All of lore.kernel.org
 help / color / mirror / Atom feed
From: Giulio Benetti <giulio.benetti@micronovasrl.com>
To: a.zummo@towertech.it, alexandre.belloni@bootlin.com
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
	linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Giulio Benetti <giulio.benetti@micronovasrl.com>
Subject: [PATCH v5 4/4] rtc: ds1307: add frequency_test_enable sysfs attribute to check tick on m41txx
Date: Wed, 16 May 2018 12:32:51 +0200	[thread overview]
Message-ID: <20180516103251.74707-4-giulio.benetti@micronovasrl.com> (raw)
In-Reply-To: <20180516103251.74707-1-giulio.benetti@micronovasrl.com>

On m41txx you can enable open-drain OUT pin to check if offset is ok.
Enabling OUT pin with frequency_test_enable attribute, OUT pin will tick
512 times faster than 1s tick base.

Enable or Disable FT bit on CONTROL register if freq_test is 1 or 0.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
---
V3 => V4:
* change attribute from freq_test to frequency_test_enable
* use regmap_update_bits instead of regmap_write
V4 => V5:
* update commit log

 drivers/rtc/rtc-ds1307.c | 99 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 2797d01bfa1d..de98ddc39515 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -1053,6 +1053,99 @@ static int m41txx_rtc_set_offset(struct device *dev, long offset)
 				  ctrl_reg);
 }
 
+static ssize_t frequency_test_enable_store(struct device *dev,
+					   struct device_attribute *attr,
+					   const char *buf, size_t count)
+{
+	struct ds1307 *ds1307 = dev_get_drvdata(dev);
+	unsigned long freq_test = 0;
+	int retval;
+
+	retval = kstrtoul(buf, 10, &freq_test);
+	if ((retval < 0) || (retval > 1)) {
+		dev_err(dev, "Failed to store RTC Frequency Test attribute\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(ds1307->regmap, M41TXX_REG_CONTROL, M41TXX_BIT_FT,
+			   freq_test ? M41TXX_BIT_FT : 0);
+
+	return retval ? retval : count;
+}
+
+static ssize_t frequency_test_enable_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct ds1307 *ds1307 = dev_get_drvdata(dev);
+	int freq_test_en = 0;
+	unsigned int ctrl_reg;
+
+	regmap_read(ds1307->regmap, M41TXX_REG_CONTROL, &ctrl_reg);
+
+	if (ctrl_reg & M41TXX_BIT_FT)
+		freq_test_en = true;
+	else
+		freq_test_en = false;
+
+	return sprintf(buf, "%d\n", freq_test_en);
+}
+
+static DEVICE_ATTR_RW(frequency_test_enable);
+
+static struct attribute *rtc_freq_test_attrs[] = {
+	&dev_attr_frequency_test_enable.attr,
+	NULL,
+};
+
+static const struct attribute_group rtc_freq_test_attr_group = {
+	.attrs		= rtc_freq_test_attrs,
+};
+
+static void rtc_calib_remove_sysfs_group(void *_dev)
+{
+	struct device *dev = _dev;
+
+	sysfs_remove_group(&dev->kobj, &rtc_freq_test_attr_group);
+}
+
+static int ds1307_add_frequency_test(struct ds1307 *ds1307)
+{
+	int err = 0;
+
+	switch (ds1307->type) {
+	case m41t0:
+	case m41t00:
+	case m41t11:
+		/* Export sysfs entries */
+		err = sysfs_create_group(&(ds1307->dev)->kobj,
+					 &rtc_freq_test_attr_group);
+		if (err) {
+			dev_err(ds1307->dev,
+				"Failed to create sysfs group: %d\n",
+				err);
+			return err;
+		}
+
+		err = devm_add_action_or_reset(ds1307->dev,
+					       rtc_calib_remove_sysfs_group,
+					       ds1307->dev);
+		if (err) {
+			dev_err(ds1307->dev,
+				"Failed to add sysfs cleanup action: %d\n",
+				err);
+			sysfs_remove_group(&(ds1307->dev)->kobj,
+					   &rtc_freq_test_attr_group);
+			return err;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return err;
+}
+
 /*----------------------------------------------------------------------*/
 
 static int ds1307_nvram_read(void *priv, unsigned int offset, void *val,
@@ -1794,6 +1887,12 @@ static int ds1307_probe(struct i2c_client *client,
 	if (err)
 		return err;
 
+	err = ds1307_add_frequency_test(ds1307);
+	if (err) {
+		rtc_device_unregister(ds1307->rtc);
+		return err;
+	}
+
 	if (chip->nvram_size) {
 		struct nvmem_config nvmem_cfg = {
 			.name = "ds1307_nvram",
-- 
2.17.0

  parent reply	other threads:[~2018-05-16 10:33 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-16 10:32 [PATCH v5 1/4] rtc: ds1307: fix data pointer to m41t0 Giulio Benetti
2018-05-16 10:32 ` [PATCH v5 2/4] rtc: ds1307: support m41t11 variant Giulio Benetti
2018-05-16 10:32 ` [PATCH v5 3/4] rtc: ds1307: add offset sysfs for mt41txx chips Giulio Benetti
2018-05-16 10:32 ` Giulio Benetti [this message]
2018-05-16 20:22   ` [PATCH v5 4/4] rtc: ds1307: add frequency_test_enable sysfs attribute to check tick on m41txx Andy Shevchenko
2018-05-16 21:02     ` Giulio Benetti
2018-05-16 21:10       ` Alexandre Belloni
2018-05-16 21:15         ` Giulio Benetti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180516103251.74707-4-giulio.benetti@micronovasrl.com \
    --to=giulio.benetti@micronovasrl.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.