91 +-
arch/arm/dts/sun5i-r8.dtsi | 40 -
arch/arm/dts/sun5i-reference-design-tablet.dtsi | 69 +-
arch/arm/dts/sun5i.dtsi | 792 +++++-----
arch/arm/dts/sun6i-a31-app4-evb1.dts | 7 +-
arch/arm/dts/sun6i-a31-colombus.dts | 26 +-
arch/arm/dts/sun6i-a31-hummingbird.dts | 153 +-
arch/arm/dts/sun6i-a31-i7.dts | 82 +-
arch/arm/dts/sun6i-a31-m9.dts | 23 +-
arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts | 23 +-
arch/arm/dts/sun6i-a31.dtsi | 1151 +++++++++------
arch/arm/dts/sun6i-a31s-cs908.dts | 2 -
arch/arm/dts/sun6i-a31s-primo81.dts | 69 +-
arch/arm/dts/sun6i-a31s-sina31s-core.dtsi | 1 -
arch/arm/dts/sun6i-a31s-sina31s.dts | 77 +-
arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 154 +-
.../arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | 13 +-
arch/arm/dts/sun6i-a31s.dtsi | 8 +
arch/arm/dts/sun6i-reference-design-tablet.dtsi | 18 +-
arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts | 32 +-
arch/arm/dts/sun7i-a20-bananapi.dts | 106 +-
arch/arm/dts/sun7i-a20-bananapro.dts | 73 +-
arch/arm/dts/sun7i-a20-cubieboard2.dts | 56 +-
arch/arm/dts/sun7i-a20-cubietruck.dts | 84 +-
arch/arm/dts/sun7i-a20-hummingbird.dts | 30 +-
arch/arm/dts/sun7i-a20-i12-tvbox.dts | 34 +-
arch/arm/dts/sun7i-a20-icnova-swac.dts | 6 +-
arch/arm/dts/sun7i-a20-itead-ibox.dts | 12 +-
arch/arm/dts/sun7i-a20-lamobo-r1.dts | 73 +-
arch/arm/dts/sun7i-a20-m3.dts | 12 +-
arch/arm/dts/sun7i-a20-mk808c.dts | 43 +-
arch/arm/dts/sun7i-a20-olimex-som-evb.dts | 108 +-
arch/arm/dts/sun7i-a20-olimex-som204-evb.dts | 42 +-
arch/arm/dts/sun7i-a20-olinuxino-lime.dts | 58 +-
arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts | 6 +-
arch/arm/dts/sun7i-a20-olinuxino-lime2.dts | 154 +-
arch/arm/dts/sun7i-a20-olinuxino-micro.dts | 116 +-
arch/arm/dts/sun7i-a20-orangepi-mini.dts | 77 +-
arch/arm/dts/sun7i-a20-orangepi.dts | 42 +-
arch/arm/dts/sun7i-a20-pcduino3-nano.dts | 55 +-
arch/arm/dts/sun7i-a20-pcduino3.dts | 26 +-
arch/arm/dts/sun7i-a20-primo73.dts | 58 +-
arch/arm/dts/sun7i-a20-wexler-tab7200.dts | 30 +-
arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts | 20 +-
arch/arm/dts/sun7i-a20.dtsi | 1505 ++++++++------------
arch/arm/dts/sun8i-a23-a33.dtsi | 112 +-
arch/arm/dts/sun8i-a23-evb.dts | 11 +-
arch/arm/dts/sun8i-a23-gt90h-v4.dts | 5 +-
arch/arm/dts/sun8i-a23-inet86dz.dts | 6 +-
arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts | 34 +-
arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts | 25 +-
arch/arm/dts/sun8i-a23-q8-tablet.dts | 13 +
arch/arm/dts/sun8i-a23.dtsi | 4 +-
arch/arm/dts/sun8i-a33-ga10h-v1.1.dts | 5 +-
arch/arm/dts/sun8i-a33-inet-d978-rev2.dts | 29 +-
arch/arm/dts/sun8i-a33-olinuxino.dts | 66 +-
arch/arm/dts/sun8i-a33-sinlinx-sina33.dts | 53 +-
arch/arm/dts/sun8i-a33.dtsi | 63 +-
arch/arm/dts/sun8i-q8-common.dtsi | 30 +-
arch/arm/dts/sun8i-r16-bananapi-m2m.dts | 3 +-
.../dts/sun8i-r16-nintendo-nes-classic-edition.dts | 2 -
arch/arm/dts/sun8i-r16-parrot.dts | 50 +-
arch/arm/dts/sun8i-reference-design-tablet.dtsi | 59 +-
include/dt-bindings/clock/sun4i-a10-ccu.h | 202 +++
include/dt-bindings/clock/sun5i-ccu.h | 106 ++
include/dt-bindings/clock/sun6i-a31-ccu.h | 191 +++
include/dt-bindings/clock/sun7i-a20-ccu.h | 53 +
include/dt-bindings/reset/sun4i-a10-ccu.h | 69 +
include/dt-bindings/reset/sun5i-ccu.h | 32 +
include/dt-bindings/reset/sun6i-a31-ccu.h | 106 ++
111 files changed, 5506 insertions(+), 6039 deletions(-)
create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
create mode 100644 include/dt-bindings/clock/sun5i-ccu.h
create mode 100644 include/dt-bindings/clock/sun6i-a31-ccu.h
create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
create mode 100644 include/dt-bindings/reset/sun5i-ccu.h
create mode 100644 include/dt-bindings/reset/sun6i-a31-ccu.h
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-24 8:50 Jagan Teki
@ 2018-08-25 13:16 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-08-25 13:16 UTC (permalink / raw)
To: u-boot
On Fri, Aug 24, 2018 at 02:20:51PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit b71d9e8b3805305ea4116733f515061710ad7081:
>
> Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2018-08-20 13:41:56 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 12069bd0466a87015dd40bb25c6b2571ee5f0851:
>
> usb: musb-new: Call musb_platform_exit from musb_stop (2018-08-23 17:31:24 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180825/f23f15ae/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-08-24 8:50 Jagan Teki
2018-08-25 13:16 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-08-24 8:50 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit b71d9e8b3805305ea4116733f515061710ad7081:
Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2018-08-20 13:41:56 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 12069bd0466a87015dd40bb25c6b2571ee5f0851:
usb: musb-new: Call musb_platform_exit from musb_stop (2018-08-23 17:31:24 +0530)
----------------------------------------------------------------
Jagan Teki (5):
usb: musb-new: Fix improper musb host pointer
usb: musb-new: sunxi: Allocate struct phy in private
musb-new: sunxi: Access ahb_reset0_cfg via ccm offset
usb: musb-new: sunxi: Add proper musb exit support
usb: musb-new: Call musb_platform_exit from musb_stop
board/compulab/cm_t3517/cm_t3517.c | 4 +-
drivers/usb/musb-new/musb_core.c | 1 +
drivers/usb/musb-new/musb_uboot.c | 12 ++---
drivers/usb/musb-new/pic32.c | 6 ++-
drivers/usb/musb-new/sunxi.c | 107 ++++++++++++++++++++++---------------
include/linux/usb/musb.h | 4 +-
6 files changed, 80 insertions(+), 54 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-20 12:44 Jagan Teki
@ 2018-08-20 22:11 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-08-20 22:11 UTC (permalink / raw)
To: u-boot
On Mon, Aug 20, 2018 at 06:14:05PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit f05ebbf47a9dc863ff4bb084649ecb34d728b5f2:
>
> bcm968380gerg: Add MAINTAINERS file (2018-08-09 11:48:39 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to d8024074e43c2a99ecf93d919544d82f69025521:
>
> board: sunxi: Remove unused local variables (2018-08-20 18:10:43 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180820/6b84e548/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-08-20 12:44 Jagan Teki
2018-08-20 22:11 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-08-20 12:44 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit f05ebbf47a9dc863ff4bb084649ecb34d728b5f2:
bcm968380gerg: Add MAINTAINERS file (2018-08-09 11:48:39 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to d8024074e43c2a99ecf93d919544d82f69025521:
board: sunxi: Remove unused local variables (2018-08-20 18:10:43 +0530)
----------------------------------------------------------------
Andre Przywara (1):
sunxi: A64: fix default DRAM_ODT_EN symbol
Icenowy Zheng (1):
sunxi: fix sid base address macro name for H6
Jagan Teki (5):
clk: Kconfig: Ascending order to sub directiory kconfigs
ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3
ARM: dts: sun8i: Update R40/V40 dts(i) files from Linux-v4.18-rc3
configs: sun7i: Fix to use emmc dts for OLinuXino_MICRO-eMMC
board: sunxi: Remove unused local variables
arch/arm/dts/axp81x.dtsi | 169 +++++
arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts | 195 ++++-
arch/arm/dts/sun8i-a83t-bananapi-m3.dts | 298 +++++++-
arch/arm/dts/sun8i-a83t-cubietruck-plus.dts | 322 +++++++-
arch/arm/dts/sun8i-a83t-tbs-a711.dts | 355 ++++++++-
arch/arm/dts/sun8i-a83t.dtsi | 885 ++++++++++++++++++++--
arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts | 168 +++-
arch/arm/dts/sun8i-r40.dtsi | 303 +++++++-
arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | 50 ++
arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h | 2 +-
arch/arm/mach-sunxi/Kconfig | 1 -
board/sunxi/board.c | 2 -
configs/A20-OLinuXino_MICRO-eMMC_defconfig | 2 +-
configs/Bananapi_M2_Ultra_defconfig | 1 -
configs/amarula_a64_relic_defconfig | 1 -
configs/bananapi_m2_berry_defconfig | 1 -
configs/sopine_baseboard_defconfig | 1 -
drivers/clk/Kconfig | 8 +-
include/dt-bindings/clock/sun8i-a83t-ccu.h | 140 ++++
include/dt-bindings/reset/sun8i-a83t-ccu.h | 98 +++
20 files changed, 2874 insertions(+), 128 deletions(-)
create mode 100644 arch/arm/dts/axp81x.dtsi
create mode 100644 include/dt-bindings/clock/sun8i-a83t-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-a83t-ccu.h
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-07-31 18:11 Jagan Teki
2018-08-01 11:13 ` Tom Rini
@ 2018-08-05 11:59 ` Tom Rini
1 sibling, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-08-05 11:59 UTC (permalink / raw)
To: u-boot
On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
>
> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:
>
> board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180805/cc6152ce/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-04 18:58 ` Icenowy Zheng
@ 2018-08-04 20:11 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-08-04 20:11 UTC (permalink / raw)
To: u-boot
On Sun, Aug 05, 2018 at 02:58:46AM +0800, Icenowy Zheng wrote:
>
>
> 于 2018年8月5日 GMT+08:00 上午2:51:43, Tom Rini <trini@konsulko.com> 写到:
> >On Sat, Aug 04, 2018 at 11:18:43PM +0530, Jagan Teki wrote:
> >> On Thu, Aug 2, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
> >> > On Thu, Aug 02, 2018 at 02:57:01PM +0530, Jagan Teki wrote:
> >> >> On Wed, Aug 1, 2018 at 6:25 PM, Tom Rini <trini@konsulko.com>
> >wrote:
> >> >> > On Wed, Aug 01, 2018 at 08:43:17PM +0800, Chen-Yu Tsai wrote:
> >> >> >> On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki
> ><jagan@amarulasolutions.com> wrote:
> >> >> >> > On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com>
> >wrote:
> >> >> >> >> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
> >> >> >> >>
> >> >> >> >>> Hi Tom,
> >> >> >> >>>
> >> >> >> >>> Please pull this PR.
> >> >> >> >>>
> >> >> >> >>> thanks,
> >> >> >> >>> Jagan.
> >> >> >> >>>
> >> >> >> >>> The following changes since commit
> >5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
> >> >> >> >>>
> >> >> >> >>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
> >> >> >> >>>
> >> >> >> >>> are available in the Git repository at:
> >> >> >> >>>
> >> >> >> >>> git://git.denx.de/u-boot-sunxi.git master
> >> >> >> >>>
> >> >> >> >>> for you to fetch changes up to
> >89a897fc4d78e31332e5899e977d8bf3c82abafa:
> >> >> >> >>>
> >> >> >> >>> board: sun50i: h6: Add OrangePi One Plus initial support
> >(2018-07-31 20:50:01 +0530)
> >> >> >> >>>
> >> >> >> >>
> >> >> >> >> For the moment, on hold. pine_h64 doesn't link (see
> >> >> >> >> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet
> >Andre's
> >> >> >> >> changes to save some space on aarch64 will get it to fit in,
> >and I need
> >> >> >> >> to see if I'm ready to apply them.
> >> >> >> >
> >> >> >> > I though of inform the same, but for h6 atf need to use it
> >from
> >> >> >> > mainline here all a64 boards seems failing. I didn't
> >reproduce this
> >> >> >> > manually.
> >> >> >> >
> >> >> >> > +WARNING: BL31 file bl31.bin NOT found, resulting binary is
> >non-functional
> >> >> >>
> >> >> >> The cause is obvious. The ATF blob is missing from the
> >environment.
> >> >> >> If TravisCI is only used to test building, maybe we could just
> >put an
> >> >> >> empty bl31.bin there to make it happy.
> >> >> >
> >> >> > Please note that the above is NOT the problem. That's the
> >non-fatal
> >> >> > warning that your resulting binary won't work as there's no
> >bl31.bin.
> >> >> > The problem is:
> >> >> > +aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will
> >not fit in region `.sram'
> >> >> > +aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
> >> >> > +make[2]: *** [spl/u-boot-spl] Error 1
> >> >> > +make[1]: *** [spl/u-boot-spl] Error 2
> >> >> > +make: *** [sub-make] Error 2
> >> >>
> >> >> ie what, I'm able to built manually pine_h64 with gcc-6.3.1
> >> >
> >> > Travis-CI uses gcc-7.3 from kernel.org.
> >>
> >> Look like we have size issues wrt gcc versions, Icenowy tried glibc
> >> variant, 2018.07-3 bleeding edge and it work it seems. can't we
> >> upgrade Travis-CI to use the same or if not specific for h6?
> >
> >I'm testing Andre's series currently and that should resolve this
>
> Do you mention the exception handling series?
Yes.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180804/cc6446be/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-04 18:51 ` Tom Rini
2018-08-04 18:52 ` Icenowy Zheng
@ 2018-08-04 18:58 ` Icenowy Zheng
2018-08-04 20:11 ` Tom Rini
1 sibling, 1 reply; 125+ messages in thread
From: Icenowy Zheng @ 2018-08-04 18:58 UTC (permalink / raw)
To: u-boot
于 2018年8月5日 GMT+08:00 上午2:51:43, Tom Rini <trini@konsulko.com> 写到:
>On Sat, Aug 04, 2018 at 11:18:43PM +0530, Jagan Teki wrote:
>> On Thu, Aug 2, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
>> > On Thu, Aug 02, 2018 at 02:57:01PM +0530, Jagan Teki wrote:
>> >> On Wed, Aug 1, 2018 at 6:25 PM, Tom Rini <trini@konsulko.com>
>wrote:
>> >> > On Wed, Aug 01, 2018 at 08:43:17PM +0800, Chen-Yu Tsai wrote:
>> >> >> On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki
><jagan@amarulasolutions.com> wrote:
>> >> >> > On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com>
>wrote:
>> >> >> >> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
>> >> >> >>
>> >> >> >>> Hi Tom,
>> >> >> >>>
>> >> >> >>> Please pull this PR.
>> >> >> >>>
>> >> >> >>> thanks,
>> >> >> >>> Jagan.
>> >> >> >>>
>> >> >> >>> The following changes since commit
>5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
>> >> >> >>>
>> >> >> >>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
>> >> >> >>>
>> >> >> >>> are available in the Git repository at:
>> >> >> >>>
>> >> >> >>> git://git.denx.de/u-boot-sunxi.git master
>> >> >> >>>
>> >> >> >>> for you to fetch changes up to
>89a897fc4d78e31332e5899e977d8bf3c82abafa:
>> >> >> >>>
>> >> >> >>> board: sun50i: h6: Add OrangePi One Plus initial support
>(2018-07-31 20:50:01 +0530)
>> >> >> >>>
>> >> >> >>
>> >> >> >> For the moment, on hold. pine_h64 doesn't link (see
>> >> >> >> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet
>Andre's
>> >> >> >> changes to save some space on aarch64 will get it to fit in,
>and I need
>> >> >> >> to see if I'm ready to apply them.
>> >> >> >
>> >> >> > I though of inform the same, but for h6 atf need to use it
>from
>> >> >> > mainline here all a64 boards seems failing. I didn't
>reproduce this
>> >> >> > manually.
>> >> >> >
>> >> >> > +WARNING: BL31 file bl31.bin NOT found, resulting binary is
>non-functional
>> >> >>
>> >> >> The cause is obvious. The ATF blob is missing from the
>environment.
>> >> >> If TravisCI is only used to test building, maybe we could just
>put an
>> >> >> empty bl31.bin there to make it happy.
>> >> >
>> >> > Please note that the above is NOT the problem. That's the
>non-fatal
>> >> > warning that your resulting binary won't work as there's no
>bl31.bin.
>> >> > The problem is:
>> >> > +aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will
>not fit in region `.sram'
>> >> > +aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
>> >> > +make[2]: *** [spl/u-boot-spl] Error 1
>> >> > +make[1]: *** [spl/u-boot-spl] Error 2
>> >> > +make: *** [sub-make] Error 2
>> >>
>> >> ie what, I'm able to built manually pine_h64 with gcc-6.3.1
>> >
>> > Travis-CI uses gcc-7.3 from kernel.org.
>>
>> Look like we have size issues wrt gcc versions, Icenowy tried glibc
>> variant, 2018.07-3 bleeding edge and it work it seems. can't we
>> upgrade Travis-CI to use the same or if not specific for h6?
>
>I'm testing Andre's series currently and that should resolve this
Do you mention the exception handling series?
BTW I made a patch to save ~200B, purely in sunxi codepath,
simple, easier to review, and may solve the problem more quickly.
I have sent the patch, it's named "sunxi: disable Pine A64
model detection code on non-A64 SoCs".
>problem. But no, Travis-CI is using the toolchains that buildman
>fetches and those are the must-work toolchains. It's the kernel.org
>ones that Arnd sets up and are as vendor-neutral as we're going to get.
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-04 18:51 ` Tom Rini
@ 2018-08-04 18:52 ` Icenowy Zheng
2018-08-04 18:58 ` Icenowy Zheng
1 sibling, 0 replies; 125+ messages in thread
From: Icenowy Zheng @ 2018-08-04 18:52 UTC (permalink / raw)
To: u-boot
于 2018年8月5日 GMT+08:00 上午2:51:43, Tom Rini <trini@konsulko.com> 写到:
>On Sat, Aug 04, 2018 at 11:18:43PM +0530, Jagan Teki wrote:
>> On Thu, Aug 2, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
>> > On Thu, Aug 02, 2018 at 02:57:01PM +0530, Jagan Teki wrote:
>> >> On Wed, Aug 1, 2018 at 6:25 PM, Tom Rini <trini@konsulko.com>
>wrote:
>> >> > On Wed, Aug 01, 2018 at 08:43:17PM +0800, Chen-Yu Tsai wrote:
>> >> >> On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki
><jagan@amarulasolutions.com> wrote:
>> >> >> > On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com>
>wrote:
>> >> >> >> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
>> >> >> >>
>> >> >> >>> Hi Tom,
>> >> >> >>>
>> >> >> >>> Please pull this PR.
>> >> >> >>>
>> >> >> >>> thanks,
>> >> >> >>> Jagan.
>> >> >> >>>
>> >> >> >>> The following changes since commit
>5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
>> >> >> >>>
>> >> >> >>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
>> >> >> >>>
>> >> >> >>> are available in the Git repository at:
>> >> >> >>>
>> >> >> >>> git://git.denx.de/u-boot-sunxi.git master
>> >> >> >>>
>> >> >> >>> for you to fetch changes up to
>89a897fc4d78e31332e5899e977d8bf3c82abafa:
>> >> >> >>>
>> >> >> >>> board: sun50i: h6: Add OrangePi One Plus initial support
>(2018-07-31 20:50:01 +0530)
>> >> >> >>>
>> >> >> >>
>> >> >> >> For the moment, on hold. pine_h64 doesn't link (see
>> >> >> >> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet
>Andre's
>> >> >> >> changes to save some space on aarch64 will get it to fit in,
>and I need
>> >> >> >> to see if I'm ready to apply them.
>> >> >> >
>> >> >> > I though of inform the same, but for h6 atf need to use it
>from
>> >> >> > mainline here all a64 boards seems failing. I didn't
>reproduce this
>> >> >> > manually.
>> >> >> >
>> >> >> > +WARNING: BL31 file bl31.bin NOT found, resulting binary is
>non-functional
>> >> >>
>> >> >> The cause is obvious. The ATF blob is missing from the
>environment.
>> >> >> If TravisCI is only used to test building, maybe we could just
>put an
>> >> >> empty bl31.bin there to make it happy.
>> >> >
>> >> > Please note that the above is NOT the problem. That's the
>non-fatal
>> >> > warning that your resulting binary won't work as there's no
>bl31.bin.
>> >> > The problem is:
>> >> > +aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will
>not fit in region `.sram'
>> >> > +aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
>> >> > +make[2]: *** [spl/u-boot-spl] Error 1
>> >> > +make[1]: *** [spl/u-boot-spl] Error 2
>> >> > +make: *** [sub-make] Error 2
>> >>
>> >> ie what, I'm able to built manually pine_h64 with gcc-6.3.1
>> >
>> > Travis-CI uses gcc-7.3 from kernel.org.
