On Monday 07 May 2018 19:59:14 Mario.Limonciello@dell.com wrote: > > -----Original Message----- > > From: Dmitry Torokhov [mailto:dmitry.torokhov@gmail.com] > > Sent: Monday, May 7, 2018 2:33 PM > > To: Pali Rohár > > Cc: Limonciello, Mario; linux-input@vger.kernel.org; linux-kernel@vger.kernel.org > > Subject: Re: Dell docking station & Dell Embedded Controller & PS/2 devices > > > > On Mon, May 07, 2018 at 10:44:31AM +0200, Pali Rohár wrote: > > > On Sunday 06 May 2018 15:47:33 Pali Rohár wrote: > > > > On Thursday 01 February 2018 11:29:45 Dmitry Torokhov wrote: > > > > > Hi Pali, > > > > > > > > > > On Wed, Jan 24, 2018 at 11:41:21AM +0100, Pali Rohár wrote: > > > > > > Hi Dmitry! > > > > > > > > > > > > I'm observing a problem with internal touchpad (handled by psmouse.ko) > > > > > > on Dell laptops connected to Dell E docking station. When I connect > > > > > > external PS/2 keyboard to docking station then internal laptop touchpad > > > > > > switch from multitouch absolute mode to relative bare PS/2 mode. > > > > > > > > > > > > And because ALPS driver in psmouse.ko is capable to process interleaved > > > > > > bare 3-byte PS/2 packets with 6-byte ALPS packets (which handles > > > > > > trackstick data on some ALPS models), ALPS driver does not show any > > > > > > message about this "downgrade" from multitouch to bare mode. And > > > > > > continue working in bare mode. > > > > > > > > > > > > When I rmmod psmouse and modprobe it again, then touchpad switch back > > to > > > > > > multitouch mode. > > > > > > > > > > > > Mario told me that Dell Embedded Controller, which handle internal > > > > > > keyboard, internal touchpad and external PS/2 keyboard, automatically > > > > > > send RESET command to *all* those devices when external PS/2 keyboard is > > > > > > connected. Therefore this is reason why touchpad downgrade to to bare > > > > > > mode. And according to Mario, host system should issue vendor specific > > > > > > PS/2 commands to re-initialize all PS/2 devices when this situation > > > > > > happen. Mario also told me that Windows is doing this action. > > > > > > > > > > Yeah, I remember fun with Inspiron 8100 - when you dock it it woudl > > > > > silently switch Synaptics touchpad into standard mode and it would not > > > > > come back as Synaptics until you disconnect. And there was no > > > > > notification to the kernel as far as I could tell. > > > > > > > > > > It could be that we need to monitor dock events and then kick reconnect > > > > > of serio port, either from userspace via udev (I think that would be > > > > > preferred), or in kernel. > > > > > > > > > > > > > > > > > Every time when I connect external PS/2 keyboard to dock I see this > > > > > > message in dmesg: > > > > > > > > > > > > Spurious ACK... Some program might be trying to access hardware directly. > > > > > > > > > > > > I see it also every time when I dock laptop into docking station (to > > > > > > which is keyboard already connected). And it happens also when I connect > > > > > > external PS/2 mouse to dock. > > > > > > > > > > > > Dmitry, how to handle this situation to re-initialize psmouse.ko when > > > > > > external PS/2 device is connected to Dell E docking station? According > > > > > > to Mario, this is how Dell Embedded Controller is designed and suppose > > > > > > how OS should work with it. > > > > > > > > > > > > Manually rmmoding and modprobing for every docking/undocking laptop is > > > > > > not ideal solution. > > > > > > > > > > > > Could it be possible to use that Spurious ATKBD_RET_ACK from atkbd.c be > > > > > > handled on Dell systems (probably via DMI) as an event to reset and > > > > > > reinitialize all PS/2 devices? > > > > > > > > > > So we need to figure out what exactly we are getting from the docking > > > > > station in this case. We do try to handle the new device 0xaa 0x00 > > > > > announcements: > > > > > > > > > > /* Check if this is a new device announcement (0xAA 0x00) */ > > > > > if (unlikely(psmouse->packet[0] == PSMOUSE_RET_BAT && psmouse- > > >pktcnt <= 2)) { > > > > > if (psmouse->pktcnt == 1) { > > > > > psmouse->last = jiffies; > > > > > goto out; > > > > > } > > > > > > > > > > if (psmouse->packet[1] == PSMOUSE_RET_ID || > > > > > (psmouse->protocol->type == PSMOUSE_HGPK && > > > > > psmouse->packet[1] == PSMOUSE_RET_BAT)) { > > > > > __psmouse_set_state(psmouse, PSMOUSE_IGNORE); > > > > > serio_reconnect(serio); > > > > > goto out; > > > > > } > > > > > > > > > > ... > > > > > > > > > > I am not sure where the "spurious ACK comes from". Can you enable i8042 > > > > > debug before trying to dock and capture the data stream from the mouse? > > > > > > > > > > Thanks. > > > > > > > > > > > > > Hi Dmitry! > > > > > > > > I enabled unmask_kbd_data and debug and here is output from dmesg. > > > > > > > > echo Y > /sys/module/i8042/parameters/debug > > > > echo Y > /sys/module/i8042/parameters/unmask_kbd_data > > > > > > > > PS/2 keyboard is already connected in dock and laptop was just docked: > > > > > > > > [25461.552314] i8042: [6365474] fa <- i8042 (interrupt, 0, 1) > > > > [25461.552319] atkbd serio0: Spurious ACK on isa0060/serio0. Some program > > might be trying to access hardware