All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Gibson <david@gibson.dropbear.id.au>
To: groug@kaod.org, clg@kaod.org
Cc: qemu-ppc@nongnu.org, qemu-devel@nongnu.org, lvivier@redhat.com,
	David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PATCH 1/8] target/ppc: Add ppc_store_lpcr() helper
Date: Thu,  3 May 2018 16:21:38 +1000	[thread overview]
Message-ID: <20180503062145.17899-2-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20180503062145.17899-1-david@gibson.dropbear.id.au>

There are some fields in the cpu state which need to be updated when the
LPCR register is changed, which is done by ppc_hash64_update_rmls() and
ppc_hash64_update_vrma().  Code which alters env->spr[SPR_LPCR] needs to
call them afterwards to make sure the state is up to date.

That's easy to get wrong.  The normal way of dealing with sitautions like
that is to use a helper which both updates the basic register value and the
derived state.

So, do that.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
 target/ppc/mmu-hash64.c     | 15 +++++++++++----
 target/ppc/mmu-hash64.h     |  3 +--
 target/ppc/translate_init.c |  6 +-----
 3 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
index 7e0adecfd9..a1db20e3a8 100644
--- a/target/ppc/mmu-hash64.c
+++ b/target/ppc/mmu-hash64.c
@@ -942,7 +942,7 @@ void ppc_hash64_tlb_flush_hpte(PowerPCCPU *cpu, target_ulong ptex,
     cpu->env.tlb_need_flush = TLB_NEED_GLOBAL_FLUSH | TLB_NEED_LOCAL_FLUSH;
 }
 
-void ppc_hash64_update_rmls(PowerPCCPU *cpu)
+static void ppc_hash64_update_rmls(PowerPCCPU *cpu)
 {
     CPUPPCState *env = &cpu->env;
     uint64_t lpcr = env->spr[SPR_LPCR];
@@ -977,7 +977,7 @@ void ppc_hash64_update_rmls(PowerPCCPU *cpu)
     }
 }
 
-void ppc_hash64_update_vrma(PowerPCCPU *cpu)
+static void ppc_hash64_update_vrma(PowerPCCPU *cpu)
 {
     CPUPPCState *env = &cpu->env;
     const PPCHash64SegmentPageSizes *sps = NULL;
@@ -1028,9 +1028,9 @@ void ppc_hash64_update_vrma(PowerPCCPU *cpu)
     slb->sps = sps;
 }
 
-void helper_store_lpcr(CPUPPCState *env, target_ulong val)
+void ppc_store_lpcr(PowerPCCPU *cpu, target_ulong val)
 {
-    PowerPCCPU *cpu = ppc_env_get_cpu(env);
+    CPUPPCState *env = &cpu->env;
     uint64_t lpcr = 0;
 
     /* Filter out bits */
@@ -1096,6 +1096,13 @@ void helper_store_lpcr(CPUPPCState *env, target_ulong val)
     ppc_hash64_update_vrma(cpu);
 }
 
+void helper_store_lpcr(CPUPPCState *env, target_ulong val)
+{
+    PowerPCCPU *cpu = ppc_env_get_cpu(env);
+
+    ppc_store_lpcr(cpu, val);
+}
+
 void ppc_hash64_init(PowerPCCPU *cpu)
 {
     CPUPPCState *env = &cpu->env;
diff --git a/target/ppc/mmu-hash64.h b/target/ppc/mmu-hash64.h
index f6349ccdb3..53dcec5b93 100644
--- a/target/ppc/mmu-hash64.h
+++ b/target/ppc/mmu-hash64.h
@@ -17,8 +17,7 @@ void ppc_hash64_tlb_flush_hpte(PowerPCCPU *cpu,
                                target_ulong pte0, target_ulong pte1);
 unsigned ppc_hash64_hpte_page_shift_noslb(PowerPCCPU *cpu,
                                           uint64_t pte0, uint64_t pte1);
-void ppc_hash64_update_vrma(PowerPCCPU *cpu);
-void ppc_hash64_update_rmls(PowerPCCPU *cpu);
+void ppc_store_lpcr(PowerPCCPU *cpu, target_ulong val);
 void ppc_hash64_init(PowerPCCPU *cpu);
 void ppc_hash64_finalize(PowerPCCPU *cpu);
 #endif
diff --git a/target/ppc/translate_init.c b/target/ppc/translate_init.c
index c83c910a29..3fd380dad6 100644
--- a/target/ppc/translate_init.c
+++ b/target/ppc/translate_init.c
@@ -8940,15 +8940,11 @@ void cpu_ppc_set_papr(PowerPCCPU *cpu, PPCVirtualHypervisor *vhyp)
     /* We should be followed by a CPU reset but update the active value
      * just in case...
      */
-    env->spr[SPR_LPCR] = lpcr->default_value;
+    ppc_store_lpcr(cpu, lpcr->default_value);
 
