All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Reichel <sre@kernel.org>
To: "Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>
Cc: lgirdwood@gmail.com, broonie@kernel.org, lee.jones@linaro.org,
	robh+dt@kernel.org, mark.rutland@arm.com,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH 4/4] dt-bindings: mfd: max8998: Add charger subnode binding
Date: Tue, 1 May 2018 14:45:40 +0200	[thread overview]
Message-ID: <20180501124540.3icpjevaxp44ew2e@earth.universe> (raw)
In-Reply-To: <1524844982-4714-5-git-send-email-pawel.mikolaj.chmiel@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 2417 bytes --]

Hi,

On Fri, Apr 27, 2018 at 06:03:02PM +0200, Paweł Chmiel wrote:
> This patch adds devicetree bindings documentation for
> battery charging controller as the subnode of MAX8998 PMIC.
> It's based on current behavior of driver.
> 
> Fixes: ee999fb3f17f ("mfd: max8998: Add support for Device Tree")
> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
> ---
>  Documentation/devicetree/bindings/mfd/max8998.txt | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt
> index 23a3650ff2a2..f95610afb57f 100644
> --- a/Documentation/devicetree/bindings/mfd/max8998.txt
> +++ b/Documentation/devicetree/bindings/mfd/max8998.txt
> @@ -50,6 +50,21 @@ Additional properties required if max8998,pmic-buck2-dvs-gpio is defined:
>  - max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts
>    for buck2 regulator that can be selected using dvs gpio.
>  
> +Charger: Configuration for battery charging controller should be added
> +inside a child node named 'charger'.
> +  Required properties:
> +  - max8998,charge-eoc: Setup "End of Charge". If value equals 0,
> +    remain value set from bootloader or default value will be used.
> +    Valid values: 0, 10 - 45
> +
> +  - max8998,charge-restart: Setup "Charge Restart Level". If value equals 0,
> +    remain value set from bootloader or default value will be used.
> +    Valid values: -1, 0, 100, 150, 200
> +
> +  - max8998,charge-timeout: Setup "Charge Full Timeout". If value equals 0,
> +    remain value set from bootloader or default value will be used.
> +    Valid values: -1, 0, 5, 6, 7

What are those values? seconds?

> +
>  Regulators: All the regulators of MAX8998 to be instantiated shall be
>  listed in a child node named 'regulators'. Each regulator is represented
>  by a child node of the 'regulators' node.
> @@ -99,6 +114,13 @@ Example:
>  		max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */
>  		max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>;
>  
> +		/* Charger configuration */
> +		charger {
> +			max8998,charge-eoc = <0>;
> +			max8998,charge-restart = <(-1)>;
> +			max8998,charge-timeout = <7>;
> +		};
> +
>  		/* Regulators to instantiate */
>  		regulators {
>  			ldo2_reg: LDO2 {
> -- 
> 2.7.4
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  parent reply	other threads:[~2018-05-01 12:45 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-27 16:02 [PATCH 0/4] mfd: max8998: Device Tree support fixes Paweł Chmiel
2018-04-27 16:02 ` [PATCH 1/4] regulator: max8998: Fix platform data retrieval Paweł Chmiel
2018-04-27 16:03 ` [PATCH 2/4] power: supply: max8998-charger: " Paweł Chmiel
2018-04-27 16:03 ` [PATCH 3/4] power: supply: max8998-charger: Parse device tree for required data Paweł Chmiel
2018-04-27 16:03 ` [PATCH 4/4] dt-bindings: mfd: max8998: Add charger subnode binding Paweł Chmiel
2018-04-30 12:30   ` Lee Jones
2018-04-30 14:59     ` Paweł Chmiel
2018-05-01 12:45   ` Sebastian Reichel [this message]
2018-05-01 14:43     ` Paweł Chmiel
2019-01-10 17:47       ` Sylwester Nawrocki
2019-01-10 20:11         ` Paweł Chmiel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180501124540.3icpjevaxp44ew2e@earth.universe \
    --to=sre@kernel.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.mikolaj.chmiel@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.