All of lore.kernel.org
 help / color / mirror / Atom feed
From: StanLis <stanislav.lisovskiy@intel.com>
To: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Subject: [PATCH v11 2/2] i915: content-type property for HDMI connector
Date: Tue, 15 May 2018 16:59:28 +0300	[thread overview]
Message-ID: <20180515135928.31092-3-stanislav.lisovskiy@intel.com> (raw)
In-Reply-To: <20180515135928.31092-1-stanislav.lisovskiy@intel.com>

From: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

Added encoding of drm content_type property from drm_connector_state
within AVI infoframe in order to properly handle external HDMI TV
content-type setting.

This requires also manipulationg ITC bit, as stated in
HDMI spec.

v2:
 * Moved helper function which attaches content type property
   to the drm core, as was suggested.
   Removed redundant connector state initialization.

v3:
 * Removed caps in drm_content_type_enum_list.
   After some discussion it turned out that HDMI Spec 1.4
   was wrongly assuming that IT Content(itc) bit doesn't affect
   Content type states, however itc bit needs to be manupulated
   as well. In order to not expose additional property for itc,
   for sake of simplicity it was decided to bind those together
   in same "content type" property.

v4:
 * Added it_content checking in intel_digital_connector_atomic_check.
   Fixed documentation for new content type enum.

v5:
 * Moved patch revision's description to commit messages.

v6:
 * Minor naming fix for the content type enumeration string.

v7:
 * Fix parameter name for documentation and parameter alignment
   in order not to get warning. Added Content Type description to
   new HDMI connector properties section.

v8:
 * Thrown away unneeded numbers from HDMI content-type property
   description. Switch to strings desription instead of plain
   definitions.

v9:
 * Moved away hdmi specific content-type enum from
   drm_connector_state. Content type property should probably not
   be bound to any specific connector interface in
   drm_connector_state.
   Same probably should be done to hdmi_picture_aspect_ration enum
   which is also contained in drm_connector_state. Added special
   helper function to get derive hdmi specific relevant infoframe
   fields.

v10:
 * Added usage description to HDMI properties kernel doc.

v11:
 * Created centralized function for filling HDMI AVI infoframe, based
   on correspondent DRM property value.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
---
 drivers/gpu/drm/i915/intel_atomic.c |  1 +
 drivers/gpu/drm/i915/intel_hdmi.c   | 18 ++++++++++++------
 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index 40285d1b91b7..61ddb5871d8a 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -124,6 +124,7 @@ int intel_digital_connector_atomic_check(struct drm_connector *conn,
 	if (new_conn_state->force_audio != old_conn_state->force_audio ||
 	    new_conn_state->broadcast_rgb != old_conn_state->broadcast_rgb ||
 	    new_conn_state->base.picture_aspect_ratio != old_conn_state->base.picture_aspect_ratio ||
+	    new_conn_state->base.content_type != old_conn_state->base.content_type ||
 	    new_conn_state->base.scaling_mode != old_conn_state->base.scaling_mode)
 		crtc_state->mode_changed = true;
 
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index ee929f31f7db..c12f7a18df11 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -460,8 +460,10 @@ static void intel_write_infoframe(struct drm_encoder *encoder,
 	intel_dig_port->write_infoframe(encoder, crtc_state, frame->any.type, buffer, len);
 }
 
+
 static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
-					 const struct intel_crtc_state *crtc_state)
+					 const struct intel_crtc_state *crtc_state,
+					 const struct drm_connector_state *conn_state)
 {
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
 	const struct drm_display_mode *adjusted_mode =
@@ -491,6 +493,9 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
 					   intel_hdmi->rgb_quant_range_selectable,
 					   is_hdmi2_sink);
 
+	drm_hdmi_avi_infoframe_content_type(&frame.avi,
+					    conn_state);
+
 	/* TODO: handle pixel repetition for YCBCR420 outputs */
 	intel_write_infoframe(encoder, crtc_state, &frame);
 }
@@ -586,7 +591,7 @@ static void g4x_set_infoframes(struct drm_encoder *encoder,
 	I915_WRITE(reg, val);
 	POSTING_READ(reg);
 
-	intel_hdmi_set_avi_infoframe(encoder, crtc_state);
+	intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state);
 	intel_hdmi_set_spd_infoframe(encoder, crtc_state);
 	intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
 }
@@ -727,7 +732,7 @@ static void ibx_set_infoframes(struct drm_encoder *encoder,
 	I915_WRITE(reg, val);
 	POSTING_READ(reg);
 
-	intel_hdmi_set_avi_infoframe(encoder, crtc_state);
+	intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state);
 	intel_hdmi_set_spd_infoframe(encoder, crtc_state);
 	intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
 }
@@ -770,7 +775,7 @@ static void cpt_set_infoframes(struct drm_encoder *encoder,
 	I915_WRITE(reg, val);
 	POSTING_READ(reg);
 
-	intel_hdmi_set_avi_infoframe(encoder, crtc_state);
+	intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state);
 	intel_hdmi_set_spd_infoframe(encoder, crtc_state);
 	intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
 }
@@ -823,7 +828,7 @@ static void vlv_set_infoframes(struct drm_encoder *encoder,
 	I915_WRITE(reg, val);
 	POSTING_READ(reg);
 
-	intel_hdmi_set_avi_infoframe(encoder, crtc_state);
+	intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state);
 	intel_hdmi_set_spd_infoframe(encoder, crtc_state);
 	intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
 }
@@ -856,7 +861,7 @@ static void hsw_set_infoframes(struct drm_encoder *encoder,
 	I915_WRITE(reg, val);
 	POSTING_READ(reg);
 
-	intel_hdmi_set_avi_infoframe(encoder, crtc_state);
+	intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state);
 	intel_hdmi_set_spd_infoframe(encoder, crtc_state);
 	intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
 }
@@ -2065,6 +2070,7 @@ intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *c
 	intel_attach_force_audio_property(connector);
 	intel_attach_broadcast_rgb_property(connector);
 	intel_attach_aspect_ratio_property(connector);
+	drm_connector_attach_content_type_property(connector);
 	connector->state->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE;
 }
 
-- 
2.17.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2018-05-15 13:59 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-15 13:59 [PATCH v11 0/2] Enabling content-type setting for HDMI displays StanLis
2018-05-15 13:59 ` [PATCH v11 1/2] drm: content-type property for HDMI connector StanLis
2018-05-15 13:59 ` StanLis [this message]
2018-05-15 14:12 ` ✗ Fi.CI.CHECKPATCH: warning for Enabling content-type setting for HDMI displays. (rev10) Patchwork
2018-05-15 14:32 ` ✓ Fi.CI.BAT: success " Patchwork
2018-05-15 23:55 ` ✓ Fi.CI.IGT: " Patchwork
2018-05-17  7:21 ` [PATCH v11 0/2] Enabling content-type setting for HDMI displays Lisovskiy, Stanislav
2018-05-17 16:01 ` Ville Syrjälä

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180515135928.31092-3-stanislav.lisovskiy@intel.com \
    --to=stanislav.lisovskiy@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.