>>
>> Look like we have size issues wrt gcc versions, Icenowy tried glibc
>> variant, 2018.07-3 bleeding edge and it work it seems. can't we
>> upgrade Travis-CI to use the same or if not specific for h6?
>
>I'm testing Andre's series currently and that should resolve this
BTW where's this series?
>problem. But no, Travis-CI is using the toolchains that buildman
>fetches and those are the must-work toolchains. It's the kernel.org
>ones that Arnd sets up and are as vendor-neutral as we're going to get.
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-04 17:48 ` Jagan Teki
2018-08-04 17:52 ` Icenowy Zheng
2018-08-04 18:34 ` Icenowy Zheng
@ 2018-08-04 18:51 ` Tom Rini
2018-08-04 18:52 ` Icenowy Zheng
2018-08-04 18:58 ` Icenowy Zheng
2 siblings, 2 replies; 125+ messages in thread
From: Tom Rini @ 2018-08-04 18:51 UTC (permalink / raw)
To: u-boot
On Sat, Aug 04, 2018 at 11:18:43PM +0530, Jagan Teki wrote:
> On Thu, Aug 2, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
> > On Thu, Aug 02, 2018 at 02:57:01PM +0530, Jagan Teki wrote:
> >> On Wed, Aug 1, 2018 at 6:25 PM, Tom Rini <trini@konsulko.com> wrote:
> >> > On Wed, Aug 01, 2018 at 08:43:17PM +0800, Chen-Yu Tsai wrote:
> >> >> On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> >> >> > On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
> >> >> >> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
> >> >> >>
> >> >> >>> Hi Tom,
> >> >> >>>
> >> >> >>> Please pull this PR.
> >> >> >>>
> >> >> >>> thanks,
> >> >> >>> Jagan.
> >> >> >>>
> >> >> >>> The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
> >> >> >>>
> >> >> >>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
> >> >> >>>
> >> >> >>> are available in the Git repository at:
> >> >> >>>
> >> >> >>> git://git.denx.de/u-boot-sunxi.git master
> >> >> >>>
> >> >> >>> for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:
> >> >> >>>
> >> >> >>> board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)
> >> >> >>>
> >> >> >>
> >> >> >> For the moment, on hold. pine_h64 doesn't link (see
> >> >> >> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's
> >> >> >> changes to save some space on aarch64 will get it to fit in, and I need
> >> >> >> to see if I'm ready to apply them.
> >> >> >
> >> >> > I though of inform the same, but for h6 atf need to use it from
> >> >> > mainline here all a64 boards seems failing. I didn't reproduce this
> >> >> > manually.
> >> >> >
> >> >> > +WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
> >> >>
> >> >> The cause is obvious. The ATF blob is missing from the environment.
> >> >> If TravisCI is only used to test building, maybe we could just put an
> >> >> empty bl31.bin there to make it happy.
> >> >
> >> > Please note that the above is NOT the problem. That's the non-fatal
> >> > warning that your resulting binary won't work as there's no bl31.bin.
> >> > The problem is:
> >> > +aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
> >> > +aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
> >> > +make[2]: *** [spl/u-boot-spl] Error 1
> >> > +make[1]: *** [spl/u-boot-spl] Error 2
> >> > +make: *** [sub-make] Error 2
> >>
> >> ie what, I'm able to built manually pine_h64 with gcc-6.3.1
> >
> > Travis-CI uses gcc-7.3 from kernel.org.
>
> Look like we have size issues wrt gcc versions, Icenowy tried glibc
> variant, 2018.07-3 bleeding edge and it work it seems. can't we
> upgrade Travis-CI to use the same or if not specific for h6?
I'm testing Andre's series currently and that should resolve this
problem. But no, Travis-CI is using the toolchains that buildman
fetches and those are the must-work toolchains. It's the kernel.org
ones that Arnd sets up and are as vendor-neutral as we're going to get.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180804/62b3670f/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-04 17:48 ` Jagan Teki
2018-08-04 17:52 ` Icenowy Zheng
@ 2018-08-04 18:34 ` Icenowy Zheng
2018-08-04 18:51 ` Tom Rini
2 siblings, 0 replies; 125+ messages in thread
From: Icenowy Zheng @ 2018-08-04 18:34 UTC (permalink / raw)
To: u-boot
于 2018年8月5日 GMT+08:00 上午1:48:43, Jagan Teki <jagan@amarulasolutions.com> 写到:
>On Thu, Aug 2, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
>> On Thu, Aug 02, 2018 at 02:57:01PM +0530, Jagan Teki wrote:
>>> On Wed, Aug 1, 2018 at 6:25 PM, Tom Rini <trini@konsulko.com> wrote:
>>> > On Wed, Aug 01, 2018 at 08:43:17PM +0800, Chen-Yu Tsai wrote:
>>> >> On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki
><jagan@amarulasolutions.com> wrote:
>>> >> > On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com>
>wrote:
>>> >> >> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
>>> >> >>
>>> >> >>> Hi Tom,
>>> >> >>>
>>> >> >>> Please pull this PR.
>>> >> >>>
>>> >> >>> thanks,
>>> >> >>> Jagan.
>>> >> >>>
>>> >> >>> The following changes since commit
>5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
>>> >> >>>
>>> >> >>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
>>> >> >>>
>>> >> >>> are available in the Git repository at:
>>> >> >>>
>>> >> >>> git://git.denx.de/u-boot-sunxi.git master
>>> >> >>>
>>> >> >>> for you to fetch changes up to
>89a897fc4d78e31332e5899e977d8bf3c82abafa:
>>> >> >>>
>>> >> >>> board: sun50i: h6: Add OrangePi One Plus initial support
>(2018-07-31 20:50:01 +0530)
>>> >> >>>
>>> >> >>
>>> >> >> For the moment, on hold. pine_h64 doesn't link (see
>>> >> >> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet
>Andre's
>>> >> >> changes to save some space on aarch64 will get it to fit in,
>and I need
>>> >> >> to see if I'm ready to apply them.
>>> >> >
>>> >> > I though of inform the same, but for h6 atf need to use it from
>>> >> > mainline here all a64 boards seems failing. I didn't reproduce
>this
>>> >> > manually.
>>> >> >
>>> >> > +WARNING: BL31 file bl31.bin NOT found, resulting binary is
>non-functional
>>> >>
>>> >> The cause is obvious. The ATF blob is missing from the
>environment.
>>> >> If TravisCI is only used to test building, maybe we could just
>put an
>>> >> empty bl31.bin there to make it happy.
>>> >
>>> > Please note that the above is NOT the problem. That's the
>non-fatal
>>> > warning that your resulting binary won't work as there's no
>bl31.bin.
>>> > The problem is:
>>> > +aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not
>fit in region `.sram'
>>> > +aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
>>> > +make[2]: *** [spl/u-boot-spl] Error 1
>>> > +make[1]: *** [spl/u-boot-spl] Error 2
>>> > +make: *** [sub-make] Error 2
>>>
>>> ie what, I'm able to built manually pine_h64 with gcc-6.3.1
>>
>> Travis-CI uses gcc-7.3 from kernel.org.
>
>Look like we have size issues wrt gcc versions, Icenowy tried glibc
>variant, 2018.07-3 bleeding edge and it work it seems. can't we
>upgrade Travis-CI to use the same or if not specific for h6?
I will soon push a patch that disables Pine A64 plus/non-plus
detection code on non-A64 SoCs (clearly these code doesn't
apply to H5/H6, as there's no Pine A64/Pine A64+ with H5/H6 :-) )
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-04 17:48 ` Jagan Teki
@ 2018-08-04 17:52 ` Icenowy Zheng
2018-08-04 18:34 ` Icenowy Zheng
2018-08-04 18:51 ` Tom Rini
2 siblings, 0 replies; 125+ messages in thread
From: Icenowy Zheng @ 2018-08-04 17:52 UTC (permalink / raw)
To: u-boot
于 2018年8月5日 GMT+08:00 上午1:48:43, Jagan Teki <jagan@amarulasolutions.com> 写到:
>On Thu, Aug 2, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
>> On Thu, Aug 02, 2018 at 02:57:01PM +0530, Jagan Teki wrote:
>>> On Wed, Aug 1, 2018 at 6:25 PM, Tom Rini <trini@konsulko.com> wrote:
>>> > On Wed, Aug 01, 2018 at 08:43:17PM +0800, Chen-Yu Tsai wrote:
>>> >> On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki
><jagan@amarulasolutions.com> wrote:
>>> >> > On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com>
>wrote:
>>> >> >> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
>>> >> >>
>>> >> >>> Hi Tom,
>>> >> >>>
>>> >> >>> Please pull this PR.
>>> >> >>>
>>> >> >>> thanks,
>>> >> >>> Jagan.
>>> >> >>>
>>> >> >>> The following changes since commit
>5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
>>> >> >>>
>>> >> >>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
>>> >> >>>
>>> >> >>> are available in the Git repository at:
>>> >> >>>
>>> >> >>> git://git.denx.de/u-boot-sunxi.git master
>>> >> >>>
>>> >> >>> for you to fetch changes up to
>89a897fc4d78e31332e5899e977d8bf3c82abafa:
>>> >> >>>
>>> >> >>> board: sun50i: h6: Add OrangePi One Plus initial support
>(2018-07-31 20:50:01 +0530)
>>> >> >>>
>>> >> >>
>>> >> >> For the moment, on hold. pine_h64 doesn't link (see
>>> >> >> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet
>Andre's
>>> >> >> changes to save some space on aarch64 will get it to fit in,
>and I need
>>> >> >> to see if I'm ready to apply them.
>>> >> >
>>> >> > I though of inform the same, but for h6 atf need to use it from
>>> >> > mainline here all a64 boards seems failing. I didn't reproduce
>this
>>> >> > manually.
>>> >> >
>>> >> > +WARNING: BL31 file bl31.bin NOT found, resulting binary is
>non-functional
>>> >>
>>> >> The cause is obvious. The ATF blob is missing from the
>environment.
>>> >> If TravisCI is only used to test building, maybe we could just
>put an
>>> >> empty bl31.bin there to make it happy.
>>> >
>>> > Please note that the above is NOT the problem. That's the
>non-fatal
>>> > warning that your resulting binary won't work as there's no
>bl31.bin.
>>> > The problem is:
>>> > +aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not
>fit in region `.sram'
>>> > +aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
>>> > +make[2]: *** [spl/u-boot-spl] Error 1
>>> > +make[1]: *** [spl/u-boot-spl] Error 2
>>> > +make: *** [sub-make] Error 2
>>>
>>> ie what, I'm able to built manually pine_h64 with gcc-6.3.1
>>
>> Travis-CI uses gcc-7.3 from kernel.org.
>
>Look like we have size issues wrt gcc versions, Icenowy tried glibc
>variant, 2018.07-3 bleeding edge and it work it seems. can't we
>upgrade Travis-CI to use the same or if not specific for h6?
I have a commit from Vasily that can reduce ~100B of SPL.
It can be applied to workaround this, but I don't want to use it so early.
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-02 11:13 ` Tom Rini
@ 2018-08-04 17:48 ` Jagan Teki
2018-08-04 17:52 ` Icenowy Zheng
` (2 more replies)
0 siblings, 3 replies; 125+ messages in thread
From: Jagan Teki @ 2018-08-04 17:48 UTC (permalink / raw)
To: u-boot
On Thu, Aug 2, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
> On Thu, Aug 02, 2018 at 02:57:01PM +0530, Jagan Teki wrote:
>> On Wed, Aug 1, 2018 at 6:25 PM, Tom Rini <trini@konsulko.com> wrote:
>> > On Wed, Aug 01, 2018 at 08:43:17PM +0800, Chen-Yu Tsai wrote:
>> >> On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>> >> > On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
>> >> >> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
>> >> >>
>> >> >>> Hi Tom,
>> >> >>>
>> >> >>> Please pull this PR.
>> >> >>>
>> >> >>> thanks,
>> >> >>> Jagan.
>> >> >>>
>> >> >>> The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
>> >> >>>
>> >> >>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
>> >> >>>
>> >> >>> are available in the Git repository at:
>> >> >>>
>> >> >>> git://git.denx.de/u-boot-sunxi.git master
>> >> >>>
>> >> >>> for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:
>> >> >>>
>> >> >>> board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)
>> >> >>>
>> >> >>
>> >> >> For the moment, on hold. pine_h64 doesn't link (see
>> >> >> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's
>> >> >> changes to save some space on aarch64 will get it to fit in, and I need
>> >> >> to see if I'm ready to apply them.
>> >> >
>> >> > I though of inform the same, but for h6 atf need to use it from
>> >> > mainline here all a64 boards seems failing. I didn't reproduce this
>> >> > manually.
>> >> >
>> >> > +WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
>> >>
>> >> The cause is obvious. The ATF blob is missing from the environment.
>> >> If TravisCI is only used to test building, maybe we could just put an
>> >> empty bl31.bin there to make it happy.
>> >
>> > Please note that the above is NOT the problem. That's the non-fatal
>> > warning that your resulting binary won't work as there's no bl31.bin.
>> > The problem is:
>> > +aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
>> > +aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
>> > +make[2]: *** [spl/u-boot-spl] Error 1
>> > +make[1]: *** [spl/u-boot-spl] Error 2
>> > +make: *** [sub-make] Error 2
>>
>> ie what, I'm able to built manually pine_h64 with gcc-6.3.1
>
> Travis-CI uses gcc-7.3 from kernel.org.
Look like we have size issues wrt gcc versions, Icenowy tried glibc
variant, 2018.07-3 bleeding edge and it work it seems. can't we
upgrade Travis-CI to use the same or if not specific for h6?
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-02 9:27 ` Jagan Teki
@ 2018-08-02 11:13 ` Tom Rini
2018-08-04 17:48 ` Jagan Teki
0 siblings, 1 reply; 125+ messages in thread
From: Tom Rini @ 2018-08-02 11:13 UTC (permalink / raw)
To: u-boot
On Thu, Aug 02, 2018 at 02:57:01PM +0530, Jagan Teki wrote:
> On Wed, Aug 1, 2018 at 6:25 PM, Tom Rini <trini@konsulko.com> wrote:
> > On Wed, Aug 01, 2018 at 08:43:17PM +0800, Chen-Yu Tsai wrote:
> >> On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> >> > On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
> >> >> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
> >> >>
> >> >>> Hi Tom,
> >> >>>
> >> >>> Please pull this PR.
> >> >>>
> >> >>> thanks,
> >> >>> Jagan.
> >> >>>
> >> >>> The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
> >> >>>
> >> >>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
> >> >>>
> >> >>> are available in the Git repository at:
> >> >>>
> >> >>> git://git.denx.de/u-boot-sunxi.git master
> >> >>>
> >> >>> for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:
> >> >>>
> >> >>> board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)
> >> >>>
> >> >>
> >> >> For the moment, on hold. pine_h64 doesn't link (see
> >> >> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's
> >> >> changes to save some space on aarch64 will get it to fit in, and I need
> >> >> to see if I'm ready to apply them.
> >> >
> >> > I though of inform the same, but for h6 atf need to use it from
> >> > mainline here all a64 boards seems failing. I didn't reproduce this
> >> > manually.
> >> >
> >> > +WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
> >>
> >> The cause is obvious. The ATF blob is missing from the environment.
> >> If TravisCI is only used to test building, maybe we could just put an
> >> empty bl31.bin there to make it happy.
> >
> > Please note that the above is NOT the problem. That's the non-fatal
> > warning that your resulting binary won't work as there's no bl31.bin.
> > The problem is:
> > +aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
> > +aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
> > +make[2]: *** [spl/u-boot-spl] Error 1
> > +make[1]: *** [spl/u-boot-spl] Error 2
> > +make: *** [sub-make] Error 2
>
> ie what, I'm able to built manually pine_h64 with gcc-6.3.1
Travis-CI uses gcc-7.3 from kernel.org.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180802/ff0441b8/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-01 12:55 ` Tom Rini
2018-08-01 12:58 ` Chen-Yu Tsai
@ 2018-08-02 9:27 ` Jagan Teki
2018-08-02 11:13 ` Tom Rini
1 sibling, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-08-02 9:27 UTC (permalink / raw)
To: u-boot
On Wed, Aug 1, 2018 at 6:25 PM, Tom Rini <trini@konsulko.com> wrote:
> On Wed, Aug 01, 2018 at 08:43:17PM +0800, Chen-Yu Tsai wrote:
>> On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>> > On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
>> >> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
>> >>
>> >>> Hi Tom,
>> >>>
>> >>> Please pull this PR.
>> >>>
>> >>> thanks,
>> >>> Jagan.
>> >>>
>> >>> The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
>> >>>
>> >>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
>> >>>
>> >>> are available in the Git repository at:
>> >>>
>> >>> git://git.denx.de/u-boot-sunxi.git master
>> >>>
>> >>> for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:
>> >>>
>> >>> board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)
>> >>>
>> >>
>> >> For the moment, on hold. pine_h64 doesn't link (see
>> >> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's
>> >> changes to save some space on aarch64 will get it to fit in, and I need
>> >> to see if I'm ready to apply them.
>> >
>> > I though of inform the same, but for h6 atf need to use it from
>> > mainline here all a64 boards seems failing. I didn't reproduce this
>> > manually.
>> >
>> > +WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
>>
>> The cause is obvious. The ATF blob is missing from the environment.
>> If TravisCI is only used to test building, maybe we could just put an
>> empty bl31.bin there to make it happy.
>
> Please note that the above is NOT the problem. That's the non-fatal
> warning that your resulting binary won't work as there's no bl31.bin.
> The problem is:
> +aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
> +aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
> +make[2]: *** [spl/u-boot-spl] Error 1
> +make[1]: *** [spl/u-boot-spl] Error 2
> +make: *** [sub-make] Error 2
ie what, I'm able to built manually pine_h64 with gcc-6.3.1
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-01 12:58 ` Chen-Yu Tsai
@ 2018-08-01 13:02 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-08-01 13:02 UTC (permalink / raw)
To: u-boot
On Wed, Aug 01, 2018 at 08:58:10PM +0800, Chen-Yu Tsai wrote:
> On Wed, Aug 1, 2018 at 8:55 PM, Tom Rini <trini@konsulko.com> wrote:
> > On Wed, Aug 01, 2018 at 08:43:17PM +0800, Chen-Yu Tsai wrote:
> >> On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> >> > On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
> >> >> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
> >> >>
> >> >>> Hi Tom,
> >> >>>
> >> >>> Please pull this PR.
> >> >>>
> >> >>> thanks,
> >> >>> Jagan.
> >> >>>
> >> >>> The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
> >> >>>
> >> >>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
> >> >>>
> >> >>> are available in the Git repository at:
> >> >>>
> >> >>> git://git.denx.de/u-boot-sunxi.git master
> >> >>>
> >> >>> for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:
> >> >>>
> >> >>> board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)
> >> >>>
> >> >>
> >> >> For the moment, on hold. pine_h64 doesn't link (see
> >> >> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's
> >> >> changes to save some space on aarch64 will get it to fit in, and I need
> >> >> to see if I'm ready to apply them.
> >> >
> >> > I though of inform the same, but for h6 atf need to use it from
> >> > mainline here all a64 boards seems failing. I didn't reproduce this
> >> > manually.
> >> >
> >> > +WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
> >>
> >> The cause is obvious. The ATF blob is missing from the environment.
> >> If TravisCI is only used to test building, maybe we could just put an
> >> empty bl31.bin there to make it happy.
> >
> > Please note that the above is NOT the problem. That's the non-fatal
> > warning that your resulting binary won't work as there's no bl31.bin.
> > The problem is:
> > +aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
> > +aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
> > +make[2]: *** [spl/u-boot-spl] Error 1
> > +make[1]: *** [spl/u-boot-spl] Error 2
> > +make: *** [sub-make] Error 2
>
> Yeah I noticed. Just pointing out if we want to get rid of the ATF noise.
Ah, no. The noise is very intentional so that it's clear to humans that
what they made won't boot.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180801/33d1c477/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-01 12:55 ` Tom Rini
@ 2018-08-01 12:58 ` Chen-Yu Tsai
2018-08-01 13:02 ` Tom Rini
2018-08-02 9:27 ` Jagan Teki
1 sibling, 1 reply; 125+ messages in thread
From: Chen-Yu Tsai @ 2018-08-01 12:58 UTC (permalink / raw)
To: u-boot
On Wed, Aug 1, 2018 at 8:55 PM, Tom Rini <trini@konsulko.com> wrote:
> On Wed, Aug 01, 2018 at 08:43:17PM +0800, Chen-Yu Tsai wrote:
>> On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>> > On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
>> >> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
>> >>
>> >>> Hi Tom,
>> >>>
>> >>> Please pull this PR.
>> >>>
>> >>> thanks,
>> >>> Jagan.
>> >>>
>> >>> The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
>> >>>
>> >>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
>> >>>
>> >>> are available in the Git repository at:
>> >>>
>> >>> git://git.denx.de/u-boot-sunxi.git master
>> >>>
>> >>> for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:
>> >>>
>> >>> board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)
>> >>>
>> >>
>> >> For the moment, on hold. pine_h64 doesn't link (see
>> >> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's
>> >> changes to save some space on aarch64 will get it to fit in, and I need
>> >> to see if I'm ready to apply them.
>> >
>> > I though of inform the same, but for h6 atf need to use it from
>> > mainline here all a64 boards seems failing. I didn't reproduce this
>> > manually.
