From: Petr Vorel <pvorel@suse.cz>
To: ltp@lists.linux.it
Subject: [LTP] [PATCH 2/2] network/route: Rewrite route-change-gw into new API
Date: Thu, 17 May 2018 12:35:27 +0200 [thread overview]
Message-ID: <20180517103527.23542-2-pvorel@suse.cz> (raw)
In-Reply-To: <20180517103527.23542-1-pvorel@suse.cz>
Drop route command (use just ip command), simplify
Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
runtest/net_stress.route | 4 +-
testcases/network/stress/route/00_Descriptions.txt | 18 +-
testcases/network/stress/route/route-change-gw | 53 ++++
testcases/network/stress/route/route4-change-gw | 292 --------------------
testcases/network/stress/route/route6-change-gw | 293 ---------------------
5 files changed, 58 insertions(+), 602 deletions(-)
create mode 100755 testcases/network/stress/route/route-change-gw
delete mode 100644 testcases/network/stress/route/route4-change-gw
delete mode 100644 testcases/network/stress/route/route6-change-gw
diff --git a/runtest/net_stress.route b/runtest/net_stress.route
index b6ea11c2e..0cc033e1a 100644
--- a/runtest/net_stress.route
+++ b/runtest/net_stress.route
@@ -3,13 +3,13 @@
#
route4-change-dst route-change-dst
-route4-change-gw route4-change-gw
+route4-change-gw route-change-gw
route4-change-if route4-change-if
route4-redirect route4-redirect
route4-rmmod route4-rmmod
route6-change-dst route-change-dst -6
-route6-change-gw route6-change-gw
+route6-change-gw route-change-gw -6
route6-change-if route6-change-if
route6-redirect route6-redirect
route6-rmmod route6-rmmod
diff --git a/testcases/network/stress/route/00_Descriptions.txt b/testcases/network/stress/route/00_Descriptions.txt
index e9e4d7961..41b5055d8 100644
--- a/testcases/network/stress/route/00_Descriptions.txt
+++ b/testcases/network/stress/route/00_Descriptions.txt
@@ -2,14 +2,10 @@ route-change-dst
Verify the IPv4/IPv6 is not broken when ip command changes route
destination many times
+route-change-dst
+ Verify the IPv4/IPv6 is not broken when ip command changes route
+ gateway many times
-route4-change-gw01
- Verify the kernel is not crashed when the gateway of an IPv4 route is
- changed frequently by route command
-
-route4-change-gw02
- Verify the kernel is not crashed when the gateway of an IPv4 route is
- changed frequently by ip command
route4-change-if01
Verify the kernel is not crashed when the interface of an IPv4 route is
@@ -32,14 +28,6 @@ route4-rmmod02
then it is deleted by the removing network driver
-route6-change-gw01
- Verify the kernel is not crashed when the gateway of an IPv6 route is
- changed frequently by route command
-
-route6-change-gw02
- Verify the kernel is not crashed when the gateway of an IPv6 route is
- changed frequently by ip command
-
route6-change-if01
Verify the kernel is not crashed when the interface of an IPv6 route is
changed frequently by route command
diff --git a/testcases/network/stress/route/route-change-gw b/testcases/network/stress/route/route-change-gw
new file mode 100755
index 000000000..e43bec693
--- /dev/null
+++ b/testcases/network/stress/route/route-change-gw
@@ -0,0 +1,53 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
+# Copyright (c) International Business Machines Corp., 2005
+#
+# Author: Mitsuru Chinen <mitch@jp.ibm.com>
+
+TST_TESTFUNC="do_test"
+TST_SETUP="netstress_setup"
+TST_CLEANUP="restore_ipaddr"
+TST_NEEDS_CMDS="ip"
+
+. tst_net_stress.sh
+
+do_test()
+{
+ local iface=$(tst_iface)
+ local cnt=1
+ local addr new_gw
+
+ local udp_size=1472
+ local mask=24
+ if [ "$TST_IPV6" ]; then
+ udp_size=1452
+ mask=64
+ fi
+
+ local rt="$(tst_ipaddr_un 0)/$mask"
+
+ tst_res TINFO "change IPv$ipver route gateway $NS_TIMES times"
