All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PULL] Please pull u-boot-imx
       [not found] <c8534adc-a94d-44b5-b702-6888788a33a4@email.android.com>
@ 2018-05-17 17:08 ` Stefano Babic
  2018-05-17 20:15   ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-05-17 17:08 UTC (permalink / raw)
  To: u-boot

On 17/05/2018 18:33, Lukasz Majewski wrote:
> Hi Stefano, Tom,
> 

Tom was not in CC, added

> On 17 May 2018 17:50, Stefano Babic <sbabic@denx.de> wrote:
> 
>     Hi Tom,
> 
>     please pull from u-boot-imx, thanks !
> 
>     The following changes since commit
>     f2d0f5e7ab3b8a7b4bf6e2ac499b4867c701d52d:
> 
>       ARM: re-enable MVGBE for edminiv2 (2018-05-16 11:38:08 -0400)
> 
>     are available in the git repository at:
> 
>       git://www.denx.de/git/u-boot-imx.git master
> 
>     for you to fetch changes up to 2f5988533d5c447d7bda79b0d9719f84db9e1835:
> 
>       imx6: sabrelite: update defconfig to use distro defaults (2018-05-17
>     17:47:17 +0200)
> 
>     ----------------------------------------------------------------
>     Guillaume GARDET (2):
>           imx6: Convert sabrelite and nitrogen6x boards to distro boot
>     support
>           imx6: sabrelite: update defconfig to use distro defaults
> 
>     Ian Ray (6):
>           board: ge: bx50v3: add winbond SPI NOR support
>           board: ge: bx50v3: rename detect_baseboard function
>           board: ge: bx50v3: fix display support for b{46}50v3
>           board: ge: bx50v3: use VPD instead of compile-time checks
>           board: ge: bx50v3: configure video arguments using VPD
>           board: ge: bx50v3: remove redundant targets
> 
>     Lukasz Majewski (8):
>           dts: imx53: Add gpio and i2c nodes to imx53.dtsi file
>           dts: pinctrl: Provide IMX_PAD_SION definition for imx53 pinctrl
> 
> 
> Two above patches are correct.
> 
>           pmic: fsl: Provide some more definitions for MC34708 PMIC
>           pmic: fsl: Define number of bytes sent at once by MC34708 PMIC
>           pmic: dm: Provide *trans_len() callback for pmic-uclass
>           pmic: dm: Rewrite pmic_reg_{read|write} and pmic_clrsetbits to
>     support transmissions larger than 1 byte
>           pmic: dm: Add support for MC34708 for PMIC DM
>           arm: imx53: Add support for imx53 boards from K+P
> 
> 
> Stefano, Tom please drop above patches as they were superseded by v2 and
> v3 (after discussion with Simon).

I have just added the pmic patches due to the dependency in "arm: imx53:
Add support for imx53 boards from K+P", and I have not seen any change
request in them. I drop the series, Tom please wait, I will send a new
PR after.

> 
> IMHO v3 is eligible for pulling:
> https://patchwork.ozlabs.org/patch/913670/
> 

Should they flow into Jaehoon's tree instead of u-boot-imx ?

Best regards,
Stefano

> BR,
> Łukasz Majewski
> 
>     Magnus Lilja (2):
>           mx31pdk: Convert CONFIG_MX31 flag to use Kconfig.
>           mx31: Convert MX31_HCLK_FREQ and MX31_CLK32 to Kconfig.
> 
>     Nandor Han (2):
>           board: ge: bx50v3: unify two switch statements
>           board: ge: bx50v3: detect the monitor type by reading VPD earlier
> 
>     Peter Robinson (4):
>           mx6 common: remove dangling comment
>           mx7: remove empty ifndef statement
>           mx6: Select CONFIG_MP with MX6_SMP
>           mx6: remove duplicated BOUNCE_BUFFER defines
> 
>     Sebastian Reichel (1):
>           ge: ppd: move CONFIG_ENV_IS_IN_MMC to defconfig
> 
>     arch/arm/Kconfig                                     |  14 +++----
>     arch/arm/dts/imx53-kp.dts                            | 135
>     ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>     arch/arm/dts/imx53-pinfunc.h                         |   1 +
>     arch/arm/dts/imx53.dtsi                              | 101
>     +++++++++++++++++++++++++++++++++++++++++++++++-
>     arch/arm/include/asm/arch-mx31/clock.h               |   8 ----
>     arch/arm/mach-imx/mx3/Kconfig                        |  34
>     +++++++++++++++++
>     arch/arm/mach-imx/mx5/Kconfig                        |  12 ++++++
>     arch/arm/mach-imx/mx6/Kconfig                        |  15 ++------
>     board/ge/bx50v3/Kconfig                              |   2 +-
>     board/ge/bx50v3/bx50v3.c                             |  71
>     ++++++++++++++++++++++------------
>     board/k+p/kp_imx53/Kconfig                           |  15 ++++++++
>     board/k+p/kp_imx53/MAINTAINERS                       |   6 +++
>     board/k+p/kp_imx53/Makefile                          |   8 ++++
>     board/k+p/kp_imx53/kp_id_rev.c                       | 121
>     ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>     board/k+p/kp_imx53/kp_id_rev.h                       |  28
>     ++++++++++++++
>     board/k+p/kp_imx53/kp_imx53.c                        | 212
>     +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>     configs/ge_b650v3_defconfig                          |  43
>     ---------------------
>     configs/ge_b850v3_defconfig                          |  43
>     ---------------------
>     configs/{ge_b450v3_defconfig => ge_bx50v3_defconfig} |   4 +-
>     configs/kp_imx53_defconfig                           |  40
>     +++++++++++++++++++
>     configs/mx31pdk_defconfig                            |   3 +-
>     configs/mx53ppd_defconfig                            |   1 +
>     configs/mx6qsabrelite_defconfig                      |  15 +++-----
>     drivers/power/pmic/Kconfig                           |   7 ++++
>     drivers/power/pmic/Makefile                          |   1 +
>     drivers/power/pmic/mc34708.c                         | 103
>     +++++++++++++++++++++++++++++++++++++++++++++++++
>     drivers/power/pmic/pmic-uclass.c                     |  48
>     +++++++++++++++++------
>     include/configs/advantech_dms-ba16.h                 |   1 -
>     include/configs/apalis_imx6.h                        |   1 -
>     include/configs/colibri_imx6.h                       |   1 -
>     include/configs/dh_imx6.h                            |   1 -
>     include/configs/ge_bx50v3.h                          |  17 +--------
>     include/configs/kp_imx53.h                           | 113
>     ++++++++++++++++++++++++++++++++++++++++++++++++++++++
>     include/configs/kp_imx6q_tpc.h                       |   2 -
>     include/configs/mx31pdk.h                            |   2 -
>     include/configs/mx53ppd.h                            |   1 -
>     include/configs/mx6_common.h                         |   3 --
>     include/configs/mx7_common.h                         |   3 --
>     include/configs/nitrogen6x.h                         | 179
>     +++++++++++++++++++++----------------------------------------------------------------
>     include/fsl_pmic.h                                   |  41
>     ++++++++++++++++++++
>     include/power/pmic.h                                 |   2 +
>     41 files changed, 1126 insertions(+), 332 deletions(-)
>     create mode 100644 arch/arm/dts/imx53-kp.dts
>     create mode 100644 arch/arm/mach-imx/mx3/Kconfig
>     create mode 100644 board/k+p/kp_imx53/Kconfig
>     create mode 100644 board/k+p/kp_imx53/MAINTAINERS
>     create mode 100644 board/k+p/kp_imx53/Makefile
>     create mode 100644 board/k+p/kp_imx53/kp_id_rev.c
>     create mode 100644 board/k+p/kp_imx53/kp_id_rev.h
>     create mode 100644 board/k+p/kp_imx53/kp_imx53.c
>     delete mode 100644 configs/ge_b650v3_defconfig
>     delete mode 100644 configs/ge_b850v3_defconfig
>     rename configs/{ge_b450v3_defconfig => ge_bx50v3_defconfig} (93%)
>     create mode 100644 configs/kp_imx53_defconfig
>     create mode 100644 drivers/power/pmic/mc34708.c
>     create mode 100644 include/configs/kp_imx53.h
> 
>     -- 
>     =====================================================================
>     DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
>     HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>     Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
>     =====================================================================
>     _______________________________________________
>     U-Boot mailing list
>     U-Boot at lists.denx.de
>     https://lists.denx.de/listinfo/u-boot
> 
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-05-17 17:08 ` [U-Boot] [PULL] Please pull u-boot-imx Stefano Babic
@ 2018-05-17 20:15   ` Tom Rini
  2018-05-17 21:52     ` Lukasz Majewski
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2018-05-17 20:15 UTC (permalink / raw)
  To: u-boot

On Thu, May 17, 2018 at 07:08:37PM +0200, Stefano Babic wrote:
> On 17/05/2018 18:33, Lukasz Majewski wrote:
> > Hi Stefano, Tom,
> > 
> 
> Tom was not in CC, added
> 
> > On 17 May 2018 17:50, Stefano Babic <sbabic@denx.de> wrote:
> > 
> >     Hi Tom,
> > 
> >     please pull from u-boot-imx, thanks !
> > 
> >     The following changes since commit
> >     f2d0f5e7ab3b8a7b4bf6e2ac499b4867c701d52d:
> > 
> >       ARM: re-enable MVGBE for edminiv2 (2018-05-16 11:38:08 -0400)
> > 
> >     are available in the git repository at:
> > 
> >       git://www.denx.de/git/u-boot-imx.git master
> > 
> >     for you to fetch changes up to 2f5988533d5c447d7bda79b0d9719f84db9e1835:
> > 
> >       imx6: sabrelite: update defconfig to use distro defaults (2018-05-17
> >     17:47:17 +0200)
> > 
> >     ----------------------------------------------------------------
> >     Guillaume GARDET (2):
> >           imx6: Convert sabrelite and nitrogen6x boards to distro boot
> >     support
> >           imx6: sabrelite: update defconfig to use distro defaults
> > 
> >     Ian Ray (6):
> >           board: ge: bx50v3: add winbond SPI NOR support
> >           board: ge: bx50v3: rename detect_baseboard function
> >           board: ge: bx50v3: fix display support for b{46}50v3
> >           board: ge: bx50v3: use VPD instead of compile-time checks
> >           board: ge: bx50v3: configure video arguments using VPD
> >           board: ge: bx50v3: remove redundant targets
> > 
> >     Lukasz Majewski (8):
> >           dts: imx53: Add gpio and i2c nodes to imx53.dtsi file
> >           dts: pinctrl: Provide IMX_PAD_SION definition for imx53 pinctrl
> > 
> > 
> > Two above patches are correct.
> > 
> >           pmic: fsl: Provide some more definitions for MC34708 PMIC
> >           pmic: fsl: Define number of bytes sent at once by MC34708 PMIC
> >           pmic: dm: Provide *trans_len() callback for pmic-uclass
> >           pmic: dm: Rewrite pmic_reg_{read|write} and pmic_clrsetbits to
> >     support transmissions larger than 1 byte
> >           pmic: dm: Add support for MC34708 for PMIC DM
> >           arm: imx53: Add support for imx53 boards from K+P
> > 
> > 
> > Stefano, Tom please drop above patches as they were superseded by v2 and
> > v3 (after discussion with Simon).
> 
> I have just added the pmic patches due to the dependency in "arm: imx53:
> Add support for imx53 boards from K+P", and I have not seen any change
> request in them. I drop the series, Tom please wait, I will send a new
> PR after.

OK.

> > IMHO v3 is eligible for pulling:
> > https://patchwork.ozlabs.org/patch/913670/
> > 
> 
> Should they flow into Jaehoon's tree instead of u-boot-imx ?

I'm fine with this coming along via the imx tree so we can get it in
now.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180517/e0cd3ebf/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-05-17 20:15   ` Tom Rini
@ 2018-05-17 21:52     ` Lukasz Majewski
  0 siblings, 0 replies; 307+ messages in thread
From: Lukasz Majewski @ 2018-05-17 21:52 UTC (permalink / raw)
  To: u-boot

Hi Tom, Stefano,

> On Thu, May 17, 2018 at 07:08:37PM +0200, Stefano Babic wrote:
> > On 17/05/2018 18:33, Lukasz Majewski wrote:  
> > > Hi Stefano, Tom,
> > >   
> > 
> > Tom was not in CC, added
> >   
> > > On 17 May 2018 17:50, Stefano Babic <sbabic@denx.de> wrote:
> > > 
> > >     Hi Tom,
> > > 
> > >     please pull from u-boot-imx, thanks !
> > > 
> > >     The following changes since commit
> > >     f2d0f5e7ab3b8a7b4bf6e2ac499b4867c701d52d:
> > > 
> > >       ARM: re-enable MVGBE for edminiv2 (2018-05-16 11:38:08
> > > -0400)
> > > 
> > >     are available in the git repository at:
> > > 
> > >       git://www.denx.de/git/u-boot-imx.git master
> > > 
> > >     for you to fetch changes up to
> > > 2f5988533d5c447d7bda79b0d9719f84db9e1835:
> > > 
> > >       imx6: sabrelite: update defconfig to use distro defaults
> > > (2018-05-17 17:47:17 +0200)
> > > 
> > >     ----------------------------------------------------------------
> > >     Guillaume GARDET (2):
> > >           imx6: Convert sabrelite and nitrogen6x boards to distro
> > > boot support
> > >           imx6: sabrelite: update defconfig to use distro defaults
> > > 
> > >     Ian Ray (6):
> > >           board: ge: bx50v3: add winbond SPI NOR support
> > >           board: ge: bx50v3: rename detect_baseboard function
> > >           board: ge: bx50v3: fix display support for b{46}50v3
> > >           board: ge: bx50v3: use VPD instead of compile-time
> > > checks board: ge: bx50v3: configure video arguments using VPD
> > >           board: ge: bx50v3: remove redundant targets
> > > 
> > >     Lukasz Majewski (8):
> > >           dts: imx53: Add gpio and i2c nodes to imx53.dtsi file
> > >           dts: pinctrl: Provide IMX_PAD_SION definition for imx53
> > > pinctrl
> > > 
> > > 
> > > Two above patches are correct.
> > > 
> > >           pmic: fsl: Provide some more definitions for MC34708
> > > PMIC pmic: fsl: Define number of bytes sent at once by MC34708
> > > PMIC pmic: dm: Provide *trans_len() callback for pmic-uclass
> > >           pmic: dm: Rewrite pmic_reg_{read|write} and
> > > pmic_clrsetbits to support transmissions larger than 1 byte
> > >           pmic: dm: Add support for MC34708 for PMIC DM
> > >           arm: imx53: Add support for imx53 boards from K+P
> > > 
> > > 
> > > Stefano, Tom please drop above patches as they were superseded by
> > > v2 and v3 (after discussion with Simon).  
> > 
> > I have just added the pmic patches due to the dependency in "arm:
> > imx53: Add support for imx53 boards from K+P", and I have not seen
> > any change request in them. I drop the series, Tom please wait, I
> > will send a new PR after.  
> 
> OK.
> 
> > > IMHO v3 is eligible for pulling:
> > > https://patchwork.ozlabs.org/patch/913670/
> > >   
> > 
> > Should they flow into Jaehoon's tree instead of u-boot-imx ?  
> 
> I'm fine with this coming along via the imx tree so we can get it in
> now.
> 

I would also opt for this option.

For the future - I've looked at:

http://git.denx.de/?p=u-boot/u-boot-pmic.git;a=summary
https://www.denx.de/wiki/U-Boot/Custodians   (which seems outdated
anyway)

It seems like u-boot-pmic repo is dead (as Przemek is not doing any
open source work since 2017). If you think that it helps
- I can take it and rise my hand to be PMIC maintainer (again).


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180517/2007190b/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-11-19 11:17                           ` Fabio Estevam
@ 2018-11-19 13:26                             ` Peter Robinson
  0 siblings, 0 replies; 307+ messages in thread
From: Peter Robinson @ 2018-11-19 13:26 UTC (permalink / raw)
  To: u-boot

On Mon, Nov 19, 2018 at 11:17 AM Fabio Estevam <festevam@gmail.com> wrote:
>
> Ricardo/Peter,
>
> On Mon, Nov 19, 2018 at 5:44 AM Baruch Siach <baruch@tkos.co.il> wrote:
>
> > I guess Fabio's patch would fix the issue for you. Indefinite loops are not a
> > good idea in general, I think.
>
> I have just sent a patch that avoids the infinite loop.
>
> Please test it when you have a chance.

Replied with my tested by on the patch but 2018.11 with that patch
boots fine for me on the HB2 imx6q rev 1.5 SOM.

Thanks,
Peter

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-11-19  7:44                         ` Baruch Siach
@ 2018-11-19 11:17                           ` Fabio Estevam
  2018-11-19 13:26                             ` Peter Robinson
  0 siblings, 1 reply; 307+ messages in thread
From: Fabio Estevam @ 2018-11-19 11:17 UTC (permalink / raw)
  To: u-boot

Ricardo/Peter,

On Mon, Nov 19, 2018 at 5:44 AM Baruch Siach <baruch@tkos.co.il> wrote:

> I guess Fabio's patch would fix the issue for you. Indefinite loops are not a
> good idea in general, I think.

I have just sent a patch that avoids the infinite loop.

Please test it when you have a chance.

Thanks

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-11-18 19:43                       ` Ricardo Salveti
  2018-11-18 20:29                         ` Baruch Siach
  2018-11-19  1:35                         ` Fabio Estevam
@ 2018-11-19  7:44                         ` Baruch Siach
  2018-11-19 11:17                           ` Fabio Estevam
  2 siblings, 1 reply; 307+ messages in thread
From: Baruch Siach @ 2018-11-19  7:44 UTC (permalink / raw)
  To: u-boot

Hi Ricardo,

On Sun, Nov 18, 2018 at 05:43:02PM -0200, Ricardo Salveti wrote:
> On Sun, Nov 18, 2018 at 7:51 AM Baruch Siach <baruch@tkos.co.il> wrote:
> > Peter Robinson writes:
> > > On Fri, Nov 16, 2018 at 1:06 AM Ricardo Salveti <rsalveti@rsalveti.net> wrote:
> > >> On Wed, Nov 14, 2018 at 5:07 AM Baruch Siach <baruch@tkos.co.il> wrote:
> > >> > On Tue, Nov 13, 2018 at 11:42:44AM -0200, Ricardo Salveti wrote:
> > >> > > On Thu, Sep 6, 2018 at 12:52 PM Fabio Estevam <festevam@gmail.com> wrote:
> > >> > > > On Thu, Sep 6, 2018 at 12:42 PM, Baruch Siach <baruch@tkos.co.il> wrote:
> > >> > > >
> > >> > > > > I tested current master successfully on Hummingboard2 with i.MX6 Solo
> > >> > > > > (SOM rev 1.5):
> > >> > > >
> > >> > > > Thanks for testing.
> > >> > > >
> > >> > > > It seems we need more information from Peter about the regression he reported.
> > >> > > >
> > >> > > > It would be helpful if Peter could run a bisect so that we could
> > >> > > > understand where the regression is coming from.
> > >> > >
> > >> > > Finally got the time to test u-boot 2018.09 on my hummingboard 2 and I
> > >> > > can also confirm the boot issue with imx6q (Hummingboard 2 MicroSOM
> > >> > > i2eX iMX6D - rev 1.3).
> > >> > >
> > >> > > The patch set that introduced this regression was part of another pull
> > >> > > request, the one that introduces eMMC booting support (from Jon
> > >> > > Nettleton, e.g. 86e5a7fc13 and 19ed6063a5). After doing some more
> > >> > > testing it seems that the hang happens when trying to verify if the
> > >> > > board has eMMC during runtime (has_emmc -> mmc_get_op_cond(mmc)),
> > >> > > which is not the case for this SOM in particular (and probably why it
> > >> > > works fine on most rev 1.5-based SOMs, as eMMC is usually available
> > >> > > there).
> > >> > >
> > >> > > Tested with current u-boot master and the issue is still valid.
> > >> > >
> > >> > > Jon, did you have any issue when testing that patch set on SOMs
> > >> > > without eMMC support?
> > >> >
> > >> > I tested U-Boot successfully with SOM rev 1.3 (no eMMC) on Hummingboard2, as
> > >> > shown in my previous message on this thread.
> > >>
> > >> Indeed, you tested with i.MX6Q, only difference is that mine is iMX6D,
> > >> but both without eMMC.
> > >
> > > I see the issue with a .IMX6Q wirth SOM rev 1.5 (TI wifi, no EMMC) on
> > > a hummingboard2
> >
> > I could not reproduce with SOM rev 1.3 (no eMMC) on Hummingboard2.
> >
> > >> > What toolchain are you using?
> > >>
> > >> Using GCC 8.2 from latest OpenEmbedded. Will try building with the
> > >> version you used to see if I get any different behavior.
> > >
> > > gcc 8.2.x from Fedora 29
> >
> > I am using the ARM (Ltd) provided GNU toolchain version 8.2:
> >
> > => version
> > U-Boot 2018.11 (Nov 18 2018 - 11:22:16 +0200)
> >
> > arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.2-2018-08 (arm-rel-8.23)) 8.2.1 20180802
> > GNU ld (GNU Toolchain for the A-profile Architecture 8.2-2018-08 (arm-rel-8.23)) 2.30.0.20180625
> >
> > >> > What do you see on the serial console?
> > >>
> > >> It boots up to the point when it tries to find the emmc, and then it
> > >> basically hangs completely (tested with current master):
> > >>
> > >> U-Boot SPL 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
> > >> Trying to boot from MMC1
> > >>
> > >> U-Boot 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
> > >>
> > >> CPU:   Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz)
> > >> CPU:   Extended Commercial temperature grade (-20C to 105C) at 33C
> > >> Reset cause: POR
> > >> Board: MX6 HummingBoard2
> > >> DRAM:  1 GiB
> > >> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> > >> Loading Environment from MMC... *** Warning - bad CRC, using default environment
> > >>
> > >> No panel detected: default to HDMI
> > >> Display: HDMI (1024x768)
> > >> In:    serial
> > >> Out:   serial
> > >> Err:   serial
> > >> ---> hangs
> > >
> > > Exactly the same as I saw.
> >
> > Here is what I get at this point:
> >
> > In:    serial
> > Out:   serial
> > Err:   serial
> > Card did not respond to voltage select!
> > Net:   FEC
> > ...
> >
> > The error message is from drivers/mmc/mmc.c:mmc_get_op_cond(). The code
> > around this point might be the source of your issue. Can you add a few
> > prints in mmc_get_op_cond() to pinpoint the call that hangs the code?
> 
> Also tried with ARM's pre-built toolchain (same version), and got the
> same hang. Looking a bit further, it basically looks up while waiting
> the first mmc command to complete:
> 
> has_emmc -> mmc_get_op_cond -> mmc_send_if_cond (testing for SD
> version 2) -> mmc_send_cmd -> esdhc_send_cmd_common -> while
> (!(esdhc_read32(&regs->irqstat) & flags))
> 
> And the boot log with MMC_TRACE:
> 
> No panel detected: default to HDMI
> Display: HDMI (1024x768)
> In:    serial
> Out:   serial
> Err:   serial
> CMD_SEND:0
>                 ARG                      0x00000000
>                 MMC_RSP_NONE
> CMD_SEND:8
>                 ARG                      0x000001AA
> 
> The line where it locks up waiting for the command to complete:
> http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/mmc/fsl_esdhc.c;h=3cdfa7f5a689789ea2f24da867d7c947ab78c002;hb=HEAD#l455
> 
> Unclear why this only happens with this som/soc, maybe hardware/errata
> differences?

Here's what I get after adding irqstat print:

CMD_SEND:0
		ARG			 0x00000000
		MMC_RSP_NONE
CMD_SEND:8
		ARG			 0x000001AA
esdhc_send_cmd_common: irqstat: 10000
		RET			 -110

The irqstat register has the DTOE (Data Timeout Error) bit enabled right after 
the irqstat wait loop that hangs in your setup.

I guess Fabio's patch would fix the issue for you. Indefinite loops are not a 
good idea in general, I think.

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-11-18 19:43                       ` Ricardo Salveti
  2018-11-18 20:29                         ` Baruch Siach
@ 2018-11-19  1:35                         ` Fabio Estevam
  2018-11-19  7:44                         ` Baruch Siach
  2 siblings, 0 replies; 307+ messages in thread
From: Fabio Estevam @ 2018-11-19  1:35 UTC (permalink / raw)
  To: u-boot

Hi Ricardo,

On Sun, Nov 18, 2018 at 5:44 PM Ricardo Salveti <rsalveti@rsalveti.net> wrote:

> Also tried with ARM's pre-built toolchain (same version), and got the
> same hang. Looking a bit further, it basically looks up while waiting
> the first mmc command to complete:
>
> has_emmc -> mmc_get_op_cond -> mmc_send_if_cond (testing for SD
> version 2) -> mmc_send_cmd -> esdhc_send_cmd_common -> while
> (!(esdhc_read32(&regs->irqstat) & flags))

Does the change below help?

--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -396,6 +396,7 @@ static int esdhc_send_cmd_common(struct
fsl_esdhc_priv *priv, struct mmc *mmc,
        uint    irqstat;
        u32     flags = IRQSTAT_CC | IRQSTAT_CTOE;
        struct fsl_esdhc *regs = priv->esdhc_regs;
+       unsigned long start;

 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
        if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
@@ -453,8 +454,11 @@ static int esdhc_send_cmd_common(struct
fsl_esdhc_priv *priv, struct mmc *mmc,
                flags = IRQSTAT_BRR;

        /* Wait for the command to complete */
-       while (!(esdhc_read32(&regs->irqstat) & flags))
-               ;
+       start = get_timer(0);
+       while (!(esdhc_read32(&regs->irqstat) & flags)) {
+               if (get_timer(start) > 1000)
+               return -ETIMEDOUT;
+       }

        irqstat = esdhc_read32(&regs->irqstat);

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-11-18 20:29                         ` Baruch Siach
@ 2018-11-18 23:09                           ` Ricardo Salveti
  0 siblings, 0 replies; 307+ messages in thread
From: Ricardo Salveti @ 2018-11-18 23:09 UTC (permalink / raw)
  To: u-boot

Hi Baruch,

On Sun, Nov 18, 2018 at 6:29 PM Baruch Siach <baruch@tkos.co.il> wrote:
>
> Hi Ricardo,
>
> Ricardo Salveti writes:
> > The line where it locks up waiting for the command to complete:
> > http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/mmc/fsl_esdhc.c;h=3cdfa7f5a689789ea2f24da867d7c947ab78c002;hb=HEAD#l455
> >
> > Unclear why this only happens with this som/soc, maybe hardware/errata
> > differences?
> >
> > Let me know if you need any extra info.
>
> I'll take a look tomorrow.
>
> Can you reproduce this hang with these binary images:
>
>   https://images.solid-build.xyz/IMX6/U-Boot/spl-imx6-sdhc.bin
>   https://images.solid-build.xyz/IMX6/U-Boot/u-boot-imx6-sdhc.img

Yup, looks like it hangs at the same place:

U-Boot SPL 2018.01-02296-g457cdd60c3 (May 17 2018 - 22:59:22)
Trying to boot from MMC1

U-Boot 2018.01-02296-g457cdd60c3 (May 17 2018 - 22:59:22 +0200),
Build: jenkins-u-boot-imx6-variant=sdhc-2

CPU:   Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 26C
Reset cause: POR
Board: MX6 HummingBoard2
       Watchdog enabled
DRAM:  1 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
---> hangs
Cheers,
--
Ricardo Salveti de Araujo

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-11-18 19:43                       ` Ricardo Salveti
@ 2018-11-18 20:29                         ` Baruch Siach
  2018-11-18 23:09                           ` Ricardo Salveti
  2018-11-19  1:35                         ` Fabio Estevam
  2018-11-19  7:44                         ` Baruch Siach
  2 siblings, 1 reply; 307+ messages in thread
From: Baruch Siach @ 2018-11-18 20:29 UTC (permalink / raw)
  To: u-boot

Hi Ricardo,

Ricardo Salveti writes:
> On Sun, Nov 18, 2018 at 7:51 AM Baruch Siach <baruch@tkos.co.il> wrote:
>> Peter Robinson writes:
>> > On Fri, Nov 16, 2018 at 1:06 AM Ricardo Salveti <rsalveti@rsalveti.net> wrote:
>> >> On Wed, Nov 14, 2018 at 5:07 AM Baruch Siach <baruch@tkos.co.il> wrote:
>> >> > On Tue, Nov 13, 2018 at 11:42:44AM -0200, Ricardo Salveti wrote:
>> >> > > On Thu, Sep 6, 2018 at 12:52 PM Fabio Estevam <festevam@gmail.com> wrote:
>> >> > > > On Thu, Sep 6, 2018 at 12:42 PM, Baruch Siach <baruch@tkos.co.il> wrote:
>> >> > > >
>> >> > > > > I tested current master successfully on Hummingboard2 with i.MX6 Solo
>> >> > > > > (SOM rev 1.5):
>> >> > > >
>> >> > > > Thanks for testing.
>> >> > > >
>> >> > > > It seems we need more information from Peter about the regression he reported.
>> >> > > >
>> >> > > > It would be helpful if Peter could run a bisect so that we could
>> >> > > > understand where the regression is coming from.
>> >> > >
>> >> > > Finally got the time to test u-boot 2018.09 on my hummingboard 2 and I
>> >> > > can also confirm the boot issue with imx6q (Hummingboard 2 MicroSOM
>> >> > > i2eX iMX6D - rev 1.3).
>> >> > >
>> >> > > The patch set that introduced this regression was part of another pull
>> >> > > request, the one that introduces eMMC booting support (from Jon
>> >> > > Nettleton, e.g. 86e5a7fc13 and 19ed6063a5). After doing some more
>> >> > > testing it seems that the hang happens when trying to verify if the
>> >> > > board has eMMC during runtime (has_emmc -> mmc_get_op_cond(mmc)),
>> >> > > which is not the case for this SOM in particular (and probably why it
>> >> > > works fine on most rev 1.5-based SOMs, as eMMC is usually available
>> >> > > there).
>> >> > >
>> >> > > Tested with current u-boot master and the issue is still valid.
>> >> > >
>> >> > > Jon, did you have any issue when testing that patch set on SOMs
>> >> > > without eMMC support?
>> >> >
>> >> > I tested U-Boot successfully with SOM rev 1.3 (no eMMC) on Hummingboard2, as
>> >> > shown in my previous message on this thread.
>> >>
>> >> Indeed, you tested with i.MX6Q, only difference is that mine is iMX6D,
>> >> but both without eMMC.
>> >
>> > I see the issue with a .IMX6Q wirth SOM rev 1.5 (TI wifi, no EMMC) on
>> > a hummingboard2
>>
>> I could not reproduce with SOM rev 1.3 (no eMMC) on Hummingboard2.
>>
>> >> > What toolchain are you using?
>> >>
>> >> Using GCC 8.2 from latest OpenEmbedded. Will try building with the
>> >> version you used to see if I get any different behavior.
>> >
>> > gcc 8.2.x from Fedora 29
>>
>> I am using the ARM (Ltd) provided GNU toolchain version 8.2:
>>
>> => version
>> U-Boot 2018.11 (Nov 18 2018 - 11:22:16 +0200)
>>
>> arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.2-2018-08 (arm-rel-8.23)) 8.2.1 20180802
>> GNU ld (GNU Toolchain for the A-profile Architecture 8.2-2018-08 (arm-rel-8.23)) 2.30.0.20180625
>>
>> >> > What do you see on the serial console?
>> >>
>> >> It boots up to the point when it tries to find the emmc, and then it
>> >> basically hangs completely (tested with current master):
>> >>
>> >> U-Boot SPL 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
>> >> Trying to boot from MMC1
>> >>
>> >> U-Boot 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
>> >>
>> >> CPU:   Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz)
>> >> CPU:   Extended Commercial temperature grade (-20C to 105C) at 33C
>> >> Reset cause: POR
>> >> Board: MX6 HummingBoard2
>> >> DRAM:  1 GiB
>> >> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
>> >> Loading Environment from MMC... *** Warning - bad CRC, using default environment
>> >>
>> >> No panel detected: default to HDMI
>> >> Display: HDMI (1024x768)
>> >> In:    serial
>> >> Out:   serial
>> >> Err:   serial
>> >> ---> hangs
>> >
>> > Exactly the same as I saw.
>>
>> Here is what I get at this point:
>>
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Card did not respond to voltage select!
>> Net:   FEC
>> ...
>>
>> The error message is from drivers/mmc/mmc.c:mmc_get_op_cond(). The code
>> around this point might be the source of your issue. Can you add a few
>> prints in mmc_get_op_cond() to pinpoint the call that hangs the code?
>
> Also tried with ARM's pre-built toolchain (same version), and got the
> same hang. Looking a bit further, it basically looks up while waiting
> the first mmc command to complete:
>
> has_emmc -> mmc_get_op_cond -> mmc_send_if_cond (testing for SD
> version 2) -> mmc_send_cmd -> esdhc_send_cmd_common -> while
> (!(esdhc_read32(&regs->irqstat) & flags))
>
> And the boot log with MMC_TRACE:
>
> No panel detected: default to HDMI
> Display: HDMI (1024x768)
> In:    serial
> Out:   serial
> Err:   serial
> CMD_SEND:0
>                 ARG                      0x00000000
>                 MMC_RSP_NONE
> CMD_SEND:8
>                 ARG                      0x000001AA
>
> The line where it locks up waiting for the command to complete:
> http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/mmc/fsl_esdhc.c;h=3cdfa7f5a689789ea2f24da867d7c947ab78c002;hb=HEAD#l455
>
> Unclear why this only happens with this som/soc, maybe hardware/errata
> differences?
>
> Let me know if you need any extra info.

I'll take a look tomorrow.

Can you reproduce this hang with these binary images:

  https://images.solid-build.xyz/IMX6/U-Boot/spl-imx6-sdhc.bin
  https://images.solid-build.xyz/IMX6/U-Boot/u-boot-imx6-sdhc.img

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-11-18  9:51                     ` Baruch Siach
@ 2018-11-18 19:43                       ` Ricardo Salveti
  2018-11-18 20:29                         ` Baruch Siach
                                           ` (2 more replies)
  0 siblings, 3 replies; 307+ messages in thread
From: Ricardo Salveti @ 2018-11-18 19:43 UTC (permalink / raw)
  To: u-boot

Hi Baruch,

On Sun, Nov 18, 2018 at 7:51 AM Baruch Siach <baruch@tkos.co.il> wrote:
>
> Hi Peter, Ricardo,
>
> Peter Robinson writes:
> > On Fri, Nov 16, 2018 at 1:06 AM Ricardo Salveti <rsalveti@rsalveti.net> wrote:
> >> On Wed, Nov 14, 2018 at 5:07 AM Baruch Siach <baruch@tkos.co.il> wrote:
> >> > On Tue, Nov 13, 2018 at 11:42:44AM -0200, Ricardo Salveti wrote:
> >> > > On Thu, Sep 6, 2018 at 12:52 PM Fabio Estevam <festevam@gmail.com> wrote:
> >> > > > On Thu, Sep 6, 2018 at 12:42 PM, Baruch Siach <baruch@tkos.co.il> wrote:
> >> > > >
> >> > > > > I tested current master successfully on Hummingboard2 with i.MX6 Solo
> >> > > > > (SOM rev 1.5):
> >> > > >
> >> > > > Thanks for testing.
> >> > > >
> >> > > > It seems we need more information from Peter about the regression he reported.
> >> > > >
> >> > > > It would be helpful if Peter could run a bisect so that we could
> >> > > > understand where the regression is coming from.
> >> > >
> >> > > Finally got the time to test u-boot 2018.09 on my hummingboard 2 and I
> >> > > can also confirm the boot issue with imx6q (Hummingboard 2 MicroSOM
> >> > > i2eX iMX6D - rev 1.3).
> >> > >
> >> > > The patch set that introduced this regression was part of another pull
> >> > > request, the one that introduces eMMC booting support (from Jon
> >> > > Nettleton, e.g. 86e5a7fc13 and 19ed6063a5). After doing some more
> >> > > testing it seems that the hang happens when trying to verify if the
> >> > > board has eMMC during runtime (has_emmc -> mmc_get_op_cond(mmc)),
> >> > > which is not the case for this SOM in particular (and probably why it
> >> > > works fine on most rev 1.5-based SOMs, as eMMC is usually available
> >> > > there).
> >> > >
> >> > > Tested with current u-boot master and the issue is still valid.
> >> > >
> >> > > Jon, did you have any issue when testing that patch set on SOMs
> >> > > without eMMC support?
> >> >
> >> > I tested U-Boot successfully with SOM rev 1.3 (no eMMC) on Hummingboard2, as
> >> > shown in my previous message on this thread.
> >>
> >> Indeed, you tested with i.MX6Q, only difference is that mine is iMX6D,
> >> but both without eMMC.
> >
> > I see the issue with a .IMX6Q wirth SOM rev 1.5 (TI wifi, no EMMC) on
> > a hummingboard2
>
> I could not reproduce with SOM rev 1.3 (no eMMC) on Hummingboard2.
>
> >> > What toolchain are you using?
> >>
> >> Using GCC 8.2 from latest OpenEmbedded. Will try building with the
> >> version you used to see if I get any different behavior.
> >
> > gcc 8.2.x from Fedora 29
>
> I am using the ARM (Ltd) provided GNU toolchain version 8.2:
>
> => version
> U-Boot 2018.11 (Nov 18 2018 - 11:22:16 +0200)
>
> arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.2-2018-08 (arm-rel-8.23)) 8.2.1 20180802
> GNU ld (GNU Toolchain for the A-profile Architecture 8.2-2018-08 (arm-rel-8.23)) 2.30.0.20180625
>
> >> > What do you see on the serial console?
> >>
> >> It boots up to the point when it tries to find the emmc, and then it
> >> basically hangs completely (tested with current master):
> >>
> >> U-Boot SPL 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
> >> Trying to boot from MMC1
> >>
> >> U-Boot 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
> >>
> >> CPU:   Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz)
> >> CPU:   Extended Commercial temperature grade (-20C to 105C) at 33C
> >> Reset cause: POR
> >> Board: MX6 HummingBoard2
> >> DRAM:  1 GiB
> >> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> >> Loading Environment from MMC... *** Warning - bad CRC, using default environment
> >>
> >> No panel detected: default to HDMI
> >> Display: HDMI (1024x768)
> >> In:    serial
> >> Out:   serial
> >> Err:   serial
> >> ---> hangs
> >
> > Exactly the same as I saw.
>
> Here is what I get at this point:
>
> In:    serial
> Out:   serial
> Err:   serial
> Card did not respond to voltage select!
> Net:   FEC
> ...
>
> The error message is from drivers/mmc/mmc.c:mmc_get_op_cond(). The code
> around this point might be the source of your issue. Can you add a few
> prints in mmc_get_op_cond() to pinpoint the call that hangs the code?

Also tried with ARM's pre-built toolchain (same version), and got the
same hang. Looking a bit further, it basically looks up while waiting
the first mmc command to complete:

has_emmc -> mmc_get_op_cond -> mmc_send_if_cond (testing for SD
version 2) -> mmc_send_cmd -> esdhc_send_cmd_common -> while
(!(esdhc_read32(&regs->irqstat) & flags))

And the boot log with MMC_TRACE:

No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
CMD_SEND:0
                ARG                      0x00000000
                MMC_RSP_NONE
CMD_SEND:8
                ARG                      0x000001AA

The line where it locks up waiting for the command to complete:
http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/mmc/fsl_esdhc.c;h=3cdfa7f5a689789ea2f24da867d7c947ab78c002;hb=HEAD#l455

Unclear why this only happens with this som/soc, maybe hardware/errata
differences?

Let me know if you need any extra info.

Cheers,
-- 
Ricardo Salveti de Araujo

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-11-16 14:16                   ` Peter Robinson
@ 2018-11-18  9:51                     ` Baruch Siach
  2018-11-18 19:43                       ` Ricardo Salveti
  0 siblings, 1 reply; 307+ messages in thread
From: Baruch Siach @ 2018-11-18  9:51 UTC (permalink / raw)
  To: u-boot

Hi Peter, Ricardo,

Peter Robinson writes:
> On Fri, Nov 16, 2018 at 1:06 AM Ricardo Salveti <rsalveti@rsalveti.net> wrote:
>> On Wed, Nov 14, 2018 at 5:07 AM Baruch Siach <baruch@tkos.co.il> wrote:
>> > On Tue, Nov 13, 2018 at 11:42:44AM -0200, Ricardo Salveti wrote:
>> > > On Thu, Sep 6, 2018 at 12:52 PM Fabio Estevam <festevam@gmail.com> wrote:
>> > > > On Thu, Sep 6, 2018 at 12:42 PM, Baruch Siach <baruch@tkos.co.il> wrote:
>> > > >
>> > > > > I tested current master successfully on Hummingboard2 with i.MX6 Solo
>> > > > > (SOM rev 1.5):
>> > > >
>> > > > Thanks for testing.
>> > > >
>> > > > It seems we need more information from Peter about the regression he reported.
>> > > >
>> > > > It would be helpful if Peter could run a bisect so that we could
>> > > > understand where the regression is coming from.
>> > >
>> > > Finally got the time to test u-boot 2018.09 on my hummingboard 2 and I
>> > > can also confirm the boot issue with imx6q (Hummingboard 2 MicroSOM
>> > > i2eX iMX6D - rev 1.3).
>> > >
>> > > The patch set that introduced this regression was part of another pull
>> > > request, the one that introduces eMMC booting support (from Jon
>> > > Nettleton, e.g. 86e5a7fc13 and 19ed6063a5). After doing some more
>> > > testing it seems that the hang happens when trying to verify if the
>> > > board has eMMC during runtime (has_emmc -> mmc_get_op_cond(mmc)),
>> > > which is not the case for this SOM in particular (and probably why it
>> > > works fine on most rev 1.5-based SOMs, as eMMC is usually available
>> > > there).
>> > >
>> > > Tested with current u-boot master and the issue is still valid.
>> > >
>> > > Jon, did you have any issue when testing that patch set on SOMs
>> > > without eMMC support?
>> >
>> > I tested U-Boot successfully with SOM rev 1.3 (no eMMC) on Hummingboard2, as
>> > shown in my previous message on this thread.
>>
>> Indeed, you tested with i.MX6Q, only difference is that mine is iMX6D,
>> but both without eMMC.
>
> I see the issue with a .IMX6Q wirth SOM rev 1.5 (TI wifi, no EMMC) on
> a hummingboard2

I could not reproduce with SOM rev 1.3 (no eMMC) on Hummingboard2.

>> > What toolchain are you using?
>>
>> Using GCC 8.2 from latest OpenEmbedded. Will try building with the
>> version you used to see if I get any different behavior.
>
> gcc 8.2.x from Fedora 29

I am using the ARM (Ltd) provided GNU toolchain version 8.2:

=> version
U-Boot 2018.11 (Nov 18 2018 - 11:22:16 +0200)

arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.2-2018-08 (arm-rel-8.23)) 8.2.1 20180802
GNU ld (GNU Toolchain for the A-profile Architecture 8.2-2018-08 (arm-rel-8.23)) 2.30.0.20180625

>> > What do you see on the serial console?
>>
>> It boots up to the point when it tries to find the emmc, and then it
>> basically hangs completely (tested with current master):
>>
>> U-Boot SPL 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
>> Trying to boot from MMC1
>>
>> U-Boot 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
>>
>> CPU:   Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz)
>> CPU:   Extended Commercial temperature grade (-20C to 105C) at 33C
>> Reset cause: POR
>> Board: MX6 HummingBoard2
>> DRAM:  1 GiB
>> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
>> Loading Environment from MMC... *** Warning - bad CRC, using default environment
>>
>> No panel detected: default to HDMI
>> Display: HDMI (1024x768)
>> In:    serial
>> Out:   serial
>> Err:   serial
>> ---> hangs
>
> Exactly the same as I saw.

Here is what I get at this point:

In:    serial
Out:   serial
Err:   serial
Card did not respond to voltage select!
Net:   FEC
...

The error message is from drivers/mmc/mmc.c:mmc_get_op_cond(). The code
around this point might be the source of your issue. Can you add a few
prints in mmc_get_op_cond() to pinpoint the call that hangs the code?

Thanks,
baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-11-16  1:05                 ` Ricardo Salveti
@ 2018-11-16 14:16                   ` Peter Robinson
  2018-11-18  9:51                     ` Baruch Siach
  0 siblings, 1 reply; 307+ messages in thread
From: Peter Robinson @ 2018-11-16 14:16 UTC (permalink / raw)
  To: u-boot

On Fri, Nov 16, 2018 at 1:06 AM Ricardo Salveti <rsalveti@rsalveti.net> wrote:
>
> Hi Baruch,
>
> On Wed, Nov 14, 2018 at 5:07 AM Baruch Siach <baruch@tkos.co.il> wrote:
> >
> > Hi Ricardo,
> >
> > On Tue, Nov 13, 2018 at 11:42:44AM -0200, Ricardo Salveti wrote:
> > > On Thu, Sep 6, 2018 at 12:52 PM Fabio Estevam <festevam@gmail.com> wrote:
> > > > On Thu, Sep 6, 2018 at 12:42 PM, Baruch Siach <baruch@tkos.co.il> wrote:
> > > >
> > > > > I tested current master successfully on Hummingboard2 with i.MX6 Solo
> > > > > (SOM rev 1.5):
> > > >
> > > > Thanks for testing.
> > > >
> > > > It seems we need more information from Peter about the regression he reported.
> > > >
> > > > It would be helpful if Peter could run a bisect so that we could
> > > > understand where the regression is coming from.
> > >
> > > Finally got the time to test u-boot 2018.09 on my hummingboard 2 and I
> > > can also confirm the boot issue with imx6q (Hummingboard 2 MicroSOM
> > > i2eX iMX6D - rev 1.3).
> > >
> > > The patch set that introduced this regression was part of another pull
> > > request, the one that introduces eMMC booting support (from Jon
> > > Nettleton, e.g. 86e5a7fc13 and 19ed6063a5). After doing some more
> > > testing it seems that the hang happens when trying to verify if the
> > > board has eMMC during runtime (has_emmc -> mmc_get_op_cond(mmc)),
> > > which is not the case for this SOM in particular (and probably why it
> > > works fine on most rev 1.5-based SOMs, as eMMC is usually available
> > > there).
> > >
> > > Tested with current u-boot master and the issue is still valid.
> > >
> > > Jon, did you have any issue when testing that patch set on SOMs
> > > without eMMC support?
> >
> > I tested U-Boot successfully with SOM rev 1.3 (no eMMC) on Hummingboard2, as
> > shown in my previous message on this thread.
>
> Indeed, you tested with i.MX6Q, only difference is that mine is iMX6D,
> but both without eMMC.

I see the issue with a .IMX6Q wirth SOM rev 1.5 (TI wifi, no EMMC) on
a hummingboard2

> > What toolchain are you using?
>
> Using GCC 8.2 from latest OpenEmbedded. Will try building with the
> version you used to see if I get any different behavior.

gcc 8.2.x from Fedora 29

> > What do you see on the serial console?
>
> It boots up to the point when it tries to find the emmc, and then it
> basically hangs completely (tested with current master):
>
> U-Boot SPL 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
> Trying to boot from MMC1
>
> U-Boot 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
>
> CPU:   Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz)
> CPU:   Extended Commercial temperature grade (-20C to 105C) at 33C
> Reset cause: POR
> Board: MX6 HummingBoard2
> DRAM:  1 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> Loading Environment from MMC... *** Warning - bad CRC, using default environment
>
> No panel detected: default to HDMI
> Display: HDMI (1024x768)
> In:    serial
> Out:   serial
> Err:   serial
> ---> hangs

Exactly the same as I saw.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-11-14  7:07               ` Baruch Siach
@ 2018-11-16  1:05                 ` Ricardo Salveti
  2018-11-16 14:16                   ` Peter Robinson
  0 siblings, 1 reply; 307+ messages in thread
From: Ricardo Salveti @ 2018-11-16  1:05 UTC (permalink / raw)
  To: u-boot

Hi Baruch,

On Wed, Nov 14, 2018 at 5:07 AM Baruch Siach <baruch@tkos.co.il> wrote:
>
> Hi Ricardo,
>
> On Tue, Nov 13, 2018 at 11:42:44AM -0200, Ricardo Salveti wrote:
> > On Thu, Sep 6, 2018 at 12:52 PM Fabio Estevam <festevam@gmail.com> wrote:
> > > On Thu, Sep 6, 2018 at 12:42 PM, Baruch Siach <baruch@tkos.co.il> wrote:
> > >
> > > > I tested current master successfully on Hummingboard2 with i.MX6 Solo
> > > > (SOM rev 1.5):
> > >
> > > Thanks for testing.
> > >
> > > It seems we need more information from Peter about the regression he reported.
> > >
> > > It would be helpful if Peter could run a bisect so that we could
> > > understand where the regression is coming from.
> >
> > Finally got the time to test u-boot 2018.09 on my hummingboard 2 and I
> > can also confirm the boot issue with imx6q (Hummingboard 2 MicroSOM
> > i2eX iMX6D - rev 1.3).
> >
> > The patch set that introduced this regression was part of another pull
> > request, the one that introduces eMMC booting support (from Jon
> > Nettleton, e.g. 86e5a7fc13 and 19ed6063a5). After doing some more
> > testing it seems that the hang happens when trying to verify if the
> > board has eMMC during runtime (has_emmc -> mmc_get_op_cond(mmc)),
> > which is not the case for this SOM in particular (and probably why it
> > works fine on most rev 1.5-based SOMs, as eMMC is usually available
> > there).
> >
> > Tested with current u-boot master and the issue is still valid.
> >
> > Jon, did you have any issue when testing that patch set on SOMs
> > without eMMC support?
>
> I tested U-Boot successfully with SOM rev 1.3 (no eMMC) on Hummingboard2, as
> shown in my previous message on this thread.

Indeed, you tested with i.MX6Q, only difference is that mine is iMX6D,
but both without eMMC.

> What toolchain are you using?

Using GCC 8.2 from latest OpenEmbedded. Will try building with the
version you used to see if I get any different behavior.

> What do you see on the serial console?

It boots up to the point when it tries to find the emmc, and then it
basically hangs completely (tested with current master):

U-Boot SPL 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
Trying to boot from MMC1

U-Boot 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)

CPU:   Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 33C
Reset cause: POR
Board: MX6 HummingBoard2
DRAM:  1 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
---> hangs

Cheers,
-- 
Ricardo Salveti de Araujo

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-11-13 13:42             ` Ricardo Salveti
@ 2018-11-14  7:07               ` Baruch Siach
  2018-11-16  1:05                 ` Ricardo Salveti
  0 siblings, 1 reply; 307+ messages in thread
From: Baruch Siach @ 2018-11-14  7:07 UTC (permalink / raw)
  To: u-boot

Hi Ricardo,

On Tue, Nov 13, 2018 at 11:42:44AM -0200, Ricardo Salveti wrote:
> On Thu, Sep 6, 2018 at 12:52 PM Fabio Estevam <festevam@gmail.com> wrote:
> > On Thu, Sep 6, 2018 at 12:42 PM, Baruch Siach <baruch@tkos.co.il> wrote:
> >
> > > I tested current master successfully on Hummingboard2 with i.MX6 Solo
> > > (SOM rev 1.5):
> >
> > Thanks for testing.
> >
> > It seems we need more information from Peter about the regression he reported.
> >
> > It would be helpful if Peter could run a bisect so that we could
> > understand where the regression is coming from.
> 
> Finally got the time to test u-boot 2018.09 on my hummingboard 2 and I
> can also confirm the boot issue with imx6q (Hummingboard 2 MicroSOM
> i2eX iMX6D - rev 1.3).
> 
> The patch set that introduced this regression was part of another pull
> request, the one that introduces eMMC booting support (from Jon
> Nettleton, e.g. 86e5a7fc13 and 19ed6063a5). After doing some more
> testing it seems that the hang happens when trying to verify if the
> board has eMMC during runtime (has_emmc -> mmc_get_op_cond(mmc)),
> which is not the case for this SOM in particular (and probably why it
> works fine on most rev 1.5-based SOMs, as eMMC is usually available
> there).
> 
> Tested with current u-boot master and the issue is still valid.
> 
> Jon, did you have any issue when testing that patch set on SOMs
> without eMMC support?

I tested U-Boot successfully with SOM rev 1.3 (no eMMC) on Hummingboard2, as 
shown in my previous message on this thread.

What toolchain are you using?

What do you see on the serial console?

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-06 15:52           ` Fabio Estevam
  2018-09-06 16:28             ` Peter Robinson
@ 2018-11-13 13:42             ` Ricardo Salveti
  2018-11-14  7:07               ` Baruch Siach
  1 sibling, 1 reply; 307+ messages in thread
From: Ricardo Salveti @ 2018-11-13 13:42 UTC (permalink / raw)
  To: u-boot

On Thu, Sep 6, 2018 at 12:52 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Baruch,
>
> On Thu, Sep 6, 2018 at 12:42 PM, Baruch Siach <baruch@tkos.co.il> wrote:
>
> > I tested current master successfully on Hummingboard2 with i.MX6 Solo
> > (SOM rev 1.5):
>
> Thanks for testing.
>
> It seems we need more information from Peter about the regression he reported.
>
> It would be helpful if Peter could run a bisect so that we could
> understand where the regression is coming from.

Finally got the time to test u-boot 2018.09 on my hummingboard 2 and I
can also confirm the boot issue with imx6q (Hummingboard 2 MicroSOM
i2eX iMX6D - rev 1.3).

The patch set that introduced this regression was part of another pull
request, the one that introduces eMMC booting support (from Jon
Nettleton, e.g. 86e5a7fc13 and 19ed6063a5). After doing some more
testing it seems that the hang happens when trying to verify if the
board has eMMC during runtime (has_emmc -> mmc_get_op_cond(mmc)),
which is not the case for this SOM in particular (and probably why it
works fine on most rev 1.5-based SOMs, as eMMC is usually available
there).

Tested with current u-boot master and the issue is still valid.

Jon, did you have any issue when testing that patch set on SOMs
without eMMC support?

Cheers,
-- 
Ricardo Salveti de Araujo

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-10-24 13:38       ` Stefano Babic
@ 2018-10-25  8:37         ` Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2018-10-25  8:37 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please just wait a little for this. Fix for i.MX8 is still WIP, and now
it is in test. I will send a new PR later.

Thanks,
Stefano

On 24/10/18 15:38, Stefano Babic wrote:
> Hi Tom,
> 
> new PR (and new tag: u-boot-imx-20181024) with the fixes we discussed:
> 
> - fix build i.MX8 for Travis
> - fix warnings (Warp)
> 
> The following changes since commit 0a60a81ba3860946551cb79aa6486aa076e357f3:
> 
>   Kconfig: sandbox: enable cmd_avb and dependencies (2018-10-07 13:34:19
> -0400)
> 
> are available in the Git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181024
> 
> for you to fetch changes up to cf0f7fde7b2cd3944364c1e70a65603cdd3fa889:
> 
>   imx: mkimage: avoid stop CI when required files not exists (2018-10-24
> 13:23:36 +0200)
> 
> ----------------------------------------------------------------
> Merged imx8 architecture, fix build for imx8 + warnings
> 
> ----------------------------------------------------------------
> Anatolij Gustschin (3):
>       imx8: cpu: add function for reading FEC MAC from fuse
>       imx8: cpu: add uclass based CPU driver
>       i2c: imx_lpi2c: fix typo and register base address format
> 
> Bernhard Messerklinger (1):
>       serial: mxc: Add match string for i.mx6 quad/dual lite serial
> 
> Breno Matheus Lima (7):
>       doc: imx: reorganize i.MX documentation
>       doc: imx: Move SPD related info to the appropriate doc
>       doc: imx: mkimage: reorganize i.MX mkimage documentation
>       doc: imx: Reorganize i.MX SoC common documentation
>       doc: imx: hab: Reorganize High Assurance Boot documentation
>       doc: imx: misc: Reorganize miscellaneous documentation
>       doc: imx: Improve i.MX documentation naming
> 
> Dan Cimpoca (1):
>       board: ge: bx50v3: fix initialization of i2c bus0
> 
> Fabien Lahoudere (1):
>       board: ge: bx50v3: Change maintainer
> 
> Fabio Estevam (5):
>       pico-imx7d: Make SPL binary fit into 64kB
>       pico-imx7d: Add USB Host support
>       colibri_imx7: prime get_ram_size() using imx_ddr_size()
>       configs: mx7: Remove CONFIG_DBG_MONITOR
>       warp7: MAINTAINERS: Add an entry for warp7_bl33_defconfig
> 
> Ian Ray (2):
>       board: ge: bx50v3: correct LDB clock
>       board: ge: bx50v3: b{4,6}50v3 modeline
> 
> Marcel Ziswiler (1):
>       imx: mx7: fix potential overflow in imx_ddr_size()
> 
> Marek Vasut (3):
>       arm: imx: mx5: Make videoskip available on MX5
>       arm: mx5: Add LDB clock config code
>       arm: mx5: Add M53Menlo board
> 
> Otavio Salvador (2):
>       pico-imx6ul, pico-imx7d: Use eMMC user partition by default
>       pico-imx6ul, pico-imx7d: Enable USB and PXE boot support
> 
> Peng Fan (34):
>       dt-bindings: pinctrl: add i.MX8QXP pads definition
>       dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QXP clocks
> definition
>       dt-bindings: soc: add i.MX8QXP pm and rsrc definition
>       imx8: add scfw macro definition
>       imx: add Kconfig entry for i.MX8QXP
>       arm: build mach-imx for i.MX8
>       arm: global_data: add scu_dev for i.MX8
>       misc: add i.MX8 misc driver
>       misc: imx8: add scfw api impementation
>       imx: boot_mode: Add FLEXSPI boot entry
>       imx8: add imx-regs header file
>       imx8: pins: include i.MX8QXP pin header when CONFIG_IMX8QXP defined
>       imx: add i.MX8 cpu type
>       armv8: add cpu core helper functions
>       imx8: add basic cpu support
>       imx8: add boot device detection
>       imx8: implement mmc_get_env_dev
>       imx8: add mmu and dram related functions
>       imx8: add arch_cpu_init arch_cpu_init_dm
>       imx8: add iomux configuration api
>       imx8: add dummy clock
>       gpio: mxc_gpio: add support for i.MX8
>       pinctrl: Add pinctrl driver for i.MX8
>       power: Add power domain driver for i.MX8
>       clk: imx: add clk driver for i.MX8QXP
>       serial_lpuart: Update lpuart driver to support i.MX8
>       serial: lpuart: support uclass clk api
>       mmc: fsl_esdhc: add uclass clk support
>       arm: dts: introduce dtsi for i.MX8QXP
>       imx: add i.MX8QXP MEK board support
>       tools: add i.MX8/8X image support
>       arm: imx: include imx8image support
>       imx: imx8qxp_mek: update to build image in U-Boot
>       imx: mkimage: avoid stop CI when required files not exists
> 
> Rui Miguel Silva (4):
>       imx: mx7: avoid some initialization if low level is skipped
>       optee: adjust dependencies and default values for dram
>       warp7: include: configs: set skip low level init
>       warp7: configs: add bl33 defconfig
> 
> Sébastien Szymanski (1):
>       ARM: opos6ul: make the board boot again
> 
> Xiaoliang Yang (1):
>       Kconfig: Convert CONFIG_IMX_WATCHDOG to Kconfig
> 
> Ye Li (2):
>       serial: lpuart: Enable RX and TX FIFO
>       fsl_esdhc: Update usdhc driver to support i.MX8
> 
>  arch/arm/Kconfig                                      |   8 +
>  arch/arm/Makefile                                     |   2 +-
>  arch/arm/dts/Makefile                                 |   2 +
>  arch/arm/dts/fsl-imx8-ca35.dtsi                       |  66 +++++++
>  arch/arm/dts/fsl-imx8dx.dtsi                          | 499
> +++++++++++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/dts/fsl-imx8dxp.dtsi                         |  11 ++
>  arch/arm/dts/fsl-imx8qxp-mek.dts                      | 246
> ++++++++++++++++++++++++++
>  arch/arm/dts/fsl-imx8qxp.dtsi                         |  51 ++++++
>  arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi               |  28 +++
>  arch/arm/dts/imx6ul-opos6ul.dtsi                      |   2 -
>  arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi            |  24 +++
>  arch/arm/dts/imx6ul-opos6uldev.dts                    |   2 -
>  arch/arm/include/asm/arch-imx/cpu.h                   |   6 +
>  arch/arm/include/asm/arch-imx8/clock.h                |  27 +++
>  arch/arm/include/asm/arch-imx8/gpio.h                 |  21 +++
>  arch/arm/include/asm/arch-imx8/imx-regs.h             |  46 +++++
>  arch/arm/include/asm/arch-imx8/imx8-pins.h            |  15 ++
>  arch/arm/include/asm/arch-imx8/iomux.h                |  40 +++++
>  arch/arm/include/asm/arch-imx8/power-domain.h         |  15 ++
>  arch/arm/include/asm/arch-imx8/sci/rpc.h              | 158
> +++++++++++++++++
>  arch/arm/include/asm/arch-imx8/sci/sci.h              |  88 +++++++++
>  arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h     |  30 ++++
>  arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h      |  57 ++++++
>  arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h       |  44 +++++
>  arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h       |  69 ++++++++
>  arch/arm/include/asm/arch-imx8/sci/types.h            | 220
> +++++++++++++++++++++++
>  arch/arm/include/asm/arch-imx8/sys_proto.h            |  19 ++
>  arch/arm/include/asm/arch-mx5/clock.h                 |   1 +
>  arch/arm/include/asm/armv8/cpu.h                      |  26 +++
>  arch/arm/include/asm/global_data.h                    |   4 +
>  arch/arm/include/asm/mach-imx/boot_mode.h             |   1 +
>  arch/arm/include/asm/mach-imx/sys_proto.h             |   3 +
>  arch/arm/mach-imx/Makefile                            |  26 ++-
>  arch/arm/mach-imx/imx8/Kconfig                        |  26 +++
>  arch/arm/mach-imx/imx8/Makefile                       |   7 +
>  arch/arm/mach-imx/imx8/clock.c                        |  21 +++
>  arch/arm/mach-imx/imx8/cpu.c                          | 646
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/mach-imx/imx8/iomux.c                        |  43 +++++
>  arch/arm/mach-imx/mx5/Kconfig                         |   6 +
>  arch/arm/mach-imx/mx5/clock.c                         |  29 +++
>  arch/arm/mach-imx/mx7/ddr.c                           |   4 +
>  arch/arm/mach-imx/mx7/soc.c                           |   2 +
>  arch/arm/mach-imx/syscounter.c                        |   2 +
>  board/freescale/imx8qxp_mek/Kconfig                   |  14 ++
>  board/freescale/imx8qxp_mek/MAINTAINERS               |   6 +
>  board/freescale/imx8qxp_mek/Makefile                  |   7 +
>  board/freescale/imx8qxp_mek/README                    |  55 ++++++
>  board/freescale/imx8qxp_mek/imx8qxp_mek.c             | 170
> ++++++++++++++++++
>  board/freescale/imx8qxp_mek/imximage.cfg              |  25 +++
>  board/freescale/mx8mq_evk/README                      |  81 +++++++++
>  board/ge/bx50v3/MAINTAINERS                           |   2 +-
>  board/ge/bx50v3/bx50v3.c                              |  38 ++--
>  board/menlo/m53menlo/Kconfig                          |  15 ++
>  board/menlo/m53menlo/MAINTAINERS                      |   7 +
>  board/menlo/m53menlo/Makefile                         |   9 +
>  board/menlo/m53menlo/imximage.cfg                     |  91 ++++++++++
>  board/menlo/m53menlo/m53menlo.c                       | 513
> +++++++++++++++++++++++++++++++++++++++++++++++++++++
>  board/technexion/pico-imx7d/pico-imx7d.c              |  29 ++-
>  board/toradex/colibri_imx7/colibri_imx7.c             |   2 +-
>  board/warp7/MAINTAINERS                               |   1 +
>  common/image.c                                        |   1 +
>  configs/aristainetos2_defconfig                       |   1 +
>  configs/aristainetos2b_defconfig                      |   1 +
>  configs/aristainetos_defconfig                        |   1 +
>  configs/dh_imx6_defconfig                             |   1 +
>  configs/display5_defconfig                            |   1 +
>  configs/display5_factory_defconfig                    |   1 +
>  configs/ge_bx50v3_defconfig                           |   1 +
>  configs/imx8qxp_mek_defconfig                         |  52 ++++++
>  configs/kp_imx6q_tpc_defconfig                        |   1 +
>  configs/m53menlo_defconfig                            |  60 +++++++
>  configs/mx53ppd_defconfig                             |   1 +
>  configs/pico-hobbit-imx7d_defconfig                   |   1 -
>  configs/pico-imx7d_defconfig                          |   1 -
>  configs/pico-pi-imx7d_defconfig                       |   1 -
>  configs/tqma6s_wru4_mmc_defconfig                     |   1 +
>  configs/warp7_bl33_defconfig                          |  42 +++++
>  configs/warp7_defconfig                               |   2 +
>  configs/warp_defconfig                                |   1 +
>  doc/{README.imx25 => imx/common/imx25.txt}            |   0
>  doc/{README.imx27 => imx/common/imx27.txt}            |   0
>  doc/{README.imx5 => imx/common/imx5.txt}              |   0
>  doc/{README.imx6 => imx/common/imx6.txt}              |  25 ---
>  doc/{README.mxs => imx/common/mxs.txt}                |   0
>  doc/imx/hab/habv4/encrypted_boot.txt                  |  43 +++++
>  doc/{README.mxc_hab => imx/hab/habv4/secure_boot.txt} |  44 -----
>  doc/{README.sdp => imx/misc/sdp.txt}                  |  22 ++-
>  doc/{README.imximage => imx/mkimage/imximage.txt}     |   0
>  doc/{README.mxsimage => imx/mkimage/mxsimage.txt}     |   0
>  drivers/clk/Kconfig                                   |   1 +
>  drivers/clk/Makefile                                  |   1 +
>  drivers/clk/imx/Kconfig                               |   6 +
>  drivers/clk/imx/Makefile                              |   5 +
>  drivers/clk/imx/clk-imx8.c                            | 393
> +++++++++++++++++++++++++++++++++++++++++
>  drivers/gpio/mxc_gpio.c                               |  30 +++-
>  drivers/i2c/imx_lpi2c.c                               |   4 +-
>  drivers/misc/Makefile                                 |   1 +
>  drivers/misc/imx8/Makefile                            |   3 +
>  drivers/misc/imx8/scu.c                               | 266
> ++++++++++++++++++++++++++++
>  drivers/misc/imx8/scu_api.c                           | 367
> ++++++++++++++++++++++++++++++++++++++
>  drivers/mmc/fsl_esdhc.c                               |  34 +++-
>  drivers/pinctrl/nxp/Kconfig                           |  18 ++
>  drivers/pinctrl/nxp/Makefile                          |   2 +
>  drivers/pinctrl/nxp/pinctrl-imx.c                     | 209
> ++++++++++++----------
>  drivers/pinctrl/nxp/pinctrl-imx.h                     |  16 ++
>  drivers/pinctrl/nxp/pinctrl-imx8.c                    |  40 +++++
>  drivers/pinctrl/nxp/pinctrl-scu.c                     |  66 +++++++
>  drivers/power/domain/Kconfig                          |   8 +-
>  drivers/power/domain/Makefile                         |   1 +
>  drivers/power/domain/imx8-power-domain.c              | 315
> +++++++++++++++++++++++++++++++++
>  drivers/serial/serial_lpuart.c                        | 143 ++++++++++++---
>  drivers/serial/serial_mxc.c                           |   1 +
>  drivers/watchdog/Kconfig                              |   7 +
>  include/configs/aristainetos-common.h                 |   3 -
>  include/configs/cl-som-imx7.h                         |   2 -
>  include/configs/colibri-imx6ull.h                     |   1 -
>  include/configs/colibri_imx7.h                        |   3 -
>  include/configs/dh_imx6.h                             |   2 -
>  include/configs/display5.h                            |   2 -
>  include/configs/ge_bx50v3.h                           |   2 -
>  include/configs/imx8qxp_mek.h                         | 157
> +++++++++++++++++
>  include/configs/kp_imx6q_tpc.h                        |   2 -
>  include/configs/m53menlo.h                            | 246
> ++++++++++++++++++++++++++
>  include/configs/mx53ppd.h                             |   2 -
>  include/configs/mx7dsabresd.h                         |   1 -
>  include/configs/pico-imx6ul.h                         |   6 +-
>  include/configs/pico-imx7d.h                          |   6 +-
>  include/configs/tqma6_wru4.h                          |   2 -
>  include/configs/warp.h                                |   2 -
>  include/configs/warp7.h                               |  11 ++
>  include/dt-bindings/clock/imx8qxp-clock.h             | 583
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  include/dt-bindings/pinctrl/pads-imx8qxp.h            | 757
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  include/dt-bindings/soc/imx8_pd.h                     | 188
> ++++++++++++++++++++
>  include/dt-bindings/soc/imx_rsrc.h                    | 557
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  include/fsl_lpuart.h                                  |   2 +-
>  include/image.h                                       |   1 +
>  include/imx8image.h                                   | 273
> ++++++++++++++++++++++++++++
>  lib/optee/Kconfig                                     |   8 +-
>  scripts/config_whitelist.txt                          |   2 -
>  tools/Makefile                                        |   1 +
>  tools/imagetool.h                                     |   1 +
>  tools/imx8_cntr_image.sh                              |  32 ++++
>  tools/imx8image.c                                     | 961
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tools/mkimage.c                                       |   7 +
>  144 files changed, 9491 insertions(+), 282 deletions(-)
>  create mode 100644 arch/arm/dts/fsl-imx8-ca35.dtsi
>  create mode 100644 arch/arm/dts/fsl-imx8dx.dtsi
>  create mode 100644 arch/arm/dts/fsl-imx8dxp.dtsi
>  create mode 100644 arch/arm/dts/fsl-imx8qxp-mek.dts
>  create mode 100644 arch/arm/dts/fsl-imx8qxp.dtsi
>  create mode 100644 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi
>  create mode 100644 arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
>  create mode 100644 arch/arm/include/asm/arch-imx8/clock.h
>  create mode 100644 arch/arm/include/asm/arch-imx8/gpio.h
>  create mode 100644 arch/arm/include/asm/arch-imx8/imx-regs.h
>  create mode 100644 arch/arm/include/asm/arch-imx8/imx8-pins.h
>  create mode 100644 arch/arm/include/asm/arch-imx8/iomux.h
>  create mode 100644 arch/arm/include/asm/arch-imx8/power-domain.h
>  create mode 100644 arch/arm/include/asm/arch-imx8/sci/rpc.h
>  create mode 100644 arch/arm/include/asm/arch-imx8/sci/sci.h
>  create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h
>  create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h
>  create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h
>  create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h
>  create mode 100644 arch/arm/include/asm/arch-imx8/sci/types.h
>  create mode 100644 arch/arm/include/asm/arch-imx8/sys_proto.h
>  create mode 100644 arch/arm/include/asm/armv8/cpu.h
>  create mode 100644 arch/arm/mach-imx/imx8/Kconfig
>  create mode 100644 arch/arm/mach-imx/imx8/Makefile
>  create mode 100644 arch/arm/mach-imx/imx8/clock.c
>  create mode 100644 arch/arm/mach-imx/imx8/cpu.c
>  create mode 100644 arch/arm/mach-imx/imx8/iomux.c
>  create mode 100644 board/freescale/imx8qxp_mek/Kconfig
>  create mode 100644 board/freescale/imx8qxp_mek/MAINTAINERS
>  create mode 100644 board/freescale/imx8qxp_mek/Makefile
>  create mode 100644 board/freescale/imx8qxp_mek/README
>  create mode 100644 board/freescale/imx8qxp_mek/imx8qxp_mek.c
>  create mode 100644 board/freescale/imx8qxp_mek/imximage.cfg
>  create mode 100644 board/freescale/mx8mq_evk/README
>  create mode 100644 board/menlo/m53menlo/Kconfig
>  create mode 100644 board/menlo/m53menlo/MAINTAINERS
>  create mode 100644 board/menlo/m53menlo/Makefile
>  create mode 100644 board/menlo/m53menlo/imximage.cfg
>  create mode 100644 board/menlo/m53menlo/m53menlo.c
>  create mode 100644 configs/imx8qxp_mek_defconfig
>  create mode 100644 configs/m53menlo_defconfig
>  create mode 100644 configs/warp7_bl33_defconfig
>  rename doc/{README.imx25 => imx/common/imx25.txt} (100%)
>  rename doc/{README.imx27 => imx/common/imx27.txt} (100%)
>  rename doc/{README.imx5 => imx/common/imx5.txt} (100%)
>  rename doc/{README.imx6 => imx/common/imx6.txt} (73%)
>  rename doc/{README.mxs => imx/common/mxs.txt} (100%)
>  create mode 100644 doc/imx/hab/habv4/encrypted_boot.txt
>  rename doc/{README.mxc_hab => imx/hab/habv4/secure_boot.txt} (68%)
>  rename doc/{README.sdp => imx/misc/sdp.txt} (82%)
>  rename doc/{README.imximage => imx/mkimage/imximage.txt} (100%)
>  rename doc/{README.mxsimage => imx/mkimage/mxsimage.txt} (100%)
>  create mode 100644 drivers/clk/imx/Kconfig
>  create mode 100644 drivers/clk/imx/Makefile
>  create mode 100644 drivers/clk/imx/clk-imx8.c
>  create mode 100644 drivers/misc/imx8/Makefile
>  create mode 100644 drivers/misc/imx8/scu.c
>  create mode 100644 drivers/misc/imx8/scu_api.c
>  create mode 100644 drivers/pinctrl/nxp/pinctrl-imx8.c
>  create mode 100644 drivers/pinctrl/nxp/pinctrl-scu.c
>  create mode 100644 drivers/power/domain/imx8-power-domain.c
>  create mode 100644 include/configs/imx8qxp_mek.h
>  create mode 100644 include/configs/m53menlo.h
>  create mode 100644 include/dt-bindings/clock/imx8qxp-clock.h
>  create mode 100644 include/dt-bindings/pinctrl/pads-imx8qxp.h
>  create mode 100644 include/dt-bindings/soc/imx8_pd.h
>  create mode 100644 include/dt-bindings/soc/imx_rsrc.h
>  create mode 100644 include/imx8image.h
>  create mode 100755 tools/imx8_cntr_image.sh
>  create mode 100644 tools/imx8image.c
> 
> On 23/10/18 16:52, Tom Rini wrote:
>> On Tue, Oct 23, 2018 at 04:42:53PM +0200, Stefano Babic wrote:
>>> Hi Tom,
>>>
>>> On 23/10/18 16:29, Tom Rini wrote:
>>>> On Tue, Oct 23, 2018 at 09:52:58AM +0200, Stefano Babic wrote:
>>>>
>>>>> Hi Tom,
>>>>>
>>>>> please pull from u-boot-imx (tag: u-boot-imx-20181023) thanks !
>>>>>
>>>>> The tree contains fixes for i.MX6 and improvement in docs, but the most
>>>>> important part is the introduction of the i.MX8 architecture (thanks to
>>>>> Peng and Antolji for their work !). Build on Travis reported no error,
>>>>> but I get a build issue with the VF610 boards - this will be require a
>>>>> fix in next days. i.MX8 can be built following exactly the instruction
>>>>> of the README file (NXP firmware requires to acknowledge the EULA).
>>>>
>>>> I know the i.MX8 stuff has been kicking around for a while so.. OK, yes,
>>>> I won't be too upset about pushing it so late in the cycle.  But, my
>>>> travis builds do see an error:
>>>> https://travis-ci.org/trini/u-boot/jobs/445069389#L1038 which is "Fail
>>>> open first container file ahab-container.img" for imx8qxp_mek and I also
>>>> see that locally.
>>>
>>> I know: to build i.MX8, we need to download external firmware. In fact,
>>> we have to provide the files according to board/freescale/mx8mq_evk/README.
>>>
>>> Near "imx-atf" (this is not a problem, loaded and built), we need two
>>> additional "closed" firmware, that is firmware-imx (currently, 7.6) and
>>> imx-sc-firmware. They can be downloaded but they underly the acknowledge
>>> of NXP's EULA. They are self extracting scripts and we could hack it to
>>> have an automatic build, but I *guess* this breaks the license. I do not
>>> know if we are allowed to do this, and both of these firmwares do not
>>> provide a way to "implicitely" skip the EULA as we do in OE by setting a
>>> variable in local.conf.
>>>
>>>>  This feels like the same class of error that we have
>>>> to deal with on other AArch64 platforms, namely of throwing a user
>>>> visible error that what they just built will not boot due to lack of
>>>> other files.
>>>
>>> I am unsure: mkimage packs all files together as part of the build, when
>>> they are available. User cannot even try to boot, because the build
>>> stops if these files are not available. The error at mkimage step is
>>> saying us that build is not complete due to missing files (atf,
>>> firmware-imx and imx-sc-firmware).
>>
>> Yup, this is the same problem we have in other platforms.  Take a look
>> at board/sunxi/mksunxi_fit_atf.sh or tools/k3_fit_atf.sh for what we do
>> on some other platforms so that CI build completes but it's clear to the
>> end user that the binary will not work and what they need to do / read
>> to get a functional build.  There's also
>> arch/arm/mach-omap2/config_secure.mk as an example of all the fun we
>> have for building the secure TI platforms that more closely follow the
>> problem you have here, namely of needing EULA'd packages (and in those
>> cases, also NDA, iirc) installed to complete a functional build.  I
>> think you'll need to do something closer to the xxxx_fit_atf.sh scripts
>> in this case, to check for required blobs and if not found, not call
>> mkimage and echo something loud and visible to the user.
>>
> 
> Regards,
> Stefano
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-10-23 14:52     ` Tom Rini
@ 2018-10-24 13:38       ` Stefano Babic
  2018-10-25  8:37         ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-10-24 13:38 UTC (permalink / raw)
  To: u-boot

Hi Tom,

new PR (and new tag: u-boot-imx-20181024) with the fixes we discussed:

- fix build i.MX8 for Travis
- fix warnings (Warp)

The following changes since commit 0a60a81ba3860946551cb79aa6486aa076e357f3:

  Kconfig: sandbox: enable cmd_avb and dependencies (2018-10-07 13:34:19
-0400)

are available in the Git repository at:

  git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181024

for you to fetch changes up to cf0f7fde7b2cd3944364c1e70a65603cdd3fa889:

  imx: mkimage: avoid stop CI when required files not exists (2018-10-24
13:23:36 +0200)

----------------------------------------------------------------
Merged imx8 architecture, fix build for imx8 + warnings

----------------------------------------------------------------
Anatolij Gustschin (3):
      imx8: cpu: add function for reading FEC MAC from fuse
      imx8: cpu: add uclass based CPU driver
      i2c: imx_lpi2c: fix typo and register base address format

Bernhard Messerklinger (1):
      serial: mxc: Add match string for i.mx6 quad/dual lite serial

Breno Matheus Lima (7):
      doc: imx: reorganize i.MX documentation
      doc: imx: Move SPD related info to the appropriate doc
      doc: imx: mkimage: reorganize i.MX mkimage documentation
      doc: imx: Reorganize i.MX SoC common documentation
      doc: imx: hab: Reorganize High Assurance Boot documentation
      doc: imx: misc: Reorganize miscellaneous documentation
      doc: imx: Improve i.MX documentation naming

Dan Cimpoca (1):
      board: ge: bx50v3: fix initialization of i2c bus0

Fabien Lahoudere (1):
      board: ge: bx50v3: Change maintainer

Fabio Estevam (5):
      pico-imx7d: Make SPL binary fit into 64kB
      pico-imx7d: Add USB Host support
      colibri_imx7: prime get_ram_size() using imx_ddr_size()
      configs: mx7: Remove CONFIG_DBG_MONITOR
      warp7: MAINTAINERS: Add an entry for warp7_bl33_defconfig

Ian Ray (2):
      board: ge: bx50v3: correct LDB clock
      board: ge: bx50v3: b{4,6}50v3 modeline

Marcel Ziswiler (1):
      imx: mx7: fix potential overflow in imx_ddr_size()

Marek Vasut (3):
      arm: imx: mx5: Make videoskip available on MX5
      arm: mx5: Add LDB clock config code
      arm: mx5: Add M53Menlo board

Otavio Salvador (2):
      pico-imx6ul, pico-imx7d: Use eMMC user partition by default
      pico-imx6ul, pico-imx7d: Enable USB and PXE boot support

Peng Fan (34):
      dt-bindings: pinctrl: add i.MX8QXP pads definition
      dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QXP clocks
definition
      dt-bindings: soc: add i.MX8QXP pm and rsrc definition
      imx8: add scfw macro definition
      imx: add Kconfig entry for i.MX8QXP
      arm: build mach-imx for i.MX8
      arm: global_data: add scu_dev for i.MX8
      misc: add i.MX8 misc driver
      misc: imx8: add scfw api impementation
      imx: boot_mode: Add FLEXSPI boot entry
      imx8: add imx-regs header file
      imx8: pins: include i.MX8QXP pin header when CONFIG_IMX8QXP defined
      imx: add i.MX8 cpu type
      armv8: add cpu core helper functions
      imx8: add basic cpu support
      imx8: add boot device detection
      imx8: implement mmc_get_env_dev
      imx8: add mmu and dram related functions
      imx8: add arch_cpu_init arch_cpu_init_dm
      imx8: add iomux configuration api
      imx8: add dummy clock
      gpio: mxc_gpio: add support for i.MX8
      pinctrl: Add pinctrl driver for i.MX8
      power: Add power domain driver for i.MX8
      clk: imx: add clk driver for i.MX8QXP
      serial_lpuart: Update lpuart driver to support i.MX8
      serial: lpuart: support uclass clk api
      mmc: fsl_esdhc: add uclass clk support
      arm: dts: introduce dtsi for i.MX8QXP
      imx: add i.MX8QXP MEK board support
      tools: add i.MX8/8X image support
      arm: imx: include imx8image support
      imx: imx8qxp_mek: update to build image in U-Boot
      imx: mkimage: avoid stop CI when required files not exists

Rui Miguel Silva (4):
      imx: mx7: avoid some initialization if low level is skipped
      optee: adjust dependencies and default values for dram
      warp7: include: configs: set skip low level init
      warp7: configs: add bl33 defconfig

Sébastien Szymanski (1):
      ARM: opos6ul: make the board boot again

Xiaoliang Yang (1):
      Kconfig: Convert CONFIG_IMX_WATCHDOG to Kconfig

Ye Li (2):
      serial: lpuart: Enable RX and TX FIFO
      fsl_esdhc: Update usdhc driver to support i.MX8

 arch/arm/Kconfig                                      |   8 +
 arch/arm/Makefile                                     |   2 +-
 arch/arm/dts/Makefile                                 |   2 +
 arch/arm/dts/fsl-imx8-ca35.dtsi                       |  66 +++++++
 arch/arm/dts/fsl-imx8dx.dtsi                          | 499
+++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/fsl-imx8dxp.dtsi                         |  11 ++
 arch/arm/dts/fsl-imx8qxp-mek.dts                      | 246
++++++++++++++++++++++++++
 arch/arm/dts/fsl-imx8qxp.dtsi                         |  51 ++++++
 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi               |  28 +++
 arch/arm/dts/imx6ul-opos6ul.dtsi                      |   2 -
 arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi            |  24 +++
 arch/arm/dts/imx6ul-opos6uldev.dts                    |   2 -
 arch/arm/include/asm/arch-imx/cpu.h                   |   6 +
 arch/arm/include/asm/arch-imx8/clock.h                |  27 +++
 arch/arm/include/asm/arch-imx8/gpio.h                 |  21 +++
 arch/arm/include/asm/arch-imx8/imx-regs.h             |  46 +++++
 arch/arm/include/asm/arch-imx8/imx8-pins.h            |  15 ++
 arch/arm/include/asm/arch-imx8/iomux.h                |  40 +++++
 arch/arm/include/asm/arch-imx8/power-domain.h         |  15 ++
 arch/arm/include/asm/arch-imx8/sci/rpc.h              | 158
+++++++++++++++++
 arch/arm/include/asm/arch-imx8/sci/sci.h              |  88 +++++++++
 arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h     |  30 ++++
 arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h      |  57 ++++++
 arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h       |  44 +++++
 arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h       |  69 ++++++++
 arch/arm/include/asm/arch-imx8/sci/types.h            | 220
+++++++++++++++++++++++
 arch/arm/include/asm/arch-imx8/sys_proto.h            |  19 ++
 arch/arm/include/asm/arch-mx5/clock.h                 |   1 +
 arch/arm/include/asm/armv8/cpu.h                      |  26 +++
 arch/arm/include/asm/global_data.h                    |   4 +
 arch/arm/include/asm/mach-imx/boot_mode.h             |   1 +
 arch/arm/include/asm/mach-imx/sys_proto.h             |   3 +
 arch/arm/mach-imx/Makefile                            |  26 ++-
 arch/arm/mach-imx/imx8/Kconfig                        |  26 +++
 arch/arm/mach-imx/imx8/Makefile                       |   7 +
 arch/arm/mach-imx/imx8/clock.c                        |  21 +++
 arch/arm/mach-imx/imx8/cpu.c                          | 646
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/imx8/iomux.c                        |  43 +++++
 arch/arm/mach-imx/mx5/Kconfig                         |   6 +
 arch/arm/mach-imx/mx5/clock.c                         |  29 +++
 arch/arm/mach-imx/mx7/ddr.c                           |   4 +
 arch/arm/mach-imx/mx7/soc.c                           |   2 +
 arch/arm/mach-imx/syscounter.c                        |   2 +
 board/freescale/imx8qxp_mek/Kconfig                   |  14 ++
 board/freescale/imx8qxp_mek/MAINTAINERS               |   6 +
 board/freescale/imx8qxp_mek/Makefile                  |   7 +
 board/freescale/imx8qxp_mek/README                    |  55 ++++++
 board/freescale/imx8qxp_mek/imx8qxp_mek.c             | 170
++++++++++++++++++
 board/freescale/imx8qxp_mek/imximage.cfg              |  25 +++
 board/freescale/mx8mq_evk/README                      |  81 +++++++++
 board/ge/bx50v3/MAINTAINERS                           |   2 +-
 board/ge/bx50v3/bx50v3.c                              |  38 ++--
 board/menlo/m53menlo/Kconfig                          |  15 ++
 board/menlo/m53menlo/MAINTAINERS                      |   7 +
 board/menlo/m53menlo/Makefile                         |   9 +
 board/menlo/m53menlo/imximage.cfg                     |  91 ++++++++++
 board/menlo/m53menlo/m53menlo.c                       | 513
+++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/technexion/pico-imx7d/pico-imx7d.c              |  29 ++-
 board/toradex/colibri_imx7/colibri_imx7.c             |   2 +-
 board/warp7/MAINTAINERS                               |   1 +
 common/image.c                                        |   1 +
 configs/aristainetos2_defconfig                       |   1 +
 configs/aristainetos2b_defconfig                      |   1 +
 configs/aristainetos_defconfig                        |   1 +
 configs/dh_imx6_defconfig                             |   1 +
 configs/display5_defconfig                            |   1 +
 configs/display5_factory_defconfig                    |   1 +
 configs/ge_bx50v3_defconfig                           |   1 +
 configs/imx8qxp_mek_defconfig                         |  52 ++++++
 configs/kp_imx6q_tpc_defconfig                        |   1 +
 configs/m53menlo_defconfig                            |  60 +++++++
 configs/mx53ppd_defconfig                             |   1 +
 configs/pico-hobbit-imx7d_defconfig                   |   1 -
 configs/pico-imx7d_defconfig                          |   1 -
 configs/pico-pi-imx7d_defconfig                       |   1 -
 configs/tqma6s_wru4_mmc_defconfig                     |   1 +
 configs/warp7_bl33_defconfig                          |  42 +++++
 configs/warp7_defconfig                               |   2 +
 configs/warp_defconfig                                |   1 +
 doc/{README.imx25 => imx/common/imx25.txt}            |   0
 doc/{README.imx27 => imx/common/imx27.txt}            |   0
 doc/{README.imx5 => imx/common/imx5.txt}              |   0
 doc/{README.imx6 => imx/common/imx6.txt}              |  25 ---
 doc/{README.mxs => imx/common/mxs.txt}                |   0
 doc/imx/hab/habv4/encrypted_boot.txt                  |  43 +++++
 doc/{README.mxc_hab => imx/hab/habv4/secure_boot.txt} |  44 -----
 doc/{README.sdp => imx/misc/sdp.txt}                  |  22 ++-
 doc/{README.imximage => imx/mkimage/imximage.txt}     |   0
 doc/{README.mxsimage => imx/mkimage/mxsimage.txt}     |   0
 drivers/clk/Kconfig                                   |   1 +
 drivers/clk/Makefile                                  |   1 +
 drivers/clk/imx/Kconfig                               |   6 +
 drivers/clk/imx/Makefile                              |   5 +
 drivers/clk/imx/clk-imx8.c                            | 393
+++++++++++++++++++++++++++++++++++++++++
 drivers/gpio/mxc_gpio.c                               |  30 +++-
 drivers/i2c/imx_lpi2c.c                               |   4 +-
 drivers/misc/Makefile                                 |   1 +
 drivers/misc/imx8/Makefile                            |   3 +
 drivers/misc/imx8/scu.c                               | 266
++++++++++++++++++++++++++++
 drivers/misc/imx8/scu_api.c                           | 367
++++++++++++++++++++++++++++++++++++++
 drivers/mmc/fsl_esdhc.c                               |  34 +++-
 drivers/pinctrl/nxp/Kconfig                           |  18 ++
 drivers/pinctrl/nxp/Makefile                          |   2 +
 drivers/pinctrl/nxp/pinctrl-imx.c                     | 209
++++++++++++----------
 drivers/pinctrl/nxp/pinctrl-imx.h                     |  16 ++
 drivers/pinctrl/nxp/pinctrl-imx8.c                    |  40 +++++
 drivers/pinctrl/nxp/pinctrl-scu.c                     |  66 +++++++
 drivers/power/domain/Kconfig                          |   8 +-
 drivers/power/domain/Makefile                         |   1 +
 drivers/power/domain/imx8-power-domain.c              | 315
+++++++++++++++++++++++++++++++++
 drivers/serial/serial_lpuart.c                        | 143 ++++++++++++---
 drivers/serial/serial_mxc.c                           |   1 +
 drivers/watchdog/Kconfig                              |   7 +
 include/configs/aristainetos-common.h                 |   3 -
 include/configs/cl-som-imx7.h                         |   2 -
 include/configs/colibri-imx6ull.h                     |   1 -
 include/configs/colibri_imx7.h                        |   3 -
 include/configs/dh_imx6.h                             |   2 -
 include/configs/display5.h                            |   2 -
 include/configs/ge_bx50v3.h                           |   2 -
 include/configs/imx8qxp_mek.h                         | 157
+++++++++++++++++
 include/configs/kp_imx6q_tpc.h                        |   2 -
 include/configs/m53menlo.h                            | 246
++++++++++++++++++++++++++
 include/configs/mx53ppd.h                             |   2 -
 include/configs/mx7dsabresd.h                         |   1 -
 include/configs/pico-imx6ul.h                         |   6 +-
 include/configs/pico-imx7d.h                          |   6 +-
 include/configs/tqma6_wru4.h                          |   2 -
 include/configs/warp.h                                |   2 -
 include/configs/warp7.h                               |  11 ++
 include/dt-bindings/clock/imx8qxp-clock.h             | 583
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/dt-bindings/pinctrl/pads-imx8qxp.h            | 757
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/dt-bindings/soc/imx8_pd.h                     | 188
++++++++++++++++++++
 include/dt-bindings/soc/imx_rsrc.h                    | 557
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/fsl_lpuart.h                                  |   2 +-
 include/image.h                                       |   1 +
 include/imx8image.h                                   | 273
++++++++++++++++++++++++++++
 lib/optee/Kconfig                                     |   8 +-
 scripts/config_whitelist.txt                          |   2 -
 tools/Makefile                                        |   1 +
 tools/imagetool.h                                     |   1 +
 tools/imx8_cntr_image.sh                              |  32 ++++
 tools/imx8image.c                                     | 961
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 tools/mkimage.c                                       |   7 +
 144 files changed, 9491 insertions(+), 282 deletions(-)
 create mode 100644 arch/arm/dts/fsl-imx8-ca35.dtsi
 create mode 100644 arch/arm/dts/fsl-imx8dx.dtsi
 create mode 100644 arch/arm/dts/fsl-imx8dxp.dtsi
 create mode 100644 arch/arm/dts/fsl-imx8qxp-mek.dts
 create mode 100644 arch/arm/dts/fsl-imx8qxp.dtsi
 create mode 100644 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
 create mode 100644 arch/arm/include/asm/arch-imx8/clock.h
 create mode 100644 arch/arm/include/asm/arch-imx8/gpio.h
 create mode 100644 arch/arm/include/asm/arch-imx8/imx-regs.h
 create mode 100644 arch/arm/include/asm/arch-imx8/imx8-pins.h
 create mode 100644 arch/arm/include/asm/arch-imx8/iomux.h
 create mode 100644 arch/arm/include/asm/arch-imx8/power-domain.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/rpc.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/sci.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/types.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sys_proto.h
 create mode 100644 arch/arm/include/asm/armv8/cpu.h
 create mode 100644 arch/arm/mach-imx/imx8/Kconfig
 create mode 100644 arch/arm/mach-imx/imx8/Makefile
 create mode 100644 arch/arm/mach-imx/imx8/clock.c
 create mode 100644 arch/arm/mach-imx/imx8/cpu.c
 create mode 100644 arch/arm/mach-imx/imx8/iomux.c
 create mode 100644 board/freescale/imx8qxp_mek/Kconfig
 create mode 100644 board/freescale/imx8qxp_mek/MAINTAINERS
 create mode 100644 board/freescale/imx8qxp_mek/Makefile
 create mode 100644 board/freescale/imx8qxp_mek/README
 create mode 100644 board/freescale/imx8qxp_mek/imx8qxp_mek.c
 create mode 100644 board/freescale/imx8qxp_mek/imximage.cfg
 create mode 100644 board/freescale/mx8mq_evk/README
 create mode 100644 board/menlo/m53menlo/Kconfig
 create mode 100644 board/menlo/m53menlo/MAINTAINERS
 create mode 100644 board/menlo/m53menlo/Makefile
 create mode 100644 board/menlo/m53menlo/imximage.cfg
 create mode 100644 board/menlo/m53menlo/m53menlo.c
 create mode 100644 configs/imx8qxp_mek_defconfig
 create mode 100644 configs/m53menlo_defconfig
 create mode 100644 configs/warp7_bl33_defconfig
 rename doc/{README.imx25 => imx/common/imx25.txt} (100%)
 rename doc/{README.imx27 => imx/common/imx27.txt} (100%)
 rename doc/{README.imx5 => imx/common/imx5.txt} (100%)
 rename doc/{README.imx6 => imx/common/imx6.txt} (73%)
 rename doc/{README.mxs => imx/common/mxs.txt} (100%)
 create mode 100644 doc/imx/hab/habv4/encrypted_boot.txt
 rename doc/{README.mxc_hab => imx/hab/habv4/secure_boot.txt} (68%)
 rename doc/{README.sdp => imx/misc/sdp.txt} (82%)
 rename doc/{README.imximage => imx/mkimage/imximage.txt} (100%)
 rename doc/{README.mxsimage => imx/mkimage/mxsimage.txt} (100%)
 create mode 100644 drivers/clk/imx/Kconfig
 create mode 100644 drivers/clk/imx/Makefile
 create mode 100644 drivers/clk/imx/clk-imx8.c
 create mode 100644 drivers/misc/imx8/Makefile
 create mode 100644 drivers/misc/imx8/scu.c
 create mode 100644 drivers/misc/imx8/scu_api.c
 create mode 100644 drivers/pinctrl/nxp/pinctrl-imx8.c
 create mode 100644 drivers/pinctrl/nxp/pinctrl-scu.c
 create mode 100644 drivers/power/domain/imx8-power-domain.c
 create mode 100644 include/configs/imx8qxp_mek.h
 create mode 100644 include/configs/m53menlo.h
 create mode 100644 include/dt-bindings/clock/imx8qxp-clock.h
 create mode 100644 include/dt-bindings/pinctrl/pads-imx8qxp.h
 create mode 100644 include/dt-bindings/soc/imx8_pd.h
 create mode 100644 include/dt-bindings/soc/imx_rsrc.h
 create mode 100644 include/imx8image.h
 create mode 100755 tools/imx8_cntr_image.sh
 create mode 100644 tools/imx8image.c

On 23/10/18 16:52, Tom Rini wrote:
> On Tue, Oct 23, 2018 at 04:42:53PM +0200, Stefano Babic wrote:
>> Hi Tom,
>>
>> On 23/10/18 16:29, Tom Rini wrote:
>>> On Tue, Oct 23, 2018 at 09:52:58AM +0200, Stefano Babic wrote:
>>>
>>>> Hi Tom,
>>>>
>>>> please pull from u-boot-imx (tag: u-boot-imx-20181023) thanks !
>>>>
>>>> The tree contains fixes for i.MX6 and improvement in docs, but the most
>>>> important part is the introduction of the i.MX8 architecture (thanks to
>>>> Peng and Antolji for their work !). Build on Travis reported no error,
>>>> but I get a build issue with the VF610 boards - this will be require a
>>>> fix in next days. i.MX8 can be built following exactly the instruction
>>>> of the README file (NXP firmware requires to acknowledge the EULA).
>>>
>>> I know the i.MX8 stuff has been kicking around for a while so.. OK, yes,
>>> I won't be too upset about pushing it so late in the cycle.  But, my
>>> travis builds do see an error:
>>> https://travis-ci.org/trini/u-boot/jobs/445069389#L1038 which is "Fail
>>> open first container file ahab-container.img" for imx8qxp_mek and I also
>>> see that locally.
>>
>> I know: to build i.MX8, we need to download external firmware. In fact,
>> we have to provide the files according to board/freescale/mx8mq_evk/README.
>>
>> Near "imx-atf" (this is not a problem, loaded and built), we need two
>> additional "closed" firmware, that is firmware-imx (currently, 7.6) and
>> imx-sc-firmware. They can be downloaded but they underly the acknowledge
>> of NXP's EULA. They are self extracting scripts and we could hack it to
>> have an automatic build, but I *guess* this breaks the license. I do not
>> know if we are allowed to do this, and both of these firmwares do not
>> provide a way to "implicitely" skip the EULA as we do in OE by setting a
>> variable in local.conf.
>>
>>>  This feels like the same class of error that we have
>>> to deal with on other AArch64 platforms, namely of throwing a user
>>> visible error that what they just built will not boot due to lack of
>>> other files.
>>
>> I am unsure: mkimage packs all files together as part of the build, when
>> they are available. User cannot even try to boot, because the build
>> stops if these files are not available. The error at mkimage step is
>> saying us that build is not complete due to missing files (atf,
>> firmware-imx and imx-sc-firmware).
> 
> Yup, this is the same problem we have in other platforms.  Take a look
> at board/sunxi/mksunxi_fit_atf.sh or tools/k3_fit_atf.sh for what we do
> on some other platforms so that CI build completes but it's clear to the
> end user that the binary will not work and what they need to do / read
> to get a functional build.  There's also
> arch/arm/mach-omap2/config_secure.mk as an example of all the fun we
> have for building the secure TI platforms that more closely follow the
> problem you have here, namely of needing EULA'd packages (and in those
> cases, also NDA, iirc) installed to complete a functional build.  I
> think you'll need to do something closer to the xxxx_fit_atf.sh scripts
> in this case, to check for required blobs and if not found, not call
> mkimage and echo something loud and visible to the user.
> 

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-10-23 14:42   ` Stefano Babic
@ 2018-10-23 14:52     ` Tom Rini
  2018-10-24 13:38       ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2018-10-23 14:52 UTC (permalink / raw)
  To: u-boot

On Tue, Oct 23, 2018 at 04:42:53PM +0200, Stefano Babic wrote:
> Hi Tom,
> 
> On 23/10/18 16:29, Tom Rini wrote:
> > On Tue, Oct 23, 2018 at 09:52:58AM +0200, Stefano Babic wrote:
> > 
> >> Hi Tom,
> >>
> >> please pull from u-boot-imx (tag: u-boot-imx-20181023) thanks !
> >>
> >> The tree contains fixes for i.MX6 and improvement in docs, but the most
> >> important part is the introduction of the i.MX8 architecture (thanks to
> >> Peng and Antolji for their work !). Build on Travis reported no error,
> >> but I get a build issue with the VF610 boards - this will be require a
> >> fix in next days. i.MX8 can be built following exactly the instruction
> >> of the README file (NXP firmware requires to acknowledge the EULA).
> > 
> > I know the i.MX8 stuff has been kicking around for a while so.. OK, yes,
> > I won't be too upset about pushing it so late in the cycle.  But, my
> > travis builds do see an error:
> > https://travis-ci.org/trini/u-boot/jobs/445069389#L1038 which is "Fail
> > open first container file ahab-container.img" for imx8qxp_mek and I also
> > see that locally.
> 
> I know: to build i.MX8, we need to download external firmware. In fact,
> we have to provide the files according to board/freescale/mx8mq_evk/README.
> 
> Near "imx-atf" (this is not a problem, loaded and built), we need two
> additional "closed" firmware, that is firmware-imx (currently, 7.6) and
> imx-sc-firmware. They can be downloaded but they underly the acknowledge
> of NXP's EULA. They are self extracting scripts and we could hack it to
> have an automatic build, but I *guess* this breaks the license. I do not
> know if we are allowed to do this, and both of these firmwares do not
> provide a way to "implicitely" skip the EULA as we do in OE by setting a
> variable in local.conf.
> 
> >  This feels like the same class of error that we have
> > to deal with on other AArch64 platforms, namely of throwing a user
> > visible error that what they just built will not boot due to lack of
> > other files.
> 
> I am unsure: mkimage packs all files together as part of the build, when
> they are available. User cannot even try to boot, because the build
> stops if these files are not available. The error at mkimage step is
> saying us that build is not complete due to missing files (atf,
> firmware-imx and imx-sc-firmware).

Yup, this is the same problem we have in other platforms.  Take a look
at board/sunxi/mksunxi_fit_atf.sh or tools/k3_fit_atf.sh for what we do
on some other platforms so that CI build completes but it's clear to the
end user that the binary will not work and what they need to do / read
to get a functional build.  There's also
arch/arm/mach-omap2/config_secure.mk as an example of all the fun we
have for building the secure TI platforms that more closely follow the
problem you have here, namely of needing EULA'd packages (and in those
cases, also NDA, iirc) installed to complete a functional build.  I
think you'll need to do something closer to the xxxx_fit_atf.sh scripts
in this case, to check for required blobs and if not found, not call
mkimage and echo something loud and visible to the user.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181023/e847ad0e/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-10-23 14:29 ` Tom Rini
@ 2018-10-23 14:42   ` Stefano Babic
  2018-10-23 14:52     ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-10-23 14:42 UTC (permalink / raw)
  To: u-boot

Hi Tom,

On 23/10/18 16:29, Tom Rini wrote:
> On Tue, Oct 23, 2018 at 09:52:58AM +0200, Stefano Babic wrote:
> 
>> Hi Tom,
>>
>> please pull from u-boot-imx (tag: u-boot-imx-20181023) thanks !
>>
>> The tree contains fixes for i.MX6 and improvement in docs, but the most
>> important part is the introduction of the i.MX8 architecture (thanks to
>> Peng and Antolji for their work !). Build on Travis reported no error,
>> but I get a build issue with the VF610 boards - this will be require a
>> fix in next days. i.MX8 can be built following exactly the instruction
>> of the README file (NXP firmware requires to acknowledge the EULA).
> 
> I know the i.MX8 stuff has been kicking around for a while so.. OK, yes,
> I won't be too upset about pushing it so late in the cycle.  But, my
> travis builds do see an error:
> https://travis-ci.org/trini/u-boot/jobs/445069389#L1038 which is "Fail
> open first container file ahab-container.img" for imx8qxp_mek and I also
> see that locally.

I know: to build i.MX8, we need to download external firmware. In fact,
we have to provide the files according to board/freescale/mx8mq_evk/README.

Near "imx-atf" (this is not a problem, loaded and built), we need two
additional "closed" firmware, that is firmware-imx (currently, 7.6) and
imx-sc-firmware. They can be downloaded but they underly the acknowledge
of NXP's EULA. They are self extracting scripts and we could hack it to
have an automatic build, but I *guess* this breaks the license. I do not
know if we are allowed to do this, and both of these firmwares do not
provide a way to "implicitely" skip the EULA as we do in OE by setting a
variable in local.conf.

>  This feels like the same class of error that we have
> to deal with on other AArch64 platforms, namely of throwing a user
> visible error that what they just built will not boot due to lack of
> other files.

I am unsure: mkimage packs all files together as part of the build, when
they are available. User cannot even try to boot, because the build
stops if these files are not available. The error at mkimage step is
saying us that build is not complete due to missing files (atf,
firmware-imx and imx-sc-firmware).

> 
> Also:
> $ ./tools/genboardscfg.py -o /dev/null
> WARNING: no status info for 'warp7_bl33'
> WARNING: no maintainers for 'warp7_bl33'

I have not seen, thanks, this must be fixed.

> 
> which I would have just fixed-up, but since we need to address that
> imx8qxp_mek problem, please update the appropriate MAINTAINERS file too
> for warp7_bl33.  Thanks!

Regards,
Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-10-23  7:52 Stefano Babic
@ 2018-10-23 14:29 ` Tom Rini
  2018-10-23 14:42   ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2018-10-23 14:29 UTC (permalink / raw)
  To: u-boot

On Tue, Oct 23, 2018 at 09:52:58AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx (tag: u-boot-imx-20181023) thanks !
> 
> The tree contains fixes for i.MX6 and improvement in docs, but the most
> important part is the introduction of the i.MX8 architecture (thanks to
> Peng and Antolji for their work !). Build on Travis reported no error,
> but I get a build issue with the VF610 boards - this will be require a
> fix in next days. i.MX8 can be built following exactly the instruction
> of the README file (NXP firmware requires to acknowledge the EULA).

I know the i.MX8 stuff has been kicking around for a while so.. OK, yes,
I won't be too upset about pushing it so late in the cycle.  But, my
travis builds do see an error:
https://travis-ci.org/trini/u-boot/jobs/445069389#L1038 which is "Fail
open first container file ahab-container.img" for imx8qxp_mek and I also
see that locally.  This feels like the same class of error that we have
to deal with on other AArch64 platforms, namely of throwing a user
visible error that what they just built will not boot due to lack of
other files.

Also:
$ ./tools/genboardscfg.py -o /dev/null
WARNING: no status info for 'warp7_bl33'
WARNING: no maintainers for 'warp7_bl33'

which I would have just fixed-up, but since we need to address that
imx8qxp_mek problem, please update the appropriate MAINTAINERS file too
for warp7_bl33.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181023/4db53b9f/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-10-23  7:52 Stefano Babic
  2018-10-23 14:29 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-10-23  7:52 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx (tag: u-boot-imx-20181023) thanks !

The tree contains fixes for i.MX6 and improvement in docs, but the most
important part is the introduction of the i.MX8 architecture (thanks to
Peng and Antolji for their work !). Build on Travis reported no error,
but I get a build issue with the VF610 boards - this will be require a
fix in next days. i.MX8 can be built following exactly the instruction
of the README file (NXP firmware requires to acknowledge the EULA).

The following changes since commit 0a60a81ba3860946551cb79aa6486aa076e357f3:

  Kconfig: sandbox: enable cmd_avb and dependencies (2018-10-07 13:34:19
-0400)

are available in the Git repository at:

  git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181023

for you to fetch changes up to 4684fa8bdd7bb38ef54cc4c60ec12c649536f288:

  serial: mxc: Add match string for i.mx6 quad/dual lite serial
(2018-10-22 18:56:17 +0200)

----------------------------------------------------------------
Merged imx8 architecture + fixes for mx6

----------------------------------------------------------------
Anatolij Gustschin (3):
      imx8: cpu: add function for reading FEC MAC from fuse
      imx8: cpu: add uclass based CPU driver
      i2c: imx_lpi2c: fix typo and register base address format

Bernhard Messerklinger (1):
      serial: mxc: Add match string for i.mx6 quad/dual lite serial

Breno Matheus Lima (7):
      doc: imx: reorganize i.MX documentation
      doc: imx: Move SPD related info to the appropriate doc
      doc: imx: mkimage: reorganize i.MX mkimage documentation
      doc: imx: Reorganize i.MX SoC common documentation
      doc: imx: hab: Reorganize High Assurance Boot documentation
      doc: imx: misc: Reorganize miscellaneous documentation
      doc: imx: Improve i.MX documentation naming

Dan Cimpoca (1):
      board: ge: bx50v3: fix initialization of i2c bus0

Fabien Lahoudere (1):
      board: ge: bx50v3: Change maintainer

Fabio Estevam (4):
      pico-imx7d: Make SPL binary fit into 64kB
      pico-imx7d: Add USB Host support
      colibri_imx7: prime get_ram_size() using imx_ddr_size()
      configs: mx7: Remove CONFIG_DBG_MONITOR

Ian Ray (2):
      board: ge: bx50v3: correct LDB clock
      board: ge: bx50v3: b{4,6}50v3 modeline

Marcel Ziswiler (1):
      imx: mx7: fix potential overflow in imx_ddr_size()

Marek Vasut (3):
      arm: imx: mx5: Make videoskip available on MX5
      arm: mx5: Add LDB clock config code
      arm: mx5: Add M53Menlo board

Otavio Salvador (2):
      pico-imx6ul, pico-imx7d: Use eMMC user partition by default
      pico-imx6ul, pico-imx7d: Enable USB and PXE boot support

Peng Fan (33):
      dt-bindings: pinctrl: add i.MX8QXP pads definition
      dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QXP clocks
definition
      dt-bindings: soc: add i.MX8QXP pm and rsrc definition
      imx8: add scfw macro definition
      imx: add Kconfig entry for i.MX8QXP
      arm: build mach-imx for i.MX8
      arm: global_data: add scu_dev for i.MX8
      misc: add i.MX8 misc driver
      misc: imx8: add scfw api impementation
      imx: boot_mode: Add FLEXSPI boot entry
      imx8: add imx-regs header file
      imx8: pins: include i.MX8QXP pin header when CONFIG_IMX8QXP defined
      imx: add i.MX8 cpu type
      armv8: add cpu core helper functions
      imx8: add basic cpu support
      imx8: add boot device detection
      imx8: implement mmc_get_env_dev
      imx8: add mmu and dram related functions
      imx8: add arch_cpu_init arch_cpu_init_dm
      imx8: add iomux configuration api
      imx8: add dummy clock
      gpio: mxc_gpio: add support for i.MX8
      pinctrl: Add pinctrl driver for i.MX8
      power: Add power domain driver for i.MX8
      clk: imx: add clk driver for i.MX8QXP
      serial_lpuart: Update lpuart driver to support i.MX8
      serial: lpuart: support uclass clk api
      mmc: fsl_esdhc: add uclass clk support
      arm: dts: introduce dtsi for i.MX8QXP
      imx: add i.MX8QXP MEK board support
      tools: add i.MX8/8X image support
      arm: imx: include imx8image support
      imx: imx8qxp_mek: update to build image in U-Boot

Rui Miguel Silva (4):
      imx: mx7: avoid some initialization if low level is skipped
      optee: adjust dependencies and default values for dram
      warp7: include: configs: set skip low level init
      warp7: configs: add bl33 defconfig

Sébastien Szymanski (1):
      ARM: opos6ul: make the board boot again

Xiaoliang Yang (1):
      Kconfig: Convert CONFIG_IMX_WATCHDOG to Kconfig

Ye Li (2):
      serial: lpuart: Enable RX and TX FIFO
      fsl_esdhc: Update usdhc driver to support i.MX8

 arch/arm/Kconfig                                      |   8 +
 arch/arm/Makefile                                     |   2 +-
 arch/arm/dts/Makefile                                 |   2 +
 arch/arm/dts/fsl-imx8-ca35.dtsi                       |  66 +++++++
 arch/arm/dts/fsl-imx8dx.dtsi                          | 499
+++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/fsl-imx8dxp.dtsi                         |  11 ++
 arch/arm/dts/fsl-imx8qxp-mek.dts                      | 246
++++++++++++++++++++++++++
 arch/arm/dts/fsl-imx8qxp.dtsi                         |  51 ++++++
 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi               |  28 +++
 arch/arm/dts/imx6ul-opos6ul.dtsi                      |   2 -
 arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi            |  24 +++
 arch/arm/dts/imx6ul-opos6uldev.dts                    |   2 -
 arch/arm/include/asm/arch-imx/cpu.h                   |   6 +
 arch/arm/include/asm/arch-imx8/clock.h                |  27 +++
 arch/arm/include/asm/arch-imx8/gpio.h                 |  21 +++
 arch/arm/include/asm/arch-imx8/imx-regs.h             |  46 +++++
 arch/arm/include/asm/arch-imx8/imx8-pins.h            |  15 ++
 arch/arm/include/asm/arch-imx8/iomux.h                |  40 +++++
 arch/arm/include/asm/arch-imx8/power-domain.h         |  15 ++
 arch/arm/include/asm/arch-imx8/sci/rpc.h              | 158
+++++++++++++++++
 arch/arm/include/asm/arch-imx8/sci/sci.h              |  88 ++++++++++
 arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h     |  30 ++++
 arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h      |  57 ++++++
 arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h       |  44 +++++
 arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h       |  69 ++++++++
 arch/arm/include/asm/arch-imx8/sci/types.h            | 220
++++++++++++++++++++++++
 arch/arm/include/asm/arch-imx8/sys_proto.h            |  19 ++
 arch/arm/include/asm/arch-mx5/clock.h                 |   1 +
 arch/arm/include/asm/armv8/cpu.h                      |  26 +++
 arch/arm/include/asm/global_data.h                    |   4 +
 arch/arm/include/asm/mach-imx/boot_mode.h             |   1 +
 arch/arm/include/asm/mach-imx/sys_proto.h             |   3 +
 arch/arm/mach-imx/Makefile                            |  22 ++-
 arch/arm/mach-imx/imx8/Kconfig                        |  26 +++
 arch/arm/mach-imx/imx8/Makefile                       |   7 +
 arch/arm/mach-imx/imx8/clock.c                        |  21 +++
 arch/arm/mach-imx/imx8/cpu.c                          | 646
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/imx8/iomux.c                        |  43 +++++
 arch/arm/mach-imx/mx5/Kconfig                         |   6 +
 arch/arm/mach-imx/mx5/clock.c                         |  29 ++++
 arch/arm/mach-imx/mx7/ddr.c                           |   4 +
 arch/arm/mach-imx/mx7/soc.c                           |   2 +
 arch/arm/mach-imx/syscounter.c                        |   2 +
 board/freescale/imx8qxp_mek/Kconfig                   |  14 ++
 board/freescale/imx8qxp_mek/MAINTAINERS               |   6 +
 board/freescale/imx8qxp_mek/Makefile                  |   7 +
 board/freescale/imx8qxp_mek/README                    |  55 ++++++
 board/freescale/imx8qxp_mek/imx8qxp_mek.c             | 170
++++++++++++++++++
 board/freescale/imx8qxp_mek/imximage.cfg              |  25 +++
 board/freescale/mx8mq_evk/README                      |  81 +++++++++
 board/ge/bx50v3/MAINTAINERS                           |   2 +-
 board/ge/bx50v3/bx50v3.c                              |  38 ++--
 board/menlo/m53menlo/Kconfig                          |  15 ++
 board/menlo/m53menlo/MAINTAINERS                      |   7 +
 board/menlo/m53menlo/Makefile                         |   9 +
 board/menlo/m53menlo/imximage.cfg                     |  91 ++++++++++
 board/menlo/m53menlo/m53menlo.c                       | 513
++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/technexion/pico-imx7d/pico-imx7d.c              |  29 +++-
 board/toradex/colibri_imx7/colibri_imx7.c             |   2 +-
 common/image.c                                        |   1 +
 configs/aristainetos2_defconfig                       |   1 +
 configs/aristainetos2b_defconfig                      |   1 +
 configs/aristainetos_defconfig                        |   1 +
 configs/dh_imx6_defconfig                             |   1 +
 configs/display5_defconfig                            |   1 +
 configs/display5_factory_defconfig                    |   1 +
 configs/ge_bx50v3_defconfig                           |   1 +
 configs/imx8qxp_mek_defconfig                         |  52 ++++++
 configs/kp_imx6q_tpc_defconfig                        |   1 +
 configs/m53menlo_defconfig                            |  60 +++++++
 configs/mx53ppd_defconfig                             |   1 +
 configs/pico-hobbit-imx7d_defconfig                   |   1 -
 configs/pico-imx7d_defconfig                          |   1 -
 configs/pico-pi-imx7d_defconfig                       |   1 -
 configs/tqma6s_wru4_mmc_defconfig                     |   1 +
 configs/warp7_bl33_defconfig                          |  42 +++++
 configs/warp7_defconfig                               |   2 +
 configs/warp_defconfig                                |   1 +
 doc/{README.imx25 => imx/common/imx25.txt}            |   0
 doc/{README.imx27 => imx/common/imx27.txt}            |   0
 doc/{README.imx5 => imx/common/imx5.txt}              |   0
 doc/{README.imx6 => imx/common/imx6.txt}              |  25 ---
 doc/{README.mxs => imx/common/mxs.txt}                |   0
 doc/imx/hab/habv4/encrypted_boot.txt                  |  43 +++++
 doc/{README.mxc_hab => imx/hab/habv4/secure_boot.txt} |  44 -----
 doc/{README.sdp => imx/misc/sdp.txt}                  |  22 ++-
 doc/{README.imximage => imx/mkimage/imximage.txt}     |   0
 doc/{README.mxsimage => imx/mkimage/mxsimage.txt}     |   0
 drivers/clk/Kconfig                                   |   1 +
 drivers/clk/Makefile                                  |   1 +
 drivers/clk/imx/Kconfig                               |   6 +
 drivers/clk/imx/Makefile                              |   5 +
 drivers/clk/imx/clk-imx8.c                            | 393
++++++++++++++++++++++++++++++++++++++++++
 drivers/gpio/mxc_gpio.c                               |  30 +++-
 drivers/i2c/imx_lpi2c.c                               |   4 +-
 drivers/misc/Makefile                                 |   1 +
 drivers/misc/imx8/Makefile                            |   3 +
 drivers/misc/imx8/scu.c                               | 266
++++++++++++++++++++++++++++
 drivers/misc/imx8/scu_api.c                           | 367
+++++++++++++++++++++++++++++++++++++++
 drivers/mmc/fsl_esdhc.c                               |  34 +++-
 drivers/pinctrl/nxp/Kconfig                           |  18 ++
 drivers/pinctrl/nxp/Makefile                          |   2 +
 drivers/pinctrl/nxp/pinctrl-imx.c                     | 209
++++++++++++----------
 drivers/pinctrl/nxp/pinctrl-imx.h                     |  16 ++
 drivers/pinctrl/nxp/pinctrl-imx8.c                    |  40 +++++
 drivers/pinctrl/nxp/pinctrl-scu.c                     |  66 +++++++
 drivers/power/domain/Kconfig                          |   8 +-
 drivers/power/domain/Makefile                         |   1 +
 drivers/power/domain/imx8-power-domain.c              | 315
++++++++++++++++++++++++++++++++++
 drivers/serial/serial_lpuart.c                        | 143
++++++++++++----
 drivers/serial/serial_mxc.c                           |   1 +
 drivers/watchdog/Kconfig                              |   7 +
 include/configs/aristainetos-common.h                 |   3 -
 include/configs/cl-som-imx7.h                         |   2 -
 include/configs/colibri-imx6ull.h                     |   1 -
 include/configs/colibri_imx7.h                        |   3 -
 include/configs/dh_imx6.h                             |   2 -
 include/configs/display5.h                            |   2 -
 include/configs/ge_bx50v3.h                           |   2 -
 include/configs/imx8qxp_mek.h                         | 157
+++++++++++++++++
 include/configs/kp_imx6q_tpc.h                        |   2 -
 include/configs/m53menlo.h                            | 246
++++++++++++++++++++++++++
 include/configs/mx53ppd.h                             |   2 -
 include/configs/mx7dsabresd.h                         |   1 -
 include/configs/pico-imx6ul.h                         |   6 +-
 include/configs/pico-imx7d.h                          |   6 +-
 include/configs/tqma6_wru4.h                          |   2 -
 include/configs/warp.h                                |   2 -
 include/configs/warp7.h                               |  11 ++
 include/dt-bindings/clock/imx8qxp-clock.h             | 583
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/dt-bindings/pinctrl/pads-imx8qxp.h            | 757
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/dt-bindings/soc/imx8_pd.h                     | 188
++++++++++++++++++++
 include/dt-bindings/soc/imx_rsrc.h                    | 557
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/fsl_lpuart.h                                  |   2 +-
 include/image.h                                       |   1 +
 include/imx8image.h                                   | 273
+++++++++++++++++++++++++++++
 lib/optee/Kconfig                                     |   8 +-
 scripts/config_whitelist.txt                          |   2 -
 tools/Makefile                                        |   1 +
 tools/imagetool.h                                     |   1 +
 tools/imx8image.c                                     | 961
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 tools/mkimage.c                                       |   7 +
 142 files changed, 9454 insertions(+), 282 deletions(-)
 create mode 100644 arch/arm/dts/fsl-imx8-ca35.dtsi
 create mode 100644 arch/arm/dts/fsl-imx8dx.dtsi
 create mode 100644 arch/arm/dts/fsl-imx8dxp.dtsi
 create mode 100644 arch/arm/dts/fsl-imx8qxp-mek.dts
 create mode 100644 arch/arm/dts/fsl-imx8qxp.dtsi
 create mode 100644 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
 create mode 100644 arch/arm/include/asm/arch-imx8/clock.h
 create mode 100644 arch/arm/include/asm/arch-imx8/gpio.h
 create mode 100644 arch/arm/include/asm/arch-imx8/imx-regs.h
 create mode 100644 arch/arm/include/asm/arch-imx8/imx8-pins.h
 create mode 100644 arch/arm/include/asm/arch-imx8/iomux.h
 create mode 100644 arch/arm/include/asm/arch-imx8/power-domain.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/rpc.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/sci.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sci/types.h
 create mode 100644 arch/arm/include/asm/arch-imx8/sys_proto.h
 create mode 100644 arch/arm/include/asm/armv8/cpu.h
 create mode 100644 arch/arm/mach-imx/imx8/Kconfig
 create mode 100644 arch/arm/mach-imx/imx8/Makefile
 create mode 100644 arch/arm/mach-imx/imx8/clock.c
 create mode 100644 arch/arm/mach-imx/imx8/cpu.c
 create mode 100644 arch/arm/mach-imx/imx8/iomux.c
 create mode 100644 board/freescale/imx8qxp_mek/Kconfig
 create mode 100644 board/freescale/imx8qxp_mek/MAINTAINERS
 create mode 100644 board/freescale/imx8qxp_mek/Makefile
 create mode 100644 board/freescale/imx8qxp_mek/README
 create mode 100644 board/freescale/imx8qxp_mek/imx8qxp_mek.c
 create mode 100644 board/freescale/imx8qxp_mek/imximage.cfg
 create mode 100644 board/freescale/mx8mq_evk/README
 create mode 100644 board/menlo/m53menlo/Kconfig
 create mode 100644 board/menlo/m53menlo/MAINTAINERS
 create mode 100644 board/menlo/m53menlo/Makefile
 create mode 100644 board/menlo/m53menlo/imximage.cfg
 create mode 100644 board/menlo/m53menlo/m53menlo.c
 create mode 100644 configs/imx8qxp_mek_defconfig
 create mode 100644 configs/m53menlo_defconfig
 create mode 100644 configs/warp7_bl33_defconfig
 rename doc/{README.imx25 => imx/common/imx25.txt} (100%)
 rename doc/{README.imx27 => imx/common/imx27.txt} (100%)
 rename doc/{README.imx5 => imx/common/imx5.txt} (100%)
 rename doc/{README.imx6 => imx/common/imx6.txt} (73%)
 rename doc/{README.mxs => imx/common/mxs.txt} (100%)
 create mode 100644 doc/imx/hab/habv4/encrypted_boot.txt
 rename doc/{README.mxc_hab => imx/hab/habv4/secure_boot.txt} (68%)
 rename doc/{README.sdp => imx/misc/sdp.txt} (82%)
 rename doc/{README.imximage => imx/mkimage/imximage.txt} (100%)
 rename doc/{README.mxsimage => imx/mkimage/mxsimage.txt} (100%)
 create mode 100644 drivers/clk/imx/Kconfig
 create mode 100644 drivers/clk/imx/Makefile
 create mode 100644 drivers/clk/imx/clk-imx8.c
 create mode 100644 drivers/misc/imx8/Makefile
 create mode 100644 drivers/misc/imx8/scu.c
 create mode 100644 drivers/misc/imx8/scu_api.c
 create mode 100644 drivers/pinctrl/nxp/pinctrl-imx8.c
 create mode 100644 drivers/pinctrl/nxp/pinctrl-scu.c
 create mode 100644 drivers/power/domain/imx8-power-domain.c
 create mode 100644 include/configs/imx8qxp_mek.h
 create mode 100644 include/configs/m53menlo.h
 create mode 100644 include/dt-bindings/clock/imx8qxp-clock.h
 create mode 100644 include/dt-bindings/pinctrl/pads-imx8qxp.h
 create mode 100644 include/dt-bindings/soc/imx8_pd.h
 create mode 100644 include/dt-bindings/soc/imx_rsrc.h
 create mode 100644 include/imx8image.h
 create mode 100644 tools/imx8image.c

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-19 15:16 Stefano Babic
@ 2018-09-20 13:24 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2018-09-20 13:24 UTC (permalink / raw)
  To: u-boot

On Wed, Sep 19, 2018 at 05:16:17PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx with following changes:
> 
> - changes in pico-* boards
> - fix imx6ull pinmux
> 
> Thanks,
> Stefano
> 
> 
> The following changes since commit b57f1895b669e3fbdca486e7c40dfea00f22bb93:
> 
>   Merge git://git.denx.de/u-boot-x86 (2018-09-17 08:04:25 -0400)
> 
> are available in the Git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to f7df8932ccaec97c8c422de8adadb3a0491543ed:
> 
>   pico-imx7d: Add a new defconfig with PICO-Hobbit selected (2018-09-18
> 16:55:21 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180920/41f7a408/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-09-19 15:16 Stefano Babic
  2018-09-20 13:24 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-09-19 15:16 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx with following changes:

- changes in pico-* boards
- fix imx6ull pinmux

Thanks,
Stefano


The following changes since commit b57f1895b669e3fbdca486e7c40dfea00f22bb93:

  Merge git://git.denx.de/u-boot-x86 (2018-09-17 08:04:25 -0400)

are available in the Git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to f7df8932ccaec97c8c422de8adadb3a0491543ed:

  pico-imx7d: Add a new defconfig with PICO-Hobbit selected (2018-09-18
16:55:21 +0200)

----------------------------------------------------------------
Fabio Estevam (8):
      pico-imx6ul: Convert to distro config
      pico-imx6ul: Convert to SPL
      pico-imx6ul: Add fastboot support
      pico-imx6ul: Add bmode support
      pico-imx6ul: Add support for the 512MB module
      pico-imx6ul: Update the README file
      wandboard: README: Include the mx6qp variant in the list
      pico-imx6ul: Add instructions for booting in Falcon mode

Heiko Schocher (1):
      imx: imx6ull: fix pinmux input_val for uart5 rx pin

Lukasz Majewski (4):
      ARM: bootscript: Remove hard-coded rootpath from K+P's tpcboot.cmd
      ARM: bootscript: Replace tftpboot with dhcp when downloading kernel
      ARM: bootscript: Fix the nfsargs and addip in K+P's tpcboot.cmd
      ARM: bootscript: For nfsargs only use rootpath (and remove not
needed serverip)

Otavio Salvador (13):
      pico-imx6ul: Sync defconfig with new changes
      pico-imx6ul: Add bootmenu to choose the baseboard
      pico-imx6ul: Improve default DFU settings
      pico-imx6ul: Sync README with pico-imx7d
      pico-imx6ul: Add new pico-hobbit config
      pico-imx6ul: Remove CONFIG_FSL_USDHC from .h
      pico-imx6ul: Add Falcon mode support
      pico-imx6ul: Fix TechNexion spelling on MAINTAINERS file
      pico-imx6ul: Add PICO-Pi baseboard support
      pico-imx6ul: Add a new defconfig with PICO-Pi selected
      pico-imx7d: Fix TechNexion spelling on MAINTAINERS file
      pico-imx7d: Add PICO-Hobbit baseboard support
      pico-imx7d: Add a new defconfig with PICO-Hobbit selected

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot into master

 arch/arm/include/asm/arch-mx6/mx6ull_pins.h |   2 +-
 arch/arm/mach-imx/mx6/Kconfig               |   1 +
 board/k+p/bootscripts/tpcboot.cmd           |  12 +++-----
 board/technexion/pico-imx6ul/MAINTAINERS    |  12 +++++++-
 board/technexion/pico-imx6ul/Makefile       |   2 +-
 board/technexion/pico-imx6ul/README         | 138
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------
 board/technexion/pico-imx6ul/spl.c          | 144
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/technexion/pico-imx7d/MAINTAINERS     |   9 ++++--
 board/wandboard/README                      |   2 +-
 configs/pico-hobbit-imx6ul_defconfig        |  53
++++++++++++++++++++++++++++++++++
 configs/pico-hobbit-imx7d_defconfig         |  61
+++++++++++++++++++++++++++++++++++++++
 configs/pico-imx6ul_defconfig               |  39 +++++++++++++++----------
 configs/pico-pi-imx6ul_defconfig            |  53
++++++++++++++++++++++++++++++++++
 include/configs/pico-imx6ul.h               | 107
+++++++++++++++++++++++++++++++++-----------------------------------
 include/configs/pico-imx7d.h                |   5 +++-
 15 files changed, 536 insertions(+), 104 deletions(-)
 create mode 100644 board/technexion/pico-imx6ul/spl.c
 create mode 100644 configs/pico-hobbit-imx6ul_defconfig
 create mode 100644 configs/pico-hobbit-imx7d_defconfig
 create mode 100644 configs/pico-pi-imx6ul_defconfig


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-06 15:52           ` Fabio Estevam
@ 2018-09-06 16:28             ` Peter Robinson
  2018-11-13 13:42             ` Ricardo Salveti
  1 sibling, 0 replies; 307+ messages in thread
From: Peter Robinson @ 2018-09-06 16:28 UTC (permalink / raw)
  To: u-boot

> > I tested current master successfully on Hummingboard2 with i.MX6 Solo
> > (SOM rev 1.5):
>
> Thanks for testing.
>
> It seems we need more information from Peter about the regression he reported.
>
> It would be helpful if Peter could run a bisect so that we could
> understand where the regression is coming from.

We're using gcc 8.2 and binutils 2.31 and there have been a few
interesting bits there on some other platforms, I wonder if something
like that is coming along here with the latest toolchains. I'll try
building with Fedora 27 (gcc 7.3.1 / binutils 2.29) to rule them out
first.

P

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-06 15:42         ` Baruch Siach
@ 2018-09-06 15:52           ` Fabio Estevam
  2018-09-06 16:28             ` Peter Robinson
  2018-11-13 13:42             ` Ricardo Salveti
  0 siblings, 2 replies; 307+ messages in thread
From: Fabio Estevam @ 2018-09-06 15:52 UTC (permalink / raw)
  To: u-boot

Hi Baruch,

On Thu, Sep 6, 2018 at 12:42 PM, Baruch Siach <baruch@tkos.co.il> wrote:

> I tested current master successfully on Hummingboard2 with i.MX6 Solo
> (SOM rev 1.5):

Thanks for testing.

It seems we need more information from Peter about the regression he reported.

It would be helpful if Peter could run a bisect so that we could
understand where the regression is coming from.

Thanks

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-06 13:28       ` Fabio Estevam
@ 2018-09-06 15:42         ` Baruch Siach
  2018-09-06 15:52           ` Fabio Estevam
  0 siblings, 1 reply; 307+ messages in thread
From: Baruch Siach @ 2018-09-06 15:42 UTC (permalink / raw)
  To: u-boot

Hi Fabio,

Fabio Estevam writes:
> Hi Peter,
>
> [Adding Jon and Baruch]
>
> On Thu, Sep 6, 2018 at 9:37 AM, Peter Robinson <pbrobinson@gmail.com> wrote:
>
>> It seems like the Wandboard Quad revB I have also works fine so It
>> might just be a regression in the mx6cuboxi target.
>
> I don't have access to a hummingboard2 to investigate it.
>
> Does this issue also happen on a mx6q cuboxi?
>
> Are you able to run a bisect?

I tested current master successfully on Hummingboard2 with i.MX6 Solo
(SOM rev 1.5):

U-Boot SPL 2018.09-rc3-00026-g4cdeda511f80 (Sep 06 2018 - 18:30:30 +0300)
Trying to boot from MMC1


U-Boot 2018.09-rc3-00026-g4cdeda511f80 (Sep 06 2018 - 18:30:30 +0300)

CPU:   Freescale i.MX6SOLO rev1.3 996 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 38C
Reset cause: POR
Board: MX6 HummingBoard2 (som rev 1.5)
DRAM:  512 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
Net:   FEC
Error: FEC address not set.

Hit any key to stop autoboot:  0
=>

... and with i.MX6Q (SOM rev 1.3):

U-Boot SPL 2018.09-rc3-00026-g4cdeda511f80 (Sep 06 2018 - 18:30:30 +0300)
Trying to boot from MMC1


U-Boot 2018.09-rc3-00026-g4cdeda511f80 (Sep 06 2018 - 18:30:30 +0300)

CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 27C
Reset cause: POR
Board: MX6 HummingBoard2
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
Card did not respond to voltage select!
Net:   FEC
Hit any key to stop autoboot:  0
=>

I don't have handy at the moment the exact same combination of HB2 with
i.MX6Q SOM rev 1.5.

I built mx6cuboxi_defconfig with no changes using Linaro GCC 7.3-2018.05.

baruch

--
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-06 12:37     ` Peter Robinson
@ 2018-09-06 13:28       ` Fabio Estevam
  2018-09-06 15:42         ` Baruch Siach
  0 siblings, 1 reply; 307+ messages in thread
From: Fabio Estevam @ 2018-09-06 13:28 UTC (permalink / raw)
  To: u-boot

Hi Peter,

[Adding Jon and Baruch]

On Thu, Sep 6, 2018 at 9:37 AM, Peter Robinson <pbrobinson@gmail.com> wrote:

> It seems like the Wandboard Quad revB I have also works fine so It
> might just be a regression in the mx6cuboxi target.

I don't have access to a hummingboard2 to investigate it.

Does this issue also happen on a mx6q cuboxi?

Are you able to run a bisect?

Thanks

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-06  9:33   ` Stefano Babic
@ 2018-09-06 12:37     ` Peter Robinson
  2018-09-06 13:28       ` Fabio Estevam
  0 siblings, 1 reply; 307+ messages in thread
From: Peter Robinson @ 2018-09-06 12:37 UTC (permalink / raw)
  To: u-boot

Hi Stefano,
> >> a new PR. I dropped the patches causing breakages on PowerPC boards, as
> >> well as the issue on GE boards. It ran on travis successfully.
> >>
> >>
> >> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
> >>
> >>   configs: am57xx: change default board name to beagle_x15 (2018-08-26
> >> 12:26:16 -0400)
> >>
> >> are available in the Git repository at:
> >>
> >>   git://www.denx.de/git/u-boot-imx.git master
> >>
> >> for you to fetch changes up to c1d1543ebc6e1fb026d0d7ac96d865faa7567555:
> >>
> >>   mx7dsabresd: Add the qspi target to the list of supported defconfigs
> >> (2018-09-04 08:47:23 +0200)
> >>
> >> ----------------------------------------------------------------
> >> Alex Kiernan (1):
> >>       Cleanup CONFIG_BOOTDELAY on cl-som-imx7
> >>
> >> Anson Huang (3):
> >>       imx: mx7: psci: improve cpu hotplug flow
> >>       imx: mx7: add gpc initialization for low power mode
> >>       imx: mx7: add system suspend/resume support
> >>
> >> Fabio Estevam (1):
> >>       mx7dsabresd: Add the qspi target to the list of supported defconfigs
> >>
> >> Martin Kaiser (1):
> >>       watchdog: mx25: use the imx_watchdog driver for mx25
> >>
> >> Stefan Agner (2):
> >>       board: toradex: common: fail gracefully on missing NAND chip
> >>       colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support
> >>
> >> Stefano Babic (1):
> >>       imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig
> >>
> >> Ye Li (6):
> >>       imx: imx6sx-sdb: Enable DM QSPI driver
> >>       imx: imx6sx-sabreauto: convert to use DM QSPI driver
> >>       imx: imx7d-sdb: Add DM QSPI support
> >>       dts: imx6ul: Update alias to support DM
> >>       dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
> >>       imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot
> >
> > Are you aware of any issues on some imx6 devices in 2018.09?
>
> No.
>
> > The
> > hummingboard2 (imx6q) hangs for me just after the output below, even
> > with the above PR, it works fine with a imx6sx device (udoo neo). I'm
> > sure I've seen something on the list that might be related but I can't
> > find it.
>
> :-(
>
> >
> > Sorry for picking this up so late in the cycle.
>
> I can just try to test on another mx6q boar if I get enough time, but of
> course this is not a great test.

It seems like the Wandboard Quad revB I have also works fine so It
might just be a regression in the mx6cuboxi target.

P

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-06  9:23 ` Peter Robinson
@ 2018-09-06  9:33   ` Stefano Babic
  2018-09-06 12:37     ` Peter Robinson
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-09-06  9:33 UTC (permalink / raw)
  To: u-boot

Hi Peter,

On 06/09/2018 11:23, Peter Robinson wrote:
> Hi Stefano,
> 
>> a new PR. I dropped the patches causing breakages on PowerPC boards, as
>> well as the issue on GE boards. It ran on travis successfully.
>>
>>
>> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
>>
>>   configs: am57xx: change default board name to beagle_x15 (2018-08-26
>> 12:26:16 -0400)
>>
>> are available in the Git repository at:
>>
>>   git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to c1d1543ebc6e1fb026d0d7ac96d865faa7567555:
>>
>>   mx7dsabresd: Add the qspi target to the list of supported defconfigs
>> (2018-09-04 08:47:23 +0200)
>>
>> ----------------------------------------------------------------
>> Alex Kiernan (1):
>>       Cleanup CONFIG_BOOTDELAY on cl-som-imx7
>>
>> Anson Huang (3):
>>       imx: mx7: psci: improve cpu hotplug flow
>>       imx: mx7: add gpc initialization for low power mode
>>       imx: mx7: add system suspend/resume support
>>
>> Fabio Estevam (1):
>>       mx7dsabresd: Add the qspi target to the list of supported defconfigs
>>
>> Martin Kaiser (1):
>>       watchdog: mx25: use the imx_watchdog driver for mx25
>>
>> Stefan Agner (2):
>>       board: toradex: common: fail gracefully on missing NAND chip
>>       colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support
>>
>> Stefano Babic (1):
>>       imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig
>>
>> Ye Li (6):
>>       imx: imx6sx-sdb: Enable DM QSPI driver
>>       imx: imx6sx-sabreauto: convert to use DM QSPI driver
>>       imx: imx7d-sdb: Add DM QSPI support
>>       dts: imx6ul: Update alias to support DM
>>       dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
>>       imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot
> 
> Are you aware of any issues on some imx6 devices in 2018.09?

No.

> The
> hummingboard2 (imx6q) hangs for me just after the output below, even
> with the above PR, it works fine with a imx6sx device (udoo neo). I'm
> sure I've seen something on the list that might be related but I can't
> find it.

:-(

> 
> Sorry for picking this up so late in the cycle.

I can just try to test on another mx6q boar if I get enough time, but of
course this is not a great test.

Regards,
Stefano

> 
> Peter
> 
> U-Boot SPL 2018.09-rc3 (Sep 05 2018 - 20:28:15 +0000)
> Trying to boot from MMC1
> 
> 
> U-Boot 2018.09-rc3 (Sep 05 2018 - 20:28:15 +0000)
> 
> CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
> CPU:   Extended Commercial temperature grade (-20C to 105C) at 25C
> Reset cause: POR
> Board: MX6 HummingBoard2 (som rev 1.5)
> DRAM:  2 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> Loading Environment from MMC... *** Warning - bad CRC, using default environment
> 
> No panel detected: default to HDMI
> Display: HDMI (1024x768)
> In:    serial
> Out:   serial
> Err:   serial
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-04  7:11 Stefano Babic
  2018-09-05 15:49 ` Tom Rini
@ 2018-09-06  9:23 ` Peter Robinson
  2018-09-06  9:33   ` Stefano Babic
  1 sibling, 1 reply; 307+ messages in thread
From: Peter Robinson @ 2018-09-06  9:23 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

> a new PR. I dropped the patches causing breakages on PowerPC boards, as
> well as the issue on GE boards. It ran on travis successfully.
>
>
> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
>
>   configs: am57xx: change default board name to beagle_x15 (2018-08-26
> 12:26:16 -0400)
>
> are available in the Git repository at:
>
>   git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to c1d1543ebc6e1fb026d0d7ac96d865faa7567555:
>
>   mx7dsabresd: Add the qspi target to the list of supported defconfigs
> (2018-09-04 08:47:23 +0200)
>
> ----------------------------------------------------------------
> Alex Kiernan (1):
>       Cleanup CONFIG_BOOTDELAY on cl-som-imx7
>
> Anson Huang (3):
>       imx: mx7: psci: improve cpu hotplug flow
>       imx: mx7: add gpc initialization for low power mode
>       imx: mx7: add system suspend/resume support
>
> Fabio Estevam (1):
>       mx7dsabresd: Add the qspi target to the list of supported defconfigs
>
> Martin Kaiser (1):
>       watchdog: mx25: use the imx_watchdog driver for mx25
>
> Stefan Agner (2):
>       board: toradex: common: fail gracefully on missing NAND chip
>       colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support
>
> Stefano Babic (1):
>       imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig
>
> Ye Li (6):
>       imx: imx6sx-sdb: Enable DM QSPI driver
>       imx: imx6sx-sabreauto: convert to use DM QSPI driver
>       imx: imx7d-sdb: Add DM QSPI support
>       dts: imx6ul: Update alias to support DM
>       dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
>       imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot

Are you aware of any issues on some imx6 devices in 2018.09? The
hummingboard2 (imx6q) hangs for me just after the output below, even
with the above PR, it works fine with a imx6sx device (udoo neo). I'm
sure I've seen something on the list that might be related but I can't
find it.

Sorry for picking this up so late in the cycle.

Peter

U-Boot SPL 2018.09-rc3 (Sep 05 2018 - 20:28:15 +0000)
Trying to boot from MMC1


U-Boot 2018.09-rc3 (Sep 05 2018 - 20:28:15 +0000)

CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 25C
Reset cause: POR
Board: MX6 HummingBoard2 (som rev 1.5)
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-04  7:11 Stefano Babic
@ 2018-09-05 15:49 ` Tom Rini
  2018-09-06  9:23 ` Peter Robinson
  1 sibling, 0 replies; 307+ messages in thread
From: Tom Rini @ 2018-09-05 15:49 UTC (permalink / raw)
  To: u-boot

On Tue, Sep 04, 2018 at 09:11:50AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> a new PR. I dropped the patches causing breakages on PowerPC boards, as
> well as the issue on GE boards. It ran on travis successfully.
> 
> 
> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
> 
>   configs: am57xx: change default board name to beagle_x15 (2018-08-26
> 12:26:16 -0400)
> 
> are available in the Git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to c1d1543ebc6e1fb026d0d7ac96d865faa7567555:
> 
>   mx7dsabresd: Add the qspi target to the list of supported defconfigs
> (2018-09-04 08:47:23 +0200)

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180905/5142c7aa/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-09-04  7:11 Stefano Babic
  2018-09-05 15:49 ` Tom Rini
  2018-09-06  9:23 ` Peter Robinson
  0 siblings, 2 replies; 307+ messages in thread
From: Stefano Babic @ 2018-09-04  7:11 UTC (permalink / raw)
  To: u-boot

Hi Tom,

a new PR. I dropped the patches causing breakages on PowerPC boards, as
well as the issue on GE boards. It ran on travis successfully.


The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:

  configs: am57xx: change default board name to beagle_x15 (2018-08-26
12:26:16 -0400)

are available in the Git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to c1d1543ebc6e1fb026d0d7ac96d865faa7567555:

  mx7dsabresd: Add the qspi target to the list of supported defconfigs
(2018-09-04 08:47:23 +0200)

----------------------------------------------------------------
Alex Kiernan (1):
      Cleanup CONFIG_BOOTDELAY on cl-som-imx7

Anson Huang (3):
      imx: mx7: psci: improve cpu hotplug flow
      imx: mx7: add gpc initialization for low power mode
      imx: mx7: add system suspend/resume support

Fabio Estevam (1):
      mx7dsabresd: Add the qspi target to the list of supported defconfigs

Martin Kaiser (1):
      watchdog: mx25: use the imx_watchdog driver for mx25

Stefan Agner (2):
      board: toradex: common: fail gracefully on missing NAND chip
      colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support

Stefano Babic (1):
      imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig

Ye Li (6):
      imx: imx6sx-sdb: Enable DM QSPI driver
      imx: imx6sx-sabreauto: convert to use DM QSPI driver
      imx: imx7d-sdb: Add DM QSPI support
      dts: imx6ul: Update alias to support DM
      dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
      imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot

 arch/arm/dts/Makefile                             |   7 ++-
 arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi         |  16 +++++
 arch/arm/dts/imx6sx-sabreauto.dts                 |  40 +++++++++++++
 arch/arm/dts/imx6sx-sdb-u-boot.dtsi               |  16 +++++
 arch/arm/dts/imx6sx.dtsi                          |  12 ++--
 arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi         |  10 ++++
 arch/arm/dts/imx6ul-14x14-evk.dts                 | 427
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi           |  10 ++++
 arch/arm/dts/imx6ul-9x9-evk.dts                   | 471
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6ul.dtsi                          |  13 ++--
 arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi           |  10 ++++
 arch/arm/dts/imx7d-sdb-qspi.dts                   |  44 ++++++++++++++
 arch/arm/dts/imx7d-sdb.dts                        |   6 +-
 arch/arm/dts/imx7d.dtsi                           |  12 ++++
 arch/arm/dts/imx7s.dtsi                           |  22 +++++--
 arch/arm/include/asm/arch-mx25/imx-regs.h         |   1 +
 arch/arm/mach-imx/mx7/Makefile                    |   2 +-
 arch/arm/mach-imx/mx7/psci-mx7.c                  | 472
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 arch/arm/mach-imx/mx7/psci-suspend.S              |  67
+++++++++++++++++++++
 arch/arm/mach-imx/mx7/soc.c                       | 103
++++++++++++++++++++++++++++++++
 board/freescale/mx6sxsabreauto/mx6sxsabreauto.c   |  24 --------
 board/freescale/mx6sxsabresd/mx6sxsabresd.c       |  25 --------
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 208
+++++++++++++---------------------------------------------------
 board/freescale/mx7dsabresd/MAINTAINERS           |   1 +
 board/freescale/mx7dsabresd/mx7dsabresd.c         |  16 -----
 board/toradex/colibri_imx7/Kconfig                |  42 ++++++++++++-
 board/toradex/colibri_imx7/MAINTAINERS            |   4 ++
 board/toradex/colibri_imx7/colibri_imx7.c         |  41 +++++++++++--
 board/toradex/common/tdx-cfg-block.c              |   7 ++-
 configs/mx6sxsabreauto_defconfig                  |   2 +
 configs/mx6sxsabresd_defconfig                    |   7 +++
 configs/mx6ul_14x14_evk_defconfig                 |  17 +++++-
 configs/mx6ul_9x9_evk_defconfig                   |  20 ++++++-
 configs/mx7dsabresd_qspi_defconfig                |  84
++++++++++++++++++++++++++
 drivers/watchdog/Makefile                         |   2 +-
 include/configs/cl-som-imx7.h                     |   2 -
 include/configs/colibri_imx7.h                    |  90
++++++++++++++++++++++------
 include/configs/mx6sxsabresd.h                    |   4 ++
 include/configs/mx6ul_14x14_evk.h                 |  13 ++--
 include/configs/mx7dsabresd.h                     |   4 +-
 40 files changed, 2079 insertions(+), 295 deletions(-)
 create mode 100644 arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6sx-sdb-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-14x14-evk.dts
 create mode 100644 arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-9x9-evk.dts
 create mode 100644 arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx7d-sdb-qspi.dts
 create mode 100644 arch/arm/mach-imx/mx7/psci-suspend.S
 create mode 100644 configs/mx7dsabresd_qspi_defconfig


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-02 14:15     ` Tom Rini
@ 2018-09-03  7:47       ` Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2018-09-03  7:47 UTC (permalink / raw)
  To: u-boot

On 02/09/2018 16:15, Tom Rini wrote:
> On Sun, Sep 02, 2018 at 03:20:25PM +0200, Sébastien Szymanski wrote:
> 
>> Hi Tom,
>>
>>> On 1 Sep 2018, at 13:37, Tom Rini <trini@konsulko.com> wrote:
>>>
>>> - So I start reading the whole diff and I see:
>>> commit 8e00d802e402d2a6734a88ebeb77a70efcfc354c
>>> Author: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
>>> Date:   Wed Jul 25 14:47:53 2018 +0200
>>>
>>>    ARM: opos6ul: make the board boot again
>>>
>>> Which is wrong.  The -u-boot.dtsi file is automatically included and
>>> should have all of the U-Boot specific DTS changes.
>>>
>>
>> :(
>>
>> I don’t understand your comment. What -u-boot.dtsi file is
>> automatically included ? I have put all the U-Boot specific DTS
>> changes in imx6ul-opos6ul-u-boot.dtsi and imx6u-opos6uldev-u-boot.dts
>> files.
> 
> Take a look at the u_boot_dtsi_options logic in scripts/Makefile.lib for
> all of the possible dtsi files that will be automatically included if
> found.  This is so that end the end for a given board you should be able
> to drop in the dts file(s) from Linux, create a -u-boot.dtsi and then
> have things work, no changes to the upstream files required nor
> specifying an otherwise unusual name.
> 

I revert the patch on u-boot.imx to get a clean build again that can be
accepted by Tom.

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-02 17:11     ` Tom Rini
@ 2018-09-02 17:29       ` Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2018-09-02 17:29 UTC (permalink / raw)
  To: u-boot



On 02/09/2018 19:11, Tom Rini wrote:
> On Sun, Sep 02, 2018 at 07:06:06PM +0200, Stefano Babic wrote:
>>
>>
>> On 01/09/2018 13:37, Tom Rini wrote:
>>> On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote:
>>>
>>>> Hi Tom,
>>>>
>>>> please pull from u-boot-imx, thanks !
>>>>
>>>> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
>>>>
>>>>   configs: am57xx: change default board name to beagle_x15 (2018-08-26
>>>> 12:26:16 -0400)
>>>>
>>>> are available in the Git repository at:
>>>>
>>>>   git://www.denx.de/git/u-boot-imx.git master
>>>>
>>>> for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b:
>>>>
>>>>   imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31
>>>> 12:08:43 +0200)
>>>>
>>>
>>> OK, NAK for the following problems:
>>> - Fail to build: https://travis-ci.org/trini/u-boot/jobs/423197300
>>>   The failing board is ids8313 and it's failing to configure as
>>>   CONFIG_SYS_BOOTCOUNT_I2C_BUS needs to be set, and isn't
>>
>> It looks wrong how I verify the whole build. Running buildman on my
>> host, all boards were built. I will
> 
> That's odd.  Are you building the world, or just arm? 