>> >
>> > +WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
>>
>> The cause is obvious. The ATF blob is missing from the environment.
>> If TravisCI is only used to test building, maybe we could just put an
>> empty bl31.bin there to make it happy.
>
> Please note that the above is NOT the problem. That's the non-fatal
> warning that your resulting binary won't work as there's no bl31.bin.
> The problem is:
> +aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
> +aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
> +make[2]: *** [spl/u-boot-spl] Error 1
> +make[1]: *** [spl/u-boot-spl] Error 2
> +make: *** [sub-make] Error 2
Yeah I noticed. Just pointing out if we want to get rid of the ATF noise.
Thanks
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-01 12:43 ` Chen-Yu Tsai
@ 2018-08-01 12:55 ` Tom Rini
2018-08-01 12:58 ` Chen-Yu Tsai
2018-08-02 9:27 ` Jagan Teki
0 siblings, 2 replies; 125+ messages in thread
From: Tom Rini @ 2018-08-01 12:55 UTC (permalink / raw)
To: u-boot
On Wed, Aug 01, 2018 at 08:43:17PM +0800, Chen-Yu Tsai wrote:
> On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> > On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
> >> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
> >>
> >>> Hi Tom,
> >>>
> >>> Please pull this PR.
> >>>
> >>> thanks,
> >>> Jagan.
> >>>
> >>> The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
> >>>
> >>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
> >>>
> >>> are available in the Git repository at:
> >>>
> >>> git://git.denx.de/u-boot-sunxi.git master
> >>>
> >>> for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:
> >>>
> >>> board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)
> >>>
> >>
> >> For the moment, on hold. pine_h64 doesn't link (see
> >> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's
> >> changes to save some space on aarch64 will get it to fit in, and I need
> >> to see if I'm ready to apply them.
> >
> > I though of inform the same, but for h6 atf need to use it from
> > mainline here all a64 boards seems failing. I didn't reproduce this
> > manually.
> >
> > +WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
>
> The cause is obvious. The ATF blob is missing from the environment.
> If TravisCI is only used to test building, maybe we could just put an
> empty bl31.bin there to make it happy.
Please note that the above is NOT the problem. That's the non-fatal
warning that your resulting binary won't work as there's no bl31.bin.
The problem is:
+aarch64-linux-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
+aarch64-linux-ld.bfd: region `.sram' overflowed by 48 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180801/edd3a39d/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-01 11:47 ` Jagan Teki
@ 2018-08-01 12:43 ` Chen-Yu Tsai
2018-08-01 12:55 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Chen-Yu Tsai @ 2018-08-01 12:43 UTC (permalink / raw)
To: u-boot
On Wed, Aug 1, 2018 at 7:47 PM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
>> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
>>
>>> Hi Tom,
>>>
>>> Please pull this PR.
>>>
>>> thanks,
>>> Jagan.
>>>
>>> The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
>>>
>>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
>>>
>>> are available in the Git repository at:
>>>
>>> git://git.denx.de/u-boot-sunxi.git master
>>>
>>> for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:
>>>
>>> board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)
>>>
>>
>> For the moment, on hold. pine_h64 doesn't link (see
>> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's
>> changes to save some space on aarch64 will get it to fit in, and I need
>> to see if I'm ready to apply them.
>
> I though of inform the same, but for h6 atf need to use it from
> mainline here all a64 boards seems failing. I didn't reproduce this
> manually.
>
> +WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
The cause is obvious. The ATF blob is missing from the environment.
If TravisCI is only used to test building, maybe we could just put an
empty bl31.bin there to make it happy.
ChenYu
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-08-01 11:13 ` Tom Rini
@ 2018-08-01 11:47 ` Jagan Teki
2018-08-01 12:43 ` Chen-Yu Tsai
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-08-01 11:47 UTC (permalink / raw)
To: u-boot
On Wed, Aug 1, 2018 at 4:43 PM, Tom Rini <trini@konsulko.com> wrote:
> On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
>
>> Hi Tom,
>>
>> Please pull this PR.
>>
>> thanks,
>> Jagan.
>>
>> The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
>>
>> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
>>
>> are available in the Git repository at:
>>
>> git://git.denx.de/u-boot-sunxi.git master
>>
>> for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:
>>
>> board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)
>>
>
> For the moment, on hold. pine_h64 doesn't link (see
> https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's
> changes to save some space on aarch64 will get it to fit in, and I need
> to see if I'm ready to apply them.
I though of inform the same, but for h6 atf need to use it from
mainline here all a64 boards seems failing. I didn't reproduce this
manually.
+WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-07-31 18:11 Jagan Teki
@ 2018-08-01 11:13 ` Tom Rini
2018-08-01 11:47 ` Jagan Teki
2018-08-05 11:59 ` Tom Rini
1 sibling, 1 reply; 125+ messages in thread
From: Tom Rini @ 2018-08-01 11:13 UTC (permalink / raw)
To: u-boot
On Tue, Jul 31, 2018 at 11:41:50PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
>
> Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:
>
> board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)
>
For the moment, on hold. pine_h64 doesn't link (see
https://travis-ci.org/trini/u-boot/jobs/410579615) but I bet Andre's
changes to save some space on aarch64 will get it to fit in, and I need
to see if I'm ready to apply them.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180801/4ee7be20/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-07-31 18:11 Jagan Teki
2018-08-01 11:13 ` Tom Rini
2018-08-05 11:59 ` Tom Rini
0 siblings, 2 replies; 125+ messages in thread
From: Jagan Teki @ 2018-07-31 18:11 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit 5a0007d481c0fcd2d422dd48b2a129dd8e8a272a:
Prepare v2017.09-rc1 (2018-07-30 21:47:29 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 89a897fc4d78e31332e5899e977d8bf3c82abafa:
board: sun50i: h6: Add OrangePi One Plus initial support (2018-07-31 20:50:01 +0530)
----------------------------------------------------------------
Icenowy Zheng (14):
sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS
sunxi: add basic memory map definitions of H6 SoC
sunxi: change RMR64's RVBAR address for H6
sunxi: change ATF position for H6
sunxi: add config for SPL at 0x20000 on H6
sunxi: change GIC address on H6
sunxi: add clock code for H6
sunxi: use sun6i-style watchdog for H6
sunxi: add UART0 setup for H6
sunxi: add MMC support for H6
sunxi: add DRAM support to H6
sunxi: add support for Allwinner H6 SoC
sunxi: add support for Pine H64 board
video: sunxi: de2: fix SimpleFB node creation when DE2 not probed
Jagan Teki (5):
phy: sun4i-usb: Call phy_passby even for PHY#0
phy: sun4i-usb: Remove usb_clk_cfg set in probe
phy: sun4i-usb: Update PHY#3 rst_mask only for H3_H5
configs: sunxi: Drop CONFIG_SUNXI_USB_PHYS
board: sun50i: h6: Add OrangePi One Plus initial support
Mylène Josserand (2):
mtd: nand: nand_base: Convert EINVAL into ENOTSUPP
mtd: nand: sunxi: Return on set_feature only when not ENOTSUPP
Simon Baatz (1):
sunxi: enable SATA on Banana Pi M2 Berry
arch/arm/dts/Makefile | 3 +
arch/arm/dts/sun50i-h6-orangepi-one-plus.dts | 150 +++++
arch/arm/dts/sun50i-h6-pine-h64.dts | 185 ++++++
arch/arm/dts/sun50i-h6.dtsi | 288 +++++++++
arch/arm/include/asm/arch-sunxi/boot0.h | 4 +
arch/arm/include/asm/arch-sunxi/clock.h | 2 +
arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h | 320 +++++++++
arch/arm/include/asm/arch-sunxi/cpu.h | 2 +
arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h | 73 +++
arch/arm/include/asm/arch-sunxi/dram.h | 2 +
arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h | 297 +++++++++
arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
arch/arm/include/asm/arch-sunxi/mmc.h | 2 +-
arch/arm/include/asm/arch-sunxi/spl.h | 6 +-
arch/arm/include/asm/arch-sunxi/timer.h | 2 +-
arch/arm/mach-sunxi/Kconfig | 37 +-
arch/arm/mach-sunxi/Makefile | 2 +
arch/arm/mach-sunxi/board.c | 6 +-
arch/arm/mach-sunxi/clock_sun50i_h6.c | 94 +++
arch/arm/mach-sunxi/cpu_info.c | 2 +
arch/arm/mach-sunxi/dram_sun50i_h6.c | 755 ++++++++++++++++++++++
arch/arm/mach-sunxi/rmr_switch.S | 6 +
board/sunxi/MAINTAINERS | 10 +
board/sunxi/board.c | 7 +
board/sunxi/mksunxi_fit_atf.sh | 10 +-
common/spl/Kconfig | 2 +-
configs/bananapi_m2_berry_defconfig | 3 +
configs/orangepi_one_plus_defconfig | 14 +
configs/pine_h64_defconfig | 15 +
drivers/mmc/sunxi_mmc.c | 13 +-
drivers/mtd/nand/nand_base.c | 4 +-
drivers/mtd/nand/sunxi_nand.c | 2 +-
drivers/phy/allwinner/phy-sun4i-usb.c | 10 +-
drivers/video/sunxi/sunxi_de2.c | 3 +
include/configs/sun4i.h | 2 -
include/configs/sun50i.h | 7 +-
include/configs/sun5i.h | 2 -
include/configs/sun6i.h | 2 -
include/configs/sun7i.h | 2 -
include/configs/sun8i.h | 10 -
include/configs/sunxi-common.h | 24 +-
include/dt-bindings/clock/sun50i-h6-ccu.h | 125 ++++
include/dt-bindings/clock/sun50i-h6-r-ccu.h | 24 +
include/dt-bindings/reset/sun50i-h6-ccu.h | 73 +++
include/dt-bindings/reset/sun50i-h6-r-ccu.h | 17 +
scripts/config_whitelist.txt | 1 -
46 files changed, 2560 insertions(+), 61 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
create mode 100644 arch/arm/dts/sun50i-h6-pine-h64.dts
create mode 100644 arch/arm/dts/sun50i-h6.dtsi
create mode 100644 arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
create mode 100644 arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
create mode 100644 arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h
create mode 100644 arch/arm/mach-sunxi/clock_sun50i_h6.c
create mode 100644 arch/arm/mach-sunxi/dram_sun50i_h6.c
create mode 100644 configs/orangepi_one_plus_defconfig
create mode 100644 configs/pine_h64_defconfig
create mode 100644 include/dt-bindings/clock/sun50i-h6-ccu.h
create mode 100644 include/dt-bindings/clock/sun50i-h6-r-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-h6-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-h6-r-ccu.h
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-07-17 15:45 Jagan Teki
@ 2018-07-18 0:30 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-07-18 0:30 UTC (permalink / raw)
To: u-boot
On Tue, Jul 17, 2018 at 09:15:22PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit 5e9a9645816edcc68c09729f257e0c863292bf26:
>
> mach-stm32: Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET (2018-07-13 14:47:29 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 32f67bb7a15cec4afa117bd168265ece2107b0d6:
>
> sunxi: Enable eMMC on Libre Computer Board ALL-H3-CC boards (2018-07-17 21:07:34 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180717/affd6df0/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-07-17 15:45 Jagan Teki
2018-07-18 0:30 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-07-17 15:45 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit 5e9a9645816edcc68c09729f257e0c863292bf26:
mach-stm32: Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET (2018-07-13 14:47:29 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 32f67bb7a15cec4afa117bd168265ece2107b0d6:
sunxi: Enable eMMC on Libre Computer Board ALL-H3-CC boards (2018-07-17 21:07:34 +0530)
----------------------------------------------------------------
Adam Sampson (2):
dm: mmc: sunxi: Add A10/A20 compatible strings
dm: sunxi: Use DM for MMC and SATA on all A10 boards
Andre Przywara (6):
sunxi: DT: A64: update device tree file for Allwinner A64 SoC
sunxi: DT: A64: update board .dts files from Linux
sunxi: DT: update device tree files for Allwinner H3 and H5 SoCs
sunxi: DT: H5: update board .dts files from Linux
sunxi: DT: H3: update board .dts files from Linux
sunxi: DT: A64: add proper SoPine baseboard device tree
Chen-Yu Tsai (1):
sunxi: Enable eMMC on Libre Computer Board ALL-H3-CC boards
Lothar Felten (6):
sunxi: R40: add gigabit ethernet clocks
net: sun8i-emac: fix printing NULL character
net: sun8i-emac: set mux and clock by driver data
net: sun8i-emac: support R40 GMAC
sunxi: R40: add gigabit ethernet devicetree node
configs: Bananapi_M2_Ultra: enable gigabit ethernet
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/axp803.dtsi | 155 +++++
arch/arm/dts/sun50i-a64-bananapi-m64.dts | 195 +++++-
arch/arm/dts/sun50i-a64-nanopi-a64.dts | 111 ++-
arch/arm/dts/sun50i-a64-olinuxino.dts | 153 ++++-
arch/arm/dts/sun50i-a64-orangepi-win.dts | 135 +++-
arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi | 59 --
arch/arm/dts/sun50i-a64-pine64-plus.dts | 17 +-
arch/arm/dts/sun50i-a64-pine64.dts | 186 ++++-
arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 150 +++++
arch/arm/dts/sun50i-a64-sopine.dtsi | 142 ++++
arch/arm/dts/sun50i-a64.dtsi | 305 ++++++++-
arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts | 5 +-
arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts | 122 +++-
arch/arm/dts/sun50i-h5-nanopi-neo2.dts | 91 ++-
arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 151 ++++-
arch/arm/dts/sun50i-h5-orangepi-prime.dts | 176 ++++-
arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts | 64 +-
arch/arm/dts/sun50i-h5.dtsi | 38 +-
arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts | 55 +-
arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts | 96 ++-
arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts | 3 +-
arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts | 78 +++
arch/arm/dts/sun8i-h3-nanopi-m1.dts | 42 ++
arch/arm/dts/sun8i-h3-nanopi-neo-air.dts | 28 +-
arch/arm/dts/sun8i-h3-nanopi-neo.dts | 17 +
arch/arm/dts/sun8i-h3-nanopi.dtsi | 13 +-
arch/arm/dts/sun8i-h3-orangepi-2.dts | 92 ++-
arch/arm/dts/sun8i-h3-orangepi-lite.dts | 57 +-
arch/arm/dts/sun8i-h3-orangepi-one.dts | 116 +++-
arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts | 11 +-
arch/arm/dts/sun8i-h3-orangepi-pc.dts | 141 +++-
arch/arm/dts/sun8i-h3-orangepi-plus.dts | 29 +-
arch/arm/dts/sun8i-h3-orangepi-plus2e.dts | 15 +-
arch/arm/dts/sun8i-h3.dtsi | 602 +++--------------
arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts | 16 +
arch/arm/dts/sun8i-r40.dtsi | 34 +
arch/arm/dts/sunxi-h3-h5.dtsi | 860 ++++++++++++++++++++++++
arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi | 11 +-
arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 10 +-
arch/arm/mach-sunxi/Kconfig | 2 +
configs/Bananapi_M2_Ultra_defconfig | 4 +
configs/libretech_all_h3_cc_h2_plus_defconfig | 1 +
configs/libretech_all_h3_cc_h3_defconfig | 1 +
configs/libretech_all_h3_cc_h5_defconfig | 1 +
configs/sopine_baseboard_defconfig | 2 +-
drivers/mmc/sunxi_mmc.c | 2 +
drivers/net/sun8i_emac.c | 115 ++--
include/dt-bindings/clock/sun8i-de2.h | 18 +
include/dt-bindings/clock/sun8i-r-ccu.h | 59 ++
include/dt-bindings/reset/sun8i-de2.h | 14 +
include/dt-bindings/reset/sun8i-r-ccu.h | 53 ++
52 files changed, 3893 insertions(+), 963 deletions(-)
create mode 100644 arch/arm/dts/axp803.dtsi
delete mode 100644 arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi
create mode 100644 arch/arm/dts/sun50i-a64-sopine-baseboard.dts
create mode 100644 arch/arm/dts/sun50i-a64-sopine.dtsi
create mode 100644 arch/arm/dts/sunxi-h3-h5.dtsi
create mode 100644 include/dt-bindings/clock/sun8i-de2.h
create mode 100644 include/dt-bindings/clock/sun8i-r-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-de2.h
create mode 100644 include/dt-bindings/reset/sun8i-r-ccu.h
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-07-03 16:39 Jagan Teki
@ 2018-07-04 16:28 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-07-04 16:28 UTC (permalink / raw)
To: u-boot
On Tue, Jul 03, 2018 at 10:09:09PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit f58e779513be36e30ce46838fb467e12ac6a5539:
>
> Merge tag 'arc-updates-for-2018.07-rc2' of git://git.denx.de/u-boot-arc (2018-06-15 09:38:16 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to be0d217952222b2bd3ed071de9bb0c66d8cc80d9:
>
> arm: timer: sunxi: add Allwinner timer erratum workaround (2018-07-03 22:00:00 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180704/df3b5c3e/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-07-03 16:39 Jagan Teki
2018-07-04 16:28 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-07-03 16:39 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit f58e779513be36e30ce46838fb467e12ac6a5539:
Merge tag 'arc-updates-for-2018.07-rc2' of git://git.denx.de/u-boot-arc (2018-06-15 09:38:16 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to be0d217952222b2bd3ed071de9bb0c66d8cc80d9:
arm: timer: sunxi: add Allwinner timer erratum workaround (2018-07-03 22:00:00 +0530)
----------------------------------------------------------------
Andre Przywara (2):
arm: timer: factor out FSL arch timer erratum workaround
arm: timer: sunxi: add Allwinner timer erratum workaround
Hauke Mehrtens (2):
sun8i: h2: Add initial Orange Pi R1 support
sun50i: h5: Add initial Orange Pi Zero Plus support
arch/arm/cpu/armv8/generic_timer.c | 55 ++++++++--
arch/arm/dts/Makefile | 2 +
arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts | 145 ++++++++++++++++++++++++++
arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 101 ++++++++++++++++++
arch/arm/mach-sunxi/Kconfig | 4 +
board/sunxi/MAINTAINERS | 10 ++
configs/orangepi_r1_defconfig | 16 +++
configs/orangepi_zero_plus_defconfig | 16 +++
8 files changed, 343 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
create mode 100644 arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
create mode 100644 configs/orangepi_r1_defconfig
create mode 100644 configs/orangepi_zero_plus_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-06-04 12:43 Jagan Teki
@ 2018-06-04 15:09 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-06-04 15:09 UTC (permalink / raw)
To: u-boot
On Mon, Jun 04, 2018 at 06:13:56PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit 8730d012c9bd92d6412b3ef6e33b40c5df00f225:
>
> Merge tag 'arc-uart-updates-for-2018.07-rc1' of git://git.denx.de/u-boot-arc (2018-05-24 09:54:25 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 2e8dbe14e766deae16c75f357f926f08b881dc66:
>
> board: sun50i: Add Amarula A64-Relic initial support (2018-06-04 18:09:25 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180604/2227bdc1/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-06-04 12:43 Jagan Teki
2018-06-04 15:09 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-06-04 12:43 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit 8730d012c9bd92d6412b3ef6e33b40c5df00f225:
Merge tag 'arc-uart-updates-for-2018.07-rc1' of git://git.denx.de/u-boot-arc (2018-05-24 09:54:25 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 2e8dbe14e766deae16c75f357f926f08b881dc66:
board: sun50i: Add Amarula A64-Relic initial support (2018-06-04 18:09:25 +0530)
----------------------------------------------------------------
Chen-Yu Tsai (1):
sunxi: clock: Fix OHCI clock gating for H3/H5
Jagan Teki (34):
usb: sunxi: Simplify ccm reg base code
musb: sunxi: Add proper macros instead of numericals
musb: sunxi: Use simple way to fill musb_hdrc pdata
musb: sunxi: Add fifo config
sunxi: clock: Fix clock gating for H3/H5/A64
musb: sunxi: Add OTG device clkgate and reset for H3/H5
musb: sunxi: Use BIT instead of numerical shift
musb: sunxi: Add support for H3/H5/A64
phy: Add Allwinner A64 USB PHY driver
phy: sun4i-usb: Add id_detect and vbus_detect ops
phy: sun4i-usb: Add H3/H5 PHY config
phy: sun4i-usb: Add V3S PHY config
phy: sun4i-usb: Add A83T USB PHY config
phy: sun4i-usb: Add A10/A13/A20 PHY config
phy: sun4i-usb: Add A31 PHY config
phy: sun4i-usb: Add A33 USB PHY config
phy: sun4i-usb: Add A23 USB PHY config
device-tree-bindings: phy: Sync sun4i-usb-phy bindings
board: sunxi: Use generic-phy for board_usb_cable_connected
phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect
usb: sunxi: Switch to use generic-phy
sunxi: Drop legacy usb_phy.c
arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux
configs: bananapi-m64: Enable USB OTG peripheral mode
ARM: dts: sun8i: a83t: Sync usbphy node from Linux
arm64: allwinner: a64: bananapi-m64: Sync usb host nodes from Linux
ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg nodes from Linux
configs: bananapi-m2-plus: Enable USB OTG peripheral mode
arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic
arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux
configs: orangepi-pc2: Enable USB OTG peripheral mode
arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux
configs: orangepi-prime: Enable USB OTG peripheral mode
board: sun50i: Add Amarula A64-Relic initial support
Jun Nie (1):
sunxi: h3: Sync OTG and HCI nodes from Linux DT
Maxime Ripard (1):
Revert "sunxi: binman: Add U-Boot binary size check"
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun50i-a64-amarula-relic.dts | 65 +++
arch/arm/dts/sun50i-a64-bananapi-m64.dts | 26 ++
arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 59 ++-
arch/arm/dts/sun50i-h5-orangepi-prime.dts | 13 +
arch/arm/dts/sun8i-a83t.dtsi | 20 +
arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts | 13 +
arch/arm/dts/sun8i-h3.dtsi | 32 ++
arch/arm/dts/sunxi-u-boot.dtsi | 12 -
arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 23 +-
arch/arm/include/asm/arch-sunxi/usb_phy.h | 20 -
arch/arm/mach-sunxi/Kconfig | 9 +
arch/arm/mach-sunxi/Makefile | 3 -
arch/arm/mach-sunxi/usb_phy.c | 406 -----------------
board/sunxi/MAINTAINERS | 6 +
board/sunxi/board.c | 40 +-
configs/Sinovoip_BPI_M2_Plus_defconfig | 1 +
configs/amarula_a64_relic_defconfig | 17 +
configs/bananapi_m64_defconfig | 1 +
configs/orangepi_pc2_defconfig | 1 +
configs/orangepi_prime_defconfig | 1 +
doc/device-tree-bindings/phy/sun4i-usb-phy.txt | 65 +++
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/phy/allwinner/Kconfig | 13 +
drivers/phy/allwinner/Makefile | 6 +
drivers/phy/allwinner/phy-sun4i-usb.c | 575 +++++++++++++++++++++++++
drivers/usb/host/ehci-sunxi.c | 66 ++-
drivers/usb/host/ohci-sunxi.c | 72 +++-
drivers/usb/musb-new/musb_core.h | 4 +
drivers/usb/musb-new/musb_regs.h | 3 +-
drivers/usb/musb-new/musb_uboot.c | 22 +-
drivers/usb/musb-new/sunxi.c | 228 ++++++++--
include/phy-sun4i-usb.h | 34 ++
34 files changed, 1280 insertions(+), 580 deletions(-)
create mode 100644 arch/arm/dts/sun50i-a64-amarula-relic.dts
delete mode 100644 arch/arm/include/asm/arch-sunxi/usb_phy.h
delete mode 100644 arch/arm/mach-sunxi/usb_phy.c
create mode 100644 configs/amarula_a64_relic_defconfig
create mode 100644 doc/device-tree-bindings/phy/sun4i-usb-phy.txt
create mode 100644 drivers/phy/allwinner/Kconfig
create mode 100644 drivers/phy/allwinner/Makefile
create mode 100644 drivers/phy/allwinner/phy-sun4i-usb.c
create mode 100644 include/phy-sun4i-usb.h
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-05-09 11:03 Jagan Teki
@ 2018-05-10 11:16 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-05-10 11:16 UTC (permalink / raw)
To: u-boot
On Wed, May 09, 2018 at 04:33:12PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit b25f8e2112b1582ce6386e846800a31bab688e50:
>
> Merge git://git.denx.de/u-boot-imx (2018-04-30 07:14:05 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to f3df7758b5fb4e1f8eb8f2bbd9b9354054884502:
>
> board: sunxi: sun8i-v40: Add Bananapi M2 Berry support (2018-05-07 11:33:19 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180510/27a3ef08/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-05-09 11:03 Jagan Teki
2018-05-10 11:16 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-05-09 11:03 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit b25f8e2112b1582ce6386e846800a31bab688e50:
Merge git://git.denx.de/u-boot-imx (2018-04-30 07:14:05 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to f3df7758b5fb4e1f8eb8f2bbd9b9354054884502:
board: sunxi: sun8i-v40: Add Bananapi M2 Berry support (2018-05-07 11:33:19 +0530)
----------------------------------------------------------------
Chen-Yu Tsai (5):
sunxi: Disable R_I2C for Libre Computer Board ALL-H3-CC H3 ver.