+
+ while [ $cnt -le $NS_TIMES ]; do
+ addr="$(tst_ipaddr_un $cnt 1)"
+ new_gw="$(tst_ipaddr_un $cnt 2)"
+
+ ROD ip addr add $addr/$mask dev $iface
+ ROD ip route add $rt dev $iface via $new_gw
+ ROD ip neigh replace $addr lladdr $(tst_hwaddr rhost) nud permanent dev $iface
+
+ # Load the route with one UDP datagram
+ ROD ns-udpsender -f $ipver -D $addr -p $cnt -o -s $udp_size
+
+ ROD ip neigh del $addr lladdr $(tst_hwaddr rhost) dev $iface
+ ROD ip route del $rt dev $iface via $new_gw
+
+ cnt=$(($cnt + 1))
+ done
+
+ tst_res TPASS "test is finished correctly"
+}
+
+tst_run
diff --git a/testcases/network/stress/route/route4-change-gw b/testcases/network/stress/route/route4-change-gw
deleted file mode 100644
index 791f98cc7..000000000
--- a/testcases/network/stress/route/route4-change-gw
+++ /dev/null
@@ -1,292 +0,0 @@
-#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (c) International Business Machines Corp., 2006 ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-## ##
-################################################################################
-#
-# File:
-# route4-change-gw
-#
-# Description:
-# Verify the kernel is not crashed when the gateway of an IPv4 route is
-# changed frequently
-# test01 - by route command
-# test02 - by ip command
-#
-# Setup:
-# See testcases/network/stress/README
-#
-# Author:
-# Mitsuru Chinen <mitch@jp.ibm.com>
-#
-# History:
-# Mar 16 2006 - Created (Mitsuru Chinen)
-#
-#-----------------------------------------------------------------------
-# Uncomment line below for debug output.
-#trace_logic=${trace_logic:-"set -x"}
-$trace_logic
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../ ; pwd)`}
-export LTPROOT
-
-# Total number of the test case
-TST_TOTAL=2
-export TST_TOTAL
-
-# Default of the test case ID and the test case count
-TCID=route4-change-gw
-TST_COUNT=0
-export TCID
-export TST_COUNT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# The number of times where route is changed
-NS_TIMES=${NS_TIMES:-10000}
-
-# The number of the test link where tests run
-LINK_NUM=${LINK_NUM:-0}
-
-# Network portion of the IPv4 address
-IPV4_NETWORK=${IPV4_NETWORK:-"10.0.0"}
-
-# Netmask of for the tested network
-IPV4_NETMASK_NUM=24
-
-# Broadcast address of the tested network
-IPV4_BROADCAST=${IPV4_NETWORK}.255
-
-# Host portion of the IPv4 address
-LHOST_IPV4_HOST=${LHOST_IPV4_HOST:-"1"} # src
-RHOST_IPV4_HOST_TOP="10" # gateway
-RHOST_IPV4_HOST_LAST=19
-
-# The destination network
-DST_NETWORK="10.10.0" # destination network would be 10.10.0.0/24
-DST_HOST="5"
-DST_PORT="7"
-
-
-#-----------------------------------------------------------------------
-#
-# NAME:
-# do_setup
-#
-# DESCRIPTION:
-# Make a IPv4 connectivity
-#
-# SET VALUES:
-# rhost_ipv4addr - IPv4 Address of the remote host
-# lhost_ifname - Interface name of the local host
-# rhost_ifname - Interface name of the remote host
-#
-#-----------------------------------------------------------------------
-do_setup()
-{
- TCID=route4-change-gw
- TST_COUNT=0
-
- # Get the Interface name of local host
- lhost_ifname=`get_ifname lhost ${LINK_NUM}`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- # Get the Interface name of remote host
- rhost_ifname=`get_ifname rhost ${LINK_NUM}`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Initialize the interfaces of the remote host
- initialize_if rhost ${LINK_NUM}
-
- # Set IPv4 address to the interface of the remote host
- rhost_part=$RHOST_IPV4_HOST_TOP
- while [ $rhost_part -le $RHOST_IPV4_HOST_LAST ]; do
- ret=`$LTP_RSH $RHOST '( PATH=/sbin:/usr/sbin:$PATH ; ip addr add '${IPV4_NETWORK}.${rhost_part}/${IPV4_NETMASK_NUM}' broadcast '${IPV4_NETWORK}'.255 dev '$rhost_ifname' ) > /dev/null ; echo $?'`