I am building i.MX, that could be the cause:

./tools/buildman/buildman imx mx25 mx27 mx31 mx35 mxs mx5 mx6 mx7 vf610


> I noticed this
> since my non-travis world build got stuck and then confirmed it just
> trying to build that single PowerPC board.

ok

> 
>>> - In looking into the above I see configs/ge_bx50v3_defconfig and
>>>   configs/mx53ppd_defconfig and a few more have a bunch of comments
>>>   added to it.  These will be blown away on the next re-sync.  Comments
>>>   need to go into the board README or something not an auto-generated
>>>   file.
>>
>> I saw this, but if the board maintainer won't use "make savedefonfig" to
>> generate its own defconfig, I have not blocked this if this lead to a
>> successful build.
> 
> It needs to be a rejection error, I try and remember to re-sync all of
> the defconfigs at least before the final release and if I'm doing it
> right, before the -rcs too.

ok

> 
>>> - So I start reading the whole diff and I see:
>>> commit 8e00d802e402d2a6734a88ebeb77a70efcfc354c
>>> Author: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
>>> Date:   Wed Jul 25 14:47:53 2018 +0200
>>>
>>>     ARM: opos6ul: make the board boot again
>>>
>>> Which is wrong.  The -u-boot.dtsi file is automatically included and
>>> should have all of the U-Boot specific DTS changes.
>>
>> I have to understand why my build was successful...
> 
> It's not a fatal problem, it's just not doing things the right way.
> 
>>> - And since the above big real problems exist I'm going to point out for
>>>   you to fix:
>>> WARNING: no status info for 'mx7dsabresd_qspi'
>>> WARNING: no maintainers for 'mx7dsabresd_qspi'
>>>
>>
>> Note this, they will be fixed.
> 
> Fabio posted a patch for this one BTW.

Thanks, I pick it up.

Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-02 17:06   ` Stefano Babic
@ 2018-09-02 17:11     ` Tom Rini
  2018-09-02 17:29       ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2018-09-02 17:11 UTC (permalink / raw)
  To: u-boot

On Sun, Sep 02, 2018 at 07:06:06PM +0200, Stefano Babic wrote:
> 
> 
> On 01/09/2018 13:37, Tom Rini wrote:
> > On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote:
> > 
> >> Hi Tom,
> >>
> >> please pull from u-boot-imx, thanks !
> >>
> >> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
> >>
> >>   configs: am57xx: change default board name to beagle_x15 (2018-08-26
> >> 12:26:16 -0400)
> >>
> >> are available in the Git repository at:
> >>
> >>   git://www.denx.de/git/u-boot-imx.git master
> >>
> >> for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b:
> >>
> >>   imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31
> >> 12:08:43 +0200)
> >>
> > 
> > OK, NAK for the following problems:
> > - Fail to build: https://travis-ci.org/trini/u-boot/jobs/423197300
> >   The failing board is ids8313 and it's failing to configure as
> >   CONFIG_SYS_BOOTCOUNT_I2C_BUS needs to be set, and isn't
> 
> It looks wrong how I verify the whole build. Running buildman on my
> host, all boards were built. I will

That's odd.  Are you building the world, or just arm?  I noticed this
since my non-travis world build got stuck and then confirmed it just
trying to build that single PowerPC board.

> > - In looking into the above I see configs/ge_bx50v3_defconfig and
> >   configs/mx53ppd_defconfig and a few more have a bunch of comments
> >   added to it.  These will be blown away on the next re-sync.  Comments
> >   need to go into the board README or something not an auto-generated
> >   file.
> 
> I saw this, but if the board maintainer won't use "make savedefonfig" to
> generate its own defconfig, I have not blocked this if this lead to a
> successful build.

It needs to be a rejection error, I try and remember to re-sync all of
the defconfigs at least before the final release and if I'm doing it
right, before the -rcs too.

> > - So I start reading the whole diff and I see:
> > commit 8e00d802e402d2a6734a88ebeb77a70efcfc354c
> > Author: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> > Date:   Wed Jul 25 14:47:53 2018 +0200
> > 
> >     ARM: opos6ul: make the board boot again
> > 
> > Which is wrong.  The -u-boot.dtsi file is automatically included and
> > should have all of the U-Boot specific DTS changes.
> 
> I have to understand why my build was successful...

It's not a fatal problem, it's just not doing things the right way.

> > - And since the above big real problems exist I'm going to point out for
> >   you to fix:
> > WARNING: no status info for 'mx7dsabresd_qspi'
> > WARNING: no maintainers for 'mx7dsabresd_qspi'
> > 
> 
> Note this, they will be fixed.

Fabio posted a patch for this one BTW.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180902/63f72cbd/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-01 11:37 ` Tom Rini
  2018-09-02 13:20   ` Sébastien Szymanski
@ 2018-09-02 17:06   ` Stefano Babic
  2018-09-02 17:11     ` Tom Rini
  1 sibling, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-09-02 17:06 UTC (permalink / raw)
  To: u-boot



On 01/09/2018 13:37, Tom Rini wrote:
> On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote:
> 
>> Hi Tom,
>>
>> please pull from u-boot-imx, thanks !
>>
>> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
>>
>>   configs: am57xx: change default board name to beagle_x15 (2018-08-26
>> 12:26:16 -0400)
>>
>> are available in the Git repository at:
>>
>>   git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b:
>>
>>   imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31
>> 12:08:43 +0200)
>>
> 
> OK, NAK for the following problems:
> - Fail to build: https://travis-ci.org/trini/u-boot/jobs/423197300
>   The failing board is ids8313 and it's failing to configure as
>   CONFIG_SYS_BOOTCOUNT_I2C_BUS needs to be set, and isn't

It looks wrong how I verify the whole build. Running buildman on my
host, all boards were built. I will

> - In looking into the above I see configs/ge_bx50v3_defconfig and
>   configs/mx53ppd_defconfig and a few more have a bunch of comments
>   added to it.  These will be blown away on the next re-sync.  Comments
>   need to go into the board README or something not an auto-generated
>   file.

I saw this, but if the board maintainer won't use "make savedefonfig" to
generate its own defconfig, I have not blocked this if this lead to a
successful build.

> - So I start reading the whole diff and I see:
> commit 8e00d802e402d2a6734a88ebeb77a70efcfc354c
> Author: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> Date:   Wed Jul 25 14:47:53 2018 +0200
> 
>     ARM: opos6ul: make the board boot again
> 
> Which is wrong.  The -u-boot.dtsi file is automatically included and
> should have all of the U-Boot specific DTS changes.

I have to understand why my build was successful...

> 
> - And since the above big real problems exist I'm going to point out for
>   you to fix:
> WARNING: no status info for 'mx7dsabresd_qspi'
> WARNING: no maintainers for 'mx7dsabresd_qspi'
> 

Note this, they will be fixed.

> Rather than fix it myself like I was going to before I found the other
> issues.
> 

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-02 13:20   ` Sébastien Szymanski
@ 2018-09-02 14:15     ` Tom Rini
  2018-09-03  7:47       ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2018-09-02 14:15 UTC (permalink / raw)
  To: u-boot

On Sun, Sep 02, 2018 at 03:20:25PM +0200, Sébastien Szymanski wrote:

> Hi Tom,
> 
> > On 1 Sep 2018, at 13:37, Tom Rini <trini@konsulko.com> wrote:
> > 
> > - So I start reading the whole diff and I see:
> > commit 8e00d802e402d2a6734a88ebeb77a70efcfc354c
> > Author: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> > Date:   Wed Jul 25 14:47:53 2018 +0200
> > 
> >    ARM: opos6ul: make the board boot again
> > 
> > Which is wrong.  The -u-boot.dtsi file is automatically included and
> > should have all of the U-Boot specific DTS changes.
> > 
> 
> :(
> 
> I don’t understand your comment. What -u-boot.dtsi file is
> automatically included ? I have put all the U-Boot specific DTS
> changes in imx6ul-opos6ul-u-boot.dtsi and imx6u-opos6uldev-u-boot.dts
> files.

Take a look at the u_boot_dtsi_options logic in scripts/Makefile.lib for
all of the possible dtsi files that will be automatically included if
found.  This is so that end the end for a given board you should be able
to drop in the dts file(s) from Linux, create a -u-boot.dtsi and then
have things work, no changes to the upstream files required nor
specifying an otherwise unusual name.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180902/f500baad/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-09-01 11:37 ` Tom Rini
@ 2018-09-02 13:20   ` Sébastien Szymanski
  2018-09-02 14:15     ` Tom Rini
  2018-09-02 17:06   ` Stefano Babic
  1 sibling, 1 reply; 307+ messages in thread
From: Sébastien Szymanski @ 2018-09-02 13:20 UTC (permalink / raw)
  To: u-boot

Hi Tom,

> On 1 Sep 2018, at 13:37, Tom Rini <trini@konsulko.com> wrote:
> 
> - So I start reading the whole diff and I see:
> commit 8e00d802e402d2a6734a88ebeb77a70efcfc354c
> Author: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> Date:   Wed Jul 25 14:47:53 2018 +0200
> 
>    ARM: opos6ul: make the board boot again
> 
> Which is wrong.  The -u-boot.dtsi file is automatically included and
> should have all of the U-Boot specific DTS changes.
> 

:(

I don’t understand your comment. What -u-boot.dtsi file is automatically included ? I have put all the U-Boot specific DTS changes in imx6ul-opos6ul-u-boot.dtsi and imx6u-opos6uldev-u-boot.dts files.

Regards, 

> 
> -- 
> Tom
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

--
Sébastien Szymanski
Software engineer, Armadeus Systems
Tel: +33 (0)9 72 29 41 44
Fax: +33 (0)9 72 28 79 26

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-08-31 13:04 Stefano Babic
  2018-08-31 13:07 ` Tom Rini
@ 2018-09-01 11:37 ` Tom Rini
  2018-09-02 13:20   ` Sébastien Szymanski
  2018-09-02 17:06   ` Stefano Babic
  1 sibling, 2 replies; 307+ messages in thread
From: Tom Rini @ 2018-09-01 11:37 UTC (permalink / raw)
  To: u-boot

On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
> 
>   configs: am57xx: change default board name to beagle_x15 (2018-08-26
> 12:26:16 -0400)
> 
> are available in the Git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b:
> 
>   imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31
> 12:08:43 +0200)
> 

OK, NAK for the following problems:
- Fail to build: https://travis-ci.org/trini/u-boot/jobs/423197300
  The failing board is ids8313 and it's failing to configure as
  CONFIG_SYS_BOOTCOUNT_I2C_BUS needs to be set, and isn't
- In looking into the above I see configs/ge_bx50v3_defconfig and
  configs/mx53ppd_defconfig and a few more have a bunch of comments
  added to it.  These will be blown away on the next re-sync.  Comments
  need to go into the board README or something not an auto-generated
  file.
- So I start reading the whole diff and I see:
commit 8e00d802e402d2a6734a88ebeb77a70efcfc354c
Author: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Date:   Wed Jul 25 14:47:53 2018 +0200

    ARM: opos6ul: make the board boot again

Which is wrong.  The -u-boot.dtsi file is automatically included and
should have all of the U-Boot specific DTS changes.

- And since the above big real problems exist I'm going to point out for
  you to fix:
WARNING: no status info for 'mx7dsabresd_qspi'
WARNING: no maintainers for 'mx7dsabresd_qspi'

Rather than fix it myself like I was going to before I found the other
issues.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180901/0ad76050/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-08-31 13:07 ` Tom Rini
  2018-08-31 18:53   ` Otavio Salvador
@ 2018-08-31 19:26   ` Stefano Babic
  1 sibling, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2018-08-31 19:26 UTC (permalink / raw)
  To: u-boot

On 31/08/2018 15:07, Tom Rini wrote:
> On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote:
>> Hi Tom,
>>
>> please pull from u-boot-imx, thanks !
>>
>> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
>>
>>   configs: am57xx: change default board name to beagle_x15 (2018-08-26
>> 12:26:16 -0400)
>>
>> are available in the Git repository at:
>>
>>   git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b:
>>
>>   imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31
>> 12:08:43 +0200)
>>
>> ----------------------------------------------------------------
>> Alex Kiernan (1):
>>       Cleanup CONFIG_BOOTDELAY on cl-som-imx7
>>
>> Anson Huang (3):
>>       imx: mx7: psci: improve cpu hotplug flow
>>       imx: mx7: add gpc initialization for low power mode
>>       imx: mx7: add system suspend/resume support
>>
>> Denis Zalevskiy (6):
>>       board: ge: Remove EEPROM bus param from read_vpd()
>>       board: ge: Move VPD EEPROM configuration to the defconfig
>>       bootcount: i2c: Add bus switching to the I2C bootcount driver
>>       bootcount: Configure length limit for I2C bootcount
>>       board: ge: Move VPD reading to the vpd_reader
>>       board: ge: Store bootcount in EEPROM on PPD and Bx50v3
>>
>> Martin Kaiser (1):
>>       watchdog: mx25: use the imx_watchdog driver for mx25
>>
>> Stefan Agner (2):
>>       board: toradex: common: fail gracefully on missing NAND chip
>>       colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support
>>
>> Stefano Babic (2):
>>       Merge branch 'master' of git://git.denx.de/u-boot into master
>>       imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig
>>
>> Sébastien Szymanski (1):
>>       ARM: opos6ul: make the board boot again
>>
>> Ye Li (6):
>>       imx: imx6sx-sdb: Enable DM QSPI driver
>>       imx: imx6sx-sabreauto: convert to use DM QSPI driver
>>       imx: imx7d-sdb: Add DM QSPI support
>>       dts: imx6ul: Update alias to support DM
>>       dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
>>       imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot
>>
>>  arch/arm/dts/Makefile                             |   7 +-
>>  arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi         |  16 +
>>  arch/arm/dts/imx6sx-sabreauto.dts                 |  40 ++
>>  arch/arm/dts/imx6sx-sdb-u-boot.dtsi               |  16 +
>>  arch/arm/dts/imx6sx.dtsi                          |  12 +-
>>  arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi         |  10 +
>>  arch/arm/dts/imx6ul-14x14-evk.dts                 | 427 +++++++++++++++++++
>>  arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi           |  10 +
>>  arch/arm/dts/imx6ul-9x9-evk.dts                   | 471
>> +++++++++++++++++++++
>>  arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi           |  28 ++
>>  arch/arm/dts/imx6ul-opos6ul.dtsi                  |   2 -
>>  arch/arm/dts/imx6ul-opos6uldev-u-boot.dts         |  25 ++
>>  arch/arm/dts/imx6ul-opos6uldev.dts                |   2 -
>>  arch/arm/dts/imx6ul.dtsi                          |  13 +-
>>  arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi           |  10 +
>>  arch/arm/dts/imx7d-sdb-qspi.dts                   |  44 ++
>>  arch/arm/dts/imx7d-sdb.dts                        |   6 +-
>>  arch/arm/dts/imx7d.dtsi                           |  12 +
>>  arch/arm/dts/imx7s.dtsi                           |  22 +-
>>  arch/arm/include/asm/arch-mx25/imx-regs.h         |   1 +
>>  arch/arm/mach-imx/mx7/Makefile                    |   2 +-
>>  arch/arm/mach-imx/mx7/psci-mx7.c                  | 472
>> +++++++++++++++++++++-
>>  arch/arm/mach-imx/mx7/psci-suspend.S              |  67 +++
>>  arch/arm/mach-imx/mx7/soc.c                       | 103 +++++
>>  board/freescale/mx6sxsabreauto/mx6sxsabreauto.c   |  24 --
>>  board/freescale/mx6sxsabresd/mx6sxsabresd.c       |  25 --
>>  board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 208 ++--------
>>  board/freescale/mx7dsabresd/mx7dsabresd.c         |  16 -
>>  board/ge/bx50v3/Kconfig                           |   2 +
>>  board/ge/bx50v3/bx50v3.c                          |  57 +--
>>  board/ge/common/Kconfig                           |  14 +
>>  board/ge/common/vpd_reader.c                      |  57 ++-
>>  board/ge/common/vpd_reader.h                      |  16 +-
>>  board/ge/mx53ppd/Kconfig                          |   2 +
>>  board/ge/mx53ppd/mx53ppd.c                        |  50 +--
>>  board/toradex/colibri_imx7/Kconfig                |  42 +-
>>  board/toradex/colibri_imx7/MAINTAINERS            |   4 +
>>  board/toradex/colibri_imx7/colibri_imx7.c         |  41 +-
>>  board/toradex/common/tdx-cfg-block.c              |   7 +-
>>  configs/ge_bx50v3_defconfig                       |  27 +-
>>  configs/mx53ppd_defconfig                         |  29 +-
>>  configs/mx6sxsabreauto_defconfig                  |   2 +
>>  configs/mx6sxsabresd_defconfig                    |   7 +
>>  configs/mx6ul_14x14_evk_defconfig                 |  17 +-
>>  configs/mx6ul_9x9_evk_defconfig                   |  20 +-
>>  configs/mx7dsabresd_qspi_defconfig                |  84 ++++
>>  configs/opos6uldev_defconfig                      |   2 +-
>>  drivers/bootcount/Kconfig                         |  21 +-
>>  drivers/bootcount/bootcount_i2c.c                 |  78 +++-
>>  drivers/watchdog/Makefile                         |   2 +-
>>  include/configs/cl-som-imx7.h                     |   2 -
>>  include/configs/colibri_imx7.h                    |  90 ++++-
>>  include/configs/ge_bx50v3.h                       |   6 +-
>>  include/configs/mx53ppd.h                         |   6 +-
>>  include/configs/mx6sxsabresd.h                    |   4 +
>>  include/configs/mx6ul_14x14_evk.h                 |  13 +-
>>  include/configs/mx7dsabresd.h                     |   4 +-
>>  57 files changed, 2376 insertions(+), 421 deletions(-)
> 
> This is a lot.  I know I should have tagged -rc3 this past Monday, but
> forgot (and so, yeah, I need to get back into my habit of calendar
> reminders), but still, the release is 10 days away.  It looks like
> there's a lot of new stuff in here too, not just clean-ups.  Are you
> sure this is all appropriate at this stage?  Thanks!

Several of them are fixes and I got reminder for the submitter to psuh
them from the releases. These are from Anson and Stefan. I merged Ye's
patches sometime ago, but I have not sent any PR after that.Sebastien's
partch is a fix, too, and I merge GE's board because patches are quite
old, ready to be merged and related just to the GE boards. I had to fix
a broken board after merging, so my is also a fix. So yes, I think they
are fixes for the release. It is just that I picked modt of them quite
late because I had no time to do this before.

Thanks,
Stefano



-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-08-31 19:20     ` Stefano Babic
@ 2018-08-31 19:26       ` Otavio Salvador
  0 siblings, 0 replies; 307+ messages in thread
From: Otavio Salvador @ 2018-08-31 19:26 UTC (permalink / raw)
  To: u-boot

On Fri, Aug 31, 2018 at 4:21 PM Stefano Babic <sbabic@denx.de> wrote:
> On 31/08/2018 20:53, Otavio Salvador wrote:
> > On Fri, Aug 31, 2018 at 10:08 AM Tom Rini <trini@konsulko.com> wrote:
> >> On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote:
> >>> please pull from u-boot-imx, thanks !
> >
> > We sent few patches for PICO and we'd like to get them merged for next
> > release if possible. Is it possible for you to review them and see if
> > they are fine for merging or need adjustments?
>
> I saw your patches, but Tom is already complaining that I have sent a PR
> with more changes as he expected. You just sent your patchset yesterday
> and, even if they are just for pico-imx6ul, I will pick them after release.

Being a board specific I really see no high right but postponing it,
is fine for sure. If possible, provide some feedback so I can rework
anything need.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854          Mobile: +1 (347) 903-9750

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-08-31 18:53   ` Otavio Salvador
@ 2018-08-31 19:20     ` Stefano Babic
  2018-08-31 19:26       ` Otavio Salvador
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-08-31 19:20 UTC (permalink / raw)
  To: u-boot

Hi Otavio,

On 31/08/2018 20:53, Otavio Salvador wrote:
> Hello Stefano,
> 
> On Fri, Aug 31, 2018 at 10:08 AM Tom Rini <trini@konsulko.com> wrote:
>> On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote:
>>> please pull from u-boot-imx, thanks !
> 
> We sent few patches for PICO and we'd like to get them merged for next
> release if possible. Is it possible for you to review them and see if
> they are fine for merging or need adjustments?

I saw your patches, but Tom is already complaining that I have sent a PR
with more changes as he expected. You just sent your patchset yesterday
and, even if they are just for pico-imx6ul, I will pick them after release.

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-08-31 13:07 ` Tom Rini
@ 2018-08-31 18:53   ` Otavio Salvador
  2018-08-31 19:20     ` Stefano Babic
  2018-08-31 19:26   ` Stefano Babic
  1 sibling, 1 reply; 307+ messages in thread
From: Otavio Salvador @ 2018-08-31 18:53 UTC (permalink / raw)
  To: u-boot

Hello Stefano,

On Fri, Aug 31, 2018 at 10:08 AM Tom Rini <trini@konsulko.com> wrote:
> On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote:
> > please pull from u-boot-imx, thanks !

We sent few patches for PICO and we'd like to get them merged for next
release if possible. Is it possible for you to review them and see if
they are fine for merging or need adjustments?

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854          Mobile: +1 (347) 903-9750

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-08-31 13:04 Stefano Babic
@ 2018-08-31 13:07 ` Tom Rini
  2018-08-31 18:53   ` Otavio Salvador
  2018-08-31 19:26   ` Stefano Babic
  2018-09-01 11:37 ` Tom Rini
  1 sibling, 2 replies; 307+ messages in thread
From: Tom Rini @ 2018-08-31 13:07 UTC (permalink / raw)
  To: u-boot

On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote:
> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
> 
>   configs: am57xx: change default board name to beagle_x15 (2018-08-26
> 12:26:16 -0400)
> 
> are available in the Git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b:
> 
>   imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31
> 12:08:43 +0200)
> 
> ----------------------------------------------------------------
> Alex Kiernan (1):
>       Cleanup CONFIG_BOOTDELAY on cl-som-imx7
> 
> Anson Huang (3):
>       imx: mx7: psci: improve cpu hotplug flow
>       imx: mx7: add gpc initialization for low power mode
>       imx: mx7: add system suspend/resume support
> 
> Denis Zalevskiy (6):
>       board: ge: Remove EEPROM bus param from read_vpd()
>       board: ge: Move VPD EEPROM configuration to the defconfig
>       bootcount: i2c: Add bus switching to the I2C bootcount driver
>       bootcount: Configure length limit for I2C bootcount
>       board: ge: Move VPD reading to the vpd_reader
>       board: ge: Store bootcount in EEPROM on PPD and Bx50v3
> 
> Martin Kaiser (1):
>       watchdog: mx25: use the imx_watchdog driver for mx25
> 
> Stefan Agner (2):
>       board: toradex: common: fail gracefully on missing NAND chip
>       colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support
> 
> Stefano Babic (2):
>       Merge branch 'master' of git://git.denx.de/u-boot into master
>       imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig
> 
> Sébastien Szymanski (1):
>       ARM: opos6ul: make the board boot again
> 
> Ye Li (6):
>       imx: imx6sx-sdb: Enable DM QSPI driver
>       imx: imx6sx-sabreauto: convert to use DM QSPI driver
>       imx: imx7d-sdb: Add DM QSPI support
>       dts: imx6ul: Update alias to support DM
>       dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
>       imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot
> 
>  arch/arm/dts/Makefile                             |   7 +-
>  arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi         |  16 +
>  arch/arm/dts/imx6sx-sabreauto.dts                 |  40 ++
>  arch/arm/dts/imx6sx-sdb-u-boot.dtsi               |  16 +
>  arch/arm/dts/imx6sx.dtsi                          |  12 +-
>  arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi         |  10 +
>  arch/arm/dts/imx6ul-14x14-evk.dts                 | 427 +++++++++++++++++++
>  arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi           |  10 +
>  arch/arm/dts/imx6ul-9x9-evk.dts                   | 471
> +++++++++++++++++++++
>  arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi           |  28 ++
>  arch/arm/dts/imx6ul-opos6ul.dtsi                  |   2 -
>  arch/arm/dts/imx6ul-opos6uldev-u-boot.dts         |  25 ++
>  arch/arm/dts/imx6ul-opos6uldev.dts                |   2 -
>  arch/arm/dts/imx6ul.dtsi                          |  13 +-
>  arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi           |  10 +
>  arch/arm/dts/imx7d-sdb-qspi.dts                   |  44 ++
>  arch/arm/dts/imx7d-sdb.dts                        |   6 +-
>  arch/arm/dts/imx7d.dtsi                           |  12 +
>  arch/arm/dts/imx7s.dtsi                           |  22 +-
>  arch/arm/include/asm/arch-mx25/imx-regs.h         |   1 +
>  arch/arm/mach-imx/mx7/Makefile                    |   2 +-
>  arch/arm/mach-imx/mx7/psci-mx7.c                  | 472
> +++++++++++++++++++++-
>  arch/arm/mach-imx/mx7/psci-suspend.S              |  67 +++
>  arch/arm/mach-imx/mx7/soc.c                       | 103 +++++
>  board/freescale/mx6sxsabreauto/mx6sxsabreauto.c   |  24 --
>  board/freescale/mx6sxsabresd/mx6sxsabresd.c       |  25 --
>  board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 208 ++--------
>  board/freescale/mx7dsabresd/mx7dsabresd.c         |  16 -
>  board/ge/bx50v3/Kconfig                           |   2 +
>  board/ge/bx50v3/bx50v3.c                          |  57 +--
>  board/ge/common/Kconfig                           |  14 +
>  board/ge/common/vpd_reader.c                      |  57 ++-
>  board/ge/common/vpd_reader.h                      |  16 +-
>  board/ge/mx53ppd/Kconfig                          |   2 +
>  board/ge/mx53ppd/mx53ppd.c                        |  50 +--
>  board/toradex/colibri_imx7/Kconfig                |  42 +-
>  board/toradex/colibri_imx7/MAINTAINERS            |   4 +
>  board/toradex/colibri_imx7/colibri_imx7.c         |  41 +-
>  board/toradex/common/tdx-cfg-block.c              |   7 +-
>  configs/ge_bx50v3_defconfig                       |  27 +-
>  configs/mx53ppd_defconfig                         |  29 +-
>  configs/mx6sxsabreauto_defconfig                  |   2 +
>  configs/mx6sxsabresd_defconfig                    |   7 +
>  configs/mx6ul_14x14_evk_defconfig                 |  17 +-
>  configs/mx6ul_9x9_evk_defconfig                   |  20 +-
>  configs/mx7dsabresd_qspi_defconfig                |  84 ++++
>  configs/opos6uldev_defconfig                      |   2 +-
>  drivers/bootcount/Kconfig                         |  21 +-
>  drivers/bootcount/bootcount_i2c.c                 |  78 +++-
>  drivers/watchdog/Makefile                         |   2 +-
>  include/configs/cl-som-imx7.h                     |   2 -
>  include/configs/colibri_imx7.h                    |  90 ++++-
>  include/configs/ge_bx50v3.h                       |   6 +-
>  include/configs/mx53ppd.h                         |   6 +-
>  include/configs/mx6sxsabresd.h                    |   4 +
>  include/configs/mx6ul_14x14_evk.h                 |  13 +-
>  include/configs/mx7dsabresd.h                     |   4 +-
>  57 files changed, 2376 insertions(+), 421 deletions(-)

This is a lot.  I know I should have tagged -rc3 this past Monday, but
forgot (and so, yeah, I need to get back into my habit of calendar
reminders), but still, the release is 10 days away.  It looks like
there's a lot of new stuff in here too, not just clean-ups.  Are you
sure this is all appropriate at this stage?  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180831/9a0809e0/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-08-31 13:04 Stefano Babic
  2018-08-31 13:07 ` Tom Rini
  2018-09-01 11:37 ` Tom Rini
  0 siblings, 2 replies; 307+ messages in thread
From: Stefano Babic @ 2018-08-31 13:04 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:

  configs: am57xx: change default board name to beagle_x15 (2018-08-26
12:26:16 -0400)

are available in the Git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b:

  imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31
12:08:43 +0200)

----------------------------------------------------------------
Alex Kiernan (1):
      Cleanup CONFIG_BOOTDELAY on cl-som-imx7

Anson Huang (3):
      imx: mx7: psci: improve cpu hotplug flow
      imx: mx7: add gpc initialization for low power mode
      imx: mx7: add system suspend/resume support

Denis Zalevskiy (6):
      board: ge: Remove EEPROM bus param from read_vpd()
      board: ge: Move VPD EEPROM configuration to the defconfig
      bootcount: i2c: Add bus switching to the I2C bootcount driver
      bootcount: Configure length limit for I2C bootcount
      board: ge: Move VPD reading to the vpd_reader
      board: ge: Store bootcount in EEPROM on PPD and Bx50v3

Martin Kaiser (1):
      watchdog: mx25: use the imx_watchdog driver for mx25

Stefan Agner (2):
      board: toradex: common: fail gracefully on missing NAND chip
      colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support

Stefano Babic (2):
      Merge branch 'master' of git://git.denx.de/u-boot into master
      imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig

Sébastien Szymanski (1):
      ARM: opos6ul: make the board boot again

Ye Li (6):
      imx: imx6sx-sdb: Enable DM QSPI driver
      imx: imx6sx-sabreauto: convert to use DM QSPI driver
      imx: imx7d-sdb: Add DM QSPI support
      dts: imx6ul: Update alias to support DM
      dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
      imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot

 arch/arm/dts/Makefile                             |   7 +-
 arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi         |  16 +
 arch/arm/dts/imx6sx-sabreauto.dts                 |  40 ++
 arch/arm/dts/imx6sx-sdb-u-boot.dtsi               |  16 +
 arch/arm/dts/imx6sx.dtsi                          |  12 +-
 arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi         |  10 +
 arch/arm/dts/imx6ul-14x14-evk.dts                 | 427 +++++++++++++++++++
 arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi           |  10 +
 arch/arm/dts/imx6ul-9x9-evk.dts                   | 471
+++++++++++++++++++++
 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi           |  28 ++
 arch/arm/dts/imx6ul-opos6ul.dtsi                  |   2 -
 arch/arm/dts/imx6ul-opos6uldev-u-boot.dts         |  25 ++
 arch/arm/dts/imx6ul-opos6uldev.dts                |   2 -
 arch/arm/dts/imx6ul.dtsi                          |  13 +-
 arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi           |  10 +
 arch/arm/dts/imx7d-sdb-qspi.dts                   |  44 ++
 arch/arm/dts/imx7d-sdb.dts                        |   6 +-
 arch/arm/dts/imx7d.dtsi                           |  12 +
 arch/arm/dts/imx7s.dtsi                           |  22 +-
 arch/arm/include/asm/arch-mx25/imx-regs.h         |   1 +
 arch/arm/mach-imx/mx7/Makefile                    |   2 +-
 arch/arm/mach-imx/mx7/psci-mx7.c                  | 472
+++++++++++++++++++++-
 arch/arm/mach-imx/mx7/psci-suspend.S              |  67 +++
 arch/arm/mach-imx/mx7/soc.c                       | 103 +++++
 board/freescale/mx6sxsabreauto/mx6sxsabreauto.c   |  24 --
 board/freescale/mx6sxsabresd/mx6sxsabresd.c       |  25 --
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 208 ++--------
 board/freescale/mx7dsabresd/mx7dsabresd.c         |  16 -
 board/ge/bx50v3/Kconfig                           |   2 +
 board/ge/bx50v3/bx50v3.c                          |  57 +--
 board/ge/common/Kconfig                           |  14 +
 board/ge/common/vpd_reader.c                      |  57 ++-
 board/ge/common/vpd_reader.h                      |  16 +-
 board/ge/mx53ppd/Kconfig                          |   2 +
 board/ge/mx53ppd/mx53ppd.c                        |  50 +--
 board/toradex/colibri_imx7/Kconfig                |  42 +-
 board/toradex/colibri_imx7/MAINTAINERS            |   4 +
 board/toradex/colibri_imx7/colibri_imx7.c         |  41 +-
 board/toradex/common/tdx-cfg-block.c              |   7 +-
 configs/ge_bx50v3_defconfig                       |  27 +-
 configs/mx53ppd_defconfig                         |  29 +-
 configs/mx6sxsabreauto_defconfig                  |   2 +
 configs/mx6sxsabresd_defconfig                    |   7 +
 configs/mx6ul_14x14_evk_defconfig                 |  17 +-
 configs/mx6ul_9x9_evk_defconfig                   |  20 +-
 configs/mx7dsabresd_qspi_defconfig                |  84 ++++
 configs/opos6uldev_defconfig                      |   2 +-
 drivers/bootcount/Kconfig                         |  21 +-
 drivers/bootcount/bootcount_i2c.c                 |  78 +++-
 drivers/watchdog/Makefile                         |   2 +-
 include/configs/cl-som-imx7.h                     |   2 -
 include/configs/colibri_imx7.h                    |  90 ++++-
 include/configs/ge_bx50v3.h                       |   6 +-
 include/configs/mx53ppd.h                         |   6 +-
 include/configs/mx6sxsabresd.h                    |   4 +
 include/configs/mx6ul_14x14_evk.h                 |  13 +-
 include/configs/mx7dsabresd.h                     |   4 +-
 57 files changed, 2376 insertions(+), 421 deletions(-)
 create mode 100644 arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6sx-sdb-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-14x14-evk.dts
 create mode 100644 arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-9x9-evk.dts
 create mode 100644 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-opos6uldev-u-boot.dts
 create mode 100644 arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx7d-sdb-qspi.dts
 create mode 100644 arch/arm/mach-imx/mx7/psci-suspend.S
 create mode 100644 board/ge/common/Kconfig
 create mode 100644 configs/mx7dsabresd_qspi_defconfig


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-07-23  9:44 Stefano Babic
@ 2018-07-23 18:16 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2018-07-23 18:16 UTC (permalink / raw)
  To: u-boot

On Mon, Jul 23, 2018 at 11:44:04AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 474ecd2c84d97314b8145fbe3a57887f41b2edb3:
> 
>   env: Simplify Makefile using $(SPL_TPL_) (2018-07-21 12:24:31 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to f97f167107b33fc6596561dae1309571ade39055:
> 
>   configs: imx6q_logic: Cleanup ramdiskaddr and fdtaddr (2018-07-23
> 11:05:54 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180723/cc3a1b43/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-07-23  9:44 Stefano Babic
  2018-07-23 18:16 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-07-23  9:44 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 474ecd2c84d97314b8145fbe3a57887f41b2edb3:

  env: Simplify Makefile using $(SPL_TPL_) (2018-07-21 12:24:31 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to f97f167107b33fc6596561dae1309571ade39055:

  configs: imx6q_logic: Cleanup ramdiskaddr and fdtaddr (2018-07-23
11:05:54 +0200)

----------------------------------------------------------------
Adam Ford (2):
      imx: i.mx6q: imx6q_logic: Migrate to SPL and enable SDP
      configs: imx6q_logic: Cleanup ramdiskaddr and fdtaddr

Baruch Siach (2):
      mmc: drop mention of IN_PROGRESS status
      mx6cuboxi: drop CONFIG_SYS_FSL_USDHC_NUM

Fabio Berton (1):
      pico-imx7d: Add support for update SPL using DFU

Fabio Estevam (7):
      mx7: Remove BMODE support
      pico-imx7d: Convert to distro config
      pico-imx7d: Add fastboot support
      pico-imx7d: Add SPL support
      pico-imx7d: Add Falcon mode support
      pico-imx7d: Enable CONFIG_ARMV7_BOOT_SEC_DEFAULT
      pico-imx7d: Do not override addrmap5

Holger Dengler (1):
      tools/imximage: get HAB information from header

Jon Nettleton (5):
      mmc: break out get_op_cond code to its own function
      mx6cuboxi: Add support for eMMC booting
      mx6cuboxi: Use mmc_get_op_cond() to check for an eMMC
      mx6cuboxi: Add emmc device tree suffix
      mx6cuboxi: Move the default environment for all devices

Ludwig Zenz (4):
      Revert "ARM: imx6: Disable DDR DRAM calibration DHCOM i.MX6 PDK"
      ARM: imx6: configure ddrcode pins in spl DHCOM i.MX6 PDK
      ARM: imx6: DHCOM i.MX6 PDK: ddr init for 32bit bus and 4GBit chips
      ARM: dh_imx6: enable GigaDevice, Macronix, and Winbond SPI Flash
support in Kconfig

Mark Jonas (1):
      arm, imx6: add alternative PAD_CTL_DSE constants

Martin Kaiser (1):
      mx25: fix the offset between the USB ports' registers

Michael Trimarchi (4):
      eth: dm: fec: Add gpio phy reset binding
      imx: mx6: Fix implementantion reset_misc
      imx: imx6: Add comment to gpr_init function
      i.MX6: engicam: gpr_init can be called only for some architecture

Otavio Salvador (9):
      pico-imx7d: Fix common distro configuration behavior
      pico-imx7d: Add GPT partitioning support
      pico-imx7d: Add default DFU targets
      pico-imx7d: Add bootmenu to choose the baseboard
      pico-imx7d: Allow default fdtfile to be overridden by defconfig
      pico-imx7d: Enable auxiliary code support
      pico-imx7d: README: Use dfu-util to flash U-Boot
      pico-imx7d: README: Drop old instructions about secure mode
      pico-imx7d: Add new pico-pi config

Stefan Agner (12):
      mtd: nand: mxs_nand: add device tree support for i.MX 6
      imx: add macro to detect whether USB has been initialized
      ARM: dts: imx6ull: use same compatible string as Linux is using
      board: toradex: add new and upcoming SKUs
      board: toradex: add Colibri iMX6ULL support
      ARM: PSCI: initialize stack pointer on secondary CPUs
      imx: mx7: psci: use C code exclusively
      imx: mx7: psci: provide complete PSCI 1.0 implementation
      imx: mx7: psci: support CPU0 on/off
      imx: mx7: psci: implement MIGRATE_INFO_TYPE
      colibri_imx7: add compatible string used in vanilla Linux
      colibri_imx7: improve DDR3 timing

Stefano Babic (1):
      bootcount: flush after storing the bootcounter

Uri Mashiach (1):
      arm: imx7d: cl-som-imx7: sf: support all SF types

 arch/arm/cpu/armv7/psci.S                       |   2 +
 arch/arm/dts/imx6ull-colibri.dts                | 550
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6ull.dtsi                       |   2 +-
 arch/arm/include/asm/arch-mx25/imx-regs.h       |   7 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h        |   7 ++
 arch/arm/include/asm/mach-imx/iomux-v3.h        |   8 +++
 arch/arm/mach-imx/Kconfig                       |   2 +-
 arch/arm/mach-imx/mx6/Kconfig                   |  11 ++-
 arch/arm/mach-imx/mx6/soc.c                     |   7 ++
 arch/arm/mach-imx/mx7/Kconfig                   |   2 +-
 arch/arm/mach-imx/mx7/Makefile                  |   5 +-
 arch/arm/mach-imx/mx7/psci-mx7.c                | 148
++++++++++++++++++++++++++++++++++++----
 arch/arm/mach-imx/mx7/psci.S                    |  60 ----------------
 arch/arm/mach-imx/mx7/soc.c                     |  25 -------
 board/dhelectronics/dh_imx6/dh_imx6_spl.c       | 227
++++++++++++++++++++++++++++++++++++++++++++++++++++++++----
 board/engicam/common/spl.c                      |   3 +-
 board/logicpd/imx6/imx6logic.c                  | 141
++++++++++++++++++++++++++++++++++++++
 board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg    | 111
------------------------------
 board/solidrun/mx6cuboxi/mx6cuboxi.c            | 115
++++++++++++++++++++++++++++---
 board/technexion/pico-imx7d/Makefile            |   2 +-
 board/technexion/pico-imx7d/README              |  30 +++-----
 board/technexion/pico-imx7d/imximage.cfg        |  97
--------------------------
 board/technexion/pico-imx7d/pico-imx7d.c        |   2 +-
 board/technexion/pico-imx7d/spl.c               | 122
+++++++++++++++++++++++++++++++++
 board/toradex/colibri-imx6ull/Kconfig           |  29 ++++++++
 board/toradex/colibri-imx6ull/MAINTAINERS       |  10 +++
 board/toradex/colibri-imx6ull/Makefile          |   4 ++
 board/toradex/colibri-imx6ull/colibri-imx6ull.c | 408
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/toradex/colibri-imx6ull/imximage.cfg      | 106
++++++++++++++++++++++++++++
 board/toradex/colibri_imx7/colibri_imx7.c       |  20 +-----
 board/toradex/colibri_imx7/imximage.cfg         |  10 +--
 board/toradex/common/tdx-cfg-block.c            |   7 ++
 board/toradex/common/tdx-cfg-block.h            |   7 ++
 configs/cl-som-imx7_defconfig                   |   7 ++
 configs/colibri-imx6ull_defconfig               |  76 +++++++++++++++++++++
 configs/dh_imx6_defconfig                       |   3 +
 configs/imx6q_logic_defconfig                   |  47 +++++++++++--
 configs/pico-imx7d_defconfig                    |  41 ++++++++---
 configs/pico-pi-imx7d_defconfig                 |  59 ++++++++++++++++
 drivers/bootcount/bootcount.c                   |   3 +
 drivers/mmc/mmc.c                               |  61 ++++++++++-------
 drivers/mtd/nand/mxs_nand_dt.c                  |   8 +++
 drivers/net/fec_mxc.c                           |  43 ++++++++++--
 drivers/net/fec_mxc.h                           |   5 +-
 include/configs/colibri-imx6ull.h               | 199
+++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/configs/imx6_logic.h                    |  46 +++++++++----
 include/configs/mx6cuboxi.h                     |  27 ++++----
 include/configs/pico-imx7d.h                    |  94
+++++++++++++------------
 include/mmc.h                                   |  12 +++-
 tools/imximage.c                                |  13 ++--
 50 files changed, 2523 insertions(+), 508 deletions(-)
 create mode 100644 arch/arm/dts/imx6ull-colibri.dts
 delete mode 100644 arch/arm/mach-imx/mx7/psci.S
 delete mode 100644 board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg
 delete mode 100644 board/technexion/pico-imx7d/imximage.cfg
 create mode 100644 board/technexion/pico-imx7d/spl.c
 create mode 100644 board/toradex/colibri-imx6ull/Kconfig
 create mode 100644 board/toradex/colibri-imx6ull/MAINTAINERS
 create mode 100644 board/toradex/colibri-imx6ull/Makefile
 create mode 100644 board/toradex/colibri-imx6ull/colibri-imx6ull.c
 create mode 100644 board/toradex/colibri-imx6ull/imximage.cfg
 create mode 100644 configs/colibri-imx6ull_defconfig
 create mode 100644 configs/pico-pi-imx7d_defconfig
 create mode 100644 include/configs/colibri-imx6ull.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-06-27 15:01 Stefano Babic
@ 2018-06-28  2:21 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2018-06-28  2:21 UTC (permalink / raw)
  To: u-boot

On Wed, Jun 27, 2018 at 05:01:09PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> As discussed in previous thread, I have merged some NAND patches, too
> (see Stefan's and Jorg's patches).
> 
> 
> -- The following changes since commit
> a715415bb5948c84cc44c601b193188990f7238b:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-usb (2018-06-16
> 00:07:37 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to b4cb809289235eb39dc2a3e521d8254da0ad752e:
> 
>   imx: bx50v3: fix Maintainers (2018-06-27 13:02:36 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180627/39225b9e/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-06-27 15:01 Stefano Babic
  2018-06-28  2:21 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-06-27 15:01 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

As discussed in previous thread, I have merged some NAND patches, too
(see Stefan's and Jorg's patches).


-- The following changes since commit
a715415bb5948c84cc44c601b193188990f7238b:

  Merge branch 'master' of git://git.denx.de/u-boot-usb (2018-06-16
00:07:37 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to b4cb809289235eb39dc2a3e521d8254da0ad752e:

  imx: bx50v3: fix Maintainers (2018-06-27 13:02:36 +0200)

----------------------------------------------------------------
Fabio Estevam (3):
      spl: Add default values for ARCH_MX7
      pico-imx7d: Adjust the dtb name
      cl-som-imx7: Remove CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y

Hannes Schmelzer (1):
      drivers/gpio/mxc: fix MXC GPIO name in KConfig

Jagan Teki (2):
      board: engicam: spl: match icore-mipi fit-config
      imx6ul: geam: Fix fdt_file mismatch

Jon Nettleton (2):
      mx6cuboxi: consolidate board detection and add som revision checking
      mx6cuboxi: fix 4GB ddr memory detection

Jörg Krause (4):
      mtd: nand: export nand_get_flash_type function
      spl, nand: add option CONFIG_SPL_NAND_IDENT to lookup for
supported NAND chips
      mtd: nand: mxs_nand_spl: refactor mxs_flash_ident
      mtd: nand: mxs_nand_spl: add mxs_flash_full_ident

Lukasz Majewski (27):
      display5: factory: Add support for BOOT_FROM = FACTORY switch
      display5: config: factory: Setup IP config data according to LEG
production setup
      display5: config: Add "factory" (1MiB) SPI-NOR partition in u-boot
      display5: config: Provide command to flash the whole SPI-NOR memory
      display5: spl: Check return code of the env_* functions
      display5: config: Reset the board when bootm fails
      display5: config: Remove support for Linux initramfs recovery
image boot
      display5: config: Update SPI-NOR partition for larger
swupdate-initramfs
      display5: config: factory: Extend mtdparts to support LEG factory
partition
      display5: Support for the emergency PAD pressing
      display5: wdt: Enable WDT support (both SPL and u-boot)
      display5: config: Provide 'tftp_mmc_rootfs_bkp' command to write
BACKUP rootfs
      display5: config: factory: Update BACKUP rootfs in factory mode
      display5: config: Update swupdate initramfs file name (now
supporting ext4)
      display5: ddr: Enable support for DDR3 auto calibration
      display5: net: Add function to read ethaddr from iMX6 fuses
      display5: config: Add cma=256M to command line arguments
      display5: config: Reduce rootfs2 (BACKUP) size from 1528M to 512M
      display5: display5_defconfig: Enable support for gpt command
(CMD_GPT) in production u-boot
      display5: config: Add GPT verification and restoration code on
SWUpdate entry
      display5: Add missing environment.h include to avoid warning
      board: imx53: Always disable display before starting kernel
      board: Adjust K+P script to run misc (per board) adjustments
      board: Add support for KEY1 status detection on K+P's HSC|DDC boards
      board: Silent out the console on the K+P's imx53 boards
      board: Remove not needed function for the K+P's imx53 board
      config: Update defconfig for imx53 K+P boards

Mans Rullgard (1):
      ARM: mxs: let boards override entire dram parameter table

Otavio Salvador (1):
      wandboard: Remove hardcoded baudrate from "console" variable

Stefan Agner (15):
      mtd: nand: mxs_nand: introduce SPL specific init
      mtd: nand: mxs_nand: use self init
      mtd: nand: mxs_nand: allow to enable BBT support
      mtd: nand: mxs_nand: use structure for BCH geometry
      mtd: nand: mxs_nand: report correct ECC parameters
      mtd: nand: mxs_nand: add minimal ECC support
      mtd: nand: mxs_nand: move register structs to driver data
      mtd: nand: mxs_nand: use more precise function name
      mtd: nand: mxs_nand: separate board/controller init
      mtd: nand: mxs_nand: add use_minimum_ecc to struct
      mtd: nand: mxs_nand: move structs into header file
      mtd: nand: mxs_nand: add device tree support
      mtd: nand: mxs_nand: add support for specific ECC strength
      arm: dts: imx7: sync with Linux
      arm: dts: imx7: colibri: add raw NAND support

Stefano Babic (1):
      imx: bx50v3: fix Maintainers

Trent Piepho (1):
      power: pmic: Let PFUZE3000 see all 256 registers

Ye Li (1):
      imx: Enable ACTLR.SMP bit for all i.MX cortex-a7 platforms

 README                                                                |
  4 +
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c                             |
 14 +--
 arch/arm/dts/Makefile                                                 |
  2 +-
 arch/arm/dts/imx53-kp.dts                                             |
  4 +
 arch/arm/dts/{imx6ul-geam-kit-u-boot.dtsi => imx6ul-geam-u-boot.dtsi} |   0
 arch/arm/dts/{imx6ul-geam-kit.dts => imx6ul-geam.dts}                 |   0
 arch/arm/dts/imx7-colibri.dts                                         |
 28 +++++
 arch/arm/dts/imx7s.dtsi                                               |
491
++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------
 arch/arm/mach-imx/cache.c                                             |
 42 +++++++
 arch/arm/mach-imx/mx7/soc.c                                           |
  7 --
 board/engicam/common/board.c                                          |
  4 +-
 board/engicam/common/spl.c                                            |
  4 +
 board/ge/bx50v3/MAINTAINERS                                           |
  1 +
 board/k+p/bootscripts/tpcboot.cmd                                     |
  6 +
 board/k+p/kp_imx53/kp_imx53.c                                         |
 34 ++++--
 board/liebherr/display5/common.c                                      |
 10 ++
 board/liebherr/display5/common.h                                      |
  1 +
 board/liebherr/display5/display5.c                                    |
 41 +++++++
 board/liebherr/display5/spl.c                                         |
 78 ++++++++++++-
 board/solidrun/mx6cuboxi/mx6cuboxi.c                                  |
182 ++++++++++++++++++++++---------
 common/spl/Kconfig                                                    |
  5 +-
 configs/cl-som-imx7_defconfig                                         |
  1 -
 configs/display5_defconfig                                            |
  6 +-
 configs/display5_factory_defconfig                                    |
  3 +-
 configs/imx6ul_geam_mmc_defconfig                                     |
  2 +-
 configs/imx6ul_geam_nand_defconfig                                    |
  2 +-
 configs/kp_imx53_defconfig                                            |
  6 +
 drivers/gpio/Kconfig                                                  |
  2 +-
 drivers/mtd/nand/Kconfig                                              |
 16 +++
 drivers/mtd/nand/Makefile                                             |
  2 +
 drivers/mtd/nand/mxs_nand.c                                           |
405 ++++++++++++++++++++++++++++++++++++++++---------------------------
 drivers/mtd/nand/mxs_nand.h                                           |
 73 +++++++++++++
 drivers/mtd/nand/mxs_nand_dt.c                                        |
 86 +++++++++++++++
 drivers/mtd/nand/mxs_nand_spl.c                                       |
 40 ++++++-
 drivers/mtd/nand/nand_base.c                                          |
  3 +-
 drivers/power/pmic/pfuze100.c                                         |
  3 +-
 drivers/power/pmic/pmic_pfuze3000.c                                   |
  2 +-
 include/configs/display5.h                                            |
102 ++++++++++-------
 include/configs/kp_imx53.h                                            |
  1 +
 include/configs/mx6cuboxi.h                                           |
 24 ++--
 include/configs/pico-imx7d.h                                          |
  2 +-
 include/configs/wandboard.h                                           |
  2 +-
 include/dt-bindings/clock/imx7d-clock.h                               |
 15 ++-
 include/dt-bindings/power/imx7-power.h                                |
 16 +++
 include/linux/mtd/rawnand.h                                           |
 10 +-
 include/power/pfuze3000_pmic.h                                        |
  2 +-
 scripts/config_whitelist.txt                                          |
  1 +
 47 files changed, 1287 insertions(+), 498 deletions(-)
 rename arch/arm/dts/{imx6ul-geam-kit-u-boot.dtsi =>
imx6ul-geam-u-boot.dtsi} (100%)
 rename arch/arm/dts/{imx6ul-geam-kit.dts => imx6ul-geam.dts} (100%)
 create mode 100644 drivers/mtd/nand/mxs_nand.h
 create mode 100644 drivers/mtd/nand/mxs_nand_dt.c
 create mode 100644 include/dt-bindings/power/imx7-power.h

=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-05-19  2:23 ` Tom Rini
@ 2018-05-21  3:04   ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2018-05-21  3:04 UTC (permalink / raw)
  To: u-boot

On Fri, May 18, 2018 at 10:23:18PM -0400, Tom Rini wrote:
> On Fri, May 18, 2018 at 08:51:42AM +0200, Stefano Babic wrote:
> 
> > Hi Tom,
> > 
> > please pull from u-boot-imx, thanks !
> > 
> > The following changes since commit f2d0f5e7ab3b8a7b4bf6e2ac499b4867c701d52d:
> > 
> >   ARM: re-enable MVGBE for edminiv2 (2018-05-16 11:38:08 -0400)
> > 
> > are available in the git repository at:
> > 
> >   git://www.denx.de/git/u-boot-imx.git master
> > 
> > for you to fetch changes up to ee943655576f4a9e0af832e00a682a8d9f425bb1:
> > 
> >   arm: imx53: Add support for imx53 boards from K+P (2018-05-18 08:29:38
> > +0200)
> > 
> 
> Applied to u-boot/master, along with a follow up to fix SDPX tags,
> thanks!

And, oops, I should have complained:
WARNING: no status info for 'ge_bx50v3'
WARNING: no maintainers for 'ge_bx50v3'

were introduced, please follow-up with a fix, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180520/6218e98e/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-05-18  6:51 Stefano Babic
@ 2018-05-19  2:23 ` Tom Rini
  2018-05-21  3:04   ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2018-05-19  2:23 UTC (permalink / raw)
  To: u-boot

On Fri, May 18, 2018 at 08:51:42AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit f2d0f5e7ab3b8a7b4bf6e2ac499b4867c701d52d:
> 
>   ARM: re-enable MVGBE for edminiv2 (2018-05-16 11:38:08 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to ee943655576f4a9e0af832e00a682a8d9f425bb1:
> 
>   arm: imx53: Add support for imx53 boards from K+P (2018-05-18 08:29:38
> +0200)
> 

Applied to u-boot/master, along with a follow up to fix SDPX tags,
thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180518/eddc9376/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-05-18  6:51 Stefano Babic
  2018-05-19  2:23 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-05-18  6:51 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit f2d0f5e7ab3b8a7b4bf6e2ac499b4867c701d52d:

  ARM: re-enable MVGBE for edminiv2 (2018-05-16 11:38:08 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to ee943655576f4a9e0af832e00a682a8d9f425bb1:

  arm: imx53: Add support for imx53 boards from K+P (2018-05-18 08:29:38
+0200)

----------------------------------------------------------------
Guillaume GARDET (2):
      imx6: Convert sabrelite and nitrogen6x boards to distro boot support
      imx6: sabrelite: update defconfig to use distro defaults

Ian Ray (6):
      board: ge: bx50v3: add winbond SPI NOR support
      board: ge: bx50v3: rename detect_baseboard function
      board: ge: bx50v3: fix display support for b{46}50v3
      board: ge: bx50v3: use VPD instead of compile-time checks
      board: ge: bx50v3: configure video arguments using VPD
      board: ge: bx50v3: remove redundant targets

Jagan Teki (11):
      ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl
      ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi
      ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl
      ARM: i.MX6: dts: Build dtb based on SOC type
      i.MX6: board: Add BTicino i.MX6DL Mamoj initial support
      i.MX6DL: mamoj: Add I2C support
      i.MX6DL: mamoj: Add PFUZE100 support
      configs: imx6dl_mamoj: Enable fastboot and ums
      configs: imx6dl-mamoj: Add DFU support
      configs: imx6dl-mamoj: Add Falcon mode support
      configs: imx6dl-mamoj: Enable HAB

Lukasz Majewski (14):
      dts: imx53: Add gpio and i2c nodes to imx53.dtsi file
      dts: pinctrl: Provide IMX_PAD_SION definition for imx53 pinctrl
      pmic: fsl: Provide some more definitions for MC34708 PMIC
      pmic: fsl: Define number of bytes sent at once by MC34708 PMIC
      pmic: Add support for setting transmission length in uclass
private data
      pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3
bytes transmissions
      pmic: dm: Add support for MC34708 for PMIC DM
      pmic: Rewrite the pmic command to not only work with single byte
transmission
      sandbox: Rewrite i2c_pmic_emul.c to support PMIC with 3 bytes
transmission
      sandbox: Enable support for MC34708 PMIC in DTS
      sandbox: Enable MC34708 PMIC support
      sandbox: tests: Exclude common test code (pmic_get) in test/dm/pmic.c
      sandbox: tests: Add tests for mc34708 PMIC device
      arm: imx53: Add support for imx53 boards from K+P

Magnus Lilja (2):
      mx31pdk: Convert CONFIG_MX31 flag to use Kconfig.
      mx31: Convert MX31_HCLK_FREQ and MX31_CLK32 to Kconfig.

Nandor Han (2):
      board: ge: bx50v3: unify two switch statements
      board: ge: bx50v3: detect the monitor type by reading VPD earlier

Peter Robinson (4):
      mx6 common: remove dangling comment
      mx7: remove empty ifndef statement
      mx6: Select CONFIG_MP with MX6_SMP
      mx6: remove duplicated BOUNCE_BUFFER defines

Sebastian Reichel (1):
      ge: ppd: move CONFIG_ENV_IS_IN_MMC to defconfig

 arch/arm/Kconfig                                     |  14 ++-
 arch/arm/dts/Makefile                                |  19 ++--
 arch/arm/dts/imx53-kp.dts                            | 135
+++++++++++++++++++++++++++++
 arch/arm/dts/imx53-pinfunc.h                         |   1 +
 arch/arm/dts/imx53.dtsi                              | 101
+++++++++++++++++++++-
 arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi           |  11 +++
 arch/arm/dts/imx6dl-icore-mipi.dts                   |   1 -
 arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi            |   7 ++
 arch/arm/dts/imx6dl-icore-u-boot.dtsi                |   7 ++
 arch/arm/dts/imx6dl-mamoj-u-boot.dtsi                |  15 ++++
 arch/arm/dts/imx6dl-mamoj.dts                        | 225
++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi            |  11 +++
 arch/arm/dts/imx6q-icore-mipi.dts                    |   1 -
 arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi             |   7 ++
 arch/arm/dts/imx6q-icore-u-boot.dtsi                 |   7 ++
 arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi           |  23 +++++
 arch/arm/dts/imx6qdl-icore-rqs.dtsi                  |   4 -
 arch/arm/dts/imx6qdl-icore-u-boot.dtsi               |  19 ++++
 arch/arm/dts/imx6qdl-icore.dtsi                      |   3 -
 arch/arm/dts/imx6qdl-u-boot.dtsi                     |  27 ++++++
 arch/arm/dts/imx6qdl.dtsi                            |   5 --
 arch/arm/dts/imx6ul-geam-kit-u-boot.dtsi             |  25 ++++++
 arch/arm/dts/imx6ul-geam-kit.dts                     |   4 -
 arch/arm/dts/imx6ul-isiot-emmc-u-boot.dtsi           |  11 +++
 arch/arm/dts/imx6ul-isiot-emmc.dts                   |  25 +-----
 arch/arm/dts/imx6ul-isiot-nand.dts                   |   1 +
 arch/arm/dts/imx6ul-isiot-u-boot.dtsi                |  19 ++++
 arch/arm/dts/imx6ul-isiot.dtsi                       |  29 ++++++-
 arch/arm/dts/imx6ul-u-boot.dtsi                      |  31 +++++++
 arch/arm/dts/imx6ul.dtsi                             |   6 --
 arch/arm/include/asm/arch-mx31/clock.h               |   8 --
 arch/arm/mach-imx/mx3/Kconfig                        |  34 ++++++++
 arch/arm/mach-imx/mx5/Kconfig                        |  12 +++
 arch/arm/mach-imx/mx6/Kconfig                        |  47 +++++++---
 arch/sandbox/dts/sandbox.dts                         |   4 +
 arch/sandbox/dts/sandbox64.dts                       |   4 +
 arch/sandbox/dts/sandbox_pmic.dtsi                   |  33 +++++++
 arch/sandbox/dts/test.dts                            |   4 +
 board/bticino/mamoj/Kconfig                          |  12 +++
 board/bticino/mamoj/MAINTAINERS                      |  10 +++
 board/bticino/mamoj/Makefile                         |   8 ++
 board/bticino/mamoj/README                           | 124
++++++++++++++++++++++++++
 board/bticino/mamoj/mamoj.c                          |  27 ++++++
 board/bticino/mamoj/spl.c                            | 172
++++++++++++++++++++++++++++++++++++
 board/engicam/imx6q/MAINTAINERS                      |  11 ++-
 board/engicam/imx6ul/MAINTAINERS                     |   5 ++
 board/ge/bx50v3/Kconfig                              |   2 +-
 board/ge/bx50v3/bx50v3.c                             |  71 +++++++++------
 board/k+p/kp_imx53/Kconfig                           |  15 ++++
 board/k+p/kp_imx53/MAINTAINERS                       |   6 ++
 board/k+p/kp_imx53/Makefile                          |   8 ++
 board/k+p/kp_imx53/kp_id_rev.c                       | 121
++++++++++++++++++++++++++
 board/k+p/kp_imx53/kp_id_rev.h                       |  28 ++++++
 board/k+p/kp_imx53/kp_imx53.c                        | 212
+++++++++++++++++++++++++++++++++++++++++++++
 cmd/pmic.c                                           |  31 ++++---
 configs/ge_b650v3_defconfig                          |  43 ---------
 configs/ge_b850v3_defconfig                          |  43 ---------
 configs/{ge_b450v3_defconfig => ge_bx50v3_defconfig} |   4 +-
 configs/imx6dl_mamoj_defconfig                       |  52 +++++++++++
 configs/kp_imx53_defconfig                           |  40 +++++++++
 configs/mx31pdk_defconfig                            |   3 +-
 configs/mx53ppd_defconfig                            |   1 +
 configs/mx6qsabrelite_defconfig                      |  15 ++--
 configs/sandbox_defconfig                            |   1 +
 configs/sandbox_flattree_defconfig                   |   1 +
 configs/sandbox_spl_defconfig                        |   1 +
 drivers/power/pmic/Kconfig                           |   7 ++
 drivers/power/pmic/Makefile                          |   1 +
 drivers/power/pmic/i2c_pmic_emul.c                   |  45 +++++++---
 drivers/power/pmic/mc34708.c                         | 105
++++++++++++++++++++++
 drivers/power/pmic/pmic-uclass.c                     |  52 ++++++++---
 include/configs/advantech_dms-ba16.h                 |   1 -
 include/configs/apalis_imx6.h                        |   1 -
 include/configs/colibri_imx6.h                       |   1 -
 include/configs/dh_imx6.h                            |   1 -
 include/configs/ge_bx50v3.h                          |  17 +---
 include/configs/imx6dl-mamoj.h                       | 102
++++++++++++++++++++++
 include/configs/kp_imx53.h                           | 113
++++++++++++++++++++++++
 include/configs/kp_imx6q_tpc.h                       |   2 -
 include/configs/mx31pdk.h                            |   2 -
 include/configs/mx53ppd.h                            |   1 -
 include/configs/mx6_common.h                         |   3 -
 include/configs/mx7_common.h                         |   3 -
 include/configs/nitrogen6x.h                         | 179
+++++++++-----------------------------
 include/fsl_pmic.h                                   |  41 +++++++++
 include/power/pmic.h                                 |   9 ++
 test/dm/pmic.c                                       |  68 ++++++++++++++-
 87 files changed, 2344 insertions(+), 417 deletions(-)
 create mode 100644 arch/arm/dts/imx53-kp.dts
 create mode 100644 arch/arm/dts/imx6dl-icore-mipi-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-icore-rqs-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-icore-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-mamoj-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-mamoj.dts
 create mode 100644 arch/arm/dts/imx6q-icore-mipi-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-icore-rqs-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-icore-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-icore-rqs-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-icore-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-geam-kit-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-isiot-emmc-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-isiot-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-u-boot.dtsi
 create mode 100644 arch/arm/mach-imx/mx3/Kconfig
 create mode 100644 board/bticino/mamoj/Kconfig
 create mode 100644 board/bticino/mamoj/MAINTAINERS
 create mode 100644 board/bticino/mamoj/Makefile
 create mode 100644 board/bticino/mamoj/README
 create mode 100644 board/bticino/mamoj/mamoj.c
 create mode 100644 board/bticino/mamoj/spl.c
 create mode 100644 board/k+p/kp_imx53/Kconfig
 create mode 100644 board/k+p/kp_imx53/MAINTAINERS
 create mode 100644 board/k+p/kp_imx53/Makefile
 create mode 100644 board/k+p/kp_imx53/kp_id_rev.c
 create mode 100644 board/k+p/kp_imx53/kp_id_rev.h
 create mode 100644 board/k+p/kp_imx53/kp_imx53.c
 delete mode 100644 configs/ge_b650v3_defconfig
 delete mode 100644 configs/ge_b850v3_defconfig
 rename configs/{ge_b450v3_defconfig => ge_bx50v3_defconfig} (93%)
 create mode 100644 configs/imx6dl_mamoj_defconfig
 create mode 100644 configs/kp_imx53_defconfig
 create mode 100644 drivers/power/pmic/mc34708.c
 create mode 100644 include/configs/imx6dl-mamoj.h
 create mode 100644 include/configs/kp_imx53.h


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-05-17 15:50 Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2018-05-17 15:50 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit f2d0f5e7ab3b8a7b4bf6e2ac499b4867c701d52d:

  ARM: re-enable MVGBE for edminiv2 (2018-05-16 11:38:08 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 2f5988533d5c447d7bda79b0d9719f84db9e1835:

  imx6: sabrelite: update defconfig to use distro defaults (2018-05-17
17:47:17 +0200)

----------------------------------------------------------------
Guillaume GARDET (2):
      imx6: Convert sabrelite and nitrogen6x boards to distro boot support
      imx6: sabrelite: update defconfig to use distro defaults

Ian Ray (6):
      board: ge: bx50v3: add winbond SPI NOR support
      board: ge: bx50v3: rename detect_baseboard function
      board: ge: bx50v3: fix display support for b{46}50v3
      board: ge: bx50v3: use VPD instead of compile-time checks
      board: ge: bx50v3: configure video arguments using VPD
      board: ge: bx50v3: remove redundant targets

Lukasz Majewski (8):
      dts: imx53: Add gpio and i2c nodes to imx53.dtsi file
      dts: pinctrl: Provide IMX_PAD_SION definition for imx53 pinctrl
      pmic: fsl: Provide some more definitions for MC34708 PMIC
      pmic: fsl: Define number of bytes sent at once by MC34708 PMIC
      pmic: dm: Provide *trans_len() callback for pmic-uclass
      pmic: dm: Rewrite pmic_reg_{read|write} and pmic_clrsetbits to
support transmissions larger than 1 byte
      pmic: dm: Add support for MC34708 for PMIC DM
      arm: imx53: Add support for imx53 boards from K+P

Magnus Lilja (2):
      mx31pdk: Convert CONFIG_MX31 flag to use Kconfig.
      mx31: Convert MX31_HCLK_FREQ and MX31_CLK32 to Kconfig.

Nandor Han (2):
      board: ge: bx50v3: unify two switch statements
      board: ge: bx50v3: detect the monitor type by reading VPD earlier

Peter Robinson (4):
      mx6 common: remove dangling comment
      mx7: remove empty ifndef statement
      mx6: Select CONFIG_MP with MX6_SMP
      mx6: remove duplicated BOUNCE_BUFFER defines

Sebastian Reichel (1):
      ge: ppd: move CONFIG_ENV_IS_IN_MMC to defconfig

 arch/arm/Kconfig                                     |  14 +++----
 arch/arm/dts/imx53-kp.dts                            | 135
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx53-pinfunc.h                         |   1 +
 arch/arm/dts/imx53.dtsi                              | 101
+++++++++++++++++++++++++++++++++++++++++++++++-
 arch/arm/include/asm/arch-mx31/clock.h               |   8 ----
 arch/arm/mach-imx/mx3/Kconfig                        |  34
+++++++++++++++++
 arch/arm/mach-imx/mx5/Kconfig                        |  12 ++++++
 arch/arm/mach-imx/mx6/Kconfig                        |  15 ++------
 board/ge/bx50v3/Kconfig                              |   2 +-
 board/ge/bx50v3/bx50v3.c                             |  71
++++++++++++++++++++++------------
 board/k+p/kp_imx53/Kconfig                           |  15 ++++++++
 board/k+p/kp_imx53/MAINTAINERS                       |   6 +++
 board/k+p/kp_imx53/Makefile                          |   8 ++++
 board/k+p/kp_imx53/kp_id_rev.c                       | 121
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/k+p/kp_imx53/kp_id_rev.h                       |  28 ++++++++++++++
 board/k+p/kp_imx53/kp_imx53.c                        | 212
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 configs/ge_b650v3_defconfig                          |  43
---------------------
 configs/ge_b850v3_defconfig                          |  43
---------------------
 configs/{ge_b450v3_defconfig => ge_bx50v3_defconfig} |   4 +-
 configs/kp_imx53_defconfig                           |  40
+++++++++++++++++++
 configs/mx31pdk_defconfig                            |   3 +-
 configs/mx53ppd_defconfig                            |   1 +
 configs/mx6qsabrelite_defconfig                      |  15 +++-----
 drivers/power/pmic/Kconfig                           |   7 ++++
 drivers/power/pmic/Makefile                          |   1 +
 drivers/power/pmic/mc34708.c                         | 103
+++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/power/pmic/pmic-uclass.c                     |  48
+++++++++++++++++------
 include/configs/advantech_dms-ba16.h                 |   1 -
 include/configs/apalis_imx6.h                        |   1 -
 include/configs/colibri_imx6.h                       |   1 -
 include/configs/dh_imx6.h                            |   1 -
 include/configs/ge_bx50v3.h                          |  17 +--------
 include/configs/kp_imx53.h                           | 113
++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/configs/kp_imx6q_tpc.h                       |   2 -
 include/configs/mx31pdk.h                            |   2 -
 include/configs/mx53ppd.h                            |   1 -
 include/configs/mx6_common.h                         |   3 --
 include/configs/mx7_common.h                         |   3 --
 include/configs/nitrogen6x.h                         | 179
+++++++++++++++++++++----------------------------------------------------------------
 include/fsl_pmic.h                                   |  41
++++++++++++++++++++
 include/power/pmic.h                                 |   2 +
 41 files changed, 1126 insertions(+), 332 deletions(-)
 create mode 100644 arch/arm/dts/imx53-kp.dts
 create mode 100644 arch/arm/mach-imx/mx3/Kconfig
 create mode 100644 board/k+p/kp_imx53/Kconfig
 create mode 100644 board/k+p/kp_imx53/MAINTAINERS
 create mode 100644 board/k+p/kp_imx53/Makefile
 create mode 100644 board/k+p/kp_imx53/kp_id_rev.c
 create mode 100644 board/k+p/kp_imx53/kp_id_rev.h
 create mode 100644 board/k+p/kp_imx53/kp_imx53.c
 delete mode 100644 configs/ge_b650v3_defconfig
 delete mode 100644 configs/ge_b850v3_defconfig
 rename configs/{ge_b450v3_defconfig => ge_bx50v3_defconfig} (93%)
 create mode 100644 configs/kp_imx53_defconfig
 create mode 100644 drivers/power/pmic/mc34708.c
 create mode 100644 include/configs/kp_imx53.h


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-04-30 10:51 Stefano Babic
@ 2018-04-30 16:15 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2018-04-30 16:15 UTC (permalink / raw)
  To: u-boot

On Mon, Apr 30, 2018 at 12:51:28PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-.boot-imx, thanks !
> 
> The following changes since commit 5512f5ccf1dc5cec068f8efa1d8ce81f51a988d3:
> 
>   Merge git://git.denx.de/u-boot-video (2018-04-24 20:27:43 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 07a8f79ee850b1e59371519f179d32fea171bbec:
> 
>   ARM: mxs: support full SPL framework (2018-04-27 09:32:54 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180430/b9dc8fb2/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-04-30 10:51 Stefano Babic
  2018-04-30 16:15 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-04-30 10:51 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-.boot-imx, thanks !

The following changes since commit 5512f5ccf1dc5cec068f8efa1d8ce81f51a988d3:

  Merge git://git.denx.de/u-boot-video (2018-04-24 20:27:43 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 07a8f79ee850b1e59371519f179d32fea171bbec:

  ARM: mxs: support full SPL framework (2018-04-27 09:32:54 +0200)

----------------------------------------------------------------
Bryan O'Donoghue (20):
      tools/imximage: Fix fruity lack of 0x prefix in DCD Blocks
      imximage: Specify default IVT offset in IMX image
      warp7: hab: Add a CSF location definition
      warp7: hab: Set environment variable indicating HAB enable
      warp7: defconfig: Enable OPTEE for WaRP7
      warp7: Allocate specific region of memory to OPTEE
      warp7: Print out the OPTEE DRAM region
      warp7: Specify CONFIG_OPTEE_LOAD_ADDR
      warp7: defconfig: Enable CONFIG_SECURE_BOOT
      warp7: defconfig: Enable CONFIG_BOOTM_TEE
      warp7: Make CONFIG_SYS_FDT_ADDR a define
      warp7: Add Kconfig WARP7_ROOT_PART
      warp7: select uuid partition based on rootpart
      warp7: Define the name of a signed boot-script file
      warp7: add warp7_auth_or_fail
      warp7: hab: Set environment variable indicating IVT offset
      warp7: defconfig: Enable CMD_SETEXPR
      warp7: Add support for automated secure boot.scr verification
      warp7: secure_defconfig: Remove secure_defconfig
      warp7: defconfig: Fix CAAM on boot with tip-of-tree

Fabio Estevam (2):
      mx7dsabresd: Remove the mx7dsabresd_secure_defconfig target
      Revert "imximage: Remove failure when no IVT offset is found"

Lukasz Majewski (2):
      eth: dm: fec: Change FEC PHY mask setting from CONFIG_PHYLIB to
CONFIG_FEC_MXC_PHYADDR
      dts: dm: fec: imx53: Provide proper compatible string for imx53
fec driver

Mans Rullgard (5):
      ARM: mxs: make lowlevel_init() weak
      ARM: arm926ejs: fix lowlevel_init call
      ARM: spl: include arm/thumb glue sections
      ARM: mxs: move spl data
      ARM: mxs: support full SPL framework

Mark Jonas (1):
      arm,imx6: fix PAD_CTL_SPEED_LOW constant

Pierre-Jean TEXIER (2):
      warp7: include/configs: use generic fs commands in
CONFIG_EXTRA_ENV_SETTINGS
      warp7: configs: enable CONFIG_CMD_FS_GENERIC

Sébastien Szymanski (2):
      imx6ul: opos6ul: add SPL_DM support
      imx6ul: opos6ul: in Serial Downloader boot mode use ymodem

 arch/arm/Kconfig                                 |  2 +-
 arch/arm/cpu/arm926ejs/mxs/Makefile              |  4 ++--
 arch/arm/cpu/arm926ejs/mxs/mxs.c                 |  8 +++-----
 arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg |  5 +++++
 arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx28.cfg |  6 ++++++
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c            |  5 +++--
 arch/arm/cpu/arm926ejs/start.S                   |  4 ++--
 arch/arm/cpu/u-boot-spl.lds                      |  1 +
 arch/arm/dts/imx6ul-opos6ul.dtsi                 |  4 +++-
 arch/arm/dts/imx6ul-opos6uldev.dts               |  2 ++
 arch/arm/dts/imx6ul.dtsi                         |  1 +
 arch/arm/include/asm/arch-mx6/opos6ul.h          |  4 ----
 arch/arm/include/asm/arch-mxs/sys_proto.h        |  2 ++
 arch/arm/include/asm/mach-imx/iomux-v3.h         |  6 +++---
 arch/arm/mach-imx/mx6/Kconfig                    |  4 ++++
 arch/arm/mach-imx/mx6/opos6ul.c                  | 54
+++++++++++++-----------------------------------------
 board/armadeus/opos6uldev/board.c                | 20 +-------------------
 board/freescale/mx7dsabresd/MAINTAINERS          |  1 -
 board/warp7/Kconfig                              | 14 ++++++++++++++
 board/warp7/MAINTAINERS                          |  1 -
 board/warp7/imximage.cfg                         |  4 ++++
 board/warp7/warp7.c                              | 23
+++++++++++++++++++++++
 configs/mx7dsabresd_defconfig                    |  1 +
 configs/mx7dsabresd_secure_defconfig             | 78
------------------------------------------------------------------------------
 configs/opos6uldev_defconfig                     |  5 +++++
 configs/warp7_defconfig                          |  8 +++++++-
 configs/warp7_secure_defconfig                   | 43
-------------------------------------------
 drivers/net/fec_mxc.c                            |  3 ++-
 include/configs/mxs.h                            |  2 ++
 include/configs/opos6uldev.h                     |  9 +++------
 include/configs/warp7.h                          | 28
+++++++++++++++++++++++-----
 include/imximage.h                               |  3 +++
 tools/imximage.c                                 |  7 ++++++-
 33 files changed, 145 insertions(+), 217 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg
 create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx28.cfg
 delete mode 100644 configs/mx7dsabresd_secure_defconfig
 delete mode 100644 configs/warp7_secure_defconfig


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-04-15 17:52 ` Tom Rini
@ 2018-04-15 19:53   ` Lukasz Majewski
  0 siblings, 0 replies; 307+ messages in thread
From: Lukasz Majewski @ 2018-04-15 19:53 UTC (permalink / raw)
  To: u-boot

Hi Tom,

> On Sun, Apr 15, 2018 at 12:28:54PM +0200, Stefano Babic wrote:
> 
> > Hi Tom,
> > 
> > please pull from u-boot-imx, thanks !
> > 
> > 
> > -- The following changes since commit
> > 6d7403bf72b5ea46497fe8222d0303cb79563379:
> > 
> >   doc: mxc_hab: Update i.MX HAB documentation (2018-03-11 16:00:21
> > +0100)
> > 
> > are available in the git repository at:
> > 
> >   git://www.denx.de/git/u-boot-imx.git master
> > 
> > for you to fetch changes up to
> > b4e9bdcd05ac83146ad16802a94db3e78f530d1a:
> > 
> >   mx6cuboxi: Fix some memory configuration errors (2018-04-15
> > 11:56:21 +0200)
> >   
> 
> Applied to u-boot/master.
> 
> For the record, the K+P KP_IMX6Q_TPC i.MX6Q commit is missing a
> Signed-off-by line.  I'm willing to assume it was just a thinko, right
> Lukasz ?  Thanks!
> 

Yes, this is my commit :-)



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180415/a169e07f/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-04-15 10:28 Stefano Babic
@ 2018-04-15 17:52 ` Tom Rini
  2018-04-15 19:53   ` Lukasz Majewski
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2018-04-15 17:52 UTC (permalink / raw)
  To: u-boot

On Sun, Apr 15, 2018 at 12:28:54PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> 
> -- The following changes since commit
> 6d7403bf72b5ea46497fe8222d0303cb79563379:
> 
>   doc: mxc_hab: Update i.MX HAB documentation (2018-03-11 16:00:21 +0100)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to b4e9bdcd05ac83146ad16802a94db3e78f530d1a:
> 
>   mx6cuboxi: Fix some memory configuration errors (2018-04-15 11:56:21
> +0200)
> 

Applied to u-boot/master.

For the record, the K+P KP_IMX6Q_TPC i.MX6Q commit is missing a
Signed-off-by line.  I'm willing to assume it was just a thinko, right
Lukasz ?  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180415/12e36b2c/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-04-15 10:28 Stefano Babic
  2018-04-15 17:52 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-04-15 10:28 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !


-- The following changes since commit
6d7403bf72b5ea46497fe8222d0303cb79563379:

  doc: mxc_hab: Update i.MX HAB documentation (2018-03-11 16:00:21 +0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to b4e9bdcd05ac83146ad16802a94db3e78f530d1a:

  mx6cuboxi: Fix some memory configuration errors (2018-04-15 11:56:21
+0200)

----------------------------------------------------------------
Anatolij Gustschin (1):
      imx: fix CAAM base for i.MX6UL

Bryan O'Donoghue (6):
      imx: mx7: Fix CONFIG_SERIAL_TAG compilation
      imx: mx7: Add comment to describe OTP TESTER registers
      warp7: Set u-boot serial# based on OTP value
      imximage: Encase majority of header in __ASSEMBLY__ declaration
      imx: hab: Provide hab_auth_img_or_fail command
      imx: mx7: snvs: Add an SNVS init routine

Eran Matityahu (4):
      mx7_common: Fix SPL compilation with secure boot support enabled
      Makefile: Build firmware-ivt image type for HAB verification also
for mx7
      imx7: Add src_base structure define macro
      imx7: spl: Check for Serial Downloader in spl_boot_device

Heinrich Schuchardt (1):
      wandboard: remove superfluous include

Ian Ray (1):
      board: ge: bx50v3: enable backlight on demand

Jon Nettleton (1):
      mx6cuboxi: Fix some memory configuration errors

Jörg Krause (2):
      ARM: dts: imx6ul: add wdog3
      ARM: dts: imx6ull: add wdog3

Ken Lin (1):
      arm: imx: Add Winbond SPI-NOR support for Advantech DMS-BA16 board

Lukasz Majewski (2):
      imx: board: Add support for the K+P's kp_imx6q_tpc board
      boot: script: The boot.scr file for K+P's boards

Marek Vasut (1):
      ARM: mx6: ddr: Add write leveling correction code

Nandor Han (1):
      board: ge: ppd: Fix environment variable location

Rasmus Villemoes (2):
      Makefile: always preserve output for images that can contain HAB
Blocks
      tools/imximage: use 0x prefix in HAB Blocks line

Sriram Dash (2):
      drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig
      drivers: i2c: mxc: Update support to 8 I2C controllers

Tom Rini (2):
      imx31_phycore: Delete
      mx31ads: Delete

Trent Piepho (1):
      imx: Create distinct pre-processed mkimage config files

Vanessa Maegima (1):
      pico-imx7d: Replace fatload command

 Makefile                                  |   8 +-
 arch/arm/Kconfig                          |  18 ----
 arch/arm/cpu/armv8/fsl-layerscape/Kconfig |  23 +++++
 arch/arm/dts/imx6ul.dtsi                  |   8 ++
 arch/arm/dts/imx6ull.dtsi                 |   8 ++
 arch/arm/include/asm/arch-mx6/imx-regs.h  |   4 +
 arch/arm/include/asm/arch-mx7/imx-regs.h  |   2 +
 arch/arm/include/asm/mach-imx/sys_proto.h |   1 +
 arch/arm/mach-imx/Makefile                |  15 +--
 arch/arm/mach-imx/hab.c                   |  35 +++++++
 arch/arm/mach-imx/mx6/Kconfig             |  11 ++
 arch/arm/mach-imx/mx6/ddr.c               |  24 +++++
 arch/arm/mach-imx/mx7/Makefile            |   2 +-
 arch/arm/mach-imx/mx7/snvs.c              |  22 ++++
 arch/arm/mach-imx/mx7/soc.c               |  24 +++++
 arch/arm/mach-imx/spl.c                   |  23 +++++
 board/freescale/mx31ads/Kconfig           |  15 ---
 board/freescale/mx31ads/MAINTAINERS       |   6 --
 board/freescale/mx31ads/Makefile          |   8 --
 board/freescale/mx31ads/lowlevel_init.S   | 268
------------------------------------------------
 board/freescale/mx31ads/mx31ads.c         | 114 ---------------------
 board/freescale/mx31ads/u-boot.lds        | 110 --------------------
 board/ge/bx50v3/bx50v3.c                  |  45 ++++----
 board/imx31_phycore/Kconfig               |  12 ---
 board/imx31_phycore/MAINTAINERS           |  11 --
 board/imx31_phycore/Makefile              |   9 --
 board/imx31_phycore/imx31_phycore.c       | 154
----------------------------
 board/imx31_phycore/lowlevel_init.S       |  88 ----------------
 board/k+p/bootscripts/tpcboot.cmd         |  96 ++++++++++++++++++
 board/k+p/kp_imx6q_tpc/Kconfig            |  12 +++
 board/k+p/kp_imx6q_tpc/MAINTAINERS        |   6 ++
 board/k+p/kp_imx6q_tpc/Makefile           |  11 ++
 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c     | 302
++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c | 338
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/solidrun/mx6cuboxi/mx6cuboxi.c      |   3 +-
 board/wandboard/wandboard.c               |   1 -
 board/warp7/warp7.c                       |  14 +++
 configs/dms-ba16-1g_defconfig             |   1 +
 configs/dms-ba16_defconfig                |   1 +
 configs/imx31_phycore_defconfig           |  19 ----
 configs/imx31_phycore_eet_defconfig       |  25 -----
 configs/kp_imx6q_tpc_defconfig            |  42 ++++++++
 configs/mx31ads_defconfig                 |  15 ---
 configs/pico-imx7d_defconfig              |   1 +
 doc/README.mxc_hab                        |  14 +--
 drivers/i2c/Kconfig                       | 169
++++++++++++++++++++++++++++++-
 drivers/i2c/mxc_i2c.c                     |  56 ++++++++++
 drivers/video/Makefile                    |   1 -
 drivers/video/s6e63d6.c                   |  60 -----------
 include/configs/ge_bx50v3.h               |   1 +
 include/configs/imx31_phycore.h           | 156
----------------------------
 include/configs/kp_imx6q_tpc.h            | 141 ++++++++++++++++++++++++++
 include/configs/ls1012a_common.h          |   3 -
 include/configs/ls1043a_common.h          |   5 -
 include/configs/ls1046a_common.h          |   5 -
 include/configs/ls1088a_common.h          |   5 -
 include/configs/ls2080a_common.h          |   5 -
 include/configs/ls2080a_emu.h             |   3 -
 include/configs/ls2080a_simu.h            |   3 -
 include/configs/mx31ads.h                 | 145 --------------------------
 include/configs/mx53ppd.h                 |   4 +-
 include/configs/mx7_common.h              |   3 +
 include/configs/pico-imx7d.h              |   4 +-
 include/configs/warp7.h                   |   3 +
 include/imximage.h                        |   2 +
 include/s6e63d6.h                         |  21 ----
 scripts/Makefile.lib                      |   2 +-
 scripts/Makefile.spl                      |   2 +-
 tools/imximage.c                          |   2 +-
 69 files changed, 1439 insertions(+), 1331 deletions(-)
 create mode 100644 arch/arm/mach-imx/mx7/snvs.c
 delete mode 100644 board/freescale/mx31ads/Kconfig
 delete mode 100644 board/freescale/mx31ads/MAINTAINERS
 delete mode 100644 board/freescale/mx31ads/Makefile
 delete mode 100644 board/freescale/mx31ads/lowlevel_init.S
 delete mode 100644 board/freescale/mx31ads/mx31ads.c
 delete mode 100644 board/freescale/mx31ads/u-boot.lds
 delete mode 100644 board/imx31_phycore/Kconfig
 delete mode 100644 board/imx31_phycore/MAINTAINERS
 delete mode 100644 board/imx31_phycore/Makefile
 delete mode 100644 board/imx31_phycore/imx31_phycore.c
 delete mode 100644 board/imx31_phycore/lowlevel_init.S
 create mode 100644 board/k+p/bootscripts/tpcboot.cmd
 create mode 100644 board/k+p/kp_imx6q_tpc/Kconfig
 create mode 100644 board/k+p/kp_imx6q_tpc/MAINTAINERS
 create mode 100644 board/k+p/kp_imx6q_tpc/Makefile
 create mode 100644 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
 create mode 100644 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c
 delete mode 100644 configs/imx31_phycore_defconfig
 delete mode 100644 configs/imx31_phycore_eet_defconfig
 create mode 100644 configs/kp_imx6q_tpc_defconfig
 delete mode 100644 configs/mx31ads_defconfig
 delete mode 100644 drivers/video/s6e63d6.c
 delete mode 100644 include/configs/imx31_phycore.h
 create mode 100644 include/configs/kp_imx6q_tpc.h
 delete mode 100644 include/configs/mx31ads.h
 delete mode 100644 include/s6e63d6.h

=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-03-11 15:07 Stefano Babic
@ 2018-03-11 19:30 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2018-03-11 19:30 UTC (permalink / raw)
  To: u-boot

On Sun, Mar 11, 2018 at 04:07:29PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> this contains the last fixes sent on Friday. There are still concerns
> last Bryan's patch:
> 	
> 	imx: hab: Convert DCD non-NULL error to warning
> 
> This is still under discussion (and it is not part of my PR).
> 
> The following changes since commit 2e5c42c630c4c550abf9d8da8cc11d8a7928ab0a:
> 
>   Merge git://git.denx.de/u-boot-imx (2018-03-09 13:29:58 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 6d7403bf72b5ea46497fe8222d0303cb79563379:
> 
>   doc: mxc_hab: Update i.MX HAB documentation (2018-03-11 16:00:21 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180311/583f04a0/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-03-11 15:07 Stefano Babic
  2018-03-11 19:30 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-03-11 15:07 UTC (permalink / raw)
  To: u-boot

Hi Tom,

this contains the last fixes sent on Friday. There are still concerns
last Bryan's patch:
	
	imx: hab: Convert DCD non-NULL error to warning

This is still under discussion (and it is not part of my PR).

The following changes since commit 2e5c42c630c4c550abf9d8da8cc11d8a7928ab0a:

  Merge git://git.denx.de/u-boot-imx (2018-03-09 13:29:58 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 6d7403bf72b5ea46497fe8222d0303cb79563379:

  doc: mxc_hab: Update i.MX HAB documentation (2018-03-11 16:00:21 +0100)

----------------------------------------------------------------
Breno Lima (2):
      doc: mxc_hab: Move HAB related info to the appropriate doc
      doc: mxc_hab: Update i.MX HAB documentation

Bryan O'Donoghue (2):
      imx: hab: Fix usage of packed attribute
      imx: hab: Make usage of packed attribute consistent

Jagan Teki (2):
      ARM: dts: imx6qdl-icore-rqs: Sync usdhc4 node from Linux
      ARM: dts: imx6dl-icore-rqs: Fix to include correct dtsi

 arch/arm/dts/imx6dl-icore-rqs.dts   |  2 +-
 arch/arm/dts/imx6qdl-icore-rqs.dtsi | 37 +++++++++++++++++++++++++++++-
 arch/arm/include/asm/mach-imx/hab.h |  5 ++--
 doc/README.imx6                     | 48
---------------------------------------
 doc/README.mxc_hab                  | 97
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
 5 files changed, 111 insertions(+), 78 deletions(-)


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-03-09 11:11   ` Stefano Babic
@ 2018-03-09 11:31     ` Fabio Estevam
  0 siblings, 0 replies; 307+ messages in thread
From: Fabio Estevam @ 2018-03-09 11:31 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Fri, Mar 9, 2018 at 8:11 AM, Stefano Babic <sbabic@denx.de> wrote:
If you like I can resent a v2 of option 1 where the error message is removed.
>
> It is a hack, but we can do just for the release. I have already applied
> V1, I will drop it from u-boot-imx. I will also apply "imx: syscounter:
> make sure asm is volatile" as you told me today, and then I send a PR
> with these two patches to Tom.

Sounds good! I have sent a v3 patch.

Thanks

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-03-09 10:42 ` Fabio Estevam
@ 2018-03-09 11:11   ` Stefano Babic
  2018-03-09 11:31     ` Fabio Estevam
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-03-09 11:11 UTC (permalink / raw)
  To: u-boot

Hi Fabio,

On 09/03/2018 11:42, Fabio Estevam wrote:
> Hi Stefano,
> 
> On Fri, Mar 9, 2018 at 7:13 AM, Stefano Babic <sbabic@denx.de> wrote:
>> Hi Tom,
>>
>> Fabio fixed a build issue yesterday. It is just a single patch, but it
>> should be flow into the release. You can pick it udirectly p, but I have
>> also applied to u-boot-imx to make things easier.
> 
> Troy made a good observation yesterday: he asked me if after applying
> this patch the error is still shown when BOOT_FROM is not passed in
> the cfg file.
> 
> I tested it and it does not.

Something strange happens...

> 
> So we have some options here that I would like to discuss:
> 
> 1. Drop the error message completely. This message is only helpful for
> developers during bring up phase
> 
> 2. Understand better the problem and fix the parallel build issue
> 
> I think 1 can be done for the upcoming release as the negative effect
> of breaking builds is worse than showing the lack of BOOT_FROM tag.

My concern is more that build is broken, yes. Release is now upcoming,
we can do just a few changes.

> 
> Option number 2 would require more time to implement.
> 
> If you like I can resent a v2 of option 1 where the error message is removed.

It is a hack, but we can do just for the release. I have already applied
V1, I will drop it from u-boot-imx. I will also apply "imx: syscounter:
make sure asm is volatile" as you told me today, and then I send a PR
with these two patches to Tom.

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-03-09 10:13 Stefano Babic
@ 2018-03-09 10:42 ` Fabio Estevam
  2018-03-09 11:11   ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Fabio Estevam @ 2018-03-09 10:42 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Fri, Mar 9, 2018 at 7:13 AM, Stefano Babic <sbabic@denx.de> wrote:
> Hi Tom,
>
> Fabio fixed a build issue yesterday. It is just a single patch, but it
> should be flow into the release. You can pick it udirectly p, but I have
> also applied to u-boot-imx to make things easier.

Troy made a good observation yesterday: he asked me if after applying
this patch the error is still shown when BOOT_FROM is not passed in
the cfg file.

I tested it and it does not.

So we have some options here that I would like to discuss:

1. Drop the error message completely. This message is only helpful for
developers during bring up phase

2. Understand better the problem and fix the parallel build issue

I think 1 can be done for the upcoming release as the negative effect
of breaking builds is worse than showing the lack of BOOT_FROM tag.

Option number 2 would require more time to implement.

If you like I can resent a v2 of option 1 where the error message is removed.

Please let me know your thoughts.

Thanks,

Fabio Estevam

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-03-09 10:13 Stefano Babic
  2018-03-09 10:42 ` Fabio Estevam
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-03-09 10:13 UTC (permalink / raw)
  To: u-boot

Hi Tom,

Fabio fixed a build issue yesterday. It is just a single patch, but it
should be flow into the release. You can pick it udirectly p, but I have
also applied to u-boot-imx to make things easier.


 The following changes since commit
5e62f828256d66e2b28def4f9ef20a2a05c2d04f:

  Prepare v2018.03-rc4 (2018-03-05 20:27:08 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to eca6f053c89bca8ac702e8cf74d187cce2197acb:

  imximage: Check the IVT offset in the correct location (2018-03-08
22:36:01 +0100)

----------------------------------------------------------------
Fabio Estevam (1):
      imximage: Check the IVT offset in the correct location

 tools/imximage.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-02-24 15:58 Stefano Babic
@ 2018-02-26  3:28 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2018-02-26  3:28 UTC (permalink / raw)
  To: u-boot

On Sat, Feb 24, 2018 at 04:58:14PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> some fixes, please pull from u-boot-imx, thanks!
> 
> The following changes since commit 02b0895c215e252cff50d9edf53a972d2bbbfd30:
> 
>   Merge git://git.denx.de/u-boot-sh (2018-02-17 16:06:59 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 3d409153502f25a1ea3b8b4e9940148b7871273d:
> 
>   imx6q: engicam: Use SPL_LOAD_FIT for MMC boards (2018-02-22 14:51:01
> +0100)
> 

For the updated version, applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180225/a0b187a6/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-02-24 15:58 Stefano Babic
  2018-02-26  3:28 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-02-24 15:58 UTC (permalink / raw)
  To: u-boot

Hi Tom,

some fixes, please pull from u-boot-imx, thanks!

The following changes since commit 02b0895c215e252cff50d9edf53a972d2bbbfd30:

  Merge git://git.denx.de/u-boot-sh (2018-02-17 16:06:59 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 3d409153502f25a1ea3b8b4e9940148b7871273d:

  imx6q: engicam: Use SPL_LOAD_FIT for MMC boards (2018-02-22 14:51:01
+0100)

----------------------------------------------------------------
Breno Lima (2):
      imx: hab: Keep CAAM clock enabled after authenticating additional
images
      arm: imx: hab: Define HAB_RVT_BASE according to the processor version

Fabio Estevam (1):
      mx6sabresd: Select the CONFIG_EFI_PARTITION option

Jagan Teki (3):
      imx6ul: engicam: Drop isiot-mmc defconfig
      imx6: engicam: Drop SPL_EXT_SUPPORT
      imx6q: engicam: Use SPL_LOAD_FIT for MMC boards

Maxim Yu. Osipov (1):
      Revert "mx6: ddr: Allow changing REFSEL and REFR fields"

Stefano Babic (1):
      mx6: fix MAINTAINERS for Engicam i.CoreM6 1.5 MIPI

Utkarsh Gupta (3):
      imx: hab: Ensure the IVT DCD pointer is Null prior to calling HAB
authenticate function.
      imx: hab: Check if CSF is valid before authenticating image
      imx: hab: Check if CSF contains deprecated commands

 arch/arm/dts/Makefile                                              |   1 -
 arch/arm/dts/imx6ul-isiot-mmc.dts                                  |
50 ----------------------------------------
 arch/arm/include/asm/mach-imx/hab.h                                |
27 ++++++++++++++++------
 arch/arm/mach-imx/hab.c                                            |
220
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------------------------------------------------------------
 arch/arm/mach-imx/mx6/Kconfig                                      |   1 -
 board/compulab/cm_fx6/spl.c                                        |   2 --
 board/engicam/imx6q/MAINTAINERS                                    |
8 ++++++-
 board/engicam/imx6ul/MAINTAINERS                                   |   1 -
 configs/imx6dl_icore_nand_defconfig                                |
47 ++++++++++++++++++++++++++++++++++++++
 configs/{imx6ul_isiot_mmc_defconfig => imx6q_icore_nand_defconfig} |
23 +++++++++++--------
 configs/imx6qdl_icore_mipi_defconfig                               |   2 +-
 configs/imx6qdl_icore_mmc_defconfig                                |   2 +-
 configs/imx6qdl_icore_rqs_defconfig                                |   2 +-
 configs/imx6ul_geam_mmc_defconfig                                  |   1 -
 configs/imx6ul_isiot_emmc_defconfig                                |
3 ++-
 configs/mx6sabresd_defconfig                                       |   1 +
 16 files changed, 212 insertions(+), 179 deletions(-)
 delete mode 100644 arch/arm/dts/imx6ul-isiot-mmc.dts
 create mode 100644 configs/imx6dl_icore_nand_defconfig
 rename configs/{imx6ul_isiot_mmc_defconfig =>
imx6q_icore_nand_defconfig} (64%)


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-02-05  3:57   ` Tom Rini
@ 2018-02-05  8:34     ` Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2018-02-05  8:34 UTC (permalink / raw)
  To: u-boot

Hi Tom,

On 05/02/2018 04:57, Tom Rini wrote:
> On Sun, Feb 04, 2018 at 07:16:07PM -0500, Tom Rini wrote:
>> On Sun, Feb 04, 2018 at 12:34:29PM +0100, Stefano Babic wrote:
>>
>>> Hi Tom,
>>>
>>> please pull from u-boot-imx, thanks !
>>>
>>>
>>> checkpatch warnings in this PR are just related to long lines (in DTS
>>> and pinmux). These are accepted exceptions. In a couple of cases long
>>> lines are also accepted because code ramains more readable if not split
>>> into more lines).
>>>
>>> The following changes since commit b2153075f42c2d46d310778e226bcb11f0af47f5:
>>>
>>>   Kconfig: usb: rockchip: Remove not needed *_defconfig USB/gadget
>>> entries (2018-02-02 07:13:48 -0500)
>>>
>>> are available in the git repository at:
>>>
>>>   git://www.denx.de/git/u-boot-imx.git master
>>>
>>> for you to fetch changes up to d1ceb0c4881332cb0586920f0a40f8e4a48d99a9:
>>>
>>>   imx: mx7: run sec_init for CAAM RNG (2018-02-04 12:14:11 +0100)
>>>
>>
>> Applied to u-boot/master, thanks!
> 
> That said, oops!
> WARNING: no status info for 'imx6qdl_icore_mipi'
> WARNING: no maintainers for 'imx6qdl_icore_mipi'
> 
> Please fix, thanks!
> 

Yes, thanks, I have sent a patch.

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-02-05  0:16 ` Tom Rini
@ 2018-02-05  3:57   ` Tom Rini
  2018-02-05  8:34     ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2018-02-05  3:57 UTC (permalink / raw)
  To: u-boot

On Sun, Feb 04, 2018 at 07:16:07PM -0500, Tom Rini wrote:
> On Sun, Feb 04, 2018 at 12:34:29PM +0100, Stefano Babic wrote:
> 
> > Hi Tom,
> > 
> > please pull from u-boot-imx, thanks !
> > 
> > 
> > checkpatch warnings in this PR are just related to long lines (in DTS
> > and pinmux). These are accepted exceptions. In a couple of cases long
> > lines are also accepted because code ramains more readable if not split
> > into more lines).
> > 
> > The following changes since commit b2153075f42c2d46d310778e226bcb11f0af47f5:
> > 
> >   Kconfig: usb: rockchip: Remove not needed *_defconfig USB/gadget
> > entries (2018-02-02 07:13:48 -0500)
> > 
> > are available in the git repository at:
> > 
> >   git://www.denx.de/git/u-boot-imx.git master
> > 
> > for you to fetch changes up to d1ceb0c4881332cb0586920f0a40f8e4a48d99a9:
> > 
> >   imx: mx7: run sec_init for CAAM RNG (2018-02-04 12:14:11 +0100)
> > 
> 
> Applied to u-boot/master, thanks!

That said, oops!
WARNING: no status info for 'imx6qdl_icore_mipi'
WARNING: no maintainers for 'imx6qdl_icore_mipi'

Please fix, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180204/3c072bd0/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-02-04 11:34 Stefano Babic
@ 2018-02-05  0:16 ` Tom Rini
  2018-02-05  3:57   ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2018-02-05  0:16 UTC (permalink / raw)
  To: u-boot

On Sun, Feb 04, 2018 at 12:34:29PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> 
> checkpatch warnings in this PR are just related to long lines (in DTS
> and pinmux). These are accepted exceptions. In a couple of cases long
> lines are also accepted because code ramains more readable if not split
> into more lines).
> 
> The following changes since commit b2153075f42c2d46d310778e226bcb11f0af47f5:
> 
>   Kconfig: usb: rockchip: Remove not needed *_defconfig USB/gadget
> entries (2018-02-02 07:13:48 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to d1ceb0c4881332cb0586920f0a40f8e4a48d99a9:
> 
>   imx: mx7: run sec_init for CAAM RNG (2018-02-04 12:14:11 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180204/e2ac8d03/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-02-04 11:34 Stefano Babic
  2018-02-05  0:16 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-02-04 11:34 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !


checkpatch warnings in this PR are just related to long lines (in DTS
and pinmux). These are accepted exceptions. In a couple of cases long
lines are also accepted because code ramains more readable if not split
into more lines).

The following changes since commit b2153075f42c2d46d310778e226bcb11f0af47f5:

  Kconfig: usb: rockchip: Remove not needed *_defconfig USB/gadget
entries (2018-02-02 07:13:48 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to d1ceb0c4881332cb0586920f0a40f8e4a48d99a9:

  imx: mx7: run sec_init for CAAM RNG (2018-02-04 12:14:11 +0100)

----------------------------------------------------------------
Anson Huang (3):
      mx7_common: use psci 1.0 instead of 0.1
      imx: mx7: psci: add system reset support
      imx: mx7: psci: add system power off support

Bryan O'Donoghue (2):
      drivers/crypto/fsl: assign job-rings to non-TrustZone
      imx: mx7: run sec_init for CAAM RNG

Eran Matityahu (2):
      iomux-v3: Take mx6dqp in consideration for imx_iomux_v3_setup_pad()
      i2c: imx: Take mx6dqp in consideration in the I2C_PADS_INFO macro

Eric Nelson (3):
      mx6memcal: launder through savedefconfig
      mx6memcal: enable SDP support
      mx6memcal: fix comment in board header file

Fabio Estevam (4):
      mx6sabre_common: Allow building CONFIG_USB_FUNCTION_MASS_STORAGE
      mx6sabresd: Select CONFIG_CMD_USB_MASS_STORAGE
      mx6sabresd: Add fastboot support
      doc: mxc_hab: Improve the config option list

Hannu Lounento (5):
      net: e1000: add support for writing to EEPROM
      net: e1000: split e1000_read_mac_addr
      net: e1000: implement eth_write_hwaddr
      board: ge: bx50v3: program MAC address to I210
      board: ge: bx50v3: mount rootfs read-only

Ian Ray (5):
      configs: Add network device support for bx50v3 products
      board: ge: bx50v3: Support FIT and select configuration based on VPD
      config: ge_bx50v3: read boot script
      configs: ge_bx50v3: enable bootcount
      configs: ge_bx50v3: automatic partition selection and video output
failure message

Jagan Teki (3):
      board: i.MX6QDL: add Engicam i.CoreM6 1.5 QDL MIPI starter kit
      configs: enable spl support wrt env device
      configs: icore: enable nand on mmc defconfig

Martyn Welch (3):
      board: ge: Enable access to i2c bus 1 and 2
      board: ge: bx50v3: move FEC MAC address programming to driver
      board: ge: bx50v3: Enable hardware watchdog

Michael Trimarchi (1):
      imx: mx25: Remove SION bit in all pin-mux that are safe

Nandor Han (2):
      rtc: adding RX8010SJ rtc driver
      board,ge,bx50v3 - rtc time validation

Patrick Bruenn (4):
      arm: imx: cx9020: remove usage of mx53_dram_size
      arm: imx: cx9020: move dram init into common place
      arm: imx: m53evk: remove usage of mx53_dram_size
      arm: imx: mx53loco: remove usage of mx53_dram_size

Peng Fan (32):
      imx: add i.MX8M into Kconfig
      imx: mx8m: add register definition header file
      imx: mx8m: add pin header file
      imx: mx8m: add clock driver
      imx: add sip function
      imx: boot_mode: add USB_BOOT entry
      imx: cpu: update cpu file to support i.MX8M
      imx: spl: implement spl_boot_device for i.MX8M
      imx: add i.MX8MQ SoC Revision and is_mx8m helper
      imx: add pad settings bit definition for i.MX8M
      imx: cpu: move speed/temp to common cpu
      imx: cpu: add cpu speed/grade for i.MX8M
      imx: refactor imx_get_mac_from_fuse
      imx: cleanup bootaux
      imx: bootaux: support i.MX8M
      imx: mx7: move get_boot_device to cpu.c
      imx: cpu: support get_boot_device for i.MX8M
      imx: mx7: move mmc env code to mmc_env.c
      imx: mx8m: add soc related settings and files
      imx: makefile: compile files for i.MX8M
      misc: ocotp: add i.MX8M support
      mmc: fsl_esdhc: support i.MX8M
      imx: lcdif: include i.MX8M
      gpio: mxc: add i.MX8M support
      net: fec: do not access reserved register for i.MX8M
      imx: imx8mq: add dtsi file
      power: pmic/regulator allow dm be omitted by SPL
      imx: mx8m: add ddr controller memory map
      mmc: fsl_esdhc: add strobe and tuning entry
      ARM: dts: add pinmux and tuning settings for HS200/SDR104
      mmc: fsl_esdhc: support SDR104 and HS200
      imx: mx7dsabresd: enable UHS and HS200

Soeren Moch (1):
      board: tbs2910: add private imx config

Stefan Agner (1):
      arm: dts: imx6ull: move input include to base device tree

Ye Li (1):
      net: fec: fix build warnings for 64bits support

 arch/arm/Kconfig                            |  14 +-
 arch/arm/Makefile                           |   4 +-
 arch/arm/dts/Makefile                       |   2 +
 arch/arm/dts/fsl-imx8-ca53.dtsi             |  92 ++++++++++
 arch/arm/dts/fsl-imx8mq.dtsi                | 429
+++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6dl-icore-mipi.dts          |  21 +++
 arch/arm/dts/imx6q-icore-mipi.dts           |  21 +++
 arch/arm/dts/imx6qdl-icore.dtsi             |  28 ++++
 arch/arm/dts/imx6ull-14x14-evk.dts          |   1 -
 arch/arm/dts/imx6ull.dtsi                   |   1 +
 arch/arm/dts/imx7d-sdb.dts                  |  88 ++++++++++
 arch/arm/include/asm/arch-imx/cpu.h         |   6 +-
 arch/arm/include/asm/arch-mx25/iomux-mx25.h | 571
+++++++++++++++++++++++++++++++-------------------------------
 arch/arm/include/asm/arch-mx6/imx-regs.h    |   9 +-
 arch/arm/include/asm/arch-mx7/imx-regs.h    |  18 +-
 arch/arm/include/asm/arch-mx8m/clock.h      | 657
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx8m/crm_regs.h   |  10 ++
 arch/arm/include/asm/arch-mx8m/ddr.h        | 356
+++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx8m/gpio.h       |  12 ++
 arch/arm/include/asm/arch-mx8m/imx-regs.h   | 468
+++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx8m/mx8mq_pins.h | 623
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx8m/sys_proto.h  |  18 ++
 arch/arm/include/asm/mach-imx/boot_mode.h   |  10 ++
 arch/arm/include/asm/mach-imx/iomux-v3.h    |  24 ++-
 arch/arm/include/asm/mach-imx/mxc_i2c.h     |   3 +-
 arch/arm/include/asm/mach-imx/regs-lcdif.h  |  10 +-
 arch/arm/include/asm/mach-imx/sys_proto.h   |   4 +
 arch/arm/mach-imx/Makefile                  |  21 ++-
 arch/arm/mach-imx/cpu.c                     | 130 ++++++++++++++-
 arch/arm/mach-imx/imx_bootaux.c             |  46 ++++-
 arch/arm/mach-imx/mac.c                     |  61 +++++++
 arch/arm/mach-imx/mmc_env.c                 |  30 ++++
 arch/arm/mach-imx/mx5/Makefile              |   5 +
 arch/arm/mach-imx/mx5/mx53_dram.c           |  45 +++++
 arch/arm/mach-imx/mx6/soc.c                 |  72 --------
 arch/arm/mach-imx/mx7/psci-mx7.c            |  33 +++-
 arch/arm/mach-imx/mx7/psci.S                |  14 ++
 arch/arm/mach-imx/mx7/soc.c                 | 200 +---------------------
 arch/arm/mach-imx/mx8m/Kconfig              |  10 ++
 arch/arm/mach-imx/mx8m/Makefile             |   8 +
 arch/arm/mach-imx/mx8m/clock.c              | 795
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/mx8m/clock_slice.c        | 742
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/mx8m/lowlevel_init.S      |  63 +++++++
 arch/arm/mach-imx/mx8m/soc.c                | 227 +++++++++++++++++++++++++
 arch/arm/mach-imx/sip.c                     |  23 +++
 arch/arm/mach-imx/spl.c                     |   8 +-
 board/aries/m53evk/m53evk.c                 |  39 -----
 board/beckhoff/mx53cx9020/mx53cx9020.c      |  39 -----
 board/engicam/common/board.c                |   9 +-
 board/freescale/mx53loco/mx53loco.c         |  39 -----
 board/freescale/mx6memcal/spl.c             |   1 -
 board/ge/bx50v3/bx50v3.c                    | 130 ++++++++++-----
 board/tbs/tbs2910/Kconfig                   |   2 +-
 board/tbs/tbs2910/tbs2910.cfg               | 115 +++++++++++++
 configs/ge_b450v3_defconfig                 |   7 +-
 configs/ge_b650v3_defconfig                 |   7 +-
 configs/ge_b850v3_defconfig                 |   8 +-
 configs/imx6qdl_icore_mipi_defconfig        |  49 ++++++
 configs/imx6qdl_icore_mmc_defconfig         |   5 +
 configs/mx6memcal_defconfig                 |  19 ++-
 configs/mx6sabresd_defconfig                |   7 +
 configs/mx7dsabresd_defconfig               |   3 +
 configs/mx7dsabresd_secure_defconfig        |   3 +
 doc/README.mxc_hab                          |   9 +-

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-01-16  0:00 ` Tom Rini
@ 2018-01-16  9:40   ` Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2018-01-16  9:40 UTC (permalink / raw)
  To: u-boot

Hi Tom,

On 16/01/2018 01:00, Tom Rini wrote:
> On Mon, Jan 15, 2018 at 06:52:01PM +0100, Stefano Babic wrote:
> 
>> Hi Tom,
>>
>> please pull from u-boot-imx, thanks !
>>
>> The following changes since commit 373b9003410b44a1133060c2e63483b278fb476b:
>>
>>   Merge git://git.denx.de/u-boot-sunxi (2018-01-11 14:14:19 -0500)
>>
>> are available in the git repository at:
>>
>>   git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to 9587b0d61133c025d48ebf480aa021fc2fdd53a7:
>>
>>   arm: imx: hab: Add hab_failsafe console command (2018-01-14 17:26:30
>> +0100)
>>
> 
> Applied to u-boot/master, thanks!
> 
> But please note that checkpatch has a lot to say, some of which should
> probably be addressed:
>

Ouch.....

I will check it :-)

Regards,
Stefano

> WARNING: please write a paragraph that describes the config symbol fully
> #51: FILE: arch/arm/mach-imx/mx6/Kconfig:380:
> +config TARGET_SKSIMX6
> 
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #67: 
> new file mode 100644
> 
> WARNING: line over 80 characters
> #171: FILE: board/sks-kinkel/sksimx6/sksimx6.c:62:
> +	IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)),/* CD */
> 
> CHECK: Blank lines aren't necessary after an open brace '{'
> #215: FILE: board/sks-kinkel/sksimx6/sksimx6.c:106:
> +{
> +
> 
> CHECK: Blank lines aren't necessary before a close brace '}'
> #245: FILE: board/sks-kinkel/sksimx6/sksimx6.c:136:
> +
> +}
> 
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #249: FILE: board/sks-kinkel/sksimx6/sksimx6.c:140:
> +	uint32_t base = IMX_FEC_BASE;
> 
> CHECK: Alignment should match open parenthesis
> #261: FILE: board/sks-kinkel/sksimx6/sksimx6.c:152:
> +	phydev = phy_find_by_mask(bus, (0xf << CONFIG_FEC_MXC_PHYADDR),
> +					PHY_INTERFACE_MODE_RGMII);
> 
> WARNING: unnecessary whitespace before a quoted newline
> #333: FILE: board/sks-kinkel/sksimx6/sksimx6.c:224:
> +		printf("Warning: failed to initialize mmc dev \n");
> 
> CHECK: Please don't use multiple blank lines
> #350: FILE: board/sks-kinkel/sksimx6/sksimx6.c:241:
> +
> +
> 
> WARNING: line over 80 characters
> #471: FILE: board/sks-kinkel/sksimx6/sksimx6.c:362:
> +		mx6_dram_cfg(&mem_qdl, &mx6dl_1g_mmdc_calib, &mt41k128m16jt_125);
> 
> CHECK: Please don't use multiple blank lines
> #601: FILE: include/configs/sksimx6.h:7:
> +
> +
> 
> WARNING: please, no space before tabs
> #670: FILE: include/configs/sksimx6.h:76:
> +^I"addmisc=setenv bootargs ${bootargs} ${miscargs}\0" ^I^I\$
> 
> WARNING: please, no space before tabs
> #675: FILE: include/configs/sksimx6.h:81:
> +^I"fdt_addr_r=0x18000000\0" ^I^I^I^I^I\$
> 
> WARNING: please, no space before tabs
> #677: FILE: include/configs/sksimx6.h:83:
> +^I"fdt_high=0xffffffff\0" ^I^I^I^I^I\$
> 
> WARNING: please, no space before tabs
> #678: FILE: include/configs/sksimx6.h:84:
> +^I"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" ^I^I\$
> 
> WARNING: please, no space before tabs
> #681: FILE: include/configs/sksimx6.h:87:
> +^I"mmcboot=if run mmcload;then " ^I^I^I^I^I\$
> 
> WARNING: please, no space before tabs
> #683: FILE: include/configs/sksimx6.h:89:
> +^I^I^I"bootm;fi\0" ^I^I^I^I^I\$
> 
> total: 0 errors, 11 warnings, 6 checks, 611 lines checked
> WARNING: line over 80 characters
> #38: FILE: drivers/misc/mxc_ocotp.c:356:
> +			printf("mxc_ocotp: The word has been programmed, no more write\n");
> 
> total: 0 errors, 1 warnings, 0 checks, 23 lines checked
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #34: 
> new file mode 100644
> 
> WARNING: line over 80 characters
> #549: FILE: arch/arm/dts/imx6sx-sdb.dtsi:367:
> +				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
> 
> WARNING: line over 80 characters
> #555: FILE: arch/arm/dts/imx6sx-sdb.dtsi:373:
> +				MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000
> 
> WARNING: line over 80 characters
> #585: FILE: arch/arm/dts/imx6sx-sdb.dtsi:403:
> +				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
> 
> WARNING: line over 80 characters
> #586: FILE: arch/arm/dts/imx6sx-sdb.dtsi:404:
> +				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
> 
> WARNING: line over 80 characters
> #592: FILE: arch/arm/dts/imx6sx-sdb.dtsi:410:
> +				MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
> 
> WARNING: line over 80 characters
> #593: FILE: arch/arm/dts/imx6sx-sdb.dtsi:411:
> +				MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
> 
> WARNING: line over 80 characters
> #599: FILE: arch/arm/dts/imx6sx-sdb.dtsi:417:
> +				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
> 
> WARNING: line over 80 characters
> #600: FILE: arch/arm/dts/imx6sx-sdb.dtsi:418:
> +				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
> 
> WARNING: line over 80 characters
> #640: FILE: arch/arm/dts/imx6sx-sdb.dtsi:458:
> +				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
> 
> WARNING: line over 80 characters
> #740: FILE: arch/arm/dts/imx6sx-sdb.dtsi:558:
> +				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
> 
> WARNING: line over 80 characters
> #741: FILE: arch/arm/dts/imx6sx-sdb.dtsi:559:
> +				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
> 
> WARNING: line over 80 characters
> #783: FILE: arch/arm/dts/imx6sx-sdb.dtsi:601:
> +				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
> 
> WARNING: line over 80 characters
> #784: FILE: arch/arm/dts/imx6sx-sdb.dtsi:602:
> +				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
> 
> total: 0 errors, 14 warnings, 0 checks, 757 lines checked
> WARNING: 'framwork' may be misspelled - perhaps 'framework'?
> #7: 
> framwork now and wdog reset will be triggered once set WDOG_B mux
> 
> WARNING: 'framwork' may be misspelled - perhaps 'framework'?
> #49: FILE: board/freescale/mx6sxsabresd/mx6sxsabresd.c:306:
> +	 * framwork now and wdog reset will be triggered once set WDOG_B mux
> 
> total: 0 errors, 2 warnings, 0 checks, 33 lines checked
> WARNING: line over 80 characters
> #95: FILE: arch/arm/mach-imx/mx5/clock.c:918:
> +static int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> 
> total: 0 errors, 1 warnings, 0 checks, 85 lines checked
> CHECK: Alignment should match open parenthesis
> #60: FILE: board/toradex/apalis_imx6/pf0100.c:214:
> +static int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc,
>  		char * const argv[])
> 
> CHECK: Alignment should match open parenthesis
> #109: FILE: board/toradex/colibri_imx6/pf0100.c:196:
> +static int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc,
>  		char * const argv[])
> 
> total: 0 errors, 0 warnings, 2 checks, 79 lines checked
> WARNING: line over 80 characters
> #56: FILE: include/configs/cm_fx6.h:158:
> +		"if test $board_name = Utilite && test $board_rev = MX6Q ; then " \
> 
> total: 0 errors, 1 warnings, 0 checks, 26 lines checked
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #45: FILE: arch/arm/include/asm/mach-imx/hab.h:148:
> +int authenticate_image(uint32_t ddr_start, uint32_t image_size);
> 
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #57: FILE: arch/arm/mach-imx/hab.c:413:
> +int authenticate_image(uint32_t ddr_start, uint32_t image_size)
> 
> total: 0 errors, 0 warnings, 2 checks, 15 lines checked
> WARNING: Prefer using '"%s...", __func__' to using 'authenticate_image', this function's name, in a string
> #95: FILE: arch/arm/mach-imx/hab.c:465:
> +		puts("\nCalling authenticate_image in ROM\n");
> 
> total: 0 errors, 1 warnings, 0 checks, 160 lines checked
> WARNING: Prefer using '"%s...", __func__' to using 'authenticate_image', this function's name, in a string
> #85: FILE: arch/arm/mach-imx/hab.c:469:
> +	puts("\nCalling authenticate_image in ROM\n");
> 
> total: 0 errors, 1 warnings, 0 checks, 135 lines checked
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #67: FILE: arch/arm/include/asm/mach-imx/hab.h:151:
> +int authenticate_image(uint32_t ddr_start, uint32_t image_size,
> 
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #159: FILE: arch/arm/mach-imx/hab.c:386:
> +int authenticate_image(uint32_t ddr_start, uint32_t image_size,
> 
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #165: FILE: arch/arm/mach-imx/hab.c:391:
> +	uint32_t ivt_addr = 0;
> 
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #252: FILE: arch/arm/mach-imx/spl.c:192:
> +	uint32_t offset;
> 
> total: 0 errors, 0 warnings, 4 checks, 188 lines checked
> CHECK: Prefer kernel type 'u8' over 'uint8_t'
> #49: FILE: arch/arm/include/asm/mach-imx/hab.h:25:
> +	uint8_t		magic;
> 
> CHECK: Prefer kernel type 'u16' over 'uint16_t'
> #50: FILE: arch/arm/include/asm/mach-imx/hab.h:26:
> +	uint16_t	length;
> 
> CHECK: Prefer kernel type 'u8' over 'uint8_t'
> #51: FILE: arch/arm/include/asm/mach-imx/hab.h:27:
> +	uint8_t		version;
> 
> WARNING: __packed is preferred over __attribute__((packed))
> #52: FILE: arch/arm/include/asm/mach-imx/hab.h:28:
> +} __attribute__((packed));
> 
> WARNING: Adding new packed members is to be done with care
> #52: FILE: arch/arm/include/asm/mach-imx/hab.h:28:
> +} __attribute__((packed));
> 
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #56: FILE: arch/arm/include/asm/mach-imx/hab.h:32:
> +	uint32_t entry;		/* Absolute address of first instruction */
> 
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #57: FILE: arch/arm/include/asm/mach-imx/hab.h:33:
> +	uint32_t reserved1;	/* Reserved should be zero */
> 
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #58: FILE: arch/arm/include/asm/mach-imx/hab.h:34:
> +	uint32_t dcd;		/* Absolute address of the image DCD */
> 
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #59: FILE: arch/arm/include/asm/mach-imx/hab.h:35:
> +	uint32_t boot;		/* Absolute address of the boot data */
> 
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #60: FILE: arch/arm/include/asm/mach-imx/hab.h:36:
> +	uint32_t self;		/* Absolute address of the IVT */
> 
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #61: FILE: arch/arm/include/asm/mach-imx/hab.h:37:
> +	uint32_t csf;		/* Absolute address of the CSF */
> 
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #62: FILE: arch/arm/include/asm/mach-imx/hab.h:38:
> +	uint32_t reserved2;	/* Reserved should be zero */
> 
> total: 0 errors, 2 warnings, 10 checks, 34 lines checked
> CHECK: Prefer kernel type 'u8' over 'uint8_t'
> #172: FILE: arch/arm/mach-imx/hab.c:212:
> +static uint8_t hab_statuses[5] = {
> 
> CHECK: Prefer kernel type 'u8' over 'uint8_t'
> #181: FILE: arch/arm/mach-imx/hab.c:220:
> +static uint8_t hab_reasons[26] = {
> 
> CHECK: Prefer kernel type 'u8' over 'uint8_t'
> #190: FILE: arch/arm/mach-imx/hab.c:249:
> +static uint8_t hab_contexts[12] = {
> 
> CHECK: Prefer kernel type 'u8' over 'uint8_t'
> #199: FILE: arch/arm/mach-imx/hab.c:264:
> +static uint8_t hab_engines[16] = {
> 
> CHECK: Prefer kernel type 'u8' over 'uint8_t'
> #208: FILE: arch/arm/mach-imx/hab.c:295:
> +static void process_event_record(uint8_t *event_data, size_t bytes)
> 
> CHECK: Prefer kernel type 'u8' over 'uint8_t'
> #217: FILE: arch/arm/mach-imx/hab.c:305:
> +static void display_event(uint8_t *event_data, size_t bytes)
> 
> total: 0 errors, 0 warnings, 6 checks, 213 lines checked
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #38: FILE: arch/arm/include/asm/mach-imx/hab.h:188:
> +int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size,
> 
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> #61: FILE: arch/arm/mach-imx/hab.c:438:
> +int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size,
> 
> total: 0 errors, 0 warnings, 2 checks, 38 lines checked
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-01-15 17:52 Stefano Babic
@ 2018-01-16  0:00 ` Tom Rini
  2018-01-16  9:40   ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2018-01-16  0:00 UTC (permalink / raw)
  To: u-boot

On Mon, Jan 15, 2018 at 06:52:01PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 373b9003410b44a1133060c2e63483b278fb476b:
> 
>   Merge git://git.denx.de/u-boot-sunxi (2018-01-11 14:14:19 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 9587b0d61133c025d48ebf480aa021fc2fdd53a7:
> 
>   arm: imx: hab: Add hab_failsafe console command (2018-01-14 17:26:30
> +0100)
> 

Applied to u-boot/master, thanks!

But please note that checkpatch has a lot to say, some of which should
probably be addressed:

WARNING: please write a paragraph that describes the config symbol fully
#51: FILE: arch/arm/mach-imx/mx6/Kconfig:380:
+config TARGET_SKSIMX6

WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#67: 
new file mode 100644

WARNING: line over 80 characters
#171: FILE: board/sks-kinkel/sksimx6/sksimx6.c:62:
+	IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)),/* CD */

CHECK: Blank lines aren't necessary after an open brace '{'
#215: FILE: board/sks-kinkel/sksimx6/sksimx6.c:106:
+{
+

CHECK: Blank lines aren't necessary before a close brace '}'
#245: FILE: board/sks-kinkel/sksimx6/sksimx6.c:136:
+
+}

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#249: FILE: board/sks-kinkel/sksimx6/sksimx6.c:140:
+	uint32_t base = IMX_FEC_BASE;

CHECK: Alignment should match open parenthesis
#261: FILE: board/sks-kinkel/sksimx6/sksimx6.c:152:
+	phydev = phy_find_by_mask(bus, (0xf << CONFIG_FEC_MXC_PHYADDR),
+					PHY_INTERFACE_MODE_RGMII);

WARNING: unnecessary whitespace before a quoted newline
#333: FILE: board/sks-kinkel/sksimx6/sksimx6.c:224:
+		printf("Warning: failed to initialize mmc dev \n");

CHECK: Please don't use multiple blank lines
#350: FILE: board/sks-kinkel/sksimx6/sksimx6.c:241:
+
+

WARNING: line over 80 characters
#471: FILE: board/sks-kinkel/sksimx6/sksimx6.c:362:
+		mx6_dram_cfg(&mem_qdl, &mx6dl_1g_mmdc_calib, &mt41k128m16jt_125);

CHECK: Please don't use multiple blank lines
#601: FILE: include/configs/sksimx6.h:7:
+
+

WARNING: please, no space before tabs
#670: FILE: include/configs/sksimx6.h:76:
+^I"addmisc=setenv bootargs ${bootargs} ${miscargs}\0" ^I^I\$

WARNING: please, no space before tabs
#675: FILE: include/configs/sksimx6.h:81:
+^I"fdt_addr_r=0x18000000\0" ^I^I^I^I^I\$

WARNING: please, no space before tabs
#677: FILE: include/configs/sksimx6.h:83:
+^I"fdt_high=0xffffffff\0" ^I^I^I^I^I\$

WARNING: please, no space before tabs
#678: FILE: include/configs/sksimx6.h:84:
+^I"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" ^I^I\$

WARNING: please, no space before tabs
#681: FILE: include/configs/sksimx6.h:87:
+^I"mmcboot=if run mmcload;then " ^I^I^I^I^I\$

WARNING: please, no space before tabs
#683: FILE: include/configs/sksimx6.h:89:
+^I^I^I"bootm;fi\0" ^I^I^I^I^I\$

total: 0 errors, 11 warnings, 6 checks, 611 lines checked
WARNING: line over 80 characters
#38: FILE: drivers/misc/mxc_ocotp.c:356:
+			printf("mxc_ocotp: The word has been programmed, no more write\n");

total: 0 errors, 1 warnings, 0 checks, 23 lines checked
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#34: 
new file mode 100644

WARNING: line over 80 characters
#549: FILE: arch/arm/dts/imx6sx-sdb.dtsi:367:
+				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91

WARNING: line over 80 characters
#555: FILE: arch/arm/dts/imx6sx-sdb.dtsi:373:
+				MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000

WARNING: line over 80 characters
#585: FILE: arch/arm/dts/imx6sx-sdb.dtsi:403:
+				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1

WARNING: line over 80 characters
#586: FILE: arch/arm/dts/imx6sx-sdb.dtsi:404:
+				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1

WARNING: line over 80 characters
#592: FILE: arch/arm/dts/imx6sx-sdb.dtsi:410:
+				MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1

WARNING: line over 80 characters
#593: FILE: arch/arm/dts/imx6sx-sdb.dtsi:411:
+				MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1

WARNING: line over 80 characters
#599: FILE: arch/arm/dts/imx6sx-sdb.dtsi:417:
+				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1

WARNING: line over 80 characters
#600: FILE: arch/arm/dts/imx6sx-sdb.dtsi:418:
+				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1

WARNING: line over 80 characters
#640: FILE: arch/arm/dts/imx6sx-sdb.dtsi:458:
+				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000

WARNING: line over 80 characters
#740: FILE: arch/arm/dts/imx6sx-sdb.dtsi:558:
+				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */

WARNING: line over 80 characters
#741: FILE: arch/arm/dts/imx6sx-sdb.dtsi:559:
+				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */

WARNING: line over 80 characters
#783: FILE: arch/arm/dts/imx6sx-sdb.dtsi:601:
+				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */

WARNING: line over 80 characters
#784: FILE: arch/arm/dts/imx6sx-sdb.dtsi:602:
+				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */

total: 0 errors, 14 warnings, 0 checks, 757 lines checked
WARNING: 'framwork' may be misspelled - perhaps 'framework'?
#7: 
framwork now and wdog reset will be triggered once set WDOG_B mux

WARNING: 'framwork' may be misspelled - perhaps 'framework'?
#49: FILE: board/freescale/mx6sxsabresd/mx6sxsabresd.c:306:
+	 * framwork now and wdog reset will be triggered once set WDOG_B mux

total: 0 errors, 2 warnings, 0 checks, 33 lines checked
WARNING: line over 80 characters
#95: FILE: arch/arm/mach-imx/mx5/clock.c:918:
+static int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])

total: 0 errors, 1 warnings, 0 checks, 85 lines checked
CHECK: Alignment should match open parenthesis
#60: FILE: board/toradex/apalis_imx6/pf0100.c:214:
+static int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc,
 		char * const argv[])

CHECK: Alignment should match open parenthesis
#109: FILE: board/toradex/colibri_imx6/pf0100.c:196:
+static int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc,
 		char * const argv[])

total: 0 errors, 0 warnings, 2 checks, 79 lines checked
WARNING: line over 80 characters
#56: FILE: include/configs/cm_fx6.h:158:
+		"if test $board_name = Utilite && test $board_rev = MX6Q ; then " \

total: 0 errors, 1 warnings, 0 checks, 26 lines checked
CHECK: Prefer kernel type 'u32' over 'uint32_t'
#45: FILE: arch/arm/include/asm/mach-imx/hab.h:148:
+int authenticate_image(uint32_t ddr_start, uint32_t image_size);

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#57: FILE: arch/arm/mach-imx/hab.c:413:
+int authenticate_image(uint32_t ddr_start, uint32_t image_size)

total: 0 errors, 0 warnings, 2 checks, 15 lines checked
WARNING: Prefer using '"%s...", __func__' to using 'authenticate_image', this function's name, in a string
#95: FILE: arch/arm/mach-imx/hab.c:465:
+		puts("\nCalling authenticate_image in ROM\n");

total: 0 errors, 1 warnings, 0 checks, 160 lines checked
WARNING: Prefer using '"%s...", __func__' to using 'authenticate_image', this function's name, in a string
#85: FILE: arch/arm/mach-imx/hab.c:469:
+	puts("\nCalling authenticate_image in ROM\n");

total: 0 errors, 1 warnings, 0 checks, 135 lines checked
CHECK: Prefer kernel type 'u32' over 'uint32_t'
#67: FILE: arch/arm/include/asm/mach-imx/hab.h:151:
+int authenticate_image(uint32_t ddr_start, uint32_t image_size,

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#159: FILE: arch/arm/mach-imx/hab.c:386:
+int authenticate_image(uint32_t ddr_start, uint32_t image_size,

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#165: FILE: arch/arm/mach-imx/hab.c:391:
+	uint32_t ivt_addr = 0;

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#252: FILE: arch/arm/mach-imx/spl.c:192:
+	uint32_t offset;

total: 0 errors, 0 warnings, 4 checks, 188 lines checked
CHECK: Prefer kernel type 'u8' over 'uint8_t'
#49: FILE: arch/arm/include/asm/mach-imx/hab.h:25:
+	uint8_t		magic;

CHECK: Prefer kernel type 'u16' over 'uint16_t'
#50: FILE: arch/arm/include/asm/mach-imx/hab.h:26:
+	uint16_t	length;

CHECK: Prefer kernel type 'u8' over 'uint8_t'
#51: FILE: arch/arm/include/asm/mach-imx/hab.h:27:
+	uint8_t		version;

WARNING: __packed is preferred over __attribute__((packed))
#52: FILE: arch/arm/include/asm/mach-imx/hab.h:28:
+} __attribute__((packed));

WARNING: Adding new packed members is to be done with care
#52: FILE: arch/arm/include/asm/mach-imx/hab.h:28:
+} __attribute__((packed));

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#56: FILE: arch/arm/include/asm/mach-imx/hab.h:32:
+	uint32_t entry;		/* Absolute address of first instruction */

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#57: FILE: arch/arm/include/asm/mach-imx/hab.h:33:
+	uint32_t reserved1;	/* Reserved should be zero */

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#58: FILE: arch/arm/include/asm/mach-imx/hab.h:34:
+	uint32_t dcd;		/* Absolute address of the image DCD */

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#59: FILE: arch/arm/include/asm/mach-imx/hab.h:35:
+	uint32_t boot;		/* Absolute address of the boot data */

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#60: FILE: arch/arm/include/asm/mach-imx/hab.h:36:
+	uint32_t self;		/* Absolute address of the IVT */

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#61: FILE: arch/arm/include/asm/mach-imx/hab.h:37:
+	uint32_t csf;		/* Absolute address of the CSF */

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#62: FILE: arch/arm/include/asm/mach-imx/hab.h:38:
+	uint32_t reserved2;	/* Reserved should be zero */

total: 0 errors, 2 warnings, 10 checks, 34 lines checked
CHECK: Prefer kernel type 'u8' over 'uint8_t'
#172: FILE: arch/arm/mach-imx/hab.c:212:
+static uint8_t hab_statuses[5] = {

CHECK: Prefer kernel type 'u8' over 'uint8_t'
#181: FILE: arch/arm/mach-imx/hab.c:220:
+static uint8_t hab_reasons[26] = {

CHECK: Prefer kernel type 'u8' over 'uint8_t'
#190: FILE: arch/arm/mach-imx/hab.c:249:
+static uint8_t hab_contexts[12] = {

CHECK: Prefer kernel type 'u8' over 'uint8_t'
#199: FILE: arch/arm/mach-imx/hab.c:264:
+static uint8_t hab_engines[16] = {

CHECK: Prefer kernel type 'u8' over 'uint8_t'
#208: FILE: arch/arm/mach-imx/hab.c:295:
+static void process_event_record(uint8_t *event_data, size_t bytes)

CHECK: Prefer kernel type 'u8' over 'uint8_t'
#217: FILE: arch/arm/mach-imx/hab.c:305:
+static void display_event(uint8_t *event_data, size_t bytes)

total: 0 errors, 0 warnings, 6 checks, 213 lines checked
CHECK: Prefer kernel type 'u32' over 'uint32_t'
#38: FILE: arch/arm/include/asm/mach-imx/hab.h:188:
+int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size,

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#61: FILE: arch/arm/mach-imx/hab.c:438:
+int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size,

total: 0 errors, 0 warnings, 2 checks, 38 lines checked
-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180115/14e9c2ed/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-01-15 17:52 Stefano Babic
  2018-01-16  0:00 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-01-15 17:52 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 373b9003410b44a1133060c2e63483b278fb476b:

  Merge git://git.denx.de/u-boot-sunxi (2018-01-11 14:14:19 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 9587b0d61133c025d48ebf480aa021fc2fdd53a7:

  arm: imx: hab: Add hab_failsafe console command (2018-01-14 17:26:30
+0100)

----------------------------------------------------------------
Bryan O'Donoghue (25):
      arm: imx: hab: Make authenticate_image return int
      arm: imx: hab: Fix authenticate_image result code
      arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail
      arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail
      arm: imx: hab: Move IVT_SIZE to hab.h
      arm: imx: hab: Move CSF_PAD_SIZE to hab.h
      arm: imx: hab: Fix authenticate_image input parameters
      arm: imx: hab: Add IVT header definitions
      arm: imx: hab: Add IVT header verification
      arm: imx: hab: Verify IVT self matches calculated address
      arm: imx: hab: Only call ROM once headers are verified
      arm: imx: hab: Print CSF based on IVT descriptor
      arm: imx: hab: Print additional IVT elements during debug
      arm: imx: hab: Define rvt_check_target()
      arm: imx: hab: Implement hab_rvt_check_target
      arm: imx: hab: Add a hab_rvt_check_target to image auth
      arm: imx: hab: Print HAB event log only after calling ROM
      arm: imx: hab: Make internal functions and data static
      arm: imx: hab: Prefix authenticate_image with imx_hab
      arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled
      arm: imx: hab: Make authenticate_image() return zero on open boards
      arm: imx: hab: Make imx_hab_is_enabled global
      arm: imx: hab: Define rvt_failsafe()
      arm: imx: hab: Implement hab_rvt_failsafe
      arm: imx: hab: Add hab_failsafe console command

Christopher Spinrath (2):
      ARM: imx: cm_fx6: export board and soc info to env
      ARM: imx: cm_fx6: env: try to determine dtb to use

Eran Matityahu (2):
      imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD
boot devices
      imx7: spl: Add support for MMC3, SD3 and NAND boot devices

Fabio Estevam (4):
      mx6: ddr: Do not access MMDC_P1_BASE_ADDR on i.MX6ULL
      mx6memcal: Fix the UART ports for mx6sabresd/auto boards
      mx6memcal: spl: Also take i.MX6ULL into account
      mx6memcal: spl: Disambiguate the error message

Koen Vandeputte (1):
      drivers: pci: imx: fix enumeration logic error

Peng Fan (10):
      misc: mxc_ocotp: check fuse word before programming on i.MX7ULP
      ARM: imx: Introduce dts for i.MX6SX-SDB
      ARM: imx: Enable dts for i.MX6SX-SDB
      board: freescale: common: add pfuze dm code
      imx: mx6sxsabresd: Enable DM driver
      imx: mx6sxsabresd: config wdog pinmux
      imx: mx6sxsabresd: enlarge ENV offset
      pci: imx: request gpio before use
      spi: fsl_qspi: support i.MX6UL/6ULLL/7D
      imx: mx6ull-14x14-evk: enable DM QSPI driver

Stefano Babic (1):
      mx6: Support SKS-Kinkel sksimx6 Board

Tom Rini (4):
      arm: imx: Rework i.MX specific commands to be excluded from SPL
      imx: ventana: Rework CONFIG_CMD_EECONFIG code to not be included
in SPL
      imx: ventana: Rework CONFIG_CMD_GSC code to not be included in SPL
      toradex: imx6: Rework PF0100 fuse programming commands to not be
in SPL

 arch/arm/dts/Makefile                       |   1 +
 arch/arm/dts/imx6sx-sdb.dts                 | 138 +++++++
 arch/arm/dts/imx6sx-sdb.dtsi                | 612
++++++++++++++++++++++++++++
 arch/arm/dts/imx6ull-14x14-evk.dts          |   5 +-
 arch/arm/dts/imx6ull.dtsi                   |   9 +-
 arch/arm/include/asm/mach-imx/hab.h         |  46 ++-
 arch/arm/mach-imx/Makefile                  |   2 +
 arch/arm/mach-imx/hab.c                     | 461 ++++++++++++---------
 arch/arm/mach-imx/imx_bootaux.c             |  13 +-
 arch/arm/mach-imx/mx5/clock.c               |   4 +-
 arch/arm/mach-imx/mx6/Kconfig               |   6 +
 arch/arm/mach-imx/mx6/ddr.c                 |   4 +-
 arch/arm/mach-imx/mx7/clock.c               |   2 +
 arch/arm/mach-imx/mx7ulp/clock.c            |   2 +
 arch/arm/mach-imx/spl.c                     |  45 +-
 board/compulab/cm_fx6/cm_fx6.c              |  21 +
 board/freescale/common/Makefile             |   1 +
 board/freescale/common/pfuze.c              |  79 ++++
 board/freescale/common/pfuze.h              |   5 +
 board/freescale/mx6memcal/Kconfig           |  12 +-
 board/freescale/mx6memcal/spl.c             |   3 +-
 board/freescale/mx6sxsabresd/mx6sxsabresd.c | 382 +++++++----------
 board/gateworks/gw_ventana/eeprom.c         |   4 +-
 board/gateworks/gw_ventana/gsc.c            |   2 +-
 board/sks-kinkel/sksimx6/Kconfig            |  11 +
 board/sks-kinkel/sksimx6/MAINTAINERS        |   6 +
 board/sks-kinkel/sksimx6/Makefile           |   3 +
 board/sks-kinkel/sksimx6/sksimx6.c          | 426 +++++++++++++++++++
 board/toradex/apalis_imx6/pf0100.c          |   9 +-
 board/toradex/apalis_imx6/pf0100.h          |   3 -
 board/toradex/colibri_imx6/pf0100.c         |   8 +-
 board/toradex/colibri_imx6/pf0100.h         |   3 -
 configs/cm_fx6_defconfig                    |   2 +-
 configs/mx6sxsabresd_defconfig              |  15 +-
 configs/mx6sxsabresd_spl_defconfig          |  15 +-
 configs/mx6ull_14x14_evk_defconfig          |   6 +
 configs/mx6ull_14x14_evk_plugin_defconfig   |   6 +
 configs/sksimx6_defconfig                   |  47 +++
 drivers/misc/mxc_ocotp.c                    |  17 +
 drivers/pci/pcie_imx.c                      |  15 +
 drivers/spi/fsl_qspi.c                      |  18 +-
 include/configs/cm_fx6.h                    |   7 +
 include/configs/mx6sxsabresd.h              |   9 +-
 include/configs/mx6ullevk.h                 |  10 +
 include/configs/sksimx6.h                   | 101 +++++
 45 files changed, 2103 insertions(+), 493 deletions(-)
 create mode 100644 arch/arm/dts/imx6sx-sdb.dts
 create mode 100644 arch/arm/dts/imx6sx-sdb.dtsi
 create mode 100644 board/sks-kinkel/sksimx6/Kconfig
 create mode 100644 board/sks-kinkel/sksimx6/MAINTAINERS
 create mode 100644 board/sks-kinkel/sksimx6/Makefile
 create mode 100644 board/sks-kinkel/sksimx6/sksimx6.c
 create mode 100644 configs/sksimx6_defconfig
 create mode 100644 include/configs/sksimx6.h


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-01-08 16:54 Stefano Babic
  2018-01-08 17:38 ` Tom Rini
@ 2018-01-08 21:26 ` Tom Rini
  1 sibling, 0 replies; 307+ messages in thread
From: Tom Rini @ 2018-01-08 21:26 UTC (permalink / raw)
  To: u-boot

On Mon, Jan 08, 2018 at 05:54:38PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> some fixes, please pull from u-boot-imx, thanks !
> 
> The following changes since commit 1314bd1192b4c67d28bdae7eee639588e88090cd:
> 
>   boards: amlogic: khadas-vim: Typo fixup (2018-01-02 07:57:34 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to ca9d211e2c7801bc3e194d325ece0d3b583b32d2:
> 
>   mtd: nand: mxs_nand_spl: Remove nand size print (2018-01-08 17:37:12
> +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180108/5b4ef006/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-01-08 17:50   ` Stefano Babic
@ 2018-01-08 21:26     ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2018-01-08 21:26 UTC (permalink / raw)
  To: u-boot

On Mon, Jan 08, 2018 at 06:50:36PM +0100, Stefano Babic wrote:
> Hi Tom,
> 
> On 08/01/2018 18:38, Tom Rini wrote:
> > On Mon, Jan 08, 2018 at 05:54:38PM +0100, Stefano Babic wrote:
> >> Hi Tom,
> >>
> >> some fixes, please pull from u-boot-imx, thanks !
> >>
> >> The following changes since commit 1314bd1192b4c67d28bdae7eee639588e88090cd:
> >>
> >>   boards: amlogic: khadas-vim: Typo fixup (2018-01-02 07:57:34 -0500)
> >>
> >> are available in the git repository at:
> >>
> >>   git://www.denx.de/git/u-boot-imx.git master
> >>
> >> for you to fetch changes up to ca9d211e2c7801bc3e194d325ece0d3b583b32d2:
> >>
> >>   mtd: nand: mxs_nand_spl: Remove nand size print (2018-01-08 17:37:12
> >> +0100)
> >>
> >> ----------------------------------------------------------------
> >> Christopher Spinrath (3):
> >>       ARM: imx: cm_fx6: env: use standard variables
> >>       ARM: imx: cm_fx6: env: support distro boot command
> >>       ARM: imx: cm_fx6: env: don't run boot scripts twice
> >>
> >> Eran Matityahu (1):
> >>       imx: spl: Fix NAND bootmode detection
> >>
> >> Eric Nelson (1):
> >>       mx6: Add board mx6memcal for use in validating DDR
> >>
> >> Fabio Estevam (1):
> >>       mx6ull: Handle the CONFIG_MX6ULL cases correctly
> >>
> >> Jagan Teki (2):
> >>       board: engicam: Fix to remove legacy board/icorem6_rqs
> >>       mtd: nand: mxs_nand_spl: Remove nand size print
> >>
> >> Stefan Agner (3):
> >>       imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig
> >>       imx: introduce CONFIG_GPT_TIMER
> >>       imx: initialize and use generic timer on i.MX 6UL/ULL
> > 
> > It's release day.  How many of these are release day candidate fixes?  I
> > know the MX6ULL thing is important, and the SPL bootmode thing looks so
> > too.
> 
> Yes, both are important - for MX6ULL this means both Fabio's and
> Stefan's patches. Eran's is a fix, too, and it should be in.
> 
> Jagan's is just a cleanup - this drops dead code in a Engicam board, and
> drop a couple of nasty print when booting from NAND. No big issue, but
> also no effects on the rest of code.
> 
> >  I do not know about the rest, are they?  Thanks!
> 
> It remains Cristopher's (small fixes just for cm_fx6 board) and Eric's.
> The last one is a very interesting thing because it replaces the
> proprietary ddr-stress tool from Freescale. It is not a fix, but it is
> very nice to have. It adds another target, so there is no changes in
> common code and if you do not argue, it will be nice to have in release.

OK.  I'm going to take it (applied message coming shortly) since we're
just now exiting the general US/EU winter holiday time-frame and I'll
use that as why most of this wasn't sent much sooner.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180108/f1480456/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-01-08 17:38 ` Tom Rini
@ 2018-01-08 17:50   ` Stefano Babic
  2018-01-08 21:26     ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2018-01-08 17:50 UTC (permalink / raw)
  To: u-boot

Hi Tom,

On 08/01/2018 18:38, Tom Rini wrote:
> On Mon, Jan 08, 2018 at 05:54:38PM +0100, Stefano Babic wrote:
>> Hi Tom,
>>
>> some fixes, please pull from u-boot-imx, thanks !
>>
>> The following changes since commit 1314bd1192b4c67d28bdae7eee639588e88090cd:
>>
>>   boards: amlogic: khadas-vim: Typo fixup (2018-01-02 07:57:34 -0500)
>>
>> are available in the git repository at:
>>
>>   git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to ca9d211e2c7801bc3e194d325ece0d3b583b32d2:
>>
>>   mtd: nand: mxs_nand_spl: Remove nand size print (2018-01-08 17:37:12
>> +0100)
>>
>> ----------------------------------------------------------------
>> Christopher Spinrath (3):
>>       ARM: imx: cm_fx6: env: use standard variables
>>       ARM: imx: cm_fx6: env: support distro boot command
>>       ARM: imx: cm_fx6: env: don't run boot scripts twice
>>
>> Eran Matityahu (1):
>>       imx: spl: Fix NAND bootmode detection
>>
>> Eric Nelson (1):
>>       mx6: Add board mx6memcal for use in validating DDR
>>
>> Fabio Estevam (1):
>>       mx6ull: Handle the CONFIG_MX6ULL cases correctly
>>
>> Jagan Teki (2):
>>       board: engicam: Fix to remove legacy board/icorem6_rqs
>>       mtd: nand: mxs_nand_spl: Remove nand size print
>>
>> Stefan Agner (3):
>>       imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig
>>       imx: introduce CONFIG_GPT_TIMER
>>       imx: initialize and use generic timer on i.MX 6UL/ULL
> 
> It's release day.  How many of these are release day candidate fixes?  I
> know the MX6ULL thing is important, and the SPL bootmode thing looks so
> too.

Yes, both are important - for MX6ULL this means both Fabio's and
Stefan's patches. Eran's is a fix, too, and it should be in.

Jagan's is just a cleanup - this drops dead code in a Engicam board, and
drop a couple of nasty print when booting from NAND. No big issue, but
also no effects on the rest of code.

>  I do not know about the rest, are they?  Thanks!

It remains Cristopher's (small fixes just for cm_fx6 board) and Eric's.
The last one is a very interesting thing because it replaces the
proprietary ddr-stress tool from Freescale. It is not a fix, but it is
very nice to have. It adds another target, so there is no changes in
common code and if you do not argue, it will be nice to have in release.

Best regards,
Stefano



-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2018-01-08 16:54 Stefano Babic
@ 2018-01-08 17:38 ` Tom Rini
  2018-01-08 17:50   ` Stefano Babic
  2018-01-08 21:26 ` Tom Rini
  1 sibling, 1 reply; 307+ messages in thread
From: Tom Rini @ 2018-01-08 17:38 UTC (permalink / raw)
  To: u-boot

On Mon, Jan 08, 2018 at 05:54:38PM +0100, Stefano Babic wrote:
> Hi Tom,
> 
> some fixes, please pull from u-boot-imx, thanks !
> 
> The following changes since commit 1314bd1192b4c67d28bdae7eee639588e88090cd:
> 
>   boards: amlogic: khadas-vim: Typo fixup (2018-01-02 07:57:34 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to ca9d211e2c7801bc3e194d325ece0d3b583b32d2:
> 
>   mtd: nand: mxs_nand_spl: Remove nand size print (2018-01-08 17:37:12
> +0100)
> 
> ----------------------------------------------------------------
> Christopher Spinrath (3):
>       ARM: imx: cm_fx6: env: use standard variables
>       ARM: imx: cm_fx6: env: support distro boot command
>       ARM: imx: cm_fx6: env: don't run boot scripts twice
> 
> Eran Matityahu (1):
>       imx: spl: Fix NAND bootmode detection
> 
> Eric Nelson (1):
>       mx6: Add board mx6memcal for use in validating DDR
> 
> Fabio Estevam (1):
>       mx6ull: Handle the CONFIG_MX6ULL cases correctly
> 
> Jagan Teki (2):
>       board: engicam: Fix to remove legacy board/icorem6_rqs
>       mtd: nand: mxs_nand_spl: Remove nand size print
> 
> Stefan Agner (3):
>       imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig
>       imx: introduce CONFIG_GPT_TIMER
>       imx: initialize and use generic timer on i.MX 6UL/ULL

It's release day.  How many of these are release day candidate fixes?  I
know the MX6ULL thing is important, and the SPL bootmode thing looks so
too.  I do not know about the rest, are they?  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180108/c293d0f6/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2018-01-08 16:54 Stefano Babic
  2018-01-08 17:38 ` Tom Rini
  2018-01-08 21:26 ` Tom Rini
  0 siblings, 2 replies; 307+ messages in thread
From: Stefano Babic @ 2018-01-08 16:54 UTC (permalink / raw)
  To: u-boot

Hi Tom,

some fixes, please pull from u-boot-imx, thanks !

