All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Lindner <mareklindner@neomailbox.ch>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Subject: [B.A.T.M.A.N.] [PATCH v2 6/7] batman-adv: ELP - use tp meter to estimate the throughput if otherwise not available
Date: Fri, 18 May 2018 09:47:53 +0800	[thread overview]
Message-ID: <20180518014754.23644-7-mareklindner@neomailbox.ch> (raw)
In-Reply-To: <20180518014754.23644-1-mareklindner@neomailbox.ch>

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
---
 net/batman-adv/bat_v_elp.c | 63 ++++++++++++++++++++++++++++++++++++--
 net/batman-adv/bat_v_elp.h | 21 +++++++++++++
 net/batman-adv/main.h      |  1 +
 net/batman-adv/tp_meter.c  | 37 +++++++++++++++++-----
 net/batman-adv/types.h     | 14 +++++++++
 5 files changed, 126 insertions(+), 10 deletions(-)

diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index 71c20c1d..3f0d7816 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -51,6 +51,7 @@
 #include "originator.h"
 #include "routing.h"
 #include "send.h"
+#include "tp_meter.h"
 
 /**
  * batadv_v_elp_start_timer() - restart timer for ELP periodic work
@@ -67,6 +68,41 @@ static void batadv_v_elp_start_timer(struct batadv_hard_iface *hard_iface)
 			   msecs_to_jiffies(msecs));
 }
 
+/**
+ * batadv_v_elp_tp_start() - start a tp meter session for a neighbor
+ * @neigh: neighbor to run tp meter on
+ */
+static void batadv_v_elp_tp_start(struct batadv_hardif_neigh_node *neigh)
+{
+	struct batadv_hard_iface *hard_iface = neigh->if_incoming;
+	struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface);
+
+	neigh->bat_v.tp_meter_running = true;
+	batadv_tp_start(bat_priv, neigh->addr, neigh, 10, NULL, BATADV_TP_ELP);
+}
+
+/**
+ * batadv_v_elp_tp_fail() - handle tp meter session failure
+ * @neigh: neighbor to run tp meter on
+ */
+void batadv_v_elp_tp_fail(struct batadv_hardif_neigh_node *neigh)
+{
+	neigh->bat_v.tp_meter_running = false;
+}
+
+/**
+ * batadv_v_elp_tp_finish() - post-process tp meter results
+ * @neigh: neighbor tp meter on
+ * @throughput: tp meter throughput result
+ */
+void batadv_v_elp_tp_finish(struct batadv_hardif_neigh_node *neigh,
+			    u32 throughput)
+{
+	neigh->bat_v.tp_meter_throughput = throughput;
+	neigh->bat_v.last_tp_meter_run = jiffies;
+	neigh->bat_v.tp_meter_running = false;
+}
+
 /**
  * batadv_v_elp_get_throughput() - get the throughput towards a neighbour
  * @neigh: the neighbour for which the throughput has to be obtained
@@ -78,6 +114,7 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
 {
 	struct batadv_hard_iface *hard_iface = neigh->if_incoming;
 	struct ethtool_link_ksettings link_settings;
+	u32 last_tp_run_msecs, last_tp_run_jiffies;
 	struct net_device *real_netdev;
 	struct station_info sinfo;
 	u32 throughput;
@@ -112,10 +149,13 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
 			 */
 			return 0;
 		}
+
+		/* unsupported WiFi driver */
 		if (ret)
-			goto default_throughput;
+			goto fallback_throughput;
+
 		if (!(sinfo.filled & BIT(NL80211_STA_INFO_EXPECTED_THROUGHPUT)))
-			goto default_throughput;
+			goto fallback_throughput;
 
 		return sinfo.expected_throughput / 100;
 	}
@@ -152,6 +192,25 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
 			return throughput * 10;
 	}
 
+fallback_throughput:
+	last_tp_run_jiffies = jiffies - neigh->bat_v.last_tp_meter_run;
+	last_tp_run_msecs = jiffies_to_msecs(last_tp_run_jiffies);
+
+	/* check the tp_meter_running flag before checking the timestamp to
+	 * avoid a race condition where a new tp meter session is scheduled
+	 * right after the previous tp meter session has completed
+	 */
+	if (!neigh->bat_v.tp_meter_running &&
+	    last_tp_run_msecs > BATADV_ELP_TP_RUN_INTERVAL)
+		batadv_v_elp_tp_start(neigh);
+
+	/* discard too old tp test results */
+	if (last_tp_run_msecs > 2 * BATADV_ELP_TP_RUN_INTERVAL)
+		neigh->bat_v.tp_meter_throughput = 0;
+
+	if (neigh->bat_v.tp_meter_throughput)
+		return neigh->bat_v.tp_meter_throughput;
+
 default_throughput:
 	if (!(hard_iface->bat_v.flags & BATADV_WARNING_DEFAULT)) {
 		batadv_info(hard_iface->soft_iface,
diff --git a/net/batman-adv/bat_v_elp.h b/net/batman-adv/bat_v_elp.h
index e8c7b7fd..4ffb1fde 100644
--- a/net/batman-adv/bat_v_elp.h
+++ b/net/batman-adv/bat_v_elp.h
@@ -21,6 +21,8 @@
 