- if [ $ret -ne 0 ]; then
- tst_resm TBROK "Failed to assign IP address to the interface at the remote host"
- exit $TST_TOTAL
- fi
- rhost_part=`expr $rhost_part + 1`
- done
-}
-
-
-#-----------------------------------------------------------------------
-#
-# NAME:
-# do_cleanup
-#
-# DESCRIPTION:
-# Recover the tested interfaces
-#
-#-----------------------------------------------------------------------
-do_cleanup()
-{
- killall -SIGHUP ns-udpsender >/dev/null 2>&1
-
- # Initialize the interfaces
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
-}
-
-
-#-----------------------------------------------------------------------
-#
-# FUNCTION:
-# test_body
-#
-# DESCRIPTION:
-# main code of the test
-#
-# Arguments:
-# $1: define the test type
-# 1 - route command case
-# 2 - ip command case
-#
-#-----------------------------------------------------------------------
-test_body()
-{
- test_type=$1
-
- TCID=route4-change-gw0${test_type}
- TST_COUNT=$test_type
-
- case $test_type in
- 1)
- test_command="route"
- ;;
- 2)
- test_command="ip"
- ;;
- *)
- tst_resm TBROK "unspecified case"
- return 1
- ;;
- esac
-
- tst_resm TINFO "Verify the kernel is not crashed when the gateway of an IPv4 route is changed frequently by $test_command command in $NS_TIMES times"
-
- # Initialize the interface of the local host
- initialize_if lhost ${LINK_NUM}
-
- # Assign IPv4 address to the interface of the local host
- set_ipv4addr lhost ${LINK_NUM} ${IPV4_NETWORK} ${LHOST_IPV4_HOST}
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to assign an IPv4 address at the local host"
- return 1
- fi
-
- # Check the connectivity to the gateway
- rhost_part=$RHOST_IPV4_HOST_TOP
- check_icmpv4_connectivity $lhost_ifname ${IPV4_NETWORK}.${rhost_part}
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Test Link $LINK_NUM is somthing wrong."
- return 1
- fi
-
- # Set the variables regarding the destination host
- dst_addr=${DST_NETWORK}.${DST_HOST}
- dst_network=${DST_NETWORK}.0
-
- # Set the first route
- case $test_type in
- 1)
- route add -net $dst_network netmask 255.255.255.0 gw ${IPV4_NETWORK}.${rhost_part} dev $lhost_ifname
- ;;
- 2)
- ip route add ${dst_network}/24 via ${IPV4_NETWORK}.${rhost_part} dev $lhost_ifname
- ;;
- esac
-
- # Load the route with UDP traffic
- ns-udpsender -f 4 -D $dst_addr -p $DST_PORT -b -s 1472
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to run a UDP datagram sender"
- return 1
- fi
-
- # Loop for changing the route
- cnt=0
- while [ $cnt -lt $NS_TIMES ]; do
- pre_rhost_part=$rhost_part
- rhost_part=`expr $rhost_part + 1`
- if [ $rhost_part -gt $RHOST_IPV4_HOST_LAST ]; then
- rhost_part=$RHOST_IPV4_HOST_TOP
- fi
-
- case $test_type in
- 1)
- route add -net $dst_network netmask 255.255.255.0 gw ${IPV4_NETWORK}.${rhost_part} dev $lhost_ifname
- route del -net $dst_network netmask 255.255.255.0 gw ${IPV4_NETWORK}.${pre_rhost_part} dev $lhost_ifname
- ;;
- 2)
- ip route change ${dst_network}/24 via ${IPV4_NETWORK}.${rhost_part} dev $lhost_ifname
- ;;
- esac
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to change the gateway to ${IPV4_NETWORK}.${rhost_part}"
- return 1
- fi
-
- # Rerun if udp datagram sender is dead
- ps auxw | fgrep -v grep | grep ns-udpsender > /dev/null
- if [ $? -ne 0 ]; then
- ns-udpsender -f 4 -D $dst_addr -p $DST_PORT -b -s 1472
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to run a UDP datagram sender"
- return 1
- fi
- fi
-
- cnt=`expr $cnt + 1`
- done
-
- # Kill the udp datagram sender
- killall -SIGHUP ns-udpsender >/dev/null 2>&1
-
- tst_resm TPASS "Test is finished correctly."