sunxi: Split out common board design for ALL-H3-CC device tree
sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver.
sunxi: Add Libre Computer Board ALL-H3-CC H5 ver.
sunxi: Sort dts Makefile entries for H3
Jagan Teki (2):
ARM: dts: sun8i: Sync r40 dtsi from Linux
board: sunxi: sun8i-v40: Add Bananapi M2 Berry support
arch/arm/dts/Makefile | 15 +-
arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts | 13 ++
arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts | 13 ++
arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts | 166 +-----------------
arch/arm/dts/sun8i-r40.dtsi | 43 +++++
arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | 132 +++++++++++++++
arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi | 168 ++++++++++++++++++
board/sunxi/MAINTAINERS | 9 +-
configs/bananapi_m2_berry_defconfig | 14 ++
configs/libretech_all_h3_cc_h2_plus_defconfig | 15 ++
configs/libretech_all_h3_cc_h3_defconfig | 2 -
configs/libretech_all_h3_cc_h5_defconfig | 15 ++
include/dt-bindings/clock/sun8i-r40-ccu.h | 187 +++++++++++++++++++++
include/dt-bindings/reset/sun8i-r40-ccu.h | 130 ++++++++++++++
14 files changed, 749 insertions(+), 173 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
create mode 100644 arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
create mode 100644 arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
create mode 100644 arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi
create mode 100644 configs/bananapi_m2_berry_defconfig
create mode 100644 configs/libretech_all_h3_cc_h2_plus_defconfig
create mode 100644 configs/libretech_all_h3_cc_h5_defconfig
create mode 100644 include/dt-bindings/clock/sun8i-r40-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-r40-ccu.h
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-04-04 8:55 Jagan Teki
@ 2018-04-05 23:39 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-04-05 23:39 UTC (permalink / raw)
To: u-boot
On Wed, Apr 04, 2018 at 02:25:09PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR, these changes were there since from last release.
>
> thanks,
> Jagan.
>
> The following changes since commit 0354f4bef0f1ff1e160673794577ca00b23f3f1a:
>
> sunxi: Add DRAM_SUN8I_A83T kconfig entry (2018-03-19 16:46:47 +0530)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to f3fed05e095439b3fd24990e20dbea1d4b03c121:
>
> Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT" (2018-04-04 14:15:40 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180405/e9620656/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-04-04 8:55 Jagan Teki
2018-04-05 23:39 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-04-04 8:55 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR, these changes were there since from last release.
thanks,
Jagan.
The following changes since commit 0354f4bef0f1ff1e160673794577ca00b23f3f1a:
sunxi: Add DRAM_SUN8I_A83T kconfig entry (2018-03-19 16:46:47 +0530)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to f3fed05e095439b3fd24990e20dbea1d4b03c121:
Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT" (2018-04-04 14:15:40 +0530)
----------------------------------------------------------------
Andre Przywara (11):
sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted Firmware
sunxi: gpio: add missing compatible strings
net: sun8i-emac: support new pinctrl DT bindings
net: sun8i-emac: add support for new EMAC DT binding
arm: dts: sunxi: update A64 to new EMAC binding
arm: dts: sunxi: update H3 to new EMAC binding
arm: dts: sunxi: update H5 to new EMAC binding
net: sun8i-emac: remove support for old binding
sunxi: disable direct MMC environment
sunxi: revert disabling of features
Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT"
Miquel Raynal (20):
spl: fix binman_sym output check
mtd: nand: sunxi: fix ECC strength choice
spl: nand: sunxi: fix second case of modulo by zero error
spl: nand: sunxi: fix typo on register name
spl: nand: sunxi: introduce the nand_wait_int() helper
spl: nand: sunxi: introduce the nand_wait_cmd_fifo_empty() helper
spl: nand: sunxi: add missing status clear
spl: nand: sunxi: create an helper to handle command execution
spl: nand: sunxi: ensure enough time has passed after changing the column
spl: nand: sunxi: make the reset column helper more generic
sunxi: spl: deassert the NAND controller reset line
spl: nand: sunxi: declare the ecc_bytes array globally
spl: nand: sunxi: use PIO instead of DMA
sunxi: spl: remove DMA related settings of the NAND controller
sunxi: allow NAND support to be compiled for sun8i platforms
sunxi: dts: enable NAND on NES classic
sunxi: automatically select SPL_NAND_SUPPORT in Kconfig
sunxi: make NAND_SUNXI use ARCH_SUNXI as default in Kconfig
sunxi: move the NAND parameters to Kconfig
configs: add NAND support for NES Classic
arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi | 51 +++--
arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 7 +-
arch/arm/dts/sun8i-a23-a33.dtsi | 17 ++
arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts | 6 +-
arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts | 7 +-
arch/arm/dts/sun8i-h3-nanopi-neo.dts | 6 +-
arch/arm/dts/sun8i-h3-orangepi-2.dts | 7 +-
arch/arm/dts/sun8i-h3-orangepi-one.dts | 7 +-
arch/arm/dts/sun8i-h3-orangepi-pc.dts | 7 +-
arch/arm/dts/sun8i-h3-orangepi-plus.dts | 8 +-
arch/arm/dts/sun8i-h3-orangepi-plus2e.dts | 9 +-
arch/arm/dts/sun8i-h3.dtsi | 69 ++++--
.../dts/sun8i-r16-nintendo-nes-classic-edition.dts | 14 ++
arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 6 +
board/sunxi/README.sunxi64 | 6 +
board/sunxi/board.c | 7 +-
cmd/Kconfig | 5 -
common/spl/spl.c | 10 +-
configs/CHIP_pro_defconfig | 6 +-
configs/Nintendo_NES_Classic_Edition_defconfig | 4 +
configs/pine64_plus_defconfig | 1 +
drivers/gpio/sunxi_gpio.c | 3 +
drivers/mtd/nand/Kconfig | 26 ++-
drivers/mtd/nand/sunxi_nand.c | 8 +-
drivers/mtd/nand/sunxi_nand_spl.c | 236 ++++++++++-----------
drivers/net/sun8i_emac.c | 89 +++++---
drivers/video/Kconfig | 2 -
env/Kconfig | 1 -
lib/Kconfig | 1 -
29 files changed, 390 insertions(+), 236 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-03-19 20:00 Jagan Teki
@ 2018-03-20 0:09 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-03-20 0:09 UTC (permalink / raw)
To: u-boot
On Tue, Mar 20, 2018 at 01:30:02AM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit b8aa55cb6414e512cce30bb7db3268eea934466d:
>
> common: move init_helpers.h prototypes in init.h (2018-03-16 14:56:59 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 0354f4bef0f1ff1e160673794577ca00b23f3f1a:
>
> sunxi: Add DRAM_SUN8I_A83T kconfig entry (2018-03-19 16:46:47 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180319/68e0070d/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-03-19 20:00 Jagan Teki
2018-03-20 0:09 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-03-19 20:00 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit b8aa55cb6414e512cce30bb7db3268eea934466d:
common: move init_helpers.h prototypes in init.h (2018-03-16 14:56:59 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 0354f4bef0f1ff1e160673794577ca00b23f3f1a:
sunxi: Add DRAM_SUN8I_A83T kconfig entry (2018-03-19 16:46:47 +0530)
----------------------------------------------------------------
Jagan Teki (11):
sunxi: Add SUN6I_PRCM kconfig entry
sunxi: Add SUN6I_P2WI kconfig entry
sunxi: Use SUN6I_PRCM if used
sunxi: Add SUN8I_RSB kconfig entry
sunxi: Add AXP_PMIC_BUS kconfig entry
sunxi: add DRAM_SUN6I kconfig
sunxi: Add DRAM_SUN4I kconfig entry
sunxi: Add DRAM_SUN9I kconfig entry
sunxi: Add DRAM_SUN8I_A23 kconfig entry
sunxi: Add DRAM_SUN8I_A33 kconfig entry
sunxi: Add DRAM_SUN8I_A83T kconfig entry
arch/arm/mach-sunxi/Kconfig | 81 ++++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-sunxi/Makefile | 30 ++++++----------
drivers/power/Kconfig | 5 +++
3 files changed, 96 insertions(+), 20 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-03-14 14:05 Jagan Teki
@ 2018-03-15 12:26 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-03-15 12:26 UTC (permalink / raw)
To: u-boot
On Wed, Mar 14, 2018 at 07:35:08PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit f95ab1fb6e37f0601f397091bb011edf7a98b890:
>
> Prepare v2018.03 (2018-03-13 08:02:19 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 341c05865478e259c1c9d889c74c43dcd5192cc0:
>
> sunxi: move CONFIG_SYS_TEXT_BASE out of defconfigs (2018-03-14 10:45:37 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180315/01ec007a/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-03-14 14:05 Jagan Teki
2018-03-15 12:26 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-03-14 14:05 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit f95ab1fb6e37f0601f397091bb011edf7a98b890:
Prepare v2018.03 (2018-03-13 08:02:19 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 341c05865478e259c1c9d889c74c43dcd5192cc0:
sunxi: move CONFIG_SYS_TEXT_BASE out of defconfigs (2018-03-14 10:45:37 +0530)
----------------------------------------------------------------
Andre Przywara (2):
sunxi: Pine64: temporarily remove extra Pine64 non-plus DT
sunxi: move CONFIG_SYS_TEXT_BASE out of defconfigs
Chen-Yu Tsai (1):
sunxi: Add reg property for USB OTG node in sun8i-a83t.dtsi
Heinrich Schuchardt (1):
mmc: sunxi: support cd-inverted
Samuel Holland (1):
net: sun8i_emac: Fix PHY initialization
Stefan Mavrodiev (3):
Move CONFIG_PHY_ADDR to Kconfig
sunxi: Add A20-SOM204-EVB board
sunxi: Add A20-SOM204-EVB-eMMC board
Tuomas Tynkkynen (2):
ARM: sunxi: Move u-boot-sunxi-with-spl.bin rule to Makefile
ARM: sunxi: Build u-boot-sunxi-with-spl.bin on ARM64 as well
Kconfig | 3 +
Makefile | 10 +
README | 4 -
arch/arm/cpu/armv7/sunxi/config.mk | 6 -
arch/arm/dts/Makefile | 2 +
arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts | 36 +++
arch/arm/dts/sun7i-a20-olimex-som204-evb.dts | 296 ++++++++++++++++++++++
arch/arm/dts/sun8i-a83t.dtsi | 1 +
board/sunxi/MAINTAINERS | 6 +
board/sunxi/README.sunxi64 | 3 +-
configs/A10-OLinuXino-Lime_defconfig | 1 -
configs/A10s-OLinuXino-M_defconfig | 1 -
configs/A13-OLinuXinoM_defconfig | 1 -
configs/A13-OLinuXino_defconfig | 1 -
configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 -
configs/A20-OLinuXino-Lime2_defconfig | 1 -
configs/A20-OLinuXino-Lime_defconfig | 1 -
configs/A20-OLinuXino_MICRO-eMMC_defconfig | 1 -
configs/A20-OLinuXino_MICRO_defconfig | 1 -
configs/A20-Olimex-SOM-EVB_defconfig | 1 -
configs/A20-Olimex-SOM204-EVB-eMMC_defconfig | 34 +++
configs/A20-Olimex-SOM204-EVB_defconfig | 33 +++
configs/A33-OLinuXino_defconfig | 1 -
configs/Ainol_AW1_defconfig | 1 -
configs/Ampe_A76_defconfig | 1 -
configs/Auxtek-T003_defconfig | 1 -
configs/Auxtek-T004_defconfig | 1 -
configs/Bananapi_M2_Ultra_defconfig | 1 -
configs/Bananapi_defconfig | 1 -
configs/Bananapi_m2m_defconfig | 1 -
configs/Bananapro_defconfig | 1 -
configs/CHIP_defconfig | 1 -
configs/CHIP_pro_defconfig | 1 -
configs/CSQ_CS908_defconfig | 1 -
configs/Chuwi_V7_CW0825_defconfig | 1 -
configs/Colombus_defconfig | 1 -
configs/Cubieboard2_defconfig | 1 -
configs/Cubieboard4_defconfig | 1 -
configs/Cubieboard_defconfig | 1 -
configs/Cubietruck_defconfig | 1 -
configs/Cubietruck_plus_defconfig | 1 -
configs/Empire_electronix_d709_defconfig | 1 -
configs/Empire_electronix_m712_defconfig | 1 -
configs/Hummingbird_A31_defconfig | 1 -
configs/Hyundai_A7HD_defconfig | 1 -
configs/Itead_Ibox_A20_defconfig | 1 -
configs/Lamobo_R1_defconfig | 1 -
configs/LicheePi_Zero_defconfig | 1 -
configs/Linksprite_pcDuino3_Nano_defconfig | 1 -
configs/Linksprite_pcDuino3_defconfig | 1 -
configs/Linksprite_pcDuino_defconfig | 1 -
configs/MK808C_defconfig | 1 -
configs/MSI_Primo73_defconfig | 1 -
configs/MSI_Primo81_defconfig | 1 -
configs/Marsboard_A10_defconfig | 1 -
configs/Mele_A1000G_quad_defconfig | 1 -
configs/Mele_A1000_defconfig | 1 -
configs/Mele_I7_defconfig | 1 -
configs/Mele_M3_defconfig | 1 -
configs/Mele_M5_defconfig | 1 -
configs/Mele_M9_defconfig | 1 -
configs/Merrii_A80_Optimus_defconfig | 1 -
configs/Mini-X_defconfig | 1 -
configs/Nintendo_NES_Classic_Edition_defconfig | 1 -
configs/Orangepi_defconfig | 1 -
configs/Orangepi_mini_defconfig | 1 -
configs/Sinlinx_SinA31s_defconfig | 1 -
configs/Sinlinx_SinA33_defconfig | 1 -
configs/Sinovoip_BPI_M2_Plus_defconfig | 1 -
configs/Sinovoip_BPI_M2_defconfig | 1 -
configs/Sinovoip_BPI_M3_defconfig | 1 -
configs/Sunchip_CX-A99_defconfig | 1 -
configs/UTOO_P66_defconfig | 1 -
configs/Wexler_TAB7200_defconfig | 1 -
configs/Wits_Pro_A20_DKT_defconfig | 1 -
configs/Wobo_i5_defconfig | 1 -
configs/Yones_Toptech_BD1078_defconfig | 1 -
configs/Yones_Toptech_BS1078_V2_defconfig | 1 -
configs/a64-olinuxino_defconfig | 1 -
configs/ba10_tv_box_defconfig | 1 -
configs/bananapi_m1_plus_defconfig | 1 -
configs/bananapi_m64_defconfig | 1 -
configs/colorfly_e708_q1_defconfig | 1 -
configs/devkit3250_defconfig | 1 +
configs/difrnce_dit4350_defconfig | 1 -
configs/dserve_dsrv9703c_defconfig | 1 -
configs/ga10h_v1_1_defconfig | 1 -
configs/gt90h_v4_defconfig | 1 -
configs/h8_homlet_v2_defconfig | 1 -
configs/i12-tvbox_defconfig | 1 -
configs/iNet_3F_defconfig | 1 -
configs/iNet_3W_defconfig | 1 -
configs/iNet_86VS_defconfig | 1 -
configs/iNet_D978_rev2_defconfig | 1 -
configs/icnova-a20-swac_defconfig | 1 -
configs/inet1_defconfig | 1 -
configs/inet86dz_defconfig | 1 -
configs/inet97fv2_defconfig | 1 -
configs/inet98v_rev2_defconfig | 1 -
configs/inet9f_rev03_defconfig | 1 -
configs/inet_q972_defconfig | 1 -
configs/jesurun_q5_defconfig | 1 -
configs/khadas-vim_defconfig | 1 +
configs/libretech-cc_defconfig | 1 +
configs/libretech_all_h3_cc_h3_defconfig | 1 -
configs/mixtile_loftq_defconfig | 1 -
configs/mk802_a10s_defconfig | 1 -
configs/mk802_defconfig | 1 -
configs/mk802ii_defconfig | 1 -
configs/nanopi_a64_defconfig | 1 -
configs/nanopi_m1_defconfig | 1 -
configs/nanopi_m1_plus_defconfig | 1 -
configs/nanopi_neo2_defconfig | 1 -
configs/nanopi_neo_air_defconfig | 1 -
configs/nanopi_neo_defconfig | 1 -
configs/nanopi_neo_plus2_defconfig | 1 -
configs/orangepi_2_defconfig | 1 -
configs/orangepi_lite_defconfig | 1 -
configs/orangepi_one_defconfig | 1 -
configs/orangepi_pc2_defconfig | 1 -
configs/orangepi_pc_defconfig | 1 -
configs/orangepi_pc_plus_defconfig | 1 -
configs/orangepi_plus2e_defconfig | 1 -
configs/orangepi_plus_defconfig | 1 -
configs/orangepi_prime_defconfig | 1 -
configs/orangepi_win_defconfig | 1 -
configs/orangepi_zero_defconfig | 1 -
configs/orangepi_zero_plus2_defconfig | 1 -
configs/p212_defconfig | 1 +
configs/parrot_r16_defconfig | 1 -
configs/pine64_plus_defconfig | 2 -
configs/polaroid_mid2407pxe03_defconfig | 1 -
configs/polaroid_mid2809pxe04_defconfig | 1 -
configs/pov_protab2_ips9_defconfig | 1 -
configs/q8_a13_tablet_defconfig | 1 -
configs/q8_a23_tablet_800x480_defconfig | 1 -
configs/q8_a33_tablet_1024x600_defconfig | 1 -
configs/q8_a33_tablet_800x480_defconfig | 1 -
configs/r7-tv-dongle_defconfig | 1 -
configs/sopine_baseboard_defconfig | 1 -
configs/sun8i_a23_evb_defconfig | 1 -
configs/sunxi_Gemei_G9_defconfig | 1 -
configs/tbs_a711_defconfig | 1 -
drivers/mmc/sunxi_mmc.c | 10 +-
drivers/net/phy/Kconfig | 7 +
drivers/net/sun8i_emac.c | 2 +-
include/configs/am335x_shc.h | 1 -
include/configs/baltos.h | 1 -
include/configs/devkit3250.h | 1 -
include/configs/ds414.h | 1 -
include/configs/edb93xx.h | 1 -
include/configs/khadas-vim.h | 2 -
include/configs/libretech-cc.h | 2 -
include/configs/p212.h | 2 -
include/configs/pepper.h | 1 -
include/configs/sunxi-common.h | 2 -
include/configs/work_92105.h | 1 -
include/configs/x600.h | 1 -
scripts/config_whitelist.txt | 1 -
159 files changed, 442 insertions(+), 160 deletions(-)
delete mode 100644 arch/arm/cpu/armv7/sunxi/config.mk
create mode 100644 arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts
create mode 100644 arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
create mode 100644 configs/A20-Olimex-SOM204-EVB-eMMC_defconfig
create mode 100644 configs/A20-Olimex-SOM204-EVB_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-01-26 14:35 Jagan Teki
@ 2018-01-26 21:00 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-01-26 21:00 UTC (permalink / raw)
To: u-boot
On Fri, Jan 26, 2018 at 08:05:41PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit 557767ed29968af0294e3aae48433e5d5a298e0b:
>
> Merge git://git.denx.de/u-boot-marvell (2018-01-20 08:39:47 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to a6968ecb0ad6b06552c97005eba265a4c5761626:
>
> gpio: sunxi: Add compatible string for H5 PIO (2018-01-26 20:02:33 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180126/54070c27/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-01-26 14:35 Jagan Teki
2018-01-26 21:00 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-01-26 14:35 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks!