 #include "main.h"
 
+#include <linux/types.h>
+
 struct sk_buff;
 struct work_struct;
 
@@ -33,4 +35,23 @@ int batadv_v_elp_packet_recv(struct sk_buff *skb,
 			     struct batadv_hard_iface *if_incoming);
 void batadv_v_elp_throughput_metric_update(struct work_struct *work);
 
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+
+void batadv_v_elp_tp_fail(struct batadv_hardif_neigh_node *neigh);
+void batadv_v_elp_tp_finish(struct batadv_hardif_neigh_node *neigh,
+			    u32 throughput);
+
+#else
+
+static inline void batadv_v_elp_tp_fail(struct batadv_hardif_neigh_node *neigh)
+{
+}
+
+static inline void
+batadv_v_elp_tp_finish(struct batadv_hardif_neigh_node *neigh, u32 throughput)
+{
+}
+
+#endif /* CONFIG_BATMAN_ADV_BATMAN_V */
+
 #endif /* _NET_BATMAN_ADV_BAT_V_ELP_H_ */
diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h
index 89dfaf87..ed4ae913 100644
--- a/net/batman-adv/main.h
+++ b/net/batman-adv/main.h
@@ -69,6 +69,7 @@
 #define BATADV_ELP_MIN_PROBE_SIZE 200 /* bytes */
 #define BATADV_ELP_PROBE_MAX_TX_DIFF 100 /* milliseconds */
 #define BATADV_ELP_MAX_AGE 64
+#define BATADV_ELP_TP_RUN_INTERVAL 60000 /* milliseconds */
 #define BATADV_OGM_MAX_ORIGDIFF 5
 #define BATADV_OGM_MAX_AGE 64
 
diff --git a/net/batman-adv/tp_meter.c b/net/batman-adv/tp_meter.c
index 87aaeb1d..ec47ca79 100644
--- a/net/batman-adv/tp_meter.c
+++ b/net/batman-adv/tp_meter.c
@@ -24,7 +24,7 @@
 #include <linux/byteorder/generic.h>
 #include <linux/cache.h>
 #include <linux/compiler.h>
-#include <linux/err.h>
+#include <linux/errno.h>
 #include <linux/etherdevice.h>
 #include <linux/gfp.h>
 #include <linux/if_ether.h>
@@ -33,9 +33,9 @@
 #include <linux/kernel.h>
 #include <linux/kref.h>
 #include <linux/list.h>
+#include <linux/log2.h>
 #include <linux/netdevice.h>
 #include <linux/param.h>
-#include <linux/printk.h>
 #include <linux/random.h>
 #include <linux/rculist.h>
 #include <linux/rcupdate.h>
@@ -51,6 +51,7 @@
 #include <uapi/linux/batadv_packet.h>
 #include <uapi/linux/batman_adv.h>
 
+#include "bat_v_elp.h"
 #include "hard-interface.h"
 #include "log.h"
 #include "netlink.h"
@@ -225,6 +226,7 @@ static void batadv_tp_caller_notify(struct batadv_priv *bat_priv,
 				    enum batadv_tp_meter_reason reason)
 {
 	u32 total_bytes;
+	u64 throughput;
 	u32 test_time;
 	u32 cookie;
 	bool reason_is_error;
@@ -251,6 +253,21 @@ static void batadv_tp_caller_notify(struct batadv_priv *bat_priv,
 
 		break;
 	case BATADV_TP_ELP:
+		if (reason_is_error) {
+			batadv_v_elp_tp_fail(tp_vars->hardif_neigh);
+			return;
+		}
+
+		test_time = jiffies_to_msecs(jiffies - tp_vars->start_time);
+		total_bytes = atomic64_read(&tp_vars->tot_sent);
+
+		/* The following calculation includes these steps:
+		 * - convert bytes to bits
+		 * - divide bits by the test length (msecs)
+		 * - convert result from bits/ms to 0.1Mb/s (* 1024 * 10 / 1000)
+		 */
+		throughput = total_bytes * 8 >> ilog2(test_time) / 10;
+		batadv_v_elp_tp_finish(tp_vars->hardif_neigh, throughput);
 		break;
 	default:
 		break;
@@ -264,11 +281,14 @@ static void batadv_tp_caller_notify(struct batadv_priv *bat_priv,
  * @reason: reason for tp meter session stop
  * @dst: destination of tp_meter session
  * @cookie: cookie of tp_meter session
+ * @hardif_neigh: neighbor towards which the test was ran (for one-hop test)
  */
-static void batadv_tp_caller_init_error(struct batadv_priv *bat_priv,
-					enum batadv_tp_meter_caller caller,
-					enum batadv_tp_meter_reason reason,
-					const u8 *dst, u32 cookie)
+static void
+batadv_tp_caller_init_error(struct batadv_priv *bat_priv,
+			    enum batadv_tp_meter_caller caller,
+			    enum batadv_tp_meter_reason reason, const u8 *dst,
+			    u32 cookie,
+			    struct batadv_hardif_neigh_node *hardif_neigh)
 {
 	switch (caller) {
 	case BATADV_TP_USERSPACE:
@@ -276,6 +296,7 @@ static void batadv_tp_caller_init_error(struct batadv_priv *bat_priv,
 					      cookie);
 		break;
 	case BATADV_TP_ELP:
+		batadv_v_elp_tp_fail(hardif_neigh);
 		break;
 	default:
 		break;
@@ -981,7 +1002,7 @@ void batadv_tp_start(struct batadv_priv *bat_priv, const u8 *dst,
 			   "Meter: too many ongoing sessions, aborting (SEND)\n");
 		batadv_tp_caller_init_error(bat_priv, caller,
 					    BATADV_TP_REASON_TOO_MANY, dst,
-					    session_cookie);
+					    session_cookie, neigh);
 		return;
 	}
 