The following changes since commit 1314bd1192b4c67d28bdae7eee639588e88090cd:

  boards: amlogic: khadas-vim: Typo fixup (2018-01-02 07:57:34 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to ca9d211e2c7801bc3e194d325ece0d3b583b32d2:

  mtd: nand: mxs_nand_spl: Remove nand size print (2018-01-08 17:37:12
+0100)

----------------------------------------------------------------
Christopher Spinrath (3):
      ARM: imx: cm_fx6: env: use standard variables
      ARM: imx: cm_fx6: env: support distro boot command
      ARM: imx: cm_fx6: env: don't run boot scripts twice

Eran Matityahu (1):
      imx: spl: Fix NAND bootmode detection

Eric Nelson (1):
      mx6: Add board mx6memcal for use in validating DDR

Fabio Estevam (1):
      mx6ull: Handle the CONFIG_MX6ULL cases correctly

Jagan Teki (2):
      board: engicam: Fix to remove legacy board/icorem6_rqs
      mtd: nand: mxs_nand_spl: Remove nand size print

Stefan Agner (3):
      imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig
      imx: introduce CONFIG_GPT_TIMER
      imx: initialize and use generic timer on i.MX 6UL/ULL

 arch/arm/include/asm/arch-mx6/imx-regs.h   |  24 +++--
 arch/arm/include/asm/arch-mx6/mx6-ddr.h    |   2 +-
 arch/arm/include/asm/arch-mx6/mx6ul-ddr.h  |   2 +-
 arch/arm/include/asm/mach-imx/iomux-v3.h   |   4 +-
 arch/arm/include/asm/mach-imx/regs-lcdif.h |  19 ++--
 arch/arm/include/asm/mach-imx/sys_proto.h  |   3 +-
 arch/arm/mach-imx/Kconfig                  |   6 ++
 arch/arm/mach-imx/Makefile                 |   5 +-
 arch/arm/mach-imx/mx5/Kconfig              |   1 +
 arch/arm/mach-imx/mx6/Kconfig              |  14 ++-
 arch/arm/mach-imx/mx6/ddr.c                |   2 +-
 arch/arm/mach-imx/mx7/Kconfig              |   1 +
 arch/arm/mach-imx/spl.c                    |   2 +-
 board/engicam/common/board.c               |   2 +-
 board/engicam/icorem6_rqs/icorem6_rqs.c    |  48 ---------
 board/freescale/mx6memcal/Kconfig          | 235
++++++++++++++++++++++++++++++++++++++++++++
 board/freescale/mx6memcal/MAINTAINERS      |   7 ++
 board/freescale/mx6memcal/Makefile         |  13 +++
 board/freescale/mx6memcal/README           |  49 ++++++++++
 board/freescale/mx6memcal/mx6memcal.c      |  32 ++++++
 board/freescale/mx6memcal/spl.c            | 456
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 configs/cm_fx6_defconfig                   |   2 +
 configs/mx6memcal_defconfig                |  33 +++++++
 drivers/gpio/mxc_gpio.c                    |   4 +-
 drivers/mtd/nand/mxs_nand_spl.c            |   2 -
 include/configs/cm_fx6.h                   |  80 ++++++++-------
 include/configs/imx6_spl.h                 |   3 +-
 include/configs/mx6_common.h               |  10 +-
 include/configs/mx6memcal.h                |  59 +++++++++++
 include/configs/mx7_common.h               |   1 -
 scripts/config_whitelist.txt               |   2 +-
 31 files changed, 1001 insertions(+), 122 deletions(-)
 delete mode 100644 board/engicam/icorem6_rqs/icorem6_rqs.c
 create mode 100644 board/freescale/mx6memcal/Kconfig
 create mode 100644 board/freescale/mx6memcal/MAINTAINERS
 create mode 100644 board/freescale/mx6memcal/Makefile
 create mode 100644 board/freescale/mx6memcal/README
 create mode 100644 board/freescale/mx6memcal/mx6memcal.c
 create mode 100644 board/freescale/mx6memcal/spl.c
 create mode 100644 configs/mx6memcal_defconfig
 create mode 100644 include/configs/mx6memcal.h



-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-12-29 10:51 Stefano Babic
@ 2017-12-30  1:19 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-12-30  1:19 UTC (permalink / raw)
  To: u-boot

On Fri, Dec 29, 2017 at 11:51:43AM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks! Series with patch causing warning:
> 
> Hannu Lounento (5):
>       net: e1000: add support for writing to EEPROM
> 
> is dropped from PR until issues will be fixed. This caused a rebasing of
> my tree.
> 
> 
> The following changes since commit 48a346061d1f0a7eff566f6a7cc7eeeba7efb1e2:
> 
>   Merge git://git.denx.de/u-boot-x86 (2017-12-21 09:54:10 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to d6abd1d53992cf863019aed1251924c45893a46b:
> 
>   arm: imx: add tzic interrupt controller for imx53 (2017-12-29 11:18:59
> +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171229/f4f7d62a/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-12-29 10:51 Stefano Babic
  2017-12-30  1:19 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-12-29 10:51 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks! Series with patch causing warning:

Hannu Lounento (5):
      net: e1000: add support for writing to EEPROM

is dropped from PR until issues will be fixed. This caused a rebasing of
my tree.


The following changes since commit 48a346061d1f0a7eff566f6a7cc7eeeba7efb1e2:

  Merge git://git.denx.de/u-boot-x86 (2017-12-21 09:54:10 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to d6abd1d53992cf863019aed1251924c45893a46b:

  arm: imx: add tzic interrupt controller for imx53 (2017-12-29 11:18:59
+0100)

----------------------------------------------------------------
Adam Ford (1):
      mx6_common: remove dead code

Breno Lima (5):
      mx6slevk: imximage.cfg: Handle the CONFIG_SECURE_BOOT case
      warp: imximage.cfg: Handle the CONFIG_SECURE_BOOT case
      mx6sl: Select MX6SL option via Kconfig
      Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL
      imx: Kconfig: Add HAS_CAAM option

Christopher Spinrath (4):
      ARM: imx: cm-fx6: reinstate USB support by syncing the devicetree
with Linux
      ARM: imx: cm_fx6: defconfig: enable CONFIG_DM_KEYBOARD
      ARM: imx: cm_fx6: remove sata init code from board file
      ARM: imx: cm_fx6: remove esdhc init code from board file

Fabio Estevam (3):
      imx: Unify CONFIG_BOOTDELAY
      imx: Add a common way for detecting NXP boards revision
      mx6sxsabresd: Load the correct dtb for revA board

Lukasz Majewski (1):
      ARM: imx: display5: config: Update display5_factory_defconfig to
use USE_BOOTCOMMAND

Marek Vasut (1):
      ARM: imx6: Disable DDR DRAM calibration DHCOM i.MX6 PDK

Martyn Welch (1):
      board: ge: mx53ppd: Move check_time() to common location


Vagrant Cascadian (1):
      imx: Fix missing spl_sd configuration for wandboard.

 arch/arm/dts/imx53.dtsi                     |   8 +++
 arch/arm/dts/imx6q-cm-fx6.dts               | 396
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------
 arch/arm/include/asm/mach-imx/sys_proto.h   |   3 ++
 arch/arm/mach-imx/Kconfig                   |  13 ++++-
 arch/arm/mach-imx/cpu.c                     |  25 +++++++++
 arch/arm/mach-imx/mx6/Kconfig               |  13 ++++-
 arch/arm/mach-imx/mx7/Kconfig               |   1 +
 board/compulab/cm_fx6/cm_fx6.c              |  71 -------------------------
 board/dhelectronics/dh_imx6/dh_imx6_spl.c   |   4 --
 board/freescale/mx6sabreauto/mx6sabreauto.c |  47 +---------------
 board/freescale/mx6slevk/imximage.cfg       |   9 ++++
 board/freescale/mx6sxsabresd/mx6sxsabresd.c |  16 +++++-
 board/ge/common/Makefile                    |   2 +-
 board/ge/common/ge_common.c                 |  55 +++++++++++++++++++
 board/ge/common/ge_common.h                 |   7 +++
 board/ge/mx53ppd/mx53ppd.c                  |  47 +---------------
 board/warp/imximage.cfg                     |   9 ++++
 configs/cm_fx6_defconfig                    |   1 +
 configs/display5_factory_defconfig          |   2 +
 configs/mx23evk_defconfig                   |   1 -
 configs/mx25pdk_defconfig                   |   1 -
 configs/mx28evk_auart_console_defconfig     |   1 -
 configs/mx28evk_defconfig                   |   1 -
 configs/mx28evk_nand_defconfig              |   1 -
 configs/mx28evk_spi_defconfig               |   1 -
 configs/mx31ads_defconfig                   |   1 -
 configs/mx31pdk_defconfig                   |   1 -
 configs/mx35pdk_defconfig                   |   1 -
 configs/mx51evk_defconfig                   |   1 -
 configs/mx53ard_defconfig                   |   1 -
 configs/mx53evk_defconfig                   |   1 -
 configs/mx53loco_defconfig                  |   1 -
 configs/mx53smd_defconfig                   |   1 -
 configs/mx6sabreauto_defconfig              |   2 +-
 configs/mx6sabresd_defconfig                |   1 -
 configs/mx6slevk_defconfig                  |   3 +-
 configs/mx6slevk_spinor_defconfig           |   3 +-
 configs/mx6slevk_spl_defconfig              |   3 +-
 configs/mx6sllevk_defconfig                 |   1 -
 configs/mx6sllevk_plugin_defconfig          |   1 -
 configs/mx6sxsabreauto_defconfig            |   1 -
 configs/mx6sxsabresd_defconfig              |   2 +-
 configs/mx6sxsabresd_spl_defconfig          |   2 +-
 configs/mx6ul_14x14_evk_defconfig           |   1 -
 configs/mx6ul_9x9_evk_defconfig             |   1 -
 configs/mx6ull_14x14_evk_defconfig          |   1 -
 configs/mx6ull_14x14_evk_plugin_defconfig   |   1 -
 configs/mx7dsabresd_defconfig               |   1 -
 configs/mx7dsabresd_secure_defconfig        |   1 -
 configs/wandboard_defconfig                 |   1 +
 configs/warp_defconfig                      |   2 +-
 include/configs/mx6_common.h                |   3 --
 include/configs/mx6sxsabresd.h              |   8 ++-
 include/power/pmic.h                        |   1 +
 54 files changed, 520 insertions(+), 263 deletions(-)
 create mode 100644 board/ge/common/ge_common.c
 create mode 100644 board/ge/common/ge_common.h


Best regards,
Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-12-18  0:04   ` Fabio Estevam
@ 2017-12-18  1:45     ` Peng Fan
  0 siblings, 0 replies; 307+ messages in thread
From: Peng Fan @ 2017-12-18  1:45 UTC (permalink / raw)
  To: u-boot



> -----Original Message-----
> From: Fabio Estevam [mailto:festevam at gmail.com]
> Sent: Monday, December 18, 2017 8:04 AM
> To: Tom Rini <trini@konsulko.com>; Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>; U-Boot Mailing List <u-
> boot at lists.denx.de>
> Subject: Re: [U-Boot] [PULL] Please pull u-boot-imx
> 
> Adding Peng
> 
> On Sun, Dec 17, 2017 at 5:26 PM, Tom Rini <trini@konsulko.com> wrote:
> > On Sun, Dec 17, 2017 at 11:39:33AM +0100, Stefano Babic wrote:
> >> Hi Tom,
> >>
> >> please pull from u-boot-imx, thanks !
> >>
> >> The following changes since commit
> fcc8250c2f7c982f3593a8eecf737f8e2c95f222:
> >>
> >>   Merge git://git.denx.de/u-boot-mips (2017-11-28 16:54:30 -0500)
> >>
> >> are available in the git repository at:
> >>
> >>   git://www.denx.de/git/u-boot-imx.git master
> >
> > NAK.
> >
> > [snip]
> >> Peng Fan (2):
> >>       power: pmic.h: include dm/ofnode.h
> >>       power: pmic/regulator allow dm be omitted by SPL
> >
> > The second patch here breaks rockchip (phycore-rk3288 at least) and
> > does not introduce a 'config SPL_DM_PMIC' symbol that would allow for
> > platforms to enable that still so that it's not dropped when required.
> > If you cannot defer that patch for now (I know there are some critical
> > patches in your PR), please re-work it so we do have SPL_DM_PMIC/etc
> > so that we have no size differences on rockchip (buildman --step 0
> > -SBCdevelk foo && buildman -SsBdevelk --step 0 foo is how I do that).
> > Thanks!

Share on me. Please drop the second patch.

> 
> Peng, please fix this build issue for your v3 series.

I'll fix it in my second patch.

Thanks,
Peng.

> 
> Thanks

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-12-17 19:26 ` Tom Rini
  2017-12-17 21:32   ` Stefano Babic
@ 2017-12-18  0:04   ` Fabio Estevam
  2017-12-18  1:45     ` Peng Fan
  1 sibling, 1 reply; 307+ messages in thread
From: Fabio Estevam @ 2017-12-18  0:04 UTC (permalink / raw)
  To: u-boot

Adding Peng

On Sun, Dec 17, 2017 at 5:26 PM, Tom Rini <trini@konsulko.com> wrote:
> On Sun, Dec 17, 2017 at 11:39:33AM +0100, Stefano Babic wrote:
>> Hi Tom,
>>
>> please pull from u-boot-imx, thanks !
>>
>> The following changes since commit fcc8250c2f7c982f3593a8eecf737f8e2c95f222:
>>
>>   Merge git://git.denx.de/u-boot-mips (2017-11-28 16:54:30 -0500)
>>
>> are available in the git repository at:
>>
>>   git://www.denx.de/git/u-boot-imx.git master
>
> NAK.
>
> [snip]
>> Peng Fan (2):
>>       power: pmic.h: include dm/ofnode.h
>>       power: pmic/regulator allow dm be omitted by SPL
>
> The second patch here breaks rockchip (phycore-rk3288 at least) and does
> not introduce a 'config SPL_DM_PMIC' symbol that would allow for
> platforms to enable that still so that it's not dropped when required.
> If you cannot defer that patch for now (I know there are some critical
> patches in your PR), please re-work it so we do have SPL_DM_PMIC/etc so
> that we have no size differences on rockchip (buildman --step 0
> -SBCdevelk foo && buildman -SsBdevelk --step 0 foo is how I do that).
> Thanks!

Peng, please fix this build issue for your v3 series.

Thanks

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-12-17 19:26 ` Tom Rini
@ 2017-12-17 21:32   ` Stefano Babic
  2017-12-18  0:04   ` Fabio Estevam
  1 sibling, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2017-12-17 21:32 UTC (permalink / raw)
  To: u-boot

Hi Tom,

On 17/12/2017 20:26, Tom Rini wrote:
> On Sun, Dec 17, 2017 at 11:39:33AM +0100, Stefano Babic wrote:
>> Hi Tom,
>>
>> please pull from u-boot-imx, thanks !
>>
>> The following changes since commit fcc8250c2f7c982f3593a8eecf737f8e2c95f222:
>>
>>   Merge git://git.denx.de/u-boot-mips (2017-11-28 16:54:30 -0500)
>>
>> are available in the git repository at:
>>
>>   git://www.denx.de/git/u-boot-imx.git master
> 
> NAK.
> 
> [snip]
>> Peng Fan (2):
>>       power: pmic.h: include dm/ofnode.h
>>       power: pmic/regulator allow dm be omitted by SPL
> 
> The second patch here breaks rockchip (phycore-rk3288 at least) and does
> not introduce a 'config SPL_DM_PMIC' symbol that would allow for
> platforms to enable that still so that it's not dropped when required.
> If you cannot defer that patch for now

This was just a preparation for MX8, discussed with Peng. I have not
seen that it breaks rockchip, sorry. It can be dropped for the moment,
waiting until Peng will resend a new version fixing the issues.

> (I know there are some critical
> patches in your PR), please re-work it so we do have SPL_DM_PMIC/etc so
> that we have no size differences on rockchip (buildman --step 0
> -SBCdevelk foo && buildman -SsBdevelk --step 0 foo is how I do that).
> Thanks!

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-12-17 10:39 Stefano Babic
@ 2017-12-17 19:26 ` Tom Rini
  2017-12-17 21:32   ` Stefano Babic
  2017-12-18  0:04   ` Fabio Estevam
  0 siblings, 2 replies; 307+ messages in thread
From: Tom Rini @ 2017-12-17 19:26 UTC (permalink / raw)
  To: u-boot

On Sun, Dec 17, 2017 at 11:39:33AM +0100, Stefano Babic wrote:
> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit fcc8250c2f7c982f3593a8eecf737f8e2c95f222:
> 
>   Merge git://git.denx.de/u-boot-mips (2017-11-28 16:54:30 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master

NAK.

[snip]
> Peng Fan (2):
>       power: pmic.h: include dm/ofnode.h
>       power: pmic/regulator allow dm be omitted by SPL

The second patch here breaks rockchip (phycore-rk3288 at least) and does
not introduce a 'config SPL_DM_PMIC' symbol that would allow for
platforms to enable that still so that it's not dropped when required.
If you cannot defer that patch for now (I know there are some critical
patches in your PR), please re-work it so we do have SPL_DM_PMIC/etc so
that we have no size differences on rockchip (buildman --step 0
-SBCdevelk foo && buildman -SsBdevelk --step 0 foo is how I do that).
Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171217/9a4b61a2/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-12-17 10:39 Stefano Babic
  2017-12-17 19:26 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-12-17 10:39 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit fcc8250c2f7c982f3593a8eecf737f8e2c95f222:

  Merge git://git.denx.de/u-boot-mips (2017-11-28 16:54:30 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 1040d801f8ffe96c7eff16454a4529fdf1d46c50:

  arm: imx: add tzic interrupt controller for imx53 (2017-12-17 11:08:38
+0100)

----------------------------------------------------------------
Adam Ford (1):
      mx6_common: remove dead code

Breno Lima (5):
      mx6slevk: imximage.cfg: Handle the CONFIG_SECURE_BOOT case
      warp: imximage.cfg: Handle the CONFIG_SECURE_BOOT case
      mx6sl: Select MX6SL option via Kconfig
      Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL
      imx: Kconfig: Add HAS_CAAM option

Christopher Spinrath (4):
      ARM: imx: cm-fx6: reinstate USB support by syncing the devicetree
with Linux
      ARM: imx: cm_fx6: defconfig: enable CONFIG_DM_KEYBOARD
      ARM: imx: cm_fx6: remove sata init code from board file
      ARM: imx: cm_fx6: remove esdhc init code from board file

Fabio Estevam (3):
      imx: Unify CONFIG_BOOTDELAY
      imx: Add a common way for detecting NXP boards revision
      mx6sxsabresd: Load the correct dtb for revA board

Hannu Lounento (5):
      net: e1000: add support for writing to EEPROM
      net: e1000: split e1000_read_mac_addr
      net: e1000: implement eth_write_hwaddr
      board: ge: bx50v3: program MAC address to I210
      board: ge: bx50v3: mount rootfs read-only

Ian Ray (5):
      configs: Add network device support for bx50v3 products
      board: ge: bx50v3: Support FIT and select configuration based on VPD
      config: ge_bx50v3: read boot script
      configs: ge_bx50v3: enable bootcount
      configs: ge_bx50v3: automatic partition selection and video output
failure message

Lukasz Majewski (1):
      ARM: imx: display5: config: Update display5_factory_defconfig to
use USE_BOOTCOMMAND

Marek Vasut (1):
      ARM: imx6: Disable DDR DRAM calibration DHCOM i.MX6 PDK

Martyn Welch (4):
      board: ge: mx53ppd: Move check_time() to common location
      board: ge: Enable access to i2c bus 1 and 2
      board: ge: bx50v3: move FEC MAC address programming to driver
      board: ge: bx50v3: Enable hardware watchdog

Nandor Han (2):
      rtc: adding RX8010SJ rtc driver
      board,ge,bx50v3 - rtc time validation

Patrick Bruenn (1):
      arm: imx: add tzic interrupt controller for imx53

Peng Fan (2):
      power: pmic.h: include dm/ofnode.h
      power: pmic/regulator allow dm be omitted by SPL

Vagrant Cascadian (1):
      imx: Fix missing spl_sd configuration for wandboard.

 arch/arm/dts/imx53.dtsi                     |   8 ++
 arch/arm/dts/imx6q-cm-fx6.dts               | 396
+++++++++++++++++++++++++++++++++++++++++++++++--------
 arch/arm/include/asm/mach-imx/sys_proto.h   |   3 +
 arch/arm/mach-imx/Kconfig                   |  13 +-
 arch/arm/mach-imx/cpu.c                     |  25 ++++
 arch/arm/mach-imx/mx6/Kconfig               |  13 +-
 arch/arm/mach-imx/mx7/Kconfig               |   1 +
 board/compulab/cm_fx6/cm_fx6.c              |  71 ----------
 board/dhelectronics/dh_imx6/dh_imx6_spl.c   |   4 -
 board/freescale/mx6sabreauto/mx6sabreauto.c |  47 +------
 board/freescale/mx6slevk/imximage.cfg       |   9 ++
 board/freescale/mx6sxsabresd/mx6sxsabresd.c |  16 ++-
 board/ge/bx50v3/bx50v3.c                    | 130 ++++++++++++------
 board/ge/common/Makefile                    |   2 +-
 board/ge/common/ge_common.c                 |  55 ++++++++
 board/ge/common/ge_common.h                 |   7 +
 board/ge/mx53ppd/mx53ppd.c                  |  47 +------
 board/warp/imximage.cfg                     |   9 ++
 configs/cm_fx6_defconfig                    |   1 +
 configs/display5_factory_defconfig          |   4 +-
 configs/ge_b450v3_defconfig                 |   7 +-
 configs/ge_b650v3_defconfig                 |   7 +-
 configs/ge_b850v3_defconfig                 |   8 +-
 configs/mx23evk_defconfig                   |   1 -
 configs/mx25pdk_defconfig                   |   1 -
 configs/mx28evk_auart_console_defconfig     |   1 -
 configs/mx28evk_defconfig                   |   1 -
 configs/mx28evk_nand_defconfig              |   1 -
 configs/mx28evk_spi_defconfig               |   1 -
 configs/mx31ads_defconfig                   |   1 -
 configs/mx31pdk_defconfig                   |   1 -
 configs/mx35pdk_defconfig                   |   1 -
 configs/mx51evk_defconfig                   |   1 -
 configs/mx53ard_defconfig                   |   1 -
 configs/mx53evk_defconfig                   |   1 -
 configs/mx53loco_defconfig                  |   1 -
 configs/mx53smd_defconfig                   |   1 -
 configs/mx6sabreauto_defconfig              |   2 +-
 configs/mx6sabresd_defconfig                |   1 -
 configs/mx6slevk_defconfig                  |   3 +-
 configs/mx6slevk_spinor_defconfig           |   3 +-
 configs/mx6slevk_spl_defconfig              |   3 +-
 configs/mx6sllevk_defconfig                 |   1 -
 configs/mx6sllevk_plugin_defconfig          |   1 -
 configs/mx6sxsabreauto_defconfig            |   1 -
 configs/mx6sxsabresd_defconfig              |   2 +-
 configs/mx6sxsabresd_spl_defconfig          |   2 +-
 configs/mx6ul_14x14_evk_defconfig           |   1 -
 configs/mx6ul_9x9_evk_defconfig             |   1 -
 configs/mx6ull_14x14_evk_defconfig          |   1 -
 configs/mx6ull_14x14_evk_plugin_defconfig   |   1 -
 configs/mx7dsabresd_defconfig               |   1 -
 configs/mx7dsabresd_secure_defconfig        |   1 -
 configs/wandboard_defconfig                 |   1 +
 configs/warp_defconfig                      |   2 +-
 drivers/net/e1000.c                         | 292
+++++++++++++++++++++++++++++++++++++---
 drivers/net/e1000.h                         |   3 +
 drivers/power/pmic/Makefile                 |   4 +-
 drivers/power/regulator/Makefile            |   2 +-
 drivers/rtc/Kconfig                         |   6 +
 drivers/rtc/Makefile                        |   1 +
 drivers/rtc/rx8010sj.c                      | 378
++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/configs/ge_bx50v3.h                 | 190
+++++++++++---------------
 include/configs/mx6_common.h                |   3 -
 include/configs/mx6sxsabresd.h              |   8 +-
 include/power/pmic.h                        |   1 +
 66 files changed, 1370 insertions(+), 443 deletions(-)
 create mode 100644 board/ge/common/ge_common.c
 create mode 100644 board/ge/common/ge_common.h
 create mode 100644 drivers/rtc/rx8010sj.c


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-11-27 10:04 Stefano Babic
@ 2017-11-28 14:19 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-11-28 14:19 UTC (permalink / raw)
  To: u-boot

On Mon, Nov 27, 2017 at 11:04:11AM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> 
> The following changes since commit c253573f3e269fd9a24ee6684d87dd91106018a5:
> 
>   Prepare v2017.11 (2017-11-13 20:08:06 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 5451ca4da99f09bce7a693056865c93c1182f183:
> 
>   configs: icore-rqs: Enable falcon mode (2017-11-27 10:36:40 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171128/79562e81/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-11-27 10:04 Stefano Babic
  2017-11-28 14:19 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-11-27 10:04 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !


The following changes since commit c253573f3e269fd9a24ee6684d87dd91106018a5:

  Prepare v2017.11 (2017-11-13 20:08:06 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 5451ca4da99f09bce7a693056865c93c1182f183:

  configs: icore-rqs: Enable falcon mode (2017-11-27 10:36:40 +0100)

----------------------------------------------------------------
Fabio Berton (6):
      pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variable
      pico-imx6ul: Use PARTUUID to specify the rootfs location
      pico-imx6ul: Add boot and rootfs dfu_alt_info
      pico-imx6ul: Define partition layout in the environment
      pico-imx6ul: Add function to create gpt partitions
      pico-imx6ul: Use FS_GENERIC load command

Fabio Estevam (7):
      Revert "wandboard: Remove unnecessary delay"
      mx6: Select MX6QDL option via Kconfig
      mx6sabreauto: Remove unneeded SPL selection
      mx6ull: Fix WDOG3 base address
      imx: Also clear powerdown enable bit for WDOG3 on i.MX6ULL
      imx: Remove boolean parameter from wdog powerdown function
      mx6sxsabresd: Use PARTUUID to specify the rootfs location

Ian Ray (2):
      ext4: recover from filesystem corruption when reading
      bootcount: add support for bootcounter on EXT filesystem

Jagan Teki (9):
      i.MX6: engicam: Move set_fdt_file to common
      i.MX6Q: icorem6: Move spl load fit to common/spl
      i.MX6Q: icore: Add SPL_OF_CONTROL support
      pinctrl: imx6ul: Fix pinctrl data overlapped with DT area
      i.MX6UL: icore: Add SPL_OF_CONTROL support
      board: icore-rqs: Fix mmc get env device
      i.MX6: engicam: Add imx6q/imx6ul boards for existing boards
      engicam: imx6q: Return mmc dev 0 for icore
      configs: icore-rqs: Enable falcon mode

Marek Vasut (1):
      ARM: imx6: Adjust DDR DRAM settings on DHCOM i.MX6 PDK

Martyn Welch (3):
      pwm: imx: Enable PWM support on i.MX53
      arm: mx5: Add more register definitions
      board: ge: make VPD code common

Nandor Han (2):
      imx: mxc_i2c: tweak the i2c transfer method
      rtc: add support for s35392a

Peter Senna Tschudin (1):
      mx53: Add Board support for GE PPD

 README                                               |   7 ++
 arch/arm/dts/imx6qdl-icore-rqs.dtsi                  |   7 ++
 arch/arm/dts/imx6qdl-icore.dtsi                      |   2 +
 arch/arm/dts/imx6qdl.dtsi                            |   5 ++
 arch/arm/dts/imx6ul-geam-kit.dts                     |   4 +
 arch/arm/dts/imx6ul-isiot-emmc.dts                   |   2 +
 arch/arm/dts/imx6ul-isiot.dtsi                       |   2 +
 arch/arm/dts/imx6ul.dtsi                             |   6 ++
 arch/arm/include/asm/arch-mx5/crm_regs.h             |   8 ++
 arch/arm/include/asm/arch-mx5/imx-regs.h             |  50 +++++++++++
 arch/arm/include/asm/arch-mx6/imx-regs.h             |   2 +-
 arch/arm/include/asm/mach-imx/sys_proto.h            |   2 +-
 arch/arm/mach-imx/init.c                             |  12 +--
 arch/arm/mach-imx/mx5/Kconfig                        |   7 ++
 arch/arm/mach-imx/mx6/Kconfig                        |  60 ++++++-------
 arch/arm/mach-imx/mx6/soc.c                          |   2 +-
 arch/arm/mach-imx/mx7/soc.c                          |   2 +-
 board/dhelectronics/dh_imx6/dh_imx6_spl.c            |  40 ++++-----
 board/engicam/common/board.c                         |  24 ++++++
 board/engicam/common/board.h                         |   1 -
 board/engicam/common/spl.c                           |  42 +++++++++
 board/engicam/geam6ul/MAINTAINERS                    |   8 --
 board/engicam/geam6ul/README                         |  28 ------
 board/engicam/icorem6_rqs/Kconfig                    |  12 ---
 board/engicam/icorem6_rqs/MAINTAINERS                |   9 --
 board/engicam/icorem6_rqs/Makefile                   |   6 --
 board/engicam/icorem6_rqs/icorem6_rqs.c              | 124
+--------------------------
 board/engicam/{geam6ul => imx6q}/Kconfig             |   4 +-
 board/engicam/{icorem6 => imx6q}/MAINTAINERS         |   8 +-
 board/engicam/{geam6ul => imx6q}/Makefile            |   2 +-
 board/engicam/{icorem6_rqs => imx6q}/README          |   9 +-
 board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c}   |  98
++-------------------
 board/engicam/{icorem6 => imx6ul}/Kconfig            |   4 +-
 board/engicam/{isiotmx6ul => imx6ul}/MAINTAINERS     |   9 +-
 board/engicam/{icorem6 => imx6ul}/Makefile           |   2 +-
 board/engicam/{icorem6 => imx6ul}/README             |  11 ++-
 board/engicam/{geam6ul/geam6ul.c => imx6ul/imx6ul.c} |  88
++-----------------
 board/engicam/isiotmx6ul/Kconfig                     |  12 ---
 board/engicam/isiotmx6ul/Makefile                    |   6 --
 board/engicam/isiotmx6ul/README                      |  28 ------
 board/engicam/isiotmx6ul/isiotmx6ul.c                | 241
---------------------------------------------------
 board/ge/bx50v3/Makefile                             |   2 +-
 board/ge/bx50v3/bx50v3.c                             |   2 +-
 board/ge/bx50v3/vpd_reader.c                         | 228
------------------------------------------------
 board/ge/common/Makefile                             |   7 ++
 board/ge/common/vpd_reader.c                         | 197
++++++++++++++++++++++++++++++++++++++++++
 board/ge/{bx50v3 => common}/vpd_reader.h             |  14 +--
 board/ge/mx53ppd/Kconfig                             |  17 ++++
 board/ge/mx53ppd/MAINTAINERS                         |   7 ++
 board/ge/mx53ppd/Makefile                            |  12 +++
 board/ge/mx53ppd/imximage.cfg                        |  87
+++++++++++++++++++
 board/ge/mx53ppd/mx53ppd.c                           | 457
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/ge/mx53ppd/mx53ppd_video.c                     | 135
+++++++++++++++++++++++++++++
 board/ge/mx53ppd/ppd_gpio.h                          |  96
+++++++++++++++++++++
 board/wandboard/spl.c                                |   2 +
 configs/cgtqmx6eval_defconfig                        |   2 +-
 configs/cm_fx6_defconfig                             |   2 +-
 configs/dh_imx6_defconfig                            |   2 +-
 configs/gwventana_emmc_defconfig                     |   2 +-
 configs/gwventana_gw5904_defconfig                   |   2 +-
 configs/gwventana_nand_defconfig                     |   2 +-
 configs/imx6qdl_icore_mmc_defconfig                  |   3 +-
 configs/imx6qdl_icore_nand_defconfig                 |   2 +-
 configs/imx6qdl_icore_rqs_defconfig                  |   4 +-
 configs/imx6ul_geam_mmc_defconfig                    |   3 +-
 configs/imx6ul_geam_nand_defconfig                   |   2 +-
 configs/imx6ul_isiot_emmc_defconfig                  |   3 +-
 configs/imx6ul_isiot_mmc_defconfig                   |   3 +-
 configs/imx6ul_isiot_nand_defconfig                  |   2 +-
 configs/mccmon6_nor_defconfig                        |   2 +-
 configs/mccmon6_sd_defconfig                         |   2 +-
 configs/mx53ppd_defconfig                            |  39 +++++++++
 configs/mx6cuboxi_defconfig                          |   2 +-
 configs/mx6sabreauto_defconfig                       |   2 +-
 configs/mx6sabresd_defconfig                         |   2 +-
 configs/mx6sxsabresd_defconfig                       |   1 +
 configs/pfla02_defconfig                             |   2 +-
 configs/pico-imx6ul_defconfig                        |   2 +
 configs/udoo_defconfig                               |   2 +-
 configs/wandboard_defconfig                          |   2 +-
 drivers/Kconfig                                      |   2 +
 drivers/bootcount/Kconfig                            |  58 +++++++++++++
 drivers/bootcount/Makefile                           |   1 +
 drivers/bootcount/bootcount_ext.c                    |  62 ++++++++++++++
 drivers/i2c/mxc_i2c.c                                |  25 +++---
 drivers/pinctrl/nxp/pinctrl-imx6.c                   |   7 +-
 drivers/pwm/pwm-imx-util.c                           |   2 +
 drivers/rtc/Kconfig                                  |   6 ++
 drivers/rtc/Makefile                                 |   1 +
 drivers/rtc/s35392a.c                                | 365
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 fs/ext4/ext4_common.c                                |  10 +++
 fs/ext4/ext4fs.c                                     |  10 ++-
 include/configs/imx6-engicam.h                       |  11 ---
 include/configs/mx53ppd.h                            | 248
+++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/configs/mx6sxsabresd.h                       |   5 +-
 include/configs/pico-imx6ul.h                        |  23 +++--
 lib/Kconfig                                          |   3 +
 97 files changed, 2163 insertions(+), 1027 deletions(-)
 delete mode 100644 board/engicam/geam6ul/MAINTAINERS
 delete mode 100644 board/engicam/geam6ul/README
 delete mode 100644 board/engicam/icorem6_rqs/Kconfig
 delete mode 100644 board/engicam/icorem6_rqs/MAINTAINERS
 delete mode 100644 board/engicam/icorem6_rqs/Makefile
 rename board/engicam/{geam6ul => imx6q}/Kconfig (73%)
 rename board/engicam/{icorem6 => imx6q}/MAINTAINERS (58%)
 rename board/engicam/{geam6ul => imx6q}/Makefile (80%)
 rename board/engicam/{icorem6_rqs => imx6q}/README (71%)
 rename board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c} (72%)
 rename board/engicam/{icorem6 => imx6ul}/Kconfig (72%)
 rename board/engicam/{isiotmx6ul => imx6ul}/MAINTAINERS (69%)
 rename board/engicam/{icorem6 => imx6ul}/Makefile (80%)
 rename board/engicam/{icorem6 => imx6ul}/README (74%)
 rename board/engicam/{geam6ul/geam6ul.c => imx6ul/imx6ul.c} (59%)
 delete mode 100644 board/engicam/isiotmx6ul/Kconfig
 delete mode 100644 board/engicam/isiotmx6ul/Makefile
 delete mode 100644 board/engicam/isiotmx6ul/README
 delete mode 100644 board/engicam/isiotmx6ul/isiotmx6ul.c
 delete mode 100644 board/ge/bx50v3/vpd_reader.c
 create mode 100644 board/ge/common/Makefile
 create mode 100644 board/ge/common/vpd_reader.c
 rename board/ge/{bx50v3 => common}/vpd_reader.h (58%)
 create mode 100644 board/ge/mx53ppd/Kconfig
 create mode 100644 board/ge/mx53ppd/MAINTAINERS
 create mode 100644 board/ge/mx53ppd/Makefile
 create mode 100644 board/ge/mx53ppd/imximage.cfg
 create mode 100644 board/ge/mx53ppd/mx53ppd.c
 create mode 100644 board/ge/mx53ppd/mx53ppd_video.c
 create mode 100644 board/ge/mx53ppd/ppd_gpio.h
 create mode 100644 configs/mx53ppd_defconfig
 create mode 100644 drivers/bootcount/Kconfig
 create mode 100644 drivers/bootcount/bootcount_ext.c
 create mode 100644 drivers/rtc/s35392a.c
 create mode 100644 include/configs/mx53ppd.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-11-09 10:35 Stefano Babic
@ 2017-11-10  3:20 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-11-10  3:20 UTC (permalink / raw)
  To: u-boot

On Thu, Nov 09, 2017 at 11:35:56AM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> some fixes for 2017.11. Please pull from u-boot-imx, thanks !
> 
> 
> The following changes since commit 7a69604bce9a9a9476753af64e5a1870880c1333:
> 
>   Prepare v2017.11-rc4 (2017-11-06 18:25:37 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 9c8979cdb76dd65bb0983eb4cb1a895be0f0b1dc:
> 
>   imx7: Add include guards for include/asm/arch-mx7/sys_proto.h file
> (2017-11-09 11:32:49 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171109/5167d222/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-11-09 10:35 Stefano Babic
  2017-11-10  3:20 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-11-09 10:35 UTC (permalink / raw)
  To: u-boot

Hi Tom,

some fixes for 2017.11. Please pull from u-boot-imx, thanks !


The following changes since commit 7a69604bce9a9a9476753af64e5a1870880c1333:

  Prepare v2017.11-rc4 (2017-11-06 18:25:37 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 9c8979cdb76dd65bb0983eb4cb1a895be0f0b1dc:

  imx7: Add include guards for include/asm/arch-mx7/sys_proto.h file
(2017-11-09 11:32:49 +0100)

----------------------------------------------------------------
Benoît Thébaudeau (1):
      mmc: fsl_esdhc: Fix PIO timeout
Fabio Estevam (3):
      mx25: Move MX25 selection to Kconfig
      mx25: Select the ESDHC_A001 erratum
      mx51: Select the ESDHC_A001 erratum

Jagan Teki (1):
      i.MX6: engicam: Fix MAINTAINERS/README

Lukasz Majewski (6):
      board: imx6: marsboard: Remove doubled #include <asm/arch/sys_proto.h>
      imx6: iomux: Add generic function to set RGMII IO voltage on IMX6 SoCs
      imx:display5: Add support for LWN's DISPLAY5 board
      imx6: Add include guards for include/asm/arch-mx6/sys_proto.h file
      imx5: Add include guards for include/asm/arch-mx5/sys_proto.h file
      imx7: Add include guards for include/asm/arch-mx7/sys_proto.h file

 arch/arm/Kconfig                          |  19 ++--
 arch/arm/dts/imx6q-display5.dts           |  18 ++++
 arch/arm/include/asm/arch-mx5/sys_proto.h |   4 +
 arch/arm/include/asm/arch-mx6/iomux.h     |  13 +++
 arch/arm/include/asm/arch-mx6/sys_proto.h |  16 ++++
 arch/arm/include/asm/arch-mx7/sys_proto.h |   4 +
 arch/arm/mach-imx/mx2/Kconfig             |  30 ++++++
 arch/arm/mach-imx/mx5/Kconfig             |   2 +-
 arch/arm/mach-imx/mx6/Kconfig             |   7 ++
 board/embest/mx6boards/mx6boards.c        |   2 +-
 board/engicam/geam6ul/MAINTAINERS         |   2 +-
 board/engicam/icorem6/MAINTAINERS         |   2 +-
 board/engicam/icorem6/README              |   7 +-
 board/engicam/icorem6_rqs/MAINTAINERS     |   2 +-
 board/engicam/icorem6_rqs/README          |   7 +-
 board/engicam/isiotmx6ul/MAINTAINERS      |   2 +-
 board/liebherr/display5/Kconfig           |  18 ++++
 board/liebherr/display5/MAINTAINERS       |   7 ++
 board/liebherr/display5/Makefile          |  11 +++
 board/liebherr/display5/common.c          | 111 ++++++++++++++++++++++
 board/liebherr/display5/common.h          |  42 +++++++++
 board/liebherr/display5/display5.c        | 384
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/liebherr/display5/spl.c             | 247
+++++++++++++++++++++++++++++++++++++++++++++++++
 configs/display5_defconfig                |  62 +++++++++++++
 configs/display5_factory_defconfig        |  76 +++++++++++++++
 configs/mx25pdk_defconfig                 |   1 +
 configs/zmx25_defconfig                   |   1 +
 drivers/mmc/fsl_esdhc.c                   |  26 +++---
 include/configs/display5.h                | 408
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/configs/mx25pdk.h                 |   1 -
 include/configs/zmx25.h                   |   1 -
 include/fsl_esdhc.h                       |   2 +-
 32 files changed, 1490 insertions(+), 45 deletions(-)
 create mode 100644 arch/arm/dts/imx6q-display5.dts
 create mode 100644 arch/arm/mach-imx/mx2/Kconfig
 create mode 100644 board/liebherr/display5/Kconfig
 create mode 100644 board/liebherr/display5/MAINTAINERS
 create mode 100644 board/liebherr/display5/Makefile
 create mode 100644 board/liebherr/display5/common.c
 create mode 100644 board/liebherr/display5/common.h
 create mode 100644 board/liebherr/display5/display5.c
 create mode 100644 board/liebherr/display5/spl.c
 create mode 100644 configs/display5_defconfig
 create mode 100644 configs/display5_factory_defconfig
 create mode 100644 include/configs/display5.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-10-31 10:53 Stefano Babic
@ 2017-11-01  1:26 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-11-01  1:26 UTC (permalink / raw)
  To: u-boot

On Tue, Oct 31, 2017 at 11:53:03AM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull these fixes from u-boot-imx, thanks !
> 
> The following changes since commit b79372ae94fbc9e30d014ad8ce830d2062539eb9:
> 
>   scripts/get_maintainer.pl: enable find_maintainer_files (2017-10-29
> 10:13:10 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 40b0dae15159bf14f24cf7714ddd690ae3ca65e3:
> 
>   mx6slevk: Call gpio_request() (2017-10-31 11:35:01 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171031/dc9141a0/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-10-31 10:53 Stefano Babic
  2017-11-01  1:26 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-10-31 10:53 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull these fixes from u-boot-imx, thanks !

The following changes since commit b79372ae94fbc9e30d014ad8ce830d2062539eb9:

  scripts/get_maintainer.pl: enable find_maintainer_files (2017-10-29
10:13:10 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 40b0dae15159bf14f24cf7714ddd690ae3ca65e3:

  mx6slevk: Call gpio_request() (2017-10-31 11:35:01 +0100)

----------------------------------------------------------------
Fabio Estevam (7):
      imx: Fix regression with CONFIG_DM_MMC=y
      net: fec_mxc: Change "error frame" message to debug level
      wandboard: Add support for the MX6QP variant
      mx6slevk: Fix MMC breakage for the SPL target
      wandboard: Remove cpu type check prior to setup_sata()
      udoo: Remove cpu type check prior to setup_sata()
      mx6slevk: Call gpio_request()

Marek Vasut (1):
      ARM: imx6: Enable UMS and DFU on DHCOM i.MX6 PDK

Peng Fan (1):
      imx: mx6slevk: cleanup board usb code

Stefan Agner (1):
      configs: vf610: increase maximum size and enforce correct limit

 arch/arm/include/asm/arch-mx6/imx-regs.h  |   3 ++
 board/dhelectronics/dh_imx6/dh_imx6.c     |  10 ++-----
 board/freescale/mx6slevk/mx6slevk.c       |  52
++-------------------------------
 board/udoo/udoo.c                         |   3 +-
 board/wandboard/spl.c                     | 125
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 board/wandboard/wandboard.c               |  10 +++----
 configs/dh_imx6_defconfig                 |   8 +++++
 configs/imx6q_logic_defconfig             |   1 -
 configs/imx6qdl_icore_nand_defconfig      |   1 -
 configs/imx6ul_geam_mmc_defconfig         |   1 -
 configs/imx6ul_geam_nand_defconfig        |   1 -
 configs/imx6ul_isiot_emmc_defconfig       |   1 -
 configs/imx6ul_isiot_mmc_defconfig        |   1 -
 configs/imx6ul_isiot_nand_defconfig       |   1 -
 configs/mx6slevk_defconfig                |   2 +-
 configs/mx6slevk_spinor_defconfig         |   2 +-
 configs/mx6slevk_spl_defconfig            |  16 +++++++++-
 configs/mx6sllevk_defconfig               |   1 -
 configs/mx6sllevk_plugin_defconfig        |   1 -
 configs/mx6sxsabreauto_defconfig          |   2 +-
 configs/mx6ull_14x14_evk_defconfig        |   1 -
 configs/mx6ull_14x14_evk_plugin_defconfig |   1 -
 configs/mx7dsabresd_defconfig             |   1 -
 configs/mx7dsabresd_secure_defconfig      |   1 -
 configs/mx7ulp_evk_defconfig              |   1 -
 configs/mx7ulp_evk_plugin_defconfig       |   1 -
 configs/opos6uldev_defconfig              |   1 -
 drivers/net/fec_mxc.c                     |   2 +-
 include/configs/colibri_vf.h              |   4 +--
 include/configs/dh_imx6.h                 |  12 ++++++++
 include/configs/opos6uldev.h              |   1 +
 include/configs/pcm052.h                  |   4 +--
 include/configs/vf610twr.h                |   4 +--
 include/configs/wandboard.h               |   2 ++
 34 files changed, 185 insertions(+), 93 deletions(-)

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-10-12 16:29 Stefano Babic
@ 2017-10-12 22:29 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-10-12 22:29 UTC (permalink / raw)
  To: u-boot

On Thu, Oct 12, 2017 at 06:29:05PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> 
> The following changes since commit 1b22c5ba496ffc9b0702919d58c410ed1527ab63:
> 
>   Merge git://git.denx.de/u-boot-i2c (2017-10-11 08:38:20 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 0a333602df9fd9dcd6f58c8c098b29a3bd1dffcc:
> 
>   ARM: imx6: Add DHCOM i.MX6 PDK board support (2017-10-12 18:01:06 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171012/0c5eaed3/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-10-12 16:29 Stefano Babic
  2017-10-12 22:29 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-10-12 16:29 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !


The following changes since commit 1b22c5ba496ffc9b0702919d58c410ed1527ab63:

  Merge git://git.denx.de/u-boot-i2c (2017-10-11 08:38:20 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 0a333602df9fd9dcd6f58c8c098b29a3bd1dffcc:

  ARM: imx6: Add DHCOM i.MX6 PDK board support (2017-10-12 18:01:06 +0200)

----------------------------------------------------------------
Anatolij Gustschin (2):
      imx6: disable clock command and print_cpuinfo code in SPL
      i.mx6ul: xpress: update UART init for current board revision

Diego Dorta (8):
      imx: Include <input.h> header file
      imx: sys_proto: Add a prototype for board_mmc_get_env_dev()
      mx6: soc: Include <asm/bootm.h> header file
      mx6sabresd: Include <asm/mach-imx/spi.h> header file
      usb: ehci-ci: Add a prototype for board_ehci_power()
      mx6sabresd: Include <usb/ehci-ci.h> header file
      mx6: clock: Add a prototype for do_mx6_showclocks()
      mx6: sys_proto: Add prototypes for imx6_pcie_toggle() functions

Fabio Estevam (13):
      mx6sabresd: Avoid calling setup_display() from SPL code
      cgtqmx6eval: Avoid calling setup_display() from SPL code
      wandboard: Avoid calling setup_display() from SPL code
      mx6cuboxi: Avoid calling setup_display() from SPL code
      apalis_imx6: Avoid calling setup_display() from SPL code
      colibri_imx6: Avoid calling setup_display() from SPL code
      mx53loco: Let CONFIG_DISPLAY_CPUINFO be selected
      README.imx6: Prefer loading SPL via the new SDP mechanism
      mx6: toradex: Remove custom CONFIG_SPL_PAD_TO definition
      mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig
      topic_miami: Remove CONFIG_CMD_BOOTZ undef
      wandboard: Add support for the latest revd1 revision
      mx6slevk: Use PARTUUID to specify the rootfs location

Ilya Ledvich (1):
      arm: imx7d: add support for Compulab cl-som-imx7

Jagan Teki (2):
      icore: configs: Fix merge conflict issue
      icorem6_rqs: env: Return mmc devno

Marek Vasut (1):
      ARM: imx6: Add DHCOM i.MX6 PDK board support

Otavio Salvador (2):
      mx25pdk: Use generic filesystem commands
      mx25pdk: Remove duplicated define

Stefan Agner (1):
      doc: update imx_usb_loader URL

Sven-Ola Tuecke (1):
      drivers: pci: imx: fix imx_pcie_remove function

Uri Mashiach (4):
      imx: mx7: fix the CCM_ macros
      imx: mx7: DDR controller configuration for the i.MX7 architecture
      imx: mx7: SPL support for i.MX7
      imx: mx7: spl: remove redundant SATA definitionas

 arch/arm/include/asm/arch-mx6/clock.h       |   1 +
 arch/arm/include/asm/arch-mx6/sys_proto.h   |   3 +
 arch/arm/include/asm/arch-mx7/crm_regs.h    |  51 +++++----
 arch/arm/include/asm/arch-mx7/imx-regs.h    |   2 +
 arch/arm/include/asm/arch-mx7/mx7-ddr.h     | 155
++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7/sys_proto.h   |   1 +
 arch/arm/include/asm/mach-imx/sys_proto.h   |   2 +
 arch/arm/mach-imx/cpu.c                     |   4 +-
 arch/arm/mach-imx/mx6/Kconfig               |  10 ++
 arch/arm/mach-imx/mx6/clock.c               |  30 ++---
 arch/arm/mach-imx/mx6/soc.c                 |   1 +
 arch/arm/mach-imx/mx7/Kconfig               |   8 ++
 arch/arm/mach-imx/mx7/Makefile              |   2 +-
 arch/arm/mach-imx/mx7/ddr.c                 | 201
+++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/spl.c                     |  23 +++-
 board/advantech/dms-ba16/dms-ba16.c         |   1 +
 board/aristainetos/aristainetos.c           |   1 +
 board/beckhoff/mx53cx9020/mx53cx9020.c      |   1 +
 board/ccv/xpress/xpress.c                   |  14 ++-
 board/compulab/cl-som-imx7/Kconfig          |  28 +++++
 board/compulab/cl-som-imx7/MAINTAINERS      |   6 +
 board/compulab/cl-som-imx7/Makefile         |  17 +++
 board/compulab/cl-som-imx7/cl-som-imx7.c    | 331
++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/compulab/cl-som-imx7/common.c         |  46 ++++++++
 board/compulab/cl-som-imx7/common.h         |  32 ++++++
 board/dhelectronics/dh_imx6/dh_imx6_spl.c   | 399
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/el/el6x/el6x.c                        |   1 +
 board/embest/mx6boards/mx6boards.c          |   1 +
 board/engicam/icorem6_rqs/icorem6_rqs.c     |   3 +-
 board/freescale/mx51evk/mx51evk.c           |   1 +
 board/freescale/mx53loco/mx53loco.c         |   1 +
 board/freescale/mx6sabreauto/mx6sabreauto.c |   1 +
 board/freescale/mx6sabresd/mx6sabresd.c     |   9 +-
 board/ge/bx50v3/bx50v3.c                    |   1 +
 board/logicpd/imx6/imx6logic.c              |   1 +
 board/solidrun/mx6cuboxi/mx6cuboxi.c        |  15 +--
 board/technologic/ts4800/ts4800.c           |   1 +
 board/toradex/apalis_imx6/apalis_imx6.c     |   9 +-
 board/toradex/colibri_imx6/colibri_imx6.c   |   8 +-
 board/wandboard/wandboard.c                 | 113 +++++++++++++++++--
 configs/cl-som-imx7_defconfig               |  54 +++++++++
 configs/dh_imx6_defconfig                   |  51 +++++++++
 configs/imx6qdl_icore_mmc_defconfig         |   1 -
 configs/imx6qdl_icore_rqs_defconfig         |   1 -
 configs/mx25pdk_defconfig                   |   5 +-
 configs/mx53loco_defconfig                  |   1 -
 configs/mx6slevk_defconfig                  |   1 +
 configs/mx6slevk_spl_defconfig              |   1 +
 configs/mx7ulp_evk_defconfig                |   1 +
 configs/wandboard_defconfig                 |   1 +
 doc/README.imx6                             |  32 +-----
 doc/README.sdp                              |   2 +-
 drivers/pci/pcie_imx.c                      |   8 +-
 include/configs/apalis_imx6.h               |   1 -
 include/configs/cl-som-imx7.h               | 192
++++++++++++++++++++++++++++++++
 include/configs/colibri_imx6.h              |   1 -
 include/configs/dh_imx6.h                   | 191
++++++++++++++++++++++++++++++++
 include/configs/imx7_spl.h                  |  61 ++++++++++
 include/configs/mx25pdk.h                   |  11 +-
 include/configs/mx6slevk.h                  |   5 +-
 include/configs/mx7ulp_evk.h                |   1 -
 include/configs/topic_miami.h               |   1 -
 include/configs/wandboard.h                 |  11 ++
 include/configs/xpress.h                    |   4 +-
 include/usb/ehci-ci.h                       |   1 +
 72 files changed, 2873 insertions(+), 126 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-mx7/mx7-ddr.h
 create mode 100644 arch/arm/mach-imx/mx7/ddr.c
 create mode 100644 board/compulab/cl-som-imx7/Kconfig
 create mode 100644 board/compulab/cl-som-imx7/MAINTAINERS
 create mode 100644 board/compulab/cl-som-imx7/Makefile
 create mode 100644 board/compulab/cl-som-imx7/cl-som-imx7.c
 create mode 100644 board/compulab/cl-som-imx7/common.c
 create mode 100644 board/compulab/cl-som-imx7/common.h
 create mode 100644 board/compulab/cl-som-imx7/mux.c
 create mode 100644 board/compulab/cl-som-imx7/spl.c
 create mode 100644 board/dhelectronics/dh_imx6/Kconfig
 create mode 100644 board/dhelectronics/dh_imx6/MAINTAINERS
 create mode 100644 board/dhelectronics/dh_imx6/Makefile
 create mode 100644 board/dhelectronics/dh_imx6/dh_imx6.c
 create mode 100644 board/dhelectronics/dh_imx6/dh_imx6_spl.c
 create mode 100644 configs/cl-som-imx7_defconfig
 create mode 100644 configs/dh_imx6_defconfig
 create mode 100644 include/configs/cl-som-imx7.h
 create mode 100644 include/configs/dh_imx6.h
 create mode 100644 include/configs/imx7_spl.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-09-20 13:47 Stefano Babic
@ 2017-09-21  2:18 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-09-21  2:18 UTC (permalink / raw)
  To: u-boot

On Wed, Sep 20, 2017 at 03:47:53PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 08cebeeaadd9192dd501308ac6a8b858ffa255c1:
> 
>   Merge git://git.denx.de/u-boot-fdt (2017-09-15 22:34:34 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 031426a7af63d3c939fc963311e6dc8e904a0440:
> 
>   mx6sabresd: Add Serial Download Protocol support (2017-09-20 15:34:59
> +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170920/a8c796b8/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-09-20 13:47 Stefano Babic
  2017-09-21  2:18 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-09-20 13:47 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 08cebeeaadd9192dd501308ac6a8b858ffa255c1:

  Merge git://git.denx.de/u-boot-fdt (2017-09-15 22:34:34 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 031426a7af63d3c939fc963311e6dc8e904a0440:

  mx6sabresd: Add Serial Download Protocol support (2017-09-20 15:34:59
+0200)

----------------------------------------------------------------
Anatolij Gustschin (1):
      imx6: drop duplicated bss memset and board_init_r() call

Dennis Gilmore (1):
      detect and setup solidrun hummingboard2

Eric Nelson (1):
      imx: imx7d: remove CamelCase from ENET_xMHz macros

Fabio Estevam (2):
      toradex: imx6: Move g_dnl_bind_fixup() into common SPL code
      mx6sabresd: Add Serial Download Protocol support

Ian Ray (1):
      board: ge: bx50v3: set eth0 MAC address

Stefan Agner (2):
      imx: add macro to detect whether USB PHY is active
      imx_common: detect USB serial downloader reliably

Vanessa Maegima (1):
      pico-imx7d: Add "how to boot with NXP 4.1 Kernel"

 arch/arm/include/asm/arch-mx6/sys_proto.h   |   7 ++++++
 arch/arm/include/asm/arch-mx7/clock.h       |   6 ++---
 arch/arm/mach-imx/mx7/clock.c               |   6 ++---
 arch/arm/mach-imx/spl.c                     |  22 +++++++++++++++++
 board/bachmann/ot1200/ot1200_spl.c          |   6 -----
 board/compulab/cm_fx6/spl.c                 |   3 ---
 board/engicam/common/spl.c                  |   6 -----
 board/freescale/mx7dsabresd/mx7dsabresd.c   |   2 +-
 board/gateworks/gw_ventana/gw_ventana_spl.c |   3 ---
 board/ge/bx50v3/Makefile                    |   2 +-
 board/ge/bx50v3/bx50v3.c                    | 109
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/ge/bx50v3/vpd_reader.c                | 228
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/ge/bx50v3/vpd_reader.h                |  25 +++++++++++++++++++
 board/kosagi/novena/novena_spl.c            |   6 -----
 board/liebherr/mccmon6/spl.c                |   6 -----
 board/solidrun/mx6cuboxi/mx6cuboxi.c        |  35
++++++++++++++++++++++++--
 board/technexion/pico-imx7d/README          |  17 +++++++++++++
 board/technexion/pico-imx7d/pico-imx7d.c    |   2 +-
 board/toradex/apalis_imx6/apalis_imx6.c     |  13 ----------
 board/toradex/colibri_imx6/colibri_imx6.c   |  13 ----------
 board/toradex/colibri_imx7/colibri_imx7.c   |   2 +-
 board/udoo/udoo_spl.c                       |   6 -----
 board/wandboard/spl.c                       |   6 -----
 configs/mx6sabresd_defconfig                |   4 +++
 include/configs/ge_bx50v3.h                 |  15 +++++++++++
 include/configs/mx6cuboxi.h                 |   4 +++
 26 files changed, 474 insertions(+), 80 deletions(-)
 create mode 100644 board/ge/bx50v3/vpd_reader.c
 create mode 100644 board/ge/bx50v3/vpd_reader.h


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-08-30 10:35 Stefano Babic
@ 2017-09-01 16:42 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-09-01 16:42 UTC (permalink / raw)
  To: u-boot

On Wed, Aug 30, 2017 at 12:35:02PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 90ae53ce1ae665a1b43ecf5ccafc339839392427:
> 
>   fastboot: Ensure we treat CONFIG_FASTBOOT_BUF_ADDR as long (2017-08-22
> 08:20:02 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 63af4b0ad0666e0797306593813b6272e1995bde:
> 
>   i.MX6Q: icorem6: Add falcon mode (2017-08-30 12:18:41 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170901/4f5ba6c8/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-08-30 10:35 Stefano Babic
  2017-09-01 16:42 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-08-30 10:35 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 90ae53ce1ae665a1b43ecf5ccafc339839392427:

  fastboot: Ensure we treat CONFIG_FASTBOOT_BUF_ADDR as long (2017-08-22
08:20:02 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 63af4b0ad0666e0797306593813b6272e1995bde:

  i.MX6Q: icorem6: Add falcon mode (2017-08-30 12:18:41 +0200)

----------------------------------------------------------------
Anatolij Gustschin (3):
      imx: timer: don't clear the GPT control register multiple times
      spl: do not repeat timer init on i.MX6
      imx6: don't include unneeded boot_mode array in SPL

Breno Lima (1):
      imx: imx6: Move gpr_init() function to soc.c

Jagan Teki (3):
      icorem6: Fix to find MMC devices
      i.MX6Q: spl: Fix falcon to use dram_init_banksize
      i.MX6Q: icorem6: Add falcon mode

Peng Fan (3):
      imx: mx7: psci: add copyright and license
      pinctrl: imx: Fix mask when SHARE_MUX_CONF_REG is set
      pinctrl: imx7ulp: Add new info instance for iomuxc1

Stefan Agner (11):
      imx: move imximage header to common location
      usb: gadget: add SDP driver
      usb: gadget: sdp: extend images compatible for jumps
      cmd: add sdp command
      spl: add serial download protocol (SDP) support
      doc: add Serial Download Protocol documentation
      apalis/colibri_imx6: use independent USB PID for SPL
      apalis/colibri_imx6: enable SDP by default
      imx: fix USB boot mode detection for i.MX 6UL and 6ULL
      imx: use BOOT_DEVICE_BOARD instead of UART
      imx: remove SATA boot mode for i.MX 6UL and 6ULL

Stefano Babic (2):
      imx: fix licensing in i.MX files
      pfla02: Fix RAM detection and support 1 bank SOM

 arch/arm/include/asm/arch-mx35/mmc_host_def.h |  18 +---
 arch/arm/include/asm/arch-mx5/iomux-mx51.h    |   7 +-
 arch/arm/include/asm/arch-mxs/iomux-mx23.h    |   7 +-
 arch/arm/include/asm/arch-mxs/iomux-mx28.h    |   7 +-
 arch/arm/include/asm/mach-imx/sys_proto.h     |   9 +-
 arch/arm/mach-imx/mx6/soc.c                   |  19 ++++
 arch/arm/mach-imx/mx7/psci-mx7.c              |   7 ++
 arch/arm/mach-imx/mx7/psci.S                  |   7 ++
 arch/arm/mach-imx/spl.c                       |  20 +++-
 arch/arm/mach-imx/timer.c                     |   3 +-
 board/bachmann/ot1200/ot1200.c                |  11 --
 board/barco/platinum/platinum.h               |  11 --
 board/congatec/cgtqmx6eval/cgtqmx6eval.c      |  11 --
 board/el/el6x/el6x.c                          |  11 --
 board/engicam/common/spl.c                    |  22 ++--
 board/freescale/mx6sabreauto/mx6sabreauto.c   |  17 ---
 board/freescale/mx6sabresd/mx6sabresd.c       |  17 ---
 board/gateworks/gw_ventana/gw_ventana_spl.c   |  11 --
 board/kosagi/novena/novena_spl.c              |  11 --
 board/liebherr/mccmon6/spl.c                  |  11 --
 board/phytec/pcm058/pcm058.c                  |  12 ---
 board/phytec/pfla02/Kconfig                   |   6 ++
 board/phytec/pfla02/pfla02.c                  |  98 ++++++++++--------
 board/solidrun/mx6cuboxi/mx6cuboxi.c          |  11 --
 board/toradex/apalis_imx6/apalis_imx6.c       |  24 +++--
 board/toradex/colibri_imx6/colibri_imx6.c     |  24 +++--
 board/udoo/udoo_spl.c                         |  11 --
 board/wandboard/spl.c                         |  11 --
 cmd/Kconfig                                   |   7 ++
 cmd/Makefile                                  |   1 +
 cmd/usb_gadget_sdp.c                          |  50 +++++++++
 common/spl/Kconfig                            |   6 ++
 common/spl/Makefile                           |   1 +
 common/spl/spl.c                              |   2 +-
 common/spl/spl_sdp.c                          |  37 +++++++
 configs/apalis_imx6_defconfig                 |   4 +
 configs/colibri_imx6_defconfig                |   4 +
 configs/imx6qdl_icore_mmc_defconfig           |   2 +-
 configs/imx6qdl_icore_rqs_defconfig           |   1 -
 doc/README.sdp                                | 100 ++++++++++++++++++
 drivers/pinctrl/nxp/pinctrl-imx.c             |   2 +-
 drivers/pinctrl/nxp/pinctrl-imx7ulp.c         |  10 +-
 drivers/usb/gadget/Kconfig                    |   7 ++
 drivers/usb/gadget/Makefile                   |   2 +
 drivers/usb/gadget/f_sdp.c                    | 737
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/configs/imx6-engicam.h                |  14 +++
 {tools => include}/imximage.h                 |   0
 include/sdp.h                                 |  16 +++
 48 files changed, 1156 insertions(+), 281 deletions(-)
 create mode 100644 cmd/usb_gadget_sdp.c
 create mode 100644 common/spl/spl_sdp.c
 create mode 100644 doc/README.sdp
 create mode 100644 drivers/usb/gadget/f_sdp.c
 rename {tools => include}/imximage.h (100%)
 create mode 100644 include/sdp.h


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-08-16 11:18 Stefano Babic
@ 2017-08-17  1:17 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-08-17  1:17 UTC (permalink / raw)
  To: u-boot

On Wed, Aug 16, 2017 at 01:18:40PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit f19955a01482d118eac0fdaf530ec6e5b08cf414:
> 
>   Merge git://git.denx.de/u-boot-uniphier (2017-07-26 11:29:25 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to e872f27a020f353dd334fc025999466adf5ae18c:
> 
>   imx: mx7: fix build warning when CONFIG_IMX_RDC not enabled
> (2017-08-16 12:43:09 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170816/63ba957c/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-08-16 11:18 Stefano Babic
  2017-08-17  1:17 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-08-16 11:18 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit f19955a01482d118eac0fdaf530ec6e5b08cf414:

  Merge git://git.denx.de/u-boot-uniphier (2017-07-26 11:29:25 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to e872f27a020f353dd334fc025999466adf5ae18c:

  imx: mx7: fix build warning when CONFIG_IMX_RDC not enabled
(2017-08-16 12:43:09 +0200)

----------------------------------------------------------------
Anatolij Gustschin (2):
      imx6: use SION macro in SDn_CMD mux mode bitfield arguments
      imx6: clock: correct comment for PLL_VIDEO

Breno Lima (2):
      mx6sabresd: Fix IOMUXC_GPR6 and IOMUXC_GPR7 values
      mx6sabreauto: Fix IOMUXC_GPR6 and IOMUXC_GPR7 values

Lothar Waßmann (1):
      net: fec_mxc: adjust prototype of fec_get_miibus() for DM_ETH

Peng Fan (7):
      ARM: i.MX6: exclude the ARM errata from i.MX6 UP system
      arm: Implement workaround for Cortex-A9 errata 845369
      imx: mx6: select ARM_ERRATA_845369
      imx: mx6: soc: fix mx6sll settings
      imx: mx6sx: select OSC as uart's clk parent
      imx: mx6sl: simplify code using setbits_le32
      imx: mx7: fix build warning when CONFIG_IMX_RDC not enabled

Stefano Babic (1):
      mx6: Add support for Phytec pfla02 (NAND)

Sébastien Szymanski (2):
      imx: imx6ul: correct get_cpu_speed_grade_hz on 696MHz SoCs
      imx: imx6ull: correct get_cpu_speed_grade_hz

Vagrant Cascadian (1):
      arm: imx: Enable booting from SATA on wandboard.

 arch/arm/Kconfig                            |   3 +
 arch/arm/cpu/armv7/start.S                  |   6 +
 arch/arm/include/asm/arch-mx6/mx6q_pins.h   |   8 +-
 arch/arm/mach-imx/mx6/Kconfig               |  22 +++-
 arch/arm/mach-imx/mx6/clock.c               |   2 +-
 arch/arm/mach-imx/mx6/soc.c                 |  55 ++++++----
 arch/arm/mach-imx/mx7/soc.c                 |   7 +-
 board/freescale/mx6sabreauto/mx6sabreauto.c |   4 +-
 board/freescale/mx6sabresd/mx6sabresd.c     |   4 +-
 board/phytec/pfla02/Kconfig                 |  12 ++
 board/phytec/pfla02/MAINTAINERS             |   6 +
 board/phytec/pfla02/Makefile                |   9 ++
 board/phytec/pfla02/README                  |  24 ++++
 board/phytec/pfla02/pfla02.c                | 698
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 configs/pfla02_defconfig                    |  50 +++++++++
 drivers/net/fec_mxc.c                       |   9 ++
 include/configs/pfla02.h                    | 179
++++++++++++++++++++++++++++++
 include/configs/wandboard.h                 |   1 +
 include/netdev.h                            |   5 +
 19 files changed, 1069 insertions(+), 35 deletions(-)
 create mode 100644 board/phytec/pfla02/Kconfig
 create mode 100644 board/phytec/pfla02/MAINTAINERS
 create mode 100644 board/phytec/pfla02/Makefile
 create mode 100644 board/phytec/pfla02/README
 create mode 100644 board/phytec/pfla02/pfla02.c
 create mode 100644 configs/pfla02_defconfig
 create mode 100644 include/configs/pfla02.h


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-07-14 15:46 Stefano Babic
@ 2017-07-18 22:49 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-07-18 22:49 UTC (permalink / raw)
  To: u-boot

On Fri, Jul 14, 2017 at 05:46:02PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> All boards compile clean, there are still warning for 9 boards dur to
> fec_get_miibus. Patch was already sent by Lothar and will follow the
> normal way through Joe's tree. At the moment, it is ok to still have
> these warnings.

OK, but we better get them resolved sooner rather than later.

> 
> The following changes since commit 8d3a25685e4aac7070365a2b3c53c2c81b27930f:
> 
>   Merge git://git.denx.de/u-boot-dm (2017-07-11 20:28:46 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 651782a08b5bb4e710bda1b11fff774b8ade384f:
> 
>   mx6cuboxi: Move CONFIG_CMD_SATA to Kconfig (2017-07-14 15:16:01 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170718/d2b33f68/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-07-14 15:46 Stefano Babic
  2017-07-18 22:49 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-07-14 15:46 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

All boards compile clean, there are still warning for 9 boards dur to
fec_get_miibus. Patch was already sent by Lothar and will follow the
normal way through Joe's tree. At the moment, it is ok to still have
these warnings.


The following changes since commit 8d3a25685e4aac7070365a2b3c53c2c81b27930f:

  Merge git://git.denx.de/u-boot-dm (2017-07-11 20:28:46 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 651782a08b5bb4e710bda1b11fff774b8ade384f:

  mx6cuboxi: Move CONFIG_CMD_SATA to Kconfig (2017-07-14 15:16:01 +0200)

----------------------------------------------------------------
Christian Gmeiner (1):
      ot1200: enable CONFIG_IMX_THERMAL for detailed thermal information

Diego Dorta (1):
      mx6sabreauto: Add Falcon mode support

Fabio Berton (3):
      wandboard: Use PARTUUID to specify the rootfs location
      mx6cuboxi: Use PARTUUID to specify the rootfs location
      embestmx6boards: Use PARTUUID to specify the rootfs location

Fabio Estevam (12):
      mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
      mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
      cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
      cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
      wandboard: Remove unnecessary delay
      mx6sabresd: Fix guard file symbol
      mx6: soc: Move mxs_dma_init() into the mxs nand driver
      mx6sabreauto: Do not enable WEIM by default
      mx6sabre: Use PARTUUID to specify the rootfs location
      warp: Use PARTUUID to specify the rootfs location
      mx6sabreauto: Make Ethernet functional again
      mx6cuboxi: Move CONFIG_CMD_SATA to Kconfig

Florian Fainelli (1):
      dt-bindings: Document the Broadcom STB wake-up timer node

Gautam Bhat (1):
      mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.

Jagan Teki (9):
      serial: mxc: Add common mxc_uart reg space
      serial: mxc: Use RFDIV in dm-code
      serial: mxc: Move cr1 and cr2 write to mxc_serial_setbrg
      serial: mxc: Move common init into _mxc_serial_init
      serial: mxc: Move common baud gen into _mxc_serial_setbrg
      serial: mxc: Code cleanup
      serial: mxc: Add debug uart support
      icorem6_rqs: Rename icorem6_rqs config file
      imx6_spl: Add u-boot-dtb.img for SPL payload

Lothar Waßmann (1):
      net: fec_mxc: fix PHY initialization bug with CONFIG_DM_ETH

Patrick Bruenn (2):
      imx: cx9020: use fdt_addr_r and ramdisk_addr_r
      imx: cx9020: try pxe boot, if no vmlinuz on mmc

Peng Fan (4):
      mmc: fsl_esdhc: correct type of wp_enable
      mmc: fsl_esdhc: introduce vs18_enable for 1.8V fix I/O
      dm: mmc: fsl_esdhc: handle vqmmc supply
      mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT

Peter Robinson (1):
      mx6cuboxi: Add support for sata

Stefan Agner (1):
      imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL

Stefano Babic (1):
      imx: reorganize IMX code as other SOCs

Vanessa Maegima (2):
      mx6qsabreauto: Add SPL support
      mx6sabreauto: Update to SPL only mode

 Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
 |   22 ++++
 MAINTAINERS
 |    4 +-
 Makefile
 |    6 +-
 arch/arm/Kconfig
 |   10 +-
 arch/arm/Makefile
 |    4 +-
 arch/arm/cpu/arm926ejs/mx27/generic.c
 |    2 +-
 arch/arm/cpu/arm926ejs/mxs/mxs.c
 |    2 +-
 arch/arm/cpu/armv7/Makefile
 |    4 -
 arch/arm/cpu/armv7/vf610/generic.c
 |    2 +-
 arch/arm/include/asm/arch-mx25/gpio.h
 |    2 +-
 arch/arm/include/asm/arch-mx25/iomux-mx25.h
 |    2 +-
 arch/arm/include/asm/arch-mx31/gpio.h
 |    2 +-
 arch/arm/include/asm/arch-mx31/sys_proto.h
 |    2 +-
 arch/arm/include/asm/arch-mx35/gpio.h
 |    2 +-
 arch/arm/include/asm/arch-mx35/iomux-mx35.h
 |    2 +-
 arch/arm/include/asm/arch-mx35/sys_proto.h
 |    2 +-
 arch/arm/include/asm/arch-mx5/gpio.h
 |    2 +-
 arch/arm/include/asm/arch-mx5/iomux-mx51.h
 |    2 +-
 arch/arm/include/asm/arch-mx5/iomux-mx53.h
 |    2 +-
 arch/arm/include/asm/arch-mx5/sys_proto.h
 |    2 +-
 arch/arm/include/asm/arch-mx6/gpio.h
 |    2 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h
 |    2 +-
 arch/arm/include/asm/arch-mx6/mx6-pins.h
 |    2 +-
 arch/arm/include/asm/arch-mx6/mx6sl_pins.h
 |    2 +-
 arch/arm/include/asm/arch-mx6/mx6sll_pins.h
 |    2 +-
 arch/arm/include/asm/arch-mx6/mx6sx_pins.h
 |    2 +-
 arch/arm/include/asm/arch-mx6/mx6ul_pins.h
 |    2 +-
 arch/arm/include/asm/arch-mx6/mx6ull_pins.h
 |    2 +-
 arch/arm/include/asm/arch-mx6/sys_proto.h
 |    2 +-
 arch/arm/include/asm/arch-mx7/gpio.h
 |    2 +-
 arch/arm/include/asm/arch-mx7/imx-regs.h
 |    2 +-
 arch/arm/include/asm/arch-mx7/mx7-pins.h
 |    2 +-
 arch/arm/include/asm/arch-mx7/mx7d_pins.h
 |    2 +-
 arch/arm/include/asm/arch-mx7/sys_proto.h
 |    2 +-
 arch/arm/include/asm/arch-mx7ulp/sys_proto.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/imx-regs.h
 |    8 +-
 arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/regs-digctl.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/regs-i2c.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/regs-lradc.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/regs-ocotp.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/regs-pinctrl.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/regs-power-mx23.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/regs-power-mx28.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/regs-rtc.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/regs-ssp.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/regs-timrot.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/regs-uartapp.h
 |    2 +-
 arch/arm/include/asm/arch-mxs/sys_proto.h
 |    2 +-
 arch/arm/include/asm/arch-vf610/iomux-vf610.h
 |    2 +-
 arch/arm/include/asm/{imx-common => mach-imx}/boot_mode.h
 |    0
 arch/arm/include/asm/{imx-common => mach-imx}/dma.h
 |    0
 arch/arm/include/asm/{imx-common => mach-imx}/gpio.h
 |    0
 arch/arm/include/asm/{imx-common => mach-imx}/hab.h
 |    0
 arch/arm/include/asm/{imx-common => mach-imx}/imximage.cfg
 |    0
 arch/arm/include/asm/{imx-common => mach-imx}/iomux-v3.h
 |    0
 arch/arm/include/asm/{imx-common => mach-imx}/mx5_video.h
 |    0
 arch/arm/include/asm/{imx-common => mach-imx}/mxc_i2c.h
 |    2 +-
 arch/arm/include/asm/{imx-common => mach-imx}/rdc-sema.h
 |    0
 arch/arm/include/asm/{imx-common => mach-imx}/regs-apbh.h
 |    2 +-
 arch/arm/include/asm/{imx-common => mach-imx}/regs-bch.h
 |    2 +-
 arch/arm/include/asm/{imx-common => mach-imx}/regs-common.h
 |    0
 arch/arm/include/asm/{imx-common => mach-imx}/regs-gpmi.h
 |    2 +-
 arch/arm/include/asm/{imx-common => mach-imx}/regs-lcdif.h
 |    2 +-
 arch/arm/include/asm/{imx-common => mach-imx}/regs-usbphy.h
 |    0
 arch/arm/include/asm/{imx-common => mach-imx}/sata.h
 |    0
 arch/arm/include/asm/{imx-common => mach-imx}/spi.h
 |    0
 arch/arm/include/asm/{imx-common => mach-imx}/sys_proto.h
 |    2 +-
 arch/arm/include/asm/{imx-common => mach-imx}/syscounter.h
 |    0
 arch/arm/include/asm/{imx-common => mach-imx}/video.h
 |    0
 arch/arm/{imx-common => mach-imx}/Kconfig
 |    0
 arch/arm/{imx-common => mach-imx}/Makefile
 |    6 +
 arch/arm/{imx-common => mach-imx}/cache.c
 |    2 +-
 arch/arm/{imx-common => mach-imx}/cmd_bmode.c
 |    2 +-
 arch/arm/{imx-common => mach-imx}/cmd_dek.c
 |    0
 arch/arm/{imx-common => mach-imx}/cmd_hdmidet.c
 |    0
 arch/arm/{imx-common => mach-imx}/cpu.c
 |    0
 arch/arm/{imx-common => mach-imx}/ddrmc-vf610.c
 |    0
 arch/arm/{imx-common => mach-imx}/hab.c
 |    2 +-
 arch/arm/{imx-common => mach-imx}/i2c-mxv7.c
 |    2 +-
 arch/arm/{imx-common => mach-imx}/imx_bootaux.c
 |    0
 arch/arm/{imx-common => mach-imx}/init.c
 |    2 +-
 arch/arm/{imx-common => mach-imx}/iomux-v3.c
 |    4 +-
 arch/arm/{imx-common => mach-imx}/misc.c
 |    2 +-
 arch/arm/{cpu/armv7 => mach-imx}/mx5/Kconfig
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx5/Makefile
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx5/clock.c
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx5/lowlevel_init.S
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx5/soc.c
 |    2 +-
 arch/arm/{cpu/armv7 => mach-imx}/mx6/Kconfig
 |    7 +-
 arch/arm/{cpu/armv7 => mach-imx}/mx6/Makefile
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx6/clock.c
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx6/ddr.c
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx6/litesom.c
 |    4 +-
 arch/arm/{cpu/armv7 => mach-imx}/mx6/mp.c
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx6/opos6ul.c
 |    2 +-
 arch/arm/{cpu/armv7 => mach-imx}/mx6/soc.c
 |   15 ++-
 arch/arm/{cpu/armv7 => mach-imx}/mx7/Kconfig
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx7/Makefile
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx7/clock.c
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx7/clock_slice.c
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx7/psci-mx7.c
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx7/psci.S
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx7/soc.c
 |    8 +-
 arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/Kconfig
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/Makefile
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/clock.c
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/iomux.c
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/pcc.c
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/scg.c
 |    0
 arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/soc.c
 |    2 +-
 arch/arm/{imx-common => mach-imx}/rdc-sema.c
 |    2 +-
 arch/arm/{imx-common => mach-imx}/sata.c
 |    2 +-
 arch/arm/{imx-common => mach-imx}/speed.c
 |    0
 arch/arm/{imx-common => mach-imx}/spl.c
 |    2 +-
 arch/arm/{imx-common => mach-imx}/spl_sd.cfg
 |    0
 arch/arm/{imx-common => mach-imx}/syscounter.c
 |    2 +-
 arch/arm/{imx-common => mach-imx}/timer.c
 |    0
 arch/arm/{imx-common => mach-imx}/video.c
 |    2 +-
 board/advantech/dms-ba16/dms-ba16.c
 |    8 +-
 board/aries/m53evk/imximage.cfg
 |    2 +-
 board/aries/m53evk/m53evk.c
 |    2 +-
 board/aristainetos/aristainetos-v1.c
 |    8 +-
 board/aristainetos/aristainetos-v2.c
 |    8 +-
 board/aristainetos/aristainetos.c
 |    8 +-
 board/armadeus/opos6uldev/Kconfig
 |    2 +-
 board/armadeus/opos6uldev/board.c
 |    2 +-
 board/bachmann/ot1200/ot1200.c
 |    8 +-
 board/barco/platinum/platinum.c
 |    4 +-
 board/barco/platinum/platinum_picon.c
 |    4 +-
 board/barco/platinum/platinum_titanium.c
 |    4 +-
 board/barco/platinum/spl_picon.c
 |    6 +-
 board/barco/platinum/spl_titanium.c
 |    6 +-
 board/barco/titanium/titanium.c
 |    6 +-
 board/beckhoff/mx53cx9020/mx53cx9020.c
 |    2 +-
 board/boundary/nitrogen6x/nitrogen6x.c
 |   12 +-
 board/ccv/xpress/xpress.c
 |    6 +-
 board/compulab/cm_fx6/cm_fx6.c
 |    6 +-
 board/compulab/cm_fx6/common.c
 |    2 +-
 board/compulab/cm_fx6/spl.c
 |    2 +-
 board/congatec/cgtqmx6eval/cgtqmx6eval.c
 |    8 +-
 board/el/el6x/el6x.c
 |    8 +-
 board/embest/mx6boards/mx6boards.c
 |   10 +-
 board/engicam/common/spl.c
 |    4 +-
 board/engicam/geam6ul/geam6ul.c
 |    2 +-
 board/engicam/icorem6/icorem6.c
 |    4 +-
 board/engicam/icorem6_rqs/MAINTAINERS
 |    2 +-
 board/engicam/icorem6_rqs/icorem6_rqs.c
 |    2 +-
 board/engicam/isiotmx6ul/isiotmx6ul.c
 |    2 +-
 board/freescale/mx51evk/mx51evk.c
 |    2 +-
 board/freescale/mx53evk/mx53evk.c
 |    2 +-
 board/freescale/mx53loco/mx53loco.c
 |    2 +-
 board/freescale/mx6qarm2/mx6qarm2.c
 |    2 +-
 board/freescale/mx6qsabreauto/MAINTAINERS
 |    9 --
 board/freescale/mx6qsabreauto/imximage.cfg
 |  129 ---------------------
 board/freescale/mx6qsabreauto/mx6dl.cfg
 |  130 ---------------------
 board/freescale/mx6qsabreauto/mx6qp.cfg
 |  145 ------------------------
 board/freescale/mx6qsabreauto/mx6qsabreauto.c
 |  704
-----------------------------------------------------------------------------------------------------------------
 board/freescale/{mx6qsabreauto => mx6sabreauto}/Kconfig
 |    6 +-
 board/freescale/mx6sabreauto/MAINTAINERS
 |    7 ++
 board/freescale/{mx6qsabreauto => mx6sabreauto}/Makefile
 |    2 +-
 board/freescale/mx6sabreauto/README
 |   82 ++++++++++++++
 board/freescale/mx6sabreauto/mx6sabreauto.c
 | 1159
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/freescale/mx6sabresd/mx6sabresd.c
 |    8 +-
 board/freescale/mx6slevk/mx6slevk.c
 |    6 +-
 board/freescale/mx6sllevk/mx6sllevk.c
 |    4 +-
 board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
 |    4 +-
 board/freescale/mx6sxsabresd/mx6sxsabresd.c
 |    4 +-
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
 |    6 +-
 board/freescale/mx6ullevk/mx6ullevk.c
 |    4 +-
 board/freescale/mx7dsabresd/mx7dsabresd.c
 |   10 +-
 board/freescale/s32v234evb/s32v234evb.cfg
 |    2 +-
 board/freescale/vf610twr/imximage.cfg
 |    2 +-
 board/gateworks/gw_ventana/common.c
 |    2 +-
 board/gateworks/gw_ventana/gw_ventana.c
 |    8 +-
 board/gateworks/gw_ventana/gw_ventana_spl.c
 |    6 +-
 board/ge/bx50v3/bx50v3.c
 |    8 +-
 board/grinn/liteboard/board.c
 |    4 +-
 board/kosagi/novena/novena.c
 |   10 +-
 board/kosagi/novena/novena_spl.c
 |    6 +-
 board/kosagi/novena/video.c
 |    6 +-
 board/liebherr/mccmon6/mccmon6.c
 |    8 +-
 board/liebherr/mccmon6/spl.c
 |    4 +-
 board/logicpd/imx6/imx6logic.c
 |    4 +-
 board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg
 |    2 +-
 board/phytec/pcm052/imximage.cfg
 |    2 +-
 board/phytec/pcm058/pcm058.c
 |    8 +-
 board/samtec/vining_2000/vining_2000.c
 |    4 +-
 board/seco/common/mx6.c
 |    6 +-
 board/seco/mx6quq7/mx6quq7.c
 |    6 +-
 board/solidrun/mx6cuboxi/mx6cuboxi.c
 |    9 +-
 board/tbs/tbs2910/tbs2910.c
 |   10 +-
 board/technexion/pico-imx6ul/pico-imx6ul.c
 |    4 +-
 board/technexion/pico-imx7d/pico-imx7d.c
 |    4 +-
 board/technologic/ts4800/ts4800.c
 |    2 +-
 board/toradex/apalis_imx6/apalis_imx6.c
 |   10 +-
 board/toradex/apalis_imx6/pf0100.c
 |    2 +-
 board/toradex/colibri_imx6/colibri_imx6.c
 |   10 +-
 board/toradex/colibri_imx6/pf0100.c
 |    2 +-
 board/toradex/colibri_imx7/colibri_imx7.c
 |    4 +-
 board/toradex/colibri_vf/imximage.cfg
 |    2 +-
 board/tqc/tqma6/tqma6.c
 |    4 +-
 board/tqc/tqma6/tqma6_mba6.c
 |    2 +-
 board/tqc/tqma6/tqma6_wru4.c
 |    4 +-
 board/udoo/neo/neo.c
 |    4 +-
 board/udoo/udoo.c
 |    4 +-
 board/udoo/udoo_spl.c
 |    4 +-
 board/wandboard/spl.c
 |    6 +-
 board/wandboard/wandboard.c
 |   10 +-
 board/warp/warp.c
 |    6 +-
 board/warp7/warp7.c
 |    4 +-
 configs/apalis_imx6_defconfig
 |    2 +-
 configs/cgtqmx6eval_defconfig
 |    2 +-
 configs/cm_fx6_defconfig
 |    2 +-
 configs/colibri_imx6_defconfig
 |    2 +-
 configs/gwventana_emmc_defconfig
 |    2 +-
 configs/gwventana_gw5904_defconfig
 |    2 +-
 configs/gwventana_nand_defconfig
 |    2 +-
 configs/imx6qdl_icore_mmc_defconfig
 |    6 +-
 configs/imx6qdl_icore_nand_defconfig
 |    2 +-
 configs/{imx6qdl_icore_rqs_mmc_defconfig =>
imx6qdl_icore_rqs_defconfig} |    2 +-
 configs/imx6ul_geam_mmc_defconfig
 |    2 +-
 configs/imx6ul_geam_nand_defconfig
 |    2 +-
 configs/imx6ul_isiot_emmc_defconfig
 |    2 +-
 configs/imx6ul_isiot_mmc_defconfig
 |    2 +-
 configs/imx6ul_isiot_nand_defconfig
 |    2 +-
 configs/liteboard_defconfig
 |    2 +-
 configs/mx53cx9020_defconfig
 |    1 +
 configs/mx6cuboxi_defconfig
 |    3 +-
 configs/mx6qpsabreauto_defconfig
 |   43 -------
 configs/mx6qsabreauto_defconfig
 |   44 --------
 configs/{mx6dlsabreauto_defconfig => mx6sabreauto_defconfig}
 |   18 ++-
 configs/mx6sabresd_defconfig
 |    3 +-
 configs/mx6slevk_spl_defconfig
 |    2 +-
 configs/mx6sxsabresd_spl_defconfig
 |    2 +-
 configs/mx6ul_14x14_evk_defconfig
 |    2 +-
 configs/mx6ul_9x9_evk_defconfig
 |    2 +-
 configs/novena_defconfig
 |    2 +-
 configs/ot1200_defconfig
 |    2 +
 configs/ot1200_spl_defconfig
 |    4 +-
 configs/pcm058_defconfig
 |    2 +-
 configs/platinum_picon_defconfig
 |    2 +-
 configs/platinum_titanium_defconfig
 |    2 +-
 configs/udoo_defconfig
 |    2 +-
 configs/udoo_neo_defconfig
 |    2 +-
 configs/wandboard_defconfig
 |    2 +-
 configs/warp_defconfig
 |    1 +
 configs/xpress_spl_defconfig
 |    2 +-
 configs/zc5202_defconfig
 |    2 +-
 configs/zc5601_defconfig
 |    2 +-
 doc/README.fsl-esdhc
 |    2 -
 doc/README.imximage
 |    2 +-
 drivers/dma/apbh_dma.c
 |    4 +-
 drivers/gpio/vybrid_gpio.c
 |    2 +-
 drivers/i2c/mxc_i2c.c
 |    2 +-
 drivers/misc/mxc_ocotp.c
 |    2 +-
 drivers/mmc/fsl_esdhc.c
 |   36 +++++-
 drivers/mmc/mxsmmc.c
 |    2 +-
 drivers/mtd/nand/mxs_nand.c
 |    7 +-
 drivers/net/fec_mxc.c
 |   26 +++--
 drivers/serial/Kconfig
 |    8 ++
 drivers/serial/serial_mxc.c
 |  387 +++++++++++++++++++++++++++++++--------------------------------
 drivers/spi/mxc_spi.c
 |    2 +-
 drivers/spi/mxs_spi.c
 |    2 +-
 drivers/usb/host/ehci-mx6.c
 |    4 +-
 drivers/usb/host/ehci-vf.c
 |    4 +-
 drivers/video/mxsfb.c
 |    2 +-
 include/configs/advantech_dms-ba16.h
 |    2 +-
 include/configs/apalis_imx6.h
 |    2 +-
 include/configs/colibri_imx6.h
 |    2 +-
 include/configs/embestmx6boards.h
 |    6 +-
 include/configs/ge_bx50v3.h
 |    2 +-
 include/configs/imx6_spl.h
 |    6 +-
 include/configs/mx53cx9020.h
 |   17 ++-
 include/configs/mx6_common.h
 |    2 +-
 include/configs/mx6cuboxi.h
 |   13 +++
 include/configs/mx6sabre_common.h
 |    5 +-
 include/configs/{mx6qsabreauto.h => mx6sabreauto.h}
 |   27 ++++-
 include/configs/mx6sabresd.h
 |    7 +-
 include/configs/mx6ul_14x14_evk.h
 |    2 +-
 include/configs/mx6ullevk.h
 |    2 +-
 include/configs/mx7_common.h
 |    2 +-
 include/configs/ot1200.h
 |    3 +
 include/configs/pico-imx6ul.h
 |    2 +-
 include/configs/wandboard.h
 |    2 +
 include/configs/warp.h
 |    6 +-
 include/configs/xpress.h
 |    2 +-
 include/fsl_esdhc.h
 |    3 +-
 scripts/config_whitelist.txt
 |    1 -
 tools/imximage.h
 |    2 +-
 291 files changed, 1997 insertions(+), 1810 deletions(-)
 create mode 100644
Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
 rename arch/arm/include/asm/{imx-common => mach-imx}/boot_mode.h (100%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/dma.h (100%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/gpio.h (100%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/hab.h (100%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/imximage.cfg (100%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/iomux-v3.h (100%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/mx5_video.h (100%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/mxc_i2c.h (98%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/rdc-sema.h (100%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/regs-apbh.h (99%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/regs-bch.h (99%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/regs-common.h (100%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/regs-gpmi.h (99%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/regs-lcdif.h (99%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/regs-usbphy.h (100%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/sata.h (100%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/spi.h (100%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/sys_proto.h (98%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/syscounter.h (100%)
 rename arch/arm/include/asm/{imx-common => mach-imx}/video.h (100%)
 rename arch/arm/{imx-common => mach-imx}/Kconfig (100%)
 rename arch/arm/{imx-common => mach-imx}/Makefile (96%)
 rename arch/arm/{imx-common => mach-imx}/cache.c (98%)
 rename arch/arm/{imx-common => mach-imx}/cmd_bmode.c (97%)
 rename arch/arm/{imx-common => mach-imx}/cmd_dek.c (100%)
 rename arch/arm/{imx-common => mach-imx}/cmd_hdmidet.c (100%)
 rename arch/arm/{imx-common => mach-imx}/cpu.c (100%)
 rename arch/arm/{imx-common => mach-imx}/ddrmc-vf610.c (100%)
 rename arch/arm/{imx-common => mach-imx}/hab.c (99%)
 rename arch/arm/{imx-common => mach-imx}/i2c-mxv7.c (98%)
 rename arch/arm/{imx-common => mach-imx}/imx_bootaux.c (100%)
 rename arch/arm/{imx-common => mach-imx}/init.c (98%)
 rename arch/arm/{imx-common => mach-imx}/iomux-v3.c (97%)
 rename arch/arm/{imx-common => mach-imx}/misc.c (97%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx5/Kconfig (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx5/Makefile (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx5/clock.c (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx5/lowlevel_init.S (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx5/soc.c (98%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx6/Kconfig (98%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx6/Makefile (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx6/clock.c (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx6/ddr.c (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx6/litesom.c (98%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx6/mp.c (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx6/opos6ul.c (99%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx6/soc.c (98%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7/Kconfig (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7/Makefile (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7/clock.c (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7/clock_slice.c (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7/psci-mx7.c (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7/psci.S (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7/soc.c (98%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/Kconfig (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/Makefile (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/clock.c (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/iomux.c (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/pcc.c (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/scg.c (100%)
 rename arch/arm/{cpu/armv7 => mach-imx}/mx7ulp/soc.c (99%)
 rename arch/arm/{imx-common => mach-imx}/rdc-sema.c (99%)
 rename arch/arm/{imx-common => mach-imx}/sata.c (95%)
 rename arch/arm/{imx-common => mach-imx}/speed.c (100%)
 rename arch/arm/{imx-common => mach-imx}/spl.c (99%)
 rename arch/arm/{imx-common => mach-imx}/spl_sd.cfg (100%)
 rename arch/arm/{imx-common => mach-imx}/syscounter.c (98%)
 rename arch/arm/{imx-common => mach-imx}/timer.c (100%)
 rename arch/arm/{imx-common => mach-imx}/video.c (97%)
 delete mode 100644 board/freescale/mx6qsabreauto/MAINTAINERS
 delete mode 100644 board/freescale/mx6qsabreauto/imximage.cfg
 delete mode 100644 board/freescale/mx6qsabreauto/mx6dl.cfg
 delete mode 100644 board/freescale/mx6qsabreauto/mx6qp.cfg
 delete mode 100644 board/freescale/mx6qsabreauto/mx6qsabreauto.c
 rename board/freescale/{mx6qsabreauto => mx6sabreauto}/Kconfig (54%)
 create mode 100644 board/freescale/mx6sabreauto/MAINTAINERS
 rename board/freescale/{mx6qsabreauto => mx6sabreauto}/Makefile (85%)
 create mode 100644 board/freescale/mx6sabreauto/README
 create mode 100644 board/freescale/mx6sabreauto/mx6sabreauto.c
 rename configs/{imx6qdl_icore_rqs_mmc_defconfig =>
imx6qdl_icore_rqs_defconfig} (92%)
 delete mode 100644 configs/mx6qpsabreauto_defconfig
 delete mode 100644 configs/mx6qsabreauto_defconfig
 rename configs/{mx6dlsabreauto_defconfig => mx6sabreauto_defconfig} (67%)
 rename include/configs/{mx6qsabreauto.h => mx6sabreauto.h} (74%)

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-06-27  7:53 Stefano Babic
@ 2017-06-27 17:32 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-06-27 17:32 UTC (permalink / raw)
  To: u-boot

On Tue, Jun 27, 2017 at 09:53:35AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> this should be my last PR for the release. I checked which fixes should
> go into release and all other patches can wait. I am starting to merge
> pending patches into -next.
> 
> Most of commits are fixes (mx25, pciimx,..). Exception is pico-imx7d: I
> merged since a lot of time, and I convinced I have already sent a
> PR...sorry, for that.
> 
> For all imxers: let me know if I missed aome patches that *must* flow
> into 2017.07. IMHO all of the pending patches can wait and I merge now
> in -next.
> 
> The following changes since commit ccbbada0a59fead35495409d0c2c7bcb22a40278:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-mmc (2017-05-30
> 14:07:23 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 65496a34835cb4c9547bd02dd15b018c333add9d:
> 
>   mx6: soc: Fix typo in temperature unit name (2017-06-27 09:06:09 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170627/f8ef2a6d/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-06-27  7:53 Stefano Babic
  2017-06-27 17:32 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-06-27  7:53 UTC (permalink / raw)
  To: u-boot

Hi Tom,

this should be my last PR for the release. I checked which fixes should
go into release and all other patches can wait. I am starting to merge
pending patches into -next.

Most of commits are fixes (mx25, pciimx,..). Exception is pico-imx7d: I
merged since a lot of time, and I convinced I have already sent a
PR...sorry, for that.

For all imxers: let me know if I missed aome patches that *must* flow
into 2017.07. IMHO all of the pending patches can wait and I merge now
in -next.

The following changes since commit ccbbada0a59fead35495409d0c2c7bcb22a40278:

  Merge branch 'master' of git://git.denx.de/u-boot-mmc (2017-05-30
14:07:23 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 65496a34835cb4c9547bd02dd15b018c333add9d:

  mx6: soc: Fix typo in temperature unit name (2017-06-27 09:06:09 +0200)

----------------------------------------------------------------
Benoît Thébaudeau (4):
      mmc: fsl_esdhc: Allow all supported prescaler values
      mx25: Fix imx_get_perclk()
      mx25: Add function to set PER clocks
      mx25pdk: Set the eSDHC PER clock to 48 MHz

Fabio Estevam (5):
      mx7dsabresd: Increase CONFIG_ENV_OFFSET
      mx6sabresd: Rename target to mx6sabresd_defconfig
      mx6sabresd: Update the config file
      mx6sabresd: Update to SPL only mode
      mx6: soc: Fix typo in temperature unit name

Jagan Teki (9):
      mmc: fsl_esdhc: Move non DM_MMC code in #ifndef CONFIG_DM_MMC
      engicam: Move SPL mmc configs under CONFIG_SPL_BUILD
      icorem6: Recover missing nand defconfig
      drivers: net: Kconfig: Add PHY_MICREL_KSZ9021 entry
      engicam: Move PHY configs to defconfig
      icorem6: Remove unused FEC configs
      engicam: Set console env on board_late_init
      engicam: Add fdt_addr env value based on cpu_type
      engicam: Generate single config file

Lothar Waßmann (1):
      arm: mx6: remove unused config variable CONFIG_SPL_NAND_MXS

Peng Fan (2):
      regulator: pfuze100: add SPDX License
      regulator: pfuze100: unsigned compared against 0

Tim Harvey (1):
      drivers: pci: imx: add imx_pcie_remove function

Vanessa Maegima (1):
      pico-imx7d: Add initial support

 arch/arm/cpu/arm926ejs/mx25/generic.c                      |  30 +++++++++-
 arch/arm/cpu/armv7/mx6/soc.c                               |   2 +-
 arch/arm/cpu/armv7/mx7/Kconfig                             |   8 +++
 arch/arm/imx-common/cpu.c                                  |   3 +
 arch/arm/include/asm/arch-mx25/clock.h                     |   1 +
 board/engicam/common/board.c                               |   5 ++
 board/engicam/geam6ul/Kconfig                              |   2 +-
 board/engicam/icorem6/Kconfig                              |   2 +-
 board/engicam/icorem6_rqs/Kconfig                          |   2 +-
 board/engicam/isiotmx6ul/Kconfig                           |   2 +-
 board/freescale/mx25pdk/mx25pdk.c                          |   6 ++
 board/freescale/mx6sabresd/MAINTAINERS                     |   4 +-
 board/freescale/mx6sabresd/README                          |  84
++++++++++------------------
 board/technexion/pico-imx7d/Kconfig                        |  15 +++++
 board/technexion/pico-imx7d/MAINTAINERS                    |   7 +++
 board/technexion/pico-imx7d/Makefile                       |   6 ++
 board/technexion/pico-imx7d/README                         |  49
++++++++++++++++
 board/technexion/pico-imx7d/imximage.cfg                   |  98
++++++++++++++++++++++++++++++++
 board/technexion/pico-imx7d/pico-imx7d.c                   | 289
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 configs/imx6qdl_icore_mmc_defconfig                        |   2 +
 configs/imx6qdl_icore_nand_defconfig                       |  47
++++++++++++++++
 configs/imx6qdl_icore_rqs_mmc_defconfig                    |   3 +
 configs/imx6ul_geam_mmc_defconfig                          |   2 +
 configs/imx6ul_geam_nand_defconfig                         |   2 +
 configs/imx6ul_isiot_emmc_defconfig                        |   2 +
 configs/imx6ul_isiot_mmc_defconfig                         |   2 +
 configs/imx6ul_isiot_nand_defconfig                        |   2 +
 configs/{mx6sabresd_spl_defconfig => mx6sabresd_defconfig} |   0
 configs/pico-imx7d_defconfig                               |  35
++++++++++++
 drivers/mmc/fsl_esdhc.c                                    |  53
+++++++++---------
 drivers/net/phy/Kconfig                                    |   8 +++
 drivers/pci/pcie_imx.c                                     |  38
+++++++++++++
 drivers/power/regulator/pfuze100.c                         |  14 ++++-
 include/configs/{imx6qdl_icore.h => imx6-engicam.h}        |  47
+++++++++++-----
 include/configs/imx6_spl.h                                 |   5 --
 include/configs/imx6qdl_icore_rqs.h                        | 147
------------------------------------------------
 include/configs/imx6ul_geam.h                              | 195
----------------------------------------------------------------
 include/configs/imx6ul_isiot.h                             | 196
----------------------------------------------------------------
 include/configs/mx7dsabresd.h                              |   2 +-
 include/configs/pico-imx7d.h                               | 143
+++++++++++++++++++++++++++++++++++++++++++++++
 include/pci.h                                              |   4 ++
 scripts/config_whitelist.txt                               |   1 -
 42 files changed, 912 insertions(+), 653 deletions(-)
 create mode 100644 board/technexion/pico-imx7d/Kconfig
 create mode 100644 board/technexion/pico-imx7d/MAINTAINERS
 create mode 100644 board/technexion/pico-imx7d/Makefile
 create mode 100644 board/technexion/pico-imx7d/README
 create mode 100644 board/technexion/pico-imx7d/imximage.cfg
 create mode 100644 board/technexion/pico-imx7d/pico-imx7d.c
 create mode 100644 configs/imx6qdl_icore_nand_defconfig
 rename configs/{mx6sabresd_spl_defconfig => mx6sabresd_defconfig} (100%)
 create mode 100644 configs/pico-imx7d_defconfig
 rename include/configs/{imx6qdl_icore.h => imx6-engicam.h} (84%)
 delete mode 100644 include/configs/imx6qdl_icore_rqs.h
 delete mode 100644 include/configs/imx6ul_geam.h
 delete mode 100644 include/configs/imx6ul_isiot.h
 create mode 100644 include/configs/pico-imx7d.h

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-05-18 10:16 Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2017-05-18 10:16 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit fa8967cfbaed5582ba987756fa9f0470a9affbf4:

  Merge git://git.denx.de/u-boot-uniphier (2017-05-17 14:13:58 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 5c84ad097d829bb1e6460438f33e1536b23b3c9b:

  Merge branch 'master' of git://git.denx.de/u-boot-imx (2017-05-18
11:53:55 +0200)

----------------------------------------------------------------
Andy Duan (4):
      net: fec_mxc: avoid transfer dev_id -1 to get mac address from fuse
      net: fec_mxc: specify the registered eth index by dev_id
      net: fec_mxc: avoid transfer dev_id -1 to get mac address from fuse
      net: fec_mxc: specify the registered eth index by dev_id

Fabio Estevam (5):
      mx25pdk: Add fuse API support
      mx25pdk: Add fuse API support
      mx6sabresd: Prepare for supporting MX6DL
      mx6sabresd: Add SPL support for the mx6dl variant
      mx6sabresd: Remove non-SPL targets

Jagan Teki (32):
      icorem6: Add modeboot env via board_late_init
      icorem6: Add mmc_late_init
      geam6ul: Add modeboot env via board_late_init
      geam6ul: Add mmc_late_init
      engicam: Set fdt_file env during run-time
      icorem6: Make SPL to pick suitable fdt
      engicam: Move uart mux init to SPL
      icorem6: Use proper iomux_ddr_regs drive strength values
      icorem6: Use drive strength macros
      i.MX6UL: geam6ul: Add SETUP_IOMUX_PADS
      isiot: Fix to use usdhc2_pads for mmc2
      i.MX6UL: isiot: Add SETUP_IOMUX_PADS
      icorem6[_rqs]: Move the spl code common
      geam6/isiot: Move the spl code common
      engicam: common: Move common board code
      engicam: common: Move board_late_init
      icorem6: Add modeboot env via board_late_init
      icorem6: Add mmc_late_init
      geam6ul: Add modeboot env via board_late_init
      geam6ul: Add mmc_late_init
      engicam: Set fdt_file env during run-time
      icorem6: Make SPL to pick suitable fdt
      engicam: Move uart mux init to SPL
      icorem6: Use proper iomux_ddr_regs drive strength values
      icorem6: Use drive strength macros
      i.MX6UL: geam6ul: Add SETUP_IOMUX_PADS
      isiot: Fix to use usdhc2_pads for mmc2
      i.MX6UL: isiot: Add SETUP_IOMUX_PADS
      icorem6[_rqs]: Move the spl code common
      geam6/isiot: Move the spl code common
      engicam: common: Move common board code
      engicam: common: Move board_late_init

Peng Fan (22):
      net: fec: do not access reserved register for i.MX6ULL
      imx-common: timer: clean up
      imx: thermal: update imx6 thermal driver according new equation
      thermal: imx: fix calculation
      imx-common: rdc-sema: correct return value
      net: fec: do not access reserved register for i.MX6ULL
      imx-common: timer: clean up
      imx: thermal: update imx6 thermal driver according new equation
      thermal: imx: fix calculation
      imx-common: rdc-sema: correct return value
      arm: dts: imx7: sync with Linux
      arm: dts: imx7d-sdb add basic dts
      arm: dts: imx7d-sdb: add spi gpio node
      arm: dts: imx7d-sdb: add regulator node for usb and mmc
      arm: dts: imx7d-sdb: add i2c support
      arm: dts: imx7d-sdb: add usdhc support
      spi: kconfig: add soft spi Kconfig entry
      gpio: 74x164: make oe-pins optional
      imx: mx7dsabresd: enable more DM drivers
      imx: mx7dsabresd: reset ENET_RST_B
      imx: mx7dsabresd: switch to DM USB
      pinctrl: imx: fix memory leak

Stefano Babic (3):
      Merge branch 'master' of git://git.denx.de/u-boot
      imx: mx7dsabresd: fix secure config after switching to DM
      Merge branch 'master' of git://git.denx.de/u-boot-imx

Tim Harvey (2):
      imx: ventana: fix GW520x external watchdog dt update
      imx: ventana: update imx wdog external reset dt property

 arch/arm/cpu/armv7/mx6/Kconfig                                      |   6 +
 arch/arm/dts/Makefile                                               |
3 +-
 arch/arm/dts/imx7-colibri.dts                                       |
10 +-
 arch/arm/dts/imx7.dtsi                                              |
194 ------
 arch/arm/dts/imx7d-pinfunc.h                                        |
111 ++--
 arch/arm/dts/imx7d-sdb.dts                                          |
309 ++++++++++
 arch/arm/dts/imx7d.dtsi                                             |
140 +++++
 arch/arm/dts/imx7s.dtsi                                             |
999 +++++++++++++++++++++++++++++++
 arch/arm/imx-common/rdc-sema.c                                      |
2 +-
 arch/arm/imx-common/timer.c                                         |   3 -
 arch/arm/include/asm/imx-common/iomux-v3.h                          |   6 +
 board/engicam/common/Makefile                                       |   7 +
 board/engicam/common/board.c                                        |
82 +++
 board/engicam/common/board.h                                        |  12 +
 board/engicam/common/spl.c                                          |
393 ++++++++++++
 board/engicam/geam6ul/geam6ul.c                                     |
206 +------
 board/engicam/icorem6/MAINTAINERS                                   |
6 +-
 board/engicam/icorem6/icorem6.c                                     |
330 +---------
 board/engicam/icorem6_rqs/MAINTAINERS                               |
3 +-
 board/engicam/icorem6_rqs/icorem6_rqs.c                             |
352 +----------
 board/engicam/isiotmx6ul/isiotmx6ul.c                               |
261 ++------
 board/freescale/mx6sabresd/mx6dlsabresd.cfg                         |
131 ----
 board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg                     |
169 ------
 board/freescale/mx6sabresd/mx6sabresd.c                             |
341 +++++++----
 board/freescale/mx7dsabresd/mx7dsabresd.c                           |
326 +---------
 board/gateworks/gw_ventana/gw_ventana.c                             |
31 +-
 configs/imx6dl_icore_mmc_defconfig                                  |
44 --
 configs/imx6dl_icore_nand_defconfig                                 |
45 --
 configs/imx6dl_icore_rqs_mmc_defconfig                              |
41 --
 configs/imx6q_icore_nand_defconfig                                  |
45 --
 configs/{imx6q_icore_mmc_defconfig => imx6qdl_icore_mmc_defconfig}  |
2 +-
 ...mx6q_icore_rqs_mmc_defconfig => imx6qdl_icore_rqs_mmc_defconfig} |
2 +-
 configs/imx6ul_geam_mmc_defconfig                                   |   1 -
 configs/imx6ul_geam_nand_defconfig                                  |   1 -
 configs/imx6ul_isiot_emmc_defconfig                                 |   1 -
 configs/imx6ul_isiot_mmc_defconfig                                  |   1 -
 configs/imx6ul_isiot_nand_defconfig                                 |   1 -
 configs/mx6dlsabresd_defconfig                                      |
44 --
 configs/mx6qsabresd_defconfig                                       |
44 --
 configs/mx6sabresd_spl_defconfig                                    |
2 +-
 configs/mx7dsabresd_defconfig                                       |
25 +-
 configs/mx7dsabresd_secure_defconfig                                |
26 +-
 drivers/gpio/74x164_gpio.c                                          |
3 +-
 drivers/net/fec_mxc.c                                               |
17 +-
 drivers/pinctrl/nxp/pinctrl-imx.c                                   |   4 +
 drivers/spi/Kconfig                                                 |   6 +
 drivers/thermal/imx_thermal.c                                       |
44 +-
 include/configs/imx6qdl_icore.h                                     |
39 +-
 include/configs/imx6qdl_icore_rqs.h                                 |   1 -
 include/configs/imx6ul_geam.h                                       |
38 +-
 include/configs/imx6ul_isiot.h                                      |   1 -
 include/configs/mx25pdk.h                                           |   4 +
 include/configs/mx7dsabresd.h                                       |  14 -
 include/dt-bindings/clock/imx7d-clock.h                             |
454 ++++++++++++++
 54 files changed, 2989 insertions(+), 2394 deletions(-)
 delete mode 100644 arch/arm/dts/imx7.dtsi
 create mode 100644 arch/arm/dts/imx7d-sdb.dts
 create mode 100644 arch/arm/dts/imx7d.dtsi
 create mode 100644 arch/arm/dts/imx7s.dtsi
 create mode 100644 board/engicam/common/Makefile
 create mode 100644 board/engicam/common/board.c
 create mode 100644 board/engicam/common/board.h
 create mode 100644 board/engicam/common/spl.c
 delete mode 100644 board/freescale/mx6sabresd/mx6dlsabresd.cfg
 delete mode 100644 board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg
 delete mode 100644 configs/imx6dl_icore_mmc_defconfig
 delete mode 100644 configs/imx6dl_icore_nand_defconfig
 delete mode 100644 configs/imx6dl_icore_rqs_mmc_defconfig
 delete mode 100644 configs/imx6q_icore_nand_defconfig
 rename configs/{imx6q_icore_mmc_defconfig =>
imx6qdl_icore_mmc_defconfig} (96%)
 rename configs/{imx6q_icore_rqs_mmc_defconfig =>
imx6qdl_icore_rqs_mmc_defconfig} (95%)
 delete mode 100644 configs/mx6dlsabresd_defconfig
 delete mode 100644 configs/mx6qsabresd_defconfig
 create mode 100644 include/dt-bindings/clock/imx7d-clock.h

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-04-13  8:01 Stefano Babic
@ 2017-04-14 21:08 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-04-14 21:08 UTC (permalink / raw)
  To: u-boot

On Thu, Apr 13, 2017 at 10:01:28AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit d5abcf94c7123167725fc22ace342f0d455093c1:
> 
>   ti: boot: Register the MMC controllers in SPL in the same way as in
> u-boot (2017-03-19 22:17:14 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to f479cec3b623778c26b23f66dc28cf33100ce089:
> 
>   imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOM
> (2017-04-12 18:59:12 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170414/75f537db/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-04-13  8:01 Stefano Babic
  2017-04-14 21:08 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-04-13  8:01 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit d5abcf94c7123167725fc22ace342f0d455093c1:

  ti: boot: Register the MMC controllers in SPL in the same way as in
u-boot (2017-03-19 22:17:14 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to f479cec3b623778c26b23f66dc28cf33100ce089:

  imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOM
(2017-04-12 18:59:12 +0200)

----------------------------------------------------------------
Adam Ford (1):
      imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOM

Breno Lima (1):
      mx6sabresd: README: Add eMMC boot configuration

Jagan Teki (2):
      configs: imx6: Select missing BOARD_LATE_INIT
      MAINTAINERS: Fix ARM FREESCALE IMX files

Lukasz Majewski (1):
      MCCMON6: defconfig: Add tftp_nor_dtb command for NOR DTB update

Marek Vasut (2):
      ARM: mxs: Rename M28EVK
      ARM: mx5: Rename M53EVK

Markus Niebel (1):
      cmd_mmc: fix arg parsing for setdsr subcmd

Peng Fan (3):
      imx: mx6slevk: use SPI_BOOT
      imx: mx6slevk: introduce device tree support
      imx: mx6slevk: enable more DM drivers

Tim Harvey (8):
      drivers: net: phy: add MV88E6xx options to Kconfig
      imx: ventana: add GW5904 support
      imx: ventana: add GW560x support
      imx: ventana: add GW5903 support
      imx: ventana: config: add EMMC boot options
      imx: ventana: fix GW5903 VDD_ARM rail
      imx: ventana: add new board configs to MAINTAINERS
      imx: ventana: config: set MMC env Partition to 1

Vagrant Cascadian (1):
      Set console speed to 115200 on mx6cuboxi.

Ye Li (1):
      imx: mx7ulp: Fix SPLL/APLL clock rate calculation issue

Yung-Ching LIN (4):
      board: advantech: dms-ba16: Add the configuration options for
display initialization
      board: advantech: dms-ba16: add the PMIC configuration support
      board: advantech: dms-ba16: fix AR8033 reset timing issue
      board: advantech: dms-ba16: apply the proper register setting to
fix the voltage peak issue

 MAINTAINERS                                  |    3 +-
 arch/arm/Kconfig                             |    4 +-
 arch/arm/cpu/armv7/mx6/Kconfig               |   16 +
 arch/arm/cpu/armv7/mx7ulp/scg.c              |    8 +-
 arch/arm/dts/Makefile                        |    2 +
 arch/arm/dts/imx6q-logicpd.dts               |  190 +++++
 arch/arm/dts/imx6qdl-logicpd.dtsi            |  361 +++++++++
 arch/arm/dts/imx6sl-evk.dts                  |  641 +++++++++++++++
 arch/arm/dts/imx6sl-pinfunc.h                | 1077
++++++++++++++++++++++++++
 arch/arm/dts/imx6sl.dtsi                     |  927 ++++++++++++++++++++++
 board/advantech/dms-ba16/dms-ba16.c          |   60 +-
 board/{denx => aries}/m28evk/Kconfig         |    2 +-
 board/{denx => aries}/m28evk/MAINTAINERS     |    2 +-
 board/{denx => aries}/m28evk/Makefile        |    0
 board/{denx => aries}/m28evk/README          |    6 +-
 board/{denx => aries}/m28evk/m28evk.c        |    6 +-
 board/{denx => aries}/m28evk/spl_boot.c      |    6 +-
 board/{denx => aries}/m53evk/Kconfig         |    2 +-
 board/{denx => aries}/m53evk/MAINTAINERS     |    2 +-
 board/{denx => aries}/m53evk/Makefile        |    2 +-
 board/{denx => aries}/m53evk/imximage.cfg    |    2 +-
 board/{denx => aries}/m53evk/m53evk.c        |    4 +-
 board/freescale/mx6sabresd/README            |   55 +-
 board/freescale/mx6slevk/mx6slevk.c          |  244 +++---
 board/gateworks/gw_ventana/MAINTAINERS       |    4 +-
 board/gateworks/gw_ventana/common.c          |  490 +++++++++++-
 board/gateworks/gw_ventana/common.h          |    2 +-
 board/gateworks/gw_ventana/eeprom.c          |   15 +-
 board/gateworks/gw_ventana/gsc.c             |    4 +
 board/gateworks/gw_ventana/gw_ventana.c      |   52 +-
 board/gateworks/gw_ventana/gw_ventana_spl.c  |   56 +-
 board/gateworks/gw_ventana/ventana_eeprom.h  |    3 +
 board/logicpd/imx6/Kconfig                   |   12 +
 board/logicpd/imx6/MAINTAINERS               |    6 +
 board/logicpd/imx6/Makefile                  |   10 +
 board/logicpd/imx6/README                    |   37 +
 board/logicpd/imx6/imx6logic.c               |  184 +++++
 board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg |  112 +++
 cmd/mmc.c                                    |    2 +-
 configs/gwventana_emmc_defconfig             |    1 +
 configs/gwventana_gw5904_defconfig           |   68 ++
 configs/gwventana_nand_defconfig             |    1 +
 configs/imx6dl_icore_rqs_mmc_defconfig       |    1 -
 configs/imx6q_icore_rqs_mmc_defconfig        |    1 -
 configs/imx6q_logic_defconfig                |   38 +
 configs/imx6ul_isiot_emmc_defconfig          |    1 -
 configs/imx6ul_isiot_mmc_defconfig           |    1 -
 configs/imx6ul_isiot_nand_defconfig          |    1 -
 configs/m53evk_defconfig                     |    2 +-
 configs/mx6slevk_defconfig                   |   16 +-
 configs/mx6slevk_spinor_defconfig            |   19 +-
 configs/mx6slevk_spl_defconfig               |    2 +-
 doc/README.mxs                               |    2 +-
 drivers/net/phy/Kconfig                      |   13 +
 drivers/video/mxsfb.c                        |    2 +-
 include/configs/advantech_dms-ba16.h         |    2 +
 include/configs/gw_ventana.h                 |    7 +-
 include/configs/imx6_logic.h                 |  178 +++++
 include/configs/m53evk.h                     |    2 +-
 include/configs/mccmon6.h                    |    8 +
 include/configs/mx6cuboxi.h                  |    2 +-
 include/configs/mx6slevk.h                   |    9 +-
 include/dt-bindings/clock/imx6sl-clock.h     |  180 +++++
 scripts/config_whitelist.txt                 |    2 +-
 64 files changed, 4931 insertions(+), 239 deletions(-)
 create mode 100644 arch/arm/dts/imx6q-logicpd.dts
 create mode 100644 arch/arm/dts/imx6qdl-logicpd.dtsi
 create mode 100644 arch/arm/dts/imx6sl-evk.dts
 create mode 100644 arch/arm/dts/imx6sl-pinfunc.h
 create mode 100644 arch/arm/dts/imx6sl.dtsi
 rename board/{denx => aries}/m28evk/Kconfig (89%)
 rename board/{denx => aries}/m28evk/MAINTAINERS (84%)
 rename board/{denx => aries}/m28evk/Makefile (100%)
 rename board/{denx => aries}/m28evk/README (82%)
 rename board/{denx => aries}/m28evk/m28evk.c (96%)
 rename board/{denx => aries}/m28evk/spl_boot.c (98%)
 rename board/{denx => aries}/m53evk/Kconfig (89%)
 rename board/{denx => aries}/m53evk/MAINTAINERS (84%)
 rename board/{denx => aries}/m53evk/Makefile (88%)
 rename board/{denx => aries}/m53evk/imximage.cfg (98%)
 rename board/{denx => aries}/m53evk/m53evk.c (99%)
 create mode 100644 board/logicpd/imx6/Kconfig
 create mode 100644 board/logicpd/imx6/MAINTAINERS
 create mode 100644 board/logicpd/imx6/Makefile
 create mode 100644 board/logicpd/imx6/README
 create mode 100644 board/logicpd/imx6/imx6logic.c
 create mode 100644 board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg
 create mode 100644 configs/gwventana_gw5904_defconfig
 create mode 100644 configs/imx6q_logic_defconfig
 create mode 100644 include/configs/imx6_logic.h
 create mode 100644 include/dt-bindings/clock/imx6sl-clock.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-03-19 17:07 Stefano Babic
@ 2017-03-20  0:34 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-03-20  0:34 UTC (permalink / raw)
  To: u-boot

On Sun, Mar 19, 2017 at 06:07:47PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 2808576491ae36b6ea96743005058f370d936beb:
> 
>   arm64: booti: allow to place kernel image anywhere in physical memory
> (2017-03-14 20:40:23 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to d883fcc6bbb2fcc3df90857fee99c2f543a0289c:
> 
>   imx: ventana: add EMMC configuration (2017-03-19 17:39:59 +0100)
> 

With a small fixup to arch/arm/dts/imx6ul-isiot.dtsi, applied to
u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170319/9b3c9da2/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-03-19 17:07 Stefano Babic
  2017-03-20  0:34 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-03-19 17:07 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 2808576491ae36b6ea96743005058f370d936beb:

  arm64: booti: allow to place kernel image anywhere in physical memory
(2017-03-14 20:40:23 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to d883fcc6bbb2fcc3df90857fee99c2f543a0289c:

  imx: ventana: add EMMC configuration (2017-03-19 17:39:59 +0100)

----------------------------------------------------------------
Fabio Estevam (3):
      mx7: Fix speed grade entry
      mx7: Fix the get_cpu_speed_grade_hz() return values
      mx7: Add 1.2GHz speed grade entry

Jagan Teki (25):
      configs: imx6: Don't define USDHC2_BASE_ADDR
      arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support
      arm: dts: imx6ul-isiot: Add I2C nodes
      imx6: isiotmx6ul: Add I2C support
      arm: dts: imx6ul-isiot: Add FEC node
      imx6: isiotmx6ul: Add FEC support
      imx6: isiotmx6ul: Add NAND support
      imx6: isiotmx6ul: Add nandboot env support
      imx6ul: isiotmx6ul: Enable I2C support
      i.MX6: engicam: Include dts files under MAINTAINERS
      imx6: Add imx6_src_get_boot_mode
      imx: spl: Update NAND bootmode detection bit
      imx: Use IMX6_BMODE_* macros instead of numericals
      imx6: Add src_base structure define macro
      imx6: isiotmx6ul: Update SPL board boot order for eMMC
      i.MX6UL: isiot: Add eMMC boot support
      i.MX6UL: isiot: Add modeboot env via board_late_init
      i.MX6UL: isiot: Add mmc_late_init
      i.MX6UL: isiot: Switch the mmc env based on devno
      arm: dts: imx6qdl-icore-rqs: Add eMMC node
      imx6: icorem6_rqs: Update SPL board boot order for eMMC
      imx6: icorem6_rqs: Add eMMC boot support
      i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init
      i.MX6Q: icorem6_rqs: Add mmc_late_init
      i.MX6Q: isiot: Switch the mmc env based on devno

Lukasz Majewski (1):
      MCCMON6: defconfig: Move 'quiet' console parameter to 'console'
env variable

Markus Niebel (7):
      imx6: tqma6: implement power_init_board
      imx6: tqma6: use lower driver stength for I2C pins
      imx6: tqma6: disable spi CS unused in U-Boot
      imx6: tqma6: adjust ethernet phy reset delay
      mx6: tqma6: clear enet clk sel for mba6
      arm: imx6: tqma6: use CONFIG_TQM6x for SOM specific settings
      arm: imx6: tqma6: add support for TQMa6DL variant

Peng Fan (17):
      imx: mx7ulp: Add mx7ulp to Kconfig
      imx: mx7ulp: add registers header file
      imx: mx7ulp: add iomux driver to support IOMUXC0 and IOMUXC1
      imx: mx7ulp: Add clock framework and functions
      imx: mx7ulp: Add soc level initialization codes and functions
      gpio: Add Rapid GPIO2P driver for i.MX7ULP
      mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULP
      pinctrl: Add i.MX7ULP pinctrl driver
      i2c: lpi2c: add lpi2c driver for i.MX7ULP
      serial: lpuart: restructure lpuart driver
      serial: lpuart: add i.MX7ULP support
      mx7ulp: Add HAB boot support
      arm: dts: add i.MX7ULP dtsi file
      mmc: fsl_esdhc: support i.MX7ULP
      imx: imx7ulp: add EVK board support
      imx: mx7ulp_evk: enable mmc/regulator support
      tools: imximage: add set bit command

Stefan Agner (8):
      toradex apalis/colibri: use common USB product id fallback
      toradex apalis/colibri: add device tree overlay support
      colibri_imx7/colibri_imx6/apalis_imx6: limit bootm memory
      colibri_imx7: implement board level USB PHY mode
      colibri_imx7: setup PMIC sleep mode configuration
      colibri_imx7: use device-tree for MTD partitions
      colibri_imx7: split and resize firmware MTD partition
      ARM: vf610: move to standard arch/board approach

Sébastien Szymanski (3):
      dm: imx: serial: add i.MX6UL support
      arm: i.MX6UL: add Armadeus Systems OPOS6UL SoM and OPOS6ULDev
carrier board
      arm: dts: imx6ul: add usbotg aliases

Tim Harvey (9):
      imx: ventana: add additional DRAM configurations
      imx: ventana: config: add gzwrite support
      imx: ventana: move mmc_init to common
      imx: ventana: use mmc_root in boot scripts
      imx: ventana: change name of rs232_en to indicate polarity
      imx: ventana: fix hwconfig
      imx: ventana: make OTG VBUS power enable board specific
      imx: ventana: make SD3_VSELECT board specific
      imx: ventana: add EMMC configuration

Ye Li (3):
      imx: mx7ulp: Implement the clock functions for i2c driver
      mx7ulp: Add iomux pins header file
      wdog: Add the watchdog driver for MX7ULP.

 arch/arm/Kconfig                                          |   36 ++----
 arch/arm/Makefile                                         |    2 +-
 arch/arm/cpu/armv7/Makefile                               |    3 +-
 arch/arm/cpu/armv7/mx6/Kconfig                            |   27 ++++
 arch/arm/cpu/armv7/mx6/Makefile                           |    1 +
 arch/arm/cpu/armv7/mx6/opos6ul.c                          |  302
+++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/mx7/soc.c                              |   13 +-
 arch/arm/cpu/armv7/mx7ulp/Kconfig                         |   17 +++
 arch/arm/cpu/armv7/mx7ulp/Makefile                        |    8 ++
 arch/arm/cpu/armv7/mx7ulp/clock.c                         |  365
++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/mx7ulp/iomux.c                         |   70
+++++++++++
 arch/arm/cpu/armv7/mx7ulp/pcc.c                           |  286
+++++++++++++++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/mx7ulp/scg.c                           | 1086
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/mx7ulp/soc.c                           |  247
+++++++++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/vf610/Kconfig                          |   36 ++++++
 arch/arm/cpu/armv7/vf610/generic.c                        |    5 +
 arch/arm/dts/Makefile                                     |    8 +-
 arch/arm/dts/imx6qdl-icore-rqs.dtsi                       |   22 ++++
 arch/arm/dts/imx6ul-isiot-emmc.dts                        |   77
++++++++++++
 arch/arm/dts/imx6ul-isiot-mmc.dts                         |   50 ++++++++
 arch/arm/dts/imx6ul-isiot-nand.dts                        |   50 ++++++++
 arch/arm/dts/imx6ul-isiot.dtsi                            |  142
+++++++++++++++++++++
 arch/arm/dts/imx6ul-opos6ul.dtsi                          |  192
+++++++++++++++++++++++++++++
 arch/arm/dts/imx6ul-opos6uldev.dts                        |  412
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6ul.dtsi                                  |    2 +
 arch/arm/dts/imx7ulp-evk.dts                              |  426
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx7ulp-pinfunc.h                            |  882
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx7ulp-uboot.dtsi                           |   43 +++++++
 arch/arm/dts/imx7ulp.dtsi                                 |  598
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/imx-common/Makefile                              |    4 +
 arch/arm/imx-common/hab.c                                 |    3 +-
 arch/arm/imx-common/init.c                                |   10 ++
 arch/arm/imx-common/spl.c                                 |   49 +++++---
 arch/arm/include/asm/arch-fsl-layerscape/imx-regs.h       |   42 -------
 arch/arm/include/asm/arch-imx/cpu.h                       |    2 +
 arch/arm/include/asm/arch-ls102xa/imx-regs.h              |   40 ------
 arch/arm/include/asm/arch-mx6/imx-regs.h                  |    2 +
 arch/arm/include/asm/arch-mx6/opos6ul.h                   |   16 +++
 arch/arm/include/asm/arch-mx7ulp/clock.h                  |   43 +++++++
 arch/arm/include/asm/arch-mx7ulp/gpio.h                   |   22 ++++
 arch/arm/include/asm/arch-mx7ulp/imx-regs.h               | 1120
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7ulp/imx_lpi2c.h              |  520
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7ulp/iomux.h                  |   95
++++++++++++++
 arch/arm/include/asm/arch-mx7ulp/mx7ulp-pins.h            |  910
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7ulp/pcc.h                    |  373
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7ulp/scg.h                    |  342
+++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7ulp/sys_proto.h              |   21 ++++
 arch/arm/include/asm/arch-vf610/clock.h                   |    1 +
 arch/arm/include/asm/arch-vf610/imx-regs.h                |   28 -----
 arch/arm/include/asm/imx-common/sys_proto.h               |   49 ++++++++
 board/armadeus/opos6uldev/Kconfig                         |   15 +++
 board/armadeus/opos6uldev/MAINTAINERS                     |    6 +
 board/armadeus/opos6uldev/Makefile                        |    6 +
 board/armadeus/opos6uldev/board.c                         |  125
+++++++++++++++++++
 board/engicam/geam6ul/MAINTAINERS                         |    1 +
 board/engicam/icorem6/MAINTAINERS                         |    3 +
 board/engicam/icorem6_rqs/MAINTAINERS                     |    3 +
 board/engicam/icorem6_rqs/icorem6_rqs.c                   |   96
++++++++++++++-
 board/engicam/isiotmx6ul/Kconfig                          |   12 ++
 board/engicam/isiotmx6ul/MAINTAINERS                      |   12 ++
 board/engicam/isiotmx6ul/Makefile                         |    6 +
 board/engicam/isiotmx6ul/README                           |   28 +++++
 board/engicam/isiotmx6ul/isiotmx6ul.c                     |  414
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/freescale/mx7ulp_evk/Kconfig                        |   12 ++
 board/freescale/mx7ulp_evk/MAINTAINERS                    |    7 ++
 board/freescale/mx7ulp_evk/Makefile                       |   10 ++
 board/freescale/mx7ulp_evk/imximage.cfg                   |  137
+++++++++++++++++++++
 board/freescale/mx7ulp_evk/mx7ulp_evk.c                   |   48 ++++++++
 board/freescale/mx7ulp_evk/plugin.S                       |  224
++++++++++++++++++++++++++++++++++
 board/freescale/vf610twr/Kconfig                          |    3 -
 board/gateworks/gw_ventana/README                         |   17 ++-
 board/gateworks/gw_ventana/common.c                       |   83
++++++++++---
 board/gateworks/gw_ventana/common.h                       |    4 +-
 board/gateworks/gw_ventana/gw_ventana.c                   |   43 +------
 board/gateworks/gw_ventana/gw_ventana_spl.c               |   45 +++++++
 board/phytec/pcm052/Kconfig                               |    6 -
 board/toradex/colibri_imx7/colibri_imx7.c                 |   57 +++++++++
 board/toradex/colibri_vf/Kconfig                          |    6 -
 board/tqc/tqma6/Kconfig                                   |    7 ++
 board/tqc/tqma6/README                                    |    3 +
 board/tqc/tqma6/tqma6.c                                   |   31 +++--
 board/tqc/tqma6/tqma6_mba6.c                              |   47 +++----
 board/tqc/tqma6/tqma6dl.cfg                               |  125
+++++++++++++++++++
 configs/apalis_imx6_defconfig                             |    3 +-
 configs/apalis_t30_defconfig                              |    7 +-
 configs/bk4r1_defconfig                                   |    1 +
 configs/colibri_imx6_defconfig                            |    3 +-
 configs/colibri_imx6_nospl_defconfig                      |    2 +-
 configs/colibri_imx7_defconfig                            |    4 +-
 configs/colibri_t20_defconfig                             |    7 +-
 configs/colibri_t30_defconfig                             |    7 +-
 configs/colibri_vf_defconfig                              |    4 +-
 configs/gwventana_emmc_defconfig                          |   63 ++++++++++
 configs/{gwventana_defconfig => gwventana_nand_defconfig} |    6 +-
 configs/imx6dl_icore_rqs_mmc_defconfig                    |    1 +
 configs/imx6q_icore_rqs_mmc_defconfig                     |    1 +
 configs/imx6ul_isiot_emmc_defconfig                       |   40 ++++++
 configs/imx6ul_isiot_mmc_defconfig                        |   42 +++++++
 configs/imx6ul_isiot_nand_defconfig                       |   43 +++++++
 configs/mx7ulp_evk_defconfig                              |   25 ++++
 configs/mx7ulp_evk_plugin_defconfig                       |   26 ++++
 configs/opos6uldev_defconfig                              |   85
+++++++++++++
 configs/pcm052_defconfig                                  |    1 +
 configs/tqma6dl_mba6_mmc_defconfig                        |   34 ++++++
 configs/tqma6dl_mba6_spi_defconfig                        |   35 ++++++
 configs/vf610twr_defconfig                                |    1 +
 configs/vf610twr_nand_defconfig                           |    1 +
 drivers/gpio/Kconfig                                      |    7 ++
 drivers/gpio/Makefile                                     |    1 +
 drivers/gpio/imx_rgpio2p.c                                |  224
++++++++++++++++++++++++++++++++++
 drivers/i2c/Kconfig                                       |    6 +
 drivers/i2c/Makefile                                      |    1 +
 drivers/i2c/imx_lpi2c.c                                   |  462
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/misc/mxc_ocotp.c                                  |   52 +++++++-
 drivers/mmc/fsl_esdhc.c                                   |    8 ++
 drivers/pinctrl/nxp/Kconfig                               |   14 +++
 drivers/pinctrl/nxp/Makefile                              |    1 +
 drivers/pinctrl/nxp/pinctrl-imx.c                         |   10 +-
 drivers/pinctrl/nxp/pinctrl-imx.h                         |    3 +
 drivers/pinctrl/nxp/pinctrl-imx7ulp.c                     |   41 +++++++
 drivers/serial/serial_lpuart.c                            |  336
+++++++++++++++++++++++++++++++++-----------------
 drivers/serial/serial_mxc.c                               |    1 +
 drivers/watchdog/Kconfig                                  |    8 ++
 drivers/watchdog/Makefile                                 |    1 +
 drivers/watchdog/ulp_wdog.c                               |   98
+++++++++++++++
 include/configs/apalis_imx6.h                             |    1 +
 include/configs/colibri_imx6.h                            |    1 +
 include/configs/colibri_imx7.h                            |    9 +-
 include/configs/colibri_vf.h                              |    1 -
 include/configs/gw_ventana.h                              |   13 +-
 include/configs/imx6qdl_icore.h                           |    2 +-
 include/configs/imx6qdl_icore_rqs.h                       |   36 +++---
 include/configs/imx6ul_geam.h                             |    2 +-
 include/configs/imx6ul_isiot.h                            |  199
++++++++++++++++++++++++++++++
 include/configs/mccmon6.h                                 |    4 +-
 include/configs/mx7ulp_evk.h                              |  198
++++++++++++++++++++++++++++++
 include/configs/opos6uldev.h                              |  219
+++++++++++++++++++++++++++++++++
 include/configs/pcm052.h                                  |    2 -
 include/configs/tqma6.h                                   |   16 +--
 include/configs/tqma6_mba6.h                              |    5 +-
 include/configs/vf610twr.h                                |    2 -
 include/dt-bindings/clock/imx7ulp-clock.h                 |  161
++++++++++++++++++++++++
 include/fsl_lpuart.h                                      |   72
+++++++++++
 tools/imximage.c                                          |   12 ++
 tools/imximage.h                                          |    4 +-
 145 files changed, 12951 insertions(+), 466 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/mx6/opos6ul.c
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/Kconfig
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/Makefile
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/clock.c
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/iomux.c
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/pcc.c
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/scg.c
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/soc.c
 create mode 100644 arch/arm/cpu/armv7/vf610/Kconfig
 create mode 100644 arch/arm/dts/imx6ul-isiot-emmc.dts
 create mode 100644 arch/arm/dts/imx6ul-isiot-mmc.dts
 create mode 100644 arch/arm/dts/imx6ul-isiot-nand.dts
 create mode 100644 arch/arm/dts/imx6ul-isiot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-opos6ul.dtsi
 create mode 100644 arch/arm/dts/imx6ul-opos6uldev.dts
 create mode 100644 arch/arm/dts/imx7ulp-evk.dts
 create mode 100644 arch/arm/dts/imx7ulp-pinfunc.h
 create mode 100644 arch/arm/dts/imx7ulp-uboot.dtsi
 create mode 100644 arch/arm/dts/imx7ulp.dtsi
 create mode 100644 arch/arm/include/asm/arch-mx6/opos6ul.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/clock.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/gpio.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/imx-regs.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/imx_lpi2c.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/iomux.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/mx7ulp-pins.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/pcc.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/scg.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/sys_proto.h
 create mode 100644 board/armadeus/opos6uldev/Kconfig
 create mode 100644 board/armadeus/opos6uldev/MAINTAINERS
 create mode 100644 board/armadeus/opos6uldev/Makefile
 create mode 100644 board/armadeus/opos6uldev/board.c
 create mode 100644 board/engicam/isiotmx6ul/Kconfig
 create mode 100644 board/engicam/isiotmx6ul/MAINTAINERS
 create mode 100644 board/engicam/isiotmx6ul/Makefile
 create mode 100644 board/engicam/isiotmx6ul/README
 create mode 100644 board/engicam/isiotmx6ul/isiotmx6ul.c
 create mode 100644 board/freescale/mx7ulp_evk/Kconfig
 create mode 100644 board/freescale/mx7ulp_evk/MAINTAINERS
 create mode 100644 board/freescale/mx7ulp_evk/Makefile
 create mode 100644 board/freescale/mx7ulp_evk/imximage.cfg
 create mode 100644 board/freescale/mx7ulp_evk/mx7ulp_evk.c
 create mode 100644 board/freescale/mx7ulp_evk/plugin.S
 create mode 100644 board/tqc/tqma6/tqma6dl.cfg
 create mode 100644 configs/gwventana_emmc_defconfig
 rename configs/{gwventana_defconfig => gwventana_nand_defconfig} (100%)
 create mode 100644 configs/imx6ul_isiot_emmc_defconfig
 create mode 100644 configs/imx6ul_isiot_mmc_defconfig
 create mode 100644 configs/imx6ul_isiot_nand_defconfig
 create mode 100644 configs/mx7ulp_evk_defconfig
 create mode 100644 configs/mx7ulp_evk_plugin_defconfig
 create mode 100644 configs/opos6uldev_defconfig
 create mode 100644 configs/tqma6dl_mba6_mmc_defconfig
 create mode 100644 configs/tqma6dl_mba6_spi_defconfig
 create mode 100644 drivers/gpio/imx_rgpio2p.c
 create mode 100644 drivers/i2c/imx_lpi2c.c
 create mode 100644 drivers/pinctrl/nxp/pinctrl-imx7ulp.c
 create mode 100644 drivers/watchdog/ulp_wdog.c
 create mode 100644 include/configs/imx6ul_isiot.h
 create mode 100644 include/configs/mx7ulp_evk.h
 create mode 100644 include/configs/opos6uldev.h
 create mode 100644 include/dt-bindings/clock/imx7ulp-clock.h
 create mode 100644 include/fsl_lpuart.h


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-02-27 17:08 Stefano Babic
@ 2017-03-01 15:38 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-03-01 15:38 UTC (permalink / raw)
  To: u-boot

On Mon, Feb 27, 2017 at 06:08:59PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> 
> The following changes since commit 66c246cce7c66019a93ff7105157c3e2126dd277:
> 
>   ARM: DRA7xx: Fix memory allocation overflow (2017-02-17 17:24:35 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to dc05e47a10b11f4266e3a41df96748d486193e6d:
> 
>   tqma6: [cosmetic] sanitize environment defines (2017-02-19 17:16:51 +0100)
> 

Applied prior to v2017.03-rc3 to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170301/9990aeb7/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-02-28  4:09 ` Jagan Teki
@ 2017-02-28 15:01   ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-02-28 15:01 UTC (permalink / raw)
  To: u-boot

On Tue, Feb 28, 2017 at 09:39:01AM +0530, Jagan Teki wrote:
> On Mon, Feb 27, 2017 at 2:42 PM, Stefano Babic <sbabic@denx.de> wrote:
> > Hi Tom,
> >
> > please pull from u-boot-imx, thanks !
> >
> > The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3:
> >
> >   video: mxsfb: Fix reset hang when videomode variable is not present
> > (2017-02-22 21:47:59 +0100)
> >
> > are available in the git repository at:
> >
> >   git://www.denx.de/git/u-boot-imx.git master
> >
> > for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8:
> >
> >   i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22
> > +0100)
> >
> > ----------------------------------------------------------------
> > Andrey Yurovsky (1):
> >       mtd: nand: build MXS driver for MX7 as well
> >
> > Jagan Teki (25):
> >       configs: imx6: Don't define USDHC2_BASE_ADDR
> >       arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support
> >       arm: dts: imx6ul-isiot: Add I2C nodes
> >       imx6: isiotmx6ul: Add I2C support
> >       arm: dts: imx6ul-isiot: Add FEC node
> >       imx6: isiotmx6ul: Add FEC support
> >       imx6: isiotmx6ul: Add NAND support
> >       imx6: isiotmx6ul: Add nandboot env support
> >       imx6ul: isiotmx6ul: Enable I2C support
> >       i.MX6: engicam: Include dts files under MAINTAINERS
> >       imx6: Add imx6_src_get_boot_mode
> >       imx: spl: Update NAND bootmode detection bit
> >       imx: Use IMX6_BMODE_* macros instead of numericals
> >       imx6: Add src_base structure define macro
> >       imx6: isiotmx6ul: Update SPL board boot order for eMMC
> >       i.MX6UL: isiot: Add eMMC boot support
> >       i.MX6UL: isiot: Add modeboot env via board_late_init
> >       i.MX6UL: isiot: Add mmc_late_init
> >       i.MX6UL: isiot: Switch the mmc env based on devno
> >       arm: dts: imx6qdl-icore-rqs: Add eMMC node
> >       imx6: icorem6_rqs: Update SPL board boot order for eMMC
> >       imx6: icorem6_rqs: Add eMMC boot support
> >       i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init
> >       i.MX6Q: icorem6_rqs: Add mmc_late_init
> >       i.MX6Q: isiot: Switch the mmc env based on devno
> 
> These patches were initiated during early on MW, any possibility to
> merge these as well?

As I was saying in my -rc3 release email, no.  The next window is just
around the corner.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170228/edf857bd/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-02-27  9:12 Stefano Babic
  2017-02-27 13:22 ` Tom Rini
@ 2017-02-28  4:09 ` Jagan Teki
  2017-02-28 15:01   ` Tom Rini
  1 sibling, 1 reply; 307+ messages in thread
From: Jagan Teki @ 2017-02-28  4:09 UTC (permalink / raw)
  To: u-boot

On Mon, Feb 27, 2017 at 2:42 PM, Stefano Babic <sbabic@denx.de> wrote:
> Hi Tom,
>
> please pull from u-boot-imx, thanks !
>
> The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3:
>
>   video: mxsfb: Fix reset hang when videomode variable is not present
> (2017-02-22 21:47:59 +0100)
>
> are available in the git repository at:
>
>   git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8:
>
>   i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22
> +0100)
>
> ----------------------------------------------------------------
> Andrey Yurovsky (1):
>       mtd: nand: build MXS driver for MX7 as well
>
> Jagan Teki (25):
>       configs: imx6: Don't define USDHC2_BASE_ADDR
>       arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support
>       arm: dts: imx6ul-isiot: Add I2C nodes
>       imx6: isiotmx6ul: Add I2C support
>       arm: dts: imx6ul-isiot: Add FEC node
>       imx6: isiotmx6ul: Add FEC support
>       imx6: isiotmx6ul: Add NAND support
>       imx6: isiotmx6ul: Add nandboot env support
>       imx6ul: isiotmx6ul: Enable I2C support
>       i.MX6: engicam: Include dts files under MAINTAINERS
>       imx6: Add imx6_src_get_boot_mode
>       imx: spl: Update NAND bootmode detection bit
>       imx: Use IMX6_BMODE_* macros instead of numericals
>       imx6: Add src_base structure define macro
>       imx6: isiotmx6ul: Update SPL board boot order for eMMC
>       i.MX6UL: isiot: Add eMMC boot support
>       i.MX6UL: isiot: Add modeboot env via board_late_init
>       i.MX6UL: isiot: Add mmc_late_init
>       i.MX6UL: isiot: Switch the mmc env based on devno
>       arm: dts: imx6qdl-icore-rqs: Add eMMC node
>       imx6: icorem6_rqs: Update SPL board boot order for eMMC
>       imx6: icorem6_rqs: Add eMMC boot support
>       i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init
>       i.MX6Q: icorem6_rqs: Add mmc_late_init
>       i.MX6Q: isiot: Switch the mmc env based on devno

These patches were initiated during early on MW, any possibility to
merge these as well?

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-02-27 17:08 Stefano Babic
  2017-03-01 15:38 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-02-27 17:08 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !


The following changes since commit 66c246cce7c66019a93ff7105157c3e2126dd277:

  ARM: DRA7xx: Fix memory allocation overflow (2017-02-17 17:24:35 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to dc05e47a10b11f4266e3a41df96748d486193e6d:

  tqma6: [cosmetic] sanitize environment defines (2017-02-19 17:16:51 +0100)

----------------------------------------------------------------
Andrey Yurovsky (1):
      mtd: nand: build MXS driver for MX7 as well

Markus Niebel (6):
      arm: imx6: tqma6: add configurable CMA size
      imx6: tqma6: rely on default setting for tftp and nfs
      mx6: tqma6: fix typo in env
      mx6: tqma6: add rootfsmode environment for mmc / sd
      tqma6: fix rounding in env
      tqma6: [cosmetic] sanitize environment defines

Peter Robinson (3):
      mx6sx: udoo_neo: Define the default serial console
      mx6sx: udoo_neo: use different load address for ramdisk
      mx6sx: udoo_neo: Enable distro boot options in config

 configs/udoo_neo_defconfig | 11 +----------
 drivers/mtd/nand/Kconfig   |  2 +-
 include/configs/tqma6.h    | 33 ++++++++++++++++++---------------
 include/configs/udoo_neo.h |  3 ++-
 4 files changed, 22 insertions(+), 27 deletions(-)


Best regards,
Stefano

-- 
Meet DENX at the Embedded World Trade Show
14 Mar - 16 Mar 2017, Nuremberg Trade Fair Centre, Hall 4, Booth 581
--
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-02-27 17:02       ` Stefano Babic
@ 2017-02-27 17:04         ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-02-27 17:04 UTC (permalink / raw)
  To: u-boot

On Mon, Feb 27, 2017 at 06:02:18PM +0100, Stefano Babic wrote:
> On 27/02/2017 17:41, Fabio Estevam wrote:
> > Hi Stefano,
> > 
> > On Mon, Feb 27, 2017 at 10:29 AM, Stefano Babic <sbabic@denx.de> wrote:
> > 
> >> ok - I push it to -next, and I send my PR again after release.
> > 
> > Peter Robinson's patches are bug fixes for mx6sx udoo neo to work
> > correctly with distro config.
> > 
> > Can we get them in for 2017.03?
> > 
> > Thanks
> > 
> 
> In the tree together with Peter's there are also Markus', just fixes and
> related to tqma6. I will propose I reset my tree to
> 76cb4dbc5c1d33d1f251af2553db47d88c3e6a45, this generate a small PR as:
> 
> The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3:
> 
>   video: mxsfb: Fix reset hang when videomode variable is not present
> (2017-02-22 21:47:59 +0100)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git
> 76cb4dbc5c1d33d1f251af2553db47d88c3e6a45
> 
> for you to fetch changes up to 76cb4dbc5c1d33d1f251af2553db47d88c3e6a45:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot (2017-02-25 18:52:37
> +0100)
> 
> ----------------------------------------------------------------
> Andrey Yurovsky (1):
>       mtd: nand: build MXS driver for MX7 as well
> 
> Markus Niebel (6):
>       arm: imx6: tqma6: add configurable CMA size
>       imx6: tqma6: rely on default setting for tftp and nfs
>       mx6: tqma6: fix typo in env
>       mx6: tqma6: add rootfsmode environment for mmc / sd
>       tqma6: fix rounding in env
>       tqma6: [cosmetic] sanitize environment defines
> 
> Peter Robinson (3):
>       mx6sx: udoo_neo: Define the default serial console
>       mx6sx: udoo_neo: use different load address for ramdisk
>       mx6sx: udoo_neo: Enable distro boot options in config
> 
> Stefano Babic (1):
>       Merge branch 'master' of git://git.denx.de/u-boot
> 
> 
> Tom, should this ok ?

Drop the merge commit and then yes, looks reasonable, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170227/aa05859b/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-02-27 16:41     ` Fabio Estevam
@ 2017-02-27 17:02       ` Stefano Babic
  2017-02-27 17:04         ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-02-27 17:02 UTC (permalink / raw)
  To: u-boot

On 27/02/2017 17:41, Fabio Estevam wrote:
> Hi Stefano,
> 
> On Mon, Feb 27, 2017 at 10:29 AM, Stefano Babic <sbabic@denx.de> wrote:
> 
>> ok - I push it to -next, and I send my PR again after release.
> 
> Peter Robinson's patches are bug fixes for mx6sx udoo neo to work
> correctly with distro config.
> 
> Can we get them in for 2017.03?
> 
> Thanks
> 

In the tree together with Peter's there are also Markus', just fixes and
related to tqma6. I will propose I reset my tree to
76cb4dbc5c1d33d1f251af2553db47d88c3e6a45, this generate a small PR as:

The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3:

  video: mxsfb: Fix reset hang when videomode variable is not present
(2017-02-22 21:47:59 +0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git
76cb4dbc5c1d33d1f251af2553db47d88c3e6a45

for you to fetch changes up to 76cb4dbc5c1d33d1f251af2553db47d88c3e6a45:

  Merge branch 'master' of git://git.denx.de/u-boot (2017-02-25 18:52:37
+0100)

----------------------------------------------------------------
Andrey Yurovsky (1):
      mtd: nand: build MXS driver for MX7 as well

Markus Niebel (6):
      arm: imx6: tqma6: add configurable CMA size
      imx6: tqma6: rely on default setting for tftp and nfs
      mx6: tqma6: fix typo in env
      mx6: tqma6: add rootfsmode environment for mmc / sd
      tqma6: fix rounding in env
      tqma6: [cosmetic] sanitize environment defines

Peter Robinson (3):
      mx6sx: udoo_neo: Define the default serial console
      mx6sx: udoo_neo: use different load address for ramdisk
      mx6sx: udoo_neo: Enable distro boot options in config

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot


Tom, should this ok ?