Jagan.
The following changes since commit 557767ed29968af0294e3aae48433e5d5a298e0b:
Merge git://git.denx.de/u-boot-marvell (2018-01-20 08:39:47 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to a6968ecb0ad6b06552c97005eba265a4c5761626:
gpio: sunxi: Add compatible string for H5 PIO (2018-01-26 20:02:33 +0530)
----------------------------------------------------------------
Andre Heider (1):
sunxi: imply CONFIG_OF_LIBFDT_OVERLAY
Chris Blake (1):
gpio: sunxi: Add compatible string for H5 PIO
Giulio Benetti (1):
sunxi: Fix display timing flags
Maxime Ripard (11):
dfu: select HASH
cmd: crc32: Disable by default on sunXi
cmd: unzip: Disable by default on sunXi
cmd: loadb: Disable by default on sunXi
cmd: loads: Disable by default on sunXi
cmd: misc: Disable by default on sunXi
video: bpp8: Disable by default on sunXi
video: bpp16: Disable by default on sunXi
net: regex: Disable by default on sunXi
Makefile: Add size check to the u-boot.itb make target
sunxi: Add limit with the MMC environment
Makefile | 1 +
arch/arm/Kconfig | 1 +
cmd/Kconfig | 5 +++++
configs/CHIP_defconfig | 1 -
configs/CHIP_pro_defconfig | 1 -
drivers/dfu/Kconfig | 1 +
drivers/gpio/sunxi_gpio.c | 1 +
drivers/video/Kconfig | 2 ++
drivers/video/sunxi/sunxi_display.c | 2 ++
include/configs/sunxi-common.h | 10 ++++++++++
lib/Kconfig | 1 +
11 files changed, 24 insertions(+), 2 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2018-01-11 19:02 Jagan Teki
@ 2018-01-12 12:18 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2018-01-12 12:18 UTC (permalink / raw)
To: u-boot
On Fri, Jan 12, 2018 at 12:32:03AM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR, thanks!
>
> The following changes since commit 98691a60abffb44303d7dae6e9e699d0daded930:
>
> Merge git://git.denx.de/u-boot-rockchip (2018-01-09 13:28:51 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 00425e63f6a0eef03a2c554edc3caee5a27a046b:
>
> configs: sun50i: Enable eMMC on a64-olinuxino (2018-01-12 00:28:29 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180112/a44edecb/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2018-01-11 19:02 Jagan Teki
2018-01-12 12:18 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2018-01-11 19:02 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR, thanks!
The following changes since commit 98691a60abffb44303d7dae6e9e699d0daded930:
Merge git://git.denx.de/u-boot-rockchip (2018-01-09 13:28:51 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 00425e63f6a0eef03a2c554edc3caee5a27a046b:
configs: sun50i: Enable eMMC on a64-olinuxino (2018-01-12 00:28:29 +0530)
----------------------------------------------------------------
Chen-Yu Tsai (1):
sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver.
Jagan Teki (1):
configs: sun50i: Enable eMMC on a64-olinuxino
Maxime Ripard (1):
sunxi: maintainers: Add myself for the TBS A711
Tuomas Tynkkynen (1):
ARM: sunxi: Remove left-over cd-inverted property from pcDuino3
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun7i-a20-pcduino3.dts | 1 -
arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts | 180 ++++++++++++++++++++++++++
board/sunxi/MAINTAINERS | 10 ++
configs/a64-olinuxino_defconfig | 1 +
configs/libretech_all_h3_cc_h3_defconfig | 19 +++
6 files changed, 211 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts
create mode 100644 configs/libretech_all_h3_cc_h3_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-12-19 11:47 Jagan Teki
@ 2017-12-19 20:44 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-12-19 20:44 UTC (permalink / raw)
To: u-boot
On Tue, Dec 19, 2017 at 05:17:21PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit b6251db8c3f0de605b4cd6f15a00fc7dd19cda63:
>
> Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND (2017-11-17 16:37:26 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 23cd00ab2d8c39eaa15257efcba441939ea66fa8:
>
> arm64: dts: sun50i: h5: Order nodes in alphabetic for orangepi-prime (2017-12-19 16:26:21 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171219/a8cfa410/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-12-19 11:47 Jagan Teki
2017-12-19 20:44 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2017-12-19 11:47 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks!
Jagan.
The following changes since commit b6251db8c3f0de605b4cd6f15a00fc7dd19cda63:
Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND (2017-11-17 16:37:26 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 23cd00ab2d8c39eaa15257efcba441939ea66fa8:
arm64: dts: sun50i: h5: Order nodes in alphabetic for orangepi-prime (2017-12-19 16:26:21 +0530)
----------------------------------------------------------------
Antony Antony (2):
arm64: sun50i-h5.dtsi : update to kernel 4.14
sun50i: h5: Add NanoPi Neo Plus2 DT initial support
Chen-Yu Tsai (1):
sunxi: Fix UART console index for A33-OLinuXino
Icenowy Zheng (2):
video: sunxi: de2: add support for LCD SimpleFB
sunxi: set the default CPUx frequency of H5 to 816MHz
Jagan Teki (3):
sunxi: arm64: Increase CONFIG_SYS_BOOTM_LEN to 32MB
configs: sunxi: Drop FASTBOOT_FLASH
arm64: dts: sun50i: h5: Order nodes in alphabetic for orangepi-prime
Maxime Ripard (5):
part: efi: Add a Kconfig option for the number of partition entries
part: efi: Add default number of partition entries for sunxi
sunxi: Add default partition scheme
fastboot: Enable flashing by default on sunxi
sunxi: Add the TBS A711 tablet
Stefan Mavrodiev (1):
sunxi: Fix A20-OLinuXino-MICRO LAN8710 support
Vasily Khoruzhick (1):
sunxi: video: HDMI: split VSYNC and HSYNC polarity settings
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts | 106 +++++++++++++++++++++++++
arch/arm/dts/sun50i-h5-orangepi-prime.dts | 16 ++--
arch/arm/dts/sun50i-h5.dtsi | 32 ++++++++
arch/arm/dts/sun8i-a83t-tbs-a711.dts | 76 ++++++++++++++++++
arch/arm/mach-sunxi/Kconfig | 2 +-
board/sunxi/MAINTAINERS | 5 ++
board/sunxi/gmac.c | 4 +
cmd/fastboot/Kconfig | 1 +
configs/A13-OLinuXino_defconfig | 1 -
configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 -
configs/A20-OLinuXino-Lime2_defconfig | 1 -
configs/A20-OLinuXino_MICRO-eMMC_defconfig | 1 +
configs/A20-OLinuXino_MICRO_defconfig | 1 +
configs/A33-OLinuXino_defconfig | 1 +
configs/CHIP_defconfig | 1 -
configs/CHIP_pro_defconfig | 1 -
configs/Cubietruck_defconfig | 1 -
configs/Nintendo_NES_Classic_Edition_defconfig | 1 -
configs/Sinlinx_SinA33_defconfig | 1 -
configs/nanopi_neo_plus2_defconfig | 18 +++++
configs/parrot_r16_defconfig | 1 -
configs/tbs_a711_defconfig | 23 ++++++
disk/Kconfig | 14 ++++
drivers/net/Kconfig | 8 ++
drivers/video/sunxi/sunxi_de2.c | 11 ++-
drivers/video/sunxi/sunxi_dw_hdmi.c | 14 ++--
include/configs/sunxi-common.h | 18 +++++
include/part_efi.h | 2 +-
29 files changed, 336 insertions(+), 30 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
create mode 100644 arch/arm/dts/sun8i-a83t-tbs-a711.dts
create mode 100644 configs/nanopi_neo_plus2_defconfig
create mode 100644 configs/tbs_a711_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-11-10 14:07 Jagan Teki
@ 2017-11-10 15:28 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-11-10 15:28 UTC (permalink / raw)
To: u-boot
On Fri, Nov 10, 2017 at 07:37:21PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Few more fixes for v2017.11, Please pull the same.
>
> thanks!
> Jagan.
>
> The following changes since commit 60567a320f4a55f05ae94fbb34f7aac0dd4c8fea:
>
> Merge git://git.denx.de/u-boot-rockchip (2017-11-10 08:19:01 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 8e2c2d413c37b7fd13641730b706774c08982f0f:
>
> sunxi: SATA link timeout fix (2017-11-10 19:21:24 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171110/200c8a9b/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-11-10 14:07 Jagan Teki
2017-11-10 15:28 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2017-11-10 14:07 UTC (permalink / raw)
To: u-boot
Hi Tom,
Few more fixes for v2017.11, Please pull the same.
thanks!
Jagan.
The following changes since commit 60567a320f4a55f05ae94fbb34f7aac0dd4c8fea:
Merge git://git.denx.de/u-boot-rockchip (2017-11-10 08:19:01 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 8e2c2d413c37b7fd13641730b706774c08982f0f:
sunxi: SATA link timeout fix (2017-11-10 19:21:24 +0530)
----------------------------------------------------------------
Chen-Yu Tsai (1):
net: sun8i_emac: Fix build for non-H3/H5 SoCs
Werner Böllmann (1):
sunxi: SATA link timeout fix
board/sunxi/board.c | 2 ++
drivers/net/sun8i_emac.c | 3 +++
2 files changed, 5 insertions(+)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-11-09 11:45 Jagan Teki
@ 2017-11-10 3:20 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-11-10 3:20 UTC (permalink / raw)
To: u-boot
On Thu, Nov 09, 2017 at 05:15:53PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Few fixes for v2017.11, Please pull the same.
>
> thanks!
> Jagan.
>
> The following changes since commit 43ede0bca7fc1590b623832b743213b818257a27:
>
> Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT (2017-11-05 11:21:35 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 6270a3f035d0bdb5d2283dff4bb568d36ab4c0e3:
>
> sunxi: restore PHYLIB for CONFIG_SUN4I_EMAC users (2017-11-09 14:39:30 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171109/253a7552/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-11-09 11:45 Jagan Teki
2017-11-10 3:20 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2017-11-09 11:45 UTC (permalink / raw)
To: u-boot
Hi Tom,
Few fixes for v2017.11, Please pull the same.
thanks!
Jagan.
The following changes since commit 43ede0bca7fc1590b623832b743213b818257a27:
Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT (2017-11-05 11:21:35 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 6270a3f035d0bdb5d2283dff4bb568d36ab4c0e3:
sunxi: restore PHYLIB for CONFIG_SUN4I_EMAC users (2017-11-09 14:39:30 +0530)
----------------------------------------------------------------
Artturi Alm (2):
sunxi: fix CONFIG_SUNXI_EMAC references
sunxi: restore PHYLIB for CONFIG_SUN4I_EMAC users
Icenowy Zheng (1):
video: sunxi: de2: fix SimpleFB node creation when HDMI not initialized
drivers/net/Kconfig | 1 +
drivers/net/Makefile | 2 +-
drivers/video/sunxi/sunxi_de2.c | 16 +++++++++++-----
include/configs/sunxi-common.h | 2 +-
4 files changed, 14 insertions(+), 7 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-09-01 17:10 Jagan Teki
@ 2017-09-01 18:02 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-09-01 18:02 UTC (permalink / raw)
To: u-boot
On Fri, Sep 01, 2017 at 10:40:59PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull these fixes.
>
> thanks!
> Jagan.
>
> The following changes since commit ead3697d7ec491c055fe546b3a45bcfba45fa022:
>
> mmc: sunxi: fix legacy MMC initialisation (2017-08-28 22:38:05 +0530)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 6ff005cf19363382fc867d7876a75fd8a386e894:
>
> sunxi: Fix CONFIG_SUNXI_GMAC references (2017-09-01 20:48:27 +0530)
>
I ran test/py/test.py on my A20-OLinuXino-Lime2 (that was working with eth
already) and applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170901/5948fde7/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-09-01 17:10 Jagan Teki
2017-09-01 18:02 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2017-09-01 17:10 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull these fixes.
thanks!
Jagan.
The following changes since commit ead3697d7ec491c055fe546b3a45bcfba45fa022:
mmc: sunxi: fix legacy MMC initialisation (2017-08-28 22:38:05 +0530)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 6ff005cf19363382fc867d7876a75fd8a386e894:
sunxi: Fix CONFIG_SUNXI_GMAC references (2017-09-01 20:48:27 +0530)
----------------------------------------------------------------
Chen-Yu Tsai (1):
mmc: sunxi: Only update timing mode bit when enabling new timing mode
Dave Prue (1):
sunxi: Fix CONFIG_SUNXI_GMAC references
arch/arm/include/asm/arch-sunxi/sys_proto.h | 2 +-
board/sunxi/Makefile | 2 +-
drivers/mmc/sunxi_mmc.c | 2 +-
include/configs/sunxi-common.h | 2 +-
scripts/build-whitelist.sh | 4 ++--
scripts/config_whitelist.txt | 1 -
6 files changed, 6 insertions(+), 7 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-09-01 16:42 ` Tom Rini
@ 2017-09-01 16:48 ` Jagan Teki
0 siblings, 0 replies; 125+ messages in thread
From: Jagan Teki @ 2017-09-01 16:48 UTC (permalink / raw)
To: u-boot
On Fri, Sep 1, 2017 at 10:12 PM, Tom Rini <trini@konsulko.com> wrote:
> On Tue, Aug 29, 2017 at 12:57:43PM +0530, Jagan Teki wrote:
>
>> Hi Tom,
>>
>> These fixes need to be in for the release, please pull the same.
>>
>> thanks!
>> Jagan.
>>
>> The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac573409:
>>
>> mtdparts: Fix uninitialized scalar usage (2017-08-26 16:59:24 -0400)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-sunxi.git master
>>
>> for you to fetch changes up to ead3697d7ec491c055fe546b3a45bcfba45fa022:
>>
>> mmc: sunxi: fix legacy MMC initialisation (2017-08-28 22:38:05 +0530)
>>
>
> Applied to u-boot/master, thanks!
>
> But! Can you please grab https://patchwork.ozlabs.org/patch/793903/ and
> update the commit message as Andreas describes? I think the whitelist
> part is "ok" until we migrate the symbols, which should of course be
> done sooner rather than later. Thanks again!
Yeah, Fixed and send v2 for this[1] will send the PR.
[1] https://patchwork.ozlabs.org/patch/808719/
thanks!
--
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-08-29 7:27 Jagan Teki
@ 2017-09-01 16:42 ` Tom Rini
2017-09-01 16:48 ` Jagan Teki
0 siblings, 1 reply; 125+ messages in thread
From: Tom Rini @ 2017-09-01 16:42 UTC (permalink / raw)
To: u-boot
On Tue, Aug 29, 2017 at 12:57:43PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> These fixes need to be in for the release, please pull the same.
>
> thanks!
> Jagan.
>
> The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac573409:
>
> mtdparts: Fix uninitialized scalar usage (2017-08-26 16:59:24 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to ead3697d7ec491c055fe546b3a45bcfba45fa022:
>
> mmc: sunxi: fix legacy MMC initialisation (2017-08-28 22:38:05 +0530)
>
Applied to u-boot/master, thanks!
But! Can you please grab https://patchwork.ozlabs.org/patch/793903/ and
update the commit message as Andreas describes? I think the whitelist
part is "ok" until we migrate the symbols, which should of course be
done sooner rather than later. Thanks again!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170901/3e82b92c/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-08-29 7:27 Jagan Teki
2017-09-01 16:42 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2017-08-29 7:27 UTC (permalink / raw)
To: u-boot
Hi Tom,
These fixes need to be in for the release, please pull the same.
thanks!
Jagan.
The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac573409:
mtdparts: Fix uninitialized scalar usage (2017-08-26 16:59:24 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to ead3697d7ec491c055fe546b3a45bcfba45fa022:
mmc: sunxi: fix legacy MMC initialisation (2017-08-28 22:38:05 +0530)
----------------------------------------------------------------
Jagan Teki (1):
sunxi: bpi-m3: Enable eMMC
Maxime Ripard (3):
mmc: sunxi: Support new mode
sunxi: Enable MMC new mode for A83T
mmc: sunxi: fix legacy MMC initialisation
arch/arm/include/asm/arch-sunxi/clock_sun8i_a83t.h | 1 +
arch/arm/include/asm/arch-sunxi/mmc.h | 11 +++++---
arch/arm/mach-sunxi/Kconfig | 1 +
configs/Sinovoip_BPI_M3_defconfig | 1 +
drivers/mmc/Kconfig | 4 +++
drivers/mmc/sunxi_mmc.c | 29 +++++++++++++++++++---
6 files changed, 40 insertions(+), 7 deletions(-)
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-08-16 13:11 Jagan Teki
@ 2017-08-17 1:17 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-08-17 1:17 UTC (permalink / raw)
To: u-boot
On Wed, Aug 16, 2017 at 06:41:09PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit b24065c4ef21687787a74eef22dfa9232096f965:
>
> Merge git://git.denx.de/u-boot-i2c (2017-08-10 07:22:59 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 585bf8ae6f467d85b8e9f17141c8562d96a83c51:
>
> sun50i: a64: Add A64-OLinuXino initial support (2017-08-15 11:30:59 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170816/8c592c76/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-08-16 13:11 Jagan Teki
2017-08-17 1:17 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2017-08-16 13:11 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks!
Jagan.