- return 0
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Main
-#
-# Exit Value:
-# The number of the failure
-#
-#-----------------------------------------------------------------------
-
-RC=0
-do_setup
-test_body 1 || RC=`expr $RC + 1` # Case of route command
-test_body 2 || RC=`expr $RC + 1` # Case of ip command
-do_cleanup
-
-exit $RC
diff --git a/testcases/network/stress/route/route6-change-gw b/testcases/network/stress/route/route6-change-gw
deleted file mode 100644
index 96fd7ee66..000000000
--- a/testcases/network/stress/route/route6-change-gw
+++ /dev/null
@@ -1,293 +0,0 @@
-#!/bin/sh
-################################################################################
-## ##
-## Copyright (c) International Business Machines Corp., 2006 ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-## ##
-################################################################################
-#
-# File:
-# route6-change-gw
-#
-# Description:
-# Verify the kernel is not crashed when the gateway of an IPv6 route is
-# changed frequently
-# test01 - by route command
-# test02 - by ip command
-#
-# Setup:
-# See testcases/network/stress/README
-#
-# Author:
-# Mitsuru Chinen <mitch@jp.ibm.com>
-#
-# History:
-# Mar 16 2006 - Created (Mitsuru Chinen)
-#
-#-----------------------------------------------------------------------
-# Uncomment line below for debug output.
-#trace_logic=${trace_logic:-"set -x"}
-$trace_logic
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../ ; pwd)`}
-export LTPROOT
-
-# Total number of the test case
-TST_TOTAL=2
-export TST_TOTAL
-
-# Default of the test case ID and the test case count
-TCID=route6-change-gw
-TST_COUNT=0
-export TCID
-export TST_COUNT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# The number of times where route is changed
-NS_TIMES=${NS_TIMES:-10000}
-
-# The number of the test link where tests run
-LINK_NUM=${LINK_NUM:-0}
-
-# Network portion of the IPv6 address
-IPV6_NETWORK="fec0:1:1:1"
-
-# Netmask of for the tested network
-IPV6_NETMASK_NUM=64
-
-# Host portion of the IPv6 address
-LHOST_IPV6_HOST=":2" # src
-RHOST_IPV6_HOST_TOP="10" # gateway
-RHOST_IPV6_HOST_LAST="19"
-
-# The destination network
-DST_NETWORK="fd00:100:1:1" # dest network would be fd00:100:1:1:::/64
-DST_HOST="5"
-DST_PORT="7"
-
-
-#-----------------------------------------------------------------------
-#
-# NAME:
-# do_setup
-#
-# DESCRIPTION:
-# Make a IPv6 connectivity
-#
-# SET VALUES:
-# rhost_ipv6addr - IPv6 Address of the remote host
-# lhost_ifname - Interface name of the local host
-# rhost_ifname - Interface name of the remote host
-#
-#-----------------------------------------------------------------------
-do_setup()
-{
- TCID=route6-change-gw
- TST_COUNT=0
-
- # Get the Interface name of local host
- lhost_ifname=`get_ifname lhost ${LINK_NUM}`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- # Get the Interface name of remote host
- rhost_ifname=`get_ifname rhost ${LINK_NUM}`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Initialize the interfaces of the remote host
- initialize_if rhost ${LINK_NUM}
-
- # Set IPv6 address to the interface of the remote host
- rhost_part=$RHOST_IPV6_HOST_TOP
- rhost_part_hex=`printf "%x" $rhost_part`
- while [ $rhost_part -le $RHOST_IPV6_HOST_LAST ]; do
- rhost_part_hex=":`printf "%x" $rhost_part`"
- add_ipv6addr rhost ${LINK_NUM} ${IPV6_NETWORK} ${rhost_part_hex}
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to assign IP address to the interface at the remote host"
- exit $TST_TOTAL
- fi
- rhost_part=`expr $rhost_part + 1`
- done
-}
-
-
-#-----------------------------------------------------------------------
-#
-# NAME:
-# do_cleanup
-#
-# DESCRIPTION:
-# Recover the tested interfaces
-#
-#-----------------------------------------------------------------------
-do_cleanup()
-{
- killall -SIGHUP ns-udpsender >/dev/null 2>&1
-
- # Initialize the interfaces
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
-}
-
-
-#-----------------------------------------------------------------------
-#
-# FUNCTION:
-# test_body
-#
-# DESCRIPTION:
-# main code of the test
-#
-# Arguments:
-# $1: define the test type
-# 1 - route command case
-# 2 - ip command case
-#
-#-----------------------------------------------------------------------
-test_body()
-{
- test_type=$1
-
- TCID=route6-change-gw0${test_type}
- TST_COUNT=$test_type
-
- case $test_type in
- 1)
- test_command="route"
- ;;
- 2)
- test_command="ip"
- ;;
- *)
- tst_resm TBROK "unspecified case"
- return 1
- ;;
- esac
-
- tst_resm TINFO "Verify the kernel is not crashed when the gateway of an IPv6 route is changed frequently by $test_command command in $NS_TIMES times"
-
- # Initialize the interface of the local host
- initialize_if lhost ${LINK_NUM}
-
- # Assign IPv6 address to the interface of the local host
- add_ipv6addr lhost ${LINK_NUM} ${IPV6_NETWORK} ${LHOST_IPV6_HOST}
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to assign an IPv6 address at the local host"
- return 1
- fi
-
- # Check the connectivity to the gateway
- rhost_part=$RHOST_IPV6_HOST_TOP
- rhost_part_hex=":`printf "%x" $rhost_part`"
- check_icmpv6_connectivity $lhost_ifname ${IPV6_NETWORK}:${rhost_part_hex}
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Test Link $LINK_NUM is somthing wrong."