Stefano

-- 
Meet DENX at the Embedded World Trade Show
14 Mar - 16 Mar 2017, Nuremberg Trade Fair Centre, Hall 4, Booth 581
--
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-02-27 13:29   ` Stefano Babic
  2017-02-27 13:30     ` Tom Rini
  2017-02-27 16:05     ` Peter Robinson
@ 2017-02-27 16:41     ` Fabio Estevam
  2017-02-27 17:02       ` Stefano Babic
  2 siblings, 1 reply; 307+ messages in thread
From: Fabio Estevam @ 2017-02-27 16:41 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Mon, Feb 27, 2017 at 10:29 AM, Stefano Babic <sbabic@denx.de> wrote:

> ok - I push it to -next, and I send my PR again after release.

Peter Robinson's patches are bug fixes for mx6sx udoo neo to work
correctly with distro config.

Can we get them in for 2017.03?

Thanks

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-02-27 13:29   ` Stefano Babic
  2017-02-27 13:30     ` Tom Rini
@ 2017-02-27 16:05     ` Peter Robinson
  2017-02-27 16:41     ` Fabio Estevam
  2 siblings, 0 replies; 307+ messages in thread
From: Peter Robinson @ 2017-02-27 16:05 UTC (permalink / raw)
  To: u-boot

On Mon, Feb 27, 2017 at 1:29 PM, Stefano Babic <sbabic@denx.de> wrote:
> On 27/02/2017 14:22, Tom Rini wrote:
>> On Mon, Feb 27, 2017 at 10:12:59AM +0100, Stefano Babic wrote:
>>> Hi Tom,
>>>
>>> please pull from u-boot-imx, thanks !
>>>
>>> The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3:
>>>
>>>   video: mxsfb: Fix reset hang when videomode variable is not present
>>> (2017-02-22 21:47:59 +0100)
>>>
>>> are available in the git repository at:
>>>
>>>   git://www.denx.de/git/u-boot-imx.git master
>>>
>>> for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8:
>>>
>>>   i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22
>>> +0100)
>>>
>>> ----------------------------------------------------------------
>
>>
>> This is too much too close to the release window, sorry.
>>
>
> ok - I push it to -next, and I send my PR again after release.

Maybe do a more focuses -fixes PR?

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-02-27 13:29   ` Stefano Babic
@ 2017-02-27 13:30     ` Tom Rini
  2017-02-27 16:05     ` Peter Robinson
  2017-02-27 16:41     ` Fabio Estevam
  2 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-02-27 13:30 UTC (permalink / raw)
  To: u-boot

On Mon, Feb 27, 2017 at 02:29:38PM +0100, Stefano Babic wrote:
> On 27/02/2017 14:22, Tom Rini wrote:
> > On Mon, Feb 27, 2017 at 10:12:59AM +0100, Stefano Babic wrote:
> >> Hi Tom,
> >>
> >> please pull from u-boot-imx, thanks !
> >>
> >> The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3:
> >>
> >>   video: mxsfb: Fix reset hang when videomode variable is not present
> >> (2017-02-22 21:47:59 +0100)
> >>
> >> are available in the git repository at:
> >>
> >>   git://www.denx.de/git/u-boot-imx.git master
> >>
> >> for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8:
> >>
> >>   i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22
> >> +0100)
> >>
> >> ----------------------------------------------------------------
> 
> > 
> > This is too much too close to the release window, sorry.
> > 
> 
> ok - I push it to -next, and I send my PR again after release.

Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170227/170aba3e/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-02-27 13:22 ` Tom Rini
@ 2017-02-27 13:29   ` Stefano Babic
  2017-02-27 13:30     ` Tom Rini
                       ` (2 more replies)
  0 siblings, 3 replies; 307+ messages in thread
From: Stefano Babic @ 2017-02-27 13:29 UTC (permalink / raw)
  To: u-boot

On 27/02/2017 14:22, Tom Rini wrote:
> On Mon, Feb 27, 2017 at 10:12:59AM +0100, Stefano Babic wrote:
>> Hi Tom,
>>
>> please pull from u-boot-imx, thanks !
>>
>> The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3:
>>
>>   video: mxsfb: Fix reset hang when videomode variable is not present
>> (2017-02-22 21:47:59 +0100)
>>
>> are available in the git repository at:
>>
>>   git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8:
>>
>>   i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22
>> +0100)
>>
>> ----------------------------------------------------------------

> 
> This is too much too close to the release window, sorry.
> 

ok - I push it to -next, and I send my PR again after release.

Regards,
Stefano


-- 
Meet DENX at the Embedded World Trade Show
14 Mar - 16 Mar 2017, Nuremberg Trade Fair Centre, Hall 4, Booth 581
--
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-02-27  9:12 Stefano Babic
@ 2017-02-27 13:22 ` Tom Rini
  2017-02-27 13:29   ` Stefano Babic
  2017-02-28  4:09 ` Jagan Teki
  1 sibling, 1 reply; 307+ messages in thread
From: Tom Rini @ 2017-02-27 13:22 UTC (permalink / raw)
  To: u-boot

On Mon, Feb 27, 2017 at 10:12:59AM +0100, Stefano Babic wrote:
> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3:
> 
>   video: mxsfb: Fix reset hang when videomode variable is not present
> (2017-02-22 21:47:59 +0100)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8:
> 
>   i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22
> +0100)
> 
> ----------------------------------------------------------------
> Andrey Yurovsky (1):
>       mtd: nand: build MXS driver for MX7 as well
> 
> Jagan Teki (25):
>       configs: imx6: Don't define USDHC2_BASE_ADDR
>       arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support
>       arm: dts: imx6ul-isiot: Add I2C nodes
>       imx6: isiotmx6ul: Add I2C support
>       arm: dts: imx6ul-isiot: Add FEC node
>       imx6: isiotmx6ul: Add FEC support
>       imx6: isiotmx6ul: Add NAND support
>       imx6: isiotmx6ul: Add nandboot env support
>       imx6ul: isiotmx6ul: Enable I2C support
>       i.MX6: engicam: Include dts files under MAINTAINERS
>       imx6: Add imx6_src_get_boot_mode
>       imx: spl: Update NAND bootmode detection bit
>       imx: Use IMX6_BMODE_* macros instead of numericals
>       imx6: Add src_base structure define macro
>       imx6: isiotmx6ul: Update SPL board boot order for eMMC
>       i.MX6UL: isiot: Add eMMC boot support
>       i.MX6UL: isiot: Add modeboot env via board_late_init
>       i.MX6UL: isiot: Add mmc_late_init
>       i.MX6UL: isiot: Switch the mmc env based on devno
>       arm: dts: imx6qdl-icore-rqs: Add eMMC node
>       imx6: icorem6_rqs: Update SPL board boot order for eMMC
>       imx6: icorem6_rqs: Add eMMC boot support
>       i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init
>       i.MX6Q: icorem6_rqs: Add mmc_late_init
>       i.MX6Q: isiot: Switch the mmc env based on devno
> 
> Markus Niebel (13):
>       arm: imx6: tqma6: add configurable CMA size
>       imx6: tqma6: rely on default setting for tftp and nfs
>       mx6: tqma6: fix typo in env
>       mx6: tqma6: add rootfsmode environment for mmc / sd
>       tqma6: fix rounding in env
>       tqma6: [cosmetic] sanitize environment defines
>       arm: imx6: tqma6: use CONFIG_TQM6x for SOM specific settings
>       arm: imx6: tqma6: add support for TQMa6DL variant
>       imx6: tqma6: implement power_init_board
>       imx6: tqma6: use lower driver stength for I2C pins
>       imx6: tqma6: disable spi CS unused in U-Boot
>       imx6: tqma6: adjust ethernet phy reset delay
>       mx6: tqma6: clear enet clk sel for mba6
> 
> Peng Fan (16):
>       imx: mx7ulp: Add mx7ulp to Kconfig
>       imx: mx7ulp: add registers header file
>       imx: mx7ulp: add iomux driver to support IOMUXC0 and IOMUXC1
>       imx: mx7ulp: Add clock framework and functions
>       imx: mx7ulp: Add soc level initialization codes and functions
>       gpio: Add Rapid GPIO2P driver for i.MX7ULP
>       mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULP
>       pinctrl: Add i.MX7ULP pinctrl driver
>       i2c: lpi2c: add lpi2c driver for i.MX7ULP
>       serial: lpuart: restructure lpuart driver
>       serial: lpuart: add i.MX7ULP support
>       mx7ulp: Add HAB boot support
>       arm: dts: add i.MX7ULP dtsi file
>       mmc: fsl_esdhc: support i.MX7ULP
>       imx: imx7ulp: add EVK board support
>       imx: mx7ulp_evk: enable mmc/regulator support
> 
> Peter Robinson (3):
>       mx6sx: udoo_neo: Define the default serial console
>       mx6sx: udoo_neo: use different load address for ramdisk
>       mx6sx: udoo_neo: Enable distro boot options in config
> 
> Stefano Babic (1):
>       Merge branch 'master' of git://git.denx.de/u-boot
> 
> Ye Li (3):
>       imx: mx7ulp: Implement the clock functions for i2c driver
>       mx7ulp: Add iomux pins header file
>       wdog: Add the watchdog driver for MX7ULP.
> 
>  arch/arm/Kconfig                                    |    7 +
>  arch/arm/Makefile                                   |    2 +-
>  arch/arm/cpu/armv7/Makefile                         |    3 +-
>  arch/arm/cpu/armv7/mx6/Kconfig                      |   12 +
>  arch/arm/cpu/armv7/mx7ulp/Kconfig                   |   17 ++
>  arch/arm/cpu/armv7/mx7ulp/Makefile                  |    8 +
>  arch/arm/cpu/armv7/mx7ulp/clock.c                   |  365
> +++++++++++++++++++++++++++
>  arch/arm/cpu/armv7/mx7ulp/iomux.c                   |   70 ++++++
>  arch/arm/cpu/armv7/mx7ulp/pcc.c                     |  286
> +++++++++++++++++++++
>  arch/arm/cpu/armv7/mx7ulp/scg.c                     | 1086
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/cpu/armv7/mx7ulp/soc.c                     |  247
> ++++++++++++++++++
>  arch/arm/cpu/armv7/vf610/generic.c                  |    5 +
>  arch/arm/dts/Makefile                               |    7 +-
>  arch/arm/dts/imx6qdl-icore-rqs.dtsi                 |   22 ++
>  arch/arm/dts/imx6ul-isiot-emmc.dts                  |   77 ++++++
>  arch/arm/dts/imx6ul-isiot-mmc.dts                   |   50 ++++
>  arch/arm/dts/imx6ul-isiot-nand.dts                  |   50 ++++
>  arch/arm/dts/imx6ul-isiot.dtsi                      |  142 +++++++++++
>  arch/arm/dts/imx7ulp-evk.dts                        |  426
> +++++++++++++++++++++++++++++++
>  arch/arm/dts/imx7ulp-pinfunc.h                      |  882
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/dts/imx7ulp-uboot.dtsi                     |   43 ++++
>  arch/arm/dts/imx7ulp.dtsi                           |  598
> +++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/imx-common/Makefile                        |    4 +
>  arch/arm/imx-common/hab.c                           |    3 +-
>  arch/arm/imx-common/init.c                          |   10 +
>  arch/arm/imx-common/spl.c                           |   49 ++--
>  arch/arm/include/asm/arch-fsl-layerscape/imx-regs.h |   42 ----
>  arch/arm/include/asm/arch-imx/cpu.h                 |    2 +
>  arch/arm/include/asm/arch-ls102xa/imx-regs.h        |   40 ---
>  arch/arm/include/asm/arch-mx6/imx-regs.h            |    2 +
>  arch/arm/include/asm/arch-mx7ulp/clock.h            |   43 ++++
>  arch/arm/include/asm/arch-mx7ulp/gpio.h             |   22 ++
>  arch/arm/include/asm/arch-mx7ulp/imx-regs.h         | 1120
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/include/asm/arch-mx7ulp/imx_lpi2c.h        |  520
> ++++++++++++++++++++++++++++++++++++++
>  arch/arm/include/asm/arch-mx7ulp/iomux.h            |   95 +++++++
>  arch/arm/include/asm/arch-mx7ulp/mx7ulp-pins.h      |  910
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/include/asm/arch-mx7ulp/pcc.h              |  373
> +++++++++++++++++++++++++++
>  arch/arm/include/asm/arch-mx7ulp/scg.h              |  342
> +++++++++++++++++++++++++
>  arch/arm/include/asm/arch-mx7ulp/sys_proto.h        |   21 ++
>  arch/arm/include/asm/arch-vf610/clock.h             |    1 +
>  arch/arm/include/asm/arch-vf610/imx-regs.h          |   28 ---
>  arch/arm/include/asm/imx-common/sys_proto.h         |   49 ++++
>  board/engicam/geam6ul/MAINTAINERS                   |    1 +
>  board/engicam/icorem6/MAINTAINERS                   |    3 +
>  board/engicam/icorem6_rqs/MAINTAINERS               |    3 +
>  board/engicam/icorem6_rqs/icorem6_rqs.c             |   96 ++++++-
>  board/engicam/isiotmx6ul/Kconfig                    |   12 +
>  board/engicam/isiotmx6ul/MAINTAINERS                |   12 +
>  board/engicam/isiotmx6ul/Makefile                   |    6 +
>  board/engicam/isiotmx6ul/README                     |   28 +++
>  board/engicam/isiotmx6ul/isiotmx6ul.c               |  414
> ++++++++++++++++++++++++++++++
>  board/freescale/mx7ulp_evk/Kconfig                  |   12 +
>  board/freescale/mx7ulp_evk/MAINTAINERS              |    7 +
>  board/freescale/mx7ulp_evk/Makefile                 |   10 +
>  board/freescale/mx7ulp_evk/imximage.cfg             |  137 ++++++++++
>  board/freescale/mx7ulp_evk/mx7ulp_evk.c             |   48 ++++
>  board/freescale/mx7ulp_evk/plugin.S                 |  224
> +++++++++++++++++
>  board/tqc/tqma6/Kconfig                             |    7 +
>  board/tqc/tqma6/README                              |    3 +
>  board/tqc/tqma6/tqma6.c                             |   31 ++-
>  board/tqc/tqma6/tqma6_mba6.c                        |   47 ++--
>  board/tqc/tqma6/tqma6dl.cfg                         |  125 +++++++++
>  configs/imx6dl_icore_rqs_mmc_defconfig              |    1 +
>  configs/imx6q_icore_rqs_mmc_defconfig               |    1 +
>  configs/imx6ul_isiot_emmc_defconfig                 |   40 +++
>  configs/imx6ul_isiot_mmc_defconfig                  |   42 ++++
>  configs/imx6ul_isiot_nand_defconfig                 |   43 ++++
>  configs/mx7ulp_evk_defconfig                        |   25 ++
>  configs/mx7ulp_evk_plugin_defconfig                 |   26 ++
>  configs/tqma6dl_mba6_mmc_defconfig                  |   36 +++
>  configs/tqma6dl_mba6_spi_defconfig                  |   37 +++
>  configs/udoo_neo_defconfig                          |   11 +-
>  drivers/gpio/Kconfig                                |    7 +
>  drivers/gpio/Makefile                               |    1 +
>  drivers/gpio/imx_rgpio2p.c                          |  224
> +++++++++++++++++
>  drivers/i2c/Kconfig                                 |    6 +
>  drivers/i2c/Makefile                                |    1 +
>  drivers/i2c/imx_lpi2c.c                             |  462
> ++++++++++++++++++++++++++++++++++
>  drivers/misc/mxc_ocotp.c                            |   52 +++-
>  drivers/mmc/fsl_esdhc.c                             |    8 +
>  drivers/mtd/nand/Kconfig                            |    2 +-
>  drivers/pinctrl/nxp/Kconfig                         |   14 ++
>  drivers/pinctrl/nxp/Makefile                        |    1 +
>  drivers/pinctrl/nxp/pinctrl-imx.c                   |   10 +-
>  drivers/pinctrl/nxp/pinctrl-imx.h                   |    3 +
>  drivers/pinctrl/nxp/pinctrl-imx7ulp.c               |   41 +++
>  drivers/serial/serial_lpuart.c                      |  336
> ++++++++++++++++---------
>  drivers/watchdog/Kconfig                            |    8 +
>  drivers/watchdog/Makefile                           |    1 +
>  drivers/watchdog/ulp_wdog.c                         |   98 ++++++++
>  include/configs/imx6qdl_icore.h                     |    2 +-
>  include/configs/imx6qdl_icore_rqs.h                 |   36 ++-
>  include/configs/imx6ul_geam.h                       |    2 +-
>  include/configs/imx6ul_isiot.h                      |  199 +++++++++++++++
>  include/configs/mx7ulp_evk.h                        |  198 +++++++++++++++
>  include/configs/tqma6.h                             |   49 ++--
>  include/configs/tqma6_mba6.h                        |    5 +-
>  include/configs/udoo_neo.h                          |    3 +-
>  include/dt-bindings/clock/imx7ulp-clock.h           |  161 ++++++++++++
>  include/fsl_lpuart.h                                |   72 ++++++
>  100 files changed, 11219 insertions(+), 352 deletions(-)

This is too much too close to the release window, sorry.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170227/7752ae5b/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-02-27  9:12 Stefano Babic
  2017-02-27 13:22 ` Tom Rini
  2017-02-28  4:09 ` Jagan Teki
  0 siblings, 2 replies; 307+ messages in thread
From: Stefano Babic @ 2017-02-27  9:12 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3:

  video: mxsfb: Fix reset hang when videomode variable is not present
(2017-02-22 21:47:59 +0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8:

  i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22
+0100)

----------------------------------------------------------------
Andrey Yurovsky (1):
      mtd: nand: build MXS driver for MX7 as well

Jagan Teki (25):
      configs: imx6: Don't define USDHC2_BASE_ADDR
      arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support
      arm: dts: imx6ul-isiot: Add I2C nodes
      imx6: isiotmx6ul: Add I2C support
      arm: dts: imx6ul-isiot: Add FEC node
      imx6: isiotmx6ul: Add FEC support
      imx6: isiotmx6ul: Add NAND support
      imx6: isiotmx6ul: Add nandboot env support
      imx6ul: isiotmx6ul: Enable I2C support
      i.MX6: engicam: Include dts files under MAINTAINERS
      imx6: Add imx6_src_get_boot_mode
      imx: spl: Update NAND bootmode detection bit
      imx: Use IMX6_BMODE_* macros instead of numericals
      imx6: Add src_base structure define macro
      imx6: isiotmx6ul: Update SPL board boot order for eMMC
      i.MX6UL: isiot: Add eMMC boot support
      i.MX6UL: isiot: Add modeboot env via board_late_init
      i.MX6UL: isiot: Add mmc_late_init
      i.MX6UL: isiot: Switch the mmc env based on devno
      arm: dts: imx6qdl-icore-rqs: Add eMMC node
      imx6: icorem6_rqs: Update SPL board boot order for eMMC
      imx6: icorem6_rqs: Add eMMC boot support
      i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init
      i.MX6Q: icorem6_rqs: Add mmc_late_init
      i.MX6Q: isiot: Switch the mmc env based on devno

Markus Niebel (13):
      arm: imx6: tqma6: add configurable CMA size
      imx6: tqma6: rely on default setting for tftp and nfs
      mx6: tqma6: fix typo in env
      mx6: tqma6: add rootfsmode environment for mmc / sd
      tqma6: fix rounding in env
      tqma6: [cosmetic] sanitize environment defines
      arm: imx6: tqma6: use CONFIG_TQM6x for SOM specific settings
      arm: imx6: tqma6: add support for TQMa6DL variant
      imx6: tqma6: implement power_init_board
      imx6: tqma6: use lower driver stength for I2C pins
      imx6: tqma6: disable spi CS unused in U-Boot
      imx6: tqma6: adjust ethernet phy reset delay
      mx6: tqma6: clear enet clk sel for mba6

Peng Fan (16):
      imx: mx7ulp: Add mx7ulp to Kconfig
      imx: mx7ulp: add registers header file
      imx: mx7ulp: add iomux driver to support IOMUXC0 and IOMUXC1
      imx: mx7ulp: Add clock framework and functions
      imx: mx7ulp: Add soc level initialization codes and functions
      gpio: Add Rapid GPIO2P driver for i.MX7ULP
      mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULP
      pinctrl: Add i.MX7ULP pinctrl driver
      i2c: lpi2c: add lpi2c driver for i.MX7ULP
      serial: lpuart: restructure lpuart driver
      serial: lpuart: add i.MX7ULP support
      mx7ulp: Add HAB boot support
      arm: dts: add i.MX7ULP dtsi file
      mmc: fsl_esdhc: support i.MX7ULP
      imx: imx7ulp: add EVK board support
      imx: mx7ulp_evk: enable mmc/regulator support

Peter Robinson (3):
      mx6sx: udoo_neo: Define the default serial console
      mx6sx: udoo_neo: use different load address for ramdisk
      mx6sx: udoo_neo: Enable distro boot options in config

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot

Ye Li (3):
      imx: mx7ulp: Implement the clock functions for i2c driver
      mx7ulp: Add iomux pins header file
      wdog: Add the watchdog driver for MX7ULP.

 arch/arm/Kconfig                                    |    7 +
 arch/arm/Makefile                                   |    2 +-
 arch/arm/cpu/armv7/Makefile                         |    3 +-
 arch/arm/cpu/armv7/mx6/Kconfig                      |   12 +
 arch/arm/cpu/armv7/mx7ulp/Kconfig                   |   17 ++
 arch/arm/cpu/armv7/mx7ulp/Makefile                  |    8 +
 arch/arm/cpu/armv7/mx7ulp/clock.c                   |  365
+++++++++++++++++++++++++++
 arch/arm/cpu/armv7/mx7ulp/iomux.c                   |   70 ++++++
 arch/arm/cpu/armv7/mx7ulp/pcc.c                     |  286
+++++++++++++++++++++
 arch/arm/cpu/armv7/mx7ulp/scg.c                     | 1086
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/mx7ulp/soc.c                     |  247
++++++++++++++++++
 arch/arm/cpu/armv7/vf610/generic.c                  |    5 +
 arch/arm/dts/Makefile                               |    7 +-
 arch/arm/dts/imx6qdl-icore-rqs.dtsi                 |   22 ++
 arch/arm/dts/imx6ul-isiot-emmc.dts                  |   77 ++++++
 arch/arm/dts/imx6ul-isiot-mmc.dts                   |   50 ++++
 arch/arm/dts/imx6ul-isiot-nand.dts                  |   50 ++++
 arch/arm/dts/imx6ul-isiot.dtsi                      |  142 +++++++++++
 arch/arm/dts/imx7ulp-evk.dts                        |  426
+++++++++++++++++++++++++++++++
 arch/arm/dts/imx7ulp-pinfunc.h                      |  882
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx7ulp-uboot.dtsi                     |   43 ++++
 arch/arm/dts/imx7ulp.dtsi                           |  598
+++++++++++++++++++++++++++++++++++++++++++
 arch/arm/imx-common/Makefile                        |    4 +
 arch/arm/imx-common/hab.c                           |    3 +-
 arch/arm/imx-common/init.c                          |   10 +
 arch/arm/imx-common/spl.c                           |   49 ++--
 arch/arm/include/asm/arch-fsl-layerscape/imx-regs.h |   42 ----
 arch/arm/include/asm/arch-imx/cpu.h                 |    2 +
 arch/arm/include/asm/arch-ls102xa/imx-regs.h        |   40 ---
 arch/arm/include/asm/arch-mx6/imx-regs.h            |    2 +
 arch/arm/include/asm/arch-mx7ulp/clock.h            |   43 ++++
 arch/arm/include/asm/arch-mx7ulp/gpio.h             |   22 ++
 arch/arm/include/asm/arch-mx7ulp/imx-regs.h         | 1120
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7ulp/imx_lpi2c.h        |  520
++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7ulp/iomux.h            |   95 +++++++
 arch/arm/include/asm/arch-mx7ulp/mx7ulp-pins.h      |  910
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7ulp/pcc.h              |  373
+++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7ulp/scg.h              |  342
+++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7ulp/sys_proto.h        |   21 ++
 arch/arm/include/asm/arch-vf610/clock.h             |    1 +
 arch/arm/include/asm/arch-vf610/imx-regs.h          |   28 ---
 arch/arm/include/asm/imx-common/sys_proto.h         |   49 ++++
 board/engicam/geam6ul/MAINTAINERS                   |    1 +
 board/engicam/icorem6/MAINTAINERS                   |    3 +
 board/engicam/icorem6_rqs/MAINTAINERS               |    3 +
 board/engicam/icorem6_rqs/icorem6_rqs.c             |   96 ++++++-
 board/engicam/isiotmx6ul/Kconfig                    |   12 +
 board/engicam/isiotmx6ul/MAINTAINERS                |   12 +
 board/engicam/isiotmx6ul/Makefile                   |    6 +
 board/engicam/isiotmx6ul/README                     |   28 +++
 board/engicam/isiotmx6ul/isiotmx6ul.c               |  414
++++++++++++++++++++++++++++++
 board/freescale/mx7ulp_evk/Kconfig                  |   12 +
 board/freescale/mx7ulp_evk/MAINTAINERS              |    7 +
 board/freescale/mx7ulp_evk/Makefile                 |   10 +
 board/freescale/mx7ulp_evk/imximage.cfg             |  137 ++++++++++
 board/freescale/mx7ulp_evk/mx7ulp_evk.c             |   48 ++++
 board/freescale/mx7ulp_evk/plugin.S                 |  224
+++++++++++++++++
 board/tqc/tqma6/Kconfig                             |    7 +
 board/tqc/tqma6/README                              |    3 +
 board/tqc/tqma6/tqma6.c                             |   31 ++-
 board/tqc/tqma6/tqma6_mba6.c                        |   47 ++--
 board/tqc/tqma6/tqma6dl.cfg                         |  125 +++++++++
 configs/imx6dl_icore_rqs_mmc_defconfig              |    1 +
 configs/imx6q_icore_rqs_mmc_defconfig               |    1 +
 configs/imx6ul_isiot_emmc_defconfig                 |   40 +++
 configs/imx6ul_isiot_mmc_defconfig                  |   42 ++++
 configs/imx6ul_isiot_nand_defconfig                 |   43 ++++
 configs/mx7ulp_evk_defconfig                        |   25 ++
 configs/mx7ulp_evk_plugin_defconfig                 |   26 ++
 configs/tqma6dl_mba6_mmc_defconfig                  |   36 +++
 configs/tqma6dl_mba6_spi_defconfig                  |   37 +++
 configs/udoo_neo_defconfig                          |   11 +-
 drivers/gpio/Kconfig                                |    7 +
 drivers/gpio/Makefile                               |    1 +
 drivers/gpio/imx_rgpio2p.c                          |  224
+++++++++++++++++
 drivers/i2c/Kconfig                                 |    6 +
 drivers/i2c/Makefile                                |    1 +
 drivers/i2c/imx_lpi2c.c                             |  462
++++++++++++++++++++++++++++++++++
 drivers/misc/mxc_ocotp.c                            |   52 +++-
 drivers/mmc/fsl_esdhc.c                             |    8 +
 drivers/mtd/nand/Kconfig                            |    2 +-
 drivers/pinctrl/nxp/Kconfig                         |   14 ++
 drivers/pinctrl/nxp/Makefile                        |    1 +
 drivers/pinctrl/nxp/pinctrl-imx.c                   |   10 +-
 drivers/pinctrl/nxp/pinctrl-imx.h                   |    3 +
 drivers/pinctrl/nxp/pinctrl-imx7ulp.c               |   41 +++
 drivers/serial/serial_lpuart.c                      |  336
++++++++++++++++---------
 drivers/watchdog/Kconfig                            |    8 +
 drivers/watchdog/Makefile                           |    1 +
 drivers/watchdog/ulp_wdog.c                         |   98 ++++++++
 include/configs/imx6qdl_icore.h                     |    2 +-
 include/configs/imx6qdl_icore_rqs.h                 |   36 ++-
 include/configs/imx6ul_geam.h                       |    2 +-
 include/configs/imx6ul_isiot.h                      |  199 +++++++++++++++
 include/configs/mx7ulp_evk.h                        |  198 +++++++++++++++
 include/configs/tqma6.h                             |   49 ++--
 include/configs/tqma6_mba6.h                        |    5 +-
 include/configs/udoo_neo.h                          |    3 +-
 include/dt-bindings/clock/imx7ulp-clock.h           |  161 ++++++++++++
 include/fsl_lpuart.h                                |   72 ++++++
 100 files changed, 11219 insertions(+), 352 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/Kconfig
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/Makefile
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/clock.c
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/iomux.c
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/pcc.c
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/scg.c
 create mode 100644 arch/arm/cpu/armv7/mx7ulp/soc.c
 create mode 100644 arch/arm/dts/imx6ul-isiot-emmc.dts
 create mode 100644 arch/arm/dts/imx6ul-isiot-mmc.dts
 create mode 100644 arch/arm/dts/imx6ul-isiot-nand.dts
 create mode 100644 arch/arm/dts/imx6ul-isiot.dtsi
 create mode 100644 arch/arm/dts/imx7ulp-evk.dts
 create mode 100644 arch/arm/dts/imx7ulp-pinfunc.h
 create mode 100644 arch/arm/dts/imx7ulp-uboot.dtsi
 create mode 100644 arch/arm/dts/imx7ulp.dtsi
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/clock.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/gpio.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/imx-regs.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/imx_lpi2c.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/iomux.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/mx7ulp-pins.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/pcc.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/scg.h
 create mode 100644 arch/arm/include/asm/arch-mx7ulp/sys_proto.h
 create mode 100644 board/engicam/isiotmx6ul/Kconfig
 create mode 100644 board/engicam/isiotmx6ul/MAINTAINERS
 create mode 100644 board/engicam/isiotmx6ul/Makefile
 create mode 100644 board/engicam/isiotmx6ul/README
 create mode 100644 board/engicam/isiotmx6ul/isiotmx6ul.c
 create mode 100644 board/freescale/mx7ulp_evk/Kconfig
 create mode 100644 board/freescale/mx7ulp_evk/MAINTAINERS
 create mode 100644 board/freescale/mx7ulp_evk/Makefile
 create mode 100644 board/freescale/mx7ulp_evk/imximage.cfg
 create mode 100644 board/freescale/mx7ulp_evk/mx7ulp_evk.c
 create mode 100644 board/freescale/mx7ulp_evk/plugin.S
 create mode 100644 board/tqc/tqma6/tqma6dl.cfg
 create mode 100644 configs/imx6ul_isiot_emmc_defconfig
 create mode 100644 configs/imx6ul_isiot_mmc_defconfig
 create mode 100644 configs/imx6ul_isiot_nand_defconfig
 create mode 100644 configs/mx7ulp_evk_defconfig
 create mode 100644 configs/mx7ulp_evk_plugin_defconfig
 create mode 100644 configs/tqma6dl_mba6_mmc_defconfig
 create mode 100644 configs/tqma6dl_mba6_spi_defconfig
 create mode 100644 drivers/gpio/imx_rgpio2p.c
 create mode 100644 drivers/i2c/imx_lpi2c.c
 create mode 100644 drivers/pinctrl/nxp/pinctrl-imx7ulp.c
 create mode 100644 drivers/watchdog/ulp_wdog.c
 create mode 100644 include/configs/imx6ul_isiot.h
 create mode 100644 include/configs/mx7ulp_evk.h
 create mode 100644 include/dt-bindings/clock/imx7ulp-clock.h
 create mode 100644 include/fsl_lpuart.h

Best regards,
Stefano


-- 
Meet DENX at the Embedded World Trade Show
14 Mar - 16 Mar 2017, Nuremberg Trade Fair Centre, Hall 4, Booth 581
--
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-02-01 15:50 Stefano Babic
@ 2017-02-02  3:20 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-02-02  3:20 UTC (permalink / raw)
  To: u-boot

On Wed, Feb 01, 2017 at 04:50:30PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit cf4128e53caa4f7b0a6586fc3f10690d5c05db31:
> 
>   Merge git://www.denx.de/git/u-boot-marvell (2017-01-26 12:26:24 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 11bd5e7b62070c7ca0188230edc4c5e7fdfe1349:
> 
>   BOARD: MCCMON6: Provide support for iMX6q based mccmon6 board
> (2017-01-30 16:24:47 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170201/1875a395/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-02-01 15:50 Stefano Babic
  2017-02-02  3:20 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-02-01 15:50 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit cf4128e53caa4f7b0a6586fc3f10690d5c05db31:

  Merge git://www.denx.de/git/u-boot-marvell (2017-01-26 12:26:24 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 11bd5e7b62070c7ca0188230edc4c5e7fdfe1349:

  BOARD: MCCMON6: Provide support for iMX6q based mccmon6 board
(2017-01-30 16:24:47 +0100)

----------------------------------------------------------------
Breno Lima (3):
      udoo_neo: Add fdt_addr_r environment variable
      udoo_neo: Remove trailing semicolon and space
      udoo_neo: Remove ramdiskaddr environment variable

Fabio Estevam (2):
      mx6qsabreauto: Pass the correct parallel NOR width
      README: mxc_hab: Adapt the CONFIG_SECURE_BOOT text to Kconfig

Gary Bisson (1):
      imx: nitrogen6x: fix USB host initialization

Lukasz Majewski (1):
      BOARD: MCCMON6: Provide support for iMX6q based mccmon6 board

Marcin Niestroj (1):
      ARM: imx6ul: Move liteSOM source to SoC directory

Martin Kaiser (1):
      tools: imximage: refactor header length calculations for imximage v1

Patrick Bruenn (1):
      arm: dts: imx53-cx9020: fix packetloss on fec_mxc

Peng Fan (4):
      imx: mx6sx: add dts for mx6sxsabreauto board
      imx: mx6sxsabreauto: enable pinctrl driver
      imx: dts: mx6sxsabreauto: enable i2c2/3
      imx: mx6sxsabreauto: enable more dm drivers

Stefan Agner (1):
      imx_common: check for bmode Serial Downloader

 arch/arm/Kconfig
|    2 -
 arch/arm/Makefile
|    1 -
 arch/arm/cpu/armv7/mx6/Kconfig
|   14 +-
 arch/arm/cpu/armv7/mx6/Makefile
|    1 +
 arch/arm/{mach-litesom => cpu/armv7/mx6}/litesom.c
|    0
 arch/arm/dts/Makefile
|    1 +
 arch/arm/dts/imx53-cx9020.dts
|   20 +-
 arch/arm/dts/imx6sx-pinfunc.h
| 1558
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6sx-sabreauto.dts
|  188 ++++++++++++++++++
 arch/arm/dts/imx6sx.dtsi
| 1298
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/imx-common/spl.c
|    6 +-
 arch/arm/{mach-litesom/include/mach => include/asm/arch-mx6}/litesom.h
|    4 +-
 arch/arm/mach-litesom/Kconfig
|    6 -
 arch/arm/mach-litesom/Makefile
|    6 -
 board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
|  258 ++++++-------------------
 board/grinn/liteboard/board.c
|    2 +-
 board/liebherr/mccmon6/Kconfig
|   12 ++
 board/liebherr/mccmon6/MAINTAINERS
|    7 +
 board/liebherr/mccmon6/Makefile
|    8 +
 board/liebherr/mccmon6/mccmon6.c
|  490 ++++++++++++++++++++++++++++++++++++++++++++++
 board/liebherr/mccmon6/mon6_imximage_nor.cfg
|    9 +
 board/liebherr/mccmon6/mon6_imximage_sd.cfg
|    9 +
 board/liebherr/mccmon6/spl.c
|  317 ++++++++++++++++++++++++++++++
 configs/mccmon6_nor_defconfig
|   33 ++++
 configs/mccmon6_sd_defconfig
|   34 ++++
 configs/mx6sxsabreauto_defconfig
|   17 ++
 doc/README.mxc_hab
|    5 +-
 include/configs/mccmon6.h
|  321 ++++++++++++++++++++++++++++++
 include/configs/mx6qsabreauto.h
|    1 +
 include/configs/mx6sxsabreauto.h
|    7 -
 include/configs/nitrogen6x.h
|    2 +
 include/configs/udoo_neo.h
|    4 +-
 include/dt-bindings/clock/imx6sx-clock.h
|  280 +++++++++++++++++++++++++++
 tools/imximage.c
|   38 ++--
 34 files changed, 4692 insertions(+), 267 deletions(-)
 rename arch/arm/{mach-litesom => cpu/armv7/mx6}/litesom.c (100%)
 create mode 100644 arch/arm/dts/imx6sx-pinfunc.h
 create mode 100644 arch/arm/dts/imx6sx-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6sx.dtsi
 rename arch/arm/{mach-litesom/include/mach =>
include/asm/arch-mx6}/litesom.h (68%)
 delete mode 100644 arch/arm/mach-litesom/Kconfig
 delete mode 100644 arch/arm/mach-litesom/Makefile
 create mode 100644 board/liebherr/mccmon6/Kconfig
 create mode 100644 board/liebherr/mccmon6/MAINTAINERS
 create mode 100644 board/liebherr/mccmon6/Makefile
 create mode 100644 board/liebherr/mccmon6/mccmon6.c
 create mode 100644 board/liebherr/mccmon6/mon6_imximage_nor.cfg
 create mode 100644 board/liebherr/mccmon6/mon6_imximage_sd.cfg
 create mode 100644 board/liebherr/mccmon6/spl.c
 create mode 100644 configs/mccmon6_nor_defconfig
 create mode 100644 configs/mccmon6_sd_defconfig
 create mode 100644 include/configs/mccmon6.h
 create mode 100644 include/dt-bindings/clock/imx6sx-clock.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2017-01-02 17:08 Stefano Babic
@ 2017-01-03  1:04 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2017-01-03  1:04 UTC (permalink / raw)
  To: u-boot

On Mon, Jan 02, 2017 at 06:08:01PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 3d3a74cc8c774345be7d1661b215555ad41f4515:
> 
>   mmc: move MMC_SDHCI_IO_ACCESSORS to Kconfig (2016-12-29 13:08:17 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 7c4f0ff81e6fc3b58b8af5f64c3da98624e40132:
> 
>   udoo: neo: Fix indentation (2017-01-02 17:55:58 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170102/f673011d/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2017-01-02 17:08 Stefano Babic
  2017-01-03  1:04 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2017-01-02 17:08 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 3d3a74cc8c774345be7d1661b215555ad41f4515:

  mmc: move MMC_SDHCI_IO_ACCESSORS to Kconfig (2016-12-29 13:08:17 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 7c4f0ff81e6fc3b58b8af5f64c3da98624e40132:

  udoo: neo: Fix indentation (2017-01-02 17:55:58 +0100)

----------------------------------------------------------------
Fabio Estevam (4):
      udoo_neo: Remove USDHC3 entry
      udoo_neo: Use 'fdtfile' variable name
      mx6qsabreauto: Fix the EIM clock for the mx6qp variant
      udoo: neo: Fix indentation

Jagan Teki (12):
      imx6: engicam: Use bootm instead of bootz
      configs: engicam: Rename nand with gpmi-name in mtdparts
      defconfigs: engicam: Enable MMC commands in nand
      defconfigs: engicam: Enable UBI commands
      imx6: engicam: Add nandboot env support
      defconfigs: imx6: engicam: Enable FIT
      configs: engicam: Enable CONFIG_IMAGE_FORMAT_LEGACY
      configs: engicam: Cleanup on mmcboot env
      configs: engicam: Add fitboot env support
      imx6ul: geam6ul: Add MAINTAINERS for nand_defconfig
      imx6ul: geam6ul: Enable I2C support

Kevin Hilman (1):
      ARM: imx7s-warp: enable USB gadget ethernet

Peng Fan (1):
      imx: thermal: Kconfig: add MX7

Sven Ebenfeld (5):
      arm: imx: remove bmode , hdmidet and dek commands from SPL
      arm: imx: add HAB authentication of image to SPL boot
      tools: mkimage: add firmware-ivt image type for HAB verification
      doc: imx6: add section for secure boot with SPL
      Makefile: preserve output for images that can contain HAB Blocks

 .gitignore                                    |   2 +-
 Makefile                                      |  15 +++++++++++++--
 arch/arm/Makefile                             |   2 +-
 arch/arm/imx-common/Makefile                  |   6 ++++++
 arch/arm/imx-common/hab.c                     | 129
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------------------------
 arch/arm/imx-common/spl.c                     |  25
+++++++++++++++++++++++++
 arch/arm/imx-common/spl_sd.cfg                |  10 ++++++++++
 arch/arm/include/asm/imx-common/hab.h         |   2 ++
 board/engicam/geam6ul/MAINTAINERS             |   1 +
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |  28
++++++++++++++++++++++++++++
 board/udoo/neo/neo.c                          |   7 +++----
 board/warp7/warp7.c                           |  14 ++++++++++++++
 common/image.c                                |   6 ++++++
 configs/imx6dl_icore_mmc_defconfig            |   4 +++-
 configs/imx6dl_icore_nand_defconfig           |  10 +++++++++-
 configs/imx6dl_icore_rqs_mmc_defconfig        |   4 +++-
 configs/imx6q_icore_mmc_defconfig             |   4 +++-
 configs/imx6q_icore_nand_defconfig            |  10 +++++++++-
 configs/imx6q_icore_rqs_mmc_defconfig         |   4 +++-
 configs/imx6ul_geam_mmc_defconfig             |   4 +++-
 configs/imx6ul_geam_nand_defconfig            |  12 +++++++++++-
 configs/warp7_defconfig                       |   5 +++++
 doc/README.imx6                               |  49
+++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/thermal/Kconfig                       |   2 +-
 include/configs/imx6qdl_icore.h               |  77
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------
 include/configs/imx6qdl_icore_rqs.h           |  43
++++++++++++++++++++++++++++++-------------
 include/configs/imx6ul_geam.h                 |  76
++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------
 include/configs/mx6_common.h                  |   3 +++
 include/configs/udoo_neo.h                    |  12 ++++++------
 include/configs/warp7.h                       |   7 +++++++
 include/image.h                               |   1 +
 scripts/Makefile.lib                          |   3 ++-
 scripts/Makefile.spl                          |   4 +++-
 tools/default_image.c                         |  10 ++++++++--
 tools/mkimage.c                               |  32
++++++++++++++++++++++++++++++++
 35 files changed, 486 insertions(+), 137 deletions(-)

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-12-18 17:48 Stefano Babic
@ 2016-12-19 21:18 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-12-19 21:18 UTC (permalink / raw)
  To: u-boot

On Sun, Dec 18, 2016 at 06:48:17PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 53e8ca22538c2cec691fe74098684a359302688c:
> 
>   MAINTAINERS: DFU: Change e-mail address for DFU maintainer (2016-12-12
> 13:03:15 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 854bb75be98ad792ff64c26ae38a1392ea185cd6:
> 
>   imx6: icorem6_rqs: Add FEC support (2016-12-16 18:39:06 +0100)
> 

After migrating CONFIG_USE_ARCH_MEMSET/MEMCPY (they are on by default
for ARMv7 now), applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161219/870fa2a6/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-12-18 17:48 Stefano Babic
  2016-12-19 21:18 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-12-18 17:48 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 53e8ca22538c2cec691fe74098684a359302688c:

  MAINTAINERS: DFU: Change e-mail address for DFU maintainer (2016-12-12
13:03:15 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 854bb75be98ad792ff64c26ae38a1392ea185cd6:

  imx6: icorem6_rqs: Add FEC support (2016-12-16 18:39:06 +0100)

----------------------------------------------------------------
Breno Lima (10):
      Revert "ARM: mx6: add MMC2 boot device detection support in SPL"
      udoo_neo: Remove USDHC3 support
      udoo_neo: Move MX6SX configuration to Kconfig
      udoo_neo: Staticize board_string()
      udoo_neo: Remove mmcautodetect option
      udoo_neo: Remove console option
      udoo_neo: Add thermal support
      power: pmic: Add Voltage configuration macro
      udoo_neo: Add PFUZE300 PMIC support
      udoo_neo: Add Ethernet support

Jagan Teki (29):
      net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr
      net: fec_mxc: Convert into driver model
      net: fec_mxc: Driver cleanups
      dm: net: fec: Add .read_rom_hwaddr
      ARM: dts: imx6qdl-icore: Add FEC support
      icorem6: Use CONFIG_DM_ETH support
      video: Kconfig: Add VIDEO_IPV3 entry
      imx6: icorem6: Add framebuffer support
      imx6: icorem6: Add custom splashscreen support
      i2c: Kconfig: Add SYS_I2C_MXC entry
      i2c: mxc: Print hex instead of decimal for bus address
      i2c: mxc: Make 'no gpio pinctrl state' print as debug
      imx6: icorem6: Add I2C support
      arm: dts: Add devicetree for i.MX6UL
      arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support
      arm: dts: imx6ul-geam: Add I2C nodes
      imx6: geam6ul: Add I2C support
      imx6: geam6ul: Add NAND support
      imx6: geam6ul: Enable MTD device support
      imx6: geam6ul: Add default mtd nand partition table
      arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial
support
      arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS Starter Kit
initial support
      imx6: icorem6: Rename engicam icorem6 defconfig files
      arm: dts: imx6qdl-icore-rqs: Add I2C node's
      imx6: icorem6_rqs: Add I2C support
      arm: dts: imx6ul-geam: Add FEC node
      imx6: geam6ul: Add FEC support
      arm: dts: imx6qdl-icore-rqs: Add FEC node
      imx6: icorem6_rqs: Add FEC support

Marcin Niestroj (2):
      ARM: imx6ul: Add support for liteSOM
      board/liteboard: Add support for liteBoard

Max Krummenacher (2):
      arm: imx: initial support for apalis imx6
      arm: imx: initial support for colibri imx6

Patrick Bruenn (1):
      arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC

Peng Fan (19):
      imx: add i.MX 6SLL CPU type
      imx: mx6sll: add pinmux header files
      imx: mx6sll: update register address
      imx-common: timer: add i.MX6SLL support
      imx: mx6sll: add iomux settings
      imx: mx6: fix mmdc ch0 clk for 6SL
      imx: mx6: lcdif: gate clock before changing mux
      imx: mx6sl: add lcdif clock support
      imx: clock: gate clk before changing pix clk mux
      imx: mx6sll: add clock support
      imx-common: cache: configure L2 Cache for i.MX6SLL
      imx: mx6sll: add Kconfig entry for i.MX6SLL
      mx6_common: correct loadaddr and text base for i.MX6SLL
      OCOTP: Update OCOTP driver to support i.MX6SLL
      imx-common: lcdif: update lcdif regs for i.MX6SL/SLL
      pinctrl: imx6: support i.MX6SLL
      arm: dts: add i.MX6SLL device tree
      arm: imx: add i.MX6SLL EVK board support
      imx: mx6sllevk: add plugin support

Sanchayan Maity (1):
      configs: colibri_vf: Add fdt_fixup environment variable

Stefan Agner (6):
      toradex: fix USB Download gadget fixup callback
      toradex: allow custom fdt board setup in board file
      colibri_vf: use device-tree for MTD partitions
      colibri_vf: cleanup USB clock initialization
      colibri_vf: use same NAND clock as Linux uses
      ARM: dts: vf: Fix warning about missing reg property

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot

 arch/arm/Kconfig                                            |    2 +
 arch/arm/Makefile                                           |    1 +
 arch/arm/cpu/armv7/mx5/Kconfig                              |    8 +
 arch/arm/cpu/armv7/mx6/Kconfig                              |   63 ++
 arch/arm/cpu/armv7/mx6/clock.c                              |  143 ++-
 arch/arm/dts/Makefile                                       |    8 +-
 arch/arm/dts/imx53-cx9020.dts                               |  190 ++++
 arch/arm/dts/imx53-pinfunc.h                                | 1189
+++++++++++++++++++++++
 arch/arm/dts/imx53.dtsi                                     |  110 +++
 arch/arm/dts/imx6dl-icore-rqs.dts                           |   50 +
 arch/arm/dts/imx6q-icore-rqs.dts                            |   50 +
 arch/arm/dts/imx6qdl-icore-rqs.dtsi                         |  170 ++++
 arch/arm/dts/imx6qdl-icore.dtsi                             |   24 +
 arch/arm/dts/imx6sll-evk.dts                                |  801
+++++++++++++++
 arch/arm/dts/imx6sll-pinfunc.h                              |  882
+++++++++++++++++
 arch/arm/dts/imx6sll.dtsi                                   |  859
++++++++++++++++
 arch/arm/dts/imx6ul-geam-kit.dts                            |  168 ++++
 arch/arm/dts/imx6ul.dtsi                                    |  942
++++++++++++++++++
 arch/arm/dts/vf.dtsi                                        |    2 +
 arch/arm/imx-common/cache.c                                 |   17 +-
 arch/arm/imx-common/cpu.c                                   |    2 +
 arch/arm/imx-common/iomux-v3.c                              |   10 +-
 arch/arm/imx-common/spl.c                                   |    6 +-
 arch/arm/imx-common/timer.c                                 |   10 +-
 arch/arm/include/asm/arch-imx/cpu.h                         |    3 +-
 arch/arm/include/asm/arch-mx6/clock.h                       |    2 +-
 arch/arm/include/asm/arch-mx6/crm_regs.h                    |   21 +
 arch/arm/include/asm/arch-mx6/imx-regs.h                    |   77 +-
 arch/arm/include/asm/arch-mx6/mx6-pins.h                    |    2 +
 arch/arm/include/asm/arch-mx6/mx6sll_pins.h                 | 1019
+++++++++++++++++++
 arch/arm/include/asm/imx-common/iomux-v3.h                  |    6 +-
 arch/arm/include/asm/imx-common/regs-lcdif.h                |    7 +-
 arch/arm/include/asm/imx-common/sys_proto.h                 |    1 +
 arch/arm/mach-litesom/Kconfig                               |    6 +
 arch/arm/mach-litesom/Makefile                              |    6 +
 arch/arm/mach-litesom/include/mach/litesom.h                |   16 +
 arch/arm/mach-litesom/litesom.c                             |  200 ++++
 board/beckhoff/mx53cx9020/Kconfig                           |   12 +
 board/beckhoff/mx53cx9020/MAINTAINERS                       |    6 +
 board/beckhoff/mx53cx9020/Makefile                          |    9 +
 board/beckhoff/mx53cx9020/imximage.cfg                      |   82 ++
 board/beckhoff/mx53cx9020/mx53cx9020.c                      |  367 +++++++
 board/beckhoff/mx53cx9020/mx53cx9020_video.c                |   49 +
 board/engicam/geam6ul/Kconfig                               |   12 +
 board/engicam/geam6ul/MAINTAINERS                           |    6 +
 board/engicam/geam6ul/Makefile                              |    6 +
 board/engicam/geam6ul/README                                |   28 +
 board/engicam/geam6ul/geam6ul.c                             |  317 ++++++
 board/engicam/icorem6/MAINTAINERS                           |    6 +-
 board/engicam/icorem6/README                                |   19 +-
 board/engicam/icorem6/icorem6.c                             |  184 ++--
 board/engicam/icorem6_rqs/Kconfig                           |   12 +
 board/engicam/icorem6_rqs/MAINTAINERS                       |    7 +
 board/engicam/icorem6_rqs/Makefile                          |    6 +
 board/engicam/icorem6_rqs/README                            |   33 +
 board/engicam/icorem6_rqs/icorem6_rqs.c                     |  399 ++++++++
 board/freescale/mx6sllevk/Kconfig                           |   12 +
 board/freescale/mx6sllevk/Makefile                          |    6 +
 board/freescale/mx6sllevk/imximage.cfg                      |  127 +++
 board/freescale/mx6sllevk/mx6sllevk.c                       |  131 +++
 board/freescale/mx6sllevk/plugin.S                          |  155 +++
 board/freescale/mx6sxsabresd/mx6sxsabresd.c                 |    2 +-
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c           |    2 +-
 board/grinn/liteboard/Kconfig                               |   12 +
 board/grinn/liteboard/MAINTAINERS                           |    6 +
 board/grinn/liteboard/Makefile                              |    6 +
 board/grinn/liteboard/README                                |   31 +
 board/grinn/liteboard/board.c                               |  287 ++++++
 board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg             |   48 +
 board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg             |   48 +
 board/toradex/apalis_imx6/Kconfig                           |   55 ++
 board/toradex/apalis_imx6/MAINTAINERS                       |    9 +
 board/toradex/apalis_imx6/Makefile                          |    5 +
 board/toradex/apalis_imx6/apalis_imx6.c                     | 1292
+++++++++++++++++++++++++
 board/toradex/apalis_imx6/apalis_imx6q.cfg                  |   34 +
 board/toradex/apalis_imx6/clocks.cfg                        |   42 +
 board/toradex/apalis_imx6/ddr-setup.cfg                     |   97 ++
 board/toradex/apalis_imx6/do_fuse.c                         |   98 ++
 board/toradex/apalis_imx6/pf0100.c                          |  228 +++++
 board/toradex/apalis_imx6/pf0100.h                          |   56 ++
 board/toradex/apalis_imx6/pf0100_otp.inc                    |  191 ++++
 board/toradex/apalis_t30/apalis_t30.c                       |    8 +
 board/toradex/colibri_imx6/800mhz_2x64mx16.cfg              |   59 ++
 board/toradex/colibri_imx6/800mhz_4x64mx16.cfg              |   59 ++
 board/toradex/colibri_imx6/Kconfig                          |   44 +
 board/toradex/colibri_imx6/MAINTAINERS                      |    8 +
 board/toradex/colibri_imx6/Makefile                         |    5 +
 board/toradex/colibri_imx6/clocks.cfg                       |   42 +
 board/toradex/colibri_imx6/colibri_imx6.c                   | 1130
+++++++++++++++++++++
 board/toradex/colibri_imx6/colibri_imx6.cfg                 |   38 +
 board/toradex/colibri_imx6/ddr-setup.cfg                    |   98 ++
 board/toradex/colibri_imx6/do_fuse.c                        |   98 ++
 board/toradex/colibri_imx6/pf0100.c                         |  211 ++++
 board/toradex/colibri_imx6/pf0100.h                         |   56 ++
 board/toradex/colibri_imx6/pf0100_otp.inc                   |  189 ++++
 board/toradex/colibri_imx7/colibri_imx7.c                   |    8 +
 board/toradex/colibri_pxa270/colibri_pxa270.c               |    8 +
 board/toradex/colibri_t20/colibri_t20.c                     |    8 +
 board/toradex/colibri_t30/colibri_t30.c                     |    8 +
 board/toradex/colibri_vf/colibri_vf.c                       |   37 +-
 board/toradex/common/tdx-common.c                           |   12 +-
 board/toradex/common/tdx-common.h                           |    2 +
 board/udoo/neo/neo.c                                        |  334 +++++--
 configs/apalis_imx6_defconfig                               |   52 +
 configs/apalis_imx6_nospl_com_defconfig                     |   42 +
 configs/apalis_imx6_nospl_it_defconfig                      |   44 +
 configs/colibri_imx6_defconfig                              |   50 +
 configs/colibri_imx6_nospl_defconfig                        |   44 +
 ...x6qdl_icore_mmc_defconfig => imx6dl_icore_mmc_defconfig} |    7 +-
 ...qdl_icore_nand_defconfig => imx6dl_icore_nand_defconfig} |    7 +-
 configs/imx6dl_icore_rqs_mmc_defconfig                      |   43 +
 configs/imx6q_icore_mmc_defconfig                           |   47 +
 configs/imx6q_icore_nand_defconfig                          |   42 +
 configs/imx6q_icore_rqs_mmc_defconfig                       |   43 +
 configs/imx6ul_geam_mmc_defconfig                           |   44 +
 configs/imx6ul_geam_nand_defconfig                          |   37 +
 configs/liteboard_defconfig                                 |   29 +
 configs/mx53cx9020_defconfig                                |   35 +
 configs/mx6sllevk_defconfig                                 |   36 +
 configs/mx6sllevk_plugin_defconfig                          |   37 +
 configs/udoo_neo_defconfig                                  |    4 +-
 drivers/fpga/Kconfig                                        |   20 +
 drivers/i2c/Kconfig                                         |    8 +
 drivers/i2c/mxc_i2c.c                                       |    2 +-
 drivers/misc/mxc_ocotp.c                                    |   16 +-
 drivers/net/Kconfig                                         |    2 +-
 drivers/net/fec_mxc.c                                       |  473
++++++---
 drivers/net/fec_mxc.h                                       |   31 +-
 drivers/pinctrl/nxp/Kconfig                                 |   14 +
 drivers/pinctrl/nxp/Makefile                                |    1 +
 drivers/pinctrl/nxp/pinctrl-imx5.c                          |   44 +
 drivers/pinctrl/nxp/pinctrl-imx6.c                          |    2 +
 drivers/serial/Kconfig                                      |    2 +-
 drivers/video/Kconfig                                       |    7 +
 include/configs/apalis_imx6.h                               |  342 +++++++
 include/configs/colibri_imx6.h                              |  310 ++++++
 include/configs/colibri_vf.h                                |    7 +-
 include/configs/imx6qdl_icore.h                             |   14 +
 include/configs/imx6qdl_icore_rqs.h                         |  135 +++
 include/configs/imx6ul_geam.h                               |  165 ++++
 include/configs/liteboard.h                                 |  171 ++++
 include/configs/mx53cx9020.h                                |  198 ++++
 include/configs/mx6_common.h                                |    3 +-
 include/configs/mx6sllevk.h                                 |  152 +++
 include/configs/udoo_neo.h                                  |   35 +-
 include/dt-bindings/clock/imx5-clock.h                      |  219 +++++
 include/dt-bindings/clock/imx6sll-clock.h                   |  204 ++++
 include/dt-bindings/clock/imx6ul-clock.h                    |    1 +
 include/power/pfuze3000_pmic.h                              |    5 +
 tools/logos/engicam.bmp                                     |  Bin 0 ->
60214 bytes
 150 files changed, 16828 insertions(+), 473 deletions(-)
 create mode 100644 arch/arm/dts/imx53-cx9020.dts
 create mode 100644 arch/arm/dts/imx53-pinfunc.h
 create mode 100644 arch/arm/dts/imx53.dtsi
 create mode 100644 arch/arm/dts/imx6dl-icore-rqs.dts
 create mode 100644 arch/arm/dts/imx6q-icore-rqs.dts
 create mode 100644 arch/arm/dts/imx6qdl-icore-rqs.dtsi
 create mode 100644 arch/arm/dts/imx6sll-evk.dts
 create mode 100644 arch/arm/dts/imx6sll-pinfunc.h
 create mode 100644 arch/arm/dts/imx6sll.dtsi
 create mode 100644 arch/arm/dts/imx6ul-geam-kit.dts
 create mode 100644 arch/arm/dts/imx6ul.dtsi
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6sll_pins.h
 create mode 100644 arch/arm/mach-litesom/Kconfig
 create mode 100644 arch/arm/mach-litesom/Makefile
 create mode 100644 arch/arm/mach-litesom/include/mach/litesom.h
 create mode 100644 arch/arm/mach-litesom/litesom.c
 create mode 100644 board/beckhoff/mx53cx9020/Kconfig
 create mode 100644 board/beckhoff/mx53cx9020/MAINTAINERS
 create mode 100644 board/beckhoff/mx53cx9020/Makefile
 create mode 100644 board/beckhoff/mx53cx9020/imximage.cfg
 create mode 100644 board/beckhoff/mx53cx9020/mx53cx9020.c
 create mode 100644 board/beckhoff/mx53cx9020/mx53cx9020_video.c
 create mode 100644 board/engicam/geam6ul/Kconfig
 create mode 100644 board/engicam/geam6ul/MAINTAINERS
 create mode 100644 board/engicam/geam6ul/Makefile
 create mode 100644 board/engicam/geam6ul/README
 create mode 100644 board/engicam/geam6ul/geam6ul.c
 create mode 100644 board/engicam/icorem6_rqs/Kconfig
 create mode 100644 board/engicam/icorem6_rqs/MAINTAINERS
 create mode 100644 board/engicam/icorem6_rqs/Makefile
 create mode 100644 board/engicam/icorem6_rqs/README
 create mode 100644 board/engicam/icorem6_rqs/icorem6_rqs.c
 create mode 100644 board/freescale/mx6sllevk/Kconfig
 create mode 100644 board/freescale/mx6sllevk/Makefile
 create mode 100644 board/freescale/mx6sllevk/imximage.cfg
 create mode 100644 board/freescale/mx6sllevk/mx6sllevk.c
 create mode 100644 board/freescale/mx6sllevk/plugin.S
 create mode 100644 board/grinn/liteboard/Kconfig
 create mode 100644 board/grinn/liteboard/MAINTAINERS
 create mode 100644 board/grinn/liteboard/Makefile
 create mode 100644 board/grinn/liteboard/README
 create mode 100644 board/grinn/liteboard/board.c
 create mode 100644 board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg
 create mode 100644 board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg
 create mode 100644 board/toradex/apalis_imx6/Kconfig
 create mode 100644 board/toradex/apalis_imx6/MAINTAINERS
 create mode 100644 board/toradex/apalis_imx6/Makefile
 create mode 100644 board/toradex/apalis_imx6/apalis_imx6.c
 create mode 100644 board/toradex/apalis_imx6/apalis_imx6q.cfg
 create mode 100644 board/toradex/apalis_imx6/clocks.cfg
 create mode 100644 board/toradex/apalis_imx6/ddr-setup.cfg
 create mode 100644 board/toradex/apalis_imx6/do_fuse.c
 create mode 100644 board/toradex/apalis_imx6/pf0100.c
 create mode 100644 board/toradex/apalis_imx6/pf0100.h
 create mode 100644 board/toradex/apalis_imx6/pf0100_otp.inc
 create mode 100644 board/toradex/colibri_imx6/800mhz_2x64mx16.cfg
 create mode 100644 board/toradex/colibri_imx6/800mhz_4x64mx16.cfg
 create mode 100644 board/toradex/colibri_imx6/Kconfig
 create mode 100644 board/toradex/colibri_imx6/MAINTAINERS
 create mode 100644 board/toradex/colibri_imx6/Makefile
 create mode 100644 board/toradex/colibri_imx6/clocks.cfg
 create mode 100644 board/toradex/colibri_imx6/colibri_imx6.c
 create mode 100644 board/toradex/colibri_imx6/colibri_imx6.cfg
 create mode 100644 board/toradex/colibri_imx6/ddr-setup.cfg
 create mode 100644 board/toradex/colibri_imx6/do_fuse.c
 create mode 100644 board/toradex/colibri_imx6/pf0100.c
 create mode 100644 board/toradex/colibri_imx6/pf0100.h
 create mode 100644 board/toradex/colibri_imx6/pf0100_otp.inc
 create mode 100644 configs/apalis_imx6_defconfig
 create mode 100644 configs/apalis_imx6_nospl_com_defconfig
 create mode 100644 configs/apalis_imx6_nospl_it_defconfig
 create mode 100644 configs/colibri_imx6_defconfig
 create mode 100644 configs/colibri_imx6_nospl_defconfig
 rename configs/{imx6qdl_icore_mmc_defconfig =>
imx6dl_icore_mmc_defconfig} (90%)
 rename configs/{imx6qdl_icore_nand_defconfig =>
imx6dl_icore_nand_defconfig} (89%)
 create mode 100644 configs/imx6dl_icore_rqs_mmc_defconfig
 create mode 100644 configs/imx6q_icore_mmc_defconfig
 create mode 100644 configs/imx6q_icore_nand_defconfig
 create mode 100644 configs/imx6q_icore_rqs_mmc_defconfig
 create mode 100644 configs/imx6ul_geam_mmc_defconfig
 create mode 100644 configs/imx6ul_geam_nand_defconfig
 create mode 100644 configs/liteboard_defconfig
 create mode 100644 configs/mx53cx9020_defconfig
 create mode 100644 configs/mx6sllevk_defconfig
 create mode 100644 configs/mx6sllevk_plugin_defconfig
 create mode 100644 drivers/pinctrl/nxp/pinctrl-imx5.c
 create mode 100644 include/configs/apalis_imx6.h
 create mode 100644 include/configs/colibri_imx6.h
 create mode 100644 include/configs/imx6qdl_icore_rqs.h
 create mode 100644 include/configs/imx6ul_geam.h
 create mode 100644 include/configs/liteboard.h
 create mode 100644 include/configs/mx53cx9020.h
 create mode 100644 include/configs/mx6sllevk.h
 create mode 100644 include/dt-bindings/clock/imx5-clock.h
 create mode 100644 include/dt-bindings/clock/imx6sll-clock.h
 create mode 100755 tools/logos/engicam.bmp



-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-11-30 10:57 Stefano Babic
@ 2016-12-01  0:44 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-12-01  0:44 UTC (permalink / raw)
  To: u-boot

On Wed, Nov 30, 2016 at 11:57:06AM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit e94793c844a40606252f2e3f6428063e057b3fd2:
> 
>   spl: add USB Gadget config option (2016-11-28 19:49:49 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 4db4d42ee290a8cad00b358b2e7ef6a00483893b:
> 
>   imx6: clock: Enable External Memory Interface [EIM] clock
> (eim_slow_clock) (2016-11-30 09:57:19 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161130/357e414a/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-11-30 10:57 Stefano Babic
  2016-12-01  0:44 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-11-30 10:57 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit e94793c844a40606252f2e3f6428063e057b3fd2:

  spl: add USB Gadget config option (2016-11-28 19:49:49 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 4db4d42ee290a8cad00b358b2e7ef6a00483893b:

  imx6: clock: Enable External Memory Interface [EIM] clock
(eim_slow_clock) (2016-11-30 09:57:19 +0100)

----------------------------------------------------------------
Angus Ainslie (1):
      imx7: SPI: add suport for SPI flash in mikroBUS slot

Breno Lima (1):
      mx6sx: Add initial support for UDOO Neo Board

Christoph Fritz (2):
      pwm: imx: increase support up to PWM8 for i.MX6SX
      mx6sx: Add initial support for Samtec VIN|ING 2000 board

Eric Nelson (6):
      tools: imximage: display DCD block offset, length
      imx: mx6: ddr: add register MPZQLP2CTL for LPDDR2
      mx6: ddr: allow 32 cycles for DQS gating calibration
      mx6: ddr: pass mx6_ddr_sysinfo to calibration routines
      mx6: ddr: add routine to return DDR calibration data
      ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routines

Heiko Schocher (2):
      mx35: add DT support to flea3 board
      mx35: adjust default environment for flea3 board

Ken Lin (1):
      board: ge: bx50v3: add the PMIC configuration support

Lukasz Majewski (1):
      imx6: clock: Enable External Memory Interface [EIM] clock
(eim_slow_clock)

Marcin Niestroj (1):
      ARM: mx6: add MMC2 boot device detection support in SPL

Max Krummenacher (2):
      spl: mmc: fix switch statement
      imx: make ipu's di configurable

Peng Fan (1):
      imx: mx6ull: update the REFTOP_VBGADJ setting

Sanchayan Maity (1):
      colibri_vf: Read kernel and device tree from static UBI volumes

Sebastien Bourdelin (1):
      ARM: ts4600: add basic board support

Soeren Moch (1):
      tbs2910: Make Ethernet functional again

Stefan Agner (1):
      arm: mx6: specify SPL padding

Stefano Babic (3):
      mx35: factorize SDRAM setup in flea3
      mx35: add GPIO setup on flea3 board
      Merge branch 'master' of git://git.denx.de/u-boot

Sven Ebenfeld (1):
      arm: imx: wandboard: fix compile error if CONFIG_VIDEO is deactivated

Ye.Li (1):
      imx: mx6sx: Disable ENET clock before switching clock parent

 arch/arm/Kconfig                          |   6 +
 arch/arm/cpu/armv7/mx6/Kconfig            |  20 ++
 arch/arm/cpu/armv7/mx6/clock.c            |  19 ++
 arch/arm/cpu/armv7/mx6/ddr.c              | 131 +++++---
 arch/arm/cpu/armv7/mx6/soc.c              |  31 +-
 arch/arm/imx-common/spl.c                 |   6 +-
 arch/arm/imx-common/video.c               |   2 +-
 arch/arm/include/asm/arch-mx6/clock.h     |   1 +
 arch/arm/include/asm/arch-mx6/crm_regs.h  |   1 +
 arch/arm/include/asm/arch-mx6/mx6-ddr.h   |  10 +-
 arch/arm/include/asm/imx-common/video.h   |   1 +
 board/CarMediaLab/flea3/flea3.c           | 124 ++-----
 board/freescale/mx7dsabresd/mx7dsabresd.c |  24 ++
 board/ge/bx50v3/bx50v3.c                  |  54 ++++
 board/kosagi/novena/novena_spl.c          |   4 +-
 board/samtec/vining_2000/Kconfig          |  12 +
 board/samtec/vining_2000/MAINTAINERS      |   6 +
 board/samtec/vining_2000/Makefile         |   6 +
 board/samtec/vining_2000/imximage.cfg     | 132 ++++++++
 board/samtec/vining_2000/vining_2000.c    | 517
++++++++++++++++++++++++++++++
 board/tbs/tbs2910/tbs2910.c               |  33 ++
 board/technologic/ts4600/Kconfig          |  15 +
 board/technologic/ts4600/MAINTAINERS      |   6 +
 board/technologic/ts4600/Makefile         |  11 +
 board/technologic/ts4600/iomux.c          | 149 +++++++++
 board/technologic/ts4600/ts4600.c         |  89 +++++
 board/udoo/neo/Kconfig                    |  12 +
 board/udoo/neo/MAINTAINERS                |   7 +
 board/udoo/neo/Makefile                   |   6 +
 board/udoo/neo/neo.c                      | 441 +++++++++++++++++++++++++
 board/wandboard/wandboard.c               |   2 +
 common/spl/spl_mmc.c                      |   1 -
 configs/flea3_defconfig                   |   4 +
 configs/mx7dsabresd_secure_defconfig      |   3 +
 configs/novena_defconfig                  |   1 +
 configs/ts4600_defconfig                  |  18 ++
 configs/udoo_neo_defconfig                |  30 ++
 configs/vining_2000_defconfig             |  31 ++
 drivers/pwm/pwm-imx-util.c                |  12 +-
 include/configs/colibri_vf.h              |   6 +-
 include/configs/flea3.h                   |   9 +-
 include/configs/imx6_spl.h                |   6 +
 include/configs/mx7dsabresd.h             |   3 +
 include/configs/ts4600.h                  |  70 ++++
 include/configs/udoo_neo.h                |  94 ++++++
 include/configs/vining_2000.h             | 123 +++++++
 include/configs/wandboard.h               |   2 +
 tools/imximage.c                          |  10 +-
 48 files changed, 2144 insertions(+), 157 deletions(-)
 create mode 100644 board/samtec/vining_2000/Kconfig
 create mode 100644 board/samtec/vining_2000/MAINTAINERS
 create mode 100644 board/samtec/vining_2000/Makefile
 create mode 100644 board/samtec/vining_2000/imximage.cfg
 create mode 100644 board/samtec/vining_2000/vining_2000.c
 create mode 100644 board/technologic/ts4600/Kconfig
 create mode 100644 board/technologic/ts4600/MAINTAINERS
 create mode 100644 board/technologic/ts4600/Makefile
 create mode 100644 board/technologic/ts4600/iomux.c
 create mode 100644 board/technologic/ts4600/ts4600.c
 create mode 100644 board/udoo/neo/Kconfig
 create mode 100644 board/udoo/neo/MAINTAINERS
 create mode 100644 board/udoo/neo/Makefile
 create mode 100644 board/udoo/neo/neo.c
 create mode 100644 configs/ts4600_defconfig
 create mode 100644 configs/udoo_neo_defconfig
 create mode 100644 configs/vining_2000_defconfig
 create mode 100644 include/configs/ts4600.h
 create mode 100644 include/configs/udoo_neo.h
 create mode 100644 include/configs/vining_2000.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-10-28 14:44 Stefano Babic
@ 2016-10-29  1:59 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-10-29  1:59 UTC (permalink / raw)
  To: u-boot

On Fri, Oct 28, 2016 at 04:44:35PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> There are two major patchsets in this PR:
> 
> - plugin support from Peng
> - Jagan's support for Engicam i.CoreM6 , with several
>   move to Kconfig.
> 
> 
> The following changes since commit ebf7fff20ab8127f318b238e47a21856497bd6fe:
> 
>   spl: move FDT_FIXUP_PARTITIONS to Kconfig (2016-10-15 08:12:46 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 1c140f7bbf4a008fcd78b407ea80c60a2a18fc1f:
> 
>   imx6: icorem6: Add default mtd nand partition table (2016-10-26
> 19:00:06 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161028/701e5ad7/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-10-28 14:44 Stefano Babic
  2016-10-29  1:59 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-10-28 14:44 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

There are two major patchsets in this PR:

- plugin support from Peng
- Jagan's support for Engicam i.CoreM6 , with several
  move to Kconfig.


The following changes since commit ebf7fff20ab8127f318b238e47a21856497bd6fe:

  spl: move FDT_FIXUP_PARTITIONS to Kconfig (2016-10-15 08:12:46 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 1c140f7bbf4a008fcd78b407ea80c60a2a18fc1f:

  imx6: icorem6: Add default mtd nand partition table (2016-10-26
19:00:06 +0200)

----------------------------------------------------------------
Diego Dorta (2):
      mx6sabresd: Add Falcon mode support
      mx6sabresd: Add README file

Gary Bisson (4):
      arm: imx-common: add SECURE_BOOT option to Kconfig
      mx6_common: add secure boot support
      mx7_common: add secure boot support
      nitrogen6x: add secure boot support

Jagan Teki (21):
      serial: Kconfig: Add MXC_UART entry
      thermal: Kconfig: Add IMX_THERMAL entry
      config: Move CONFIG_DEFAULT_FDT_FILE to defconfigs
      arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support
      net: Kconfig: Add FEC_MXC entry
      imx6: icorem6: Add ENET support
      imx: s/docs\/README.imximage/doc\/README.imximage/g
      arm: dts: Add devicetree for i.MX6DL
      arm: dts: Add devicetree for i.MX6DQL
      arm: dts: imx6dl: Add pinctrl defines
      dt-bindings: clock: imx6qdl: Add clock defines
      arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo
      imx6q: icorem6: Enable pinctrl driver
      engicam: icorem6: Add DM_GPIO, DM_MMC support
      arm: dts: Add devicetree for i.MX6Q
      arm: dts: imx6q: Add pinctrl defines
      arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual
      mtd: nand: Kconfig: Add NAND_MXS entry
      imx6: icorem6: Add NAND support
      imx6: icorem6: Enable MTD device support
      imx6: icorem6: Add default mtd nand partition table

Peng Fan (9):
      arm: imx-common: introduce back usec2ticks
      tools: imximage: add plugin support
      imx: mx6: Add plugin support
      imx: mx7: Add plugin support
      imx-common: introduce USE_IMXIMG_PLUGIN Kconfig
      imx-common: compile plugin code
      imx: mx6ullevk: support plugin
      imx: mx6ullevk: correct boot device macro
      imx: mx6ull_14x14_evk: add plugin defconfig

 arch/arm/cpu/armv7/mx6/Kconfig              |   11 ++
 arch/arm/dts/Makefile                       |    4 +-
 arch/arm/dts/imx6dl-icore.dts               |   59 ++++++
 arch/arm/dts/imx6dl-pinfunc.h               | 1091
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6dl.dtsi                    |  133 +++++++++++++
 arch/arm/dts/imx6q-icore.dts                |   59 ++++++
 arch/arm/dts/imx6q-pinfunc.h                | 1047
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6q.dtsi                     |  300
+++++++++++++++++++++++++++++
 arch/arm/dts/imx6qdl-icore.dtsi             |  196 +++++++++++++++++++
 arch/arm/dts/imx6qdl.dtsi                   | 1281
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/imx-common/Kconfig                 |   14 ++
 arch/arm/imx-common/Makefile                |   29 ++-
 arch/arm/imx-common/timer.c                 |   16 ++
 arch/arm/include/asm/arch-mx6/mx6_plugin.S  |  159 ++++++++++++++++
 arch/arm/include/asm/arch-mx7/mx7_plugin.S  |  111 +++++++++++
 arch/arm/include/asm/imx-common/sys_proto.h |    2 +
 board/barco/titanium/imximage.cfg           |    2 +-
 board/boundary/nitrogen6x/nitrogen6dl.cfg   |    3 +
 board/boundary/nitrogen6x/nitrogen6dl2g.cfg |    3 +
 board/boundary/nitrogen6x/nitrogen6q.cfg    |    3 +
 board/boundary/nitrogen6x/nitrogen6q2g.cfg  |    3 +
 board/boundary/nitrogen6x/nitrogen6s.cfg    |    3 +
 board/boundary/nitrogen6x/nitrogen6s1g.cfg  |    3 +
 board/ccv/xpress/imximage.cfg               |    2 +-
 board/denx/m53evk/imximage.cfg              |    2 +-
 board/engicam/icorem6/Kconfig               |   12 ++
 board/engicam/icorem6/MAINTAINERS           |    6 +
 board/engicam/icorem6/Makefile              |    6 +
 board/engicam/icorem6/README                |   38 ++++
 board/engicam/icorem6/icorem6.c             |  537
+++++++++++++++++++++++++++++++++++++++++++++++++++
 board/freescale/mx6sabresd/README           |  103 ++++++++++
 board/freescale/mx6sabresd/mx6dlsabresd.cfg |    2 +-
 board/freescale/mx6sabresd/mx6sabresd.c     |   12 ++
 board/freescale/mx6slevk/imximage.cfg       |    2 +-
 board/freescale/mx6ullevk/imximage.cfg      |    8 +-
 board/freescale/mx6ullevk/plugin.S          |  139 ++++++++++++++
 board/freescale/mx7dsabresd/imximage.cfg    |    2 +-
 board/freescale/s32v234evb/s32v234evb.cfg   |    2 +-
 board/freescale/vf610twr/imximage.cfg       |    2 +-
 board/phytec/pcm052/imximage.cfg            |    2 +-
 board/technexion/pico-imx6ul/imximage.cfg   |    2 +-
 board/toradex/colibri_imx7/imximage.cfg     |    2 +-
 board/toradex/colibri_vf/imximage.cfg       |    2 +-
 board/warp/imximage.cfg                     |    2 +-
 board/warp7/imximage.cfg                    |    2 +-
 common/Kconfig                              |    5 +
 configs/dms-ba16-1g_defconfig               |    1 +
 configs/dms-ba16_defconfig                  |    1 +
 configs/ge_b450v3_defconfig                 |    1 +
 configs/ge_b650v3_defconfig                 |    1 +
 configs/ge_b850v3_defconfig                 |    1 +
 configs/imx6qdl_icore_mmc_defconfig         |   44 +++++
 configs/imx6qdl_icore_nand_defconfig        |   39 ++++
 configs/mx25pdk_defconfig                   |    1 +
 configs/mx53ard_defconfig                   |    1 +
 configs/mx6ull_14x14_evk_plugin_defconfig   |   33 ++++
 configs/pico-imx6ul_defconfig               |    1 +
 configs/tqma6q_mba6_mmc_defconfig           |    1 +
 configs/tqma6q_mba6_spi_defconfig           |    1 +
 configs/tqma6s_mba6_mmc_defconfig           |    1 +
 configs/tqma6s_mba6_spi_defconfig           |    1 +
 configs/tqma6s_wru4_mmc_defconfig           |    1 +
 configs/zc5202_defconfig                    |    1 +
 configs/zc5601_defconfig                    |    1 +
 drivers/mtd/nand/Kconfig                    |    7 +
 drivers/net/Kconfig                         |    7 +
 drivers/serial/Kconfig                      |    7 +
 drivers/thermal/Kconfig                     |   13 ++
 include/configs/advantech_dms-ba16.h        |    1 -
 include/configs/colibri_imx7.h              |    4 -
 include/configs/ge_bx50v3.h                 |    4 -
 include/configs/imx6qdl_icore.h             |  167 ++++++++++++++++
 include/configs/mx25pdk.h                   |    2 -
 include/configs/mx53ard.h                   |    2 -
 include/configs/mx6_common.h                |    9 +
 include/configs/mx6sabresd.h                |   12 ++
 include/configs/mx7_common.h                |    9 +
 include/configs/mx7dsabresd.h               |    4 -
 include/configs/pico-imx6ul.h               |    2 -
 include/configs/tqma6_mba6.h                |    6 -
 include/configs/tqma6_wru4.h                |    2 -
 include/configs/zc5202.h                    |    2 -
 include/configs/zc5601.h                    |    2 -
 include/dt-bindings/clock/imx6qdl-clock.h   |  274
++++++++++++++++++++++++++
 tools/imximage.c                            |  283
+++++++++++++++++++++------
 tools/imximage.h                            |    7 +-
 86 files changed, 6265 insertions(+), 116 deletions(-)
 create mode 100644 arch/arm/dts/imx6dl-icore.dts
 create mode 100644 arch/arm/dts/imx6dl-pinfunc.h
 create mode 100644 arch/arm/dts/imx6dl.dtsi
 create mode 100644 arch/arm/dts/imx6q-icore.dts
 create mode 100644 arch/arm/dts/imx6q-pinfunc.h
 create mode 100644 arch/arm/dts/imx6q.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-icore.dtsi
 create mode 100644 arch/arm/dts/imx6qdl.dtsi
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6_plugin.S
 create mode 100644 arch/arm/include/asm/arch-mx7/mx7_plugin.S
 create mode 100644 board/engicam/icorem6/Kconfig
 create mode 100644 board/engicam/icorem6/MAINTAINERS
 create mode 100644 board/engicam/icorem6/Makefile
 create mode 100644 board/engicam/icorem6/README
 create mode 100644 board/engicam/icorem6/icorem6.c
 create mode 100644 board/freescale/mx6sabresd/README
 create mode 100644 board/freescale/mx6ullevk/plugin.S
 create mode 100644 configs/imx6qdl_icore_mmc_defconfig
 create mode 100644 configs/imx6qdl_icore_nand_defconfig
 create mode 100644 configs/mx6ull_14x14_evk_plugin_defconfig
 create mode 100644 include/configs/imx6qdl_icore.h
 create mode 100644 include/dt-bindings/clock/imx6qdl-clock.h


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-10-07 15:38 Stefano Babic
@ 2016-10-08 17:08 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-10-08 17:08 UTC (permalink / raw)
  To: u-boot

On Fri, Oct 07, 2016 at 05:38:01PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 53fec162061811a73c7dab3207f8fdb2343ae289:
> 
>   Prepare v2016.11-rc1 (2016-10-03 09:28:13 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 3dddc793e0114eb7dfc68b98a4316644d4031fcb:
> 
>   board: ge: bx50v3: Pass video bootargs for b850v3 (2016-10-07 16:32:28
> +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161008/afce86bd/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot]  [PULL] Please pull u-boot-imx
@ 2016-10-07 15:38 Stefano Babic
  2016-10-08 17:08 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-10-07 15:38 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 53fec162061811a73c7dab3207f8fdb2343ae289:

  Prepare v2016.11-rc1 (2016-10-03 09:28:13 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 3dddc793e0114eb7dfc68b98a4316644d4031fcb:

  board: ge: bx50v3: Pass video bootargs for b850v3 (2016-10-07 16:32:28
+0200)

----------------------------------------------------------------
Albert ARIBAUD \(3ADEV\) (6):
      pcm052: fix MTD partitioning
      pcm052: remove target-specific dtb name from env
      pcm052: add 'm4go' command
      tools: mkimage: add support for Vybrid image format
      pcm052: allow specifying onboard DDR size in configs
      pcm052: add new BK4r1 target based on PCM052 SoM

Fabio Estevam (5):
      wandboard: Fix hang when going into low frequency
      wandboard: Remove videoargs script
      mx6sabresd: Make SPL DDR configuration to match the DCD table
      README.imx6: Fix Boundary Devices name
      udoo: Add a README file

Filip Brozovic (1):
      imx: iomux-v3: fix pad setup on i.MX6DQP when CONFIG_MX6QDL is defined

Ken Lin (1):
      board: ge: bx50v3: Pass video bootargs for b850v3

Peng Fan (22):
      imx: mx6ull: add iomux header file
      imx: mx6ull: add mx6ull major cpu type
      imx-common: introduce is_mx6ull
      imx: ocotp: support i.MX6ULL
      imx: timer: update gpt driver for i.MX6ULL
      imx: mx6ull: skip setting ahb clock
      imx: mx6ul: using runtime check when configuring PMIC_STBY_REQ
      imx: mx6ull: misc soc update
      imx: mx6ull: adjust POR_B setting for i.MX6ULL
      imx: mx6ull: update clock settings and CCM register map
      imx: mx6ull: Update memory map address
      imx: mx6ull: Add AIPS3 initialization
      imx: imx6ull: adjust the ldo 1.2v bandgap voltage
      imx: iomux: fix snvs usage for i.MX6ULL
      pinctrl: imx6: support i.MX6ULL
      arm: dts: imx6ull: add pinctrl defines
      dt-bindings: add i.mx6ul clock header
      arm: dts: add device tree for i.MX6ULL
      dm: mmc: intialize dev when probe
      arm: imx: add i.MX6ULL 14x14 EVK board support
      imx-common: enlarge mux width to 4
      imx: imx6ul: disable POR_B internal pull up

Ross Parker (1):
      imx_watchdog: Do not assert WDOG_B on watchdog init

Soeren Moch (2):
      board: tbs2910: Fix BOOTMAPSZ
      board: tbs2910: Add CMD_PART

Stefan Agner (12):
      imx: mx6: fix USB bmode to use reserved value
      dm: imx: serial: support device tree
      pinctrl: imx: do not announce driver initialization
      arm: dts: imx7: add pinctrl defines
      arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device tree
      colibri_imx7: remove legancy I2C support
      colibri_imx7: remove legancy UART platform data
      power: pmic: add Ricoh RN5T567 PMIC support
      arm: dts: imx7: add Ricoh RN5T567 PMIC node
      colibri_imx7: use Ricoh RN5T567 to reboot the board
      configs: enable device tree for Colibri iMX7
      ARM: vf610: use strcpy for soc environment variable

Ye Li (1):
      imx: mx6ull: add kconfig entry for MX6ULL

 Makefile                                       |    6 +
 arch/arm/Kconfig                               |    4 +
 arch/arm/config.mk                             |    3 +
 arch/arm/cpu/armv7/mx6/Kconfig                 |   11 ++
 arch/arm/cpu/armv7/mx6/clock.c                 |   59 +++---
 arch/arm/cpu/armv7/mx6/soc.c                   |   57 ++++--
 arch/arm/cpu/armv7/vf610/Makefile              |    5 +
 arch/arm/cpu/armv7/vf610/generic.c             |    2 +-
 arch/arm/dts/Makefile                          |    7 +-
 arch/arm/dts/bk4r1.dts                         |   48 +++++
 arch/arm/dts/imx6ul-pinfunc.h                  |  938
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6ull-14x14-evk.dts             |  527
++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6ull-pinfunc-snvs.h            |   29 +++
 arch/arm/dts/imx6ull-pinfunc.h                 |   57 ++++++
 arch/arm/dts/imx6ull.dtsi                      | 1161
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx7-colibri.dts                  |   97 ++++++++++
 arch/arm/dts/imx7.dtsi                         |  194 ++++++++++++++++++++
 arch/arm/dts/imx7d-pinfunc.h                   | 1151
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/vf.dtsi                           |    4 +-
 arch/arm/imx-common/cpu.c                      |    2 +
 arch/arm/imx-common/init.c                     |    2 +-
 arch/arm/imx-common/iomux-v3.c                 |   13 +-
 arch/arm/imx-common/timer.c                    |    7 +-
 arch/arm/include/asm/arch-imx/cpu.h            |    3 +-
 arch/arm/include/asm/arch-mx6/crm_regs.h       |   60 +++++-
 arch/arm/include/asm/arch-mx6/imx-regs.h       |   18 +-
 arch/arm/include/asm/arch-mx6/mx6-pins.h       |    2 +
 arch/arm/include/asm/arch-mx6/mx6ull_pins.h    | 1065
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/imx-common/iomux-v3.h     |   19 +-
 arch/arm/include/asm/imx-common/sys_proto.h    |    1 +
 board/freescale/mx6sabresd/mx6sabresd.c        |  351
+++++++++++++++++++----------------
 board/freescale/mx6ullevk/Kconfig              |   12 ++
 board/freescale/mx6ullevk/MAINTAINERS          |    6 +
 board/freescale/mx6ullevk/Makefile             |    6 +
 board/freescale/mx6ullevk/imximage.cfg         |  116 ++++++++++++
 board/freescale/mx6ullevk/mx6ullevk.c          |   99 ++++++++++
 board/phytec/pcm052/Kconfig                    |   24 +++
 board/phytec/pcm052/pcm052.c                   |  206 +++++++++++++++------
 board/toradex/colibri_imx7/colibri_imx7.c      |   92 +++++-----
 board/udoo/README                              |   21 +++
 board/wandboard/spl.c                          |    6 +-
 common/image.c                                 |    1 +
 configs/bk4r1_defconfig                        |   33 ++++
 configs/colibri_imx7_defconfig                 |   10 +-
 configs/mx6ull_14x14_evk_defconfig             |   30 +++
 doc/README.imx6                                |    2 +-
 doc/device-tree-bindings/pmic/rn5t567.txt      |   17 ++
 doc/device-tree-bindings/serial/mxc-serial.txt |    8 +
 drivers/misc/mxc_ocotp.c                       |   52 +++++-
 drivers/mmc/fsl_esdhc.c                        |    1 +
 drivers/pinctrl/nxp/pinctrl-imx.c              |    2 +-
 drivers/pinctrl/nxp/pinctrl-imx6.c             |    5 +
 drivers/power/pmic/Kconfig                     |    8 +
 drivers/power/pmic/Makefile                    |    1 +
 drivers/power/pmic/rn5t567.c                   |   64 +++++++
 drivers/serial/serial_mxc.c                    |   32 +++-
 drivers/watchdog/imx_watchdog.c                |    2 +-
 include/configs/bk4r1.h                        |   33 ++++
 include/configs/colibri_imx7.h                 |    2 -
 include/configs/ge_bx50v3.h                    |    7 +-
 include/configs/mx6ullevk.h                    |  180 ++++++++++++++++++
 include/configs/pcm052.h                       |   78 +++++---
 include/configs/tbs2910.h                      |    4 +-
 include/configs/wandboard.h                    |   26 ---
 include/dt-bindings/clock/imx6ul-clock.h       |  253
+++++++++++++++++++++++++
 include/fsl_wdog.h                             |    1 +
 include/image.h                                |    1 +
 include/power/rn5t567_pmic.h                   |  113 ++++++++++++
 tools/Makefile                                 |    1 +
 tools/vybridimage.c                            |  164 +++++++++++++++++
 70 files changed, 7233 insertions(+), 389 deletions(-)
 create mode 100644 arch/arm/dts/bk4r1.dts
 create mode 100644 arch/arm/dts/imx6ul-pinfunc.h
 create mode 100644 arch/arm/dts/imx6ull-14x14-evk.dts
 create mode 100644 arch/arm/dts/imx6ull-pinfunc-snvs.h
 create mode 100644 arch/arm/dts/imx6ull-pinfunc.h
 create mode 100644 arch/arm/dts/imx6ull.dtsi
 create mode 100644 arch/arm/dts/imx7-colibri.dts
 create mode 100644 arch/arm/dts/imx7.dtsi
 create mode 100644 arch/arm/dts/imx7d-pinfunc.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6ull_pins.h
 create mode 100644 board/freescale/mx6ullevk/Kconfig
 create mode 100644 board/freescale/mx6ullevk/MAINTAINERS
 create mode 100644 board/freescale/mx6ullevk/Makefile
 create mode 100644 board/freescale/mx6ullevk/imximage.cfg
 create mode 100644 board/freescale/mx6ullevk/mx6ullevk.c
 create mode 100644 board/udoo/README
 create mode 100644 configs/bk4r1_defconfig
 create mode 100644 configs/mx6ull_14x14_evk_defconfig
 create mode 100644 doc/device-tree-bindings/pmic/rn5t567.txt
 create mode 100644 doc/device-tree-bindings/serial/mxc-serial.txt
 create mode 100644 drivers/power/pmic/rn5t567.c
 create mode 100644 include/configs/bk4r1.h
 create mode 100644 include/configs/mx6ullevk.h
 create mode 100644 include/dt-bindings/clock/imx6ul-clock.h
 create mode 100644 include/power/rn5t567_pmic.h
 create mode 100644 tools/vybridimage.c

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-09-06 15:27 ` Tom Rini
@ 2016-09-06 15:50   ` Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2016-09-06 15:50 UTC (permalink / raw)
  To: u-boot

Hi Tom,

On 06/09/2016 17:27, Tom Rini wrote:
> On Tue, Sep 06, 2016 at 10:51:05AM +0200, Stefano Babic wrote:
> 
>> Hi Tom,
>>
>> please pull from u-boot-imx, thanks !
>>
>> The following changes since commit 46fe9eb08812cc27a0d5cd97d97373c14d578fe9:
>>
>>   Merge branch 'master' of git://git.denx.de/u-boot-net (2016-08-23
>> 07:20:36 -0400)
>>
>> are available in the git repository at:
>>
>>   git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to 19c6e9ac4a43d7e261220e2de4bb1045165558c0:
>>
>>   mx6ul_14x14_ev: Enable the CCGR clocks earlier (2016-09-06 10:35:02 +0200)
> 
> OK, NAK.  This is breaking a whole bunch of imx6 boards (nitrogen6s1g is
> just the latest most in my build cycle, but I'm at 59 failed to build
> atm).  Since the release is next week, please give these a
> re-evaluation.  I think that perhaps:

Strange enough - I built with buildman and I do not get the same errors.
Let me check, I will move most of them to -next.

> 
>> Breno Lima (1):
>>       warp7: Modify fdt_file environment variable
>>
>> Christopher Spinrath (1):
>>       ARM: board: cm_fx6: fix mtd partition fixup
> [snip]
>> Fabio Estevam (9):
> [snip]
>>       warp: Fix RAM size runtime detection
> [snip]
>>       mx6ul_14x14_evk: Pass refsel and refr fields to avoid hang
>>       mx6ul_14x14_evk: Adjust SPL DDR3 settings
>>       mx6ul_14x14_ev: Enable the CCGR clocks earlier
> [snip]
>> Stefan Agner (11):
>>       mtd: nand: mxs: fix cache alignment for cache lines >32
> 
> and maybe a few others are the type of bugfixes we still want at this
> stage, thanks!
> 

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-09-06  8:51 Stefano Babic
@ 2016-09-06 15:27 ` Tom Rini
  2016-09-06 15:50   ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2016-09-06 15:27 UTC (permalink / raw)
  To: u-boot

On Tue, Sep 06, 2016 at 10:51:05AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 46fe9eb08812cc27a0d5cd97d97373c14d578fe9:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-net (2016-08-23
> 07:20:36 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 19c6e9ac4a43d7e261220e2de4bb1045165558c0:
> 
>   mx6ul_14x14_ev: Enable the CCGR clocks earlier (2016-09-06 10:35:02 +0200)

OK, NAK.  This is breaking a whole bunch of imx6 boards (nitrogen6s1g is
just the latest most in my build cycle, but I'm at 59 failed to build
atm).  Since the release is next week, please give these a
re-evaluation.  I think that perhaps:

> Breno Lima (1):
>       warp7: Modify fdt_file environment variable
> 
> Christopher Spinrath (1):
>       ARM: board: cm_fx6: fix mtd partition fixup
[snip]
> Fabio Estevam (9):
[snip]
>       warp: Fix RAM size runtime detection
[snip]
>       mx6ul_14x14_evk: Pass refsel and refr fields to avoid hang
>       mx6ul_14x14_evk: Adjust SPL DDR3 settings
>       mx6ul_14x14_ev: Enable the CCGR clocks earlier
[snip]
> Stefan Agner (11):
>       mtd: nand: mxs: fix cache alignment for cache lines >32

and maybe a few others are the type of bugfixes we still want at this
stage, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160906/ce6321ad/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-09-06  8:51 Stefano Babic
  2016-09-06 15:27 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-09-06  8:51 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 46fe9eb08812cc27a0d5cd97d97373c14d578fe9:

  Merge branch 'master' of git://git.denx.de/u-boot-net (2016-08-23
07:20:36 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 19c6e9ac4a43d7e261220e2de4bb1045165558c0:

  mx6ul_14x14_ev: Enable the CCGR clocks earlier (2016-09-06 10:35:02 +0200)

----------------------------------------------------------------
Akshay Bhat (1):
      arm: imx: Add support for Advantech DMS-BA16 board

Breno Lima (1):
      warp7: Modify fdt_file environment variable

Christopher Spinrath (1):
      ARM: board: cm_fx6: fix mtd partition fixup

Eric Nelson (1):
      mx6ul_14x14_evk: don't use array for SD2 card detect pad

Fabio Estevam (9):
      mx7dsabresd: Print secure/non-secure mode info
      warp: Fix RAM size runtime detection
      pico-imx6ul: Directly write to register LDOGCTL
      mx7dsabresd: Directly write to register LDOGCTL
      mx7dsabresd: Directly write to register LDOGCTL
      mx6: ddr: Allow changing REFSEL and REFR fields
      mx6ul_14x14_evk: Pass refsel and refr fields to avoid hang
      mx6ul_14x14_evk: Adjust SPL DDR3 settings
      mx6ul_14x14_ev: Enable the CCGR clocks earlier

Peng Fan (20):
      imx: mx6ull: add iomux header file
      imx: mx6ull: add mx6ull major cpu type
      imx-common: introduce is_mx6ull
      imx: ocotp: support i.MX6ULL
      imx: timer: update gpt driver for i.MX6ULL
      imx: mx6ull: skip setting ahb clock
      imx: mx6ul: using runtime check when configuring PMIC_STBY_REQ
      imx: mx6ull: misc soc update
      imx: mx6ull: adjust POR_B setting for i.MX6ULL
      imx: mx6ull: update clock settings and CCM register map
      imx: mx6ull: Update memory map address
      imx: mx6ull: Add AIPS3 initialization
      imx: imx6ull: adjust the ldo 1.2v bandgap voltage
      imx: iomux: fix snvs usage for i.MX6ULL
      pinctrl: imx6: support i.MX6ULL
      arm: dts: imx6ull: add pinctrl defines
      dt-bindings: add i.mx6ul clock header
      arm: dts: add device tree for i.MX6ULL
      dm: mmc: intialize dev when probe
      arm: imx: add i.MX6ULL 14x14 EVK board support

Soeren Moch (2):
      board: tbs2910: always enable usbkbd
      board: tbs2910: fix HDMI pre-console buffer

Stefan Agner (11):
      mtd: nand: mxs: fix cache alignment for cache lines >32
      dm: imx: serial: support device tree
      pinctrl: imx: do not announce driver initialization
      arm: dts: imx7: add pinctrl defines
      arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device tree
      colibri_imx7: remove legancy I2C support
      colibri_imx7: remove legancy UART platform data
      power: pmic: add Ricoh RN5T567 PMIC support
      arm: dts: imx7: add Ricoh RN5T567 PMIC node
      colibri_imx7: use Ricoh RN5T567 to reboot the board
      configs: enable device tree for Colibri iMX7

Stefano Babic (2):
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot

Tim Harvey (1):
      imx: ventana: enable splashscreen support

Vanessa Maegima (1):
      warp7: Add PMIC support

Ye Li (1):
      imx: mx6ull: add kconfig entry for MX6ULL
 arch/arm/cpu/armv7/mx6/Kconfig                    |   16 ++
 arch/arm/cpu/armv7/mx6/clock.c                    |   59 +++--
 arch/arm/cpu/armv7/mx6/ddr.c                      |    6 +-
 arch/arm/cpu/armv7/mx6/soc.c                      |   32 ++-
 arch/arm/dts/Makefile                             |    4 +
 arch/arm/dts/imx6ul-pinfunc.h                     |  938
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6ull-14x14-evk.dts                |  527
+++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6ull-pinfunc-snvs.h               |   29 +++
 arch/arm/dts/imx6ull-pinfunc.h                    |   57 +++++
 arch/arm/dts/imx6ull.dtsi                         | 1161
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx7-colibri.dts                     |   97 ++++++++
 arch/arm/dts/imx7.dtsi                            |  194 +++++++++++++++
 arch/arm/dts/imx7d-pinfunc.h                      | 1151
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/imx-common/cpu.c                         |    2 +
 arch/arm/imx-common/init.c                        |    2 +-
 arch/arm/imx-common/iomux-v3.c                    |   11 +-
 arch/arm/imx-common/timer.c                       |    7 +-
 arch/arm/include/asm/arch-imx/cpu.h               |    3 +-
 arch/arm/include/asm/arch-mx6/crm_regs.h          |   60 ++++-
 arch/arm/include/asm/arch-mx6/imx-regs.h          |   18 +-
 arch/arm/include/asm/arch-mx6/mx6-ddr.h           |    2 +
 arch/arm/include/asm/arch-mx6/mx6-pins.h          |    2 +
 arch/arm/include/asm/arch-mx6/mx6ull_pins.h       | 1065
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/imx-common/iomux-v3.h        |    6 +-
 arch/arm/include/asm/imx-common/sys_proto.h       |    1 +
 board/advantech/dms-ba16/Kconfig                  |   31 +++
 board/advantech/dms-ba16/MAINTAINERS              |    8 +
 board/advantech/dms-ba16/Makefile                 |    8 +
 board/advantech/dms-ba16/clocks.cfg               |   25 ++
 board/advantech/dms-ba16/ddr-setup.cfg            |   39 +++
 board/advantech/dms-ba16/dms-ba16.c               |  570
++++++++++++++++++++++++++++++++++++++++++++
 board/advantech/dms-ba16/dms-ba16_1g.cfg          |   25 ++
 board/advantech/dms-ba16/dms-ba16_2g.cfg          |   25 ++
 board/advantech/dms-ba16/micron-1g.cfg            |   63 +++++
 board/advantech/dms-ba16/samsung-2g.cfg           |   63 +++++
 board/bachmann/ot1200/ot1200_spl.c                |    2 +
 board/barco/platinum/spl_picon.c                  |    2 +
 board/barco/platinum/spl_titanium.c               |    2 +
 board/ccv/xpress/spl.c                            |    2 +
 board/compulab/cm_fx6/cm_fx6.c                    |    6 +-
 board/compulab/cm_fx6/spl.c                       |    4 +
 board/congatec/cgtqmx6eval/cgtqmx6eval.c          |    2 +
 board/el/el6x/el6x.c                              |    2 +
 board/freescale/mx6sabresd/mx6sabresd.c           |    2 +
 board/freescale/mx6slevk/mx6slevk.c               |    2 +
 board/freescale/mx6sxsabresd/mx6sxsabresd.c       |    2 +
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c |   50 ++--
 board/freescale/mx6ullevk/Kconfig                 |   12 +
 board/freescale/mx6ullevk/MAINTAINERS             |    6 +
 board/freescale/mx6ullevk/Makefile                |    6 +
 board/freescale/mx6ullevk/imximage.cfg            |  116 +++++++++
 board/freescale/mx6ullevk/mx6ullevk.c             |   99 ++++++++
 board/freescale/mx7dsabresd/mx7dsabresd.c         |   13 +-
 board/gateworks/gw_ventana/gw_ventana_spl.c       |    2 +
 board/kosagi/novena/novena_spl.c                  |    2 +
 board/phytec/pcm058/pcm058.c                      |    2 +
 board/solidrun/mx6cuboxi/mx6cuboxi.c              |    2 +
 board/technexion/pico-imx6ul/pico-imx6ul.c        |    4 +-
 board/toradex/colibri_imx7/colibri_imx7.c         |   92 ++++----
 board/udoo/udoo_spl.c                             |    2 +
 board/wandboard/spl.c                             |    6 +
 board/warp/imximage.cfg                           |  115 +++++++++
 board/warp7/warp7.c                               |   57 +++++
 configs/colibri_imx7_defconfig                    |   10 +-
 configs/dms-ba16-1g_defconfig                     |   34 +++
 configs/dms-ba16_defconfig                        |   33 +++
 configs/mx6ull_14x14_evk_defconfig                |   30 +++
 configs/warp_defconfig                            |    2 +-
 doc/device-tree-bindings/pmic/rn5t567.txt         |   17 ++
 doc/device-tree-bindings/serial/mxc-serial.txt    |    8 +
 drivers/misc/mxc_ocotp.c                          |   52 +++-
 drivers/mmc/fsl_esdhc.c                           |    1 +
 drivers/mtd/nand/mxs_nand.c                       |    5 +
 drivers/pinctrl/nxp/pinctrl-imx.c                 |    2 +-
 drivers/pinctrl/nxp/pinctrl-imx6.c                |    5 +
 drivers/power/pmic/Kconfig                        |    8 +
 drivers/power/pmic/Makefile                       |    1 +
 drivers/power/pmic/rn5t567.c                      |   64 +++++
 drivers/serial/serial_mxc.c                       |   28 ++-
 include/configs/advantech_dms-ba16.h              |  315
+++++++++++++++++++++++++
 include/configs/colibri_imx7.h                    |    3 +-
 include/configs/gw_ventana.h                      |    7 +-
 include/configs/mx6ullevk.h                       |  180 ++++++++++++++
 include/configs/tbs2910.h                         |   15 +-
 include/configs/warp7.h                           |   14 +-
 include/dt-bindings/clock/imx6ul-clock.h          |  253
++++++++++++++++++++
 include/power/rn5t567_pmic.h                      |  113 +++++++++
 tools/logos/gateworks.bmp                         |  Bin 0 -> 56202 bytes
 88 files changed, 7960 insertions(+), 161 deletions(-)
 create mode 100644 arch/arm/dts/imx6ul-pinfunc.h
 create mode 100644 arch/arm/dts/imx6ull-14x14-evk.dts
 create mode 100644 arch/arm/dts/imx6ull-pinfunc-snvs.h
 create mode 100644 arch/arm/dts/imx6ull-pinfunc.h
 create mode 100644 arch/arm/dts/imx6ull.dtsi
 create mode 100644 arch/arm/dts/imx7-colibri.dts
 create mode 100644 arch/arm/dts/imx7.dtsi
 create mode 100644 arch/arm/dts/imx7d-pinfunc.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6ull_pins.h
 create mode 100644 board/advantech/dms-ba16/Kconfig
 create mode 100644 board/advantech/dms-ba16/MAINTAINERS
 create mode 100644 board/advantech/dms-ba16/Makefile
 create mode 100644 board/advantech/dms-ba16/clocks.cfg
 create mode 100644 board/advantech/dms-ba16/ddr-setup.cfg
 create mode 100644 board/advantech/dms-ba16/dms-ba16.c
 create mode 100644 board/advantech/dms-ba16/dms-ba16_1g.cfg
 create mode 100644 board/advantech/dms-ba16/dms-ba16_2g.cfg
 create mode 100644 board/advantech/dms-ba16/micron-1g.cfg
 create mode 100644 board/advantech/dms-ba16/samsung-2g.cfg
 create mode 100644 board/freescale/mx6ullevk/Kconfig
 create mode 100644 board/freescale/mx6ullevk/MAINTAINERS
 create mode 100644 board/freescale/mx6ullevk/Makefile
 create mode 100644 board/freescale/mx6ullevk/imximage.cfg
 create mode 100644 board/freescale/mx6ullevk/mx6ullevk.c
 create mode 100644 board/warp/imximage.cfg
 create mode 100644 configs/dms-ba16-1g_defconfig
 create mode 100644 configs/dms-ba16_defconfig
 create mode 100644 configs/mx6ull_14x14_evk_defconfig
 create mode 100644 doc/device-tree-bindings/pmic/rn5t567.txt
 create mode 100644 doc/device-tree-bindings/serial/mxc-serial.txt
 create mode 100644 drivers/power/pmic/rn5t567.c
 create mode 100644 include/configs/advantech_dms-ba16.h
 create mode 100644 include/configs/mx6ullevk.h
 create mode 100644 include/dt-bindings/clock/imx6ul-clock.h
 create mode 100644 include/power/rn5t567_pmic.h
 create mode 100644 tools/logos/gateworks.bmp

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-07-28 11:56 Stefano Babic
@ 2016-07-29 13:29 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-07-29 13:29 UTC (permalink / raw)
  To: u-boot

On Thu, Jul 28, 2016 at 01:56:16PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx (master), thanks!
> 
> 
> The following changes since commit 19ce924ff914f315dc2fdf79f357825c513aed6e:
> 
>   Prepare v2016.07 (2016-07-11 15:01:01 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 77cbd3a14184c61d55d7fcddd88fa4e96efc9901:
> 
>   MAINTAINERS: i.MX: Add board/freescale/*mx* path (2016-07-28 13:27:22
> +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160729/3fa87b82/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-07-28 11:56 Stefano Babic
  2016-07-29 13:29 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-07-28 11:56 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx (master), thanks!


The following changes since commit 19ce924ff914f315dc2fdf79f357825c513aed6e:

  Prepare v2016.07 (2016-07-11 15:01:01 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 77cbd3a14184c61d55d7fcddd88fa4e96efc9901:

  MAINTAINERS: i.MX: Add board/freescale/*mx* path (2016-07-28 13:27:22
+0200)

----------------------------------------------------------------
Alexey Brodkin (1):
      wandboard: move environment partition farther from u-boot.img

Andrej Rosano (2):
      usbarmory: switch to using kernel zImage
      usbarmory: Add board_run_command() function

Breno Lima (7):
      warp7: Remove CONFIG_BOOTDELAY variable
      serial_mxc: Remove unconditional DCE setting
      Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also
for EXTFS"
      wandboard: Replace is_cpu_type() for macro
      mx6cuboxi: Replace is_mx6q() for macro
      cgtqmx6eval: Replace is_mx6q() for macro
      warp7: Move some USB configuration options to defconfig

Christopher Spinrath (5):
      ARM: board: cm-fx6: fix mmc for old revisions of utilite
      ARM: configs: cm_fx6: improve default environment
      fdt_support: define stub for fdt_fixup_mtdparts
      ARM: board: cm_fx6: fixup mtd partitions in the fdt
      ARM: configs: cm_fx6: add mtd support

Diego Dorta (3):
      pico-imx6ul: Add Ethernet support
      pico-imx6ul: Add NFS boot support
      mx6ul_14x14_evk: Remove unused define

Fabio Estevam (11):
      mx7: Place MX7_SEC option in Kconfig
      mx7dsabresd: Fix the boot of a NXP kernel
      mx6: clock: Fix the logic for reading axi_alt_sel
      mx7dsabresd_secure_defconfig: Use CONFIG_ARMV7_BOOT_SEC_DEFAULT
      warp: Use imx_ddr_size() for calculating the DDR size
      aristainetos: Use imx_ddr_size() for calculating the DDR size
      bx50v3: Use imx_ddr_size() for calculating the DDR size
      novena: Remove uneeded PHYS_SDRAM_SIZE
      cgtqmx6eval: Remove uneeded PHYS_SDRAM_SIZE
      mx7dsabresd: MAINTAINERS: Add mx7dsabresd_secure_defconfig
      MAINTAINERS: i.MX: Add board/freescale/*mx* path

Gilles Chanteperdrix (1):
      wandboard: enable SATA with imx6q

Hannes Schmelzer (2):
      driver/net/fec: support fixed speed connection
      arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite

Peng Fan (1):
      imx6: clock: typo fix

Petr Kulhavy (1):
      imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS

Stefan Agner (10):
      dm: imx: serial: Support DTE mode when using driver model
      usb: move CONFIG_USB_EHCI_MX7 to Kconfig
      usb: ehci-mx6: configure power polarity in usb_power_config
      usb: ehci-mx6: introduce config for high active power pin
      mx7: set soc environment according to exact SoC type
      mx7_common: Put display board info config into board file
      mx7_common: use Kconfig for ARMv7 non-secure mode
      imx_watchdog: add weak attribute to reset_cpu function
      colibri_imx7: add Colibri iMX7S/iMX7D module support
      mx7_common: initialize generic timer on all CPU's

Stefano Babic (7):
      pcie_imx: increment timeout for link up
      mx6: add support for el6x board
      mx6: Add Phytec PCM058 i.MX6 Quad
      Revert "arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite"
      Fix build for mx7dsabresd (secure config)
      mx6: wandboard: fix warning due to missing prototype
      pico-imx6ul: drop warning due to redefined

Tim Harvey (11):
      imx: ventana: add dt fixup for GW16082 irq mapping
      imx: ventana: add dt fixup for eth1 mac-address
      pci: allow disabling of pci init/enum via env
      imx: ventana: default pci to disabled
      imx: ventana: re-enable late board info display
      imx: ventana: make RS232 enable board specific
      imx: ventana: make number of digital I/O's dynamic
      imx: ventana: add extra DIO's for GW5520
      imx: ventana: make hwconfig initialize based on board configuration
      imx: ventana: refactor board-specific dt fixups (no functional change)
      imx: ventana: add dt fixup for watchdog external reset

Vanessa Maegima (8):
      mx6qsabreauto: Avoid hardcoded RAM size
      mx6slevk: Avoid hardcoded RAM size
      mx6sxsabreauto: Avoid hardcoded RAM size
      mx6sxsabresd: Avoid hardcoded RAM size
      pico-imx6ul: Add DFU support
      pico-imx6ul: Add a README file
      pico-imx6ul: Add USB Host support
      pico-imx6ul: Add PMIC support

 MAINTAINERS                                       |   1 +
 arch/arm/cpu/armv7/mx6/Kconfig                    |  18 ++++++
 arch/arm/cpu/armv7/mx6/clock.c                    |   6 +-
 arch/arm/cpu/armv7/mx7/Kconfig                    |   9 +++
 arch/arm/cpu/armv7/mx7/soc.c                      |  14 +++++
 board/aristainetos/aristainetos.c                 |   2 +-
 board/compulab/cm_fx6/cm_fx6.c                    |  20 ++++++-
 board/congatec/cgtqmx6eval/cgtqmx6eval.c          |  14 +----
 board/el/el6x/Kconfig                             |  25 ++++++++
 board/el/el6x/MAINTAINERS                         |   8 +++
 board/el/el6x/Makefile                            |   7 +++
 board/el/el6x/el6x.c                              | 640
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/freescale/mx6qsabreauto/mx6qsabreauto.c     |   2 +-
 board/freescale/mx6slevk/mx6slevk.c               |   2 +-
 board/freescale/mx6sxsabreauto/mx6sxsabreauto.c   |   2 +-
 board/freescale/mx6sxsabresd/mx6sxsabresd.c       |   2 +-
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c |   3 -
 board/freescale/mx7dsabresd/MAINTAINERS           |   1 +
 board/gateworks/gw_ventana/common.c               | 469
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------------------------
 board/gateworks/gw_ventana/common.h               |  10 ++--
 board/gateworks/gw_ventana/gw_ventana.c           | 473
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------
 board/ge/bx50v3/bx50v3.c                          |   2 +-
 board/inversepath/usbarmory/usbarmory.c           |  31 ++++++++++
 board/phytec/pcm058/Kconfig                       |  12 ++++
 board/phytec/pcm058/MAINTAINERS                   |   6 ++
 board/phytec/pcm058/Makefile                      |   9 +++
 board/phytec/pcm058/README                        |  35 +++++++++++
 board/phytec/pcm058/pcm058.c                      | 582
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/solidrun/mx6cuboxi/mx6cuboxi.c              |  12 +---
 board/technexion/pico-imx6ul/README               |  57 ++++++++++++++++++
 board/technexion/pico-imx6ul/pico-imx6ul.c        | 178
++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 board/toradex/colibri_imx7/Kconfig                |  20 +++++++
 board/toradex/colibri_imx7/MAINTAINERS            |   6 ++
 board/toradex/colibri_imx7/Makefile               |   6 ++
 board/toradex/colibri_imx7/colibri_imx7.c         | 420
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/toradex/colibri_imx7/imximage.cfg           | 150
+++++++++++++++++++++++++++++++++++++++++++++++
 board/wandboard/wandboard.c                       |  11 +++-
 board/warp/warp.c                                 |   2 +-
 configs/colibri_imx7_defconfig                    |  40 +++++++++++++
 configs/mx7dsabresd_defconfig                     |   3 +
 configs/mx7dsabresd_secure_defconfig              |  41 +++++++++++++
 configs/warp7_defconfig                           |  11 +++-
 configs/zc5202_defconfig                          |  22 +++++++
 configs/zc5601_defconfig                          |  22 +++++++
 doc/README.fec_mxc                                |   5 ++
 drivers/net/fec_mxc.c                             |   4 ++
 drivers/pci/pci.c                                 |   4 ++
 drivers/pci/pcie_imx.c                            |   2 +-
 drivers/serial/serial_mxc.c                       |   8 ++-
 drivers/usb/host/Kconfig                          |  16 +++++
 drivers/usb/host/ehci-mx6.c                       |  14 +++--
 drivers/watchdog/imx_watchdog.c                   |   2 +-
 include/configs/aristainetos-common.h             |   1 -
 include/configs/cgtqmx6eval.h                     |   1 -
 include/configs/cm_fx6.h                          |  31 ++++++++--
 include/configs/colibri_imx7.h                    | 247
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/configs/el6x_common.h                     | 139
+++++++++++++++++++++++++++++++++++++++++++
 include/configs/ge_bx50v3.h                       |   2 -
 include/configs/gw_ventana.h                      |   8 +--
 include/configs/mx6qsabreauto.h                   |   1 -
 include/configs/mx6slevk.h                        |   1 -
 include/configs/mx6sxsabreauto.h                  |   1 -
 include/configs/mx6sxsabresd.h                    |   1 -
 include/configs/mx7_common.h                      |  11 +---
 include/configs/mx7dsabresd.h                     |   4 +-
 include/configs/novena.h                          |   1 -
 include/configs/pcm058.h                          | 140
++++++++++++++++++++++++++++++++++++++++++++
 include/configs/pico-imx6ul.h                     |  68
++++++++++++++++-----
 include/configs/usbarmory.h                       |  19 +++---
 include/configs/wandboard.h                       |  14 ++++-
 include/configs/warp.h                            |   1 -
 include/configs/warp7.h                           |  13 +----
 include/configs/zc5202.h                          |  37 ++++++++++++
 include/configs/zc5601.h                          |  33 +++++++++++
 include/dm/platform_data/serial_mxc.h             |   1 +
 include/fdt_support.h                             |   6 ++
 78 files changed, 3882 insertions(+), 402 deletions(-)
 create mode 100644 board/el/el6x/Kconfig
 create mode 100644 board/el/el6x/MAINTAINERS
 create mode 100644 board/el/el6x/Makefile
 create mode 100644 board/el/el6x/el6x.c
 create mode 100644 board/phytec/pcm058/Kconfig
 create mode 100644 board/phytec/pcm058/MAINTAINERS
 create mode 100644 board/phytec/pcm058/Makefile
 create mode 100644 board/phytec/pcm058/README
 create mode 100644 board/phytec/pcm058/pcm058.c
 create mode 100644 board/technexion/pico-imx6ul/README
 create mode 100644 board/toradex/colibri_imx7/Kconfig
 create mode 100644 board/toradex/colibri_imx7/MAINTAINERS
 create mode 100644 board/toradex/colibri_imx7/Makefile
 create mode 100644 board/toradex/colibri_imx7/colibri_imx7.c
 create mode 100644 board/toradex/colibri_imx7/imximage.cfg
 create mode 100644 configs/colibri_imx7_defconfig
 create mode 100644 configs/mx7dsabresd_secure_defconfig
 create mode 100644 configs/pcm058_defconfig
 create mode 100644 configs/zc5202_defconfig
 create mode 100644 configs/zc5601_defconfig
 create mode 100644 include/configs/colibri_imx7.h
 create mode 100644 include/configs/el6x_common.h
 create mode 100644 include/configs/pcm058.h
 create mode 100644 include/configs/zc5202.h
 create mode 100644 include/configs/zc5601.h


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-06-18  9:14 Stefano Babic
@ 2016-06-19 14:12 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-06-19 14:12 UTC (permalink / raw)
  To: u-boot

On Sat, Jun 18, 2016 at 11:14:48AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx (master), thanks!
> 
> For i.MX contributors: I set a -next branch and I have applied what it
> is already ready to be merged. I will go on applying on -next until release.
> 
> The following changes since commit 6b3943f1b04be60f147ee540fbd72c4c7ea89f80:
> 
>   siemens,am33x: add draco etamin board (2016-06-09 13:53:13 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 67ef2c133f099d3d719058eb73aeec8f1574655c:
> 
>   warp7: Fix DFU support (2016-06-18 10:37:22 +0200)
> 

On top of the last PR (sorry), applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160619/538e54f3/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-06-07 16:44 Stefano Babic
  2016-06-18  9:12 ` Stefano Babic
@ 2016-06-19 14:02 ` Tom Rini
  1 sibling, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-06-19 14:02 UTC (permalink / raw)
  To: u-boot

On Tue, Jun 07, 2016 at 06:44:26PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit d7d000311285e4b8d11e089ca13ea456a01be3b8:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-mips (2016-05-23
> 11:51:37 -0400)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to d2ba7a6adcef6e6f8c4418c7b0caf9d7ab98a6d4:
> 
>   arm: mxs: Remove misleading comments (2016-06-07 18:23:51 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160619/41753ff8/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-06-18  9:14 Stefano Babic
  2016-06-19 14:12 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-06-18  9:14 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx (master), thanks!

For i.MX contributors: I set a -next branch and I have applied what it
is already ready to be merged. I will go on applying on -next until release.

The following changes since commit 6b3943f1b04be60f147ee540fbd72c4c7ea89f80:

  siemens,am33x: add draco etamin board (2016-06-09 13:53:13 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 67ef2c133f099d3d719058eb73aeec8f1574655c:

  warp7: Fix DFU support (2016-06-18 10:37:22 +0200)

----------------------------------------------------------------
Andrew Shadura (6):
      board: ge: bx50v3: don't configure the backlight when there's no
display
      board: ge: bx50v3: make CONFIG_VIDEO optional and disabled by default
      board: ge: bx50v3: make USB support optional and disabled by default
      board: ge: bx50v3: make network support optional and disabled by
default
      board: ge: bx50v3: make SATA optional and disabled by default
      board: ge: bx50v3: disable unused features to improve size and
boot speed

Damien Riegel (1):
      ts4800: update environment to boot with device tree

Fabio Estevam (1):
      warp7: Fix DFU support

Kimmo Surakka (1):
      board: ge: bx50v3: add missing partnum variable

Marco Franchi (3):
      mx6sabresd: Allow LVDS backlight to be functional after a kernel
reboot
      warp7: Fix watchdog reset
      warp7: Add README file

Michael Heimpold (1):
      arm: mxs: Remove misleading comments

Peng Fan (21):
      imx: correct speed grading info for i.MX6UL
      imx-common: introduce simpler macros for runtime dection
      imx: mx6: support i.MX6SOLO when enable/disable_ldb_di_clock_sources
      imx: mx6: use simpler runtime cpu dection macros
      imx-common: hab: support i.MX6SOLO
      imx-common: use simpler runtime cpu dection macros
      imx: mx6: ddr: support i.MX6D/QPlus
      imx: mx6: correct get_cpu_speed_grade_hz for i.MX6DQP
      imx-common: hab: support i.MX6DQPlus
      imx-common: sata: return failure if not i.MX6DQPlus
      imx-common: timer: support i.MX6DQPlus
      mtd: nand: mxs: use simpler runtime cpu dection macros
      ocotp: mxc: use simpler runtime cpu dection macros
      net: fec_mxc: use simpler runtime cpu dection macros
      block: dwc_ahsata: support i.MX6DQPlus
      board: mx6sabresd/auto: use simpler runtime cpu dection macros
      imx: mx6qsabreauto: drop duplicated net phy configuration
      imx: mx7: implement reset_misc
      imx6ulevk: fix 74LV OE usage
      imx6ulevk: fix LCD_nPWREN setting
      imx: mx6ulevk: change QSPI PAD DSE to 120ohm

Sebastien Bourdelin (2):
      ts4800: add CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
      cosmetic: mx6slevk: Minor coding-style fix

Stefano Babic (2):
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot

Tim Harvey (22):
      imx: ventana: config: remove redundant config
      imx: ventana: gsc: remove dependence on env
      imx: ventana: use EEPROM register for falcon boot mode
      imx: ventana: remove SPL_EXT_SUPPORT
      imx: ventana: config: add env vars for disk and part
      imx: ventana: config: add fixfdt script to apply manual fdt fixups
      imx: ventana: config: use bootdir env var for directory of fdt files
      imx: ventana: config: use fs env var for block dev filesystem type
      imx: ventana: config: use explicit addr in loadscript
      imx: ventana: config: add PREBOOT support
      imx: ventana: SPL: only disable boot watchdog if Falcon mode
      imx: ventana: SPL: added support for 32bit IMX6DQ 8Gb density DRAM
config
      imx: ventana: gsc: add gsc sleep command
      imx: ventana: gsc: fix negative temperature readings
      imx: ventana: gsc: show board temp on boot
      imx: ventana: export backlight gpio after gpio driver is available
      imx: ventana: fix invalid dio configuration for pwm mode
      imx: ventana: enable pwm device-tree property based on hwconfig
      imx: ventana: remove dependence on EECONFIG_SATA eeprom feature bit
      imx: ventana: remove several EEPROM config bit dependence
      imx: ventana: add GW553x support
      imx: ventana: add fdt fixup to enable UHS-I support on selected boards

Ye Li (1):
      mx7dsabresd: Fix LCD_PWR_EN output setting

 arch/arm/cpu/arm926ejs/mxs/mxs.c                  |   4 ++--
 arch/arm/cpu/armv7/mx6/clock.c                    |  42
+++++++++++++++++++-----------------------
 arch/arm/cpu/armv7/mx6/ddr.c                      |  10 ++++------
 arch/arm/cpu/armv7/mx6/soc.c                      |  26
++++++++++++++++++++------
 arch/arm/cpu/armv7/mx7/soc.c                      |   8 ++++++++
 arch/arm/imx-common/hab.c                         |  53
+++++++++++++++++++++++------------------------------
 arch/arm/imx-common/init.c                        |   5 ++---
 arch/arm/imx-common/iomux-v3.c                    |   2 +-
 arch/arm/imx-common/sata.c                        |   2 +-
 arch/arm/imx-common/timer.c                       |  11 +++--------
 arch/arm/include/asm/imx-common/sys_proto.h       |   8 ++++++++
 board/freescale/mx6qsabreauto/mx6qsabreauto.c     |  37
++-----------------------------------
 board/freescale/mx6sabresd/mx6sabresd.c           |  22
++++++++++++++++++----
 board/freescale/mx6slevk/mx6slevk.c               |  16 ++++++++--------
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c |   8 +++-----
 board/freescale/mx7dsabresd/mx7dsabresd.c         |   2 +-
 board/gateworks/gw_ventana/README                 |  17 ++++++-----------
 board/gateworks/gw_ventana/common.c               | 100
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------
 board/gateworks/gw_ventana/common.h               |   3 +++
 board/gateworks/gw_ventana/eeprom.c               |  34
+++-------------------------------
 board/gateworks/gw_ventana/gsc.c                  |  61
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++----
 board/gateworks/gw_ventana/gw_ventana.c           |  69
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------
 board/gateworks/gw_ventana/gw_ventana_spl.c       |  45
+++++++++++++++++++++++++++++++++++++++++----
 board/gateworks/gw_ventana/ventana_eeprom.h       |   1 +
 board/ge/bx50v3/bx50v3.c                          |   3 +++
 board/warp7/README                                |  63
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/warp7/warp7.c                               |  21
+++++++++++++++++++++
 configs/ge_b450v3_defconfig                       |  12 ++++++------
 configs/ge_b650v3_defconfig                       |  12 ++++++------
 configs/ge_b850v3_defconfig                       |  12 ++++++------
 drivers/block/dwc_ahsata.c                        |   2 +-
 drivers/misc/mxc_ocotp.c                          |   4 ++--
 drivers/mtd/nand/mxs_nand.c                       |   2 +-
 drivers/net/fec_mxc.c                             |   2 +-
 include/configs/ge_bx50v3.h                       |  41
++++++++++++++++++++++++++++-------------
 include/configs/gw_ventana.h                      |  42
+++++++++++++++++++++++++-----------------
 include/configs/ts4800.h                          |  19 +++++++++++++++----
 include/configs/warp7.h                           |   8 +++-----
 38 files changed, 566 insertions(+), 263 deletions(-)
 create mode 100644 board/warp7/README


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-06-07 16:44 Stefano Babic
@ 2016-06-18  9:12 ` Stefano Babic
  2016-06-19 14:02 ` Tom Rini
  1 sibling, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2016-06-18  9:12 UTC (permalink / raw)
  To: u-boot

Hi Tom,

I have seen that this was not yet pulled. I added just a few of fixes
and I send a new PR.

Regards,
Stefano


On 07/06/2016 18:44, Stefano Babic wrote:
> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit d7d000311285e4b8d11e089ca13ea456a01be3b8:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-mips (2016-05-23
> 11:51:37 -0400)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to d2ba7a6adcef6e6f8c4418c7b0caf9d7ab98a6d4:
> 
>   arm: mxs: Remove misleading comments (2016-06-07 18:23:51 +0200)
> 
> ----------------------------------------------------------------
> Andrew Shadura (6):
>       board: ge: bx50v3: don't configure the backlight when there's no
> display
>       board: ge: bx50v3: make CONFIG_VIDEO optional and disabled by default
>       board: ge: bx50v3: make USB support optional and disabled by default
>       board: ge: bx50v3: make network support optional and disabled by
> default
>       board: ge: bx50v3: make SATA optional and disabled by default
>       board: ge: bx50v3: disable unused features to improve size and
> boot speed
> 
> Damien Riegel (1):
>       ts4800: update environment to boot with device tree
> 
> Kimmo Surakka (1):
>       board: ge: bx50v3: add missing partnum variable
> 
> Michael Heimpold (1):
>       arm: mxs: Remove misleading comments
> 
> Peng Fan (18):
>       imx: correct speed grading info for i.MX6UL
>       imx-common: introduce simpler macros for runtime dection
>       imx: mx6: support i.MX6SOLO when enable/disable_ldb_di_clock_sources
>       imx: mx6: use simpler runtime cpu dection macros
>       imx-common: hab: support i.MX6SOLO
>       imx-common: use simpler runtime cpu dection macros
>       imx: mx6: ddr: support i.MX6D/QPlus
>       imx: mx6: correct get_cpu_speed_grade_hz for i.MX6DQP
>       imx-common: hab: support i.MX6DQPlus
>       imx-common: sata: return failure if not i.MX6DQPlus
>       imx-common: timer: support i.MX6DQPlus
>       mtd: nand: mxs: use simpler runtime cpu dection macros
>       ocotp: mxc: use simpler runtime cpu dection macros
>       net: fec_mxc: use simpler runtime cpu dection macros
>       block: dwc_ahsata: support i.MX6DQPlus
>       board: mx6sabresd/auto: use simpler runtime cpu dection macros
>       imx: mx6qsabreauto: drop duplicated net phy configuration
>       imx: mx7: implement reset_misc
> 
> Sebastien Bourdelin (2):
>       ts4800: add CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
>       cosmetic: mx6slevk: Minor coding-style fix
> 
> Stefano Babic (1):
>       Merge branch 'master' of git://git.denx.de/u-boot
> 
> Tim Harvey (22):
>       imx: ventana: config: remove redundant config
>       imx: ventana: gsc: remove dependence on env
>       imx: ventana: use EEPROM register for falcon boot mode
>       imx: ventana: remove SPL_EXT_SUPPORT
>       imx: ventana: config: add env vars for disk and part
>       imx: ventana: config: add fixfdt script to apply manual fdt fixups
>       imx: ventana: config: use bootdir env var for directory of fdt files
>       imx: ventana: config: use fs env var for block dev filesystem type
>       imx: ventana: config: use explicit addr in loadscript
>       imx: ventana: config: add PREBOOT support
>       imx: ventana: SPL: only disable boot watchdog if Falcon mode
>       imx: ventana: SPL: added support for 32bit IMX6DQ 8Gb density DRAM
> config
>       imx: ventana: gsc: add gsc sleep command
>       imx: ventana: gsc: fix negative temperature readings
>       imx: ventana: gsc: show board temp on boot
>       imx: ventana: export backlight gpio after gpio driver is available
>       imx: ventana: fix invalid dio configuration for pwm mode
>       imx: ventana: enable pwm device-tree property based on hwconfig
>       imx: ventana: remove dependence on EECONFIG_SATA eeprom feature bit
>       imx: ventana: remove several EEPROM config bit dependence
>       imx: ventana: add GW553x support
>       imx: ventana: add fdt fixup to enable UHS-I support on selected boards
> 
>  arch/arm/cpu/arm926ejs/mxs/mxs.c              |   4 ++--
>  arch/arm/cpu/armv7/mx6/clock.c                |  42
> ++++++++++++++++------------------
>  arch/arm/cpu/armv7/mx6/ddr.c                  |  10 ++++----
>  arch/arm/cpu/armv7/mx6/soc.c                  |  26 ++++++++++++++++-----
>  arch/arm/cpu/armv7/mx7/soc.c                  |   8 +++++++
>  arch/arm/imx-common/hab.c                     |  53
> +++++++++++++++++++-----------------------
>  arch/arm/imx-common/init.c                    |   5 ++--
>  arch/arm/imx-common/iomux-v3.c                |   2 +-
>  arch/arm/imx-common/sata.c                    |   2 +-
>  arch/arm/imx-common/timer.c                   |  11 +++------
>  arch/arm/include/asm/imx-common/sys_proto.h   |   8 +++++++
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c |  37
> ++----------------------------
>  board/freescale/mx6sabresd/mx6sabresd.c       |   4 ++--
>  board/freescale/mx6slevk/mx6slevk.c           |  16 ++++++-------
>  board/gateworks/gw_ventana/README             |  17 +++++---------
>  board/gateworks/gw_ventana/common.c           | 100
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------
>  board/gateworks/gw_ventana/common.h           |   3 +++
>  board/gateworks/gw_ventana/eeprom.c           |  34
> +++------------------------
>  board/gateworks/gw_ventana/gsc.c              |  61
> +++++++++++++++++++++++++++++++++++++++++++++----
>  board/gateworks/gw_ventana/gw_ventana.c       |  69
> ++++++++++++++++++++++++++++++++++++++++++++++++++-----
>  board/gateworks/gw_ventana/gw_ventana_spl.c   |  45
> ++++++++++++++++++++++++++++++++----
>  board/gateworks/gw_ventana/ventana_eeprom.h   |   1 +
>  board/ge/bx50v3/bx50v3.c                      |   3 +++
>  configs/ge_b450v3_defconfig                   |  12 +++++-----
>  configs/ge_b650v3_defconfig                   |  12 +++++-----
>  configs/ge_b850v3_defconfig                   |  12 +++++-----
>  drivers/block/dwc_ahsata.c                    |   2 +-
>  drivers/misc/mxc_ocotp.c                      |   4 ++--
>  drivers/mtd/nand/mxs_nand.c                   |   2 +-
>  drivers/net/fec_mxc.c                         |   2 +-
>  include/configs/ge_bx50v3.h                   |  41
> ++++++++++++++++++++++-----------
>  include/configs/gw_ventana.h                  |  42
> ++++++++++++++++++++--------------
>  include/configs/ts4800.h                      |  19 ++++++++++++----
>  33 files changed, 459 insertions(+), 250 deletions(-)
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-06-07 16:44 Stefano Babic
  2016-06-18  9:12 ` Stefano Babic
  2016-06-19 14:02 ` Tom Rini
  0 siblings, 2 replies; 307+ messages in thread
From: Stefano Babic @ 2016-06-07 16:44 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit d7d000311285e4b8d11e089ca13ea456a01be3b8:

  Merge branch 'master' of git://git.denx.de/u-boot-mips (2016-05-23
11:51:37 -0400)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to d2ba7a6adcef6e6f8c4418c7b0caf9d7ab98a6d4:

  arm: mxs: Remove misleading comments (2016-06-07 18:23:51 +0200)

----------------------------------------------------------------
Andrew Shadura (6):
      board: ge: bx50v3: don't configure the backlight when there's no
display
      board: ge: bx50v3: make CONFIG_VIDEO optional and disabled by default
      board: ge: bx50v3: make USB support optional and disabled by default
      board: ge: bx50v3: make network support optional and disabled by
default
      board: ge: bx50v3: make SATA optional and disabled by default
      board: ge: bx50v3: disable unused features to improve size and
boot speed

Damien Riegel (1):
      ts4800: update environment to boot with device tree

Kimmo Surakka (1):
      board: ge: bx50v3: add missing partnum variable

Michael Heimpold (1):
      arm: mxs: Remove misleading comments

Peng Fan (18):
      imx: correct speed grading info for i.MX6UL
      imx-common: introduce simpler macros for runtime dection
      imx: mx6: support i.MX6SOLO when enable/disable_ldb_di_clock_sources
      imx: mx6: use simpler runtime cpu dection macros
      imx-common: hab: support i.MX6SOLO
      imx-common: use simpler runtime cpu dection macros
      imx: mx6: ddr: support i.MX6D/QPlus
      imx: mx6: correct get_cpu_speed_grade_hz for i.MX6DQP
      imx-common: hab: support i.MX6DQPlus
      imx-common: sata: return failure if not i.MX6DQPlus
      imx-common: timer: support i.MX6DQPlus
      mtd: nand: mxs: use simpler runtime cpu dection macros
      ocotp: mxc: use simpler runtime cpu dection macros
      net: fec_mxc: use simpler runtime cpu dection macros
      block: dwc_ahsata: support i.MX6DQPlus
      board: mx6sabresd/auto: use simpler runtime cpu dection macros
      imx: mx6qsabreauto: drop duplicated net phy configuration
      imx: mx7: implement reset_misc

Sebastien Bourdelin (2):
      ts4800: add CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
      cosmetic: mx6slevk: Minor coding-style fix

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot

Tim Harvey (22):
      imx: ventana: config: remove redundant config
      imx: ventana: gsc: remove dependence on env
      imx: ventana: use EEPROM register for falcon boot mode
      imx: ventana: remove SPL_EXT_SUPPORT
      imx: ventana: config: add env vars for disk and part
      imx: ventana: config: add fixfdt script to apply manual fdt fixups
      imx: ventana: config: use bootdir env var for directory of fdt files
      imx: ventana: config: use fs env var for block dev filesystem type
      imx: ventana: config: use explicit addr in loadscript
      imx: ventana: config: add PREBOOT support
      imx: ventana: SPL: only disable boot watchdog if Falcon mode
      imx: ventana: SPL: added support for 32bit IMX6DQ 8Gb density DRAM
config
      imx: ventana: gsc: add gsc sleep command
      imx: ventana: gsc: fix negative temperature readings
      imx: ventana: gsc: show board temp on boot
      imx: ventana: export backlight gpio after gpio driver is available
      imx: ventana: fix invalid dio configuration for pwm mode
      imx: ventana: enable pwm device-tree property based on hwconfig
      imx: ventana: remove dependence on EECONFIG_SATA eeprom feature bit
      imx: ventana: remove several EEPROM config bit dependence
      imx: ventana: add GW553x support
      imx: ventana: add fdt fixup to enable UHS-I support on selected boards

 arch/arm/cpu/arm926ejs/mxs/mxs.c              |   4 ++--
 arch/arm/cpu/armv7/mx6/clock.c                |  42
++++++++++++++++------------------
 arch/arm/cpu/armv7/mx6/ddr.c                  |  10 ++++----
 arch/arm/cpu/armv7/mx6/soc.c                  |  26 ++++++++++++++++-----
 arch/arm/cpu/armv7/mx7/soc.c                  |   8 +++++++
 arch/arm/imx-common/hab.c                     |  53
+++++++++++++++++++-----------------------
 arch/arm/imx-common/init.c                    |   5 ++--
 arch/arm/imx-common/iomux-v3.c                |   2 +-
 arch/arm/imx-common/sata.c                    |   2 +-
 arch/arm/imx-common/timer.c                   |  11 +++------
 arch/arm/include/asm/imx-common/sys_proto.h   |   8 +++++++
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |  37
++----------------------------
 board/freescale/mx6sabresd/mx6sabresd.c       |   4 ++--
 board/freescale/mx6slevk/mx6slevk.c           |  16 ++++++-------
 board/gateworks/gw_ventana/README             |  17 +++++---------
 board/gateworks/gw_ventana/common.c           | 100
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------
 board/gateworks/gw_ventana/common.h           |   3 +++
 board/gateworks/gw_ventana/eeprom.c           |  34
+++------------------------
 board/gateworks/gw_ventana/gsc.c              |  61
+++++++++++++++++++++++++++++++++++++++++++++----
 board/gateworks/gw_ventana/gw_ventana.c       |  69
++++++++++++++++++++++++++++++++++++++++++++++++++-----
 board/gateworks/gw_ventana/gw_ventana_spl.c   |  45
++++++++++++++++++++++++++++++++----
 board/gateworks/gw_ventana/ventana_eeprom.h   |   1 +
 board/ge/bx50v3/bx50v3.c                      |   3 +++
 configs/ge_b450v3_defconfig                   |  12 +++++-----
 configs/ge_b650v3_defconfig                   |  12 +++++-----
 configs/ge_b850v3_defconfig                   |  12 +++++-----
 drivers/block/dwc_ahsata.c                    |   2 +-
 drivers/misc/mxc_ocotp.c                      |   4 ++--
 drivers/mtd/nand/mxs_nand.c                   |   2 +-
 drivers/net/fec_mxc.c                         |   2 +-
 include/configs/ge_bx50v3.h                   |  41
++++++++++++++++++++++-----------
 include/configs/gw_ventana.h                  |  42
++++++++++++++++++++--------------
 include/configs/ts4800.h                      |  19 ++++++++++++----
 33 files changed, 459 insertions(+), 250 deletions(-)

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-05-19 12:08 ` Tom Rini
@ 2016-05-19 12:49   ` Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2016-05-19 12:49 UTC (permalink / raw)
  To: u-boot

On 19/05/2016 14:08, Tom Rini wrote:
> On Tue, May 17, 2016 at 05:57:32PM +0200, Stefano Babic wrote:
> 
>> Hi Tom,
>>
>> please pull from u-boot-imx, thanks !
>>
>> The following changes since commit aeaec0e682f45b9e0c62c522fafea353931f73ed:
>>
>>   Prepare v2016.05 (2016-05-16 10:40:32 -0400)
>>
>> are available in the git repository at:
>>
>>   git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to 291000894ed4d6257830baba547764b86e335b5c:
>>
>>   ARM: mx6: Enable MMC and SATA extfs boot support (2016-05-17 17:52:20
>> +0200)
>>
> 
> Applied to u-boot/master, thanks!
> 
> But please note that this broke gwventana and that needs a minor follow
> up to fix, please do so, thanks!
> 

I see - I check it this issue, thanks !

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-05-17 15:57 Stefano Babic
@ 2016-05-19 12:08 ` Tom Rini
  2016-05-19 12:49   ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2016-05-19 12:08 UTC (permalink / raw)
  To: u-boot

On Tue, May 17, 2016 at 05:57:32PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit aeaec0e682f45b9e0c62c522fafea353931f73ed:
> 
>   Prepare v2016.05 (2016-05-16 10:40:32 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 291000894ed4d6257830baba547764b86e335b5c:
> 
>   ARM: mx6: Enable MMC and SATA extfs boot support (2016-05-17 17:52:20
> +0200)
> 

Applied to u-boot/master, thanks!

But please note that this broke gwventana and that needs a minor follow
up to fix, please do so, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160519/5b71c2f3/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-05-17 15:57 Stefano Babic
  2016-05-19 12:08 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-05-17 15:57 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit aeaec0e682f45b9e0c62c522fafea353931f73ed:

  Prepare v2016.05 (2016-05-16 10:40:32 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 291000894ed4d6257830baba547764b86e335b5c:

  ARM: mx6: Enable MMC and SATA extfs boot support (2016-05-17 17:52:20
+0200)

----------------------------------------------------------------
Adrian Alonso (1):
      imx: tools: imximage: fix CLR bit command

Eric Nelson (1):
      imx: mx6: mx6sl_pins: add GPIO variant for SD1_DAT5

Fabio Estevam (1):
      mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT

Marek Vasut (4):
      ARM: mx6: Enable STDIO deregistering on Novena
      SPL: Let spl_parse_image_header() return value
      SPL: Add CONFIG_SPL_ABORT_ON_RAW_IMAGE
      ARM: mx6: Enable MMC and SATA extfs boot support

Peng Fan (1):
      video: ipu_common: fix build error

Stefan Agner (3):
      imx: iomux-v3: fix UART input selects
      imx: imx7d: fix ahb clock mux 1
      imx: imx-common: print i.MX 7 SoC names consistently

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot

 README                                     |  4 ++++
 arch/arm/cpu/armv7/mx7/clock_slice.c       |  2 +-
 arch/arm/imx-common/cpu.c                  |  2 +-
 arch/arm/include/asm/arch-mx6/mx6sl_pins.h |  1 +
 arch/arm/include/asm/arch-mx7/mx7d_pins.h  |  8 ++++----
 common/spl/spl.c                           |  6 +++++-
 common/spl/spl_ext.c                       |  6 +++++-
 common/spl/spl_fat.c                       |  4 +++-
 common/spl/spl_mmc.c                       |  6 +++++-
 common/spl/spl_nand.c                      |  9 +++++++--
 common/spl/spl_net.c                       |  4 +---
 common/spl/spl_nor.c                       |  9 +++++++--
 common/spl/spl_onenand.c                   |  5 ++++-
 common/spl/spl_ymodem.c                    |  7 +++++--
 drivers/mtd/spi/spi_spl_load.c             | 10 ++++++++--
 drivers/video/ipu_common.c                 |  4 +++-
 include/configs/imx6_spl.h                 |  4 ++++
 include/configs/novena.h                   |  2 +-
 include/configs/tqma6.h                    |  1 -
 include/spl.h                              |  2 +-
 tools/imximage.c                           |  2 +-
 21 files changed, 71 insertions(+), 27 deletions(-)

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-04-25 12:26 Stefano Babic
@ 2016-04-26  0:15 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-04-26  0:15 UTC (permalink / raw)
  To: u-boot

On Mon, Apr 25, 2016 at 02:26:47PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 108f8418597350bd98357f25acaa8ab8a0435779:
> 
>   ARM: rpi: fix 64-bit CONFIG_SYS_TEXT_BASE (2016-04-16 09:02:17 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 69cc7dbf1f62492788ab810db7d8444a623c23c2:
> 
>   Add initial support for Technexion's PICO-IMX6UL-EMMC board
> (2016-04-19 16:37:36 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160425/19e3b8bd/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-04-25 12:26 Stefano Babic
  2016-04-26  0:15 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-04-25 12:26 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 108f8418597350bd98357f25acaa8ab8a0435779:

  ARM: rpi: fix 64-bit CONFIG_SYS_TEXT_BASE (2016-04-16 09:02:17 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 69cc7dbf1f62492788ab810db7d8444a623c23c2:

  Add initial support for Technexion's PICO-IMX6UL-EMMC board
(2016-04-19 16:37:36 +0200)

----------------------------------------------------------------
Akshay Bhat (5):
      imx: mx6: Fix procedure to switch the parent of LDB_DI_CLK
      board: ge: bx50v3: Split display setup function
      board: ge: bx50v3: Setup LDB_DI_CLK source
      board: ge: bx50v3: Use pwm for display backlight
      board: ge: bx50v3: Fix to meet LVDS display power on timing

Fabio Estevam (2):
      MX6UL: Add definition for UART6 base address
      Add initial support for Technexion's PICO-IMX6UL-EMMC board

Justin Waters (1):
      board: ge: bx50v3: Disable unused pins

Marek Vasut (1):
      arm: mx5: Fix NAND image generation

 arch/arm/cpu/armv7/mx6/Kconfig             |   5 ++
 arch/arm/cpu/armv7/mx6/clock.c             | 151
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/imx-common/Makefile               |   2 +-
 arch/arm/include/asm/arch-mx6/clock.h      |   9 ++++
 arch/arm/include/asm/arch-mx6/imx-regs.h   |   1 +
 board/ge/bx50v3/bx50v3.c                   | 183
++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------
 board/technexion/pico-imx6ul/Kconfig       |  15 ++++++
 board/technexion/pico-imx6ul/MAINTAINERS   |   7 +++
 board/technexion/pico-imx6ul/Makefile      |   7 +++
 board/technexion/pico-imx6ul/imximage.cfg  |  97
+++++++++++++++++++++++++++++++++++++
 board/technexion/pico-imx6ul/pico-imx6ul.c | 119
+++++++++++++++++++++++++++++++++++++++++++++
 configs/pico-imx6ul_defconfig              |   5 ++
 include/configs/ge_bx50v3.h                |   3 ++
 include/configs/pico-imx6ul.h              | 140
+++++++++++++++++++++++++++++++++++++++++++++++++++++
 14 files changed, 698 insertions(+), 46 deletions(-)
 create mode 100644 board/technexion/pico-imx6ul/Kconfig
 create mode 100644 board/technexion/pico-imx6ul/MAINTAINERS
 create mode 100644 board/technexion/pico-imx6ul/Makefile
 create mode 100644 board/technexion/pico-imx6ul/imximage.cfg
 create mode 100644 board/technexion/pico-imx6ul/pico-imx6ul.c
 create mode 100644 configs/pico-imx6ul_defconfig
 create mode 100644 include/configs/pico-imx6ul.h



-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-04-13 10:23 Stefano Babic
@ 2016-04-13 19:47 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-04-13 19:47 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 13, 2016 at 12:23:37PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit e4fb863f6dec0002069d57422ebe3ce3af69a273:
> 
>   dm: blk: Add tests for block devices (2016-03-17 21:27:39 -0600)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 59c9e9b408014025cfa158a98aeafbcf33aa2d3d:
> 
>   mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations
> (2016-04-03 19:18:45 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160413/011ab5ac/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-04-13 10:23 Stefano Babic
  2016-04-13 19:47 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-04-13 10:23 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit e4fb863f6dec0002069d57422ebe3ce3af69a273:

  dm: blk: Add tests for block devices (2016-03-17 21:27:39 -0600)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 59c9e9b408014025cfa158a98aeafbcf33aa2d3d:

  mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations
(2016-04-03 19:18:45 +0200)

----------------------------------------------------------------
Akshay Bhat (1):
      arm: imx: Add support for GE Bx50v3 boards

Fabio Estevam (10):
      mx7_common: Remove unexisting options
      mx7dsabresd: Define serial port locally
      mx7: Distinguish between dual and solo versions
      mx6sabre_common: Fix U-Boot corruption after 'saveenv'
      mx6sabresd: Use VESA 1024x768 timings
      mx7_common: Put early/late init configs into board file
      warp7: Add initial support
      mx6sabresd: Remove unneeded enable_lvds() function
      warp7: Pass the UART base definition
      mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file

Leonid Iziumtsev (1):
      mx27: 16-bit wide watchdog registers

Marek Vasut (3):
      arm: mx5: Enable NAND TrimFFS on M53EVK
      arm: imx6: Switch DDR3 calibration to wait_for_bit()
      arm: mxs: Update MX28EVK config

Peng Fan (5):
      imx: mx6ul: skip setting ahb rate
      imx: mx6ul configure the PMIC_STBY_REQ pin as open drain
      imx: print ARM clock for clocks command
      imx: mx6sx: move MX6SX to Kconfig entry
      imx: mx7d: move MX7D to Kconfig entry

Stefan Roese (2):
      arm: mx6: Add UART8 base address for i.MX6UL
      arm: mx6: Add CCV xPress board support

Stefano Babic (1):
      Merge branch 'next'

Tom Rini (2):
      mx6qarm2: imximage_mx6dl.cfg update to fix tINIT3 violation
      mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations

Ye Li (1):
      imx: mx6: Fix incorrect clear mmdc_ch0 handshake mask

 arch/arm/cpu/arm926ejs/mx27/reset.c         |   8 +-
 arch/arm/cpu/armv7/mx6/Kconfig              |  23 ++
 arch/arm/cpu/armv7/mx6/clock.c              |   1 +
 arch/arm/cpu/armv7/mx6/ddr.c                |  44 +--
 arch/arm/cpu/armv7/mx6/soc.c                |  36 +-
 arch/arm/cpu/armv7/mx7/Kconfig              |   8 +
 arch/arm/cpu/armv7/mx7/soc.c                |  18 +
 arch/arm/imx-common/cpu.c                   |   2 +
 arch/arm/include/asm/arch-imx/cpu.h         |   1 +
 arch/arm/include/asm/arch-mx27/imx-regs.h   |   6 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h    |   1 +
 board/ccv/xpress/Kconfig                    |  12 +
 board/ccv/xpress/MAINTAINERS                |   7 +
 board/ccv/xpress/Makefile                   |   8 +
 board/ccv/xpress/imximage.cfg               | 176 +++++++++
 board/ccv/xpress/spl.c                      | 116 ++++++
 board/ccv/xpress/xpress.c                   | 331 +++++++++++++++++
 board/freescale/mx6qarm2/imximage_mx6dl.cfg |   4 +-
 board/freescale/mx6sabresd/mx6sabresd.c     |  40 +--
 board/freescale/mx6slevk/imximage.cfg       |   4 +-
 board/ge/bx50v3/Kconfig                     |  18 +
 board/ge/bx50v3/MAINTAINERS                 |   8 +
 board/ge/bx50v3/Makefile                    |   8 +
 board/ge/bx50v3/bx50v3.c                    | 533
++++++++++++++++++++++++++++
 board/ge/bx50v3/bx50v3.cfg                  | 151 ++++++++
 board/warp7/Kconfig                         |   9 +
 board/warp7/MAINTAINERS                     |   6 +
 board/warp7/Makefile                        |   6 +
 board/warp7/imximage.cfg                    |  95 +++++
 board/warp7/warp7.c                         | 102 ++++++
 configs/ge_b450v3_defconfig                 |   8 +
 configs/ge_b650v3_defconfig                 |   8 +
 configs/ge_b850v3_defconfig                 |   8 +
 configs/mx28evk_defconfig                   |   1 +
 configs/mx6sxsabreauto_defconfig            |   2 +-
 configs/mx6sxsabresd_defconfig              |   2 +-
 configs/mx6sxsabresd_spl_defconfig          |   2 +-
 configs/mx7dsabresd_defconfig               |   2 +-
 configs/warp7_defconfig                     |  12 +
 configs/xpress_defconfig                    |   6 +
 configs/xpress_spl_defconfig                |   7 +
 include/configs/ge_bx50v3.h                 | 349 ++++++++++++++++++
 include/configs/m53evk.h                    |   1 +
 include/configs/mx28evk.h                   |   3 +
 include/configs/mx6sabre_common.h           |   2 +-
 include/configs/mx7_common.h                |  10 -
 include/configs/mx7dsabresd.h               |   8 +
 include/configs/warp7.h                     | 155 ++++++++
 include/configs/xpress.h                    | 166 +++++++++
 49 files changed, 2442 insertions(+), 92 deletions(-)
 create mode 100644 board/ccv/xpress/Kconfig
 create mode 100644 board/ccv/xpress/MAINTAINERS
 create mode 100644 board/ccv/xpress/Makefile
 create mode 100644 board/ccv/xpress/imximage.cfg
 create mode 100644 board/ccv/xpress/spl.c
 create mode 100644 board/ccv/xpress/xpress.c
 create mode 100644 board/ge/bx50v3/Kconfig
 create mode 100644 board/ge/bx50v3/MAINTAINERS
 create mode 100644 board/ge/bx50v3/Makefile
 create mode 100644 board/ge/bx50v3/bx50v3.c
 create mode 100644 board/ge/bx50v3/bx50v3.cfg
 create mode 100644 board/warp7/Kconfig
 create mode 100644 board/warp7/MAINTAINERS
 create mode 100644 board/warp7/Makefile
 create mode 100644 board/warp7/imximage.cfg
 create mode 100644 board/warp7/warp7.c
 create mode 100644 configs/ge_b450v3_defconfig
 create mode 100644 configs/ge_b650v3_defconfig
 create mode 100644 configs/ge_b850v3_defconfig
 create mode 100644 configs/warp7_defconfig
 create mode 100644 configs/xpress_defconfig
 create mode 100644 configs/xpress_spl_defconfig
 create mode 100644 include/configs/ge_bx50v3.h
 create mode 100644 include/configs/warp7.h
 create mode 100644 include/configs/xpress.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-03-02 13:57 Stefano Babic
@ 2016-03-02 23:14 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-03-02 23:14 UTC (permalink / raw)
  To: u-boot

On Wed, Mar 02, 2016 at 02:57:07PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> some small fixes for release. Please pull from u-boot-imx, thanks !
> 
> The following changes since commit 0156782feb7fb105b8e69de00c23d3eb60c4e3db:
> 
>   Prepare v2016.03-rc3 (2016-02-29 17:44:13 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to b112b007162f5d7d523b135b413a37ced15793f9:
> 
>   board: tbs2910: Fix eMMC BOOTCFG value (2016-03-02 14:51:05 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160302/3a55aa32/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-03-02 13:57 Stefano Babic
  2016-03-02 23:14 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-03-02 13:57 UTC (permalink / raw)
  To: u-boot

Hi Tom,

some small fixes for release. Please pull from u-boot-imx, thanks !