The following changes since commit b24065c4ef21687787a74eef22dfa9232096f965:
Merge git://git.denx.de/u-boot-i2c (2017-08-10 07:22:59 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 585bf8ae6f467d85b8e9f17141c8562d96a83c51:
sun50i: a64: Add A64-OLinuXino initial support (2017-08-15 11:30:59 +0530)
----------------------------------------------------------------
Clément Bœsch (1):
sunxi: reduce Orange Pi Zero DRAM clock speed
Emmanuel Vadot (1):
ARM: dts: sunxi: Change node name for pwrseq pin on Olinuxino-lime2-emmc
Icenowy Zheng (3):
sunxi: add PRCM secure switch register definition
sunxi: switch PRCM to non-secure on H3/H5 SoCs
sunxi: add MACPWR in Orange Pi PC2 defconfig
Jagan Teki (3):
sun50i: a64: Sync Linux [oe]hci0 nodes
sun50i: a64: Add initial NanoPi A64 support
sun50i: a64: Add A64-OLinuXino initial support
Olliver Schinagl (1):
sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMC
arch/arm/dts/Makefile | 2 +
arch/arm/dts/sun50i-a64-nanopi-a64.dts | 115 ++++++++++++++++++++++++
arch/arm/dts/sun50i-a64-olinuxino.dts | 84 +++++++++++++++++
arch/arm/dts/sun50i-a64.dtsi | 22 +++++
arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts | 2 +-
arch/arm/include/asm/arch-sunxi/prcm.h | 6 ++
arch/arm/mach-sunxi/clock_sun6i.c | 6 ++
board/sunxi/MAINTAINERS | 15 ++++
configs/A20-OLinuXino-Lime2-eMMC_defconfig | 36 ++++++++
configs/a64-olinuxino_defconfig | 15 ++++
configs/nanopi_a64_defconfig | 15 ++++
configs/orangepi_pc2_defconfig | 1 +
configs/orangepi_zero_defconfig | 2 +-
13 files changed, 319 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/dts/sun50i-a64-nanopi-a64.dts
create mode 100644 arch/arm/dts/sun50i-a64-olinuxino.dts
create mode 100644 configs/A20-OLinuXino-Lime2-eMMC_defconfig
create mode 100644 configs/a64-olinuxino_defconfig
create mode 100644 configs/nanopi_a64_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-06-16 16:24 Jagan Teki
2017-06-16 17:13 ` Siarhei Siamashka
2017-06-20 2:53 ` Jagan Teki
@ 2017-06-20 2:54 ` Tom Rini
2 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-06-20 2:54 UTC (permalink / raw)
To: u-boot
On Fri, Jun 16, 2017 at 09:54:47PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit 24796d27be0d0f403ed6ad7e3022b33e36ac08b5:
>
> Merge git://git.denx.de/u-boot-ubi (2017-06-06 07:13:39 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 2b1a33213e810f43f9d7e33b9d8db99e1b80a1c0:
>
> sun50i: h5: Add initial NanoPi NEO2 support (2017-06-14 20:25:56 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170619/18ae0fea/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-06-16 16:24 Jagan Teki
2017-06-16 17:13 ` Siarhei Siamashka
@ 2017-06-20 2:53 ` Jagan Teki
2017-06-20 2:54 ` Tom Rini
2 siblings, 0 replies; 125+ messages in thread
From: Jagan Teki @ 2017-06-20 2:53 UTC (permalink / raw)
To: u-boot
On Fri, Jun 16, 2017 at 9:54 PM, Jagan Teki <jagannadh.teki@gmail.com> wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit 24796d27be0d0f403ed6ad7e3022b33e36ac08b5:
>
> Merge git://git.denx.de/u-boot-ubi (2017-06-06 07:13:39 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 2b1a33213e810f43f9d7e33b9d8db99e1b80a1c0:
>
> sun50i: h5: Add initial NanoPi NEO2 support (2017-06-14 20:25:56 +0530)
>
> ----------------------------------------------------------------
> Chen-Yu Tsai (1):
> sunxi: psci: Move entry address setting to separate function
>
> Icenowy Zheng (12):
> sunxi: makes an invisible option for H3-like DRAM controllers
> sunxi: Rename bus-width related macros in H3 DRAM code
> sunxi: add option for 16-bit DW DRAM controller
> sunxi: add bank detection code to H3 DRAM initialization code
> sunxi: Add selective DRAM type and timing
> sunxi: enable dual rank detection in DesignWare-like DRAM code
> sunxi: add support for the DDR2 in V3s SoC
> sunxi: add support for V3s DRAM controller
> sunxi: enable DRAM initialization and SPL for V3s SoC
> sunxi: add LPDDR3 DRAM type support for DesignWare-like DRAM controller
> sunxi: add LPDDR3 timing from stock boot0
> sunxi: add a defconfig for SoPine w/ official baseboard
>
> Jagan Teki (4):
> sun8i: h3: Add initial NanoPi M1 Plus support
> sun50i: h5: Add initial Orangepi Zero Plus 2 support
> sun50i: a64: Add initial Orangepi Win/WinPlus support
> sun50i: h5: Add initial NanoPi NEO2 support
Ping!
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-06-16 17:13 ` Siarhei Siamashka
@ 2017-06-16 19:11 ` Jagan Teki
0 siblings, 0 replies; 125+ messages in thread
From: Jagan Teki @ 2017-06-16 19:11 UTC (permalink / raw)
To: u-boot
On Fri, Jun 16, 2017 at 10:43 PM, Siarhei Siamashka
<siarhei.siamashka@gmail.com> wrote:
> On Fri, 16 Jun 2017 21:54:47 +0530
> Jagan Teki <jagannadh.teki@gmail.com> wrote:
>
>> Hi Tom,
>>
>> Please pull this PR.
>>
>> thanks!
>> Jagan.
>>
>> The following changes since commit 24796d27be0d0f403ed6ad7e3022b33e36ac08b5:
>>
>> Merge git://git.denx.de/u-boot-ubi (2017-06-06 07:13:39 -0400)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-sunxi.git master
>>
>> for you to fetch changes up to 2b1a33213e810f43f9d7e33b9d8db99e1b80a1c0:
>>
>> sun50i: h5: Add initial NanoPi NEO2 support (2017-06-14 20:25:56 +0530)
>>
>> ----------------------------------------------------------------
>> Chen-Yu Tsai (1):
>> sunxi: psci: Move entry address setting to separate function
>>
>> Icenowy Zheng (12):
>> sunxi: makes an invisible option for H3-like DRAM controllers
>> sunxi: Rename bus-width related macros in H3 DRAM code
>> sunxi: add option for 16-bit DW DRAM controller
>> sunxi: add bank detection code to H3 DRAM initialization code
>> sunxi: Add selective DRAM type and timing
>> sunxi: enable dual rank detection in DesignWare-like DRAM code
>> sunxi: add support for the DDR2 in V3s SoC
>> sunxi: add support for V3s DRAM controller
>> sunxi: enable DRAM initialization and SPL for V3s SoC
>> sunxi: add LPDDR3 DRAM type support for DesignWare-like DRAM controller
>> sunxi: add LPDDR3 timing from stock boot0
>> sunxi: add a defconfig for SoPine w/ official baseboard
>
> Isn't this rather invasive change (a) still under review
> and (b) scheduled for the next merge window either way?
NO, Initial patches were send during MW we waited there too and
applied on -sunxi/master weeks ago. Better please send any patches if
you find any issues.
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-06-16 16:24 Jagan Teki
@ 2017-06-16 17:13 ` Siarhei Siamashka
2017-06-16 19:11 ` Jagan Teki
2017-06-20 2:53 ` Jagan Teki
2017-06-20 2:54 ` Tom Rini
2 siblings, 1 reply; 125+ messages in thread
From: Siarhei Siamashka @ 2017-06-16 17:13 UTC (permalink / raw)
To: u-boot
On Fri, 16 Jun 2017 21:54:47 +0530
Jagan Teki <jagannadh.teki@gmail.com> wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit 24796d27be0d0f403ed6ad7e3022b33e36ac08b5:
>
> Merge git://git.denx.de/u-boot-ubi (2017-06-06 07:13:39 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 2b1a33213e810f43f9d7e33b9d8db99e1b80a1c0:
>
> sun50i: h5: Add initial NanoPi NEO2 support (2017-06-14 20:25:56 +0530)
>
> ----------------------------------------------------------------
> Chen-Yu Tsai (1):
> sunxi: psci: Move entry address setting to separate function
>
> Icenowy Zheng (12):
> sunxi: makes an invisible option for H3-like DRAM controllers
> sunxi: Rename bus-width related macros in H3 DRAM code
> sunxi: add option for 16-bit DW DRAM controller
> sunxi: add bank detection code to H3 DRAM initialization code
> sunxi: Add selective DRAM type and timing
> sunxi: enable dual rank detection in DesignWare-like DRAM code
> sunxi: add support for the DDR2 in V3s SoC
> sunxi: add support for V3s DRAM controller
> sunxi: enable DRAM initialization and SPL for V3s SoC
> sunxi: add LPDDR3 DRAM type support for DesignWare-like DRAM controller
> sunxi: add LPDDR3 timing from stock boot0
> sunxi: add a defconfig for SoPine w/ official baseboard
Isn't this rather invasive change (a) still under review
and (b) scheduled for the next merge window either way?
Tom, please don't merge this pull request until we clarify its status.
>
> Jagan Teki (4):
> sun8i: h3: Add initial NanoPi M1 Plus support
> sun50i: h5: Add initial Orangepi Zero Plus 2 support
> sun50i: a64: Add initial Orangepi Win/WinPlus support
> sun50i: h5: Add initial NanoPi NEO2 support
>
> arch/arm/cpu/armv7/sunxi/psci.c | 25 ++-
> arch/arm/dts/Makefile | 6 +-
> arch/arm/dts/sun50i-a64-orangepi-win.dts | 94 +++++++++++
> arch/arm/dts/sun50i-h5-nanopi-neo2.dts | 86 ++++++++++
> arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts | 97 +++++++++++
> arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts | 64 +++++++
> arch/arm/include/asm/arch-sunxi/dram.h | 6 +-
> .../{dram_sun8i_h3.h => dram_sunxi_dw.h} | 36 +++-
> arch/arm/mach-sunxi/Kconfig | 75 ++++++++-
> arch/arm/mach-sunxi/Makefile | 5 +-
> .../{dram_sun8i_h3.c => dram_sunxi_dw.c} | 187 +++++++--------------
> arch/arm/mach-sunxi/dram_timings/Makefile | 3 +
> arch/arm/mach-sunxi/dram_timings/ddr2_v3s.c | 84 +++++++++
> arch/arm/mach-sunxi/dram_timings/ddr3_1333.c | 87 ++++++++++
> arch/arm/mach-sunxi/dram_timings/lpddr3_stock.c | 83 +++++++++
> board/sunxi/MAINTAINERS | 25 +++
> configs/nanopi_m1_plus_defconfig | 18 ++
> configs/nanopi_neo2_defconfig | 16 ++
> configs/orangepi_win_defconfig | 16 ++
> configs/orangepi_zero_plus2_defconfig | 18 ++
> configs/sopine_baseboard_defconfig | 22 +++
> 21 files changed, 910 insertions(+), 143 deletions(-)
> create mode 100644 arch/arm/dts/sun50i-a64-orangepi-win.dts
> create mode 100644 arch/arm/dts/sun50i-h5-nanopi-neo2.dts
> create mode 100644 arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
> create mode 100644 arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
> rename arch/arm/include/asm/arch-sunxi/{dram_sun8i_h3.h => dram_sunxi_dw.h} (86%)
> rename arch/arm/mach-sunxi/{dram_sun8i_h3.c => dram_sunxi_dw.c} (84%)
> create mode 100644 arch/arm/mach-sunxi/dram_timings/Makefile
> create mode 100644 arch/arm/mach-sunxi/dram_timings/ddr2_v3s.c
> create mode 100644 arch/arm/mach-sunxi/dram_timings/ddr3_1333.c
> create mode 100644 arch/arm/mach-sunxi/dram_timings/lpddr3_stock.c
> create mode 100644 configs/nanopi_m1_plus_defconfig
> create mode 100644 configs/nanopi_neo2_defconfig
> create mode 100644 configs/orangepi_win_defconfig
> create mode 100644 configs/orangepi_zero_plus2_defconfig
> create mode 100644 configs/sopine_baseboard_defconfig
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
--
Best regards,
Siarhei Siamashka
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-06-16 16:24 Jagan Teki
2017-06-16 17:13 ` Siarhei Siamashka
` (2 more replies)
0 siblings, 3 replies; 125+ messages in thread
From: Jagan Teki @ 2017-06-16 16:24 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks!
Jagan.
The following changes since commit 24796d27be0d0f403ed6ad7e3022b33e36ac08b5:
Merge git://git.denx.de/u-boot-ubi (2017-06-06 07:13:39 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 2b1a33213e810f43f9d7e33b9d8db99e1b80a1c0:
sun50i: h5: Add initial NanoPi NEO2 support (2017-06-14 20:25:56 +0530)
----------------------------------------------------------------
Chen-Yu Tsai (1):
sunxi: psci: Move entry address setting to separate function
Icenowy Zheng (12):
sunxi: makes an invisible option for H3-like DRAM controllers
sunxi: Rename bus-width related macros in H3 DRAM code
sunxi: add option for 16-bit DW DRAM controller
sunxi: add bank detection code to H3 DRAM initialization code
sunxi: Add selective DRAM type and timing
sunxi: enable dual rank detection in DesignWare-like DRAM code
sunxi: add support for the DDR2 in V3s SoC
sunxi: add support for V3s DRAM controller
sunxi: enable DRAM initialization and SPL for V3s SoC
sunxi: add LPDDR3 DRAM type support for DesignWare-like DRAM controller
sunxi: add LPDDR3 timing from stock boot0
sunxi: add a defconfig for SoPine w/ official baseboard
Jagan Teki (4):
sun8i: h3: Add initial NanoPi M1 Plus support
sun50i: h5: Add initial Orangepi Zero Plus 2 support
sun50i: a64: Add initial Orangepi Win/WinPlus support
sun50i: h5: Add initial NanoPi NEO2 support
arch/arm/cpu/armv7/sunxi/psci.c | 25 ++-
arch/arm/dts/Makefile | 6 +-
arch/arm/dts/sun50i-a64-orangepi-win.dts | 94 +++++++++++
arch/arm/dts/sun50i-h5-nanopi-neo2.dts | 86 ++++++++++
arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts | 97 +++++++++++
arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts | 64 +++++++
arch/arm/include/asm/arch-sunxi/dram.h | 6 +-
.../{dram_sun8i_h3.h => dram_sunxi_dw.h} | 36 +++-
arch/arm/mach-sunxi/Kconfig | 75 ++++++++-
arch/arm/mach-sunxi/Makefile | 5 +-
.../{dram_sun8i_h3.c => dram_sunxi_dw.c} | 187 +++++++--------------
arch/arm/mach-sunxi/dram_timings/Makefile | 3 +
arch/arm/mach-sunxi/dram_timings/ddr2_v3s.c | 84 +++++++++
arch/arm/mach-sunxi/dram_timings/ddr3_1333.c | 87 ++++++++++
arch/arm/mach-sunxi/dram_timings/lpddr3_stock.c | 83 +++++++++
board/sunxi/MAINTAINERS | 25 +++
configs/nanopi_m1_plus_defconfig | 18 ++
configs/nanopi_neo2_defconfig | 16 ++
configs/orangepi_win_defconfig | 16 ++
configs/orangepi_zero_plus2_defconfig | 18 ++
configs/sopine_baseboard_defconfig | 22 +++
21 files changed, 910 insertions(+), 143 deletions(-)
create mode 100644 arch/arm/dts/sun50i-a64-orangepi-win.dts
create mode 100644 arch/arm/dts/sun50i-h5-nanopi-neo2.dts
create mode 100644 arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
create mode 100644 arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
rename arch/arm/include/asm/arch-sunxi/{dram_sun8i_h3.h => dram_sunxi_dw.h} (86%)
rename arch/arm/mach-sunxi/{dram_sun8i_h3.c => dram_sunxi_dw.c} (84%)
create mode 100644 arch/arm/mach-sunxi/dram_timings/Makefile
create mode 100644 arch/arm/mach-sunxi/dram_timings/ddr2_v3s.c
create mode 100644 arch/arm/mach-sunxi/dram_timings/ddr3_1333.c
create mode 100644 arch/arm/mach-sunxi/dram_timings/lpddr3_stock.c
create mode 100644 configs/nanopi_m1_plus_defconfig
create mode 100644 configs/nanopi_neo2_defconfig
create mode 100644 configs/orangepi_win_defconfig
create mode 100644 configs/orangepi_zero_plus2_defconfig
create mode 100644 configs/sopine_baseboard_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull Request: u-boot-sunxi/master
2017-06-01 13:43 [U-Boot] Pull Request: u-boot-sunxi/master Jagan Teki
@ 2017-06-04 17:11 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-06-04 17:11 UTC (permalink / raw)
To: u-boot
On Thu, Jun 01, 2017 at 01:43:17PM +0000, Jagan Teki wrote:
> Hi Tom,
>
> Please take this PR.
>
> thanks,
> Jagan.
>
> The following changes since commit 4c78028737c3185f49f5691183aeac3478b5f699:
>
> mksunxi_fit_atf.sh: Allow for this to complete when bl31.bin is missing (2017-05-22 20:18:01 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 2dbe9c1362c7481fac93524f65340a48c79eed9a:
>
> sun50i: a64: Add initial Banana Pi M64 support (2017-06-01 09:26:05 +0000)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170604/4bc4e517/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull Request: u-boot-sunxi/master
@ 2017-06-01 13:43 Jagan Teki
2017-06-04 17:11 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2017-06-01 13:43 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please take this PR.
thanks,
Jagan.
The following changes since commit 4c78028737c3185f49f5691183aeac3478b5f699:
mksunxi_fit_atf.sh: Allow for this to complete when bl31.bin is missing (2017-05-22 20:18:01 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 2dbe9c1362c7481fac93524f65340a48c79eed9a:
sun50i: a64: Add initial Banana Pi M64 support (2017-06-01 09:26:05 +0000)
----------------------------------------------------------------
Andre Przywara (1):
sunxi: A64/Pine64: update device tree from Linux
Chen-Yu Tsai (1):
sunxi: Use uart0 as console for Sinlinx SinA33
Jagan Teki (1):
sun50i: a64: Add initial Banana Pi M64 support
Mylene JOSSERAND (2):
sunxi: Add support for NanoPi M1
sunxi: Update NanoPi Neo to use dtsi
arch/arm/dts/Makefile | 2 +
...e64-common.dtsi => sun50i-a64-bananapi-m64.dts} | 72 ++-
arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi | 50 ++
arch/arm/dts/sun50i-a64-pine64-plus.dts | 26 +-
arch/arm/dts/sun50i-a64-pine64.dts | 59 +-
arch/arm/dts/sun50i-a64.dtsi | 639 ++++++---------------
arch/arm/dts/sun8i-h3-nanopi-m1.dts | 64 +++
arch/arm/dts/sun8i-h3-nanopi-neo.dts | 79 +--
arch/arm/dts/sun8i-h3-nanopi.dtsi | 137 +++++
board/sunxi/MAINTAINERS | 10 +
configs/Sinlinx_SinA33_defconfig | 1 +
configs/bananapi_m64_defconfig | 17 +
configs/nanopi_m1_defconfig | 16 +
include/dt-bindings/clock/sun50i-a64-ccu.h | 134 +++++
include/dt-bindings/reset/sun50i-a64-ccu.h | 98 ++++
15 files changed, 828 insertions(+), 576 deletions(-)
rename arch/arm/dts/{sun50i-a64-pine64-common.dtsi => sun50i-a64-bananapi-m64.dts} (70%)
create mode 100644 arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi
create mode 100644 arch/arm/dts/sun8i-h3-nanopi-m1.dts
create mode 100644 arch/arm/dts/sun8i-h3-nanopi.dtsi
create mode 100644 configs/bananapi_m64_defconfig
create mode 100644 configs/nanopi_m1_defconfig
create mode 100644 include/dt-bindings/clock/sun50i-a64-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-a64-ccu.h
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-05-22 10:03 [U-Boot] Pull request: u-boot-sunxi/master Jagan Teki
@ 2017-05-23 0:18 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-05-23 0:18 UTC (permalink / raw)
To: u-boot
On Mon, May 22, 2017 at 03:33:45PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please take this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit 4125bbcef6a998ce8580a1f5c53c8c93a56a125b:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mmc (2017-05-16 08:10:50 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 80b51b5aa91b75d83323fd1fdd253d5f67621784:
>
> sunxi: Move maintainership for Pine64 (2017-05-17 23:24:49 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170522/5ec78878/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-05-22 10:03 Jagan Teki
2017-05-23 0:18 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2017-05-22 10:03 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please take this PR.
thanks!
Jagan.
The following changes since commit 4125bbcef6a998ce8580a1f5c53c8c93a56a125b:
Merge branch 'master' of git://git.denx.de/u-boot-mmc (2017-05-16 08:10:50 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 80b51b5aa91b75d83323fd1fdd253d5f67621784:
sunxi: Move maintainership for Pine64 (2017-05-17 23:24:49 +0530)
----------------------------------------------------------------
Andre Przywara (19):
SPL: FIT: refactor FDT loading
SPL: FIT: rework U-Boot image loading
SPL: FIT: improve error handling
SPL: FIT: factor out spl_load_fit_image()
SPL: FIT: allow loading multiple images
Kconfig: fix SPL_FIT dependency
tools: mksunxiboot: allow larger SPL binaries
armv8: SPL: only compile GIC code if needed
armv8: fsl: move ccn504 code into FSL Makefile
sunxi: A64: move SPL stack to end of SRAM A2
sunxi: SPL: store RAM size in gd
sunxi: SPL: add FIT config selector for Pine64 boards
Makefile: add rules to generate SPL FIT images
sunxi: 64-bit SoCs: introduce FIT generator script
sunxi: defconfig: add supported DT list for Pine64
sunxi: enable automatic FIT build for 64-bit SoCs
sunxi: use SPL header DT name for FIT board matching
sunxi: update Pine64 README
sunxi: Move maintainership for Pine64
Siarhei Siamashka (1):
sunxi: Store the device tree name in the SPL header
Kconfig | 22 ++-
Makefile | 20 +++
arch/arm/include/asm/arch-sunxi/spl.h | 19 ++-
arch/arm/lib/Makefile | 4 +-
arch/arm/mach-sunxi/Kconfig | 4 +
board/sunxi/MAINTAINERS | 6 +-
board/sunxi/README.pine64 | 98 -----------
board/sunxi/README.sunxi64 | 165 +++++++++++++++++++
board/sunxi/board.c | 36 +++-
board/sunxi/mksunxi_fit_atf.sh | 75 +++++++++
common/spl/spl_fit.c | 301 ++++++++++++++++++++++------------
configs/am335x_evm_defconfig | 1 -
configs/pine64_plus_defconfig | 1 +
doc/uImage.FIT/howto.txt | 21 +++
doc/uImage.FIT/multi_spl.its | 89 ++++++++++
include/configs/sunxi-common.h | 17 +-
scripts/Makefile.spl | 3 +-
tools/mksunxiboot.c | 53 +++++-
18 files changed, 710 insertions(+), 225 deletions(-)
delete mode 100644 board/sunxi/README.pine64
create mode 100644 board/sunxi/README.sunxi64
create mode 100755 board/sunxi/mksunxi_fit_atf.sh
create mode 100644 doc/uImage.FIT/multi_spl.its
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-05-08 16:12 Jagan Teki
@ 2017-05-09 0:12 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-05-09 0:12 UTC (permalink / raw)
To: u-boot
On Mon, May 08, 2017 at 09:42:04PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please take this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit e8f86a026125ff2b2d6bd6eac73d2542852aab84:
>
> sunxi: fix the default value of CONS_INDEX on non-A23/A33 SUN8I (2017-04-25 11:44:21 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 5a49b2929c0c73e43470cc53b80a6dfa47b5efda:
>
> sunxi: add support for Banana Pi M2 Plus board (2017-05-04 19:46:23 +0530)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170508/f436b682/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-05-08 16:12 Jagan Teki
2017-05-09 0:12 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2017-05-08 16:12 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please take this PR.
thanks!