- return 1
- fi
-
- # Set the variables regarding the destination host
- dst_addr=${DST_NETWORK}::${DST_HOST}
- dst_network=${DST_NETWORK}::
-
- # Set the first route
- case $test_type in
- 1)
- route -A inet6 add ${dst_network}/64 gw ${IPV6_NETWORK}:${rhost_part_hex} dev $lhost_ifname
- ;;
- 2)
- ip -f inet6 route add ${dst_network}/64 via ${IPV6_NETWORK}:${rhost_part_hex} dev $lhost_ifname
- ;;
- esac
-
- # Load the route with UDP traffic
- ns-udpsender -f 6 -D $dst_addr -p $DST_PORT -b -s 1452
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to run a UDP datagram sender"
- return 1
- fi
-
- # Loop for changing the route
- cnt=0
- while [ $cnt -lt $NS_TIMES ]; do
- pre_rhost_part_hex=$rhost_part_hex
- rhost_part=`expr $rhost_part + 1`
- if [ $rhost_part -gt $RHOST_IPV6_HOST_LAST ]; then
- rhost_part=$RHOST_IPV6_HOST_TOP
- fi
- rhost_part_hex=":`printf "%x" $rhost_part`"
-
- case $test_type in
- 1)
- route -A inet6 add ${dst_network}/64 gw ${IPV6_NETWORK}:${rhost_part_hex} dev $lhost_ifname
- route -A inet6 del ${dst_network}/64 gw ${IPV6_NETWORK}:${pre_rhost_part_hex} dev $lhost_ifname
- ;;
- 2)
- ip -f inet6 route add ${dst_network}/64 via ${IPV6_NETWORK}:${rhost_part_hex} dev $lhost_ifname
- ip -f inet6 route del ${dst_network}/64 via ${IPV6_NETWORK}:${pre_rhost_part_hex} dev $lhost_ifname
- ;;
- esac
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to change the gateway to ${IPV6_NETWORK}.${rhost_part}"
- return 1
- fi
-
- # Rerun if udp datagram sender is dead
- ps auxw | fgrep -v grep | grep ns-udpsender > /dev/null
- if [ $? -ne 0 ]; then
- ns-udpsender -f 4 -D $dst_addr -p $DST_PORT -o -s 1472
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to run a UDP datagram sender"
- return 1
- fi
- fi
-
- cnt=`expr $cnt + 1`
- done
-
- # Kill the udp datagram sender
- killall -SIGHUP ns-udpsender >/dev/null 2>&1
-
- tst_resm TPASS "Test is finished correctly."
- return 0
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Main
-#
-# Exit Value:
-# The number of the failure
-#
-#-----------------------------------------------------------------------
-
-RC=0
-do_setup
-test_body 1 || RC=`expr $RC + 1` # Case of route command
-test_body 2 || RC=`expr $RC + 1` # Case of ip command
-do_cleanup
-
-exit $RC
--
2.16.3
next prev parent reply other threads:[~2018-05-17 10:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-17 10:35 [LTP] [PATCH 1/2] network/route: Rewrite route-change-dst into new API Petr Vorel
2018-05-17 10:35 ` Petr Vorel [this message]
2018-05-18 9:53 ` [LTP] [PATCH 2/2] network/route: Rewrite route-change-gw " Alexey Kodanev
2018-05-18 11:01 ` Petr Vorel
2018-06-25 14:01 ` Petr Vorel
2018-06-27 11:47 ` Alexey Kodanev
2018-07-04 15:35 ` Petr Vorel
2018-07-04 17:06 ` Alexey Kodanev
2018-05-18 9:36 ` [LTP] [PATCH 1/2] network/route: Rewrite route-change-dst " Alexey Kodanev
2018-05-18 9:40 ` Petr Vorel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180517103527.23542-2-pvorel@suse.cz \
--to=pvorel@suse.cz \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.