The following changes since commit 0156782feb7fb105b8e69de00c23d3eb60c4e3db:

  Prepare v2016.03-rc3 (2016-02-29 17:44:13 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to b112b007162f5d7d523b135b413a37ced15793f9:

  board: tbs2910: Fix eMMC BOOTCFG value (2016-03-02 14:51:05 +0100)

----------------------------------------------------------------
Bhuvanchandra DV (1):
      colibri-vf: Disable pull-up configuration in GPIO pin mux

Fabio Estevam (3):
      MAINTAINERS: Update Peng Fan's email address
      mx6qarm2: Update maintainer's emails
      mx53ard: Move to booting zImage

Soeren Moch (1):
      board: tbs2910: Fix eMMC BOOTCFG value

 arch/arm/include/asm/arch-vf610/iomux-vf610.h |  2 +-
 board/freescale/mx6qarm2/MAINTAINERS          |  4 ++--
 board/freescale/mx6qsabreauto/MAINTAINERS     |  2 +-
 board/freescale/mx6slevk/MAINTAINERS          |  2 +-
 board/freescale/mx6ul_14x14_evk/MAINTAINERS   |  2 +-
 board/tbs/tbs2910/tbs2910.c                   |  2 +-
 include/configs/mx53ard.h                     | 18 ++++++++++--------
 7 files changed, 17 insertions(+), 15 deletions(-)


Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-02-04  9:44 Stefano Babic
@ 2016-02-04 17:39 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-02-04 17:39 UTC (permalink / raw)
  To: u-boot

On Thu, Feb 04, 2016 at 10:44:26AM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> 
> The following changes since commit 44189a032804c4a16632f4e80abf77f2820e9a48:
> 
>   Prepare v2016.03-rc1 (2016-02-02 11:29:50 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to fb0d042814e6ea3463ee335523222f91d891d084:
> 
>   imx: mx6: implement board_mmc_get_env_dev (2016-02-04 10:13:53 +0100)
> 

So, with reservation:
Applied to u-boot/master, thanks!

Because this breaks ls1021aqds_*nor_lpuart.  But it's likely an easy fix
that should be done rather than keeping legacy code around
(5160def267739518950e8e3bb78e0e6c3941cb3e is the culprit for the
breakage).

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160204/da5be9f2/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-02-04  9:44 Stefano Babic
  2016-02-04 17:39 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-02-04  9:44 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !


The following changes since commit 44189a032804c4a16632f4e80abf77f2820e9a48:

  Prepare v2016.03-rc1 (2016-02-02 11:29:50 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to fb0d042814e6ea3463ee335523222f91d891d084:

  imx: mx6: implement board_mmc_get_env_dev (2016-02-04 10:13:53 +0100)

----------------------------------------------------------------
Bhuvanchandra DV (9):
      arm: vybrid: Enable lpuart support
      arm: vybrid: Update the license string
      arm: colibri-vf: Enable serial support
      arm: vf610-twr: Add device tree file's
      arm: pcm052: Add device tree file's
      arm: vybrid: Update defconfig's
      arm: vybrid: Drop enabling GPIO, SPI and UART in legacy mode
      dm: lpuart: Drop the legacy code
      dm: vybrid_gpio: Drop legacy code

Bin Meng (1):
      tools: mxsboot: Use more portable cpu_to_le32()

Fabio Estevam (3):
      mx6slevk: Fix the reset delay for the the LAN8720 PHY
      tqma6_wru4: Fix the reset delay for the the LAN8720 PHY
      mx6slevk: Remove CONFIG_ETHPRIME option

Marek Vasut (2):
      arm: imx6: Add DDR3 calibration code for MX6 Q/D/DL
      arm: imx6: Enable DDR calibration on Novena

Peng Fan (3):
      imx: mx7dsabresd: move mmc_get_env_devno to soc code
      imx: mx6: implement mmc_get_env_dev
      imx: mx6: implement board_mmc_get_env_dev

Peter Robinson (1):
      wandboard: fix variable name so PXE boot works

Ye Li (6):
      mx6: soc: Add ENET2 mac address support
      imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO board
      imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failure
      imx: mx6sx: Fix issue in LCDIF clock enablement
      imx: mx6ul/sx: Fix issue in LCDIF clock dividers calculation
      imx: mx6sxsabresd: Add MCIMX28LCD display support

 arch/arm/cpu/armv7/mx6/Kconfig                  |   6 +
 arch/arm/cpu/armv7/mx6/clock.c                  |   8 +-
 arch/arm/cpu/armv7/mx6/ddr.c                    | 559
++++++++++++++++++++++++
 arch/arm/cpu/armv7/mx6/soc.c                    |  64 ++-
 arch/arm/cpu/armv7/mx7/soc.c                    |  21 +
 arch/arm/dts/Makefile                           |   4 +-
 arch/arm/dts/pcm052.dts                         |  22 +
 arch/arm/dts/vf-colibri.dtsi                    |  15 +-
 arch/arm/dts/vf.dtsi                            |  48 +-
 arch/arm/dts/vf500-colibri.dts                  |   5 -
 arch/arm/dts/vf610-colibri.dts                  |   5 -
 arch/arm/dts/vf610-twr.dts                      |  22 +
 arch/arm/include/asm/arch-mx6/imx-regs.h        |  23 +-
 arch/arm/include/asm/arch-mx6/mx6-ddr.h         |   5 +
 board/freescale/mx6qarm2/mx6qarm2.c             |   5 +
 board/freescale/mx6sabresd/mx6sabresd.c         |   7 +-
 board/freescale/mx6slevk/mx6slevk.c             |   7 +-
 board/freescale/mx6sxsabreauto/Kconfig          |  12 +
 board/freescale/mx6sxsabreauto/MAINTAINERS      |   6 +
 board/freescale/mx6sxsabreauto/Makefile         |   6 +
 board/freescale/mx6sxsabreauto/imximage.cfg     | 136 ++++++
 board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 508 +++++++++++++++++++++
 board/freescale/mx6sxsabresd/mx6sxsabresd.c     |  66 +++
 board/freescale/mx7dsabresd/mx7dsabresd.c       |  20 +-
 board/kosagi/novena/novena_spl.c                |  23 +-
 board/tqc/tqma6/tqma6_wru4.c                    |   2 +-
 configs/colibri_vf_defconfig                    |   8 +
 configs/colibri_vf_dtb_defconfig                |  14 -
 configs/mx6sxsabreauto_defconfig                |  11 +
 configs/pcm052_defconfig                        |   7 +
 configs/vf610twr_defconfig                      |   7 +
 configs/vf610twr_nand_defconfig                 |   7 +
 doc/README.imx6                                 |   5 +-
 drivers/gpio/vybrid_gpio.c                      |  18 -
 drivers/serial/serial_lpuart.c                  | 101 +----
 include/configs/colibri_vf.h                    |  13 -
 include/configs/mx6slevk.h                      |   1 -
 include/configs/mx6sxsabreauto.h                | 212 +++++++++
 include/configs/mx6sxsabresd.h                  |  20 +
 include/configs/pcm052.h                        |   3 -
 include/configs/vf610twr.h                      |   3 -
 include/configs/wandboard.h                     |   2 +-
 tools/mxsboot.c                                 |  18 +-
 43 files changed, 1810 insertions(+), 245 deletions(-)
 create mode 100644 arch/arm/dts/pcm052.dts
 create mode 100644 arch/arm/dts/vf610-twr.dts
 create mode 100644 board/freescale/mx6sxsabreauto/Kconfig
 create mode 100644 board/freescale/mx6sxsabreauto/MAINTAINERS
 create mode 100644 board/freescale/mx6sxsabreauto/Makefile
 create mode 100644 board/freescale/mx6sxsabreauto/imximage.cfg
 create mode 100644 board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
 delete mode 100644 configs/colibri_vf_dtb_defconfig
 create mode 100644 configs/mx6sxsabreauto_defconfig
 create mode 100644 include/configs/mx6sxsabreauto.h



-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-01-25 14:07 Stefano Babic
@ 2016-01-25 21:27 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-01-25 21:27 UTC (permalink / raw)
  To: u-boot

On Mon, Jan 25, 2016 at 03:07:33PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 12f229ea8f6c8e20f8fd07906eafc853c4c354a9:
> 
>   Merge git://git.denx.de/u-boot-fdt (2016-01-22 17:01:22 -0500)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to ed3fb1fb22fb9e0e786c58c2d80cd030b89b9b7d:
> 
>   imx: spl: enable CONFIG_SPL_WATCHDOG_SUPPORT (2016-01-25 10:03:17 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160125/f819e578/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-01-25 14:07 Stefano Babic
  2016-01-25 21:27 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-01-25 14:07 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 12f229ea8f6c8e20f8fd07906eafc853c4c354a9:

  Merge git://git.denx.de/u-boot-fdt (2016-01-22 17:01:22 -0500)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to ed3fb1fb22fb9e0e786c58c2d80cd030b89b9b7d:

  imx: spl: enable CONFIG_SPL_WATCHDOG_SUPPORT (2016-01-25 10:03:17 +0100)

----------------------------------------------------------------
Fabio Estevam (1):
      mx25pdk: Remove lowlevel_init.S file

Peng Fan (10):
      imx: mx6ulevk: change mtest memory size to 128M
      imx: mx6/7 enlarge CONFIG_SYS_BOOTM_LEN to 16M
      imx: mx6ulevk: add CONFIG_SPI_FLASH_STMICRO
      imx: apbh_dma: Update APBH-DMA for MX7D
      imx: nand: update GPMI NAND driver to support MX7
      imx: mx7dsabresd: support nand
      imx: mx6: add more entry for mxc_ccm_reg
      imx: mx6ul/sx: fix mmdc_ch0 clk calculation
      imx: mx7: default enable MDIO open drain
      imx: spl: enable CONFIG_SPL_WATCHDOG_SUPPORT

 arch/arm/cpu/armv7/mx6/clock.c              |  61 ++++++++++++++--
 arch/arm/cpu/armv7/mx7/soc.c                |  20 ++++++
 arch/arm/include/asm/arch-mx6/crm_regs.h    | 103
++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7/imx-regs.h    |   2 +
 arch/arm/include/asm/imx-common/dma.h       |   2 +-
 arch/arm/include/asm/imx-common/regs-apbh.h |   6 +-
 arch/arm/include/asm/imx-common/regs-bch.h  |   4 +-
 board/freescale/mx25pdk/Makefile            |   1 -
 board/freescale/mx25pdk/lowlevel_init.S     |  10 ---
 board/freescale/mx25pdk/mx25pdk.c           |   3 +
 board/freescale/mx7dsabresd/mx7dsabresd.c   |  39 +++++++++++
 drivers/dma/apbh_dma.c                      |   2 +-
 drivers/mtd/nand/mxs_nand.c                 |   4 +-
 include/configs/imx6_spl.h                  |   1 +
 include/configs/mx6_common.h                |   2 +
 include/configs/mx6ul_14x14_evk.h           |   3 +-
 include/configs/mx7_common.h                |   2 +
 include/configs/mx7dsabresd.h               |  25 +++++++
 18 files changed, 265 insertions(+), 25 deletions(-)
 delete mode 100644 board/freescale/mx25pdk/lowlevel_init.S


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-01-09 19:15 ` Fabio Estevam
@ 2016-01-10  9:54   ` Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2016-01-10  9:54 UTC (permalink / raw)
  To: u-boot

Hi Fabio, Otavio,

On 09/01/2016 20:15, Fabio Estevam wrote:
> Hi Stefano,
> 
> On Fri, Jan 8, 2016 at 1:08 PM, Stefano Babic <sbabic@denx.de> wrote:
>> Hi Tom,
>>
>> just a few fixes for release. Pleas epull from u-boot-imx, thanks !
> 
> There are some more fixes that would be good to have for 2016.01:
> https://patchwork.ozlabs.org/patch/562905/

This I missed, sorry. Got it.

> https://patchwork.ozlabs.org/patch/563983/
> https://patchwork.ozlabs.org/patch/564401/
> 

Agree - specially Otavio's patch for documentation avoid to kill the SPI
flash simply following the instructions. I applied it.


> Do you plan to submit another pull request? If not, maybe Tom could
> pick these directly.
> 

Tom, of course you can apply them yourself - but if it is easier for
you, I have applied all three patches and I send now my PR for them.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-01-08 15:08 Stefano Babic
  2016-01-09  3:34 ` Tom Rini
@ 2016-01-09 19:15 ` Fabio Estevam
  2016-01-10  9:54   ` Stefano Babic
  1 sibling, 1 reply; 307+ messages in thread
From: Fabio Estevam @ 2016-01-09 19:15 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Fri, Jan 8, 2016 at 1:08 PM, Stefano Babic <sbabic@denx.de> wrote:
> Hi Tom,
>
> just a few fixes for release. Pleas epull from u-boot-imx, thanks !

There are some more fixes that would be good to have for 2016.01:
https://patchwork.ozlabs.org/patch/562905/
https://patchwork.ozlabs.org/patch/563983/
https://patchwork.ozlabs.org/patch/564401/

Do you plan to submit another pull request? If not, maybe Tom could
pick these directly.

Thanks

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-01-08 15:08 Stefano Babic
@ 2016-01-09  3:34 ` Tom Rini
  2016-01-09 19:15 ` Fabio Estevam
  1 sibling, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-01-09  3:34 UTC (permalink / raw)
  To: u-boot

On Fri, Jan 08, 2016 at 04:08:28PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> just a few fixes for release. Pleas epull from u-boot-imx, thanks !
> 
> The following changes since commit 3861d784b1a470570a0098ac5c25d79e3073c0d9:
> 
>   Merge git://git.denx.de/u-boot-mpc85xx (2016-01-07 11:24:27 -0500)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 587c3f8ebe356b558f1876414885c1b4a31294ab:
> 
>   imx_watchdog: always set minimal timeout in reset_cpu (2016-01-07
> 17:54:53 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160108/b1630228/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-01-08 15:08 Stefano Babic
  2016-01-09  3:34 ` Tom Rini
  2016-01-09 19:15 ` Fabio Estevam
  0 siblings, 2 replies; 307+ messages in thread
From: Stefano Babic @ 2016-01-08 15:08 UTC (permalink / raw)
  To: u-boot

Hi Tom,

just a few fixes for release. Pleas epull from u-boot-imx, thanks !

The following changes since commit 3861d784b1a470570a0098ac5c25d79e3073c0d9:

  Merge git://git.denx.de/u-boot-mpc85xx (2016-01-07 11:24:27 -0500)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 587c3f8ebe356b558f1876414885c1b4a31294ab:

  imx_watchdog: always set minimal timeout in reset_cpu (2016-01-07
17:54:53 +0100)

----------------------------------------------------------------
Andrey Skvortsov (1):
      imx_watchdog: always set minimal timeout in reset_cpu

Fabio Estevam (3):
      phy: atheros: Use ar8035_config for AR8031
      mx6sabresd: Simplify the Ethernet PHY configuration
      wandboard: Simplify the Ethernet PHY configuration

M?ns Rullg?rd (1):
      gpio: mxs: add name_to_gpio() function

Peng Fan (2):
      imx: mx6ul: disable VIDEO for SPL
      imx: mx7: fix the temperature checking for Rev1.1

Ye.Li (1):
      pfuze: Fix unsigned variable for less-than-zero comparison

 board/freescale/common/pfuze.c          |  3 ++-
 board/freescale/mx6sabresd/mx6sabresd.c | 36
++----------------------------------
 board/wandboard/wandboard.c             | 36
++----------------------------------
 drivers/gpio/mxs_gpio.c                 | 15 +++++++++++++++
 drivers/net/phy/atheros.c               |  2 +-
 drivers/thermal/imx_thermal.c           | 23 +++++++++++++++--------
 drivers/watchdog/imx_watchdog.c         |  2 +-
 include/configs/mx6ul_14x14_evk.h       |  2 ++
 include/fsl_wdog.h                      |  1 +
 9 files changed, 41 insertions(+), 79 deletions(-)

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2016-01-03 15:23 Stefano Babic
@ 2016-01-04 15:50 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2016-01-04 15:50 UTC (permalink / raw)
  To: u-boot

On Sun, Jan 03, 2016 at 04:23:32PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> my first PR of the year ! Please pull from u-boot-imx, thanks !
> 
> The following changes since commit 1d149eddcc0661b683002f76a8240491eba00dbb:
> 
>   dm: Add timeline and guide for porting serial drivers (2015-11-20
> 13:59:54 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to ccf4326bac0371774265be0a8b13c150b445e703:
> 
>   imx: mx6qsabreauto: support lvds display (2016-01-03 16:03:14 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160104/575e4d25/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2016-01-03 15:23 Stefano Babic
  2016-01-04 15:50 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2016-01-03 15:23 UTC (permalink / raw)
  To: u-boot

Hi Tom,

my first PR of the year ! Please pull from u-boot-imx, thanks !

The following changes since commit 1d149eddcc0661b683002f76a8240491eba00dbb:

  dm: Add timeline and guide for porting serial drivers (2015-11-20
13:59:54 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to ccf4326bac0371774265be0a8b13c150b445e703:

  imx: mx6qsabreauto: support lvds display (2016-01-03 16:03:14 +0100)

----------------------------------------------------------------
Eric Nelson (1):
      ARM: imx: fsl_esdhc: fix usage of low 4 bits of sysctl register

Fabio Estevam (1):
      mx6sxsabresd: Fix Ethernet PHY reset sequence

Gong Qianyu (1):
      i2c: mxc: add a condition in case the parameter is NULL

Jeroen Hofstee (1):
      imx: mx6: add missing return value

Marek Vasut (3):
      arm: mx6: Reduce SPL malloc pool size
      arm: imx6: novena, gw_ventana: Fix use of pfuze100 bit definitions
      arm: imx6: novena: Enable extfs support in SPL

Maximilian Schwerin (1):
      serial_mxc: Fix setup of UARTx_UFCR register

Michael Heimpold (2):
      ARM: mxs: fix VDDD brownout setting
      ARM: mxs: allow boards to select DC-DC switching clock source

Michael Schanz (1):
      cgtqmx6eval: fix pad configuration for SPI bus

M?ns Rullg?rd (2):
      net: fec_mxc: configure MDIO hold time
      net: fec_mxc: unregister mdio bus on probe error

Otavio Salvador (7):
      cgtqmx6eval: Add SPI NOR flash support
      cgtqmx6eval: Use SPI NOR to store the environment
      cgtqmx6eval: Add fastboot support
      cgtqmx6eval: Add SPL support
      iomux-v3: Take MX6D in consideration for imx_iomux_v3_setup_pad()
      cgtqmx6eval: Add DFU support
      cgtqmx6eval: Fix defconfig name

Peng Fan (5):
      video: ipu: simplify if else code
      imx: mx7: enable CONFIG_FSL_CLK
      imx: mx6: fix reg base address when runtime usage
      imx: ddr: drop duplicated debug info
      imx: mx6qsabreauto: support lvds display

Sanchayan Maity (1):
      colibri_vf: Add board_usb_phy_mode function

Stefano Babic (1):
      imx_common: check for Serial Downloader in spl_boot_device

Vagrant Cascadian (1):
      arm: novena: Switch novena to config_distro_bootcmd

Ye.Li (1):
      mx6: clock: Modify GPMI clock to support mx6sx

 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c               |  38 ++++++++++-
 arch/arm/cpu/armv7/mx6/Kconfig                            |   3 +
 arch/arm/cpu/armv7/mx6/clock.c                            |  14 ++++
 arch/arm/cpu/armv7/mx6/ddr.c                              |   1 -
 arch/arm/imx-common/spl.c                                 |   8 +++
 arch/arm/include/asm/arch-mx6/imx-regs.h                  |   8 +--
 arch/arm/include/asm/arch-mxs/sys_proto.h                 |   2 +
 arch/arm/include/asm/imx-common/iomux-v3.h                |   2 +-
 board/congatec/cgtqmx6eval/MAINTAINERS                    |   2 +-
 board/congatec/cgtqmx6eval/README                         |  78
++++++++++++++++------
 board/congatec/cgtqmx6eval/cgtqmx6eval.c                  | 599
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------
 board/congatec/cgtqmx6eval/imximage.cfg                   | 143
-----------------------------------------
 board/freescale/mx6qsabreauto/mx6qsabreauto.c             |  87
++++++++++++++++++++++++-
 board/freescale/mx6sxsabresd/mx6sxsabresd.c               |  10 ++-
 board/gateworks/gw_ventana/common.c                       |   2 +-
 board/kosagi/novena/novena.c                              |   2 +-
 board/toradex/colibri_vf/colibri_vf.c                     |  33 +++++++++-
 configs/{cgtqmx6qeval_defconfig => cgtqmx6eval_defconfig} |   5 +-
 doc/README.imx6                                           |  51
+++++++++++++++
 drivers/i2c/mxc_i2c.c                                     |  12 +++-
 drivers/mmc/fsl_esdhc.c                                   |  15 ++++-
 drivers/net/fec_mxc.c                                     |  20 +++++-
 drivers/serial/serial_mxc.c                               |   9 ++-
 drivers/video/ipu_disp.c                                  |   4 +-
 include/configs/cgtqmx6eval.h                             |  68
++++++++++++++++++--
 include/configs/imx6_spl.h                                |   6 +-
 include/configs/mx7_common.h                              |   2 +
 include/configs/novena.h                                  |  24 ++++++-
 include/fsl_esdhc.h                                       |   2 +
 29 files changed, 956 insertions(+), 294 deletions(-)
 delete mode 100644 board/congatec/cgtqmx6eval/imximage.cfg
 rename configs/{cgtqmx6qeval_defconfig => cgtqmx6eval_defconfig} (72%)


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-12-04 11:57 Stefano Babic
@ 2015-12-04 22:51 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-12-04 22:51 UTC (permalink / raw)
  To: u-boot

On Fri, Dec 04, 2015 at 12:57:22PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 1d149eddcc0661b683002f76a8240491eba00dbb:
> 
>   dm: Add timeline and guide for porting serial drivers (2015-11-20
> 13:59:54 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to a80a999c9b5c128cad2f67b4b32036bd4d667904:
> 
>   arm: imx6: novena: Enable extfs support in SPL (2015-12-01 16:11:08 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151204/d6bb7976/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-12-04 11:57 Stefano Babic
  2015-12-04 22:51 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-12-04 11:57 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 1d149eddcc0661b683002f76a8240491eba00dbb:

  dm: Add timeline and guide for porting serial drivers (2015-11-20
13:59:54 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to a80a999c9b5c128cad2f67b4b32036bd4d667904:

  arm: imx6: novena: Enable extfs support in SPL (2015-12-01 16:11:08 +0100)

----------------------------------------------------------------
Marek Vasut (3):
      arm: mx6: Reduce SPL malloc pool size
      arm: imx6: novena, gw_ventana: Fix use of pfuze100 bit definitions
      arm: imx6: novena: Enable extfs support in SPL

Michael Heimpold (1):
      ARM: mxs: fix VDDD brownout setting

Otavio Salvador (6):
      cgtqmx6eval: Add SPI NOR flash support
      cgtqmx6eval: Use SPI NOR to store the environment
      cgtqmx6eval: Add fastboot support
      cgtqmx6eval: Add SPL support
      iomux-v3: Take MX6D in consideration for imx_iomux_v3_setup_pad()
      cgtqmx6eval: Add DFU support

Peng Fan (1):
      video: ipu: simplify if else code

Sanchayan Maity (1):
      colibri_vf: Add board_usb_phy_mode function

Ye.Li (1):
      mx6: clock: Modify GPMI clock to support mx6sx

 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c               |   4 +-
 arch/arm/cpu/armv7/mx6/Kconfig                            |   3 +
 arch/arm/cpu/armv7/mx6/clock.c                            |  12 +++
 arch/arm/include/asm/imx-common/iomux-v3.h                |   2 +-
 board/congatec/cgtqmx6eval/README                         |  78
+++++++++++++----
 board/congatec/cgtqmx6eval/cgtqmx6eval.c                  | 599
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------
 board/congatec/cgtqmx6eval/imximage.cfg                   | 143
------------------------------
 board/gateworks/gw_ventana/common.c                       |   2 +-
 board/kosagi/novena/novena.c                              |   2 +-
 board/toradex/colibri_vf/colibri_vf.c                     |  33 ++++++-
 configs/{cgtqmx6qeval_defconfig => cgtqmx6eval_defconfig} |   5 +-
 drivers/video/ipu_disp.c                                  |   4 +-
 include/configs/cgtqmx6eval.h                             |  68
++++++++++++--
 include/configs/imx6_spl.h                                |   6 +-
 include/configs/novena.h                                  |   1 +
 15 files changed, 689 insertions(+), 273 deletions(-)
 delete mode 100644 board/congatec/cgtqmx6eval/imximage.cfg
 rename configs/{cgtqmx6qeval_defconfig => cgtqmx6eval_defconfig} (72%)


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-11-16 11:26 Stefano Babic
@ 2015-11-16 17:59 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-11-16 17:59 UTC (permalink / raw)
  To: u-boot

On Mon, Nov 16, 2015 at 12:26:53PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks!
> 
> The following changes since commit 038be18fd95aa6283eafb85ceabc0b880976424b:
> 
>   nios2: add 3c120 and 10m50 devboards MAINTAINERS (2015-11-12 08:26:59
> +0800)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to ec26c1eef735befb7011c24e08e6310ab6dc9be6:
> 
>   arm: mx6: cm-fx6: add splash locations to cm-fx6 (2015-11-16 12:01:36
> +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151116/c9f56d98/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-11-16 11:26 Stefano Babic
  2015-11-16 17:59 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-11-16 11:26 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks!

The following changes since commit 038be18fd95aa6283eafb85ceabc0b880976424b:

  nios2: add 3c120 and 10m50 devboards MAINTAINERS (2015-11-12 08:26:59
+0800)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to ec26c1eef735befb7011c24e08e6310ab6dc9be6:

  arm: mx6: cm-fx6: add splash locations to cm-fx6 (2015-11-16 12:01:36
+0100)

----------------------------------------------------------------
Adrian Alonso (10):
      imx: cpu: move common chip revision id's
      imx: hab: rework secure boot support for imx6
      imx: hab: use unified rom section for mx6sx and mx6ul
      imx: hab: rework unified rom section for mx7
      imx: hab: add secure boot fuse details
      arm: imx: add secure boot fuse details for imx6 SoC
      arm: imx: add secure boot fuse details for imx7 SoC
      imx: hab: use read_fuse for secure boot settings
      imx: hab: add mx7 secure boot support
      mx7dsabresd: add secure boot support

Anthony Felice (1):
      vf610twr: Fix typo in DRAM init

Damien Riegel (1):
      ts4800: add CONFIG_OF_LIBFDT

Fabio Estevam (7):
      mx6sabresd: Remove empty reset_cpu()
      mx6slevk: Remove empty reset_cpu()
      mx6sxsabresd: Remove empty reset_cpu()
      mx6ul_14x14_evk: Remove empty reset_cpu()
      novena: Remove empty reset_cpu()
      ot1200: Remove empty reset_cpu()
      gw_ventana: Remove empty reset_cpu()

Heiko Schocher (3):
      arm, imx: add some gpr register defines
      arm, imx6, aristainetos2: set gpr register after reset
      imx35, flea3: add FIT image support

Marek Vasut (1):
      arm: novena: Fix kernel_addr_r env variable

Nikita Kiryanov (5):
      splash_source: rename *_read() to *_read_raw()
      splash_source: add support for filesystem formatted mmc
      splash_source: add support for filesystem formatted usb
      splash_source: add support for filesystem formatted sata
      arm: mx6: cm-fx6: add splash locations to cm-fx6

Peng Fan (22):
      imx-common: timer: clean up code
      driver: misc: add MXC_OCOTP Kconfig entry
      imx: mx6sabresd discard PHYS_SDRAM_SIZE
      imx: mx6sabresd: add i.MX6DQP Sabresd support
      arm: discard relocation entries for secure text
      mx7: psci: add basic psci support
      imx: mx7: default enable non-secure mode
      mxs: add parameter base_addr for mxs_set_lcdclk
      xfi3: correct function name
      mxs: regs-common.h must be wrapped with !__ASSEMBLY__
      imx: include linux/types.h for regs-common.h
      imx: imx-common: move lcdif structure and macro definition to
imx-common
      imx: lcdif: use one register structure for i.MXes
      imx: mx6: fix register address
      imx: mx6: crm_reg: add LCDIF related macros
      imx: mx6: add clock api for lcdif
      imx: mx6ul_14x14_evk: support lcdif display
      video: mxsfb: introduce lcdif_power_down
      imx: mx6: implement reset_misc
      imx: imx-common: power down lcdif before boot os
      imx: mx7: compile misc.c for mx7
      imx: mx7dsabresd: support lcdif

Stefano Babic (5):
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge git://git.denx.de/u-boot
      imx6: fix warnings due to switch to distro environment

Tzu-Jung Lee (1):
      mx7dsabresd: enable DFU support

Vagrant Cascadian (2):
      arm: imx: Switch Wandboard to use config_distro_bootcmd.h.
      arm: imx: Switch mx6cuboxi to use config_distro_bootcmd.h.

 arch/arm/cpu/arm926ejs/mx25/generic.c              |   1 +
 arch/arm/cpu/arm926ejs/mxs/clock.c                 |   2 +-
 arch/arm/cpu/armv7/mx6/Kconfig                     |   2 +
 arch/arm/cpu/armv7/mx6/Makefile                    |   1 -
 arch/arm/cpu/armv7/mx6/clock.c                     | 245
+++++++++++++++++++++
 arch/arm/cpu/armv7/mx6/soc.c                       |  15 ++
 arch/arm/cpu/armv7/mx7/Kconfig                     |   2 +
 arch/arm/cpu/armv7/mx7/Makefile                    |   4 +
 arch/arm/cpu/armv7/mx7/psci-mx7.c                  |  69 ++++++
 arch/arm/cpu/armv7/mx7/psci.S                      |  54 +++++
 arch/arm/cpu/armv7/mx7/soc.c                       |  17 ++
 arch/arm/cpu/u-boot.lds                            |  17 ++
 arch/arm/imx-common/Kconfig                        |   3 +
 arch/arm/imx-common/Makefile                       |   3 +-
 arch/arm/imx-common/cpu.c                          |   3 +
 arch/arm/{cpu/armv7/mx6 => imx-common}/hab.c       |  25 ++-
 arch/arm/imx-common/timer.c                        |  75 +------
 arch/arm/include/asm/arch-imx/cpu.h                |  12 +
 arch/arm/include/asm/arch-mx25/imx-regs.h          |   4 -
 arch/arm/include/asm/arch-mx5/imx-regs.h           |  11 -
 arch/arm/include/asm/arch-mx6/clock.h              |   2 +
 arch/arm/include/asm/arch-mx6/crm_regs.h           |  34 ++-
 arch/arm/include/asm/arch-mx6/imx-regs.h           |  57 ++++-
 arch/arm/include/asm/arch-mx7/imx-regs.h           |  99 +--------
 arch/arm/include/asm/arch-mxs/clock.h              |   2 +-
 arch/arm/include/asm/arch-mxs/imx-regs.h           |   2 +-
 .../arm/include/asm/{arch-mx6 => imx-common}/hab.h |  11 +-
 arch/arm/include/asm/imx-common/regs-common.h      |   2 +
 .../asm/{arch-mxs => imx-common}/regs-lcdif.h      |  30 ++-
 arch/arm/include/asm/imx-common/sys_proto.h        |   2 +
 board/aristainetos/aristainetos-v2.c               |  16 ++
 board/bachmann/ot1200/ot1200_spl.c                 |   4 -
 board/compulab/cm_fx6/cm_fx6.c                     |  19 ++
 board/compulab/cm_t35/cm_t35.c                     |   1 +
 board/creative/xfi3/xfi3.c                         |   2 +-
 board/freescale/mx6sabresd/mx6sabresd.c            |  73 +++++-
 board/freescale/mx6slevk/mx6slevk.c                |   4 -
 board/freescale/mx6sxsabresd/mx6sxsabresd.c        |   4 -
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c  |  67 +++++-
 board/freescale/mx7dsabresd/imximage.cfg           |   7 +
 board/freescale/mx7dsabresd/mx7dsabresd.c          |  64 ++++++
 board/gateworks/gw_ventana/gw_ventana_spl.c        |   4 -
 board/kosagi/novena/novena_spl.c                   |   4 -
 common/splash_source.c                             | 125 ++++++++++-
 doc/README.splashprepare                           |   5 +
 drivers/misc/Kconfig                               |   7 +
 drivers/video/mxsfb.c                              |  19 +-
 include/configs/flea3.h                            |   4 +
 include/configs/mx6cuboxi.h                        |  88 ++------
 include/configs/mx6sabre_common.h                  |   2 +
 include/configs/mx6sabresd.h                       |   1 -
 include/configs/mx6ul_14x14_evk.h                  |  18 ++
 include/configs/mx7_common.h                       |  12 +-
 include/configs/mx7dsabresd.h                      |  48 ++++
 include/configs/novena.h                           |   2 +-
 include/configs/ts4800.h                           |   2 +
 include/configs/wandboard.h                        |  82 ++-----
 include/splash.h                                   |  10 +
 58 files changed, 1105 insertions(+), 395 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/mx7/psci-mx7.c
 create mode 100644 arch/arm/cpu/armv7/mx7/psci.S
 rename arch/arm/{cpu/armv7/mx6 => imx-common}/hab.c (96%)
 rename arch/arm/include/asm/{arch-mx6 => imx-common}/hab.h (96%)
 rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-lcdif.h (92%)

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-10-15 12:49   ` Stefano Babic
@ 2015-10-15 13:04     ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-10-15 13:04 UTC (permalink / raw)
  To: u-boot

On Thu, Oct 15, 2015 at 02:49:29PM +0200, Stefano Babic wrote:
> Hi Tom,
> 
> On 15/10/2015 14:43, Tom Rini wrote:
> > On Thu, Oct 15, 2015 at 11:32:51AM +0200, Stefano Babic wrote:
> > 
> >> Hi Tom,
> >>
> >> I have a couple of last-minute fixes for the vfr610twr. Please pull them
> >> from u-boot-imx, thanks !
> >>
> >> The following changes since commit 61903b759aa336d798da49d884467219796817ff:
> >>
> >>   imximage: fix commands other than write_data (2015-10-07 13:43:15 +0200)
> >>
> >> are available in the git repository at:
> >>
> >>   git://www.denx.de/git/u-boot-imx.git master
> >>
> >> for you to fetch changes up to cf04ad3219260c3c39ec3dbfe2427e3463e8dbd5:
> >>
> >>   arm: vf610twr: improve memory layout (2015-10-15 11:22:07 +0200)
> >>
> > 
> > Applied to u-boot/master, thanks!
> > 
> 
> I have missed the following Fabio's patch fixing PCIe on mx6q:
> 
> http://patchwork.ozlabs.org/patch/529768/
> 
> Do you prefer I send to you another PR including it or do you pick it up
> yourself ?

I'll just grab it.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151015/0c4f0a05/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-10-15 12:43 ` Tom Rini
@ 2015-10-15 12:49   ` Stefano Babic
  2015-10-15 13:04     ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-10-15 12:49 UTC (permalink / raw)
  To: u-boot

Hi Tom,

On 15/10/2015 14:43, Tom Rini wrote:
> On Thu, Oct 15, 2015 at 11:32:51AM +0200, Stefano Babic wrote:
> 
>> Hi Tom,
>>
>> I have a couple of last-minute fixes for the vfr610twr. Please pull them
>> from u-boot-imx, thanks !
>>
>> The following changes since commit 61903b759aa336d798da49d884467219796817ff:
>>
>>   imximage: fix commands other than write_data (2015-10-07 13:43:15 +0200)
>>
>> are available in the git repository at:
>>
>>   git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to cf04ad3219260c3c39ec3dbfe2427e3463e8dbd5:
>>
>>   arm: vf610twr: improve memory layout (2015-10-15 11:22:07 +0200)
>>
> 
> Applied to u-boot/master, thanks!
> 

I have missed the following Fabio's patch fixing PCIe on mx6q:

http://patchwork.ozlabs.org/patch/529768/

Do you prefer I send to you another PR including it or do you pick it up
yourself ?

Regards,

Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-10-15  9:32 Stefano Babic
@ 2015-10-15 12:43 ` Tom Rini
  2015-10-15 12:49   ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2015-10-15 12:43 UTC (permalink / raw)
  To: u-boot

On Thu, Oct 15, 2015 at 11:32:51AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> I have a couple of last-minute fixes for the vfr610twr. Please pull them
> from u-boot-imx, thanks !
> 
> The following changes since commit 61903b759aa336d798da49d884467219796817ff:
> 
>   imximage: fix commands other than write_data (2015-10-07 13:43:15 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to cf04ad3219260c3c39ec3dbfe2427e3463e8dbd5:
> 
>   arm: vf610twr: improve memory layout (2015-10-15 11:22:07 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151015/0fb0dbf4/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-10-15  9:32 Stefano Babic
  2015-10-15 12:43 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-10-15  9:32 UTC (permalink / raw)
  To: u-boot

Hi Tom,

I have a couple of last-minute fixes for the vfr610twr. Please pull them
from u-boot-imx, thanks !

The following changes since commit 61903b759aa336d798da49d884467219796817ff:

  imximage: fix commands other than write_data (2015-10-07 13:43:15 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to cf04ad3219260c3c39ec3dbfe2427e3463e8dbd5:

  arm: vf610twr: improve memory layout (2015-10-15 11:22:07 +0200)

----------------------------------------------------------------
Fabio Estevam (1):
      colibri_vf: Fix bstlen field

Stefan Agner (2):
      mtd: nand: vf610_nfc: resync with upstream Linux version
      arm: vf610twr: improve memory layout

 board/toradex/colibri_vf/colibri_vf.c |   2 +-
 drivers/mtd/nand/vf610_nfc.c          | 247
+++++++++++++++++++---------------
 include/configs/vf610twr.h            |  27 +++-
 3 files changed, 160 insertions(+), 116 deletions(-)


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-10-13  8:16 Stefano Babic
@ 2015-10-13 12:39 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-10-13 12:39 UTC (permalink / raw)
  To: u-boot

On Tue, Oct 13, 2015 at 10:16:12AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 7daaac5281db0788cde895a0add38ad5195b5be1:
> 
>   mx6sabre_common: Add DFU support (2015-10-02 10:51:20 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 61903b759aa336d798da49d884467219796817ff:
> 
>   imximage: fix commands other than write_data (2015-10-07 13:43:15 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151013/ab3ac7a2/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-10-13  8:16 Stefano Babic
  2015-10-13 12:39 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-10-13  8:16 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 7daaac5281db0788cde895a0add38ad5195b5be1:

  mx6sabre_common: Add DFU support (2015-10-02 10:51:20 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 61903b759aa336d798da49d884467219796817ff:

  imximage: fix commands other than write_data (2015-10-07 13:43:15 +0200)

----------------------------------------------------------------
Troy Kisky (2):
      imximage: header.length of 4 is valid
      imximage: fix commands other than write_data

 tools/imximage.c | 81
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------
 tools/imximage.h |  8 ++++++--
 2 files changed, 64 insertions(+), 25 deletions(-)

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-10-02  9:11 Stefano Babic
@ 2015-10-03  0:35 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-10-03  0:35 UTC (permalink / raw)
  To: u-boot

On Fri, Oct 02, 2015 at 11:11:40AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 1f8836396de8215b7f460616926052b32597bb29:
> 
>   Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 7daaac5281db0788cde895a0add38ad5195b5be1:
> 
>   mx6sabre_common: Add DFU support (2015-10-02 10:51:20 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151002/89ad3abe/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-10-02  9:11 Stefano Babic
  2015-10-03  0:35 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-10-02  9:11 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 1f8836396de8215b7f460616926052b32597bb29:

  Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 7daaac5281db0788cde895a0add38ad5195b5be1:

  mx6sabre_common: Add DFU support (2015-10-02 10:51:20 +0200)

----------------------------------------------------------------
Albert ARIBAUD \(3ADEV\) (1):
      vf610: add support for Phytec PCM052

Albert ARIBAUD \\(3ADEV\\) (2):
      vf610: refactor DDRMC code
      I2C: mxc_i2c: make I2C1 and I2C2 optional

Fabio Estevam (1):
      mx6sabre_common: Add DFU support

Peng Fan (1):
      imx: mx6: correct enable_fec_anatop_clock

Soeren Moch (1):
      tbs2910: explicitly set boot address

 README                                        |   8 +-
 arch/arm/Kconfig                              |   5 +
 arch/arm/cpu/armv7/mx6/clock.c                |   2 +
 arch/arm/imx-common/ddrmc-vf610.c             | 193
+++++++++++++------------------
 arch/arm/include/asm/arch-vf610/ddrmc-vf610.h |  40 ++++---
 arch/arm/include/asm/arch-vf610/imx-regs.h    |   6 +-
 board/freescale/vf610twr/vf610twr.c           | 156
++++++++++++++++---------
 board/phytec/pcm052/Kconfig                   |  15 +++
 board/phytec/pcm052/MAINTAINERS               |   6 +
 board/phytec/pcm052/Makefile                  |   7 ++
 board/phytec/pcm052/imximage.cfg              |  17 +++
 board/phytec/pcm052/pcm052.c                  | 515
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/toradex/colibri_vf/colibri_vf.c         | 144 ++++++++++++++++-------
 configs/pcm052_defconfig                      |   6 +
 drivers/i2c/mxc_i2c.c                         |   6 +
 include/configs/apf27.h                       |   2 +
 include/configs/aristainetos-common.h         |   2 +
 include/configs/cgtqmx6eval.h                 |   2 +
 include/configs/cm_fx6.h                      |   2 +
 include/configs/embestmx6boards.h             |   2 +
 include/configs/flea3.h                       |   2 +
 include/configs/gw_ventana.h                  |   2 +
 include/configs/imx31_phycore.h               |   2 +
 include/configs/ls1021aqds.h                  |   2 +
 include/configs/ls1021atwr.h                  |   2 +
 include/configs/ls2085a_common.h              |   2 +
 include/configs/m53evk.h                      |   2 +
 include/configs/mx25pdk.h                     |   2 +
 include/configs/mx35pdk.h                     |   2 +
 include/configs/mx53ard.h                     |   2 +
 include/configs/mx53evk.h                     |   2 +
 include/configs/mx53loco.h                    |   2 +
 include/configs/mx53smd.h                     |   2 +
 include/configs/mx6qsabreauto.h               |   2 +
 include/configs/mx6sabre_common.h             |  10 ++
 include/configs/mx6sabresd.h                  |   2 +
 include/configs/mx6slevk.h                    |   2 +
 include/configs/mx6sxsabresd.h                |   2 +
 include/configs/mx6ul_14x14_evk.h             |   2 +
 include/configs/mx7dsabresd.h                 |   2 +-
 include/configs/nitrogen6x.h                  |   2 +
 include/configs/novena.h                      |   2 +
 include/configs/ot1200.h                      |   2 +
 include/configs/pcm052.h                      | 231
+++++++++++++++++++++++++++++++++++++
 include/configs/platinum.h                    |   2 +
 include/configs/tbs2910.h                     |   4 +-
 include/configs/titanium.h                    |   2 +
 include/configs/tqma6.h                       |   2 +
 include/configs/usbarmory.h                   |   2 +
 include/configs/vf610twr.h                    |   2 +
 include/configs/wandboard.h                   |   2 +
 include/configs/warp.h                        |   2 +
 include/configs/woodburn_common.h             |   2 +
 53 files changed, 1212 insertions(+), 229 deletions(-)
 create mode 100644 board/phytec/pcm052/Kconfig
 create mode 100644 board/phytec/pcm052/MAINTAINERS
 create mode 100644 board/phytec/pcm052/Makefile
 create mode 100644 board/phytec/pcm052/imximage.cfg
 create mode 100644 board/phytec/pcm052/pcm052.c
 create mode 100644 configs/pcm052_defconfig
 create mode 100644 include/configs/pcm052.h


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-09-24  9:45 Stefano Babic
@ 2015-09-24 21:10 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-09-24 21:10 UTC (permalink / raw)
  To: u-boot

On Thu, Sep 24, 2015 at 11:45:59AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to f697c2acca9ff02c9b0cf480a4a726ed9626a53a:
> 
>   imx: fix coding style (2015-09-24 11:32:38 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150924/a273a0b1/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-09-24  9:45 Stefano Babic
  2015-09-24 21:10 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-09-24  9:45 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to f697c2acca9ff02c9b0cf480a4a726ed9626a53a:

  imx: fix coding style (2015-09-24 11:32:38 +0200)

----------------------------------------------------------------
Fabio Estevam (9):
      mx6sabre_common: Add Fastboot support
      mx7dsabresd: Staticize when possible
      mx7dsabreasd: Remove dead code
      mx7dsabresd: Include USB header
      mx7dsabresd: Remove get_board_rev()
      mx7dsabresd: Remove unused config option
      mx6ul_14x14_evk: Remove dead code
      mx6ul_14x14_evk: Staticize when possible
      mx6ul_14x14_evk: Remove get_board_rev()

Heiko Schocher (1):
      imx6, aristaintetos2: add me as maintainer

Otavio Salvador (3):
      cgtqmx6eval: Fit into a single line
      cgtqmx6eval: Add a maintainer entry
      cgtqmx6eval: Add USB Mass Storage support

Peng Fan (12):
      imx-common: fix iomux settings
      imx: wdog: correct wcr register settings
      imx: mx7dsabresd set wdog SRS bit
      imx: mx7: drop select CPU_V7 for board target
      imx: mx7dsabresd: drop SYS_SOC from board Kconfig
      mtd: nand: mxs check maximum ecc that platfrom supports
      imx-common: consider mux_ctrl_ofs when setting mux_mode
      imx: boards: Add maintainers info
      imx: mx7: discard unused global variable
      imx-common: wrap boot_mode_apply with CONFIG_CMD_BMODE
      imx: mx7dsabresd: drop code for CONFIG_CMD_BMODE
      imx: fix coding style

 arch/arm/cpu/armv7/mx7/Kconfig                    |  1 -
 arch/arm/cpu/armv7/mx7/soc.c                      |  4 +---
 arch/arm/imx-common/init.c                        |  5 +++--
 arch/arm/imx-common/iomux-v3.c                    |  6 ++----
 board/aristainetos/MAINTAINERS                    |  1 +
 board/congatec/cgtqmx6eval/MAINTAINERS            |  4 ++--
 board/congatec/cgtqmx6eval/cgtqmx6eval.c          |  3 +--
 board/freescale/mx6qsabreauto/MAINTAINERS         |  2 ++
 board/freescale/mx6slevk/MAINTAINERS              |  2 ++
 board/freescale/mx6ul_14x14_evk/MAINTAINERS       |  1 +
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 52
++--------------------------------------------------
 board/freescale/mx7dsabresd/Kconfig               |  3 ---
 board/freescale/mx7dsabresd/mx7dsabresd.c         | 74
+++++++++++++-------------------------------------------------------------
 drivers/mtd/nand/mxs_nand.c                       |  9 ++++++++-
 drivers/watchdog/imx_watchdog.c                   |  3 ++-
 include/configs/cgtqmx6eval.h                     | 14 ++++++++++++++
 include/configs/mx6sabre_common.h                 |  6 ++++++
 include/configs/mx7dsabresd.h                     |  3 ---
 18 files changed, 60 insertions(+), 133 deletions(-)


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-09-13  9:22 Stefano Babic
@ 2015-09-13 13:56 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-09-13 13:56 UTC (permalink / raw)
  To: u-boot

On Sun, Sep 13, 2015 at 11:22:15AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 922f735ecf0de23eb0e01c208f5b422f39f6aed9:
> 
>   Merge git://git.denx.de/u-boot-usb (2015-09-12 15:50:02 -0400)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 84c311f28e39d7b5b13069ae29a55bdf6c7c0890:
> 
>   udoo: Fix the error handling in board_eth_init() (2015-09-13 11:06:08
> +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150913/affd300d/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-09-13  9:22 Stefano Babic
  2015-09-13 13:56 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-09-13  9:22 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 922f735ecf0de23eb0e01c208f5b422f39f6aed9:

  Merge git://git.denx.de/u-boot-usb (2015-09-12 15:50:02 -0400)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 84c311f28e39d7b5b13069ae29a55bdf6c7c0890:

  udoo: Fix the error handling in board_eth_init() (2015-09-13 11:06:08
+0200)

----------------------------------------------------------------
Adrian Alonso (13):
      imx: arch-mx6: add is_soc_type helper macro
      thermal: imx_thermal: rework driver to be reused
      arm: imx: common rework cache settings for imx6
      arm: imx: imx-common: init: move arch init common setup
      imx: system counter driver for imx7d and mx6ul
      imx: imx7d: initial arch level support
      imx: imx7d: clock control module support
      imx: imx7d: Add SoC system support
      arm: imx-common: init: extend init_aips to support imx7
      arm: imx-common: init: rework wdog settings for imx6/imx7
      thermal: imx: add imx7d soc thermal support
      imx: imx7d: add imx-common cpu support for imx7d
      imx: mx7dsabresd: Add support for MX7D SABRESD board

Fabio Estevam (17):
      thermal: imx_thermal: Do not print on error
      imx-common: cpu: Do not print on invalid temperature
      mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORT
      mx6ul_14x14_evk: Add a README file
      mx6slevk: Remove CONFIG_SPL_FAT_SUPPORT
      mx6sxsabresd: Remove CONFIG_SPL_FAT_SUPPORT
      cgtqmx6eval: Remove CONFIG_CMD_FUSE option
      mx6ul_14x14_evk: Remove CONFIG_SYS_GENERIC_BOARD
      mx6ul_14x14_evk: Remove unused config option
      mx6ul_14x14_evk: Do not undef config options
      mx6ul_14x14_evk: Remove CONFIG_FEC_DMA_MINALIGN
      mx6ul_14x14_evk: Use the default CONFIG_SYS_PBSIZE
      pcie_imx: Use 'ms' for milliseconds
      nitrogen6x: Fix the error handling in board_eth_init()
      ot1200: Fix the error handling in board_eth_init()
      tqma6_mba6: Fix the error handling in board_eth_init()
      udoo: Fix the error handling in board_eth_init()

Michael Heimpold (1):
      mxs: mxsboot: fix endianess for sd boot images

Nikita Kiryanov (4):
      compulab: eeprom: select i2c bus when querying for board rev
      compulab: eeprom: propagate error value in read_mac_addr()
      compulab: eeprom: add support for obtaining product name
      arm: mx6: cm-fx6: modify device tree for old revisions of utilite

Peng Fan (5):
      Revert "imx: mx6: ddr correct tRFC and tXS"
      imx: discard duplicated MXC_OCOTP and CMD_FUSE
      imx: mx6ul: support mx6ul 9x9 evk board
      mx6: remove SYS_SOC from board Kconfig
      imx: mx6 discard 'select CPU_V7' for different targets

 arch/arm/Kconfig                                  |    6 +
 arch/arm/Makefile                                 |    4 +-
 arch/arm/cpu/armv7/Makefile                       |    3 +-
 arch/arm/cpu/armv7/mx6/Kconfig                    |   30 +-
 arch/arm/cpu/armv7/mx6/ddr.c                      |    4 +-
 arch/arm/cpu/armv7/mx6/soc.c                      |  198 +----
 arch/arm/cpu/armv7/mx7/Kconfig                    |   27 +
 arch/arm/cpu/armv7/mx7/Makefile                   |    8 +
 arch/arm/cpu/armv7/mx7/clock.c                    | 1127
+++++++++++++++++++++++++
 arch/arm/cpu/armv7/mx7/clock_slice.c              |  757 +++++++++++++++++
 arch/arm/cpu/armv7/mx7/soc.c                      |  269 ++++++
 arch/arm/imx-common/Makefile                      |   10 +-
 arch/arm/imx-common/cache.c                       |  103 +++
 arch/arm/imx-common/cpu.c                         |   33 +-
 arch/arm/imx-common/init.c                        |  117 +++
 arch/arm/imx-common/syscounter.c                  |  126 +++
 arch/arm/include/asm/arch-imx/cpu.h               |    4 +
 arch/arm/include/asm/arch-mx6/imx-regs.h          |    4 +
 arch/arm/include/asm/arch-mx7/clock.h             |  348 ++++++++
 arch/arm/include/asm/arch-mx7/clock_slice.h       |  116 +++
 arch/arm/include/asm/arch-mx7/crm_regs.h          | 2813
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7/imx-regs.h          | 1307
+++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx7/sys_proto.h         |    9 +
 arch/arm/include/asm/imx-common/boot_mode.h       |   21 +
 arch/arm/include/asm/imx-common/sys_proto.h       |    7 +
 arch/arm/include/asm/imx-common/syscounter.h      |   29 +
 board/aristainetos/Kconfig                        |    9 -
 board/bachmann/ot1200/Kconfig                     |    3 -
 board/bachmann/ot1200/ot1200.c                    |   20 +-
 board/barco/platinum/Kconfig                      |    6 -
 board/barco/titanium/Kconfig                      |    3 -
 board/boundary/nitrogen6x/Kconfig                 |    3 -
 board/boundary/nitrogen6x/nitrogen6x.c            |   19 +-
 board/compulab/cm_fx6/Kconfig                     |    3 -
 board/compulab/cm_fx6/cm_fx6.c                    |   22 +-
 board/compulab/cm_t35/cm_t35.c                    |    2 +-
 board/compulab/common/eeprom.c                    |   40 +-
 board/compulab/common/eeprom.h                    |   10 +-
 board/congatec/cgtqmx6eval/Kconfig                |    3 -
 board/embest/mx6boards/Kconfig                    |    3 -
 board/freescale/mx6qarm2/Kconfig                  |    3 -
 board/freescale/mx6qsabreauto/Kconfig             |    3 -
 board/freescale/mx6sabresd/Kconfig                |    3 -
 board/freescale/mx6slevk/Kconfig                  |    3 -
 board/freescale/mx6sxsabresd/Kconfig              |    3 -
 board/freescale/mx6ul_14x14_evk/Kconfig           |    5 +-
 board/freescale/mx6ul_14x14_evk/README            |   32 +
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c |  183 +++-
 board/freescale/mx7dsabresd/Kconfig               |   15 +
 board/freescale/mx7dsabresd/MAINTAINERS           |    6 +
 board/freescale/mx7dsabresd/Makefile              |    6 +
 board/freescale/mx7dsabresd/imximage.cfg          |   94 +++
 board/freescale/mx7dsabresd/mx7dsabresd.c         |  555 +++++++++++++
 board/gateworks/gw_ventana/Kconfig                |    3 -
 board/kosagi/novena/Kconfig                       |    3 -
 board/solidrun/mx6cuboxi/Kconfig                  |    3 -
 board/tqc/tqma6/Kconfig                           |    3 -
 board/tqc/tqma6/tqma6_mba6.c                      |   20 +-
 board/udoo/Kconfig                                |    3 -
 board/udoo/udoo.c                                 |   19 +-
 board/wandboard/Kconfig                           |    3 -
 board/warp/Kconfig                                |    3 -
 configs/mx6ul_9x9_evk_defconfig                   |    8 +
 configs/mx7dsabresd_defconfig                     |   14 +
 drivers/pci/pcie_imx.c                            |    6 +-
 drivers/thermal/Makefile                          |    2 +-
 drivers/thermal/imx_thermal.c                     |   90 +-
 drivers/watchdog/Makefile                         |    2 +-
 include/configs/cgtqmx6eval.h                     |    7 +-
 include/configs/embestmx6boards.h                 |    2 +-
 include/configs/gw_ventana.h                      |    2 +-
 include/configs/mx6cuboxi.h                       |    2 +-
 include/configs/mx6sabre_common.h                 |    2 +-
 include/configs/mx6slevk.h                        |    3 +-
 include/configs/mx6sxsabresd.h                    |    3 +-
 include/configs/mx6ul_14x14_evk.h                 |   49 +-
 include/configs/mx7_common.h                      |   95 +++
 include/configs/mx7dsabresd.h                     |  194 +++++
 include/configs/tbs2910.h                         |    2 +-
 tools/mxsboot.c                                   |   19 +-
 80 files changed, 8659 insertions(+), 440 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/mx7/Kconfig
 create mode 100644 arch/arm/cpu/armv7/mx7/Makefile
 create mode 100644 arch/arm/cpu/armv7/mx7/clock.c
 create mode 100644 arch/arm/cpu/armv7/mx7/clock_slice.c
 create mode 100644 arch/arm/cpu/armv7/mx7/soc.c
 create mode 100644 arch/arm/imx-common/cache.c
 create mode 100644 arch/arm/imx-common/init.c
 create mode 100644 arch/arm/imx-common/syscounter.c
 create mode 100644 arch/arm/include/asm/arch-mx7/clock.h
 create mode 100644 arch/arm/include/asm/arch-mx7/clock_slice.h
 create mode 100644 arch/arm/include/asm/arch-mx7/crm_regs.h
 create mode 100644 arch/arm/include/asm/arch-mx7/imx-regs.h
 create mode 100644 arch/arm/include/asm/arch-mx7/sys_proto.h
 create mode 100644 arch/arm/include/asm/imx-common/syscounter.h
 create mode 100644 board/freescale/mx6ul_14x14_evk/README
 create mode 100644 board/freescale/mx7dsabresd/Kconfig
 create mode 100644 board/freescale/mx7dsabresd/MAINTAINERS
 create mode 100644 board/freescale/mx7dsabresd/Makefile
 create mode 100644 board/freescale/mx7dsabresd/imximage.cfg
 create mode 100644 board/freescale/mx7dsabresd/mx7dsabresd.c
 create mode 100644 configs/mx6ul_9x9_evk_defconfig
 create mode 100644 configs/mx7dsabresd_defconfig
 create mode 100644 include/configs/mx7_common.h
 create mode 100644 include/configs/mx7dsabresd.h



-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-09-02 14:12     ` Stefano Babic
@ 2015-09-02 21:58       ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-09-02 21:58 UTC (permalink / raw)
  To: u-boot

On Wed, Sep 02, 2015 at 04:12:18PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> On 02/09/2015 15:45, Stefano Babic wrote:
> > Hi Tom,
> > 
> > On 02/09/2015 15:18, Tom Rini wrote:
> >> On Wed, Sep 02, 2015 at 11:57:13AM +0200, Stefano Babic wrote:
> >>
> >>> Hi Tom,
> >>>
> >>> please pull from u-boot-imx, thanks !
> >>>
> >>> The following changes since commit e3d50d4292ebabdf61f56f3a633cdb3a1e58bf88:
> >>>
> >>>   fsl_esdhc.c: Always make check_and_invalidate_dcache_range available
> >>> (2015-08-02 10:27:52 -0400)
> >>
> >> That's actually really old and I get a few non-trivial conflicts.  Can
> >> you please rebase on master?  Thanks!
> > 
> > You're right - I am solving conflicts and I will send a new PR afterward.
> > 
> 
> Conflicts are solved - I had to rebase, sorry for that!
> 
> Can you try again to take my PR ?

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150902/762dd457/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-09-02 13:45   ` Stefano Babic
@ 2015-09-02 14:12     ` Stefano Babic
  2015-09-02 21:58       ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-09-02 14:12 UTC (permalink / raw)
  To: u-boot

Hi Tom,

On 02/09/2015 15:45, Stefano Babic wrote:
> Hi Tom,
> 
> On 02/09/2015 15:18, Tom Rini wrote:
>> On Wed, Sep 02, 2015 at 11:57:13AM +0200, Stefano Babic wrote:
>>
>>> Hi Tom,
>>>
>>> please pull from u-boot-imx, thanks !
>>>
>>> The following changes since commit e3d50d4292ebabdf61f56f3a633cdb3a1e58bf88:
>>>
>>>   fsl_esdhc.c: Always make check_and_invalidate_dcache_range available
>>> (2015-08-02 10:27:52 -0400)
>>
>> That's actually really old and I get a few non-trivial conflicts.  Can
>> you please rebase on master?  Thanks!
> 
> You're right - I am solving conflicts and I will send a new PR afterward.
> 

Conflicts are solved - I had to rebase, sorry for that!

Can you try again to take my PR ?

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-09-02 13:18 ` Tom Rini
@ 2015-09-02 13:45   ` Stefano Babic
  2015-09-02 14:12     ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-09-02 13:45 UTC (permalink / raw)
  To: u-boot

Hi Tom,

On 02/09/2015 15:18, Tom Rini wrote:
> On Wed, Sep 02, 2015 at 11:57:13AM +0200, Stefano Babic wrote:
> 
>> Hi Tom,
>>
>> please pull from u-boot-imx, thanks !
>>
>> The following changes since commit e3d50d4292ebabdf61f56f3a633cdb3a1e58bf88:
>>
>>   fsl_esdhc.c: Always make check_and_invalidate_dcache_range available
>> (2015-08-02 10:27:52 -0400)
> 
> That's actually really old and I get a few non-trivial conflicts.  Can
> you please rebase on master?  Thanks!

You're right - I am solving conflicts and I will send a new PR afterward.

Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-09-02  9:57 Stefano Babic
@ 2015-09-02 13:18 ` Tom Rini
  2015-09-02 13:45   ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2015-09-02 13:18 UTC (permalink / raw)
  To: u-boot

On Wed, Sep 02, 2015 at 11:57:13AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit e3d50d4292ebabdf61f56f3a633cdb3a1e58bf88:
> 
>   fsl_esdhc.c: Always make check_and_invalidate_dcache_range available
> (2015-08-02 10:27:52 -0400)

That's actually really old and I get a few non-trivial conflicts.  Can
you please rebase on master?  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150902/4ace3fb8/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-09-02  9:57 Stefano Babic
  2015-09-02 13:18 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-09-02  9:57 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit e3d50d4292ebabdf61f56f3a633cdb3a1e58bf88:

  fsl_esdhc.c: Always make check_and_invalidate_dcache_range available
(2015-08-02 10:27:52 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 3761c42da1763118e4fbf3d09f5120cec6bd3ad0:

  imx: vf610 add get_cpu_rev (2015-09-02 10:24:10 +0200)

----------------------------------------------------------------
Adrian Alonso (4):
      power: pmic: add pfuze3000 support
      imx: iomux-v3: add imx7d support for iomuxc
      imx: mxc_gpio: add support for imx7d SoC
      imx: ocotp: mxc add i.MX7D support

Baruch Siach (1):
      tools/imximage: set DCD pointer to NULL when its length is 0

Chris Smith (1):
      mxs_ocotp: Shift the HBUS divider correctly

Damien Riegel (1):
      ARM: ts4800: add ethernet support

Eric Nelson (1):
      nitrogen6x: change maintainer

Heiko Schocher (3):
      arm, imx6: aristainetos board updates
      video, lg4573: make spi bus and cs configurable
      arm, imx6: add aristainetos 2b board version

J?rg Krause (1):
      tools: mxsboot: calculate ECC block level dynamically

Lucile Quirion (1):
      ARM: ts4800: add basic board support

Marek Vasut (1):
      arm: mxs: Fix mkimage invocation

Nikita Kiryanov (3):
      arm: mx6: cm-fx6: force host mode on usb controller
      arm: mx6: cm-fx6: print PCB revision
      arm: mx6: cm-fx6: switch to usb kbd polling via int queue

Olaf Mandel (1):
      imx: fec: add MAC reading from eFuses to README

Otavio Salvador (1):
      cgtqmx6eval: Add Ethernet support

Peng Fan (25):
      imx: mx6ul_14x14_evk discard redefined CONFIG_MX6
      imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file
      imx: add cpu type for i.MX2 and i.MX3
      imx: mx27 implement get_cpu_rev
      imx: mx31 use new formula for get_cpu_rev
      imx: mxs: reimplement get_cpu_rev
      imx-common: consolidate macros and prototypes into sys_proto.h
      imx: clock support enet2 anatop clock support
      net: fec: do not access reserved register for i.MX6UL
      imx: mx6ul_14x14_evk add ENET support
      imx: mx6sxsabresd: enable CONFIG_SPL_FAT_SUPPORT
      imx: mx6: ddr add more register entry for mmdc_p_regs
      imx: mx6: ddr no support MMDC1 for i.MX6SL
      imx: mx6: ddr correct tRFC and tXS
      imx: mx6: ddr add dram io configuration and header file for i.MX6SL
      imx: mx6: ddr add mpzqlp2ctl entry
      imx: mx6: ddr add an entry ddr_type for mx6_ddr_sysinfo
      imx: mx6: ddr init MMDC according to ddr_type
      imx: mx6: ddr: add LPDDR2 support
      imx: mx6slevk: add SPL support
      arm: Add SYS_L2CACHE_OFF Kconfig entry
      imx: mx6ul_14x14_evk select MX6UL
      imx: mx6ul_14x14_evk discard MX6UL from CONFIG_SYS_EXTRA_OPTIONS
      mxc: ocotp fix hole in shadow registers
      imx: vf610 add get_cpu_rev

Soeren Moch (3):
      tbs2910: use full name in Kconfig board selection
      tbs2910: remove deprecated CONFIG_SYS_EXTRA_OPTIONS
      tbs2910: remove SYS_SOC from board specific Kconfig

Stefan Roese (1):
      arm: mx6: Remove SPI support from WRU-IV baseboard

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot

vpeter4 (2):
      udoo: Switch to SPL support
      udoo: Remove SPL fat support

 arch/arm/Kconfig                                  |  138 +--
 arch/arm/cpu/arm1136/mx31/generic.c               |    2 +-
 arch/arm/cpu/arm926ejs/mx27/generic.c             |    6 +
 arch/arm/cpu/arm926ejs/mxs/Makefile               |   10 +-
 arch/arm/cpu/arm926ejs/mxs/mxs.c                  |   52 +-
 arch/arm/cpu/armv7/mx6/Kconfig                    |  138 ++-
 arch/arm/cpu/armv7/mx6/clock.c                    |   23 +-
 arch/arm/cpu/armv7/mx6/ddr.c                      |  379 +++++-
 arch/arm/cpu/armv7/vf610/generic.c                |    6 +
 arch/arm/imx-common/iomux-v3.c                    |   18 +
 arch/arm/include/asm/arch-imx/cpu.h               |    7 +
 arch/arm/include/asm/arch-mx31/sys_proto.h        |    7 +-
 arch/arm/include/asm/arch-mx35/sys_proto.h        |   12 +-
 arch/arm/include/asm/arch-mx5/iomux-mx51.h        |   11 +
 arch/arm/include/asm/arch-mx5/sys_proto.h         |   22 +-
 arch/arm/include/asm/arch-mx6/clock.h             |    2 +-
 arch/arm/include/asm/arch-mx6/crm_regs.h          |    6 +
 arch/arm/include/asm/arch-mx6/imx-regs.h          |    3 +-
 arch/arm/include/asm/arch-mx6/mx6-ddr.h           |  140 ++-
 arch/arm/include/asm/arch-mx6/mx6sl-ddr.h         |   45 +
 arch/arm/include/asm/arch-mx6/sys_proto.h         |   45 +-
 arch/arm/include/asm/arch-mx7/gpio.h              |   12 +
 arch/arm/include/asm/arch-mx7/mx7-pins.h          |   19 +
 arch/arm/include/asm/arch-mx7/mx7d_pins.h         | 1308
+++++++++++++++++++++
 arch/arm/include/asm/arch-mxs/sys_proto.h         |   14 +-
 arch/arm/include/asm/imx-common/iomux-v3.h        |   32 +
 arch/arm/include/asm/imx-common/sys_proto.h       |   46 +
 board/aristainetos/Kconfig                        |   13 +
 board/aristainetos/aristainetos-v1.c              |    2 +-
 board/aristainetos/aristainetos-v2.c              |   57 +-
 board/aristainetos/aristainetos.c                 |   19 +-
 board/barco/platinum/platinum_picon.c             |    2 +-
 board/barco/platinum/spl_picon.c                  |    1 +
 board/barco/platinum/spl_titanium.c               |    1 +
 board/boundary/nitrogen6x/MAINTAINERS             |    2 +-
 board/compulab/cm_fx6/cm_fx6.c                    |   13 +
 board/congatec/cgtqmx6eval/cgtqmx6eval.c          |  207 ++++
 board/freescale/mx6qsabreauto/mx6qsabreauto.c     |    2 +-
 board/freescale/mx6sabresd/mx6sabresd.c           |    1 +
 board/freescale/mx6slevk/mx6slevk.c               |  166 ++-
 board/freescale/mx6sxsabresd/mx6sxsabresd.c       |    3 +-
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c |  111 ++
 board/gateworks/gw_ventana/gw_ventana_spl.c       |    1 +
 board/solidrun/mx6cuboxi/mx6cuboxi.c              |    3 +-
 board/tbs/tbs2910/Kconfig                         |    9 +-
 board/technologic/ts4800/Kconfig                  |   15 +
 board/technologic/ts4800/MAINTAINERS              |    6 +
 board/technologic/ts4800/Makefile                 |    7 +
 board/technologic/ts4800/ts4800.c                 |  257 ++++
 board/technologic/ts4800/ts4800.h                 |   16 +
 board/tqc/tqma6/tqma6.c                           |    1 +
 board/udoo/1066mhz_4x256mx16.cfg                  |   55 -
 board/udoo/MAINTAINERS                            |    2 +-
 board/udoo/Makefile                               |    2 +-
 board/udoo/clocks.cfg                             |   32 -
 board/udoo/ddr-setup.cfg                          |   87 --
 board/udoo/udoo.c                                 |   95 +-
 board/udoo/udoo.cfg                               |   29 -
 board/udoo/udoo_spl.c                             |  271 +++++
 configs/aristainetos2_defconfig                   |    1 +
 configs/aristainetos2b_defconfig                  |    7 +
 configs/aristainetos_defconfig                    |    1 +
 configs/cgtqmx6qeval_defconfig                    |    1 +
 configs/cm_fx6_defconfig                          |    2 +-
 configs/gwventana_defconfig                       |    1 +
 configs/marsboard_defconfig                       |    1 +
 configs/mx6cuboxi_defconfig                       |    1 +
 configs/mx6dlarm2_defconfig                       |    1 +
 configs/mx6dlarm2_lpddr2_defconfig                |    1 +
 configs/mx6dlsabreauto_defconfig                  |    1 +
 configs/mx6dlsabresd_defconfig                    |    1 +
 configs/mx6qarm2_defconfig                        |    1 +
 configs/mx6qarm2_lpddr2_defconfig                 |    1 +
 configs/mx6qpsabreauto_defconfig                  |    1 +
 configs/mx6qsabreauto_defconfig                   |    1 +
 configs/mx6qsabrelite_defconfig                   |    1 +
 configs/mx6qsabresd_defconfig                     |    1 +
 configs/mx6sabresd_spl_defconfig                  |    1 +
 configs/mx6slevk_defconfig                        |    1 +
 configs/mx6slevk_spinor_defconfig                 |    1 +
 configs/mx6slevk_spl_defconfig                    |    8 +
 configs/mx6sxsabresd_defconfig                    |    1 +
 configs/mx6sxsabresd_spl_defconfig                |    1 +
 configs/mx6ul_14x14_evk_defconfig                 |    6 +-
 configs/nitrogen6dl2g_defconfig                   |    1 +
 configs/nitrogen6dl_defconfig                     |    1 +
 configs/nitrogen6q2g_defconfig                    |    1 +
 configs/nitrogen6q_defconfig                      |    1 +
 configs/nitrogen6s1g_defconfig                    |    1 +
 configs/nitrogen6s_defconfig                      |    1 +
 configs/novena_defconfig                          |    1 +
 configs/ot1200_defconfig                          |    1 +
 configs/ot1200_spl_defconfig                      |    1 +
 configs/platinum_picon_defconfig                  |    1 +
 configs/platinum_titanium_defconfig               |    1 +
 configs/riotboard_defconfig                       |    1 +
 configs/tbs2910_defconfig                         |    2 +-
 configs/tqma6s_wru4_mmc_defconfig                 |    3 -
 configs/ts4800_defconfig                          |    4 +
 configs/udoo_defconfig                            |    7 +
 configs/udoo_quad_defconfig                       |    5 -
 configs/wandboard_defconfig                       |    1 +
 configs/warp_defconfig                            |    1 +
 doc/README.fec_mxc                                |    9 +-
 doc/README.imx5                                   |   12 +
 drivers/gpio/mxc_gpio.c                           |    8 +-
 drivers/misc/mxc_ocotp.c                          |  152 ++-
 drivers/misc/mxs_ocotp.c                          |    1 +
 drivers/net/fec_mxc.c                             |   14 +-
 drivers/power/pmic/Makefile                       |    1 +
 drivers/power/pmic/pmic_pfuze3000.c               |   32 +
 drivers/video/lg4573.c                            |    3 +-
 include/configs/aristainetos-common.h             |    4 -
 include/configs/aristainetos.h                    |    6 +-
 include/configs/aristainetos2.h                   |    8 +-
 include/configs/aristainetos2b.h                  |   62 +
 include/configs/cgtqmx6eval.h                     |   13 +
 include/configs/cm_fx6.h                          |    1 +
 include/configs/imx6_spl.h                        |    2 +-
 include/configs/mx6slevk.h                        |    7 +
 include/configs/mx6sxsabresd.h                    |    1 +
 include/configs/mx6ul_14x14_evk.h                 |   22 +-
 include/configs/tqma6_wru4.h                      |    8 +
 include/configs/ts4800.h                          |  185 +++
 include/configs/udoo.h                            |   19 +-
 include/micrel.h                                  |    4 +
 include/power/pfuze3000_pmic.h                    |   78 ++
 tools/imximage.c                                  |    6 +-
 tools/mxsboot.c                                   |   21 +-
 129 files changed, 4145 insertions(+), 604 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6sl-ddr.h
 create mode 100644 arch/arm/include/asm/arch-mx7/gpio.h
 create mode 100644 arch/arm/include/asm/arch-mx7/mx7-pins.h
 create mode 100644 arch/arm/include/asm/arch-mx7/mx7d_pins.h
 create mode 100644 arch/arm/include/asm/imx-common/sys_proto.h
 create mode 100644 board/technologic/ts4800/Kconfig
 create mode 100644 board/technologic/ts4800/MAINTAINERS
 create mode 100644 board/technologic/ts4800/Makefile
 create mode 100644 board/technologic/ts4800/ts4800.c
 create mode 100644 board/technologic/ts4800/ts4800.h
 delete mode 100644 board/udoo/1066mhz_4x256mx16.cfg
 delete mode 100644 board/udoo/clocks.cfg
 delete mode 100644 board/udoo/ddr-setup.cfg
 delete mode 100644 board/udoo/udoo.cfg
 create mode 100644 board/udoo/udoo_spl.c
 create mode 100644 configs/aristainetos2b_defconfig
 create mode 100644 configs/mx6slevk_spl_defconfig
 create mode 100644 configs/ts4800_defconfig
 create mode 100644 configs/udoo_defconfig
 delete mode 100644 configs/udoo_quad_defconfig
 create mode 100644 drivers/power/pmic/pmic_pfuze3000.c
 create mode 100644 include/configs/aristainetos2b.h
 create mode 100644 include/configs/ts4800.h
 create mode 100644 include/power/pfuze3000_pmic.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-08-02  9:23 Stefano Babic
@ 2015-08-02 15:53 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-08-02 15:53 UTC (permalink / raw)
  To: u-boot

On Sun, Aug 02, 2015 at 11:23:12AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 605e15db2b54302364a2528d3c6604fbc57be846:
> 
>   Merge git://git.denx.de/u-boot-x86 (2015-07-15 10:41:20 -0400)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to f85764cc1f6ab01ffc60dd78de9c4de4cff2b5ce:
> 
>   arm: mx6: tqma6: fix build for WRU-IV baseboard (2015-08-02 11:12:41
> +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150802/c06b53d0/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-08-02  9:23 Stefano Babic
  2015-08-02 15:53 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-08-02  9:23 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 605e15db2b54302364a2528d3c6604fbc57be846:

  Merge git://git.denx.de/u-boot-x86 (2015-07-15 10:41:20 -0400)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to f85764cc1f6ab01ffc60dd78de9c4de4cff2b5ce:

  arm: mx6: tqma6: fix build for WRU-IV baseboard (2015-08-02 11:12:41
+0200)

----------------------------------------------------------------
Adrian Alonso (1):
      imx: imximage: add new CHECK/CLR BIT command

Albert ARIBAUD \(3ADEV\) (3):
      net: fec_mxc: remove useless struct nbuf
      i2c: fix vf610 support
      tools: mkimage: fix imximage header size

Fabio Estevam (5):
      thermal: Fix comments
      power: pmic: Add support for MAX77696 PMIC
      warp: Add MAX77696 support
      mx6sabresd: Use 'int' for return values
      mx6sxsabresd: Use 'int' for return values

Guillaume GARDET (1):
      mx53loco: Use generic 'load' command instead of 'fatload'

Nikita Kiryanov (11):
      arm: mx6: cm-fx6: map HDMI to IPU1 DI0 explicitly
      arm: mx6: cm-fx6: make it possible to not init display
      arm: mx6: cm-fx6: add support for displaytype env var
      arm: mx6: cm-fx6: setup hdmi only on hdmi enable
      arm: mx6: cm-fx6: move CMD configs to defconfig
      arm: mx6: cm-fx6: move cm-fx6 target under ARCH_MX6
      arm: mx6: kconfig: don't select CPU_V7 per board
      arm: mx6: usb: kconfig: add USB_EHCI_MX6 kconfig option
      usb: kconfig: usb keyboard kconfig
      usb: kconfig: create a menu for usb
      sf: kconfig: add kconfig options for spi flashes

Otavio Salvador (13):
      cgtqmx6eval: Use default prompt
      cgtqmx6eval: Use the default CONFIG_SYS_PBSIZE
      cgtqmx6eval: Staticize when possible
      cgtqmx6eval: Improve the error handling
      cgtqmx6eval: Fit into single lines
      cgtqmx6eval: Add ESDHC3 support
      cgtqmx6eval: Add thermal support
      cgtqmx6eval: Add PMIC support
      cgtqmx6eval: Add USB support
      cgtqmx6eval: Add splash screen support
      cgtqmx6eval: Add SATA support
      cgtqmx6eval: Align DCD settings with Congatec's U-boot
      cgtqmx6eval: Use standard boot script

Peng Fan (23):
      imx: mx6 remove duplicated enable_cspi_clock
      imx: mx6 add i2c4 clock support for i.MX6SX
      mmc:fsl_esdhc invalidate dcache before read
      imx: add cpu type for i.MX6QP/DP
      imx: mx6: ccm: Change the clock settings for i.MX6QP
      imx: mx6qp Enable PRG clock for IPU
      imx: mx6sabresd/sabreauto runtime setting fdt_file
      imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support
      imx: mx6ul: Add i.MX6UL CPU type
      imx: mx6ul: Add pins IOMUX head file
      imx: mx6ul: Update imx registers head file
      imx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6UL
      imx-common: timer: add i.MX6UL support
      imx: mx6ul remove errata for i.MX6UL
      imx:mx6ul add clock support
      imx: mx6ul select SYS_L2CACHE_OFF
      imx: mx6ul update soc related settings
      imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL
      mxc: gpio add i.MX6UL support
      mx6_common: Fix LOADADDR and SYS_TEXT_BASE for i.MX6UL
      imx:mx6ul add dram spl configuration and header file
      imx: imx6_spl add mx6ul support
      imx: mx6ul_14x14_evk add basic board support

Peter Robinson (1):
      imx6: standardise OCOTP and fuse config to mx6_common

Stefan Roese (1):
      arm: mx6: tqma6: Add WRU-IV baseboard for the TQMa6 SoM

Stefano Babic (3):
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot
      arm: mx6: tqma6: fix build for WRU-IV baseboard

Tim Harvey (2):
      thermal:imx_thermal: enter busywait cooling loop when over max CPU
temp
      thermal: imx_thermal: fix busywait if IMX6 temp <0C

Ulises Cardenas (1):
      iMX: adding parsing to hab_status command

Ye.Li (1):
      imx: mx6: hab : Remove the cache issue workaroud in hab for i.MX6QP

 arch/arm/Kconfig                                  |   16 +-
 arch/arm/cpu/armv7/mx6/Kconfig                    |   13 +-
 arch/arm/cpu/armv7/mx6/clock.c                    |  211 ++++++++++-------
 arch/arm/cpu/armv7/mx6/ddr.c                      |   61 ++++-
 arch/arm/cpu/armv7/mx6/hab.c                      |  176 +++++++++++++-
 arch/arm/cpu/armv7/mx6/soc.c                      |   25 +-
 arch/arm/imx-common/cpu.c                         |    6 +
 arch/arm/imx-common/timer.c                       |    8 +-
 arch/arm/include/asm/arch-imx/cpu.h               |    5 +-
 arch/arm/include/asm/arch-mx6/clock.h             |    1 -
 arch/arm/include/asm/arch-mx6/crm_regs.h          |  139 ++++++-----
 arch/arm/include/asm/arch-mx6/hab.h               |   85 ++++++-
 arch/arm/include/asm/arch-mx6/imx-regs.h          |   64 ++++--
 arch/arm/include/asm/arch-mx6/mx6-ddr.h           |   45 ++++
 arch/arm/include/asm/arch-mx6/mx6-pins.h          |    2 +
 arch/arm/include/asm/arch-mx6/mx6ul-ddr.h         |   45 ++++
 arch/arm/include/asm/arch-mx6/mx6ul_pins.h        | 1065
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx6/sys_proto.h         |    4 +-
 arch/arm/include/asm/arch-vf610/crm_regs.h        |    3 +
 arch/arm/include/asm/arch-vf610/imx-regs.h        |    3 +
 arch/arm/include/asm/arch-vf610/iomux-vf610.h     |   11 +-
 arch/arm/include/asm/imx-common/iomux-v3.h        |    6 +
 board/compulab/cm_fx6/cm_fx6.c                    |   86 ++++---
 board/compulab/cm_fx6/spl.c                       |    2 +-
 board/congatec/cgtqmx6eval/cgtqmx6eval.c          |  353
+++++++++++++++++++++++++++-
 board/congatec/cgtqmx6eval/imximage.cfg           |  128 +++++------
 board/freescale/mx6qsabreauto/mx6qp.cfg           |  145 ++++++++++++
 board/freescale/mx6qsabreauto/mx6qsabreauto.c     |   40 +++-
 board/freescale/mx6sabresd/mx6sabresd.c           |   13 +-
 board/freescale/mx6sxsabresd/mx6sxsabresd.c       |    3 +-
 board/freescale/mx6ul_14x14_evk/Kconfig           |   15 ++
 board/freescale/mx6ul_14x14_evk/MAINTAINERS       |    6 +
 board/freescale/mx6ul_14x14_evk/Makefile          |    6 +
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c |  636
+++++++++++++++++++++++++++++++++++++++++++++++++++
 board/tqc/tqma6/Kconfig                           |    5 +
 board/tqc/tqma6/Makefile                          |    1 +
 board/tqc/tqma6/tqma6_wru4.c                      |  346
++++++++++++++++++++++++++++
 board/warp/warp.c                                 |   50 ++++
 configs/cgtqmx6qeval_defconfig                    |    3 +
 configs/cm_fx6_defconfig                          |   20 ++
 configs/mx6qpsabreauto_defconfig                  |    4 +
 configs/mx6ul_14x14_evk_defconfig                 |    4 +
 configs/tqma6s_wru4_mmc_defconfig                 |   13 ++
 drivers/gpio/mxc_gpio.c                           |    4 +
 drivers/i2c/mxc_i2c.c                             |    3 +-
 drivers/mmc/fsl_esdhc.c                           |    8 +
 drivers/mtd/spi/Kconfig                           |   44 ++++
 drivers/net/fec_mxc.c                             |   20 +-
 drivers/power/pmic/Makefile                       |    1 +
 drivers/power/pmic/pmic_max77696.c                |   32 +++
 drivers/thermal/imx_thermal.c                     |   18 +-
 drivers/usb/Kconfig                               |   29 +++
 drivers/usb/host/Kconfig                          |    7 +
 include/configs/aristainetos-common.h             |    3 -
 include/configs/cgtqmx6eval.h                     |  165 +++++++++++---
 include/configs/cm_fx6.h                          |   17 --
 include/configs/embestmx6boards.h                 |    5 -
 include/configs/gw_ventana.h                      |    5 -
 include/configs/imx6_spl.h                        |    2 +-
 include/configs/mx53loco.h                        |    7 +-
 include/configs/mx6_common.h                      |   10 +-
 include/configs/mx6cuboxi.h                       |    2 -
 include/configs/mx6qsabreauto.h                   |    5 -
 include/configs/mx6sabre_common.h                 |   28 ++-
 include/configs/mx6sabresd.h                      |    5 -
 include/configs/mx6slevk.h                        |    5 -
 include/configs/mx6sxsabresd.h                    |    5 -
 include/configs/mx6ul_14x14_evk.h                 |  227 ++++++++++++++++++
 include/configs/nitrogen6x.h                      |    5 -
 include/configs/novena.h                          |    6 -
 include/configs/ot1200.h                          |    4 -
 include/configs/platinum.h                        |    4 -
 include/configs/tbs2910.h                         |    6 -
 include/configs/tqma6.h                           |    6 +-
 include/configs/tqma6_wru4.h                      |   71 ++++++
 include/configs/wandboard.h                       |    5 -
 include/configs/warp.h                            |   13 +-
 include/power/max77696_pmic.h                     |   60 +++++
 include/thermal.h                                 |   16 +-
 tools/imximage.c                                  |   95 ++++++--
 tools/imximage.h                                  |   26 ++-
 81 files changed, 4299 insertions(+), 548 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6ul-ddr.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6ul_pins.h
 create mode 100644 board/freescale/mx6qsabreauto/mx6qp.cfg
 create mode 100644 board/freescale/mx6ul_14x14_evk/Kconfig
 create mode 100644 board/freescale/mx6ul_14x14_evk/MAINTAINERS
 create mode 100644 board/freescale/mx6ul_14x14_evk/Makefile
 create mode 100644 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
 create mode 100644 board/tqc/tqma6/tqma6_wru4.c
 create mode 100644 configs/mx6qpsabreauto_defconfig
 create mode 100644 configs/mx6ul_14x14_evk_defconfig
 create mode 100644 configs/tqma6s_wru4_mmc_defconfig
 create mode 100644 drivers/power/pmic/pmic_max77696.c
 create mode 100644 include/configs/mx6ul_14x14_evk.h
 create mode 100644 include/configs/tqma6_wru4.h
 create mode 100644 include/power/max77696_pmic.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-07-03 12:22 Stefano Babic
@ 2015-07-06 15:24 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-07-06 15:24 UTC (permalink / raw)
  To: u-boot

On Fri, Jul 03, 2015 at 02:22:10PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 64d16706a052553c85d2f8f4c741879a4e3e6116:
> 
>   Nokia RX-51: Fix calculating return address in save_boot_params
> (2015-06-12 08:11:18 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to aa5a0d98943e1b32109fd1fb325007c6cdcedc50:
> 
>   colibri_vf: Increase console IO buffer size to 1024 (2015-07-03
> 09:38:10 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150706/2b2f7b75/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-07-03 12:22 Stefano Babic
  2015-07-06 15:24 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-07-03 12:22 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 64d16706a052553c85d2f8f4c741879a4e3e6116:

  Nokia RX-51: Fix calculating return address in save_boot_params
(2015-06-12 08:11:18 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to aa5a0d98943e1b32109fd1fb325007c6cdcedc50:

  colibri_vf: Increase console IO buffer size to 1024 (2015-07-03
09:38:10 +0200)

----------------------------------------------------------------
Chris Kuethe (1):
      patch - arm - define SYS_CACHELINE_SIZE for mx5

Fabio Estevam (1):
      mx6cuboxi: Fix boot of hummingboard dual-lite

Marek Vasut (1):
      imx6: novena: Reinstate missing CONFIG_FAT_WRITE

Markus Niebel (5):
      arm: imx6: tqma6: add kconfig to board header
      arm: mx6: tqma6: CPU type selection via Kconfig
      arm: imx6: tqma6: implement IMX_CONFIG with Kconfig
      arm: imx6: tqma6: boot device selection via Kconfig
      arm: imx6: tqma6: implement KConfig baseboard selection

Peng Fan (3):
      imx: mx6 correct is_soc_rev usage
      imx: mx6 correct get_cpu_rev
      imx: mx6 introuduce macro is_mx6dqp

Peter Robinson (2):
      Drop duplicate CONFIG_SYS_NO_FLASH from mx6_common
      mx6cuboxi: drop options that are duplicated in mx6_common

Sanchayan Maity (1):
      colibri_vf: Increase console IO buffer size to 1024

Soeren Moch (2):
      tbs2910: add thermal support
      tbs2910: add PRE_CONSOLE_BUFFER support

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot

 arch/arm/Kconfig                          |  5 ---
 arch/arm/cpu/armv7/mx6/Kconfig            |  5 +++
 arch/arm/cpu/armv7/mx6/soc.c              |  4 ++-
 arch/arm/imx-common/timer.c               |  4 +--
 arch/arm/include/asm/arch-mx5/imx-regs.h  |  2 ++
 arch/arm/include/asm/arch-mx6/imx-regs.h  |  1 +
 arch/arm/include/asm/arch-mx6/sys_proto.h |  8 +++--
 board/solidrun/mx6cuboxi/mx6cuboxi.c      |  4 +--
 board/tqc/tqma6/Kconfig                   | 58
+++++++++++++++++++++++++++++++
 configs/tbs2910_defconfig                 |  2 ++
 configs/tqma6q_mba6_mmc_defconfig         |  2 +-
 configs/tqma6q_mba6_spi_defconfig         |  3 +-
 configs/tqma6s_mba6_mmc_defconfig         |  3 +-
 configs/tqma6s_mba6_spi_defconfig         |  4 ++-
 include/configs/colibri_vf.h              |  2 +-
 include/configs/mx6_common.h              |  1 -
 include/configs/mx6cuboxi.h               |  8 -----
 include/configs/novena.h                  |  1 +
 include/configs/tbs2910.h                 |  6 ++++
 include/configs/tqma6.h                   |  1 +
 20 files changed, 98 insertions(+), 26 deletions(-)


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-06-08  7:14 Stefano Babic
@ 2015-06-08 21:53 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-06-08 21:53 UTC (permalink / raw)
  To: u-boot

On Mon, Jun 08, 2015 at 09:14:01AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 9bea236b3402a262772b66d055ec6431cbd3ba87:
> 
>   Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2015-05-26
> 10:38:01 -0400)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 943a3f2ccb71bcb4a6041bc2946129c4d4bb197e:
> 
>   imx: drop warning: unused variable 'max_freq' (2015-06-08 08:55:08 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150608/a914e4e3/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-06-08  7:14 Stefano Babic
  2015-06-08 21:53 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-06-08  7:14 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 9bea236b3402a262772b66d055ec6431cbd3ba87:

  Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2015-05-26
10:38:01 -0400)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 943a3f2ccb71bcb4a6041bc2946129c4d4bb197e:

  imx: drop warning: unused variable 'max_freq' (2015-06-08 08:55:08 +0200)

----------------------------------------------------------------
Bhuvanchandra DV (9):
      dm: gpio: uclass: Add flag to control sequence numbering
      dm: gpio: vf610: Add GPIO driver support
      colibri_vf: Add pinmux entries for GPIOs
      colibri_vf: Enable GPIO support
      arm: vf610: Add clock support for DSPI
      arm: vf610: Add iomux support for DSPI
      vf610: dts: Add device tree support
      colibri-vf: Enable SPI support
      colibri_vf: Add separate defconfig for device tree support

Christian Gmeiner (2):
      ot1200: setup i2c bus in board_early_init_f(..)
      ot1200: setup i2c bus 1 in setup_iomux_i2c()

Fabio Estevam (7):
      warp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE
      warp: Fix CONFIG_SYS_FSL_ESDHC_ADDR
      warp: Enable CONFIG_SUPPORT_EMMC_BOOT
      warp: Add fuse command support
      warp: Fix the 'saveenv' command
      wandboard: Add board revision detection support
      mx6_common: Fix LOADADDR and SYS_TEXT_BASE for MX6SL and MX6SX

Markus Niebel (2):
      arm: mx6: tqma6: fix spelling error in condition
      arm: mx6: tqma6: use default CONFIG_SYS_PBSIZE

Sanchayan Maity (2):
      usb: ehci-vf: Add weak function for board specific initialisation
      colibri_vf: Enable board specific USB initialisation for USB pen gpio

Stefan Wahren (1):
      mxs: Do not disable bo detection when DC-DC is already enabled

Stefano Babic (3):
      imx: drop warning: unused variable 'max_freq'
      Revert "imx: drop warning: unused variable 'max_freq'"
      imx: drop warning: unused variable 'max_freq'

Tim Harvey (6):
      pci: imx: display message if no pcie link
      imx: ventana: various board-specific GPIO config updates
      imx: ventana: make model env var automatic and non-overridable
      imx: ventana: make fdt_file1 and fdt_file2 automatic and
non-overridable
      imx: ventana: hang if board model could not be determined
      imx: ventana: skip mtdparts fixup if no flash

 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c   |  10 ++---
 arch/arm/cpu/armv7/vf610/generic.c            |   7 ++++
 arch/arm/dts/Makefile                         |   3 ++
 arch/arm/dts/vf-colibri.dtsi                  |  21 ++++++++++
 arch/arm/dts/vf.dtsi                          | 100
++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/vf500-colibri.dts                |  18 +++++++++
 arch/arm/dts/vf610-colibri.dts                |  18 +++++++++
 arch/arm/imx-common/cpu.c                     |   3 +-
 arch/arm/imx-common/iomux-v3.c                |  26 ++++++++++++
 arch/arm/include/asm/arch-vf610/clock.h       |   1 +
 arch/arm/include/asm/arch-vf610/crm_regs.h    |   4 ++
 arch/arm/include/asm/arch-vf610/gpio.h        |  29 ++++++++++++++
 arch/arm/include/asm/arch-vf610/imx-regs.h    |   5 +++
 arch/arm/include/asm/arch-vf610/iomux-vf610.h |  59
+++++++++++++++++++++++++++
 arch/arm/include/asm/imx-common/iomux-v3.h    |   6 +++
 board/bachmann/ot1200/ot1200.c                |  55
+++++++++++++++++---------
 board/gateworks/gw_ventana/common.c           |  56
++++++++++++++++++--------
 board/gateworks/gw_ventana/common.h           |   6 +--
 board/gateworks/gw_ventana/gw_ventana.c       |  41 ++++++++-----------
 board/gateworks/gw_ventana/gw_ventana_spl.c   |   6 +--
 board/toradex/colibri_vf/MAINTAINERS          |   4 ++
 board/toradex/colibri_vf/colibri_vf.c         | 106
+++++++++++++++++++++++++++++++++++++++++++++++++
 board/wandboard/wandboard.c                   |  26 +++++++++++-
 board/warp/README                             |   2 +-
 configs/colibri_vf_defconfig                  |   1 +
 configs/colibri_vf_dtb_defconfig              |   8 ++++
 drivers/gpio/Kconfig                          |   7 ++++
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-uclass.c                    |   1 +
 drivers/gpio/vybrid_gpio.c                    | 169
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/pci/pcie_imx.c                        |   4 +-
 drivers/usb/host/ehci-vf.c                    |   8 ++++
 include/configs/colibri_vf.h                  |  12 ++++++
 include/configs/mx6_common.h                  |  10 ++++-
 include/configs/tqma6.h                       |  18 ++++-----
 include/configs/tqma6_mba6.h                  |   4 +-
 include/configs/wandboard.h                   |   8 +++-
 include/configs/warp.h                        |   9 ++++-
 38 files changed, 776 insertions(+), 96 deletions(-)
 create mode 100644 arch/arm/dts/vf-colibri.dtsi
 create mode 100644 arch/arm/dts/vf.dtsi
 create mode 100644 arch/arm/dts/vf500-colibri.dts
 create mode 100644 arch/arm/dts/vf610-colibri.dts
 create mode 100644 arch/arm/include/asm/arch-vf610/gpio.h
 create mode 100644 configs/colibri_vf_dtb_defconfig
 create mode 100644 drivers/gpio/vybrid_gpio.c


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-05-26 14:18 Stefano Babic
@ 2015-05-26 17:37 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-05-26 17:37 UTC (permalink / raw)
  To: u-boot

On Tue, May 26, 2015 at 04:18:13PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> 
> The following changes since commit af1db4a39034ae15a91f0dae7da9548f0501febf:
> 
>   imx: ventana: use stack relocation (2015-05-15 19:25:07 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 1022b85cb0e143b4f3a8e6c7d9258d516920d464:
> 
>   mx6: standardise CONFIG_CMD_CACHE (2015-05-26 15:58:57 +0200)
> 

Note:
w+(mx53ard,mx51evk,m53evk,mx51_efikamx,usbarmory,vision2,ima3-mx53,mx51_efikasb,mx53smd,mx53evk) ../arch/arm/imx-common/cpu.c: In function 'print_cpuinfo':
w+(mx53ard,mx51evk,m53evk,mx51_efikamx,usbarmory,vision2,ima3-mx53,mx51_efikasb,mx53smd,mx53evk) ../arch/arm/imx-common/cpu.c:148:14: warning: unused variable 'max_freq' [-Wunused-variable]

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150526/5031eb34/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-05-26 14:18 Stefano Babic
  2015-05-26 17:37 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-05-26 14:18 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !


The following changes since commit af1db4a39034ae15a91f0dae7da9548f0501febf:

  imx: ventana: use stack relocation (2015-05-15 19:25:07 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 1022b85cb0e143b4f3a8e6c7d9258d516920d464:

  mx6: standardise CONFIG_CMD_CACHE (2015-05-26 15:58:57 +0200)

----------------------------------------------------------------
Axel Lin (2):
      pwm: imx: Prevent NULL pointer dereference
      pwm: imx: Remove unreachable code

Fabio Estevam (2):
      hummingboard: Remove unused directory
      wandboard: Switch to SPL support

Heiko Schocher (3):
      arm, imx6, i2c: add I2C4 for MX6DL
      i2c, mxc: rework i2c base address names for different SoCs
      arm, imx6: add support for aristainetos2 board

Nikolay Dimitrov (3):
      imx: riotboard, marsboard: Enable thermal support
      imx: riotboard: Enable thermal DM support
      imx: marsboard: Enable thermal DM support

Peng Fan (3):
      imx: mx6sx enable SION for i2c pin mux
      pmic: pfuze100 fix typo
      imx: dma: correct MXS_DMA_ALIGNMENT

Peter Robinson (10):
      novena: standardise mx6_common.h include
      imx6: move all standard includes to mx6_common.h
      imx6: move generic imx6 options to mx6_common.h
      imx6: move standard ATAG configs to mx6_common.h
      imx6: move MXC_GPIO define to mx6_common.h
      imx6: centralise common boot options in mx6_common.h
      imx6: move generic miscellaneous and overwrite options
      imx6: standardise filesystem and boot options
      imx6: generic MMC config options to mx6_common
      mx6: standardise CONFIG_CMD_CACHE

Prabhakar Kushwaha (1):
      arm/imx-common: Fix warning 'get_reset_cause' defined but not used

Tim Harvey (17):
      env_nand: use nand_spl_load_image for readenv if SPL
      imx: ventana: config: use MMC SPL RAW support
      imx: ventana: (cosmetic) clean up size defines for improved
readability
      imx: ventana: add pmic_setup to SPL
      arm: mx6: ddr: set fast-exit on DDR3 if pd_fast_exit specified
      mx6: add OTP bank1 registers
      imx: mx6: add get_cpu_speed_grade_hz func to return MHz speed
grade from OTP
      imx: mx6: display max cpu frequency in print_cpuinfo()
      imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade
from OTP
      imx: mx6: add display of CPU temperature grade in print_cpuinfo()
      thermal: imx_thermal: use CPU temperature grade for trip points
      imx: ventana: config: enable Falcon mode
      thermal: imx_thermal: increase critical temperature threshold
      imx: ventana: update MMC env configuration
      imx: ventana: update README for micro-SD boot medium
      imx: ventana: update README with Falcon mode documentation
      spl: spl_mmc: fix mmc Falcon mode regression

 arch/arm/Kconfig                                       |   5 +
 arch/arm/cpu/armv7/mx6/clock.c                         |  33 +++--
 arch/arm/cpu/armv7/mx6/ddr.c                           |   3 +-
 arch/arm/cpu/armv7/mx6/soc.c                           |  79 ++++++++++++
 arch/arm/imx-common/cpu.c                              |  43 ++++++-
 arch/arm/imx-common/i2c-mxv7.c                         |   5 +-
 arch/arm/include/asm/arch-imx/imx-regs.h               |   2 +-
 arch/arm/include/asm/arch-mx25/imx-regs.h              |   6 +-
 arch/arm/include/asm/arch-mx27/imx-regs.h              |   4 +-
 arch/arm/include/asm/arch-mx6/crm_regs.h               |   2 +
 arch/arm/include/asm/arch-mx6/imx-regs.h               |  20 +++
 arch/arm/include/asm/arch-mx6/mx6sx_pins.h             |  40 +++---
 arch/arm/include/asm/arch-mx6/sys_proto.h              |   2 +
 arch/arm/include/asm/arch-vf610/imx-regs.h             |   2 +-
 arch/arm/include/asm/imx-common/dma.h                  |   2 +-
 board/aristainetos/Kconfig                             |  13 ++
 board/aristainetos/MAINTAINERS                         |   2 +
 board/aristainetos/aristainetos-v1.c                   | 279
+++++++++++++++++++++++++++++++++++++++++
 board/aristainetos/aristainetos-v2.c                   | 627
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/aristainetos/aristainetos.c                      | 323
++++++++++-------------------------------------
 board/aristainetos/aristainetos2.cfg                   |  34 +++++
 board/aristainetos/axi.cfg                             |  22 ++++
 board/aristainetos/clocks2.cfg                         |  24 ++++
 board/aristainetos/ddr-setup2.cfg                      |  59 +++++++++
 board/aristainetos/nt5cc256m16cp.cfg                   |  60 +++++++++
 board/freescale/common/pfuze.c                         |   4 +-
 board/gateworks/gw_ventana/README                      | 243
++++++++++++++++++++++++++++++++++-
 board/gateworks/gw_ventana/gw_ventana_spl.c            |  23 ++++
 board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg       |  74 -----------
 board/solidrun/mx6-microsom/clocks.cfg                 |  33 -----
 board/solidrun/mx6-microsom/ddr-800mhz-32bit-setup.cfg |  76 -----------
 board/wandboard/MAINTAINERS                            |   4 +-
 board/wandboard/Makefile                               |   2 +-
 board/wandboard/README                                 |  22 ++--
 board/wandboard/spl.c                                  | 317
++++++++++++++++++++++++++++++++++++++++++++++
 common/env_nand.c                                      |   7 ++
 common/spl/spl_mmc.c                                   |   2 +-
 configs/aristainetos2_defconfig                        |   3 +
 configs/marsboard_defconfig                            |   2 +
 configs/riotboard_defconfig                            |   2 +
 configs/wandboard_defconfig                            |   6 +
 configs/wandboard_dl_defconfig                         |   3 -
 configs/wandboard_quad_defconfig                       |   3 -
 configs/wandboard_solo_defconfig                       |   3 -
 drivers/i2c/mxc_i2c.c                                  |  46 +++----
 drivers/pwm/pwm-imx-util.c                             |   4 -
 drivers/pwm/pwm-imx.c                                  |  12 ++
 drivers/thermal/imx_thermal.c                          |  36 ++++--
 include/configs/aristainetos-common.h                  | 276
++++++++++++++++++++++++++++++++++++++++
 include/configs/aristainetos.h                         | 314
+---------------------------------------------
 include/configs/aristainetos2.h                        |  56 +++++++++
 include/configs/cgtqmx6eval.h                          |  60 +--------
 include/configs/cm_fx6.h                               |  36 ------
 include/configs/embestmx6boards.h                      |  53 +-------
 include/configs/gw_ventana.h                           |  96 +++++---------
 include/configs/mx6_common.h                           |  74 +++++++++++
 include/configs/mx6cuboxi.h                            |  44 -------
 include/configs/mx6qarm2.h                             |  57 +--------
 include/configs/mx6sabre_common.h                      |  65 +---------
 include/configs/mx6sabresd.h                           |   3 -
 include/configs/mx6slevk.h                             |  60 +--------
 include/configs/mx6sxsabresd.h                         |  59 ---------
 include/configs/nitrogen6x.h                           |  69 +---------
 include/configs/novena.h                               |  47 +------
 include/configs/ot1200.h                               |  68 +---------
 include/configs/platinum.h                             |  59 ---------
 include/configs/platinum_picon.h                       |   2 -
 include/configs/platinum_titanium.h                    |   2 -
 include/configs/secomx6quq7.h                          |  59 +--------
 include/configs/tbs2910.h                              |  49 +-------
 include/configs/titanium.h                             |  58 ---------
 include/configs/tqma6.h                                |  62 ---------
 include/configs/udoo.h                                 |  61 +--------
 include/configs/wandboard.h                            |  86 +++----------
 include/configs/warp.h                                 |  57 ---------
 include/imx_thermal.h                                  |   6 +
 include/power/pfuze100_pmic.h                          |   2 +-
 78 files changed, 2635 insertions(+), 2099 deletions(-)
 create mode 100644 board/aristainetos/aristainetos-v1.c
 create mode 100644 board/aristainetos/aristainetos-v2.c
 create mode 100644 board/aristainetos/aristainetos2.cfg
 create mode 100644 board/aristainetos/axi.cfg
 create mode 100644 board/aristainetos/clocks2.cfg
 create mode 100644 board/aristainetos/ddr-setup2.cfg
 create mode 100644 board/aristainetos/nt5cc256m16cp.cfg
 delete mode 100644 board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg
 delete mode 100644 board/solidrun/mx6-microsom/clocks.cfg
 delete mode 100644 board/solidrun/mx6-microsom/ddr-800mhz-32bit-setup.cfg
 create mode 100644 board/wandboard/spl.c
 create mode 100644 configs/aristainetos2_defconfig
 create mode 100644 configs/wandboard_defconfig
 delete mode 100644 configs/wandboard_dl_defconfig
 delete mode 100644 configs/wandboard_quad_defconfig
 delete mode 100644 configs/wandboard_solo_defconfig
 create mode 100644 include/configs/aristainetos-common.h
 create mode 100644 include/configs/aristainetos2.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-05-15 15:18 Stefano Babic
@ 2015-05-16 11:36 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-05-16 11:36 UTC (permalink / raw)
  To: u-boot

On Fri, May 15, 2015 at 05:18:26PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit ace97d26176a3ebc9ec07738450de93eea35975c:
> 
>   Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze
> (2015-04-29 06:46:33 -0400)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 6f63370510ebd7b6dfc83ef4cc6bfd448ecc5dc2:
> 
>   imx: ventana: use stack relocation (2015-05-15 16:42:14 +0200)
> 

This was updated a little bit more off-list and I've applied to
u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150516/885754f0/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-05-15 15:18 Stefano Babic
  2015-05-16 11:36 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-05-15 15:18 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit ace97d26176a3ebc9ec07738450de93eea35975c:

  Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze
(2015-04-29 06:46:33 -0400)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 6f63370510ebd7b6dfc83ef4cc6bfd448ecc5dc2:

  imx: ventana: use stack relocation (2015-05-15 16:42:14 +0200)

----------------------------------------------------------------
Brecht Neyrinck (1):
      bugfix i.mx6 pwm: prevent overflow of period_c * duty_ns

Fabio Estevam (11):
      mx6cuboxi: Add HDMI output support
      mx6cuboxi: Add USB host support
      mx6cuboxi: Allow HDMI and USB keyboard to be stdout/stdin
      logos: Add Solidrun's logo
      mx6cuboxi: Fix Ethernet PHY detection problem
      mx6cuboxi: Pull down PAD_ENET_RXD0/RXD1
      mx6cuboxi: Skip usb initialization when booting without HDMI
      hummingboard: Remove mx6solo specific support
      mx6cuboxi: Mention Cubox-i in the README
      warp: README: Fix typo
      mx6: Set shared override bit in PL310 AUX_CTRL register

Heiko Schocher (2):
      arm, imx6, i2c: add I2C4 for MX6DL
      i2c, mxc: rework i2c base address names for different SoCs

Nikolay Dimitrov (2):
      arm: mx6: Clamp MMDC and DDR3 clocks for timing calculations
      arm: mx6: ddr3: Remove dead code

Soeren Moch (4):
      tbs2910: support for usb otg host mode
      tbs2910: only enable vga output for stdout/stderr when hdmi detected
      tbs2910: use default CONFIG_SYS_PBSIZE
      tbs2910: add CONFIG_SUPPORT_EMMC_BOOT

Stefan Roese (2):
      arm: mx6: tqma6: Fix USB and add other filesystems
      arm: mx6: tqma6: Update to optionally configure an alternative SPI
setup

Stefano Babic (2):
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot

Tim Harvey (17):
      imx: ventana: fix boot to SD
      imx: ventana: set dtype env var to boot media
      imx: ventana: display SPL boot device
      imx: ventana: config: enable gpio command
      imx: ventana: config: enable driver model
      imx: ventana: register gpio's with gpio_request
      imx: ventana: enable DM_SERIAL
      imx: ventana: config: enable Thermal support
      imx: ventana: fix pcie reset for GW522x
      imx: ventana: default msata/pci mux to pci before PCI enumeration
      imx: ventana: split out common functions between SPL and uboot
      imx: ventana: move GSC boot watchdog disable function to gsc.c
      imx: ventana: detect pmic using i2c probe instead of board model
      imx: ventana: use common uart and i2c setup functions in SPL
      imx: ventana: add gpio setup to SPL
      imx: ventana: add GSC boot watchdog disable to SPL
      imx: ventana: use stack relocation

Ulises Cardenas (2):
      Fix mxc_hab documenation
      imx: dek_blob: Add explicit include for mapmem

 arch/arm/Kconfig                            |   5 -
 arch/arm/cpu/armv7/mx6/clock.c              |  33 +++--
 arch/arm/cpu/armv7/mx6/ddr.c                |  52 +++----
 arch/arm/cpu/armv7/mx6/soc.c                |   8 +
 arch/arm/imx-common/cmd_dek.c               |   1 +
 arch/arm/imx-common/i2c-mxv7.c              |   5 +-
 arch/arm/include/asm/arch-imx/imx-regs.h    |   2 +-
 arch/arm/include/asm/arch-mx25/imx-regs.h   |   6 +-
 arch/arm/include/asm/arch-mx27/imx-regs.h   |   4 +-
 arch/arm/include/asm/arch-mx6/crm_regs.h    |   2 +
 arch/arm/include/asm/arch-mx6/imx-regs.h    |   1 +
 arch/arm/include/asm/arch-vf610/imx-regs.h  |   2 +-
 arch/arm/include/asm/pl310.h                |   2 +
 board/gateworks/gw_ventana/Makefile         |   2 +-
 board/gateworks/gw_ventana/common.c         | 827
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/gateworks/gw_ventana/common.h         |  98 +++++++++++++
 board/gateworks/gw_ventana/gsc.c            |  27 ++++
 board/gateworks/gw_ventana/gsc.h            |   1 +
 board/gateworks/gw_ventana/gw_ventana.c     | 911
++++++------------------------------------------------------------------------------------------------------------
 board/gateworks/gw_ventana/gw_ventana_spl.c |  86 +++++------
 board/solidrun/hummingboard/Kconfig         |  15 --
 board/solidrun/hummingboard/MAINTAINERS     |   6 -
 board/solidrun/hummingboard/Makefile        |   9 --
 board/solidrun/hummingboard/README          |  40 -----
 board/solidrun/hummingboard/hummingboard.c  | 182 -----------------------
 board/solidrun/hummingboard/solo.cfg        |  25 ----
 board/solidrun/mx6cuboxi/README             |  10 +-
 board/solidrun/mx6cuboxi/mx6cuboxi.c        | 158 +++++++++++++++++++-
 board/tbs/tbs2910/tbs2910.c                 |  10 ++
 board/tqc/tqma6/tqma6.c                     |   2 +-
 board/warp/README                           |   4 +-
 configs/gwventana_defconfig                 |   2 +
 configs/hummingboard_solo_defconfig         |   3 -
 doc/README.mxc_hab                          |  12 +-
 drivers/i2c/mxc_i2c.c                       |  40 ++---
 drivers/pwm/pwm-imx-util.c                  |   2 +-
 include/configs/gw_ventana.h                |  22 ++-
 include/configs/hummingboard.h              | 224
----------------------------
 include/configs/mx6cuboxi.h                 |  43 +++++-
 include/configs/tbs2910.h                   |  21 ++-
 include/configs/tqma6.h                     |   7 +-
 tools/logos/solidrun.bmp                    | Bin 0 -> 5558 bytes
 42 files changed, 1390 insertions(+), 1522 deletions(-)
 create mode 100644 board/gateworks/gw_ventana/common.c
 create mode 100644 board/gateworks/gw_ventana/common.h
 delete mode 100644 board/solidrun/hummingboard/Kconfig
 delete mode 100644 board/solidrun/hummingboard/MAINTAINERS
 delete mode 100644 board/solidrun/hummingboard/Makefile
 delete mode 100644 board/solidrun/hummingboard/README
 delete mode 100644 board/solidrun/hummingboard/hummingboard.c
 delete mode 100644 board/solidrun/hummingboard/solo.cfg
 delete mode 100644 configs/hummingboard_solo_defconfig
 delete mode 100644 include/configs/hummingboard.h
 create mode 100644 tools/logos/solidrun.bmp


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-04-28 15:01 Stefano Babic
@ 2015-04-29 14:28 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-04-29 14:28 UTC (permalink / raw)
  To: u-boot

On Tue, Apr 28, 2015 at 05:01:11PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit f33cdaa4c3da4a8fd35aa2f9a3172f31cc887b35:
> 
>   Prepare v2015.04 (2015-04-13 10:53:03 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 205d58699b157df75f1aa0b363ea9c21add21a0c:
> 
>   mx6cuboxi: Load the correct 'fdtfile' variable (2015-04-27 13:13:58 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150429/d85f31d0/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-04-28 15:01 Stefano Babic
  2015-04-29 14:28 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-04-28 15:01 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit f33cdaa4c3da4a8fd35aa2f9a3172f31cc887b35:

  Prepare v2015.04 (2015-04-13 10:53:03 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 205d58699b157df75f1aa0b363ea9c21add21a0c:

  mx6cuboxi: Load the correct 'fdtfile' variable (2015-04-27 13:13:58 +0200)

----------------------------------------------------------------
Eric Nelson (1):
      nitrogen6x: allow gzipped bitmap display

Fabio Estevam (9):
      mx6: Add initial SPL support for HummingBoard-i2eX
      mx6sabresd: Fix SPL memory description
      mx6sabresd: Remove uneeded ifdef
      mx6cuboxi: Fix the defconfig name
      mx6cuboxi: Prepare for multi SoC support
      mx6cuboxi: Introduce multi-SoC support
      mx6cuboxi: Differentiate Cubox-i and Hummingboard
      mx6cuboxi: Use more standard namings for fdt variables
      mx6cuboxi: Load the correct 'fdtfile' variable

J?rg Krause (1):
      ARM: mxs: Get boot mode from OCRAM

Pushpal Sidhu (3):
      imx: ventana: add DT fixup for GW522x to change PCIE_RST# GPIO
      imx: ventana: Add new memory configuration
      imx: ventana: Update missing memory/calib handling

Stefan Roese (1):
      arm: mx6: tqma6: Extract baseboard configs into separate config file

Tim Harvey (34):
      arm: mx6: ddr: add pd_fast_exit flag to system information
      fdt: add new fdt_fixup_display function to configure display
      imx: ventana: disable 4k tftp/nfs packets
      imx: ventana: add i210 support
      imx: ventana: assign default ethprime dynamically
      imx: ventana: remove unused GPIO configuration
      imx: ventana: add usb_pcisel hwconfig support
      imx: ventana: enable precharge power-down fast-exit mode
      imx: ventana: add support for 4Gb density mem devices with IMX6DL
      imx: ventana: set LTC3676 PMIC to appropriate values per datasheet
      imx: ventana: config: add USB Mass Storage (ums) support
      imx: ventana: config: Support ramdisk
      imx: ventana: config: enable edid support
      imx: ventana: config: enable EXT4 filesystem read/write support
      imx: ventana: fix various sparse warnings
      imx: ventana: disable IMX6 watchdogs on GW51xx RevA and RevB
      imx: ventana: Add support for GW551x
      imx: ventana: add usb_pgood_delay 2sec default
      imx: ventana: add wdis config for GW5520
      imx: ventana: only pinmux FEC enet signals for boards using it
      imx: ventana: update boot scripts to support ubifs boot vol
      imx: ventana: remove GSC hwmon voltage rail min/max test
      imx: ventana: add mem_mb dynamic env var
      imx: ventana: gsc: add new hwmon rails
      imx: ventana: added DT fixup for GW551x-A video input
      imx: ventana: updated 16bit DDR calibration
      imx: ventana: remove 128x16 calibration (share with 128x32)
      imx: ventana: add DT fixup for GW54xx compatibility with older kernels
      imx: ventana: add support for DLC-700JMGT4 and DLC-800FIGT3 LCD
displays
      imx: ventana: added device-tree display configuration for LVDS
displays
      imx: ventana: add 'gsc wd' command for enabling and disabling GSC
watchdog
      imx: ventana: use hdmiinfmt env var to override HDMI capture format
      imx: ventana: set HDMI video in to yuv422bt656 for GW551x-A
      power: pfuze100: fix LDO_EN bit value

gaurav rana (1):
      iMX: Fix compilation error when enabling SECURE_BOOT

 arch/arm/Kconfig                            |   6 ++
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c       |  29 ++--------
 arch/arm/cpu/armv7/mx6/ddr.c                |   7 ++-
 arch/arm/include/asm/arch-mx6/mx6-ddr.h     |   1 +
 board/freescale/common/Makefile             |   3 +-
 board/freescale/mx6sabresd/mx6sabresd.c     |  13 ++---
 board/gateworks/gw_ventana/eeprom.c         |  10 +++-
 board/gateworks/gw_ventana/gsc.c            | 130
+++++++++++++++++++++++++++++------------
 board/gateworks/gw_ventana/gsc.h            |  10 +++-
 board/gateworks/gw_ventana/gw_ventana.c     | 367
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------
 board/gateworks/gw_ventana/gw_ventana_spl.c | 129
++++++++++++++++++++++++++++++++++++-----
 board/gateworks/gw_ventana/ventana_eeprom.h |   1 +
 board/solidrun/mx6cuboxi/Kconfig            |  15 +++++
 board/solidrun/mx6cuboxi/MAINTAINERS        |   6 ++
 board/solidrun/mx6cuboxi/Makefile           |   9 +++
 board/solidrun/mx6cuboxi/README             |  21 +++++++
 board/solidrun/mx6cuboxi/mx6cuboxi.c        | 510
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 common/fdt_support.c                        |  29 ++++++++++
 configs/mx6cuboxi_defconfig                 |   6 ++
 include/configs/gw_ventana.h                |  68 ++++++++++++++--------
 include/configs/mx6cuboxi.h                 | 218
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/configs/nitrogen6x.h                |   3 +
 include/configs/tqma6.h                     |  57 ++++++------------
 include/configs/tqma6_mba6.h                |  30 ++++++++++
 include/fdt_support.h                       |  13 +++++
 include/power/pfuze100_pmic.h               |   2 +-
 26 files changed, 1480 insertions(+), 213 deletions(-)
 create mode 100644 board/solidrun/mx6cuboxi/Kconfig
 create mode 100644 board/solidrun/mx6cuboxi/MAINTAINERS
 create mode 100644 board/solidrun/mx6cuboxi/Makefile
 create mode 100644 board/solidrun/mx6cuboxi/README
 create mode 100644 board/solidrun/mx6cuboxi/mx6cuboxi.c
 create mode 100644 configs/mx6cuboxi_defconfig
 create mode 100644 include/configs/mx6cuboxi.h
 create mode 100644 include/configs/tqma6_mba6.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-04-13  6:36 Stefano Babic
@ 2015-04-13 14:05 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-04-13 14:05 UTC (permalink / raw)
  To: u-boot

On Mon, Apr 13, 2015 at 08:36:53AM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> pleas pull from u-boot-imx, thanks !
> 
> The following changes since commit 21866c34a1b4098a8868c9250daf01baf84c2397:
> 
>   at91sam9rlek_mmc_defconfig: Add CONFIG_ARCH_AT91=y (2015-03-20
> 10:47:38 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 3bf801a2176e3330a3ef696d974d0d198d99b7e9:
> 
>   ARM: mx5: add support for USB armory board (2015-04-09 09:14:12 +0200)
> 

Please note this adds a warning:
w+(mx53loco) ../arch/arm/imx-common/cpu.c:29:14: warning: 'get_reset_cause' defined but not used [-Wunused-function]

But looking over the commits, yes, it's best to not give misleading
information during startup, so..

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150413/c56680f3/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-04-13  6:36 Stefano Babic
  2015-04-13 14:05 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-04-13  6:36 UTC (permalink / raw)
  To: u-boot

Hi Tom,

pleas pull from u-boot-imx, thanks !

The following changes since commit 21866c34a1b4098a8868c9250daf01baf84c2397:

  at91sam9rlek_mmc_defconfig: Add CONFIG_ARCH_AT91=y (2015-03-20
10:47:38 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 3bf801a2176e3330a3ef696d974d0d198d99b7e9:

  ARM: mx5: add support for USB armory board (2015-04-09 09:14:12 +0200)

----------------------------------------------------------------
Andrej Rosano (2):
      ARM: mx5: move to a standard arch/board approach
      ARM: mx5: add support for USB armory board

Boris BREZILLON (3):
      ARM: mx6: move to a standard arch/board approach
      ARM: iMX: define an IMX_CONFIG Kconfig option
      board/seco: Add mx6q-uq7 basic board support

Fabio Estevam (1):
      mx53loco: Disable printing cpuinfo

Peng Fan (2):
      imx:mx6dlsabresd fix error detecting thermal
      imx:mx6slevk support reading temperature

Sebastian Siewior (1):
      watchdog/imx_watchdog: do not set WCR_WDW

Ulises Cardenas (1):
      Fix mxc_hab documenation for DEK blob generation

 arch/arm/Kconfig                         |  14 ++
 arch/arm/cpu/armv7/mx5/Kconfig           |  27 ++
 arch/arm/cpu/armv7/mx6/Kconfig           |  42 ++++
 arch/arm/imx-common/Kconfig              |   2 +
 board/freescale/mx53loco/mx53loco.c      |   1 -
 board/inversepath/usbarmory/Kconfig      |  15 ++
 board/inversepath/usbarmory/MAINTAINERS  |   6 +
 board/inversepath/usbarmory/Makefile     |  10 +
 board/inversepath/usbarmory/imximage.cfg |  82 ++++++
 board/inversepath/usbarmory/usbarmory.c  | 417
+++++++++++++++++++++++++++++++
 board/seco/Kconfig                       |  63 +++++
 board/seco/common/Makefile               |   2 +
 board/seco/common/mx6.c                  | 138 ++++++++++
 board/seco/common/mx6.h                  |   9 +
 board/seco/mx6quq7/MAINTAINERS           |   6 +
 board/seco/mx6quq7/Makefile              |   7 +
 board/seco/mx6quq7/mx6quq7-2g.cfg        | 173 +++++++++++++
 board/seco/mx6quq7/mx6quq7.c             | 162 ++++++++++++
 configs/mx6dlsabresd_defconfig           |   2 +
 configs/mx6slevk_defconfig               |   4 +
 configs/mx6slevk_spinor_defconfig        |   4 +
 configs/secomx6quq7_defconfig            |   7 +
 configs/usbarmory_defconfig              |   3 +
 doc/README.mxc_hab                       |   1 +
 drivers/watchdog/imx_watchdog.c          |   3 +-
 include/configs/mx53loco.h               |   2 -
 include/configs/mx6slevk.h               |   7 +
 include/configs/secomx6quq7.h            | 166 ++++++++++++
 include/configs/usbarmory.h              | 126 ++++++++++
 29 files changed, 1496 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/mx5/Kconfig
 create mode 100644 arch/arm/cpu/armv7/mx6/Kconfig
 create mode 100644 arch/arm/imx-common/Kconfig
 create mode 100644 board/inversepath/usbarmory/Kconfig
 create mode 100644 board/inversepath/usbarmory/MAINTAINERS
 create mode 100644 board/inversepath/usbarmory/Makefile
 create mode 100644 board/inversepath/usbarmory/imximage.cfg
 create mode 100644 board/inversepath/usbarmory/usbarmory.c
 create mode 100644 board/seco/Kconfig
 create mode 100644 board/seco/common/Makefile
 create mode 100644 board/seco/common/mx6.c
 create mode 100644 board/seco/common/mx6.h
 create mode 100644 board/seco/mx6quq7/MAINTAINERS
 create mode 100644 board/seco/mx6quq7/Makefile
 create mode 100644 board/seco/mx6quq7/mx6quq7-2g.cfg
 create mode 100644 board/seco/mx6quq7/mx6quq7.c
 create mode 100644 configs/secomx6quq7_defconfig
 create mode 100644 configs/usbarmory_defconfig
 create mode 100644 include/configs/secomx6quq7.h
 create mode 100644 include/configs/usbarmory.h


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-03-31 13:48 Stefano Babic
@ 2015-04-01  0:55 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-04-01  0:55 UTC (permalink / raw)
  To: u-boot

On Tue, Mar 31, 2015 at 03:48:34PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 21866c34a1b4098a8868c9250daf01baf84c2397:
> 
>   at91sam9rlek_mmc_defconfig: Add CONFIG_ARCH_AT91=y (2015-03-20
> 10:47:38 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 5cab874052614fb130cd9b16fc6a3d27cae0741e:
> 
>   watchdog/imx_watchdog: do not set WCR_WDW (2015-03-25 16:52:16 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150331/27227f08/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-03-31 13:48 Stefano Babic
  2015-04-01  0:55 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-03-31 13:48 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 21866c34a1b4098a8868c9250daf01baf84c2397:

  at91sam9rlek_mmc_defconfig: Add CONFIG_ARCH_AT91=y (2015-03-20
10:47:38 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 5cab874052614fb130cd9b16fc6a3d27cae0741e:

  watchdog/imx_watchdog: do not set WCR_WDW (2015-03-25 16:52:16 +0100)

----------------------------------------------------------------
Boris BREZILLON (3):
      ARM: mx6: move to a standard arch/board approach
      ARM: iMX: define an IMX_CONFIG Kconfig option
      board/seco: Add mx6q-uq7 basic board support

Peng Fan (2):
      imx:mx6dlsabresd fix error detecting thermal
      imx:mx6slevk support reading temperature

Sebastian Siewior (1):
      watchdog/imx_watchdog: do not set WCR_WDW

 arch/arm/Kconfig                  |   8 ++
 arch/arm/cpu/armv7/mx6/Kconfig    |  42 +++++++++
 arch/arm/imx-common/Kconfig       |   2 +
 board/seco/Kconfig                |  63 ++++++++++++++
 board/seco/common/Makefile        |   2 +
 board/seco/common/mx6.c           | 138 ++++++++++++++++++++++++++++++
 board/seco/common/mx6.h           |   9 ++
 board/seco/mx6quq7/MAINTAINERS    |   6 ++
 board/seco/mx6quq7/Makefile       |   7 ++
 board/seco/mx6quq7/mx6quq7-2g.cfg | 173
++++++++++++++++++++++++++++++++++++++
 board/seco/mx6quq7/mx6quq7.c      | 162 +++++++++++++++++++++++++++++++++++
 configs/mx6dlsabresd_defconfig    |   2 +
 configs/mx6slevk_defconfig        |   4 +
 configs/mx6slevk_spinor_defconfig |   4 +
 configs/secomx6quq7_defconfig     |   7 ++
 drivers/watchdog/imx_watchdog.c   |   3 +-
 include/configs/mx6slevk.h        |   7 ++
 include/configs/secomx6quq7.h     | 166
++++++++++++++++++++++++++++++++++++
 18 files changed, 803 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/mx6/Kconfig
 create mode 100644 arch/arm/imx-common/Kconfig
 create mode 100644 board/seco/Kconfig
 create mode 100644 board/seco/common/Makefile
 create mode 100644 board/seco/common/mx6.c
 create mode 100644 board/seco/common/mx6.h
 create mode 100644 board/seco/mx6quq7/MAINTAINERS
 create mode 100644 board/seco/mx6quq7/Makefile
 create mode 100644 board/seco/mx6quq7/mx6quq7-2g.cfg
 create mode 100644 board/seco/mx6quq7/mx6quq7.c
 create mode 100644 configs/secomx6quq7_defconfig
 create mode 100644 include/configs/secomx6quq7.h

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-03-18  9:23 Stefano Babic
@ 2015-03-19 13:11 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-03-19 13:11 UTC (permalink / raw)
  To: u-boot

On Wed, Mar 18, 2015 at 10:23:38AM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull (small fixes) from u-boot-imx, thanks !
> 
> The following changes since commit 32df39c741788e8637cffe6633d73594b26d70fb:
> 
>   mx5: fix get_reset_cause (2015-03-05 10:29:27 +0100)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to d5eb6dcf44f5c889dd80c81cf3b06385a27f8baf:
> 
>   mx6sabre: Do not enable UMS with SPL (2015-03-13 13:46:51 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150319/2a645167/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-03-18  9:23 Stefano Babic
  2015-03-19 13:11 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-03-18  9:23 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull (small fixes) from u-boot-imx, thanks !

The following changes since commit 32df39c741788e8637cffe6633d73594b26d70fb:

  mx5: fix get_reset_cause (2015-03-05 10:29:27 +0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to d5eb6dcf44f5c889dd80c81cf3b06385a27f8baf:

  mx6sabre: Do not enable UMS with SPL (2015-03-13 13:46:51 +0100)

----------------------------------------------------------------
Dirk Behme (1):
      mx6: soc: Switch to cold reset

Fabio Estevam (20):
      mx6sxsabresd: Use the default CONFIG_SYS_PBSIZE
      mx6slevk: Use the default CONFIG_SYS_PBSIZE
      mx6qarm2: Use the default CONFIG_SYS_PBSIZE
      mx53loco: Use the default CONFIG_SYS_PBSIZE
      mx51evk: Use the default CONFIG_SYS_PBSIZE
      mx35pdk: Use the default CONFIG_SYS_PBSIZE
      mx31pdk: Use the default CONFIG_SYS_PBSIZE
      mx25pdk: Use the default CONFIG_SYS_PBSIZE
      mxs: Use the default CONFIG_SYS_PBSIZE
      wandboard: Use the default CONFIG_SYS_PBSIZE
      hummingboard: Use the default CONFIG_SYS_PBSIZE
      nitrogen6x: Use the default CONFIG_SYS_PBSIZE
      warp: Use the default CONFIG_SYS_PBSIZE
      novena: Use the default CONFIG_SYS_PBSIZE
      warp: Add Device Firmware Upgrade support
      warp: Add a README file
      mx53ard: Use the standard U-boot prompt
      mx6_common: Do not select esdhc DDR mode for all boards
      warp: Select CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
      mx6sabre: Do not enable UMS with SPL

Peng Fan (1):
      imx:mx6 remove duplicated includes

Stefan Roese (1):
      common/board_f.c: Enable IMX watchdog in init_func_watchdog_init()

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot

maxin.john at enea.com (1):
      mx6sabre_common.h: remove deprecated mmc open/close

 Kconfig                                            |   18 +
 MAINTAINERS                                        |   14 +-
 Makefile                                           |    2 +-
 README                                             |   69 +
 arch/arm/Kconfig                                   |    7 +-
 arch/arm/Makefile                                  |    1 +
 arch/arm/cpu/armv7/Makefile                        |    1 -
 arch/arm/cpu/armv7/am33xx/board.c                  |   13 +-
 arch/arm/cpu/armv7/exynos/Makefile                 |    2 +
 arch/arm/cpu/armv7/exynos/common_setup.h           |   62 +
 arch/arm/cpu/armv7/exynos/exynos5_setup.h          |    3 +
 arch/arm/cpu/armv7/exynos/lowlevel_init.c          |  147 +++
 arch/arm/cpu/armv7/exynos/sec_boot.S               |  128 ++
 arch/arm/cpu/armv7/exynos/soc.c                    |   35 -
 arch/arm/cpu/armv7/lowlevel_init.S                 |   22 +-
 arch/arm/cpu/armv7/mx6/soc.c                       |   19 +-
 arch/arm/cpu/armv7/omap-common/hwinit-common.c     |    6 +-
 arch/arm/cpu/armv7/omap3/board.c                   |   10 +-
 arch/arm/cpu/armv7/rmobile/Kconfig                 |    6 +-
 arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c           | 1001 ++++++++++++++-
 arch/arm/cpu/armv7/rmobile/pfc-r8a7794.c           |  148 ++-
 arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c      |   28 -
 arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c |   29 -
 arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c    |   75 --
 arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c     |   28 -
 arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c |   29 -
 arch/arm/cpu/armv8/Makefile                        |    1 +
 arch/arm/cpu/armv8/zynqmp/Makefile                 |    9 +
 arch/arm/cpu/armv8/zynqmp/clk.c                    |   49 +
 arch/arm/cpu/armv8/zynqmp/cpu.c                    |   28 +
 arch/arm/dts/uniphier-ph1-ld4.dtsi                 |    8 +-
 arch/arm/dts/uniphier-ph1-pro4-ref.dts             |    5 +-
 arch/arm/dts/uniphier-ph1-pro4.dtsi                |   22 +-
 arch/arm/dts/uniphier-ph1-sld3.dtsi                |   10 +-
 arch/arm/dts/uniphier-ph1-sld8.dtsi                |    8 +-
 arch/arm/include/asm/arch-exynos/cpu.h             |    5 +
 arch/arm/include/asm/arch-exynos/system.h          |   88 ++
 arch/arm/include/asm/arch-rmobile/r8a7794-gpio.h   |  114 +-
 arch/arm/include/asm/arch-uniphier/ehci-uniphier.h |   33 -
 arch/arm/include/asm/arch-zynqmp/clk.h             |   13 +
 arch/arm/include/asm/arch-zynqmp/hardware.h        |   52 +
 arch/arm/include/asm/arch-zynqmp/sys_proto.h       |   15 +
 arch/arm/include/asm/armv7.h                       |   45 +
 arch/arm/include/asm/spl.h                         |    2 +
 arch/arm/lib/crt0.S                                |   13 +-
 arch/arm/lib/spl.c                                 |    4 +
 arch/arm/mach-tegra/Kconfig                        |    3 +
 .../{cpu/armv7/uniphier => mach-uniphier}/Kconfig  |    0
 .../{cpu/armv7/uniphier => mach-uniphier}/Makefile |    1 +
 .../uniphier => mach-uniphier}/board_common.c      |    2 +-
 .../board_early_init_f.c                           |    9 +-
 .../board_early_init_r.c                           |    2 +-
 .../uniphier => mach-uniphier}/board_late_init.c   |    0
 .../uniphier => mach-uniphier}/cache_uniphier.c    |    2 +-
 .../armv7/uniphier => mach-uniphier}/cmd_ddrphy.c  |    2 +-
 .../armv7/uniphier => mach-uniphier}/cmd_pinmon.c  |    4 +-
 .../armv7/uniphier => mach-uniphier}/cpu_info.c    |    2 +-
 .../uniphier => mach-uniphier}/ddrphy_training.c   |    2 +-
 .../armv7/uniphier => mach-uniphier}/dram_init.c   |    0
 .../include/mach}/arm-mpcore.h                     |    0
 .../include/mach}/bcu-regs.h                       |    0
 .../include/mach}/board.h                          |    0
 .../include/mach}/boot-device.h                    |    0
 .../include/mach}/ddrphy-regs.h                    |    0
 .../include/mach}/debug-uart.S                     |    0
 .../include/mach}/led.h                            |    0
 .../include/mach}/mio-regs.h                       |    0
 .../include/mach}/platdevice.h                     |    2 -
 .../include/mach}/sbc-regs.h                       |    0
 .../include/mach}/sc-regs.h                        |   29 +-
 .../include/mach}/sg-regs.h                        |  119 +-
 .../include/mach}/ssc-regs.h                       |    2 -
 .../include/mach}/umc-regs.h                       |    0
 .../uniphier => mach-uniphier}/init_page_table.S   |    0
 .../uniphier => mach-uniphier}/lowlevel_init.S     |   16 +-
 arch/arm/mach-uniphier/memconf.c                   |  104 ++
 .../ph1-pro4 => mach-uniphier/ph1-ld4}/Makefile    |    6 +-
 .../uniphier => mach-uniphier}/ph1-ld4/bcu_init.c  |    2 +-
 .../uniphier => mach-uniphier}/ph1-ld4/boot-mode.c |    0
 arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c       |   42 +
 .../ph1-ld4/ddrphy_init.c                          |    2 +-
 arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c |    1 +
 .../ph1-ld4/lowlevel_debug.S                       |    4 +-
 .../uniphier => mach-uniphier}/ph1-ld4/pinctrl.c   |    2 +-
 .../ph1-ld4/platdevice.c                           |   16 +-
 .../uniphier => mach-uniphier}/ph1-ld4/pll_init.c  |    4 +-
 .../ph1-ld4/pll_spectrum.c                         |    0
 arch/arm/mach-uniphier/ph1-ld4/sbc_init.c          |   50 +
 .../ph1-ld4/sbc_init_3cs.c}                        |   15 +-
 arch/arm/mach-uniphier/ph1-ld4/sg_init.c           |   19 +
 .../uniphier => mach-uniphier}/ph1-ld4/umc_init.c  |    4 +-
 .../ph1-ld4 => mach-uniphier/ph1-pro4}/Makefile    |    6 +-
 .../ph1-pro4/boot-mode.c                           |    6 +-
 arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c      |   57 +
 .../ph1-pro4/ddrphy_init.c                         |    2 +-
 .../ph1-pro4/early_clkrst_init.c}                  |   16 +-
 .../ph1-pro4/lowlevel_debug.S                      |    8 +-
 .../uniphier => mach-uniphier}/ph1-pro4/pinctrl.c  |    9 +-
 .../ph1-pro4/platdevice.c                          |   13 +-
 .../uniphier => mach-uniphier}/ph1-pro4/pll_init.c |   21 +-
 .../ph1-pro4/pll_spectrum.c                        |    2 +-
 arch/arm/mach-uniphier/ph1-pro4/sbc_init.c         |   43 +
 arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c     |   43 +
 arch/arm/mach-uniphier/ph1-pro4/sg_init.c          |   19 +
 .../uniphier => mach-uniphier}/ph1-pro4/umc_init.c |    4 +-
 .../uniphier => mach-uniphier}/ph1-sld8/Makefile   |    6 +-
 .../uniphier => mach-uniphier}/ph1-sld8/bcu_init.c |    0
 .../ph1-sld8/boot-mode.c                           |    0
 arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c      |    1 +
 .../ph1-sld8/ddrphy_init.c                         |    2 +-
 .../arm/mach-uniphier/ph1-sld8/early_clkrst_init.c |    1 +
 .../ph1-sld8/lowlevel_debug.S                      |    4 +-
 .../uniphier => mach-uniphier}/ph1-sld8/pinctrl.c  |    2 +-
 .../ph1-sld8/platdevice.c                          |   16 +-
 .../uniphier => mach-uniphier}/ph1-sld8/pll_init.c |    4 +-
 .../ph1-sld8/pll_spectrum.c                        |    0
 arch/arm/mach-uniphier/ph1-sld8/sbc_init.c         |    1 +
 .../ph1-sld8/sbc_init_3cs.c}                       |   32 +-
 .../uniphier => mach-uniphier}/ph1-sld8/sg_init.c  |    0
 .../uniphier => mach-uniphier}/ph1-sld8/umc_init.c |    4 +-
 .../uniphier => mach-uniphier}/print_misc_info.c   |    2 +-
 .../{cpu/armv7/uniphier => mach-uniphier}/reset.c  |    2 +-
 .../{cpu/armv7/uniphier => mach-uniphier}/smp.S    |    4 +-
 .../{cpu/armv7/uniphier => mach-uniphier}/spl.c    |   17 +-
 .../uniphier => mach-uniphier}/support_card.c      |    4 +-
 .../{cpu/armv7/uniphier => mach-uniphier}/timer.c  |    2 +-
 arch/sh/Kconfig                                    |    3 +
 arch/sh/lib/Makefile                               |   13 +-
 arch/sh/lib/{ashiftlt.S => ashlsi3.S}              |    0
 arch/sh/lib/ashrdi3.c                              |   27 +
 arch/sh/lib/{lshiftrt.S => lshrsi3.S}              |    0
 arch/sh/lib/udiv_qrnnd.S                           |   60 +
 arch/sh/lib/udivsi3.S                              |   66 +
 arch/sh/lib/udivsi3_i4i-Os.S                       |  128 ++
 arch/sh/lib/udivsi3_i4i.S                          |  644 ++++++++++
 board/balloon3/balloon3.c                          |    2 +-
 board/freescale/mpc837xerdb/mpc837xerdb.c          |    7 +-
 board/nvidia/seaboard/seaboard.c                   |    4 +-
 board/renesas/alt/alt.c                            |   69 +-
 board/renesas/gose/gose.c                          |   81 ++
 board/renesas/koelsch/koelsch.c                    |   86 ++
 board/renesas/lager/lager.c                        |   73 +-
 board/renesas/porter/Kconfig                       |   12 +
 board/renesas/porter/MAINTAINERS                   |    6 +
 board/renesas/porter/Makefile                      |   10 +
 board/renesas/porter/porter.c                      |  228 ++++
 board/renesas/porter/qos.c                         | 1312
++++++++++++++++++++
 board/renesas/porter/qos.h                         |   13 +
 board/renesas/silk/silk.c                          |   59 +-
 board/samsung/common/board.c                       |   13 +-
 board/samsung/common/misc.c                        |    6 +-
 board/samsung/odroid/odroid.c                      |   35 +-
 board/ti/am335x/MAINTAINERS                        |    7 +-
 board/ti/beagle/MAINTAINERS                        |    2 +-
 board/ti/evm/MAINTAINERS                           |   10 +-
 board/toradex/colibri_pxa270/colibri_pxa270.c      |    2 +-
 board/warp/README                                  |   56 +
 board/xilinx/zynqmp/Kconfig                        |   15 +
 board/xilinx/zynqmp/MAINTAINERS                    |    6 +
 board/xilinx/zynqmp/Makefile                       |    8 +
 board/xilinx/zynqmp/zynqmp.c                       |   90 ++
 common/board_f.c                                   |    3 +-
 common/cmd_fastboot.c                              |    6 +
 common/fb_mmc.c                                    |   60 +-
 common/spl/spl.c                                   |   35 +
 configs/alt_defconfig                              |    3 +
 configs/am335x_boneblack_defconfig                 |    2 +
 configs/am335x_boneblack_vboot_defconfig           |    2 +
 configs/am335x_evm_defconfig                       |    2 +
 configs/am335x_evm_nor_defconfig                   |    2 +
 configs/am335x_evm_spiboot_defconfig               |    2 +
 configs/am335x_evm_usbspl_defconfig                |    2 +
 configs/am335x_igep0033_defconfig                  |    2 +
 configs/gose_defconfig                             |    3 +
 configs/koelsch_defconfig                          |    3 +
 configs/lager_defconfig                            |    3 +
 configs/ph1_ld4_defconfig                          |   18 +-
 configs/ph1_pro4_defconfig                         |   20 +-
 configs/ph1_sld8_defconfig                         |   18 +-
 configs/porter_defconfig                           |    6 +
 configs/silk_defconfig                             |    3 +
 configs/xilinx_zynqmp_defconfig                    |   14 +
 doc/README.android-fastboot                        |    5 +-
 doc/README.uniphier                                |    3 +-
 doc/git-mailrc                                     |    2 +-
 drivers/dfu/dfu.c                                  |    3 +
 drivers/gpio/Makefile                              |    4 +
 drivers/gpio/tegra_gpio.c                          |   27 +-
 drivers/serial/ns16550.c                           |    2 +-
 drivers/serial/serial_sh.c                         |    2 +-
 drivers/serial/serial_sh.h                         |    5 +-
 drivers/serial/serial_uniphier.c                   |   64 +-
 drivers/usb/gadget/f_fastboot.c                    |   83 +-
 drivers/usb/host/Kconfig                           |   10 +-
 drivers/usb/host/Makefile                          |    1 +
 drivers/usb/host/ehci-uniphier.c                   |   25 +-
 drivers/usb/host/xhci-exynos5.c                    |    2 +-
 drivers/usb/host/xhci-uniphier.c                   |   85 ++
 drivers/usb/musb-new/omap2430.c                    |   16 +
 include/_exports.h                                 |    2 +
 include/configs/alt.h                              |    6 +-
 include/configs/am3517_crane.h                     |    1 -
 include/configs/am3517_evm.h                       |    1 -
 include/configs/atngw100mkii.h                     |    4 +
 include/configs/balloon3.h                         |   10 +-
 include/configs/bur_am335x_common.h                |    1 -
 include/configs/cm_t35.h                           |    1 -
 include/configs/colibri_pxa270.h                   |   77 +-
 include/configs/devkit8000.h                       |    2 -
 include/configs/exynos5420-common.h                |   16 +
 include/configs/flea3.h                            |    2 -
 include/configs/gose.h                             |    9 +-
 include/configs/hummingboard.h                     |    3 -
 include/configs/koelsch.h                          |   10 +-
 include/configs/lager.h                            |    6 +-
 include/configs/mx25pdk.h                          |    2 -
 include/configs/mx31pdk.h                          |    3 -
 include/configs/mx35pdk.h                          |    4 -
 include/configs/mx51evk.h                          |    2 -
 include/configs/mx53ard.h                          |    1 -
 include/configs/mx53loco.h                         |    2 -
 include/configs/mx6_common.h                       |    2 -
 include/configs/mx6qarm2.h                         |    2 -
 include/configs/mx6sabre_common.h                  |    6 +-
 include/configs/mx6slevk.h                         |    2 -
 include/configs/mx6sxsabresd.h                     |    2 -
 include/configs/mxs.h                              |    3 -
 include/configs/nitrogen6x.h                       |    3 -
 include/configs/novena.h                           |    3 -
 include/configs/odroid.h                           |    5 +-
 include/configs/odroid_xu3.h                       |   10 +-
 include/configs/omap3_evm_common.h                 |    1 -
 include/configs/palmld.h                           |    1 -
 include/configs/palmtc.h                           |    1 -
 include/configs/palmtreo680.h                      |    1 -
 include/configs/porter.h                           |  112 ++
 include/configs/rcar-gen2-common.h                 |    2 +
 include/configs/siemens-am33x-common.h             |    1 -
 include/configs/silk.h                             |    6 +-
 include/configs/snowball.h                         |    1 -
 include/configs/tam3517-common.h                   |    1 -
 include/configs/tao3530.h                          |    1 -
 include/configs/tegra-common.h                     |    6 -
 include/configs/ti814x_evm.h                       |    1 -
 include/configs/ti816x_evm.h                       |    2 -
 include/configs/ti_armv7_common.h                  |    5 +-
 include/configs/tricorder.h                        |    1 -
 include/configs/u8500_href.h                       |    1 -
 include/configs/uniphier.h                         |    3 +
 include/configs/vexpress_common.h                  |    1 -
 include/configs/vpac270.h                          |    3 +-
 include/configs/wandboard.h                        |    3 -
 include/configs/warp.h                             |   13 +-
 include/configs/woodburn_common.h                  |    2 -
 include/configs/xilinx_zynqmp.h                    |  131 ++
 include/configs/zipitz2.h                          |    1 -
 include/dfu.h                                      |    3 +
 include/exports.h                                  |    2 +
 include/fb_mmc.h                                   |    1 +
 include/fdtdec.h                                   |    1 +
 include/samsung/misc.h                             |    5 +-
 lib/fdtdec.c                                       |    1 +
 scripts/kconfig/confdata.c                         |    8 -
 263 files changed, 6549 insertions(+), 925 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/exynos/sec_boot.S
 delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c
 delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c
 delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c
 delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c
 delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c
 create mode 100644 arch/arm/cpu/armv8/zynqmp/Makefile
 create mode 100644 arch/arm/cpu/armv8/zynqmp/clk.c
 create mode 100644 arch/arm/cpu/armv8/zynqmp/cpu.c
 delete mode 100644 arch/arm/include/asm/arch-uniphier/ehci-uniphier.h
 create mode 100644 arch/arm/include/asm/arch-zynqmp/clk.h
 create mode 100644 arch/arm/include/asm/arch-zynqmp/hardware.h
 create mode 100644 arch/arm/include/asm/arch-zynqmp/sys_proto.h
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/Kconfig (100%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/Makefile (97%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/board_common.c (95%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/board_early_init_f.c (71%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/board_early_init_r.c (89%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/board_late_init.c
(100%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/cache_uniphier.c
(99%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/cmd_ddrphy.c (99%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/cmd_pinmon.c (90%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/cpu_info.c (97%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/ddrphy_training.c
(98%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/dram_init.c (100%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/arm-mpcore.h (100%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/bcu-regs.h (100%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/board.h (100%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/boot-device.h (100%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/ddrphy-regs.h (100%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/debug-uart.S (100%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/led.h (100%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/mio-regs.h (100%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/platdevice.h (93%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/sbc-regs.h (100%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/sc-regs.h (64%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/sg-regs.h (68%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/ssc-regs.h (94%)
 rename arch/arm/{include/asm/arch-uniphier =>
mach-uniphier/include/mach}/umc-regs.h (100%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/init_page_table.S
(100%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/lowlevel_init.S (94%)
 create mode 100644 arch/arm/mach-uniphier/memconf.c
 rename arch/arm/{cpu/armv7/uniphier/ph1-pro4 =>
mach-uniphier/ph1-ld4}/Makefile (50%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-ld4/bcu_init.c (96%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-ld4/boot-mode.c (100%)
 create mode 100644 arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-ld4/ddrphy_init.c (97%)
 create mode 100644 arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-ld4/lowlevel_debug.S (89%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/ph1-ld4/pinctrl.c
(98%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-ld4/platdevice.c (58%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-ld4/pll_init.c (98%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-ld4/pll_spectrum.c (100%)
 create mode 100644 arch/arm/mach-uniphier/ph1-ld4/sbc_init.c
 rename arch/arm/{cpu/armv7/uniphier/ph1-ld4/sbc_init.c =>
mach-uniphier/ph1-ld4/sbc_init_3cs.c} (83%)
 create mode 100644 arch/arm/mach-uniphier/ph1-ld4/sg_init.c
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-ld4/umc_init.c (98%)
 rename arch/arm/{cpu/armv7/uniphier/ph1-ld4 =>
mach-uniphier/ph1-pro4}/Makefile (51%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-pro4/boot-mode.c (96%)
 create mode 100644 arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-pro4/ddrphy_init.c (97%)
 rename arch/arm/{cpu/armv7/uniphier/ph1-ld4/clkrst_init.c =>
mach-uniphier/ph1-pro4/early_clkrst_init.c} (52%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-pro4/lowlevel_debug.S (82%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-pro4/pinctrl.c (85%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-pro4/platdevice.c (61%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-pro4/pll_init.c (91%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-pro4/pll_spectrum.c (89%)
 create mode 100644 arch/arm/mach-uniphier/ph1-pro4/sbc_init.c
 create mode 100644 arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c
 create mode 100644 arch/arm/mach-uniphier/ph1-pro4/sg_init.c
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-pro4/umc_init.c (98%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/ph1-sld8/Makefile
(50%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-sld8/bcu_init.c (100%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-sld8/boot-mode.c (100%)
 create mode 100644 arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-sld8/ddrphy_init.c (98%)
 create mode 100644 arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-sld8/lowlevel_debug.S (89%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-sld8/pinctrl.c (98%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-sld8/platdevice.c (58%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-sld8/pll_init.c (98%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-sld8/pll_spectrum.c (100%)
 create mode 100644 arch/arm/mach-uniphier/ph1-sld8/sbc_init.c
 rename arch/arm/{cpu/armv7/uniphier/ph1-sld8/sbc_init.c =>
mach-uniphier/ph1-sld8/sbc_init_3cs.c} (63%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-sld8/sg_init.c (100%)
 rename arch/arm/{cpu/armv7/uniphier =>
mach-uniphier}/ph1-sld8/umc_init.c (98%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/print_misc_info.c
(88%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/reset.c (94%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/smp.S (95%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/spl.c (81%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/support_card.c (98%)
 rename arch/arm/{cpu/armv7/uniphier => mach-uniphier}/timer.c (96%)
 rename arch/sh/lib/{ashiftlt.S => ashlsi3.S} (100%)
 create mode 100644 arch/sh/lib/ashrdi3.c
 rename arch/sh/lib/{lshiftrt.S => lshrsi3.S} (100%)
 create mode 100644 arch/sh/lib/udiv_qrnnd.S
 create mode 100644 arch/sh/lib/udivsi3.S
 create mode 100644 arch/sh/lib/udivsi3_i4i-Os.S
 create mode 100644 arch/sh/lib/udivsi3_i4i.S
 create mode 100644 board/renesas/porter/Kconfig
 create mode 100644 board/renesas/porter/MAINTAINERS
 create mode 100644 board/renesas/porter/Makefile
 create mode 100644 board/renesas/porter/porter.c
 create mode 100644 board/renesas/porter/qos.c
 create mode 100644 board/renesas/porter/qos.h
 create mode 100644 board/warp/README
 create mode 100644 board/xilinx/zynqmp/Kconfig
 create mode 100644 board/xilinx/zynqmp/MAINTAINERS
 create mode 100644 board/xilinx/zynqmp/Makefile
 create mode 100644 board/xilinx/zynqmp/zynqmp.c
 create mode 100644 configs/porter_defconfig
 create mode 100644 configs/xilinx_zynqmp_defconfig
 create mode 100644 drivers/usb/host/xhci-uniphier.c
 create mode 100644 include/configs/porter.h
 create mode 100644 include/configs/xilinx_zynqmp.h


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-03-05  9:45 Stefano Babic
@ 2015-03-05 14:00 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-03-05 14:00 UTC (permalink / raw)
  To: u-boot

On Thu, Mar 05, 2015 at 10:45:43AM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> 
> The following changes since commit 1606b34aa50804227806971dbb6b82ea0bf81f55:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq
> (2015-02-25 18:14:18 -0500)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 32df39c741788e8637cffe6633d73594b26d70fb:
> 
>   mx5: fix get_reset_cause (2015-03-05 10:29:27 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150305/a95f8d97/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-03-05  9:45 Stefano Babic
  2015-03-05 14:00 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-03-05  9:45 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !


