From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-sn1nam01on0080.outbound.protection.outlook.com ([104.47.32.80]:18380 "EHLO NAM01-SN1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1756353AbeEAR5H (ORCPT ); Tue, 1 May 2018 13:57:07 -0400 From: Martin Kelly To: linux-iio@vger.kernel.org Cc: Jean-Baptiste Maneyrol , Martin Kelly Subject: [PATCH 1/2] iio: imu: inv_mpu6050: minor wording fixes Date: Tue, 1 May 2018 10:56:41 -0700 Message-Id: <20180501175642.8551-2-mkelly@xevo.com> In-Reply-To: <20180501175642.8551-1-mkelly@xevo.com> References: <20180501175642.8551-1-mkelly@xevo.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org Just some minor grammar/spelling fixes of things I noticed while reading the code. Signed-off-by: Martin Kelly --- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 2 +- drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 2 +- drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index aafa77766b08..59dbdeb08da4 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -176,7 +176,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask) return result; if (en) { - /* Wait for output stabilize */ + /* Wait for output to stabilize */ msleep(INV_MPU6050_TEMP_UP_TIME); if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) { /* switch internal clock to PLL */ diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c index 90fdc5eaef53..65dcb92be9f6 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c @@ -53,7 +53,7 @@ static int inv_mpu6050_deselect_bypass(struct i2c_mux_core *muxc, u32 chan_id) mutex_lock(&st->lock); - /* It doesn't really mattter, if any of the calls fails */ + /* It doesn't really matter if any of the calls fail */ regmap_write(st->map, st->reg->int_pin_cfg, st->irq_mask); inv_mpu6050_set_power_itg(st, false); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c index e51404fdce97..0cb7c20100ca 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -155,7 +155,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR; /* - * read fifo_count register to know how many bytes inside FIFO + * read fifo_count register to know how many bytes are inside the FIFO * right now */ result = regmap_bulk_read(st->map, st->reg->fifo_count_h, data, @@ -165,7 +165,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) fifo_count = be16_to_cpup((__be16 *)(&data[0])); if (fifo_count < bytes_per_datum) goto end_session; - /* fifo count can't be odd number, if it is odd, reset fifo*/ + /* fifo count can't be an odd number. If it is odd, reset the FIFO. */ if (fifo_count & 1) goto flush_fifo; if (fifo_count > INV_MPU6050_FIFO_THRESHOLD) -- 2.11.0