Re: [PATCH 4/7] dt-bindings: gnss: add u-blox binding

[Tony Lindgren <tony@atomide.com>]

* Tony Lindgren <tony@atomide.com> [180508 08:47]:
> * Tony Lindgren <tony@atomide.com> [180508 08:22]:
> > * Johan Hovold <johan@kernel.org> [180508 07:00]:
> > > With the negative autosuspend set in both omap drivers probe functions,
> > > this is the expected behaviour. Which I think we must fix.
> > 
> > Yes indeed. I've been using my script for years now and have
> > completely missed the fact that the unused ports are not idled
> > at all on start-up when unused.
> 
> This might be all that's needed, care to try it and if it works
> I'll send out two separate proper patches?
> 
> I'm seeing this now on my bbb after temporarily disabling my
> UART idle init script:
> 
> # rwmem -s32 0x44e004b4           # uart 1 on l4_wkup
> 0x44e004b4 = 0x00000002
> 
> # rwmem -s32 0x44e0006c+0x10      # uart 2 - 5 on l4_per
> 0x44e0006c = 0x00030000
> 0x44e00070 = 0x00030000
> 0x44e00074 = 0x00030000
> 0x44e00078 = 0x00030000
> 
> # rwmem -s32 0x44e00038           # uart 6 on l4_per
> 0x44e00038 = 0x00030000

Hmm I forgot to remove status = "disabled" from the other ports,
still not idling the unused ports with the patch below it seems.

Regards,

Tony

> 8< ----------------------
> diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
> --- a/drivers/tty/serial/8250/8250_omap.c
> +++ b/drivers/tty/serial/8250/8250_omap.c
> @@ -685,8 +685,7 @@ static void omap_8250_shutdown(struct uart_port *port)
>  		serial_out(up, UART_LCR, up->lcr & ~UART_LCR_SBC);
>  	serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
>  
> -	pm_runtime_mark_last_busy(port->dev);
> -	pm_runtime_put_autosuspend(port->dev);
> +	pm_runtime_put_sync(port->dev);
>  	free_irq(port->irq, port);
>  	dev_pm_clear_wake_irq(port->dev);
>  }
> @@ -1265,8 +1264,7 @@ static int omap8250_probe(struct platform_device *pdev)
>  	}
>  	priv->line = ret;
>  	platform_set_drvdata(pdev, priv);
> -	pm_runtime_mark_last_busy(&pdev->dev);
> -	pm_runtime_put_autosuspend(&pdev->dev);
> +	pm_runtime_put_sync(&pdev->dev);
>  	return 0;
>  err:
>  	pm_runtime_dont_use_autosuspend(&pdev->dev);
> diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
> --- a/drivers/tty/serial/omap-serial.c
> +++ b/drivers/tty/serial/omap-serial.c
> @@ -821,8 +821,7 @@ static void serial_omap_shutdown(struct uart_port *port)
>  	if (serial_in(up, UART_LSR) & UART_LSR_DR)
>  		(void) serial_in(up, UART_RX);
>  
> -	pm_runtime_mark_last_busy(up->dev);
> -	pm_runtime_put_autosuspend(up->dev);
> +	pm_runtime_put_sync(up->dev);
>  	free_irq(up->port.irq, up);
>  	dev_pm_clear_wake_irq(up->dev);
>  }
> @@ -1751,8 +1750,7 @@ static int serial_omap_probe(struct platform_device *pdev)
>  	if (ret != 0)
>  		goto err_add_port;
>  
> -	pm_runtime_mark_last_busy(up->dev);
> -	pm_runtime_put_autosuspend(up->dev);
> +	pm_runtime_put_sync(&pdev->dev);
>  	return 0;
>  
>  err_add_port:
> -- 
> 2.17.0