The following changes since commit 1606b34aa50804227806971dbb6b82ea0bf81f55:

  Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq
(2015-02-25 18:14:18 -0500)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 32df39c741788e8637cffe6633d73594b26d70fb:

  mx5: fix get_reset_cause (2015-03-05 10:29:27 +0100)

----------------------------------------------------------------
Christian Gmeiner (2):
      cmd_eeprom: make it possible to define the used i2c bus
      ot1200: add eeprom command to non-SPL build

Eric Nelson (2):
      ARM: i.MX: provide access to reset cause through get_imx_reset_cause()
      nitrogen6x: set environment variable reset_cause

Fabio Estevam (9):
      mc34704: Add the definition of ONOFFA bit
      mx25pdk: Turn on the LCD supply
      mx31: Fix boot hang by avoiding vector relocation
      mx35: Fix boot hang by avoiding vector relocation
      mx6sabre: Enable User Mass Storage
      mx6sabre: Select CMD_EXT4 options
      mx6slevk: Provide a proper pad configuration for OTG1_ID pin
      warp: Add USB Mass Storage support
      warp: Select BOUNCE_BUFFER and CMD_EXT options

Otavio Salvador (4):
      mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V
      mmc: fsl_esdhc: Add support to force VSELECT set
      imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use
      warp: Add initial WaRP Board support

Peng Fan (7):
      pmic:pfuze implement pmic_mode_init
      imx:mx6 set normal APS and standby PFM mode
      ARM: imx6: disable bandgap self-bias after boot
      ARM: imx6 Add WDOG3 for i.MX6SX
      imx:mx6sl add I2c pad settings
      imx:mx6slevk add pmic and i2c configuration
      imx:mx6slevk implement power init board

Raul Cardenas (1):
      imx6: Added DEK blob generator command

Soeren Moch (2):
      board: tbs2910: Gate clock when switching async clock muxes
      board: tbs2910: Enable USB Mass Storage support

Stefano Babic (4):
      pmic: fix missing SWITCH_SIZE
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot
      mx5: fix get_reset_cause

 README                                        |   3 ++
 arch/arm/Kconfig                              |   5 ++
 arch/arm/cpu/arm1136/mx31/Makefile            |   4 ++
 arch/arm/cpu/arm1136/mx31/relocate.S          |  23 ++++++++
 arch/arm/cpu/arm1136/mx35/Makefile            |   4 ++
 arch/arm/cpu/arm1136/mx35/relocate.S          |  23 ++++++++
 arch/arm/cpu/armv7/mx6/soc.c                  |  29 ++++++++++
 arch/arm/imx-common/Makefile                  |   1 +
 arch/arm/imx-common/cmd_dek.c                 |  91
+++++++++++++++++++++++++++++++
 arch/arm/imx-common/cpu.c                     |  10 +++-
 arch/arm/imx-common/timer.c                   |  17 ++++++
 arch/arm/include/asm/arch-imx/cpu.h           |   2 +
 arch/arm/include/asm/arch-mx5/sys_proto.h     |   1 -
 arch/arm/include/asm/arch-mx6/crm_regs.h      |   2 +
 arch/arm/include/asm/arch-mx6/imx-regs.h      |   4 ++
 arch/arm/include/asm/arch-mx6/mx6sl_pins.h    |  10 ++++
 board/boundary/nitrogen6x/nitrogen6x.c        |   1 +
 board/freescale/common/pfuze.c                |  38 +++++++++++++
 board/freescale/common/pfuze.h                |   1 +
 board/freescale/mx25pdk/mx25pdk.c             |   4 +-
 board/freescale/mx53loco/mx53loco.c           |  16 ------
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |   6 +++
 board/freescale/mx6sabresd/mx6sabresd.c       |   6 ++-
 board/freescale/mx6slevk/mx6slevk.c           |  49 ++++++++++++++++-
 board/freescale/mx6sxsabresd/mx6sxsabresd.c   |   6 ++-
 board/tbs/tbs2910/tbs2910.c                   |  28 +++++-----
 board/warp/Kconfig                            |  12 +++++
 board/warp/MAINTAINERS                        |   6 +++
 board/warp/Makefile                           |   8 +++
 board/warp/warp.c                             | 119
+++++++++++++++++++++++++++++++++++++++++
 common/cmd_eeprom.c                           |   6 +++
 configs/warp_defconfig                        |   3 ++
 doc/README.fsl-esdhc                          |   1 +
 doc/README.mxc_hab                            |  48 +++++++++++++++++
 drivers/crypto/fsl/Makefile                   |   2 +-
 drivers/crypto/fsl/desc.h                     |  15 ++++++
 drivers/crypto/fsl/fsl_blob.c                 |  52 ++++++++++++++++++
 drivers/crypto/fsl/jobdesc.c                  | 149
++++++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/crypto/fsl/jobdesc.h                  |  14 +++++
 drivers/crypto/fsl/jr.c                       |  31 +++++++++--
 drivers/mmc/fsl_esdhc.c                       |  33 +++++++++---
 include/configs/mx53loco.h                    |   2 +
 include/configs/mx6sabre_common.h             |  16 ++++++
 include/configs/mx6slevk.h                    |  12 +++++
 include/configs/ot1200.h                      |  10 ++++
 include/configs/tbs2910.h                     |  13 +++++
 include/configs/warp.h                        | 228
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/fsl_esdhc.h                           |   2 +
 include/fsl_sec.h                             |  78
+++++++++++++++++++++++++--
 include/mc34704.h                             |   1 +
 include/mmc.h                                 |   1 +
 include/power/pfuze100_pmic.h                 |   2 +
 52 files changed, 1196 insertions(+), 52 deletions(-)
 create mode 100644 arch/arm/cpu/arm1136/mx31/relocate.S
 create mode 100644 arch/arm/cpu/arm1136/mx35/relocate.S
 create mode 100644 arch/arm/imx-common/cmd_dek.c
 create mode 100644 board/warp/Kconfig
 create mode 100644 board/warp/MAINTAINERS
 create mode 100644 board/warp/Makefile
 create mode 100644 board/warp/warp.c
 create mode 100644 configs/warp_defconfig
 create mode 100644 include/configs/warp.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2015-02-10 12:19 Stefano Babic
@ 2015-02-10 20:09 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-02-10 20:09 UTC (permalink / raw)
  To: u-boot

On Tue, Feb 10, 2015 at 01:19:46PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit ab77f24119e80257de4ab017b877f92f96980562:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-ti (2015-01-16
> 10:25:01 -0500)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to aee0013e53b339a573e2a8d66062fe87765aa3bd:
> 
>   mx53loco: Fix boot hang during reboot stress test (2015-02-10 12:48:50
> +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150210/e9c13533/attachment.sig>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2015-02-10 12:19 Stefano Babic
  2015-02-10 20:09 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2015-02-10 12:19 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit ab77f24119e80257de4ab017b877f92f96980562:

  Merge branch 'master' of git://git.denx.de/u-boot-ti (2015-01-16
10:25:01 -0500)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to aee0013e53b339a573e2a8d66062fe87765aa3bd:

  mx53loco: Fix boot hang during reboot stress test (2015-02-10 12:48:50
+0100)

----------------------------------------------------------------
Alexandre Coffignal (1):
      mxsboot : Support of 224-bytes OOB area length

Christian Gmeiner (7):
      ot1200: select SUPPORT_SPL
      ot1200: make use of imx_ddr_size(..)
      ot1200: move ccgr and gpr init to c functions
      ot1200: enable spi clock directly in ccgr_init(..)
      ot1200: add SPL configuration
      ot1200: add basic SPL support
      ot1200: add ot1200_spl_defconfig file

Fabio Estevam (2):
      mx6sxsabresd: Remove unneeded board_late_init()
      mx53loco: Fix boot hang during reboot stress test

Graeme Russ (3):
      arm: mxs: Add debug outputs and comments to mxs SPL source files
      arm: mxs: Enable booting of mx28 without battery
      arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode

Heiko Schocher (1):
      arm, imx6, aristainetos: board updates

Nikita Kiryanov (14):
      arm: mx6: cm-fx6: expand boot sequence
      arm: mx6: cm-fx6: change dtb node for ethaddr
      compulab: eeprom: allow reading mac address from multiple eeproms
      arm: mx6: cm-fx6: pass 2nd nic mac addr to Linux
      arm: mx6: cm-fx6: increase size of malloc area
      arm: mx6: cm-fx6: add hdmi console support
      arm: mx6: cm-fx6: display compulab logo
      arm: mx6: cm-fx6: add support for usb keyboard
      compulab: splash: use errno values
      compulab: splash: refactor splash.c
      compulab: splash: support multiple splash sources
      compulab: splash: support loading splash from sf
      arm: mx6: cm-fx6: add splash screen support
      common: convert compulab splash load code to common code

Otavio Salvador (1):
      wandboard: Use 32bit color depth for Fusion LCD

Peng Fan (9):
      imx:mx6sxsabresd add spl config file
      imx:mx6sxsabresd select SUPPORT_SPL
      imx:mx6sxsabresd spl support in header file
      imx:mx6sx add dram io configure for mx6sx
      imx:mx6 add mx6sx in imx spl header file
      imx:mx6sxsabresd board spl support
      imx:mx6 update fuse_bank0_regs
      pmic:pfuze add macro for setting voltage
      pmic:pfuz100 add switch mode and more registers

Stefan Roese (1):
      arm: mx6: Add Barco platinum-picon and platinum-titanium

Stefano Babic (1):
      mx6: fix warning in platinum board

Ye.Li (4):
      imx: mx6: Change ENV offset to 512K bytes for larger u-boot image
      imx: mx6qsabreauto: Change to use common GPMI IO clock function
      imx: imximage: Add QuadSPI boot support
      imx: mx6: Fixed AIPS3 base address issue

 arch/arm/Kconfig                              |  13 ++++
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c         |   6 ++
 arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c   |  13 +++-
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c     |  18 ++++++
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c   | 110
++++++++++++++++++++++++++++++++--
 arch/arm/cpu/armv7/mx6/ddr.c                  |  96
+++++++++++++++++++++++++-----
 arch/arm/cpu/armv7/mx6/soc.c                  |   2 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h      |  16 +++--
 arch/arm/include/asm/arch-mx6/mx6-ddr.h       |  46 ++++++++++++++
 arch/arm/include/asm/arch-mxs/sys_proto.h     |  17 ++++++
 board/aristainetos/aristainetos.c             |   8 +--
 board/bachmann/ot1200/Makefile                |   4 ++
 board/bachmann/ot1200/mx6q_4x_mt41j128.cfg    |  14 -----
 board/bachmann/ot1200/ot1200.c                |  34 +++++++++--
 board/bachmann/ot1200/ot1200_spl.c            | 162
++++++++++++++++++++++++++++++++++++++++++++++++++
 board/barco/platinum/Kconfig                  |  37 ++++++++++++
 board/barco/platinum/MAINTAINERS              |   7 +++
 board/barco/platinum/Makefile                 |  14 +++++
 board/barco/platinum/platinum.c               | 217
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/barco/platinum/platinum.h               |  89
++++++++++++++++++++++++++++
 board/barco/platinum/platinum_picon.c         | 244
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/barco/platinum/platinum_titanium.c      | 209
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/barco/platinum/spl_picon.c              | 182
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/barco/platinum/spl_titanium.c           | 185
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/compulab/cm_fx6/cm_fx6.c                |  95
++++++++++++++++++++++++++---
 board/compulab/cm_t335/cm_t335.c              |   2 +-
 board/compulab/cm_t35/cm_t35.c                |  14 ++++-
 board/compulab/cm_t3517/cm_t3517.c            |   2 +-
 board/compulab/cm_t54/cm_t54.c                |   2 +-
 board/compulab/common/Makefile                |   1 -
 board/compulab/common/common.h                |   9 ---
 board/compulab/common/eeprom.c                |  20 ++++---
 board/compulab/common/eeprom.h                |   4 +-
 board/compulab/common/splash.c                |  72 ----------------------
 board/freescale/mx53loco/imximage.cfg         |   3 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |  25 +-------
 board/freescale/mx6sxsabresd/MAINTAINERS      |   1 +
 board/freescale/mx6sxsabresd/mx6sxsabresd.c   | 171
++++++++++++++++++++++++++++++++++++++++++++++++++--
 common/Makefile                               |   1 +
 common/splash_source.c                        | 176
++++++++++++++++++++++++++++++++++++++++++++++++++++++
 configs/mx6sxsabresd_spl_defconfig            |   4 ++
 configs/ot1200_spl_defconfig                  |   4 ++
 configs/platinum_picon_defconfig              |   4 ++
 configs/platinum_titanium_defconfig           |   4 ++
 doc/README.splashprepare                      |  13 ++++
 include/configs/aristainetos.h                | 167
++++++++++++++++++++++++++++-----------------------
 include/configs/cm_fx6.h                      | 158
++++++++++++++++++++++++++++---------------------
 include/configs/cm_t35.h                      |   1 +
 include/configs/imx6_spl.h                    |   8 +++
 include/configs/mx6slevk.h                    |   2 +-
 include/configs/mx6sxsabresd.h                |   9 ++-
 include/configs/ot1200.h                      |  11 +++-
 include/configs/platinum.h                    | 319
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/configs/platinum_picon.h              |  31 ++++++++++
 include/configs/platinum_titanium.h           |  38 ++++++++++++
 include/configs/wandboard.h                   |   2 +-
 include/power/pfuze100_pmic.h                 |  55 +++++++++++++++++
 include/splash.h                              |  11 ++++
 tools/imximage.c                              |   2 +
 tools/imximage.h                              |   2 +
 tools/logos/compulab.bmp                      | Bin 0 -> 31810 bytes
 tools/mxsboot.c                               |   6 ++
 62 files changed, 2863 insertions(+), 329 deletions(-)
 create mode 100644 board/bachmann/ot1200/ot1200_spl.c
 create mode 100644 board/barco/platinum/Kconfig
 create mode 100644 board/barco/platinum/MAINTAINERS
 create mode 100644 board/barco/platinum/Makefile
 create mode 100644 board/barco/platinum/platinum.c
 create mode 100644 board/barco/platinum/platinum.h
 create mode 100644 board/barco/platinum/platinum_picon.c
 create mode 100644 board/barco/platinum/platinum_titanium.c
 create mode 100644 board/barco/platinum/spl_picon.c
 create mode 100644 board/barco/platinum/spl_titanium.c
 delete mode 100644 board/compulab/common/splash.c
 create mode 100644 common/splash_source.c
 create mode 100644 configs/mx6sxsabresd_spl_defconfig
 create mode 100644 configs/ot1200_spl_defconfig
 create mode 100644 configs/platinum_picon_defconfig
 create mode 100644 configs/platinum_titanium_defconfig
 create mode 100644 include/configs/platinum.h
 create mode 100644 include/configs/platinum_picon.h
 create mode 100644 include/configs/platinum_titanium.h
 create mode 100644 tools/logos/compulab.bmp


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-12-30 16:55 Stefano Babic
@ 2015-01-01 14:55 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2015-01-01 14:55 UTC (permalink / raw)
  To: u-boot

On Tue, Dec 30, 2014 at 05:55:37PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> some minor fixes from i.MX side - please pull from u-boot-imx, thanks !
> 
> The following changes since commit 125738e819a3b9d15210794b3dcef9f4d9bcf866:
> 
>   Prepare v2015.01-rc4 (2014-12-29 21:22:38 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 87e47e905887b91c0505495cc6bbab70ba266d51:
> 
>   mx6slevk: Remove get_board_rev() (2014-12-30 14:10:39 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150101/f5743e4c/attachment.pgp>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2014-12-30 16:55 Stefano Babic
  2015-01-01 14:55 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-12-30 16:55 UTC (permalink / raw)
  To: u-boot

Hi Tom,

some minor fixes from i.MX side - please pull from u-boot-imx, thanks !

The following changes since commit 125738e819a3b9d15210794b3dcef9f4d9bcf866:

  Prepare v2015.01-rc4 (2014-12-29 21:22:38 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 87e47e905887b91c0505495cc6bbab70ba266d51:

  mx6slevk: Remove get_board_rev() (2014-12-30 14:10:39 +0100)

----------------------------------------------------------------
Christian Gmeiner (2):
      ot1200: add fsuuid command
      ot1200: enable support for USB_STORAGE

Fabio Estevam (2):
      mx51evk: Fix MX51EVK_USB_CLK_EN_B definition
      mx6slevk: Remove get_board_rev()

Iain Paton (2):
      embestmx6boards: convert to use config_distro_defaults.h
      embestmx6boards: convert to use config_distro_bootcmd.h

Jan Luebbe (1):
      arm: mxs: olinuxino: move DRAM config tuning to SPL

Marek Vasut (8):
      imx: i2c: Zap unnecessary malloc() calls
      arm: mx6: gw_ventana: Define CONFIG_SYS_MALLOC_F_LEN
      arm: mx6: novena: Define CONFIG_SYS_MALLOC_F_LEN
      arm: mx6: novena: Minor coding style fix
      arm: mx6: novena: Minor config file fix
      arm: mx6: novena: Pull GPIO definitions into header
      arm: mx6: novena: Pull video handling into separate file
      arm: mx6: novena: Add proper LVDS display support

Peng Fan (3):
      imx:mx6 fix return value of mxc_get_clock
      imx:mx6sabresd add board level support for usb
      imx:mx6qarm2 add board level support for usb

Pierre Aubert (1):
      imx SPL: enable boot from eMMC boot partitions.

Stefan Roese (1):
      arm: mx6: gw_ventana: Change clock init to enable NAND related clocks

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot

 arch/arm/cpu/armv7/mx6/clock.c               |   3 +-
 arch/arm/imx-common/i2c-mxv7.c               |  24 +-
 arch/arm/imx-common/spl.c                    |   4 +-
 board/freescale/mx51evk/mx51evk.c            |   2 +-
 board/freescale/mx6qarm2/mx6qarm2.c          |  42 +++
 board/freescale/mx6sabresd/mx6sabresd.c      |  68 ++++
 board/freescale/mx6slevk/mx6slevk.c          |   5 -
 board/gateworks/gw_ventana/gw_ventana_spl.c  |   2 +-
 board/kosagi/novena/Makefile                 |   1 +
 board/kosagi/novena/novena.c                 |  93 +-----
 board/kosagi/novena/novena.h                 |  33 ++
 board/kosagi/novena/novena_spl.c             |  17 +-
 board/kosagi/novena/video.c                  | 456
+++++++++++++++++++++++++++
 board/olimex/mx23_olinuxino/mx23_olinuxino.c |  30 --
 board/olimex/mx23_olinuxino/spl_boot.c       |  30 ++
 include/configs/embestmx6boards.h            | 189 +++--------
 include/configs/gw_ventana.h                 |   1 +
 include/configs/mx6qarm2.h                   |  14 +
 include/configs/mx6sabresd.h                 |  14 +
 include/configs/novena.h                     |   3 +-
 include/configs/ot1200.h                     |   3 +
 21 files changed, 742 insertions(+), 292 deletions(-)
 create mode 100644 board/kosagi/novena/novena.h
 create mode 100644 board/kosagi/novena/video.c


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-12-10  9:36 Stefano Babic
@ 2014-12-10 21:40 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2014-12-10 21:40 UTC (permalink / raw)
  To: u-boot

On Wed, Dec 10, 2014 at 10:36:38AM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 2a82ec77d27ef5f860a107c4b764643a655dceeb:
> 
>   Prepare v2015.01-rc2 (2014-11-24 17:08:47 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 9e89a64fbd0ddfde17741b38cc95fbdc02679d86:
> 
>   arm: vf610: improve evaluation of reset source (2014-12-01 10:20:22 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141210/20e557d3/attachment.pgp>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2014-12-10  9:36 Stefano Babic
  2014-12-10 21:40 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-12-10  9:36 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 2a82ec77d27ef5f860a107c4b764643a655dceeb:

  Prepare v2015.01-rc2 (2014-11-24 17:08:47 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 9e89a64fbd0ddfde17741b38cc95fbdc02679d86:

  arm: vf610: improve evaluation of reset source (2014-12-01 10:20:22 +0100)

----------------------------------------------------------------
Fabio Estevam (5):
      thermal: imx_thermal: Do not display calibration data
      mx6sxsabresd: Add thermal support
      mxc_ocotp: Do not disable the OCOTP clock after every access
      config_fallbacks: Add a default entry for CONFIG_SYS_PBSIZE
      mx6sabre_common: Use the default CONFIG_SYS_PBSIZE

Guillaume GARDET (1):
      imx: mx53loco: Add raw initrd support

Hector Palacios (3):
      mxs_ocotp: prevent error path from returning success
      mxs_ocotp: check for errors from the OTP controller after writing
      mxs_ocotp: clear the error flag before initiating write operation

Soeren Moch (3):
      tbs2910: fix Kconfig
      sata: fix reset_sata for dwc_ahsata
      tbs2910: fix lost characters on serial input

Stefan Agner (1):
      arm: vf610: improve evaluation of reset source

Stefan Roese (1):
      arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)

 arch/arm/Kconfig                            |  1 +
 arch/arm/cpu/armv7/mx6/clock.c              |  2 +-
 arch/arm/cpu/armv7/vf610/generic.c          | 21 +++++++++++----------
 arch/arm/imx-common/cpu.c                   |  3 +++
 arch/arm/include/asm/arch-mx6/clock.h       |  8 ++++----
 arch/arm/include/asm/arch-vf610/imx-regs.h  |  8 ++++++++
 board/aristainetos/aristainetos.c           |  2 +-
 board/freescale/mx6slevk/mx6slevk.c         |  2 +-
 board/freescale/mx6sxsabresd/mx6sxsabresd.c |  2 +-
 board/solidrun/hummingboard/hummingboard.c  |  2 +-
 board/tbs/tbs2910/Kconfig                   |  8 --------
 drivers/block/dwc_ahsata.c                  | 14 ++++++++------
 drivers/misc/mxc_ocotp.c                    |  2 --
 drivers/misc/mxs_ocotp.c                    | 14 ++++++++++----
 drivers/thermal/imx_thermal.c               |  2 --
 include/config_fallbacks.h                  |  4 ++++
 include/configs/mx53loco.h                  |  1 +
 include/configs/mx6sabre_common.h           |  3 ---
 include/configs/mx6sxsabresd.h              | 10 ++++++++++
 include/configs/tbs2910.h                   |  2 +-
 20 files changed, 66 insertions(+), 45 deletions(-)

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-11-24 11:18 Stefano Babic
@ 2014-11-24 22:13 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2014-11-24 22:13 UTC (permalink / raw)
  To: u-boot

On Mon, Nov 24, 2014 at 12:18:08PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit f196044dfd64745a163773c6c746f9e149ace127:
> 
>   ARM: atmel: add sama5d4 xplained ultra board support (2014-11-17
> 08:47:18 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to e7eb277dced570f177d75d56f40219d9dc599ed1:
> 
>   mx6boards: Fix error handling in board_mmc_init() (2014-11-24 12:10:18
> +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141124/53207c15/attachment.pgp>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2014-11-24 11:18 Stefano Babic
  2014-11-24 22:13 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-11-24 11:18 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit f196044dfd64745a163773c6c746f9e149ace127:

  ARM: atmel: add sama5d4 xplained ultra board support (2014-11-17
08:47:18 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to e7eb277dced570f177d75d56f40219d9dc599ed1:

  mx6boards: Fix error handling in board_mmc_init() (2014-11-24 12:10:18
+0100)

----------------------------------------------------------------
Albert ARIBAUD (3):
      cosmetic: arm: fix whitespace in arch/arm/lib/relocate.S
      imx: fix exception vectors relocation in imx27
      tools/msximage.c: fix warning about nptr possibly uninitialized

Alexey Ignatov (1):
      ARM: mxs: tools: Add support for boot progress display flag

Fabio Estevam (23):
      mx6sabresd: Move the DCD settings to spl code
      gw_ventana: Move the DCD settings to spl code
      novena: Move the DCD settings to spl code
      mx6: Use a common SPL configuration file
      imx: consolidate set_chipselect_size function
      mx6: add weim registers
      mx6qsabreauto: Add parallel NOR flash support
      wandboard: Fix error handling in board_mmc_init()
      mx53loco: Fix error handling in board_mmc_init()
      mx6sabresd: State that only mx6q is supported in SPL
      mx6slevk: Simplify the return value of setup_fec()
      mx6sxsabresd: Simplify the return value of setup_fec()
      mx6sabresd: Add mx6sabresd_spl_defconfig to MAINTAINERS entry
      mx6sabresd: Access SRC_SBMR1 register via structure
      mx51evk: Fix error handling in board_mmc_init()
      mx6qarm2: Fix error handling in board_mmc_init()
      mx53smd: Fix error handling in board_mmc_init()
      mx53evk: Fix error handling in board_mmc_init()
      mx53ard: Fix error handling in board_mmc_init()
      gw_ventana: Use the generic spl_sd.cfg
      ot1200: Fix error handling in board_mmc_init()
      nitrogen6x: Fix error handling in board_mmc_init()
      mx6boards: Fix error handling in board_mmc_init()

Markus Niebel (4):
      tqma6: (cosmetic) remove CONFIG_FLASH_SECTOR_SIZE
      tqma6: add missing include
      tqma6: add warning on failed setup_i2c
      tqma6: use imx_ddr_size

Nikita Kiryanov (5):
      arm: mx6: introduce disable_sata_clock
      sata: implement reset_sata for dwc_ahsata
      cmd_sata: implement sata stop command
      arm: mx6: cm_fx6: implement board specific sata stop
      arm: imx: stop sata on boot

Nitin Garg (1):
      mx6: clock: Add thermal clock enable function

Peng Fan (1):
      imx:mx6sxsabresd fix pfuz probe failed

Soeren Moch (1):
      tbs2910: Fix error handling in board_mmc_init()

Ye.Li (11):
      imx: mx6slevk: Change default mmcdev to USDHC2 device
      mmc: fsl_esdhc: Update esdhc driver for iMX6SX
      imx: mx6sxsabresd: Add board support for USDHC2 and USDHC3
      power: pfuze100: Update definitions for buck regulators
      imx: mx6sabre common: Factorize the Pfuze init function
      imx: mx6sabresd: Use the pfuze common init function
      imx: mx6sxsabresd: Use the pfuze common init function
      imx: imx6q/dlsabreauto: Add PMIC Pfuze100 support
      DM: thermal: Add imx thermal DM driver
      mx6: thermal: Check cpu temperature via thermal sensor
      mx6: mx6sabre common: Enable i.MX thermal DM driver

 arch/arm/cpu/arm926ejs/mx27/Makefile    |   4 +
 arch/arm/cpu/arm926ejs/mx27/relocate.S  |  51 ++++
 .../arm926ejs/mxs/mxsimage-signed.cfg   |   1 +
 .../cpu/arm926ejs/mxs/mxsimage.mx23.cfg |   1 +
 .../cpu/arm926ejs/mxs/mxsimage.mx28.cfg |   1 +
 arch/arm/cpu/armv7/mx5/soc.c            |  31 ---
 arch/arm/cpu/armv7/mx6/clock.c          |  38 +++
 arch/arm/cpu/armv7/mx6/soc.c            |  15 ++
 arch/arm/cpu/armv7/omap-common/sata.c   |   5 +
 arch/arm/imx-common/cpu.c               |  60 ++++-
 .../arm/imx-common/spl_sd.cfg           |   2 +-
 arch/arm/include/asm/arch-imx/cpu.h     |   5 +
 .../arm/include/asm/arch-mx5/imx-regs.h |  12 +-
 arch/arm/include/asm/arch-mx6/clock.h   |   2 +
 .../arm/include/asm/arch-mx6/imx-regs.h |  37 +++
 .../include/asm/arch-mx6/sys_proto.h    |   1 +
 arch/arm/lib/crt0.S                     |   5 +
 arch/arm/lib/relocate.S                 |  73 +++---
 board/bachmann/ot1200/ot1200.c          |  10 +-
 board/boundary/nitrogen6x/nitrogen6x.c  |  10 +-
 board/compulab/cm_fx6/cm_fx6.c          |  12 +-
 board/embest/mx6boards/mx6boards.c      |  10 +-
 board/freescale/common/Makefile         |   1 +
 board/freescale/common/pfuze.c          |  54 ++++
 board/freescale/common/pfuze.h          |  12 +
 board/freescale/mx51evk/mx51evk.c       |  10 +-
 board/freescale/mx53ard/mx53ard.c       |  10 +-
 board/freescale/mx53evk/mx53evk.c       |  10 +-
 board/freescale/mx53loco/mx53loco.c     |  10 +-
 board/freescale/mx53smd/mx53smd.c       |  10 +-
 board/freescale/mx6qarm2/mx6qarm2.c     |  10 +-
 .../mx6qsabreauto/mx6qsabreauto.c       |  95 ++++++-
 board/freescale/mx6sabresd/MAINTAINERS  |   1 +
 board/freescale/mx6sabresd/mx6sabresd.c |  90 +++----
 .../mx6sabresd/mx6sabresd_spl.cfg       |  58 -----
 board/freescale/mx6slevk/mx6slevk.c     |   7 +-
 .../mx6sxsabresd/mx6sxsabresd.c         | 159 ++++++++----
 board/gateworks/gw_ventana/clocks.cfg   |  42 ----
 .../gateworks/gw_ventana/gw_ventana.cfg |  29 ---
 .../gw_ventana/gw_ventana_spl.c         |  28 +++
 board/kosagi/novena/novena_spl.c        |  28 +++
 board/kosagi/novena/setup.cfg           |  47 ----
 board/tbs/tbs2910/tbs2910.c             |  13 +-
 board/tqc/tqma6/tqma6.c                 |  13 +-
 board/tqc/tqma6/tqma6_mba6.c            |  10 +-
 board/wandboard/wandboard.c             |  10 +-
 common/cmd_sata.c                       |  24 +-
 configs/cm_fx6_defconfig                |   2 +-
 configs/gwventana_defconfig             |   2 +-
 configs/mx6sabresd_spl_defconfig        |   2 +-
 configs/novena_defconfig                |   2 +-
 doc/README.mxsimage                     |  13 +-
 drivers/Makefile                        |   1 +
 drivers/block/ata_piix.c                |   5 +
 drivers/block/dwc_ahsata.c              |  21 ++
 drivers/block/fsl_sata.c                |   5 +
 drivers/block/pata_bfin.c               |   5 +
 drivers/block/sata_dwc.c                |   5 +
 drivers/block/sata_sil.c                |   5 +
 drivers/block/sata_sil3114.c            |   5 +
 drivers/mmc/fsl_esdhc.c                 |   8 +
 drivers/thermal/Makefile                |   9 +
 drivers/thermal/imx_thermal.c           | 177 ++++++++++++++
 drivers/thermal/thermal-uclass.c        |  30 +++
 include/configs/mx6qsabreauto.h         |  16 ++
 include/configs/mx6sabre_common.h       |   7 +-
 include/configs/mx6slevk.h              |   2 +-
 include/configs/mx6sxsabresd.h          |   8 +-
 include/configs/tqma6.h                 |  28 +--
 include/dm/uclass-id.h                  |   1 +
 include/imx_thermal.h                   |  17 ++
 include/power/pfuze100_pmic.h           |  80 ++++++
 include/sata.h                          |   3 +
 include/thermal.h                       |  42 ++++
 tools/mxsimage.c                        |  20 +-
 tools/mxsimage.h                        |   5 +-
 76 files changed, 1242 insertions(+), 451 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/mx27/relocate.S
 rename board/compulab/cm_fx6/imximage.cfg =>
arch/arm/imx-common/spl_sd.cfg (88%)
 create mode 100644 board/freescale/common/pfuze.c
 create mode 100644 board/freescale/common/pfuze.h
 delete mode 100644 board/freescale/mx6sabresd/mx6sabresd_spl.cfg
 delete mode 100644 board/gateworks/gw_ventana/clocks.cfg
 delete mode 100644 board/gateworks/gw_ventana/gw_ventana.cfg
 delete mode 100644 board/kosagi/novena/setup.cfg
 create mode 100644 drivers/thermal/Makefile
 create mode 100644 drivers/thermal/imx_thermal.c
 create mode 100644 drivers/thermal/thermal-uclass.c
 create mode 100644 include/imx_thermal.h
 create mode 100644 include/thermal.h

Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-11-14 14:48 Stefano Babic
@ 2014-11-17  0:45 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2014-11-17  0:45 UTC (permalink / raw)
  To: u-boot

On Fri, Nov 14, 2014 at 03:48:38PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx. novena is still broken, Masahiro provides
> the patch for fix it.
> 
> 
> The following changes since commit 63f7af9a4cfb4a3b9136674c6612c6d13957c2cd:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-uniphier (2014-11-11
> 15:49:10 -0500)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 05d492a3235df397da6200294ea2a802749372a8:
> 
>   arm: mx6: add support for TBS2910 Matrix ARM miniPC (2014-11-13
> 18:09:23 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141116/c1e845d8/attachment.pgp>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2014-11-14 14:48 Stefano Babic
  2014-11-17  0:45 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-11-14 14:48 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx. novena is still broken, Masahiro provides
the patch for fix it.


The following changes since commit 63f7af9a4cfb4a3b9136674c6612c6d13957c2cd:

  Merge branch 'master' of git://git.denx.de/u-boot-uniphier (2014-11-11
15:49:10 -0500)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 05d492a3235df397da6200294ea2a802749372a8:

  arm: mx6: add support for TBS2910 Matrix ARM miniPC (2014-11-13
18:09:23 +0100)

----------------------------------------------------------------
Christian Gmeiner (2):
      ot1200: add support for EHCI
      ot1200: fix card detect for usdhc4

Fabio Estevam (4):
      mx28evk: README: Revision C is also supported
      mx53loco: Change 'fdt_file' dynamically
      mx6sabresd: Fix error handling in board_mmc_init()
      mx6sabresd: Staticize when possible

John Tobias (5):
      imx6: add spl config for mx6sabresd
      imx6: add data configuration file for SPL
      kconfig: imx6: add SUPPORT_SPL
      imx6: add spl in the header file
      imx6: SPL support for iMX6 SabreSD

Nikita Kiryanov (1):
      arm: imx: make bmode command work with SPL/U-Boot combo

Nikolay Dimitrov (1):
      mx6: video_skip: Fix crash on NULL pointer

Soeren Moch (1):
      arm: mx6: add support for TBS2910 Matrix ARM miniPC

Ye.Li (2):
      imx: mx6q/dl sabre_common: Move MMC ENV offset to 512KB position
      imx: mx6q/dlsabreauto: And NAND flash support

 arch/arm/Kconfig                              |   5 +
 arch/arm/cpu/armv7/mx6/soc.c                  |   4 +-
 arch/arm/imx-common/spl.c                     |   5 +-
 arch/arm/imx-common/video.c                   |   6 +-
 board/bachmann/ot1200/ot1200.c                |   4 +-
 board/freescale/mx28evk/README                |   2 +-
 board/freescale/mx53loco/mx53loco.c           |   4 +
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |  66 +++++
 board/freescale/mx6sabresd/mx6sabresd.c       | 208 +++++++++++++-
 board/freescale/mx6sabresd/mx6sabresd_spl.cfg |  58 ++++
 board/tbs/tbs2910/Kconfig                     |  23 ++
 board/tbs/tbs2910/MAINTAINERS                 |   6 +
 board/tbs/tbs2910/Makefile                    |   7 +
 board/tbs/tbs2910/tbs2910.c                   | 398
++++++++++++++++++++++++++
 configs/mx6sabresd_spl_defconfig              |   5 +
 configs/tbs2910_defconfig                     |   3 +
 include/configs/mx53loco.h                    |   1 -
 include/configs/mx6qsabreauto.h               |  16 ++
 include/configs/mx6sabre_common.h             |   2 +-
 include/configs/mx6sabresd.h                  |   6 +
 include/configs/ot1200.h                      |   7 +
 include/configs/tbs2910.h                     | 242 ++++++++++++++++
 22 files changed, 1056 insertions(+), 22 deletions(-)
 create mode 100644 board/freescale/mx6sabresd/mx6sabresd_spl.cfg
 create mode 100644 board/tbs/tbs2910/Kconfig
 create mode 100644 board/tbs/tbs2910/MAINTAINERS
 create mode 100644 board/tbs/tbs2910/Makefile
 create mode 100644 board/tbs/tbs2910/tbs2910.c
 create mode 100644 configs/mx6sabresd_spl_defconfig
 create mode 100644 configs/tbs2910_defconfig
 create mode 100644 include/configs/tbs2910.h

Thanks,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-11-05 17:01 Stefano Babic
@ 2014-11-05 20:04 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2014-11-05 20:04 UTC (permalink / raw)
  To: u-boot

On Wed, Nov 05, 2014 at 06:01:04PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 3f97af5302ee15530411232b464d255eb2ff2ffb:
> 
>   ot1200: add sata support (2014-10-23 10:04:26 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 0b23780ff02bdbec46fac1fe4151e2ebf1eae881:
> 
>   arm: mx6: cm_fx6: detect 1GB DRAM correctly on solo (2014-11-05
> 17:18:01 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141105/2f70070a/attachment.pgp>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2014-11-05 17:01 Stefano Babic
  2014-11-05 20:04 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-11-05 17:01 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 3f97af5302ee15530411232b464d255eb2ff2ffb:

  ot1200: add sata support (2014-10-23 10:04:26 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 0b23780ff02bdbec46fac1fe4151e2ebf1eae881:

  arm: mx6: cm_fx6: detect 1GB DRAM correctly on solo (2014-11-05
17:18:01 +0100)

----------------------------------------------------------------
Anatolij Gustschin (1):
      arm: imx6: fix typos in CCM_ANALOG_PLL_VIDEO_DENOM register name

Christian Gmeiner (3):
      ot1200: add feature pads
      ot1200: add support for usdhc4
      ot1200: rework card detect for eMMC

Fabio Estevam (2):
      mx6sabresd: Add Seiko WVGA panel support
      novena: Add MAINTAINERS file

Heiko Schocher (1):
      arm, imx, spi: detect spi flash again on aristainetos board

Jeroen Hofstee (1):
      board: wandboard: add usb storage

Marek Vasut (3):
      ARM: mx6: Add support for Kosagi Novena
      mtd: nand: mxs: Add ECC geometry for 2048b/112b NAND
      arm: mxs: Define bootscript env variable on m28evk

Markus Niebel (2):
      tqma6: fix sf detection
      tqma6: fix typo in header guard define

Nikita Kiryanov (2):
      arm: mx6: cm_fx6: change issd gpio order
      arm: mx6: cm_fx6: detect 1GB DRAM correctly on solo

Nikolay Dimitrov (1):
      novena: Fix ethernet PHY reset sequence

Soeren Moch (1):
      arm: arch-mx6: typo fixes in crm_regs.h

Ye.Li (9):
      imximage: Fix the bootdata.size calculation
      imx: gpt: Add High frequency clock source support for GPT
      imx: mx6sl: Add perclk_clk_sel bit define in CCM
      imx: mx6: Change the get_ipg_per_clk for OSC 24Mhz source
      imx: mx6sl: Set the preclk clock source to OSC 24Mhz
      imx: mx6: Enable high frequency clock source for GPT
      imx: mx6sl: Add IOMUX setting for USDHC1-3
      imx: mx6slevk: Add support for USDHC1 and USDHC3 slots
      imx: mx6 sabreauto: Add board support for USB EHCI

 arch/arm/Kconfig                              |   4 +
 arch/arm/cpu/armv7/mx6/clock.c                |   4 +
 arch/arm/cpu/armv7/mx6/soc.c                  |  17 +
 arch/arm/imx-common/iomux-v3.c                |  15 +
 arch/arm/imx-common/timer.c                   |  75 +++-
 arch/arm/include/asm/arch-mx6/crm_regs.h      |  12 +-
 arch/arm/include/asm/arch-mx6/mx6sl_pins.h    |  19 +
 arch/arm/include/asm/imx-common/iomux-v3.h    |   5 +
 board/aristainetos/aristainetos.c             |   6 +
 board/bachmann/ot1200/ot1200.c                |  70 ++-
 board/compulab/cm_fx6/cm_fx6.c                |   2 +-
 board/compulab/cm_fx6/spl.c                   |   7 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |  93 ++++
 board/freescale/mx6sabresd/mx6sabresd.c       |  61 +++
 board/freescale/mx6slevk/mx6slevk.c           | 105 ++++-
 board/kosagi/novena/Kconfig                   |  18 +
 board/kosagi/novena/MAINTAINERS               |   6 +
 board/kosagi/novena/Makefile                  |  11 +
 board/kosagi/novena/novena.c                  | 340 +++++++++++++++
 board/kosagi/novena/novena_spl.c              | 584
++++++++++++++++++++++++++
 board/kosagi/novena/setup.cfg                 |  47 +++
 board/tqc/tqma6/tqma6.c                       |  10 +-
 board/tqc/tqma6/tqma6_bb.h                    |   2 +-
 configs/novena_defconfig                      |   4 +
 drivers/mtd/nand/mxs_nand.c                   |   9 +-
 include/configs/aristainetos.h                |   2 +-
 include/configs/imx6_spl.h                    |   2 +-
 include/configs/m28evk.h                      |   1 +
 include/configs/mx6_common.h                  |   1 +
 include/configs/mx6qsabreauto.h               |   3 +
 include/configs/mx6slevk.h                    |   6 +-
 include/configs/novena.h                      | 298 +++++++++++++
 include/configs/tqma6.h                       |  19 +-
 include/configs/wandboard.h                   |   9 +
 tools/imximage.c                              |   2 +-
 35 files changed, 1829 insertions(+), 40 deletions(-)
 create mode 100644 board/kosagi/novena/Kconfig
 create mode 100644 board/kosagi/novena/MAINTAINERS
 create mode 100644 board/kosagi/novena/Makefile
 create mode 100644 board/kosagi/novena/novena.c
 create mode 100644 board/kosagi/novena/novena_spl.c
 create mode 100644 board/kosagi/novena/setup.cfg
 create mode 100644 configs/novena_defconfig
 create mode 100644 include/configs/novena.h

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-10-27 12:32 Stefano Babic
@ 2014-10-27 14:32 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2014-10-27 14:32 UTC (permalink / raw)
  To: u-boot

On Mon, Oct 27, 2014 at 01:32:23PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit c43fd23cf619856b0763a64a6a3bcf3663058c49:
> 
>   Prepare v2014.10 (2014-10-14 04:47:15 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 3f97af5302ee15530411232b464d255eb2ff2ffb:
> 
>   ot1200: add sata support (2014-10-23 10:04:26 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141027/b2544be2/attachment.pgp>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2014-10-27 12:32 Stefano Babic
  2014-10-27 14:32 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-10-27 12:32 UTC (permalink / raw)
  To: u-boot

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit c43fd23cf619856b0763a64a6a3bcf3663058c49:

  Prepare v2014.10 (2014-10-14 04:47:15 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 3f97af5302ee15530411232b464d255eb2ff2ffb:

  ot1200: add sata support (2014-10-23 10:04:26 +0200)

----------------------------------------------------------------
Christian Gmeiner (3):
      ot1200: remove superfluous "string" tag
      ot1200: fix sf detection
      ot1200: add sata support

Eric Nelson (4):
      ARM: prevent compiler warnings from bootm.c
      ARM: i.MX6: include prototype for get_board_rev()
      ARM: i.MX: provide declaration for board_spi_cs_gpio
      ARM: i.MX video: declare displays and display_count publicly

Fabio Estevam (2):
      mx6qsabreauto: Add HDMI support
      mx6sabre_common: Add HDMI config to common code

 arch/arm/cpu/armv7/mx6/soc.c                  |  1 +
 arch/arm/imx-common/video.c                   |  3 --
 arch/arm/include/asm/imx-common/spi.h         | 17 ++++++++
 arch/arm/include/asm/imx-common/video.h       |  5 +++
 arch/arm/lib/bootm.c                          |  5 ++-
 board/bachmann/ot1200/Kconfig                 |  5 ---
 board/bachmann/ot1200/ot1200.c                | 10 +++++
 board/boundary/nitrogen6x/nitrogen6x.c        |  1 +
 board/compulab/cm_fx6/common.c                |  1 +
 board/embest/mx6boards/mx6boards.c            |  1 +
 board/freescale/mx6qsabreauto/mx6qsabreauto.c | 61
++++++++++++++++++++++++++-
 board/freescale/mx6slevk/mx6slevk.c           |  1 +
 board/gateworks/gw_ventana/gw_ventana.c       |  1 +
 board/genesi/mx51_efikamx/efikamx.c           |  1 +
 board/ttcontrol/vision2/vision2.c             |  1 +
 drivers/spi/mxc_spi.c                         |  1 +
 include/configs/mx6sabre_common.h             | 17 ++++++++
 include/configs/mx6sabresd.h                  | 17 --------
 include/configs/ot1200.h                      |  2 +-
 19 files changed, 123 insertions(+), 28 deletions(-)
 create mode 100644 arch/arm/include/asm/imx-common/spi.h


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-10-08  8:17 Stefano Babic
@ 2014-10-08 20:51 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-10-08 20:51 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Wed, 08 Oct 2014 10:17:49 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> cm_fx6 is still broken in u-boot-imx, but after merging with Tom's tree
> it is built correctly.

Ok -- it has been building correctly in u-boot-arm/master for some time
already.

> The following changes since commit 2a8c9c86b92a9ccee3c27286de317e19bb0530b3:
> 
>   Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2014-09-21
> 16:56:44 +0200)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 5e3a388cddce1685ccd9bc1b58ddb89a191ed88f:
> 
>   nitrogen6x: config: enable EXT4 filesystem (2014-10-06 17:57:23 +0200)
> 
> ----------------------------------------------------------------
> Andrew Ruder (2):
>       arm: mx31: use common timer functions
>       arm: mx35: use common timer functions
> 
> Christian Gmeiner (1):
>       imx6: add Bachmann OT1200 board
> 
> Diego Rondini (1):
>       nitrogen6x: config: allow boot to USB stick
> 
> Eric Nelson (23):
>       nitrogen6x: Update DDR timings for 2G memory arrangement
>       nitrogen6x: implement board_cfb_skip() to disable text output
>       nitrogen6x: configure SD2 pads for SDIO on USDHC2
>       nitrogen6x: power-down miscellanous peripherals
>       nitrogen6x: staticize board file
>       nitrogen6x: prevent warnings about board_ehci* callbacks
>       nitrogen6x: display: add qvga panel
>       nitrogen6x: display: add support for LG-9.7 LVDS display
>       nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800 displays
>       nitrogen6x: display: add support for fusion 7 display
>       nitrogen6x: display: add svga display (800x600)
>       nitrogen6x: display: add Ampire 1024x600 panel
>       nitrogen6x: display: add wvga-lvds panel
>       nitrogen6x: display use I2C detect for HDMI
>       nitrogen6x: config: add USB Mass Storage (ums) support
>       nitrogen6x: config: add initrd_high
>       nitrogen6x: config: expose SATA, then MMC over USB
>       nitrogen6x: config: enable USB keyboard support
>       nitrogen6x: config: add CONFIG_CMD_MEMTEST
>       nitrogen6x: config: enable "i2c edid"
>       nitrogen6x: config: disable logo
>       nitrogen6x: config: add gpio command
>       nitrogen6x: config: enable Android fastboot
> 
> Fabio Estevam (9):
>       mx6sxsabresd: Staticize i2c_pad_info1
>       mx6qsabreauto: Staticize when possible
>       cm_fx6: Remove CONFIG_NETMASK
>       mx51evk: Fix CONFIG_SYS_FSL_ESDHC_ADDR
>       mx51evk: Add generic board support
>       mx25pdk: Fix CONFIG_SYS_FSL_ESDHC_ADDR
>       mx25pdk: Add generic board support
>       wandboard: Select CONFIG_CMD_FUSE
>       mx6sxsabresd: Fix PCI reset and power GPIO assignments
> 
> Guillaume GARDET (1):
>       imx: nitrogen6x: Make use of both uSD and SD slots to load script
> or kernel on Sabrelite board
> 
> Kevin Mihelich (2):
>       nitrogen6x: config: use FS_GENERIC load command
>       nitrogen6x: config: enable EXT4 filesystem
> 
> Marek Vasut (11):
>       usb: ehci: mxs: Add board-specific callbacks
>       arm: mxs: Wait when disabling VDDMEM current limiter
>       arm: mxs: Wait for DRAM to start
>       arm: mxs: olinuxino: Enable USB only when needed
>       arm: mxs: olinuxino: Fine-tune DRAM configuration
>       arm: m28evk: Test if bootscript exists before loading it
>       arm: m53evk: Test if bootscript exists before loading it
>       arm: m28evk: Enable FS_GENERIC
>       arm: m53evk: Enable FS_GENERIC
>       arm: m28evk: Zap superfluous tab in env
>       arm: m53evk: Zap superfluous tab in env
> 
> Nitin Garg (3):
>       imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board
>       imx: Support i.MX6 High Assurance Boot authentication
>       imx6sx: Fix i.MX6SX HAB api function table offset
> 
> Peng Fan (3):
>       imx:mx6sxsabresd: change CONFIG_SYS_FSL_ESDHC_ADDR
>       imx:mx6qarm2: change CONFIG_SYS_FSL_ESDHC_ADDR
>       imx:mx6slevk: change CONFIG_SYS_FSL_ESDHC_ADDR
> 
> Robert Winkler (1):
>       nitrogen6x: display: add support lvds jeida screen
> 
> Stefan Agner (2):
>       mtd: nand: add Freescale vf610_nfc driver
>       arm: vf610: add NAND support for vf610twr
> 
> Stefan Roese (1):
>       ARM: mx6: gw_ventana: Remove superfluous memset of GD in board_init_f
> 
> Stefano Babic (3):
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
>       imx: Fix warning by building vf610twr_nand
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
> 
> Troy Kisky (4):
>       nitrogen6x: simplify board_mmc_getcd
>       nitrogen6x: configure SGTL5000, CSI camera clock outputs
>       nitrogen6x: phy: add 100 us delay after phy reset
>       nitrogen6x: config: allow more bootargs parameters
> 
> Ye.Li (6):
>       imx: mx6qarm2: Add the kernel FDT Loading support
>       imx: mx6qarm2: Change the mmcroot and mmcpart env value
>       imx: mx6: Checking PLL2 PFD0 and PFD2 for periph_clk before PFD reset
>       usb: ehci-mx6: Rename the USB register base address
>       imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board
>       imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards
> 
>  arch/arm/Kconfig                                                  |   4 +
>  arch/arm/cpu/arm1136/mx31/timer.c                                 | 104
> +------
>  arch/arm/cpu/arm1136/mx35/timer.c                                 |  83
> ------
>  arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c                         |  13 +-
>  arch/arm/cpu/armv7/mx6/clock.c                                    |  27 ++
>  arch/arm/cpu/armv7/mx6/hab.c                                      | 169
> ++++++++++-
>  arch/arm/cpu/armv7/mx6/soc.c                                      |  39 ++-
>  arch/arm/include/asm/arch-mx31/imx-regs.h                         |  10 +
>  arch/arm/include/asm/arch-mx35/imx-regs.h                         |  12 +
>  arch/arm/include/asm/arch-mx6/clock.h                             |   1 +
>  arch/arm/include/asm/arch-mx6/hab.h                               |  16 +-
>  arch/arm/include/asm/arch-mx6/imx-regs.h                          |   9 +-
>  board/bachmann/ot1200/Kconfig                                     |  23 ++
>  board/bachmann/ot1200/MAINTAINERS                                 |   6 +
>  board/bachmann/ot1200/Makefile                                    |   9 +
>  board/bachmann/ot1200/README                                      |  20 ++
>  board/{freescale/imx/ddr => bachmann/ot1200}/mx6q_4x_mt41j128.cfg |   0
>  board/bachmann/ot1200/ot1200.c                                    | 251
> ++++++++++++++++
>  board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg                   |  24 +-
>  board/boundary/nitrogen6x/nitrogen6x.c                            | 292
> +++++++++++++++++--
>  board/congatec/cgtqmx6eval/imximage.cfg                           | 169
> +++++++++++
>  board/freescale/mx6qarm2/MAINTAINERS                              |   4 +
>  board/freescale/mx6qarm2/imximage.cfg                             | 189
> +++++++++++-
>  board/freescale/mx6qarm2/imximage_mx6dl.cfg                       | 462
> +++++++++++++++++++++++++++++
>  board/freescale/mx6qarm2/mx6qarm2.c                               |  11 +-
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c                     |  16 +-
>  board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg                   | 169
> +++++++++++
>  board/freescale/mx6sxsabresd/mx6sxsabresd.c                       |   2 +-
>  board/freescale/vf610twr/MAINTAINERS                              |   1 +
>  board/freescale/vf610twr/vf610twr.c                               |  47 ++-
>  board/gateworks/gw_ventana/gw_ventana_spl.c                       |   7 -
>  board/olimex/mx23_olinuxino/mx23_olinuxino.c                      |  46 ++-
>  configs/cgtqmx6qeval_defconfig                                    |   2 +-
>  configs/mx6dlarm2_defconfig                                       |   3 +
>  configs/mx6dlarm2_lpddr2_defconfig                                |   3 +
>  configs/mx6qarm2_defconfig                                        |   2 +-
>  configs/mx6qarm2_lpddr2_defconfig                                 |   3 +
>  configs/mx6qsabresd_defconfig                                     |   2 +-
>  configs/ot1200_defconfig                                          |   3 +
>  configs/vf610twr_defconfig                                        |   2 +-
>  configs/vf610twr_nand_defconfig                                   |   3 +
>  drivers/mtd/nand/Makefile                                         |   1 +
>  drivers/mtd/nand/vf610_nfc.c                                      | 724
> ++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/usb/host/ehci-mx6.c                                       |   4 +-
>  drivers/usb/host/ehci-mxs.c                                       |  16 +
>  include/configs/cm_fx6.h                                          |   1 -
>  include/configs/m28evk.h                                          |  13 +-
>  include/configs/m53evk.h                                          |  13 +-
>  include/configs/mx25pdk.h                                         |   3 +-
>  include/configs/mx51evk.h                                         |   3 +-
>  include/configs/mx6qarm2.h                                        |  49
> +++-
>  include/configs/mx6slevk.h                                        |   2 +-
>  include/configs/mx6sxsabresd.h                                    |   6 +-
>  include/configs/nitrogen6x.h                                      | 113
> ++++++--
>  include/configs/ot1200.h                                          | 197
> +++++++++++++
>  include/configs/vf610twr.h                                        |  46 ++-
>  include/configs/wandboard.h                                       |   5 +
>  57 files changed, 3115 insertions(+), 339 deletions(-)
>  create mode 100644 board/bachmann/ot1200/Kconfig
>  create mode 100644 board/bachmann/ot1200/MAINTAINERS
>  create mode 100644 board/bachmann/ot1200/Makefile
>  create mode 100644 board/bachmann/ot1200/README
>  rename board/{freescale/imx/ddr =>
> bachmann/ot1200}/mx6q_4x_mt41j128.cfg (100%)
>  create mode 100644 board/bachmann/ot1200/ot1200.c
>  create mode 100644 board/congatec/cgtqmx6eval/imximage.cfg
>  create mode 100644 board/freescale/mx6qarm2/imximage_mx6dl.cfg
>  create mode 100644 board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg
>  create mode 100644 configs/mx6dlarm2_defconfig
>  create mode 100644 configs/mx6dlarm2_lpddr2_defconfig
>  create mode 100644 configs/mx6qarm2_lpddr2_defconfig
>  create mode 100644 configs/ot1200_defconfig
>  create mode 100644 configs/vf610twr_nand_defconfig
>  create mode 100644 drivers/mtd/nand/vf610_nfc.c
> 
> Best regards,
> Stefano

Applied to u-boot-arm/master, thanks.

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2014-10-08  8:17 Stefano Babic
  2014-10-08 20:51 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-10-08  8:17 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !

cm_fx6 is still broken in u-boot-imx, but after merging with Tom's tree
it is built correctly.


The following changes since commit 2a8c9c86b92a9ccee3c27286de317e19bb0530b3:

  Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2014-09-21
16:56:44 +0200)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 5e3a388cddce1685ccd9bc1b58ddb89a191ed88f:

  nitrogen6x: config: enable EXT4 filesystem (2014-10-06 17:57:23 +0200)

----------------------------------------------------------------
Andrew Ruder (2):
      arm: mx31: use common timer functions
      arm: mx35: use common timer functions

Christian Gmeiner (1):
      imx6: add Bachmann OT1200 board

Diego Rondini (1):
      nitrogen6x: config: allow boot to USB stick

Eric Nelson (23):
      nitrogen6x: Update DDR timings for 2G memory arrangement
      nitrogen6x: implement board_cfb_skip() to disable text output
      nitrogen6x: configure SD2 pads for SDIO on USDHC2
      nitrogen6x: power-down miscellanous peripherals
      nitrogen6x: staticize board file
      nitrogen6x: prevent warnings about board_ehci* callbacks
      nitrogen6x: display: add qvga panel
      nitrogen6x: display: add support for LG-9.7 LVDS display
      nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800 displays
      nitrogen6x: display: add support for fusion 7 display
      nitrogen6x: display: add svga display (800x600)
      nitrogen6x: display: add Ampire 1024x600 panel
      nitrogen6x: display: add wvga-lvds panel
      nitrogen6x: display use I2C detect for HDMI
      nitrogen6x: config: add USB Mass Storage (ums) support
      nitrogen6x: config: add initrd_high
      nitrogen6x: config: expose SATA, then MMC over USB
      nitrogen6x: config: enable USB keyboard support
      nitrogen6x: config: add CONFIG_CMD_MEMTEST
      nitrogen6x: config: enable "i2c edid"
      nitrogen6x: config: disable logo
      nitrogen6x: config: add gpio command
      nitrogen6x: config: enable Android fastboot

Fabio Estevam (9):
      mx6sxsabresd: Staticize i2c_pad_info1
      mx6qsabreauto: Staticize when possible
      cm_fx6: Remove CONFIG_NETMASK
      mx51evk: Fix CONFIG_SYS_FSL_ESDHC_ADDR
      mx51evk: Add generic board support
      mx25pdk: Fix CONFIG_SYS_FSL_ESDHC_ADDR
      mx25pdk: Add generic board support
      wandboard: Select CONFIG_CMD_FUSE
      mx6sxsabresd: Fix PCI reset and power GPIO assignments

Guillaume GARDET (1):
      imx: nitrogen6x: Make use of both uSD and SD slots to load script
or kernel on Sabrelite board

Kevin Mihelich (2):
      nitrogen6x: config: use FS_GENERIC load command
      nitrogen6x: config: enable EXT4 filesystem

Marek Vasut (11):
      usb: ehci: mxs: Add board-specific callbacks
      arm: mxs: Wait when disabling VDDMEM current limiter
      arm: mxs: Wait for DRAM to start
      arm: mxs: olinuxino: Enable USB only when needed
      arm: mxs: olinuxino: Fine-tune DRAM configuration
      arm: m28evk: Test if bootscript exists before loading it
      arm: m53evk: Test if bootscript exists before loading it
      arm: m28evk: Enable FS_GENERIC
      arm: m53evk: Enable FS_GENERIC
      arm: m28evk: Zap superfluous tab in env
      arm: m53evk: Zap superfluous tab in env

Nitin Garg (3):
      imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board
      imx: Support i.MX6 High Assurance Boot authentication
      imx6sx: Fix i.MX6SX HAB api function table offset

Peng Fan (3):
      imx:mx6sxsabresd: change CONFIG_SYS_FSL_ESDHC_ADDR
      imx:mx6qarm2: change CONFIG_SYS_FSL_ESDHC_ADDR
      imx:mx6slevk: change CONFIG_SYS_FSL_ESDHC_ADDR

Robert Winkler (1):
      nitrogen6x: display: add support lvds jeida screen

Stefan Agner (2):
      mtd: nand: add Freescale vf610_nfc driver
      arm: vf610: add NAND support for vf610twr

Stefan Roese (1):
      ARM: mx6: gw_ventana: Remove superfluous memset of GD in board_init_f

Stefano Babic (3):
      Merge branch 'master' of git://git.denx.de/u-boot-arm
      imx: Fix warning by building vf610twr_nand
      Merge branch 'master' of git://git.denx.de/u-boot-arm

Troy Kisky (4):
      nitrogen6x: simplify board_mmc_getcd
      nitrogen6x: configure SGTL5000, CSI camera clock outputs
      nitrogen6x: phy: add 100 us delay after phy reset
      nitrogen6x: config: allow more bootargs parameters

Ye.Li (6):
      imx: mx6qarm2: Add the kernel FDT Loading support
      imx: mx6qarm2: Change the mmcroot and mmcpart env value
      imx: mx6: Checking PLL2 PFD0 and PFD2 for periph_clk before PFD reset
      usb: ehci-mx6: Rename the USB register base address
      imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board
      imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards

 arch/arm/Kconfig                                                  |   4 +
 arch/arm/cpu/arm1136/mx31/timer.c                                 | 104
+------
 arch/arm/cpu/arm1136/mx35/timer.c                                 |  83
------
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c                         |  13 +-
 arch/arm/cpu/armv7/mx6/clock.c                                    |  27 ++
 arch/arm/cpu/armv7/mx6/hab.c                                      | 169
++++++++++-
 arch/arm/cpu/armv7/mx6/soc.c                                      |  39 ++-
 arch/arm/include/asm/arch-mx31/imx-regs.h                         |  10 +
 arch/arm/include/asm/arch-mx35/imx-regs.h                         |  12 +
 arch/arm/include/asm/arch-mx6/clock.h                             |   1 +
 arch/arm/include/asm/arch-mx6/hab.h                               |  16 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h                          |   9 +-
 board/bachmann/ot1200/Kconfig                                     |  23 ++
 board/bachmann/ot1200/MAINTAINERS                                 |   6 +
 board/bachmann/ot1200/Makefile                                    |   9 +
 board/bachmann/ot1200/README                                      |  20 ++
 board/{freescale/imx/ddr => bachmann/ot1200}/mx6q_4x_mt41j128.cfg |   0
 board/bachmann/ot1200/ot1200.c                                    | 251
++++++++++++++++
 board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg                   |  24 +-
 board/boundary/nitrogen6x/nitrogen6x.c                            | 292
+++++++++++++++++--
 board/congatec/cgtqmx6eval/imximage.cfg                           | 169
+++++++++++
 board/freescale/mx6qarm2/MAINTAINERS                              |   4 +
 board/freescale/mx6qarm2/imximage.cfg                             | 189
+++++++++++-
 board/freescale/mx6qarm2/imximage_mx6dl.cfg                       | 462
+++++++++++++++++++++++++++++
 board/freescale/mx6qarm2/mx6qarm2.c                               |  11 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c                     |  16 +-
 board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg                   | 169
+++++++++++
 board/freescale/mx6sxsabresd/mx6sxsabresd.c                       |   2 +-
 board/freescale/vf610twr/MAINTAINERS                              |   1 +
 board/freescale/vf610twr/vf610twr.c                               |  47 ++-
 board/gateworks/gw_ventana/gw_ventana_spl.c                       |   7 -
 board/olimex/mx23_olinuxino/mx23_olinuxino.c                      |  46 ++-
 configs/cgtqmx6qeval_defconfig                                    |   2 +-
 configs/mx6dlarm2_defconfig                                       |   3 +
 configs/mx6dlarm2_lpddr2_defconfig                                |   3 +
 configs/mx6qarm2_defconfig                                        |   2 +-
 configs/mx6qarm2_lpddr2_defconfig                                 |   3 +
 configs/mx6qsabresd_defconfig                                     |   2 +-
 configs/ot1200_defconfig                                          |   3 +
 configs/vf610twr_defconfig                                        |   2 +-
 configs/vf610twr_nand_defconfig                                   |   3 +
 drivers/mtd/nand/Makefile                                         |   1 +
 drivers/mtd/nand/vf610_nfc.c                                      | 724
++++++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/host/ehci-mx6.c                                       |   4 +-
 drivers/usb/host/ehci-mxs.c                                       |  16 +
 include/configs/cm_fx6.h                                          |   1 -
 include/configs/m28evk.h                                          |  13 +-
 include/configs/m53evk.h                                          |  13 +-
 include/configs/mx25pdk.h                                         |   3 +-
 include/configs/mx51evk.h                                         |   3 +-
 include/configs/mx6qarm2.h                                        |  49
+++-
 include/configs/mx6slevk.h                                        |   2 +-
 include/configs/mx6sxsabresd.h                                    |   6 +-
 include/configs/nitrogen6x.h                                      | 113
++++++--
 include/configs/ot1200.h                                          | 197
+++++++++++++
 include/configs/vf610twr.h                                        |  46 ++-
 include/configs/wandboard.h                                       |   5 +
 57 files changed, 3115 insertions(+), 339 deletions(-)
 create mode 100644 board/bachmann/ot1200/Kconfig
 create mode 100644 board/bachmann/ot1200/MAINTAINERS
 create mode 100644 board/bachmann/ot1200/Makefile
 create mode 100644 board/bachmann/ot1200/README
 rename board/{freescale/imx/ddr =>
bachmann/ot1200}/mx6q_4x_mt41j128.cfg (100%)
 create mode 100644 board/bachmann/ot1200/ot1200.c
 create mode 100644 board/congatec/cgtqmx6eval/imximage.cfg
 create mode 100644 board/freescale/mx6qarm2/imximage_mx6dl.cfg
 create mode 100644 board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg
 create mode 100644 configs/mx6dlarm2_defconfig
 create mode 100644 configs/mx6dlarm2_lpddr2_defconfig
 create mode 100644 configs/mx6qarm2_lpddr2_defconfig
 create mode 100644 configs/ot1200_defconfig
 create mode 100644 configs/vf610twr_nand_defconfig
 create mode 100644 drivers/mtd/nand/vf610_nfc.c

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-09-12 14:03 Stefano Babic
  2014-09-16 13:31 ` Albert ARIBAUD
  2014-09-16 14:38 ` Albert ARIBAUD
@ 2014-09-17 21:33 ` Albert ARIBAUD
  2 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-09-17 21:33 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Fri, 12 Sep 2014 16:03:15 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> The board cm_fx6 cannot be built due to a couple of missing patches that
> are already merged into u-boot-spi. Please ignore this issue, the board
> will be compiled clean at the next iteration after Jagan's tree will be
> merged by Tom.
> 
> The following changes since commit a6bc0195dba895fa0e9facc718d17eb098695685:
> 
>   Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'
> (2014-09-09 09:19:10 +0200)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 4c97f16911e229f6d5bbea5bee52449916e5fa92:
> 
>   imx: mx6slevk: Change to use generic board (2014-09-11 11:04:26 +0200)
> 
> ----------------------------------------------------------------
> Fabio Estevam (9):
>       net: fec_mxc: Adjust RX DMA alignment for mx6solox
>       net: fec_mxc: Poll FEC_TBD_READY after polling TDAR
>       tools: imximage: Fix the maximum DCD size for mx53/mx6
>       mx6dlsabresd: Use its own DCD table
>       mx6qsabreauto: Remove imx6q-sabreauto.dts
>       mx6: imx-regs: Provide a structure for GPC registers
>       pcie_imx: Add mx6solox support
>       mx6sxsabresd: Add PCI support
>       README.imximage: Fix the maximum DCD size
> 
> Guillaume GARDET (1):
>       imx: nitrogen6x: Replace 'fatload' by 'load' command in env
> settings to be filesystem independent
> 
> Nikita Kiryanov (16):
>       mx6: add clock enabling functions
>       compulab: eeprom: add support for defining eeprom i2c bus
>       sata: dwc_ahsata: implement sata_port_status
>       i2c: imx: add macros to setup pads for multiple SoC types
>       arm: mx6: ddr: cleanup
>       arm: mx6: ddr: do not write into reserved bit
>       arm: mx6: ddr: configure MMDC for slow_pd
>       arm: mx6: ddr: fix cs0_end calculation
>       arm: mx6: add get_cpu_type()
>       arm: mx6: add support for Compulab cm-fx6 CoM
>       arm: mx6: cm_fx6: add nand support
>       arm: mx6: cm_fx6: add ethernet support
>       arm: mx6: cm_fx6: add usb support
>       arm: mx6: cm_fx6: add i2c support
>       arm: mx6: cm_fx6: use eeprom
>       arm: mx6: cm_fx6: add sata support
> 
> Nikolay Dimitrov (1):
>       mx6: Fix ECSPI typo in soc_boot_modes
> 
> Stefan Agner (2):
>       arm: vf610: lpuart: fix status register handling
>       arm: vf610: lpuart: disable FIFO on initializaton
> 
> Stefano Babic (1):
>       imx: Fix build of mx6sxsabresd
> 
> Thierry Reding (1):
>       imx: ventana: Avoid undefined behaviour
> 
> Tim Harvey (6):
>       imx: ventana: updated notes regarding NAND boot errata
>       imx: ventana: base SPL MMDC calibration on width and size not board
>       imx: ventana: add GW5520 support
>       imx: ventana: added cputype env var
>       pci: add support for board_pci_fixup_dev function
>       imx: ventana: add pci fixup for PLX PEX860x switch GPIO
> 
> Ye.Li (4):
>       iMX6: Disable the L2 before chaning the PL310 latency
>       imximage: Fix imximage IVT bug for EIM-NOR boot
>       imx: mx6q/dlarm2: Change to use generic board
>       imx: mx6slevk: Change to use generic board
> 
>  arch/arm/Kconfig                            |   4 +
>  arch/arm/cpu/armv7/mx6/clock.c              | 107 +++++-
>  arch/arm/cpu/armv7/mx6/ddr.c                | 277 ++++++++--------
>  arch/arm/cpu/armv7/mx6/soc.c                |  11 +-
>  arch/arm/dts/Makefile                       |   1 -
>  arch/arm/dts/imx6q-sabreauto.dts            |  13 -
>  arch/arm/include/asm/arch-mx6/clock.h       |   5 +
>  arch/arm/include/asm/arch-mx6/imx-regs.h    |  13 +
>  arch/arm/include/asm/arch-mx6/iomux.h       |   9 +
>  arch/arm/include/asm/arch-mx6/sys_proto.h   |   5 +-
>  arch/arm/include/asm/imx-common/mxc_i2c.h   |  33 ++
>  board/compulab/cm_fx6/Kconfig               |  23 ++
>  board/compulab/cm_fx6/MAINTAINERS           |   6 +
>  board/compulab/cm_fx6/Makefile              |  12 +
>  board/compulab/cm_fx6/cm_fx6.c              | 483
> ++++++++++++++++++++++++++++
>  board/compulab/cm_fx6/common.c              |  84 +++++
>  board/compulab/cm_fx6/common.h              |  37 +++
>  board/compulab/cm_fx6/imximage.cfg          |   8 +
>  board/compulab/cm_fx6/spl.c                 | 366 +++++++++++++++++++++
>  board/compulab/common/eeprom.c              |  13 +-
>  board/freescale/mx6sabresd/mx6dlsabresd.cfg | 131 ++++++++
>  board/gateworks/gw_ventana/eeprom.c         |   3 +
>  board/gateworks/gw_ventana/gsc.c            |   4 +
>  board/gateworks/gw_ventana/gw_ventana.c     | 118 ++++++-
>  board/gateworks/gw_ventana/gw_ventana_spl.c | 189 ++++++-----
>  board/gateworks/gw_ventana/ventana_eeprom.h |   1 +
>  configs/cm_fx6_defconfig                    |   4 +
>  configs/mx6dlsabresd_defconfig              |   2 +-
>  doc/README.imximage                         |   2 +-
>  drivers/block/dwc_ahsata.c                  |  17 +
>  drivers/net/fec_mxc.c                       |  42 ++-
>  drivers/pci/pci.c                           |   4 +
>  drivers/pci/pcie_imx.c                      |  40 ++-
>  drivers/serial/serial_lpuart.c              |  19 +-
>  include/configs/cm_fx6.h                    | 290 +++++++++++++++++
>  include/configs/cm_t335.h                   |   1 +
>  include/configs/cm_t35.h                    |   1 +
>  include/configs/cm_t54.h                    |   1 +
>  include/configs/gw_ventana.h                |   1 +
>  include/configs/mx6qarm2.h                  |   2 +
>  include/configs/mx6qsabreauto.h             |   3 -
>  include/configs/mx6slevk.h                  |   2 +
>  include/configs/mx6sxsabresd.h              |  10 +
>  include/configs/nitrogen6x.h                |   6 +-
>  include/pci.h                               |   7 +
>  include/sata.h                              |   1 +
>  tools/imximage.c                            |   7 +
>  tools/imximage.h                            |   2 +-
>  48 files changed, 2140 insertions(+), 280 deletions(-)
>  delete mode 100644 arch/arm/dts/imx6q-sabreauto.dts
>  create mode 100644 board/compulab/cm_fx6/Kconfig
>  create mode 100644 board/compulab/cm_fx6/MAINTAINERS
>  create mode 100644 board/compulab/cm_fx6/Makefile
>  create mode 100644 board/compulab/cm_fx6/cm_fx6.c
>  create mode 100644 board/compulab/cm_fx6/common.c
>  create mode 100644 board/compulab/cm_fx6/common.h
>  create mode 100644 board/compulab/cm_fx6/imximage.cfg
>  create mode 100644 board/compulab/cm_fx6/spl.c
>  create mode 100644 board/freescale/mx6sabresd/mx6dlsabresd.cfg
>  create mode 100644 configs/cm_fx6_defconfig
>  create mode 100644 include/configs/cm_fx6.h
> 
> Best regards,
> Stefano
> 

Applied to u-boot-arm/master [1], thanks!

[1] with two boards (trimslice and cm_fx6)temporarily failing to build
until spi tree gets pulled)

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-09-16 15:07   ` Stefano Babic
@ 2014-09-17  8:29     ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-09-17  8:29 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Tue, 16 Sep 2014 17:07:34 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> On 16/09/2014 16:38, Albert ARIBAUD wrote:
> > Hi Stefano,
> > 
> > On Fri, 12 Sep 2014 16:03:15 +0200, Stefano Babic <sbabic@denx.de>
> > wrote:
> > 
> >> Hi Albert,
> >>
> >> please pull from u-boot-imx, thanks !
> >>
> >> The board cm_fx6 cannot be built due to a couple of missing patches that
> >> are already merged into u-boot-spi. Please ignore this issue, the board
> >> will be compiled clean at the next iteration after Jagan's tree will be
> >> merged by Tom.
> >>
> >> The following changes since commit a6bc0195dba895fa0e9facc718d17eb098695685:
> >>
> >>   Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'
> >> (2014-09-09 09:19:10 +0200)
> >>
> >> are available in the git repository at:
> >>
> >>
> >>   git://www.denx.de/git/u-boot-imx.git master
> >>
> >> for you to fetch changes up to 4c97f16911e229f6d5bbea5bee52449916e5fa92:
> >>
> >>   imx: mx6slevk: Change to use generic board (2014-09-11 11:04:26 +0200)
> >>
> >> ----------------------------------------------------------------
> >> Fabio Estevam (9):
> >>       net: fec_mxc: Adjust RX DMA alignment for mx6solox
> >>       net: fec_mxc: Poll FEC_TBD_READY after polling TDAR
> >>       tools: imximage: Fix the maximum DCD size for mx53/mx6
> >>       mx6dlsabresd: Use its own DCD table
> >>       mx6qsabreauto: Remove imx6q-sabreauto.dts
> >>       mx6: imx-regs: Provide a structure for GPC registers
> >>       pcie_imx: Add mx6solox support
> >>       mx6sxsabresd: Add PCI support
> >>       README.imximage: Fix the maximum DCD size
> >>
> >> Guillaume GARDET (1):
> >>       imx: nitrogen6x: Replace 'fatload' by 'load' command in env
> >> settings to be filesystem independent
> >>
> >> Nikita Kiryanov (16):
> >>       mx6: add clock enabling functions
> >>       compulab: eeprom: add support for defining eeprom i2c bus
> > 
> > The commit above (52658fda7abc) breaks trimslice build (and later will
> > break cm_fx6 when it is introduced by 0991866cf7, or possibly before
> > that, at f66113c0ef) with the following errors :
> > 
> 
> This is due to the fact that some patches were already merged by Jagan
> into u-boot-spi and not by me. In fact, I have cherry-picked the
> relevant patches from Jagan's tree:
> 
> a7434e2efa6d514b449c51d57e7af79387761349
> [next d709570] spl: replace CONFIG_SPL_SPI_* with CONFIG_SF_DEFAULT_*
>  Author: Nikita Kiryanov <nikita@compulab.co.il>
> 
> fd2dd067fa4f0ea28e80071806850b058dd9555d
> [next 8cca248] spi: mxc: fix sf probe when using mxc_spi
>  Author: Nikita Kiryanov <nikita@compulab.co.il>
>  16 files changed, 79 insertions(+), 33 deletions(-)
> 
> bdb070e9810017711cff5486eb09c387043be7c6
> [next 92c569e] mtd: spi: add support for M25PE16 and M25PX16
>  Author: Nikita Kiryanov <nikita@compulab.co.il>
>  1 file changed, 2 insertions(+)
> 
> and then the board is built without any issue.
> ./MAKEALL cm_fx6
> boards.cfg is up to date. Nothing to do.
> Building cm_fx6 board...
>    text	   data	    bss	    dec	    hex	filename
>  252164	  26298	 318528	 596990	  91bfe	./u-boot
>   27088	   2464	    112	  29664	   73e0	./spl/u-boot-spl
> 
> 
> However, patches were already merged. The issue should be solved when
> u-boot-spi and u-boot-arm will be pulled by Tom. Or do you think we have
> to do something before ?

There is not much we can do now, so we'll have to make sure u-boot-arm
and u-boot-spi et merged into mainline properly.

The problem I see with this type of situation is that non-mainline
U-Boot trees (imx, arm, spi...) are supposed to be useable code ontheir
own right, and here, imx and arm trees become (slightly) unusable,
which prevents things like bisecting in case you end up on a non-
buildable commit.

The only solution I can think of -- and it does not solve all cases --
is to never pull in commits or merges from an unrelated tree (e.g., to
not pull from spi to arm tree), only from an upstream tree (e.g. pulling
from mainline to arm is ok, as is pulling from mainline or arm to imx),
and to avoid scattering a patch series over several trees, but rather,
apply it to a single tree, with Acks from other custodians and/or
maintainers involved.

> Best regards,
> Stefano

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-09-16 14:38 ` Albert ARIBAUD
  2014-09-16 15:07   ` Stefano Babic
@ 2014-09-17  7:12   ` Nikita Kiryanov
  1 sibling, 0 replies; 307+ messages in thread
From: Nikita Kiryanov @ 2014-09-17  7:12 UTC (permalink / raw)
  To: u-boot

Hi Albert,

On 16/09/14 17:38, Albert ARIBAUD wrote:
> Hi Stefano,
>
> On Fri, 12 Sep 2014 16:03:15 +0200, Stefano Babic <sbabic@denx.de>
> wrote:
>
>> Hi Albert,
>>
>> please pull from u-boot-imx, thanks !
>>
>> The board cm_fx6 cannot be built due to a couple of missing patches that
>> are already merged into u-boot-spi. Please ignore this issue, the board
>> will be compiled clean at the next iteration after Jagan's tree will be
>> merged by Tom.
>>
>> The following changes since commit a6bc0195dba895fa0e9facc718d17eb098695685:
>>
>>    Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'
>> (2014-09-09 09:19:10 +0200)
>>
>> are available in the git repository at:
>>
>>
>>    git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to 4c97f16911e229f6d5bbea5bee52449916e5fa92:
>>
>>    imx: mx6slevk: Change to use generic board (2014-09-11 11:04:26 +0200)
>>
>> ----------------------------------------------------------------
>> Fabio Estevam (9):
>>        net: fec_mxc: Adjust RX DMA alignment for mx6solox
>>        net: fec_mxc: Poll FEC_TBD_READY after polling TDAR
>>        tools: imximage: Fix the maximum DCD size for mx53/mx6
>>        mx6dlsabresd: Use its own DCD table
>>        mx6qsabreauto: Remove imx6q-sabreauto.dts
>>        mx6: imx-regs: Provide a structure for GPC registers
>>        pcie_imx: Add mx6solox support
>>        mx6sxsabresd: Add PCI support
>>        README.imximage: Fix the maximum DCD size
>>
>> Guillaume GARDET (1):
>>        imx: nitrogen6x: Replace 'fatload' by 'load' command in env
>> settings to be filesystem independent
>>
>> Nikita Kiryanov (16):
>>        mx6: add clock enabling functions
>>        compulab: eeprom: add support for defining eeprom i2c bus
>
> The commit above (52658fda7abc) breaks trimslice build (and later will
> break cm_fx6 when it is introduced by 0991866cf7, or possibly before
> that, at f66113c0ef) with the following errors :
>
> | board/compulab/common/eeprom.c:37:24: error: 'CONFIG_SYS_I2C_EEPROM_BUS' undeclared (first use in this function)
>
> | board/compulab/common/eeprom.c:37:24: error: 'CONFIG_SYS_I2C_EEPROM_BUS' undeclared (first use in this function)
> | board/compulab/common/eeprom.c:37:24: note: each undeclared identifier is reported only once for each function it appears in
>
> (The repeat is certainly due to the same source file being built for SPL
> then for U-Boot. Why the note is emitted only in one intance and not
> the other is waaaaay beyond me.)

cm_fx6 will build correctly with all the patches from the series
applied. As for Trimslice, this is something I missed because I know
it doesn't use the eeprom code, but after commit 
39338a30fab2ce7d80dfe0d457071573727f499f it is built anyway.

I think a follow up patch would be the easiest way to address this.
What do you think?

>
>>        sata: dwc_ahsata: implement sata_port_status
>>        i2c: imx: add macros to setup pads for multiple SoC types
>>        arm: mx6: ddr: cleanup
>>        arm: mx6: ddr: do not write into reserved bit
>>        arm: mx6: ddr: configure MMDC for slow_pd
>>        arm: mx6: ddr: fix cs0_end calculation
>>        arm: mx6: add get_cpu_type()
>>        arm: mx6: add support for Compulab cm-fx6 CoM
>>        arm: mx6: cm_fx6: add nand support
>>        arm: mx6: cm_fx6: add ethernet support
>>        arm: mx6: cm_fx6: add usb support
>>        arm: mx6: cm_fx6: add i2c support
>>        arm: mx6: cm_fx6: use eeprom
>>        arm: mx6: cm_fx6: add sata support
>>
>> Nikolay Dimitrov (1):
>>        mx6: Fix ECSPI typo in soc_boot_modes
>>
>> Stefan Agner (2):
>>        arm: vf610: lpuart: fix status register handling
>>        arm: vf610: lpuart: disable FIFO on initializaton
>>
>> Stefano Babic (1):
>>        imx: Fix build of mx6sxsabresd
>>
>> Thierry Reding (1):
>>        imx: ventana: Avoid undefined behaviour
>>
>> Tim Harvey (6):
>>        imx: ventana: updated notes regarding NAND boot errata
>>        imx: ventana: base SPL MMDC calibration on width and size not board
>>        imx: ventana: add GW5520 support
>>        imx: ventana: added cputype env var
>>        pci: add support for board_pci_fixup_dev function
>>        imx: ventana: add pci fixup for PLX PEX860x switch GPIO
>>
>> Ye.Li (4):
>>        iMX6: Disable the L2 before chaning the PL310 latency
>>        imximage: Fix imximage IVT bug for EIM-NOR boot
>>        imx: mx6q/dlarm2: Change to use generic board
>>        imx: mx6slevk: Change to use generic board
>>
>>   arch/arm/Kconfig                            |   4 +
>>   arch/arm/cpu/armv7/mx6/clock.c              | 107 +++++-
>>   arch/arm/cpu/armv7/mx6/ddr.c                | 277 ++++++++--------
>>   arch/arm/cpu/armv7/mx6/soc.c                |  11 +-
>>   arch/arm/dts/Makefile                       |   1 -
>>   arch/arm/dts/imx6q-sabreauto.dts            |  13 -
>>   arch/arm/include/asm/arch-mx6/clock.h       |   5 +
>>   arch/arm/include/asm/arch-mx6/imx-regs.h    |  13 +
>>   arch/arm/include/asm/arch-mx6/iomux.h       |   9 +
>>   arch/arm/include/asm/arch-mx6/sys_proto.h   |   5 +-
>>   arch/arm/include/asm/imx-common/mxc_i2c.h   |  33 ++
>>   board/compulab/cm_fx6/Kconfig               |  23 ++
>>   board/compulab/cm_fx6/MAINTAINERS           |   6 +
>>   board/compulab/cm_fx6/Makefile              |  12 +
>>   board/compulab/cm_fx6/cm_fx6.c              | 483
>> ++++++++++++++++++++++++++++
>>   board/compulab/cm_fx6/common.c              |  84 +++++
>>   board/compulab/cm_fx6/common.h              |  37 +++
>>   board/compulab/cm_fx6/imximage.cfg          |   8 +
>>   board/compulab/cm_fx6/spl.c                 | 366 +++++++++++++++++++++
>>   board/compulab/common/eeprom.c              |  13 +-
>>   board/freescale/mx6sabresd/mx6dlsabresd.cfg | 131 ++++++++
>>   board/gateworks/gw_ventana/eeprom.c         |   3 +
>>   board/gateworks/gw_ventana/gsc.c            |   4 +
>>   board/gateworks/gw_ventana/gw_ventana.c     | 118 ++++++-
>>   board/gateworks/gw_ventana/gw_ventana_spl.c | 189 ++++++-----
>>   board/gateworks/gw_ventana/ventana_eeprom.h |   1 +
>>   configs/cm_fx6_defconfig                    |   4 +
>>   configs/mx6dlsabresd_defconfig              |   2 +-
>>   doc/README.imximage                         |   2 +-
>>   drivers/block/dwc_ahsata.c                  |  17 +
>>   drivers/net/fec_mxc.c                       |  42 ++-
>>   drivers/pci/pci.c                           |   4 +
>>   drivers/pci/pcie_imx.c                      |  40 ++-
>>   drivers/serial/serial_lpuart.c              |  19 +-
>>   include/configs/cm_fx6.h                    | 290 +++++++++++++++++
>>   include/configs/cm_t335.h                   |   1 +
>>   include/configs/cm_t35.h                    |   1 +
>>   include/configs/cm_t54.h                    |   1 +
>>   include/configs/gw_ventana.h                |   1 +
>>   include/configs/mx6qarm2.h                  |   2 +
>>   include/configs/mx6qsabreauto.h             |   3 -
>>   include/configs/mx6slevk.h                  |   2 +
>>   include/configs/mx6sxsabresd.h              |  10 +
>>   include/configs/nitrogen6x.h                |   6 +-
>>   include/pci.h                               |   7 +
>>   include/sata.h                              |   1 +
>>   tools/imximage.c                            |   7 +
>>   tools/imximage.h                            |   2 +-
>>   48 files changed, 2140 insertions(+), 280 deletions(-)
>>   delete mode 100644 arch/arm/dts/imx6q-sabreauto.dts
>>   create mode 100644 board/compulab/cm_fx6/Kconfig
>>   create mode 100644 board/compulab/cm_fx6/MAINTAINERS
>>   create mode 100644 board/compulab/cm_fx6/Makefile
>>   create mode 100644 board/compulab/cm_fx6/cm_fx6.c
>>   create mode 100644 board/compulab/cm_fx6/common.c
>>   create mode 100644 board/compulab/cm_fx6/common.h
>>   create mode 100644 board/compulab/cm_fx6/imximage.cfg
>>   create mode 100644 board/compulab/cm_fx6/spl.c
>>   create mode 100644 board/freescale/mx6sabresd/mx6dlsabresd.cfg
>>   create mode 100644 configs/cm_fx6_defconfig
>>   create mode 100644 include/configs/cm_fx6.h
>>
>> Best regards,
>> Stefano
>
> Amicalement,
>

-- 
Regards,
Nikita Kiryanov

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-09-16 14:38 ` Albert ARIBAUD
@ 2014-09-16 15:07   ` Stefano Babic
  2014-09-17  8:29     ` Albert ARIBAUD
  2014-09-17  7:12   ` Nikita Kiryanov
  1 sibling, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-09-16 15:07 UTC (permalink / raw)
  To: u-boot

Hi Albert,

On 16/09/2014 16:38, Albert ARIBAUD wrote:
> Hi Stefano,
> 
> On Fri, 12 Sep 2014 16:03:15 +0200, Stefano Babic <sbabic@denx.de>
> wrote:
> 
>> Hi Albert,
>>
>> please pull from u-boot-imx, thanks !
>>
>> The board cm_fx6 cannot be built due to a couple of missing patches that
>> are already merged into u-boot-spi. Please ignore this issue, the board
>> will be compiled clean at the next iteration after Jagan's tree will be
>> merged by Tom.
>>
>> The following changes since commit a6bc0195dba895fa0e9facc718d17eb098695685:
>>
>>   Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'
>> (2014-09-09 09:19:10 +0200)
>>
>> are available in the git repository at:
>>
>>
>>   git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to 4c97f16911e229f6d5bbea5bee52449916e5fa92:
>>
>>   imx: mx6slevk: Change to use generic board (2014-09-11 11:04:26 +0200)
>>
>> ----------------------------------------------------------------
>> Fabio Estevam (9):
>>       net: fec_mxc: Adjust RX DMA alignment for mx6solox
>>       net: fec_mxc: Poll FEC_TBD_READY after polling TDAR
>>       tools: imximage: Fix the maximum DCD size for mx53/mx6
>>       mx6dlsabresd: Use its own DCD table
>>       mx6qsabreauto: Remove imx6q-sabreauto.dts
>>       mx6: imx-regs: Provide a structure for GPC registers
>>       pcie_imx: Add mx6solox support
>>       mx6sxsabresd: Add PCI support
>>       README.imximage: Fix the maximum DCD size
>>
>> Guillaume GARDET (1):
>>       imx: nitrogen6x: Replace 'fatload' by 'load' command in env
>> settings to be filesystem independent
>>
>> Nikita Kiryanov (16):
>>       mx6: add clock enabling functions
>>       compulab: eeprom: add support for defining eeprom i2c bus
> 
> The commit above (52658fda7abc) breaks trimslice build (and later will
> break cm_fx6 when it is introduced by 0991866cf7, or possibly before
> that, at f66113c0ef) with the following errors :
> 

This is due to the fact that some patches were already merged by Jagan
into u-boot-spi and not by me. In fact, I have cherry-picked the
relevant patches from Jagan's tree:

a7434e2efa6d514b449c51d57e7af79387761349
[next d709570] spl: replace CONFIG_SPL_SPI_* with CONFIG_SF_DEFAULT_*
 Author: Nikita Kiryanov <nikita@compulab.co.il>

fd2dd067fa4f0ea28e80071806850b058dd9555d
[next 8cca248] spi: mxc: fix sf probe when using mxc_spi
 Author: Nikita Kiryanov <nikita@compulab.co.il>
 16 files changed, 79 insertions(+), 33 deletions(-)

bdb070e9810017711cff5486eb09c387043be7c6
[next 92c569e] mtd: spi: add support for M25PE16 and M25PX16
 Author: Nikita Kiryanov <nikita@compulab.co.il>
 1 file changed, 2 insertions(+)

and then the board is built without any issue.
./MAKEALL cm_fx6
boards.cfg is up to date. Nothing to do.
Building cm_fx6 board...
   text	   data	    bss	    dec	    hex	filename
 252164	  26298	 318528	 596990	  91bfe	./u-boot
  27088	   2464	    112	  29664	   73e0	./spl/u-boot-spl


However, patches were already merged. The issue should be solved when
u-boot-spi and u-boot-arm will be pulled by Tom. Or do you think we have
to do something before ?

Best regards,
Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-09-12 14:03 Stefano Babic
  2014-09-16 13:31 ` Albert ARIBAUD
@ 2014-09-16 14:38 ` Albert ARIBAUD
  2014-09-16 15:07   ` Stefano Babic
  2014-09-17  7:12   ` Nikita Kiryanov
  2014-09-17 21:33 ` Albert ARIBAUD
  2 siblings, 2 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-09-16 14:38 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Fri, 12 Sep 2014 16:03:15 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> The board cm_fx6 cannot be built due to a couple of missing patches that
> are already merged into u-boot-spi. Please ignore this issue, the board
> will be compiled clean at the next iteration after Jagan's tree will be
> merged by Tom.
> 
> The following changes since commit a6bc0195dba895fa0e9facc718d17eb098695685:
> 
>   Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'
> (2014-09-09 09:19:10 +0200)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 4c97f16911e229f6d5bbea5bee52449916e5fa92:
> 
>   imx: mx6slevk: Change to use generic board (2014-09-11 11:04:26 +0200)
> 
> ----------------------------------------------------------------
> Fabio Estevam (9):
>       net: fec_mxc: Adjust RX DMA alignment for mx6solox
>       net: fec_mxc: Poll FEC_TBD_READY after polling TDAR
>       tools: imximage: Fix the maximum DCD size for mx53/mx6
>       mx6dlsabresd: Use its own DCD table
>       mx6qsabreauto: Remove imx6q-sabreauto.dts
>       mx6: imx-regs: Provide a structure for GPC registers
>       pcie_imx: Add mx6solox support
>       mx6sxsabresd: Add PCI support
>       README.imximage: Fix the maximum DCD size
> 
> Guillaume GARDET (1):
>       imx: nitrogen6x: Replace 'fatload' by 'load' command in env
> settings to be filesystem independent
> 
> Nikita Kiryanov (16):
>       mx6: add clock enabling functions
>       compulab: eeprom: add support for defining eeprom i2c bus

The commit above (52658fda7abc) breaks trimslice build (and later will
break cm_fx6 when it is introduced by 0991866cf7, or possibly before
that, at f66113c0ef) with the following errors :

| board/compulab/common/eeprom.c:37:24: error: 'CONFIG_SYS_I2C_EEPROM_BUS' undeclared (first use in this function) 

| board/compulab/common/eeprom.c:37:24: error: 'CONFIG_SYS_I2C_EEPROM_BUS' undeclared (first use in this function) 
| board/compulab/common/eeprom.c:37:24: note: each undeclared identifier is reported only once for each function it appears in 

(The repeat is certainly due to the same source file being built for SPL
then for U-Boot. Why the note is emitted only in one intance and not
the other is waaaaay beyond me.)

>       sata: dwc_ahsata: implement sata_port_status
>       i2c: imx: add macros to setup pads for multiple SoC types
>       arm: mx6: ddr: cleanup
>       arm: mx6: ddr: do not write into reserved bit
>       arm: mx6: ddr: configure MMDC for slow_pd
>       arm: mx6: ddr: fix cs0_end calculation
>       arm: mx6: add get_cpu_type()
>       arm: mx6: add support for Compulab cm-fx6 CoM
>       arm: mx6: cm_fx6: add nand support
>       arm: mx6: cm_fx6: add ethernet support
>       arm: mx6: cm_fx6: add usb support
>       arm: mx6: cm_fx6: add i2c support
>       arm: mx6: cm_fx6: use eeprom
>       arm: mx6: cm_fx6: add sata support
> 
> Nikolay Dimitrov (1):
>       mx6: Fix ECSPI typo in soc_boot_modes
> 
> Stefan Agner (2):
>       arm: vf610: lpuart: fix status register handling
>       arm: vf610: lpuart: disable FIFO on initializaton
> 
> Stefano Babic (1):
>       imx: Fix build of mx6sxsabresd
> 
> Thierry Reding (1):
>       imx: ventana: Avoid undefined behaviour
> 
> Tim Harvey (6):
>       imx: ventana: updated notes regarding NAND boot errata
>       imx: ventana: base SPL MMDC calibration on width and size not board
>       imx: ventana: add GW5520 support
>       imx: ventana: added cputype env var
>       pci: add support for board_pci_fixup_dev function
>       imx: ventana: add pci fixup for PLX PEX860x switch GPIO
> 
> Ye.Li (4):
>       iMX6: Disable the L2 before chaning the PL310 latency
>       imximage: Fix imximage IVT bug for EIM-NOR boot
>       imx: mx6q/dlarm2: Change to use generic board
>       imx: mx6slevk: Change to use generic board
> 
>  arch/arm/Kconfig                            |   4 +
>  arch/arm/cpu/armv7/mx6/clock.c              | 107 +++++-
>  arch/arm/cpu/armv7/mx6/ddr.c                | 277 ++++++++--------
>  arch/arm/cpu/armv7/mx6/soc.c                |  11 +-
>  arch/arm/dts/Makefile                       |   1 -
>  arch/arm/dts/imx6q-sabreauto.dts            |  13 -
>  arch/arm/include/asm/arch-mx6/clock.h       |   5 +
>  arch/arm/include/asm/arch-mx6/imx-regs.h    |  13 +
>  arch/arm/include/asm/arch-mx6/iomux.h       |   9 +
>  arch/arm/include/asm/arch-mx6/sys_proto.h   |   5 +-
>  arch/arm/include/asm/imx-common/mxc_i2c.h   |  33 ++
>  board/compulab/cm_fx6/Kconfig               |  23 ++
>  board/compulab/cm_fx6/MAINTAINERS           |   6 +
>  board/compulab/cm_fx6/Makefile              |  12 +
>  board/compulab/cm_fx6/cm_fx6.c              | 483
> ++++++++++++++++++++++++++++
>  board/compulab/cm_fx6/common.c              |  84 +++++
>  board/compulab/cm_fx6/common.h              |  37 +++
>  board/compulab/cm_fx6/imximage.cfg          |   8 +
>  board/compulab/cm_fx6/spl.c                 | 366 +++++++++++++++++++++
>  board/compulab/common/eeprom.c              |  13 +-
>  board/freescale/mx6sabresd/mx6dlsabresd.cfg | 131 ++++++++
>  board/gateworks/gw_ventana/eeprom.c         |   3 +
>  board/gateworks/gw_ventana/gsc.c            |   4 +
>  board/gateworks/gw_ventana/gw_ventana.c     | 118 ++++++-
>  board/gateworks/gw_ventana/gw_ventana_spl.c | 189 ++++++-----
>  board/gateworks/gw_ventana/ventana_eeprom.h |   1 +
>  configs/cm_fx6_defconfig                    |   4 +
>  configs/mx6dlsabresd_defconfig              |   2 +-
>  doc/README.imximage                         |   2 +-
>  drivers/block/dwc_ahsata.c                  |  17 +
>  drivers/net/fec_mxc.c                       |  42 ++-
>  drivers/pci/pci.c                           |   4 +
>  drivers/pci/pcie_imx.c                      |  40 ++-
>  drivers/serial/serial_lpuart.c              |  19 +-
>  include/configs/cm_fx6.h                    | 290 +++++++++++++++++
>  include/configs/cm_t335.h                   |   1 +
>  include/configs/cm_t35.h                    |   1 +
>  include/configs/cm_t54.h                    |   1 +
>  include/configs/gw_ventana.h                |   1 +
>  include/configs/mx6qarm2.h                  |   2 +
>  include/configs/mx6qsabreauto.h             |   3 -
>  include/configs/mx6slevk.h                  |   2 +
>  include/configs/mx6sxsabresd.h              |  10 +
>  include/configs/nitrogen6x.h                |   6 +-
>  include/pci.h                               |   7 +
>  include/sata.h                              |   1 +
>  tools/imximage.c                            |   7 +
>  tools/imximage.h                            |   2 +-
>  48 files changed, 2140 insertions(+), 280 deletions(-)
>  delete mode 100644 arch/arm/dts/imx6q-sabreauto.dts
>  create mode 100644 board/compulab/cm_fx6/Kconfig
>  create mode 100644 board/compulab/cm_fx6/MAINTAINERS
>  create mode 100644 board/compulab/cm_fx6/Makefile
>  create mode 100644 board/compulab/cm_fx6/cm_fx6.c
>  create mode 100644 board/compulab/cm_fx6/common.c
>  create mode 100644 board/compulab/cm_fx6/common.h
>  create mode 100644 board/compulab/cm_fx6/imximage.cfg
>  create mode 100644 board/compulab/cm_fx6/spl.c
>  create mode 100644 board/freescale/mx6sabresd/mx6dlsabresd.cfg
>  create mode 100644 configs/cm_fx6_defconfig
>  create mode 100644 include/configs/cm_fx6.h
> 
> Best regards,
> Stefano

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-09-16 13:31 ` Albert ARIBAUD
  2014-09-16 13:34   ` Fabio Estevam
@ 2014-09-16 13:50   ` Stefano Babic
  1 sibling, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2014-09-16 13:50 UTC (permalink / raw)
  To: u-boot

Hi Albert,

On 16/09/2014 15:31, Albert ARIBAUD wrote:
> Hi Stefano,
> 
> On Fri, 12 Sep 2014 16:03:15 +0200, Stefano Babic <sbabic@denx.de>
> wrote:
> 
>> Hi Albert,
>>
>> please pull from u-boot-imx, thanks !
> 
> Underway.
> 
> Note that in the commits that you have added past 4c97... (which I did
> *not* take in this PR, of course), there is this one:

Thanks - I am merging further patches today.

> 
> d6d07a9b... arm: vf610: add NAND support for vf610twr
> 
> Which causes a warning when building the boards.cfg file:
> 
> WARNING: no status info for 'vf610twr_nand'
> WARNING: no maintainers for 'vf610twr_nand'WARNING: no status info for
> 'vf610twr_nand'

Right, I have seen the same issue, thanks !

> 
> It may require a fix before getting in a PR.

Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-09-16 13:31 ` Albert ARIBAUD
@ 2014-09-16 13:34   ` Fabio Estevam
  2014-09-16 13:50   ` Stefano Babic
  1 sibling, 0 replies; 307+ messages in thread
From: Fabio Estevam @ 2014-09-16 13:34 UTC (permalink / raw)
  To: u-boot

On Tue, Sep 16, 2014 at 10:31 AM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:

> Note that in the commits that you have added past 4c97... (which I did
> *not* take in this PR, of course), there is this one:
>
> d6d07a9b... arm: vf610: add NAND support for vf610twr
>
> Which causes a warning when building the boards.cfg file:
>
> WARNING: no status info for 'vf610twr_nand'
> WARNING: no maintainers for 'vf610twr_nand'WARNING: no status info for
> 'vf610twr_nand'
>
> It may require a fix before getting in a PR.

Adding Stefan Agner.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-09-12 14:03 Stefano Babic
@ 2014-09-16 13:31 ` Albert ARIBAUD
  2014-09-16 13:34   ` Fabio Estevam
  2014-09-16 13:50   ` Stefano Babic
  2014-09-16 14:38 ` Albert ARIBAUD
  2014-09-17 21:33 ` Albert ARIBAUD
  2 siblings, 2 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-09-16 13:31 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Fri, 12 Sep 2014 16:03:15 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !

Underway.

Note that in the commits that you have added past 4c97... (which I did
*not* take in this PR, of course), there is this one:

d6d07a9b... arm: vf610: add NAND support for vf610twr

Which causes a warning when building the boards.cfg file:

WARNING: no status info for 'vf610twr_nand'
WARNING: no maintainers for 'vf610twr_nand'WARNING: no status info for
'vf610twr_nand'

It may require a fix before getting in a PR.

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2014-09-12 14:03 Stefano Babic
  2014-09-16 13:31 ` Albert ARIBAUD
                   ` (2 more replies)
  0 siblings, 3 replies; 307+ messages in thread
From: Stefano Babic @ 2014-09-12 14:03 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !

The board cm_fx6 cannot be built due to a couple of missing patches that
are already merged into u-boot-spi. Please ignore this issue, the board
will be compiled clean at the next iteration after Jagan's tree will be
merged by Tom.

The following changes since commit a6bc0195dba895fa0e9facc718d17eb098695685:

  Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'
(2014-09-09 09:19:10 +0200)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 4c97f16911e229f6d5bbea5bee52449916e5fa92:

  imx: mx6slevk: Change to use generic board (2014-09-11 11:04:26 +0200)

----------------------------------------------------------------
Fabio Estevam (9):
      net: fec_mxc: Adjust RX DMA alignment for mx6solox
      net: fec_mxc: Poll FEC_TBD_READY after polling TDAR
      tools: imximage: Fix the maximum DCD size for mx53/mx6
      mx6dlsabresd: Use its own DCD table
      mx6qsabreauto: Remove imx6q-sabreauto.dts
      mx6: imx-regs: Provide a structure for GPC registers
      pcie_imx: Add mx6solox support
      mx6sxsabresd: Add PCI support
      README.imximage: Fix the maximum DCD size

Guillaume GARDET (1):
      imx: nitrogen6x: Replace 'fatload' by 'load' command in env
settings to be filesystem independent

Nikita Kiryanov (16):
      mx6: add clock enabling functions
      compulab: eeprom: add support for defining eeprom i2c bus
      sata: dwc_ahsata: implement sata_port_status
      i2c: imx: add macros to setup pads for multiple SoC types
      arm: mx6: ddr: cleanup
      arm: mx6: ddr: do not write into reserved bit
      arm: mx6: ddr: configure MMDC for slow_pd
      arm: mx6: ddr: fix cs0_end calculation
      arm: mx6: add get_cpu_type()
      arm: mx6: add support for Compulab cm-fx6 CoM
      arm: mx6: cm_fx6: add nand support
      arm: mx6: cm_fx6: add ethernet support
      arm: mx6: cm_fx6: add usb support
      arm: mx6: cm_fx6: add i2c support
      arm: mx6: cm_fx6: use eeprom
      arm: mx6: cm_fx6: add sata support

Nikolay Dimitrov (1):
      mx6: Fix ECSPI typo in soc_boot_modes

Stefan Agner (2):
      arm: vf610: lpuart: fix status register handling
      arm: vf610: lpuart: disable FIFO on initializaton

Stefano Babic (1):
      imx: Fix build of mx6sxsabresd

Thierry Reding (1):
      imx: ventana: Avoid undefined behaviour

Tim Harvey (6):
      imx: ventana: updated notes regarding NAND boot errata
      imx: ventana: base SPL MMDC calibration on width and size not board
      imx: ventana: add GW5520 support
      imx: ventana: added cputype env var
      pci: add support for board_pci_fixup_dev function
      imx: ventana: add pci fixup for PLX PEX860x switch GPIO

Ye.Li (4):
      iMX6: Disable the L2 before chaning the PL310 latency
      imximage: Fix imximage IVT bug for EIM-NOR boot
      imx: mx6q/dlarm2: Change to use generic board
      imx: mx6slevk: Change to use generic board

 arch/arm/Kconfig                            |   4 +
 arch/arm/cpu/armv7/mx6/clock.c              | 107 +++++-
 arch/arm/cpu/armv7/mx6/ddr.c                | 277 ++++++++--------
 arch/arm/cpu/armv7/mx6/soc.c                |  11 +-
 arch/arm/dts/Makefile                       |   1 -
 arch/arm/dts/imx6q-sabreauto.dts            |  13 -
 arch/arm/include/asm/arch-mx6/clock.h       |   5 +
 arch/arm/include/asm/arch-mx6/imx-regs.h    |  13 +
 arch/arm/include/asm/arch-mx6/iomux.h       |   9 +
 arch/arm/include/asm/arch-mx6/sys_proto.h   |   5 +-
 arch/arm/include/asm/imx-common/mxc_i2c.h   |  33 ++
 board/compulab/cm_fx6/Kconfig               |  23 ++
 board/compulab/cm_fx6/MAINTAINERS           |   6 +
 board/compulab/cm_fx6/Makefile              |  12 +
 board/compulab/cm_fx6/cm_fx6.c              | 483
++++++++++++++++++++++++++++
 board/compulab/cm_fx6/common.c              |  84 +++++
 board/compulab/cm_fx6/common.h              |  37 +++
 board/compulab/cm_fx6/imximage.cfg          |   8 +
 board/compulab/cm_fx6/spl.c                 | 366 +++++++++++++++++++++
 board/compulab/common/eeprom.c              |  13 +-
 board/freescale/mx6sabresd/mx6dlsabresd.cfg | 131 ++++++++
 board/gateworks/gw_ventana/eeprom.c         |   3 +
 board/gateworks/gw_ventana/gsc.c            |   4 +
 board/gateworks/gw_ventana/gw_ventana.c     | 118 ++++++-
 board/gateworks/gw_ventana/gw_ventana_spl.c | 189 ++++++-----
 board/gateworks/gw_ventana/ventana_eeprom.h |   1 +
 configs/cm_fx6_defconfig                    |   4 +
 configs/mx6dlsabresd_defconfig              |   2 +-
 doc/README.imximage                         |   2 +-
 drivers/block/dwc_ahsata.c                  |  17 +
 drivers/net/fec_mxc.c                       |  42 ++-
 drivers/pci/pci.c                           |   4 +
 drivers/pci/pcie_imx.c                      |  40 ++-
 drivers/serial/serial_lpuart.c              |  19 +-
 include/configs/cm_fx6.h                    | 290 +++++++++++++++++
 include/configs/cm_t335.h                   |   1 +
 include/configs/cm_t35.h                    |   1 +
 include/configs/cm_t54.h                    |   1 +
 include/configs/gw_ventana.h                |   1 +
 include/configs/mx6qarm2.h                  |   2 +
 include/configs/mx6qsabreauto.h             |   3 -
 include/configs/mx6slevk.h                  |   2 +
 include/configs/mx6sxsabresd.h              |  10 +
 include/configs/nitrogen6x.h                |   6 +-
 include/pci.h                               |   7 +
 include/sata.h                              |   1 +
 tools/imximage.c                            |   7 +
 tools/imximage.h                            |   2 +-
 48 files changed, 2140 insertions(+), 280 deletions(-)
 delete mode 100644 arch/arm/dts/imx6q-sabreauto.dts
 create mode 100644 board/compulab/cm_fx6/Kconfig
 create mode 100644 board/compulab/cm_fx6/MAINTAINERS
 create mode 100644 board/compulab/cm_fx6/Makefile
 create mode 100644 board/compulab/cm_fx6/cm_fx6.c
 create mode 100644 board/compulab/cm_fx6/common.c
 create mode 100644 board/compulab/cm_fx6/common.h
 create mode 100644 board/compulab/cm_fx6/imximage.cfg
 create mode 100644 board/compulab/cm_fx6/spl.c
 create mode 100644 board/freescale/mx6sabresd/mx6dlsabresd.cfg
 create mode 100644 configs/cm_fx6_defconfig
 create mode 100644 include/configs/cm_fx6.h

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2014-08-20 14:13 Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2014-08-20 14:13 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !

The following changes since commit 1899fac925eda817e12234aef3d01d354788662e:

  Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'
(2014-08-09 16:48:34 +0200)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to d145878d59c80a44d8c6e6d606b898ab87d205ee:

  mx6sxsabresd: Add Ethernet support (2014-08-20 13:15:23 +0200)

----------------------------------------------------------------
Fabio Estevam (18):
      mx6: Add support for the mx6solox variant
      mx6sx: Add pin definitions
      mx6: clock: Do not enable sata and ipu clocks
      mx6sx: Add initial support for mx6sxsabresd board
      mx6: soc: Do not apply the PFD erratum for mx6solox
      mx6sxsabresd: Add PFUZE100 PMIC support
      mx6: Remove duplication of iomuxc structure
      mx6: Adjust the GPR offset for mx6solox
      mx6: imx-regs: Remove unused 'omux' field from iomux struct
      mx6: crm_regs: Fix CDCDR_SPDIF0_CLK_PODF mask and offset
      mx6: crm_regs: Fix MXC_CCM_CLPCR_WB_PER_AT_LPM definition
      mx6: crm_regs: Fix MXC_CCM_CIMR_MASK_PERIPH2_CLK_SEL_LOADED
      pmic: pmic_pfuze100: Use a shorter name for PMIC name
      mx31pdk: Change maintainer
      mx6sxsabresd: Update DDR initialization
      mx6sxsabresd: Convert to the new Kconfig style
      mx6sx: Adjust enable_fec_anatop_clock() for mx6solox
      mx6sxsabresd: Add Ethernet support

Gabriel Huau (1):
      mx6: add support of multi-processor command

Heiko Schocher (6):
      imx6: add gpr2 usb_otg_id iomux select control define
      i.MX6: define struct pwm_regs and PWMCR_* defines
      pwm, imx6: add support for pwm modul on imx6
      i.MX6: add enable_spi_clk()
      spi: add config option to enable the WP pin function on st micron
flashes
      arm, imx6: add aristainetos board

Iain Paton (2):
      embestmx6boards: convert to generic board
      embest/mx6boards: only toggle eMMC usdhc3 RST line on MarSboard

Magnus Lilja (1):
      i.MX31 PDK: Enable generic board for i.MX31 PDK

Marek Vasut (6):
      arm: mxs: Scrub useless ifdef
      arm: m53evk: Fix RTC bus number
      ARM: mx5: Fix CHSCCDR name
      ARM: mx6: Prevent overflow in DRAM size detection
      ARM: mx6: Handle the MMDCx_MDCTL COL field caprices
      ARM: mx6: Enable Thumb build for SPL

Markus Niebel (1):
      Add TQ Systems TQMa6 board support

Stefano Babic (4):
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot-arm
      Merge branch 'master' of git://git.denx.de/u-boot-arm
      Update aristainetos board to Kconfig

Tim Harvey (11):
      pci: mx6: fix occasional link failures
      imx: ventana: set dynamic env var for flash layout
      imx: ventana: remove caam disable per eeprom bit
      imx: ventana: add appropriate delay following GSC i2c write
      imx: ventana: add video enable gpio pinmux for GW54xx
      imx: ventana: add missing crlf to print
      imx: ventana: configure i2c_dis# pin properly for gw53xx
      imx: ventana: enable SION bit on gpio outputs
      imx: ventana: add iomux for PCISKT_WDIS# gpio
      imx: ventana: leave PCI reset de-asserted if PCI enabled
      imx: ventana: add econfig command

 README                                      |   15 +
 arch/arm/Kconfig                            |    8 +
 arch/arm/cpu/armv7/mx6/Makefile             |    1 +
 arch/arm/cpu/armv7/mx6/clock.c              |   51 ++-
 arch/arm/cpu/armv7/mx6/ddr.c                |    8 +-
 arch/arm/cpu/armv7/mx6/mp.c                 |   87 ++++++
 arch/arm/cpu/armv7/mx6/soc.c                |   36 +++
 arch/arm/imx-common/cpu.c                   |    7 +
 arch/arm/imx-common/sata.c                  |    3 +-
 arch/arm/include/asm/arch-imx/cpu.h         |    3 +-
 arch/arm/include/asm/arch-mx5/crm_regs.h    |    2 +-
 arch/arm/include/asm/arch-mx6/clock.h       |    1 +
 arch/arm/include/asm/arch-mx6/crm_regs.h    |  179 ++++++++++-
 arch/arm/include/asm/arch-mx6/imx-regs.h    |  168 +++++++++-
 arch/arm/include/asm/arch-mx6/iomux.h       |   10 +
 arch/arm/include/asm/arch-mx6/mx6-ddr.h     |    4 +
 arch/arm/include/asm/arch-mx6/mx6-pins.h    |    2 +
 arch/arm/include/asm/arch-mx6/mx6sx-ddr.h   |   45 +++
 arch/arm/include/asm/arch-mx6/mx6sx_pins.h  | 1675
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx6/sys_proto.h   |    1 +
 board/aristainetos/Kconfig                  |   19 ++
 board/aristainetos/MAINTAINERS              |    6 +
 board/aristainetos/Makefile                 |    9 +
 board/aristainetos/aristainetos.c           |  519
+++++++++++++++++++++++++++++++
 board/aristainetos/aristainetos.cfg         |   33 ++
 board/aristainetos/clocks.cfg               |   24 ++
 board/aristainetos/ddr-setup.cfg            |   61 ++++
 board/aristainetos/mt41j128M.cfg            |   70 +++++
 board/boundary/nitrogen6x/nitrogen6x.c      |    3 +-
 board/embest/mx6boards/mx6boards.c          |    1 +
 board/freescale/mx31pdk/MAINTAINERS         |    2 +-
 board/freescale/mx6sabresd/mx6sabresd.c     |    2 +-
 board/freescale/mx6slevk/mx6slevk.c         |    3 +-
 board/freescale/mx6sxsabresd/Kconfig        |   23 ++
 board/freescale/mx6sxsabresd/MAINTAINERS    |    6 +
 board/freescale/mx6sxsabresd/Makefile       |    6 +
 board/freescale/mx6sxsabresd/imximage.cfg   |  132 ++++++++
 board/freescale/mx6sxsabresd/mx6sxsabresd.c |  295 ++++++++++++++++++
 board/gateworks/gw_ventana/eeprom.c         |  168 +++++++++-
 board/gateworks/gw_ventana/gsc.c            |    2 +-
 board/gateworks/gw_ventana/gw_ventana.c     |  271 +++++++---------
 board/gateworks/gw_ventana/ventana_eeprom.h |   11 +
 board/solidrun/hummingboard/hummingboard.c  |    3 +-
 board/tqc/tqma6/tqma6.c                     |  262 ++++++++++++++++
 board/tqc/tqma6/tqma6_bb.h                  |   30 ++
 board/tqc/tqma6/tqma6_mba6.c                |  361 +++++++++++++++++++++
 board/tqc/tqma6/tqma6q.cfg                  |  125 ++++++++
 board/tqc/tqma6/tqma6s.cfg                  |  125 ++++++++
 common/board_f.c                            |    8 +-
 configs/aristainetos_defconfig              |    3 +
 configs/mx6sxsabresd_defconfig              |    3 +
 drivers/Makefile                            |    1 +
 drivers/mtd/spi/sf_internal.h               |    4 +
 drivers/mtd/spi/sf_probe.c                  |   30 ++
 drivers/pci/pcie_imx.c                      |    8 +-
 drivers/power/pmic/pmic_pfuze100.c          |    2 +-
 drivers/pwm/Makefile                        |   13 +
 drivers/pwm/pwm-imx-util.c                  |   73 +++++
 drivers/pwm/pwm-imx-util.h                  |   16 +
 drivers/pwm/pwm-imx.c                       |   59 ++++
 include/configs/aristainetos.h              |  325 +++++++++++++++++++
 include/configs/embestmx6boards.h           |    2 +
 include/configs/gw_ventana.h                |    5 +-
 include/configs/imx6_spl.h                  |    1 +
 include/configs/m53evk.h                    |    2 +-
 include/configs/mx31pdk.h                   |    2 +
 include/configs/mx6_common.h                |    2 +
 include/configs/mx6sxsabresd.h              |  216 +++++++++++++
 include/configs/mxs.h                       |    2 -
 include/configs/tqma6.h                     |  483
++++++++++++++++++++++++++++
 73 files changed, 6001 insertions(+), 205 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/mx6/mp.c
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6sx-ddr.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6sx_pins.h
 create mode 100644 board/aristainetos/Kconfig
 create mode 100644 board/aristainetos/MAINTAINERS
 create mode 100644 board/aristainetos/Makefile
 create mode 100644 board/aristainetos/aristainetos.c
 create mode 100644 board/aristainetos/aristainetos.cfg
 create mode 100644 board/aristainetos/clocks.cfg
 create mode 100644 board/aristainetos/ddr-setup.cfg
 create mode 100644 board/aristainetos/mt41j128M.cfg
 create mode 100644 board/freescale/mx6sxsabresd/Kconfig
 create mode 100644 board/freescale/mx6sxsabresd/MAINTAINERS
 create mode 100644 board/freescale/mx6sxsabresd/Makefile
 create mode 100644 board/freescale/mx6sxsabresd/imximage.cfg
 create mode 100644 board/freescale/mx6sxsabresd/mx6sxsabresd.c
 create mode 100644 board/tqc/tqma6/Makefile
 create mode 100644 board/tqc/tqma6/README
 create mode 100644 board/tqc/tqma6/clocks.cfg
 create mode 100644 board/tqc/tqma6/tqma6.c
 create mode 100644 board/tqc/tqma6/tqma6_bb.h
 create mode 100644 board/tqc/tqma6/tqma6_mba6.c
 create mode 100644 board/tqc/tqma6/tqma6q.cfg
 create mode 100644 board/tqc/tqma6/tqma6s.cfg
 create mode 100644 configs/aristainetos_defconfig
 create mode 100644 configs/mx6sxsabresd_defconfig
 create mode 100644 drivers/pwm/Makefile
 create mode 100644 drivers/pwm/pwm-imx-util.c
 create mode 100644 drivers/pwm/pwm-imx-util.h
 create mode 100644 drivers/pwm/pwm-imx.c
 create mode 100644 include/configs/aristainetos.h
 create mode 100644 include/configs/mx6sxsabresd.h
 create mode 100644 include/configs/tqma6.h

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
  2014-07-10 13:28 Stefano Babic
@ 2014-07-11 18:54 ` Tom Rini
  0 siblings, 0 replies; 307+ messages in thread
From: Tom Rini @ 2014-07-11 18:54 UTC (permalink / raw)
  To: u-boot

On Thu, Jul 10, 2014 at 03:28:59PM +0200, Stefano Babic wrote:

> Hi Tom,
> 
> just a small fix to get for the release. Please pull from u-boot-imx,
> thanks !
> 
> The following changes since commit 157f45da91b306d71dbf3a51325352dc11bf16d1:
> 
>   mx6: soc: Update the comments of set_ldo_voltage() (2014-07-09
> 15:10:10 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to e153333eeb50021fb3a730a3216c1968e7710999:
> 
>   i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
> (2014-07-10 15:23:56 +0200)
> 
> ----------------------------------------------------------------
> Eric Nelson (1):
>       i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
> 
>  arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140711/6e1fb81a/attachment.pgp>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] Please pull u-boot-imx
@ 2014-07-10 13:28 Stefano Babic
  2014-07-11 18:54 ` Tom Rini
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-07-10 13:28 UTC (permalink / raw)
  To: u-boot

Hi Tom,

just a small fix to get for the release. Please pull from u-boot-imx,
thanks !

The following changes since commit 157f45da91b306d71dbf3a51325352dc11bf16d1:

  mx6: soc: Update the comments of set_ldo_voltage() (2014-07-09
15:10:10 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to e153333eeb50021fb3a730a3216c1968e7710999:

  i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
(2014-07-10 15:23:56 +0200)

----------------------------------------------------------------
Eric Nelson (1):
      i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10

 arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-06-26  8:25 [U-Boot] [PULL] : " Stefano Babic
@ 2014-07-01  5:51 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-07-01  5:51 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Thu, 26 Jun 2014 10:25:19 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 49692c5f517d8e44ed9db0de778728fe7d2a300c:
> 
>   net/designware: Make DMA burst length configurable and reduce by
> default (2014-05-25 17:23:58 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 3f4c01d9f9d38e383f004dcd06c0d5661f2a57e0:
> 
>   mx25pdk: Remove CONFIG_SYS_GENERIC_BOARD (2014-06-26 10:17:19 +0200)
> 
> ----------------------------------------------------------------
> Eric Nelson (1):
>       serial_mxc: disable new features of autobaud detection
> 
> Fabio Estevam (10):
>       mx6sabreauto: Add the mx6dual-lite variant
>       mx6sabred: Add PFUZE100 PMIC support
>       mx25pdk: Add generic board support
>       mx6: Fix definition of IOMUXC_GPR12_DEVICE_TYPE_RC
>       embestmx6boards: Fix CONFIG_CONSOLE_DEV
>       embestmx6boards: Fix the dtb file name for riotboard
>       mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selected
>       mx28evk: Add a target for SPI NOR boot
>       mx28evk: Add documentation on how to boot from SPI NOR
>       mx25pdk: Remove CONFIG_SYS_GENERIC_BOARD
> 
> Marek Vasut (1):
>       arm: mx5: Enable CONFIG_SYS_GENERIC_BOARD on M53EVK
> 
> Masahiro Yamada (1):
>       spl: consolidate arch/arm/include/asm/arch-*/spl.h
> 
> Shawn Guo (1):
>       mx6: drop ARM errata 742230
> 
> Stefano Babic (3):
>       MX25: fix build due to missing sys_proto.h
>       imx: correct HAB status for new chip TO
>       vf610: fix build due to missing sys_proto.h
> 
> Tim Harvey (12):
>       spl: nand: add support for mxs nand
>       mx6: add common SPL configuration
>       mx6: add boot device support for SPL
>       imx: add comments and remove unused struct fields
>       mx6: add structs for mmdc and ddr iomux registers
>       mx6: add mmdc configuration for MX6Q/MX6DL
>       imx: iomux: add macros to setup iomux for multiple SoC types
>       imx: ventana: split read_eeprom into standalone file
>       imx: ventana: auto-configure for IMX6Q vs IMX6DL
>       imx: ventana: switch to SPL
>       dwc_ahsata: return failure for MX6 if not IMX6Q/IMX6D
>       imx: sata: return failure if not IMX6Q/IMX6D
> 
>  arch/arm/cpu/arm720t/tegra-common/spl.c     |   2 +-
>  arch/arm/cpu/armv7/mx6/Makefile             |   1 +
>  arch/arm/cpu/armv7/mx6/ddr.c                | 490 +++++++++++++++++++++++
>  arch/arm/cpu/armv7/mx6/hab.c                |  73 +++-
>  arch/arm/imx-common/Makefile                |   1 +
>  arch/arm/imx-common/cpu.c                   |  16 +-
>  arch/arm/imx-common/iomux-v3.c              |  18 +-
>  arch/arm/imx-common/sata.c                  |   7 +-
>  arch/arm/imx-common/spl.c                   |  81 ++++
>  arch/arm/include/asm/arch-at91/spl.h        |  24 --
>  arch/arm/include/asm/arch-davinci/spl.h     |  16 -
>  arch/arm/include/asm/arch-mx35/spl.h        |  22 -
>  arch/arm/include/asm/arch-mx5/spl.h         |  13 -
>  arch/arm/include/asm/arch-mx6/hab.h         |  17 +-
>  arch/arm/include/asm/arch-mx6/imx-regs.h    |   2 +
>  arch/arm/include/asm/arch-mx6/iomux.h       |   2 +-
>  arch/arm/include/asm/arch-mx6/mx6-ddr.h     | 231 +++++++++++
>  arch/arm/include/asm/arch-mx6/sys_proto.h   |   4 +-
>  arch/arm/include/asm/arch-tegra114/spl.h    |  22 -
>  arch/arm/include/asm/arch-tegra124/spl.h    |  13 -
>  arch/arm/include/asm/arch-tegra20/spl.h     |  12 -
>  arch/arm/include/asm/arch-tegra30/spl.h     |  12 -
>  arch/arm/include/asm/imx-common/iomux-v3.h  |  25 ++
>  arch/arm/include/asm/spl.h                  |  20 +
>  board/denx/m53evk/m53evk.c                  |   2 +-
>  board/freescale/mx28evk/README              |  22 +-
>  board/freescale/mx6qsabreauto/mx6dl.cfg     | 130 ++++++
>  board/freescale/mx6sabresd/mx6sabresd.c     |  84 ++++
>  board/gateworks/gw_ventana/Makefile         |   3 +-
>  board/gateworks/gw_ventana/README           |  92 +++--
>  board/gateworks/gw_ventana/eeprom.c         |  89 +++++
>  board/gateworks/gw_ventana/gw_ventana.c     | 597
> +++++++++++++++-------------
>  board/gateworks/gw_ventana/gw_ventana.cfg   |  15 -
>  board/gateworks/gw_ventana/gw_ventana_spl.c | 419 +++++++++++++++++++
>  board/gateworks/gw_ventana/ventana_eeprom.h |  11 +
>  boards.cfg                                  |   8 +-
>  doc/README.mxs                              |  26 ++
>  drivers/block/dwc_ahsata.c                  |   5 +
>  drivers/mtd/nand/Makefile                   |   1 +
>  drivers/mtd/nand/mxs_nand_spl.c             | 231 +++++++++++
>  drivers/serial/serial_mxc.c                 |   4 +-
>  include/configs/embestmx6boards.h           |   4 +-
>  include/configs/gw_ventana.h                |  11 +
>  include/configs/imx6_spl.h                  |  71 ++++
>  include/configs/m53evk.h                    |   1 +
>  include/configs/mx28evk.h                   |   5 +-
>  include/configs/mx6_common.h                |   1 -
>  include/configs/mx6qsabreauto.h             |   4 +
>  include/configs/mx6sabresd.h                |  12 +
>  include/power/pfuze100_pmic.h               |   4 +
>  50 files changed, 2473 insertions(+), 503 deletions(-)
>  create mode 100644 arch/arm/cpu/armv7/mx6/ddr.c
>  create mode 100644 arch/arm/imx-common/spl.c
>  delete mode 100644 arch/arm/include/asm/arch-at91/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-davinci/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-mx35/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-mx5/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-tegra114/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-tegra124/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-tegra20/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-tegra30/spl.h
>  create mode 100644 board/freescale/mx6qsabreauto/mx6dl.cfg
>  create mode 100644 board/gateworks/gw_ventana/eeprom.c
>  create mode 100644 board/gateworks/gw_ventana/gw_ventana_spl.c
>  create mode 100644 drivers/mtd/nand/mxs_nand_spl.c
>  create mode 100644 include/configs/imx6_spl.h
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2014-06-26  8:25 Stefano Babic
  2014-07-01  5:51 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-06-26  8:25 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !

The following changes since commit 49692c5f517d8e44ed9db0de778728fe7d2a300c:

  net/designware: Make DMA burst length configurable and reduce by
default (2014-05-25 17:23:58 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 3f4c01d9f9d38e383f004dcd06c0d5661f2a57e0:

  mx25pdk: Remove CONFIG_SYS_GENERIC_BOARD (2014-06-26 10:17:19 +0200)

----------------------------------------------------------------
Eric Nelson (1):
      serial_mxc: disable new features of autobaud detection

Fabio Estevam (10):
      mx6sabreauto: Add the mx6dual-lite variant
      mx6sabred: Add PFUZE100 PMIC support
      mx25pdk: Add generic board support
      mx6: Fix definition of IOMUXC_GPR12_DEVICE_TYPE_RC
      embestmx6boards: Fix CONFIG_CONSOLE_DEV
      embestmx6boards: Fix the dtb file name for riotboard
      mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selected
      mx28evk: Add a target for SPI NOR boot
      mx28evk: Add documentation on how to boot from SPI NOR
      mx25pdk: Remove CONFIG_SYS_GENERIC_BOARD

Marek Vasut (1):
      arm: mx5: Enable CONFIG_SYS_GENERIC_BOARD on M53EVK

Masahiro Yamada (1):
      spl: consolidate arch/arm/include/asm/arch-*/spl.h

Shawn Guo (1):
      mx6: drop ARM errata 742230

Stefano Babic (3):
      MX25: fix build due to missing sys_proto.h
      imx: correct HAB status for new chip TO
      vf610: fix build due to missing sys_proto.h

Tim Harvey (12):
      spl: nand: add support for mxs nand
      mx6: add common SPL configuration
      mx6: add boot device support for SPL
      imx: add comments and remove unused struct fields
      mx6: add structs for mmdc and ddr iomux registers
      mx6: add mmdc configuration for MX6Q/MX6DL
      imx: iomux: add macros to setup iomux for multiple SoC types
      imx: ventana: split read_eeprom into standalone file
      imx: ventana: auto-configure for IMX6Q vs IMX6DL
      imx: ventana: switch to SPL
      dwc_ahsata: return failure for MX6 if not IMX6Q/IMX6D
      imx: sata: return failure if not IMX6Q/IMX6D

 arch/arm/cpu/arm720t/tegra-common/spl.c     |   2 +-
 arch/arm/cpu/armv7/mx6/Makefile             |   1 +
 arch/arm/cpu/armv7/mx6/ddr.c                | 490 +++++++++++++++++++++++
 arch/arm/cpu/armv7/mx6/hab.c                |  73 +++-
 arch/arm/imx-common/Makefile                |   1 +
 arch/arm/imx-common/cpu.c                   |  16 +-
 arch/arm/imx-common/iomux-v3.c              |  18 +-
 arch/arm/imx-common/sata.c                  |   7 +-
 arch/arm/imx-common/spl.c                   |  81 ++++
 arch/arm/include/asm/arch-at91/spl.h        |  24 --
 arch/arm/include/asm/arch-davinci/spl.h     |  16 -
 arch/arm/include/asm/arch-mx35/spl.h        |  22 -
 arch/arm/include/asm/arch-mx5/spl.h         |  13 -
 arch/arm/include/asm/arch-mx6/hab.h         |  17 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h    |   2 +
 arch/arm/include/asm/arch-mx6/iomux.h       |   2 +-
 arch/arm/include/asm/arch-mx6/mx6-ddr.h     | 231 +++++++++++
 arch/arm/include/asm/arch-mx6/sys_proto.h   |   4 +-
 arch/arm/include/asm/arch-tegra114/spl.h    |  22 -
 arch/arm/include/asm/arch-tegra124/spl.h    |  13 -
 arch/arm/include/asm/arch-tegra20/spl.h     |  12 -
 arch/arm/include/asm/arch-tegra30/spl.h     |  12 -
 arch/arm/include/asm/imx-common/iomux-v3.h  |  25 ++
 arch/arm/include/asm/spl.h                  |  20 +
 board/denx/m53evk/m53evk.c                  |   2 +-
 board/freescale/mx28evk/README              |  22 +-
 board/freescale/mx6qsabreauto/mx6dl.cfg     | 130 ++++++
 board/freescale/mx6sabresd/mx6sabresd.c     |  84 ++++
 board/gateworks/gw_ventana/Makefile         |   3 +-
 board/gateworks/gw_ventana/README           |  92 +++--
 board/gateworks/gw_ventana/eeprom.c         |  89 +++++
 board/gateworks/gw_ventana/gw_ventana.c     | 597
+++++++++++++++-------------
 board/gateworks/gw_ventana/gw_ventana.cfg   |  15 -
 board/gateworks/gw_ventana/gw_ventana_spl.c | 419 +++++++++++++++++++
 board/gateworks/gw_ventana/ventana_eeprom.h |  11 +
 boards.cfg                                  |   8 +-
 doc/README.mxs                              |  26 ++
 drivers/block/dwc_ahsata.c                  |   5 +
 drivers/mtd/nand/Makefile                   |   1 +
 drivers/mtd/nand/mxs_nand_spl.c             | 231 +++++++++++
 drivers/serial/serial_mxc.c                 |   4 +-
 include/configs/embestmx6boards.h           |   4 +-
 include/configs/gw_ventana.h                |  11 +
 include/configs/imx6_spl.h                  |  71 ++++
 include/configs/m53evk.h                    |   1 +
 include/configs/mx28evk.h                   |   5 +-
 include/configs/mx6_common.h                |   1 -
 include/configs/mx6qsabreauto.h             |   4 +
 include/configs/mx6sabresd.h                |  12 +
 include/power/pfuze100_pmic.h               |   4 +
 50 files changed, 2473 insertions(+), 503 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/mx6/ddr.c
 create mode 100644 arch/arm/imx-common/spl.c
 delete mode 100644 arch/arm/include/asm/arch-at91/spl.h
 delete mode 100644 arch/arm/include/asm/arch-davinci/spl.h
 delete mode 100644 arch/arm/include/asm/arch-mx35/spl.h
 delete mode 100644 arch/arm/include/asm/arch-mx5/spl.h
 delete mode 100644 arch/arm/include/asm/arch-tegra114/spl.h
 delete mode 100644 arch/arm/include/asm/arch-tegra124/spl.h
 delete mode 100644 arch/arm/include/asm/arch-tegra20/spl.h
 delete mode 100644 arch/arm/include/asm/arch-tegra30/spl.h
 create mode 100644 board/freescale/mx6qsabreauto/mx6dl.cfg
 create mode 100644 board/gateworks/gw_ventana/eeprom.c
 create mode 100644 board/gateworks/gw_ventana/gw_ventana_spl.c
 create mode 100644 drivers/mtd/nand/mxs_nand_spl.c
 create mode 100644 include/configs/imx6_spl.h

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-06-25 13:16     ` Albert ARIBAUD
@ 2014-06-25 13:52       ` Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2014-06-25 13:52 UTC (permalink / raw)
  To: u-boot

Hi Albert,

On 25/06/2014 15:16, Albert ARIBAUD wrote:

> Thanks, I saw you have sent out a patch. I suggest you take it into the
> imx tree (possibly applying it where it ensures as few non-building
> commits as possible) then re-send a PR.

Agree, I am doing it.

Regards,
Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-06-25 10:05   ` Stefano Babic
@ 2014-06-25 13:16     ` Albert ARIBAUD
  2014-06-25 13:52       ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Albert ARIBAUD @ 2014-06-25 13:16 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Wed, 25 Jun 2014 12:05:11 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> On 25/06/2014 11:48, Albert ARIBAUD wrote:
> 
> > 
> > This breaks build on vf610twr.
> > 
> > Git bisect shows the issue to be in commit 5bf497e3 (cc:ing author)
> > 
> > The error seems to be trivial:
> > 
> > arch/arm/imx-common/iomux-v3.c:14:32: fatal error:
> > asm/arch/sys_proto.h: No such file or directory
> > 
> 
> I check it, there was the same issue for mx25, I'll fix it.

Thanks, I saw you have sent out a patch. I suggest you take it into the
imx tree (possibly applying it where it ensures as few non-building
commits as possible) then re-send a PR.

> Best regards,
> Stefano

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-06-25  9:48 ` Albert ARIBAUD
@ 2014-06-25 10:05   ` Stefano Babic
  2014-06-25 13:16     ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-06-25 10:05 UTC (permalink / raw)
  To: u-boot

Hi Albert,

On 25/06/2014 11:48, Albert ARIBAUD wrote:

> 
> This breaks build on vf610twr.
> 
> Git bisect shows the issue to be in commit 5bf497e3 (cc:ing author)
> 
> The error seems to be trivial:
> 
> arch/arm/imx-common/iomux-v3.c:14:32: fatal error:
> asm/arch/sys_proto.h: No such file or directory
> 

I check it, there was the same issue for mx25, I'll fix it.

Best regards,
Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-06-17 17:03 Stefano Babic
@ 2014-06-25  9:48 ` Albert ARIBAUD
  2014-06-25 10:05   ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Albert ARIBAUD @ 2014-06-25  9:48 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Tue, 17 Jun 2014 19:03:05 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 49692c5f517d8e44ed9db0de778728fe7d2a300c:
> 
>   net/designware: Make DMA burst length configurable and reduce by
> default (2014-05-25 17:23:58 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to f2f07e8553185022b16adb91581700c86dc3a09a:
> 
>   imx: correct HAB status for new chip TO (2014-06-17 17:45:09 +0200)
> 
> ----------------------------------------------------------------
> Eric Nelson (1):
>       serial_mxc: disable new features of autobaud detection
> 
> Fabio Estevam (9):
>       mx6sabreauto: Add the mx6dual-lite variant
>       mx6sabred: Add PFUZE100 PMIC support
>       mx25pdk: Add generic board support
>       mx6: Fix definition of IOMUXC_GPR12_DEVICE_TYPE_RC
>       embestmx6boards: Fix CONFIG_CONSOLE_DEV
>       embestmx6boards: Fix the dtb file name for riotboard
>       mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selected
>       mx28evk: Add a target for SPI NOR boot
>       mx28evk: Add documentation on how to boot from SPI NOR
> 
> Marek Vasut (1):
>       arm: mx5: Enable CONFIG_SYS_GENERIC_BOARD on M53EVK
> 
> Masahiro Yamada (1):
>       spl: consolidate arch/arm/include/asm/arch-*/spl.h
> 
> Shawn Guo (1):
>       mx6: drop ARM errata 742230
> 
> Stefano Babic (2):
>       MX25: fix build due to missing sys_proto.h
>       imx: correct HAB status for new chip TO
> 
> Tim Harvey (12):
>       spl: nand: add support for mxs nand
>       mx6: add common SPL configuration
>       mx6: add boot device support for SPL
>       imx: add comments and remove unused struct fields
>       mx6: add structs for mmdc and ddr iomux registers
>       mx6: add mmdc configuration for MX6Q/MX6DL
>       imx: iomux: add macros to setup iomux for multiple SoC types
>       imx: ventana: split read_eeprom into standalone file
>       imx: ventana: auto-configure for IMX6Q vs IMX6DL
>       imx: ventana: switch to SPL
>       dwc_ahsata: return failure for MX6 if not IMX6Q/IMX6D
>       imx: sata: return failure if not IMX6Q/IMX6D
> 
>  arch/arm/cpu/arm720t/tegra-common/spl.c     |   2 +-
>  arch/arm/cpu/armv7/mx6/Makefile             |   1 +
>  arch/arm/cpu/armv7/mx6/ddr.c                | 490
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/cpu/armv7/mx6/hab.c                |  73 +++++++++-
>  arch/arm/imx-common/Makefile                |   1 +
>  arch/arm/imx-common/cpu.c                   |  16 +--
>  arch/arm/imx-common/iomux-v3.c              |  18 ++-
>  arch/arm/imx-common/sata.c                  |   7 +-
>  arch/arm/imx-common/spl.c                   |  81 +++++++++++
>  arch/arm/include/asm/arch-at91/spl.h        |  24 ----
>  arch/arm/include/asm/arch-davinci/spl.h     |  16 ---
>  arch/arm/include/asm/arch-mx35/spl.h        |  22 ---
>  arch/arm/include/asm/arch-mx5/spl.h         |  13 --
>  arch/arm/include/asm/arch-mx6/hab.h         |  17 ++-
>  arch/arm/include/asm/arch-mx6/imx-regs.h    |   2 +
>  arch/arm/include/asm/arch-mx6/iomux.h       |   2 +-
>  arch/arm/include/asm/arch-mx6/mx6-ddr.h     | 231
> ++++++++++++++++++++++++++++++
>  arch/arm/include/asm/arch-mx6/sys_proto.h   |   4 +-
>  arch/arm/include/asm/arch-tegra114/spl.h    |  22 ---
>  arch/arm/include/asm/arch-tegra124/spl.h    |  13 --
>  arch/arm/include/asm/arch-tegra20/spl.h     |  12 --
>  arch/arm/include/asm/arch-tegra30/spl.h     |  12 --
>  arch/arm/include/asm/imx-common/iomux-v3.h  |  25 ++++
>  arch/arm/include/asm/spl.h                  |  20 +++
>  board/denx/m53evk/m53evk.c                  |   2 +-
>  board/freescale/mx28evk/README              |  22 ++-
>  board/freescale/mx6qsabreauto/mx6dl.cfg     | 130 +++++++++++++++++
>  board/freescale/mx6sabresd/mx6sabresd.c     |  84 +++++++++++
>  board/gateworks/gw_ventana/Makefile         |   3 +-
>  board/gateworks/gw_ventana/README           |  92 +++++++-----
>  board/gateworks/gw_ventana/eeprom.c         |  89 ++++++++++++
>  board/gateworks/gw_ventana/gw_ventana.c     | 597
> +++++++++++++++++++++++++++++++++++++++++-----------------------------------
>  board/gateworks/gw_ventana/gw_ventana.cfg   |  15 --
>  board/gateworks/gw_ventana/gw_ventana_spl.c | 419
> +++++++++++++++++++++++++++++++++++++++++++++++++++++
>  board/gateworks/gw_ventana/ventana_eeprom.h |  11 ++
>  boards.cfg                                  |   8 +-
>  doc/README.mxs                              |  26 ++++
>  drivers/block/dwc_ahsata.c                  |   5 +
>  drivers/mtd/nand/Makefile                   |   1 +
>  drivers/mtd/nand/mxs_nand_spl.c             | 231
> ++++++++++++++++++++++++++++++
>  drivers/serial/serial_mxc.c                 |   4 +-
>  include/configs/embestmx6boards.h           |   4 +-
>  include/configs/gw_ventana.h                |  11 ++
>  include/configs/imx6_spl.h                  |  71 +++++++++
>  include/configs/m53evk.h                    |   1 +
>  include/configs/mx25pdk.h                   |   2 +
>  include/configs/mx28evk.h                   |   5 +-
>  include/configs/mx6_common.h                |   1 -
>  include/configs/mx6qsabreauto.h             |   4 +
>  include/configs/mx6sabresd.h                |  12 ++
>  include/power/pfuze100_pmic.h               |   4 +
>  51 files changed, 2475 insertions(+), 503 deletions(-)
>  create mode 100644 arch/arm/cpu/armv7/mx6/ddr.c
>  create mode 100644 arch/arm/imx-common/spl.c
>  delete mode 100644 arch/arm/include/asm/arch-at91/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-davinci/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-mx35/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-mx5/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-tegra114/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-tegra124/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-tegra20/spl.h
>  delete mode 100644 arch/arm/include/asm/arch-tegra30/spl.h
>  create mode 100644 board/freescale/mx6qsabreauto/mx6dl.cfg
>  create mode 100644 board/gateworks/gw_ventana/eeprom.c
>  create mode 100644 board/gateworks/gw_ventana/gw_ventana_spl.c
>  create mode 100644 drivers/mtd/nand/mxs_nand_spl.c
>  create mode 100644 include/configs/imx6_spl.h

This breaks build on vf610twr.