directly. > > > > [25462.707296] i8042: [6365763] ed -> i8042 (kbd-data) > > > > [25462.851289] i8042: [6365799] fa <- i8042 (interrupt, 0, 1) > > > > [25462.851303] i8042: [6365799] 00 -> i8042 (kbd-data) > > > > [25462.858437] i8042: [6365801] fa <- i8042 (interrupt, 0, 1) > > > > [25462.869512] i8042: [6365804] fa <- i8042 (interrupt, 0, 1) > > > > [25462.869517] atkbd serio0: Spurious ACK on isa0060/serio0. Some program > > might be trying to access hardware directly. > > > > [25463.670515] i8042: [6366004] ed -> i8042 (kbd-data) > > > > [25463.670647] i8042: [6366004] fa <- i8042 (interrupt, 0, 1) > > > > [25463.670655] i8042: [6366004] 02 -> i8042 (kbd-data) > > > > [25463.676769] i8042: [6366005] fa <- i8042 (interrupt, 0, 1) > > > > > > > > > > > > Laptop is docked and PS/2 keyboard was just connected: > > > > > > > > [26571.014368] i8042: [6642848] fa <- i8042 (interrupt, 0, 1) > > > > [26571.014380] atkbd serio0: Spurious ACK on isa0060/serio0. Some program > > might be trying to access hardware directly. > > > > > > > > > > > > In both cases there is no events from touchpad, only from keyboard. So > > > > Dell EC silently reset PS/2 touchpad when PS/2 keyboard is attached. > > > > > > > > So I think we should capture 0xFA and on Dell machines we should > > > > reinitialize PS/2 drivers. As there is really nothing more then 0xFA. > > > > > > Info about PS/2 mouse: > > > > > > In case I have laptop already docked and just connect PS/2 mouse there > > > is absolutely no i8042 event. > > > > > > To check that mouse is worked I clicked button and then in dmesg > > > appeared: > > > > > > [ 3945.481403] i8042: [986322] 09 <- i8042 (interrupt, 1, 12) > > > [ 3945.482486] i8042: [986323] 00 <- i8042 (interrupt, 1, 12) > > > [ 3945.483667] i8042: [986323] 00 <- i8042 (interrupt, 1, 12) > > > [ 3945.483917] input: PS/2 ALPS Mouse as > > /devices/platform/i8042/serio1/input/input36 > > > [ 3945.594926] i8042: [986351] 08 <- i8042 (interrupt, 1, 12) > > > [ 3945.596062] i8042: [986351] 00 <- i8042 (interrupt, 1, 12) > > > [ 3945.597203] i8042: [986351] 00 <- i8042 (interrupt, 1, 12) > > > > > > So we have no way to detect when external PS/2 mouse was connected to > > > dock. But ALPS driver can deal with it and process these mouse events. > > > > > > And when I have already connected PS/2 mouse to the dock and I'm just > > > putting laptop into dock, then I get following events: > > > > > > [ 4336.481381] i8042: [1084079] fa <- i8042 (interrupt, 0, 1) > > > [ 4336.481388] atkbd serio0: Spurious ACK on isa0060/serio0. Some program > > might be trying to access hardware directly. > > > [ 4337.653275] i8042: [1084372] ed -> i8042 (kbd-data) > > > > I wonder where this "set leds" command is coming from and where is the > > parameter... Can you add some more tracing? And maybe boot with > > libps2.dyndbg=+pf > > > > > [ 4337.949198] i8042: [1084446] fa <- i8042 (interrupt, 0, 1) > > > [ 4337.949202] atkbd serio0: Spurious ACK on isa0060/serio0. Some program > > might be trying to access hardware directly. > > > [ 4338.623167] i8042: [1084615] ed -> i8042 (kbd-data) > > > > > > So again, no event from mouse, just from keyboard. > > > > > > Note that in these tests I have disconnected my PS/2 keyboard from > > > dock. > > > > So I guess you could write a platform driver that would install i8042 > > filter on Dell laptops/portables, monitor keyboard data stream and kick > > of rescans on serio ports. The problem is filter gets "serio" so you do > > not really know whether ACK is spurious or not. And I would really > > prefer keeping this crap out of atkbd proper... And all of this is racy > > as hell. What happens if we get keyboard reconnected as we reinitialize > > it? > > If it's done as a platform driver I would suspect it's possible to tell whether > a dock is connected to at least give you some heuristic here to have a better > guess whether it's spurious. Apparently checking for docking station is not enough. There are also Dell Legacy Extenders (or how it is called) which exports internal PS/2, Parallel and Serial Ports. It is also connecting to bottom of laptop. But currently I do not have them for testing. > Pali on your system that supports this dock, check and see how many > System Enclosure SMBIOS tables (structure type 03) are present. Do you mean DMI type 3 structure? Here is something from dmidecode: Handle 0x0003, DMI type 3, 22 bytes Chassis Information Manufacturer: Dell Inc. Type: Laptop Lock: Not Present Version: Not Specified Serial Number: --REMOVED-- Asset Tag: Not Specified Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 SKU Number: To be filled by O.E.M. But probably you mean something different? > There should be a separate one for the dock as far as I can tell with values > that will vary based on whether it's attached. > > Assuming that's true I think making a platform filter driver that only attaches > to systems that actually support this type of dock should be possible too. > > > > > Mario, how does Windows driver know when it should send "vendor" > > commands to reinitialize peripherals? > > > > Sorry , I don't know. It's "inbox" Windows drivers that are used here so > it's a "black box" to me how they work. > -- Pali Rohár pali.rohar@gmail.com