@@ -989,7 +1010,7 @@ void batadv_tp_start(struct batadv_priv *bat_priv, const u8 *dst,
 	if (!tp_vars) {
 		batadv_tp_caller_init_error(bat_priv, caller,
 					    BATADV_TP_REASON_MEMORY_ERROR, dst,
-					    session_cookie);
+					    session_cookie, neigh);
 		return;
 	}
 
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 0a9bee88..148f23ad 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -583,6 +583,20 @@ struct batadv_hardif_neigh_node_bat_v {
 
 	/** @metric_work: work queue callback item for metric update */
 	struct work_struct metric_work;
+
+	/**
+	 * @tp_meter_running: tp meter measurements towards this neighbor in
+	 * progress
+	 */
+	unsigned char tp_meter_running:1;
+
+	/**
+	 * @last_tp_meter_run: timestamp of last tp meter measurement completion
+	 */
+	unsigned long last_tp_meter_run;
+
+	/** @tp_meter_throughput: throughput information measured by tp meter */
+	unsigned long tp_meter_throughput;
 };
 
 /**
-- 
2.17.0


  parent reply	other threads:[~2018-05-18  1:47 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-18  1:47 [B.A.T.M.A.N.] [PATCH v2 0/7] B.A.T.M.A.N. V - fallback to tp meter estimation if throughput otherwise not available Marek Lindner
2018-05-18  1:47 ` [B.A.T.M.A.N.] [PATCH v2 1/7] batman-adv: tp_meter - prevent concurrent tp_meter sessions by using workqueue Marek Lindner
2018-08-29  6:56   ` Sven Eckelmann
2018-05-18  1:47 ` [B.A.T.M.A.N.] [PATCH v2 2/7] batman-adv: tp_meter - don't check for existing session Marek Lindner
2018-05-18  1:47 ` [B.A.T.M.A.N.] [PATCH v2 3/7] batman-adv: tp_meter - allow up to 10 queued sessions Marek Lindner
2018-05-18  1:47 ` [B.A.T.M.A.N.] [PATCH v2 4/7] batman-adv: tp_meter - add caller distinction Marek Lindner
2018-05-18  1:47 ` [B.A.T.M.A.N.] [PATCH v2 5/7] batman-adv: tp_meter - add option to perform one-hop test Marek Lindner
2018-05-18  1:47 ` Marek Lindner [this message]
2018-05-21 13:17   ` [B.A.T.M.A.N.] [PATCH v2 6/7] batman-adv: ELP - use tp meter to estimate the throughput if otherwise not available Linus Lüssing
2018-05-21 17:51     ` Sven Eckelmann
2018-05-21 19:06     ` Sven Eckelmann
2018-08-04  9:31       ` Antonio Quartulli
2018-05-21 14:43   ` Linus Lüssing
2018-08-04  9:35     ` Marek Lindner
2018-05-21 14:48   ` Linus Lüssing
2018-08-04  9:39     ` Antonio Quartulli
2018-05-21 15:01   ` Linus Lüssing
2018-08-04  8:59     ` Antonio Quartulli
2018-05-21 16:36   ` Sven Eckelmann
2018-05-18  1:47 ` [B.A.T.M.A.N.] [PATCH v2 7/7] batman-adv: ELP - add throughput meter test duration attribute Marek Lindner
2018-05-21 13:46   ` Linus Lüssing
2018-05-21 13:57     ` Linus Lüssing
2018-08-04  9:05     ` Marek Lindner
2018-05-21 14:34   ` Sven Eckelmann
2018-08-04  8:41     ` Antonio Quartulli
     [not found]       ` <314bf0ac-4c10-da7a-d527-45afe92423fa-2CpIooy/SPIKlTDg6p0iyA@public.gmane.org>
2018-08-04  9:02         ` Sven Eckelmann
2018-08-04  9:02           ` [B.A.T.M.A.N.] " Sven Eckelmann
2018-08-04  9:08           ` Antonio Quartulli
2018-08-04  9:08             ` [B.A.T.M.A.N.] " Antonio Quartulli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180518014754.23644-7-mareklindner@neomailbox.ch \
    --to=mareklindner@neomailbox.ch \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.