Jagan.
The following changes since commit e8f86a026125ff2b2d6bd6eac73d2542852aab84:
sunxi: fix the default value of CONS_INDEX on non-A23/A33 SUN8I (2017-04-25 11:44:21 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 5a49b2929c0c73e43470cc53b80a6dfa47b5efda:
sunxi: add support for Banana Pi M2 Plus board (2017-05-04 19:46:23 +0530)
----------------------------------------------------------------
Icenowy Zheng (3):
sunxi: add clock configuration of R40 sata
sunxi: enable SATA on Banana Pi M2 Ultra
sunxi: add support for Banana Pi M2 Plus board
Jernej Skrabec (6):
sunxi: power: Compile sy8106a driver only during SPL build
sunxi: Move function for later convenience
sunxi: i2c: Add support for DM I2C
sunxi: Enable DM_I2C for A64/H3/H5
sunxi: video: Add A64/H3/H5 HDMI driver
sunxi: Disable DE2 video driver where not needed
Masahiro Yamada (2):
ARM: sunxi: move board/sunxi/Kconfig to arch/arm/mach-sunxi/Kconfig
ARM: sunxi: use imply instead of bare default y in Kconfig
arch/arm/Kconfig | 11 +-
arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 18 +-
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 8 +
arch/arm/include/asm/arch-sunxi/display2.h | 124 ++++++++
{board/sunxi => arch/arm/mach-sunxi}/Kconfig | 38 +--
arch/arm/mach-sunxi/board.c | 2 +
arch/arm/mach-sunxi/clock_sun6i.c | 7 +
board/sunxi/MAINTAINERS | 5 +
board/sunxi/board.c | 196 ++++++-------
configs/Bananapi_M2_Ultra_defconfig | 3 +
configs/Sinovoip_BPI_M2_Plus_defconfig | 20 ++
configs/nanopi_neo_air_defconfig | 1 +
configs/nanopi_neo_defconfig | 1 +
configs/orangepi_zero_defconfig | 1 +
drivers/i2c/mvtwsi.c | 9 +
drivers/power/sy8106a.c | 2 +
drivers/video/sunxi/Makefile | 1 +
drivers/video/sunxi/sunxi_de2.c | 258 +++++++++++++++++
drivers/video/sunxi/sunxi_dw_hdmi.c | 389 ++++++++++++++++++++++++++
include/configs/sunxi-common.h | 9 +-
20 files changed, 979 insertions(+), 124 deletions(-)
create mode 100644 arch/arm/include/asm/arch-sunxi/display2.h
rename {board/sunxi => arch/arm/mach-sunxi}/Kconfig (98%)
create mode 100644 configs/Sinovoip_BPI_M2_Plus_defconfig
create mode 100644 drivers/video/sunxi/sunxi_de2.c
create mode 100644 drivers/video/sunxi/sunxi_dw_hdmi.c
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-04-25 18:56 Jagan Teki
@ 2017-04-26 19:16 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-04-26 19:16 UTC (permalink / raw)
To: u-boot
On Wed, Apr 26, 2017 at 12:26:41AM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please take this PR, probably the last PR for the release.
>
> thanks!
> Jagan.
>
> The following changes since commit f6c1df44b815a08585e7fd3805a1db51a5955d09:
>
> Prepare v2017.05-rc2 (2017-04-17 18:16:49 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to e8f86a026125ff2b2d6bd6eac73d2542852aab84:
>
> sunxi: fix the default value of CONS_INDEX on non-A23/A33 SUN8I (2017-04-25 11:44:21 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170426/775e87cd/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-04-25 18:56 Jagan Teki
2017-04-26 19:16 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2017-04-25 18:56 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please take this PR, probably the last PR for the release.
thanks!
Jagan.
The following changes since commit f6c1df44b815a08585e7fd3805a1db51a5955d09:
Prepare v2017.05-rc2 (2017-04-17 18:16:49 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to e8f86a026125ff2b2d6bd6eac73d2542852aab84:
sunxi: fix the default value of CONS_INDEX on non-A23/A33 SUN8I (2017-04-25 11:44:21 +0200)
----------------------------------------------------------------
Andreas Färber (1):
sunxi: Fix arm64 fdtfile variable
Chen-Yu Tsai (13):
sunxi: Split up long Kconfig lines
sunxi: Add initial support for R40
sunxi: Enable AXP221s in I2C mode with the R40 SoC
sunxi: Fix watchdog reset function for R40
sunxi: Add mmc[1-3] pinmux settings for R40
sunxi: Set PLL lock enable bits for R40
sunxi: Provide defaults for R40 DRAM settings
gpio: sunxi: Add compatible string for R40 PIO
sunxi: Use H3/A64 DRAM initialization code for R40
sunxi: Enable SPL for R40
sunxi: Fix CPUCFG address for R40
sunxi: Add PSCI support for R40
sunxi: Add support for Bananapi M2 Ultra
Icenowy Zheng (4):
sunxi: add basic V3s support
sunxi: add DTSI file for V3s
sunxi: add support for Lichee Pi Zero
sunxi: fix the default value of CONS_INDEX on non-A23/A33 SUN8I
Jelle van der Waa (1):
sunxi: Add maintainer of the NanoPi NEO Air
Jernej Skrabec (3):
sunxi: video: Split out TCON code
sunxi: video: Convert lcdc to use struct display_timing
sunxi: Add clock support for DE2/HDMI/TCON on newer SoCs
Mylène Josserand (9):
sunxi: Move SUNXI_GMAC to Kconfig
sunxi: icnova-a20-swac_defconfig: Remove AXP209_POWER
sunxi: icnova-a20-swac_defconfig: Remove CMD_BMP from
sunxi: mk802_defconfig: Remove SYS_EXTRA_OPTIONS
sunxi: Convert SUNXI_EMAC to Kconfig
sunxi: Convert CONFIG_RGMII to Kconfig
sunxi: Convert CONFIG_SATAPWR to Kconfig
sunxi: Convert CONFIG_MACPWR to Kconfig
sunxi: Convert CONS_INDEX to Kconfig
arch/arm/cpu/armv7/sunxi/psci.c | 35 ++-
arch/arm/dts/Makefile | 4 +
arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts | 69 ++++++
arch/arm/dts/sun8i-r40.dtsi | 183 +++++++++++++++
arch/arm/dts/sun8i-v3s-licheepi-zero.dts | 83 +++++++
arch/arm/dts/sun8i-v3s.dtsi | 284 ++++++++++++++++++++++++
arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 56 +++++
arch/arm/include/asm/arch-sunxi/cpu.h | 1 +
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 6 +-
arch/arm/include/asm/arch-sunxi/display.h | 103 ---------
arch/arm/include/asm/arch-sunxi/dram.h | 4 +-
arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h | 20 +-
arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
arch/arm/include/asm/arch-sunxi/lcdc.h | 128 +++++++++++
arch/arm/include/asm/arch-sunxi/timer.h | 5 +-
arch/arm/include/asm/arch-sunxi/watchdog.h | 5 +-
arch/arm/mach-sunxi/Makefile | 1 +
arch/arm/mach-sunxi/board.c | 19 +-
arch/arm/mach-sunxi/clock_sun6i.c | 47 +++-
arch/arm/mach-sunxi/cpu_info.c | 4 +
arch/arm/mach-sunxi/dram_sun8i_h3.c | 121 ++++++++--
arch/arm/mach-sunxi/pmic_bus.c | 7 +
board/sunxi/Kconfig | 72 +++++-
board/sunxi/MAINTAINERS | 16 ++
board/sunxi/board.c | 48 +++-
configs/A10-OLinuXino-Lime_defconfig | 3 +-
configs/A10s-OLinuXino-M_defconfig | 2 +-
configs/A13-OLinuXinoM_defconfig | 1 -
configs/A13-OLinuXino_defconfig | 1 -
configs/A20-OLinuXino-Lime2_defconfig | 4 +-
configs/A20-OLinuXino-Lime_defconfig | 3 +-
configs/A20-OLinuXino_MICRO_defconfig | 3 +-
configs/A20-Olimex-SOM-EVB_defconfig | 4 +-
configs/Ampe_A76_defconfig | 1 -
configs/Bananapi_M2_Ultra_defconfig | 15 ++
configs/Bananapi_defconfig | 4 +-
configs/Bananapro_defconfig | 4 +-
configs/CHIP_defconfig | 1 -
configs/CHIP_pro_defconfig | 2 +-
configs/CSQ_CS908_defconfig | 2 +-
configs/Colombus_defconfig | 3 +-
configs/Cubieboard2_defconfig | 3 +-
configs/Cubieboard_defconfig | 3 +-
configs/Cubietruck_defconfig | 4 +-
configs/Empire_electronix_d709_defconfig | 1 -
configs/Empire_electronix_m712_defconfig | 1 -
configs/Hummingbird_A31_defconfig | 3 +-
configs/Itead_Ibox_A20_defconfig | 3 +-
configs/Lamobo_R1_defconfig | 5 +-
configs/LicheePi_Zero_defconfig | 12 +
configs/Linksprite_pcDuino3_Nano_defconfig | 4 +-
configs/Linksprite_pcDuino3_defconfig | 3 +-
configs/Linksprite_pcDuino_defconfig | 2 +-
configs/Marsboard_A10_defconfig | 2 +-
configs/Mele_A1000G_quad_defconfig | 2 +-
configs/Mele_A1000_defconfig | 3 +-
configs/Mele_I7_defconfig | 2 +-
configs/Mele_M3_defconfig | 2 +-
configs/Mele_M5_defconfig | 2 +-
configs/Mele_M9_defconfig | 2 +-
configs/Orangepi_defconfig | 4 +-
configs/Orangepi_mini_defconfig | 4 +-
configs/Sinlinx_SinA31s_defconfig | 2 +-
configs/Sinovoip_BPI_M2_defconfig | 3 +-
configs/Sinovoip_BPI_M3_defconfig | 2 +-
configs/Wits_Pro_A20_DKT_defconfig | 3 +-
configs/ba10_tv_box_defconfig | 2 +-
configs/difrnce_dit4350_defconfig | 1 -
configs/ga10h_v1_1_defconfig | 1 -
configs/gt90h_v4_defconfig | 1 -
configs/i12-tvbox_defconfig | 3 +-
configs/iNet_D978_rev2_defconfig | 1 -
configs/icnova-a20-swac_defconfig | 2 +-
configs/inet86dz_defconfig | 1 -
configs/inet98v_rev2_defconfig | 1 -
configs/jesurun_q5_defconfig | 3 +-
configs/mixtile_loftq_defconfig | 4 +-
configs/mk802_defconfig | 1 -
configs/orangepi_plus2e_defconfig | 2 +-
configs/orangepi_plus_defconfig | 3 +-
configs/polaroid_mid2407pxe03_defconfig | 1 -
configs/polaroid_mid2809pxe04_defconfig | 1 -
configs/q8_a13_tablet_defconfig | 1 -
configs/q8_a23_tablet_800x480_defconfig | 1 -
configs/q8_a33_tablet_1024x600_defconfig | 1 -
configs/q8_a33_tablet_800x480_defconfig | 1 -
configs/sun8i_a23_evb_defconfig | 1 -
drivers/gpio/sunxi_gpio.c | 1 +
drivers/net/Kconfig | 17 ++
drivers/power/Kconfig | 16 +-
drivers/serial/Kconfig | 11 +
drivers/video/Makefile | 2 +-
drivers/video/sunxi/Makefile | 8 +
drivers/video/sunxi/lcdc.c | 209 +++++++++++++++++
drivers/video/{ => sunxi}/sunxi_display.c | 220 ++++--------------
include/configs/sun8i.h | 2 +
include/configs/sunxi-common.h | 41 +++-
include/dt-bindings/clock/sun8i-v3s-ccu.h | 107 +++++++++
include/dt-bindings/reset/sun8i-v3s-ccu.h | 78 +++++++
99 files changed, 1793 insertions(+), 404 deletions(-)
create mode 100644 arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
create mode 100644 arch/arm/dts/sun8i-r40.dtsi
create mode 100644 arch/arm/dts/sun8i-v3s-licheepi-zero.dts
create mode 100644 arch/arm/dts/sun8i-v3s.dtsi
create mode 100644 arch/arm/include/asm/arch-sunxi/lcdc.h
create mode 100644 configs/Bananapi_M2_Ultra_defconfig
create mode 100644 configs/LicheePi_Zero_defconfig
create mode 100644 drivers/video/sunxi/Makefile
create mode 100644 drivers/video/sunxi/lcdc.c
rename drivers/video/{ => sunxi}/sunxi_display.c (87%)
create mode 100644 include/dt-bindings/clock/sun8i-v3s-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-v3s-ccu.h
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-04-07 17:52 Jagan Teki
@ 2017-04-09 1:16 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-04-09 1:16 UTC (permalink / raw)
To: u-boot
On Fri, Apr 07, 2017 at 11:22:40PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please take this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit d53ecad92f06d2e38a5cbc13af7473867c7fa277:
>
> Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2017-04-06 20:40:24 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to f7d4d9e52cdcff2a8fcdc80b567a41f48b61951c:
>
> sunxi: Add defconfig for Allwinner A23 EVB (2017-04-07 11:23:46 +0530)
>
Applied to u-boot/master, thanks!
That said, please note that I cannot build orangepi_pc2 with gcc-4.9.x.
If we can somehow gain some space back in SPL on older GCC's that would
be great. Otherwise we need to exclude this from travis-ci for now.
Thanks again!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170408/fc09511a/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-04-07 17:52 Jagan Teki
2017-04-09 1:16 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2017-04-07 17:52 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please take this PR.
thanks!
Jagan.
The following changes since commit d53ecad92f06d2e38a5cbc13af7473867c7fa277:
Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2017-04-06 20:40:24 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to f7d4d9e52cdcff2a8fcdc80b567a41f48b61951c:
sunxi: Add defconfig for Allwinner A23 EVB (2017-04-07 11:23:46 +0530)
----------------------------------------------------------------
Boris Brezillon (3):
mtd: ubi: Select RBTREE option from MTD_UBI Kconfig entry
cmd: Expose a Kconfig option to enable UBIFS commands
cmd: nand: Expose optional suboptions in Kconfig
Chen-Yu Tsai (2):
ARM: dts: sun9i: Add mmc1 pinmux setting
sunxi: Add boards/sunxi and arch/arm/mach-sunxi to sunxi MAINTAINERS entry
Florent Jacquet (1):
sunxi: Add defconfig for Allwinner A23 EVB
Hans de Goede (1):
sunxi: Enable UBI and NAND support
Jelle van der Waa (1):
sunxi: add NanoPi NEO Air defconfig
Maxime Ripard (15):
nand: sunxi: Fix modulo by zero error
bch: Allow to build for the host
tools: sunxi: Add spl image builder
common: Move environment choice to Kconfig
cmd: Add Kconfig option for CMD_MTDPARTS and related options
mtd: sunxi: Select the U-Boot location config option
mtd: sunxi: Change U-Boot offset
sunxi: Add the default mtdids and mtdparts to our env
nand: sunxi: Add options for the SPL NAND configuration
scripts: sunxi: Build an raw SPL image
sunxi: Sync GR8 DTS and AXP209 with the kernel
sunxi: Add support for the CHIP Pro
cmd: ubifs: Add a dependency on CMD_UBI
cmd: nand: Make the NAND options default to NAND_SUNXI
sunxi: Add default environment size
Philipp Tomsich (1):
sun8i_emac: configure PHY reset GPIO via DM
Rask Ingemann Lambertsen (1):
arm: sunxi: Add Sunchip CX-A99 initial support
MAINTAINERS | 3 +
Makefile | 3 +
arch/arm/dts/Makefile | 7 +-
arch/arm/dts/axp209.dtsi | 6 +
arch/arm/dts/sun5i-gr8-chip-pro.dts | 266 +++++++
arch/arm/dts/sun5i-gr8.dtsi | 1132 ++++++++++++++++++++++++++++++
arch/arm/dts/sun8i-h3-nanopi-neo-air.dts | 97 +++
arch/arm/dts/sun9i-a80-cx-a99.dts | 380 ++++++++++
arch/arm/dts/sun9i-a80.dtsi | 8 +
board/sunxi/MAINTAINERS | 6 +
board/sunxi/README.nand | 54 ++
cmd/Kconfig | 51 ++
cmd/mtdparts.c | 8 +
common/Kconfig | 69 ++
configs/CHIP_pro_defconfig | 33 +
configs/Sunchip_CX-A99_defconfig | 22 +
configs/nanopi_neo_air_defconfig | 17 +
configs/sun8i_a23_evb_defconfig | 19 +
drivers/mtd/nand/Kconfig | 19 +-
drivers/mtd/nand/sunxi_nand_spl.c | 7 +-
drivers/mtd/ubi/Kconfig | 1 +
drivers/net/sun8i_emac.c | 86 ++-
include/configs/sunxi-common.h | 35 +-
include/environment.h | 2 +
lib/Kconfig | 5 +
lib/bch.c | 48 ++
scripts/Makefile.spl | 15 +
tools/.gitignore | 1 +
tools/Makefile | 2 +
tools/sunxi-spl-image-builder.c | 484 +++++++++++++
30 files changed, 2863 insertions(+), 23 deletions(-)
create mode 100644 arch/arm/dts/sun5i-gr8-chip-pro.dts
create mode 100644 arch/arm/dts/sun5i-gr8.dtsi
create mode 100644 arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
create mode 100644 arch/arm/dts/sun9i-a80-cx-a99.dts
create mode 100644 board/sunxi/README.nand
create mode 100644 configs/CHIP_pro_defconfig
create mode 100644 configs/Sunchip_CX-A99_defconfig
create mode 100644 configs/nanopi_neo_air_defconfig
create mode 100644 configs/sun8i_a23_evb_defconfig
create mode 100644 tools/sunxi-spl-image-builder.c
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-02-27 14:56 ` Tom Rini
@ 2017-02-28 10:20 ` Andre Przywara
0 siblings, 0 replies; 125+ messages in thread
From: Andre Przywara @ 2017-02-28 10:20 UTC (permalink / raw)
To: u-boot
Hi Tom,
On 27/02/17 14:56, Tom Rini wrote:
> On Mon, Feb 27, 2017 at 07:51:38PM +0530, Jagan Teki wrote:
>> Hi Tom,
>>
>> Please pull this PR.
>>
>> thanks!
>> Jagan
>>
>> The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3:
>>
>> video: mxsfb: Fix reset hang when videomode variable is not present (2017-02-22 21:47:59 +0100)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-sunxi.git master
>>
>> for you to fetch changes up to 35affe7698e95c058a1f6c7eb2e1bf35f82461c9:
>>
>> sunxi: add NanoPi NEO Air defconfig (2017-02-25 13:54:15 +0530)
>>
>> ----------------------------------------------------------------
>> Andre Przywara (12):
>> sunxi: fix ACTLR.SMP assembly routine
>> ARM: rename CONFIG_TIMER_CLK_FREQ to COUNTER_FREQUENCY
>> fsl: ls102x: remove redundant GENERIC_TIMER_CLK
>> sunxi: simplify ACTLR.SMP bit set #ifdef
>> sunxi: configs: merge sun9i and sun50i SPL memory definitions
>> sunxi: Kconfig: introduce CONFIG_SUNXI_HIGH_SRAM
>> sunxi: provide ARMv8 mem_map for every ARM64 board
>> SPI: SPL: sunxi: fix 64-bit build
>> sunxi: DRAM: add Allwinner H5 support
>> sunxi: prepare for sharing MACH_SUN8I_H3 config symbol
>> sunxi: introduce Allwinner H5 config option
>> sunxi: Add OrangePi PC 2 initial support
>>
>> Jelle van der Waa (1):
>> sunxi: add NanoPi NEO Air defconfig
>
> So today is -rc3 day. Which of the above are bug fixes, rather than new
> functionality? Thanks!
So technically only the first patch in my series is a bug fix, maybe the
SPL SPI driver fix as well:
- sunxi: fix ACTLR.SMP assembly routine
- SPI: SPL: sunxi: fix 64-bit build
I think this was sent under the assumption that we stick with the rather
loose merge policy from the past (pulling new things in even after
-rc1). The patches have been on the list for a while, v3 was sent just
two days after the merge window closed, etc.
But I take it that we are getting stricter with this, which is something
I really welcome, because the loose policy led to scarily late merges
and thus breakages in the past.
So from my point of view I am fine with postponing this for the next
merge window, which is basically just around the corner anyway.
For Jelle's patch: I don't know if a new _defconfig (NanoPi NEO Air)
really hurts or could be accepted at this point as well.
Cheers,
Andre.
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-02-27 14:21 Jagan Teki
@ 2017-02-27 14:56 ` Tom Rini
2017-02-28 10:20 ` Andre Przywara
0 siblings, 1 reply; 125+ messages in thread
From: Tom Rini @ 2017-02-27 14:56 UTC (permalink / raw)
To: u-boot
On Mon, Feb 27, 2017 at 07:51:38PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks!