Git bisect shows the issue to be in commit 5bf497e3 (cc:ing author)

The error seems to be trivial:

arch/arm/imx-common/iomux-v3.c:14:32: fatal error:
asm/arch/sys_proto.h: No such file or directory

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2014-06-17 17:03 Stefano Babic
  2014-06-25  9:48 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-06-17 17:03 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !

The following changes since commit 49692c5f517d8e44ed9db0de778728fe7d2a300c:

  net/designware: Make DMA burst length configurable and reduce by
default (2014-05-25 17:23:58 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to f2f07e8553185022b16adb91581700c86dc3a09a:

  imx: correct HAB status for new chip TO (2014-06-17 17:45:09 +0200)

----------------------------------------------------------------
Eric Nelson (1):
      serial_mxc: disable new features of autobaud detection

Fabio Estevam (9):
      mx6sabreauto: Add the mx6dual-lite variant
      mx6sabred: Add PFUZE100 PMIC support
      mx25pdk: Add generic board support
      mx6: Fix definition of IOMUXC_GPR12_DEVICE_TYPE_RC
      embestmx6boards: Fix CONFIG_CONSOLE_DEV
      embestmx6boards: Fix the dtb file name for riotboard
      mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selected
      mx28evk: Add a target for SPI NOR boot
      mx28evk: Add documentation on how to boot from SPI NOR

Marek Vasut (1):
      arm: mx5: Enable CONFIG_SYS_GENERIC_BOARD on M53EVK

Masahiro Yamada (1):
      spl: consolidate arch/arm/include/asm/arch-*/spl.h

Shawn Guo (1):
      mx6: drop ARM errata 742230

Stefano Babic (2):
      MX25: fix build due to missing sys_proto.h
      imx: correct HAB status for new chip TO

Tim Harvey (12):
      spl: nand: add support for mxs nand
      mx6: add common SPL configuration
      mx6: add boot device support for SPL
      imx: add comments and remove unused struct fields
      mx6: add structs for mmdc and ddr iomux registers
      mx6: add mmdc configuration for MX6Q/MX6DL
      imx: iomux: add macros to setup iomux for multiple SoC types
      imx: ventana: split read_eeprom into standalone file
      imx: ventana: auto-configure for IMX6Q vs IMX6DL
      imx: ventana: switch to SPL
      dwc_ahsata: return failure for MX6 if not IMX6Q/IMX6D
      imx: sata: return failure if not IMX6Q/IMX6D

 arch/arm/cpu/arm720t/tegra-common/spl.c     |   2 +-
 arch/arm/cpu/armv7/mx6/Makefile             |   1 +
 arch/arm/cpu/armv7/mx6/ddr.c                | 490
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/mx6/hab.c                |  73 +++++++++-
 arch/arm/imx-common/Makefile                |   1 +
 arch/arm/imx-common/cpu.c                   |  16 +--
 arch/arm/imx-common/iomux-v3.c              |  18 ++-
 arch/arm/imx-common/sata.c                  |   7 +-
 arch/arm/imx-common/spl.c                   |  81 +++++++++++
 arch/arm/include/asm/arch-at91/spl.h        |  24 ----
 arch/arm/include/asm/arch-davinci/spl.h     |  16 ---
 arch/arm/include/asm/arch-mx35/spl.h        |  22 ---
 arch/arm/include/asm/arch-mx5/spl.h         |  13 --
 arch/arm/include/asm/arch-mx6/hab.h         |  17 ++-
 arch/arm/include/asm/arch-mx6/imx-regs.h    |   2 +
 arch/arm/include/asm/arch-mx6/iomux.h       |   2 +-
 arch/arm/include/asm/arch-mx6/mx6-ddr.h     | 231
++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx6/sys_proto.h   |   4 +-
 arch/arm/include/asm/arch-tegra114/spl.h    |  22 ---
 arch/arm/include/asm/arch-tegra124/spl.h    |  13 --
 arch/arm/include/asm/arch-tegra20/spl.h     |  12 --
 arch/arm/include/asm/arch-tegra30/spl.h     |  12 --
 arch/arm/include/asm/imx-common/iomux-v3.h  |  25 ++++
 arch/arm/include/asm/spl.h                  |  20 +++
 board/denx/m53evk/m53evk.c                  |   2 +-
 board/freescale/mx28evk/README              |  22 ++-
 board/freescale/mx6qsabreauto/mx6dl.cfg     | 130 +++++++++++++++++
 board/freescale/mx6sabresd/mx6sabresd.c     |  84 +++++++++++
 board/gateworks/gw_ventana/Makefile         |   3 +-
 board/gateworks/gw_ventana/README           |  92 +++++++-----
 board/gateworks/gw_ventana/eeprom.c         |  89 ++++++++++++
 board/gateworks/gw_ventana/gw_ventana.c     | 597
+++++++++++++++++++++++++++++++++++++++++-----------------------------------
 board/gateworks/gw_ventana/gw_ventana.cfg   |  15 --
 board/gateworks/gw_ventana/gw_ventana_spl.c | 419
+++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/gateworks/gw_ventana/ventana_eeprom.h |  11 ++
 boards.cfg                                  |   8 +-
 doc/README.mxs                              |  26 ++++
 drivers/block/dwc_ahsata.c                  |   5 +
 drivers/mtd/nand/Makefile                   |   1 +
 drivers/mtd/nand/mxs_nand_spl.c             | 231
++++++++++++++++++++++++++++++
 drivers/serial/serial_mxc.c                 |   4 +-
 include/configs/embestmx6boards.h           |   4 +-
 include/configs/gw_ventana.h                |  11 ++
 include/configs/imx6_spl.h                  |  71 +++++++++
 include/configs/m53evk.h                    |   1 +
 include/configs/mx25pdk.h                   |   2 +
 include/configs/mx28evk.h                   |   5 +-
 include/configs/mx6_common.h                |   1 -
 include/configs/mx6qsabreauto.h             |   4 +
 include/configs/mx6sabresd.h                |  12 ++
 include/power/pfuze100_pmic.h               |   4 +
 51 files changed, 2475 insertions(+), 503 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/mx6/ddr.c
 create mode 100644 arch/arm/imx-common/spl.c
 delete mode 100644 arch/arm/include/asm/arch-at91/spl.h
 delete mode 100644 arch/arm/include/asm/arch-davinci/spl.h
 delete mode 100644 arch/arm/include/asm/arch-mx35/spl.h
 delete mode 100644 arch/arm/include/asm/arch-mx5/spl.h
 delete mode 100644 arch/arm/include/asm/arch-tegra114/spl.h
 delete mode 100644 arch/arm/include/asm/arch-tegra124/spl.h
 delete mode 100644 arch/arm/include/asm/arch-tegra20/spl.h
 delete mode 100644 arch/arm/include/asm/arch-tegra30/spl.h
 create mode 100644 board/freescale/mx6qsabreauto/mx6dl.cfg
 create mode 100644 board/gateworks/gw_ventana/eeprom.c
 create mode 100644 board/gateworks/gw_ventana/gw_ventana_spl.c
 create mode 100644 drivers/mtd/nand/mxs_nand_spl.c
 create mode 100644 include/configs/imx6_spl.h


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-05-15  9:02 Stefano Babic
@ 2014-05-16 17:35 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-05-16 17:35 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Thu, 15 May 2014 11:02:01 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit d2a3e911390f9fc4d8c0ee4b3c7fc75f4fd3fd19:
> 
>   Merge branch 'u-boot/master' (2014-05-09 11:50:14 +0200)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to e7f9350525d73233d4eaf1793f8fe618e9fd4910:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-05-15
> 10:27:32 +0200)
> 
> ----------------------------------------------------------------
> 
> Eric Benard (8):
>       imx-common: add board_video_skip
>       nitrogen6x: use common board_video_skip
>       mx6sabresd: use common board_video_skip
>       RiOTboard and MarSBoard: add new boards support
>       imx-common/video: add detect_hdmi
>       nitrogen6x: use common detect_hdmi
>       mx6sabresd: use common detect_hdmi
>       embest/mx6boards: use common detect_hdmi
> 
> Eric Nelson (1):
>       ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD
> 
> Fabio Estevam (11):
>       wandboard: Convert to generic board
>       mx53loco: Convert to generic board
>       mx6sabre_common: Convert to generic board
>       mx53ard: Convert to generic board
>       mx53smd: Convert to generic board
>       mx53evk: Convert to generic board
>       udoo: Convert to generic board
>       hummingboard: Convert to generic board
>       mx6slevk: Add SPI NOR flash support
>       nitrogen6x: Fix the PAD settings for the ECSPI chipselect
>       iomux-v3: Add support for mx6sl LVE bit
> 
> Marek Vasut (1):
>       arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD
> 
> Otavio Salvador (2):
>       wandboard: add Future Eletronics 7" WVGA LCD extension board
>       wandboard: Pass video kernel arguments for HDMI and LCD
> 
> Stefano Babic (3):
>       mx6: fix weird formatting in imx6q-sabreauto.dts
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
> 
> Thomas Diener (2):
>       imx25: Add new hardware registers
>       video: Add support for imx25 lcd controller
> 
> Tim Harvey (10):
>       ventana: fixed comments in eeprom header
>       ventana: remove redundant include
>       power: make pfuze100 be able to coexist with other pmics
>       ventana: use non-generic pfuze100 init
>       power: Add support for LTC3676 PMIC
>       ventana: Add support for the LTC3676 PMIC
>       imx6: ventana: fix system-serial dt property
>       imx: ventana: Convert to generic board
>       imx: ventana: add HDMI and LVDS display capability
>       nand: remove CONFIG_SYS_NAND_PAGE_SIZE
> 
>  arch/arm/dts/imx6q-sabreauto.dts            |  10 +-
>  arch/arm/imx-common/Makefile                |   1 +
>  arch/arm/imx-common/iomux-v3.c              |   8 +
>  arch/arm/imx-common/video.c                 |  65 ++++++++
>  arch/arm/include/asm/arch-mx25/imx-regs.h   | 175 ++++++++++++++++++++
>  arch/arm/include/asm/arch-mx6/mx6sl_pins.h  |   4 +
>  arch/arm/include/asm/imx-common/iomux-v3.h  |   5 +
>  arch/arm/include/asm/imx-common/video.h     |  24 +++
>  board/boundary/nitrogen6x/nitrogen6x.c      |  69 +-------
>  board/embest/mx6boards/Makefile             |   9 ++
>  board/embest/mx6boards/mx6boards.c          | 601
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  board/freescale/mx6sabresd/mx6sabresd.c     |  67 +-------
>  board/freescale/mx6slevk/mx6slevk.c         |  20 +++
>  board/gateworks/gw_ventana/gw_ventana.c     | 215 ++++++++++++++++++++++---
>  board/gateworks/gw_ventana/ventana_eeprom.h |  14 +-
>  board/wandboard/wandboard.c                 | 146 ++++++++++++++---
>  boards.cfg                                  |   2 +
>  common/spl/spl_nand.c                       |   2 +-
>  drivers/power/pmic/Makefile                 |   1 +
>  drivers/power/pmic/pmic_ltc3676.c           |  32 ++++
>  drivers/power/pmic/pmic_pfuze100.c          |   2 +-
>  drivers/video/Makefile                      |   1 +
>  drivers/video/imx25lcdc.c                   | 121 ++++++++++++++
>  include/configs/embestmx6boards.h           | 336
> +++++++++++++++++++++++++++++++++++++++
>  include/configs/gw_ventana.h                |  20 +++
>  include/configs/hummingboard.h              |   2 +
>  include/configs/m28evk.h                    |   1 -
>  include/configs/mx53ard.h                   |   2 +
>  include/configs/mx53evk.h                   |   2 +
>  include/configs/mx53loco.h                  |   2 +
>  include/configs/mx53smd.h                   |   2 +
>  include/configs/mx6sabre_common.h           |   2 +
>  include/configs/mx6sabresd.h                |   1 +
>  include/configs/mx6slevk.h                  |  12 ++
>  include/configs/mxs.h                       |   1 +
>  include/configs/nitrogen6x.h                |   2 +
>  include/configs/udoo.h                      |   2 +
>  include/configs/wandboard.h                 |  38 ++++-
>  include/power/ltc3676_pmic.h                |  51 ++++++
>  include/power/pfuze100_pmic.h               |   1 +
>  40 files changed, 1876 insertions(+), 195 deletions(-)
>  create mode 100644 arch/arm/imx-common/video.c
>  create mode 100644 arch/arm/include/asm/imx-common/video.h
>  create mode 100644 board/embest/mx6boards/Makefile
>  create mode 100644 board/embest/mx6boards/mx6boards.c
>  create mode 100644 drivers/power/pmic/pmic_ltc3676.c
>  create mode 100644 drivers/video/imx25lcdc.c
>  create mode 100644 include/configs/embestmx6boards.h
>  create mode 100644 include/power/ltc3676_pmic.h
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2014-05-15  9:02 Stefano Babic
  2014-05-16 17:35 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-05-15  9:02 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !

The following changes since commit d2a3e911390f9fc4d8c0ee4b3c7fc75f4fd3fd19:

  Merge branch 'u-boot/master' (2014-05-09 11:50:14 +0200)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to e7f9350525d73233d4eaf1793f8fe618e9fd4910:

  Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-05-15
10:27:32 +0200)

----------------------------------------------------------------

Eric Benard (8):
      imx-common: add board_video_skip
      nitrogen6x: use common board_video_skip
      mx6sabresd: use common board_video_skip
      RiOTboard and MarSBoard: add new boards support
      imx-common/video: add detect_hdmi
      nitrogen6x: use common detect_hdmi
      mx6sabresd: use common detect_hdmi
      embest/mx6boards: use common detect_hdmi

Eric Nelson (1):
      ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD

Fabio Estevam (11):
      wandboard: Convert to generic board
      mx53loco: Convert to generic board
      mx6sabre_common: Convert to generic board
      mx53ard: Convert to generic board
      mx53smd: Convert to generic board
      mx53evk: Convert to generic board
      udoo: Convert to generic board
      hummingboard: Convert to generic board
      mx6slevk: Add SPI NOR flash support
      nitrogen6x: Fix the PAD settings for the ECSPI chipselect
      iomux-v3: Add support for mx6sl LVE bit

Marek Vasut (1):
      arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD

Otavio Salvador (2):
      wandboard: add Future Eletronics 7" WVGA LCD extension board
      wandboard: Pass video kernel arguments for HDMI and LCD

Stefano Babic (3):
      mx6: fix weird formatting in imx6q-sabreauto.dts
      Merge branch 'master' of git://git.denx.de/u-boot-arm
      Merge branch 'master' of git://git.denx.de/u-boot-arm

Thomas Diener (2):
      imx25: Add new hardware registers
      video: Add support for imx25 lcd controller

Tim Harvey (10):
      ventana: fixed comments in eeprom header
      ventana: remove redundant include
      power: make pfuze100 be able to coexist with other pmics
      ventana: use non-generic pfuze100 init
      power: Add support for LTC3676 PMIC
      ventana: Add support for the LTC3676 PMIC
      imx6: ventana: fix system-serial dt property
      imx: ventana: Convert to generic board
      imx: ventana: add HDMI and LVDS display capability
      nand: remove CONFIG_SYS_NAND_PAGE_SIZE

 arch/arm/dts/imx6q-sabreauto.dts            |  10 +-
 arch/arm/imx-common/Makefile                |   1 +
 arch/arm/imx-common/iomux-v3.c              |   8 +
 arch/arm/imx-common/video.c                 |  65 ++++++++
 arch/arm/include/asm/arch-mx25/imx-regs.h   | 175 ++++++++++++++++++++
 arch/arm/include/asm/arch-mx6/mx6sl_pins.h  |   4 +
 arch/arm/include/asm/imx-common/iomux-v3.h  |   5 +
 arch/arm/include/asm/imx-common/video.h     |  24 +++
 board/boundary/nitrogen6x/nitrogen6x.c      |  69 +-------
 board/embest/mx6boards/Makefile             |   9 ++
 board/embest/mx6boards/mx6boards.c          | 601
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/freescale/mx6sabresd/mx6sabresd.c     |  67 +-------
 board/freescale/mx6slevk/mx6slevk.c         |  20 +++
 board/gateworks/gw_ventana/gw_ventana.c     | 215 ++++++++++++++++++++++---
 board/gateworks/gw_ventana/ventana_eeprom.h |  14 +-
 board/wandboard/wandboard.c                 | 146 ++++++++++++++---
 boards.cfg                                  |   2 +
 common/spl/spl_nand.c                       |   2 +-
 drivers/power/pmic/Makefile                 |   1 +
 drivers/power/pmic/pmic_ltc3676.c           |  32 ++++
 drivers/power/pmic/pmic_pfuze100.c          |   2 +-
 drivers/video/Makefile                      |   1 +
 drivers/video/imx25lcdc.c                   | 121 ++++++++++++++
 include/configs/embestmx6boards.h           | 336
+++++++++++++++++++++++++++++++++++++++
 include/configs/gw_ventana.h                |  20 +++
 include/configs/hummingboard.h              |   2 +
 include/configs/m28evk.h                    |   1 -
 include/configs/mx53ard.h                   |   2 +
 include/configs/mx53evk.h                   |   2 +
 include/configs/mx53loco.h                  |   2 +
 include/configs/mx53smd.h                   |   2 +
 include/configs/mx6sabre_common.h           |   2 +
 include/configs/mx6sabresd.h                |   1 +
 include/configs/mx6slevk.h                  |  12 ++
 include/configs/mxs.h                       |   1 +
 include/configs/nitrogen6x.h                |   2 +
 include/configs/udoo.h                      |   2 +
 include/configs/wandboard.h                 |  38 ++++-
 include/power/ltc3676_pmic.h                |  51 ++++++
 include/power/pfuze100_pmic.h               |   1 +
 40 files changed, 1876 insertions(+), 195 deletions(-)
 create mode 100644 arch/arm/imx-common/video.c
 create mode 100644 arch/arm/include/asm/imx-common/video.h
 create mode 100644 board/embest/mx6boards/Makefile
 create mode 100644 board/embest/mx6boards/mx6boards.c
 create mode 100644 drivers/power/pmic/pmic_ltc3676.c
 create mode 100644 drivers/video/imx25lcdc.c
 create mode 100644 include/configs/embestmx6boards.h
 create mode 100644 include/power/ltc3676_pmic.h


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-04-07 16:20 Stefano Babic
@ 2014-04-07 17:51 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-04-07 17:51 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Mon, 07 Apr 2014 18:20:36 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> this contains the fix for the i.MX6 errata. I do not foresee now to send
> another PR before release, maybe this is the last one for 2014.04.
> 
> The following changes since commit 1a9df13d5bc0b68c9dcae88d244c995c9351db67:
> 
>   arm: mxs: Add support for generating signed BootStream (2014-04-04
> 11:44:59 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 68659d649debc9fb3d8ce21ce4dcfe3a66b63e3a:
> 
>   MX6: Enable ARM errata workaround 794072 and 761320 (2014-04-07
> 18:11:01 +0200)
> 
> ----------------------------------------------------------------
> Nitin Garg (3):
>       ARM: Add workaround for Cortex-A9 errata 794072
>       ARM: Add workaround for Cortex-A9 errata 761320
>       MX6: Enable ARM errata workaround 794072 and 761320
> 
>  README                       |    2 ++
>  arch/arm/cpu/armv7/start.S   |    7 ++++++-
>  include/configs/mx6_common.h |    2 ++
>  3 files changed, 10 insertions(+), 1 deletion(-)
> 
> Best regards,
> Stefano
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2014-04-07 16:20 Stefano Babic
  2014-04-07 17:51 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-04-07 16:20 UTC (permalink / raw)
  To: u-boot

Hi Albert,

this contains the fix for the i.MX6 errata. I do not foresee now to send
another PR before release, maybe this is the last one for 2014.04.

The following changes since commit 1a9df13d5bc0b68c9dcae88d244c995c9351db67:

  arm: mxs: Add support for generating signed BootStream (2014-04-04
11:44:59 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 68659d649debc9fb3d8ce21ce4dcfe3a66b63e3a:

  MX6: Enable ARM errata workaround 794072 and 761320 (2014-04-07
18:11:01 +0200)

----------------------------------------------------------------
Nitin Garg (3):
      ARM: Add workaround for Cortex-A9 errata 794072
      ARM: Add workaround for Cortex-A9 errata 761320
      MX6: Enable ARM errata workaround 794072 and 761320

 README                       |    2 ++
 arch/arm/cpu/armv7/start.S   |    7 ++++++-
 include/configs/mx6_common.h |    2 ++
 3 files changed, 10 insertions(+), 1 deletion(-)

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-04-05 12:08 Stefano Babic
@ 2014-04-05 14:46 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-04-05 14:46 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Sat, 05 Apr 2014 14:08:47 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 00b132bf34c5be86a108ac7fe8231ad9e97f6de4:
> 
>   config:trats2: Change u-boot's TEXT_BASE from 0x78100000 to 0x43e00000
> (2014-04-02 21:00:04 +0900)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 1a9df13d5bc0b68c9dcae88d244c995c9351db67:
> 
>   arm: mxs: Add support for generating signed BootStream (2014-04-04
> 11:44:59 +0200)
> 
> ----------------------------------------------------------------
> Eric Nelson (1):
>       ARM: mx6: Disable PCIe on SABRE Lite/Nitrogen6x
> 
> Fabio Estevam (1):
>       woodburn_sd: Remove CONFIG_BOOT_INTERNAL
> 
> Marek Vasut (12):
>       arm: mxs: Adjust the load address of U-Boot and SPL for HAB
>       arm: mxs: Add support for generating signed BootStream
>       ARM: mxs: Add OCOTP driver
>       pci: mx6: Implement power callback
>       ARM: mx6: Add PCIe on SabreSDP
>       arm: mx5: Fix memory slowness on MX53QSB
>       arm: mx5: Avoid hardcoding memory sizes on MX53QSB
>       arm: mx5: Fix memory slowness on M53EVK
>       arm: mx5: Avoid hardcoding memory sizes on M53EVK
>       arm: mxs: Properly set GD pointer in SPL
>       arm: mxs: Add serial console support into SPL
>       arm: mxs: Add support for generating signed BootStream
> 
> Stefano Babic (5):
>       mxs: fix warning in SPL with console support
>       imx: add rules for U-Boot DTB support
>       mx6: add example DTB for mx6qsabreauto
>       Revert "arm: mxs: Add support for generating signed BootStream"
>       Merge branch 'master' of git://git.denx.de/u-boot-arm into master
> 
>  Makefile                                       |    8 +-
>  arch/arm/config.mk                             |    4 +
>  arch/arm/cpu/arm926ejs/mxs/Makefile            |   60 +++++
>  arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg |   10 +
>  arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg   |    8 +-
>  arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg   |    8 +-
>  arch/arm/cpu/arm926ejs/mxs/spl_boot.c          |   35 +++
>  arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds      |    2 +-
>  arch/arm/dts/Makefile                          |    1 +
>  arch/arm/dts/imx6q-sabreauto.dts               |   13 +
>  arch/arm/imx-common/Makefile                   |    8 +
>  board/denx/m53evk/m53evk.c                     |   31 ++-
>  board/freescale/mx53loco/mx53loco.c            |   31 ++-
>  board/freescale/mx6sabresd/mx6sabresd.c        |   11 +
>  drivers/misc/Makefile                          |    1 +
>  drivers/misc/mxs_ocotp.c                       |  311
> ++++++++++++++++++++++++
>  drivers/pci/pcie_imx.c                         |   13 +-
>  include/configs/m53evk.h                       |    8 +-
>  include/configs/mx53loco.h                     |   10 +-
>  include/configs/mx6qsabreauto.h                |    3 +
>  include/configs/mx6sabresd.h                   |   10 +
>  include/configs/mxs.h                          |   15 +-
>  include/configs/nitrogen6x.h                   |    1 -
>  include/configs/woodburn_sd.h                  |    2 -
>  24 files changed, 564 insertions(+), 40 deletions(-)
>  create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg
>  create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
>  create mode 100644 drivers/misc/mxs_ocotp.c
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-04-05 11:03           ` Albert ARIBAUD
@ 2014-04-05 12:09             ` Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2014-04-05 12:09 UTC (permalink / raw)
  To: u-boot

On 05/04/2014 13:03, Albert ARIBAUD wrote:
> On Sat, 5 Apr 2014 10:22:03 +0200, Albert ARIBAUD
> <albert.u.boot@aribaud.net> wrote:
> 
>> Hi Stefano,
>>
>> On Fri, 04 Apr 2014 15:52:32 +0200, Stefano Babic <sbabic@denx.de>
>> wrote:
>>
>>> Hi Albert,
>>>
>>> On 03/04/2014 09:32, Stefano Babic wrote:
>>>
>>>>>> This fails to merge with current u-boot-arm/master. Can you have a look?
>>>>>> Or I have a closer look (much) later tonight.
>>>>>
>>>>> Stefano, I had a look, and I'd rather you solved the merge conflict.
>>>
>>> Conflicts are solved - I have already pull u-boot-arm/master. I hope you
>>> have no problem to pull u-boot-imx now.
>>
>> Thanks. Can you just send out a new PR?
> 

Done !

Thanks,
Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot]  [PULL] : Please pull u-boot-imx
@ 2014-04-05 12:08 Stefano Babic
  2014-04-05 14:46 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-04-05 12:08 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !

The following changes since commit 00b132bf34c5be86a108ac7fe8231ad9e97f6de4:

  config:trats2: Change u-boot's TEXT_BASE from 0x78100000 to 0x43e00000
(2014-04-02 21:00:04 +0900)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 1a9df13d5bc0b68c9dcae88d244c995c9351db67:

  arm: mxs: Add support for generating signed BootStream (2014-04-04
11:44:59 +0200)

----------------------------------------------------------------
Eric Nelson (1):
      ARM: mx6: Disable PCIe on SABRE Lite/Nitrogen6x

Fabio Estevam (1):
      woodburn_sd: Remove CONFIG_BOOT_INTERNAL

Marek Vasut (12):
      arm: mxs: Adjust the load address of U-Boot and SPL for HAB
      arm: mxs: Add support for generating signed BootStream
      ARM: mxs: Add OCOTP driver
      pci: mx6: Implement power callback
      ARM: mx6: Add PCIe on SabreSDP
      arm: mx5: Fix memory slowness on MX53QSB
      arm: mx5: Avoid hardcoding memory sizes on MX53QSB
      arm: mx5: Fix memory slowness on M53EVK
      arm: mx5: Avoid hardcoding memory sizes on M53EVK
      arm: mxs: Properly set GD pointer in SPL
      arm: mxs: Add serial console support into SPL
      arm: mxs: Add support for generating signed BootStream

Stefano Babic (5):
      mxs: fix warning in SPL with console support
      imx: add rules for U-Boot DTB support
      mx6: add example DTB for mx6qsabreauto
      Revert "arm: mxs: Add support for generating signed BootStream"
      Merge branch 'master' of git://git.denx.de/u-boot-arm into master

 Makefile                                       |    8 +-
 arch/arm/config.mk                             |    4 +
 arch/arm/cpu/arm926ejs/mxs/Makefile            |   60 +++++
 arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg |   10 +
 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg   |    8 +-
 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg   |    8 +-
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c          |   35 +++
 arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds      |    2 +-
 arch/arm/dts/Makefile                          |    1 +
 arch/arm/dts/imx6q-sabreauto.dts               |   13 +
 arch/arm/imx-common/Makefile                   |    8 +
 board/denx/m53evk/m53evk.c                     |   31 ++-
 board/freescale/mx53loco/mx53loco.c            |   31 ++-
 board/freescale/mx6sabresd/mx6sabresd.c        |   11 +
 drivers/misc/Makefile                          |    1 +
 drivers/misc/mxs_ocotp.c                       |  311
++++++++++++++++++++++++
 drivers/pci/pcie_imx.c                         |   13 +-
 include/configs/m53evk.h                       |    8 +-
 include/configs/mx53loco.h                     |   10 +-
 include/configs/mx6qsabreauto.h                |    3 +
 include/configs/mx6sabresd.h                   |   10 +
 include/configs/mxs.h                          |   15 +-
 include/configs/nitrogen6x.h                   |    1 -
 include/configs/woodburn_sd.h                  |    2 -
 24 files changed, 564 insertions(+), 40 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg
 create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
 create mode 100644 drivers/misc/mxs_ocotp.c


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-04-05  8:22         ` Albert ARIBAUD
@ 2014-04-05 11:03           ` Albert ARIBAUD
  2014-04-05 12:09             ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Albert ARIBAUD @ 2014-04-05 11:03 UTC (permalink / raw)
  To: u-boot

On Sat, 5 Apr 2014 10:22:03 +0200, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:

> Hi Stefano,
> 
> On Fri, 04 Apr 2014 15:52:32 +0200, Stefano Babic <sbabic@denx.de>
> wrote:
> 
> > Hi Albert,
> > 
> > On 03/04/2014 09:32, Stefano Babic wrote:
> > 
> > >>> This fails to merge with current u-boot-arm/master. Can you have a look?
> > >>> Or I have a closer look (much) later tonight.
> > >>
> > >> Stefano, I had a look, and I'd rather you solved the merge conflict.
> > 
> > Conflicts are solved - I have already pull u-boot-arm/master. I hope you
> > have no problem to pull u-boot-imx now.
> 
> Thanks. Can you just send out a new PR?

(meanwhile, I'm preparing the tests and ARM PR)

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-04-04 13:52       ` Stefano Babic
@ 2014-04-05  8:22         ` Albert ARIBAUD
  2014-04-05 11:03           ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Albert ARIBAUD @ 2014-04-05  8:22 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Fri, 04 Apr 2014 15:52:32 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> On 03/04/2014 09:32, Stefano Babic wrote:
> 
> >>> This fails to merge with current u-boot-arm/master. Can you have a look?
> >>> Or I have a closer look (much) later tonight.
> >>
> >> Stefano, I had a look, and I'd rather you solved the merge conflict.
> 
> Conflicts are solved - I have already pull u-boot-arm/master. I hope you
> have no problem to pull u-boot-imx now.

Thanks. Can you just send out a new PR?

> Thanks,
> Stefano

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-04-03  7:32     ` Stefano Babic
@ 2014-04-04 13:52       ` Stefano Babic
  2014-04-05  8:22         ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-04-04 13:52 UTC (permalink / raw)
  To: u-boot

Hi Albert,

On 03/04/2014 09:32, Stefano Babic wrote:

>>> This fails to merge with current u-boot-arm/master. Can you have a look?
>>> Or I have a closer look (much) later tonight.
>>
>> Stefano, I had a look, and I'd rather you solved the merge conflict.

Conflicts are solved - I have already pull u-boot-arm/master. I hope you
have no problem to pull u-boot-imx now.

Thanks,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-04-03  6:31   ` Albert ARIBAUD
@ 2014-04-03  7:32     ` Stefano Babic
  2014-04-04 13:52       ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-04-03  7:32 UTC (permalink / raw)
  To: u-boot

Hi Albert,

On 03/04/2014 08:31, Albert ARIBAUD wrote:
> On Wed, 2 Apr 2014 20:00:07 +0200, Albert ARIBAUD
> <albert.u.boot@aribaud.net> wrote:
> 
>> Hi Stefano,
>>
>> On Wed, 02 Apr 2014 18:54:14 +0200, Stefano Babic <sbabic@denx.de>
>> wrote:
>>
>>> Hi Albert,
>>>
>>> please pull from u-boot-imx, thanks !
>>>
>>>
>>> The following changes since commit 81a1d6173cd255c5c04c332ed69498c6e173515f:
>>>
>>>   mx25pdk: Align the environment with other FSL boards (2014-03-12
>>> 11:19:23 +0100)
>>>
>>> are available in the git repository at:
>>>
>>>   git://www.denx.de/git/u-boot-imx.git master
>>>
>>> for you to fetch changes up to fa9c02163247369aeb7c5dd02927547c8a5be8ef:
>>>
>>>   mx6: add example DTB for mx6qsabreauto (2014-04-02 10:46:21 +0200)
>>>
>>> ----------------------------------------------------------------
>>> Eric Nelson (1):
>>>       ARM: mx6: Disable PCIe on SABRE Lite/Nitrogen6x
>>>
>>> Fabio Estevam (1):
>>>       woodburn_sd: Remove CONFIG_BOOT_INTERNAL
>>>
>>> Marek Vasut (11):
>>>       arm: mxs: Adjust the load address of U-Boot and SPL for HAB
>>>       arm: mxs: Add support for generating signed BootStream
>>>       ARM: mxs: Add OCOTP driver
>>>       pci: mx6: Implement power callback
>>>       ARM: mx6: Add PCIe on SabreSDP
>>>       arm: mx5: Fix memory slowness on MX53QSB
>>>       arm: mx5: Avoid hardcoding memory sizes on MX53QSB
>>>       arm: mx5: Fix memory slowness on M53EVK
>>>       arm: mx5: Avoid hardcoding memory sizes on M53EVK
>>>       arm: mxs: Properly set GD pointer in SPL
>>>       arm: mxs: Add serial console support into SPL
>>>
>>> Stefano Babic (3):
>>>       mxs: fix warning in SPL with console support
>>>       imx: add rules for U-Boot DTB support
>>>       mx6: add example DTB for mx6qsabreauto
>>>
>>>  Makefile                                       |    8 +-
>>>  arch/arm/config.mk                             |    4 +
>>>  arch/arm/cpu/arm926ejs/mxs/Makefile            |   77 ++++++
>>>  arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg |   10 +
>>>  arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg   |    8 +-
>>>  arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg   |    8 +-
>>>  arch/arm/cpu/arm926ejs/mxs/spl_boot.c          |   35 +++
>>>  arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds      |    2 +-
>>>  arch/arm/dts/Makefile                          |    1 +
>>>  arch/arm/dts/imx6q-sabreauto.dts               |   13 +
>>>  arch/arm/imx-common/Makefile                   |    8 +
>>>  board/denx/m53evk/m53evk.c                     |   31 ++-
>>>  board/freescale/mx53loco/mx53loco.c            |   31 ++-
>>>  board/freescale/mx6sabresd/mx6sabresd.c        |   11 +
>>>  drivers/misc/Makefile                          |    1 +
>>>  drivers/misc/mxs_ocotp.c                       |  311
>>> ++++++++++++++++++++++++
>>>  drivers/pci/pcie_imx.c                         |   13 +-
>>>  include/configs/m53evk.h                       |    8 +-
>>>  include/configs/mx53loco.h                     |   10 +-
>>>  include/configs/mx6qsabreauto.h                |    3 +
>>>  include/configs/mx6sabresd.h                   |   10 +
>>>  include/configs/mxs.h                          |   15 +-
>>>  include/configs/nitrogen6x.h                   |    1 -
>>>  include/configs/woodburn_sd.h                  |    2 -
>>>  24 files changed, 581 insertions(+), 40 deletions(-)
>>>  create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg
>>>  create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
>>>  create mode 100644 drivers/misc/mxs_ocotp.c
>>>
>>
>> This fails to merge with current u-boot-arm/master. Can you have a look?
>> Or I have a closer look (much) later tonight.
> 
> Stefano, I had a look, and I'd rather you solved the merge conflict.
> 

Of course, I check this issue !

Regards,
Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-04-02 18:00 ` Albert ARIBAUD
@ 2014-04-03  6:31   ` Albert ARIBAUD
  2014-04-03  7:32     ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Albert ARIBAUD @ 2014-04-03  6:31 UTC (permalink / raw)
  To: u-boot

On Wed, 2 Apr 2014 20:00:07 +0200, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:

> Hi Stefano,
> 
> On Wed, 02 Apr 2014 18:54:14 +0200, Stefano Babic <sbabic@denx.de>
> wrote:
> 
> > Hi Albert,
> > 
> > please pull from u-boot-imx, thanks !
> > 
> > 
> > The following changes since commit 81a1d6173cd255c5c04c332ed69498c6e173515f:
> > 
> >   mx25pdk: Align the environment with other FSL boards (2014-03-12
> > 11:19:23 +0100)
> > 
> > are available in the git repository at:
> > 
> >   git://www.denx.de/git/u-boot-imx.git master
> > 
> > for you to fetch changes up to fa9c02163247369aeb7c5dd02927547c8a5be8ef:
> > 
> >   mx6: add example DTB for mx6qsabreauto (2014-04-02 10:46:21 +0200)
> > 
> > ----------------------------------------------------------------
> > Eric Nelson (1):
> >       ARM: mx6: Disable PCIe on SABRE Lite/Nitrogen6x
> > 
> > Fabio Estevam (1):
> >       woodburn_sd: Remove CONFIG_BOOT_INTERNAL
> > 
> > Marek Vasut (11):
> >       arm: mxs: Adjust the load address of U-Boot and SPL for HAB
> >       arm: mxs: Add support for generating signed BootStream
> >       ARM: mxs: Add OCOTP driver
> >       pci: mx6: Implement power callback
> >       ARM: mx6: Add PCIe on SabreSDP
> >       arm: mx5: Fix memory slowness on MX53QSB
> >       arm: mx5: Avoid hardcoding memory sizes on MX53QSB
> >       arm: mx5: Fix memory slowness on M53EVK
> >       arm: mx5: Avoid hardcoding memory sizes on M53EVK
> >       arm: mxs: Properly set GD pointer in SPL
> >       arm: mxs: Add serial console support into SPL
> > 
> > Stefano Babic (3):
> >       mxs: fix warning in SPL with console support
> >       imx: add rules for U-Boot DTB support
> >       mx6: add example DTB for mx6qsabreauto
> > 
> >  Makefile                                       |    8 +-
> >  arch/arm/config.mk                             |    4 +
> >  arch/arm/cpu/arm926ejs/mxs/Makefile            |   77 ++++++
> >  arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg |   10 +
> >  arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg   |    8 +-
> >  arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg   |    8 +-
> >  arch/arm/cpu/arm926ejs/mxs/spl_boot.c          |   35 +++
> >  arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds      |    2 +-
> >  arch/arm/dts/Makefile                          |    1 +
> >  arch/arm/dts/imx6q-sabreauto.dts               |   13 +
> >  arch/arm/imx-common/Makefile                   |    8 +
> >  board/denx/m53evk/m53evk.c                     |   31 ++-
> >  board/freescale/mx53loco/mx53loco.c            |   31 ++-
> >  board/freescale/mx6sabresd/mx6sabresd.c        |   11 +
> >  drivers/misc/Makefile                          |    1 +
> >  drivers/misc/mxs_ocotp.c                       |  311
> > ++++++++++++++++++++++++
> >  drivers/pci/pcie_imx.c                         |   13 +-
> >  include/configs/m53evk.h                       |    8 +-
> >  include/configs/mx53loco.h                     |   10 +-
> >  include/configs/mx6qsabreauto.h                |    3 +
> >  include/configs/mx6sabresd.h                   |   10 +
> >  include/configs/mxs.h                          |   15 +-
> >  include/configs/nitrogen6x.h                   |    1 -
> >  include/configs/woodburn_sd.h                  |    2 -
> >  24 files changed, 581 insertions(+), 40 deletions(-)
> >  create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg
> >  create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
> >  create mode 100644 drivers/misc/mxs_ocotp.c
> > 
> 
> This fails to merge with current u-boot-arm/master. Can you have a look?
> Or I have a closer look (much) later tonight.

Stefano, I had a look, and I'd rather you solved the merge conflict.

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-04-02 16:54 Stefano Babic
@ 2014-04-02 18:00 ` Albert ARIBAUD
  2014-04-03  6:31   ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Albert ARIBAUD @ 2014-04-02 18:00 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Wed, 02 Apr 2014 18:54:14 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> 
> The following changes since commit 81a1d6173cd255c5c04c332ed69498c6e173515f:
> 
>   mx25pdk: Align the environment with other FSL boards (2014-03-12
> 11:19:23 +0100)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to fa9c02163247369aeb7c5dd02927547c8a5be8ef:
> 
>   mx6: add example DTB for mx6qsabreauto (2014-04-02 10:46:21 +0200)
> 
> ----------------------------------------------------------------
> Eric Nelson (1):
>       ARM: mx6: Disable PCIe on SABRE Lite/Nitrogen6x
> 
> Fabio Estevam (1):
>       woodburn_sd: Remove CONFIG_BOOT_INTERNAL
> 
> Marek Vasut (11):
>       arm: mxs: Adjust the load address of U-Boot and SPL for HAB
>       arm: mxs: Add support for generating signed BootStream
>       ARM: mxs: Add OCOTP driver
>       pci: mx6: Implement power callback
>       ARM: mx6: Add PCIe on SabreSDP
>       arm: mx5: Fix memory slowness on MX53QSB
>       arm: mx5: Avoid hardcoding memory sizes on MX53QSB
>       arm: mx5: Fix memory slowness on M53EVK
>       arm: mx5: Avoid hardcoding memory sizes on M53EVK
>       arm: mxs: Properly set GD pointer in SPL
>       arm: mxs: Add serial console support into SPL
> 
> Stefano Babic (3):
>       mxs: fix warning in SPL with console support
>       imx: add rules for U-Boot DTB support
>       mx6: add example DTB for mx6qsabreauto
> 
>  Makefile                                       |    8 +-
>  arch/arm/config.mk                             |    4 +
>  arch/arm/cpu/arm926ejs/mxs/Makefile            |   77 ++++++
>  arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg |   10 +
>  arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg   |    8 +-
>  arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg   |    8 +-
>  arch/arm/cpu/arm926ejs/mxs/spl_boot.c          |   35 +++
>  arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds      |    2 +-
>  arch/arm/dts/Makefile                          |    1 +
>  arch/arm/dts/imx6q-sabreauto.dts               |   13 +
>  arch/arm/imx-common/Makefile                   |    8 +
>  board/denx/m53evk/m53evk.c                     |   31 ++-
>  board/freescale/mx53loco/mx53loco.c            |   31 ++-
>  board/freescale/mx6sabresd/mx6sabresd.c        |   11 +
>  drivers/misc/Makefile                          |    1 +
>  drivers/misc/mxs_ocotp.c                       |  311
> ++++++++++++++++++++++++
>  drivers/pci/pcie_imx.c                         |   13 +-
>  include/configs/m53evk.h                       |    8 +-
>  include/configs/mx53loco.h                     |   10 +-
>  include/configs/mx6qsabreauto.h                |    3 +
>  include/configs/mx6sabresd.h                   |   10 +
>  include/configs/mxs.h                          |   15 +-
>  include/configs/nitrogen6x.h                   |    1 -
>  include/configs/woodburn_sd.h                  |    2 -
>  24 files changed, 581 insertions(+), 40 deletions(-)
>  create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg
>  create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
>  create mode 100644 drivers/misc/mxs_ocotp.c
> 

This fails to merge with current u-boot-arm/master. Can you have a look?
Or I have a closer look (much) later tonight.

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2014-04-02 16:54 Stefano Babic
  2014-04-02 18:00 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-04-02 16:54 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !


The following changes since commit 81a1d6173cd255c5c04c332ed69498c6e173515f:

  mx25pdk: Align the environment with other FSL boards (2014-03-12
11:19:23 +0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to fa9c02163247369aeb7c5dd02927547c8a5be8ef:

  mx6: add example DTB for mx6qsabreauto (2014-04-02 10:46:21 +0200)

----------------------------------------------------------------
Eric Nelson (1):
      ARM: mx6: Disable PCIe on SABRE Lite/Nitrogen6x

Fabio Estevam (1):
      woodburn_sd: Remove CONFIG_BOOT_INTERNAL

Marek Vasut (11):
      arm: mxs: Adjust the load address of U-Boot and SPL for HAB
      arm: mxs: Add support for generating signed BootStream
      ARM: mxs: Add OCOTP driver
      pci: mx6: Implement power callback
      ARM: mx6: Add PCIe on SabreSDP
      arm: mx5: Fix memory slowness on MX53QSB
      arm: mx5: Avoid hardcoding memory sizes on MX53QSB
      arm: mx5: Fix memory slowness on M53EVK
      arm: mx5: Avoid hardcoding memory sizes on M53EVK
      arm: mxs: Properly set GD pointer in SPL
      arm: mxs: Add serial console support into SPL

Stefano Babic (3):
      mxs: fix warning in SPL with console support
      imx: add rules for U-Boot DTB support
      mx6: add example DTB for mx6qsabreauto

 Makefile                                       |    8 +-
 arch/arm/config.mk                             |    4 +
 arch/arm/cpu/arm926ejs/mxs/Makefile            |   77 ++++++
 arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg |   10 +
 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg   |    8 +-
 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg   |    8 +-
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c          |   35 +++
 arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds      |    2 +-
 arch/arm/dts/Makefile                          |    1 +
 arch/arm/dts/imx6q-sabreauto.dts               |   13 +
 arch/arm/imx-common/Makefile                   |    8 +
 board/denx/m53evk/m53evk.c                     |   31 ++-
 board/freescale/mx53loco/mx53loco.c            |   31 ++-
 board/freescale/mx6sabresd/mx6sabresd.c        |   11 +
 drivers/misc/Makefile                          |    1 +
 drivers/misc/mxs_ocotp.c                       |  311
++++++++++++++++++++++++
 drivers/pci/pcie_imx.c                         |   13 +-
 include/configs/m53evk.h                       |    8 +-
 include/configs/mx53loco.h                     |   10 +-
 include/configs/mx6qsabreauto.h                |    3 +
 include/configs/mx6sabresd.h                   |   10 +
 include/configs/mxs.h                          |   15 +-
 include/configs/nitrogen6x.h                   |    1 -
 include/configs/woodburn_sd.h                  |    2 -
 24 files changed, 581 insertions(+), 40 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg
 create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
 create mode 100644 drivers/misc/mxs_ocotp.c

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-03-12 10:44 Stefano Babic
@ 2014-03-13 17:27 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-03-13 17:27 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Wed, 12 Mar 2014 11:44:25 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit cc07294bc704694ae33db75b25ac557e5917a83f:
> 
>   arm: am335x: DXR2: Reset SMSC LAN9303 switch via GPIO upon bootup
> (2014-03-04 09:42:07 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 81a1d6173cd255c5c04c332ed69498c6e173515f:
> 
>   mx25pdk: Align the environment with other FSL boards (2014-03-12
> 11:19:23 +0100)
> 
> ----------------------------------------------------------------
> Fabio Estevam (6):
>       wandboard: Staticize usdhc1_pads
>       mmc: Add a prototype for board_mmc_init()
>       wandboard: Fix sparse warning
>       wandboard: Include <input.h>
>       fb: Add a prototype for board_video_skip()
>       mx25pdk: Align the environment with other FSL boards
> 
> Stefano Babic (1):
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
> 
> Tim Harvey (2):
>       power: add PFUZE100 PMIC driver
>       ventana: Add Gateworks Ventana family support
> 
>  board/gateworks/gw_ventana/Makefile         |   10 +
>  board/gateworks/gw_ventana/README           |   55 ++
>  board/gateworks/gw_ventana/clocks.cfg       |   42 +
>  board/gateworks/gw_ventana/gsc.c            |  129 +++
>  board/gateworks/gw_ventana/gsc.h            |   64 ++
>  board/gateworks/gw_ventana/gw_ventana.c     | 1263
> +++++++++++++++++++++++++++
>  board/gateworks/gw_ventana/gw_ventana.cfg   |   44 +
>  board/gateworks/gw_ventana/ventana_eeprom.h |  106 +++
>  board/wandboard/wandboard.c                 |    4 +-
>  boards.cfg                                  |    5 +
>  drivers/power/pmic/Makefile                 |    1 +
>  drivers/power/pmic/pmic_pfuze100.c          |   32 +
>  include/configs/gw_ventana.h                |  425 +++++++++
>  include/configs/mx25pdk.h                   |  103 ++-
>  include/linux/fb.h                          |    2 +
>  include/mmc.h                               |    2 +
>  include/phy.h                               |    2 +
>  include/power/pfuze100_pmic.h               |   96 ++
>  18 files changed, 2379 insertions(+), 6 deletions(-)
>  create mode 100644 board/gateworks/gw_ventana/Makefile
>  create mode 100644 board/gateworks/gw_ventana/README
>  create mode 100644 board/gateworks/gw_ventana/clocks.cfg
>  create mode 100644 board/gateworks/gw_ventana/gsc.c
>  create mode 100644 board/gateworks/gw_ventana/gsc.h
>  create mode 100644 board/gateworks/gw_ventana/gw_ventana.c
>  create mode 100644 board/gateworks/gw_ventana/gw_ventana.cfg
>  create mode 100644 board/gateworks/gw_ventana/ventana_eeprom.h
>  create mode 100644 drivers/power/pmic/pmic_pfuze100.c
>  create mode 100644 include/configs/gw_ventana.h
>  create mode 100644 include/power/pfuze100_pmic.h
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2014-03-12 10:44 Stefano Babic
  2014-03-13 17:27 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-03-12 10:44 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !

The following changes since commit cc07294bc704694ae33db75b25ac557e5917a83f:

  arm: am335x: DXR2: Reset SMSC LAN9303 switch via GPIO upon bootup
(2014-03-04 09:42:07 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 81a1d6173cd255c5c04c332ed69498c6e173515f:

  mx25pdk: Align the environment with other FSL boards (2014-03-12
11:19:23 +0100)

----------------------------------------------------------------
Fabio Estevam (6):
      wandboard: Staticize usdhc1_pads
      mmc: Add a prototype for board_mmc_init()
      wandboard: Fix sparse warning
      wandboard: Include <input.h>
      fb: Add a prototype for board_video_skip()
      mx25pdk: Align the environment with other FSL boards

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot-arm

Tim Harvey (2):
      power: add PFUZE100 PMIC driver
      ventana: Add Gateworks Ventana family support

 board/gateworks/gw_ventana/Makefile         |   10 +
 board/gateworks/gw_ventana/README           |   55 ++
 board/gateworks/gw_ventana/clocks.cfg       |   42 +
 board/gateworks/gw_ventana/gsc.c            |  129 +++
 board/gateworks/gw_ventana/gsc.h            |   64 ++
 board/gateworks/gw_ventana/gw_ventana.c     | 1263
+++++++++++++++++++++++++++
 board/gateworks/gw_ventana/gw_ventana.cfg   |   44 +
 board/gateworks/gw_ventana/ventana_eeprom.h |  106 +++
 board/wandboard/wandboard.c                 |    4 +-
 boards.cfg                                  |    5 +
 drivers/power/pmic/Makefile                 |    1 +
 drivers/power/pmic/pmic_pfuze100.c          |   32 +
 include/configs/gw_ventana.h                |  425 +++++++++
 include/configs/mx25pdk.h                   |  103 ++-
 include/linux/fb.h                          |    2 +
 include/mmc.h                               |    2 +
 include/phy.h                               |    2 +
 include/power/pfuze100_pmic.h               |   96 ++
 18 files changed, 2379 insertions(+), 6 deletions(-)
 create mode 100644 board/gateworks/gw_ventana/Makefile
 create mode 100644 board/gateworks/gw_ventana/README
 create mode 100644 board/gateworks/gw_ventana/clocks.cfg
 create mode 100644 board/gateworks/gw_ventana/gsc.c
 create mode 100644 board/gateworks/gw_ventana/gsc.h
 create mode 100644 board/gateworks/gw_ventana/gw_ventana.c
 create mode 100644 board/gateworks/gw_ventana/gw_ventana.cfg
 create mode 100644 board/gateworks/gw_ventana/ventana_eeprom.h
 create mode 100644 drivers/power/pmic/pmic_pfuze100.c
 create mode 100644 include/configs/gw_ventana.h
 create mode 100644 include/power/pfuze100_pmic.h


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-02-19 10:04 Stefano Babic
@ 2014-02-19 15:05 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-02-19 15:05 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Wed, 19 Feb 2014 11:04:53 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> 
> The following changes since commit e97f9d817e600cd6f43d1d0da76f5787e33a5c56:
> 
>   Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2014-01-29
> 14:07:50 +0100)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to da781c60e5d55904d77931fcb63f25e65e2228be:
> 
>   imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK
> (2014-02-19 10:57:25 +0100)
> 
> ----------------------------------------------------------------
> Andy Ng (1):
>       imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK
> 
> Anson Huang (2):
>       imx6: ensure AHB clock is 132MHz in low freq boot mode
>       imx6: make sure MMDC_CHx_MASK is clear to avoid warm reset failure
> 
> Eric Nelson (1):
>       i.MX6: nitrogen6x: pedantic: BOOT_FROM==spi, not sd
> 
> Fabio Estevam (8):
>       nitrogen6x: README: Only calling 'make' is enough
>       nitrogen6x: README: Do not refer to MAINTAINERS file
>       mx6sl: Adjust fdt_addr to avoid address overlapping
>       hummingboard: Return from cpu_eth_init() directly
>       imx: Introduce a header for the imx cpu versions
>       mx6: Distinguish mx6dual from mx6quad
>       mx6qsabreauto: Update imximage.cfg
>       mx6: Enable L2 cache support
> 
> Marek Vasut (7):
>       ARM: armv7: Make indirect vector addresses globl
>       ARM: mx6: Add PCI express clock configuration
>       ARM: mx6: Add PCI express driver
>       ARM: mx6: Enable PCIe on Sabrelite
>       ARM: m53evk: Rename mxc-nand to mxc_nand
>       ARM: m53evk: Enable CONFIG_REGEX
>       pci: mx6: Implement reset callback
> 
> Markus Niebel (2):
>       ARM: imx6: fix wrong fec clk
>       NET: fec_mxc: fix MDIO clock prescaler calculation
> 
> Otavio Salvador (11):
>       cgtqmx6eval: Set default environment to use zImage
>       hummingboard: Set default environment to use zImage
>       mx23evk: Set default environment to use zImage
>       mx28evk: Set default environment to use zImage
>       mx51evk: Set default environment to use zImage
>       mx53loco: Set default environment to use zImage
>       mx6qarm2: Set default environment to use zImage
>       mx6sabre_common: Set default environment to use zImage
>       mx6slevk: Set default environment to use zImage
>       udoo: Set default environment to use zImage
>       vf610twr: Set default environment to use zImage
> 
> Stefano Babic (2):
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
> 
>  arch/arm/cpu/armv7/mx6/clock.c              |   77 +++-
>  arch/arm/cpu/armv7/mx6/soc.c                |  103 ++++-
>  arch/arm/cpu/armv7/start.S                  |    7 +
>  arch/arm/imx-common/cpu.c                   |    2 +
>  arch/arm/include/asm/arch-imx/cpu.h         |   13 +
>  arch/arm/include/asm/arch-mx5/sys_proto.h   |    7 +-
>  arch/arm/include/asm/arch-mx6/clock.h       |    1 +
>  arch/arm/include/asm/arch-mx6/imx-regs.h    |    1 +
>  arch/arm/include/asm/arch-mx6/iomux.h       |   27 ++
>  arch/arm/include/asm/arch-mx6/mx6dl_pins.h  |    6 +-
>  arch/arm/include/asm/arch-mx6/mx6q_pins.h   |    6 +-
>  arch/arm/include/asm/arch-mx6/sys_proto.h   |    8 +-
>  arch/arm/include/asm/pl310.h                |   21 +
>  board/boundary/nitrogen6x/README            |    4 +-
>  board/boundary/nitrogen6x/nitrogen6dl.cfg   |    2 +-
>  board/boundary/nitrogen6x/nitrogen6dl2g.cfg |    2 +-
>  board/boundary/nitrogen6x/nitrogen6q.cfg    |    2 +-
>  board/boundary/nitrogen6x/nitrogen6q2g.cfg  |    2 +-
>  board/boundary/nitrogen6x/nitrogen6s.cfg    |    2 +-
>  board/boundary/nitrogen6x/nitrogen6s1g.cfg  |    2 +-
>  board/freescale/mx6qsabreauto/imximage.cfg  |  136 +++---
>  board/solidrun/hummingboard/hummingboard.c  |    6 +-
>  drivers/net/fec_mxc.c                       |    8 +-
>  drivers/pci/Makefile                        |    1 +
>  drivers/pci/pcie_imx.c                      |  606
> +++++++++++++++++++++++++++
>  include/configs/cgtqmx6eval.h               |   14 +-
>  include/configs/hummingboard.h              |   20 +-
>  include/configs/m53evk.h                    |    6 +-
>  include/configs/mx23evk.h                   |   12 +-
>  include/configs/mx28evk.h                   |   26 +-
>  include/configs/mx51evk.h                   |   20 +-
>  include/configs/mx53loco.h                  |   20 +-
>  include/configs/mx6_common.h                |    5 +
>  include/configs/mx6qarm2.h                  |   10 +-
>  include/configs/mx6sabre_common.h           |   20 +-
>  include/configs/mx6slevk.h                  |   22 +-
>  include/configs/nitrogen6x.h                |   11 +
>  include/configs/udoo.h                      |   20 +-
>  include/configs/vf610twr.h                  |   20 +-
>  39 files changed, 1049 insertions(+), 229 deletions(-)
>  create mode 100644 arch/arm/include/asm/arch-imx/cpu.h
>  create mode 100644 drivers/pci/pcie_imx.c
> 
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2014-02-19 10:04 Stefano Babic
  2014-02-19 15:05 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-02-19 10:04 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !


The following changes since commit e97f9d817e600cd6f43d1d0da76f5787e33a5c56:

  Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2014-01-29
14:07:50 +0100)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to da781c60e5d55904d77931fcb63f25e65e2228be:

  imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK
(2014-02-19 10:57:25 +0100)

----------------------------------------------------------------
Andy Ng (1):
      imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK

Anson Huang (2):
      imx6: ensure AHB clock is 132MHz in low freq boot mode
      imx6: make sure MMDC_CHx_MASK is clear to avoid warm reset failure

Eric Nelson (1):
      i.MX6: nitrogen6x: pedantic: BOOT_FROM==spi, not sd

Fabio Estevam (8):
      nitrogen6x: README: Only calling 'make' is enough
      nitrogen6x: README: Do not refer to MAINTAINERS file
      mx6sl: Adjust fdt_addr to avoid address overlapping
      hummingboard: Return from cpu_eth_init() directly
      imx: Introduce a header for the imx cpu versions
      mx6: Distinguish mx6dual from mx6quad
      mx6qsabreauto: Update imximage.cfg
      mx6: Enable L2 cache support

Marek Vasut (7):
      ARM: armv7: Make indirect vector addresses globl
      ARM: mx6: Add PCI express clock configuration
      ARM: mx6: Add PCI express driver
      ARM: mx6: Enable PCIe on Sabrelite
      ARM: m53evk: Rename mxc-nand to mxc_nand
      ARM: m53evk: Enable CONFIG_REGEX
      pci: mx6: Implement reset callback

Markus Niebel (2):
      ARM: imx6: fix wrong fec clk
      NET: fec_mxc: fix MDIO clock prescaler calculation

Otavio Salvador (11):
      cgtqmx6eval: Set default environment to use zImage
      hummingboard: Set default environment to use zImage
      mx23evk: Set default environment to use zImage
      mx28evk: Set default environment to use zImage
      mx51evk: Set default environment to use zImage
      mx53loco: Set default environment to use zImage
      mx6qarm2: Set default environment to use zImage
      mx6sabre_common: Set default environment to use zImage
      mx6slevk: Set default environment to use zImage
      udoo: Set default environment to use zImage
      vf610twr: Set default environment to use zImage

Stefano Babic (2):
      Merge branch 'master' of git://git.denx.de/u-boot-arm
      Merge branch 'master' of git://git.denx.de/u-boot-arm

 arch/arm/cpu/armv7/mx6/clock.c              |   77 +++-
 arch/arm/cpu/armv7/mx6/soc.c                |  103 ++++-
 arch/arm/cpu/armv7/start.S                  |    7 +
 arch/arm/imx-common/cpu.c                   |    2 +
 arch/arm/include/asm/arch-imx/cpu.h         |   13 +
 arch/arm/include/asm/arch-mx5/sys_proto.h   |    7 +-
 arch/arm/include/asm/arch-mx6/clock.h       |    1 +
 arch/arm/include/asm/arch-mx6/imx-regs.h    |    1 +
 arch/arm/include/asm/arch-mx6/iomux.h       |   27 ++
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h  |    6 +-
 arch/arm/include/asm/arch-mx6/mx6q_pins.h   |    6 +-
 arch/arm/include/asm/arch-mx6/sys_proto.h   |    8 +-
 arch/arm/include/asm/pl310.h                |   21 +
 board/boundary/nitrogen6x/README            |    4 +-
 board/boundary/nitrogen6x/nitrogen6dl.cfg   |    2 +-
 board/boundary/nitrogen6x/nitrogen6dl2g.cfg |    2 +-
 board/boundary/nitrogen6x/nitrogen6q.cfg    |    2 +-
 board/boundary/nitrogen6x/nitrogen6q2g.cfg  |    2 +-
 board/boundary/nitrogen6x/nitrogen6s.cfg    |    2 +-
 board/boundary/nitrogen6x/nitrogen6s1g.cfg  |    2 +-
 board/freescale/mx6qsabreauto/imximage.cfg  |  136 +++---
 board/solidrun/hummingboard/hummingboard.c  |    6 +-
 drivers/net/fec_mxc.c                       |    8 +-
 drivers/pci/Makefile                        |    1 +
 drivers/pci/pcie_imx.c                      |  606
+++++++++++++++++++++++++++
 include/configs/cgtqmx6eval.h               |   14 +-
 include/configs/hummingboard.h              |   20 +-
 include/configs/m53evk.h                    |    6 +-
 include/configs/mx23evk.h                   |   12 +-
 include/configs/mx28evk.h                   |   26 +-
 include/configs/mx51evk.h                   |   20 +-
 include/configs/mx53loco.h                  |   20 +-
 include/configs/mx6_common.h                |    5 +
 include/configs/mx6qarm2.h                  |   10 +-
 include/configs/mx6sabre_common.h           |   20 +-
 include/configs/mx6slevk.h                  |   22 +-
 include/configs/nitrogen6x.h                |   11 +
 include/configs/udoo.h                      |   20 +-
 include/configs/vf610twr.h                  |   20 +-
 39 files changed, 1049 insertions(+), 229 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-imx/cpu.h
 create mode 100644 drivers/pci/pcie_imx.c



-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-01-17  9:26 Stefano Babic
  2014-01-17 17:27 ` Fabio Estevam
@ 2014-01-20 22:58 ` Tom Rini
  1 sibling, 0 replies; 307+ messages in thread
From: Tom Rini @ 2014-01-20 22:58 UTC (permalink / raw)
  To: u-boot

On Fri, Jan 17, 2014 at 10:26:24AM +0100, Stefano Babic wrote:

> Hi Albert,
> 
> Commit 022298278 (mx6: soc: Disable VDDPU regulator) does not let boot
> kernel with enabled GPU (i.MX6). It is unclear at the moment if the fix
> should be done in U-Boot or in kernel, so it is better to revert it for
> the release. Please pull from u-boot-imx, thanks !
> 
> The following changes since commit 3a21773129f6ef218f1978d05a1a5d5cf6801ab6:
> 
>   mx6: Add initial support for the Hummingboard solo (2014-01-15
> 10:33:25 +0100)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to be2a3bb39adf1fdd274fc427e30ef62eb86441a1:
> 
>   mx6: Revert "mx6: soc: Disable VDDPU regulator" (2014-01-17 10:16:48
> +0100)
> 
> ----------------------------------------------------------------
> Fabio Estevam (1):
>       mx6: Revert "mx6: soc: Disable VDDPU regulator"
> 
>  arch/arm/cpu/armv7/mx6/soc.c             |   41
> ------------------------------
>  arch/arm/include/asm/arch-mx6/crm_regs.h |    1 -
>  arch/arm/include/asm/arch-mx6/imx-regs.h |   23 -----------------
>  3 files changed, 65 deletions(-)

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140120/d9a06577/attachment.pgp>

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-01-17 22:03   ` Tom Rini
@ 2014-01-18 12:20     ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-01-18 12:20 UTC (permalink / raw)
  To: u-boot

Hi Tom,

On Fri, 17 Jan 2014 17:03:58 -0500, Tom Rini <trini@ti.com> wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> On 01/17/2014 12:27 PM, Fabio Estevam wrote:
> > Hi Tom,
> > 
> > On Fri, Jan 17, 2014 at 7:26 AM, Stefano Babic <sbabic@denx.de>
> > wrote:
> >> Hi Albert,
> >> 
> >> Commit 022298278 (mx6: soc: Disable VDDPU regulator) does not let
> >> boot kernel with enabled GPU (i.MX6). It is unclear at the moment
> >> if the fix should be done in U-Boot or in kernel, so it is better
> >> to revert it for the release. Please pull from u-boot-imx, thanks
> >> !
> > 
> > In case Albert does not have time to send you his pull request,
> > could you please apply this one?
> 
> If Albert doesn't have one up for it soon I will, yes, thanks.

I'd prefer that you apply it directly -- I'm a bit busy right now.

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-01-17 17:27 ` Fabio Estevam
@ 2014-01-17 22:03   ` Tom Rini
  2014-01-18 12:20     ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Tom Rini @ 2014-01-17 22:03 UTC (permalink / raw)
  To: u-boot

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 01/17/2014 12:27 PM, Fabio Estevam wrote:
> Hi Tom,
> 
> On Fri, Jan 17, 2014 at 7:26 AM, Stefano Babic <sbabic@denx.de>
> wrote:
>> Hi Albert,
>> 
>> Commit 022298278 (mx6: soc: Disable VDDPU regulator) does not let
>> boot kernel with enabled GPU (i.MX6). It is unclear at the moment
>> if the fix should be done in U-Boot or in kernel, so it is better
>> to revert it for the release. Please pull from u-boot-imx, thanks
>> !
> 
> In case Albert does not have time to send you his pull request,
> could you please apply this one?

If Albert doesn't have one up for it soon I will, yes, thanks.

- -- 
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
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=lOOf
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-01-17  9:26 Stefano Babic
@ 2014-01-17 17:27 ` Fabio Estevam
  2014-01-17 22:03   ` Tom Rini
  2014-01-20 22:58 ` Tom Rini
  1 sibling, 1 reply; 307+ messages in thread
From: Fabio Estevam @ 2014-01-17 17:27 UTC (permalink / raw)
  To: u-boot

Hi Tom,

On Fri, Jan 17, 2014 at 7:26 AM, Stefano Babic <sbabic@denx.de> wrote:
> Hi Albert,
>
> Commit 022298278 (mx6: soc: Disable VDDPU regulator) does not let boot
> kernel with enabled GPU (i.MX6). It is unclear at the moment if the fix
> should be done in U-Boot or in kernel, so it is better to revert it for
> the release. Please pull from u-boot-imx, thanks !

In case Albert does not have time to send you his pull request, could
you please apply this one?

Thanks,

Fabio Estevam

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2014-01-17  9:26 Stefano Babic
  2014-01-17 17:27 ` Fabio Estevam
  2014-01-20 22:58 ` Tom Rini
  0 siblings, 2 replies; 307+ messages in thread
From: Stefano Babic @ 2014-01-17  9:26 UTC (permalink / raw)
  To: u-boot

Hi Albert,

Commit 022298278 (mx6: soc: Disable VDDPU regulator) does not let boot
kernel with enabled GPU (i.MX6). It is unclear at the moment if the fix
should be done in U-Boot or in kernel, so it is better to revert it for
the release. Please pull from u-boot-imx, thanks !

The following changes since commit 3a21773129f6ef218f1978d05a1a5d5cf6801ab6:

  mx6: Add initial support for the Hummingboard solo (2014-01-15
10:33:25 +0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to be2a3bb39adf1fdd274fc427e30ef62eb86441a1:

  mx6: Revert "mx6: soc: Disable VDDPU regulator" (2014-01-17 10:16:48
+0100)

----------------------------------------------------------------
Fabio Estevam (1):
      mx6: Revert "mx6: soc: Disable VDDPU regulator"

 arch/arm/cpu/armv7/mx6/soc.c             |   41
------------------------------
 arch/arm/include/asm/arch-mx6/crm_regs.h |    1 -
 arch/arm/include/asm/arch-mx6/imx-regs.h |   23 -----------------
 3 files changed, 65 deletions(-)

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-01-15  9:43 Stefano Babic
@ 2014-01-15 15:14 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-01-15 15:14 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Wed, 15 Jan 2014 10:43:21 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> still a couple of patches for the release. Please pull from u-boot-imx,
> thanks !
> 
> The following changes since commit a6bbee66197759f790de83181924bf1d2cf482b2:
> 
>   mx6slevk: Include "mx6_common.h" (2014-01-13 11:52:28 +0100)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 3a21773129f6ef218f1978d05a1a5d5cf6801ab6:
> 
>   mx6: Add initial support for the Hummingboard solo (2014-01-15
> 10:33:25 +0100)
> 
> ----------------------------------------------------------------
> Fabio Estevam (2):
>       mx6: clock: Pass the frequency as argument of
> enable_fec_anatop_clock()
>       mx6: Add initial support for the Hummingboard solo
> 
>  arch/arm/cpu/armv7/mx6/clock.c                     |    8 +-
>  arch/arm/include/asm/arch-mx6/clock.h              |    9 +-
>  arch/arm/include/asm/arch-mx6/imx-regs.h           |    4 +
>  board/freescale/mx6slevk/mx6slevk.c                |    2 +-
>  board/solidrun/hummingboard/Makefile               |    9 +
>  board/solidrun/hummingboard/README                 |   40 ++++
>  board/solidrun/hummingboard/hummingboard.c         |  187 ++++++++++++++++
>  board/solidrun/hummingboard/solo.cfg               |   25 +++
>  board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg   |   74 +++++++
>  board/solidrun/mx6-microsom/clocks.cfg             |   33 +++
>  .../mx6-microsom/ddr-800mhz-32bit-setup.cfg        |   76 +++++++
>  boards.cfg                                         |    1 +
>  include/configs/hummingboard.h                     |  226
> ++++++++++++++++++++
>  13 files changed, 691 insertions(+), 3 deletions(-)
>  create mode 100644 board/solidrun/hummingboard/Makefile
>  create mode 100644 board/solidrun/hummingboard/README
>  create mode 100644 board/solidrun/hummingboard/hummingboard.c
>  create mode 100644 board/solidrun/hummingboard/solo.cfg
>  create mode 100644 board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg
>  create mode 100644 board/solidrun/mx6-microsom/clocks.cfg
>  create mode 100644 board/solidrun/mx6-microsom/ddr-800mhz-32bit-setup.cfg
>  create mode 100644 include/configs/hummingboard.h
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2014-01-15  9:43 Stefano Babic
  2014-01-15 15:14 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-01-15  9:43 UTC (permalink / raw)
  To: u-boot

Hi Albert,

still a couple of patches for the release. Please pull from u-boot-imx,
thanks !

The following changes since commit a6bbee66197759f790de83181924bf1d2cf482b2:

  mx6slevk: Include "mx6_common.h" (2014-01-13 11:52:28 +0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 3a21773129f6ef218f1978d05a1a5d5cf6801ab6:

  mx6: Add initial support for the Hummingboard solo (2014-01-15
10:33:25 +0100)

----------------------------------------------------------------
Fabio Estevam (2):
      mx6: clock: Pass the frequency as argument of
enable_fec_anatop_clock()
      mx6: Add initial support for the Hummingboard solo

 arch/arm/cpu/armv7/mx6/clock.c                     |    8 +-
 arch/arm/include/asm/arch-mx6/clock.h              |    9 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h           |    4 +
 board/freescale/mx6slevk/mx6slevk.c                |    2 +-
 board/solidrun/hummingboard/Makefile               |    9 +
 board/solidrun/hummingboard/README                 |   40 ++++
 board/solidrun/hummingboard/hummingboard.c         |  187 ++++++++++++++++
 board/solidrun/hummingboard/solo.cfg               |   25 +++
 board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg   |   74 +++++++
 board/solidrun/mx6-microsom/clocks.cfg             |   33 +++
 .../mx6-microsom/ddr-800mhz-32bit-setup.cfg        |   76 +++++++
 boards.cfg                                         |    1 +
 include/configs/hummingboard.h                     |  226
++++++++++++++++++++
 13 files changed, 691 insertions(+), 3 deletions(-)
 create mode 100644 board/solidrun/hummingboard/Makefile
 create mode 100644 board/solidrun/hummingboard/README
 create mode 100644 board/solidrun/hummingboard/hummingboard.c
 create mode 100644 board/solidrun/hummingboard/solo.cfg
 create mode 100644 board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg
 create mode 100644 board/solidrun/mx6-microsom/clocks.cfg
 create mode 100644 board/solidrun/mx6-microsom/ddr-800mhz-32bit-setup.cfg
 create mode 100644 include/configs/hummingboard.h


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2014-01-14  9:34 Stefano Babic
@ 2014-01-14 13:03 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2014-01-14 13:03 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Tue, 14 Jan 2014 10:34:19 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks.
> 
> The following changes since commit 4b0561d84198f8d696fd51cfc27aeac8c7482a8c:
> 
>   Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> (2014-01-06 09:32:42 +0100)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to a6bbee66197759f790de83181924bf1d2cf482b2:
> 
>   mx6slevk: Include "mx6_common.h" (2014-01-13 11:52:28 +0100)
> 
> ----------------------------------------------------------------
> Christian Gmeiner (1):
>       imx6: make use of lldiv(..)
> 
> Fabio Estevam (7):
>       wandboard: Return from cpu_eth_init() directly
>       titanium: Return from cpu_eth_init() directly
>       mx6qarm2: Remove unneeded error message when cpu_eth_init() fails
>       mx6qsabreauto: Return from cpu_eth_init() directly
>       mx6sabresd: Return from cpu_eth_init() directly
>       mx6slevk: Return from cpu_eth_init() directly
>       mx6slevk: Include "mx6_common.h"
> 
> John Weber (1):
>       wandboard: Set default environment to use zImage
> 
> Otavio Salvador (1):
>       mx6sabresd: Add eMMC specific environment to allow U-Boot update
> 
>  arch/arm/cpu/armv7/mx6/clock.c                |    3 ++-
>  board/barco/titanium/titanium.c               |    8 +-------
>  board/freescale/mx6qarm2/mx6qarm2.c           |    7 ++-----
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c |    8 +-------
>  board/freescale/mx6sabresd/mx6sabresd.c       |    8 +-------
>  board/freescale/mx6slevk/mx6slevk.c           |   10 +---------
>  board/wandboard/wandboard.c                   |    8 +-------
>  include/configs/mx6sabre_common.h             |   23
> +++++++++++++++++++++++
>  include/configs/mx6sabresd.h                  |    2 ++
>  include/configs/mx6slevk.h                    |    1 +
>  include/configs/wandboard.h                   |   20 ++++++++++----------
>  11 files changed, 45 insertions(+), 53 deletions(-)
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2014-01-14  9:34 Stefano Babic
  2014-01-14 13:03 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2014-01-14  9:34 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit 4b0561d84198f8d696fd51cfc27aeac8c7482a8c:

  Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
(2014-01-06 09:32:42 +0100)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to a6bbee66197759f790de83181924bf1d2cf482b2:

  mx6slevk: Include "mx6_common.h" (2014-01-13 11:52:28 +0100)

----------------------------------------------------------------
Christian Gmeiner (1):
      imx6: make use of lldiv(..)

Fabio Estevam (7):
      wandboard: Return from cpu_eth_init() directly
      titanium: Return from cpu_eth_init() directly
      mx6qarm2: Remove unneeded error message when cpu_eth_init() fails
      mx6qsabreauto: Return from cpu_eth_init() directly
      mx6sabresd: Return from cpu_eth_init() directly
      mx6slevk: Return from cpu_eth_init() directly
      mx6slevk: Include "mx6_common.h"

John Weber (1):
      wandboard: Set default environment to use zImage

Otavio Salvador (1):
      mx6sabresd: Add eMMC specific environment to allow U-Boot update

 arch/arm/cpu/armv7/mx6/clock.c                |    3 ++-
 board/barco/titanium/titanium.c               |    8 +-------
 board/freescale/mx6qarm2/mx6qarm2.c           |    7 ++-----
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |    8 +-------
 board/freescale/mx6sabresd/mx6sabresd.c       |    8 +-------
 board/freescale/mx6slevk/mx6slevk.c           |   10 +---------
 board/wandboard/wandboard.c                   |    8 +-------
 include/configs/mx6sabre_common.h             |   23
+++++++++++++++++++++++
 include/configs/mx6sabresd.h                  |    2 ++
 include/configs/mx6slevk.h                    |    1 +
 include/configs/wandboard.h                   |   20 ++++++++++----------
 11 files changed, 45 insertions(+), 53 deletions(-)


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2014-01-02 16:25 Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2014-01-02 16:25 UTC (permalink / raw)
  To: u-boot

Hi Albert,

my first pull-request in 2014 ! Please pull from u-boot-imx, thanks !

The following changes since commit 56eb3da43fab5990a4b7bc118b76c7cae2ceb140:

  arm, am335x: update for the siemens boards (2013-11-12 09:53:59 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 02229827804980e3cce48bf4fce43699046bcf7e:

  mx6: soc: Disable VDDPU regulator (2014-01-02 17:16:51 +0100)

----------------------------------------------------------------
Eric Nelson (8):
      i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents
      i.MX6DQ/DLS: remove useless mux/pad declarations
      i.MX6DQ: Add Pinmux settings that are present in mainline and
Dual-Lite/Solo
      i.MX6DQ/DLS: remove unused pad declarations
      i.MX6DQ/DLS: whitespace: Align IOMUX_PAD column in declarations
      imx-common: remove extraneous semicolon from macro
      i.MX6 (DQ/DLS): use macros for mux and pad declarations
      ARM: mx6: Update non-Freescale boards to include CPU errata.

Fabio Estevam (24):
      configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
      wandboard: Return the error immediately when ipuv3_fb_init() fails
      wandboard: Return the error when cpu_eth_init() fails
      titanium: Return the error when cpu_eth_init() fails
      nitrogen6x: Remove unused OCOTP options
      mx51evk: Fix pmic_init() argument
      mx31pdk: Fix pmic_init() argument
      efikamx: Fix pmic_init() argument
      power: power_fsl: Pass p->bus in the same way for SPI and I2C cases
      mx6sabresd: Fix wrong colors in LVDS splash
      mx6sabresd: Add SPI NOR support
      imx: Explicitly pass the I2C bus number in pmic_init()
      configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
      mx6: clock: Fix the calculation of PLL_ENET frequency
      mx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK signals
      mx6sabresd: Fix LVDS width and color format
      doc: README.fuse: Add an example on how to use the fuse API on mx6q
      mx6sabre_common.h: Add CONFIG_CMD_FUSE support
      mx6: soc: Staticize set_vddsoc()
      mx6: soc: Clear the LDO ramp values up prior to setting the LDO
voltages
      mx6: soc: Set the VDDSOC at 1.175 V
      mx6: soc: Introduce set_ldo_voltage()
      mx6: soc: Add the required LDO ramp up delay
      mx6: soc: Disable VDDPU regulator

Frank Li (1):
      imx6: fix random hang when download by usb

Giuseppe Pagano (5):
      udoo: Move and optimize platform register setting.
      udoo: Add ethernet support (FEC + Micrel KSZ9031).
      udoo: Fix watchdog during kernel boot.
      nitrogen6x: Move setup_sata to common part
      udoo: Add SATA support on uDoo Board.

Liu Ying (1):
      MX6 SabreSD: Use readl() to read the CCM_CCGR3 register

Marek Vasut (3):
      Net: FEC: Fix huge memory leak
      ARM: mx53: video: Add IPUv3 LCD support for M53EVK
      ARM: mxs: tools: Fix errno handling in strtoul() invocation

Michael Heimpold (1):
      mxs_gpio: fix the handling in gpio_direction_output()

Stefan Roese (1):
      mx6: titanium: Move BSP code to barco board directory

Stefano Babic (1):
      MX6: fix sata compilation for i.MX6

 arch/arm/cpu/armv7/mx6/clock.c                   |    2 +-
 arch/arm/cpu/armv7/mx6/soc.c                     |  110 +-
 arch/arm/imx-common/Makefile                     |    3 +
 arch/arm/imx-common/cpu.c                        |    4 +-
 arch/arm/imx-common/sata.c                       |   34 +
 arch/arm/include/asm/arch-mx6/crm_regs.h         |    1 +
 arch/arm/include/asm/arch-mx6/imx-regs.h         |   23 +
 arch/arm/include/asm/arch-mx6/mx6-pins.h         |   33 +-
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h       | 2728
+++++++++-------------
 arch/arm/include/asm/arch-mx6/mx6q_pins.h        | 2642
++++++++-------------
 arch/arm/include/asm/arch-mx6/sys_proto.h        |    2 -
 arch/arm/include/asm/imx-common/sata.h           |   16 +
 board/{freescale => barco}/titanium/Makefile     |    0
 board/{freescale => barco}/titanium/imximage.cfg |    0
 board/{freescale => barco}/titanium/titanium.c   |  110 +-
 board/boundary/nitrogen6x/nitrogen6x.c           |  197 +-
 board/congatec/cgtqmx6eval/cgtqmx6eval.c         |   40 +-
 board/denx/m53evk/m53evk.c                       |   73 +
 board/freescale/mx25pdk/mx25pdk.c                |    2 +-
 board/freescale/mx31pdk/mx31pdk.c                |    2 +-
 board/freescale/mx35pdk/mx35pdk.c                |    2 +-
 board/freescale/mx51evk/mx51evk.c                |    2 +-
 board/freescale/mx53evk/mx53evk.c                |    2 +-
 board/freescale/mx53loco/mx53loco.c              |    2 +-
 board/freescale/mx6qarm2/mx6qarm2.c              |   68 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c    |   62 +-
 board/freescale/mx6sabresd/mx6sabresd.c          |  155 +-
 board/genesi/mx51_efikamx/efikamx.c              |    2 +-
 board/udoo/1066mhz_4x256mx16.cfg                 |   55 +
 board/udoo/clocks.cfg                            |   32 +
 board/udoo/ddr-setup.cfg                         |   87 +
 board/udoo/udoo.c                                |  165 +-
 board/udoo/udoo.cfg                              |   29 +
 board/wandboard/wandboard.c                      |   60 +-
 boards.cfg                                       |    4 +-
 doc/README.imx6                                  |   76 +
 drivers/gpio/mxs_gpio.c                          |    4 +-
 drivers/net/fec_mxc.c                            |  177 +-
 drivers/power/power_fsl.c                        |    3 +-
 include/configs/imx31_phycore.h                  |    1 -
 include/configs/m53evk.h                         |   16 +
 include/configs/mx25pdk.h                        |    2 -
 include/configs/mx28evk.h                        |    1 -
 include/configs/mx31pdk.h                        |    1 -
 include/configs/mx35pdk.h                        |    2 -
 include/configs/mx51evk.h                        |    1 -
 include/configs/mx53ard.h                        |    1 -
 include/configs/mx53evk.h                        |    2 -
 include/configs/mx53loco.h                       |    2 -
 include/configs/mx53smd.h                        |    2 -
 include/configs/mx6_common.h                     |    1 +
 include/configs/mx6qarm2.h                       |    1 -
 include/configs/mx6sabre_common.h                |   18 +-
 include/configs/nitrogen6x.h                     |   11 +-
 include/configs/titanium.h                       |    1 +
 include/configs/udoo.h                           |   29 +
 include/configs/wandboard.h                      |    1 +
 include/micrel.h                                 |    5 +
 tools/mxsimage.c                                 |    1 +
 59 files changed, 3346 insertions(+), 3762 deletions(-)
 create mode 100644 arch/arm/imx-common/sata.c
 create mode 100644 arch/arm/include/asm/imx-common/sata.h
 rename board/{freescale => barco}/titanium/Makefile (100%)
 rename board/{freescale => barco}/titanium/imximage.cfg (100%)
 rename board/{freescale => barco}/titanium/titanium.c (66%)
 create mode 100644 board/udoo/1066mhz_4x256mx16.cfg
 create mode 100644 board/udoo/clocks.cfg
 create mode 100644 board/udoo/ddr-setup.cfg
 create mode 100644 board/udoo/udoo.cfg

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-09-27 12:11 Stefano Babic
@ 2013-10-02 13:36 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2013-10-02 13:36 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Fri, 27 Sep 2013 14:11:56 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 8386ca8bea7a6a8469c3b6a99313afb642e6cbeb:
> 
>   Revert "standalone-examples: support custom GCC lib" (2013-09-12
> 10:27:29 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to ce7a7f5e6bda35d7d0972be07b6983552d1a2cb2:
> 
>   i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID (2013-09-27 13:53:35
> +0200)
> 
> ----------------------------------------------------------------
> Andrew Gabbasov (1):
>       mx6: Fix calculation of emi_slow clock rate
> 
> Elie De Brauwer (1):
>       mxs_nand: Fix ECC strength for NAND flash with OOB size of 224
> 
> Eric Nelson (2):
>       i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
>       i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID
> 
> Fabio Estevam (17):
>       mx6sabresd: Add LVDS splash screen support
>       wandboard: Use imx6dl-wandboard.dtb for the solo version
>       mx6sabresd: Avoid hang when HDMI cable is not connected
>       mx6sabresd: Reset counter to prevent error message
>       mmc: fsl_esdhc: Check the result from malloc()
>       mx35pdk: Remove CONFIG_SYS_CACHELINE_SIZE
>       mx6sabresd: Return error if cpu_eth_init() fails
>       mx6qsabreauto: Return error if cpu_eth_init() fails
>       net: fec_mxc: Add support for mx6 solo-lite
>       mx6slevk: Add Ethernet support
>       mx28evk: Fix checkpatch warning
>       doc: README.mxs: Add instruction to install 'libssl-dev'
>       mx6sabresd: Fix the fdt file for the mx6dl version
>       net: fec_mxc: Fix timeouts during tftp transfer
>       mx28evk: Propagate the error if cpu_eth_init() fails
>       mx28evk: Propagate the error if cpu_eth_init() fails
>       mx35pdk: Fix error handling in board_late_init()
> 
> Marek Vasut (6):
>       tools: mxsboot: Mark the FCB pages as valid
>       ARM: mxs: Sort the mx23evk and mx23_olinuxino
>       ARM: mxs: Document the power block initialization
>       ARM: mxs: Receive r0 and r1 passed from BootROM
>       ARM: mxs: Add Creative ZEN XFi3 board
>       ARM: mxs: Add SanDisk Sansa Fuze+ board
> 
> Markus Niebel (1):
>       ARM: arch-mx6: fix PLL2_PFD2_FREQ
> 
> Pierre Aubert (1):
>       mx6: Fix use of improper value in enable_ipu_clock
> 
> Robert Winkler (1):
>       imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skip
> 
> Stefano Babic (1):
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
> 
> York Sun (1):
>       tools/imximage.c: Fix compiling warning
> 
> trem (3):
>       mx27: add missing constant for mx27
>       apf27: add support for the armadeus APF27 board
>       apf27: add FPGA support for the apf27 board
> 
>  arch/arm/cpu/arm926ejs/mx27/asm-offsets.c     |    5 +
>  arch/arm/cpu/arm926ejs/mxs/spl_boot.c         |    5 +-
>  arch/arm/cpu/arm926ejs/mxs/spl_power_init.c   |  209 +++++++++++
>  arch/arm/cpu/arm926ejs/mxs/start.S            |   50 ++-
>  arch/arm/cpu/armv7/mx6/clock.c                |   40 +-
>  arch/arm/include/asm/arch-mx27/imx-regs.h     |    6 +-
>  arch/arm/include/asm/arch-mx6/clock.h         |    1 +
>  arch/arm/include/asm/arch-mx6/crm_regs.h      |    2 +-
>  arch/arm/include/asm/arch-mx6/iomux.h         |    5 +
>  arch/arm/include/asm/arch-mx6/mx6dl_pins.h    |    6 +-
>  arch/arm/include/asm/arch-mx6/mx6q_pins.h     |    1 +
>  arch/arm/include/asm/arch-mx6/mx6sl_pins.h    |   12 +
>  arch/arm/include/asm/arch-mxs/sys_proto.h     |    5 +-
>  board/armadeus/apf27/Makefile                 |   33 ++
>  board/armadeus/apf27/apf27.c                  |  256 +++++++++++++
>  board/armadeus/apf27/apf27.h                  |  489
> +++++++++++++++++++++++++
>  board/armadeus/apf27/fpga.c                   |  224 +++++++++++
>  board/armadeus/apf27/fpga.h                   |   25 ++
>  board/armadeus/apf27/lowlevel_init.S          |  168 +++++++++
>  board/bluegiga/apx4devkit/spl_boot.c          |    4 +-
>  board/boundary/nitrogen6x/nitrogen6x.c        |    4 +-
>  board/creative/xfi3/Makefile                  |   31 ++
>  board/creative/xfi3/spl_boot.c                |  134 +++++++
>  board/creative/xfi3/xfi3.c                    |  224 +++++++++++
>  board/denx/m28evk/m28evk.c                    |    2 +
>  board/denx/m28evk/spl_boot.c                  |    4 +-
>  board/freescale/mx23evk/spl_boot.c            |    4 +-
>  board/freescale/mx28evk/iomux.c               |    4 +-
>  board/freescale/mx28evk/mx28evk.c             |    4 +-
>  board/freescale/mx35pdk/mx35pdk.c             |   10 +-
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c |    2 +-
>  board/freescale/mx6sabresd/mx6sabresd.c       |  169 +++++++--
>  board/freescale/mx6slevk/mx6slevk.c           |   68 ++++
>  board/olimex/mx23_olinuxino/spl_boot.c        |    4 +-
>  board/sandisk/sansa_fuze_plus/Makefile        |   31 ++
>  board/sandisk/sansa_fuze_plus/sfp.c           |  388 ++++++++++++++++++++
>  board/sandisk/sansa_fuze_plus/spl_boot.c      |  140 +++++++
>  board/schulercontrol/sc_sps_1/spl_boot.c      |    4 +-
>  boards.cfg                                    |    3 +
>  doc/README.mxs                                |    5 +
>  drivers/mmc/fsl_esdhc.c                       |    2 +
>  drivers/mtd/nand/mxs_nand.c                   |    3 +
>  drivers/net/fec_mxc.c                         |    4 +-
>  drivers/net/fec_mxc.h                         |    4 +-
>  include/configs/apf27.h                       |  388 ++++++++++++++++++++
>  include/configs/mx35pdk.h                     |    1 -
>  include/configs/mx6sabresd.h                  |    4 +
>  include/configs/mx6slevk.h                    |   14 +
>  include/configs/sansa_fuze_plus.h             |   70 ++++
>  include/configs/wandboard.h                   |    4 +-
>  include/configs/xfi3.h                        |   69 ++++
>  tools/imximage.c                              |    8 +-
>  tools/mxsboot.c                               |   10 +-
>  53 files changed, 3269 insertions(+), 93 deletions(-)
>  create mode 100644 board/armadeus/apf27/Makefile
>  create mode 100644 board/armadeus/apf27/apf27.c
>  create mode 100644 board/armadeus/apf27/apf27.h
>  create mode 100644 board/armadeus/apf27/fpga.c
>  create mode 100644 board/armadeus/apf27/fpga.h
>  create mode 100644 board/armadeus/apf27/lowlevel_init.S
>  create mode 100644 board/creative/xfi3/Makefile
>  create mode 100644 board/creative/xfi3/spl_boot.c
>  create mode 100644 board/creative/xfi3/xfi3.c
>  create mode 100644 board/sandisk/sansa_fuze_plus/Makefile
>  create mode 100644 board/sandisk/sansa_fuze_plus/sfp.c
>  create mode 100644 board/sandisk/sansa_fuze_plus/spl_boot.c
>  create mode 100644 include/configs/apf27.h
>  create mode 100644 include/configs/sansa_fuze_plus.h
>  create mode 100644 include/configs/xfi3.h
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-09-27 12:11 Stefano Babic
  2013-10-02 13:36 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2013-09-27 12:11 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !

The following changes since commit 8386ca8bea7a6a8469c3b6a99313afb642e6cbeb:

  Revert "standalone-examples: support custom GCC lib" (2013-09-12
10:27:29 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to ce7a7f5e6bda35d7d0972be07b6983552d1a2cb2:

  i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID (2013-09-27 13:53:35
+0200)

----------------------------------------------------------------
Andrew Gabbasov (1):
      mx6: Fix calculation of emi_slow clock rate

Elie De Brauwer (1):
      mxs_nand: Fix ECC strength for NAND flash with OOB size of 224

Eric Nelson (2):
      i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
      i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID

Fabio Estevam (17):
      mx6sabresd: Add LVDS splash screen support
      wandboard: Use imx6dl-wandboard.dtb for the solo version
      mx6sabresd: Avoid hang when HDMI cable is not connected
      mx6sabresd: Reset counter to prevent error message
      mmc: fsl_esdhc: Check the result from malloc()
      mx35pdk: Remove CONFIG_SYS_CACHELINE_SIZE
      mx6sabresd: Return error if cpu_eth_init() fails
      mx6qsabreauto: Return error if cpu_eth_init() fails
      net: fec_mxc: Add support for mx6 solo-lite
      mx6slevk: Add Ethernet support
      mx28evk: Fix checkpatch warning
      doc: README.mxs: Add instruction to install 'libssl-dev'
      mx6sabresd: Fix the fdt file for the mx6dl version
      net: fec_mxc: Fix timeouts during tftp transfer
      mx28evk: Propagate the error if cpu_eth_init() fails
      mx28evk: Propagate the error if cpu_eth_init() fails
      mx35pdk: Fix error handling in board_late_init()

Marek Vasut (6):
      tools: mxsboot: Mark the FCB pages as valid
      ARM: mxs: Sort the mx23evk and mx23_olinuxino
      ARM: mxs: Document the power block initialization
      ARM: mxs: Receive r0 and r1 passed from BootROM
      ARM: mxs: Add Creative ZEN XFi3 board
      ARM: mxs: Add SanDisk Sansa Fuze+ board

Markus Niebel (1):
      ARM: arch-mx6: fix PLL2_PFD2_FREQ

Pierre Aubert (1):
      mx6: Fix use of improper value in enable_ipu_clock

Robert Winkler (1):
      imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skip

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot-arm

York Sun (1):
      tools/imximage.c: Fix compiling warning

trem (3):
      mx27: add missing constant for mx27
      apf27: add support for the armadeus APF27 board
      apf27: add FPGA support for the apf27 board

 arch/arm/cpu/arm926ejs/mx27/asm-offsets.c     |    5 +
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c         |    5 +-
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c   |  209 +++++++++++
 arch/arm/cpu/arm926ejs/mxs/start.S            |   50 ++-
 arch/arm/cpu/armv7/mx6/clock.c                |   40 +-
 arch/arm/include/asm/arch-mx27/imx-regs.h     |    6 +-
 arch/arm/include/asm/arch-mx6/clock.h         |    1 +
 arch/arm/include/asm/arch-mx6/crm_regs.h      |    2 +-
 arch/arm/include/asm/arch-mx6/iomux.h         |    5 +
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h    |    6 +-
 arch/arm/include/asm/arch-mx6/mx6q_pins.h     |    1 +
 arch/arm/include/asm/arch-mx6/mx6sl_pins.h    |   12 +
 arch/arm/include/asm/arch-mxs/sys_proto.h     |    5 +-
 board/armadeus/apf27/Makefile                 |   33 ++
 board/armadeus/apf27/apf27.c                  |  256 +++++++++++++
 board/armadeus/apf27/apf27.h                  |  489
+++++++++++++++++++++++++
 board/armadeus/apf27/fpga.c                   |  224 +++++++++++
 board/armadeus/apf27/fpga.h                   |   25 ++
 board/armadeus/apf27/lowlevel_init.S          |  168 +++++++++
 board/bluegiga/apx4devkit/spl_boot.c          |    4 +-
 board/boundary/nitrogen6x/nitrogen6x.c        |    4 +-
 board/creative/xfi3/Makefile                  |   31 ++
 board/creative/xfi3/spl_boot.c                |  134 +++++++
 board/creative/xfi3/xfi3.c                    |  224 +++++++++++
 board/denx/m28evk/m28evk.c                    |    2 +
 board/denx/m28evk/spl_boot.c                  |    4 +-
 board/freescale/mx23evk/spl_boot.c            |    4 +-
 board/freescale/mx28evk/iomux.c               |    4 +-
 board/freescale/mx28evk/mx28evk.c             |    4 +-
 board/freescale/mx35pdk/mx35pdk.c             |   10 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |    2 +-
 board/freescale/mx6sabresd/mx6sabresd.c       |  169 +++++++--
 board/freescale/mx6slevk/mx6slevk.c           |   68 ++++
 board/olimex/mx23_olinuxino/spl_boot.c        |    4 +-
 board/sandisk/sansa_fuze_plus/Makefile        |   31 ++
 board/sandisk/sansa_fuze_plus/sfp.c           |  388 ++++++++++++++++++++
 board/sandisk/sansa_fuze_plus/spl_boot.c      |  140 +++++++
 board/schulercontrol/sc_sps_1/spl_boot.c      |    4 +-
 boards.cfg                                    |    3 +
 doc/README.mxs                                |    5 +
 drivers/mmc/fsl_esdhc.c                       |    2 +
 drivers/mtd/nand/mxs_nand.c                   |    3 +
 drivers/net/fec_mxc.c                         |    4 +-
 drivers/net/fec_mxc.h                         |    4 +-
 include/configs/apf27.h                       |  388 ++++++++++++++++++++
 include/configs/mx35pdk.h                     |    1 -
 include/configs/mx6sabresd.h                  |    4 +
 include/configs/mx6slevk.h                    |   14 +
 include/configs/sansa_fuze_plus.h             |   70 ++++
 include/configs/wandboard.h                   |    4 +-
 include/configs/xfi3.h                        |   69 ++++
 tools/imximage.c                              |    8 +-
 tools/mxsboot.c                               |   10 +-
 53 files changed, 3269 insertions(+), 93 deletions(-)
 create mode 100644 board/armadeus/apf27/Makefile
 create mode 100644 board/armadeus/apf27/apf27.c
 create mode 100644 board/armadeus/apf27/apf27.h
 create mode 100644 board/armadeus/apf27/fpga.c
 create mode 100644 board/armadeus/apf27/fpga.h
 create mode 100644 board/armadeus/apf27/lowlevel_init.S
 create mode 100644 board/creative/xfi3/Makefile
 create mode 100644 board/creative/xfi3/spl_boot.c
 create mode 100644 board/creative/xfi3/xfi3.c
 create mode 100644 board/sandisk/sansa_fuze_plus/Makefile
 create mode 100644 board/sandisk/sansa_fuze_plus/sfp.c
 create mode 100644 board/sandisk/sansa_fuze_plus/spl_boot.c
 create mode 100644 include/configs/apf27.h
 create mode 100644 include/configs/sansa_fuze_plus.h
 create mode 100644 include/configs/xfi3.h

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-09-03  8:20 Stefano Babic
@ 2013-09-05 10:04 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2013-09-05 10:04 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Tue, 03 Sep 2013 10:20:44 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 326ea986ac150acdc7656d57fca647db80b50158:
> 
>   Merge git://git.denx.de/u-boot-arm (2013-07-31 11:30:38 +0200)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 8467faef7fce8c5faad7224b7737a58e16c52186:
> 
>   i.MX6: Set and clear the gating bits for Phase Fractional Dividers
> (2013-08-31 18:09:37 +0200)
> 
> ----------------------------------------------------------------
> Amaury Pouly (1):
>       mmc: mxsmmc: Enable MMC HC support
> 
> Andreas Wass (2):
>       ARM: mxs: Added application UART driver
>       ARM: mxs: Add mx28evk_auart_console target
> 
> Eric Nelson (6):
>       i.MX6: nitrogen6x: force HDMI onto IPU0/DI0
>       fec_mxc: set ethaddr if fuses burned and not previously set
>       i.MX6: Add convenience macros cpu_type(rev) and is_cpu_type(cpu)
>       i.MX6: Correct ANATOP_PFD (Phase Fractional Divider) register
> declarations
>       i.MX6: nitrogen6x: Don't bother setting PLL3(480) PFD1 divisor
>       i.MX6: Set and clear the gating bits for Phase Fractional Dividers
> 
> Hector Palacios (1):
>       ARM: mxs: rename function that sets AUTO_RESTART flag
> 
> Marek Vasut (3):
>       ARM: mxs: tools: Add mkimage support for MXS bootstream
>       tools: Sort lists of files in Makefile
>       tools: mxsboot: Staticize functions
> 
> SARTRE Leo (1):
>       ARM: Congatec: README update
> 
> Stefano Babic (7):
>       tools: imx_header should not include flash_offset
>       tools: rename mximage_flash_offset to imximage_ivt_offset
>       tools: dynamically allocate imx_header in imximage
>       tools: add variable padding of data image in mkimage
>       tools: add padding of data image file for imximage
>       tools: add support for setting the CSF into imximage
>       imx: add status reporting for HAB status
> 
>  arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg |    6 +
>  arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg |    8 +
>  arch/arm/cpu/arm926ejs/mxs/spl_power_init.c  |    9 +-
>  arch/arm/cpu/armv7/mx6/Makefile              |    7 +-
>  arch/arm/cpu/armv7/mx6/hab.c                 |  104 ++
>  arch/arm/cpu/armv7/mx6/soc.c                 |   28 +
>  arch/arm/include/asm/arch-mx6/hab.h          |   67 +
>  arch/arm/include/asm/arch-mx6/imx-regs.h     |   37 +-
>  arch/arm/include/asm/arch-mx6/sys_proto.h    |    7 +
>  arch/arm/include/asm/arch-mxs/regs-uartapp.h |  220 +++
>  board/boundary/nitrogen6x/nitrogen6x.c       |    8 +-
>  board/congatec/cgtqmx6eval/README            |    3 +-
>  boards.cfg                                   |    1 +
>  common/image.c                               |    1 +
>  config.mk                                    |    9 +
>  doc/README.imximage                          |   30 +-
>  doc/README.mxc_hab                           |   48 +
>  doc/README.mxsimage                          |  165 ++
>  drivers/mmc/mxsmmc.c                         |    3 +-
>  drivers/net/fec_mxc.c                        |    2 +
>  drivers/serial/Makefile                      |    1 +
>  drivers/serial/mxs_auart.c                   |  151 ++
>  drivers/serial/serial.c                      |    2 +
>  include/configs/mxs.h                        |    7 +-
>  include/image.h                              |    1 +
>  tools/Makefile                               |   42 +-
>  tools/imximage.c                             |  180 +-
>  tools/imximage.h                             |   20 +-
>  tools/mkimage.c                              |   26 +-
>  tools/mkimage.h                              |    6 +-
>  tools/mxsboot.c                              |   12 +-
>  tools/mxsimage.c                             | 2347
> ++++++++++++++++++++++++++
>  tools/mxsimage.h                             |  230 +++
>  33 files changed, 3691 insertions(+), 97 deletions(-)
>  create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
>  create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg
>  create mode 100644 arch/arm/cpu/armv7/mx6/hab.c
>  create mode 100644 arch/arm/include/asm/arch-mx6/hab.h
>  create mode 100644 arch/arm/include/asm/arch-mxs/regs-uartapp.h
>  create mode 100644 doc/README.mxc_hab
>  create mode 100644 doc/README.mxsimage
>  create mode 100644 drivers/serial/mxs_auart.c
>  create mode 100644 tools/mxsimage.c
>  create mode 100644 tools/mxsimage.h
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-09-03  8:20 Stefano Babic
  2013-09-05 10:04 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2013-09-03  8:20 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !

The following changes since commit 326ea986ac150acdc7656d57fca647db80b50158:

  Merge git://git.denx.de/u-boot-arm (2013-07-31 11:30:38 +0200)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 8467faef7fce8c5faad7224b7737a58e16c52186:

  i.MX6: Set and clear the gating bits for Phase Fractional Dividers
(2013-08-31 18:09:37 +0200)

----------------------------------------------------------------
Amaury Pouly (1):
      mmc: mxsmmc: Enable MMC HC support

Andreas Wass (2):
      ARM: mxs: Added application UART driver
      ARM: mxs: Add mx28evk_auart_console target

Eric Nelson (6):
      i.MX6: nitrogen6x: force HDMI onto IPU0/DI0
      fec_mxc: set ethaddr if fuses burned and not previously set
      i.MX6: Add convenience macros cpu_type(rev) and is_cpu_type(cpu)
      i.MX6: Correct ANATOP_PFD (Phase Fractional Divider) register
declarations
      i.MX6: nitrogen6x: Don't bother setting PLL3(480) PFD1 divisor
      i.MX6: Set and clear the gating bits for Phase Fractional Dividers

Hector Palacios (1):
      ARM: mxs: rename function that sets AUTO_RESTART flag

Marek Vasut (3):
      ARM: mxs: tools: Add mkimage support for MXS bootstream
      tools: Sort lists of files in Makefile
      tools: mxsboot: Staticize functions

SARTRE Leo (1):
      ARM: Congatec: README update

Stefano Babic (7):
      tools: imx_header should not include flash_offset
      tools: rename mximage_flash_offset to imximage_ivt_offset
      tools: dynamically allocate imx_header in imximage
      tools: add variable padding of data image in mkimage
      tools: add padding of data image file for imximage
      tools: add support for setting the CSF into imximage
      imx: add status reporting for HAB status

 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg |    6 +
 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg |    8 +
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c  |    9 +-
 arch/arm/cpu/armv7/mx6/Makefile              |    7 +-
 arch/arm/cpu/armv7/mx6/hab.c                 |  104 ++
 arch/arm/cpu/armv7/mx6/soc.c                 |   28 +
 arch/arm/include/asm/arch-mx6/hab.h          |   67 +
 arch/arm/include/asm/arch-mx6/imx-regs.h     |   37 +-
 arch/arm/include/asm/arch-mx6/sys_proto.h    |    7 +
 arch/arm/include/asm/arch-mxs/regs-uartapp.h |  220 +++
 board/boundary/nitrogen6x/nitrogen6x.c       |    8 +-
 board/congatec/cgtqmx6eval/README            |    3 +-
 boards.cfg                                   |    1 +
 common/image.c                               |    1 +
 config.mk                                    |    9 +
 doc/README.imximage                          |   30 +-
 doc/README.mxc_hab                           |   48 +
 doc/README.mxsimage                          |  165 ++
 drivers/mmc/mxsmmc.c                         |    3 +-
 drivers/net/fec_mxc.c                        |    2 +
 drivers/serial/Makefile                      |    1 +
 drivers/serial/mxs_auart.c                   |  151 ++
 drivers/serial/serial.c                      |    2 +
 include/configs/mxs.h                        |    7 +-
 include/image.h                              |    1 +
 tools/Makefile                               |   42 +-
 tools/imximage.c                             |  180 +-
 tools/imximage.h                             |   20 +-
 tools/mkimage.c                              |   26 +-
 tools/mkimage.h                              |    6 +-
 tools/mxsboot.c                              |   12 +-
 tools/mxsimage.c                             | 2347
++++++++++++++++++++++++++
 tools/mxsimage.h                             |  230 +++
 33 files changed, 3691 insertions(+), 97 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
 create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg
 create mode 100644 arch/arm/cpu/armv7/mx6/hab.c
 create mode 100644 arch/arm/include/asm/arch-mx6/hab.h
 create mode 100644 arch/arm/include/asm/arch-mxs/regs-uartapp.h
 create mode 100644 doc/README.mxc_hab
 create mode 100644 doc/README.mxsimage
 create mode 100644 drivers/serial/mxs_auart.c
 create mode 100644 tools/mxsimage.c
 create mode 100644 tools/mxsimage.h


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-08-12 13:47 Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2013-08-12 13:47 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit fdce7b633a1de24456226b18527cc7900c34282a:

  gpio: omap5-uevm: Configure the tca6424 gpio expander (2013-07-30
09:21:42 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 326ea986ac150acdc7656d57fca647db80b50158:

  Merge git://git.denx.de/u-boot-arm (2013-07-31 11:30:38 +0200)

----------------------------------------------------------------

Dirk Behme (1):
      mxc_gpio: Correct the GPIO handling in gpio_direction_output()

Eric Nelson (1):
      mxc_ipuv3: fix memory alignment of framebuffer

Fabio Estevam (1):
      mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x

Marek Vasut (1):
      ARM: mxs: Consolidate configuration options

Otavio Salvador (1):
      wandboard: Use splash image at screen center by default

Pardeep Kumar Singla (2):
      mx6: Factor out common HDMI setup code
      mx6qsabresd: Add splash screen support via HDMI

Robert Winkler (2):
      imx: Add documentation for imx specific commands
      imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors

Stefano Babic (1):
      Merge git://git.denx.de/u-boot-arm

 MAINTAINERS                                        |    2 +-
 README                                             |   15 +
 arch/arm/cpu/armv7/mx6/clock.c                     |    8 +
 arch/arm/cpu/armv7/mx6/soc.c                       |   43 +
 arch/arm/imx-common/cmd_hdmidet.c                  |    3 +-
 arch/arm/include/asm/arch-mx6/clock.h              |    2 +-
 arch/arm/include/asm/arch-mx6/mxc_hdmi.h           |    8 +
 .../nitrogen6x/README.mx6qsabrelite}               |    0
 board/boundary/nitrogen6x/nitrogen6x.c             |   46 +-
 board/freescale/mx6qsabrelite/Makefile             |   28 -
 board/freescale/mx6qsabrelite/mx6qsabrelite.c      |  832
--------------------
 board/freescale/mx6sabresd/mx6sabresd.c            |   64 +-
 board/wandboard/wandboard.c                        |   44 +-
 boards.cfg                                         |    2 +-
 drivers/gpio/mxc_gpio.c                            |    4 +-
 drivers/video/mxc_ipuv3_fb.c                       |    5 +-
 include/configs/apx4devkit.h                       |  120 +--
 include/configs/m28evk.h                           |  192 +----
 include/configs/mx23_olinuxino.h                   |  142 +---
 include/configs/mx23evk.h                          |  115 +--
 include/configs/mx28evk.h                          |  173 +---
 include/configs/mx6qsabrelite.h                    |  284 -------
 include/configs/mx6sabre_common.h                  |    3 +-
 include/configs/mx6sabresd.h                       |   19 +
 include/configs/mxs.h                              |  191 +++++
 include/configs/nitrogen6x.h                       |   81 +-
 include/configs/sc_sps_1.h                         |  139 +---
 include/configs/wandboard.h                        |    2 +
 28 files changed, 601 insertions(+), 1966 deletions(-)
 rename board/{freescale/mx6qsabrelite/README =>
boundary/nitrogen6x/README.mx6qsabrelite} (100%)
 delete mode 100644 board/freescale/mx6qsabrelite/Makefile
 delete mode 100644 board/freescale/mx6qsabrelite/mx6qsabrelite.c
 delete mode 100644 include/configs/mx6qsabrelite.h
 create mode 100644 include/configs/mxs.h


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-07-12  9:48 Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2013-07-12  9:48 UTC (permalink / raw)
  To: u-boot

Hi Alber,

please pull these fixes from u-boot-imx, thanks.

The following changes since commit d6c6d127c5b948ec381fad5b24a2bc5497720644:

  vf610twr: Remove SoC name from U-Boot prompt (2013-06-28 16:59:08 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to ab94cd491faf3e7b0a3b934f5817b15997bcb315:

  net: fec: Avoid MX28 bus sync issue (2013-07-12 09:29:32 +0200)

----------------------------------------------------------------
Marek Vasut (3):
      m28evk: add trimffs to nand command
      net: fec: Remove bogus flush_dcache_range() call
      net: fec: Avoid MX28 bus sync issue

 drivers/net/fec_mxc.c    |   23 ++++++++++++++++++++++-
 include/configs/m28evk.h |    1 +
 2 files changed, 23 insertions(+), 1 deletion(-)

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-06-28 15:05 Stefano Babic
@ 2013-06-28 20:38 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2013-06-28 20:38 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Fri, 28 Jun 2013 17:05:29 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> some fixes and pending patches. Please pull from u-boot-imx, thanks !
> 
> The following changes since commit 4a1c7b13ae104d4526d3176793b7f6b06694df15:
> 
>   vf610twr: Drop unneeded 'status' variable (2013-06-06 17:52:08 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to d6c6d127c5b948ec381fad5b24a2bc5497720644:
> 
>   vf610twr: Remove SoC name from U-Boot prompt (2013-06-28 16:59:08 +0200)
> 
> ----------------------------------------------------------------
> Dirk Behme (2):
>       spi: mxc_spi: Fix pre and post divider calculation
>       spi: mxc_spi: Update pre and post divider algorithm
> 
> Eric Nelson (1):
>       dwc_ahsata: Allow use with dcache enabled
> 
> Fabio Estevam (8):
>       README: mx28_common: Keep the text within 80 columns
>       README: mx28_common: Do not hardcode the SSP port
>       README: mx28_common: Fix structure of sentence
>       README: mxs: Introduce README.mxs
>       mx28evk: Move README file inside board directory
>       m28evk: Move README file inside board directory
>       MAINTAINERS: Add an entry to the mx6q wandboard variant
>       video: mxsfb: Break the line in videomode message
> 
> Otavio Salvador (2):
>       vf610twr: Add default environment in line with other Freescale boards
>       vf610twr: Remove SoC name from U-Boot prompt
> 
> Pierre Aubert (3):
>       imx6: fix GPR2 wrong definition
>       imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
>       imx: Add support for the SabreSD shipped with i.MX6DL
> 
> Robert Winkler (4):
>       imx: nitrogen6x: Enabled data cache
>       imx: nitrogen6x: Enable bootz
>       imx: nitrogen6x: Enable raw initrd
>       imx: nitrogen6x: Enable filesystem generic commands
> 
> Tapani Utriainen (1):
>       Add support for Wandboard Quad
> 
> trem (2):
>       mx27: add function enable_caches
>       mx27: add i2c clock
> 
>  MAINTAINERS                                        |    4 +-
>  arch/arm/cpu/arm926ejs/mx27/generic.c              |   10 +
>  arch/arm/include/asm/arch-mx27/clock.h             |    1 +
>  arch/arm/include/asm/arch-mx6/imx-regs.h           |    2 +-
>  arch/arm/include/asm/arch-mx6/mx6dl_pins.h         | 1591
> +++++++++++++++++++-
>  doc/README.m28 => board/denx/m28evk/README         |    4 +-
>  .../freescale/mx28evk/README                       |    3 +-
>  .../freescale/{mx6qsabresd => mx6sabresd}/Makefile |    2 +-
>  .../mx6qsabresd.c => mx6sabresd/mx6sabresd.c}      |    7 +-
>  board/wandboard/README                             |    5 +
>  board/wandboard/wandboard.c                        |    2 +-
>  boards.cfg                                         |    6 +-
>  doc/README.mx28_common                             |   75 +-
>  drivers/block/dwc_ahsata.c                         |   34 +-
>  drivers/spi/mxc_spi.c                              |   28 +-
>  drivers/video/mxsfb.c                              |    2 +-
>  include/configs/mx6qsabreauto.h                    |    2 +-
>  .../{mx6qsabre_common.h => mx6sabre_common.h}      |    1 -
>  include/configs/{mx6qsabresd.h => mx6sabresd.h}    |    2 +-
>  include/configs/nitrogen6x.h                       |    6 +-
>  include/configs/vf610twr.h                         |   93 +-
>  include/configs/wandboard.h                        |    2 +
>  22 files changed, 1776 insertions(+), 106 deletions(-)
>  rename doc/README.m28 => board/denx/m28evk/README (75%)
>  rename doc/README.mx28evk => board/freescale/mx28evk/README (93%)
>  rename board/freescale/{mx6qsabresd => mx6sabresd}/Makefile (98%)
>  rename board/freescale/{mx6qsabresd/mx6qsabresd.c =>
> mx6sabresd/mx6sabresd.c} (98%)
>  rename include/configs/{mx6qsabre_common.h => mx6sabre_common.h} (99%)
>  rename include/configs/{mx6qsabresd.h => mx6sabresd.h} (97%)
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-06-28 15:05 Stefano Babic
  2013-06-28 20:38 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2013-06-28 15:05 UTC (permalink / raw)
  To: u-boot

Hi Albert,

some fixes and pending patches. Please pull from u-boot-imx, thanks !

The following changes since commit 4a1c7b13ae104d4526d3176793b7f6b06694df15:

  vf610twr: Drop unneeded 'status' variable (2013-06-06 17:52:08 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to d6c6d127c5b948ec381fad5b24a2bc5497720644:

  vf610twr: Remove SoC name from U-Boot prompt (2013-06-28 16:59:08 +0200)

----------------------------------------------------------------
Dirk Behme (2):
      spi: mxc_spi: Fix pre and post divider calculation
      spi: mxc_spi: Update pre and post divider algorithm

Eric Nelson (1):
      dwc_ahsata: Allow use with dcache enabled

Fabio Estevam (8):
      README: mx28_common: Keep the text within 80 columns
      README: mx28_common: Do not hardcode the SSP port
      README: mx28_common: Fix structure of sentence
      README: mxs: Introduce README.mxs
      mx28evk: Move README file inside board directory
      m28evk: Move README file inside board directory
      MAINTAINERS: Add an entry to the mx6q wandboard variant
      video: mxsfb: Break the line in videomode message

Otavio Salvador (2):
      vf610twr: Add default environment in line with other Freescale boards
      vf610twr: Remove SoC name from U-Boot prompt

Pierre Aubert (3):
      imx6: fix GPR2 wrong definition
      imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
      imx: Add support for the SabreSD shipped with i.MX6DL

Robert Winkler (4):
      imx: nitrogen6x: Enabled data cache
      imx: nitrogen6x: Enable bootz
      imx: nitrogen6x: Enable raw initrd
      imx: nitrogen6x: Enable filesystem generic commands

Tapani Utriainen (1):
      Add support for Wandboard Quad

trem (2):
      mx27: add function enable_caches
      mx27: add i2c clock

 MAINTAINERS                                        |    4 +-
 arch/arm/cpu/arm926ejs/mx27/generic.c              |   10 +
 arch/arm/include/asm/arch-mx27/clock.h             |    1 +
 arch/arm/include/asm/arch-mx6/imx-regs.h           |    2 +-
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h         | 1591
+++++++++++++++++++-
 doc/README.m28 => board/denx/m28evk/README         |    4 +-
 .../freescale/mx28evk/README                       |    3 +-
 .../freescale/{mx6qsabresd => mx6sabresd}/Makefile |    2 +-
 .../mx6qsabresd.c => mx6sabresd/mx6sabresd.c}      |    7 +-
 board/wandboard/README                             |    5 +
 board/wandboard/wandboard.c                        |    2 +-
 boards.cfg                                         |    6 +-
 doc/README.mx28_common                             |   75 +-
 drivers/block/dwc_ahsata.c                         |   34 +-
 drivers/spi/mxc_spi.c                              |   28 +-
 drivers/video/mxsfb.c                              |    2 +-
 include/configs/mx6qsabreauto.h                    |    2 +-
 .../{mx6qsabre_common.h => mx6sabre_common.h}      |    1 -
 include/configs/{mx6qsabresd.h => mx6sabresd.h}    |    2 +-
 include/configs/nitrogen6x.h                       |    6 +-
 include/configs/vf610twr.h                         |   93 +-
 include/configs/wandboard.h                        |    2 +
 22 files changed, 1776 insertions(+), 106 deletions(-)
 rename doc/README.m28 => board/denx/m28evk/README (75%)
 rename doc/README.mx28evk => board/freescale/mx28evk/README (93%)
 rename board/freescale/{mx6qsabresd => mx6sabresd}/Makefile (98%)
 rename board/freescale/{mx6qsabresd/mx6qsabresd.c =>
mx6sabresd/mx6sabresd.c} (98%)
 rename include/configs/{mx6qsabre_common.h => mx6sabre_common.h} (99%)
 rename include/configs/{mx6qsabresd.h => mx6sabresd.h} (97%)

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-06-06 15:55 Stefano Babic
@ 2013-06-08 13:27 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2013-06-08 13:27 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Thu, 06 Jun 2013 17:55:33 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks.
> 
> The following changes since commit cac423a730d3506154744485af1bbc1cd3a1e6a8:
> 
>   Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2013-05-11
> 22:24:28 +0200)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 4a1c7b13ae104d4526d3176793b7f6b06694df15:
> 
>   vf610twr: Drop unneeded 'status' variable (2013-06-06 17:52:08 +0200)
> 
> ----------------------------------------------------------------
> Alison Wang (7):
>       arm: vf610: Add IOMUX support for Vybrid VF610
>       arm: vf610: Add Vybrid VF610 CPU support
>       net: fec_mxc: Add support for Vybrid VF610
>       arm: vf610: Add watchdog support for Vybrid VF610
>       arm: vf610: Add uart support for Vybrid VF610
>       arm: vf610: Add Vybrid VF610 to mxc_ocotp document
>       arm: vf610: Add basic support for Vybrid VF610TWR board
> 
> Andrew Gabbasov (1):
>       mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS
> signal
> 
> Beno?t Th?baudeau (1):
>       imx: spl: Merge libimx-common make rules
> 
> Fabio Estevam (7):
>       mx28evk: Add splash screen support
>       mx23evk: Add splash screen support
>       video: mxsfb: Add an entry for mx23evk/mx28vk video modes
>       mx6slevk: Allow booting a device tree kernel
>       wandboard: Enable HDMI splashscreen
>       ARM: imx: Fix incorrect usage of CONFIG_SYS_MMC_ENV_PART
>       vf610twr: Drop unneeded 'status' variable
> 
> Luka Perkov (1):
>       wandboard: fix typo in README
> 
> Marek Vasut (1):
>       arm: mxs: Fix vectoring table crafting
> 
> Otavio Salvador (2):
>       build: Use generic boot logo matching
>       wandboard: Add Boot Splash image with Wandboard logo
> 
> Renato Frias (2):
>       mx6qsabreauto: Add i2c to mx6qsabreauto board
>       mx6qsabreauto: Add Port Expander reset
> 
> SARTRE Leo (1):
>       Add support for Congatec Conga-QEVAl board
> 
>  MAINTAINERS                                   |    8 +
>  Makefile                                      |    2 +-
>  arch/arm/cpu/arm926ejs/mxs/mxs.c              |   25 +-
>  arch/arm/cpu/armv7/vf610/Makefile             |   42 +++
>  arch/arm/cpu/armv7/vf610/generic.c            |  324 +++++++++++++++++++
>  arch/arm/cpu/armv7/vf610/timer.c              |  103 ++++++
>  arch/arm/imx-common/Makefile                  |    2 +-
>  arch/arm/imx-common/iomux-v3.c                |    6 +
>  arch/arm/include/asm/arch-vf610/clock.h       |   39 +++
>  arch/arm/include/asm/arch-vf610/crm_regs.h    |  225 +++++++++++++
>  arch/arm/include/asm/arch-vf610/imx-regs.h    |  419
> +++++++++++++++++++++++++
>  arch/arm/include/asm/arch-vf610/iomux-vf610.h |  101 ++++++
>  arch/arm/include/asm/imx-common/iomux-v3.h    |   18 ++
>  board/boundary/nitrogen6x/nitrogen6x.c        |    1 -
>  board/congatec/cgtqmx6eval/Makefile           |   42 +++
>  board/congatec/cgtqmx6eval/README             |   29 ++
>  board/congatec/cgtqmx6eval/cgtqmx6eval.c      |  167 ++++++++++
>  board/freescale/mx23evk/mx23evk.c             |    6 +
>  board/freescale/mx23evk/spl_boot.c            |   32 ++
>  board/freescale/mx28evk/iomux.c               |   33 ++
>  board/freescale/mx28evk/mx28evk.c             |    6 +
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c |   57 ++++
>  board/freescale/mx6qsabrelite/mx6qsabrelite.c |    1 -
>  board/freescale/vf610twr/Makefile             |   39 +++
>  board/freescale/vf610twr/imximage.cfg         |   33 ++
>  board/freescale/vf610twr/vf610twr.c           |  407
> ++++++++++++++++++++++++
>  board/wandboard/README                        |    4 +-
>  board/wandboard/wandboard.c                   |   98 ++++++
>  boards.cfg                                    |    2 +
>  doc/README.mxc_ocotp                          |    1 +
>  doc/README.vf610                              |   10 +
>  drivers/net/fec_mxc.c                         |    4 +-
>  drivers/serial/Makefile                       |    1 +
>  drivers/serial/serial_lpuart.c                |  132 ++++++++
>  drivers/video/mxsfb.c                         |    5 +
>  drivers/watchdog/Makefile                     |    2 +-
>  include/configs/cgtqmx6eval.h                 |  194 ++++++++++++
>  include/configs/mx23evk.h                     |   17 +
>  include/configs/mx28evk.h                     |   17 +
>  include/configs/mx53ard.h                     |    3 +-
>  include/configs/mx6qsabre_common.h            |    2 +-
>  include/configs/mx6qsabreauto.h               |    7 +-
>  include/configs/mx6qsabresd.h                 |    1 -
>  include/configs/mx6slevk.h                    |    2 +-
>  include/configs/vf610twr.h                    |  140 +++++++++
>  include/configs/wandboard.h                   |   20 +-
>  spl/Makefile                                  |    6 +-
>  tools/Makefile                                |   27 +-
>  tools/logos/wandboard.bmp                     |  Bin 0 -> 22390 bytes
>  49 files changed, 2818 insertions(+), 44 deletions(-)
>  create mode 100644 arch/arm/cpu/armv7/vf610/Makefile
>  create mode 100644 arch/arm/cpu/armv7/vf610/generic.c
>  create mode 100644 arch/arm/cpu/armv7/vf610/timer.c
>  create mode 100644 arch/arm/include/asm/arch-vf610/clock.h
>  create mode 100644 arch/arm/include/asm/arch-vf610/crm_regs.h
>  create mode 100644 arch/arm/include/asm/arch-vf610/imx-regs.h
>  create mode 100644 arch/arm/include/asm/arch-vf610/iomux-vf610.h
>  create mode 100644 board/congatec/cgtqmx6eval/Makefile
>  create mode 100644 board/congatec/cgtqmx6eval/README
>  create mode 100644 board/congatec/cgtqmx6eval/cgtqmx6eval.c
>  create mode 100644 board/freescale/vf610twr/Makefile
>  create mode 100644 board/freescale/vf610twr/imximage.cfg
>  create mode 100644 board/freescale/vf610twr/vf610twr.c
>  create mode 100644 doc/README.vf610
>  create mode 100644 drivers/serial/serial_lpuart.c
>  create mode 100644 include/configs/cgtqmx6eval.h
>  create mode 100644 include/configs/vf610twr.h
>  create mode 100644 tools/logos/wandboard.bmp
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-06-06 15:55 Stefano Babic
  2013-06-08 13:27 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2013-06-06 15:55 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit cac423a730d3506154744485af1bbc1cd3a1e6a8:

  Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2013-05-11
22:24:28 +0200)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 4a1c7b13ae104d4526d3176793b7f6b06694df15:

  vf610twr: Drop unneeded 'status' variable (2013-06-06 17:52:08 +0200)

----------------------------------------------------------------
Alison Wang (7):
      arm: vf610: Add IOMUX support for Vybrid VF610
      arm: vf610: Add Vybrid VF610 CPU support
      net: fec_mxc: Add support for Vybrid VF610
      arm: vf610: Add watchdog support for Vybrid VF610
      arm: vf610: Add uart support for Vybrid VF610
      arm: vf610: Add Vybrid VF610 to mxc_ocotp document
      arm: vf610: Add basic support for Vybrid VF610TWR board

Andrew Gabbasov (1):
      mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS
signal

Beno?t Th?baudeau (1):
      imx: spl: Merge libimx-common make rules

Fabio Estevam (7):
      mx28evk: Add splash screen support
      mx23evk: Add splash screen support
      video: mxsfb: Add an entry for mx23evk/mx28vk video modes
      mx6slevk: Allow booting a device tree kernel
      wandboard: Enable HDMI splashscreen
      ARM: imx: Fix incorrect usage of CONFIG_SYS_MMC_ENV_PART
      vf610twr: Drop unneeded 'status' variable

Luka Perkov (1):
      wandboard: fix typo in README

Marek Vasut (1):
      arm: mxs: Fix vectoring table crafting

Otavio Salvador (2):
      build: Use generic boot logo matching
      wandboard: Add Boot Splash image with Wandboard logo

Renato Frias (2):
      mx6qsabreauto: Add i2c to mx6qsabreauto board
      mx6qsabreauto: Add Port Expander reset

SARTRE Leo (1):
      Add support for Congatec Conga-QEVAl board

 MAINTAINERS                                   |    8 +
 Makefile                                      |    2 +-
 arch/arm/cpu/arm926ejs/mxs/mxs.c              |   25 +-
 arch/arm/cpu/armv7/vf610/Makefile             |   42 +++
 arch/arm/cpu/armv7/vf610/generic.c            |  324 +++++++++++++++++++
 arch/arm/cpu/armv7/vf610/timer.c              |  103 ++++++
 arch/arm/imx-common/Makefile                  |    2 +-
 arch/arm/imx-common/iomux-v3.c                |    6 +
 arch/arm/include/asm/arch-vf610/clock.h       |   39 +++
 arch/arm/include/asm/arch-vf610/crm_regs.h    |  225 +++++++++++++
 arch/arm/include/asm/arch-vf610/imx-regs.h    |  419
+++++++++++++++++++++++++
 arch/arm/include/asm/arch-vf610/iomux-vf610.h |  101 ++++++
 arch/arm/include/asm/imx-common/iomux-v3.h    |   18 ++
 board/boundary/nitrogen6x/nitrogen6x.c        |    1 -
 board/congatec/cgtqmx6eval/Makefile           |   42 +++
 board/congatec/cgtqmx6eval/README             |   29 ++
 board/congatec/cgtqmx6eval/cgtqmx6eval.c      |  167 ++++++++++
 board/freescale/mx23evk/mx23evk.c             |    6 +
 board/freescale/mx23evk/spl_boot.c            |   32 ++
 board/freescale/mx28evk/iomux.c               |   33 ++
 board/freescale/mx28evk/mx28evk.c             |    6 +
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |   57 ++++
 board/freescale/mx6qsabrelite/mx6qsabrelite.c |    1 -
 board/freescale/vf610twr/Makefile             |   39 +++
 board/freescale/vf610twr/imximage.cfg         |   33 ++
 board/freescale/vf610twr/vf610twr.c           |  407
++++++++++++++++++++++++
 board/wandboard/README                        |    4 +-
 board/wandboard/wandboard.c                   |   98 ++++++
 boards.cfg                                    |    2 +
 doc/README.mxc_ocotp                          |    1 +
 doc/README.vf610                              |   10 +
 drivers/net/fec_mxc.c                         |    4 +-
 drivers/serial/Makefile                       |    1 +
 drivers/serial/serial_lpuart.c                |  132 ++++++++
 drivers/video/mxsfb.c                         |    5 +
 drivers/watchdog/Makefile                     |    2 +-
 include/configs/cgtqmx6eval.h                 |  194 ++++++++++++
 include/configs/mx23evk.h                     |   17 +
 include/configs/mx28evk.h                     |   17 +
 include/configs/mx53ard.h                     |    3 +-
 include/configs/mx6qsabre_common.h            |    2 +-
 include/configs/mx6qsabreauto.h               |    7 +-
 include/configs/mx6qsabresd.h                 |    1 -
 include/configs/mx6slevk.h                    |    2 +-
 include/configs/vf610twr.h                    |  140 +++++++++
 include/configs/wandboard.h                   |   20 +-
 spl/Makefile                                  |    6 +-
 tools/Makefile                                |   27 +-
 tools/logos/wandboard.bmp                     |  Bin 0 -> 22390 bytes
 49 files changed, 2818 insertions(+), 44 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/vf610/Makefile
 create mode 100644 arch/arm/cpu/armv7/vf610/generic.c
 create mode 100644 arch/arm/cpu/armv7/vf610/timer.c
 create mode 100644 arch/arm/include/asm/arch-vf610/clock.h
 create mode 100644 arch/arm/include/asm/arch-vf610/crm_regs.h
 create mode 100644 arch/arm/include/asm/arch-vf610/imx-regs.h
 create mode 100644 arch/arm/include/asm/arch-vf610/iomux-vf610.h
 create mode 100644 board/congatec/cgtqmx6eval/Makefile
 create mode 100644 board/congatec/cgtqmx6eval/README
 create mode 100644 board/congatec/cgtqmx6eval/cgtqmx6eval.c
 create mode 100644 board/freescale/vf610twr/Makefile
 create mode 100644 board/freescale/vf610twr/imximage.cfg
 create mode 100644 board/freescale/vf610twr/vf610twr.c
 create mode 100644 doc/README.vf610
 create mode 100644 drivers/serial/serial_lpuart.c
 create mode 100644 include/configs/cgtqmx6eval.h
 create mode 100644 include/configs/vf610twr.h
 create mode 100644 tools/logos/wandboard.bmp


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-05-07  7:55 Stefano Babic
@ 2013-05-11  7:30 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2013-05-11  7:30 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Tue, 07 May 2013 09:55:08 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit f2e8a87305a55652488af140adcf65b1e688f287:
> 
>   exynos: fdt: Add TMU node for snow (2013-04-17 10:00:44 +0900)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to d782c1fe7246301143ed78c0d86ea6c81f9325f9:
> 
>   arm: mxs: video: Enable MXS LCDIF on M28EVK (2013-05-06 17:40:23 +0200)
> 
> ----------------------------------------------------------------
> Beno?t Th?baudeau (40):
>       imx: Homogenize and fix fuse register definitions
>       imx: Add useful fuse definitions
>       Add fuse API and commands
>       Add fsl_iim driver
>       mpc: iim: Switch to common fsl_iim
>       mx51evk: Enable support for iim
>       Add mxc_ocotp driver
>       mx6qsabrelite: Enable support for ocotp
>       nitrogen6x: Enable support for ocotp
>       imx: Document fuse assignments for MAC addresses
>       imx: iomux-v3: Fix common pad control definitions
>       imx: iomux-v3: cosmetic: Reorganize definitions
>       imx: iomux-v3: Restore Linux's NEW_PAD_CTRL() macro
>       imx: iomux-v3: Include PKE and PUE to pad control pull definitions
>       imx: iomux-v3: Add iomux-mx25.h
>       imx: mx25pdk: Convert to iomux-v3
>       imx: mx25pdk: Fix GPIO assignments
>       imx: tx25: Convert to iomux-v3
>       imx: zmx25: Convert to iomux-v3
>       imx: mx25: Remove legacy iomux support
>       imx: iomux-v3: Add iomux-mx35.h
>       imx: flea3: Convert to iomux-v3
>       imx: mx35pdk: Fix WDOG_RST iomux function
>       imx: mx35pdk: Convert to iomux-v3
>       imx: woodburn: Convert to iomux-v3
>       imx: mx35: Remove legacy iomux support
>       imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27
>       imx: iomux-v3: Add missing definitions to iomux-mx51.h
>       imx: mx51evk: Convert to iomux-v3
>       imx: mx51_efikamx/sb: Convert to iomux-v3
>       imx: vision2: Convert to iomux-v3
>       imx: iomux-v3: Add iomux-mx53.h
>       imx: ima3-mx53: Convert to iomux-v3
>       imx: mx53ard: Convert to iomux-v3
>       imx: mx53evk: Convert to iomux-v3
>       imx: mx53loco: Convert to iomux-v3
>       imx: mx53smd: Convert to iomux-v3
>       imx: m53evk: Convert to iomux-v3
>       imx: mx5: Remove legacy iomux support
>       imx: mx35pdk: Fix MUX2_CTR GPIO
> 
> Eric Benard (1):
>       mx28evk: add trimffs to nand command
> 
> Fabio Estevam (22):
>       iomux-v3: Place pad control definitions into common file
>       mx6: Add solo-lite variant support
>       mx6sl: Add initial support for mx6slevk board
>       imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
>       nitrogen6x: Setup CCM_CCOSR register
>       mx51evk: Update environment in order to allow booting a dt kernel
>       mx51evk: Do not force the rootfs type
>       mx5: Define a common get_board_rev()
>       mx5: Select CONFIG_REVISION_TAG
>       mx53ard: Move register masks into imx-regs.h
>       mx23: Put back RAM voltage level to its original value
>       mx23: Fix pad voltage selection bit
>       mx23evk: Fix DDR pin iomux settings
>       mx23_olinuxino: Fix DDR pin iomux settings
>       mxs: spl_mem_init: Fix comment about start bit
>       mxs: spl_mem_init: Remove erroneous DDR setting
>       mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
>       mxs: spl_mem_init: Change EMI port priority
>       mx23: Operate DDR voltage supply at 2.5V
>       mx23evk: Do not set voltage selection bit for SSP pads
>       mx23_olinuxino: Do not set voltage selection bit for SSP pads
>       mxs: Explain why some mx23 DDR registers are not configured
> 
> Marek Vasut (13):
>       tools: arm: imx: Implement BOOT_OFFSET command for imximage
>       imx: Align the imximage header and payload to multiples of 4k
>       nand: Add SPL_NAND support to mxc_nand_spl
>       arm: imx: Pack u-boot.bin into uImage for SPL
>       arm: mx5: Add SPL support code to MX5
>       arm: mx5: Add NAND clock handling
>       arm: mx5: Add support for DENX M53EVK
>       arm: mx23: Fix VDDMEM misconfiguration
>       arm: mxs: Preprocess u-boot.bd so they contain full path
>       arm: mxs: Add LCDIF clock configuration function
>       arm: mxs: Add LCDIF registers for i.MX233
>       arm: mxs: Add MXS LCDIF driver
>       arm: mxs: video: Enable MXS LCDIF on M28EVK
> 
> Otavio Salvador (9):
>       mx6qsabre{sd, auto}: Add update_sd_firmware support
>       mx6qsabresd: Return status when initializing MMC
>       wandboard: Use env storage info for mmcdev/mmcpart
>       wandboard: Add update_sd_firmware support
>       wandboard: Add card detection for SOM MicroSD card
>       wandboard: Add support for Carrier Board MicroSD card
>       wandboard: Add boot selection support
>       mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
>       mx53ard: Rework default environment to support FDT, MMC and netboot
> 
> Philip Paeps (2):
>       mx35 iomux: correct offsets of IOMUX registers
>       mx35 iomux: correct input select register index
> 
> Shawn Guo (1):
>       ARM: mx6: define CONFIG_ARM_ERRATA_742230
> 
> Stefan Roese (7):
>       arm: imx: Change iomux functions to void type
>       imx: Move some header files from arch-mxs to imx-common
>       imx: Move some i.MX common functions into the imx-common directory
>       dma: Add i.MX6 support to drivers/dma/apbh_dma.c
>       mtd: mxs_nand: Add support for i.MX6
>       imx: Add titanium board support (i.MX6 based)
>       arm: imx: Codingstyle enhancement of include/asm/arch-mx6/crm_regs.h
> 
> Stefano Babic (1):
>       Merge branch 'next'
> 
>  .gitignore                                         |    1 +
>  MAINTAINERS                                        |    4 +
>  Makefile                                           |    9 +-
>  README                                             |    1 +
>  arch/arm/cpu/arm1136/mx35/Makefile                 |    1 -
>  arch/arm/cpu/arm1136/mx35/iomux.c                  |  114 --
>  arch/arm/cpu/arm926ejs/mx25/generic.c              |  117 --
>  arch/arm/cpu/arm926ejs/mxs/Makefile                |   10 +
>  arch/arm/cpu/arm926ejs/mxs/clock.c                 |   93 ++
>  arch/arm/cpu/arm926ejs/mxs/mxs.c                   |   65 +-
>  arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c          |   46 +-
>  arch/arm/cpu/arm926ejs/mxs/spl_power_init.c        |   50 +-
>  arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd         |    4 +-
>  arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd         |    4 +-
>  arch/arm/cpu/armv7/mx5/Makefile                    |    2 +-
>  arch/arm/cpu/armv7/mx5/clock.c                     |   14 +-
>  arch/arm/cpu/armv7/mx5/iomux.c                     |  186 ---
>  arch/arm/cpu/armv7/mx5/soc.c                       |    7 +
>  arch/arm/cpu/armv7/mx6/clock.c                     |   52 +-
>  arch/arm/cpu/armv7/mx6/soc.c                       |   11 +-
>  arch/arm/imx-common/Makefile                       |   22 +-
>  arch/arm/imx-common/iomux-v3.c                     |   18 +-
>  arch/arm/imx-common/misc.c                         |   84 ++
>  arch/arm/include/asm/arch-mx25/imx-regs.h          |   21 +-
>  arch/arm/include/asm/arch-mx25/imx25-pinmux.h      |  421 -------
>  arch/arm/include/asm/arch-mx25/iomux-mx25.h        |  545 +++++++++
>  arch/arm/include/asm/arch-mx27/imx-regs.h          |    3 +-
>  arch/arm/include/asm/arch-mx31/imx-regs.h          |   22 +-
>  arch/arm/include/asm/arch-mx35/imx-regs.h          |   19 +-
>  arch/arm/include/asm/arch-mx35/iomux-mx35.h        | 1276
> ++++++++++++++++++++
>  arch/arm/include/asm/arch-mx35/iomux.h             |  295 -----
>  arch/arm/include/asm/arch-mx35/mx35_pins.h         |  353 ------
>  arch/arm/include/asm/arch-mx5/clock.h              |    1 +
>  arch/arm/include/asm/arch-mx5/imx-regs.h           |   24 +-
>  arch/arm/include/asm/arch-mx5/iomux-mx51.h         |  180 ++-
>  arch/arm/include/asm/arch-mx5/iomux-mx53.h         | 1232
> +++++++++++++++++++
>  arch/arm/include/asm/arch-mx5/iomux.h              |   91 --
>  arch/arm/include/asm/arch-mx5/mx5x_pins.h          |  879 --------------
>  arch/arm/include/asm/arch-mx5/spl.h                |   19 +
>  arch/arm/include/asm/arch-mx6/clock.h              |    1 +
>  arch/arm/include/asm/arch-mx6/crm_regs.h           |  183 +--
>  arch/arm/include/asm/arch-mx6/imx-regs.h           |   96 +-
>  arch/arm/include/asm/arch-mx6/mx6-pins.h           |    4 +
>  arch/arm/include/asm/arch-mx6/mx6dl_pins.h         |   35 +-
>  arch/arm/include/asm/arch-mx6/mx6q_pins.h          |   27 -
>  arch/arm/include/asm/arch-mx6/mx6sl_pins.h         |   25 +
>  arch/arm/include/asm/arch-mx6/sys_proto.h          |   10 +
>  arch/arm/include/asm/arch-mxs/clock.h              |    1 +
>  arch/arm/include/asm/arch-mxs/imx-regs.h           |    6 +-
>  arch/arm/include/asm/arch-mxs/iomux.h              |    4 +
>  arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h  |    2 +-
>  arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h  |    2 +-
>  arch/arm/include/asm/arch-mxs/regs-digctl.h        |    2 +-
>  arch/arm/include/asm/arch-mxs/regs-i2c.h           |    2 +-
>  arch/arm/include/asm/arch-mxs/regs-lcdif.h         |   38 +-
>  arch/arm/include/asm/arch-mxs/regs-lradc.h         |    2 +-
>  arch/arm/include/asm/arch-mxs/regs-ocotp.h         |    2 +-
>  arch/arm/include/asm/arch-mxs/regs-pinctrl.h       |    2 +-
>  arch/arm/include/asm/arch-mxs/regs-power-mx23.h    |    2 +-
>  arch/arm/include/asm/arch-mxs/regs-power-mx28.h    |    2 +-
>  arch/arm/include/asm/arch-mxs/regs-rtc.h           |    2 +-
>  arch/arm/include/asm/arch-mxs/regs-ssp.h           |    2 +-
>  arch/arm/include/asm/arch-mxs/regs-timrot.h        |    2 +-
>  .../arm/include/asm/{arch-mxs => imx-common}/dma.h |   12 +
>  arch/arm/include/asm/imx-common/imximage.cfg       |   30 +
>  arch/arm/include/asm/imx-common/iomux-v3.h         |   69 +-
>  .../asm/{arch-mxs => imx-common}/regs-apbh.h       |   19 +-
>  .../asm/{arch-mxs => imx-common}/regs-bch.h        |   12 +-
>  .../asm/{arch-mxs => imx-common}/regs-common.h     |    0
>  .../asm/{arch-mxs => imx-common}/regs-gpmi.h       |    2 +-
>  arch/powerpc/cpu/mpc512x/Makefile                  |    1 -
>  arch/powerpc/cpu/mpc512x/cpu_init.c                |    2 +-
>  arch/powerpc/cpu/mpc512x/iim.c                     |  394 ------
>  arch/powerpc/include/asm/immap_512x.h              |    2 +
>  board/CarMediaLab/flea3/flea3.c                    |   91 +-
>  board/boundary/nitrogen6x/clocks.cfg               |   11 +
>  board/boundary/nitrogen6x/nitrogen6x.c             |   42 +-
>  board/denx/m53evk/Makefile                         |   40 +
>  board/denx/m53evk/imximage.cfg                     |  108 ++
>  board/denx/m53evk/m53evk.c                         |  328 +++++
>  board/esg/ima3-mx53/ima3-mx53.c                    |  228 ++--
>  board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg       |   11 +
>  board/freescale/mx23evk/spl_boot.c                 |    4 +-
>  board/freescale/mx25pdk/mx25pdk.c                  |  132 +-
>  board/freescale/mx35pdk/mx35pdk.c                  |  175 ++-
>  board/freescale/mx51evk/mx51evk.c                  |  348 ++----
>  board/freescale/mx51evk/mx51evk_video.c            |   22 +-
>  board/freescale/mx53ard/mx53ard.c                  |  329 +++--
>  board/freescale/mx53evk/mx53evk.c                  |  289 ++---
>  board/freescale/mx53loco/mx53loco.c                |  268 ++--
>  board/freescale/mx53loco/mx53loco_video.c          |   68 +-
>  board/freescale/mx53smd/mx53smd.c                  |  152 +--
>  board/freescale/mx6qarm2/mx6qarm2.c                |   17 +-
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c      |   22 +-
>  board/freescale/mx6qsabrelite/mx6qsabrelite.c      |   30 +-
>  board/freescale/mx6qsabresd/mx6qsabresd.c          |   30 +-
>  board/freescale/mx6slevk/Makefile                  |   28 +
>  board/freescale/mx6slevk/imximage.cfg              |  118 ++
>  board/freescale/mx6slevk/mx6slevk.c                |  102 ++
>  board/freescale/titanium/Makefile                  |   36 +
>  board/freescale/titanium/imximage.cfg              |  178 +++
>  board/freescale/titanium/titanium.c                |  334 +++++
>  board/genesi/mx51_efikamx/efikamx-usb.c            |  122 +-
>  board/genesi/mx51_efikamx/efikamx.c                |    2 +-
>  board/karo/tx25/tx25.c                             |  107 +-
>  board/olimex/mx23_olinuxino/spl_boot.c             |    4 +-
>  board/syteco/zmx25/zmx25.c                         |  143 +--
>  board/ttcontrol/vision2/vision2.c                  |  585 ++++-----
>  board/wandboard/wandboard.c                        |  113 +-
>  board/woodburn/woodburn.c                          |   69 +-
>  boards.cfg                                         |    3 +
>  common/Makefile                                    |    1 +
>  common/cmd_fuse.c                                  |  168 +++
>  doc/README.fsl_iim                                 |   48 +
>  doc/README.fuse                                    |   67 +
>  doc/README.imx25                                   |   10 +
>  doc/README.imx27                                   |   10 +
>  doc/README.imx5                                    |    6 +
>  doc/README.imx6                                    |   10 +
>  doc/README.imximage                                |   18 +
>  doc/README.mxc_ocotp                               |   50 +
>  drivers/dma/apbh_dma.c                             |    5 +-
>  drivers/misc/Makefile                              |    2 +
>  drivers/misc/fsl_iim.c                             |  286 +++++
>  drivers/misc/mxc_ocotp.c                           |  216 ++++
>  drivers/mmc/mxsmmc.c                               |    2 +-
>  drivers/mtd/nand/mxc_nand_spl.c                    |   13 +-
>  drivers/mtd/nand/mxs_nand.c                        |   15 +-
>  drivers/spi/mxs_spi.c                              |    2 +-
>  drivers/usb/host/ehci-mx5.c                        |   73 --
>  drivers/video/Makefile                             |    1 +
>  drivers/video/cfb_console.c                        |    4 +
>  drivers/video/mxsfb.c                              |  189 +++
>  include/config_cmd_all.h                           |    1 +
>  include/configs/ac14xx.h                           |    5 +
>  include/configs/aria.h                             |    2 +-
>  include/configs/ima3-mx53.h                        |    3 -
>  include/configs/m28evk.h                           |   19 +
>  include/configs/m53evk.h                           |  256 ++++
>  include/configs/mecp5123.h                         |    2 +-
>  include/configs/mpc5121ads.h                       |    2 +-
>  include/configs/mx28evk.h                          |    1 +
>  include/configs/mx51evk.h                          |   51 +-
>  include/configs/mx53ard.h                          |  102 +-
>  include/configs/mx53evk.h                          |    1 +
>  include/configs/mx53smd.h                          |    1 +
>  include/configs/mx6_common.h                       |    1 +
>  include/configs/mx6qsabre_common.h                 |   14 +
>  include/configs/mx6qsabrelite.h                    |    5 +
>  include/configs/mx6slevk.h                         |  189 +++
>  include/configs/nitrogen6x.h                       |    5 +
>  include/configs/pdm360ng.h                         |    7 +
>  include/configs/titanium.h                         |  277 +++++
>  include/configs/wandboard.h                        |   24 +-
>  .../asm/arch-mx25/sys_proto.h => include/fuse.h    |   30 +-
>  include/usb/ehci-fsl.h                             |    6 -
>  spl/Makefile                                       |    8 +
>  tools/imximage.c                                   |   17 +-
>  tools/imximage.h                                   |    9 +-
>  tools/mxsboot.c                                    |    8 +-
>  160 files changed, 8884 insertions(+), 5340 deletions(-)
>  delete mode 100644 arch/arm/cpu/arm1136/mx35/iomux.c
>  delete mode 100644 arch/arm/cpu/armv7/mx5/iomux.c
>  create mode 100644 arch/arm/imx-common/misc.c
>  delete mode 100644 arch/arm/include/asm/arch-mx25/imx25-pinmux.h
>  create mode 100644 arch/arm/include/asm/arch-mx25/iomux-mx25.h
>  create mode 100644 arch/arm/include/asm/arch-mx35/iomux-mx35.h
>  delete mode 100644 arch/arm/include/asm/arch-mx35/iomux.h
>  delete mode 100644 arch/arm/include/asm/arch-mx35/mx35_pins.h
>  create mode 100644 arch/arm/include/asm/arch-mx5/iomux-mx53.h
>  delete mode 100644 arch/arm/include/asm/arch-mx5/iomux.h
>  delete mode 100644 arch/arm/include/asm/arch-mx5/mx5x_pins.h
>  create mode 100644 arch/arm/include/asm/arch-mx5/spl.h
>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6sl_pins.h
>  rename arch/arm/include/asm/{arch-mxs => imx-common}/dma.h (93%)
>  create mode 100644 arch/arm/include/asm/imx-common/imximage.cfg
>  rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-apbh.h (97%)
>  rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-bch.h (96%)
>  rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-common.h (100%)
>  rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-gpmi.h (99%)
>  delete mode 100644 arch/powerpc/cpu/mpc512x/iim.c
>  create mode 100644 board/denx/m53evk/Makefile
>  create mode 100644 board/denx/m53evk/imximage.cfg
>  create mode 100644 board/denx/m53evk/m53evk.c
>  create mode 100644 board/freescale/mx6slevk/Makefile
>  create mode 100644 board/freescale/mx6slevk/imximage.cfg
>  create mode 100644 board/freescale/mx6slevk/mx6slevk.c
>  create mode 100644 board/freescale/titanium/Makefile
>  create mode 100644 board/freescale/titanium/imximage.cfg
>  create mode 100644 board/freescale/titanium/titanium.c
>  create mode 100644 common/cmd_fuse.c
>  create mode 100644 doc/README.fsl_iim
>  create mode 100644 doc/README.fuse
>  create mode 100644 doc/README.imx25
>  create mode 100644 doc/README.imx27
>  create mode 100644 doc/README.imx6
>  create mode 100644 doc/README.mxc_ocotp
>  create mode 100644 drivers/misc/fsl_iim.c
>  create mode 100644 drivers/misc/mxc_ocotp.c
>  create mode 100644 drivers/video/mxsfb.c
>  create mode 100644 include/configs/m53evk.h
>  create mode 100644 include/configs/mx6slevk.h
>  create mode 100644 include/configs/titanium.h
>  rename arch/arm/include/asm/arch-mx25/sys_proto.h => include/fuse.h (55%)
> 
> Best regards,
> Stefano
> 

Applied to u-boot-arm/master (with two trivial merge resolutions),
thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-05-07  7:55 Stefano Babic
  2013-05-11  7:30 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2013-05-07  7:55 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !

