All of lore.kernel.org
 help / color / mirror / Atom feed
From: Giulio Benetti <giulio.benetti@micronovasrl.com>
To: a.zummo@towertech.it
Cc: alexandre.belloni@bootlin.com, robh+dt@kernel.org,
	mark.rutland@arm.com, linux-rtc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Giulio Benetti <giulio.benetti@micronovasrl.com>
Subject: [PATCH 2/4] rtc: ds1307: support m41t11 variant
Date: Tue,  8 May 2018 16:56:09 +0200	[thread overview]
Message-ID: <20180508145611.49072-2-giulio.benetti@micronovasrl.com> (raw)
In-Reply-To: <20180508145611.49072-1-giulio.benetti@micronovasrl.com>

The m41t11 variant is very similar to the already supported m41t00 and
m41t0, but it has also 56 bytes of NVRAM.

Add it to driver taking into account NVRAM section.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
---
 .../devicetree/bindings/rtc/rtc-ds1307.txt         |  1 +
 drivers/rtc/rtc-ds1307.c                           | 14 ++++++++++++++
 2 files changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
index d28d6e7f6ae8..ce6469c1a516 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
@@ -13,6 +13,7 @@ Required properties:
 	"maxim,ds3231",
 	"st,m41t0",
 	"st,m41t00",
+	"st,m41t11",
 	"microchip,mcp7940x",
 	"microchip,mcp7941x",
 	"pericom,pt7c4338",
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 32aadcbc377f..0ab0c166da83 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -44,6 +44,7 @@ enum ds_type {
 	ds_3231,
 	m41t0,
 	m41t00,
+	m41t11,
 	mcp794xx,
 	rx_8025,
 	rx_8130,
@@ -226,6 +227,11 @@ static const struct chip_desc chips[last_ds_type] = {
 		.irq_handler = rx8130_irq,
 		.rtc_ops = &rx8130_rtc_ops,
 	},
+	[m41t11] = {
+		/* this is battery backed SRAM */
+		.nvram_offset	= 8,
+		.nvram_size	= 56,
+	},
 	[mcp794xx] = {
 		.alarm		= 1,
 		/* this is battery backed SRAM */
@@ -248,6 +254,7 @@ static const struct i2c_device_id ds1307_id[] = {
 	{ "ds3231", ds_3231 },
 	{ "m41t0", m41t0 },
 	{ "m41t00", m41t00 },
+	{ "m41t11", m41t11 },
 	{ "mcp7940x", mcp794xx },
 	{ "mcp7941x", mcp794xx },
 	{ "pt7c4338", ds_1307 },
@@ -304,6 +311,10 @@ static const struct of_device_id ds1307_of_match[] = {
 		.compatible = "st,m41t00",
 		.data = (void *)m41t00
 	},
+	{
+		.compatible = "st,m41t11",
+		.data = (void *)m41t11
+	},
 	{
 		.compatible = "microchip,mcp7940x",
 		.data = (void *)mcp794xx
@@ -346,6 +357,7 @@ static const struct acpi_device_id ds1307_acpi_ids[] = {
 	{ .id = "DS3231", .driver_data = ds_3231 },
 	{ .id = "M41T0", .driver_data = m41t0 },
 	{ .id = "M41T00", .driver_data = m41t00 },
+	{ .id = "M41T11", .driver_data = m41t11 },
 	{ .id = "MCP7940X", .driver_data = mcp794xx },
 	{ .id = "MCP7941X", .driver_data = mcp794xx },
 	{ .id = "PT7C4338", .driver_data = ds_1307 },
@@ -1574,6 +1586,7 @@ static int ds1307_probe(struct i2c_client *client,
 	case ds_1307:
 	case m41t0:
 	case m41t00:
+	case m41t11:
 		/* clock halted?  turn it on, so clock can tick. */
 		if (tmp & DS1307_BIT_CH) {
 			regmap_write(ds1307->regmap, DS1307_REG_SECS, 0);
@@ -1639,6 +1652,7 @@ static int ds1307_probe(struct i2c_client *client,
 	case ds_1340:
 	case m41t0:
 	case m41t00:
+	case m41t11:
 		/*
 		 * NOTE: ignores century bits; fix before deploying
 		 * systems that will run through year 2100.
-- 
2.17.0

  reply	other threads:[~2018-05-08 14:56 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-08 14:56 [PATCH 1/4] rtc: ds1307: fix data pointer to m41t0 Giulio Benetti
2018-05-08 14:56 ` Giulio Benetti [this message]
2018-05-08 14:56 ` [PATCH 3/4] rtc: ds1307: add calibration of_ for mt41txx chips Giulio Benetti
2018-05-08 17:40   ` Rob Herring
2018-05-09 18:33     ` Giulio Benetti
2018-05-08 19:19   ` Alexandre Belloni
2018-05-09 18:31     ` Giulio Benetti
2018-05-08 14:56 ` [PATCH 4/4] rtc: ds1307: add frequency-test property to check calibration on m41txx Giulio Benetti
2018-05-08 17:44   ` Rob Herring
2018-05-09 18:32     ` Giulio Benetti
2018-07-16 21:33 [PATCH v6 3/4] rtc: ds1307: add offset sysfs for mt41txx chips Alexandre Belloni
2018-07-18  8:41 ` [PATCH 2/4] rtc: ds1307: support m41t11 variant Giulio Benetti
2018-07-18  8:41   ` Giulio Benetti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180508145611.49072-2-giulio.benetti@micronovasrl.com \
    --to=giulio.benetti@micronovasrl.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.