> Jagan
>
> The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3:
>
> video: mxsfb: Fix reset hang when videomode variable is not present (2017-02-22 21:47:59 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 35affe7698e95c058a1f6c7eb2e1bf35f82461c9:
>
> sunxi: add NanoPi NEO Air defconfig (2017-02-25 13:54:15 +0530)
>
> ----------------------------------------------------------------
> Andre Przywara (12):
> sunxi: fix ACTLR.SMP assembly routine
> ARM: rename CONFIG_TIMER_CLK_FREQ to COUNTER_FREQUENCY
> fsl: ls102x: remove redundant GENERIC_TIMER_CLK
> sunxi: simplify ACTLR.SMP bit set #ifdef
> sunxi: configs: merge sun9i and sun50i SPL memory definitions
> sunxi: Kconfig: introduce CONFIG_SUNXI_HIGH_SRAM
> sunxi: provide ARMv8 mem_map for every ARM64 board
> SPI: SPL: sunxi: fix 64-bit build
> sunxi: DRAM: add Allwinner H5 support
> sunxi: prepare for sharing MACH_SUN8I_H3 config symbol
> sunxi: introduce Allwinner H5 config option
> sunxi: Add OrangePi PC 2 initial support
>
> Jelle van der Waa (1):
> sunxi: add NanoPi NEO Air defconfig
So today is -rc3 day. Which of the above are bug fixes, rather than new
functionality? Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170227/6339f5e3/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-02-27 14:21 Jagan Teki
2017-02-27 14:56 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2017-02-27 14:21 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this PR.
thanks!
Jagan
The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3:
video: mxsfb: Fix reset hang when videomode variable is not present (2017-02-22 21:47:59 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 35affe7698e95c058a1f6c7eb2e1bf35f82461c9:
sunxi: add NanoPi NEO Air defconfig (2017-02-25 13:54:15 +0530)
----------------------------------------------------------------
Andre Przywara (12):
sunxi: fix ACTLR.SMP assembly routine
ARM: rename CONFIG_TIMER_CLK_FREQ to COUNTER_FREQUENCY
fsl: ls102x: remove redundant GENERIC_TIMER_CLK
sunxi: simplify ACTLR.SMP bit set #ifdef
sunxi: configs: merge sun9i and sun50i SPL memory definitions
sunxi: Kconfig: introduce CONFIG_SUNXI_HIGH_SRAM
sunxi: provide ARMv8 mem_map for every ARM64 board
SPI: SPL: sunxi: fix 64-bit build
sunxi: DRAM: add Allwinner H5 support
sunxi: prepare for sharing MACH_SUN8I_H3 config symbol
sunxi: introduce Allwinner H5 config option
sunxi: Add OrangePi PC 2 initial support
Jelle van der Waa (1):
sunxi: add NanoPi NEO Air defconfig
arch/arm/Kconfig | 4 +
arch/arm/cpu/armv7/ls102xa/psci.S | 2 +-
arch/arm/cpu/armv7/ls102xa/timer.c | 2 +-
arch/arm/cpu/armv7/nonsec_virt.S | 4 +-
arch/arm/cpu/armv7/sunxi/psci.c | 2 +-
arch/arm/dts/Makefile | 5 +-
arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 147 ++++++++++++++++++++++++++
arch/arm/dts/sun8i-h3-nanopi-neo-air.dts | 97 +++++++++++++++++
arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 4 +-
arch/arm/include/asm/arch-sunxi/cpu.h | 1 +
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 4 +-
arch/arm/include/asm/arch-sunxi/dram.h | 2 +-
arch/arm/include/asm/arch-sunxi/spl.h | 2 +-
arch/arm/mach-sunxi/Makefile | 2 +-
arch/arm/mach-sunxi/board.c | 12 +--
arch/arm/mach-sunxi/clock_sun6i.c | 6 +-
arch/arm/mach-sunxi/cpu_info.c | 2 +
arch/arm/mach-sunxi/dram_sun8i_h3.c | 97 ++++++++++++++---
arch/arm/mach-sunxi/usb_phy.c | 4 +-
board/sunxi/Kconfig | 35 +++++-
board/sunxi/MAINTAINERS | 5 +
board/sunxi/board.c | 6 +-
configs/nanopi_neo_air_defconfig | 17 +++
configs/orangepi_pc2_defconfig | 19 ++++
drivers/mtd/spi/Kconfig | 2 +-
drivers/mtd/spi/sunxi_spi_spl.c | 16 +--
drivers/net/sun8i_emac.c | 2 +-
drivers/power/Kconfig | 4 +-
drivers/usb/host/ehci-sunxi.c | 2 +-
include/configs/exynos-common.h | 2 +-
include/configs/ls1021aiot.h | 7 +-
include/configs/ls1021aqds.h | 7 +-
include/configs/ls1021atwr.h | 7 +-
include/configs/mx7_common.h | 2 +-
include/configs/sun50i.h | 1 -
include/configs/sunxi-common.h | 24 ++---
scripts/config_whitelist.txt | 1 -
37 files changed, 458 insertions(+), 100 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h5-orangepi-pc2.dts
create mode 100644 arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
create mode 100644 configs/nanopi_neo_air_defconfig
create mode 100644 configs/orangepi_pc2_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-01-15 17:27 Jagan Teki
@ 2017-01-16 4:01 ` Tom Rini
0 siblings, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-01-16 4:01 UTC (permalink / raw)
To: u-boot
On Sun, Jan 15, 2017 at 06:27:14PM +0100, Jagan Teki wrote:
> Hi Tom,
>
> Please take this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit 7f73ca484f792a0d2a7ee09860c32f3d02b3030d:
>
> Kconfig: CONFIG_OF_PLATDATA doesn't really exist (2017-01-14 12:20:23 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to 7490130c9f8a4e17e858a38c767ad9ed64bd777b:
>
> sunxi: OrangePi Zero: defconfig: enable SPI flash (2017-01-15 18:22:27 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170115/c10739ae/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-01-15 17:27 Jagan Teki
2017-01-16 4:01 ` Tom Rini
0 siblings, 1 reply; 125+ messages in thread
From: Jagan Teki @ 2017-01-15 17:27 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please take this PR.
thanks!
Jagan.
The following changes since commit 7f73ca484f792a0d2a7ee09860c32f3d02b3030d:
Kconfig: CONFIG_OF_PLATDATA doesn't really exist (2017-01-14 12:20:23 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 7490130c9f8a4e17e858a38c767ad9ed64bd777b:
sunxi: OrangePi Zero: defconfig: enable SPI flash (2017-01-15 18:22:27 +0100)
----------------------------------------------------------------
Andre Przywara (2):
sunxi: dts: OrangePi Zero: add Ethernet node
sunxi: OrangePi Zero: defconfig: enable SPI flash
Icenowy Zheng (2):
sunxi: add proper device tree for Orange Pi Zero boards
sunxi: add orangepi zero defconfig
Jelle van der Waa (1):
sunxi: enable H3 EMAC for the nanopi neo
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts | 154 +++++++++++++++++++++++++++
arch/arm/dts/sun8i-h3-nanopi-neo.dts | 11 ++
board/sunxi/MAINTAINERS | 5 +
configs/orangepi_zero_defconfig | 17 +++
5 files changed, 188 insertions(+)
create mode 100644 arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
create mode 100644 configs/orangepi_zero_defconfig
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-01-04 16:36 Jagan Teki
2017-01-04 16:41 ` Tom Rini
@ 2017-01-10 23:14 ` Tom Rini
1 sibling, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-01-10 23:14 UTC (permalink / raw)
To: u-boot
On Wed, Jan 04, 2017 at 05:36:14PM +0100, Jagan Teki wrote:
> Hi Tom,
>
> Please take this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit 87f5f5417fc897df0b05826b408f0f4b7d2ee388:
>
> Prepare v2017.01-rc3 (2017-01-02 20:00:55 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to eb77f5c9f69ef6c8cb39643b7b7107ef7bff5305:
>
> sunxi: A64: enable SPL (2017-01-04 16:37:43 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170110/cc41785d/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2017-01-04 16:36 Jagan Teki
@ 2017-01-04 16:41 ` Tom Rini
2017-01-10 23:14 ` Tom Rini
1 sibling, 0 replies; 125+ messages in thread
From: Tom Rini @ 2017-01-04 16:41 UTC (permalink / raw)
To: u-boot
On Wed, Jan 04, 2017 at 05:36:14PM +0100, Jagan Teki wrote:
> Hi Tom,
>
> Please take this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit 87f5f5417fc897df0b05826b408f0f4b7d2ee388:
>
> Prepare v2017.01-rc3 (2017-01-02 20:00:55 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to eb77f5c9f69ef6c8cb39643b7b7107ef7bff5305:
>
> sunxi: A64: enable SPL (2017-01-04 16:37:43 +0100)
Sorry, we're too close to release for something this large.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170104/4212208d/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2017-01-04 16:36 Jagan Teki
2017-01-04 16:41 ` Tom Rini
2017-01-10 23:14 ` Tom Rini
0 siblings, 2 replies; 125+ messages in thread
From: Jagan Teki @ 2017-01-04 16:36 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please take this PR.
thanks!
Jagan.
The following changes since commit 87f5f5417fc897df0b05826b408f0f4b7d2ee388:
Prepare v2017.01-rc3 (2017-01-02 20:00:55 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to eb77f5c9f69ef6c8cb39643b7b7107ef7bff5305:
sunxi: A64: enable SPL (2017-01-04 16:37:43 +0100)
----------------------------------------------------------------
Andre Przywara (16):
sun6i: Restrict some register initialization to Allwinner A31 SoC
armv8: prevent using THUMB
armv8: add lowlevel_init.S
SPL: tiny-printf: add "l" modifier
SPL: tiny-printf: ignore "-" modifier
move UL() macro from armv8/mmu.h into common.h
SPL: make struct spl_image 64-bit safe
armv8: add simple sdelay implementation
armv8: move reset branch into boot hook
ARM: boot0 hook: remove macro, include whole header file
sunxi: introduce extra config option for boot0 header
sunxi: A64: do an RMR switch if started in AArch32 mode
sunxi: provide default DRAM config for sun50i in Kconfig
sunxi: H3/A64: fix non-ODT setting
sunxi: DRAM: fix H3 DRAM size display on aarch64
sunxi: A64: enable SPL
Jens Kuske (3):
sunxi: H3: add and rename some DRAM contoller registers
sunxi: H3: add DRAM controller single bit delay support
sunxi: A64: use H3 DRAM initialization code for A64 as well
Philipp Tomsich (2):
sunxi: H3: Rework MBUS priority setup
sunxi: clocks: Use the correct pattern register for PLL11
Priit Laes (1):
spl: sunxi: Fix build error with CONFIG_SPL_SPI_SUNXI
arch/arm/cpu/armv8/Makefile | 1 +
arch/arm/cpu/armv8/cpu.c | 14 +
arch/arm/cpu/armv8/lowlevel_init.S | 44 +++
arch/arm/cpu/armv8/start.S | 5 +-
arch/arm/include/asm/arch-bcm235xx/boot0.h | 8 +-
arch/arm/include/asm/arch-bcm281xx/boot0.h | 8 +-
arch/arm/include/asm/arch-sunxi/boot0.h | 37 ++-
arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 1 +
arch/arm/include/asm/arch-sunxi/cpu.h | 3 +
arch/arm/include/asm/arch-sunxi/dram.h | 2 +-
arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h | 53 ++--
arch/arm/include/asm/armv8/mmu.h | 8 -
arch/arm/lib/Makefile | 2 +
arch/arm/lib/vectors.S | 1 -
arch/arm/mach-omap2/boot-common.c | 2 +-
arch/arm/mach-sunxi/Makefile | 1 +
arch/arm/mach-sunxi/board.c | 2 +-
arch/arm/mach-sunxi/clock_sun6i.c | 10 +-
arch/arm/mach-sunxi/dram_sun8i_h3.c | 400 +++++++++++++++++-------
arch/arm/mach-sunxi/rmr_switch.S | 41 +++
arch/arm/mach-tegra/spl.c | 2 +-
board/sunxi/Kconfig | 27 ++
common/spl/spl.c | 8 +-
common/spl/spl_mmc.c | 2 +-
configs/pine64_plus_defconfig | 5 +-
drivers/mtd/spi/sunxi_spi_spl.c | 2 +-
include/common.h | 13 +-
include/configs/sunxi-common.h | 4 +-
include/spl.h | 4 +-
lib/tiny-printf.c | 50 ++-
30 files changed, 564 insertions(+), 196 deletions(-)
create mode 100644 arch/arm/cpu/armv8/lowlevel_init.S
create mode 100644 arch/arm/mach-sunxi/rmr_switch.S
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2016-12-23 23:33 Jagan Teki
2016-12-26 13:32 ` Tom Rini
@ 2016-12-27 22:54 ` Tom Rini
1 sibling, 0 replies; 125+ messages in thread
From: Tom Rini @ 2016-12-27 22:54 UTC (permalink / raw)
To: u-boot
On Sat, Dec 24, 2016 at 12:33:56AM +0100, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this fix.
>
> thanks!
> Jagan.
>
> The following changes since commit 4cf5c5f1e60e6541630ae829b5fa2db704c268f0:
>
> Prepare v2017.01-rc2 (2016-12-19 16:08:57 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to c23749dbf2601986a23e2654d153e0d66a9804ba:
>
> sunxi: fix SID read on H3 (2016-12-23 13:07:04 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161227/1a2074b5/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
2016-12-23 23:33 Jagan Teki
@ 2016-12-26 13:32 ` Tom Rini
2016-12-27 22:54 ` Tom Rini
1 sibling, 0 replies; 125+ messages in thread
From: Tom Rini @ 2016-12-26 13:32 UTC (permalink / raw)
To: u-boot
On Sat, Dec 24, 2016 at 12:33:56AM +0100, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this fix.
>
> thanks!
> Jagan.
>
> The following changes since commit 4cf5c5f1e60e6541630ae829b5fa2db704c268f0:
>
> Prepare v2017.01-rc2 (2016-12-19 16:08:57 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-sunxi.git master
>
> for you to fetch changes up to c23749dbf2601986a23e2654d153e0d66a9804ba:
>
> sunxi: fix SID read on H3 (2016-12-23 13:07:04 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161226/85228f71/attachment.sig>
^ permalink raw reply [flat|nested] 125+ messages in thread
* [U-Boot] Pull request: u-boot-sunxi/master
@ 2016-12-23 23:33 Jagan Teki
2016-12-26 13:32 ` Tom Rini
2016-12-27 22:54 ` Tom Rini
0 siblings, 2 replies; 125+ messages in thread
From: Jagan Teki @ 2016-12-23 23:33 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull this fix.
thanks!
Jagan.
The following changes since commit 4cf5c5f1e60e6541630ae829b5fa2db704c268f0:
Prepare v2017.01-rc2 (2016-12-19 16:08:57 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to c23749dbf2601986a23e2654d153e0d66a9804ba:
sunxi: fix SID read on H3 (2016-12-23 13:07:04 +0100)
----------------------------------------------------------------
Icenowy Zheng (1):
sunxi: fix SID read on H3
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 1 +
arch/arm/mach-sunxi/cpu_info.c | 44 +++++++++++++++++++++++++++++
2 files changed, 45 insertions(+)
^ permalink raw reply [flat|nested] 125+ messages in thread
end of thread, other threads:[~2019-10-30 17:01 UTC | newest]
Thread overview: 125+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-27 13:02 [U-Boot] Pull request: u-boot-sunxi/master Jagan Teki
2018-04-29 21:05 ` Tom Rini
2018-04-30 10:39 ` Jagan Teki
2018-04-30 16:15 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2019-10-26 17:48 Jagan Teki
2019-10-30 17:01 ` Tom Rini
2019-07-16 14:59 Jagan Teki
2019-07-17 12:27 ` Tom Rini
2019-05-20 17:15 Jagan Teki
2019-05-21 15:44 ` Tom Rini
2019-04-27 16:17 Jagan Teki
2019-04-27 21:46 ` Tom Rini
2019-04-29 17:14 ` Jagan Teki
2019-04-17 12:27 Jagan Teki
2019-04-18 16:20 ` Tom Rini
2019-04-12 13:04 Jagan Teki
2019-04-13 3:41 ` Tom Rini
2019-04-01 16:30 Jagan Teki
2019-04-01 19:55 ` Tom Rini
2019-03-11 17:29 Jagan Teki
2019-03-12 14:55 ` Tom Rini
2019-02-28 19:08 Jagan Teki
2019-02-28 23:55 ` Tom Rini
2019-02-14 17:20 Jagan Teki
2019-02-16 1:09 ` Tom Rini
2019-01-30 16:26 Jagan Teki
2019-01-31 2:42 ` Tom Rini
2019-01-24 20:14 Jagan Teki
2019-01-25 15:17 ` Tom Rini
2019-01-10 9:20 Jagan Teki
2019-01-10 23:18 ` Tom Rini
2019-01-01 19:22 Jagan Teki
2019-01-02 1:02 ` Tom Rini
2018-12-07 20:54 Jagan Teki
2018-12-08 13:49 ` Tom Rini
2018-11-26 18:27 Jagan Teki
2018-11-27 3:12 ` Tom Rini
2018-11-13 19:19 Jagan Teki
2018-11-13 19:42 ` Tom Rini
2018-11-13 20:05 ` Jagan Teki
2018-11-15 21:04 ` Tom Rini
2018-10-26 15:00 Jagan Teki
2018-10-26 17:08 ` Tom Rini
2018-10-12 6:16 Jagan Teki
2018-10-15 12:41 ` Tom Rini
2018-09-28 16:44 Jagan Teki
2018-09-30 2:27 ` Tom Rini
2018-08-24 8:50 Jagan Teki
2018-08-25 13:16 ` Tom Rini
2018-08-20 12:44 Jagan Teki
2018-08-20 22:11 ` Tom Rini
2018-07-31 18:11 Jagan Teki
2018-08-01 11:13 ` Tom Rini
2018-08-01 11:47 ` Jagan Teki
2018-08-01 12:43 ` Chen-Yu Tsai
2018-08-01 12:55 ` Tom Rini
2018-08-01 12:58 ` Chen-Yu Tsai
2018-08-01 13:02 ` Tom Rini
2018-08-02 9:27 ` Jagan Teki
2018-08-02 11:13 ` Tom Rini
2018-08-04 17:48 ` Jagan Teki
2018-08-04 17:52 ` Icenowy Zheng
2018-08-04 18:34 ` Icenowy Zheng
2018-08-04 18:51 ` Tom Rini
2018-08-04 18:52 ` Icenowy Zheng
2018-08-04 18:58 ` Icenowy Zheng
2018-08-04 20:11 ` Tom Rini
2018-08-05 11:59 ` Tom Rini
2018-07-17 15:45 Jagan Teki
2018-07-18 0:30 ` Tom Rini
2018-07-03 16:39 Jagan Teki
2018-07-04 16:28 ` Tom Rini
2018-06-04 12:43 Jagan Teki
2018-06-04 15:09 ` Tom Rini
2018-05-09 11:03 Jagan Teki
2018-05-10 11:16 ` Tom Rini
2018-04-04 8:55 Jagan Teki
2018-04-05 23:39 ` Tom Rini
2018-03-19 20:00 Jagan Teki
2018-03-20 0:09 ` Tom Rini
2018-03-14 14:05 Jagan Teki
2018-03-15 12:26 ` Tom Rini
2018-01-26 14:35 Jagan Teki
2018-01-26 21:00 ` Tom Rini
2018-01-11 19:02 Jagan Teki
2018-01-12 12:18 ` Tom Rini
2017-12-19 11:47 Jagan Teki
2017-12-19 20:44 ` Tom Rini
2017-11-10 14:07 Jagan Teki
2017-11-10 15:28 ` Tom Rini
2017-11-09 11:45 Jagan Teki
2017-11-10 3:20 ` Tom Rini
2017-09-01 17:10 Jagan Teki
2017-09-01 18:02 ` Tom Rini
2017-08-29 7:27 Jagan Teki
2017-09-01 16:42 ` Tom Rini
2017-09-01 16:48 ` Jagan Teki
2017-08-16 13:11 Jagan Teki
2017-08-17 1:17 ` Tom Rini
2017-06-16 16:24 Jagan Teki
2017-06-16 17:13 ` Siarhei Siamashka
2017-06-16 19:11 ` Jagan Teki
2017-06-20 2:53 ` Jagan Teki
2017-06-20 2:54 ` Tom Rini
2017-06-01 13:43 [U-Boot] Pull Request: u-boot-sunxi/master Jagan Teki
2017-06-04 17:11 ` Tom Rini
2017-05-22 10:03 [U-Boot] Pull request: u-boot-sunxi/master Jagan Teki
2017-05-23 0:18 ` Tom Rini
2017-05-08 16:12 Jagan Teki
2017-05-09 0:12 ` Tom Rini
2017-04-25 18:56 Jagan Teki
2017-04-26 19:16 ` Tom Rini
2017-04-07 17:52 Jagan Teki
2017-04-09 1:16 ` Tom Rini
2017-02-27 14:21 Jagan Teki
2017-02-27 14:56 ` Tom Rini
2017-02-28 10:20 ` Andre Przywara
2017-01-15 17:27 Jagan Teki
2017-01-16 4:01 ` Tom Rini
2017-01-04 16:36 Jagan Teki
2017-01-04 16:41 ` Tom Rini
2017-01-10 23:14 ` Tom Rini
2016-12-23 23:33 Jagan Teki
2016-12-26 13:32 ` Tom Rini
2016-12-27 22:54 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.