     /* Set a full AMOR so guest can use the AMR as it sees fit */
     env->spr[SPR_AMOR] = amor->default_value = 0xffffffffffffffffull;
 
-    /* Update some env bits based on new LPCR value */
-    ppc_hash64_update_rmls(cpu);
-    ppc_hash64_update_vrma(cpu);
-
     /* Tell KVM that we're in PAPR mode */
     if (kvm_enabled()) {
         kvmppc_set_papr(cpu);
-- 
2.17.0

  reply	other threads:[~2018-05-03  6:21 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-03  6:21 [Qemu-devel] [PATCH 0/8] spapr: Cleanups to startup and LPCR handling David Gibson
2018-05-03  6:21 ` David Gibson [this message]
2018-05-03  7:06   ` [Qemu-devel] [PATCH 1/8] target/ppc: Add ppc_store_lpcr() helper Cédric Le Goater
2018-05-03  7:16     ` David Gibson
2018-05-03 12:41   ` Greg Kurz
2018-05-03  6:21 ` [Qemu-devel] [PATCH 2/8] spapr: Clean up rtas_start_cpu() & rtas_stop_self() David Gibson
2018-05-03  7:11   ` Cédric Le Goater
2018-05-03 15:13   ` Greg Kurz
2018-05-04  5:01     ` David Gibson
2018-05-03  6:21 ` [Qemu-devel] [PATCH 3/8] spapr: Remove unhelpful helpers from rtas_start_cpu() David Gibson
2018-05-03  7:18   ` Cédric Le Goater
2018-05-03 16:34   ` Greg Kurz
2018-05-04  5:00     ` David Gibson
2018-05-04  6:43       ` Greg Kurz
2018-05-03  6:21 ` [Qemu-devel] [PATCH 4/8] spapr: Make a helper to set up cpu entry point state David Gibson
2018-05-03 16:36   ` Greg Kurz
2018-05-03  6:21 ` [Qemu-devel] [PATCH 5/8] spapr: Clean up LPCR updates from hypercalls David Gibson
2018-05-03  7:24   ` Cédric Le Goater
2018-05-03  6:21 ` [Qemu-devel] [PATCH 6/8] target/ppc: Delay initialization of LPCR_UPRT for secondary cpus David Gibson
2018-05-03  7:27   ` Cédric Le Goater
2018-05-03  6:21 ` [Qemu-devel] [PATCH 7/8] spapr: Move PAPR mode cpu setup fully to spapr code David Gibson
2018-05-03  7:30   ` Cédric Le Goater
2018-05-03  6:21 ` [Qemu-devel] [PATCH 8/8] spapr: Clean up handling of LPCR power-saving exit bits David Gibson
2018-05-03  7:47   ` Cédric Le Goater
2018-05-03 11:59     ` David Gibson
2018-05-03 14:32       ` Cédric Le Goater

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180503062145.17899-2-david@gibson.dropbear.id.au \
    --to=david@gibson.dropbear.id.au \
    --cc=clg@kaod.org \
    --cc=groug@kaod.org \
    --cc=lvivier@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.