The following changes since commit f2e8a87305a55652488af140adcf65b1e688f287:

  exynos: fdt: Add TMU node for snow (2013-04-17 10:00:44 +0900)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to d782c1fe7246301143ed78c0d86ea6c81f9325f9:

  arm: mxs: video: Enable MXS LCDIF on M28EVK (2013-05-06 17:40:23 +0200)

----------------------------------------------------------------
Beno?t Th?baudeau (40):
      imx: Homogenize and fix fuse register definitions
      imx: Add useful fuse definitions
      Add fuse API and commands
      Add fsl_iim driver
      mpc: iim: Switch to common fsl_iim
      mx51evk: Enable support for iim
      Add mxc_ocotp driver
      mx6qsabrelite: Enable support for ocotp
      nitrogen6x: Enable support for ocotp
      imx: Document fuse assignments for MAC addresses
      imx: iomux-v3: Fix common pad control definitions
      imx: iomux-v3: cosmetic: Reorganize definitions
      imx: iomux-v3: Restore Linux's NEW_PAD_CTRL() macro
      imx: iomux-v3: Include PKE and PUE to pad control pull definitions
      imx: iomux-v3: Add iomux-mx25.h
      imx: mx25pdk: Convert to iomux-v3
      imx: mx25pdk: Fix GPIO assignments
      imx: tx25: Convert to iomux-v3
      imx: zmx25: Convert to iomux-v3
      imx: mx25: Remove legacy iomux support
      imx: iomux-v3: Add iomux-mx35.h
      imx: flea3: Convert to iomux-v3
      imx: mx35pdk: Fix WDOG_RST iomux function
      imx: mx35pdk: Convert to iomux-v3
      imx: woodburn: Convert to iomux-v3
      imx: mx35: Remove legacy iomux support
      imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27
      imx: iomux-v3: Add missing definitions to iomux-mx51.h
      imx: mx51evk: Convert to iomux-v3
      imx: mx51_efikamx/sb: Convert to iomux-v3
      imx: vision2: Convert to iomux-v3
      imx: iomux-v3: Add iomux-mx53.h
      imx: ima3-mx53: Convert to iomux-v3
      imx: mx53ard: Convert to iomux-v3
      imx: mx53evk: Convert to iomux-v3
      imx: mx53loco: Convert to iomux-v3
      imx: mx53smd: Convert to iomux-v3
      imx: m53evk: Convert to iomux-v3
      imx: mx5: Remove legacy iomux support
      imx: mx35pdk: Fix MUX2_CTR GPIO

Eric Benard (1):
      mx28evk: add trimffs to nand command

Fabio Estevam (22):
      iomux-v3: Place pad control definitions into common file
      mx6: Add solo-lite variant support
      mx6sl: Add initial support for mx6slevk board
      imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
      nitrogen6x: Setup CCM_CCOSR register
      mx51evk: Update environment in order to allow booting a dt kernel
      mx51evk: Do not force the rootfs type
      mx5: Define a common get_board_rev()
      mx5: Select CONFIG_REVISION_TAG
      mx53ard: Move register masks into imx-regs.h
      mx23: Put back RAM voltage level to its original value
      mx23: Fix pad voltage selection bit
      mx23evk: Fix DDR pin iomux settings
      mx23_olinuxino: Fix DDR pin iomux settings
      mxs: spl_mem_init: Fix comment about start bit
      mxs: spl_mem_init: Remove erroneous DDR setting
      mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
      mxs: spl_mem_init: Change EMI port priority
      mx23: Operate DDR voltage supply at 2.5V
      mx23evk: Do not set voltage selection bit for SSP pads
      mx23_olinuxino: Do not set voltage selection bit for SSP pads
      mxs: Explain why some mx23 DDR registers are not configured

Marek Vasut (13):
      tools: arm: imx: Implement BOOT_OFFSET command for imximage
      imx: Align the imximage header and payload to multiples of 4k
      nand: Add SPL_NAND support to mxc_nand_spl
      arm: imx: Pack u-boot.bin into uImage for SPL
      arm: mx5: Add SPL support code to MX5
      arm: mx5: Add NAND clock handling
      arm: mx5: Add support for DENX M53EVK
      arm: mx23: Fix VDDMEM misconfiguration
      arm: mxs: Preprocess u-boot.bd so they contain full path
      arm: mxs: Add LCDIF clock configuration function
      arm: mxs: Add LCDIF registers for i.MX233
      arm: mxs: Add MXS LCDIF driver
      arm: mxs: video: Enable MXS LCDIF on M28EVK

Otavio Salvador (9):
      mx6qsabre{sd, auto}: Add update_sd_firmware support
      mx6qsabresd: Return status when initializing MMC
      wandboard: Use env storage info for mmcdev/mmcpart
      wandboard: Add update_sd_firmware support
      wandboard: Add card detection for SOM MicroSD card
      wandboard: Add support for Carrier Board MicroSD card
      wandboard: Add boot selection support
      mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
      mx53ard: Rework default environment to support FDT, MMC and netboot

Philip Paeps (2):
      mx35 iomux: correct offsets of IOMUX registers
      mx35 iomux: correct input select register index

Shawn Guo (1):
      ARM: mx6: define CONFIG_ARM_ERRATA_742230

Stefan Roese (7):
      arm: imx: Change iomux functions to void type
      imx: Move some header files from arch-mxs to imx-common
      imx: Move some i.MX common functions into the imx-common directory
      dma: Add i.MX6 support to drivers/dma/apbh_dma.c
      mtd: mxs_nand: Add support for i.MX6
      imx: Add titanium board support (i.MX6 based)
      arm: imx: Codingstyle enhancement of include/asm/arch-mx6/crm_regs.h

Stefano Babic (1):
      Merge branch 'next'

 .gitignore                                         |    1 +
 MAINTAINERS                                        |    4 +
 Makefile                                           |    9 +-
 README                                             |    1 +
 arch/arm/cpu/arm1136/mx35/Makefile                 |    1 -
 arch/arm/cpu/arm1136/mx35/iomux.c                  |  114 --
 arch/arm/cpu/arm926ejs/mx25/generic.c              |  117 --
 arch/arm/cpu/arm926ejs/mxs/Makefile                |   10 +
 arch/arm/cpu/arm926ejs/mxs/clock.c                 |   93 ++
 arch/arm/cpu/arm926ejs/mxs/mxs.c                   |   65 +-
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c          |   46 +-
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c        |   50 +-
 arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd         |    4 +-
 arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd         |    4 +-
 arch/arm/cpu/armv7/mx5/Makefile                    |    2 +-
 arch/arm/cpu/armv7/mx5/clock.c                     |   14 +-
 arch/arm/cpu/armv7/mx5/iomux.c                     |  186 ---
 arch/arm/cpu/armv7/mx5/soc.c                       |    7 +
 arch/arm/cpu/armv7/mx6/clock.c                     |   52 +-
 arch/arm/cpu/armv7/mx6/soc.c                       |   11 +-
 arch/arm/imx-common/Makefile                       |   22 +-
 arch/arm/imx-common/iomux-v3.c                     |   18 +-
 arch/arm/imx-common/misc.c                         |   84 ++
 arch/arm/include/asm/arch-mx25/imx-regs.h          |   21 +-
 arch/arm/include/asm/arch-mx25/imx25-pinmux.h      |  421 -------
 arch/arm/include/asm/arch-mx25/iomux-mx25.h        |  545 +++++++++
 arch/arm/include/asm/arch-mx27/imx-regs.h          |    3 +-
 arch/arm/include/asm/arch-mx31/imx-regs.h          |   22 +-
 arch/arm/include/asm/arch-mx35/imx-regs.h          |   19 +-
 arch/arm/include/asm/arch-mx35/iomux-mx35.h        | 1276
++++++++++++++++++++
 arch/arm/include/asm/arch-mx35/iomux.h             |  295 -----
 arch/arm/include/asm/arch-mx35/mx35_pins.h         |  353 ------
 arch/arm/include/asm/arch-mx5/clock.h              |    1 +
 arch/arm/include/asm/arch-mx5/imx-regs.h           |   24 +-
 arch/arm/include/asm/arch-mx5/iomux-mx51.h         |  180 ++-
 arch/arm/include/asm/arch-mx5/iomux-mx53.h         | 1232
+++++++++++++++++++
 arch/arm/include/asm/arch-mx5/iomux.h              |   91 --
 arch/arm/include/asm/arch-mx5/mx5x_pins.h          |  879 --------------
 arch/arm/include/asm/arch-mx5/spl.h                |   19 +
 arch/arm/include/asm/arch-mx6/clock.h              |    1 +
 arch/arm/include/asm/arch-mx6/crm_regs.h           |  183 +--
 arch/arm/include/asm/arch-mx6/imx-regs.h           |   96 +-
 arch/arm/include/asm/arch-mx6/mx6-pins.h           |    4 +
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h         |   35 +-
 arch/arm/include/asm/arch-mx6/mx6q_pins.h          |   27 -
 arch/arm/include/asm/arch-mx6/mx6sl_pins.h         |   25 +
 arch/arm/include/asm/arch-mx6/sys_proto.h          |   10 +
 arch/arm/include/asm/arch-mxs/clock.h              |    1 +
 arch/arm/include/asm/arch-mxs/imx-regs.h           |    6 +-
 arch/arm/include/asm/arch-mxs/iomux.h              |    4 +
 arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h  |    2 +-
 arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h  |    2 +-
 arch/arm/include/asm/arch-mxs/regs-digctl.h        |    2 +-
 arch/arm/include/asm/arch-mxs/regs-i2c.h           |    2 +-
 arch/arm/include/asm/arch-mxs/regs-lcdif.h         |   38 +-
 arch/arm/include/asm/arch-mxs/regs-lradc.h         |    2 +-
 arch/arm/include/asm/arch-mxs/regs-ocotp.h         |    2 +-
 arch/arm/include/asm/arch-mxs/regs-pinctrl.h       |    2 +-
 arch/arm/include/asm/arch-mxs/regs-power-mx23.h    |    2 +-
 arch/arm/include/asm/arch-mxs/regs-power-mx28.h    |    2 +-
 arch/arm/include/asm/arch-mxs/regs-rtc.h           |    2 +-
 arch/arm/include/asm/arch-mxs/regs-ssp.h           |    2 +-
 arch/arm/include/asm/arch-mxs/regs-timrot.h        |    2 +-
 .../arm/include/asm/{arch-mxs => imx-common}/dma.h |   12 +
 arch/arm/include/asm/imx-common/imximage.cfg       |   30 +
 arch/arm/include/asm/imx-common/iomux-v3.h         |   69 +-
 .../asm/{arch-mxs => imx-common}/regs-apbh.h       |   19 +-
 .../asm/{arch-mxs => imx-common}/regs-bch.h        |   12 +-
 .../asm/{arch-mxs => imx-common}/regs-common.h     |    0
 .../asm/{arch-mxs => imx-common}/regs-gpmi.h       |    2 +-
 arch/powerpc/cpu/mpc512x/Makefile                  |    1 -
 arch/powerpc/cpu/mpc512x/cpu_init.c                |    2 +-
 arch/powerpc/cpu/mpc512x/iim.c                     |  394 ------
 arch/powerpc/include/asm/immap_512x.h              |    2 +
 board/CarMediaLab/flea3/flea3.c                    |   91 +-
 board/boundary/nitrogen6x/clocks.cfg               |   11 +
 board/boundary/nitrogen6x/nitrogen6x.c             |   42 +-
 board/denx/m53evk/Makefile                         |   40 +
 board/denx/m53evk/imximage.cfg                     |  108 ++
 board/denx/m53evk/m53evk.c                         |  328 +++++
 board/esg/ima3-mx53/ima3-mx53.c                    |  228 ++--
 board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg       |   11 +
 board/freescale/mx23evk/spl_boot.c                 |    4 +-
 board/freescale/mx25pdk/mx25pdk.c                  |  132 +-
 board/freescale/mx35pdk/mx35pdk.c                  |  175 ++-
 board/freescale/mx51evk/mx51evk.c                  |  348 ++----
 board/freescale/mx51evk/mx51evk_video.c            |   22 +-
 board/freescale/mx53ard/mx53ard.c                  |  329 +++--
 board/freescale/mx53evk/mx53evk.c                  |  289 ++---
 board/freescale/mx53loco/mx53loco.c                |  268 ++--
 board/freescale/mx53loco/mx53loco_video.c          |   68 +-
 board/freescale/mx53smd/mx53smd.c                  |  152 +--
 board/freescale/mx6qarm2/mx6qarm2.c                |   17 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c      |   22 +-
 board/freescale/mx6qsabrelite/mx6qsabrelite.c      |   30 +-
 board/freescale/mx6qsabresd/mx6qsabresd.c          |   30 +-
 board/freescale/mx6slevk/Makefile                  |   28 +
 board/freescale/mx6slevk/imximage.cfg              |  118 ++
 board/freescale/mx6slevk/mx6slevk.c                |  102 ++
 board/freescale/titanium/Makefile                  |   36 +
 board/freescale/titanium/imximage.cfg              |  178 +++
 board/freescale/titanium/titanium.c                |  334 +++++
 board/genesi/mx51_efikamx/efikamx-usb.c            |  122 +-
 board/genesi/mx51_efikamx/efikamx.c                |    2 +-
 board/karo/tx25/tx25.c                             |  107 +-
 board/olimex/mx23_olinuxino/spl_boot.c             |    4 +-
 board/syteco/zmx25/zmx25.c                         |  143 +--
 board/ttcontrol/vision2/vision2.c                  |  585 ++++-----
 board/wandboard/wandboard.c                        |  113 +-
 board/woodburn/woodburn.c                          |   69 +-
 boards.cfg                                         |    3 +
 common/Makefile                                    |    1 +
 common/cmd_fuse.c                                  |  168 +++
 doc/README.fsl_iim                                 |   48 +
 doc/README.fuse                                    |   67 +
 doc/README.imx25                                   |   10 +
 doc/README.imx27                                   |   10 +
 doc/README.imx5                                    |    6 +
 doc/README.imx6                                    |   10 +
 doc/README.imximage                                |   18 +
 doc/README.mxc_ocotp                               |   50 +
 drivers/dma/apbh_dma.c                             |    5 +-
 drivers/misc/Makefile                              |    2 +
 drivers/misc/fsl_iim.c                             |  286 +++++
 drivers/misc/mxc_ocotp.c                           |  216 ++++
 drivers/mmc/mxsmmc.c                               |    2 +-
 drivers/mtd/nand/mxc_nand_spl.c                    |   13 +-
 drivers/mtd/nand/mxs_nand.c                        |   15 +-
 drivers/spi/mxs_spi.c                              |    2 +-
 drivers/usb/host/ehci-mx5.c                        |   73 --
 drivers/video/Makefile                             |    1 +
 drivers/video/cfb_console.c                        |    4 +
 drivers/video/mxsfb.c                              |  189 +++
 include/config_cmd_all.h                           |    1 +
 include/configs/ac14xx.h                           |    5 +
 include/configs/aria.h                             |    2 +-
 include/configs/ima3-mx53.h                        |    3 -
 include/configs/m28evk.h                           |   19 +
 include/configs/m53evk.h                           |  256 ++++
 include/configs/mecp5123.h                         |    2 +-
 include/configs/mpc5121ads.h                       |    2 +-
 include/configs/mx28evk.h                          |    1 +
 include/configs/mx51evk.h                          |   51 +-
 include/configs/mx53ard.h                          |  102 +-
 include/configs/mx53evk.h                          |    1 +
 include/configs/mx53smd.h                          |    1 +
 include/configs/mx6_common.h                       |    1 +
 include/configs/mx6qsabre_common.h                 |   14 +
 include/configs/mx6qsabrelite.h                    |    5 +
 include/configs/mx6slevk.h                         |  189 +++
 include/configs/nitrogen6x.h                       |    5 +
 include/configs/pdm360ng.h                         |    7 +
 include/configs/titanium.h                         |  277 +++++
 include/configs/wandboard.h                        |   24 +-
 .../asm/arch-mx25/sys_proto.h => include/fuse.h    |   30 +-
 include/usb/ehci-fsl.h                             |    6 -
 spl/Makefile                                       |    8 +
 tools/imximage.c                                   |   17 +-
 tools/imximage.h                                   |    9 +-
 tools/mxsboot.c                                    |    8 +-
 160 files changed, 8884 insertions(+), 5340 deletions(-)
 delete mode 100644 arch/arm/cpu/arm1136/mx35/iomux.c
 delete mode 100644 arch/arm/cpu/armv7/mx5/iomux.c
 create mode 100644 arch/arm/imx-common/misc.c
 delete mode 100644 arch/arm/include/asm/arch-mx25/imx25-pinmux.h
 create mode 100644 arch/arm/include/asm/arch-mx25/iomux-mx25.h
 create mode 100644 arch/arm/include/asm/arch-mx35/iomux-mx35.h
 delete mode 100644 arch/arm/include/asm/arch-mx35/iomux.h
 delete mode 100644 arch/arm/include/asm/arch-mx35/mx35_pins.h
 create mode 100644 arch/arm/include/asm/arch-mx5/iomux-mx53.h
 delete mode 100644 arch/arm/include/asm/arch-mx5/iomux.h
 delete mode 100644 arch/arm/include/asm/arch-mx5/mx5x_pins.h
 create mode 100644 arch/arm/include/asm/arch-mx5/spl.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6sl_pins.h
 rename arch/arm/include/asm/{arch-mxs => imx-common}/dma.h (93%)
 create mode 100644 arch/arm/include/asm/imx-common/imximage.cfg
 rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-apbh.h (97%)
 rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-bch.h (96%)
 rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-common.h (100%)
 rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-gpmi.h (99%)
 delete mode 100644 arch/powerpc/cpu/mpc512x/iim.c
 create mode 100644 board/denx/m53evk/Makefile
 create mode 100644 board/denx/m53evk/imximage.cfg
 create mode 100644 board/denx/m53evk/m53evk.c
 create mode 100644 board/freescale/mx6slevk/Makefile
 create mode 100644 board/freescale/mx6slevk/imximage.cfg
 create mode 100644 board/freescale/mx6slevk/mx6slevk.c
 create mode 100644 board/freescale/titanium/Makefile
 create mode 100644 board/freescale/titanium/imximage.cfg
 create mode 100644 board/freescale/titanium/titanium.c
 create mode 100644 common/cmd_fuse.c
 create mode 100644 doc/README.fsl_iim
 create mode 100644 doc/README.fuse
 create mode 100644 doc/README.imx25
 create mode 100644 doc/README.imx27
 create mode 100644 doc/README.imx6
 create mode 100644 doc/README.mxc_ocotp
 create mode 100644 drivers/misc/fsl_iim.c
 create mode 100644 drivers/misc/mxc_ocotp.c
 create mode 100644 drivers/video/mxsfb.c
 create mode 100644 include/configs/m53evk.h
 create mode 100644 include/configs/mx6slevk.h
 create mode 100644 include/configs/titanium.h
 rename arch/arm/include/asm/arch-mx25/sys_proto.h => include/fuse.h (55%)

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-04-14  9:34 Stefano Babic
@ 2013-04-14 13:09 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2013-04-14 13:09 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Sun, 14 Apr 2013 11:34:29 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Sorry Albert,
> 
> there are two more fixes that I have not merged before. Please pull from
> u-boot-imx again, thanks.
> 
> The following changes since commit 0f1411bc8dade4472ca802f46f75714e67301bb0:
> 
>   spi: mxc_spi: Set master mode for all channels (2013-04-13 17:46:42 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 9b74dc56fba2b9db39420f81c990284f36d5801f:
> 
>   fsl_esdhc: Fix DMA transfer completion waiting loop (2013-04-14
> 11:22:47 +0200)
> 
> ----------------------------------------------------------------
> Andrew Gabbasov (1):
>       fsl_esdhc: Fix DMA transfer completion waiting loop
> 
> Eric Nelson (1):
>       fsl_esdhc: flush cache after IO completion
> 
>  drivers/mmc/fsl_esdhc.c |    8 +++-----
>  include/fsl_esdhc.h     |    4 +++-
>  2 files changed, 6 insertions(+), 6 deletions(-)
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-04-14  9:34 Stefano Babic
  2013-04-14 13:09 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2013-04-14  9:34 UTC (permalink / raw)
  To: u-boot

Sorry Albert,

there are two more fixes that I have not merged before. Please pull from
u-boot-imx again, thanks.

The following changes since commit 0f1411bc8dade4472ca802f46f75714e67301bb0:

  spi: mxc_spi: Set master mode for all channels (2013-04-13 17:46:42 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 9b74dc56fba2b9db39420f81c990284f36d5801f:

  fsl_esdhc: Fix DMA transfer completion waiting loop (2013-04-14
11:22:47 +0200)

----------------------------------------------------------------
Andrew Gabbasov (1):
      fsl_esdhc: Fix DMA transfer completion waiting loop

Eric Nelson (1):
      fsl_esdhc: flush cache after IO completion

 drivers/mmc/fsl_esdhc.c |    8 +++-----
 include/fsl_esdhc.h     |    4 +++-
 2 files changed, 6 insertions(+), 6 deletions(-)

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-04-14  7:27 Stefano Babic
@ 2013-04-14  9:21 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2013-04-14  9:21 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Sun, 14 Apr 2013 09:27:34 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hallo Albert,
> 
> I have a couple of fixes for the release. Please pull from u-boot-imx,
> thanks !
> 
> The following changes since commit d36b39bf0d1dbe4ef03f7fc1f20b2e52eb90acf5:
> 
>   spi: mxc_spi: Fix ECSPI reset handling (2013-04-04 10:23:09 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 0f1411bc8dade4472ca802f46f75714e67301bb0:
> 
>   spi: mxc_spi: Set master mode for all channels (2013-04-13 17:46:42 +0200)
> 
> ----------------------------------------------------------------
> Fabio Estevam (1):
>       spi: mxc_spi: Set master mode for all channels
> 
> Otavio Salvador (1):
>       mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no
> arguments
> 
>  arch/arm/include/asm/arch-mx5/imx-regs.h |    1 +
>  arch/arm/include/asm/arch-mx6/imx-regs.h |    1 +
>  drivers/spi/mxc_spi.c                    |   17 +++++++++--------
>  include/configs/mx6qsabre_common.h       |    2 +-
>  4 files changed, 12 insertions(+), 9 deletions(-)
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-04-14  7:27 Stefano Babic
  2013-04-14  9:21 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2013-04-14  7:27 UTC (permalink / raw)
  To: u-boot

Hallo Albert,

I have a couple of fixes for the release. Please pull from u-boot-imx,
thanks !

The following changes since commit d36b39bf0d1dbe4ef03f7fc1f20b2e52eb90acf5:

  spi: mxc_spi: Fix ECSPI reset handling (2013-04-04 10:23:09 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 0f1411bc8dade4472ca802f46f75714e67301bb0:

  spi: mxc_spi: Set master mode for all channels (2013-04-13 17:46:42 +0200)

----------------------------------------------------------------
Fabio Estevam (1):
      spi: mxc_spi: Set master mode for all channels

Otavio Salvador (1):
      mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no
arguments

 arch/arm/include/asm/arch-mx5/imx-regs.h |    1 +
 arch/arm/include/asm/arch-mx6/imx-regs.h |    1 +
 drivers/spi/mxc_spi.c                    |   17 +++++++++--------
 include/configs/mx6qsabre_common.h       |    2 +-
 4 files changed, 12 insertions(+), 9 deletions(-)


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-04-04  8:31 Stefano Babic
@ 2013-04-04 10:31 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2013-04-04 10:31 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Thu, 04 Apr 2013 10:31:56 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> last iMX fixes for the release. Please pull from u-boot-imx, thanks.
> 
> The following changes since commit b27673ccbd3d5435319b5c09c3e7061f559f925d:
> 
>   Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
> (2013-03-15 20:50:43 +0100)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to d36b39bf0d1dbe4ef03f7fc1f20b2e52eb90acf5:
> 
>   spi: mxc_spi: Fix ECSPI reset handling (2013-04-04 10:23:09 +0200)
> 
> ----------------------------------------------------------------
> Abbas Raza (1):
>       mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a board
> 
> Alexandre Pereira da Silva (1):
>       mx23_olinuxino: Fix netboot console
> 
> Beno?t Th?baudeau (1):
>       mx25pdk: Enable imxdi RTC
> 
> Dirk Behme (1):
>       spi: mxc_spi: Fix ECSPI reset handling
> 
> Eric Nelson (2):
>       i.MX6: Add hdmidet command to detect attached HDMI monitor
>       i.MX6: mx6qsabrelite: discard override of CONFIG_ARP_TIMEOUT
> 
> Fabio Estevam (10):
>       mxs: spl_mem_init: Align DDR2 init with FSL bootlets source
>       configs: mx28evk: Use single-line comments
>       mx28evk: Disable CONFIG_CMD_I2C
>       Add initial support for Wandboard dual lite and solo.
>       mx28evk: Introduce a new target for saving env vars to NAND
>       mx6qsabrelite: README: No need to pass 'u-boot.imx'
>       mx6: Fix get_board_rev() for the mx6 solo case
>       wandboard: Remove duplicate 'mmc dev'
>       mx6qsabrelite: Remove duplicate 'mmc dev'
>       wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM
> 
> Javier Martinez Canillas (1):
>       i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe
> command
> 
> Knut Wohlrab (1):
>       imx-common: timer: fix 32-bit overflow
> 
> Otavio Salvador (4):
>       mx6qsabresd: Document the mapping of USDHC[2-4]
>       mx6qsabresd: Fix card detection for invalid card id case
>       mx6qsabre{sd,auto}: Add boot mode select
>       mx23_olinuxino: Change definitions to use spaces instead of tabs
> 
>  MAINTAINERS                                   |    1 +
>  arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c     |   18 +--
>  arch/arm/cpu/armv7/mx6/soc.c                  |   12 ++
>  arch/arm/imx-common/Makefile                  |    1 +
>  arch/arm/imx-common/cmd_hdmidet.c             |   37 +++++
>  arch/arm/imx-common/timer.c                   |   26 +--
>  arch/arm/include/asm/arch-mx6/mx6dl_pins.h    |    3 +
>  board/boundary/nitrogen6x/nitrogen6x.c        |    8 +-
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c |   18 +++
>  board/freescale/mx6qsabrelite/README          |    4 +-
>  board/freescale/mx6qsabrelite/mx6qsabrelite.c |    8 +-
>  board/freescale/mx6qsabresd/mx6qsabresd.c     |   48 ++++--
>  board/wandboard/Makefile                      |   29 ++++
>  board/wandboard/README                        |   40 +++++
>  board/wandboard/wandboard.c                   |  178 +++++++++++++++++++++
>  boards.cfg                                    |    5 +-
>  doc/README.mx28evk                            |   18 +++
>  drivers/mmc/fsl_esdhc.c                       |    7 +
>  drivers/spi/mxc_spi.c                         |    8 +-
>  include/configs/mx23_olinuxino.h              |  162 +++++++++----------
>  include/configs/mx25pdk.h                     |    4 +
>  include/configs/mx28evk.h                     |   92 ++++++-----
>  include/configs/mx6qsabre_common.h            |    2 +
>  include/configs/mx6qsabrelite.h               |    3 -
>  include/configs/wandboard.h                   |  209
> +++++++++++++++++++++++++
>  include/fsl_esdhc.h                           |    1 +
>  26 files changed, 757 insertions(+), 185 deletions(-)
>  create mode 100644 arch/arm/imx-common/cmd_hdmidet.c
>  create mode 100644 board/wandboard/Makefile
>  create mode 100644 board/wandboard/README
>  create mode 100644 board/wandboard/wandboard.c
>  create mode 100644 include/configs/wandboard.h
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-04-04  8:31 Stefano Babic
  2013-04-04 10:31 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2013-04-04  8:31 UTC (permalink / raw)
  To: u-boot

Hi Albert,

last iMX fixes for the release. Please pull from u-boot-imx, thanks.

The following changes since commit b27673ccbd3d5435319b5c09c3e7061f559f925d:

  Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
(2013-03-15 20:50:43 +0100)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to d36b39bf0d1dbe4ef03f7fc1f20b2e52eb90acf5:

  spi: mxc_spi: Fix ECSPI reset handling (2013-04-04 10:23:09 +0200)

----------------------------------------------------------------
Abbas Raza (1):
      mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a board

Alexandre Pereira da Silva (1):
      mx23_olinuxino: Fix netboot console

Beno?t Th?baudeau (1):
      mx25pdk: Enable imxdi RTC

Dirk Behme (1):
      spi: mxc_spi: Fix ECSPI reset handling

Eric Nelson (2):
      i.MX6: Add hdmidet command to detect attached HDMI monitor
      i.MX6: mx6qsabrelite: discard override of CONFIG_ARP_TIMEOUT

Fabio Estevam (10):
      mxs: spl_mem_init: Align DDR2 init with FSL bootlets source
      configs: mx28evk: Use single-line comments
      mx28evk: Disable CONFIG_CMD_I2C
      Add initial support for Wandboard dual lite and solo.
      mx28evk: Introduce a new target for saving env vars to NAND
      mx6qsabrelite: README: No need to pass 'u-boot.imx'
      mx6: Fix get_board_rev() for the mx6 solo case
      wandboard: Remove duplicate 'mmc dev'
      mx6qsabrelite: Remove duplicate 'mmc dev'
      wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM

Javier Martinez Canillas (1):
      i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe
command

Knut Wohlrab (1):
      imx-common: timer: fix 32-bit overflow

Otavio Salvador (4):
      mx6qsabresd: Document the mapping of USDHC[2-4]
      mx6qsabresd: Fix card detection for invalid card id case
      mx6qsabre{sd,auto}: Add boot mode select
      mx23_olinuxino: Change definitions to use spaces instead of tabs

 MAINTAINERS                                   |    1 +
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c     |   18 +--
 arch/arm/cpu/armv7/mx6/soc.c                  |   12 ++
 arch/arm/imx-common/Makefile                  |    1 +
 arch/arm/imx-common/cmd_hdmidet.c             |   37 +++++
 arch/arm/imx-common/timer.c                   |   26 +--
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h    |    3 +
 board/boundary/nitrogen6x/nitrogen6x.c        |    8 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |   18 +++
 board/freescale/mx6qsabrelite/README          |    4 +-
 board/freescale/mx6qsabrelite/mx6qsabrelite.c |    8 +-
 board/freescale/mx6qsabresd/mx6qsabresd.c     |   48 ++++--
 board/wandboard/Makefile                      |   29 ++++
 board/wandboard/README                        |   40 +++++
 board/wandboard/wandboard.c                   |  178 +++++++++++++++++++++
 boards.cfg                                    |    5 +-
 doc/README.mx28evk                            |   18 +++
 drivers/mmc/fsl_esdhc.c                       |    7 +
 drivers/spi/mxc_spi.c                         |    8 +-
 include/configs/mx23_olinuxino.h              |  162 +++++++++----------
 include/configs/mx25pdk.h                     |    4 +
 include/configs/mx28evk.h                     |   92 ++++++-----
 include/configs/mx6qsabre_common.h            |    2 +
 include/configs/mx6qsabrelite.h               |    3 -
 include/configs/wandboard.h                   |  209
+++++++++++++++++++++++++
 include/fsl_esdhc.h                           |    1 +
 26 files changed, 757 insertions(+), 185 deletions(-)
 create mode 100644 arch/arm/imx-common/cmd_hdmidet.c
 create mode 100644 board/wandboard/Makefile
 create mode 100644 board/wandboard/README
 create mode 100644 board/wandboard/wandboard.c
 create mode 100644 include/configs/wandboard.h


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-03-15 20:16   ` Otavio Salvador
@ 2013-03-16 11:16     ` Stefano Babic
  0 siblings, 0 replies; 307+ messages in thread
From: Stefano Babic @ 2013-03-16 11:16 UTC (permalink / raw)
  To: u-boot

On 15/03/2013 21:16, Otavio Salvador wrote:
> Hi Stefano,
> 

Hi Otavio,

> On Fri, Mar 15, 2013 at 3:51 PM, Albert ARIBAUD
> <albert.u.boot@aribaud.net> wrote:
>> Applied to u-boot-arm/master, thanks!
> 
> Could you please merge u-boot-arm/master back into u-boot-imx/master?
> 

Done !

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-03-15 18:51 ` Albert ARIBAUD
@ 2013-03-15 20:16   ` Otavio Salvador
  2013-03-16 11:16     ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Otavio Salvador @ 2013-03-15 20:16 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Fri, Mar 15, 2013 at 3:51 PM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Applied to u-boot-arm/master, thanks!

Could you please merge u-boot-arm/master back into u-boot-imx/master?

-- 
Otavio Salvador                             O.S. Systems
E-mail: otavio at ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-03-15 13:54 Stefano Babic
@ 2013-03-15 18:51 ` Albert ARIBAUD
  2013-03-15 20:16   ` Otavio Salvador
  0 siblings, 1 reply; 307+ messages in thread
From: Albert ARIBAUD @ 2013-03-15 18:51 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Fri, 15 Mar 2013 14:54:06 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> here an update pull request after applying Fabio's fixes.
> 
> The following changes since commit 4cfc611b4a4ce009cfad46804bec2a1caad8e329:
> 
>   ARM: ns9750dev: remove remainders of dead board (2013-02-28 14:49:24
> +0100)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 19a0f7fa271de0345bb2df90d443c547c41e8037:
> 
>   nitrogen: Use unsigned long to specify the total RAM size (2013-03-15
> 14:39:44 +0100)
> 
> ----------------------------------------------------------------
> Beno?t Th?baudeau (6):
>       imx: mx6q DDR3 init: Fix tMRD
>       imx: mx6q DDR3 init: Fix tXPR
>       imx: mx6q DDR3 init: Fix SDE_to_RST
>       imx: mx6q DDR3 init: Fix RST_to_CKE
>       imx: mx6q DDR3 init: Fix MR0.PPD
>       imx: mx6q DDR3 init: Benefit from available CL = 7
> 
> Eric Nelson (8):
>       i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST
>       i.MX6: mx6qsabrelite: indent with tabs
>       i.MX6: consolidate pad names for multi-CPU boards
>       i.MX6: crm_regs: define CCM_CCGRx for use in board config files
>       i.MX6: crm_regs: define IOMUXC_GPR4/6/7
>       i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO
>       i.MX6: Add DDR controller registers
>       Add Boundary Devices Nitrogen6X boards
> 
> Fabio Estevam (6):
>       mx6: Disable Power Down Bit of watchdog
>       mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
>       mx23evk: Turn on caches
>       common: cmd_sata: Fix usage text for 'sata init'
>       mx6: Provide a structure for accessing HDMI registers
>       nitrogen6x: Fix RAM size variable
> 
> Fadil Berisha (2):
>       mxs: timrot: Add support to i.MX23
>       mxs: timrot: Rename local macros
> 
> Marek Vasut (7):
>       mxs: Reset the EMI block on mx23
>       mxs: mmc: spi: dma: Better wrap the MXS differences
>       mxs: spi: Fix the MXS SPI for mx23
>       mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE
>       mxs: Squash the header file usage in ehci-mxs
>       mxs: Make ehci-mxs multiport capable
>       mxs: m28: Enable power to USB port 0
> 
> Otavio Salvador (11):
>       build: imx: Fix 'u-boot.imx' build without full OBJTREE reference
>       mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to
> CONFIG_SPL_MXS_PSWITCH_WAIT
>       mx23: Document the tRAS lockout setting in memory initialization
>       mx23evk: Adjust DRAM control register to use full 128MB of RAM
>       led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
>       mxs: Fix iomux.h to not break build during assembly stage
>       mx23_olinuxino: Add support for status LED
>       mx23evk: Enable USB support
>       mx23_olinuxino: Enable USB support
>       mx23_olinuxino: Add ethernet support
>       mx23_olinuxino: Fix warning for implicit declaration
> 
> Stefano Babic (3):
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
>       USB: drop unneeded header in ehci-mx6
> 
> Stephen Warren (1):
>       ARM: mx6: use common CPU errata config options
> 
> fabio.estevam at freescale.com (1):
>       nitrogen: Use unsigned long to specify the total RAM size
> 
>  MAINTAINERS                                        |    8 +
>  Makefile                                           |    4 +-
>  arch/arm/cpu/arm926ejs/config.mk                   |    2 +-
>  arch/arm/cpu/arm926ejs/mxs/clock.c                 |    3 +-
>  arch/arm/cpu/arm926ejs/mxs/mxs_init.h              |    2 +-
>  arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c          |   16 +-
>  arch/arm/cpu/arm926ejs/mxs/spl_power_init.c        |    2 +-
>  arch/arm/cpu/arm926ejs/mxs/timer.c                 |   39 +-
>  arch/arm/cpu/armv7/Makefile                        |    2 +-
>  arch/arm/cpu/armv7/config.mk                       |    2 +-
>  arch/arm/cpu/armv7/mx6/Makefile                    |    1 -
>  arch/arm/cpu/armv7/mx6/lowlevel_init.S             |   35 -
>  arch/arm/cpu/armv7/mx6/soc.c                       |   16 +
>  arch/arm/include/asm/arch-mx6/crm_regs.h           |   12 +
>  arch/arm/include/asm/arch-mx6/imx-regs.h           |    8 +
>  arch/arm/include/asm/arch-mx6/iomux.h              |    5 +
>  arch/arm/include/asm/arch-mx6/mx6-ddr.h            |   85 +
>  arch/arm/include/asm/arch-mx6/mx6-pins.h           |   31 +
>  arch/arm/include/asm/arch-mx6/mx6dl-ddr.h          |   71 +
>  arch/arm/include/asm/arch-mx6/mx6dl_pins.h         |  193 +--
>  arch/arm/include/asm/arch-mx6/mx6q-ddr.h           |   69 +
>  arch/arm/include/asm/arch-mx6/mx6q_pins.h          | 1671
> ++++++++++++++++++++
>  arch/arm/include/asm/arch-mx6/mx6x_pins.h          | 1671
> --------------------
>  arch/arm/include/asm/arch-mx6/mxc_hdmi.h           | 1083 ++++++-------
>  arch/arm/include/asm/arch-mxs/dma.h                |   19 +-
>  arch/arm/include/asm/arch-mxs/imx-regs.h           |    2 +
>  arch/arm/include/asm/arch-mxs/iomux.h              |    5 +
>  arch/arm/include/asm/arch-mxs/regs-ssp.h           |   26 +
>  arch/arm/include/asm/arch-mxs/regs-timrot.h        |  101 ++
>  board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg    |   58 +
>  board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg    |   58 +
>  board/boundary/nitrogen6x/6x_bootscript.txt        |   63 +
>  .../boundary/nitrogen6x/6x_bootscript_android.txt  |   64 +
>  .../nitrogen6x/6x_bootscript_android_recovery.txt  |   64 +
>  board/boundary/nitrogen6x/6x_upgrade.txt           |   45 +
>  board/boundary/nitrogen6x/800mhz_2x128mx16.cfg     |   58 +
>  board/boundary/nitrogen6x/800mhz_2x256mx16.cfg     |   58 +
>  board/boundary/nitrogen6x/800mhz_4x128mx16.cfg     |   57 +
>  board/boundary/nitrogen6x/800mhz_4x256mx16.cfg     |   58 +
>  board/boundary/nitrogen6x/Makefile                 |   41 +
>  board/boundary/nitrogen6x/README                   |   92 ++
>  board/boundary/nitrogen6x/clocks.cfg               |   46 +
>  board/boundary/nitrogen6x/ddr-setup.cfg            |  112 ++
>  board/boundary/nitrogen6x/nitrogen6dl.cfg          |   45 +
>  board/boundary/nitrogen6x/nitrogen6dl2g.cfg        |   45 +
>  board/boundary/nitrogen6x/nitrogen6q.cfg           |   45 +
>  board/boundary/nitrogen6x/nitrogen6q2g.cfg         |   45 +
>  board/boundary/nitrogen6x/nitrogen6s.cfg           |   45 +
>  board/boundary/nitrogen6x/nitrogen6s1g.cfg         |   45 +
>  board/boundary/nitrogen6x/nitrogen6x.c             |  895 +++++++++++
>  board/denx/m28evk/m28evk.c                         |    4 +
>  board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg       |   10 +-
>  board/freescale/mx23evk/spl_boot.c                 |   10 +
>  board/freescale/mx6qarm2/mx6qarm2.c                |   78 +-
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c      |   60 +-
>  board/freescale/mx6qsabrelite/mx6qsabrelite.c      |  292 ++--
>  board/freescale/mx6qsabresd/mx6qsabresd.c          |  102 +-
>  board/olimex/mx23_olinuxino/mx23_olinuxino.c       |   13 +
>  board/olimex/mx23_olinuxino/spl_boot.c             |    8 +
>  boards.cfg                                         |    6 +
>  common/cmd_led.c                                   |    6 +-
>  common/cmd_sata.c                                  |    2 +-
>  drivers/mmc/mxsmmc.c                               |   20 +-
>  drivers/spi/mxs_spi.c                              |   39 +-
>  drivers/usb/host/ehci-mx6.c                        |    1 -
>  drivers/usb/host/ehci-mxs.c                        |  155 +-
>  include/configs/apx4devkit.h                       |    3 +-
>  include/configs/m28evk.h                           |    5 +-
>  include/configs/mx23_olinuxino.h                   |   64 +-
>  include/configs/mx23evk.h                          |   14 +-
>  include/configs/mx28evk.h                          |    4 +-
>  include/configs/mx6_common.h                       |   23 +
>  include/configs/mx6qarm2.h                         |    3 +
>  include/configs/mx6qsabre_common.h                 |    4 +
>  include/configs/mx6qsabrelite.h                    |    4 +
>  include/configs/nitrogen6x.h                       |  285 ++++
>  include/configs/sc_sps_1.h                         |    3 +-
>  77 files changed, 5683 insertions(+), 2758 deletions(-)
>  delete mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6-ddr.h
>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6-pins.h
>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl-ddr.h
>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6q-ddr.h
>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6q_pins.h
>  delete mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
>  create mode 100644 board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg
>  create mode 100644 board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
>  create mode 100644 board/boundary/nitrogen6x/6x_bootscript.txt
>  create mode 100644 board/boundary/nitrogen6x/6x_bootscript_android.txt
>  create mode 100644
> board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt
>  create mode 100644 board/boundary/nitrogen6x/6x_upgrade.txt
>  create mode 100644 board/boundary/nitrogen6x/800mhz_2x128mx16.cfg
>  create mode 100644 board/boundary/nitrogen6x/800mhz_2x256mx16.cfg
>  create mode 100644 board/boundary/nitrogen6x/800mhz_4x128mx16.cfg
>  create mode 100644 board/boundary/nitrogen6x/800mhz_4x256mx16.cfg
>  create mode 100644 board/boundary/nitrogen6x/Makefile
>  create mode 100644 board/boundary/nitrogen6x/README
>  create mode 100644 board/boundary/nitrogen6x/clocks.cfg
>  create mode 100644 board/boundary/nitrogen6x/ddr-setup.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6dl.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6dl2g.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6q.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6q2g.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6s.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6s1g.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6x.c
>  create mode 100644 include/configs/mx6_common.h
>  create mode 100644 include/configs/nitrogen6x.h
> 
> 
> Best regards,
> Stefano
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-03-15 13:54 Stefano Babic
  2013-03-15 18:51 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2013-03-15 13:54 UTC (permalink / raw)
  To: u-boot

Hi Albert,

here an update pull request after applying Fabio's fixes.

The following changes since commit 4cfc611b4a4ce009cfad46804bec2a1caad8e329:

  ARM: ns9750dev: remove remainders of dead board (2013-02-28 14:49:24
+0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 19a0f7fa271de0345bb2df90d443c547c41e8037:

  nitrogen: Use unsigned long to specify the total RAM size (2013-03-15
14:39:44 +0100)

----------------------------------------------------------------
Beno?t Th?baudeau (6):
      imx: mx6q DDR3 init: Fix tMRD
      imx: mx6q DDR3 init: Fix tXPR
      imx: mx6q DDR3 init: Fix SDE_to_RST
      imx: mx6q DDR3 init: Fix RST_to_CKE
      imx: mx6q DDR3 init: Fix MR0.PPD
      imx: mx6q DDR3 init: Benefit from available CL = 7

Eric Nelson (8):
      i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST
      i.MX6: mx6qsabrelite: indent with tabs
      i.MX6: consolidate pad names for multi-CPU boards
      i.MX6: crm_regs: define CCM_CCGRx for use in board config files
      i.MX6: crm_regs: define IOMUXC_GPR4/6/7
      i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO
      i.MX6: Add DDR controller registers
      Add Boundary Devices Nitrogen6X boards

Fabio Estevam (6):
      mx6: Disable Power Down Bit of watchdog
      mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
      mx23evk: Turn on caches
      common: cmd_sata: Fix usage text for 'sata init'
      mx6: Provide a structure for accessing HDMI registers
      nitrogen6x: Fix RAM size variable

Fadil Berisha (2):
      mxs: timrot: Add support to i.MX23
      mxs: timrot: Rename local macros

Marek Vasut (7):
      mxs: Reset the EMI block on mx23
      mxs: mmc: spi: dma: Better wrap the MXS differences
      mxs: spi: Fix the MXS SPI for mx23
      mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE
      mxs: Squash the header file usage in ehci-mxs
      mxs: Make ehci-mxs multiport capable
      mxs: m28: Enable power to USB port 0

Otavio Salvador (11):
      build: imx: Fix 'u-boot.imx' build without full OBJTREE reference
      mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to
CONFIG_SPL_MXS_PSWITCH_WAIT
      mx23: Document the tRAS lockout setting in memory initialization
      mx23evk: Adjust DRAM control register to use full 128MB of RAM
      led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
      mxs: Fix iomux.h to not break build during assembly stage
      mx23_olinuxino: Add support for status LED
      mx23evk: Enable USB support
      mx23_olinuxino: Enable USB support
      mx23_olinuxino: Add ethernet support
      mx23_olinuxino: Fix warning for implicit declaration

Stefano Babic (3):
      Merge branch 'master' of git://git.denx.de/u-boot-arm
      Merge branch 'master' of git://git.denx.de/u-boot-arm
      USB: drop unneeded header in ehci-mx6

Stephen Warren (1):
      ARM: mx6: use common CPU errata config options

fabio.estevam at freescale.com (1):
      nitrogen: Use unsigned long to specify the total RAM size

 MAINTAINERS                                        |    8 +
 Makefile                                           |    4 +-
 arch/arm/cpu/arm926ejs/config.mk                   |    2 +-
 arch/arm/cpu/arm926ejs/mxs/clock.c                 |    3 +-
 arch/arm/cpu/arm926ejs/mxs/mxs_init.h              |    2 +-
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c          |   16 +-
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c        |    2 +-
 arch/arm/cpu/arm926ejs/mxs/timer.c                 |   39 +-
 arch/arm/cpu/armv7/Makefile                        |    2 +-
 arch/arm/cpu/armv7/config.mk                       |    2 +-
 arch/arm/cpu/armv7/mx6/Makefile                    |    1 -
 arch/arm/cpu/armv7/mx6/lowlevel_init.S             |   35 -
 arch/arm/cpu/armv7/mx6/soc.c                       |   16 +
 arch/arm/include/asm/arch-mx6/crm_regs.h           |   12 +
 arch/arm/include/asm/arch-mx6/imx-regs.h           |    8 +
 arch/arm/include/asm/arch-mx6/iomux.h              |    5 +
 arch/arm/include/asm/arch-mx6/mx6-ddr.h            |   85 +
 arch/arm/include/asm/arch-mx6/mx6-pins.h           |   31 +
 arch/arm/include/asm/arch-mx6/mx6dl-ddr.h          |   71 +
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h         |  193 +--
 arch/arm/include/asm/arch-mx6/mx6q-ddr.h           |   69 +
 arch/arm/include/asm/arch-mx6/mx6q_pins.h          | 1671
++++++++++++++++++++
 arch/arm/include/asm/arch-mx6/mx6x_pins.h          | 1671
--------------------
 arch/arm/include/asm/arch-mx6/mxc_hdmi.h           | 1083 ++++++-------
 arch/arm/include/asm/arch-mxs/dma.h                |   19 +-
 arch/arm/include/asm/arch-mxs/imx-regs.h           |    2 +
 arch/arm/include/asm/arch-mxs/iomux.h              |    5 +
 arch/arm/include/asm/arch-mxs/regs-ssp.h           |   26 +
 arch/arm/include/asm/arch-mxs/regs-timrot.h        |  101 ++
 board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg    |   58 +
 board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg    |   58 +
 board/boundary/nitrogen6x/6x_bootscript.txt        |   63 +
 .../boundary/nitrogen6x/6x_bootscript_android.txt  |   64 +
 .../nitrogen6x/6x_bootscript_android_recovery.txt  |   64 +
 board/boundary/nitrogen6x/6x_upgrade.txt           |   45 +
 board/boundary/nitrogen6x/800mhz_2x128mx16.cfg     |   58 +
 board/boundary/nitrogen6x/800mhz_2x256mx16.cfg     |   58 +
 board/boundary/nitrogen6x/800mhz_4x128mx16.cfg     |   57 +
 board/boundary/nitrogen6x/800mhz_4x256mx16.cfg     |   58 +
 board/boundary/nitrogen6x/Makefile                 |   41 +
 board/boundary/nitrogen6x/README                   |   92 ++
 board/boundary/nitrogen6x/clocks.cfg               |   46 +
 board/boundary/nitrogen6x/ddr-setup.cfg            |  112 ++
 board/boundary/nitrogen6x/nitrogen6dl.cfg          |   45 +
 board/boundary/nitrogen6x/nitrogen6dl2g.cfg        |   45 +
 board/boundary/nitrogen6x/nitrogen6q.cfg           |   45 +
 board/boundary/nitrogen6x/nitrogen6q2g.cfg         |   45 +
 board/boundary/nitrogen6x/nitrogen6s.cfg           |   45 +
 board/boundary/nitrogen6x/nitrogen6s1g.cfg         |   45 +
 board/boundary/nitrogen6x/nitrogen6x.c             |  895 +++++++++++
 board/denx/m28evk/m28evk.c                         |    4 +
 board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg       |   10 +-
 board/freescale/mx23evk/spl_boot.c                 |   10 +
 board/freescale/mx6qarm2/mx6qarm2.c                |   78 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c      |   60 +-
 board/freescale/mx6qsabrelite/mx6qsabrelite.c      |  292 ++--
 board/freescale/mx6qsabresd/mx6qsabresd.c          |  102 +-
 board/olimex/mx23_olinuxino/mx23_olinuxino.c       |   13 +
 board/olimex/mx23_olinuxino/spl_boot.c             |    8 +
 boards.cfg                                         |    6 +
 common/cmd_led.c                                   |    6 +-
 common/cmd_sata.c                                  |    2 +-
 drivers/mmc/mxsmmc.c                               |   20 +-
 drivers/spi/mxs_spi.c                              |   39 +-
 drivers/usb/host/ehci-mx6.c                        |    1 -
 drivers/usb/host/ehci-mxs.c                        |  155 +-
 include/configs/apx4devkit.h                       |    3 +-
 include/configs/m28evk.h                           |    5 +-
 include/configs/mx23_olinuxino.h                   |   64 +-
 include/configs/mx23evk.h                          |   14 +-
 include/configs/mx28evk.h                          |    4 +-
 include/configs/mx6_common.h                       |   23 +
 include/configs/mx6qarm2.h                         |    3 +
 include/configs/mx6qsabre_common.h                 |    4 +
 include/configs/mx6qsabrelite.h                    |    4 +
 include/configs/nitrogen6x.h                       |  285 ++++
 include/configs/sc_sps_1.h                         |    3 +-
 77 files changed, 5683 insertions(+), 2758 deletions(-)
 delete mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6-ddr.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6-pins.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl-ddr.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6q-ddr.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6q_pins.h
 delete mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
 create mode 100644 board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/6x_bootscript.txt
 create mode 100644 board/boundary/nitrogen6x/6x_bootscript_android.txt
 create mode 100644
board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt
 create mode 100644 board/boundary/nitrogen6x/6x_upgrade.txt
 create mode 100644 board/boundary/nitrogen6x/800mhz_2x128mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/800mhz_2x256mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/800mhz_4x128mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/800mhz_4x256mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/Makefile
 create mode 100644 board/boundary/nitrogen6x/README
 create mode 100644 board/boundary/nitrogen6x/clocks.cfg
 create mode 100644 board/boundary/nitrogen6x/ddr-setup.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6dl.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6dl2g.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6q.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6q2g.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6s.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6s1g.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6x.c
 create mode 100644 include/configs/mx6_common.h
 create mode 100644 include/configs/nitrogen6x.h


Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-03-13  8:43 Stefano Babic
@ 2013-03-13 12:29 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2013-03-13 12:29 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Wed, 13 Mar 2013 09:43:46 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks. A question about the patch "ARM:
> implement some Cortex-A9 errata workarounds"
> 
> 	http://patchwork.ozlabs.org/patch/223419/
> 
> I read the general agreement about it, and I have applied 2/3, because
> this is i.MX-related. However, the effect is worthless for i.MX6 until
> 1/3 will be applied. I read before applying that you will merge it, but
> I have not found it in arm-tree. Do you see any problem on it ? If you
> do not plan to apply it, it is better I revert 2/3, else the errata will
> not be set for i.MX6.

Sorry -- I should have taken 1/3 and 2/3 and haven't yet. No worries,
though: I'll take them in, then merge your tree; you don't need to
revert 2/3, it'll merge properly anyway.

> Thanks,
> Stefano

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-03-13  8:43 Stefano Babic
  2013-03-13 12:29 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2013-03-13  8:43 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks. A question about the patch "ARM:
implement some Cortex-A9 errata workarounds"

	http://patchwork.ozlabs.org/patch/223419/

I read the general agreement about it, and I have applied 2/3, because
this is i.MX-related. However, the effect is worthless for i.MX6 until
1/3 will be applied. I read before applying that you will merge it, but
I have not found it in arm-tree. Do you see any problem on it ? If you
do not plan to apply it, it is better I revert 2/3, else the errata will
not be set for i.MX6.


The following changes since commit 4cfc611b4a4ce009cfad46804bec2a1caad8e329:

  ARM: ns9750dev: remove remainders of dead board (2013-02-28 14:49:24
+0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to d67b0d97b156f9ec2fc4c838d84b1e510d6e49b4:

  Add Boundary Devices Nitrogen6X boards (2013-03-13 09:04:24 +0100)

----------------------------------------------------------------
Beno?t Th?baudeau (6):
      imx: mx6q DDR3 init: Fix tMRD
      imx: mx6q DDR3 init: Fix tXPR
      imx: mx6q DDR3 init: Fix SDE_to_RST
      imx: mx6q DDR3 init: Fix RST_to_CKE
      imx: mx6q DDR3 init: Fix MR0.PPD
      imx: mx6q DDR3 init: Benefit from available CL = 7

Eric Nelson (8):
      i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST
      i.MX6: mx6qsabrelite: indent with tabs
      i.MX6: consolidate pad names for multi-CPU boards
      i.MX6: crm_regs: define CCM_CCGRx for use in board config files
      i.MX6: crm_regs: define IOMUXC_GPR4/6/7
      i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO
      i.MX6: Add DDR controller registers
      Add Boundary Devices Nitrogen6X boards

Fabio Estevam (5):
      mx6: Disable Power Down Bit of watchdog
      mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
      mx23evk: Turn on caches
      common: cmd_sata: Fix usage text for 'sata init'
      mx6: Provide a structure for accessing HDMI registers

Fadil Berisha (2):
      mxs: timrot: Add support to i.MX23
      mxs: timrot: Rename local macros

Marek Vasut (7):
      mxs: Reset the EMI block on mx23
      mxs: mmc: spi: dma: Better wrap the MXS differences
      mxs: spi: Fix the MXS SPI for mx23
      mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE
      mxs: Squash the header file usage in ehci-mxs
      mxs: Make ehci-mxs multiport capable
      mxs: m28: Enable power to USB port 0

Otavio Salvador (11):
      build: imx: Fix 'u-boot.imx' build without full OBJTREE reference
      mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to
CONFIG_SPL_MXS_PSWITCH_WAIT
      mx23: Document the tRAS lockout setting in memory initialization
      mx23evk: Adjust DRAM control register to use full 128MB of RAM
      led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
      mxs: Fix iomux.h to not break build during assembly stage
      mx23_olinuxino: Add support for status LED
      mx23evk: Enable USB support
      mx23_olinuxino: Enable USB support
      mx23_olinuxino: Add ethernet support
      mx23_olinuxino: Fix warning for implicit declaration

Stefano Babic (3):
      Merge branch 'master' of git://git.denx.de/u-boot-arm
      Merge branch 'master' of git://git.denx.de/u-boot-arm
      USB: drop unneeded header in ehci-mx6

Stephen Warren (1):
      ARM: mx6: use common CPU errata config options

 MAINTAINERS                                        |    8 +
 Makefile                                           |    4 +-
 arch/arm/cpu/arm926ejs/config.mk                   |    2 +-
 arch/arm/cpu/arm926ejs/mxs/clock.c                 |    3 +-
 arch/arm/cpu/arm926ejs/mxs/mxs_init.h              |    2 +-
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c          |   16 +-
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c        |    2 +-
 arch/arm/cpu/arm926ejs/mxs/timer.c                 |   39 +-
 arch/arm/cpu/armv7/Makefile                        |    2 +-
 arch/arm/cpu/armv7/config.mk                       |    2 +-
 arch/arm/cpu/armv7/mx6/Makefile                    |    1 -
 arch/arm/cpu/armv7/mx6/lowlevel_init.S             |   35 -
 arch/arm/cpu/armv7/mx6/soc.c                       |   16 +
 arch/arm/include/asm/arch-mx6/crm_regs.h           |   12 +
 arch/arm/include/asm/arch-mx6/imx-regs.h           |    8 +
 arch/arm/include/asm/arch-mx6/iomux.h              |    5 +
 arch/arm/include/asm/arch-mx6/mx6-ddr.h            |   85 +
 arch/arm/include/asm/arch-mx6/mx6-pins.h           |   31 +
 arch/arm/include/asm/arch-mx6/mx6dl-ddr.h          |   71 +
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h         |  193 +--
 arch/arm/include/asm/arch-mx6/mx6q-ddr.h           |   69 +
 arch/arm/include/asm/arch-mx6/mx6q_pins.h          | 1671
++++++++++++++++++++
 arch/arm/include/asm/arch-mx6/mx6x_pins.h          | 1671
--------------------
 arch/arm/include/asm/arch-mx6/mxc_hdmi.h           | 1083 ++++++-------
 arch/arm/include/asm/arch-mxs/dma.h                |   19 +-
 arch/arm/include/asm/arch-mxs/imx-regs.h           |    2 +
 arch/arm/include/asm/arch-mxs/iomux.h              |    5 +
 arch/arm/include/asm/arch-mxs/regs-ssp.h           |   26 +
 arch/arm/include/asm/arch-mxs/regs-timrot.h        |  101 ++
 board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg    |   58 +
 board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg    |   58 +
 board/boundary/nitrogen6x/6x_bootscript.txt        |   63 +
 .../boundary/nitrogen6x/6x_bootscript_android.txt  |   64 +
 .../nitrogen6x/6x_bootscript_android_recovery.txt  |   64 +
 board/boundary/nitrogen6x/6x_upgrade.txt           |   45 +
 board/boundary/nitrogen6x/800mhz_2x128mx16.cfg     |   58 +
 board/boundary/nitrogen6x/800mhz_2x256mx16.cfg     |   58 +
 board/boundary/nitrogen6x/800mhz_4x128mx16.cfg     |   57 +
 board/boundary/nitrogen6x/800mhz_4x256mx16.cfg     |   58 +
 board/boundary/nitrogen6x/Makefile                 |   41 +
 board/boundary/nitrogen6x/README                   |   92 ++
 board/boundary/nitrogen6x/clocks.cfg               |   46 +
 board/boundary/nitrogen6x/ddr-setup.cfg            |  112 ++
 board/boundary/nitrogen6x/nitrogen6dl.cfg          |   45 +
 board/boundary/nitrogen6x/nitrogen6dl2g.cfg        |   45 +
 board/boundary/nitrogen6x/nitrogen6q.cfg           |   45 +
 board/boundary/nitrogen6x/nitrogen6q2g.cfg         |   45 +
 board/boundary/nitrogen6x/nitrogen6s.cfg           |   45 +
 board/boundary/nitrogen6x/nitrogen6s1g.cfg         |   45 +
 board/boundary/nitrogen6x/nitrogen6x.c             |  895 +++++++++++
 board/denx/m28evk/m28evk.c                         |    4 +
 board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg       |   10 +-
 board/freescale/mx23evk/spl_boot.c                 |   10 +
 board/freescale/mx6qarm2/mx6qarm2.c                |   78 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c      |   60 +-
 board/freescale/mx6qsabrelite/mx6qsabrelite.c      |  292 ++--
 board/freescale/mx6qsabresd/mx6qsabresd.c          |  102 +-
 board/olimex/mx23_olinuxino/mx23_olinuxino.c       |   13 +
 board/olimex/mx23_olinuxino/spl_boot.c             |    8 +
 boards.cfg                                         |    6 +
 common/cmd_led.c                                   |    6 +-
 common/cmd_sata.c                                  |    2 +-
 drivers/mmc/mxsmmc.c                               |   20 +-
 drivers/spi/mxs_spi.c                              |   39 +-
 drivers/usb/host/ehci-mx6.c                        |    1 -
 drivers/usb/host/ehci-mxs.c                        |  155 +-
 include/configs/apx4devkit.h                       |    3 +-
 include/configs/m28evk.h                           |    5 +-
 include/configs/mx23_olinuxino.h                   |   64 +-
 include/configs/mx23evk.h                          |   14 +-
 include/configs/mx28evk.h                          |    4 +-
 include/configs/mx6_common.h                       |   23 +
 include/configs/mx6qarm2.h                         |    3 +
 include/configs/mx6qsabre_common.h                 |    4 +
 include/configs/mx6qsabrelite.h                    |    4 +
 include/configs/nitrogen6x.h                       |  285 ++++
 include/configs/sc_sps_1.h                         |    3 +-
 77 files changed, 5683 insertions(+), 2758 deletions(-)
 delete mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6-ddr.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6-pins.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl-ddr.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6q-ddr.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6q_pins.h
 delete mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
 create mode 100644 board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/6x_bootscript.txt
 create mode 100644 board/boundary/nitrogen6x/6x_bootscript_android.txt
 create mode 100644
board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt
 create mode 100644 board/boundary/nitrogen6x/6x_upgrade.txt
 create mode 100644 board/boundary/nitrogen6x/800mhz_2x128mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/800mhz_2x256mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/800mhz_4x128mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/800mhz_4x256mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/Makefile
 create mode 100644 board/boundary/nitrogen6x/README
 create mode 100644 board/boundary/nitrogen6x/clocks.cfg
 create mode 100644 board/boundary/nitrogen6x/ddr-setup.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6dl.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6dl2g.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6q.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6q2g.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6s.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6s1g.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6x.c
 create mode 100644 include/configs/mx6_common.h
 create mode 100644 include/configs/nitrogen6x.h


Thanks,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-01-28 22:25 Stefano Babic
@ 2013-02-02 22:08 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2013-02-02 22:08 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Mon, 28 Jan 2013 23:25:18 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx (last fixes), thanks.
> 
> The following changes since commit 3a9d879f6f64585b819af728b53be0a05037fe0d:
> 
>   Prepare v2013.01 (2013-01-15 14:47:42 -0700)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 81ca840976e8e418ae8decaf03ea01f59b1b5be2:
> 
>   mx23evk: Add initial board support (2013-01-28 11:51:04 +0100)
> 
> ----------------------------------------------------------------
> Fabio Estevam (4):
>       woodburn: Set Write Protection GPIO as input
>       mx6qsabre_common: Let mmc partition be board specific
>       tools: imximage: Let .name field be more generic
>       mxs: Use __weak annotation to simplify code
> 
> Knut Wohlrab (1):
>       mx6qsabreauto: enable USB host interface
> 
> Marek Vasut (14):
>       mxs: mmc: Drop unused members from struct mxsmmc_priv
>       mxs: ssp: Pull out the SSP bus to regs conversion
>       mx23: Add POWER and CLKCTRL register definitions
>       mx23: ssp: Fix ssp-regs.h for MX23
>       mmc: Limit the number of used SSP ports on MX23
>       mxs: Add function to ungate the power block on MX23
>       mxs: Linux uses ttyAMA0 as DUART
>       mxs: Add MX23 olinuxino board support
>       mxs: Boost the memory power supply
>       mxs: dma: Fix APBH DMA driver for MX23
>       mxs: ssp: Add SSP registers map for MX23
>       mxs: mmc: Allow overriding default card detect implementation
>       mxs: mmc: Fix the MMC driver for MX23
>       mxs: mmc: mx23_olinuxino: Add MMC support
> 
> Otavio Salvador (14):
>       mxs: clock: Use 'mxs' prefix for methods
>       mx23: Add register base addresses
>       mx23: Add iomux-mx23.h
>       mx23: Add support on print_cpuinfo()
>       mx23: Add boot mode description
>       mx23: SPL: Add boot mode support
>       mx23: SPL: Initialize DDR at 133MHz
>       mx23: config: Enable building of u-boot.sb binary
>       mx23: config: Enable mxsboot tool for i.MX23 based boards
>       mxs: Fix the memory init for MX23
>       mxs: Add MX23 quirks into the clock code
>       mxs: mmc: Fix MMC reset on iMX23
>       mx23_olinuxino: Add default environment
>       mx23evk: Add initial board support
> 
> Troy Kisky (10):
>       imximage.cfg: run files through C preprocessor
>       doc/README.fec_mxc: add documentation
>       net: fec_mxc: delete CONFIG_FEC_MXC_MULTI
>       net: fec_mxc: change fec_mii_setspeed parameter
>       net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multi
>       phy: add phy_find_by_mask/phy_connect_dev
>       net: fec_mxc: use fec_set_dev_name to set name
>       net: fec_mxc: only call phy_connect in fec_probe
>       net: fec_mxc: get phydev before fec_probe
>       mx6qsabrelite: search mii phy address 4-7
> 
>  .gitignore                                        |    1 +
>  MAINTAINERS                                       |    5 +
>  Makefile                                          |    9 +-
>  arch/arm/cpu/arm926ejs/config.mk                  |    2 +-
>  arch/arm/cpu/arm926ejs/mxs/clock.c                |   83 +++--
>  arch/arm/cpu/arm926ejs/mxs/mxs.c                  |   25 +-
>  arch/arm/cpu/arm926ejs/mxs/spl_boot.c             |   25 ++
>  arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c         |  118 +++++--
>  arch/arm/cpu/arm926ejs/mxs/spl_power_init.c       |   12 +
>  arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd        |   18 ++
>  arch/arm/cpu/armv7/config.mk                      |    2 +-
>  arch/arm/imx-common/Makefile                      |   13 +
>  arch/arm/include/asm/arch-mxs/clock.h             |   14 +-
>  arch/arm/include/asm/arch-mxs/imx-regs.h          |    7 +-
>  arch/arm/include/asm/arch-mxs/iomux-mx23.h        |  355
> ++++++++++++++++++++
>  arch/arm/include/asm/arch-mxs/regs-apbh.h         |  121 +++++++
>  arch/arm/include/asm/arch-mxs/regs-base.h         |   56 +++-
>  arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h |  221 +++++++++++++
>  arch/arm/include/asm/arch-mxs/regs-digctl.h       |    1 +
>  arch/arm/include/asm/arch-mxs/regs-power-mx23.h   |  358
> +++++++++++++++++++++
>  arch/arm/include/asm/arch-mxs/regs-ssp.h          |   54 ++++
>  arch/arm/include/asm/arch-mxs/sys_proto.h         |   20 +-
>  board/bluegiga/apx4devkit/apx4devkit.c            |    8 +-
>  board/denx/m28evk/m28evk.c                        |   10 +-
>  board/esg/ima3-mx53/imximage.cfg                  |  120 +++----
>  board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg      |   90 +++---
>  board/freescale/mx23evk/Makefile                  |   47 +++
>  board/freescale/mx23evk/mx23evk.c                 |   83 +++++
>  board/freescale/mx23evk/spl_boot.c                |  104 ++++++
>  board/freescale/mx25pdk/imximage.cfg              |   77 ++---
>  board/freescale/mx28evk/mx28evk.c                 |   10 +-
>  board/freescale/mx51evk/imximage.cfg              |  114 +++----
>  board/freescale/mx53ard/imximage_dd3.cfg          |   83 ++---
>  board/freescale/mx53evk/imximage.cfg              |   86 ++---
>  board/freescale/mx53loco/imximage.cfg             |   83 ++---
>  board/freescale/mx53smd/imximage.cfg              |   83 ++---
>  board/freescale/mx6qarm2/imximage.cfg             |   88 ++---
>  board/freescale/mx6qsabreauto/imximage.cfg        |   82 ++---
>  board/freescale/mx6qsabrelite/mx6qsabrelite.c     |   24 +-
>  board/genesi/mx51_efikamx/imximage_mx.cfg         |  132 ++++----
>  board/genesi/mx51_efikamx/imximage_sb.cfg         |  126 ++++----
>  board/olimex/mx23_olinuxino/Makefile              |   47 +++
>  board/olimex/mx23_olinuxino/mx23_olinuxino.c      |   71 ++++
>  board/olimex/mx23_olinuxino/spl_boot.c            |   99 ++++++
>  board/schulercontrol/sc_sps_1/sc_sps_1.c          |   10 +-
>  board/ttcontrol/vision2/imximage_hynix.cfg        |  295 +++++++++--------
>  board/woodburn/imximage.cfg                       |    2 +-
>  board/woodburn/woodburn.c                         |    3 +-
>  boards.cfg                                        |    2 +
>  doc/README.fec_mxc                                |   27 ++
>  drivers/dma/apbh_dma.c                            |   10 +-
>  drivers/mmc/mxsmmc.c                              |  102 +++---
>  drivers/net/fec_mxc.c                             |  164 +++++-----
>  drivers/net/fec_mxc.h                             |    2 +-
>  drivers/net/phy/phy.c                             |  128 +++++---
>  drivers/spi/mxs_spi.c                             |    7 +-
>  include/configs/m28evk.h                          |    3 +-
>  include/configs/mx23_olinuxino.h                  |  210 ++++++++++++
>  include/configs/mx23evk.h                         |  202 ++++++++++++
>  include/configs/mx28evk.h                         |    1 -
>  include/configs/mx6qsabre_common.h                |    2 +-
>  include/configs/mx6qsabreauto.h                   |   12 +
>  include/configs/sc_sps_1.h                        |    1 -
>  include/netdev.h                                  |    7 +
>  include/phy.h                                     |    3 +
>  spl/Makefile                                      |    7 +-
>  tools/Makefile                                    |    2 +
>  tools/imximage.c                                  |    2 +-
>  68 files changed, 3418 insertions(+), 973 deletions(-)
>  create mode 100644 arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd
>  create mode 100644 arch/arm/include/asm/arch-mxs/iomux-mx23.h
>  create mode 100644 arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h
>  create mode 100644 arch/arm/include/asm/arch-mxs/regs-power-mx23.h
>  create mode 100644 board/freescale/mx23evk/Makefile
>  create mode 100644 board/freescale/mx23evk/mx23evk.c
>  create mode 100644 board/freescale/mx23evk/spl_boot.c
>  create mode 100644 board/olimex/mx23_olinuxino/Makefile
>  create mode 100644 board/olimex/mx23_olinuxino/mx23_olinuxino.c
>  create mode 100644 board/olimex/mx23_olinuxino/spl_boot.c
>  create mode 100644 doc/README.fec_mxc
>  create mode 100644 include/configs/mx23_olinuxino.h
>  create mode 100644 include/configs/mx23evk.h
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-01-28 22:25 Stefano Babic
  2013-02-02 22:08 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2013-01-28 22:25 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx (last fixes), thanks.

The following changes since commit 3a9d879f6f64585b819af728b53be0a05037fe0d:

  Prepare v2013.01 (2013-01-15 14:47:42 -0700)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 81ca840976e8e418ae8decaf03ea01f59b1b5be2:

  mx23evk: Add initial board support (2013-01-28 11:51:04 +0100)

----------------------------------------------------------------
Fabio Estevam (4):
      woodburn: Set Write Protection GPIO as input
      mx6qsabre_common: Let mmc partition be board specific
      tools: imximage: Let .name field be more generic
      mxs: Use __weak annotation to simplify code

Knut Wohlrab (1):
      mx6qsabreauto: enable USB host interface

Marek Vasut (14):
      mxs: mmc: Drop unused members from struct mxsmmc_priv
      mxs: ssp: Pull out the SSP bus to regs conversion
      mx23: Add POWER and CLKCTRL register definitions
      mx23: ssp: Fix ssp-regs.h for MX23
      mmc: Limit the number of used SSP ports on MX23
      mxs: Add function to ungate the power block on MX23
      mxs: Linux uses ttyAMA0 as DUART
      mxs: Add MX23 olinuxino board support
      mxs: Boost the memory power supply
      mxs: dma: Fix APBH DMA driver for MX23
      mxs: ssp: Add SSP registers map for MX23
      mxs: mmc: Allow overriding default card detect implementation
      mxs: mmc: Fix the MMC driver for MX23
      mxs: mmc: mx23_olinuxino: Add MMC support

Otavio Salvador (14):
      mxs: clock: Use 'mxs' prefix for methods
      mx23: Add register base addresses
      mx23: Add iomux-mx23.h
      mx23: Add support on print_cpuinfo()
      mx23: Add boot mode description
      mx23: SPL: Add boot mode support
      mx23: SPL: Initialize DDR at 133MHz
      mx23: config: Enable building of u-boot.sb binary
      mx23: config: Enable mxsboot tool for i.MX23 based boards
      mxs: Fix the memory init for MX23
      mxs: Add MX23 quirks into the clock code
      mxs: mmc: Fix MMC reset on iMX23
      mx23_olinuxino: Add default environment
      mx23evk: Add initial board support

Troy Kisky (10):
      imximage.cfg: run files through C preprocessor
      doc/README.fec_mxc: add documentation
      net: fec_mxc: delete CONFIG_FEC_MXC_MULTI
      net: fec_mxc: change fec_mii_setspeed parameter
      net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multi
      phy: add phy_find_by_mask/phy_connect_dev
      net: fec_mxc: use fec_set_dev_name to set name
      net: fec_mxc: only call phy_connect in fec_probe
      net: fec_mxc: get phydev before fec_probe
      mx6qsabrelite: search mii phy address 4-7

 .gitignore                                        |    1 +
 MAINTAINERS                                       |    5 +
 Makefile                                          |    9 +-
 arch/arm/cpu/arm926ejs/config.mk                  |    2 +-
 arch/arm/cpu/arm926ejs/mxs/clock.c                |   83 +++--
 arch/arm/cpu/arm926ejs/mxs/mxs.c                  |   25 +-
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c             |   25 ++
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c         |  118 +++++--
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c       |   12 +
 arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd        |   18 ++
 arch/arm/cpu/armv7/config.mk                      |    2 +-
 arch/arm/imx-common/Makefile                      |   13 +
 arch/arm/include/asm/arch-mxs/clock.h             |   14 +-
 arch/arm/include/asm/arch-mxs/imx-regs.h          |    7 +-
 arch/arm/include/asm/arch-mxs/iomux-mx23.h        |  355
++++++++++++++++++++
 arch/arm/include/asm/arch-mxs/regs-apbh.h         |  121 +++++++
 arch/arm/include/asm/arch-mxs/regs-base.h         |   56 +++-
 arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h |  221 +++++++++++++
 arch/arm/include/asm/arch-mxs/regs-digctl.h       |    1 +
 arch/arm/include/asm/arch-mxs/regs-power-mx23.h   |  358
+++++++++++++++++++++
 arch/arm/include/asm/arch-mxs/regs-ssp.h          |   54 ++++
 arch/arm/include/asm/arch-mxs/sys_proto.h         |   20 +-
 board/bluegiga/apx4devkit/apx4devkit.c            |    8 +-
 board/denx/m28evk/m28evk.c                        |   10 +-
 board/esg/ima3-mx53/imximage.cfg                  |  120 +++----
 board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg      |   90 +++---
 board/freescale/mx23evk/Makefile                  |   47 +++
 board/freescale/mx23evk/mx23evk.c                 |   83 +++++
 board/freescale/mx23evk/spl_boot.c                |  104 ++++++
 board/freescale/mx25pdk/imximage.cfg              |   77 ++---
 board/freescale/mx28evk/mx28evk.c                 |   10 +-
 board/freescale/mx51evk/imximage.cfg              |  114 +++----
 board/freescale/mx53ard/imximage_dd3.cfg          |   83 ++---
 board/freescale/mx53evk/imximage.cfg              |   86 ++---
 board/freescale/mx53loco/imximage.cfg             |   83 ++---
 board/freescale/mx53smd/imximage.cfg              |   83 ++---
 board/freescale/mx6qarm2/imximage.cfg             |   88 ++---
 board/freescale/mx6qsabreauto/imximage.cfg        |   82 ++---
 board/freescale/mx6qsabrelite/mx6qsabrelite.c     |   24 +-
 board/genesi/mx51_efikamx/imximage_mx.cfg         |  132 ++++----
 board/genesi/mx51_efikamx/imximage_sb.cfg         |  126 ++++----
 board/olimex/mx23_olinuxino/Makefile              |   47 +++
 board/olimex/mx23_olinuxino/mx23_olinuxino.c      |   71 ++++
 board/olimex/mx23_olinuxino/spl_boot.c            |   99 ++++++
 board/schulercontrol/sc_sps_1/sc_sps_1.c          |   10 +-
 board/ttcontrol/vision2/imximage_hynix.cfg        |  295 +++++++++--------
 board/woodburn/imximage.cfg                       |    2 +-
 board/woodburn/woodburn.c                         |    3 +-
 boards.cfg                                        |    2 +
 doc/README.fec_mxc                                |   27 ++
 drivers/dma/apbh_dma.c                            |   10 +-
 drivers/mmc/mxsmmc.c                              |  102 +++---
 drivers/net/fec_mxc.c                             |  164 +++++-----
 drivers/net/fec_mxc.h                             |    2 +-
 drivers/net/phy/phy.c                             |  128 +++++---
 drivers/spi/mxs_spi.c                             |    7 +-
 include/configs/m28evk.h                          |    3 +-
 include/configs/mx23_olinuxino.h                  |  210 ++++++++++++
 include/configs/mx23evk.h                         |  202 ++++++++++++
 include/configs/mx28evk.h                         |    1 -
 include/configs/mx6qsabre_common.h                |    2 +-
 include/configs/mx6qsabreauto.h                   |   12 +
 include/configs/sc_sps_1.h                        |    1 -
 include/netdev.h                                  |    7 +
 include/phy.h                                     |    3 +
 spl/Makefile                                      |    7 +-
 tools/Makefile                                    |    2 +
 tools/imximage.c                                  |    2 +-
 68 files changed, 3418 insertions(+), 973 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd
 create mode 100644 arch/arm/include/asm/arch-mxs/iomux-mx23.h
 create mode 100644 arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h
 create mode 100644 arch/arm/include/asm/arch-mxs/regs-power-mx23.h
 create mode 100644 board/freescale/mx23evk/Makefile
 create mode 100644 board/freescale/mx23evk/mx23evk.c
 create mode 100644 board/freescale/mx23evk/spl_boot.c
 create mode 100644 board/olimex/mx23_olinuxino/Makefile
 create mode 100644 board/olimex/mx23_olinuxino/mx23_olinuxino.c
 create mode 100644 board/olimex/mx23_olinuxino/spl_boot.c
 create mode 100644 doc/README.fec_mxc
 create mode 100644 include/configs/mx23_olinuxino.h
 create mode 100644 include/configs/mx23evk.h

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-01-14  8:40 Stefano Babic
@ 2013-01-14 16:54 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2013-01-14 16:54 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Mon, 14 Jan 2013 09:40:23 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx (last fixes), thanks.
> 
> The following changes since commit 7528cf5f016b5b8b8b12b373f6f31a10bf89233d:
> 
>   Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-08
> 14:59:37 +0100)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 11d80af4876b609832856853b63d06a1011bccf1:
> 
>   mx51evk: Add DVI output support (2013-01-13 12:06:35 +0100)
> 
> ----------------------------------------------------------------
> Fabio Estevam (4):
>       mx6: Add workaround for ARM errata
>       mx53loco: Add support for SEIKO 4.3'' WVGA panel
>       mx6qsabresd: Fix booting the kernel from SDHC3
>       mx51evk: Add DVI output support
> 
> Otavio Salvador (6):
>       mx6qsabrelite: Use tabs to environment setting
>       mx28evk: We shouldn't hardcode a rootfs filesystem type
>       mx28evk: Add support to dynamically choose between fdt use or not
>       mx53loco: Add support to dynamically choose between fdt use or not
>       mx6qsabrelite: Add support to dynamically choose between fdt use
> or not
>       mx6qsabre{auto, sd}: Add support to dynamically choose between fdt
> use or not
> 
> Troy Kisky (1):
>       mx31/mx35/mx51/mx53/mx6: add watchdog
> 
>  arch/arm/cpu/arm1136/mx31/timer.c         |   39 -----------
>  arch/arm/cpu/arm1136/mx35/generic.c       |    6 --
>  arch/arm/cpu/armv7/mx6/lowlevel_init.S    |   10 +++
>  arch/arm/imx-common/cpu.c                 |    5 --
>  arch/arm/include/asm/arch-mx31/clock.h    |    2 -
>  arch/arm/include/asm/arch-mx31/imx-regs.h |   13 +---
>  arch/arm/include/asm/arch-mx35/imx-regs.h |   11 +---
>  arch/arm/include/asm/arch-mx5/imx-regs.h  |   10 ---
>  board/davedenx/qong/qong.c                |    9 +--
>  board/freescale/mx31pdk/mx31pdk.c         |    9 +--
>  board/freescale/mx51evk/mx51evk.c         |    2 -
>  board/freescale/mx51evk/mx51evk_video.c   |   39 ++++++++++-
>  board/freescale/mx53loco/mx53loco.c       |    2 -
>  board/freescale/mx53loco/mx53loco_video.c |   38 ++++++++++-
>  board/hale/tt01/tt01.c                    |    2 +-
>  doc/README.watchdog                       |   29 +++++++++
>  drivers/watchdog/Makefile                 |    3 +
>  drivers/watchdog/imx_watchdog.c           |   66 +++++++++++++++++++
>  include/configs/mx28evk.h                 |   47 ++++++++++++--
>  include/configs/mx31pdk.h                 |    1 +
>  include/configs/mx53loco.h                |   44 +++++++++++--
>  include/configs/mx6qsabre_common.h        |   43 ++++++++++--
>  include/configs/mx6qsabreauto.h           |    1 +
>  include/configs/mx6qsabrelite.h           |  101
> +++++++++++++++++++----------
>  include/configs/mx6qsabresd.h             |    3 +-
>  include/configs/qong.h                    |    1 +
>  include/watchdog.h                        |    1 +
>  27 files changed, 377 insertions(+), 160 deletions(-)
>  create mode 100644 doc/README.watchdog
>  create mode 100644 drivers/watchdog/imx_watchdog.c
> 
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-01-14  8:40 Stefano Babic
  2013-01-14 16:54 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2013-01-14  8:40 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx (last fixes), thanks.

The following changes since commit 7528cf5f016b5b8b8b12b373f6f31a10bf89233d:

  Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-08
14:59:37 +0100)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 11d80af4876b609832856853b63d06a1011bccf1:

  mx51evk: Add DVI output support (2013-01-13 12:06:35 +0100)

----------------------------------------------------------------
Fabio Estevam (4):
      mx6: Add workaround for ARM errata
      mx53loco: Add support for SEIKO 4.3'' WVGA panel
      mx6qsabresd: Fix booting the kernel from SDHC3
      mx51evk: Add DVI output support

Otavio Salvador (6):
      mx6qsabrelite: Use tabs to environment setting
      mx28evk: We shouldn't hardcode a rootfs filesystem type
      mx28evk: Add support to dynamically choose between fdt use or not
      mx53loco: Add support to dynamically choose between fdt use or not
      mx6qsabrelite: Add support to dynamically choose between fdt use
or not
      mx6qsabre{auto, sd}: Add support to dynamically choose between fdt
use or not

Troy Kisky (1):
      mx31/mx35/mx51/mx53/mx6: add watchdog

 arch/arm/cpu/arm1136/mx31/timer.c         |   39 -----------
 arch/arm/cpu/arm1136/mx35/generic.c       |    6 --
 arch/arm/cpu/armv7/mx6/lowlevel_init.S    |   10 +++
 arch/arm/imx-common/cpu.c                 |    5 --
 arch/arm/include/asm/arch-mx31/clock.h    |    2 -
 arch/arm/include/asm/arch-mx31/imx-regs.h |   13 +---
 arch/arm/include/asm/arch-mx35/imx-regs.h |   11 +---
 arch/arm/include/asm/arch-mx5/imx-regs.h  |   10 ---
 board/davedenx/qong/qong.c                |    9 +--
 board/freescale/mx31pdk/mx31pdk.c         |    9 +--
 board/freescale/mx51evk/mx51evk.c         |    2 -
 board/freescale/mx51evk/mx51evk_video.c   |   39 ++++++++++-
 board/freescale/mx53loco/mx53loco.c       |    2 -
 board/freescale/mx53loco/mx53loco_video.c |   38 ++++++++++-
 board/hale/tt01/tt01.c                    |    2 +-
 doc/README.watchdog                       |   29 +++++++++
 drivers/watchdog/Makefile                 |    3 +
 drivers/watchdog/imx_watchdog.c           |   66 +++++++++++++++++++
 include/configs/mx28evk.h                 |   47 ++++++++++++--
 include/configs/mx31pdk.h                 |    1 +
 include/configs/mx53loco.h                |   44 +++++++++++--
 include/configs/mx6qsabre_common.h        |   43 ++++++++++--
 include/configs/mx6qsabreauto.h           |    1 +
 include/configs/mx6qsabrelite.h           |  101
+++++++++++++++++++----------
 include/configs/mx6qsabresd.h             |    3 +-
 include/configs/qong.h                    |    1 +
 include/watchdog.h                        |    1 +
 27 files changed, 377 insertions(+), 160 deletions(-)
 create mode 100644 doc/README.watchdog
 create mode 100644 drivers/watchdog/imx_watchdog.c



-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2013-01-05 17:36 Stefano Babic
@ 2013-01-08 14:50 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2013-01-08 14:50 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Sat, 05 Jan 2013 18:36:50 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks.
> 
> The following changes since commit b874df74afc986b069738b180763f2464ac3f5f4:
> 
>   mx25pdk: Allow booting a device tree kernel (2012-12-13 09:23:59 +0100)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 1411fb37b5a8d56bececc5e6ea09d2e0670b9810:
> 
>   tools: imximage: Load a size that is multiple of 512 (2013-01-05
> 18:09:00 +0100)
> 
> ----------------------------------------------------------------
> Ashok (1):
>       mx35pdk:Use IMX_GPIO_NR macro
> 
> Fabio Estevam (6):
>       mx35pdk: Allow booting of a device tree kernel
>       mx53loco: Call PMIC related functions from board_late_init()
>       mx51evk: Remove unneeded comment
>       mx53loco: Remove unneeded 'retval' variable
>       mx53loco: Improve error handling on power_init()
>       tools: imximage: Load a size that is multiple of 512
> 
> Marek Vasut (1):
>       mxs: Add NAND fdt and ramdisk partition to m28evk
> 
> Otavio Salvador (4):
>       mx53loco: We shouldn't hardcode a rootfs filesystem type
>       mx53loco: Change default loadaddr to 0x72000000
>       mx6qsabrelite: Change default loadaddr to 0x12000000
>       mx6qsabre_common: Change default loadaddr to 0x12000000
> 
> Shawn Guo (3):
>       fsl_esdhc: add MMC_MODE_HC host_caps
>       mx6qsabresd: add usdhc2 and usdhc4 support
>       mx6qsabresd: use on-board eMMC to store environment
> 
>  board/freescale/mx35pdk/mx35pdk.c         |    2 +-
>  board/freescale/mx53loco/mx53loco.c       |   84
> ++++++++++++++++++++++-------
>  board/freescale/mx6qsabresd/mx6qsabresd.c |   80
> ++++++++++++++++++++++++---
>  drivers/mmc/fsl_esdhc.c                   |    2 +-
>  include/configs/m28evk.h                  |    2 +
>  include/configs/mx35pdk.h                 |    1 +
>  include/configs/mx51evk.h                 |    4 --
>  include/configs/mx53loco.h                |   10 ++--
>  include/configs/mx6qsabre_common.h        |    4 +-
>  include/configs/mx6qsabreauto.h           |    5 ++
>  include/configs/mx6qsabrelite.h           |    2 +-
>  include/configs/mx6qsabresd.h             |    6 +++
>  include/image.h                           |    3 ++
>  tools/imximage.c                          |    9 +++-
>  14 files changed, 172 insertions(+), 42 deletions(-)
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-01-05 17:36 Stefano Babic
  2013-01-08 14:50 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2013-01-05 17:36 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit b874df74afc986b069738b180763f2464ac3f5f4:

  mx25pdk: Allow booting a device tree kernel (2012-12-13 09:23:59 +0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 1411fb37b5a8d56bececc5e6ea09d2e0670b9810:

  tools: imximage: Load a size that is multiple of 512 (2013-01-05
18:09:00 +0100)

----------------------------------------------------------------
Ashok (1):
      mx35pdk:Use IMX_GPIO_NR macro

Fabio Estevam (6):
      mx35pdk: Allow booting of a device tree kernel
      mx53loco: Call PMIC related functions from board_late_init()
      mx51evk: Remove unneeded comment
      mx53loco: Remove unneeded 'retval' variable
      mx53loco: Improve error handling on power_init()
      tools: imximage: Load a size that is multiple of 512

Marek Vasut (1):
      mxs: Add NAND fdt and ramdisk partition to m28evk

Otavio Salvador (4):
      mx53loco: We shouldn't hardcode a rootfs filesystem type
      mx53loco: Change default loadaddr to 0x72000000
      mx6qsabrelite: Change default loadaddr to 0x12000000
      mx6qsabre_common: Change default loadaddr to 0x12000000

Shawn Guo (3):
      fsl_esdhc: add MMC_MODE_HC host_caps
      mx6qsabresd: add usdhc2 and usdhc4 support
      mx6qsabresd: use on-board eMMC to store environment

 board/freescale/mx35pdk/mx35pdk.c         |    2 +-
 board/freescale/mx53loco/mx53loco.c       |   84
++++++++++++++++++++++-------
 board/freescale/mx6qsabresd/mx6qsabresd.c |   80
++++++++++++++++++++++++---
 drivers/mmc/fsl_esdhc.c                   |    2 +-
 include/configs/m28evk.h                  |    2 +
 include/configs/mx35pdk.h                 |    1 +
 include/configs/mx51evk.h                 |    4 --
 include/configs/mx53loco.h                |   10 ++--
 include/configs/mx6qsabre_common.h        |    4 +-
 include/configs/mx6qsabreauto.h           |    5 ++
 include/configs/mx6qsabrelite.h           |    2 +-
 include/configs/mx6qsabresd.h             |    6 +++
 include/image.h                           |    3 ++
 tools/imximage.c                          |    9 +++-
 14 files changed, 172 insertions(+), 42 deletions(-)

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2012-12-21 21:35       ` stefano babic
@ 2012-12-23 16:47         ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2012-12-23 16:47 UTC (permalink / raw)
  To: u-boot

Hi stefano,

On Fri, 21 Dec 2012 22:35:32 +0100, stefano babic <sbabic@denx.de>
wrote:
> Am 21/12/2012 21:46, schrieb Albert ARIBAUD:
> > Hi Stefano,
> > 
> 
> Hi Albert,
> 
> > Hmm, your request says master but the 'up to' points to 'master merge'.
> > As master has a few more commits including changes to woodburn boards
> > that makes them use the new power interface, I guess I should ignore
> > the 'up to' and simply use master (b874df74...)?
> 
> Yes, please use master (b874df74af..), thanks.
> 
> Stefano

Applied, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2012-12-21 20:46     ` Albert ARIBAUD
@ 2012-12-21 21:35       ` stefano babic
  2012-12-23 16:47         ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: stefano babic @ 2012-12-21 21:35 UTC (permalink / raw)
  To: u-boot

Am 21/12/2012 21:46, schrieb Albert ARIBAUD:
> Hi Stefano,
> 

Hi Albert,

> Hmm, your request says master but the 'up to' points to 'master merge'.
> As master has a few more commits including changes to woodburn boards
> that makes them use the new power interface, I guess I should ignore
> the 'up to' and simply use master (b874df74...)?

Yes, please use master (b874df74af..), thanks.

Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2012-12-08 14:16   ` Stefano Babic
@ 2012-12-21 20:46     ` Albert ARIBAUD
  2012-12-21 21:35       ` stefano babic
  0 siblings, 1 reply; 307+ messages in thread
From: Albert ARIBAUD @ 2012-12-21 20:46 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Sat, 08 Dec 2012 15:16:39 +0100, Stefano Babic <sbabic@denx.de>
wrote:
> Hi Albert,
> 
> please pull from u-boot-imx, master. Conflicts are fixed, request pull
> is generated from u-boot/master, as I merged it (so you see also the
> commits you have already merged into u-boot-arm from my previous pull
> request):
> 
> The following changes since commit fd4d564b3c80b111f18c93adb14233a6a7ddb0e9:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07
> 08:47:59 -0700)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 05a860c228fe6c8f2e7aced8cc8ef88bc1038363:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot into master
> (2012-12-08 12:02:45 +0100)

Hmm, your request says master but the 'up to' points to 'master merge'.
As master has a few more commits including changes to woodburn boards
that makes them use the new power interface, I guess I should ignore
the 'up to' and simply use master (b874df74...)?

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2012-12-08  9:34 ` Albert ARIBAUD
@ 2012-12-08 14:16   ` Stefano Babic
  2012-12-21 20:46     ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2012-12-08 14:16 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, master. Conflicts are fixed, request pull
is generated from u-boot/master, as I merged it (so you see also the
commits you have already merged into u-boot-arm from my previous pull
request):

The following changes since commit fd4d564b3c80b111f18c93adb14233a6a7ddb0e9:

  Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07
08:47:59 -0700)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 05a860c228fe6c8f2e7aced8cc8ef88bc1038363:

  Merge branch 'master' of git://git.denx.de/u-boot into master
(2012-12-08 12:02:45 +0100)

----------------------------------------------------------------

Beno?t Th?baudeau (16):
      mx31: Move EHCI definitions to ehci-fsl.h
      ehci-mxc: Clean up
      ehci-mx5: Clean up
      ehci-mx5: Fix OC_DIS usage
      ehci-mx5: Fix OPM usage
      ehci-mx5: Fix *PM usage for i.MX53
      ehci-mx5: Add missing OC_DIS for i.MX53
      ehci-mxc: Make EHCI power/oc polarities configurable
      ehci-mxc: Make i.MX25 EHCI configurable
      ehci-mxc: Define host offsets
      ehci-mxc: Add support for i.MX35
      mx35pdk: Add support for OTG
      ehci-mx5/6: Make board_ehci_hcd_init() optional
      ehci-mxc: Fix host power mask bit for i.MX35
      ehci-mxc: Fix host power mask bit for i.MX25
      mx5: Mark lowlevel_init board-specific code

Fabio Estevam (24):
      mx25pdk: Include CONFIG_MX25
      mx25pdk: Add esdhc support
      pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH
      mx25: Place common functions into sys_proto.h
      pmic: Add support for mc34704
      mx25pdk: Add Ethernet support
      mx53loco: Allow booting a zImage kernel
      mx25pdk: Allow booting a zImage kernel
      mx51evk: Allow booting a zImage kernel
      mx35pdk: Allow booting a zImage kernel
      mx6qsabre_common: Allow booting a zImage kernel
      mx5: Align SPI CS naming with i.MX53 reference manual
      mx5: Print CSPI clock in 'clock' command
      spi: mxc_spi: Fix handling of chip select
      spi: mxc_spi: Fix spi clock glitch durant reset
      mx6: clock: Only show CSPI clock if CSPI is enabled
      mx28evk: Configure CONFIG_BOOTDELAY to one second
      mx53loco: Configure CONFIG_BOOTDELAY to one second
      mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second
      mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second
      mx51evk: Configure CONFIG_BOOTDELAY to one second
      mx25pdk: Configure CONFIG_BOOTDELAY to one second
      mx31pdk: Configure CONFIG_BOOTDELAY to one second
      mx35pdk: Configure CONFIG_BOOTDELAY to one second

Marek Vasut (8):
      mx28: Fix typo in POWER_MINPWR_VBG_OFF
      mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET
      mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registers
      mx28: Rename regs-power.h to regs-power-mx28.h
      mxs: Silence elftosb
      mxs: Implement common function to setup VDDx
      mxs: Properly setup VDDD in power supply setup code
      mxs: Staticize SPL functions

Otavio Salvador (1):
      mxs: SPL: Generalize memory initialization

Stefano Babic (9):
      ARM: Fix start.S when used with SPL in arm1136
      MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK
      MX35: Add soc_boot_mode and soc_boot_device to MX35
      SPL: Added SPL target for mx35 SOC to SPL Makefile
      ARM: Add SPL target to arm1136
      MX35: add support for woodburn board
      MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk
      Merge git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot into master

Troy Kisky (4):
      mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite
      mx6: use CONFIG_MX6 instead of CONFIG_MX6Q
      imx-common: cpu: add imx_ddr_size
      arch-mx6: add mx6dl_pins.h

 MAINTAINERS                                        |    1 +
 Makefile                                           |    3 +-
 arch/arm/cpu/arm1136/config.mk                     |    3 +
 arch/arm/cpu/arm1136/mx35/Makefile                 |    1 +
 arch/arm/cpu/arm1136/mx35/generic.c                |   75 +++++
 arch/arm/cpu/arm1136/mx35/mx35_sdram.c             |  137 +++++++++
 arch/arm/cpu/arm1136/start.S                       |   31 +-
 arch/arm/cpu/arm1136/u-boot-spl.lds                |   62 ++++
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c              |    4 +-
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c          |   38 +--
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c        |  305
+++++++------------
 arch/arm/cpu/armv7/mx5/clock.c                     |    4 +-
 arch/arm/cpu/armv7/mx5/lowlevel_init.S             |    2 +-
 arch/arm/cpu/armv7/mx6/clock.c                     |    2 +
 arch/arm/cpu/armv7/mx6/soc.c                       |   32 +-
 arch/arm/imx-common/cpu.c                          |   66 ++++-
 arch/arm/include/asm/arch-mx25/imx-regs.h          |    5 +-
 arch/arm/include/asm/arch-mx25/sys_proto.h         |    3 +
 arch/arm/include/asm/arch-mx31/imx-regs.h          |   27 +-
 arch/arm/include/asm/arch-mx35/imx-regs.h          |    4 +
 arch/arm/include/asm/arch-mx35/mmc_host_def.h      |   31 ++
 arch/arm/include/asm/arch-mx35/spl.h               |   38 +++
 arch/arm/include/asm/arch-mx5/mx5x_pins.h          |    6 +-
 arch/arm/include/asm/arch-mx5/sys_proto.h          |   10 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h           |    2 +
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h         |  149 ++++++++++
 arch/arm/include/asm/arch-mx6/sys_proto.h          |   10 +-
 arch/arm/include/asm/arch-mxs/imx-regs.h           |    7 +-
 arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h  |    6 +-
 .../arch-mxs/{regs-power.h => regs-power-mx28.h}   |    4 +-
 board/freescale/mx25pdk/mx25pdk.c                  |  114 +++++++
 board/freescale/mx31ads/u-boot.lds                 |    2 +
 board/freescale/mx35pdk/lowlevel_init.S            |    4 +
 board/freescale/mx35pdk/mx35pdk.c                  |   21 ++
 board/syteco/zmx25/zmx25.c                         |    1 +
 board/woodburn/Makefile                            |   43 +++
 board/woodburn/imximage.cfg                        |    4 +
 board/woodburn/lowlevel_init.S                     |   38 +++
 board/woodburn/woodburn.c                          |  265 +++++++++++++++++
 boards.cfg                                         |    2 +
 doc/README.imx5                                    |    5 +
 drivers/gpio/mxc_gpio.c                            |    6 +-
 drivers/power/power_fsl.c                          |    8 +-
 drivers/spi/mxc_spi.c                              |    9 +-
 drivers/usb/host/ehci-mx5.c                        |  146 +++++++--
 drivers/usb/host/ehci-mx6.c                        |    5 +
 drivers/usb/host/ehci-mxc.c                        |  225 ++++++++++----
 drivers/video/ipu_regs.h                           |    2 +-
 include/configs/mx25pdk.h                          |   42 ++-
 include/configs/mx28evk.h                          |    2 +-
 include/configs/mx31pdk.h                          |    2 +-
 include/configs/mx35pdk.h                          |   18 +-
 include/configs/mx51_efikamx.h                     |    1 +
 include/configs/mx51evk.h                          |    5 +-
 include/configs/mx53evk.h                          |    1 +
 include/configs/mx53loco.h                         |    4 +-
 include/configs/mx6qarm2.h                         |    1 +
 include/configs/mx6qsabre_common.h                 |    4 +-
 include/configs/mx6qsabrelite.h                    |    3 +-
 include/configs/vision2.h                          |    1 +
 include/configs/woodburn.h                         |   34 +++
 include/configs/woodburn_common.h                  |  313
++++++++++++++++++++
 include/configs/woodburn_sd.h                      |   60 ++++
 include/configs/zmx25.h                            |    6 +-
 include/mc34704.h                                  |   49 +++
 include/usb/ehci-fsl.h                             |   28 +-
 nand_spl/board/freescale/mx31pdk/u-boot.lds        |    2 +
 spl/Makefile                                       |    6 +
 69 files changed, 2159 insertions(+), 393 deletions(-)
 create mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c
 create mode 100644 arch/arm/cpu/arm1136/u-boot-spl.lds
 create mode 100644 arch/arm/include/asm/arch-mx35/mmc_host_def.h
 create mode 100644 arch/arm/include/asm/arch-mx35/spl.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl_pins.h
 rename arch/arm/include/asm/arch-mxs/{regs-power.h =>
regs-power-mx28.h} (99%)
 create mode 100644 board/woodburn/Makefile
 create mode 100644 board/woodburn/imximage.cfg
 create mode 100644 board/woodburn/lowlevel_init.S
 create mode 100644 board/woodburn/woodburn.c
 create mode 100644 include/configs/woodburn.h
 create mode 100644 include/configs/woodburn_common.h
 create mode 100644 include/configs/woodburn_sd.h
 create mode 100644 include/mc34704.h

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2012-12-07 17:07 Stefano Babic
@ 2012-12-08  9:34 ` Albert ARIBAUD
  2012-12-08 14:16   ` Stefano Babic
  0 siblings, 1 reply; 307+ messages in thread
From: Albert ARIBAUD @ 2012-12-08  9:34 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Fri, 07 Dec 2012 18:07:59 +0100, Stefano Babic <sbabic@denx.de>
wrote:
> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 1d4fd0dc3b45de7b7a706285845ef5b527422014:
> 
>   mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET (2012-11-24 16:21:37
> +0100)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 393ff47ba3123208f7c4f08d63f114300a41d0c4:
> 
>   mxs: SPL: Generalize memory initialization (2012-12-07 14:50:02 +0100)
> 
> ----------------------------------------------------------------
> Marek Vasut (6):
>       mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registers
>       mx28: Rename regs-power.h to regs-power-mx28.h
>       mxs: Silence elftosb
>       mxs: Implement common function to setup VDDx
>       mxs: Properly setup VDDD in power supply setup code
>       mxs: Staticize SPL functions
> 
> Otavio Salvador (1):
>       mxs: SPL: Generalize memory initialization
> 
>  Makefile                                           |    2 +-
>  arch/arm/cpu/arm926ejs/mxs/spl_boot.c              |    4 +-
>  arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c          |   38 +--
>  arch/arm/cpu/arm926ejs/mxs/spl_power_init.c        |  305
> +++++++-------------
>  arch/arm/include/asm/arch-mxs/imx-regs.h           |    7 +-
>  arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h  |    6 +-
>  .../arch-mxs/{regs-power.h => regs-power-mx28.h}   |    0
>  7 files changed, 137 insertions(+), 225 deletions(-)
>  rename arch/arm/include/asm/arch-mxs/{regs-power.h =>
> regs-power-mx28.h} (100%)

Hi Stefano,

I just posted to you about the woodburn board which seems not to build
properly if I merge u-boot/master into u-boot-arm/master. Can you
please look into this and provide an updated pull request? Or do you
prefer me to take this one in and that you send another pull req for
woodburn fixes?

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2012-12-07 17:07 Stefano Babic
  2012-12-08  9:34 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2012-12-07 17:07 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks !

The following changes since commit 1d4fd0dc3b45de7b7a706285845ef5b527422014:

  mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET (2012-11-24 16:21:37
+0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 393ff47ba3123208f7c4f08d63f114300a41d0c4:

  mxs: SPL: Generalize memory initialization (2012-12-07 14:50:02 +0100)

----------------------------------------------------------------
Marek Vasut (6):
      mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registers
      mx28: Rename regs-power.h to regs-power-mx28.h
      mxs: Silence elftosb
      mxs: Implement common function to setup VDDx
      mxs: Properly setup VDDD in power supply setup code
      mxs: Staticize SPL functions

Otavio Salvador (1):
      mxs: SPL: Generalize memory initialization

 Makefile                                           |    2 +-
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c              |    4 +-
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c          |   38 +--
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c        |  305
+++++++-------------
 arch/arm/include/asm/arch-mxs/imx-regs.h           |    7 +-
 arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h  |    6 +-
 .../arch-mxs/{regs-power.h => regs-power-mx28.h}   |    0
 7 files changed, 137 insertions(+), 225 deletions(-)
 rename arch/arm/include/asm/arch-mxs/{regs-power.h =>
regs-power-mx28.h} (100%)


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2012-11-24 15:29 Stefano Babic
@ 2012-11-25 18:49 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2012-11-25 18:49 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Sat, 24 Nov 2012 16:29:03 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks.
> 
> The following changes since commit 34275d70fec6cc369a931090ebb686bc213bb80d:
> 
>   arch-mx6: add mx6dl_pins.h (2012-11-10 08:15:40 +0100)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 1d4fd0dc3b45de7b7a706285845ef5b527422014:
> 
>   mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET (2012-11-24 16:21:37
> +0100)
> 
> ----------------------------------------------------------------
> Beno?t Th?baudeau (16):
>       mx31: Move EHCI definitions to ehci-fsl.h
>       ehci-mxc: Clean up
>       ehci-mx5: Clean up
>       ehci-mx5: Fix OC_DIS usage
>       ehci-mx5: Fix OPM usage
>       ehci-mx5: Fix *PM usage for i.MX53
>       ehci-mx5: Add missing OC_DIS for i.MX53
>       ehci-mxc: Make EHCI power/oc polarities configurable
>       ehci-mxc: Make i.MX25 EHCI configurable
>       ehci-mxc: Define host offsets
>       ehci-mxc: Add support for i.MX35
>       mx35pdk: Add support for OTG
>       ehci-mx5/6: Make board_ehci_hcd_init() optional
>       ehci-mxc: Fix host power mask bit for i.MX35
>       ehci-mxc: Fix host power mask bit for i.MX25
>       mx5: Mark lowlevel_init board-specific code
> 
> Fabio Estevam (13):
>       mx5: Align SPI CS naming with i.MX53 reference manual
>       mx5: Print CSPI clock in 'clock' command
>       spi: mxc_spi: Fix handling of chip select
>       spi: mxc_spi: Fix spi clock glitch durant reset
>       mx6: clock: Only show CSPI clock if CSPI is enabled
>       mx28evk: Configure CONFIG_BOOTDELAY to one second
>       mx53loco: Configure CONFIG_BOOTDELAY to one second
>       mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second
>       mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second
>       mx51evk: Configure CONFIG_BOOTDELAY to one second
>       mx25pdk: Configure CONFIG_BOOTDELAY to one second
>       mx31pdk: Configure CONFIG_BOOTDELAY to one second
>       mx35pdk: Configure CONFIG_BOOTDELAY to one second
> 
> Marek Vasut (2):
>       mx28: Fix typo in POWER_MINPWR_VBG_OFF
>       mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET
> 
>  arch/arm/cpu/armv7/mx5/clock.c             |    4 +-
>  arch/arm/cpu/armv7/mx5/lowlevel_init.S     |    2 +-
>  arch/arm/cpu/armv7/mx6/clock.c             |    2 +
>  arch/arm/include/asm/arch-mx25/imx-regs.h  |    1 +
>  arch/arm/include/asm/arch-mx31/imx-regs.h  |   27 +---
>  arch/arm/include/asm/arch-mx35/imx-regs.h  |    2 +
>  arch/arm/include/asm/arch-mx5/mx5x_pins.h  |    6 +-
>  arch/arm/include/asm/arch-mxs/regs-power.h |    4 +-
>  board/freescale/mx35pdk/lowlevel_init.S    |    4 +
>  board/freescale/mx35pdk/mx35pdk.c          |   21 +++
>  doc/README.imx5                            |    5 +
>  drivers/spi/mxc_spi.c                      |    9 +-
>  drivers/usb/host/ehci-mx5.c                |  146 ++++++++++++++----
>  drivers/usb/host/ehci-mx6.c                |    5 +
>  drivers/usb/host/ehci-mxc.c                |  225
> +++++++++++++++++++++-------
>  include/configs/mx25pdk.h                  |    2 +-
>  include/configs/mx28evk.h                  |    2 +-
>  include/configs/mx31pdk.h                  |    2 +-
>  include/configs/mx35pdk.h                  |   16 +-
>  include/configs/mx51_efikamx.h             |    1 +
>  include/configs/mx51evk.h                  |    3 +-
>  include/configs/mx53loco.h                 |    2 +-
>  include/configs/mx6qsabre_common.h         |    2 +-
>  include/configs/mx6qsabrelite.h            |    2 +-
>  include/configs/vision2.h                  |    1 +
>  include/configs/zmx25.h                    |    6 +-
>  include/usb/ehci-fsl.h                     |   28 +++-
>  27 files changed, 401 insertions(+), 129 deletions(-)
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2012-11-24 15:29 Stefano Babic
  2012-11-25 18:49 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2012-11-24 15:29 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit 34275d70fec6cc369a931090ebb686bc213bb80d:

  arch-mx6: add mx6dl_pins.h (2012-11-10 08:15:40 +0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 1d4fd0dc3b45de7b7a706285845ef5b527422014:

  mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET (2012-11-24 16:21:37
+0100)

----------------------------------------------------------------
Beno?t Th?baudeau (16):
      mx31: Move EHCI definitions to ehci-fsl.h
      ehci-mxc: Clean up
      ehci-mx5: Clean up
      ehci-mx5: Fix OC_DIS usage
      ehci-mx5: Fix OPM usage
      ehci-mx5: Fix *PM usage for i.MX53
      ehci-mx5: Add missing OC_DIS for i.MX53
      ehci-mxc: Make EHCI power/oc polarities configurable
      ehci-mxc: Make i.MX25 EHCI configurable
      ehci-mxc: Define host offsets
      ehci-mxc: Add support for i.MX35
      mx35pdk: Add support for OTG
      ehci-mx5/6: Make board_ehci_hcd_init() optional
      ehci-mxc: Fix host power mask bit for i.MX35
      ehci-mxc: Fix host power mask bit for i.MX25
      mx5: Mark lowlevel_init board-specific code

Fabio Estevam (13):
      mx5: Align SPI CS naming with i.MX53 reference manual
      mx5: Print CSPI clock in 'clock' command
      spi: mxc_spi: Fix handling of chip select
      spi: mxc_spi: Fix spi clock glitch durant reset
      mx6: clock: Only show CSPI clock if CSPI is enabled
      mx28evk: Configure CONFIG_BOOTDELAY to one second
      mx53loco: Configure CONFIG_BOOTDELAY to one second
      mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second
      mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second
      mx51evk: Configure CONFIG_BOOTDELAY to one second
      mx25pdk: Configure CONFIG_BOOTDELAY to one second
      mx31pdk: Configure CONFIG_BOOTDELAY to one second
      mx35pdk: Configure CONFIG_BOOTDELAY to one second

Marek Vasut (2):
      mx28: Fix typo in POWER_MINPWR_VBG_OFF
      mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET

 arch/arm/cpu/armv7/mx5/clock.c             |    4 +-
 arch/arm/cpu/armv7/mx5/lowlevel_init.S     |    2 +-
 arch/arm/cpu/armv7/mx6/clock.c             |    2 +
 arch/arm/include/asm/arch-mx25/imx-regs.h  |    1 +
 arch/arm/include/asm/arch-mx31/imx-regs.h  |   27 +---
 arch/arm/include/asm/arch-mx35/imx-regs.h  |    2 +
 arch/arm/include/asm/arch-mx5/mx5x_pins.h  |    6 +-
 arch/arm/include/asm/arch-mxs/regs-power.h |    4 +-
 board/freescale/mx35pdk/lowlevel_init.S    |    4 +
 board/freescale/mx35pdk/mx35pdk.c          |   21 +++
 doc/README.imx5                            |    5 +
 drivers/spi/mxc_spi.c                      |    9 +-
 drivers/usb/host/ehci-mx5.c                |  146 ++++++++++++++----
 drivers/usb/host/ehci-mx6.c                |    5 +
 drivers/usb/host/ehci-mxc.c                |  225
+++++++++++++++++++++-------
 include/configs/mx25pdk.h                  |    2 +-
 include/configs/mx28evk.h                  |    2 +-
 include/configs/mx31pdk.h                  |    2 +-
 include/configs/mx35pdk.h                  |   16 +-
 include/configs/mx51_efikamx.h             |    1 +
 include/configs/mx51evk.h                  |    3 +-
 include/configs/mx53loco.h                 |    2 +-
 include/configs/mx6qsabre_common.h         |    2 +-
 include/configs/mx6qsabrelite.h            |    2 +-
 include/configs/vision2.h                  |    1 +
 include/configs/zmx25.h                    |    6 +-
 include/usb/ehci-fsl.h                     |   28 +++-
 27 files changed, 401 insertions(+), 129 deletions(-)

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2012-11-10  7:55 Stefano Babic
@ 2012-11-10  8:34 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2012-11-10  8:34 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Sat, 10 Nov 2012 08:55:03 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks.
> 
> The following changes since commit 59852d03867108217fe88e3bfc3e1e9cedfe63c5:
> 
>   Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze
> (2012-11-09 08:47:25 -0700)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 34275d70fec6cc369a931090ebb686bc213bb80d:
> 
>   arch-mx6: add mx6dl_pins.h (2012-11-10 08:15:40 +0100)
> 
> ----------------------------------------------------------------
> Fabio Estevam (11):
>       mx25pdk: Include CONFIG_MX25
>       mx25pdk: Add esdhc support
>       pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH
>       mx25: Place common functions into sys_proto.h
>       pmic: Add support for mc34704
>       mx25pdk: Add Ethernet support
>       mx53loco: Allow booting a zImage kernel
>       mx25pdk: Allow booting a zImage kernel
>       mx51evk: Allow booting a zImage kernel
>       mx35pdk: Allow booting a zImage kernel
>       mx6qsabre_common: Allow booting a zImage kernel
> 
> Stefano Babic (8):
>       ARM: Fix start.S when used with SPL in arm1136
>       MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK
>       MX35: Add soc_boot_mode and soc_boot_device to MX35
>       SPL: Added SPL target for mx35 SOC to SPL Makefile
>       ARM: Add SPL target to arm1136
>       MX35: add support for woodburn board
>       MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk
>       Merge git://git.denx.de/u-boot
> 
> Troy Kisky (4):
>       mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite
>       mx6: use CONFIG_MX6 instead of CONFIG_MX6Q
>       imx-common: cpu: add imx_ddr_size
>       arch-mx6: add mx6dl_pins.h
> 
>  MAINTAINERS                                   |    1 +
>  Makefile                                      |    1 +
>  arch/arm/cpu/arm1136/config.mk                |    3 +
>  arch/arm/cpu/arm1136/mx35/Makefile            |    1 +
>  arch/arm/cpu/arm1136/mx35/generic.c           |   75 ++++++
>  arch/arm/cpu/arm1136/mx35/mx35_sdram.c        |  137 +++++++++++
>  arch/arm/cpu/arm1136/start.S                  |   31 ++-
>  arch/arm/cpu/arm1136/u-boot-spl.lds           |   62 +++++
>  arch/arm/cpu/armv7/mx6/soc.c                  |   32 ++-
>  arch/arm/imx-common/cpu.c                     |   66 +++++-
>  arch/arm/include/asm/arch-mx25/imx-regs.h     |    4 -
>  arch/arm/include/asm/arch-mx25/sys_proto.h    |    3 +
>  arch/arm/include/asm/arch-mx35/imx-regs.h     |    2 +
>  arch/arm/include/asm/arch-mx35/mmc_host_def.h |   31 +++
>  arch/arm/include/asm/arch-mx35/spl.h          |   38 +++
>  arch/arm/include/asm/arch-mx35/sys_proto.h    |    2 +
>  arch/arm/include/asm/arch-mx5/sys_proto.h     |   10 +-
>  arch/arm/include/asm/arch-mx6/imx-regs.h      |    2 +
>  arch/arm/include/asm/arch-mx6/mx6dl_pins.h    |  149 ++++++++++++
>  arch/arm/include/asm/arch-mx6/sys_proto.h     |   10 +-
>  board/freescale/mx25pdk/mx25pdk.c             |  114 +++++++++
>  board/freescale/mx31ads/u-boot.lds            |    2 +
>  board/syteco/zmx25/zmx25.c                    |    1 +
>  board/woodburn/Makefile                       |   43 ++++
>  board/woodburn/imximage.cfg                   |    4 +
>  board/woodburn/lowlevel_init.S                |   38 +++
>  board/woodburn/woodburn.c                     |  261 +++++++++++++++++++++
>  boards.cfg                                    |    2 +
>  drivers/gpio/mxc_gpio.c                       |    6 +-
>  drivers/misc/pmic_fsl.c                       |    8 +-
>  drivers/video/ipu_regs.h                      |    2 +-
>  include/configs/mx25pdk.h                     |   40 +++-
>  include/configs/mx35pdk.h                     |    2 +
>  include/configs/mx51evk.h                     |    2 +-
>  include/configs/mx53evk.h                     |    1 +
>  include/configs/mx53loco.h                    |    2 +
>  include/configs/mx6qarm2.h                    |    1 +
>  include/configs/mx6qsabre_common.h            |    2 +
>  include/configs/mx6qsabrelite.h               |    1 +
>  include/configs/woodburn.h                    |   34 +++
>  include/configs/woodburn_common.h             |  313
> +++++++++++++++++++++++++
>  include/configs/woodburn_sd.h                 |   60 +++++
>  include/mc34704.h                             |   49 ++++
>  nand_spl/board/freescale/mx31pdk/u-boot.lds   |    2 +
>  spl/Makefile                                  |    6 +
>  45 files changed, 1617 insertions(+), 39 deletions(-)
>  create mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c
>  create mode 100644 arch/arm/cpu/arm1136/u-boot-spl.lds
>  create mode 100644 arch/arm/include/asm/arch-mx35/mmc_host_def.h
>  create mode 100644 arch/arm/include/asm/arch-mx35/spl.h
>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl_pins.h
>  create mode 100644 board/woodburn/Makefile
>  create mode 100644 board/woodburn/imximage.cfg
>  create mode 100644 board/woodburn/lowlevel_init.S
>  create mode 100644 board/woodburn/woodburn.c
>  create mode 100644 include/configs/woodburn.h
>  create mode 100644 include/configs/woodburn_common.h
>  create mode 100644 include/configs/woodburn_sd.h
>  create mode 100644 include/mc34704.h
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2012-11-10  7:55 Stefano Babic
  2012-11-10  8:34 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2012-11-10  7:55 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit 59852d03867108217fe88e3bfc3e1e9cedfe63c5:

  Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze
(2012-11-09 08:47:25 -0700)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 34275d70fec6cc369a931090ebb686bc213bb80d:

  arch-mx6: add mx6dl_pins.h (2012-11-10 08:15:40 +0100)

----------------------------------------------------------------
Fabio Estevam (11):
      mx25pdk: Include CONFIG_MX25
      mx25pdk: Add esdhc support
      pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH
      mx25: Place common functions into sys_proto.h
      pmic: Add support for mc34704
      mx25pdk: Add Ethernet support
      mx53loco: Allow booting a zImage kernel
      mx25pdk: Allow booting a zImage kernel
      mx51evk: Allow booting a zImage kernel
      mx35pdk: Allow booting a zImage kernel
      mx6qsabre_common: Allow booting a zImage kernel

Stefano Babic (8):
      ARM: Fix start.S when used with SPL in arm1136
      MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK
      MX35: Add soc_boot_mode and soc_boot_device to MX35
      SPL: Added SPL target for mx35 SOC to SPL Makefile
      ARM: Add SPL target to arm1136
      MX35: add support for woodburn board
      MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk
      Merge git://git.denx.de/u-boot

Troy Kisky (4):
      mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite
      mx6: use CONFIG_MX6 instead of CONFIG_MX6Q
      imx-common: cpu: add imx_ddr_size
      arch-mx6: add mx6dl_pins.h

 MAINTAINERS                                   |    1 +
 Makefile                                      |    1 +
 arch/arm/cpu/arm1136/config.mk                |    3 +
 arch/arm/cpu/arm1136/mx35/Makefile            |    1 +
 arch/arm/cpu/arm1136/mx35/generic.c           |   75 ++++++
 arch/arm/cpu/arm1136/mx35/mx35_sdram.c        |  137 +++++++++++
 arch/arm/cpu/arm1136/start.S                  |   31 ++-
 arch/arm/cpu/arm1136/u-boot-spl.lds           |   62 +++++
 arch/arm/cpu/armv7/mx6/soc.c                  |   32 ++-
 arch/arm/imx-common/cpu.c                     |   66 +++++-
 arch/arm/include/asm/arch-mx25/imx-regs.h     |    4 -
 arch/arm/include/asm/arch-mx25/sys_proto.h    |    3 +
 arch/arm/include/asm/arch-mx35/imx-regs.h     |    2 +
 arch/arm/include/asm/arch-mx35/mmc_host_def.h |   31 +++
 arch/arm/include/asm/arch-mx35/spl.h          |   38 +++
 arch/arm/include/asm/arch-mx35/sys_proto.h    |    2 +
 arch/arm/include/asm/arch-mx5/sys_proto.h     |   10 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h      |    2 +
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h    |  149 ++++++++++++
 arch/arm/include/asm/arch-mx6/sys_proto.h     |   10 +-
 board/freescale/mx25pdk/mx25pdk.c             |  114 +++++++++
 board/freescale/mx31ads/u-boot.lds            |    2 +
 board/syteco/zmx25/zmx25.c                    |    1 +
 board/woodburn/Makefile                       |   43 ++++
 board/woodburn/imximage.cfg                   |    4 +
 board/woodburn/lowlevel_init.S                |   38 +++
 board/woodburn/woodburn.c                     |  261 +++++++++++++++++++++
 boards.cfg                                    |    2 +
 drivers/gpio/mxc_gpio.c                       |    6 +-
 drivers/misc/pmic_fsl.c                       |    8 +-
 drivers/video/ipu_regs.h                      |    2 +-
 include/configs/mx25pdk.h                     |   40 +++-
 include/configs/mx35pdk.h                     |    2 +
 include/configs/mx51evk.h                     |    2 +-
 include/configs/mx53evk.h                     |    1 +
 include/configs/mx53loco.h                    |    2 +
 include/configs/mx6qarm2.h                    |    1 +
 include/configs/mx6qsabre_common.h            |    2 +
 include/configs/mx6qsabrelite.h               |    1 +
 include/configs/woodburn.h                    |   34 +++
 include/configs/woodburn_common.h             |  313
+++++++++++++++++++++++++
 include/configs/woodburn_sd.h                 |   60 +++++
 include/mc34704.h                             |   49 ++++
 nand_spl/board/freescale/mx31pdk/u-boot.lds   |    2 +
 spl/Makefile                                  |    6 +
 45 files changed, 1617 insertions(+), 39 deletions(-)
 create mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c
 create mode 100644 arch/arm/cpu/arm1136/u-boot-spl.lds
 create mode 100644 arch/arm/include/asm/arch-mx35/mmc_host_def.h
 create mode 100644 arch/arm/include/asm/arch-mx35/spl.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl_pins.h
 create mode 100644 board/woodburn/Makefile
 create mode 100644 board/woodburn/imximage.cfg
 create mode 100644 board/woodburn/lowlevel_init.S
 create mode 100644 board/woodburn/woodburn.c
 create mode 100644 include/configs/woodburn.h
 create mode 100644 include/configs/woodburn_common.h
 create mode 100644 include/configs/woodburn_sd.h
 create mode 100644 include/mc34704.h

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
  2012-10-26 14:30 Stefano Babic
@ 2012-10-27 11:56 ` Albert ARIBAUD
  0 siblings, 0 replies; 307+ messages in thread
From: Albert ARIBAUD @ 2012-10-27 11:56 UTC (permalink / raw)
  To: u-boot

Hi Stefano,

On Fri, 26 Oct 2012 16:30:53 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks.
> 
> The following changes since commit bd23b22badadcdc414a900828253961fc5ec6c39:
> 
>   Merge branch 'agust at denx.de-next' of git://git.denx.de/u-boot-staging
> (2012-10-15 13:37:22 -0700)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 01968b96a24414ff8f0735111907cbb750c7af43:
> 
>   MX5: fix warning in clock.c (2012-10-26 16:11:32 +0200)
> 
> ----------------------------------------------------------------
> Beno?t Th?baudeau (4):
>       mx35: Clean up lowlevel_init
>       mx35: Fix eSDHC clocks
>       mxc: Fix SDHC multi-instance clock
>       mx25: Clean up imx-regs.h
> 
> Dirk Behme (1):
>       mx6qsabrelite: enable DCache and MMC bounce buffer
> 
> Eric Nelson (7):
>       i.MX: iomux: input pad array can be const
>       i.MX: declare iomux_v3_cfg_t arrays as const
>       i.MX video: struct fb_videomode can be const
>       i.MX: ipufb: add const to fb_videomode declarations
>       i.MX6: set drive strength for parallel RGB pads
>       i.MX6: add HDMI transmitter register declarations from kernel WIP.
>       i.MX6: mx6qsabrelite: Add splash screen support
> 
> Fabio Estevam (11):
>       mx6qsabreauto: Pass the board revision to the kernel
>       mx5: lowlevel_init.S: Split init_clock macro
>       mx5: lowlevel_init.S: Fix PLL settings for mx53
>       mx53loco: Adapt the IPU clock
>       configs: mx53loco: Remove CONFIG_HAS_ETH1
>       configs: mx51evk: Remove CONFIG_HAS_ETH1
>       configs: mx53evk: Remove CONFIG_HAS_ETH1
>       mx5: Add workaround for ARM erratum ID 468414
>       mx25pdk: Use internal RAM for stack pointer
>       mx6qsabre_common: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER
> 
> Otavio Salvador (1):
>       mx6qsabreauto: Change mmcroot so it works out of box
> 
> Stefano Babic (1):
>       MX5: fix warning in clock.c
> 
> Troy Kisky (7):
>       imximage: check dcd_len as entries added
>       imximage: remove redundant setting of app_dest_ptr
>       imximage: move flash_offset check to common location
>       imximage: fix size of image to load.
>       imximage: delay setting of image size
>       imximage: change parameters to set_imx_hdr
>       imximage: make set_imx_hdr_v1/v2 easier to read
> 
>  arch/arm/cpu/arm1136/mx35/generic.c             |   14 +-
>  arch/arm/cpu/armv7/mx5/clock.c                  |    2 +-
>  arch/arm/cpu/armv7/mx5/lowlevel_init.S          |  158 +++-
>  arch/arm/imx-common/iomux-v3.c                  |    5 +-
>  arch/arm/include/asm/arch-mx25/imx-regs.h       |    6 +-
>  arch/arm/include/asm/arch-mx35/clock.h          |    4 +-
>  arch/arm/include/asm/arch-mx35/lowlevel_macro.S |  191 ++--
>  arch/arm/include/asm/arch-mx5/imx-regs.h        |    4 +
>  arch/arm/include/asm/arch-mx6/imx-regs.h        |    6 +
>  arch/arm/include/asm/arch-mx6/mx6x_pins.h       |   58 +-
>  arch/arm/include/asm/arch-mx6/mxc_hdmi.h        | 1053
> +++++++++++++++++++++++
>  arch/arm/include/asm/imx-common/iomux-v3.h      |    3 +-
>  board/CarMediaLab/flea3/lowlevel_init.S         |   41 -
>  board/esg/ima3-mx53/ima3-mx53.c                 |    1 +
>  board/freescale/mx35pdk/lowlevel_init.S         |  119 +--
>  board/freescale/mx35pdk/mx35pdk.c               |    2 +
>  board/freescale/mx35pdk/mx35pdk.h               |   25 -
>  board/freescale/mx51evk/mx51evk.c               |    6 +-
>  board/freescale/mx53ard/mx53ard.c               |    4 +
>  board/freescale/mx53evk/mx53evk.c               |    4 +
>  board/freescale/mx53loco/mx53loco.c             |    5 +-
>  board/freescale/mx53smd/mx53smd.c               |    3 +
>  board/freescale/mx6qarm2/mx6qarm2.c             |   12 +-
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c   |   55 +-
>  board/freescale/mx6qsabrelite/mx6qsabrelite.c   |  350 +++++++-
>  board/freescale/mx6qsabresd/mx6qsabresd.c       |    7 +-
>  board/genesi/mx51_efikamx/efikamx.c             |   20 +-
>  board/ttcontrol/vision2/vision2.c               |    4 +-
>  drivers/mmc/fsl_esdhc.c                         |    5 +-
>  drivers/video/mxc_ipuv3_fb.c                    |    8 +-
>  include/configs/mx25pdk.h                       |   11 +-
>  include/configs/mx51evk.h                       |    1 -
>  include/configs/mx53evk.h                       |    1 -
>  include/configs/mx53loco.h                      |    3 +-
>  include/configs/mx6qarm2.h                      |    3 +-
>  include/configs/mx6qsabre_common.h              |    5 +-
>  include/configs/mx6qsabreauto.h                 |    3 +-
>  include/configs/mx6qsabrelite.h                 |   18 +-
>  include/configs/mx6qsabresd.h                   |    1 +
>  include/fsl_esdhc.h                             |    1 +
>  include/ipu_pixfmt.h                            |    4 +-
>  tools/imximage.c                                |  102 +--
>  tools/imximage.h                                |    6 +-
>  43 files changed, 1853 insertions(+), 481 deletions(-)
>  create mode 100644 arch/arm/include/asm/arch-mx6/mxc_hdmi.h
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

^ permalink raw reply	[flat|nested] 307+ messages in thread

* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2012-10-26 14:30 Stefano Babic
  2012-10-27 11:56 ` Albert ARIBAUD
  0 siblings, 1 reply; 307+ messages in thread
From: Stefano Babic @ 2012-10-26 14:30 UTC (permalink / raw)
  To: u-boot

Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit bd23b22badadcdc414a900828253961fc5ec6c39:

  Merge branch 'agust at denx.de-next' of git://git.denx.de/u-boot-staging
(2012-10-15 13:37:22 -0700)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 01968b96a24414ff8f0735111907cbb750c7af43:

  MX5: fix warning in clock.c (2012-10-26 16:11:32 +0200)

----------------------------------------------------------------
Beno?t Th?baudeau (4):
      mx35: Clean up lowlevel_init
      mx35: Fix eSDHC clocks
      mxc: Fix SDHC multi-instance clock
      mx25: Clean up imx-regs.h

Dirk Behme (1):
      mx6qsabrelite: enable DCache and MMC bounce buffer

Eric Nelson (7):
      i.MX: iomux: input pad array can be const
      i.MX: declare iomux_v3_cfg_t arrays as const
      i.MX video: struct fb_videomode can be const
      i.MX: ipufb: add const to fb_videomode declarations
      i.MX6: set drive strength for parallel RGB pads
      i.MX6: add HDMI transmitter register declarations from kernel WIP.
      i.MX6: mx6qsabrelite: Add splash screen support

Fabio Estevam (11):
      mx6qsabreauto: Pass the board revision to the kernel
      mx5: lowlevel_init.S: Split init_clock macro
      mx5: lowlevel_init.S: Fix PLL settings for mx53
      mx53loco: Adapt the IPU clock
      configs: mx53loco: Remove CONFIG_HAS_ETH1
      configs: mx51evk: Remove CONFIG_HAS_ETH1
      configs: mx53evk: Remove CONFIG_HAS_ETH1
      mx5: Add workaround for ARM erratum ID 468414
      mx25pdk: Use internal RAM for stack pointer
      mx6qsabre_common: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER

Otavio Salvador (1):
      mx6qsabreauto: Change mmcroot so it works out of box

Stefano Babic (1):
      MX5: fix warning in clock.c

Troy Kisky (7):
      imximage: check dcd_len as entries added
      imximage: remove redundant setting of app_dest_ptr
      imximage: move flash_offset check to common location
      imximage: fix size of image to load.
      imximage: delay setting of image size
      imximage: change parameters to set_imx_hdr
      imximage: make set_imx_hdr_v1/v2 easier to read

 arch/arm/cpu/arm1136/mx35/generic.c             |   14 +-
 arch/arm/cpu/armv7/mx5/clock.c                  |    2 +-
 arch/arm/cpu/armv7/mx5/lowlevel_init.S          |  158 +++-
 arch/arm/imx-common/iomux-v3.c                  |    5 +-
 arch/arm/include/asm/arch-mx25/imx-regs.h       |    6 +-
 arch/arm/include/asm/arch-mx35/clock.h          |    4 +-
 arch/arm/include/asm/arch-mx35/lowlevel_macro.S |  191 ++--
 arch/arm/include/asm/arch-mx5/imx-regs.h        |    4 +
 arch/arm/include/asm/arch-mx6/imx-regs.h        |    6 +
 arch/arm/include/asm/arch-mx6/mx6x_pins.h       |   58 +-
 arch/arm/include/asm/arch-mx6/mxc_hdmi.h        | 1053
+++++++++++++++++++++++
 arch/arm/include/asm/imx-common/iomux-v3.h      |    3 +-
 board/CarMediaLab/flea3/lowlevel_init.S         |   41 -
 board/esg/ima3-mx53/ima3-mx53.c                 |    1 +
 board/freescale/mx35pdk/lowlevel_init.S         |  119 +--
 board/freescale/mx35pdk/mx35pdk.c               |    2 +
 board/freescale/mx35pdk/mx35pdk.h               |   25 -
 board/freescale/mx51evk/mx51evk.c               |    6 +-
 board/freescale/mx53ard/mx53ard.c               |    4 +
 board/freescale/mx53evk/mx53evk.c               |    4 +
 board/freescale/mx53loco/mx53loco.c             |    5 +-
 board/freescale/mx53smd/mx53smd.c               |    3 +
 board/freescale/mx6qarm2/mx6qarm2.c             |   12 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c   |   55 +-
 board/freescale/mx6qsabrelite/mx6qsabrelite.c   |  350 +++++++-
 board/freescale/mx6qsabresd/mx6qsabresd.c       |    7 +-
 board/genesi/mx51_efikamx/efikamx.c             |   20 +-
 board/ttcontrol/vision2/vision2.c               |    4 +-
 drivers/mmc/fsl_esdhc.c                         |    5 +-
 drivers/video/mxc_ipuv3_fb.c                    |    8 +-
 include/configs/mx25pdk.h                       |   11 +-
 include/configs/mx51evk.h                       |    1 -
 include/configs/mx53evk.h                       |    1 -
 include/configs/mx53loco.h                      |    3 +-
 include/configs/mx6qarm2.h                      |    3 +-
 include/configs/mx6qsabre_common.h              |    5 +-
 include/configs/mx6qsabreauto.h                 |    3 +-
 include/configs/mx6qsabrelite.h                 |   18 +-
 include/configs/mx6qsabresd.h                   |    1 +
 include/fsl_esdhc.h                             |    1 +
 include/ipu_pixfmt.h                            |    4 +-
 tools/imximage.c                                |  102 +--
 tools/imximage.h                                |    6 +-
 43 files changed, 1853 insertions(+), 481 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-mx6/mxc_hdmi.h

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 307+ messages in thread

end of thread, other threads:[~2018-11-19 13:26 UTC | newest]

Thread overview: 307+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <c8534adc-a94d-44b5-b702-6888788a33a4@email.android.com>
2018-05-17 17:08 ` [U-Boot] [PULL] Please pull u-boot-imx Stefano Babic
2018-05-17 20:15   ` Tom Rini
2018-05-17 21:52     ` Lukasz Majewski
2018-10-23  7:52 Stefano Babic
2018-10-23 14:29 ` Tom Rini
2018-10-23 14:42   ` Stefano Babic
2018-10-23 14:52     ` Tom Rini
2018-10-24 13:38       ` Stefano Babic
2018-10-25  8:37         ` Stefano Babic
  -- strict thread matches above, loose matches on Subject: below --
2018-09-19 15:16 Stefano Babic
2018-09-20 13:24 ` Tom Rini
2018-09-04  7:11 Stefano Babic
2018-09-05 15:49 ` Tom Rini
2018-09-06  9:23 ` Peter Robinson
2018-09-06  9:33   ` Stefano Babic
2018-09-06 12:37     ` Peter Robinson
2018-09-06 13:28       ` Fabio Estevam
2018-09-06 15:42         ` Baruch Siach
2018-09-06 15:52           ` Fabio Estevam
2018-09-06 16:28             ` Peter Robinson
2018-11-13 13:42             ` Ricardo Salveti
2018-11-14  7:07               ` Baruch Siach
2018-11-16  1:05                 ` Ricardo Salveti
2018-11-16 14:16                   ` Peter Robinson
2018-11-18  9:51                     ` Baruch Siach
2018-11-18 19:43                       ` Ricardo Salveti
2018-11-18 20:29                         ` Baruch Siach
2018-11-18 23:09                           ` Ricardo Salveti
2018-11-19  1:35                         ` Fabio Estevam
2018-11-19  7:44                         ` Baruch Siach
2018-11-19 11:17                           ` Fabio Estevam
2018-11-19 13:26                             ` Peter Robinson
2018-08-31 13:04 Stefano Babic
2018-08-31 13:07 ` Tom Rini
2018-08-31 18:53   ` Otavio Salvador
2018-08-31 19:20     ` Stefano Babic
2018-08-31 19:26       ` Otavio Salvador
2018-08-31 19:26   ` Stefano Babic
2018-09-01 11:37 ` Tom Rini
2018-09-02 13:20   ` Sébastien Szymanski
2018-09-02 14:15     ` Tom Rini
2018-09-03  7:47       ` Stefano Babic
2018-09-02 17:06   ` Stefano Babic
2018-09-02 17:11     ` Tom Rini
2018-09-02 17:29       ` Stefano Babic
2018-07-23  9:44 Stefano Babic
2018-07-23 18:16 ` Tom Rini
2018-06-27 15:01 Stefano Babic
2018-06-28  2:21 ` Tom Rini
2018-05-18  6:51 Stefano Babic
2018-05-19  2:23 ` Tom Rini
2018-05-21  3:04   ` Tom Rini
2018-05-17 15:50 Stefano Babic
2018-04-30 10:51 Stefano Babic
2018-04-30 16:15 ` Tom Rini
2018-04-15 10:28 Stefano Babic
2018-04-15 17:52 ` Tom Rini
2018-04-15 19:53   ` Lukasz Majewski
2018-03-11 15:07 Stefano Babic
2018-03-11 19:30 ` Tom Rini
2018-03-09 10:13 Stefano Babic
2018-03-09 10:42 ` Fabio Estevam
2018-03-09 11:11   ` Stefano Babic
2018-03-09 11:31     ` Fabio Estevam
2018-02-24 15:58 Stefano Babic
2018-02-26  3:28 ` Tom Rini
2018-02-04 11:34 Stefano Babic
2018-02-05  0:16 ` Tom Rini
2018-02-05  3:57   ` Tom Rini
2018-02-05  8:34     ` Stefano Babic
2018-01-15 17:52 Stefano Babic
2018-01-16  0:00 ` Tom Rini
2018-01-16  9:40   ` Stefano Babic
2018-01-08 16:54 Stefano Babic
2018-01-08 17:38 ` Tom Rini
2018-01-08 17:50   ` Stefano Babic
2018-01-08 21:26     ` Tom Rini
2018-01-08 21:26 ` Tom Rini
2017-12-29 10:51 Stefano Babic
2017-12-30  1:19 ` Tom Rini
2017-12-17 10:39 Stefano Babic
2017-12-17 19:26 ` Tom Rini
2017-12-17 21:32   ` Stefano Babic
2017-12-18  0:04   ` Fabio Estevam
2017-12-18  1:45     ` Peng Fan
2017-11-27 10:04 Stefano Babic
2017-11-28 14:19 ` Tom Rini
2017-11-09 10:35 Stefano Babic
2017-11-10  3:20 ` Tom Rini
2017-10-31 10:53 Stefano Babic
2017-11-01  1:26 ` Tom Rini
2017-10-12 16:29 Stefano Babic
2017-10-12 22:29 ` Tom Rini
2017-09-20 13:47 Stefano Babic
2017-09-21  2:18 ` Tom Rini
2017-08-30 10:35 Stefano Babic
2017-09-01 16:42 ` Tom Rini
2017-08-16 11:18 Stefano Babic
2017-08-17  1:17 ` Tom Rini
2017-07-14 15:46 Stefano Babic
2017-07-18 22:49 ` Tom Rini
2017-06-27  7:53 Stefano Babic
2017-06-27 17:32 ` Tom Rini
2017-05-18 10:16 Stefano Babic
2017-04-13  8:01 Stefano Babic
2017-04-14 21:08 ` Tom Rini
2017-03-19 17:07 Stefano Babic
2017-03-20  0:34 ` Tom Rini
2017-02-27 17:08 Stefano Babic
2017-03-01 15:38 ` Tom Rini
2017-02-27  9:12 Stefano Babic
2017-02-27 13:22 ` Tom Rini
2017-02-27 13:29   ` Stefano Babic
2017-02-27 13:30     ` Tom Rini
2017-02-27 16:05     ` Peter Robinson
2017-02-27 16:41     ` Fabio Estevam
2017-02-27 17:02       ` Stefano Babic
2017-02-27 17:04         ` Tom Rini
2017-02-28  4:09 ` Jagan Teki
2017-02-28 15:01   ` Tom Rini
2017-02-01 15:50 Stefano Babic
2017-02-02  3:20 ` Tom Rini
2017-01-02 17:08 Stefano Babic
2017-01-03  1:04 ` Tom Rini
2016-12-18 17:48 Stefano Babic
2016-12-19 21:18 ` Tom Rini
2016-11-30 10:57 Stefano Babic
2016-12-01  0:44 ` Tom Rini
2016-10-28 14:44 Stefano Babic
2016-10-29  1:59 ` Tom Rini
2016-10-07 15:38 Stefano Babic
2016-10-08 17:08 ` Tom Rini
2016-09-06  8:51 Stefano Babic
2016-09-06 15:27 ` Tom Rini
2016-09-06 15:50   ` Stefano Babic
2016-07-28 11:56 Stefano Babic
2016-07-29 13:29 ` Tom Rini
2016-06-18  9:14 Stefano Babic
2016-06-19 14:12 ` Tom Rini
2016-06-07 16:44 Stefano Babic
2016-06-18  9:12 ` Stefano Babic
2016-06-19 14:02 ` Tom Rini
2016-05-17 15:57 Stefano Babic
2016-05-19 12:08 ` Tom Rini
2016-05-19 12:49   ` Stefano Babic
2016-04-25 12:26 Stefano Babic
2016-04-26  0:15 ` Tom Rini
2016-04-13 10:23 Stefano Babic
2016-04-13 19:47 ` Tom Rini
2016-03-02 13:57 Stefano Babic
2016-03-02 23:14 ` Tom Rini
2016-02-04  9:44 Stefano Babic
2016-02-04 17:39 ` Tom Rini
2016-01-25 14:07 Stefano Babic
2016-01-25 21:27 ` Tom Rini
2016-01-08 15:08 Stefano Babic
2016-01-09  3:34 ` Tom Rini
2016-01-09 19:15 ` Fabio Estevam
2016-01-10  9:54   ` Stefano Babic
2016-01-03 15:23 Stefano Babic
2016-01-04 15:50 ` Tom Rini
2015-12-04 11:57 Stefano Babic
2015-12-04 22:51 ` Tom Rini
2015-11-16 11:26 Stefano Babic
2015-11-16 17:59 ` Tom Rini
2015-10-15  9:32 Stefano Babic
2015-10-15 12:43 ` Tom Rini
2015-10-15 12:49   ` Stefano Babic
2015-10-15 13:04     ` Tom Rini
2015-10-13  8:16 Stefano Babic
2015-10-13 12:39 ` Tom Rini
2015-10-02  9:11 Stefano Babic
2015-10-03  0:35 ` Tom Rini
2015-09-24  9:45 Stefano Babic
2015-09-24 21:10 ` Tom Rini
2015-09-13  9:22 Stefano Babic
2015-09-13 13:56 ` Tom Rini
2015-09-02  9:57 Stefano Babic
2015-09-02 13:18 ` Tom Rini
2015-09-02 13:45   ` Stefano Babic
2015-09-02 14:12     ` Stefano Babic
2015-09-02 21:58       ` Tom Rini
2015-08-02  9:23 Stefano Babic
2015-08-02 15:53 ` Tom Rini
2015-07-03 12:22 Stefano Babic
2015-07-06 15:24 ` Tom Rini
2015-06-08  7:14 Stefano Babic
2015-06-08 21:53 ` Tom Rini
2015-05-26 14:18 Stefano Babic
2015-05-26 17:37 ` Tom Rini
2015-05-15 15:18 Stefano Babic
2015-05-16 11:36 ` Tom Rini
2015-04-28 15:01 Stefano Babic
2015-04-29 14:28 ` Tom Rini
2015-04-13  6:36 Stefano Babic
2015-04-13 14:05 ` Tom Rini
2015-03-31 13:48 Stefano Babic
2015-04-01  0:55 ` Tom Rini
2015-03-18  9:23 Stefano Babic
2015-03-19 13:11 ` Tom Rini
2015-03-05  9:45 Stefano Babic
2015-03-05 14:00 ` Tom Rini
2015-02-10 12:19 Stefano Babic
2015-02-10 20:09 ` Tom Rini
2014-12-30 16:55 Stefano Babic
2015-01-01 14:55 ` Tom Rini
2014-12-10  9:36 Stefano Babic
2014-12-10 21:40 ` Tom Rini
2014-11-24 11:18 Stefano Babic
2014-11-24 22:13 ` Tom Rini
2014-11-14 14:48 Stefano Babic
2014-11-17  0:45 ` Tom Rini
2014-11-05 17:01 Stefano Babic
2014-11-05 20:04 ` Tom Rini
2014-10-27 12:32 Stefano Babic
2014-10-27 14:32 ` Tom Rini
2014-10-08  8:17 Stefano Babic
2014-10-08 20:51 ` Albert ARIBAUD
2014-09-12 14:03 Stefano Babic
2014-09-16 13:31 ` Albert ARIBAUD
2014-09-16 13:34   ` Fabio Estevam
2014-09-16 13:50   ` Stefano Babic
2014-09-16 14:38 ` Albert ARIBAUD
2014-09-16 15:07   ` Stefano Babic
2014-09-17  8:29     ` Albert ARIBAUD
2014-09-17  7:12   ` Nikita Kiryanov
2014-09-17 21:33 ` Albert ARIBAUD
2014-08-20 14:13 Stefano Babic
2014-07-10 13:28 Stefano Babic
2014-07-11 18:54 ` Tom Rini
2014-06-26  8:25 [U-Boot] [PULL] : " Stefano Babic
2014-07-01  5:51 ` Albert ARIBAUD
2014-06-17 17:03 Stefano Babic
2014-06-25  9:48 ` Albert ARIBAUD
2014-06-25 10:05   ` Stefano Babic
2014-06-25 13:16     ` Albert ARIBAUD
2014-06-25 13:52       ` Stefano Babic
2014-05-15  9:02 Stefano Babic
2014-05-16 17:35 ` Albert ARIBAUD
2014-04-07 16:20 Stefano Babic
2014-04-07 17:51 ` Albert ARIBAUD
2014-04-05 12:08 Stefano Babic
2014-04-05 14:46 ` Albert ARIBAUD
2014-04-02 16:54 Stefano Babic
2014-04-02 18:00 ` Albert ARIBAUD
2014-04-03  6:31   ` Albert ARIBAUD
2014-04-03  7:32     ` Stefano Babic
2014-04-04 13:52       ` Stefano Babic
2014-04-05  8:22         ` Albert ARIBAUD
2014-04-05 11:03           ` Albert ARIBAUD
2014-04-05 12:09             ` Stefano Babic
2014-03-12 10:44 Stefano Babic
2014-03-13 17:27 ` Albert ARIBAUD
2014-02-19 10:04 Stefano Babic
2014-02-19 15:05 ` Albert ARIBAUD
2014-01-17  9:26 Stefano Babic
2014-01-17 17:27 ` Fabio Estevam
2014-01-17 22:03   ` Tom Rini
2014-01-18 12:20     ` Albert ARIBAUD
2014-01-20 22:58 ` Tom Rini
2014-01-15  9:43 Stefano Babic
2014-01-15 15:14 ` Albert ARIBAUD
2014-01-14  9:34 Stefano Babic
2014-01-14 13:03 ` Albert ARIBAUD
2014-01-02 16:25 Stefano Babic
2013-09-27 12:11 Stefano Babic
2013-10-02 13:36 ` Albert ARIBAUD
2013-09-03  8:20 Stefano Babic
2013-09-05 10:04 ` Albert ARIBAUD
2013-08-12 13:47 Stefano Babic
2013-07-12  9:48 Stefano Babic
2013-06-28 15:05 Stefano Babic
2013-06-28 20:38 ` Albert ARIBAUD
2013-06-06 15:55 Stefano Babic
2013-06-08 13:27 ` Albert ARIBAUD
2013-05-07  7:55 Stefano Babic
2013-05-11  7:30 ` Albert ARIBAUD
2013-04-14  9:34 Stefano Babic
2013-04-14 13:09 ` Albert ARIBAUD
2013-04-14  7:27 Stefano Babic
2013-04-14  9:21 ` Albert ARIBAUD
2013-04-04  8:31 Stefano Babic
2013-04-04 10:31 ` Albert ARIBAUD
2013-03-15 13:54 Stefano Babic
2013-03-15 18:51 ` Albert ARIBAUD
2013-03-15 20:16   ` Otavio Salvador
2013-03-16 11:16     ` Stefano Babic
2013-03-13  8:43 Stefano Babic
2013-03-13 12:29 ` Albert ARIBAUD
2013-01-28 22:25 Stefano Babic
2013-02-02 22:08 ` Albert ARIBAUD
2013-01-14  8:40 Stefano Babic
2013-01-14 16:54 ` Albert ARIBAUD
2013-01-05 17:36 Stefano Babic
2013-01-08 14:50 ` Albert ARIBAUD
2012-12-07 17:07 Stefano Babic
2012-12-08  9:34 ` Albert ARIBAUD
2012-12-08 14:16   ` Stefano Babic
2012-12-21 20:46     ` Albert ARIBAUD
2012-12-21 21:35       ` stefano babic
2012-12-23 16:47         ` Albert ARIBAUD
2012-11-24 15:29 Stefano Babic
2012-11-25 18:49 ` Albert ARIBAUD
2012-11-10  7:55 Stefano Babic
2012-11-10  8:34 ` Albert ARIBAUD
2012-10-26 14:30 Stefano Babic
2012-10-27 11:56 ` Albert ARIBAUD

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.